Kambrook - Australia
Kambrook - New Zealand
Building 2, Port Air Industrial Estate
1A Hale Street
Private Bag 94411
Botany, Manukau
Botany NSW 2019
Auckland 2163
Australia
New Zealand
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
Upright
Fan Heater
Instruction Booklet
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue A11
KFH200
Download from Www.Somanuals.com. All Manuals Search And Download.
• To disconnect heater turn the control switch to
OFF.Turn off at the power outlet then remove
the plug from its outlet.
• Regularly inspect the supply cord,plug,control
settings,air inlets and outlets and main housing
for any damage in any way.Immediately cease
use of the heater and return to Kambrook or an
authorised service agent for inspection or repair.
Kambrook Recommends Safety First
• Do not insert or allow foreign objects to pass
through the inlet or outlet openings.This may
cause an electric shock, fire or damage
the heater.
• Do not locate heater immediately below and
in front of a socket outlet when in use.
• To prevent a possible fire or heat damage,
allow ample space around the heater (1.7m
at front and 0.5m at the rear, top and sides)
and do not totally or partially block the air inlet
or outlets in any manner. Check the openings
from time to time for accumulated dust.
• To avoid an electrical overload, it is
recommended that no other appliances are
plugged into the same circuit as your fan
heater, when it is in use.
IMPORTANT: Please retain your
instruction book for future use.
• Do not leave the fan heater unattended when
in use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
• Do not touch hot surfaces.
•
Do not operate the heater on an incline plane.
Do not move while the fan heater is switched on.
• Switch off at the control switch and power
outlet, then unplug and allow heater to cool
down before cleaning or storing.
• Always keep the heater clean. Follow the
cleaning instructions provided in this book.
• Use this heater only as described in this
instruction manual.Any other use not
recommended by the manufacturer may
cause fire electric shock or injury and voids
all warranties.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this heater.
Important Safeguards For Your Kambrook
Upright Fan Heater
Important Safeguards For All Electrical
Appliances
• Carefully read all instructions before operating
the Fan Heater and save for future reference.
for examination, electrical or mechanical
adjustment or repair.
• Remove and safely discard all packaging
material and promotional labels before using
the appliance for the first time.
• This appliance is for household use only. Do not
• Avoid touching heater body while it is on,
some parts of the heater are hot.When
moving the heater switch off and hold the
heater by the handles where provided.
• Do not use outdoors.This heater is not
intended for commercial use, such as
construction sites.
use this appliance for other than its intended
use. Do not use in moving vehicles or boats.
Do not use outdoors. Misuse may cause injury.
• Connect only to 230V or 240V power outlet.
• Fully unwind the power cord before use.
• Do not use this heater with an external
programmer,timer or any other device that
switches the heater on automatically since
a fire risk may exist if the heater is covered or
positioned incorrectly.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice
• Keep combustible materials such as drapes
and other furnishings at least 1.7 metres from
the front, sides and rear of the heater. Do not
use heater to dry your laundry.
• Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
• This heater is not intended for use in wet or
moist locations. Do not use this heater in the
immediate surroundings of a bath, a shower
or a swimming pool. Do not immerse or allow
liquids to be spilt on heater.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid, unless it
is recommended in the cleaning instructions.
WARNING: In order to
avoid overheating, do
not cover the heater.
• Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance, by a person
responsible for their safety.
• This heater has hot and arcing or sparking
parts inside. Do not use in areas where
petrol, paints, aerosols, or other inflammable
substances are used or stored.
• Before cleaning, always turn the appliance to
the OFF position, switch off at the power outlet,
unplug at the power outlet and remove the
power cord, if detachable, from the appliance
and allow all parts to cool.
• Extreme caution and supervision is necessary
when this heater is used by or near children,
invalids or animals.
• Do not operate the heater with the power
cord damaged, frayed or split, wound around
any part of the heater, or in contact with
heated surfaces of the heater.
• Important – this heater is intended for floor
use only.
• Children should be supervised to ensure that
they do not play with the appliance.
• Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
• Do not mount on ceiling or walls.
• Do not allow materials that have been in
contact with oil, petroleum based products
or drying fluids to come in contact with
the heater.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in anyway.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
• Do not leave heater unattended.Always
switch off the heater at the controls and at
the power outlet then unplug heater from the
power outlet when not in use.
• Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.
• Do not run the cord under carpeting or cover
the cord with rugs, runners or the like.Arrange
cord away from traffic areas and where it will
not be tripped over.
• Do not operate heater whilst asleep.
• Do not operate any heater with a damaged
cord or plug, or if heater has been dropped
or damaged in any manner. Return heater
to your nearest Kambrook Service Centre
• Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Kambrook Upright Fan Heater
Quick Start Guide
1. 2400 watt heating element
Not Shown
Safety tip-over cut-out switch
ThermoGuard protection for
peace of mind
Setting
Turning the
heater off
Turning the
heater on
2. Convenient carry handle
•
•
the heat
(at back)
temperature
3. 2 heat settings, plus fan
only setting
Ensure heater is
set to ‘0’ for OFF
position.
Plug the cord
Turn the Heat
Setting dial to
setting ‘I’ for half
heat or ‘II’ for
maximum heat
Turn the heater off
by turning the Heat
Setting dial to ‘0’ for
OFF position.
into a 230V or
240V power
point and
switch on.
• Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air
• Keep the heat in and the cold
out by installing wall and ceiling
insulation
• Avoid placing items too close to the
heater (both at the front and back)
for optimal air flow
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home.The
temperature of a heated room in
winter should be 18-21°C
• Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces
• Choose the right size heater for the
room type you want to heat
• Zone off unoccupied rooms by
closing doors and only heat the
main living areas
• Fit window coverings like curtains to
halve winter heat loss
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Upright Fan Heater
Before First Use
ThermoGuard Overheating
Safety Device
NOTE: To avoid an electrical
Remove any promotional material
and packaging from the heater.
circuit overload, it is
recommended that no other
appliances are plugged into
the same circuit as your heater,
when it is in use.
Unwind the cord to its full length
and place the heater on a firm, level
surface in a stable, upright position.
Visually inspect the air inlet and outlets
to ensure there are no blockages.
Your heater is fitted with a safety
device that switches off the heater
in the event of overheating. Should
this heater stop working, turn off the
heater and inspect the air inlet and
outlet for blockages.Wait at least five
minutes for the protection system to
reset before attempting to restart
the heater.
If the heater fails to operate or the
safety device switches off again,
return the heater to your nearest
Kambrook service centre for
examination or repair.
Setting the Heating Mode
To control the heater, turn the Heat
Setting dial as follows.
The Heat Setting dial has 4 modes:
O - Shuts off the heater and fan
- For fan only operation
I - Low heat setting (1200 watts)
II - High heat setting (2400 watts)
Turn the heater off by turning the
Heat Setting dial to the ‘0’ position.
Turning Your Heater On
Ensure the Heat Setting dial is turned
to ‘0’ for OFF position.
NOTE: This heater features a
tip-over switch. If the heater tips
over, it will automatically switch
off. Once placed back into the
upright position, the heater will
automatically switch on again.
Plug the cord into a 230V or 240V
power point and switch on.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Notes
Ensure that the heater is switched off
and disconnected from the power
point before cleaning.
Use a clean, dry cloth to clean the
external surfaces of the heater. If
the heater has collected dust or dirt
inside the unit or around the elements,
have the unit cleaned by a qualified
service agent. Do not operate the
heater in this condition.
Do not attempt to open the case of
the heater at any time as there are no
customer serviceable parts inside.
When not in use, store the heater
(preferably in its original box) in a cool,
clean and dry location.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|