MODEL
840638
19.2V BATTERY PACK
INSTRUCTION MANUAL
Conforms to UL STD 60745-1,
60745-2-1,60745-2-2
Certified to CAN/CSA-C22.2 STD
60745-1-04, 60745-2-1-04, 60745-2-2-04
Contains UL Listed Adapter
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
87-1904-60957
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS
PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT
LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS
CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
PARA EL SERVICIO
PARA EL CONSUMIDOR
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS
PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,
HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR
COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US.
1-800-590-3723
Printed in China
Imprimé dans la Chine
Impreso en China
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
691240-19.2V Battery Pack, 690072-Charger, 690074-120V AC Adapter
_Rev 7/27/07
Download from Www.Somanuals.com. All Manuals Search And Download.
WORK AREA
CAUTION
indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
Keep your work area clean and well lit.
areas may cause accidents or injury.
Cluttered work benches and dark work
CAUTION
used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Do not operate power tools in explosive areas, such as in the presence of
flammable liquids, gases or dust.
the dust or fumes.
Power tools create sparks which may ignite
NOTE
provides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.
Keep bystanders, children and visitoors away while operating a power tool.
Distractions can cause you to lose control.
IMPORTANT SAFEGUARDS
ELECTRICAL SAFETY
People with electronic devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of
the pacemaker.
Do not abuse the cord. Never use the cord to carry the tool, pulling or unplug-
ging the power tool. Keep the cord away from heat, oil, sharp edges, or mov-
ing parts. Replace damaged cords immediately.
a fire.
Damaged cords may create
WARNING:
Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm.
Damaged or entangled cords increase the risk of electric shock.
A battery operated tool with integral batteries or a separate battery pack
must be recharged only with the specified charger for the battery.
that may be suitable for one type of battery may create a risk of fire when used with
another battery.
Some examples of these chemicals are:
• Lead from lead-based paints.
A charger
• Crystalline silica from bricks and cement and other masonry products,
and arsenic and chromium from chemically-treated lumber.
Use battery operated tool only with specifically designated battery pack.
any other batteries may create risk of fire.
Use of
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with grounded power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
WARNING:
Handling the power cord on corded products may expose you to
Avoid body contact with grounded surfaces such as pipes, radiators, ranges
lead, a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
and refrigerators.
grounded.
There is an increased risk of electric shock if your body is
Do not expose power tools to rain or wet conditions.
tool will increase the risk of electric shock.
Water entering a power
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
shock.
Use of a cord suitable for outdoor use reduces the risk of electric
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONAL SAFETY
Recharge only with the charger specified by the manufacturer.
A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool. Do not use tool while tired or under the influence of drugs,
Use power tools only with specifically designated battery packs.
other battery packs may create a risk of injury and fire.
Use of any
alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that can
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
jewelry or long hair can be caught in moving parts.
Loose clothes,
make a connection from one terminal to another.
nals together may cause burns or a fire.
Shorting the battery termi-
Avoid accidental starting. Be sure switch is in the locked or “OFF” position
Under abusive conditions, liquid may be ejected from the battery, avoid con-
tact.
before inserting battery pack.
Carrying power tools with your finger on the
If contact accidentally occurs, flush with water. If liquid contacts eyes,
“ON”
switch or inserting battery pack into a tool with the power switch
accidents.
invites
additionally seek medical help. Liquid ejected from the battery may cause irrita-
tion or burns.
Remove adjusting keys or wrenches before turning the tool “ON”.
A wrench
Store idle tools out of reach of children and other untrained persons.
are dangerous in the hands of untrained users.
Tools
or a key that is left attached to a rotating part of the tool may result in person-
al injury.
When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
Do not overreach. Keep proper footing and balance at all times.
ing and balance enable better control of the tool in unexpected situations.
Proper foot-
make a connection from one terminal to another.
nals together may cause sparks, burns or a fire.
Shorting the battery termi-
Use safety equipment. Always wear eye protection. Dust mask, non-skid safe-
ty shoes, hard hat, or hearing protection must be used for appropriate conditions.
Maintain tools with care. Keep cutting tools sharp and clean
. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
devices can reduce dust-related hazards.
Use of these
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If dammaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model.
TOOL USE AND CARE
Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Use clamps or other practical ways to secure and support the workpiece to a
stablle platform.
Holding the work by hand or against your body is unstable and
SERVICE
may lead to loss of control.
Do not force tool. Use the correct tool for your application.
The correct tool
will do the job better and safer at the rate for which it is designed.
Tool service must be performed only by qualified repair personnel.
or maintenance by unqualified personnel may result in a risk of injury.
Service
Do not use the tool if the power switch does not turn it “ON” or “OFF”. A tool
that cannot be controlled with the switch is dangerous and must be repaired.
When servicing a tool, use only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
Disconnect battery pack from tool or place the switch in the locked or “OFF”
position before making any adjustments, changing accessories, or storing
Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to fol-
low Maintenance Instructions may create a risk of shock or injury.
the tool.
Such preventative safety measures reduce the risk of starting the tool
accidentally.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
FUNCTIONAL DESCRIPTION
5
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may contact hidden wiring.
Contact with a “live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
3
SYMBOLS
IMPORTANT:
Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
4
SYMBOL
NAME
EXPLANATION
2
1
V
A
Hz
W
Kg
Volts
Amperes
Hertz
Voltage (Potential)
Current
Frequency (Cycles per Second)
Power
Weight
Type of Current
Type of Current
CONTROLS AND COMPONENTS:
1. Battery Pack
2. Release Buttons on Each Side
3. 120V AC Adapter
Watt
Kilograms
Alternating Current
Direct Current
4. Charger
Alternating or Direct Current Type of Current
5. LED Charging Indicator
Earthing Terminal
Class II Construction
Minutes
Seconds
Diameter
Grounding Terminal
Denotes Double Insulation
Time
Time
Size of Drill Bits,
Grinding Wheels, etc.
No-load Rotational Speed
Revolutions, Surface Speed,
Strokes, etc. per Minute
min
s
COMPONENT
BATTERY PACK
CHARGER
MODEL NUMBER
691240
690072
690074
No load speed
Revolutions per Minute
120V AC ADAPTER
.../min
1,2,3, …
Ring Selector Settings
Speed, Torque or Position Settings
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The battery pack should always be recharged when the tool begins to run slowly.
BATTERY
When battery pack is not in use, keep it away from other metal objects such as
paper clips, coins, keys, nails, screws or other small metal objects that can
make a connection from one terminal to another.
together may cause sparks, burns, or fire.
Shorting the battery terminals
Before using battery pack, please read carefully all instruc-
tions and cautionary markings on battery pack, battery
charger and product using battery.
REMOVING / ATTACHING BATTERY PACK
®
Do not incinerate the battery pack even if it is severely
REMOVE BATTERY PACK:
1. Press both release buttons on either side of
the Cordless Tool to release the battery pack.
damaged or is completely worn out.
explode.
The battery pack can
Do not carry battery packs in aprons, pockets, or tool boxes, product kit
boxes, drawers, etc. with loose metal objects.
Battery pack terminals could
2. Pull battery pack free of Cordless Tool.
be short circuited causing damage to the battery pack, severe burns or fire.
ATTACH BATTERY PACK:
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic
1. Align the raised portion of the battery pack
with the groove in the battery compartment
of the Cordless Tool.
material by the Environmental Protection Agency.
Before disposing of dam-
aged or worn out Ni-Cad battery packs, check with your State Environmental
Protection Agency to find out about special restrictions on the disposal of these
battery packs, take them to your local recycling center for proper disposal, or
2. Press the battery pack into place. Make sure
the latches are securely fastened. Do not use
the Cordless Tool if the battery pack is not
seated properly.
RELEASE
BUTTON
1-800-822-8837
call
.
Use Kawasaki™ 19.2V Battery Pack #691034, #691240 or
691326witheitherOne-HourCharger#690507or3-5HourCharger#690072/Adapter
#690074. Use Kawasaki™ 19.2V Battery Pack #690071 or #691235 only with 3-5
Hour Charger #690072/Adapter #690074.
CHARGER
Before using battery charger, please read carefully all
instructions and cautionary markingss on battery charger, battery pack and
product using battery.
The battery is not fully charged.
8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5
hours for the battery to be fully charged.
Before first use, the battery pack requires
Always switch to a fresh battery when tool performance begins to diminish.
Severe heat is most destructive to a battery; the more heat generated, the faster
the battery loses power. A battery that gets too hot can have a shortened life.
The charger will not automatically turn “OFF” when the
battery pack is fully charged.
“ON”
The charging indicator light will remain
until the charger is disconnected from the electrical outlet.
Never over-discharge a battery by using the tool even after tool performance
Use only the charger which accompanied your product or direct replacement as
listed in this manual.
approved chargers with your product.
has decreased.
Do not attempt to discharge a tool’s battery by continuing to
Do not substitute any other charger. Use only Alltrade
pull on the tool trigger. When tool performance begins to diminish, stop the tool
and recharge the battery for optimal performance.
Do not disassemble charger.
Charge battery pack at ambient temperatures between 50° F – 104° F.
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet
or damp environments, or immersed in liquid.
Store tool and battery pack in locations where temperatures will not exceed
120°F.
This is important to prevent serious damage to the battery cells.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The battery pack and charger heat during charging.
Place the charger on a flat,
ACCESSORIES
non-flammable surface away from flammable materials with at least four inches of
clearance to allow proper air circulation around the charger and battery pack.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
When the battery pack requires recharging, a 3-5 hour charge allows the tool to
operate at full power.
A charging indicator light on the charger will illuminate to
show that charging is taking place.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be sure that the gauge is large enough to carry
CHARGING BATTERY PACK
the amount of current necessary for your power tool.
If not, your tool may experi-
BATTERY PACK
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table on next page).
CHARGE BATTERY PACK:
1. Make sure the trigger
on the Cordless Tool
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
120V AC
ADAPTER
“OFF”
is in the
position
and remove the battery
TOOL CURRENT RATING
CONDUCTOR SIZE IN A.W.G
pack from the Cordless Tool.
AMPERE
3-6
6-8
8-10
10-12
12-16
16-20
10FT.
18
18
18
16
25FT.
18
18
18
16
50FT.
18
18
18
14
100FT.
18
16
14
14
-
2. Plug 120V AC Adapter
into household outlet
LED LIGHT
and into side of battery
charger. Insert battery
pack into battery charger.
When the battery is placed
in the charger, the red LED
indicator light will remain on.
14
12
12
12
12
12
BATTERY
CHARGER
-
SPECIFICATIONS
3. When fully charged, reattach battery pack onto Cordless Tool,
making certain latches fasten securely. Cordless Tool will not
operate properly if the battery pack is not seated properly.
SPECIFICATIONS
Voltage
19.2V
Charger Input
Charging Time
Battery Type
120V
Approx. 3-5 hours
Ni-Cad
60Hz
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting
PROTECTING THE ENVIRONMENT
cleaning or maintenance.
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life,
recycle batteries with due care for our environment.
Always clean the battery pack using only a dry cloth. Do not use liquids.
Always unplug the charger before cleaning it.
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
Regularly clean the ventilation slots in your tool and charger using only a soft
brush or dry cloth.
1-800-822-8837
or call
. Collected batteries will be recycled or disposed of properly.
Never open the battery pack or charger.
Do not attempt to repair the battery pack
or charger yourself. Opening any of these parts will void your warranty.
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
any such nonconforming item and/or part is promptly returned to Alltrade’s facility
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)
within the applicable warranty period, with a written request by purchaser that
Alltrade repair and/or replace the nonconforming item and/or part. We recommend
that you keep the original product packaging in the event you need to ship the unit.
We suggest the package be insured against loss or in transit damage. When
sending your product include your name, address, phone number, dated proof
of purchase (or copy), and a statement about the nature of problem. Warranty
coverage is conditioned upon purchaser furnishing Alltrade with adequate written
proof that they are the original purchaser and of the original purchase date. Parts
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if
found to be defective and subject to warranty. Alltrade retains the sole discretion
to determine whether any item or part is nonconforming and, if so, whether the
item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace
the product, it may replace it with a new or reconditioned one of the same or
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of the warranty period. Typically, a defective product that is
returned within the first 30 days after the purchase date will be replaced; for items
returned after the first 30 days and within the warranty period, covered defective
parts not subject to normal wear and tear or other exclusions will be repaired or
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-
conforming item and/or part thereof shall constitute fulfillment of all
obligations to the purchaser. Alltrade shall not be responsible or liable for any
expense, including freight charges, or repairs made outside Alltrade’s facility, unless
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,
commercial loss or consequential damages.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723.
Cordless Drills/Screwdrivers
Impact Wrenches
Sanders
Reciprocating Saws
Routers
Rotary Tools
Jigsaws
Corded and Cordless Multi-Purpose Tools
Wide Range of Accessories and more
Circular Saws
Angle Grinders
2 YEAR LIMITED HOME USE WARRANTY
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail
purchaser of the accompanying KAWASAKI™ portable power tool and no one else
all parts of the product (except those parts referred to below which are specifically
excluded from such warranty (see Exclusions)) to be free from defects in materials
and workmanship for a period of two years from original date of purchase.
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS:
Kawasaki™ portable power tool is offered as a home use tool and carries a
This
HOME
USE WARRANTY
.
This tool is made for home use in the execution of
COMMERCIAL
projects and repairs in and around the home. Use of the tool for
PURPOSES OR ON A JOBSITE
is not covered under this warranty.
The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified, altered or used for any commercial purpose or on
a jobsite. This warranty does not apply to any other product and/or component
thereof manufactured or distributed by Alltrade, and does not apply to products
and/or components thereof designed, manufactured and/or assembled by others,
Exclusions
This warranty does not cover parts damaged due to normal wear, abnormal
conditions, misapplication, misuse, abuse, accidents, operation at other than
recommended pressures or temperatures, improper storage or freight damage.
Parts damaged or worn by operation in dusty environments are not warranted.
Failure to follow recommended operating and maintenance procedures also
voids warranty.
THERE ARE NO WARRANTIES
for which Alltrade makes no warranties whatsoever.
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
Warranty Performance
This limited warranty does not apply to accessory items such as drill bits,
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding
sheets and other related items.
By purchasing the product, purchaser expressly acknowledges and agrees that their
sole and exclusive remedy under this warranty shall be strictly limited to the repair
or replacement of any covered nonconforming items or parts thereof provided that
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS
WARRANTY.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE
REMEDY IS AS STATED ABOVE.
Limitation Of Liability
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY
PERIODS SPECIFIED ABOVE.
Alltrade will not be liable for the following: labor charges, loss or damage resulting
from improper operation, maintenance or repairs made by other persons;
pre-delivery services such as assembly, oil or lubricants, and adjustment;
maintenance services that are normally required to maintain the product.
The use of other than genuine Alltrade Repair Parts will void warranty.
Warranty Disclaimers
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
Limitations on Warranty Disclaimers
Some states do not allow limitations on how long an implied warranty lasts
and some states do not allow the exclusion or limitation of the incidental or
consequential damages, so part or all of the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
If your product is not covered by this warranty, please call our Customer Service
Department toll free at 1-800-590-3723 for general repair information and charges.
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|