Product Line Overview
Horizontal Bandsaws
A Complete
Line of Manual,
Semi-Automatic
and Fully
Automatic
Horizontal
Bandsaws
America’s #1...
Accept No Imitation
For a detailed catalog of the full line of
KALAMAZOO Horizontal Bandsaws visit our Web Site:
or e-mail us and request an electronic (pdf) catalog at:
info@clausing-industrial.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Models
H9AW & 13AW
9" and 13"
Wet Cutting
Bandsaw
Equipped with 2 hp,
115v/220v 1ph
or 208v/230v/460v 3ph
drive motor
• Variable speed drive (fpm): 62-390 H9AW 65-345 13AW
• Quick and easy blade installation
• Rotary wire brush for chip removal and improved
blade life
• Enclosed gear box with gears in an oil bath
• Gravity feed head controlled by counterbalance
spring working with a hydraulic cylinder to insure
constant feed pressure on the blade
• Swivel vise enables quick set-up for angle cuts
up to 45°
• Cutting capacity 90°
Round
H9AW/H9AWSA 13AW/13AWSA
9"
13"
Rectangular
5" x 13"
10" x 20"
• Cutting capacity 45°
Round
8"
12"
Rectangular
8" x 8"
9" x 13"
Models H9AWSA
13AWSA
9" and 13"
Wet Cutting
Semi-Auto
Bandsaw
Equipped with 2 hp,
208v/230v/460v 3ph
drive motor
Same standard features as H9AW and 13AW plus...
• Hydraulic head lift, that lifts saw head at end of
cutting cycle
• Hydraulic vise automatically clamps work piece at
start of cutting cycle and releases work piece at the
end of the cutting cycle
Download from Www.Somanuals.com. All Manuals Search And Download.
Models BS400SA
and BS450SA
16" and 18"
Wet Cutting
Semi- Automatic
Bandsaw
with powerful
230/460 drive motor
• Hydraulic controlled feed for constant cutting feed
• Variable speed drive: 65-260 fpm
• Blade tension system with carbide and roller blade guides
• Coolant system through both guides
• Blade cleaning brush
• Hydraulic operated vise
• Saw blade shut off at end of cut
• Thermal overload switches
• Guarded blade and wheel covers
• Cutting capacity
Round
BS400SA
16"
BS450SA
18"
Rectangular
• Drive motor
16" x 12"
6 hp
18" x 16"
8-1/2 hp
Model KC12AX
12" Wet
Cutting
Automatic
Bandsaw
with powerful 5 hp,
230/460 drive motor
• Automatic or semi-automatic operation
• Infinitely variable blade speed: 75-400 fpm
• LED blade speed readout • Hydraulic down feed
• Vise clamps work piece both sides of blade
• Auto shutoff at end of material or after preset
number of cuts
• Front-mounted digital length gauge
• Cutting capacity:
Round
11.8"
Rectangular
11.8" x 12.6" or 7.9" x 14.2"
• Optional bundle cutting width
• Optional bundle cutting height
6.5" to 10"
2" to 8"
Download from Www.Somanuals.com. All Manuals Search And Download.
Models AH9AW
KALAMATIC
9" Wet Cutting
Automatic
Bandsaw
Equipped with 2 hp,
208v/230v/460v 3ph
drive motor
Operators can set-up the Kalamatic quickly and
the procedure is easily learned. The feed roller
and saw head is lifted, stock loaded and
positioned, stock stop adjusted for proper
length, the number of pieces required is entered
in the counter and then the cutting cycle is
initiated by the operator. After that, the saw
operates automatically until all pieces are cut or
the stock is exhausted.
All controls are clearly marked and are designed
to also allow the operator to interrupt on
automatic cycle, to cut an individual
cut-to-measure piece and then to resume the
automatic cycle without losing the proper count.
• Variable speed drive: 62-390 fpm
• Quick and easy blade installation
• Rotary wire brush for chip removal and
improved blade life
• Cast iron 25-1/2" high bed
• Blade size: 1" x .035" x 10'-101⁄2"
• Enclosed gear box with gears in an oil bath
• Gravity fed head controlled by counterbalance
springs working with a hydraulic cylinder to
insure constant feed pressure on the blade
• Two (2) Year Limited Warranty
• Cutoff length capacity, 1/8"-30"standard,
• Cutting Capacity 90°...
Round tubing
Round solid
Rectangular tubing
Flat solids
9"
4" or 2500 lbs
8" x 10"
2" x 12" or 950 lbs
Download from Www.Somanuals.com. All Manuals Search And Download.
Model MS1218VS
12" Wet
Cutting Semi-
Automatic
Miter Bandsaw
• 0°-45° miter cuts without swinging material
• 2 hp main drive with magnetic starter
• Variable speed drive: 80-360 fpm
• 230/460 60 cycle 3 phase electricals.
• Coolant application through both guides
• Solid carbide guides with rollers
• Quick position vise with 18" opening
• Automatic shut-off at end of cut
• Totally enclosed transmission
• Blade cleaning brush • 1" wide blade
• 21-3/4" heigh cast iron bed
• Easily adjusted head feed with power lift
• 90° cutting capacity:
12" round
10" x 10" square
10" x 16" rectangular
• 45° cutting capacity:
8" round
8" x 8" square
8" x 12" rectangular
For a detailed catalog of the full line of
KALAMAZOO Horizontal Bandsaws visit our Web Site:
or e-mail us and request an electronic (pdf) catalog at:
info@clausing-industrial.com
Clausing Industrial Inc.
1819 North Pitcher Street
Kalamazoo, Michigan 49007
Phone: 269-345-7155
Fax: 269-345-5945
Web Site: www.clausing-industrial.com
Information: [email protected]
All specifications subject to change
Printed 12/2002
Download from Www.Somanuals.com. All Manuals Search And Download.
|