HOME DVD PLAYER
V10M10_IM_EN_08072006
DVD Player with 5.1Channel Audio Output and
Progressive Scan Feature
JD-VD509
INSTRUCTION MANUAL
Please read this manual carefully before operating and
save it for future reference.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
USER SAFETY GUIDE
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS – All the safety and operating instructions should be read before
IMPORTANT SAFETY INSTRUCTIONS – CONTINUED
14. CLEANING – The appliance should be cleaned with a dry cloth.
15. ATTACHMENTS – Only use attachments / accessories specified by the manufacturer.
16. DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service
professional when:
the appliance is operated.
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a
secure place for future reference.
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions
should be adhered to.
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.
c. The appliance has been exposed to rain or water.
4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.
5. WATER AND MOISTURE – The appliance should not be used near water. For example:
near a bathtub, kitchen sink, laundry tub, and/or swimming pool.
d. The appliance has been dropped and suffered damage.
e. The appliance does not appear to operate normally, or exhibits a change in
performance.
6. VENTILATION – The appliance should be situated so that its location and position does
not interfere with its proper ventilation. For example, the appliance should not be situated
on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be
placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of
air through the ventilation openings.
17. SERVICING – The user should not attempt to service the appliance beyond that described
in the user's operating instructions. All other servicing should be referred to qualified
service professional.
18. REPLACEMENT PARTS – When replacement parts are required, be sure the service
technician certifies in writing that he has used replacement parts specified by the
manufacturer that have the same characteristics as the original parts. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
7. HEAT – The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCES – The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance. If you are not
sure of the type of electrical power supplied to your home, consult your dealer or local
power company. For those sets designed to operate from battery power, refer to the
operating instructions.
19. SAFETY CHECK – Upon completion of any service or repairs to the set, ask the service
technician to perform routine safety checks (as specified by the manufacturer) to
determine that the set is in safe operating condition, and to so certify.
20. BATTERY USAGE – To prevent battery leakage, which may result in bodily injury,
property damage or damage to the unit, follow these instructions:
9. GROUNDING OR POLARIZATION – Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
a. Install all batteries correctly according to the polarity (+ -) as marked on the unit.
b. Do not mix old and new batteries, carbon and alkaline, etc.
c. Remove batteries from the unit when the device will not be used for an
extended period of time.
10. POWER CORD PROTECTION – Power supply cords should be routed so that they are
not likely to be walked on or obstructed by items placed upon or against them. Pay
particular attention to cords at plugs, convenience receptacles, and the point at which they
exit from the appliance.
21. LEAD AND MERCURY – This product may contain lead and/or mercury. Disposal of
these materials may be regulated by your local authorities due to environmental
considerations. For more detailed disposal or recycling information, please contact your
22. LIGHTING – During a lighting storm, unplug the power cord from the wall outlet and
disconnect the antenna. This will prevent damage to the device due to lighting and power-
line surges.
11. NONUSE PERIODS – The power cord of the appliance should be unplugged from the
outlet when the appliance is to be left unused for an extended period of time.
12. OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and
liquids are not spilled into the device’s openings.
23. OVERLOADING – Do not overload the wall outlets, extension cords, or convenience
receptacles beyond their capacity, since this can result in fire or electric shock. Always
turn this device off when it is not to be used. When this device is left unattended and
unused for the long period of time, unplug it from the wall outlet as a precaution against
the possibility of an internal malfunction that could create a fire hazard.
13. CARTS AND STANDS – The appliance should be used only with a
cart or stand that is recommended by the manufacturer. An appliance
and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
TABLE OF CONTENTS
TABLE OF CONTENTS
GETTING STARTED
OPERATING WITH A REMOTE CONTROL (CONTINUED)
Compatibility. …..………..…………………………………………………………………… 8
General features ………………………………………………………………………………9
Location of controls on the main unit ……………………………………………………… 10
Location of indications on the VFD screen …………………………………………………11
Location of controls on the remote control …………………………………………………11
Installing the remote control batteries ………………………………………………………12
Notes on using the remote control ………………………………………………………… 12
Brief instructions on installing the DVD player …………………………………………… 13
About the audio outputs …………………………………………………………………… 14
About the video outputs ………………………………………………………………………14
Connecting to a TV set with 2-channel audio input ……………………………………… 15
Connecting to an audio amplifier with digital audio input …………………………………16
Connecting to a TV set and an amplifier with 5.1-channel audio output ……………… 17
Preparing the unit and attached devices ………………………………………………… 18
Navigating the setup menu ……………………….…………………………………………18
About the system setup ……………………………………………………………………. 19
About the language setup …………………………………………………………………. 21
About the audio setup ……………………………………………………………………… 22
About the video setup ……………………………………………………………………… 23
About the speaker setup …………………………………………………………………… 24
About the digital setup ……………………………………………………………………… 25
[ZOOM] button ……………………………………………………………………………… 29
[ANGLE] button ………………………………………………………………………….. 29
[LANGUAGE] button …………………………………………………………………………30
[SUBTITLE] button ……………………………………………………………………………30
[P/N] button ………………………………………………………………………………..
30
[DIGEST] button ………………………………………………………………………….. 30
[MODE] button ……………………………………………………………………………… 30
[PBC] button ……………………………………………………………………………….. 30
[PSCAN/NORMAL] button ………………………………………………………………… 30
[DISPLAY] button ………………………………………………………………………….. 31
[TIME] button ………………………………………………………………………………… 31
[GOTO] button ………………………………………………………………………………. 32
[L/R] button ………………………………………………………………………………..
32
[RANDOM] button ………………………………………………………………………….. 33
[SETUP] button ……………………………………………………………………………… 33
[PROG] button ………………………………………………………………………………. 33
ADVANCED FEATURESNAL FEATURES
Playing MP3 CDs …………………………………………………………………………… 34
Using the microphones ………………………………………………………………………34
About Kodak Picture CDs ……………………………………………………………………34
OPERATING WITH A REMOTE CONTROL
CARE AND MAINTENANCE GUIDES
[STANDBY] button …………………………………………………………………………. 27
[0 -9, 10+] button ………………………………………………………………………….. 27
[OPEN/CLOSE] button ……………………………………………………………………… 27
[PLAY] button ……………………………………………………………………………….. 27
[PAUSE] button ………………………………………..……………………………………. 27
[STOP] button …………………………………….………………………………………… 27
[XX] button ………………………………………………………..………………………… 27
[WW] button ……………………………………………………………………………………28
[|WW] button ………………………………………………………………………….……… 28
[XX|] button ……………………………………………………………………………….. 28
[MENU] button ……………………………………………………………………………… 28
[A – B] button ………………………………………………………………………………… 28
[SLOW] button ………………………………………………………………………..…….. 28
[RETURN] button ………………………………………………………………………….. 29
[TITLE] button ………………………………………………………………………………. 29
[REPEAT] button ………………………………………………………………………….. 29
[VOL] button ………………………………………………………………………………… 29
[MUTE] button ………………………………………………………………………………. 29
Handling a disc ……………………………………………………………………………… 35
Cleaning the unit ……………………………………………………………………………. 35
TROUBLESHOOTING GUIDE ……………………………………………………................... 36
SPECIFICATIONS ……………….………………………………………………………………. 37
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
COMPATIBILITY
Thank you for purchasing JD-VD509. Unpack the unit and make sure all the accessories are
put aside so they will not be lost. We recommend that you retain the original carton and
packaging materials for future use, should you transport or ship the unit in the future.
DVD VIDEO
Multi-angle
Progressive-Scan DVD Player with 5.1Channel Audio Output
•
•
•
•
•
•
•
•
•
•
Capable of MPEG4 decoding
Capable of Dolby Digital decoding
Interlaced and progressive-scan video outputs
Coaxial digital audio output and 5.1 channel audio output
Multiple subtitle, angle, and audio functions
Programmed playback and zoom operation
Slow and fast motion playbacks
AUDIO CD
Subtitle choices
Audio choices
TV Aspect Ratio
MPEG4 VIDEO
Convenient OSD (On-Screen Display) and screen saver
Integrated two microphone jacks
MP3 CD
Playable Media: DVD / VCD / SVCD / MPEG4 CD / MP3 CD / JPEG CD / Audio CD /
Kodak Picture CD
In the Box
•
•
•
•
•
Main unit
Kodak Picture CD
Dolby® Digital
Remote control (battery included)
AV cable
Instruction manual
Warranty card
MPEG4
This product incorporates copyright protection technology that is protected by method claims of
certain U.S patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
ABOUT THE DISC ERROR
This compact disc player has built-in error compensation circuits to correct for minor defects in
a disc. There are limits, however, to the amount of correction available. In some cases, the
DVD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem
may be caused by defects (such as scratches) in the disc being played, which are too large for
the error compensation circuits to handle. If you encounter this problem, try a new disc before
having the unit serviced. If the DVD player operates normally, the skipping problem is probably
due to a defective disc.
The product complies with the Kodak Picture CD format and will display Kodak Picture CDs.
The “Kodak Picture CD Compatible” logo is a trademark of Eastman Kodak Company and is
used with the permission.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby
Laboratories, Inc. All rights reserved.
Note: Only the above types of discs can be played on this unit.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
Location of Controls on the Main Unit
Location of Indications on the VFD Screen
1
2
3
4
[Front Panel]
1
2
3 4
5
6 7 8 9
10
5
6
1. Power button
2. Disc loader
6. Play / Pause button
7. Stop button
1. DVD disc indication
4. Dolby Digital indication
5. Play / Pause indication
6. MP3 disc indication
3. Remote control sensor
4. Open / Close button
5. VFD screen
8. Prev. button
2. SVCD / VCD / CD disc indication
3. Playback information
9. Next button
10. Microphone jacks
Location of Controls on the Remote Control
[Rear Panel]
1. OPEN / CLOSE
17. STANDBY
1
17
2. Numeric keys
18. SUBTITLE
5
6 7 9 11 12
18
(0-9, 10+)
19. LANGUAGE
19
3. ZOOM
20. TITLE
2
4. SLOW
5. PAUSE
21. ANGLE
20
21
22
23
24
25
26
27
22. TIME
6. MENU
23. VOL + (Volume +)
24. VOL – (Volume –)
25. STOP
3
4
5
7. MOVE (W,S,T,X)
8. SETUP
6
7
8
9. REV (Reverse)
10. FWD (Forward)
11. A-B (Repeat A-B)
12. REPEAT
26. PLAY
1
2
3 4 8 10 13
27. DISPLAY
28. ENTER
28
29
1. Power cord
8. S-Video output
29. GOTO
9
30
31
32
33
34
35
36
37
2. Audio output for the subwoofer (SW)
9. Composite video output
13. PROG (Program)
14. P / N (PAL / NTSC)
15. DIGEST
30. NEXT
10
11
12
13
14
15
16
3. Audio output for the rear right speaker (SR)
4. Audio output for the front right speaker (FR)
5. Audio output for the center speaker (CEN)
6. Audio output for the rear left speaker (SL)
7. Audio output for the front left speaker (FL)
10. Component video output (Pb/Cb)
11. Component video output (Y)
12. Component video output (Pr/Cr)
13. Coaxial digital audio output
31. PREV (Previous)
32. RETURN
33. MUTE
16. L / R (Audio L /
Audio R)
34. RANDOM
35. PBC
36. PSCAN/NORMAL
37. MODE
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
Installing the Remote Control
Batteries
Notes on Using the Remote Control
Notes on Remote Control – Continued
Please note that a remote control should be
pointed directly at the remote control sensor
to get the better performance.
e. If you do not use the remote control for a long period of time, remove the
installed batteries from the remote control to avoid possible damage from the
battery corrosion. If battery leakage occurs, clean the battery compartment and
then insert the new batteries. Please follow the general safety and handling
instructions listed by the battery manufacturer. After cleaning, wash your hand.
2. Do not leave the remote control in an extremely hot or humid place.
3. Do not spill water or put any liquid on the remote control.
1. Open the battery compartment cover on
the back of the remote control.
4. Do not expose the remote control sensor of the DVD player to a strong light source, such
as direct sunlight.
5. The battery life is approximately one year under the normal working condition. However, it
significantly depends on the battery type and its working condition. If the remote control
doesn’t work or the signal gets weaker, replace the battery. The alkaline batteries are
recommended for the longer battery life.
2. Place two “AAA” batteries as shown on
the picture below. Make sure that the
polarity (+/–) of battery matches the
marks inside the battery compartment.
You can help to protect the environment!
Please do not throw the used batteries away and follow the local regulations for the
proper disposal of the used batteries.
Brief Instructions on Installing the DVD Player
1. Locate the place where you want to install this unit.
2. Refer to the quick connection guides starting on the following page to connect this unit to
other audio or display devices. While installing this unit to other devices, the power cord of
all devices in the installation process should be properly disconnected for the safety
purpose.
3. Close the battery compartment.
3. Connect the power cord of all devices again. Before connecting the power cords, please
carefully follow the safety instructions in the section of the user safety guide.
4. After connecting the power cords, turn on this unit and all the attached devices.
5. Before operating this unit, set the system settings of this unit and all the attached devices
based on your choice of the connection. To properly show the video and audio contents,
this unit and all the attached devices must be set with the correct system settings
accordingly based on your choice of the connection. For this unit, refer to the detailed
system setup instructions in this user’s manual. For the attached devices, refer to the
detailed system setup instructions in their user’s manuals respectively.
Notes on Remote Control
1. Improper use of batteries may cause the battery leakage and corrosion. To operate the
remote control correctly, follow the instructions below:
a. Do not insert the batteries in the wrong direction.
b. Do not attempt to recharge, short-circuit, disassembly, heat or throw the
batteries into the fire.
Special Notes
1. If this unit is not going to be used for a long period of time, please disconnect the power
cord plug from the outlet.
2. This unit must be operated with the correct power supply corresponding to the marking
label on the back of the unit.
c. Do not leave the dead batteries in the remote control.
d. Do not use or mix the different types of batteries or old and new batteries
together.
3. This unit may not be compatible with some specially encrypted discs.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
About the Audio Outputs
Connecting to a TV Set with 2-Channel Audio Input
This unit supports the three-way audio connection: 2-channel (stereo) audio connection, 5.1-
channel surround audio connection, and digital coaxial audio connection. If you plan to connect
this unit directly to your 2-channel audio or video device, you only need to connect the audio
cable to the FL (Front Left) and FR (Front Right) audio output jacks on the back of this unit. If
you have a home speaker system supporting the 5.1-channel surround sound or coaxial digital
audio input, you need to use all the 5.1-channel audio jacks or the coaxial digital audio output.
Please note that the 5.1-channel audio cables and the coaxial digital audio cable are not
included in the package.
See the notes below for
the video connection.
Analog Audio Outputs
Digital Audio Output
This unit supports the digital audio
output to the external audio
system through the coaxial audio
cable.
•
For the 2-channel audio output, two
connectors, FL and FR, are used only.
For the 5.1-channel audio output, all
connectors are used.
•
VIDEO IN
Y
Pr
VIDEO IN
Pb
S-VIDEO
VIDEO
Composite Video and S-VIDEO Outputs
Component Video Output
The component video output (Y /
Pr / Pb) gives you the best video
quality, comparing to the video
quality of the S-VIDEO and the
composite VIDEO outputs.
•
The composite VIDEO output is just
good enough to watch a movie on the
small TV sets.
The S-VIDEO (Separate Video) output
gives you better video quality than the
composite video output.
AUDIO IN
•
R
L
About the Video Outputs
This unit also supports the three-way video connection: composite VIDEO connection, S-
VIDEO connection, and component VIDEO connection. The component video output gives you
the best video quality among three connections. The S-VIDEO output gives you the better
video quality than the composite video output. The composite video output gives you the good
video quality just enough to watch your movie on the small TV sets. Thus, it is not necessary to
make all the video connections. Just choose and make one of the video connections available
on your TV or display device. Please note that the S-VIDEO and component VIDEO cables are
not included in the package.
Notes on the Connection Diagram
1. You don’t need to connect all the video outputs even though your TV set supports all the
connections. Choose and make the most appropriate video connection available on your
TV. The S-VIDEO and the component VIDEO cables aren’t included in the package.
2. The component VIDEO output is labeled as Y, Pr (or Cr), and Pb (or Cb), and these three
component video output jacks must be all and properly connected to properly display the
picture in the component video mode of your TV set.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
Connecting to a TV set and an Amplifier with 5.1-Channel Audio Input
Notes on the Connection Diagram – Continued
3. After making the video connection of your choice, please ensure that your TV is in the
proper mode as well. If you choose the component VIDEO connection, your TV must be in
the component mode. If you choose the S-VIDEO connection, your TV must be in the S-
VIDEO mode. Please refer to the user’s manual of your TV for the detailed mode setting.
4. Some TV sets use the different audio input for each video mode. Please refer to the user’s
manual of your TV for the detailed setting information.
Connecting to an Audio Amplifier with Digital Audio Input
VIDEO IN
Y
Pr
Pb
COAXIAL
CEN SW
SR
SL
FR
FL
Digital Audio Amplifier
Coaxial Audio Input
5.1CH AUDIO INPUTS
Notes on the Connection Diagram
Some audio amplifiers or TV sets support the coaxial digital audio input. If you have such an
audio device, you can connect this unit to the device with the coaxial digital audio connection.
The coaxial digital audio connection can allow a device to deliver the higher quality of audio to
another audio device with the minimum loss. There are two options regarding to the coaxial
digital audio connection. If your audio device has the capability of Dolby Digital decoding, this
unit can send the digital audio contents in the RAW format to the audio device. The audio
contents in the RAW format are the digital audio contents before decoding the digital audio
contents. If your audio device doesn’t have the capability of Dolby Digital decoding, this unit
can also send the digital audio contents in the PCM format. The digital audio contents in the
PCM format are the audio contents after decoding the audio content. Your audio device must
be in the coaxial audio input mode. Please refer to the user’s manual of your audio device for
the detailed instructions. The coaxial digital audio cable is not included in the package.
Notes on the Connection Diagram
1. You can also use the composite VIDEO connection or S-VIDEO connection for the video
display instead of the component VIDEO connection described on the connection diagram
above. The component VIDEO and 5.1-channel audio cables aren’t included in the
package.
2. Your TV set and 5.1-channel audio amplifier must be in the correct video or audio mode.
Please refer to the user’s manual of your TV and the 5.1-channel audio amplifier for the
detailed installation instructions.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
Preparing the Unit and Attached Devices
About the System Setup
After all the hardware connections are done, you can now connect the power cord of this unit
and the attached devices. Please take a special caution while connecting the power cords to
the outlet, and carefully read and follow the instructions in the user safety guide section in this
manual while connecting power cords. After connecting the power cords, turn on this unit by
pressing the [POWER] button on the main unit or the [STANDBY] button on the remote control.
Also, turn on all the attached devices. This unit and all the attached devices must be
appropriately set with the proper mode and channel settings based on your choice of
connections. For the system setup of this unit, please read and follow the instructions below.
For the system setup of the attached devices, please refer to their user’s manual.
The system setup menu is composed of the following setup options: TV SYSTEM, SCREEN
SAVER, VIDEO, TV TYPE, and DEFAULT.
1. TV SYSTEM: Used to set the video output according to your TV system.
a. AUTO: When this option is selected, the video signal format will depend on the
DVD recording format. If a DVD disc is recorded with the PAL TV format, this
unit will automatically output the AV signal in the PAL format. To watch a movie
correctly, your TV must support the PAL format. If a DVD disc is recorded with
the NTSC TV format, this unit will automatically output the AV signal in the
NTSC format. To watch a movie correctly, your TV must support the NTSC
format.
Navigating the Setup Menu
b. NTSC: When this option is selected, the video signal format will no longer
depend on the disc format. Regardless of the DVD recording type, this unit will
output the AV signal in the NTSC format. To watch a movie correctly, your TV
must support the NTSC format.
In the setup menu, there are 6 setup pages categorized as followings: SYSTEM, LANGUAGE,
AUDIO, VIDEO, SPEAKER, and DIGITAL. Each setup page is composed of the several setup
options corresponding to each category.
1. Turn on the main unit by pressing the [POWER] button
on the main unit or [STANDBY] button on the remote
c. PAL: When this option is selected, the video signal format will no longer depend
on the disc format. Regardless of the DVD recording type, this unit will output
the AV signal in the PAL format. To watch a movie correctly, your TV must
support the PAL format. There are several PAL types such as PAL-N, PAL-M,
PAL-G, PAL-B, PAL-I, and so on. Thus, please check the technical
specifications for which type of PAL your TV set supports. This unit supports
PAL443 only.
control if it is off.
2. Press the [SETUP] button on the remote control. The
setup menu will appear on your TV screen.
3. Use the [W / S / T / X] buttons and the [ENTER] button
on the remote control to navigate the setup menu. For an
example, if you want to set the brightness level in the video setup page, press the [X]
button to highlight the video icon, and then press the [T] button to select the
“BRIGHTNESS” option. After that, press the [ENTER] or [X] button to confirm your
selection. By now, you can see the setting values of the brightness. Using the [S / T]
buttons, you can select the value you want and confirm the selected value by pressing the
[ENTER] button.
2. SCREEN SAVER: Used to protect the TV screen from the afterimage damage by the non-
moving image.
a. ON: If it is set on, this unit will show the logo moving around on the screen when
the system is idle for a certain time of period.
b. OFF: If it is set off, this unit will not enter the screen saver mode even if the
system is idle for a long time.
4. Select the “EXIT SETUP” option using the [W / S / T / X] buttons, and then press the
[ENTER] button to exit the setup menu. Or you can exit the setup menu by pressing the
[SETUP] button.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
About the System Setup – Continued
About the System Setup – Continued
5. DEFAULT: Used to reset all the custom settings to
the factory settings.
3. VIDEO: Used to select the video format according to your choice of the video connection.
a. INTERLACE–YUV: Select this option if you made the component VIDEO
connection between this unit and your TV, but your TV doesn’t support the
progressive-scan video format.
a. RESTORE: Select this option when you
want to restore the factory settings.
When you select this option, all your
custom settings will be replaced by the
factory default settings. This option also
can be used when your unit doesn’t
seem to work properly.
b. P-SCAN YPBPR: Select this option if you made the component VIDEO
connection between this unit and your TV and your TV support the progressive-
scan video format. Please note that if your TV doesn’t support the progressive-
scan video format, the video will not display on your TV correctly. Refer to the
user’s manual of your TV to check whether your TV supports the progressive-
scan video format before selecting this option.
c. S-VIDEO: Select this option if you made the composite VIDEO connection or S-
VIDEO connection between this unit and your TV.
6. EXIT SETUP: Used to exit the setup menu.
About the Language Setup
The language setup menu is composed of the following setup options: OSD LANGUAGE,
AUDIO LANG, SUBTITLE LANG, and MENU LANG.
1. OSD LANGUAGE: Used to set the language for the On-Screen Display (OSD). This unit
supports ENGLISH, GERMAN, SPANISH, FRENCH, PORTUGUESE, and ITALIAN.
4. TV TYPE: Used to set the movie aspect ratio according to the TV screen aspect ratio.
a. 4:3 PS: Select this option when the aspect ratio of your TV screen is 4:3. When
this option is selected, the displayed movie will retain the originally intended
aspect ratio, but the image beyond the TV screen aspect ratio will be cut due to
the TV screen size. One advantage of this setting is that you can see the movie
with the full screen using the Pan-and-Scan technology.
b. 4:3 LB: Select this option when the aspect ration of your TV screen is 4:3.
When this option is selected, the movie will be shown on the TV screen with the
original movie aspect ration, but the size of the displayed image will be reduced
to fit into the TV screen. If the aspect ratio of the movie is 16:9, but the TV
screen aspect ratio is 4:3, you will see the black bar on the top and on the
bottom of the screen. One advantage of this option is that you can watch the
movie without missing any portion of the image on the movie intended by a
movie maker.
2. AUDIO LANG: Used to select the audio language. The correct performance of this option
depends on the audio contents supported by a DVD disc. If you select a language, which
isn’t supported by a DVD disc, this unit will use the default audio language of the DVD disc.
3. SUBTITLE LANG: Used to select the subtitle
language. The correct performance of this option
depends on the subtitle contents supported by a
DVD disc. If you select a language, which isn’t
supported by a DVD disc, this unit will use the
default subtitle language of the DVD disc.
c. 16:9: Select this option when your TV screen supports the screen aspect ratio
of 16:9. If you select this option, the aspect ratio of the movie is 16:9, and the
aspect ratio of your TV screen is 16:9, you can watch the movie on the full and
wide screen without the black bar on the top and bottom of the TV screen and
without any missing portion of images on the screen.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
About the Language Setup – Continued
4. MENU LANG: Used to select the menu language
of a DVD disc. The correct performance of this
option depends on the menu language supported
by a DVD disc. If you select a language, which
isn’t supported by a DVD disc, this unit will use the
default subtitle language of the DVD disc.
About the Audio Setup – Continued
4. ECHO: Used to adjust the echo level.
5. EXIT SETUP: Used to exit the setup menu.
About the Audio Setup
The audio setup menu is composed of the following setup options: AUDIO OUT, MIC SETUP,
5. MIC VOL: Used to adjust the microphone volume level.
KEY, ECHO, and MIC VOL.
6. EXIT SETUP: Used to exit the setup menu.
1. AUDIO OUT: Used to turn on or off the S/PDIF
feature. The word “S/PDIF” is short for “Sony /
Phillips Digital Interface Format” and it is used to
output the digital audio contents to the external
audio device.
About the Video Setup
The video setup menu is composed of the following setup options: BRIGHTNESS, CONTRAST,
HUE, SATURATION, and SHARPNESS.
a. SPDIF/OFF: Select this option to turn off
this S/PDIF. When it is selected, the
1. BRIGHTNESS: Used to adjust the brightness of a movie.
digital output will be disabled.
b. SPDIF/RAW: Select this option to
deliver the raw digital audio contents to the external audio device if the device
has the capability of Dolby Digital decoding.
c. SPDIF/PCM: Select this option to deliver the digital audio contents in the PCM
format to the external audio device if the device doesn’t have the capability of
Dolby Digital decoding but have the capability of PCM decoding.
2. MIC SETUP: When this option is set to “AUTO”, this unit detects the installed microphone
automatically and enables the microphone function.
2. CONTRAST: Used to adjust the contrast of a movie.
3. HUE: Used to adjust the hue level of a movie.
3. KEY: Used to adjust the sound key (or tone).
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
GETTING STARTED
About the Video Setup – Continued
About the Speaker Setup – Continued
4. SATURATION: Used to adjust the color saturation of a movie
3. CENTER DELAY: Used to adjust the time delay of the sound output for the center
speaker.
5. SHARPNESS: Used to adjust the sharpness of a movie
4. REAR DELAY: Used to adjust the time delay of the sound output for the rear speakers.
6. EXIT SETUP: Used to exit the setup menu.
5. BASS MODE: Used to adjust the bass sound level by the installed speaker types and
their arrangement.
About the Speaker Setup
The speaker setup menu is composed of the following setup options: DOWNMIX,
a. ALL LG SPK: Select this option if all
speakers are large.
SUBWOOFER, CENTER DELAY, REAR DELAY, and BASS MODE.
b. ALL SM SPK: Select this option if all
speakers are small.
1. DOWNMIX: Used to set the sound characteristics based on the audio connection, which
you made while installing this unit.
c. MIXED SPK: Select this option if the
installed speakers are mixed with the
large and small sizes of speakers.
a. LT / RT: Select this option if you made the 2-channel audio connection.
b. STEREO: Select this option if you made the 2-channel audio connection,
especially to a TV set.
6. EXIT SETUP: Used to exit the setup menu.
c. VSS: Select this option if you made the 2-channel audio connection but want to
listen to the soundtrack effects, down-mixed from the 5.1-channel surround
sound, from the stereo audio speakers. The term “VSS” is short for “Virtual
Surround Sound”.
About the Digital Setup
The digital setup menu is composed of the following setup options: OP MODE, DYNAMIC
d. 5.1 CH: Select this option if you made the 5.1-channel audio connection.
RANGE, and DUAL MONO.
1. OP MODE: Used to change the audio output level.
a. LINE OUT: Select this option to output
the audio as a line-level sound signal. If
the connected audio device has the
direct AV input, it is better to select this
option.
b. RF REMOD: Select this option to output
the audio sound with the higher sound
level. This option is more suitable to
2. SUBWOOFER: Used to turn on or off the sound channel for the subwoofer. If this unit is
connect this unit to a TV set, which doesn’t have a direct AV input, in order to
increase the sound level.
connected to a subwoofer, you can set this option on to enhance the bass sound.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
GETTING STARTED
OPERATING WITH A REMOTE CONTROL
STANDBY
About the Digital Setup – Continued
[STANDBY] Button
2. DYNAMIC RANGE: Used to lower the volume to avoid an annoying trembling sound
Press the [STANDBY] button to turn on this unit. The main unit must be
without changing the original tone when the “LINE OUT” option is selected above.
connected to the power supply.
[0 – 9, 10+] Buttons
The [0 – 9, 10+] buttons are used to enter the time, title, chapter, or track number in a certain
mode. For the number over 10, use the [10+] button with the single numeric buttons.
OPEN /
CLOSE
[OPEN/CLOSE] Button
To eject the disc tray, press the [OPEN/CLOSE] button. To
close the disc tray, press the [OPEN/CLOSE] again.
3. DUAL MONO: Used to select the way of the audio output when this unit is connected to a
2-channel audio device.
PLAY
[PLAY] Button
Press the [PLAY] button to play back a disc in the stop mode.
a. STEREO: Select this option to listen to a sound in the stereo format.
b. MONO L: Select this option to listen to a sound such as the only left-channel
mono sound
X
Press the [PLAY] button to resume the playback in the pause
c. MONO R: Select this option to listen to a sound as the only right-channel mono
sound.
mode.
d. MIX MONO: Select this option to listen to a sound as the mixed (left-and-right
channel) mono sound.
PAUSE
[PAUSE] Button
While playing back a DVD or CD disc, press the [PAUSE] button to
ꢀ
4. EXIT SETUP: Used to exit the setup menu.
pause. To resume the playback, press the [PLAY] button.
STOP
[STOP] Button
While playing back a DVD or CD disc, press the [STOP] button to stop
„
the playback. It will remember the stop position until the disc is ejected,
the [STOP] button is pressed once more, or the unit is turned off. To resume
the playback at which you stopped, press the [PLAY] button. Press the [STOP] button twice in
the playback mode to completely stop. This unit will not remember the stop position at this time.
FWD
[XX] Button
While playing back a DVD or CD disc, press the [XX] button to play back
XX
the video or audio contents fast forward. Each press will change the
playback speed as follows:
XXX2 B XXX4 B XXX8 B XXX20 B XXX2
Press the [PLAY] button to resume the normal playback.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
OPERATING WITH A REMOTE CONTROL
OPERATING WITH A REMOTE CONTROL
REV
RETURN
[WW] Button
[RETURN] Button
While playing back a DVD or CD disc, press the [WW] button to play back
the video or audio contents fast backward. Each press will change the
playback speed as follows:
While playing back a DVD disc or VCD2.0 disc with the PBC menu, press
WW
the [RETURN] button to return to the menu screen.
TITLE
[TITLE] Button
WWX2 B WWX4 B WWX8 B WWX20 B WWX2
While playing back a DVD disc, press the [TITLE] button to display the
DVD title menu or play back the first title when the DVD disc doesn’t
support the title menu. This function depends on the disc type.
Press the [PLAY] button to resume the normal playback.
PREV
[|WW] Button
REPEAT
[REPEAT] Button
While playing back a DVD or CD disc, press the [|WW] button to skip to
|WW
the previous chapter or track.
While playing back a DVD or CD disc, press the [REPEAT] button to set
this unit to repeatedly play back a single track, a single chapter, a single
title, or a whole disc. Each press will change the repeating option. To turn
NEXT
[XX|] Button
off the repeat function, press the [REPEAT] button until you see the indication “REPEAT OFF”
While playing back a DVD or CD disc, press the [XX|] button to skip to
on the screen.
the next chapter or track.
XX|
VOL
[VOL] Buttons
MENU
A – B
Press the [VOL +] button to increase the volume. Press the
[MENU] Button
While playing back a DVD disc, press the [MENU] button to return to the
–
+
[VOL -] button to decrease the volume.
disc menu screen. This function depends on the disc type.
MUTE
[MUTE] Button
Press the [MUTE] button to mute the audio output. To resume the normal
[A – B] Button
audio output, press the [MUTE] button again.
While playing back a DVD disc, press the [A – B] button to select Point A,
and then, after some time later, press it again to select Point B. This unit
will play the section from A to B repeatedly. Press the [A – B] button
again to clear the memorized point and cancel this function.
ZOOM
[ZOOM] Button
While playing back a DVD disc, press the [ZOOM] button to zoom in or
out the image. Each press will change the zooming ratio as follows:
Note: While playing back a CD disc, both Point A and Point B must be within the same track.
During the DVD playback, Point A and Point B can be selected from different chapters. This
function depends on the disc type.
ZOOM 2 B ZOOM 3 B ZOOM 4 B ZOOM 1/2 B ZOOM 1/3 B ZOOM 1/4 B ZOOM OFF
(Normal Playback)
SLOW
[SLOW] Button
ANGLE
[ANGLE] Button
Press the [SLOW] button to play back the video or audio contents slowly.
While playing back a DVD disc, press the [ANGLE] button to view the
Each press will change the playback speed as follows:
scenes from the different camera angles. To go back to the normal
playback, press the [ANGLE] button repeatedly until the angle function is turned off.
A DVD disc must support the different angle view to activate this function.
Normal Playback B 1/2 B 1/3 B 1/4 B 1/5 B 1/6 B 1/7 B Normal Playback
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
OPERATING WITH A REMOTE CONTROL
OPERATING WITH A REMOTE CONTROL
LANGUAGE
DISPLAY
[LANGUAGE] Button
[DISPLAY] Button
While playing back a DVD disc, press the [LANGUAGE] button to select
While playing a DVD disc, press the [DISPLAY] button once to see the
an audio language or format. This function depends on a DVD disc.
playback information. This function depends on the disc type.
SUBTITLE
[SUBTITLE] Button
Disc type
Current title
Total number of titles
Playback time
Total number of chapters
Current chapter
While playing back a DVD disc, press the [SUBTITLE] button to turn on
the subtitle and to select the language for the subtitle. This function
depends on a DVD disc.
P/N
[P/N] Button
Press the [P/N] button to select the video signal format for your TV. Each
press will change the video signal format as follows: PAL, AUTO, and
NTSC. If you select a wrong video signal format, press the [P/N] button
repeatedly until the image is displayed correctly on your TV screen.
Press the [DISPLAY] button again to see other additional information.
Audio language
Audio type
Angle setting
Subtitle language
DIGEST
[DIGEST] Button
While playing back a VCD disc, press the [DIGEST] button to watch video
tracks or segments in the thumbnail viewing mode. This function works
only with a VCD in the “PBC OFF” mode.
MODE
[MODE] Button
Press the [MODE] button to change the video output format. This unit
supports 3 different video output formats: Interlaced Video Output,
Progressive-scan Video Output, and S-VIDEO output. If you select a
TIME
[TIME] Button
wrong video output by a mistake, press the [MODE] button repeatedly until the TV screen
shows correctly.
While playing back a DVD disc, press the [TIME] button once to see the
playback time information. This function depends on the disc type.
PBC
[PBC] Button
This button is used to control the playback of a VCD2.0 or SVCD disc.
Press the [PBC] button to de-activate this function. Press it again to
activate this function.
Disc type
Current title
Total number of titles
Playback time
Total number of chapters
Current chapter
PSCAN /
NORMAL
[PSCAN/NORMAL] Button
Press the [PSCAN/NORMAL] button to change from the interlaced video
output to the progressive video output or vise versa. For the progressive
scan mode, this unit must be connected to your TV with the component
video cable.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
OPERATING WITH A REMOTE CONTROL
OPERATING WITH A REMOTE CONTROL
RANDOM
[TIME] Button – Continued
[RANDOM] Button
Press the [TIME] button again to see the remaining playback time.
Press the [RANDOM] button to play back video or audio contents in the
random order.
SETUP
PROG
Current title
Total number of titles
[SETUP] Button
Remaining playback time
Press the [SETUP] button to enter the setup mode. In the setup mode,
you can set up the general system settings, video setting, audio settings,
language settings, and speaker settings.
Total number of chapters
Current Chapter
[PROG] Button
Using this button, you can program the tracks and chapters in your
desired order. While playing back a DVD or CD disc, press the [PROG]
button to enter to the program mode. The program submenu will appear
on your TV screen. You can set the program list up to 16 tracks or chapters.
GOTO
[GOTO] Button
While playing back a DVD disc, press the [GOTO] button to skip to a
certain point in the movie. In this mode, you can skip directly to a certain
title, chapter, or time. To select the chapter, title, or time field in the
•
For CD, VCD, or SVCD
information bar on the top of the screen, use the [W] or [X] button. After selecting the chapter,
title, or time position, enter the title number, chapter number or time, where you wish to skip, by
using the numeric buttons [0 – 9, 10+]. Then, press the [ENTER] button to confirm your input.
The function of this button depends on the disc type.
Input the track number in the preferred order up to 16 tracks using the numeric buttons [0
– 9] buttons and [10+] button. To clear all the programmed tracks, select the “Clear” option,
using the [W / S / T / X] buttons. Then, press the [ENTER] button. When you finish
programming, select the “Play” option, using the [W / S / T / X] buttons. Then, press the
[ENTER] button to start the playback.
•
For DVD
Input the title number and chapter number in the preferred order up to 16 chapters using
the numeric buttons [0 – 9] buttons and [10+] button. To clear all the programmed
chapters, select the “Clear” option, using the [W / S / T / X] buttons. Then, press the
[ENTER] button. When you finish programming, select the “Play” option, using the [W / S
/ T / X] buttons. Then, press the [ENTER] button to start the playback.
Title Field
Time Field
Total number of titles
Total number of chapters
Chapter Field
L/R
[L/R] Button
While playing back a SVCD, VCD, or CD disc, press the [L/R] button to
set the audio format. You can set the audio format to one of the following
options: Stereo, Mono L, Mono R, and Mixed Mono.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
ADVANCED FEATURES
CARE AND MAINTENANCE GUIDES
Playing MP3 CDs
Handling a Disc
When a MP3 CD is loaded, you will see the special screen for the MP3 file display as below:
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to
contact with the shiny, unprinted side of the disc.
•
•
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD or DVD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged
(scratched).
Currently selected
Current directory
MP3 file name
•
•
•
•
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the
disc. Never wipe in circular motions.
Playback status
indication
To remove a disc from its storage case, press down on the centre of the case and lift the
disc outs, holding it carefully by the edges.
Select this button to
Select this button to
list the MP3 files when
list the JPEG files
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft
cloth. Unlike conventional records. compact disc have no groove to collect dust and
microscopic debris, so gently wiping with a soft cloth should remove most particles.
a disc contains other
when a disc contains
types of files, such as
other types of files,
JPEG files.
such as MP3 files.
Use the [W, S, T, X] buttons to select a MP3 file when the cursor appears in the file window.
Then, press the [PLAY] or [ENTER] button to play back the selected file.
Notes: The unit might not function correctly under the following conditions:
1. The loaded disc is badly scratched, damaged or dirty.
2. The disc isn’t finalized.
Cleaning the Unit
3. The recording format is not supported by this unit.
•
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
Using the Microphones
1. Insert your microphone to the microphone jack on the front panel of this unit.
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinets.
2. Load the DVD or VCD disc.
3. Press the [L/R] button on the remote control to select the right or left channel.
4. Play and enjoy your song with your microphones.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
About Kodak Picture CDs
A Kodak Picture CD has the same size as a regular audio CD, and it can be ordered at the
Caution: never allow any water or other liquids to get inside the unit while cleaning.
photo shop where provides a service to make a Kodak Picture CD for you.
Notes: This unit supports up to the resolution of 3840 x 3840.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
TROUBLESHOOTING GUIDE
SPECIFICATIONS
No picture or no sound
General Specifications
•
•
•
Ensure whether the [POWER] button on the front panel is on.
Ensure whether the power cord is connected properly.
Ensure the power outlet is working.
•
•
•
•
•
•
•
Power Requirements: AC: 100V-240V, 60Hz/50Hz
Power Consumption: 15W
Signal System: NTSC / PAL
Frequency Response: 20Hz – 20kHz
S/N Ratio: < 90dB
Picture but no sound
•
•
•
•
•
Ensure the audio jacks are securely connected.
Ensure the volume is turned up to the proper level.
Ensure you have set the AUDIO settings correctly.
Ensure you have connected the audio cable properly.
Ensure the audio is not set to mute.
Total Harmonic Distortion: < 0.0025%
Unit Weight: 1.93kg (4.3 lbs)
Connectivity
•
Video
o
Composite Video Output
S-VIDEO Output
Sound but no picture
o
o
•
•
•
Ensure the video jacks are securely connected.
Ensure you have connected the video cable properly.
Ensure you have set the VIDEO settings correctly.
Component Video Output (Y, Pb, Pr)
•
Audio
o
o
o
5.1-Channel Audio Output (can be used as 2-Channel Audio Output)
Coaxial Digital Audio Output
Poor picture or poor sound
Microphone Jacks x 2
•
•
Ensure you have set the AUDIO and VIDEO settings correctly.
Ensure the disc is not scratched or stained.
The “Bad Disc” indication is displayed.
•
•
•
Ensure the disc is not warped, damaged or deformed.
Ensure the disc is not badly stained or damaged.
Ensure the disc format is compatible with the player.
The remote control isn’t working.
•
•
•
•
Make sure the [POWER] button on the main unit is set on.
Point the remote control directly at the remote control sensor on the main unit.
Remove any obstacles between the remote control and the remote control sensor.
Change the remote control batteries.
The “No Disc” indication is displayed.
•
•
•
Ensure you have loaded a disc.
Ensure the disc is not upside down.
Ensure the disc isn’t distorted, stained or scratched.
The main unit is not working.
Power off the main unit and turn it on again.
•
* Specifications and features are subject to change without the prior notice. The weight and
dimensions are approximate.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME DVD PLAYER
V10M10_IM_EN_08072006
HOME DVD PLAYER
V10M10_IM_EN_08072006
TEL: 516-626-7188
FAX: 516-626-7105
© 2006 jWIN Electronics Corp. All rights reserved. No portion of this printing material or
product enclosed herewith including design, shape and graphics, may be not reproduced or
transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any
means, electronics or mechanical, including photocopy, recording or information storage and
retrieval system. Any unauthorized distribution or reproduction of this printing material or
product, or any portion there of, will be prosecuted to the fullest possible extent of the law.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|