Kambrook - Australia
Kambrook - New Zealand
Building 2, Port Air Industrial Estate
1A Hale Street
Private Bag 94411
Botany, Manukau
Botany NSW 2019
Auckland 2163
Australia
New Zealand
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
Dual Heat
Advantage
Instruction Booklet
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue D12
KRH300
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not operate the dual heater with the power
cord damaged, frayed or split, wound around
any part of the dual heater or in contact with the
heated surfaces of the dual heater
•
Do not place the dual heater near the edge of
a bench or table during operation. Ensure that
the surface is level, clean and free of water and
other substances.
Kambrook Recommends Safety First
Do not operate any heater with a damaged
cord or plug, or if heater has been dropped or
damaged in any manner. Return heater to your
nearest service centre for examination, electrical
or mechanical adjustment or repair.
•
•
Keep the dual heater clean. Follow the cleaning
instructions provided in this book.
Always ensure the dual heater is properly
assembled before use. Follow the instructions
provided in this book.
IMPORTANT: Please retain your
instruction book for future use.
•
•
Do not run the cord under carpeting or cover the
cord with rugs, runner or the like.Arrange the cord
away from traffic areas and where it will not be
tripped over.
•
•
•
•
Do not use the dual heater without the
wheels fitted.
Do not leave the dual heater unattended
when in use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customers can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Do not insert or allow foreign objects to pass
through the inlet and outlet openings.This may
cause an electric shock, fire or damage to the
dual heater.
Do not operate the dual heater on a sink
drain board.
Do not allow materials that have been in contact
with oil, petroleum based products or drying fluids
to come in contact with the heater.
•
•
Do not touch hot surfaces.
Use this dual heater only as described in
•
•
Do not operate the dual heater on an incline
plane. Do not move while the dual heater is
switched on.
this instructions manual.Any other use not
recommended by the manufacturer may cause
fire, electric shock or injury and voids all warranties.
Important Safeguards For Your Kambrook
Dual Heater
To avoid an electrical overload, it is
recommended that no other appliances are
plugged into the same circuit as your dual
heater when it is in use.
•
To eliminate a choking hazard for young children,
remove and safely discard the protective cover
fitted to the power plug of this dual heater.
•
Carefully read all instructions before operating the
dual heater and save for future reference.
IMPORTANT: Never
•
Remove any packaging material and
promotional stickers before using the dual
heater for the first time.
operate the radiant
heater without the front
grill securely in position.
•
Avoid touching the dual heater body while it is on
as some parts of the heater are hot.When moving
the unit switch off and hold the dual heater by the
handles where provided.
Important Safeguards For All
Electrical Appliances
•
Extreme caution and supervision is necessary
when this dual heater is used by or near children,
invalids or animals.
•
•
Always keep combustible materials such as
drapes and other furnishing at least 1.7 meters
away from the front sides and of the dual heater.
•
Carefully read all instructions before operating
the appliance and save for future reference.
•
Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
•
•
•
This dual heater is intended for floor use only.
Do not mount on ceiling or walls.
•
Remove and safely discard all packaging
material and promotional labels before using the
appliance for the first time.
To prevent a possible fire or heat damage, allow
ample space around the dual heater (at least
1.7m from the front, 1.0m at the top and 0.5m
at the rear and sides of the dual heater when
it is intended for floor use) and do not totally or
partially covered the dual heater in any manner.
Check the unit’s openings from time to time for
accumulated dust.
•
This appliance is for household use only. Do not use
this appliance for other than its intended use. Do
not use in moving vehicles or boats.
Do not leave the dual heater unattended.Always
switch off the dual heater at the controls and at
the power outlet then unplug from the power
outlet when not in use.
•
•
•
Fully unwind the power cord before use.
Connect only to 230V or 240V power outlet.
Do not use outdoors. Misuse may cause injury.
•
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using electrical
appliances. It is advisable that a safety switch
with a rated residual operating current not
exceeding 30mA be installed in the electrical
circuit supplying the appliance. See your
electrician for professional advice
Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
•
•
•
Do not use the dual heater to dry your laundry.
Do not operate the dual heater whilst asleep.
•
Do not cover the dual heater whilst it is operating.
Do not use outdoors.This dual heater is
not intended for commercial use such as
construction sites.
•
•
To protect against electric shock, do not immerse
the power cord, power plug or appliance in water
or any other liquid, unless it is recommended in the
cleaning instructions.
•
•
Do not locate the dual heater immediately below
and in front of a socket outlet when in use.
IMPORTANT: In order to
avoid overheating, do
not cover the dual heater.
•
•
Always turn the appliance to the OFF position,
switch off at the power outlet and unplug at the
power outlet when the appliance is not in use.
The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance, by a person responsible for their safety.
Do not use this dual heater with an external
programmer, timer, or any other devices that
switches the dual heater automatically, since a
fire risk may exist if the dual heater is covered or
positioned incorrectly.
Before cleaning, always turn the appliance to the
OFF position, switch off at the power outlet, unplug
at the power outlet and remove the power cord,
if detachable, from the appliance and allow all
parts to cool.
•
•
Children should be supervised to ensure that they
do not play with the appliance.
•
•
•
This dual heater is not intended for use in wet and
moist locations. Do not immerse or allow liquids to
be spilt on the dual heater.
WARNING: Fire risk exists
if the heater is covered
by or positioned close
to curtains or other
•
•
Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
It is recommended to inspect the appliance
regularly. Do not use the appliance if the power
supply cord, plug, connector or appliance
becomes damaged in anyway. Return the entire
appliance to the nearest authorised Kambrook
Service Centre for examination and/or repair.
Do not use this dual heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
Position the appliance at a minimum distance
of 20cm away from walls, curtains and other
heat or steam sensitive materials and provide
adequate space above and on all sides for
air circulation.
This dual heater has hot and arcing or sparking
parts inside. Do not use in areas where petrol,
paints, aerosols, or other inflammable substances
are used or stored.
combustible materials.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Kambrook Dual Heater
Quick Start Guide
1. Convection heat panels
5. Power indicator light
Setting the
heating
from top
6. Cool touch recessed
2. Radiant heat from front grill
carry handles
Turning the
heater on
Turning the
heater off
mode and
variable
3. Variable thermostat control
(when set to heat setting 3
or 4 only)
7. Safety tip-over cut-out switch
8. High efficiency quartz elements
9. Large castor wheels for mobility
temperature
THERMOSTAT
4. On/Off and heat setting control
THERMOSTAT
MODE
MODE
NOT SHOWN
3
3
•
ThermoGuard
over-heat protection
MODE
3
Ensure heater
is set to 0 for
OFF position
and Variable
Plug the cord
into a 230V or
240V power
point and
Turn the Heat
Setting dial
to the highest
setting.
Once a
Turn the heater
off by turning
comfortable
room
the Heat Setting
temperature has dial to the 0
been reached, position.
Thermostat dial switch on.
clockwise as far
(note: Variable
Temperature will slowly turn
as it will go
only work if set
to heat setting
3 or 4)
the Variable
Temperature
dial anti-
clockwise until
a click sound is
heard.
• Fit window coverings like curtains to
halve winter heat loss
• Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air
• Keep the heat in and the cold
out by installing wall and ceiling
insulation
• Avoid placing items too close to the
heater (both at the front and back)
for optimal air flow
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home.The
temperature of a heated room in
winter should be 18-21°C
• Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces
• Choose the right size heater for the
room type you want to heat
• Zone off unoccupied rooms by
closing doors and only heat the
main living areas
Australia Patent No.784851/NZ Patent No.515623
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Kambrook Dual Heater
7. Plug the power cord into a
Before First Use
Setting the Heating Mode
and Variable Temperature
230-240 volt outlet, the red
NOTE: This heater features a
tipover switch. If the heater
tips over, the quartz heating
elements will automatically
switch off. The power indicator
light remains on. Once placed
back into the upright position,
the quartz heating element will
automatically switch on again.
1. Remove your heater from its
carton and associated protective
wrapping, and unwind the cord
to its full length and remove any
protective cardboard or foam
that may have been used to
indicator light will illuminate when
the power outlet is switched on.
8. Turn the Heat Control dial on the
side of the heater from 0 (Off) to
the desired heat setting.
To control the heater, turn the Heat
Setting dial and Variable Thermostat
dial as follows.
The Heat Setting dial has 5 modes:
0 - Shuts off the heater
1 - Low (600 watts)
2 - Med (1200 watts)
3 - Med-High (1800 watts)
4 - High (2400 watts)
The Variable Thermostat dial acts
as an automatic thermostat and
can be used to maintain your desired
temperature.
Turn the Heat Setting dial to setting 4
and the Variable Temperature dial to
‘MAX’ setting. Once a comfortable
room temperature has been reached,
slowly turn the Variable Temperature
dial anti-clockwise until a click sound
is heard.
minimize transportation damage.
2. Read and follow the complete
instructions before plugging the
unit into the 230-240 volt supply.
IMPORTANT: Do not
use the unit without the
wheels fitted
3. Remove the castors from their
storage position on the base and
following the directions in point
8, fit the castors so that they are
positioned on the outer-most
securing holes on the base of the
heater.The heater must never
be operated without the castors
secured in the correct position.
4. Place the heater on a level
surface in a stable position.
Make certain the heater
element control switch is in the
OFF position.
ThermoGuard Overheating
Safety Device
IMPORTANT: Never
operate the heater
without the front grill
securely in position.
Your heater is fitted with a safety
device that switches off the lower
three quartz heating elements in the
event of overheating. Should this
happens, turn off the heater and
inspect the air inlet and outlet for
blockages.Wait at least five minutes
for the over-heat protection system
to reset before attempting to restart
the heater.
Turning Your Heater On
This heater has 4 heat settings.
Ensure the Heat Setting dial is turned
to 0 for the OFF position and Variable
Thermostat dial to ‘MAX’.
Plug the cord into a 230V or 240V
power point and switch on.
NOTE: The Variable Thermostat
control will only operate if the
heat setting is set to heat setting
3 or 4.
5. Ensure that wheels are mounted
before use.
6. Inside your box you will find two
(2) sets of caster wheels and four
(4) wing screws.To fit wheels to
heater, please turn heater up side
down on an even surface.Align
the two sets of the caster wheels
to the holes on the bottom of the
heater. Screw in the 4 wing screws
and tighten by hand.Turn the
heater over and use it on a stable
and flat surface.
If the heater fails to operate or the
safety device switches off the lower
three quartz heating elements again,
return the heater to your nearest
Kambrook Service Centre
At this setting your heater will
automatically cycle on and off
to maintain the desired room
temperature
Turn the heater off by turning the Heat
Setting dial to 0 position.
The Heat Indicator Light will illuminate
when the heater is turned to any Heat
Setting from 1 to 4. It will turn off when
set to 0.
for examination or repair.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Notes
•
Always turn off the heater at
the main controls and then
switch off at power outlet before
unplugging the heater prior
to cleaning.
•
Use only a clean, dry cloth to
clean the external surfaces of
the heater.
•
•
Do not attempt to remove the
front grill of the heater.
If the unit has accumulated dust
around the elements and grill
that cannot be removed, have a
qualified service agent clean the
unit. DO NOT operate the heater
in this condition.
•
•
Do not attempt to open the case
of the heater at anytime, there
are no customer serviceable
parts inside.
When not in use, pack the
heater in its original box for best
protection and store in a cool,
clean and dry location.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|