Karcher Pressure Washer K 2200 G User Manual

Model K 2200 G  
Part No. 1.133-115.0  
High Pressure Washer Operator Manual  
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2  
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . .3  
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . .4  
Using the Accessories . . . . . . . . . . . . . . . . . . . . . . . . .5  
Working with Detergents . . . . . . . . . . . . . . . . . . . . . . .6  
Shut Down and Clean-Up . . . . . . . . . . . . . . . . . . . . . .7  
Taking a Break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Winterizing and Long-Term Storage . . . . . . . . . . . . . .7  
Cleaning Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9  
Optional Cleaning Accessories . . . . . . . . . . . . . . . . . .9  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .10-11  
Specifications  
Operating pressure 2200 PSI  
Water volume  
Engine  
2.0 GPM  
6.0 HP Briggs & Stratton Quantum  
( 800-537-4129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS – Read First!  
Water Supply  
(Cold Water Only)  
• Water hose must be at least 3/4 inch in  
diameter.  
• Flow rate of water supply must not fall  
below 2.5 GPM (gallons per minute).  
• Flow rate can be determined by running  
the water for one minute into an empty  
5-gallon container.  
Safety Warnings  
When using this product basic  
precautions should always be followed:  
• Read all the instructions before using the  
product.  
• FIRE HAZARD! Do not add fuel with the  
engine running. Do not operate if fuel has  
been spilled. Instead move the machine to  
a different location and avoid creating  
sparks.  
• The water supply temperature must not  
exceed 104°F/40°C.  
• Operate and fuel machine in a well venti-  
lated area, free of devices featuring an  
open pilot or flame such as boilers, water  
heaters, etc.  
• Never use the pressure washer to draw in  
water contaminated with solvents, e.g.  
paint thinners, gasoline, oil, etc.  
• Always prevent debris from being drawn  
into the unit by using a clean water  
source.  
• High pressure jets can be dangerous  
if subject to misuse. The jet must not  
be directed at persons, animals, electrical  
devices or the machine itself.  
We strongly recommend that this high  
pressure washer not be left running for  
periods of 5 minutes or longer without the  
trigger gun being engaged.  
• Wear safety goggles.  
• Do not use acids, solvents, or any other  
flammable material in this product. These  
products can cause physical injuries to  
the operator and irreversible damage to  
the machine. If you have further questions  
regarding the use of recommended  
cleaning detergent, please call Kärcher  
customer service at 800-537-4129.  
• The machine has hot surfaces which can  
cause burns. Operate the unit in a safe  
environment and away from children.  
• Do not allow the high pressure hose to  
come into contact with the muffler guard.  
• Do not leave the machine running  
unattended.  
This Kärcher high pressure washer is  
equipped with thermal protection to extend  
the life of your pressure washer. The thermal  
protector will automatically activate at a  
predetermined temperature ejecting hot  
water before resetting. This ensures that  
the pump does not become damaged.  
Caution  
Follow the maintenance instructions  
specified in the manual.  
• Learn how to stop the machine and  
release pressure quickly. Be thoroughly  
familiar with the controls.  
This machine has been designed for  
use with cleaning detergent supplied  
or recommended by the manufacturer.  
The use of other cleaning detergents  
may affect the operation of the  
• Stay alert — watch what you are doing.  
• Do not operate the product when fatigued  
or under the influence of alcohol or drugs.  
machine and void the warranty.  
• Do not stand on unstable surfaces. Stand  
with both feet balanced at all times.  
• The Gun Safety Lock PREVENTS the  
trigger from accidentally being engaged.  
This safety feature DOES NOT lock trigger  
in the on position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
Step1 Slide the handle through the  
accessory rack.  
Step2 Align the holes of the accessory  
rack to the handle and fasten the four  
screws.  
Step3 Insert the handle into the frame.  
Align holes, insert bolt, and tighten with  
knob.  
Step4 Insert the spray wand into the  
gun. Push in and turn clockwise to lock  
spray wand in place. Turn the wand collar  
clockwise onto the spray wand threads  
until tight.  
Step5 Attach high pressure hose to  
trigger gun.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
Step1  
Step2  
Fill gas tank with unleaded gasoline. Do not  
use leaded gasoline.  
Check oil level. Oil level should always be  
between the “FULLand “ADD” marks on the  
dipstick. Be sure the machine is level when  
checking the oil level. (Refer to the engine’s  
operating manual for seasonal grades.).  
Important! Do not run the engine with  
a high or low oil level as this can cause  
engine damage. If you have further  
questions regarding the engine, please  
refer to the engine’s operating manual  
included with the unit.  
Step3 Connect garden hose to unit’s  
water inlet.  
Step4 Connect high pressure hose to  
high pressure outlet.  
Step5 Connect garden hose to the cold  
water source and turn water on completely.  
Step6 Trigger the gun to  
eliminate trapped air, wait for a steady flow  
of water to emerge from the spray nozzle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS - continued  
Step8 Pull the starter  
handle. If the engine fails to  
start after 3 pulls squeeze  
the trigger gun to release  
pressure, and repeat step 8.  
Step7 Slide the throttle control to the fast position.  
Move the ckoke lever to the “CHOKE” position (only if the  
engine is cool). After starting, move the choke to “RUN”.  
USING THE ACCESSORIES  
Spray wand  
The spray wand allows you to adjust the cleaning pressure. To clean at maximum pressure,  
the wand must be positioned to the high pressure setting (+). To apply detergent, the wand  
must be positioned to the low pressure setting (-).  
For high pressure turn  
wand collar in the plus  
(+) direction.  
For low pressure turn  
wand collar in the  
minus (-) direction.  
WARNING TO AVOID SERIOUS INJURY, NEVER POINT SPRAY NOZZLE AT  
YOURSELF, OTHER PERSONS OR ANIMALS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WORKING WITH DETERGENT  
Detergents can only be applied in the “low” setting.  
Step2 The wand must be set in the low  
pressure (-) position to apply detergents.  
Step1 Slide the detergent tray into one of  
the slots of your choice. Secure the tray to  
the frame by fastening the screw.  
Step4 With the engine running, pull  
trigger to operate unit: Liquid detergent is  
drawn into the unit and mixed with water.  
Apply detergent to work area. Do not allow  
detergent to dry on surface.  
Step3 Fill a container with Kärcher  
detergent. Place the filter end of detergent  
suction tube into the container. Be sure to  
adjust the filter by turning it to the desired  
detergent intake.  
Always Use Karcher  
For best results see Cleaning Tips  
on pages 8 & 9 for specific  
information on how to clean  
different surfaces.  
Detergents for Best Results.  
Kärcher biodegradable detergents are  
specially formulated to protect the  
environment and your pressure washer.  
Special formula won’t clog the suction tube  
filter and will protect the internal parts of the  
pressure washer for a longer life.  
For Karcher Detergents, check your  
retailer or call:  
Caution  
Never use:  
• Bleach, Chlorine products and other  
corrosive chemicals  
• Liquids containing solvents  
(i.e., paint thinners, gasoline, oils)  
Tri-sodium phosphate products  
• Ammonia products  
• Acid-based products  
These chemicals will harm the unit and  
will damage the surface being cleaned.  
1-800-537-4129  
The following Kärcher detergents are  
available:  
• Vehicle Wash  
• House Wash  
• Deck Wash  
• Degreaser  
• All Purpose Cleaner  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHUTTING DOWN & CLEAN-UP  
Step1 Remove  
Step4  
Press trigger to  
release water  
pressure.  
Step3  
Turn off the water  
source.  
Step2  
Turn off the engine.  
detergent suction tube  
from container and  
insert into one gallon of  
fresh water. Siphon  
water at low pressure  
for one minute.  
Step5 Disconnect the  
garden hose from the  
water inlet on the unit.  
Step6 Disconnect the high pressure hose from the  
high pressure outlet and engage the gun safety lock.  
TAKING A BREAK... five minutes or more  
Step3 Engage gun  
safety lock.  
Step1 Turn off the  
engine.  
Step2 Press trigger to  
release water pressure.  
WINTERIZING AND LONG-TERM STORAGE  
1. Disconnect all water connections.  
2. Start the machine for a few seconds, until  
the water which had remained in the pump  
exits. Turn off immediately.  
3. Drain the gas and oil from the engine.  
4. Do not allow high pressure hose to  
become kinked.  
5. Store the machine and accessories in  
a room which does not reach freezing  
temperatures. The machine should not be  
placed near an open flame i.e. furnace,  
hot water heater etc.  
Caution: Failure to follow the above  
directions will result in damage to the  
pump assembly and accessories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING TIPS  
Cement Patios,  
Deck Cleaning  
(with or without detergent)  
Brick and Stone  
Pre-rinse deck and surrounding area with  
fresh water. If using Kärcher Deck Wash,  
place detergent suction tube directly into  
cleaning solution and apply to surface at low  
pressure. For best results, limit your work  
area to smaller sections of approximately  
25 square feet. Allow Kärcher Deck Wash to  
remain on surface 1-3 minutes. Do not allow  
detergent to dry on surface. Rinse at high  
pressure in a long sweeping motion keeping  
the spray nozzle approximately 3-6 inches  
from the cleaning surface. Always clean  
from top to bottom and from left to right.  
When moving on to a new section of the  
cleaning surface, be sure to overlap the  
previous section to eliminate stop marks  
and ensure a more even cleaning result.  
Caution: Do not use rotating nozzle spray  
wand on wood surface as it may cause  
damage.  
(with or without detergent)  
Pre-rinse cleaning surface with fresh water.  
If using Kärcher All Purpose Cleaner, place  
detergent suction tube directly into cleaning  
solution and apply to surface at low  
pressure. For best results, limit your work  
area to smaller sections of approximately  
25 square feet. Allow Kärcher All Purpose  
Cleaner to remain on surface 1-3 minutes.  
Do not allow detergent to dry on surface.  
Rinse at high pressure in a sweeping  
motion keeping the spray nozzle  
approximately 3-6 inches from the cleaning  
surface. Always clean from top to bottom  
and from left to right. For removing  
extremely stubborn stains, use Kärcher  
Rotating Nozzle Spray Wand.  
Cars, Boats & Motorcycles  
(with or without detergent)  
Pre-rinse vehicle with fresh water. If using  
Kärcher Vehicle Wash, place detergent  
suction tube directly into cleaning solution  
and apply to surface at low pressure. For  
best results, clean one side of vehicle at a  
time and always apply detergent from  
bottom to top, do not allow detergent to dry  
on surface. If needed, use special Wash  
Brush Attachment to remove stubborn dirt.  
Rinse at high pressure in a sweeping  
motion keeping the spray nozzle  
approximately 6-8 inches from the cleaning  
surface (distance should increase when  
rinsing pin-striping or other sensitive  
surfaces). Always clean from top to bottom  
and from left to right. For best results, wipe  
surface dry with a chamois or soft dry cloth.  
Caution: Do not use rotating nozzle spray  
wand on vehicles as it may cause damage.  
House Siding  
(with or without detergent)  
Pre-rinse cleaning surface with fresh water.  
If using Kärcher House Wash, place  
detergent suction tube directly into cleaning  
solution and apply to surface at low  
pressure (for best results, limit your work  
area to sections of approximately 6 feet and  
always apply detergent from bottom to top).  
Allow Kärcher House Wash to remain on  
surface 1-3 minutes. Do not allow detergent  
to dry on surface, if surface appears to be  
drying, simply wet down surface with fresh  
water. If needed, use special Wash Brush  
Attachment to remove stubborn dirt. Rinse  
at high pressure from top to bottom in an  
even sweeping motion keeping the spray  
nozzle approximately 6 inches from the  
cleaning surface.  
Caution: Do not use rotating nozzle spray  
wand on siding as it may cause damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- continued  
CLEANING TIPS  
Barbecue Grills, Outdoor  
Power Equipment &  
Patio & Lawn Furniture  
(with or without detergent)  
Pre-rinse furniture and surrounding area with  
fresh water. If using Kärcher All Purpose  
Cleaner, place detergent suction tube  
directly into cleaning solution and apply to  
surface at low pressure. Allow Kärcher All  
Purpose Cleaner to remain on surface 1-3  
minutes. Do not allow detergent to dry on  
surface. If needed use special Wash Brush  
Attachment to remove stubborn dirt. Rinse at  
high pressure in a sweeping motion keeping  
the spray nozzle approximately 3-6 inches  
from the cleaning surface. For best results,  
clean from top to bottom and from left to  
right. Caution: Do not use rotating nozzle  
spray wand on patio or lawn furniture as it  
may cause damage.  
Gardening Tools  
(with or without detergent)  
Pre-rinse cleaning surface with fresh water.  
If using Kärcher All Purpose Cleaner or  
Degreaser, place detergent suction tube  
directly into cleaning solution and apply  
detergent at low pressure. Allow Kärcher  
detergent to remain on surface 1-3 minutes.  
Do not allow detergent to dry on surface.  
Rinse at high pressure keeping the spray  
nozzle approximately 3-6 inches from the  
cleaning surface. For removing extremely  
stubborn dirt, it may be necessary to move  
the spray nozzle even closer to the surface  
for greater dirt cutting action. To remove  
caked on mud from garbage cans, lawn  
mower blades, wheel barrels or other  
non-sensitive metal surfaces, you may  
want to use the Karcher Rotating Nozzle  
Spray Wand.  
Recommendations  
• Before cleaning any surface an  
inconspicuous area should be cleaned  
to test spray pattern and distance for  
maximum cleaning results.  
Caution: Do not use rotating nozzle spray  
wand on cloth, plastic or other sensitive  
surfaces as it may cause damage.  
• If painted surfaces are pealing or chipping,  
use extreme caution as pressure washer  
may remove the loose paint from the  
surface.  
OPTIONAL CLEANING ACCESSORIES  
Optional cleaning accessories are available to further enhance your cleaning capabilities:  
See accessories order form for product descriptions and ordering instructions.  
• Rotating Wash Brush  
• Wash Brush  
• Pipe Drain Cleaner  
• Floor Washing Tool  
• House Washing Wand  
• Extension Wand  
• Sandblasting Attachment  
• Detergent Foamer Attachment  
• Water Pumping Kit  
• Rotating Spray Wand  
• Flexible Spray Wand  
• Underbody Spray Wand  
Telescopic Spray Wand  
• Water Suction Hose  
• Extension Hose 25’  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Symptom  
Cause  
Solution  
Engine will not start  
No gasoline.  
Low oil level.  
Fill gas tank.  
Add oil.  
Slide choke lever to “CHOKE”  
position.  
Choke is not in correct  
position.  
Position the throttle to “FAST.  
Engine throttle is not in  
correct position.  
For additional  
engine problems  
refer to the engine  
owners manual.  
Pressure built up in the  
high pressure washer.  
Squeeze the trigger to release the  
pressure.  
Unit does not reach  
high pressure.  
Diameter of garden hose  
is too small.  
Replace with a 3/4 inch garden  
hose.  
Water supply is restricted.  
Check garden hose for kinks, leaks  
and blockage.  
Not enough inlet water supply. Open water source full force.  
Water inlet filter is clogged. Remove filter and rinse out in warm  
water.  
Spray wand is in low  
pressure position.  
Turn spray wand tip to high  
pressure position.  
Turn water on full force. Check garden  
hose for kinks, leaks or blockage.  
Output pressure  
varies high and low.  
Not enough inlet water sup-  
ply.  
Pump is sucking air.  
Check that hoses and fittings are air  
tight. Turn off machine and purge  
pump by squeezing trigger gun until  
a steady flow of water emerges  
through the nozzle.  
Water inlet filter is clogged. Remove filter and rinse out in warm  
water.  
Discharge nozzle is  
obstructed.  
Blow out or remove debris with a  
fine needle.  
Calcified gun, hose or  
spray wand.  
Run distilled vinegar through  
detergent suction tube.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- continued  
TROUBLESHOOTING  
Symptom  
Cause  
Solution  
No detergent.  
Detergent suction tube not  
properly connected to the  
machine.  
Check connection.  
Dilute detergent, for best results  
use Kärcher detergent.  
Detergent is too thick.  
Open the filter by turning it to the  
desired detergent intake.  
The filter is closed.  
Filter on detergent suction  
tube is clogged.  
Run warm water through filter to  
remove debris.  
Damaged or clogged  
detergent suction tube.  
Remove obstruction or replace  
detergent suction tube.  
Spray wand is in high  
pressure position.  
Turn spray wand tip to low pressure  
position.  
Discharge nozzle is  
obstructed.  
Blow out or remove debris with a  
fine needle.  
Loose fittings.  
Tighten fittings.  
Garden hose  
connection leaks.  
Missing/worn rubber washer. Insert new washer.  
Insert the spray wand into the spray  
Spray wand not properly  
attached.  
Spray wand or Spray  
extension wand  
leaks.  
wand extension. Carefully press in  
against the spring tension and twist  
into the locked position.  
Slide the spray wand extension into  
the gun. Turn the wand collar clock-  
wise onto the gun threads until tight.  
Spray wand extension not  
properly attached.  
Call Kärcher customer service  
hotline and order repair kit  
(part no. 2.883-111.0).  
Broken o-ring or plastic  
insert.  
Pump is noisy.  
Pump is sucking air.  
Check that hoses and fittings are air  
tight. Turn off machine and purge  
pump by squeezing trigger gun until  
a steady flow of water emerges  
through the nozzle.  
Loose fittings.  
Check that all fittings are tight.  
Water leaks from  
pump (up to 10 drops  
per minute  
Thermal protection device  
has been activated.  
Thermal protection device will  
automatically reset.  
is permissible).  
Water seals are damaged  
or worn.  
Call service center.  
Call service center.  
Oil Drip.  
Oil seals are damaged or  
worn.  
If you encounter any additional  
difficulties not listed, please call  
our service center for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Car Satellite TV System NS 48D420NA16 User Manual
Invacare Mobility Aid TRHD22HR User Manual
JBL Stereo Receiver AVR 140 User Manual
JVC Car Stereo System KD AHD65 User Manual
JVC Projector Model 200 User Manual
Kenmore Washer 134190400 0209 User Manual
Kenwood Car Stereo System KAC 7201 User Manual
Kenwood Rice Cooker RC400 User Manual
Kenwood Speaker KFC 1372 User Manual
Kompernass Automobile Accessories KH 4061 User Manual