Kambrook Fan KFA423 User Manual

Kambrook - Australia  
Kambrook - New Zealand  
Building 2, Port Air Industrial Estate  
1A Hale Street  
Private Bag 94411  
Botany, Manukau  
Botany NSW 2019  
Auckland 2163  
Australia  
New Zealand  
Customer Service Line 1300 139 798  
Customer Service Fax 1800 621 337  
Customer Service Line/  
Spare Parts 0800 273 845  
Customer Service Fax 0800 288 513  
Due to continual improvement in design or otherwise, the product you  
purchase may differ slightly from the illustration in this book. Issue A12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important  
Please retain your instruction  
book for future use.  
In the event that you need some assistance with your  
Kambrook appliance, please contact our Customer Service  
Department on 1300 139 798 (Australia) or 0800 273 845  
(New Zealand). Alternatively, visit us on our website at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Kambrook Recommends  
Safety First  
p4  
p6  
p7  
p9  
Your Kambrook Arctic HV  
Pedestal Fan  
Using Your Kambrook  
Pedestal Fan  
Care and Maintenance  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Kambrook Recommends Safety First  
IMPORTANT: Please retain your  
instruction book for future use.  
At Kambrook, we believe that safe performance is the first priority in any  
consumer product, so that you, our valued customer can confidently  
use and trust our products. We ask that any electrical appliance that  
you use be operated in a sensible fashion with due care and attention  
placed on the following important operating instructions.  
Important Safeguards For Your Kambrook  
Arctic HV Pedestal Fan  
• Carefully read all instructions before operating  
the Kambrook Pedestal Fan for the first time  
and save for future reference.  
• Never carry the fan by the cord or yank  
to disconnect from an outlet; instead grasp  
the cord at the plug and pull to disconnect.  
Do not pull the cord around sharp edges  
or corners.  
• Remove and safely discard any packaging  
material and promotional labels before  
using the fan for the first time.  
• The fan must not be used if the grilles are  
not fastened correctly and the pedestal  
stand and base correctly fitted as per  
the instructions provided in this book.  
• To eliminate a choking hazard for young  
children, remove and safely discard the  
protective cover fitted to the power plug  
of this fan.  
• When unpacking the fan, check to see  
you have received all the items listed in the  
parts list before discarding the packaging.  
• Ensure that the surface is level, clean  
and free of water and other substances.  
• To avoid electrical circuit overload, it is  
recommended that no other appliances  
are plugged into the same circuit as your  
fan when it is in use.  
• Always ensure the fan is properly assembled  
before use. Follow the instructions provided  
in this book.  
• Keep the fan clean. Follow the cleaning  
instructions provided in this book.  
Disconnect the power plug before dismantling,  
assembling or before cleaning and when the  
fan is not in use.  
• Do not leave the fan unattended when in use.  
• Do not place anything, on top of the fan when  
assembled, when in use and when stored.  
• This fan is not intended for commercial  
or industrial use.  
• Avoid touching mobile parts of the fan.  
• Never insert fingers, pencils or any other  
objects through the guards whenever the  
power plug is connected, in particular  
while the fan is switched on.  
• Do not operate in the presence of explosives  
and/or flammable fumes or liquids.  
• Do not unplug the fan by pulling on the cord.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safeguards For All  
Electrical Appliances  
• Fully unwind the power cord before use.  
• This appliance is for household use only.  
Do not use this appliance for other than  
its intended use. Do not use in moving  
vehicles or boats. Do not use outdoors.  
Misuse may cause injury.  
• Connect only to a 230V or 240V power outlet.  
• Do not let the power cord hang over the  
edge of a bench or table, touch hot  
surfaces or become knotted.  
• The installation of a residual current device  
(safety switch) is recommended to provide  
additional safety protection when using  
electrical appliances. It is advisable that a  
safety switch with a rated residual operating  
current not exceeding 30mA be installed in  
the electrical circuit supplying the appliance.  
See your electrician for professional advice  
• To protect against electric shock, do  
not immerse the power cord, power  
plug or appliance in water or any other  
liquid, unless it is recommended in the  
cleaning instructions.  
• The appliance is not intended for use by  
persons (including children) with reduced  
physical, sensory or mental capabilities,  
or lack of experience and knowledge,  
unless they have been given supervision or  
instruction concerning use of the appliance,  
by a person responsible for their safety.  
• Always turn the appliance to the OFF  
position, switch off at the power outlet  
and unplug at the power outlet when the  
appliance is not in use.  
• Before cleaning, always turn the appliance  
to the OFF position, switch off at the power  
outlet, unplug at the power outlet and  
• Children should be supervised to ensure that  
they do not play with the appliance.  
remove the power cord, if detachable, from  
the appliance and allow all parts to cool.  
• It is recommended to inspect the appliance  
regularly. Do not use the appliance if the  
power supply cord, plug, connector or  
appliance becomes damaged in anyway.  
Return the entire appliance to the nearest  
authorised Kambrook Service Centre for  
examination and/or repair.  
• Do not place this appliance on or near  
a heat source, such as hot plate, oven  
or heaters.  
• Position the appliance at a minimum  
distance of 20cm away from walls, curtains  
and other heat or steam sensitive materials  
and provide adequate space above and  
on all sides for air circulation.  
• Any maintenance other than cleaning  
should be performed at an authorized  
Kambrook Service Centre.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your Kambrook Arctic HV Pedestal Fan  
Parts List  
1. Fan head  
7. Base  
8. Tilt adjustment knobs (2)  
9. Fan Head Screws  
10. Height adjustment knob  
11. Inner extension tube  
12. Outer extension tube  
13. Fixing Tube  
1. Fan head with metal front/back  
grilles, metal fan blades, and tilt  
adjustment knobs  
2. Fan blade size: 40cm  
3. Manually adjustable head moves  
up and down or left and right  
4. Height adjustable pedestal  
extension with knob  
5. Dial controller with 3 speed settings  
6. Carry handle for portability  
14. Stability plate  
(not shown)  
15. Washer  
16. Locking screw  
7. Solid, anti-topple base for stability  
HIGH  
MED  
LOW  
OFF  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Kambrook Pedestal Fan  
Before First Use  
Remove any promotional material from  
the fan.  
IMPORTANT:  
When unpacking the fan,  
check to see you have  
received all the items  
listed in the Parts List before  
discarding the packaging.  
Fig. 2  
2. Fit the Outer Extension Tube on to  
the Locking Screw and tighten the  
Locking Screw firmly. (Fig. 3).  
Assembling Your Kambrook  
Arctic HV Pedestal Fan  
Base and Extension Tube  
Assembly  
1. Place the Fixing Tube into the hole  
of the Stability Plate (Fig. 1) then  
place both under the Base. Place  
the Washer on to the Locking Screw  
and fit through the hole at the  
bottom of the Stability Plate (Fig. 2).  
Fig. 3  
3. Unscrew the Height Adjustment Knob  
and pull up on the Inner Extension  
Tube to adjust the height, ensuring  
that the Height Adjustment Knob is  
fully tightened to hold in place before  
assembling the Fan Head. (Fig. 4).  
Fig. 1  
NOTE: The Washer fits into the  
groove on the bottom of the  
Stability Plate and is correctly  
fitted if the Locking Screw  
protrudes from the other side  
of the Base leaving enough  
thread to screw onto the  
Fig. 4  
Outer Extension Tube.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Kambrook Pedestal Fan  
continued-  
To Operate the Kambrook  
Arctic HV Pedestal Fan  
Plug the cord into a 230V or 240V power  
point and switch on.  
NOTE: The Inner Extension Tube is  
inside the Outer Extension Tube.  
4. Mount the pre-assembled Fan Head to  
the Inner Extension Tube and tighten  
The fan has 3 speeds.To adjust the flow of  
air, turn the fan speed dial located at the  
back of the fan to the preferred speed -  
LOW, MED or HIGH.To turn Off, turn the fan  
speed dial to the OFF position.  
the Fan Head Screw until it is tight (Fig. 5).  
NOTE: To avoid an electrical  
circuit overload, it is  
recommended that no other  
appliances are plugged into the  
same circuit as your fan when it  
is in use.  
Fig. 5  
Adjusting Air Flow Direction  
To adjust the flow of air left or right, manually  
swivel the fan to the desired position.  
IMPORTANT: The prongs  
on the pre-assembled fan  
head assembly may  
need to be pried apart  
slightly to more easily fit  
on to the top of the  
To adjust the flow of air up or down,  
slightly loosen the two tilt adjustment  
knobs located on either side of the  
fan and tilt the fan either upwards or  
downwards to suit. Once the fan is in  
the desired position, re-tighten the  
two knobs to hold in place.  
extension tube. Do not  
force the pre-assembled  
fan head onto the  
Adjustable Height  
extension tube.  
The fan height can be manually adjusted.  
Simply loosen the Height Adjustment Knob  
on the Extension Tube of the fan, then adjust  
to the required height. Re-tighten the Height  
Adjustment Knob when the desired height  
has been reached (Fig. 6).  
5. Press the two Tilt Adjustment Knobs  
firmly on to the bolts located on  
either side of the fan head. (Fig. 6)  
Fig. 6  
Fig. 6  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Always turn the fan to the OFF position,  
switch off at the power outlet and unplug  
at the power outlet before cleaning.  
To clean the fan, remove dust that  
may have accumulated with a soft  
cloth or a vacuum cleaner using the  
brush attachment.Wipe the exterior  
of the fan with a soft, damp cloth.  
Never use an abrasive cleaner.When not  
in use, store the fan in a cool, clean and  
dry location.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware SE7520JR2 User Manual
Intel Food Processor SA 1110 User Manual
IOGear Switch GCS1772 User Manual
JVC Portable CD Player RC EX10A User Manual
JVC Projection Television LCT2441 001B User Manual
Kathrein Satellite TV System UFD 420 User Manual
Kenmore Range 7904101 User Manual
Kenwood Speaker KFC XW1024D User Manual
Konica Minolta Camcorder Dimage A1 User Manual
Konica Minolta Digital Camera DiMAGE E40 User Manual