Jwin DVD Player JD VD518 User Manual

HOME DVD PLAYER  
V10M10_IM_EN_12212007  
2-Channel Progressive-Scan DVD Player with  
HDMI Output & MPEG4 Playback  
JD-VD518  
INSTRUCTION MANUAL  
Please read this manual carefully before operating and  
save it for future reference.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
USER SAFETY GUIDE  
USER SAFETY GUIDE  
IMPORTANT SAFETY INSTRUCTIONS  
1. READ INSTRUCTIONS – All the safety and operating instructions should be read before  
IMPORTANT SAFETY INSTRUCTIONS – CONTINUED  
14. CLEANING – The appliance should be cleaned with a dry cloth.  
15. ATTACHMENTS – Only use attachments / accessories specified by the manufacturer.  
16. DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service  
professional when:  
the appliance is operated.  
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a  
secure place for future reference.  
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions  
should be adhered observed.  
a. The power-supply cord or plug has been damaged.  
b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.  
c. The appliance has been exposed to rain or water.  
4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.  
5. WATER AND MOISTURE – The appliance should not be used near water. For example:  
near a bathtub, kitchen sink, laundry tub, and/or swimming pool.  
d. The appliance has been dropped and suffered damage.  
e. The appliance does not appear to operate normally, or exhibits a change in  
performance.  
6. VENTILATION – The appliance should be situated so that its location and position does  
not interfere with its proper ventilation. For example, the appliance should not be situated  
on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be  
placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of  
air through the ventilation openings.  
17. SERVICING – The user should not attempt to service the appliance beyond that described  
in the user's operating instructions. All other servicing should be referred to qualified  
service professional.  
18. REPLACEMENT PARTS – When replacement parts are required, be sure the service  
technician certifies in writing that he has used replacement parts specified by the  
manufacturer that have the same characteristics as the original parts. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
7. HEAT – The appliance should be situated away from heat sources such as radiators, heat  
registers, stoves, or other appliances (including amplifiers) that produce heat.  
8. POWER SOURCES – The appliance should be connected to a power supply only of the  
type described in the operating instructions or as marked on the appliance. If you are not  
sure of the type of electrical power supplied to your home, consult your dealer or local  
power company. For those sets designed to operate from battery power, refer to the  
operating instructions.  
19. SAFETY CHECK – Upon completion of any service or repairs to the set, ask the service  
technician to perform routine safety checks (as specified by the manufacturer) to  
determine that the set is in safe operating condition, and to so certify.  
20. BATTERY USAGE – To prevent battery leakage, which may result in bodily injury,  
property damage or damage to the unit, follow these instructions:  
9. GROUNDING OR POLARIZATION – Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into your outlet,  
consult an electrician for replacement of the obsolete outlet.  
a. Install all batteries correctly according to the polarity (+ -) as marked on the unit.  
b. Do not mix old and new batteries, carbon and alkaline, etc.  
c. Remove batteries from the unit when the device will not be used for an  
extended period of time.  
10. POWER CORD PROTECTION – Power supply cords should be routed so that they are  
not likely to be walked on or obstructed by items placed upon or against them. Pay  
particular attention to cords at plugs, convenience receptacles, and the point at which they  
exit from the appliance.  
21. LEAD AND MERCURY – This product may contain lead and/or mercury. Disposal of  
these materials may be regulated by your local authorities due to environmental  
considerations. For more detailed disposal or recycling information, please contact your  
22. LIGHTING – During a lighting storm, unplug the power cord from the wall outlet and  
disconnect the antenna. This will prevent damage to the device due to lighting and power-  
line surges.  
11. NONUSE PERIODS – The power cord of the appliance should be unplugged from the  
outlet when the appliance is to be left unused for an extended period of time.  
12. OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and  
liquids are not spilled into the device’s openings.  
23. OVERLOADING – Do not overload the wall outlets, extension cords, or convenience  
receptacles beyond their capacity, since this can result in fire or electric shock. Always  
turn this device off when it is not to be used. When this device is left unattended and  
unused for the long period of time, unplug it from the wall outlet as a precaution against  
the possibility of an internal malfunction that could create a fire hazard.  
13. CARTS AND STANDS – The appliance should be used only with a  
cart or stand that is recommended by the manufacturer. An appliance  
and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and  
cart combination to overturn  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
TABLE OF CONTENTS  
TABLE OF CONTENTS  
GETTING STARTED  
OPERATIONAL INSTRUCTIONS (CONTINUED)  
Compatibility. …..………..…………………………………………………………………… 8  
General features ……………………………………………………………………………9  
Location of controls on the main unit ……………………………………………………… 10  
Location of indications on the LED screen ………………………………………………10  
Location of controls on the remote control …………………………………………………11  
Installing the remote control batteries ………………………………………………………12  
Notes on using the remote control ………………………………………………………… 12  
Brief instructions on installing the DVD player …………………………………………… 13  
Connecting the DVD Player to a TV Set using an AV Cable …………………………… 14  
Connecting the DVD Player to a TV Set using S-Video………………………………… 14  
Connecting the DVD Player to a TV Set using the Y/Pb/Pr Jacks ………………………15  
Connecting the DVD Player to an audio amplifier with digital audio input …………… 15  
Navigating the Setup Menu ……………………….…………………………………………16  
Language Setup …………………………………….……………………………………… 16  
Video Setup …………………………………………………………..……………………… 17  
Audio Setup …………………………………………………………………………………19  
Misc setup …………………………………..…………………………………………………20  
[VOL +/-] Buttons …………………………………………………………………………… 23  
[MUTE] Button ……………………………………………………………………………… 23  
[ZOOM] Button ……………………………………………………………………………… 23  
[ANGLE] Button ……………………………………………………………………………… 23  
[LANGUAGE] button ………………………………………………………………………23  
[AUDIO] Button ……………………………………………………………………………… 23  
[SUBTITLE] Button …………………………………………………………………………23  
[STEP] Button ………………………………………………………………………………. 23  
[P/N] Button ……………………………………………………………………………….. 23  
[V-MODE] Button …………………………………………………………………………… 24  
[DISPLAY] Button ………………………………………………………………………….. 24  
[GOTO] button ………………………………………………………………………………. 24  
[CLEAR] button ……………………………………………………………………………… 24  
[SETUP] button ……………………………………………………………………………… 24  
[PROG] button ………………………………………………………………………………. 24  
ADVANCED FEATURESNAL FEATURES  
OPERATIONAL INSTRUCTIONS  
Playing MP3 / WMA CDs …………………………………………………………………… 25  
Displaying Picture CDs ……………………………………………………………………. 26  
[STANDBY] Button …………………………………………………………………………. 21  
[0 -9] Buttons ………………………………………………………………………………… 21  
[W / S / T / X] Buttons……………………………………………………………………… 21  
[ENTER] Button ……………………………………………………………………………… 21  
[OPEN/CLOSE] Button ……………………………………………………………………21  
[PLAY] Button ……………………………………………………………………………….. 21  
[STOP] button …………………………………….………………………………………… 21  
[XX] FWD Button ………………………………………………………..………………… 21  
[WW] REV Button …………………………………………………………………………… 21  
[|WW] PREV Button ………………………………………………………………………… 22  
[XX|] NEXT Button ………………………………………………………………………… 22  
[MENU] Button ……………………………………………………………………………… 22  
[A – B] Button ………………………………………………………………………………22  
[SLOW] Button ………………………………………………………………………..…….. 22  
[TITLE] Button ………………………………………………………………………………. 22  
[REPEAT] Button ………………………………………………………………………….. 22  
CARE AND MAINTENANCE GUIDES  
Handling a disc ……………………………………………………………………………… 27  
Cleaning the unit ……………………………………………………………………………. 27  
TROUBLESHOOTING GUIDE ……………………………………………………................... 28  
SPECIFICATIONS ……………….………………………………………………………………. 29  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
COMPATIBILITY  
Thank you for purchasing JD-VD518. Unpack the unit and make sure all the accessories are  
put aside so they will not be lost. We recommend that you retain the original carton and  
packaging materials for future use, should you transport or ship the unit in the future.  
DVD VIDEO  
Multi-angle  
2-Channel Progressive-Scan DVD Player with HDMI Output & MPEG4  
Playback  
Compatible with NTSC / PAL / AUTO system  
HDMI digital output (480P / 576P)  
Progressive- and interlaced-scan video outputs  
Capable of MPEG4 decoding  
Capable of Dolby® digital decoding  
Coaxial digital audio output  
AUDIO CD  
Subtitle choices  
Audio choices  
TV Aspect Ratio  
2-channel audio output  
Multiple subtitles and viewing angles  
Slow- and fast-motion playback  
MP3 CD  
Zoom operation and repeat playback  
Convenient on-screen display (OSD)  
Playable media: DVD / VCD / MPEG4 CD / MP3 CD / Audio CD / JPEG CD / CD-R / CD-  
RW / DVD±R / DVD±RW  
Kodak Picture CD  
Dolby® Digital  
In the Box  
DVD Player  
Remote Control  
AV Cable  
Instruction Manual  
Warranty Card  
This product incorporates copyright protection technology that is protected by method claims of  
certain U.S patents and other intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection technology must be authorized by  
Macrovision Corporation, and is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is  
prohibited.  
ABOUT DISC ERROR  
This compact disc player has built-in error compensation circuits to correct for minor defects in  
a disc. There are limits, however, to the amount of correction available. In some cases, the  
DVD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem  
may be caused by defects (such as scratches) in the disc being played, which are too large for  
the error compensation circuits to handle. If you encounter this problem, try a new disc before  
having the unit serviced. If the DVD player operates normally, the skipping problem is probably  
due to a defective disc.  
The product complies with the Kodak Picture CD format and will display Kodak Picture CDs.  
The “Kodak Picture CD Compatible” logo is a trademark of Eastman Kodak Company and is  
used with the permission.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby  
Laboratories, Inc. All rights reserved.  
Note: Only the above types of discs can be played on this unit.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
Location of Controls on the Main Unit  
Location of Controls on the Remote Control  
[Front Panel]  
1. STANDBY  
2. SUBTITLE  
3. AUDIO  
18. VOL + (Volume +)  
19. VOL – (Volume -)  
20. MENU  
4. OPEN / CLOSE  
5. ANGLE  
21. TITLE  
22. UP (S)  
6. PROGRAM  
7. SETUP  
23. ENTER  
24. RIGHT (X)  
25. DOWN (T)  
26. STOP  
1. Power button  
2. Disc loader  
6. OPEN / CLOSE button  
8. LEFT (W)  
7. STOP button  
9. MUTE  
3. Remote control sensor  
4. LED screen  
8. NEXT. button  
10. Numerical keypad  
11. REV (Reverse)  
12. FWD (Forward)  
13. P / N (PAL / NTSC)  
14. DISPLAY  
27. GOTO  
9. PLAY / PAUSE button  
28. CLEAR  
5. PREV button  
29. NEXT  
30. PREV (Previous)  
31. SLOW  
[Rear Panel]  
15. STEP  
32. ZOOM  
16. A-B REPEAT  
17. TITLE  
33. V-MODE  
34. REPEAT  
1. 2 CH Audio output  
2. Composite video output  
3. S-Video output  
4. Component Video output (Y, Pb, Pr)  
5. Coaxial Digital Audio output  
6. HDMI out  
Location of Indications on the LED Screen  
1. DVD disc indication  
2. VCD indication  
6. Play time indication  
7. Repeat indication  
8. MP3 disc indication  
9. PBC indication  
3. Playback indication  
4. Pause indication  
5. Disc Play indication  
10. Dolby Digital indication  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
Installing the Remote Control  
Batteries  
Notes on Using the Remote Control  
Notes on Remote Control – Continued  
Please note that a remote control should be  
pointed directly at the remote control sensor  
to get the better performance.  
e. If you do not use the remote control for a long period of time, remove the  
installed batteries from the remote control to avoid possible damage from the  
battery corrosion. If battery leakage occurs, clean the battery compartment and  
then insert the new batteries. Please follow the general safety and handling  
instructions listed by the battery manufacturer. After cleaning, wash your hand.  
2. Do not leave the remote control in an extremely hot or humid place.  
3. Do not spill water or put any liquid on the remote control.  
1. Open the battery compartment cover on  
the back of the remote control.  
4. Do not expose the remote control sensor of the DVD player to a strong light source, such  
as direct sunlight.  
5. The battery life is approximately one year under the normal working condition. However, it  
significantly depends on the battery type and its working condition. If the remote control  
doesn’t work or the signal gets weaker, replace the battery. The alkaline batteries are  
recommended for the longer battery life.  
2. Place two batteries as shown on the  
picture below. Make sure that the  
polarity (+/–) of battery matches the  
marks inside the battery compartment.  
You can help to protect the environment!  
Please do not throw the used batteries away and follow the local regulations for the  
proper disposal of the used batteries.  
Brief Instructions on Installing the DVD Player  
1. Locate the place where you want to install this unit.  
2. Refer to the quick connection guides starting on the following page to connect this unit to  
other audio or display devices. While installing this unit to other devices, the power cord of  
all devices in the installation process should be properly disconnected for the safety  
purpose.  
3. Close the battery compartment.  
3. Connect the power cord of all devices again. Before connecting the power cords, please  
carefully follow the safety instructions in the section of the user safety guide.  
4. After connecting the power cords, turn on this unit and all the attached devices.  
5. Before operating this unit, set the system settings of this unit and all the attached devices  
based on your choice of the connection. To properly show the video and audio contents,  
this unit and all the attached devices must be set with the correct system settings  
accordingly based on your choice of the connection. For this unit, refer to the detailed  
system setup instructions in this user’s manual. For the attached devices, refer to the  
detailed system setup instructions in their user’s manuals respectively.  
Notes on Remote Control  
1. Improper use of batteries may cause the battery leakage and corrosion. To operate the  
remote control correctly, follow the instructions below:  
a. Do not insert the batteries in the wrong direction.  
b. Do not attempt to recharge, short-circuit, disassembly, heat or throw the  
batteries into the fire.  
Special Notes  
1. If this unit is not going to be used for a long period of time, please disconnect the power  
cord plug from the outlet.  
2. This unit must be operated with the correct power supply corresponding to the marking  
label on the back of the unit.  
c. Do not leave the dead batteries in the remote control.  
d. Do not use or mix the different types of batteries or old and new batteries  
together.  
3. This unit may not be compatible with some specially encrypted discs.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
Connecting the DVD Player to a TV Set using an AV Cable  
Connecting the DVD Player to a TV using the Y / Pb / Pr Jacks  
Connect the FRONT RIGHT and FRONT  
Use a COMPONENT cable (not included) to  
connect the DVD player to your TV. Set the  
VIDEO OUT to COMPONENT. For Progressive  
LEFT audio cable from the DVD player to the  
TV  
Audio input jack on the TV.  
TV  
Scan, set to P-SCAN. COMPONENT and P-  
SCAN is transferred through the same jack. If  
your TV set supports P-scan function, set  
VIDEO OUT to P-SCAN. If not, set VIDEO OUT  
to COMPONENT.  
Note: When using HDMI, please change Digital Output to PCM.  
Connecting to an Amplifier  
with Digital Audio Input  
Connecting the DVD Player to a TV Set using S-Video  
.
Use an S-Video cable (not included) to  
1. Select the Coaxial digital output.  
2. Set the DVD player’s Audio Out to “Raw  
of “PCM.”  
connect the DVD player to your TV. Use  
“S-Video” setting on the Setup Menu.  
TV  
3. Set the digital amplifier to the AV input  
connected to the DVD player.  
Notes on the Connection Diagram  
1. You don’t need to connect all the video outputs  
even though your TV set supports all the  
connections. Choose and make the most  
appropriate video connection available on your  
TV. The S-VIDEO and the component VIDEO  
cables aren’t included in the package.  
2. The component VIDEO output is labeled as Y,  
Pr (or Cr), and Pb (or Cb), and these three  
component video output jacks must be all and  
properly connected to properly display the  
picture in the component video mode of your  
TV set.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
Navigating the Setup Menu  
Language Setup-continued  
Notes on the Connection Diagram – Continued  
3. After making the video connection of your choice, please ensure that your TV is in the  
proper mode as well. If you choose the component VIDEO connection, your TV must  
be in the component mode. If you choose the S-VIDEO connection, your TV must be in  
the S-VIDEO mode. Please refer to the user’s manual of your TV for the detailed mode  
setting.  
3. AUDIO LANG: Used to select the audio language. The correct performance of this option  
depends on the audio contents supported by a DVD. If you select a language, which isn’t  
supported by a DVD, this unit will use the default audio language of the DVD.  
4. Some TV sets use the different audio input for each video mode. Please refer to the  
user’s manual of your TV for the detailed setting information.  
Navigating the Setup Menu  
In the setup menu, there are setup pages categorized as following: LANGUAGE, VIDEO,  
AUDIO, and MISC. Each setup page is composed of the several setup options corresponding  
to each category.  
Language Setup  
4. DVD MENU: Used to choose the film’s menu language options. Follow the operating  
1. OSD LANGUAGE: Used to set the language for the On-Screen Display (OSD). This unit  
supports ENGLISH, GERMAN, SPANISH, and FRENCH.  
instructions in DVD MENU Setup in combination with the desired option  
Video Setup  
2. SUBTITLE LANG: Used to select the subtitle language. The correct performance of this  
option depends on the subtitle contents supported by a DVD. If you select a language,  
which isn’t supported by a DVD, this unit will use the default subtitle language of the DVD.  
1. ASPECT RATIO: Choose 4:3LB, 4:3PS, 16:9  
a. 4:3PS / 4:3LB: Choose this setting when your DVD player is connected to a normal  
ratio TV. If this aspect ratio is chosen and the entire TV screen is used, parts of the  
picture on the laft and right will be cut off.  
b. 16:9: Choose this setting if you have a wide screen TV. Choosing this aspect ratio  
on a standard screen may distort the images due to vertical compression.  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
GETTING STARTED  
Navigating the Setup Menu  
Navigating the Setup Menu  
Video Setup-continued  
Video Setup-continued  
Note: The aspect ratio depends on the recorded disc format. Some discs may not display  
images on the chosen aspect ratio. For example: if a disc recorded in 4:3 format is played on a  
wide screen TV, black bars will appear on the left and right sides of the screen. Please adjust  
the screen setting depending on both the type of TV and the recorded material on the disc.  
4. SMART PICTURE: Choose from the following options:  
a. Standard: default effect  
b. Bright: internal setting for bright view effect  
c. Soft: internal setting for soft view effect  
d. Dynamic: user adjusting of brightness, contrast, color, etc.  
2. TV SYSTEM: This DVD player supports various TV systems, including Multi, NTSC, and  
PAL. When a TV set has only NTSC or PAL systems, the screen may blink and become  
colorless when the wrong system is selected. For more information, please refer to the  
user’s manual for your TV set.  
Audio Setup  
1. DIGITAL OUTPUT: Provides for the control of the Audio Output on the S / PDIF ports to  
work together with any external audio equipment (ie. Receiver, speakers, etc.).  
a. OFF: Digital audio output is disabled  
3. VIDEO OUT: Select from S-VIDEO, COMPONENT, P-SCAN or HD (See connection  
instructions elsewhere in this manual.  
b. PCM: This option allows the use of stereo signals (2 channels). This option should be  
combined with the Lower sampling rate,  
c. RAW: This option allows for the use of the original audio track of the DVD to play.  
This option should only be chosen when Dolby Digital Ac3 signals are running  
through coaxial audio output.  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
GETTING STARTED  
OPERATIONAL INSTRUCTIONS  
STANDBY  
Navigating the Setup Menu  
Audio Setup-continued  
[STANDBY] Button  
Press the [STANDBY] button to turn on this unit. The main unit must be  
2. DOWN SAMPLING: Choose ON or OFF.  
connected to the power supply.  
a. ON: The system will decrease a sampling rate for high sampling rate audio (more  
than 96K).  
[0 – 9] Buttons  
b. OFF: Default. High sampling rate audio can be played  
These buttons are used to input the time, as well as title, chapter and track numbers.  
When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry,  
and press the [ENTER] button to confirm.  
When a VCD is playing (with PBC off), press the 0-9 keys to select a track directly.  
[W/S/X/T] DIRECTION Buttons  
Press the [DIRECTION] buttons to move the selected bar or cursor on any menu to your  
selection.  
[ENTER] Button  
Press the [ENTER] button to confirm your selection  
OPEN /  
CLOSE  
[OPEN/CLOSE] Button  
3. SMART SOUND: Select different music effects while listening to music.  
To eject the disc tray, press the [OPEN/CLOSE] button. To  
close the disc tray, press the [OPEN/CLOSE] again.  
PLAY/PAUSE  
[PLAY / PAUSE] Button  
Press the [PLAY/PAUSE] button to play back a disc in the stop  
X
 
mode. Press the [PLAY/PAUSE] button to resume the playback  
in the pause mode.  
STOP  
[STOP] Button  
While playing back a DVD, CD or VCD, press the [STOP] button once to  
stop the playback. To resume the playback at which you stopped, press  
4. MISC SETUP: Select MISC to reset the setup data to factory settings and re-load disc.  
the [PLAY] button. Press the [STOP] button twice in the playback mode to  
completely stop.  
FWD  
[XX] FWD Button  
While playing back a DVD, CD or VCD, press the [XX] button to play  
XX  
back the video or audio contents fast forward.  
Press the [PLAY] button to resume the normal playback.  
[WW] REV Button  
REV  
WW  
While playing back a DVD, CD or VCD, press the [WW] button to play  
back the video or audio contents fast backward.  
Press the [PLAY] button to resume the normal playback.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
OPERATIONAL INSTRUCTIONS  
OPERATIONAL INSTRUCTIONS  
PREV  
VOL  
[|WW] PREV Button  
[VOL] Buttons  
While playing back a DVD, CD or VCD, press the [|WW] button to skip to  
Press the [VOL +] button to increase the volume. Press the  
+
|WW  
the previous chapter or track.  
[VOL -] button to decrease the volume.  
MUTE  
[MUTE] Button  
Press the [MUTE] button to mute the audio output. To resume the normal  
NEXT  
[XX|] NEXT Button  
While playing back a DVD, CD or VCD, press the [XX|] button to skip to  
audio output, press the [MUTE] button again.  
the next chapter or track.  
XX|  
ZOOM  
[ZOOM] Button  
While playing back a DVD, press the [ZOOM] button to zoom in or out  
MENU  
[MENU] Button  
During DVD playback, press the [MENU] button to display the disc menu  
the image. This function differs depending on the type of disc.  
of the current title.  
ANGLE  
[ANGLE] Button  
While playing back a DVD, press the [ANGLE] button to view the scenes  
During VCD/SVCD playback, press the [MENU] button to control PBC  
ON/OFF.  
from the different camera angles. To go back to the normal playback,  
Note: This function is subject to the disc.  
press the [ANGLE] button repeatedly until the angle function is turned off. A DVD  
must support the different angle view to activate this function.  
A – B  
[A–B] Button  
During playback, press the [A-B] button to select point A, press it again to  
select point B. the player will repeat the section from A to B automatically.  
Press the [A-B] button a third time to cancel A-B repeat and clear points A  
and B.  
LANGUAGE  
[LANGUAGE] Button  
While playing back a DVD, press the [LANGUAGE] button to select an  
audio language or format. This function depends on the DVD.  
Notes: During CD/VCD/SVCD playback, points A and B must be within the same track. During  
DVD playback, points A and B can be selected from different chapters.  
[AUDIO] Button  
AUDIO  
During DVD/SVCD playback, press the [AUDIO] button to select different  
SLOW  
[SLOW] Button  
audio languages.  
During DVD, VCD or SVCD playback, press SLOW for slow motion  
playback. One you press SLOW, the disc will play at different speed.  
Press PLAY to resume normal playback.  
During VCD/CD/MP3 playback, the [AUDIO] button acts as L/R key to  
switch LEFT/RIGHT/MIX/STEREO.  
[SUBTITLE] Button  
SUBTITLE  
[TITLE] Button  
TITLE  
While playing back a DVD, press the [SUBTITLE] button to turn on the  
subtitle and to select the language for the subtitle. This function depends  
on the DVD.  
While playing back a DVD, press the [TITLE] button to display the DVD  
title menu or play back the first title when the DVD disc doesn’t support  
the title menu. This function depends on the disc type.  
STEP  
P/N  
[STEP] Button  
Press the [STEP] button to play the DVD/VCD one frame at a time.  
[REPEAT] Button  
Each press of the REPEAT button will change the repeat mode.  
REPEAT  
Press the [PLAY] button to resume normal playback.  
During VCD, CD playback, there are three modes: repeat Single, repeat  
ALL and Off.  
[P/N] Button  
During DVD, playback, there are three modes: Repeat Chapter, Repeat  
Press the [P/N] button to select the video signal format for your TV. Each  
press will change the video signal format as follows: PAL, AUTO, and  
NTSC. If you select a wrong video signal format, press the [P/N] button  
repeatedly until the image is displayed correctly on your TV screen.  
Title and OFF.  
Note: During VCD playback, the PBC mode must be set to Off  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
OPERATIONAL INSTRUCTIONS  
ADVANCED FEATURES  
[V-MODE] Button  
Playing MP3 / WMA CDs  
When an MP3 / WMA CD is loaded, a directory structure will display as shown here:  
V-MODE  
In the STOP/OPEN TRAY/NO DISC state, press the [V-MODE] button to  
change the video output format. This unit supports 3 different video output  
formats: Interlaced Video Output, Progressive-scan Video Output,  
and S-VIDEO output. If you select a wrong video output by a mistake,  
press the [V-MODE] button repeatedly until the TV screen shows correctly.  
[DISPLAY] Button  
DISPLAY  
GOTO  
While playing a DVD, press the [DISPLAY] button once to see the  
playback information. This function depends on the disc type.  
Press the [DISPLAY] button again to see other additional information.  
[GOTO] Button  
For DVDs, press this button to choose the desired title and chapter and  
search the desired title time and chapter time.  
For Super VCDs, VCDs, or CDs, press this button to search the desired  
disc time and track time and choose the desired track.  
Notes: During VCD playback, the PBC mode must be set to OFF.  
The function of this button depends on the disc type.  
CLEAR  
[CLEAR] Button  
Press the [CLEAR] button to delete numbers you have entered.  
[SETUP] Button  
SETUP  
Press the [SETUP] button to enter the setup mode. In the setup mode, you  
can set up the general system settings, video setting, audio settings,  
language settings, and speaker settings.  
[PROG] Button  
The Program playback option allows you to enter the order in which the chapters or tracks will  
Use the [W/S/T/X] buttons to choose the root directory and press the [ENTER] button enter  
the sub-directory. Press the [W/S/T/X] buttons to choose the desired track and press the  
[ENTER] or [PLAY] button to enjoy the music or movie.  
be played, up to 16 maximum.  
PROG  
1. Press the [PROG] button to display the Program Menu. The cursor  
will highlight the chapters or tracks.  
Use the [W/S/T/X] buttons and select the  
icon and press the [ENTER] button to return to  
the previous menu.  
2. Move the cursor to select and press the [ENTER] button to confirm.  
3. Press the [PLAY] button or use the [W / S / T / X] buttons to highlight the “PLAY” item  
and press the [ENTER] button. The chapters/tracks will play in the programmed order.  
4. During Program playback, if the [PROG] button is pressed, the programmed order and  
contents will display and playback will stop.  
Filter: Allows selecting the categories of files displayed in the browser list.  
This selection is done among the 3 categories: Audio, Photo and Video.  
Repeat: To switch different repeat playing mode  
Mode: Select different playing mode  
5. To resume normal playback, press the [STOP] or [PLAY].  
Normal: Shuffle mode is cancelled  
6. To clear programmed order, use the [W / S / T / X] buttons to highlight the “CLEAR”  
items and press the [ENTER] button to modify the programmed order.  
7. Use the [W / S / T / X] buttons to highlight the modifying items and enter the new  
chapter/track directly.  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
ADVANCED FEATURES  
CARE AND MAINTENANCE GUIDES  
Playing MP3 / WMA CDs-continued  
Handling a Disc  
Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track,  
playback jumps to a random chapter/track. As the end of each chapter/track is reached,  
another random chapter/track will be played until all tracks/chapters have been played or the  
Shuffle mode is cancelled by toggling to a different Mode Option  
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to  
contact with the shiny, unprinted side of the disc.  
Do not attach adhesive tape, stickers etc., to the disc label.  
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive  
cleaners to clean the disc. If necessary, use a CD or DVD cleaning kit.  
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged  
(scratched).  
Music Intro: In this mode, the media will play 10 seconds then skip to next track  
Edit Mode: To enable programmed playback mode. When you select the mode, press LEFT  
[W] Direction button to directory and press the [ENTER] button to choose the desired track and  
press Add to program to start program playback.  
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the  
disc. Never wipe in circular motions.  
Program view: Display program track  
Brower view: Display track directory  
To remove a disc from its storage case, press down on the centre of the case and lift the  
disc outs, holding it carefully by the edges.  
Add to program: To choose the track press Add to program to add the track of the program  
play directory.  
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft  
cloth. Unlike conventional records. compact disc have no groove to collect dust and  
microscopic debris, so gently wiping with a soft cloth should remove most particles.  
Clear program: In the complete stop state (press the [STOP] button twice), choose the track  
press Clear program to delete the track of the program play directory.  
Displaying Picture CDs  
A Picture CD has a director similar to the display below.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power source when  
cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,  
Use caution when cleaning and wiping the plastic parts.  
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or  
polish sprays on the cabinets.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft  
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or  
polishes as these will damage the finish of your unit.  
Use the [W / S / T/ X] buttons to choose the root directory, pressing the [ENTER] button to  
enter the sub-directory. Use the [W / S / T/ X] buttons to choose the desired picture and  
press the [ENTER] or [PLAY] buttons to view the picture.  
Caution: never allow any water or other liquids to get inside the unit while cleaning.  
To ROTATE the images use the [W / S / T/ X] buttons when in Picture Display mode. While  
in Picture Display mode, press the [ANGLE] button to change the picture scan mode.  
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
TROUBLESHOOTING GUIDE  
SPECIFICATIONS  
No picture or no sound  
General Specifications  
System  
Ensure whether the [POWER] button on the front panel is on.  
Ensure whether the power cord is connected properly.  
Ensure the power outlet is working.  
o
o
Video System: NTSC / PAL / AUTO  
Video Aspect Ratio: 16:9 / 4:3  
Power Requirement: AC 100V – 240V, 60Hz/50Hz  
Connectivity  
High Definition HDMI digital output  
Picture but no sound  
o
o
o
o
o
Component video outputs (Y / Cb / Cr)  
S-Video output  
Composite video output  
Coaxial digital audio output  
2-channel audio output  
Ensure the audio jacks are securely connected.  
Ensure the volume is turned up to the proper level.  
Ensure you have set the AUDIO settings correctly.  
Ensure you have connected the audio cable properly.  
Ensure the audio is not set to mute.  
Power Consumption: 15W  
Unit Dimensions ( W x H x D): Approx. 15.6” x 1.5” x 9.8” (320mm x 38mm x 250mm)  
Unit Weight: Approx. 4.6 lbs ( 2.1 kg)  
Sound but no picture  
Ensure the video jacks are securely connected.  
Ensure you have connected the video cable properly.  
Ensure you have set the VIDEO settings correctly.  
Poor picture or poor sound  
Ensure you have set the AUDIO and VIDEO settings correctly.  
Ensure the disc is not scratched or stained.  
The “Bad Disc” indication is displayed.  
Ensure the disc is not warped, damaged or deformed.  
Ensure the disc is not badly stained or damaged.  
Ensure the disc format is compatible with the player.  
The remote control isn’t working.  
Make sure the [POWER] button on the main unit is set on.  
Point the remote control directly at the remote control sensor on the main unit.  
Remove any obstacles between the remote control and the remote control sensor.  
Change the remote control batteries.  
The “No Disc” indication is displayed.  
Ensure you have loaded a disc.  
Ensure the disc is not upside down.  
Ensure the disc isn’t distorted, stained or scratched.  
* Specifications and features are subject to change without the prior notice. The weight and  
dimensions are approximate.  
The main unit is not working.  
Power off the main unit and turn it on again.  
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
HOME DVD PLAYER  
V10M10_IM_EN_12212007  
TEL: 516-626-7188  
FAX: 516-626-7105  
© 2008 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product  
enclosed herewith including design, shape or graphics, may be reproduced or transmitted in  
any form without the expressed written consent of jWIN Electronics Corp. by any means,  
electronic or mechanical, including photocopying, recording or use of an information storage  
and retrieval system. Any unauthorized distribution or reproduction of this printed material or  
product, or any portion there of, will be prosecuted to the fullest possible extent of the law.  
30  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intellinet Network Solutions Network Router 524537 User Manual
JVC Stereo Receiver RX 5022RSL User Manual
JVC TV DVD Combo KV AVX706 User Manual
Kenmore Gas Grill 1481615421 User Manual
Kenwood Car Video System KDC MP342U User Manual
Kenwood Home Theater System KR V990D User Manual
Kicker Speaker CVR10 User Manual
KitchenAid Refrigerator 2210725 User Manual
KitchenAid Ventilation Hood KWCU300LSS1 User Manual
Knoll Systems Projector HD225 User Manual