®
Refrigerator
Top Mount
Use & Care Guide
Refrigerador
Congelador Superior
Guía para su uso y cuidado
Réfrigérateur
Compartiments Superposés
Guide d’utilisation et d’entretien
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
241815202 (Jan 2008)
Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
KENMORE APPLIANCE WARRANTY
OneYear LimitedWarranty
When installed, operated and maintained according to all
instructions supplied with the product, if this appliance
fails due to a defect in material or workmanship within one
year from the date of purchase, call 1-800-4-MY-HOME®
to arrange for free repair.
WARNING
These guidelines must be followed to ensure that safety
mechanisms in this refrigerator will operate properly.
ELECTRICAL INFORMATION
•
The refrigerator must be plugged into its own
dedicated 115Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards. It must be plugged directly
into a properly grounded three-prong receptacle.The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
Immediately repair or replace any power cord that
becomes frayed or damaged.
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor.Such damage is
not covered under your warranty.
If this appliance is used for other than private family
purposes, this warranty applies for only 90 days from the
date of purchase.
This warranty covers only defects in material and
workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use,
including but not limited to filters, belts, light bulbs and
bags.
•
•
2. A service technician to instruct the user in correct
product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions
supplied with the product.
•
•
5. Damage to or failure of this product resulting from
accident, abuse, misuse or use for other than its
intended purpose.
6. Damage to or failure of this product caused by the use
of detergents, cleaners, chemicals or utensils other
than those recommended in all instructions supplied
with the product.
•
•
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
7. Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
IMPORTANT
Customer’s sole and exclusive remedy under this limited
warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or
fitness for a particular purpose, are limited to one year or
the shortest period allowed by law. Sears shall not be
liable for incidental or consequential damages. Some
states and provinces do not allow the exclusion or limita-
tion of incidental or consequential damages, or limitations
on the duration of implied warranties of merchantability or
fitness, so these exclusions or limitations may not apply
to you.
Turning the Freezer and Fresh Food Controls to “0” turns off
the compressor and prevents your refrigerator from cooling,
but does not disconnect the power to the light bulb and other
electrical components. To turn off power to your refrigerator
you must unplug the power cord from the wall outlet.
This warranty applies only while this appliance is used in
the United States and Canada.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA,Hoffman Es-
tates, IL 60179
Sears Canada Inc.,Toronto,Ontario, Canada M5B 2B8
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MASTER PROTECTION AGREEMENTS
Master Protection Agreements
Congratulations on making a smart purchase. Your new Kenmore® product is designed and manufactured for years of
dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new product. Here’s what the Agreement* includes:
;
Parts and labor needed to help keep products operating properly under normal use, not just defects. Our coverage
goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage – real
protection.
;
Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you can
trust will be working on your product.
;
;
Unlimited service calls and nationwide service, as often as you want us, whenever you want us.
“No-lemon” guarantee – replacement of your covered product if four or more product failures occur within twelve
months.
;
;
;
Product replacement if your covered product can’t be fixed.
Annual Preventive Maintenance Check at your request – no extra charge.
Fast help by phone – we call it Rapid Resolution – phone support from a Sears representative on all products. Think
of us as a “talking owner’s manual”.
;
;
Power surge protection against electrical damage due to power fluctuations.
$250 Food Loss Protection annually for any food spoilage that is the result of mechanical failure of any covered
refrigerator or freezer.
;
;
Rental reimbursement if repair of your covered product takes longer than promised.
10% discount off the regular price of any non-covered repair service and related installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime
day or night, or schedule a service appointment online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period,
we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master
Protection Agreement today!
Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full details call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in
the U.S.A. or Canada call 1-800-4-MY-HOME®.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
This Use & Care Manual provides specific operating
DOOR OPENING
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See Door
Removal & Reversal Instructions.
LOCATION
•
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
NOTE
•
If your refrigerator is placed with the door hinge side against
a wall, you may have to allow additional space so the door
can be opened wider.
•
•
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
INSTALLATION
To LevelYour Refrigerator:
1. Remove toe grille.
CAUTION
DO NOT install the refrigerator where the temperature will
drop below 55°F (13°C) or rise above 110°F (43°C).The
compressor will not be able to maintain proper
temperatures inside the refrigerator.
2. Use flat-blade screwdriver
or 3/8” socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
DO NOT block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
NOTE
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼”
to ½” from front to back. Then level the refrigerator from side
to side.
IMPORTANT
If you install your refrigerator in a garage or other unheated
area, you may experience freezer temperature problems
during the winter months when temperatures dip below
55° F.
Upgrading your refrigerator with a Garage Kit will lower the
minimum operating temperature of your unit to 34° F. This kit
can be ordered through Sears stores or Sears Parts & Repair
at an additional cost.
Installation Clearances
Raise
•
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Stationary Front Roller
with Leveling Screw
(some models)
Adjustable Front Roller
(some models)
Sides & Top
Back
3/8”
1”
NOTE
If you see black coils/tubing on the back of your refrigerator
(air-cooled condenser) leave 3” clearance at top of
refrigerator.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING HOUSEHOLD WATER SUPPLY TO REFRIGERATOR
To ConnectWater Supply LineTo Ice Maker InletValve
1. Disconnect refrigerator from electric power source.
WARNING
To avoid electric shock, which can cause death or severe
personal injury, disconnect the refrigerator from electrical
power before connecting a water supply line to the
refrigerator.
2. Place end of water supply line into sink or bucket. Turn ON
water supply and flush supply line until water is clear. Turn
OFF water supply at shutoff valve.
3. Unscrew plastic cap from water valve inlet and discard
cap.
4. Slide brass compression nut, then ferrule (sleeve) onto
water supply line, as shown.
5. Push water supply line into water valve inlet as far as it
will go (¼ inch). Slide ferrule (sleeve) into valve inlet and
finger tighten compression nut onto valve. Tighten another
half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to
rear panel of refrigerator as shown.
7. Coil excess water supply line (about 2½ turns) behind
refrigerator as shown and arrange coils so they do not
vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any
connections that leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (see ice
maker front cover for ON/OFF position of arm).
CAUTION
To Avoid Property Damage:
•
Copper tubing is recommended for the water supply
line.Water supply tubing made of ¼”plastic is not
recommended since it greatly increases the potential
for water leaks. Manufacturer will not be responsible
for any damage if plastic tubing is used for supply
line.
DO NOT install water supply tubing in areas where
temperatures fall below freezing.
Chemicals from a malfunctioning softener can
damage the ice maker. If the ice maker is connected
to soft water, ensure that the softener is maintained
and working properly.
•
•
IMPORTANT
Ensure that your water supply line connections comply with
all local plumbing codes.
Before InstallingTheWater Supply Line,YouWill Need
•
•
•
Basic Tools: adjustable wrench, flat-blade screwdriver,
and PhillipsTM screwdriver
Access to a household cold water line with water pressure
between 30 and 100 psi.
A water supply line made of ¼ inch (6.4 mm) OD, copper
tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker
inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning (as shown).
•
•
A shutoff valve to connect the water supply line to your
household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the
water supply line to the ice maker inlet valve.
NOTE
A water line kit is available from Sears stores or Sears Parts
& Repair at an additional cost.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
Plastic
Putty
Knife
Tools Necessary:
Awl
(OR)
OR
Pliers
Phillips™ head
or™
Socket
Wrench Set
Quadrex head
screwdriver
Adjustable
Wrench
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE
The direction in which your refrigerator doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one
side to the other. Reversing the door swing should be performed by a
qualified person.
Top Hinge
Cover
IMPORTANT
Top Hinge
Before you begin, turn the refrigerator temperature control to “0” and remove
the electrical power cord from the wall outlet. Remove any food from door
shelves.
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft lead pencil.
This makes reinstallation easier. Remove top hinge and lift door off center
hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to slide out.
Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside
screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8” socket wrench.
8. Install bottom hinge on opposite side with the two screws removed from
step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to
other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instructions on next page).
11. Move freezer and refrigerator door stops to opposite side. Before starting
screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin
through center hinge into top of door. Close refrigerator door to help align
hinge hole.
Door
Stop
Door Stop
Screw
Washer
Hinge
Pin
Bottom
Hinge
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
Screws
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
17. Flip toe grille and reinstall.
Toe Grille
18. Plug in electrical power cord and turn refrigerator temperature control to
center position. Adjust setting as necessary.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO REMOVE REFRIGERATOR HANDLE:
NOTE
(Handles may be easier to reverse while doors are off.)
Some models have “pocket” handles, which are recessed
into the sides of the door. On those models, only the hinges
will need to be reversed. Other models will have the handles
shown on the next three pages.
1. Remove two screws attaching handle to top of
refrigerator door.
2. Swing top of handle away from door and slide handle
down and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding holes to
opposite side.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of
freezer door.
TO ATTACH REFRIGERATOR HANDLE:
2. Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding holes to
opposite side.
1. Start with handle offset away from door. Place bottom
of handle over dovetail button, swing handle into an
upright position and pull upward, locking it into place.
2. Secure top of handle with screws.
TO ATTACH TRIM:
1. Slide both trim locks out of trim.
2. Insert new adhesive trim locks contained in your literature
pack.
TO ATTACH FREEZER HANDLE:
1. Start with handle offset away from door. Place top of
handle over dovetail button, swing handle into an upright
position and pull downward, locking it into place.
2. Secure bottom of handle with two screws removed earlier.
NOTE
Trim lock must be removed and installed by sliding over the
two donut shaped areas.
3. Install trim to handle by sliding over base of handle.
Carefully align trim and press down at trim lock locations.
4. Replace hole plug on opposite side. Use rubbing alcohol
to remove any adhesive residue from old trim lock
locations.
TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door.The top of the trim fits around the base of
the handle. An adhesive “trim lock” is positioned about halfway
down. The bottom of the trim is held in place by either an
adhesive trim lock, or a trim lock with two prongs inserted
into a hole on the face of the door.
TO REMOVE TRIM:
1. Remove trim by gently pulling trim lock areas out and
away from door.
2. When trim is free from door, slide the trim straight down
and away from base of handle.
NOTE
For models with short handle trim, remove by sliding trim
straight down and off of handle bracket.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO REMOVE REFRIGERATOR HANDLE:
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of
freezer door.
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to top of
refrigerator door.
2. Slide handle straight up and pull handle off dovetail
screw on door.
2. Slide handle straight down and pull handle off dovetail
screw on door.
3. Remove dovetail screw from door and install on other
side, moving hole plugs from corresponding holes to
opposite side.
3. Remove dovetail screw from door and install on other
side, moving hole plugs from corresponding holes to
opposite side.
TO ATTACH REFRIGERATOR HANDLE:
TO ATTACH FREEZER HANDLE:
1. Place top ofhandle over dovetail screw, pull handle
straight down until handle is aligned with screw holes on
top of door.
1. Place top ofhandle over dovetail screw, pull handle
straight up until handle is aligned with screw holes on
bottom of door.
2. Secure top of handle with two screws removed earlier.
2. Secure bottom of handle with two screws removed earlier.
TO REVERSE REFRIGERATOR/FREEZER HANDLES:
Handles may be easier to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
Handle Reversal
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO ATTACH FREEZER HANDLE:
CAUTION
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in bottom of handle
with the 2 holes in bottom of door. Handle should be
mounted with set screw facing towards center of
door.Do not tighten the set screw yet.
Wear gloves and use extreme CAUTION when
installing these handles.The rounded end of the
handles may be sharp.
2. Install the 2 screws into the bottom of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
IMPORTANT
To ensure proper installation of handles, please review
these instructions and pictures thoroughly prior to
installing the handles.
Additionally, before installing the door handles, make
sure the door swing is correct. Follow instructions in the
Use & Care Guide to reverse the doors, if necessary.
TO ATTACH REFRIGERATOR HANDLE:
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in top of handle with
the 2 holes in top of door. Handle should be mounted
with set screw facing towards center of door. Do
not tighten the set screw yet.
2. Install the 2 screws into the top of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO REVERSE REFRIGERATOR/FREEZER HANDLES:
Handles may be easier to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
Handle Reversal
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AT A GLANCE
Ice Tray
Freezer Light
Ice Maker
Ice Bucket
Freezer Shelf
Fixed Door Bin
Door Rack
Freezer
Control
Refrigerator
Control
Dairy Door
Deli Drawer
Cover
Tall Bottle
Retainer
Deli Drawer
Half Shelf
Snugger
Wine Rack
Door Bin
Full Shelf
Special Item Rack
Fixed Door Bin
Mid Level Light
Crisper Cover
Door Rack
Crisper
Drawers
Toe Grille
Features may vary according to model
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TEMPERATURE CONTROLS
COOL DOWN PERIOD
TEMPERATURE ADJUSTMENT
To ensure safe food storage, allow the refrigerator to operate
with the doors closed for at least 8 to 12 hours before loading
it with food.
•
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
•
•
For colder temperatures, turn the knob towards Colder.
For warmer temperatures, turn the knob towards Cold.
REFRIGERATOR & FREEZER CONTROLS
Turning the refrigerator control will change temperatures in
both compartments. For example, if the refrigerator control is
turned to a colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer control will
change only the freezer temperature.
NOTE
When making changes to the temperature controls, wait 24
hours for the temperature to stabilize before making
additional changes.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good circulation,
do not block cold air vents with food items.
NOTE
When first turning refrigerator on, move refrigerator and
freezer controls to Normal. This is the recommended initial
setting. After 24 hours, adjust the controls as needed.
* IMPORTANT
Turning the refrigerator temperature control to “0” turns off the
compressor and prevents the refrigerator from cooling, but
does not disconnect the power to the light bulb and other
electrical components. To turn off power to your refrigerator,
you must unplug the power cord from the wall outlet.
OR
Freezer Control (some models)
OR
OR
Refrigerator & Freezer Control (some models)
Refrigerator Control (some models)
TEMPERATURE ADJUSTMENT GUIDE
Turn Refrigerator Control Slightly Towards Colder.
Turn Refrigerator Control Slightly Towards Cold.
Turn Freezer Control Slightly Towards Colder.
Turn Freezer Control Slightly Towards Cold.
Turn Refrigerator Control To 0.
If Refrigerator compartment Is Too Warm
If Refrigerator compartment Is Too Cold
If Freezer compartment Is Too Warm
If Freezer compartment Is Too Cold
* To Turn Refrigerator Off
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LOOKING INSIDE
DOOR STORAGE
CAUTION
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Some models have door
racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
1
2
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this
procedure.
Door Rack
storage of cheese, spreads,
or butter.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
1. Lift bin straight up.
2. Remove bin.
Sliding Glass Shelf
Sliding Wire Shelf
To adjust cantilever shelves:
3. Place bin in
desired position.
4. Lower bin onto
supports until
NOTE
locked in place.
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either glass
or wire.
Adjustable
Door Bin
1
2
Lift front edge up.
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
SpillProofTM glass shelves (some models) catch and hold
accidental spills. In some models, the SpillProofTM shelves
slide out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets. Just
pull the front of the shelf forward. The shelf can be extended as
far as the stopper will allow but it is not removable from the
cantilever bracket.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Tall Bottle Retainer (left) and Bin Snugger (right)
Full Width Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixed and Sliding
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LOOKING INSIDE (CONTINUED)
CRISPERS (SOME MODELS)
FREEZERTILT OUT
DOORRACK
The crispers, located under
the bottom refrigerator shelf,
are designed for storing fruits,
vegetables, and other fresh
produce. Wash items in clear
water and remove excess
water before placing them in
the crispers. Items with strong
odors or high moisture content
should be wrapped before
storing.
Freezer Tilt Out Door Rack
Crisper Drawer
WINE RACK (SOME MODELS)
HUMIDITY CONTROL
(SOME MODELS)
There are two different style Wine Racks. (See A and B
below.)TheWine Rack stores bottles of wine, or single two-
liter plastic bottles of juice or soda pop.To install, slide Wine
Rack (A) onto the shelf with the curve facing in.To remove,
slide the Wine Rack out. Install on either side of shelf. The
Wire Wine Rack (B) simply sets on the shelf.
The Humidity Control,
present on some models
with crisper drawers, allows
you to adjust the humidity
within the crisper. This can
extend the life of fresh
vegetables that keep best in
high humidity.
Crisper Humidity
Control
NOTE
Leafy vegetables keep best when stored with the Humidity
Control set on High Humidity, or in a drawer without a
Humidity Control. This keeps incoming air to a minimum and
maintains maximum moisture content.
A
DELI DRAWER (SOME
MODELS)
Some models are equipped
with a Deli Drawer for storage
of luncheon meats, spreads,
cheeses, and other deli items.
Wine Racks
B
Deli Drawer
SPECIAL ITEM RACK (SOME MODELS)
The innovative design of the
Special Item Rack allows you
to store a six-pack of 12 ounce
drink cans, a bottle of wine, a
two-liter soft drink bottle, or a
carton of eggs. The Special
Item Rack mounts on the left
side of your refrigerator. To
install, just slide the Special
Item Rack onto any shelf as
shown in the drawing.
Special Item Rack
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD STORAGE & ENERGY SAVING IDEAS
ENERGY SAVING IDEAS
Locate the refrigerator in the coolest
part of the room, out of direct
sunlight, and away from heating
ducts or registers. Do not place the
refrigerator next to heat-producing
appliances such as a range, oven,
or dishwasher. If this is not possible,
a section of cabinetry or an added
FOOD STORAGE IDEAS
Fresh Food Storage
•
•
The fresh food compartment should be kept between 34°F
and 40° F with an optimum temperature of 37° F.
Avoid overcrowding the refrigerator shelves. This reduces
the circulation of air around the food and results in uneven
cooling.
•
Fruits andVegetables
layer of insulation between the two appliances will help
the refrigerator operate more efficiently.
Level the refrigerator so that the doors close tightly.
Refer to this Use & Care Manual for the suggested
temperature control settings.
•
Storage in the crisper drawers traps moisture to help
preserve the fruit and vegetable quality for longer time
periods.
•
•
Meat
•
•
•
•
Periodic cleaning of the condenser will help the
refrigerator run more efficiently. See the Care and
Cleaning Chart .
Do not overcrowd the refrigerator or block cold air vents.
Doing so causes the refrigerator to run longer and use
more energy.
Cover foods and wipe containers dry before placing them
in the refrigerator. This cuts down on moisture build-up
inside the unit.
Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and close
the door as soon as possible.
•
Raw meat and poultry should be wrapped securely so
leakage and contamination of other foods or surfaces
does not occur.
Frozen Food Storage
•
•
The freezer compartment should be kept at 0° F or lower.
A freezer operates most efficiently when it is at least 2/3
full.
Packaging Foods for Freezing
•
To minimize dehydration and quality deterioration, use
aluminum foil, freezer wrap, freezer bags or airtight
containers. Force as much air out of the packages as
possible and seal them tightly. Trapped air can cause food
to dry out, change color, and develop an off-flavor (freezer
burn).
•
•
Wrap fresh meats and poultry with suitable freezer wrap
prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
•
•
•
Avoid adding too much warm food to the freezer at one
time. This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods.
Leave a space between the packages, so cold air can
circulate freely, allowing food to freeze as quickly as
possible.
Avoid storing hard-to-freeze foods such as ice cream and
orange juice on the freezer door shelves. These foods are
best stored in the freezer interior where the temperature
varies less.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ICE SERVICE
If your refrigerator has an automatic ice maker, it will provide a
ICE MAKERTIPS
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, no ice will be produced during the first 24
hours of operation. Air in new plumbing lines may cause the
ice maker to cycle two or three times before making a full tray
of ice. With no usage, it will take approximately one to two days
to fill the ice container.
•
Ice cubes stored too long may develop an odd flavor.
Empty the ice container and ensure that the wire signal
arm is in its “down” or ON position. The ice maker will then
produce more ice.
Occasionally shake the ice container to keep ice
separated.
Stop the ice maker when cleaning the freezer and during
vacations.
If the ice maker will be turned off for a long period of time,
turn the water supply valve to a closed position.
•
•
•
New plumbing connections may cause the first production of
ice cubes to be discolored or have an odd flavor. Discard ice
made during the first 24 hours.
NOTE
NOTE: Automatic ice makers are also optional accessories
that may be installed in most models at antime.
Call 1-800-4MY-HOME for information.
NOTE
For information on ice maker noises, see Normal Operating
Sounds and Sights section.
TURNINGYOUR ICE MAKER ON
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its “down” or ON position.
CAUTION
DO NOT place the ice container in your dishwasher.
•
•
•
Wash the ice container in warm water with mild detergent.
Rinse well and dry.
Stop the ice maker when cleaning the freezer and during
vacations.
If the ice maker will be turned off for a long period of time,
turn the water supply valve to the closed position.
TURNINGYOUR ICE MAKER OFF
To stop the ice maker, lift the
wire signal arm until it clicks and
locks in the “up” or OFF position.
The ice maker also turns off
automatically when the ice
container is full. If your model
has an adjustable freezer shelf,
place the shelf in the lower
position, so that the wire signal
arm will hit the ice when the
container is full.
IMPORTANT
Your ice maker is shipped from the factory with the wire
signal arm in the ON position. To ensure proper function of
your ice maker, hook up water supply immediately or turn ice
maker OFF by lifting the wire signal arm until it clicks and
locks in the UP position. If the ice maker is not turned off
and the water supply is not connected, the water valve will
make a loud chattering noise.
ICE PRODUCTION:WHATTO EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24
hours depending on usage conditions. Ice is produced at a
rate of 8 cubes every 80 to 160 minutes.
CAUTION
Chemicals from a malfunctioning softener can damage
the ice maker. If the ice maker is connected to soft water,
ensure that the softener is maintained and working
properly.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL OPERATING SOUNDS & SIGHTS
UNDERSTANDINGTHE SOUNDSYOU MAY HEAR
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will become
familiar to you. They also indicate your refrigerator is operating
as designed. Hard surfaces, such as vinyl or wood floors,
walls, and kitchen cabinets may make sounds more
B. Evaporator Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
noticeable. Listed below are descriptions of some of the most
common sounds you may hear, and what is causing them.
C. Defrost Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
NOTE
Rigid foam insulation is very energy efficient, but is not a
sound insulator.
IMPORTANT
During the automatic defrost cycle, you may notice a red
glow in the vents on the back wall of your freezer
compartment. This is normal during the defrost cycle.
D. Automatic Ice Maker
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
E. Cold Control & DefrostTimer or Automatic
Defrost Control
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
F. Condenser Fan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H. WaterValve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
I. Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser Coils (Fan-cooled models only)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at least
twice a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not
wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall outlet before cleaning.
CAUTION
•
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may tear or gouge
the floor covering. If the refrigerator has an automatic ice maker, be careful not to move the refrigerator beyond the
plumbing connections.
•
•
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
Never use CHLORIDE to clean stainless steel.
NOTE
•
•
Turning the refrigerator temperature control to “0” turns off the compressor, but does not disconnect electrical power to the
light bulb or other electrical components. To turn off power to your refrigerator, you must unplug the power cord from the wall
outlet.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing adhesive labels.
Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue residue
with the sticky side of tape you have already removed. Do not remove the serial plate.
Care & Cleaning Chart
Part
What To Use
Soap and water
Tips and Precautions
Interior/Door
Liner
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls, light
bulb or any electrical part.
•
•
Baking soda and water
Wipe gaskets with a clean soft cloth.
Door Gaskets
Drawers/Bins
Glass Shelves
•
•
Soap and water
Soap and water
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Allow glass to warm to room temperature before immersing in warm water.
•
•
•
Soap and water
Glass cleaner
Mild liquid sprays
Toe Grille
Vacuum dust from front of toe grille. Remove toe grille Vacuum backside and wipe
with sudsy cloth or sponge. Rinse and dry.
•
•
•
Soap and water
Mild liquid sprays
Vacuum attachment
Do not use commercial household cleaners, ammonia, or alcohol to clean handles.
Exterior and
Handles
•
Soap and water
Exterior and
Handles
•
•
•
Soap and water
Ammonia
Stainless Steel Cleaners
CAUTION: Never use CHLORIDE to clean stainless steel.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or major
department stores. Always follow manufacturer's instructions.
(Stainless Steel
Models Only)
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain scratching.
Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well,
and wipe dry with a clean soft cloth.
No need to clean unless operating refrigerator under particularly dusty or greasy
conditions, or if there is significant pet traffic in your home. If cleaning is necessary,
remove toe grille and use extended vacuum attachment and condenser cleaning
brush to remove dust build-up from condenser coils (see item “J” in “NORNAL
OPERATING SOUNDS & SIGHTS”).
Condenser Coils
(Fan-cooled
models only)
•
•
Condenser Cleaning Brush is
available from your dealer.
Vacuum Cleaner
Condenser Coils
(Air-cooled models
only)
Use the dusting tool attachment on your vacuum to remove dust build-up on the
condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.
•
•
Vacuum Cleaner
Soap and water
Some models have defrost water pan located on top of compressor at bottom rear
of refrigerator (see illustration on next page). Wipe water pan with damp cloth.
NOTE: The defrost water pan is NOT removable.
Defrost Water Pan
Exterior
•
•
Soap and water
Mild liquid sprays
CAUTION: DO NOT use abrasive or stainless steel cleaners on Easy Care
Stainless Steel Models. It will remove the protective finish.
(Easy Care
Stainless Steel
Models)
Use warm soapy water to clean Easy Care surfaces. Mild liquid sprays may be
used on stubborn spots.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING (CONTINUED)
NEVER CLEAN CONDENSER (SOME MODELS)
CAUTION
If your refrigerator is
equipped with a
Never Clean
Wear gloves to avoid cuts when replacing light bulbs.
condenser, there’s
no need to clean the
condenser under
normal operating
conditions. If the
refrigerator is
operated under
particularly dusty or
greasy conditions, or
if there is significant
pet traffic in your
Defrost Water Pan (some models)
home, it may be necessary to periodically clean the condenser
for maximum efficiency.
Freezer Light Cover Removal
REPLACINGTHE FREEZER LIGHT BULB (SOME
MODELS)
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Unsnap light shield as shown.
4. Unscrew and replace old bulb with an appliance bulb of
the same wattage.
5. Replace light shield.
6. Remember to plug the refrigerator back in.
Refrigerator Mid-Level Light Cover Removal
Vacation and Moving Tips
•
•
•
Leave refrigerator operating during vacations of 3 weeks or less.
Short
Vacations
Use all perishable items from refrigerator compartment.
Turn automatic ice maker off and empty ice bucket, even if you will only be gone for a
few days.
•
•
•
•
•
Remove all food and ice if you will be gone one month or more.
Turn controls to "O" ( the OFF position) and disconnect power.
Turn off automatic ice maker and turn water supply valve to closed position.
Clean interior thoroughly.
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
Long
Vacations
•
•
•
•
Remove all food and ice.
If using handcart, load from side.
Adjust rollers all the way up to protect them during sliding or moving.
Pad cabinet to avoid scratching surface.
Moving
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workmanship
or materials in this appliance.
Common
Occurrences
•
•
•
•
Ensure plug is tightly pushed into electrical outlet.
Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
The temperature control is turned to "O".
Refrigerator does not run.
Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Freezer temperature too cold.
Refrigerator temperature is
satisfactory.
•
•
Set freezer control to a warmer setting until freezer temperature is satisfactory.
Allow 24 hours for the temperature to stabilize.
Refrigerator temperature too cold.
Freezer temperature is satisfactory.
Set refrigerator control to a warmer setting. Allow 24 hours for temperature to
stabilize. Then check freezer temperatures and adjust as needed.
•
•
•
The cabinet is not level.
Floor is weak.
See Normal Operating Sounds and Sights section.
Refrigerator is noisy or vibrates.
Odors in refrigerator.
•
•
Interior needs to be cleaned.
Foods that produce odors should be covered or wrapped.
•
•
•
Replace light bulb.
Ensure plug is tightly pushed into electrical outlet.
Light switch may be stuck. Push in light switch, located on the refrigerator
control box, to release.
Cabinet light not working.
•
•
•
•
•
Ensure the Wire Signal Arm is not in UP position.
Ice maker should produce 2.5 to 3 pounds of ice in a 24 hour period.
Water supply is turned off.
Water pressure is too low.
The freezer is not cold enough.
Automatic ice maker not working.
(some models)
ATTENTION
To Properly Install Your Refrigerator
See “Installation” Section On Pages 5-6
OR
To Reverse The Doors
See “Door Removal & Reversal” Section On Pages 7-10
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Get it fixed, at your home or ours!
Your Home
For expert troubleshooting and home solutions advice:
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME® (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.)
1-800-469-4663 (Canada)
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-800-LE-FOYERMC
1-888-SU-HOGAR®
(1-800-533-6937)
(1-888-784-6427)
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
MC Marque de commerce / MD Marque déposée de Sears Brands, LLC
© Sears Brands, LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
|