Kambrook Fan KFA413B User Manual

Kambrook - Australia  
Kambrook - New Zealand  
Building 2, Port Air Industrial Estate  
1A Hale Street  
Private Bag 94411  
Botany, Manukau  
Botany NSW 2019  
Auckland 2163  
Australia  
New Zealand  
Customer Service Line 1300 139 798  
Customer Service Fax 1800 621 337  
Customer Service Line/  
Spare Parts 0800 273 845  
Customer Service Fax 0800 288 513  
Due to continual improvement in design or otherwise, the product you  
purchase may differ slightly from the illustration in this book. Issue D11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
1
28/07/11 3:29 PM  
Contents  
Kambrook Recommends  
Safety First  
p3  
p5  
p6  
p7  
Your Kambrook Arctic  
Pedestal Fan  
Using Your Kambrook  
Arctic Pedestal Fan  
Care and Maintenance  
Important  
Please retain your instruction  
book for future use.  
In the event that you need some assistance with your  
Kambrook appliance, please contact our Customer Service  
Department on 1300 139 798 (Australia) or 0800 273 845  
(New Zealand). Alternatively, visit us on our website at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
2
28/07/11 3:29 PM  
Kambrook Recommends Safety First  
IMPORTANT: Please retain your  
instruction book for future use.  
At Kambrook, we believe that safe performance is the first priority in any  
consumer product, so that you, our valued customer can confidently  
use and trust our products. We ask that any electrical appliance that  
you use be operated in a sensible fashion with due care and attention  
placed on the following important operating instructions.  
Important Safeguards For Your Kambrook  
Arctic Pedestal Fan  
• Carefully read all instructions before  
operating the Kambrook Arctic  
Pedestal Fan for the first time and save  
for future reference.  
• Do not unplug the fan by pulling on  
the cord.  
• Never leave the fan unattended when  
in use.  
• To protect against electric shock, do no  
immerse the fan, cord or plug in water  
or any other liquid  
• This fan is intended for household  
use only and not for commercial or  
industrial use. Disconnect the power  
plug before dismantling, assembling or  
before cleaning and when the fan is  
not in use.  
• Never carry the fan by the cord or yank  
to disconnect from an outlet; instead,  
grasp the cord and pull to disconnect.  
Do not pull the cord around sharp  
edges or corners.  
• Avoid touching mobile parts of the fan.  
• Ensure the fan is on a dry and  
even surface.  
• Never insert fingers, pencils or any other  
objects through the guards whenever  
the power plug is connected, in  
particular while the fan is switched on.  
• The fan must not be used if the guards  
are not fastened correctly, according  
to these instructions.  
• Do not operate in the presence of  
explosives and/or flammable fumes  
or liquids.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
3
28/07/11 3:29 PM  
Important Safeguards For All  
Electrical Appliances  
• Always turn the appliance to the OFF  
• Carefully read all instructions before  
operating the appliance and save for  
future reference.  
• Remove and safely discard all  
packaging material and promotional  
labels before using the appliance for  
the first time.  
position, switch off at the power outlet  
and unplug at the power outlet when  
the appliance is not in use.  
• Before cleaning, always turn the  
appliance to the OFF position, switch  
off at the power outlet, unplug at  
the power outlet and remove the  
power cord, if detachable, from the  
appliance and allow all parts to cool.  
• Do not place this appliance on or near  
a heat source, such as hot plate, oven  
or heaters.  
• Position the appliance at a minimum  
distance of 20cm away from walls,  
curtains and other heat or steam  
sensitive materials and provide  
adequate space above and on all  
sides for air circulation.  
• Fully unwind the power cord before use.  
• Do not let the power cord hang over  
the edge of a bench or table, touch  
hot surfaces or become knotted.  
• To protect against electric shock, do  
not immerse the power cord, power  
plug or appliance in water or any other  
liquid, unless it is recommended in the  
cleaning instructions.  
• The appliance is not intended for use  
by persons (including children) with  
reduced physical, sensory or mental  
capabilities, or lack of experience  
and knowledge, unless they have  
been given supervision or instruction  
concerning use of the appliance, by a  
person responsible for their safety.  
• Children should be supervised to  
ensure that they do not play with the  
appliance.  
• It is recommended to inspect the  
appliance regularly. Do not use  
the appliance if the power supply  
cord, plug, connector or appliance  
becomes damaged in anyway. Return  
the entire appliance to the nearest  
authorised Kambrook Service Centre  
for examination and/or repair.  
• Any maintenance other than cleaning  
should be performed at an authorised  
Kambrook Service Centre.  
• This appliance is for household use only.  
Do not use this appliance for other than  
its intended use. Do not use in moving  
vehicles or boats. Do not use outdoors.  
Misuse may cause injury.  
• The installation of a residual current  
device (safety switch) is recommended  
to provide additional safety protection  
when using electrical appliances. It  
is advisable that a safety switch with  
a rated residual operating current  
not exceeding 30mA be installed in  
the electrical circuit supplying the  
appliance. See your electrician for  
professional advice  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
4
28/07/11 3:29 PM  
Your Kambrook Arctic Pedestal Fan (KFA413 shown)  
1. Fan blade size: 40cm  
2. Choice of 3 speed settings  
Parts List  
9. Front grille with securing clips  
and screw  
10. Rear grille  
11. Blade cap and guard locking nut  
12. Plastic fan blade  
13. Motor head and stand  
14. Pedestal extension tube  
15. Height adjustment ring  
16. 2 piece criss-cross base  
17. Criss-cross collar  
3. 80° oscillation to disperse the air  
throughout the room  
4. Easy twist controller switch  
5. Height adjustable for  
comfort control  
6. Tilt adjustable head to control the  
direction of the air  
7. Metal grille and plastic blades  
8. Convenient carry handle for  
easy portability  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
5
28/07/11 3:29 PM  
Using Your Kambrook Arctic Pedestal Fan  
Before First Use  
Remove any promotional material from  
the fan.  
IMPORTANT: When  
unpacking the fan, check  
to see you have received  
all the items listed in the  
Parts List, before discarding  
the packaging.  
Fig. 2  
3. Place the motor head housing onto  
the Pedestal Extension Tube.  
Assembling Your Arctic  
Pedestal Fan  
4. Tighten the screw to secure the  
motor head housing to the Pedestal  
Extension Tube.  
Base and Pedestal Tube Assembly  
1. Interlock the criss-cross bases.  
Remove the four screws from the  
criss-cross bases, and align these  
four holes with those on the flange.  
Secure the flange to the criss-cross  
bases with the four screws. This might  
require a bit of force.  
Fan Head Assembly  
1. Remove the Blade Cap from the  
Motor shaft by turning it clockwise,  
and then remove the Guard Locking  
Nut by turning it anti-clockwise.  
2. Thread the Motor shaft through the  
centre hole of the Rear Grille, placing  
the Rear Grille into position. Make sure  
that the carry handle, on the back of  
the Rear Grille is located above the  
motor housing. Ensure the Rear Grille  
is aligned with the locating pins and  
fix the grille into position by replacing  
the Guard Locking Nut. Make sure that  
the Rear Grille has not slipped off the  
locating pins before tightening. This  
should be done by hand. Do not force.  
Fig. 1  
NOTE: When positioning the  
Rear Grille on the Motor shaft,  
always ensure the carry handle  
on the grille is positioned in the  
upright position.  
2. Loosen and remove the Height  
Adjustable Ring. Slide the criss-cross  
collar over the support tube. (Fig.  
2) Extend the support tube. A bit of  
force may be required to grasp the  
support tube, located inside the  
Pedestal Extension Tube. Re-attach  
and tighten the Height Adjustment  
Ring to prevent slipping.  
3. Insert the Plastic Blade onto the Motor  
shaft, and match the pin slots in the  
blade with the Motor shaft pin.  
4. Fix the blade into place by tightening  
the Blade Cap onto the Motor shaft in  
an anti-clockwise direction. This should  
be done by hand. Do not force.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
6
28/07/11 3:29 PM  
5. Unlatch the Securing Clips on the  
Front Grille and unscrew the small  
screw located at the bottom of the  
front guard.  
Setting the Oscillation  
The oscillation function works in all air  
flow settings.  
Press down the Oscillation switch to  
activate. The fan will begin to oscillate  
from side to side.  
6. Align and press together the Front  
and Rear Grille, and secure by  
snapping shut the Securing Clips  
over edges of both grilles. Make sure  
that the small holes at the bottom of  
both grilles are aligned. Tighten the  
Securing Clips by hand.  
Lift the Oscillation switch to stop the fan  
from oscillating.  
NOTE: The Oscillation switch is  
located behind the Rear Grille,  
on the Motor head housing.  
7. Thread the screw through the small  
holes of both the front and back grilles,  
and tighten using the nut provided.  
To Operate the Arctic  
Pedestal Fan  
Plug the cord into a 230V or 240V power  
point and switch on.  
Adjustable Tilting Head  
The Arctic Pedestal Fan incorporates an  
Adjustable Tilt Head for greater  
air coverage.  
To adjust the angle of the head,  
while securely holding the shaft of the  
pedestal tube, simply lift or lower the  
Motor head housing, the head will click  
as it is being adjusted.  
NOTE: To avoid an electrical  
circuit overload, it is  
recommended that no other  
appliances are plugged into the  
same circuit as your fan when it  
is in use.  
Adjustable Height  
The Arctic Pedestal Fan height can  
be adjusted.  
Use the Twist Controller Switch to select  
the desired air flow speed setting.  
0 – The fan is in the ‘OFF’ position  
Simply loosen the Height Adjustable Ring  
on the Pedestal Tube of the fan. Then  
adjust to the required height. Re-tighten  
the Height Adjustable Ring when the  
desired height has been reached.  
1 – Low  
2 – Medium  
3 – High  
Care and Maintenance  
Always switch the Arctic Pedestal Fan off,  
prior to cleaning the housing, base, grilles  
and blades.  
To clean the outside of the fan, wipe the  
exterior with a soft, damp cloth. Never use  
an abrasive cleaner.  
When not in use, store the fan (preferably  
in its original box) in a cool, clean and  
dry location.  
Fig. 3  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
KFA413B_IB_D11_FA.indd  
7
28/07/11 3:29 PM  

Insignia DVD Player NS 1DVDR User Manual
InStep Stroller SB100 User Manual
Intelligent Motion Systems Computer Hardware Modular LYNX System User Manual
IRiver MP3 Player iFP 500 Series User Manual
Jacuzzi Landscape Lighting GQ99000 User Manual
Kenwood Car Video System KVT 837DVD User Manual
Kenwood Marine Radio 762G User Manual
Kicker Speaker S18XSP User Manual
King Canada Saw KC 226 User Manual
Korg Electronic Keyboard 73 key User Manual