R
77-20MS90M01520(English)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION (Wall Mounting)
PEDESTAL INSTALLATION
Position the bracket (supplied) on the wall (as show below) where you want to hang the
center unit. Drill 2 holes slightly undersized for a firm fit.
Secure the bracket on the wall using 2 dowels and 2 screws (supplied)
The mounting screws are to be anchored into solid wall support, such as wood frame or
concrete wall.
1. Set the unit on the pedestal (1).
2. To fix the insert, then fix it by 2 pcs screws as (2).
Mount the center unit onto the wall bracket.
Make sure the mounting tab on the center unit fits securely into the mounting slot on the
wall bracket.
Screws and plastic dowels are also provided for speakers if they are to be wall-mounted
away from the center section.
2
1
PLACE AND FIX THE SPEAKER
2
Insert the speaker stud into the hole
of the main unit as (1).
Push the speaker down to the end
until click sound is heard to confirm
fixed as (2).
1
1
1
2
1
DISASSEMBLE THE SPEAKER
1
Pushing the speaker up from the
back side as (1).
Release the speaker from the main
unit speaker holder as (2).
2
2
2
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
REMOTE CONTROL
TOP VIEW
1
2
3
4
5
6
28. FOLDER DN/MEM-DN Button
29. CD STOP/BAND Button
30. PLAY MODE Button
31. POWER Button
31
32
1. POWER Button
2. EQ Button
3. FUNCTION Button
4. CD Door Open/Close Button
5. FOLDER DOWN/MEM. DOWN Button
6. FOLDER UP/MEM. UP Button
32. FUNCTION Button
33. TUNING/CD SKIP
34. PROGRAM Button
33
34
35
/
Buttons
30
35.
CD PLAY/PAUSE Button
29
28
36. FOLDER UP/MEM-UP Button
37. VOLUME UP/DOWN Button
FRONT VIEW
36
7
8
9
10 11
7. REMOTE Sensor
8. CD Door
37
9. STANDBY Indicator
10. PLAY MODE Button
11. STOP/BAND Button
12. CD/TUNER LCD Display
13. PLAY/PAUSE Button
14. VOLUME UP/DOWN Button
15. TUNING/CD SKIP UP/Next and DN/Back Button
16. PROGRAM Button
12
13
14
17. PEDESTAL
15
16
REAR VIEW
BATTERY REPLACEMENT
17
18. SPEAKER Terminal
19. AC Input Socket
20. SUBWOOFER Jack
To connect with external sub-woofer speaker
(not included)
21. HEADPHONE Jack (3.5mm)
22. FM Antenna
1. Remove the battery compartment cover.
2. Insert two "AA" size / LR6 / UM-3
batteries into the battery compartment
and ensure the proper polarities are
maintained.
2
1
3. Replace the battery compartment cover.
23. AUX Socket (R)
24. AUX Socket (L)
Battery Life
27
26
25. BATTERY Door/Compartment
26. RESET Switch - If the set locked up, or does
not display information, or the data appearing
are wrong, press the “RESET” switch with a
sharp object, e.g. needle etc. The data must
then be re-entered.
Note: Tuner memory would be lost when
“RESET” switch pressed.
27. FM STEREO/MONO Switch
To prevent damage due to batteries
leaking, the remote should be checked
periodically as required.
Damage due to battery leakage is not
covered by the warranty.
When the battery becomes weak, the
remote control will not work, be sure to
replace both batteries at the same time. We
recommend ALKALINE batteries for longer
usable life.
3
25
24
23
22
OPEN
18
19
Headphone Jack
21 20
Headphone Jack “PHONES” (21) for headphones with 16-32 Ohm
impedance (3.5mm jack). Use corresponding adaptors (Electronics
shops) if you have different plugs. The speakers are automatically
switched off when the headphones are being used.
CAUTION:
Listening at high power for long hours can damage users’ ears.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING PRESET STATIONS
LISTENING TO THE RADIO
OPERATING INSTRUCTION
1.
Tune to the station you wish to store by
pressing TUNING UP or DOWN button (15) or
(33).
1.
Press the POWER button (1) or (31) to turn on
the unit then press the FUNCTION button (3) or
(32) to select RADIO mode.
POWER ON/OFF
1. Connect the AC cord, make sure the voltage is correct and
then press the POWER button (1) or (31) to turn on the unit.
POWER
FUNCTION
FUNCTION
2. Press the FUNCTION button (3) or (32) to select your desired
mode (CD/AUX/TUNER).
2.
Press the STOP/BAND button (11) or (29) for
AM or FM band.
Example : FM mode
The unit enables you to program 10 stations of FM
and 10 stations of AM band.
2. Press the PROGRAM button (16) or (34).
(“MEM” flashing)
POWER
3. Press the POWER button (1) or (31) to turn off the unit.
3. Press the TUNING Up or Down button (15) or
(33) to tune to the desired station.
BASIC OPERATION
Volume Control
3. Press the FOLDER UP or FOLDER DOWN
button (5)/(6) or (28)/(36) repeatedly to set the
desired preset station number. (“MEM” still
flashing)
Once the required mode has been located, adjust the VOLUME
button (14) or (37) up or down to the desired level.
Preset Equalization
Manual Tuning - Press and hold the TUNING
UP or DOWN buttons (15) or (33) until the
display approaches your desired station. Then
tap the buttons repeatedly until the display
shows the exact frequency.
Auto tuning - Press the TUNING UP or DOWN
buttons momentarily and release. The tuner will
move up or down to the next available station.
EQ
To select desired sound effect, press the EQ button (2) repeatedly
to cycle through the preset EQ show on the display — CLA
(Classic), ROCK, POP.
4.
Press the PROGRAM button (16) or (34). The
station is stored. (“MEM” steady on)
FM Stereo/Mono
Slide the FM Stereo/Mono switch (27) to choose between FM stereo
(2-channel) reception or FM mono (1-channel) reception. If the FM
stereo reception is too noisy, choose the FM mono reception setting
instead.
4. When finished listening, press the POWER
button (1) or (31) to turn off the unit.
AUX Operation
To listen to audio signals from an external unit through this unit.
1. Connect the right (23) and left (24) plugs from the auxiliary unit.
2. Press the FUNCTION button (3) or (32) select to AUX mode.
3. Operate the auxiliary unit by following it’s owners manual.
5.
To store other stations, repeat above steps.
RECALLING PRESET STATION
Press the FOLDER UP or FOLDER DOWN
button (5)/(6) or (28)/(36) on main unit or
remote control repeatedly to select the desired
station.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Skip and Search Function
PLAYING COMPACT DISCS
To play the disc
Press the SKIP Next or Back buttons (15) or (33) briefly.
Press the PLAY/PAUSE button (13) or (35) to play
the CD.
1.
Press the POWER button (1) or (31) turn on
the unit then press the FUNCTION button (3) or
(32) to select CD mode.
FUNCTION
IN PLAY MODE
IN STOP MODE
PRESS ONCE
PRESS ONCE
PRESS TWICE
Playing track 1
B A C K T O T H E
BEGINNING OF
THE CURRENT
TRACK
PREVIOUS
TRACK
PREVIOUS
TRACK
If there is no CD inside or disc damaged, a
"- - -" display will appear.
2.
NEXT TRACK
NEXT TRACK
When there is no disc
Press and hold the SKIP button during playback :
: FAST BACKWARD
NOTE : During search mode low level audio will be heard to assist in locating the
correct point in the track.
: FAST FORWARD
To pause the CD
Press the PLAY/PAUSE button while the disc is
playing. Press it again to resume playing.
To repeat a track or disc
Press the PLAY MODE button (10) or (30) one time,
"one track repeat" will be active.(“REP” flashes)
Loading a disc
One track repeat (flashing)
1. Press the CD door Open button (4) to open the
CD door.
While paused
2.
Put a disc inside and then close the CD door.
After that, reading disc will start.
Note: Ensure the disc is pushed fully and
locked in place.
With one more press, "all track repeat" will be active.
(“REP A” will show steadily)
All track repeat (steady)
With one additional press, the repeat mode is cancelled.
After reading disc
To stop the disc
Press the STOP button (11) or (29).
Note: This unit is CD-R / -RW compatible.
Random play function
In CD stop mode, press the PLAY MODE button
(10) or (30) on main unit or remote control three
times (“RAND” displayed), then press PLAY/
PAUSE button (13) or (35) to start random play.
Press PLAY MODE button (10) or (30) once again
to change normal playing mode.
Random playing start
Stop condition (Total track display)
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING MP3 DISCS
PROGRAMMED PLAYBACK
2. Press CD SKIP
/
buttons (15) or
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop
mode.
1.
Press the POWER button (1) or (31) to turn on
the unit then press the FUNCTION button (3) or
(32) to select CD mode.
(33) to select desired track.
1.
4.
Press the PROGRAM button (16) or (34) one
time. (“MEM” flashes)
To continue to program, repeat steps 2 and 3
for each selection.
FUNCTION
When program is full
If there is no disc inside or disc damaged, a
"- - -" display will appear.
2.
Folder 2 track 3 selected
When there is no disc
Reviewing programs
Press the PROGRAM button (16) or (34)
repeatedly. The track number programmed on
each program number will be displayed.
2. Press the SKIP Next or Back buttons (15) or
(33) to select the desired track to be
programmed.
3. Press the PLAY/PAUSE button (13) or (35) to
start playing.
5.
Press PLAY/PAUSE button (13) or (35) to play
the programmed tracks.
Loading a disc
1. Press the CD Door Open button (4) to open the
CD door.
2.
Put a disc inside and then close the CD door.
After that, reading disc will start.
Note: Ensure the disc is pushed fully and
locked in place.
Choose track 4
Playing track 3 of folder 2
Clear the program
Press the PROGRAM button (16) or (34) to recall
previously programmed track (“MEMORY” icon
flashes), then press CD stop button to cancel the
preset programs or change function mode or open
the CD door.
After reading disc
To pause the MP3
3. Press the PROGRAM button (16) or (34) one
time, then the selected track, e.g., track 4 is
stored.
Press the PLAY/PAUSE button (13) or (35) while
the disc is playing. Press it again to resume playing.
Note: This unit is CD-R / -RW compatible.
To play the disc
1. Press the FOLDER UP or FOLDER DOWN
button (5)/(6) or (28)/(36) to select desired
folder. Total tracks of select folder will then be
shown.
Folder 2 selected
Tracks of folder 2
While paused
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Once your desired mode selected, press the
PLAY/PAUSE button (13) or (35) to start playback
from stop mode.
To stop the disc playing
4. Press the PROGRAM button again, then track
4 of folder 3 is stored.
6. Press the PLAY/PAUSE button (13) or (35) to
play the programmed tracks.
Press STOP button (11) or (29).
Stop condition (TOC display)
Playing track 4 of folder 3
5. Press the PLAY MODE button (10) or (30) five
times to cancel above modes.
PROGRAMMED PLAYBACK
This CD player enables you to program up to 20
tracks in the sequence of your choice. First
select CD stop mode.
PLAY MODE for Repeat Track/Folder and
Random Play Operation
1. Press the PROGRAM Button (16) or (34) one
time.
Note: Press the PROGRAM button
(if programmed tracks still exist) then PLAY/
PAUSE button, the program play will start
again.
1. Press the PLAY MODE button (10) or (30) once
for current track repeat.
5. To continue to program, repeat steps 2 to 4 for
each selection.
Clear the program
Press the PROGRAM button (16) or (34) to recall
previously programmed track (“MEMORY” icon
flashes), then press CD stop button to cancel the
preset programs or change function mode or open
the CD door.
When Program is full
Program input mode
2. Press the PLAY MODE button (10) or (30) twice
for tracks in current folder repeat.
Reviewing programs
2. Press the FOLDER UP or FOLDER DOWN
button (5)/(6) or (28)/(36) to select desired
Press the PROGRAM button (16) or (34)
repeatedly. The track number programmed on
each program number will be displayed.
folder.
Choose folder 3
3. Press the PLAY MODE button (10) or (30) three
times for tracks in all folder repeat.
3. Press the CD SKIP
or
button (15)
or (33) to select the desired track to be
programmed.
4. Press the PLAY MODE button (10) or (30)
four times for tracks in random play mode.
(in stop mode only)
Choose track 4 in folder 3
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
CARE AND MAINTENANCE
COMPACT DISC CARE
Possible cause
Symptom
Solution
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in
contact with the shiny, unprinted side of the disc.
Radio
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners
to clean the disc. If necessary, use a CD cleaning kit.
If the disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the disc.
Never wipe in circular motions.
Retune the AM (MW) or FM
broadcast station.
Station not tuned properly for AM
(MW) or FM
Noise or sound distorted on AM
(MW) or FM broadcasts.
FM : Antenna is not extended.
Extend FM antenna.
AM (MW) : Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
To remove a disc from its storage case, press down on the center of the case and lift the disc out,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris
so gently wiping with a soft cloth should remove most particles.
FUNCTION Selector not set to Set FUNCTION Selector to RADIO
AM (MW) or FM, no sound.
RADIO position.
position.
Volume at minimum
Increase Volume.
Compact Disc Player
CD Player will not play.
FUNCTION selector not set to CD Set FUNCTION selector to CD
position.
position.
CD is not installed or installed
incorrectly.
Insert CD with label side up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
Disc inserted upside down.
Disc is dirty.
Insert disc properly.
Clean disc.
Disc is inserted but CD player
skips over spot and will not play,
Disc is non-standard.
Use correct disc.
SPECIFICATIONS
Power Supply
Power Output
AC 120Volts ~ 60Hz
DC 3V (1.5V x 2 “AA” batteries for tuner memory)
5 W/CH 10% THD
Dimension of Unit 200(W)x135(D)x262(H)mm
Radio Section
Tuning : PLL with 20 Presets (FM 10, AM 10)
Freq. Range : AM 520 - 1710KHz, FM 87.5 - 108MHz
CD Section
Vertical Front Loading CD
Speaker System
Woofer: 4", 3.2 ohm
Tweeter: 1 1/2"
Remote Control
12 Keys, Battery size "AA" x 2
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|