Kenwood DVD Player DVF 3070 User Manual

DVD/VCD/CD PLAYER

DVF-3070

INSTRUCTION MANUAL

B60-5357-08 00 (E/X/Y)

02/12

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DVF-3070 (EN/E,X,Y)

Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit

was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original

carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Please confirm that the following accessories are present.

Audio video cord (Red, White, Yellow) ...(1)

Remote control unit ...(1)

Batteries (R6/"AA" -size) ...(2)

Preparations

Coaxial cable ...(1)

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution : Read this page carefully to ensure safe operation.

IMPORTANT SAFEGUARDS

DVF-3070 (EN/E,X,Y)

Please read all of the safety and operating instructions before

operating this appliance. Adhere to all warnings on the appliance

and in the instruction manual. Follow all the safety and operating

instructions. These safety and operating instructions should be

retained for future reference.

10. Lightning – For added protection for this appliance during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the appliance due to lightning and power-line

surges.

1. Power sources – The appliance should be connected to a

power supply only of the type described in the instruction

manual or as marked on the appliance. If you are not sure of

the type of power supply to your home, consult your appliance

dealer or local power company. For appliances intended to

operate from battery power, or other sources, refer to the

instruction manual.

11. Abnormal smell – If an abnormal smell or smoke is detected,

immediately turn the power OFF and unplug the appliance

from the wall outlet. Contact your dealer or nearest service

center.

12. Damagerequiringservice–Theapplianceshouldbeserviced

by qualified service personnel when:

2. Power-cord protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, pay particular attention to

cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the

appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by

following the instruction manual. Adjust only those controls

that are covered by the instruction manual as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the appliance to its normal operation.

3. Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the appliance

and to protect it from overheating, and these openings must

notbeblockedorcovered. Theapplianceshouldbesituatedso

that its location or position does not interfere with its proper

ventilation.

E. Theappliancehasbeendropped,ortheenclosuredamaged.

F. The appliance exhibits a marked change in performance.

Tomaintaingoodventilation,donotputrecordsoratable-cloth

on the appliance. Place the appliance at least 10 cm away from

the walls.

Do not use the appliance on a bed, sofa, rug or similar surface

that may block the ventilation openings. This appliance should

notbeplacedinabuilt-ininstallationsuchasabookcaseorrack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

13. Servicing

–

The user should not attempt to service the

appliance beyond that described in the instruction manual. All

otherservicingshouldbereferredtoqualifiedservicepersonnel.

14. Power lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

lightorpowercircuits, orwhereitcanfallintosuchpowerlines

orcircuits.Wheninstallinganoutsideantennasystem,extreme

care should be taken to keep from touching such power lines

or circuits as contact with them might be fatal.

4. Water and moisture – The appliance shall not be exposed to

drippingandsplashing-forexample,nearabathtub,washbowl,

kitchen sink, laundry tub, in a wet basement, or near a

swimming pool, etc. Do not place an object containing liquid,

such as a flower vase, on the appliance.

15. AC outlets – Do not connect other audio equipment with a

power consumption larger than that specified to the AC outlet

on the rear panel. Never connect other electrical appliances,

such as an iron or toaster, to it to prevent fire or electric shock.

5. Temperature – The appliance may not function properly if

used at extremely low, or freezing temperatures. The ideal

ambient temperature is above +5°C (41°F).

16. Overloading – Do not overload wall outlets, extension cords,

or integral convenience receptacles as this can result in a risk

of fire or electric shock.

6. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other

appliances (including amplifiers) that produce heat. Do not

place a flaming object, such as a candle or lantern, on or near

the appliance.

17. Attachment – Do not use attachments not recommended by

the appliance manufacturer as they may cause hazards.

18. Replacement parts – When replacement parts are required,

be sure the service technician has used replacement parts

specifiedbythemanufacturerorhavethesamecharacteristics

as the original parts. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

7. Electric shock – Care should be taken so that objects do not

fallandliquidisnotspilledintotheenclosurethroughopenings.

If a metal objects, such as a hair pin or a needle, comes into

contact with the inside of this appliance, a dangerous electric

shock may result. For families with children, never permit

childrentoputanything,especiallymetal,insidethisappliance.

19. Safety check – Upon completion of any service or repairs to

this appliance, ask the service technician to perform safety

checks to determine that the appliance is in proper operating

condition.

8. Enclosure removal – Never remove the enclosure. If the

internalpartsaretouchedaccidentally, aseriouselectricshock

might occur.

9. Cleaning – Unplug this appliance from the wall outlet before

cleaning. Do not use volatile solvents such as alcohol, paint

thinner, gasoline, or benzine, etc. to clean the cabinet. Use a

clean dry cloth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special features and Contents

DVF-3070 (EN/E,X,Y)

Special features

This document classifies the applications of each feature using the following marks.

: Description of a feature that can be used with DVD.

: Description of a feature that can be used with CD.

: Description of a feature that can be used with VCD.

Higher video quality than S-VHS video and LaserDisc

Higher audio quality than music CD

On screen Display (OSD)

Preparations

MP3 and JPEG files playback

Caution : Read the pages marked

carefully to ensure safe operation.

Contents

Select Subtitle Language .................................................................... 22

Select Disc Menu Language ............................................................... 22

Select Parental level ............................................................................ 23

Change Password ................................................................................. 23

Put back to the Defalt Setting............................................................. 24

DVD menu language code list ............................................................ 25

Preparations

Introduction......................................................................................... 2

Before applying power .................................................................. 2

Safety precautions .......................................................................... 2

IMPORTANT SAFEGUARDS ...................................................... 4

Special features and Contents........................................................ 5

Special features ...................................................................................... 5

Contents ..................................................................................................... 5

Discs information .............................................................................. 6

Types of playable discs ......................................................................... 6

Unplayable discs ..................................................................................... 6

Icons on the DVD VIDEO discs ............................................................. 6

Region Codes ...................................................................................... 7

Region codes in the world .................................................................... 7

Video formats...................................................................................... 8

Important items .................................................................................. 9

Maintenance ............................................................................................ 9

Reference .................................................................................................. 9

System Connections ........................................................................ 10

Connecting to a TV with video (composite) input terminal ......... 10

Connecting to a TV with S-video input terminal ............................ 10

Connecting to a TV with SCART input terminal

Operations

Playback of disc .............................................................................. 26

Basic play ............................................................................................... 26

Disc playback features ........................................................................ 27

On screen display.................................................................................. 28

Various playback functions........................................................... 29

Select Audio Language ........................................................................ 29

Select the Audio channel .................................................................... 29

Select Subtitle Language .................................................................... 29

Select Subtitle on or off ....................................................................... 29

Select Camera angle ........................................................................... 30

Random play ........................................................................................... 30

Repeat play ............................................................................................. 31

A-B Repeat play ..................................................................................... 31

Using Bookmarks .................................................................................. 32

Using IntroScan function ..................................................................... 32

Program play..................................................................................... 33

Menu playback................................................................................. 36

Hierarchical structure of VCD menus ............................................... 36

Playback without using the menu playback function

(For Europe) ........................................................................................ 11

Connecting to a TV with Component input terminals

(For some areas)................................................................................ 11

Connecting to an Audio component .................................................. 11

Controls and indicators .................................................................. 12

Operation of remote control unit .................................................. 13

Set Up functions ............................................................................... 14

Preparation for Set Up......................................................................... 14

Set up menu ............................................................................................ 14

Select TV Display .................................................................................. 16

Select Picture Mode ............................................................................. 16

Select ANGLE mark ON or OFF ........................................................... 17

Select OSD Language ........................................................................... 17

Select CAPTIONS ON or OFF (NTSC only)........................................ 18

Select Screen Saver on or off............................................................. 18

Select Audio Output .............................................................................. 19

Select LPCM Output .............................................................................. 19

Select Dynamic Range ......................................................................... 20

Select VIDEO Output ............................................................................. 21

Select Audio Language ........................................................................ 21

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ..................... 37

MP3 /JPEG media playback .......................................................... 38

Guidance of MP3/JPEG ........................................................................ 38

Playing back MP3/JPEG files ............................................................. 39

Selects the files to be played back directly.................................... 40

Rotating a picture (JPEG files only) .................................................. 40

MP3/JPEG Repeat play ....................................................................... 41

MP3/JPEG Random play ..................................................................... 41

MP3/JPEG program playback ............................................................. 42

Knowledge

In case of difficulty.......................................................................... 44

Specifications .................................................................................. 46

Download from Www.Somanuals.com. All Manuals Search And Download.

Discs information

DVF-3070 (EN/E,X,Y)

Types of playable discs

The system using this unit does not only play music from CD but can also play the discs listed below to offer you

high-quality entertainment of video of movies and live concerts.

Playable Disc

DVD VIDEO

CD (CD-R, CD-RW)

VCD (SVCD*)

Logo mark on disc

Disc size

8cm

12cm

Played sides

One or both

One side only

Max. 20 min.

One side only

Approx. 41 min.

(1 side, 1 layer)

Approx. 75 min.

(1 side, 2 layers)

Approx. 82 min.

(2 sides, 1 layer)

Approx. 150 min.

(2 sides, 2 layers)

Approx. 133 min.

(1 side, 1 layer)

Approx. 242 min.

(1 side, 2 layers)

Approx. 266 min.

(2 sides, 1 layer)

Approx. 484 min.

(2 sides, 2 layers)

Max. 74 min.

Video + Audio

(In case of an SVCD, the possible play-

back time becomes shorter.)

Max. 20 min., digital Max. 80 min., digital

Audio

MP3 media and JPEG picture CD those can be played back with this equipment (CD-R, CD-RW)

÷* This unit can play SVCDs, but some functions will not work.

÷This unit can play DVD-R, DVD+R, DVD-RW, and DVD+RW discs, but depending on the recording unit, the disc

manufacturer, etc., playback sometimes may not be possible.

÷ThisunitmayalsobeincapableofplayingcertainCD-R/RWdiscsdependingontheirproperties,recordingconditions,etc.

Unplayable discs

This player cannot play back any of the following discs.

DVD AUDIO discs

VSD discs

DVD-ROM discs

CDV discs (Only the audio part can be reproduced.)

CD-G/CD-EG/CD-EXTRA discs (Only the audio can be

reproduced.)

DVD-RAM discs

SACD discs

CD-ROM discs (Except MP3 and JPEG discs [ ISO 9660

level 1] )

Photo CD discs (Never attempt to play them.)

÷ A DVD VIDEO disc with a region code which does not match this unit or without a region code. For details, see "Region

Codes".

÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video

Formats".

Icons on the DVD VIDEO discs

Icon

Description

Indicates the region code where the disc can be played.

Number of voice languages recorded with the audio function. The number in the icon indicates the number of

voice languages. (Max. 8 languages)

Numberofsubtitlelanguagesrecordedwiththesubtitlefunction. Thenumberintheiconindicatesthenumber

of subtitle languages. (Max. 32 languages)

Numberofanglesprovidedbytheanglefunction.Thenumberintheiconindicatesthenumberofangles.(Max.

9 angles)

Aspectratiosthatcanbeselected."NORMAL/LB"standsforLetterBoxand"NORMAL/PS"forPan/Scan.

In the example on the left, the 16:9 video can be converted into letter box video.

Download from Www.Somanuals.com. All Manuals Search And Download.

Region Codes

DVF-3070 (EN/E,X,Y)

Every player of this model has a certain region code assigned to it based on the country where the player is used.

When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region

codes matching the region code of the player.

The region code for this player is described on the rear panel of the player.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the follow-

ing map.

Preparations

Professional use disc

(Air Line cabin service)

Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player

shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below.

EvenwhenaDVDVIDEOdiscdoesnotcarryanyindicationoftheregioncode, itmaysometimesunabletobeplayed

on this player due to certain restrictions.

Restrictions due to difference between discs

SomeDVDandVCDdiscscanbeplayedonlyincertainplaybackmodesaccordingtotheinten-

Inhibition icon

tions of the software producers. As this player plays discs according to their intentions, some

functions may not work as intended by you. Please be sure to read the instructions provided

with each disc. When an inhibition icon is displayed on the TV screen connected to the player,

it indicates that the disc being played is under the restriction as described above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video formats

DVF-3070 (EN/E,X,Y)

TV formats of major countries

The TV picture display and disc signal systems can be

divided roughly into two TV formats (NTSC and PAL).

TV Format

Major Countries & Areas

Japan, Taiwan, Korea, USA, Canada,

Mexico, Philippines, Chile, etc.

NTSC

They are variable depending on countries and areas.

China, U.K., Germany, Australia, New

Zealand, Kuwait, Singapore, etc.

PAL

(For Europe and Australia)

This unit has a function for changing the video format according to the TV type. ($) The initial setting of this unit

for "TV Type" is PAL. Please confirm the type of your TV.

(For other countries)

This unit has a function for changing the video format according to the TV type. ($) The initial setting of this unit

for "TV Type" is NTSC. Please confirm the type of your TV.

Checking the Video Format ("Select TV Type" $)

Check the video format of the TV to be useed

When the video formats are different :

Try playing the disc. If the video formats of the disc and TV

do not match, the played video may be black and white or

become as shown below.

Top and bottom edges are not

displayed.

Top and bottom areas are dark.

Picture turbulence due to sync

unmatching.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important items

DVF-3070 (EN/E,X,Y)

Maintenance

Maintenance of the unit

In regard to contact cleaner

Whenthefrontpanelorcasebecomesdirty,wipewithasoft, Do not use contact cleaners because it could cause a malfunction.

dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for

agents may cause discoloration.

they may deform the plastic component.

Reference

Disc handling precautions

Never play a cracked or warped disc

Preparations

During playback, the disc rotates at high speed in the player. Therefore,

to avoid danger, never use a cracked or deformed disc or a disc repaired

with tape or adhesive agent. Please do not use discs which are not

round because they may cause malfunction.

Handling

Hold the disc so that you do not touch the

playing surface.

Label side

Playing side

Disc accessories

Sticker

The disc accessories (stabilizer, protection sheet, protection ring, etc.)

which are marketed for improving the sound quality or protecting discs

as well as the disc cleaner should not be used with this system because

they may cause malfunction.

Do not attach paper or tape to either the

playing side or the label side of the disc.

Sticky paste

Cleaning

If there are fingerprint marks or foreign matter

found on the disc, lightly wipe the disc with a

soft cotton cloth (or similar) from the center of

the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long pe-

riod of time, remove it from the player and

store it in its case.

Note related to transportation and movement

Before transporting or moving this unit, carry out the

following operations.

Caution on condensation

Condensation(ofdew)mayoccurinsidetheunitwhenthereisagreat

differenceintemperaturebetweenthisunitandtheoutside.Thisunit

maynotfunctionproperlyifcondensationoccurs. Inthiscase, leave

theunitforafewhoursandrestarttheoperationafterthecondensa-

tion has dried up.

1. Set the POWER ON/OFF switch to the ON

without loading a disc.

2. Wait a few seconds and verify that the display

shown appears.

Bespeciallycautiousagainstcondensationinthefollowingcircum-

stances:

When this unit is carried from one place to another across a large

difference in temperature, when the humidity in the room where

this unit is installed increases, etc.

3. Set the POWER ON/OFF switch to OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DVF-3070 (EN/E,X,Y)

Make connections as shown below.

When connecting the related system components, re-

fer also to the instruction manuals of the related com-

ponents.

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though

all connections have been made properly, reset the microcomputer

Caution:

Do not plug in the power lead until all connections are com-

pleted.

referring to "In case of difficulty".

CAUTION

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

Do not place any objects impairing heat radiation onto the top of the unit.

Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.

Top panel : 50 cm Side pannel : 10 cm Back panel : 10 cm

Connecting to a TV with video (composite) input terminal

(For Europe)

(For other countries)

Audio video cord

Connecting to a TV with S-video input terminal

(For Europe)

(For other countries)

Audio video cord

S-video cord

Audio video cord

S-video cord

Connecting to a TV with SCART input terminal(For Europe)

SCART cable

Video cord

When connecting to the S-VIDEO terminal, the SCART terminal, or the COMPONENT VIDEO OUTPUT terminal of this

unit, also connect the composite video cord. In addition, perform the VIDEO OUTPUT setting at the SETUP MENU

screen. ("Select VIDEO OUTPUT" ))

NNoottee

When SCART (or COMPONENT) terminal connection is made without connecting the composite video cord and this

unit is set to S-VIDEO, the monitor will not display correctly. (The setting cannot be changed to RGB or COMPONENT)

DTS disclaimer clause

When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible

damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is

connected to an amplification system.

To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to

the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DVF-3070 (EN/E,X,Y)

Connecting to a TV with Component input terminals (For some areas)

[ For some areas ]

SelectthescanningmethodoftheComponent

Video output using the COMPONENT VIDEO

OUTPUT switch on the rear panel.

Audio cord

INTERLACE: Scanning method is fixed at inter-

laced scanning.

Component cords

PROGRESSIVE: When progressive scanning is

unavailable with certain discs, the scanning

method is switched automatically to interlaced

scanning. When the scanning method is

changed, the scanning status will be displayed

for a few seconds.

Preparations

Connecting to an Audio component

For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-

nection.

(For Europe)

AV receiver or

AV Amplifier

Coaxial or Optical cable

Audio cord

Video cord or S-video cord

(For other countries)

AV receiver or

AV Amplifier

Coaxial or Optical cable

Audio cord

Video cord, S-video cord or Component cords

When connecting to the S-VIDEO terminal, the SCART terminal, or the COMPONENT VIDEO OUTPUT terminal of this

unit, also connect the composite video cord. In addition, perform the VIDEO OUTPUT setting at the SETUP MENU

screen. ("Select VIDEO OUTPUT"))

NNoottee

When SCART (or COMPONENT) terminal connection is made without connecting the composite video cord and this

unit is set to S-VIDEO, the monitor will not display correctly. (The setting cannot be changed to RGB or COMPONENT)

1. In case an associated system component is connected, also read the instruction manual of the component.

2. Insert the optical-fiber cable straight into the connector until it clicks.

3. Never bend or bundle the optical-fiber cable.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

DVF-3070 (EN/E,X,Y)

RESUME indicator

INTRO SCAN indicator

PROGRAM indicator

P.B.C. indicator

TITLE indicator

CHAPTER indicator

TRACK indicator

HOUR indicator

PLAY/PAUSE indicator

MINUTE indicator

SECOND indicator

SEARCH indicator

RANDOM indicator

REPEAT indicators

REPEAT

DVD indicator

VCD indicator

REPEAT 1

REPEAT ALL

REPEAT A-B

Character information

display section

CD indicator

MP3 indicator

ThislightswhenanMP3or

a JPEG disc is set.

Display

POWER

OFF

1 POWER ON / OFF switch $§

5 1, ¡(Search) keys

6 6(Play/Pause) key

7 7(Stop) key

2 Disc tray

3 0(Open/Close) key

4 4(PREV.), ¢(NEXT) (Skip) keys

CAUTION

The power in this equipment will not be

completely cut off from the AC wall outlet

when the main switch is turned OFF.

DIMMER function

Thedisplaybrightnessofthemainunitcanbechanged.

Switching as shown below is done each time the DIMMER

key on the remote control is pressed.

DIMMER

1 Bright

2 Dim 1

3 Dim 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of remote control unit

DVF-3070 (EN/E,X,Y)

The keys on the remote control unit with the same names as on the main

unit have the same function as the keys on the main unit.

1 Numeric keys £•

8 REPEAT key

2 CLEAR key

º⁄‹·∼q

ON SCREEN

TOP MENU

3 SUBTITLE key

A-B Repeat key

9 DIMMER key

0 MENU key

⁄

(SUBTITLE) ON/OFF key

AUDIO

ANGLE

CLEAR

ON/OFF

4 Cursor Up (5), Down (∞),

Left (2) and Right (3) keys

^∼¢

^∼¢§

SUBTITLE

! ON SCREEN key

@ TOP MENU key

•

Preparations

MULTI CONTROL

5 P.MODE key

‹w

§¤

RANDOM key

# AUDIO key

$ ANGLE key

% RETURN key

ENTER key

P.MODE

RANDOM

RETURN

ENTER

º¤q

SLOW

STEP

6 SLOW (Back slow/

Forward slow) keys

STEP (Back step/

Forward step) keys

•

^∼¢‹›·‚

^ 7(Stop) key

REPEAT

A-B

DIMMER

7 1 key/¡ key (Search

6(Play/Pause) key

key)

4 (PREV.) key/¢

(NEXT) key (Skip key)¶

Model : RC-D0307 (Infrared ray system)

Loading batteries

1 Remove the cover.

2 Insert batteries.

3 Close the cover.

÷ Insert two R6/LR6 (“AA”-size) batteries

following the polarity indications.

Operation

Remote

sensor

Insert the power plug into a power outlet, press the

POWER ON / OFF switch of the main unit to ON, then

press the desired remote control key.

Operating range

(approx.)

÷ When pressing more than one remote control keys succes-

sively, press the keys securely by leaving an interval of 1 sec-

ond or more between pressing of keys.

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

NNootteess

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,

malfunction may occur. In such a case, change the installation position to avoid malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Preparation for Set Up

1Set the POWER ON/OFF switch

2Set TV Format according to the connected TV type.

While no disc is inserted, hold the 7(Stop) key

on the main unit depressed and keep pressing

the ANGLE key on the remote control. Each

time these keys are being held down, the set-

ting changes as follows.

to the ON (

) position.

(Initial Settings 8)

REMOTE

MAIN UNIT

÷ After the power is switched ON,

there is a delay of about 3 sec-

onds before the display is lit.

ANGLE

1 MULTI (NTSC/PAL switchable)

2 NTSC

3 PAL

Set up menu

The SETUP functions are the following diverse functions. Please change them according to your use environment.

GENERAL SETUP

TV DISPLAY

This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.

NORMAL/PS (Pan Scan)

Choose this setting if you want the movie to fill the entire screen of your TV. You won't see part of the picture

(particularly the right and left edge).

Some disc produced in a wide screen format can't be cropped in this fashion, which means the black bars

would appear at the top and the bottom of the screen.

NORMAL/LB (Letter Box)

Choose this setting if you would prefer to see movies in their original aspect ratio. You will see the entire frame

of the movie, but it will occupy a smaller portion of the screen. This setting may result in the movie appearing

with black bars at the top and bottom of the screen.

WIDE

Choose this setting if your DVD player is connected to a widescreen TV.

PIC MODE

This adjusts the screen quality according to the material being played back.

AUTO

The picture quality is adjusted automatically.

FILM

Choose this setting to reproduce the picture quality of FILM material.

VIDEO

Choose this setting to reproduce the picture quality of VIDEO material.

SMART

Choose this setting to reproduce progressive and interlaced materials with limited motion.

SSMART

Choose this setting to reproduce progressive and interlaced materials with motion (motion adaptiv

deinterlacing).

ANGLE MARK

When this is set to ON, the ANGLE mark (

) will be displayed when a multiangle scene is reached during

(

OFF

)

playback of a DVD.

OSD LANG

This switches the language for the on-screen display.

( ENGLISH )

CAPTIONS (NTSC only)

This switches the CLOSED CAPTION ON or OFF.

(

OFF

)

“closed caption” is a subtitle display system developed for hearing-impaired persons, but it is also a very

effective system for learning foreign languages. When your TV is compatible with “closed caption” and you

select ON, you can use the CLOSED CAPTION function.

SCR SAVER

How to use the RETURN key

(

OFF

)

This switches the screen saver ON or OFF.

When the RETURN key is

pressed, the display returns

to the MAIN PAGE.

When SCR SAVER is ON, the screen saver function will

operate after approx. 3 minutes have passed with a still

picture (display of KENWOOD).

RETURN

The items in

are the initial set values.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

AUDIO SETUP

AUDIO OUT

This selects the format of the audio output from the DIGITAL OUT terminal.

SPDIF/RAW

Choose this when connecting to an amplifier with built-in Dolby digital or DTS decoder.

When a DVD recorded with Dolby digital or DTS is played back, a bitstream signal will be put out. When a disc

recorded with linear PCM is played back, a linear PCM signal will be put out.

SPDIF/PCM

Choose this for PCM output.

When a DVD recorded with Dolby digital is played back, output will be made converted to 2-channel PCM. In

case of a DVD recorded with DTS, output will be made as bitstream.

Preparations

LPCM OUTPUT

This selects the clock frequency for linear PCM output.

LPCM 48k

Sets the linear PCM output to 48 kHz.

Even in case of 96 kHz digital signal, DVD will deliver 48 kHz signal out.

LPCM 96k

In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96

kHz signal. Depending on the disc, output of a 96 kHz signal may be prohibited. In such a case, the output will be

converted down to a 48 kHz signal.

DYNAMIC

At the time of Dolby digital DVD playback, the differece of the maximum volume and the minimun volume are

compressed. Adjustment is possible in 8 steps, and the range is largest (compression ratio 0) at the time of "OFF" and

smallest (large compression ratio) at the time of "FULL". ( OFF )

PREFERENCES

VIDEO OUTPUT

Choose "S-VIDEO" in case of connection to the S-VIDEO terminals on the rear, choose "RGB" in case of connection to

the AV terminal or choose "COMPONENT" in case of connection to COMPONENT terminal. Output will not be made to

the not selected terminals. (0!) ( S-VIDEO )

AUDIO

Choose the language for the AUDIO output.

( ENGLISH *)

SUB TITLE

Choose the language for SUB TITLE.

( ENGLISH *)

DISC MENU

Choose the language for the menu recorded on the DISC. ( ENGLISH *)

PARENTAL

This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.

However, even when a DVD disc is marked "Adult-oriented" or so on the label, its viewing cannot be

restricted unless the restriction level is recorded in the disc itself. ( 8 )

Parental lock level;

Level 8: All DVDs can be played back.(Factory preset)

Level 7 to 2: DVDs for general audiences/children can be played back. (DVDs for adults are prohibited.)

Level 1: DVDs for children can be played back. (DVDs for adults/general audiences are prohibited.)

PASSWORD

The password for PARENTAL setting, change, cancellation, etc. is set.

DEFAULTS

This resets all settings, except for PARENTAL and PASSWORD, to the factory defaults.

When the language marked with an asterisk (*) is specified by the disc, that specification has priority.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select TV Display

Select Picture Mode

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select TV DISPLAY, then press the Cursor

right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select PIC MODE, then press the Cursor right

(3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select TV Display type, then press the ENTER

to select specific mode, then press the ENTER

key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select ANGLE mark ON or OFF

Select OSD Language

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

Preparations

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select ANGLE MARK, then press the Cursor

right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select OSD LANG, then press the Cursor right

(3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select ON or OFF, then press the ENTER key.

to select specific language, then press the EN-

TER key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select CAPTIONS ON or OFF

(NTSC only)

SelectScreenSaveron

or off

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the GENERAL SETUP, then

press the ENTER key to access the sub fea-

tures

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select CAPTIONS, then press the Cursor right

(3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select SCR SAVER, then press the Cursor

right (3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select ON or OFF, then press the ENTER key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select Audio Output

Select LPCM Output

LPCM 48k : Even in case of 96 kHz digital signal,

DVD will deliver 48 kHz signal out.

1 During stop mode, press MENU key on the re-

mote.

LPCM 96k : In case of 96 kHz digital signal, DVD will

deliver 96 kHz signal out. In this case your

receiver should control 96 kHz signal.

1 During stop mode, press MENU key on the re-

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the AUDIO SETUP, then press

the ENTER key to access the sub features

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the AUDIO SETUP, then press

the ENTER key to access the sub features

Preparations

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select AUDIO OUT, then press the Cursor

right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select LPCM OUTPUT, then press the Cursor

right (3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select specific output mode, then press the

ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific output mode, then press the

ENTER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select Dynamic Range

This function operates only at the time of playback of

DVDs recorded with Dolby Digital.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the AUDIO SETUP, then press

the ENTER key to access the sub features

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select DYNAMIC, then press the Cursor right

(3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select specific dynamic range, then press the

ENTER key.

MULTI CONTROL

ENTER

5 Press Cursor left (2) key on the remote to return

to previous menu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select VIDEO Output

Select Audio Language

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

Preparations

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select VIDEO OUTPUT, then press the Cursor

right (3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select AUDIO, then press the Cursor right (3)

key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select S.VIDEO or Cr, Cb, Y, then press the

ENTER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific language, then press the EN-

TER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

To select other language

1 Select "OTHER" and press the ENTER key.

2 Input 4 digit code by press numeric keys on

the remote.

5 Press Cursor left (2) key on the remote to return

to previous menu.

3 Press the ENTER key.

6 Press Cursor up/down (5/∞) keys on the remote

(DVD menu language code list ∞)

to select MAIN PAGE, then press the ENTER key.

5 Press Cursor left (2) key on the remote to return

to previousmenu.

MULTI CONTROL

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select Subtitle Language

Select Disc Menu Language

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select SUBTITLE, then press the Cursor right

(3) key to access the sub features

3 Press Cursor up/down (5/∞) keys on the remote

to select DISC MENU, then press the Cursor

right (3) key to access the sub features

MULTI CONTROL

4 Press Cursor up/down (5/∞) keys on the remote

to select specific language, then press the EN-

TER key.

4 Press Cursor up/down (5/∞) keys on the remote

to select specific language, then press the EN-

TER key.

MULTI CONTROL

ENTER

To select other language

1 Select "OTHER" and press the ENTER key.

2 Input 4 digit code by press numeric keys on

the remote.

1 Select "OTHER" and press the ENTER key.

2 Input 4 digit code by press numeric keys on

the remote.

3 Press the ENTER key.

(DVD menu language code list ∞)

5 Press Cursor left (2) key on the remote to return

to previousmenu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Select Parental level

Change Password

This part of DVD rating lets you determine how your

playerwillreactdiscsthatcontainmoviesthatarerated

(in the U.S.A. the Motion Pictures Association of

America rates movies as G, PG, PG-13, etc.).

1 During stop mode, press MENU key on the re-

mote.

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

Preparations

MULTI CONTROL

ENTER

MULTI CONTROL

3 Press Cursor up/down (5/∞) keys on the remote

to select PASSWORD, then press the Cursor

right (3) key to access the sub features

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select PARENTAL, then press the Cursor right

(3) key to access the sub features

MULTI CONTROL

4 press the ENTER key to select CHANGE.

5 Enter old password, new password and enter

new password again to confirm, then press the

ENTER key. (The password set at the time of ship-

ping from the factory is "0000".)

4 Press Cursor up/down (5/∞) keys on the remote

to select specific level, then press the ENTER

key.

MULTI CONTROL

ENTER

5 Enter the password, then press the ENTER key.

The password set at the time of shipping from the

factory is "0000".

Refer to the item "Change Password" when the

password is to be changed.

ENTER

6 Press Cursor left (2) key on the remote to return

6 Press Cursor up/down (5/∞) keys on the remote

to previousmenu.

to select MAIN PAGE, then press the ENTER key.

7 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

8 Press Cursor up/down (5/∞) keys on the remote

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

Please refer to pages 14 and 15 for setup.

Put back to the Defalt

Setting

1 During stop mode, press MENU key on the re-

mote.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the PREFERENCE, then press the

ENTER key to access the sub features

MULTI CONTROL

ENTER

3 Press Cursor up/down (5/∞) keys on the remote

to select DEFAULTS, then press the Cursor right

(3) key to access the sub features

MULTI CONTROL

4 press the ENTER key to select RESET.

ENTER

5 Press Cursor left (2) key on the remote to return

to previousmenu.

6 Press Cursor up/down (5/∞) keys on the remote

to select MAIN PAGE, then press the ENTER key.

MULTI CONTROL

ENTER

7 Press Cursor up/down (5/∞) keys on the remote

to select EXIT SETUP, then press the ENTER key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,T,X,Y)

DVD menu language code list

Code No.

Language

Code No.

Language

Code No.

Language

1482

1483

1489

1491

1495

1498

1501

1502

1503

1505

1506

1507

1508

1509

1511

1512

1513

1514

1515

1516

1517

1521

1525

1527

1528

1529

1531

1532

1534

1535

1538

1539

1540

1543

1557

1564

1572

1581

1587

1613

1632

1665

1684

1697

Kirundi

1239

1245

1248

1253

1254

1257

1261

1269

1283

1287

1297

1298

1299

1300

1301

1305

1307

1311

1313

1326

1327

1332

1334

1345

1347

1349

1350

1352

1353

1356

1357

1358

1363

1365

1369

1376

1379

1393

1403

1408

1417

1428

1435

1436

1463

1481

Interlingue

Inupiak

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

1027

1028

1032

1039

1044

1045

1051

1052

1053

1057

1059

1060

1069

1066

1067

1070

1079

1093

1097

1103

1105

1109

1130

1142

1144

1145

1149

1150

1151

1157

1165

1166

1171

1174

1181

1183

1186

1194

1196

1203

1209

1217

1226

1229

1233

1235

Afar

Romanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangro

Serbo-Croatian

Shinghalese

Slovak

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali; Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Preparations

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Latin

Lingala

Welsh

Danish

German

Bhutani

Greek

Laothian

Lithuanian

"Latvian, Lettish"

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Tegulu

Tajik

Thai

English

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faeroese

French

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Twi

Ukrainian

Urdu

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

Polish

Hindi

"Pashto, Pushto"

Portuguese

Quechua

Rhaeto-Romance

Croatian

Hungarian

Armenian

Interlingua

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of disc

Various playback functions

DVF-3070 (EN/E,X,Y)

Basic play

TOP MENU key

6(Play/Pause) key

Preparation

MAIN UNIT

POWER

POWER ON/ OFF switch

Disc tray

OFF

0(open/close) key

÷ Set the POWER ON/OFF switch to the ON (

) position.

÷ After the power is switched ON, there is a delay of about

7(Stop) key

3 seconds before the display is lit.

(PLAY/PAUSE) key

Load a disc.

MAIN UNIT

Label side

1 Open the tray.

2 Place a disc.

Start playback.

TITLE No. (DVD)

MAIN UNIT

REMOTE

CHAPTER No. (DVD)

Time display

TRACK No. (CD/VCD)

÷ Each press pauses and plays the disc alternately.

÷ When the 6key or open/close (0) key is pressed while a

tray is open, the tray closes automatically, and then playback

begins.

When a menu screen is recorded on the DVD disc,

the menu screen will be displayed when the TOP

MENU key or MENU key is pressed. At the menu

screen, the menu can be selected by pressing the

Cursor keys.

When a Disc Menu appears on the screen

NNoottee In case of interactive DVDs, a Disc Menu appears on the

screen. Then press ENTER to select specific menu you

want to play by using Cursor keys.

TOP MENU

To stop playback

RESUME playback (only DVD)

MAIN UNIT

REMOTE

Whenthe7(Stop)keyhasbeenpressedonceduring

playback to stop the playback, and then playback is

startedagain,playwillstartfromthepointwherethe

playback had been stopped. This is called the RE-

SUME function. When the 7 (Stop) key is pressed

againduringstop,theRESUMEfunctioniscancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various plaPylbaaycbkacfuknocftidoinscs

DVF-3070 (EN/E,X,Y)

Disc playback features

NNootteess

6(Play/Pause) key

STEP keys

÷ You won't hear the sound (audio) on the DVD and VCD when

you're using the Skip, Search, Step or Slow motion features.

÷ Playback features are not available during the opening cred-

its of a movie.

1, ¡

(Search)

keys

4, ¢

(Skip) keys

1, ¡(Search) keys

4, ¢(Skip) keys

6(Play/Pause) key

Skipping chapters or tracks

÷ The chapter (or track) in the direction of the key pressed is

skipped, and the selected chapter (or track) will be played

from the beginning.

MAIN UNIT

REMOTE

÷ When the 4key is pressed once during playback, the chap-

ter (or track) being played will be played from the beginning.

÷ The Chapter feature won't work if the disc isn't for-

matted with separate chapters.

NNoottee

4: To skip backward

¢: To skip forward

Searching

Operations

÷ During playback, press the 1 or ¡key.

÷ Each press switches the searching speed.

MAIN UNIT

REMOTE

1 FF 2 X (¡key) or FR 2 X (1key)

2 FF 4 X (¡key) or FR 4 X (1key)

3 FF 8 X (¡key) or FR 8 X (1key)

4 FF 16X (¡key) or FR 16X (1key)

5 Normal playback

1: To search backward (FR)

¡: To search forward (FF)

÷ Press the 6key at any time to resume normal playback.

STEP (freeze frame and frame advance)

÷ During playback, press the STEP keys.

÷ Each time you press the keys, the picture advances one

frame.

REMOTE

STEP

÷ Press the 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various plaPylbaaycbkacfuknocftidoinscs

DVF-3070 (EN/E,X,Y)

SLOW keys

Numeric keys

ON SCREEN key

6(Play/Pause) key

ENTER key

6(Play/Pause) key

Slow motion playback

÷ During playback, press the SLOW keys.

÷ Each press switches the motion speed.

REMOTE

(At the time of DVD playback)

1 SF 1/4 (

2 SF 1/8 (

3 SF 1/16 (

key) or SR 1/4 (

key) or SR 1/8(

key) or SR 1/16 (

key)

SLOW

4 Normal playback

(At the time of VCD playback)

(Slow Reverse is not possible)

1 SF 1 /4 (

2 SF 1 /8 (

3 SF 1 /16 (

key)

4 Normal playback

÷ Press the 6key to resume normal playback.

Playback from desired track or title

BecauseDVDVIDEOdiscsusedigitaltechnology,atitlecanbedividedintoindividualchapters(similartotracksonaCD).

÷ Select the desired track No. (CD, VCD) or title No. (DVD)

REMOTE

1 Press the numeric keys as shown below

(Example) To select track No. 23 : 23

2 Press the ENTER key.

÷ P.B.C. on mode of VCD, the Selecting a Track func-

tion may not work. ‡

NNootteess

ENTER

On screen display

Theelapsedtimeortheremainingtimeforthechapterorthe

track can be displayed on the monitor (TV) screen.

Press the ON SCREEN key on the remote.

At the time of CD/VCD playback.

1 "SINGLE ELAPSED"

Elapsed time of the track being played.

(Example) 22:23 TRACK 05/15

Each press the key switches the display.

2 "SINGLE REMAIN"

Remaining time of the track being played.

3 "TOTAL ELAPSED"*

At the time of DVD playback.

1 Title number and chapter number display.

(Example) TITLE 01/02 CHAPTER 05/15

Elapsed time of the disc being played.

4 "TOTAL REMAIN"*

00:05:12 (elapsed time of the title)

ON SCREEN

2 "TITLE REMAIN"

Remaining time of the title being played.

3 "CHAPTER ELAPSED"

Elapsed time of the chapter being played.

4 "CHAPTER REMAIN"

Remaining time of the disc being played.

5 "OFF"

Items marked by * are not displayed in P.B.C. on mode

of VCD.

Remaining time of the chapter being played.

5 "OFF"

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DVF-3070 (EN/E,X,Y)

Select Audio Language

If the disc was created with different language tracks,

you can use the AUDIO KEY on the remote to tempo-

rarily change the DVD player’s Audio setting.

Select Subtitle Language

You can change the Subtitle language while you’re

watching a disc (but only if the disc was created

with subtitles).

During playback, press the AUDIO key on the re-

mote.

During playback, press the SUBTITLE key on the

remote.

AUDIO

SUBTITLE

ＳＵＢＴＩＴＬＥ　０３/０３：ＦＲＥＮＣＨ

The language is switched each time the AUDIO

key is pressed.

The language is switched each time the SUB-

TITLE key is pressed.

Operations

÷ The display is switched off when no operation is per-

formed for about 2 seconds.

÷ The display is switched off when no operation is per-

formed for about 2 seconds.

1. The language feature only works if the disc was cre-

1. The subtitle feature only works if the disc was cre-

NNootteess

ated with multiple audio tracks.

NNootteess

ated with multiple subtitle tracks.

2. When you chose an audio language by the AUDIO

key, you only override the audio language setting in

the DVD Player's main menu (in the Language Pref-

erences menu within Setup menu) temporarily.

2. The subtitle menu of the disc appears in some discs.

Select the Audio channel

Select Subtitle on or off

When the SUBTITLE ON/OFF key is pressed, subtitles

will be displayed. Switching between display of sub-

titles and no display of subtitles is done each time the

key is pressed.

You can choose to play back only the right or the left

channelofaudiorecordedonthedisc, oryoucanselect

stereo playback.

During VCD playback, press AUDIO key on the

remote.

Press SUBTITLE ON/OFF key on the remote.

AUDIO

ON/OFF

Each press the key switches the mode.

1 LEFT

2 RIGHT

3 STEREO

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DVF-3070 (EN/E,X,Y)

Select Camera angle

Some disc contains multiple angles particular scene or

sequence. If the disc only has one angle, this feature

won’t work.

Random play

The tracks of the disc are played in random order.

1 During stop mode, press the RANDOM key on

the remote.

1 During playback, press the ANGLE key on the

RANDOM

remote.

ANGLE

The Random Play display appears

Lit

Display

Each time you press RANDOM key on the remote,

random play would be on and off.

2 Press the play pause (6) key to start random

playback.

÷ The menu is switched off when no operation is per-

formed for about 2 seconds.

"MP3/JPEG Random play"

2 Select the Camera angle with press the ANGLE

key.

To cancel random play

1 Press the stop (7) key to stop playback.

2 Press the RANDOM key to cancel random play-

back.

To repeat random play

During random playback, press the REPEAT

key on the remote.

REPEAT

÷ The display is switched off when no operation is performed

for about 2 seconds.

Each press the key switches the mode.

1 REPEAT ONE

2 REPEAT ALL

3 REPEAT OFF

NNootteess

÷ After all tracks of a disc have been played in random order,

playback will stop.

÷ When playing a DVD, the Random mode does not work.

÷ When switching to RANDOM mode with a VCD in P.B.C. ON

mode, the P.B.C. mode will become OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DVF-3070 (EN/E,X,Y)

Repeat play

A-B Repeat play

The A-B repeat function lets you mark a segment to re-

peat between the beginning "A" and the end "B" of the

segment you want to replay.

Desired title, chapter, track or disc can be played back

repeatedly.

At the time of DVD playback.

÷"CHAPTER REPEAT" : Repeat the chapter that is playing.

÷"TITLE REPEAT"

: Repeat the title that is playing.

1 Press the A-B key on the remote when you want

to choose a scene (sound) as the beginning

point.

At the time of CD/VCD playback.

÷"REPEAT ONE" : Repeat the track that is playing.

÷"REPEAT ALL" : Repeat the disc that is playing.

During playback, press the REPEAT key on the

remote.

A-B

Lit

REPEAT

Each press the key switches the REPEAT mode

At the time of DVD playback.

Display

1 "CHAPTER REPEAT ON" : Display lit "REPEAT 1"

2 "TITLE REPEAT ON" : Display lit "REPEAT ALL"

3 "REPEAT OFF"

2 Press the A-B key again to choose a scene

At the time of CD/VCD playback.

(sound) as the end point.

Operations

1 "REPEAT ONE" : Display lit "REPEAT 1"

2 "REPEAT ALL" : Display lit "REPEAT ALL"

3 "REPEAT OFF"

A-B

The Repeat B (Repeat A-B) display appears

At the time of REPEAT mode

"REPEAT" is light.

Lit

Display

÷ To cancel repeat playback, press the REPEAT key and

select "REPEAT OFF".

÷ The menu is switched off when no operation is per-

formed for about 2 seconds.

÷ To cancel A-B Repeat playback, press the A-B key.

÷ The menu is switched off when no operation is per-

formed for about 2 seconds.

"MP3/JPEG Repeat play"

NNoottee

P.B.C. on mode of VCD, the Repeat play function does not

work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback functions

DVF-3070 (EN/E,X,Y)

Using Bookmarks

The bookmark feature lets you mark a point on the disc

that you can go to quickly. You can store up to 14 book-

marks.

Using IntroScan function

CD IntroScan playback

It is possible to play back approx. 10 seconds of the

beginning of each track.

Create the bookmark

1 During stop mode, press the TOP MENU key on

the remote.

1 During playback, press the RANDOM key on the

remote.

TOP MENU

Number of marks applied

the disk/total number (14

Bookmark No.

to be assigned

EXIT

2 .

1 . INTRO

Bookmark No./

Number of marks

applied for the disk

RANDOM

2 Press the "1" key on the remote to select INTRO,

then press the ENTER key.

÷ The first 10 seconds of each track play.

MARK

GO TO

TOTAL

00 / 14

÷ After Intro Scan goes through all of the tracks, it stops.

÷ When the ENTER key or the TOP MENU key is

pressed during introScan of a track, the unit will return

to normal playback starting with that track.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select desired bookmark number.

IntroScan ends when 2 (EXIT) is selected.

3 When you reach the scene you want to mark,

press ENTER key.

VCD IntroScan playback

The VCD IntroScan function has three modes.

ENTER

1. INTRO : Thefirstapprox.8secondsofeachtrackwill

be played one after another .

MARK

GO TO

TOTAL

01 / 14

2. DISC : The beginning of each of the first nine

tracks of the disc will be played back se-

quentially and displayed on the screen.

When SKIP key is pressed, the next nine

screenswillbeplayedbackanddisplayed.

3. TRACK: The selected track will be played back

with the screen display divided into

nine parts.

÷ Up to 14 bookmarks can be applied in the same way for

one disc.

÷ When the ENTER key is pressed at a previously marked

bookmark, that mark will be changed to the new point.

Recalling a bookmarked scene

1 During playback, press the RANDOM key on the

remote.

1 During stop mode, press the TOP MENU key on

the remote.

TOP MENU

RANDOM

1 . INTRO

2 . DISC

3 . TRACK

4 . EXIT

2 Press the Cursor right (3) key on the remote to

recalling a bookmark number.

Set the cursor to this position.

2 Select 1 (INTRO), 2 (DISC), or 3 (TRACK) with the

numeric keys of the remote control and press

the ENTER key.

MARK

GO TO

TOTAL

03 / 14

At the time of "DISC" or

"TRACK" , the screen

willbedisplayeddivided

into nine pictures.

3 Press the Cursor up/down (5/∞) key on the re-

mote to select the bookmark number you want

to activate, then press ENTER key.

Thenextninepictures(ninetracks)willbedisplayedwhen

the skip up (¢) key is pressed.

NNootteess

When the number of one of the pictures is selected with

the numeric keys, playback will start from that picture.

÷ If all 14 bookmarks are in use, you can still mark new scenes,

but the previous bookmarks will be erased.

÷ Depending on the disc, the Bookmark function may not

work.

P.B.C. on mode of VCD, the IntroScan function does not work.

P.B.C. on mode of VCD, the Bookmark function does not

work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

Program play

DVF-3070 (EN/E,X,Y)

You can listen to the desired tracks of the current CD or VCD in any desired order.

Program Edit

1 During stop mode, press the P.MODE key on

Program edit screen appears.

the remote.

Track No.

P.MODE

TRACK

PROGRAM LIST

ADD

DELETE

PLAY

2 Select specific track by Press Cursor up/down

[12]

(5/∞) keys.

CLEAR

MULTI CONTROL

SET TRACK VALUE

Program list

3 Select "ADD" icon on the screen to register

selected value onto PROGRAM LIST, then

press the ENTER key.

Number of tracks

recorded on the disc.

NNoottee

"ADD" icon

: Add value onto "PROGRAM LIST"

MULTI CONTROL

Operations

"DELETE" icon: Delete value from "PROGRAM LIST"

"INSERT" icon : Insert value in "PROGRAM LIST"

"PLAY" icon : Play program play

"CLEAR" icon : When this icon is selected and the ENTER

key is pressed, the entire contents of the

PROGRAM LIST will be deleted, and the

Program edit screen also will disappear.

ENTER

4 You can select maximum 21 values by repeating

step 2 - 3.

÷ MP3/JPEG discs can not be programmed with this program

mode. (MP3/JPEG program playback w)

5 Select "PLAY" icon on the screen. then press

÷ The unit stops when the STOP (7) key is pressed. To restart

program play, press the P.MODE key, display the program

screen, select the "PLAY" icon, and press the ENTER key.

the ENTER key to start program play.

Lit

Display

To repeat program play

During program playback, press the REPEAT

key on the remote.

REPEAT

Each press the key switches the mode.

1 "REPEAT ONE"

2 "REPEAT ALL"

3 "REPEAT OFF"

Download from Www.Somanuals.com. All Manuals Search And Download.

Program play

DVF-3070 (EN/E,X,Y)

Insert track

During stop mode, press the P.MODE key on the remote

Program edit screen appears.

1 Select specific track to insert by press Cursor

TRACK

up/down (5/∞) keys.

PROGRAM LIST

ADD

DELETE

PLAY

MULTI CONTROL

[12]

CLEAR

2 Move the cursor with the Cursor right (3) key to

the "PROGRAM LIST" and select the column to

be added with the Cursor up/down (5/∞) keys.

(The color of the column where the Cursor is lo-

cated will change.)

TRACK

PROGRAM LIST

INSERT

DELETE

PLAY

[12]

MULTI CONTROL

CLEAR

3 Press the Cursor left (2) key, use the Cursor up/

down (5/∞) keys to move the Cursor to the "IN-

SERT" icon, and press the ENTER key.

TRACK

PROGRAM LIST

INSERT

DELETE

PLAY

[12]

ENTER

MULTI CONTROL

CLEAR

The new track will be inserted after (below) the

selected column.

Delete Program

During stop mode, press the P.MODE key on the remote

1 Move the cursor with the Cursor right (3) key to

the "PROGRAM LIST" and select the column to be

deleted with the Cursor up/down (5/∞) keys.

(The color of the column where the Cursor is lo-

cated will change.)

TRACK

PROGRAM LIST

INSERT

DELETE

PLAY

[12]

CLEAR

MULTI CONTROL

2 Press the Cursor left (2) key, use the Cursor up/

down (5/∞) keys to move the Cursor to the "DE-

LETE" icon, and press the ENTER key.

MULTI CONTROL

Release Program play

In following case, Program play would be released.

1. When you open and close tray.

ENTER

2. When you turn power off and on.

3. Press theCLEAR key during display of the Pro-

gram edit screen.

Selected value deletes

P.B.C. on mode of VCD, the Progam play function

NNoottee

does not work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

DVF-3070 (EN/E,X,Y)

Operations

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu playback

Set Up functions

DVF-3070 (EN/E,X,Y)

Hierarchical structure of VCD menus

When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more

details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that

the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selec-

tions on the menu screens.

Example for a hierarchical structure

First level (menu)

Second level (submenu)

Third level (scenes)

Advancing

Returning

When an item is selected on the menu screen with the

ENTER(Select)keyorthenumerickeys, advanceismadeto

the next lower menu level. When the advance destination

is the "scene" to be played, the contents will be played.

Each time the RETURN key is pressed, return is made to the

next higher menu.

÷ When several menus (scenes) can be selected in each

level, screen switching is possible with the keys ¢

(NEXT) and 4(PREV.).

Examples of operation keys and indications used during VCD playback

3 (Select)

Soft jacket indication

KENWOOD operation key

RETURN

ENTER

÷ Depending on the software, the jacket indication may differ from the above.

Download from Www.Somanuals.com. All Manuals Search And Download.

SMeteUnpufpulnacytbiaocnks

DVF-3070 (EN/E,X,Y)

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off)

÷ For the track numbers, refer to the disc jacket or other material.

÷ P.B.C. off mode : Without using menu playback function.

During VCD playback or stop mode, press the –

ON/OFF key on the remote control unit.

P.B.C. off mode

Goes off

To return to menu playback

ON/OFF

Press the –ON/OFF key again.

P.B.C. on mode

Lit

Playback will stop when P.B.C. is switched on

or off during playback.

NNoottee

Operations

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEG media playback

Set Up functions

DVF-3070 (EN/E,X,Y)

Guidance of MP3/JPEG

MP3/JPEG media that can be played back with this equipment

Usable media : CD-ROM, CD-R, CD-RW

Usable formats : ISO9660 level 1 (excluding expanded formats)

Files that can be played back : MP3 files and JPEG files

Creating media for playing back on this equipment

Compressing MP3

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow.

MP3 Files : 128kbps recommended (32kbps-320kbps)

÷ This unit is compatible with 32 kHz, 44.1 kHz(recommended) and 48 kHz sampling frequencies.

÷ This unit is compatible with ID3-TAG Ver. 1.

÷ DIGITAL output of MP3 data is done not as MP3 data, but as PCM data.

Naming folders and files

Single-byte characters between A and Z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be displayed.

Ensure that the "mp3" (MP3 files) or "jpg" (JPEG files) extension log is attached to all file names

÷ Never add the "mp3" extension log to any files other than MP3 files. If the "mp3" extension log is added to any files other

than MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers,

resulting in damage of adverse effects.

÷ Never add the "jpg" extension log to any files other than JPEG files. If the "jpg" extension log is added to any files other

than JPEG, the unit will not operate normally.

Confirming media and files

Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media.

Check to ensure that the saved file can be played back normally.

÷ It is not possible to confirm that files can be played back correctly while they are being saved onto the media.

When saving files onto media

Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session

has not be closed or finalized will not be played back correctly with this equipment.

÷ There are cases where the folder names and file names will not be displayed correctly depending on the software used to

save them.

÷ Do not store files or folders other than MP3 or JPEG on media to be played back with this equipment.

÷ It is recommended that ten or less sessions are stored when recording MP3 files onto a media.

÷ In case of a multisession disc, some time may be required until playback begins.

÷ There are cases where playback is not possible when MP3/JPEG files (CD-ROM) and music CD infomation (CD-DA) are

saved on the same media.

Example for a hierarchical structure

Example for the playback sequence

Playback is made in the order of 1 to - in the

following example.

Folder

File

NNoottee

Folder names and file names are displayed up to 8 characters. When folder names and file names are recorded with more than 8

characters, the names will be displayed in abbreviated form.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DVF-3070 (EN/E,X,Y)

Playing back MP3/JPEG files

÷ It is not possible to play back folders and files that ex-

ceed the maximum limitations of the media.

÷ A certain amount of time is required for the player to

confirm the media on which MP3/JPEG files have been

recorded before playback will commence.

This lights when an MP3 or

a JPEG disc is set.

Playback

1 During stop mode, press REPEAT key on the

÷ The SMART NAVI screen will be displayed when an

MP3 or JPEG disc is set.

remote to select play mode.

Each press switches the play mode.

1 FOLDER : Playback the folder that is selected.

2 DISC : Playback all files on the disc.

3 FOLDER REPEAT : Repeat the folder that is selected.

4 DISC REPEAT : Repeat all files on the disc.

5 REPEAT ONE : Repeat the file that is selected.

REPEAT

Play mode display

2 Press Cursor up/down (5/∞) keys on the re-

mote to select desired file, then press the EN-

TER key to start playback.

Root folder

Time display

FOLDER

PLAY

Operations

N AV I

0 0 : 0 3 : 2 8

ROOT

MP3_MUSIC_1

MULTI CONTROL

MP3_MUSIC_1

01 MY SONG 1

02 MY SONG 2

03 MY SONG 3

04 MY SONG 4

05 MY SONG 5

06 MY SONG 6

07 MY SONG 7

MP3_MUSIC_2

JPEG_TRAVEL_1

JPEG_TRAVEL_2

ENTER

÷ WhenJPEGfilesaredisplayed,thedisplayisswitched

automatically from one file to the next.

Theswitchingspeeddiffersaccordingtothefilesize.

Folders and files

in the root folder

Selected file

Program window

To stop playback press the 7(STOP) key.

Skipping files

Searching (only for MP3 files)

During playback, press the 4or ¢ key.

During playback, press the 1or ¡key.

MAIN UNIT

REMOTE

MAIN UNIT

REMOTE

÷ Each press switches the searching speed.

4: To skip backward

1 FF 2 X (¡ key) or FR 2 X (1key)

2 FF 4 X (¡ key) or FR 4 X (1key)

3 FF 6 X (¡ key) or FR 6 X (1key)

4 FF 8 X (¡ key) or FR 8 X (1key)

5 Normal playback

¢: To skip forward

When the play mode is "FOLDER", "FOLDER

REPEAT" or "REPEAT ONE", skipping to out-

side the folder being played is not possible.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DVF-3070 (EN/E,X,Y)

Selects the files to be played back directly

PLAY

N AV I

0 0 : 0 8 : 1 4

Press the numeric keys on the remote to enter

the desired file number or folder number.

MP3_MUSIC_3

FAVORITE 1

FAVORITE 2

FAVORITE 3

FAVORITE 4

FAVORITE 5

FAVORITE 6

FAVORITE 7

ENTER

File numbers and

folder numbers

NNoottee

(Example)

To select track No. 23 : 23

For selection of a number, refer to the file numbers on

the SMART NAVI screen.

The file numbers shown on the display of the main unit

differ from the file numbers entered directly with the

numeric keys, as the numbers for each folder are dis-

played.

÷ When a folder is selected, the contents of the

selected folder will be displayed.

÷ When a file is selected, playback of the selected

file will start.

Rotating a picture (JPEG files only)

It is possible to rotating a picture.

Switchingasshownbelowisdonewhenthecursorkeys

are pressed.

During JPEG file playback, press the Cursor (2/

3/5/∞) keys on the remote.

3key : 90° rotation in clockwise direction

2key : 90° rotation in counterclockwise direction

5key :Vertical mirror image

MULTI CONTROL

∞key : Horizontal mirror image

Display examples

Press 3key

Press 5key

ROTATING

Press 2key

Press ∞key

ROTATING

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DVF-3070 (EN/E,X,Y)

Preform operation in REPEAT mode always under observation of the

SMART NAVI screen.

MP3/JPEG Repeat play

Desired folders or discs can be played back repeatedly.

÷ "REPEAT ONE" : Repeat the file that is selected.

÷ "FOLDER REPEAT" : Repeat the folder that is selected.

÷ "DISC REPEAT" : Repeat the disc that is played.

Each press switches the play mode.

1 FOLDER : Playback the folder that is selected.

2 DISC : Playback all files on the disc.

1 During stop mode, press the REPEAT key on the

remote.

3 FOLDER REPEAT : Repeat the folder that is selected.

4 DISC REPEAT : Repeat all files on the disc.

5 REPEAT ONE : Repeat the file that is selected.

At the time of REPEAT mode

"REPEAT" is light.

REPEAT

Display

2 Press Cursor up/down (5/∞) keys on the re-

mote to select desired file, then press the EN-

TER key or the play/pause (6) key to start

playback.

DonotselectDISCREPEATwhenfilesotherthan

MP3 and JPEG have been recorded on the disc.

NNoottee

MP3/JPEG Random play

The files of a folder are played in random order.

÷ "RANDOM ON" : The fils of a folder being played will be se-

lected in random order for playback.

Operations

1 During stop mode, press the RANDOM key on

RANDOM ON

the remote.

N AV I

MP3_MUSIC_3

FAVORITE 1

FAVORITE 2

FAVORITE 3

FAVORITE 4

FAVORITE 5

FAVORITE 6

FAVORITE 7

AtthetimeofRANDOMmode

"RANDOM" is light.

RANDOM

Display

÷ In case ofRANDOM ON mode, playback will stop after

all files in the folder have been played back once.

Each time you press RANDOM key on the remote, ran-

dom play would be on and off.

2 Select a file in the folder to be played, press the

play/pause (6) key, and start random playback.

To cancel random play

To random repeat play

During stop mode, press the RANDOM key, then

press the REPEAT key on the remote.

1 Press the stop (7) key to stop playback.

÷ In case of RANDOM REP mode, all files in the folder

will be played back repeatedly. It is also possible that

the same file will be played back twice in a row.

2 Press the RANDOM key to cancel random play-

To cancel random repeat play

back.

RANDOM

Press the stop (7) key to stop random repeat play-

back, then press the REPEAT or RANDOM key.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 /JPEGSmeetdUipafpulnacytbiaocnks

DVF-3070 (EN/E,X,Y)

MP3 /JPEGprogram playback

You can listen to the desired files of the current MP3/JPEG disc in any desired order.

Program Edit

1 During stop mode, press the P.MODE key on the

remote.

P.MODE

2 Press Cursor up/down (5/∞) keys on the re-

Program window

mote to select the file, then press the ENTER

key.

PROG EDIT

N AV I

0 0 : 0 3 : 2 8

01 MY SONG 1

MULTI CONTROL

01 MY SONG 1 11

02 MY SONG 2 12

03 MY SONG 3 13

04 MY SONG 4 14

05 MY SONG 5 15

06 MY SONG 6 16

07 MY SONG 7 17

ENTER

÷ The selected file go to program window.

÷ You can select a maximum of about 100 files by re-

peating step 2. However, note that the maximum

number of programmable files depending on the num-

ber of files and folders in the MP3/JPEG disc and on

the total number of characters used in the file and

folder names.

3 Press the 7(Stop) key and confirm the pro-

PROG END display

gram.

0 0 : 0 8 : 1 4

PROG END

N AV I

01 MY SONG 1

06 MY SONG 6

03 MY SONG 3

FAVORITE 4

01 MY SONG 1 11

02 MY SONG 2 12

03 MY SONG 3 13

÷ Afterthe7(Stop)keyhasbeenpressedandthepro-

gram has been confirmed, the program no longer

can be changed.

0 0 : 0 8 : 1 4

PROG PLAY

MP3_MUSIC_1

N AV I

4 Press 6key to start program playback.

01 MY SONG 1

06 MY SONG 6

03 MY SONG 3

FAVORITE 4

÷ Confirm that the cursor is at the position of a "file" and

press the 6 key.

01 MY SONG 1 11

02 MY SONG 2 12

03 MY SONG 3 13

04 MY SONG 4 14

05 MY SONG 5 15

Playback is not possible when the cursor is at the posi-

tion of a "folder".

FAVORITE 8

05 MY SONG 5

Delete Program

Selected file

SELECT : 03

During program edit mode, press the Cursor up/

down keys in the program window, select the file to

be deleted, and press the CLEAR key.

PROG EDIT

N AV I

MP3_MUSIC_1

01 MY SONG 1

06 MY SONG 6

03 MY SONG 3

FAVORITE 4

01 MY SONG 1 11

02 MY SONG 2 12

03 MY SONG 3 13

04 MY SONG 4 14

05 MY SONG 5 15

06 MY SONG 6 16

07 MY SONG 7 17

FAVORITE 8

CLEAR

05 MY SONG 5

FAVORITE 1

÷ After the 7(Stop) key has been pressed and the pro-

gram has been confirmed, the program no longer can

be changed.

÷ AllprogramscanbecanceledbypressingtheP.MODE

key during stop in program mode. All programs also

can be canceled by opening the disc tray.

Program repeat play is not available with MP3 discs.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DVF-3070 (EN/E,X,Y)

Operations

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DVF-3070 (EN/E,T,X,Y)

What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the

table below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

1 Press the MENU key on the remote to enter SETUP

The microprocessor may fall into malfunction (impos-

sibility to operate erroneous display, etc.) when the

power cord is unplugged while power is ON or due to

an external factor.

MENU.

2 Select the PREFERENCE, then press the ENTER key.

3 Select DEFAULTS, press the Cursoe right (3) key to

select RESET.

4 Press the numeric keys as shown below.

Press 1, 3, 9, 7, then press the ENTER key.

In this case, switch off the power, wait for several sec-

onds, and then switch the power on again.

Returntothefactorydefaultsbyresettingthemicropro-

cessor is done as shown as follows.

When resetting is done according to this method, all set-

tings, including the settings for password and parental level,

will be reset to the factory defaults.

DVD player unit

Symptom

Cause

Remedy

There is no disc in the player.

There are no signals recorded on the side of

the disc being played.

Load a disc and press the 6key.

Turn the disc over and properly place it on

the disc tray.

Playback does not start when the 6key is

pressed.

The TV is not turned on.

The connection cords are not properly con-

nected.

Turn on the TV.

Properly reconnect the connection cords.

Playback starts but no image/sound is seen

heard.

The picture is slightly disrupted during fast

forward and fast reverse operations.

This is not a malfunction.

The picture is disrupted when the image is

fast forwarded or fast reversed.

The audio output cords are not properly con-

nected.

The volume control of the TV or amplifier is

not adjusted properly.

Properly connect the audio cords.

Set the sound volume to an appropriate

level.

Press the 6 key to resume normal play-

back mode.

No sound is heard.

The player is in a special playback mode.

A nearby device is generating noise.

The disc is dirty.

Separate this unit as far as possible from

the device you think is generating the

noise.

Refer to the "Disc handling precautions"

section and wipe dirt from the disc. 9

Use a new disc.

The picture does not look good or the pic-

ture/sound quality is poor.

The disc is damaged.

There is condensation on the optical lens.

Refer to the "Caution on condensation" sec-

tion and evaporate the condensation.

Time is required for the unit to detect the

disc type and size and for the rotation of the

motor to stabilize. This is not a malfunction.

Approximately 10 to 20 seconds are re-

quired for a disc to start playing, although

the time differs depending on the disc.

It takes a while for the disc to start playing.

The tray opens automatically.

The disc is not placed horizontally.

Properly place the disc on the tray.

The video format of the disc being played

does not match that of the connected TV

monitor.

Refer to the "Video formats" section ,and

use a disc with the appropriate video for-

mat for your TV or a TV with the appropriate

The top and bottom of the screen cannot be

seen, or the screen becomes black-and-

white.

video format for the disc.

The DVD disc being played does not contain

the recording of subtitles.

The subtitle cannot be displayed when the

DVD disc being played does not contain

the recording of subtitles.

The subtitle is not displayed.

The subtitle mode is set to off.

Press the SUBTITLE ON/OFF key to

switch on the subtitle mode.

The DVD disc being played does not contain

the recording of more than one audio (or sub-

title) language.

The voice (or subtitle) language cannot be

changed when the DVD disc being played

does not contain the recording of more

than one voice (or subtitle) language.

The voice (or subtitle) language cannot be

changed.

The DVD disc being played does not contain

the recording of more than one angle.

The viewing angle cannot be changed

when the DVD disc being played does not

contain the recording of more than one

angle.

More than one viewing angle may be re-

corded only in limited sections in a disc.

The viewing angle cannot be changed.

You are attempting to switch the angle in a

DVD section where more than one angle is

not recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DVF-3070 (EN/E,T,X,Y)

DVD player unit

Symptom

Cause

Remedy

A viewing restriction (PARENTAL) has been

set for the disc.

Check the viewing restriction level (PA-

RENTAL) setting.

Playback will not start even after a title is se-

lected.

You have forgotten the password.

Set the initial setup to the factory setup

with the following procedure.

The parental level cannot be changed.

1 Press the MENU key on the remote to

enter SETUP MENU.

2 Select the PREFERENCE, then press

the ENTER key.

3 Select DEFAULTS, press the Cursor

right (3) key to select RESET.

4 Press the numeric keys as shown below.

Press 1, 3, 9, 7, then press

the ENTER key.

The password set at the time of shipping

from the factory is "0000".

The DVD disc being played does not contain

the recording of the selected voice or subtitle

language.

Use a DVD disc containing the recording of

the selected voice or subtitle language.

Thevoiceorsubtitlelanguageselectedinthe

initial setting is not played.

The initial playback language is specified by

the DVD disc.

The DVD specifications provide for selection

at the menu screen.

Press SUBTITLE or the AUDIO key on the

remote and select the language.

Select at the menu screen of the disc.

The menu language function (MENU) is not

set to desired language.

Select disc menu language.

™

Menu screen messages are not shown in the

desired language.

A VCD cannot be played using menus.

The VCD disc being played is not compatible

Menu playback is available only with VCD

with P.B.C.

discs recorded with P.B.C.

"THE PLAYER IS LOCKED" will be displayed

on the TV screen (the mark on the display

ofthemainunitwillbelit),anddisktrayopen-

ing/closing operation will not be accepted.

Press the MENU key of the remote control

for several seconds while holding the stop

(7) key on the main unit pressed.

Operation is prohibited.

"THE PLAYER IS UNLOCKED" will be dis-

played (the

mark will not be lit, and op-

eration will become possible.

Remote control unit

Symptom

Cause

Remedy

Remote control operation is not possible.

Batteries are exhausted.

Replace with new batteries.

Operate the unit inside the remote control-

lable range.

The remote control is too far away from the

system, the controlling angle is deviated or

there is an obstacle in between.

Knowledge

Inhibition icon

Symptom

Cause

Remedy

Playback is restricted intentionally by the

software producer.

The operation is inhibited. Please try an-

other operation.

The inhibition icon is displayed

and remote control is not pos-

sible.

Manufactured under license from Dolby Laboratories.

"Dolby"andthedouble-DsymbolaretrademarksofDolby

Laboratories.

"DTS"and"DTSDigitalOut"aretrade-

marksofDigitalTheaterSystems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DVF-3070 (EN/E,T,X,Y)

[Type]

[Video Section]

System ................................................... DVD video player

Signal read system ......................... Semiconductor laser

Wave length................................ For DVD; 640 to 660 nm

For CD; 770 to 810 nm

Video output format ......................................... NTSC/PAL

Video compression

DVD ................................................................... MPEG-2

Composite video output level

Power class ..................................................... Class 2 (IEC)

......................... 1 Vp-p (75 Ω load, sync. negative)

S-video output level

[D/A Conversion Section]

(Y-signal) .............. 1 Vp-p (75 Ω load, sync. negative)

(C-signal)

D/A conversion ........................................................ 24 Bit

Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz)

......................... 4 fs (Sampling frequency; 96 kHz)

NTSC ........................................... 0.286 Vp-p (75 Ω)

PAL .............................................. 0.300 Vp-p (75 Ω)

Component Video output level (For U.S. Military)

(Y-signal) ................................................. 1 Vp-p (75 Ω)

(Cb-signal) ........................................ 0.648 Vp-p (75 Ω)

(Cr-signal) ......................................... 0.648 Vp-p (75 Ω)

RGB output level (SCART) (For Europe) .... 0.7 Vp-p (75 Ω)

Horizontal resolution........................ More than 480 lines

Video signal to noise ratio .................... More than 70 dB

[Audio section]

Frequency response

Sampling frequency ; 44.1 kHz ............ 4 Hz ~ 20 kHz

Sampling frequency ; 48 kHz ............... 4 Hz ~ 22 kHz

Sampling frequency ; 96 kHz ............... 4 Hz ~ 38 kHz

Signal to noise ratio .............................. More than 98 dB

Dynamic range ....................................... More than 92 dB

Total harmonic distortion ...... Less than 0.005 % (1 kHz)

Channel separation ................... More than 95 dB (1 kHz)

Wow and flutter ........................ Below measurable limit

Analog output level/impedance .................... 2 V / 570 Ω

Digital output level/impedance

[General]

Power consumption .................................................. 12 W

Dimensions .................................. W : 440 mm (17-5/16”)

....................................................... H : 75 mm (2-15/16”)

....................................................... D : 282 mm (11-1/8”)

Weight (net) ................................................. 3.1 kg (6.8 lb)

COAXIAL.............................................. 0.5 Vp-p / 75 Ω

OPTICAL ..... -21 dBm ~ -15 dBm (Wave length 660 nm)

KENWOODfollowsapolicyofcontinuousadvancementsindevelopment.Forthisreasonspecificationsmay

be changed without notice.

NNootteess

÷ Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).

Download from Www.Somanuals.com. All Manuals Search And Download.

DVF-3070 (EN/E,T,X,Y)

Knowledge

Download from Www.Somanuals.com. All Manuals Search And Download.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below. Refer

to the model and serial numbers whenever you call upon your dealer for

information or service on this product.

Model

Serial Number

Download from Www.Somanuals.com. All Manuals Search And Download.

Jensen Cassette Player CR560X User Manual
JVC Electric Heater AV 48P787 User Manual
JVC Home Theater System TH M508 User Manual
JVC Stereo Receiver KS F185 User Manual
JVC VCR HR A57U User Manual
Kambrook Vacuum Cleaner KVC12 User Manual
King Kutter Lawn Mower Free Floating User Manual
KitchenAid Oven KEBC147VBL00 User Manual
KitchenAid Refrigerator W10162435A User Manual
Klipsch Speaker System 20M0499 User Manual