CD PLAYER
DP-R7090
DP-R6090
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used for two models.
Model availability and features (functions) may differ
depending on the country and sales area.
COMPACT
DIGITAL AUDIO
B60-3245-00 MA ( T, M )
ID
98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
3
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped
to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier
for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Special features
CD-TEXT support
¶ The text information (disc title, track titles, names of the artists, songwriters, composers,
etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some
Japanese words and text may not be displayed.)
@#
Advanced technologies incorporated in pursuit
of improved sound quality and stability
¶ D.R.I.V.E. (Dynamic Resolution Intensive Vector Enhancement) IC is built in for drastic re-
duction of distortion at small signal level.
¶ High-performance new D/A converter achieving a 24-bit resolution. (DP-R7090 only)
Convenient features for dubbing CD onto tape
¶ Edit function for rearranging tracks according to the tape length so that no music is inter-
rupted in the middle.
*
%
¶ Auto space function.
Easy operation functions
¶ Easy operation functions allow systematic operation with other KENWOOD components
connected through the system control connection.
6
Accessories
AC plug adaptor .............. (1)
Audio cord ........................ (1)
System control cord ............ (1)
Use to adapt the plug on the power cord
to the shape of the wall outlet.
(Accessory only for regions where use is
necessary.)
Remote control unit ......... (1)
Batteries (R6/AA) .............. (2)
Contents
Caution: Read the pages marked
carefully to ensure safe operation.
Introduction.................................................................. 2
Searching for tracks by title (TITLE SEARCH) ......... 12
Displays ...................................................................... 13
Programmed play (PGM mode)................................ 14
To check or change the programmed tracks .................. 15
To add a track to the program ......................................... 15
To clear tracks from the program .................................... 15
Repeated playback .................................................... 16
To repeat only the programmed tracks........................... 16
To repeat the entire disc ................................................... 17
Editing......................................................................... 18
To check the edited contents ........................................... 19
Playing or recording the edited contents ....................... 19
To clear the edited contents ............................................. 19
Playback in random order (Random playback) ....... 20
Timer operations........................................................ 21
Maintenance............................................................... 22
In case of difficulty..................................................... 23
Specifications ............................................................. 24
Before applying power ................................................ 2
Safety precautions....................................................... 2
Special features ................................................................... 3
System connections .................................................... 4
Connection to a general-use amplifier .............................. 5
Connection to digital amplifier or MD ............................... 5
Adjusting the output levels of the output jacks and
headphone output ............................................................... 5
To use the headphone......................................................... 5
Controls and indicators ............................................... 7
Operation of remote control unit ............................... 8
Preparing to play tracks .............................................. 9
Normal play (TRACK mode)...................................... 10
Playing tracks in order from track No.1 .......................... 10
Playback from desired track ............................................. 11
Skipping tracks .................................................................. 11
Searching ........................................................................... 11
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
DP-R7090/R6090 (En)
Malfunction of microcomputer
Caution:
4
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
Do not plug in the power lead until all connections are com-
pleted.
£
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer
dimensions including projections) equal to, or greater than, shown below.
Left and right panels: 10 cm
Rear panel: 10 cm
75Ω coaxial cable with RCA PIN.
(Commercially-available)
Commercially-available
optical fiber cable
Digital component (MD, DAT, etc.)
(COAXIAL)
SL 16/XS8 switch 6
DIGITAL INPUT
(OPTICAL)
LINE OUTPUT
VARIABLE
SYSTEƒM CONTROL
DIGITAL OUTPUT
COAXIAL
OPTICAL
L
SL16 XS 8
R
TEXT
Remove the protection cap when using
the DIGITAL OUTPUT (OPTICAL) jack.
Commercially-available
optical fiber cable
To AC outlet
SYSTEM
CONTROL
DIGITAL
INPUT
OPTICAL
Digital amplifier
(or ordinary amplifier,
receiver, etc.)
System control cord
CD
L
Audio cord
R
To wall AC outlet
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
5
Connection to a general-use amplifier
Use the provided audio cords to connect the OUTPUT jacks of this
unit to the CD input jacks (or AUX jacks) of the amplifier.
Connection to digital amplifier or MD
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the
digital input jack of the amplifier, DAT recorder, MD recorder, etc.,
using an optical fiber cable or coaxial cable which are commercially
available in audio stores.
÷When using an optical fiber cable to connect this unit to a digital
amplifier, insert the plug straight into the jack until a snap sound is
heard.
Optical fiber cable
÷Be careful not to bend, coil, or bundle the optical fiber cable.
÷Optical fiber cables available on the market may not always be able to
be used with this player. If your cord cannot be used with this unit,
consult the store from which you purchased the cord or your nearest
dealer.
Adjusting the output levels of the output jacks
and headphone output
The OUTPUT level (UP/DOWN) keys of the remote control unit can
adjust the output levels from the LINE/OUT and PHONES jacks of
the unit.
To use the headphone
Connect a stereo headphone to the PHONES jack of the CD player.
Adjust the sound volume using the remote control unit.
Output level
OUTPUT -12dB
OUTPUT
DOWN
UP
÷Itisnotfavorableforthesoundqualitytodecreasetheoutputlevelfrom
this unit too much. Use these keys for coordination with other line
levels.
÷Adjusting the headphone output level also changes the LINE/OUT
level. Do not adjust the output level from this unit particularly during
recording.
÷Please note that the sound output is at the maximum level when the
power is turned on.
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
6
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
Amplifier or receiver
SYSTEM
CONTROL
There are two KENWOOD system control modes. Make connec-
tions according to the groups of terminal symbols shown below.
[XS8] Mode
[SL16] Mode
:
:
lets you combine F, f, and ƒ terminals
for terminals only
This unit
SYSTEM
CONTROL
This unit is compatible with both [XS8] and [SL16] modes.
Select the mode according to the connected components. 4
j
Cassette deck
SYSTEM
CONTROL
SL16 XS 8
÷Do this operation after completing all connections.
(Ensure that the unit is set to STANDBY mode.)
NNootteess
1. If your amplifier or receiver does not have a system control terminal,
do not connect any system control cords to the system control ter-
minals on the other components.
2. Do not connect system control cords to any components other than
those specified by KENWOOD. It may cause a malfunction and dam-
age your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote contrl unit supplied with the amplifier or receiver.
Automatic Operation (Except [XR] equipment)
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording (Except [XR] equipment)
Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordings
from CD.
See the operating instructions supplied with your cassette deck for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
DP-R7090/R6090 (En)
7
Play indicator
(The displays given in this manual are approximations only.
Theymaydifferfromwhatactuallyappearsonthedisplay.)
Text information display
••• •• •• •••• •• ••
Pause indicator
DISPLAY
1
2 3 4 5
6
7
8
9 0
TEXT DISP. ALL INFO.
P.MODE TIME DISP.
RANDOM REPEAT
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
4
1
¢
¡
EDIT
DISC SKIP
0
-ON –STANDBY
7
6
COMPACT
PHONES
DIGITAL AUDIO
TEXT
! @
#
$
% ^ &
*
Thekeyswiththesamenameasthoseontheremotecontrol
unit operate the same way as the remote control unit.
0 Open/Close key (0)
Opens and closes the disc tray.
!RANDOM key
Press to play the tracks in a random order.
@REPEAT key
Press to play the tracks repeatedly.
#TIME DISP. key
Press to switch the time indication mode.
$Disc tray
Load the disc to be played back.
%EDIT mode key
Press to select the edit mode.
^STOP key (7)
9
)
^
#
9
*
0
5
0
1ON/STANDBY (
Turns the unit ON/STANDBY.
2P.MODE key
) switch
9
$
#
#
8
!
!
0
9
3TEXT DISP. key
Used to select the CD-TEXT information display.
4ALL INFO. key
5Remote control light sensor
6Search keys (1,¡)
Fast forwards or fast reverses the track.
7Skip keys (4,¢)
Press to skip to the beginning of another track.
8Disc selector keys (DISC1 – DISC5)
Press to select the disc to be played.
9DISC SKIP key
&PHONES jack
Use to connect (optional) headphones.
*PLAY/PAUSE key (6)
Each time the key is pressed, playback and pause switch
each other.
Press to rotate the disc tray or to select the disc.
About the STANDBY mode
When the power cord of this unit is plugged into an AC outlet, a small amount of current is being supplied to the unit even when the ON/STANDBY
switch is not depressed (–). This is called the STANDBY mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of remote control unit
DP-R7090/R6090 (En)
The keys with the same name as those on the main unit operate the same way as the main unit.
The keys marked * are provided only on the remote control unit.
8
1 Program-related and other keys
RANDOM key
*3OUTPUT (DOWN, UP) key
5
)
^
$
#
*
DISC SELECTOR
2
RANDOM
REPEAT
P.MODE
1
4
3
4
5
REPEAT key
4DISC SELECTOR keys
0
90
P.MODE key
5DISC SKIP key
5
2
DISC SKIP
3
TIME DISPLAY key
EDIT key
1
1
*6Numeric keys ( 1 ~ 0 , +10
)
!
* CHECK key
* CLEAR key
%(
%(
TIME
DISPLAY
4
7
5
8
6
9
7 Basic function keys
Stop key (7)
6
7
EDIT
0
0
!
!
TEXT
DISPLAY
2 Selector keys relating to text informa-
Play/Pause key (6)
Skip (4,¢) keys
Search keys (1,¡)
CHECK
0
+10
6
tion
2
3
CLEAR ALL INFO.
7
* ALL TEXT SEARCH key
TEXT DISPLAY key
ALL INFO. key
9
#
#
@
ALL TEXT
SEARCH SEARCH
TITLE
4
1
¢
¡
OUTPUT
DOWN
UP
* TITLE SEARCH key
REMOTE CONTROL UNIT
RC-P0601
Model: RC-P0601
Infrared ray system
Loading batteries
1 Remove the cover.
2 Insert batteries.
3 Close the cover.
2
2
1
1
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
Operation
Remote control
light sensor
After plugging in the power cord, press the ON/STANDBY
(
) switch of the main unit to turn the unit ON. When the
6m
unit is turned ON, press the key of the function to be
operated.
30
30
Operating range
(Approx.)
÷When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
REMOTE CONTROL UNIT
RC-P0601
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case, change the system installation position to prevent the malfunction.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing to Play Tracks
DP-R7090/R6090 (En)
• Turn the unit ON.
Preparation
9
-ON –STANDBY
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
Loading/unloading discs
1Load/unload a disc.
Open the tray.
1
0
÷Do not touch the played side of disc.
Place/remove a disc.
2
÷Loading two discs together will cause malfunctioning.
÷Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
Label side
÷A single CD (8 cm disc) can also be played.
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
Disc tray
When loading or unloading other discs
3
÷When loading/unloading a disc while the tray rotates, a malfunction
might occur. Load/unload the disc when the tray does not rotate.
DISC SKIP
2Close the tray.
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
0
All DISC indicators " " light regardless of how many discs are
present.
Remote control unit only
ALL TEXT SEARCH
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.
Search in progress or reading information
After loading all the discs, operate in stop mode.
Blinks.
DISC READING
«
ALL TEXT
SEARCH
RE
RC-P
D1 : CD TEXT
When the disc is CD-TEXT
÷The information read into the CD player is cleared
÷Repeat the above procedure so that the complete disc information is
when the tray is opened. Therefore, perform this
read into the CD player.
operation again if the tray was opened.
÷In the case of a non-CD-TEXT disc, the ”D1 : NO CD TEXT“ display will
appear for approx. 3 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal play (TRACK mode)
UsethefollowingproceduretoplayaCDintheoriginalorder
of tracks from track No. 1.
DP-R7090/R6090 (En)
10
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
Playing tracks in order from track No. 1
Check that the unit is in the normal play TRACK
1
mode.
!
2Start playback.
If there is no disc in the selected disc tray, the
corresponding indicator " " goes off.
Select the disc.
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
Blinks during playback.
÷Playback starts from the disc selected in order of the DISC No.
÷When the 3/8key is pressed without selecting a disc, playback starts
from the indicated DISC No.
DISC SKIP
Lights up.
01
Track NO. being played
1:23
Elapsed time of track being played
÷In the case of a CD-TEXT disc, the disc’s title is scrolled on the display.
WhatisthendisplayedisinaccordancewiththeTEXTDISPLAYmode.
#
To pause playback
To stop playback
6
7
01
Lights up.
÷Each press pauses and plays the CD alternately.
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
11
Playback from desired track
1 Select the disc.
DISC SELECTOR
1
4
2
3
REMOTE CONTROL UNIT
RC-P0601
5
2 Select the desired track No.
Press the numeric keys as shown below....
1
2
3
To enter track No. 23 : 003
To enter track No. 40 : 0000)
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0601
÷Playback starts from the selected track and continues on the subse-
quent tracks.
+10
Skipping tracks
4
¢
To skip
backward
To skip
forward
÷The track in the direction of the pressed key is skipped, and the selected
track will be played from the beginning.
REMOTE CONTROL UN
RC-P0601
÷When the 4 key is pressed once during playback, the track being
played will be played from the beginning.
Searching
1
¡
Backward
search
Forward
search
÷Playback starts from the position where the key is released.
REMOTE CON
RC-P060
What is the “normal play TRACK mode”?
The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off.
To set the unit to the TRACK mode:
Press the P.MODE key when the ”PGM“ or ”EDIT“ display is lighted.
Press the RANDOM key when the ”RNDM“ display is lighted.
Goes off.
Goes off.
Goes off.
P.MODE
RANDOM
PGM01 EDIT RNDM
REMOTE CONTROL UNIT
RC-P0601
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for tracks by title (TITLE SEARCH)
In the case of a CD-TEXT disc, the tracks to be heard can be
searched by title.
DP-R7090/R6090 (En)
12
÷Load a disc (CD-TEXT support) in the CD
player.
Preparation
÷Check that the unit is in the normal play
TRACK mode.
!
÷Press the ALL TEXT SEARCH key. 9
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
1Press the TITLE SEARCH key.
Blinks.
TITLE
SEARCH
D1 01 TITLE ABC
Track title
REMOTE C
RC-0601
÷When no CD-TEXT discs are loaded, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
To stop the search, press
the TITLE SEARCH key again.
2Select the name of the track (title) to be heard.
4
¢
D1 02 TITLE XYZ
REMOTE CONTROL UNIT
RC-P0601
If no keys are operated for more than a second, the track title is scrolled on
the display.
The track number
skips backward.
The track number
skips forward.
3Start playback.
TITLE XYZ
➡
6
The letters move toward the left.
REMOTE CONTROL UNIT
RC-P0601
02
Track NO. being played
1:23
Elapsed time of track being played
÷What is displayed will differ depending on the item which has been
selected by TEXT DISPLAY.
#
Display scrolling
Some track titles contain so much text information that
the full titles will not fit on the display. In cases like this,
the letters on the display move from right to left so that the
non-visible part of the title is revealed. This type of display
movement is known as “scrolling display.”
Display example
0 1 C A B C D E F G H I J K L M N O P Q ...
➡
Scroll display
0 1 L M N O P Q ...
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays
DP-R7090/R6090 (En)
Time display on CD player (TIME DISPLAY)
13
Each press of the TIME DISPLAY key changes the displayed contents.
1
: Elapsed time of track being played
: Remaining time of track being played
1 :23
-2 :37
Do this operation in the play mode.
2
TIME
DISPLAY
3
: Elapsed time of entire disc
(T lights up.)
23 :45T
-36 :25T
REMOTE CONTROL UNIT
RC-P0601
4
: Remaining time on entire disc (T lights up.)
÷Only the display 1 and 2 will be displayed in PGM, RANDOM and
EDIT modes.
Selecting the text information display (TEXT DISPLAY)
In the stop mode When the key is pressed once, the 1 “Disc
Title” is scrolled on the display; when it is
pressed repeatedly, the display is changed.
(This operation cannot be performed in the
PGM mode.)
In the case of a CD-TEXT disc, the displays shown below can
be selected.
1 Disc Title
2 Disc Artist : Singer (or performer)
: Disc title
TEXT
DISPLAY
3 TIME
: Disc No., track No., time display
REMOTE CONTROL UNIT
RC-P0601
÷If the key is released while 2 ”Disc Artist“ is displayed, 1 ”Disc
Title“ returns to the display.
In the play mode
When the key is pressed once, the 1 “Track
Title” is scrolled on the display; when it is
pressed repeatedly, the display is changed.
Disc Title : AB
➡
Scroll display
1 Track Title : Track title
2 Track Artist : Singer (or performer)
: ABCDEF...
3 Disc Title
4 Disc Artist : Singer (or performer)
5 TIME : Track No., time display
: Disc title
÷When there is no text information to be displayed “– – – – –” is
scrolled on the display.
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
÷If the key is released at any point while 2 ”Track Artist“ to 4 ”Disc
Artist“ is displayed, 1 ”Track Title“ returns to the display.
Displaying all the text information (ALL INFO.)
In the case of a CD-TEXT disc, the text information shown below is displayed automatically during normal play (TRACK mode).
Each item is displayed in turn each time the key is pressed.
When the key is repeatedly pressed while an item is being displayed,
the display is forcibly moved to the next item.
ALL INFO.
1 Disc/Track Title : Disc and track titles
REMOTE CONTROL UNIT
RC-P0601
2 Disc/Track Artist : Singer (or performer)
3 Disc/Track Songwriter : Songwriter
4 Disc/Track Composer : Composer
➡
Scroll display
5 Disc/Track Arranger
6 Disc/Track Message
: Arranger
: Message from sponsor or artist
Arranger : ABCD
7 ID INFO.
8 Genre INFO.
: Record company, release date, etc.
: Genre information
To skip to the next track while the items are being displayed:
Press the ¢key.
9 ALL INFO. END : (Release)
÷Items from 1 to 6 are displayed in the sequence of disc and track.
÷When there is no text information to be displayed “– – – – –” is scrolled
on the display.
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
÷The display can be returned to a previous item by pressing the 4
key.
÷ALL INFO. is released when any other key is pressed while items
are being displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
DP-R7090/R6090 (En)
14
÷Load a disc in the CD player.
Preparation
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
1 Press so that the “PGM” indicator lights.
Do this operation in the stop mode.
Blinks.
P.MODE
PGM01 DISC?
REMOTE CONTROL UNIT
RC-P0601
2Program desired tracks.
1Select the disc.
PGM01 D1 TNO.??
DISC SELECTOR
1
2
3
In the case of a CD-TEXT disc, the disc title is scrolled on the display.
4
5
REMOTE CONTROL UNIT
RC-P0601
Press the numeric keys as shown below....
Go to step 2 within 8 seconds.
To enter track No. 25 : 005
2Select the desired track No.
1
2
3
PGM01 D1 TNO.25
«
4
7
5
8
0
6
9
PGM01 ABCDEFGH
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
REMOTE CONTROL UNIT
RC-P0601
+10
Go to step 3 within 8 seconds.
PGM01 D1 TNO.25
3Set the entry.
P.MODE
÷Tracks can also be selected by pressing the 4 or ¢key.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
REMOTE CONTROL UNIT
RC-P0601
÷If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
4Repeat steps 1, 2and 3above.
3Start playback.
÷When the 4or ¢key is pressed during playback, the track will be
skipped in the direction of the pressed button.
6
÷When the 4key is pressed once during playback, the play position
returns to the beginning of the current track being played.
REMOTE CONTROL UNIT
RC-P0601
To stop playback
7
÷The programmed contents remain in memory.
REMOTE CONTROL UNIT
RC-P0601
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
To check or change the programmed tracks
15
Blinks.
1 Press the CHECK key.
Press until the track No. to
be changed is displayed.
CHECK
PGM01 D5 TNO.25
REMOTE CONTROL UNIT
RC-P0601
÷Perform only step 1 to simply check the program.
2Select the disc.
÷In the case of a CD-TEXT disc, the track's title is scrolled on the display.
÷Each time the key is pressed, the program No. and the track No. on CD
are displayed.
DISC SELECTOR
1
2
3
4
5
REMOTE CONTROL UNIT
RC-P0601
3Select the new track No.
Example
1
2
3
↓
÷Press it while the “PGM 01” indicator blinks.
÷The track being played cannot be changed.
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0601
+10
4Set the entry.
P.MODE
REMOTE CONTROL UNIT
RC-P0601
To add a track to the program
1 Select the disc.
DISC SELECTOR
1
4
2
3
5
REMOTE CONTROL UNIT
RC-P0601
2Select the desired track No.
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0601
÷When a track No. is selected, the track will be added to the end of the
existing program.
+10
3Press the P.MODE key.
To clear tracks from the program
Press to clear tracks from the end.
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played
cannot be cleared.
CLEAR
REMOTE CONTROL UNIT
RC-P0601
To clear all tracks.
P.MODE
÷Selected tracks can be also completely cleared just by operating the 0
key.
REMOTE CONTROL UNIT
RC-P0601
÷The entire program is cleared.
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
÷Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeated playback
DP-R7090/R6090 (En)
÷Load a disc in the CD player.
Preparation
16
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
To repeat only the programmed tracks
Press so that the “PGM” indicator
1
lights.
P.MODE
PGM01 DISC?
REMOTE CONTROL UNIT
RC-P0601
Select the disc.
2
DISC SELECTOR
1
2
3
4
5
REMOTE CONTROL UNIT
RC-P0601
Go to step 3within 8 seconds.
Select the desired track number.
÷All of the programmed tracks will be repeated.
3
÷In case only one track is programmed, only that track will be repeated.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0601
+10
Go to step 4within 8 seconds.
Set the entry.
4
P.MODE
REMOTE CONTROL UNIT
RC-P0601
Repeat steps
–
2 4
above.
5
6
Switch REPEAT ON.
REPEAT
REPEAT ON
REMOTE CONTROL UNIT
RC-P0601
The current status is displayed when the key is
pressed once.
When it is pressed while the status is displayed, the
repeat ON status can be set to OFF (or vice versa).
Start playback.
7
6
REMOTE CONTROL UNIT
RC-P0601
To cancel repeated playback
Press the REPEAT key twice.
(REPEAT ON → OFF)
REPEAT
REMOTE CONTROL UNIT
RC-P0601
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
17
To repeat the entire disc
This allows repeated playback of all the tracks on the disc
loaded in the disc tray.
Press so that the “PGM” indicator
1
goes off.
P.MODE
\
PGM01
01
REMOTE CONTROL UNIT
RC-P0601
Switch REPEAT ON.
2
REPEAT
The current status is displayed when the key
is pressed once.
When it is pressed while the status is dis-
played, the repeat ON status can be set to OFF
(or vice versa).
REMOTE CONTROL UNIT
RC-P0601
REPEAT ON
Start playback.
3
6
REMOTE CONTROL UNIT
RC-P0601
To cancel repeated playback
Press the REPEAT key twice.
(REPEAT ON → OFF)
REPEAT
REMOTE CONTROL UNIT
RC-P0601
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
DP-R7090/R6090 (En)
The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
middle at the ends of sides A and B.
18
÷Load a disc in the CD player.
Preparation
÷Check that the unit is in the normal play
TRACK mode.
!
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
1Light the “EDIT” indicator.
Do this operation in the stop mode.
Blinks.
EDIT
EDIT DISC?
REMOTE CONTROL UNIT
RC-P0601
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
2Select the disc.
DISC SELECTOR
2
1
4
3
5
REMOTE CONTROL UNIT
RC-P0601
Go to step 3 within 8 seconds.
3Enter the recording time of the tape.
Press the numeric keys as shown below.
30-minute tape : 000)
46-minute tape : 00006
When using the numeric keys:
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0601
EDIT DISC3 C-46
+10
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
When using the TIME DISPLAY key:
1 Select the time.
2 Set the entry.
÷By pressing the TIME DISPLAY key the set time-length intervals will
TIME
DISPLAY
EDIT
change in this order:
"46=54=60=74=90=??"
➡
REMOTE CONTROL UNIT
RC-P0601
÷The interval length can be adjusted with the skip keys 4and ¢in
units of one minute (to a maximum of 99 minutes).
÷Automatic editing is executed for side A and side B,
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-R7090/R6090 (En)
19
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
To check the edited contents
CHECK
EDIT A 01
REMOTE CONTROL UNIT
RC-P0601
÷When the CHECK key is pressed, track numbers and remaining time
in the file A are displayed first, then those in the file B.
Playing or recording the edited contents
Press the 6key to start playback according to the edited
content. The playback pauses at the beginning of the track
NNoottee
edited for tape side B. Press the 6key again to continue
playback.
6
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
REMOTE CONTROL UNIT
RC-P0601
÷Do not adjust the output level from this unit particularly during record-
ing.
÷For details, see the instruction manual of the cassette deck.
To clear the edited contents
Press any one of these keys.
P.MODE
CLEAR
REMOTE CONTROL UNIT
RC-P0601
0
÷The edited data is cleared entirely.
Do this operation in the stop mode.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
the last track on side A or side B may be cut short.
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback in a random order (Random playback)
DP-R7090/R6090 (En)
As tracks are selected at random, you can enjoy listening to
for a long time.
20
÷Load a disc in the CD player.
Preparation
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
Check that the unit is in the normal play TRACK
1
mode.
!
2Press the RANDOM key.
During track selection: ”>“ and ”<“ move from the outside to the inside.
<<<><E12 ><>>>
«
RANDOM
The number here changes.
REMOTE CONTROL UNIT
RC-P0601
RNDM005
In case track No. 5 is selected
÷Each time a track ends, the same operation as above is repeated, and
the track selected next is played.
÷Random play stops after all of the tunes have been played once.
÷The random playback can also be repeated by pressing the REPEAT
key.
To select another track in the middle of playing one
To cancel random playback
RANDOM
¢
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
÷Pressing the 4key once returns to the beginning of the track being
played.
÷Press the RANDOM key to start normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operations
Timer playback of CD can be started at any time using an
audio timer which is available in audio stores.
DP-R7090/R6090 (En)
This unit
21
System control cord
Audio cord
÷Connect the power cords of the associated
components so that their power can be turned
ON through the audio timer.
Preparation
(Also, be sure to read carefully the instruction
manual of the timer.)
Amplifier
12 : 00
To wall AC outlet
Audio timer
Turn the powers of the associated components
ON.
÷If the amplifier is not connected to the CD player through a system
control cord, select the "CD" input with the input selector.
1
2Preparation
Load a disc in the CD player.
9
Label side
3Set the amplifier volume.
Play the disc.
1
6
Adjusting the volume:
Set the volume the maximum (0 dB) using the OUTPUT (UP)
key on the remote control unit, and adjust the volume to the
desired level on the amplifier side.
(Since the sound output is at the maximum level when the power
is turned on, lowering the level with the remote control unit will
change the volume.)
Adjust the amplifier volume.
2
3
NNoottee
(Use the remote control unit of this unit
to adjust the volume to the maximum
level.)
Stop the disc.
7
4Set the timer ON time.
Set the timer so that it supplies
power at the specified time.
÷With some audio timer models, the power is automatically turned OFF
when the timer ON time is set. With such a model, skip step 5 below.
5Turn OFF the power output from the audio timer.
÷Do not touch the ON/STANDBY (
CD player.
) switches of the amplifier and
÷When the set time comes, the disc playback starts automatically.
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it.
2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
DP-R7090/R6090 (En)
22
Disc handling precautions
Cleaning
If fingerprints or foreign matter become
attached to the disc, lightly wipe the
disc with a soft cotton cloth (or similar)
from the center of the disc outwards,
in a radial manner.
Handling
Hold compact discs so that you do not
touch the playing surface.
Label side
÷Do not attach paper or tape to either
the playing side or the label side of
compact discs.
Playing side
Sticker
÷The paste left on the label surface after
a sticker has been peeled off is a factor
which may cause malfunction. If the
surfaceisstickyduetoremainingpaste,
be sure to clean it with alcohole before
use.
Storage
When a disc is not to be played for a
long period of time, remove it from the
CD player and store it in its case.
Sticky paste
Never play a cracked or warped disc.
Caution on disc used
During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed disc or a
disc repaired with tape or adhesive agent.
Do not use cleaning discs.
Please do not use commercially available cleaning discs, they may dam-
age the internal mechanism.
Discs which can be played with this unit
Cleaning
CD (12 cm, 8 cm) (CD-TEXT support), CDV (only the audio
part)
÷With CD-G (CD Graphics) discs, this unit can play only the audio.
Note related to transportation and movement
Do not use volatile solvents such as alcohol, paint thinner, gasoline,
or benzine, etc. to clean the cabinet. Use a clean dry cloth.
Before transporting or moving this unit, carry out the following
operations.
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic components.
1. Turn the unit ON but do not load a disc.
2. Wait a few seconds and verify that the display shown appears.
NO DISC
3. Press the 0 OPEN/CLOSE key to open the disc tray completely.
4. Press the 0 OPEN/CLOSE key again to close the tray.
5. Wait a few seconds and set the unit to STANDBY mode.
CD accessories
The CD accessories (stebilizer, protection sheet, protection ring, etc.)
which are marketed for improving the sound quality or protecting discs
as well as the disc cleaner should not be used with this system be-
cause they may cause malfunction.
Beware of condensation
Be especially careful in the following conditions:
÷When the unit is brought from a cold place to a warm place, and there
is a large temperature difference.
When water vapor comes into contact with the surface of cold mate-
rial, water drops are produced. If condensation occurs, correct opera-
tion may not be possible, or the unit may not function correctly.
This is not a malfunction, however, the unit should be dried.
÷When a heater starts operating.
÷When the unit is brought from an air - conditioned place to a place of
high temperature with high humidity.
To do this, turn the ON/STANDBY (
unit as it is for several hours.
) switch ON and leave the
÷When there is a large difference between the internal temperature of
the unit and the ambient temperature, or in conditions where
condensation occurs easily.
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
DP-R7090/R6090 (En)
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the
table below to see if the problem can be corrected before seeking help from your dealer or service representative.
23
Operation to reset
The microcomputer may fall into malfunction (impossibil-
Set the unit to STANDBY mode by pressing ON/
ity to operate, erroneous display, etc.) when the connec-
STANDBY (
theunitONbypressingtheON/STANDBY(
again.
) switch, and after a few seconds, turn
tion cords are unplugged while the unit is ON or due to an
external factor. In this case, execute the following method
to reset the microcomputer and return it to normal condi-
tion.
)switch
÷Please be aware that resetting the CD player will erase all
stored information and return it to the factory settings.
CD player unit
Symptom
Cause
Remedy
÷Insert the power plug firmly to the AC outlet.
÷Turn the amplifier’s power ON.
÷Power plug is loosely connected.
÷Withthepowerplugconnectedtotheswitched
AC outlet of an amplifier, the power of the
amplifier is turned off.
The unit is not turned ON with the ON/
STANDBY ( ) switch ON.
÷Disc is loaded upside down.
÷Disc is loose.
÷Load the disc again with its label side up.
÷Insert the disc properly.
÷Wipe off the dust on the surface of the disc
referring to “Disc handling precautions”. ™
÷Replace the disc with a new one.
Disc is loaded, player does not play.
÷Disc is dirty.
÷Disc is cracked.
÷Condensation has occurred on the optical lens ÷Leave the player for about 1 hour so that the
unit.
condensation is removed.
™
÷Play mode is not entered.
÷Press the 6key.
No sound.
÷Disc is too dirty.
÷Wipe off the dust on the disc surface referring
to “Disc handling precautions”.
÷Replace the disc with a new one.
÷Connect all connection cords firmly.
÷Adjust the output level with OUTPUT key on
the remote control unit.
™
÷Disc is cracked.
÷The connection cords are inserted loosely.
÷Output level is attenuated too low.
5
÷Disc is too dirty.
Music is interrupted. (Sound is skipped.)
÷Wipe off the dust on the disc surface referring
to “Disc handling precautions”.
™
÷Disc is cracked.
÷Oscillation is applied to this unit.
÷Replace the disc with a new one.
÷Try selecting a place where no strong vibra-
tions occur by changing the installation place,
etc.
÷This unit is designed so that play begins auto-
matically when the unit is turned ON if a disc
is already loaded.
Play begins as soon as the unit is turned
ON.
÷If automatic play is not required, remove the
disc from the player before setting the unit to
STANDBY mode.
Remote control unit
Symptom
Cause
Remedy
÷Batteries are exhausted.
÷Replace with new batteries.
÷Operate the remote control unit within the con-
trollable range.
8
Remote control operation is not possi-
ble.
÷The remote control unit is too far away from
the main system, controlling angle is too large,
or there is an obstacle in between.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DP-R7090/R6090 (En)
DP-R7090
DP-R6090
24
[ Format ]
[ Format ]
System ............................ Compact disc digital audio system
Laser ........................................................ Semiconductor laser
System ............................ Compact disc digital audio system
Laser ........................................................ Semiconductor laser
[ D/A Convertors ]
[ D/A Convertors ]
D/A Conversion ............................1 Bit (24 bit Fine D.R.I.V.E.)
Oversampling ................................................. 32 fs (1411 kHz)
D/A Conversion .............................................. 1 Bit (D.R.I.V.E.)
Oversampling ..................................................... 8 fs (352 kHz)
[ Audio ]
[ Audio ]
Frequency response ............................. 4 Hz – 20 kHz, 0.5 dB
Signal to noise ratio.................................... More than 110 dB
Dynamic range ............................................ More than 100 dB
Total harmonic distortion + noise
Frequency response ............................. 4 Hz – 20 kHz, 0.5 dB
Signal to noise ratio.................................... More than 100 dB
Dynamic range .............................................. More than 95 dB
Total harmonic distortion + noise
..................................................... Less than 0.003% (at 1 kHz)
Channel separation ....................More than 100 dB (at 1 kHz)
Wow & flutter ......................................... Unmeasurable Limit
Output level/impedance
..................................................... Less than 0.005% (at 1 kHz)
Channel separation ......................More than 95 dB (at 1 kHz)
Wow & flutter ......................................... Unmeasurable Limit
Output level/impedance
Variable ................................................. (Max.) 2 V/0.3 kΩ
Digital output
Variable ................................................. (Max.) 2 V/0.3 kΩ
Digital output
Coaxial ......................................................0.5 V p-p / 75 Ω
Optical.............................................. –15 dBm – –21 dBm
(Wave length 660 nm)
Coaxial ......................................................0.5 V p-p / 75 Ω
Optical .............................................. –15 dBm – –21 dBm
(Wave length 660 nm)
Headphone output (Max.) ................................. 20 mW (32 Ω)
Headphone output (Max.) ................................. 20 mW (32 Ω)
[ General ]
[ General ]
Power consumption..........................................................14 W
Dimensions ........................................ W: 440 mm (17-5/16")
H: 125 mm (4-15/16")
Power consumption..........................................................14 W
Dimensions ........................................ W: 440 mm (17-5/16")
H: 125 mm (4-15/16")
D: 397 mm (15-5/8")
D: 397 mm (15-5/8")
Weight (Net) ..................................................... 5.0 kg (11.0 lb)
Weight (Net) ..................................................... 5.0 kg (11.0 lb)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
NNootteess 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
For the U.S.A.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to
radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver in connected.
– Consult the dealer or an experienced radio/TV technician for help.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|