IMPRESSA X90/X95
Instructions for use
5/02
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 4
Fig. 8
Fig. 2
Fig. 6
Fig. 9
Fig. 3
Fig. 7
Fig. 5
Fig. 10
A
2
3
1
B
Download from Www.Somanuals.com. All Manuals Search And Download.
12
14 15
16
13
D
C
B
A
E
F
11
10
9
17
18
19
20
21
8
7
G
H
6
5
4
22
3
23
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for use
1 Drip tray / residual water container
2 Drip tray cover
3 Cover for programming keys
4 Coffee key for 2 large cups
5 Coffee key for 1 large cup
6 Coffee key for 2 small cups
7 Coffee key for 1 small cup
8 Key for special coffee
9 ON/OFF switch
10 Rinsing key
11 Display dialogue system
12 Water tank with carrying handle
13 Cover for bean container and aroma protection lid
14 Cover for pre-ground coffee filler funnel
15 Height-adjustable coffee-spout
16 Cup warming tray
17 Selector key for steam
18 Selector key for steam portion
19 Selector switch for coffee or hot water
20 Pivoting nozzle for steam
21. Profi Auto-Cappuccino/Caffè Latte
22 Height-adjustable tea-spout
23 Container for coffee grounds
Programming keys
A
B
Change filter
Back-setting of criteria / changing of memory indications
downwards
C
D
E
F
Open program
Selector switch for pre-ground coffee
Key for cleaning program
Correction of program / close
Forward-setting of criteria / changing of memory indications
upwards
G
H
Key for decalcifying program
Download from Www.Somanuals.com. All Manuals Search And Download.
13.1 Programming powder quantity...................page 13
13.2 Programming coffee temperature...............page 13
13.3 Programming water quantity.....................page 13
13.4 Programming steam portion ......................page 13
13.5 Programming tea portion ..........................page 14
13.6 Programming filter ..................................page 14
13.7 Programming water hardness ....................page 14
13.8 Programming economy mode.....................page 14
13.9 Programming timer clock .........................page 14
13.10 Programming automatic switch
on time..................................................page 15
13.11 Programming automatic switch
off time .................................................page 15
13.12 Cup counter ...........................................page 15
13.13 Programming language selection................page 15
Table of contents
1. Description ......................................................page
2. Safety instructions ............................................page
2.1 Warnings ..................................................page
2.2 Safety precautions......................................page
3. Check before use ..............................................page
3.1 Checking mains voltage...............................page
3.2 Checking fuse ............................................page
3.3 Adding coffee beans ...................................page
3.4 Adjusting grinder .......................................page
4. Preparing machine ............................................page
4.1 Fill system with water .................................page
4.2 Cup illumination ........................................page
5. Rinsing the machine ..........................................page
6. Adjusting for water hardness ..............................page
7. Use of Claris filter cartridges..............................page
7.1 Placing filter .............................................page
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
N
13.14 Program key
.....................................page 15
14. Care and maintenance .......................................page 16
14.1 Fill water ...............................................page 16
14.2 Empty grounds container..........................page 16
14.3 Empty drip tray ......................................page 16
14.4 Fill beans ...............................................page 16
14.5 Removing foreign objects .........................page 16
14.6 Clean machine ........................................page 16
14.7 Unit calcified..........................................page 17
14.8 Cleaning metal contacts ...........................page 17
14.9 General cleaning instructions.....................page 17
14.10 Regular servicing.....................................page 17
14.11 Empty system .........................................page 17
15. Cleaning ..........................................................page 17
16. Decalcifying .....................................................page 18
17. Disposal...........................................................page 19
18. Tips for a perfect coffee ....................................page 19
19. Messages.........................................................page 20
20. Problems .........................................................page 21
21. Legal information..............................................page 22
22. Technical specifications .....................................page 22
7.2 Replacing of filter ......................................page 10
8. Drawing off coffee ............................................page 10
8.1 Drawing off powder coffee...........................page 11
9. Drawing off hot water........................................page 11
10. Drawing off steam ...........................................page 11
11. Frothing up milk with the
Profi Auto-Cappuccino/Caffè Latte ......................page 11
11.1 Frothing up a portion of milk ....................page 11
11.2 Constant frothing up of milk ....................page 12
11.3 Drawing off hot milk using the
Profi Auto-Cappuccino/Caffè Latte .............page 12
11.4 Drawing off cappuccino using the
Profi Auto-Cappuccino/Caffè Latte .............page 12
11.5 Controlling the temperature using the
Profi Auto-Cappuccino/Caffè Latte .............page 12
11.6 Cleaning of the
Profi Auto-Cappuccino/Caffè Latte .............page 12
12. Switching off machine .......................................page 12
13. Programming ...................................................page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Important information for the user
2. Safety instructions
2.1 Warnings
Thank you for choosing this Jura product.
Ⅲ Children are unaware of the dangers that electrical machines re-
present. Therefore children should never be left unsupervised
around electrical machines.
Please study these instructions carefully before using your new
machine and keep them in a safe place for easy reference in the
future.
Ⅲ This machine should only be used by people who have read and
understood the operating instructions.
Should you require further information or should particular pro-
blems occur that are not dealt with in these operating instructions
in sufficient detail for you, then please ask your local dealer for
the information you require or contact Jura Elektroapparate AG
directly.
Ⅲ Never use a faulty machine or one with a damaged power cable.
Ⅲ Never immerse the machine in water.
2.2 Safety precautions
Ⅲ Never expose the machine to the effects of rain, snow or frost
and never operate it with wet hands.
Ⅲ Place your machine on a solid level surface. Never leave it on a
surface that is warm or hot (hob etc.). Choose a location that is
inaccessible for children or pets.
1. Description
This fully-automatic espresso/coffee machine impresses because of
its user-friendly operational mode and its ingenious technology. In
just one brewing-process it can prepare 1 or 2 cups of excellent,
professional-quality espresso/coffee with guaranteed froth. Been
refined and further developed by Jura, the Intelligent Pre Brew
Aroma System (I.P.B.A.S „) ensures full coffee aroma.
The Auto-Cappuccino, for example, automatically takes charge of
frothing the milk perfectly for your cappuccino. It sucks milk from
a Tetra Pak or a jug, heats and froths it up. Just choose the pro-
grammable steam quantity or the continuous steam function. Pre-
paring a cup of tea with your machine is as simple as can be as
well. The water quantity can be programmed and you can put your
teacup under the coffee-spout. Now the selected water quantity
flows into your cup through a separate spout.
E
Ⅲ Remove plug from power socket if an absence for a longer
period of time (holidays etc.) is planned.
Ⅲ Always remove plug from power socket before cleaning.
Ⅲ When removing plug from power socket, never tug on the cord
or on the machine itself.
Ⅲ Never repair or open the machine yourself. All repairs should be
performed by authorised service centres only using original Jura
spare parts and accessories.
Ⅲ The machine is connected to the mains power socket via an
electric cable. Ensure that no-one trips over this cable and pulls
down the machine. Keep children and animals at a distance to
the machine.
The machine works fully-automatically at the press of a key. A
decoded text-display shows messages and simplifies the operation
considerably. Because of the integrated rinsing, cleaning and
decalcifying programs care and maintenance is quick and easy.
Ⅲ Never put the machine or even parts of it in the dishwasher.
Ⅲ To prevent overheating place the machine in an airy place.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Ⅲ If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especially
natural stone and wooden surfaces, or take corresponding pre-
cautions.
Ⅲ You have the following possibilities:
the smaller the dots, the finer the grinding
the bigger the dots, the coarser the grinding
The grinding grade should only be adjusted while the grinder
is working.
3. Check before use
3.1 Checking mains voltage
4. Preparing machine
The machine is set for the correct voltage before leaving our
factory. Ensure that your mains voltage corresponds to the details
quoted on the rating plate attached to the bottom of the machine.
4.1 Fill system with water
Ⅲ Switch your machine on by pressing ON/OFF key
. The
machine adjusts fully-automatically to the starting position.
3.2 Checking fuse
Ⅲ
Ⅲ
PLEASE WAIT
The machine is designed for a current of 10 amps. Check that an
appropriate fuse is fitted.
FILL SYSTEM / PRESS STEAM
Ⅲ Press key
.
Ⅲ
FILL WATER
3.3 Adding coffee beans
Ⅲ Remove water tank and rinse well with clear tap-water.
Ⅲ Lift up cover of the bean container (13) and remove aroma pro-
tection lid.
Ⅲ Fill water tank and replace. Make sure that tank engages well.
Ⅲ
FILL SYSTEM / PRESS STEAM
Ⅲ Clean out any dirt or foreign object from the bean container.
Ⅲ Place a container under the pivoting nozzle (20) and press key
Ⅲ Fill the grinder container (Fig. 1) with coffee beans, replace
aroma protection lid and close the cover.
.
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
3.4 Adjusting grinder
Ⅲ Place a container under the coffee-spout (15) and press rinsing
key
You can adjust the grinder to the roast of your coffee. We recom-
mend the following:
.
Ⅲ
Ⅲ
UNIT RINSING
for a light roast Ǟ a finer adjustment
for a dark roast Ǟ a coarser adjustment
COFFEE READY
Ⅲ Open the cover of the bean container (13).
4.2 Cup illumination
Ⅲ To adjust grinding turn selector switch (Fig. 1) to the desired
position.
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
When you switch on the machine or press any key, the cup illumi-
nation is activated for 3 minutes. To switch on the cup illuminati-
on, with the machine switched off, press any key.
HARDNESS
LEVEL 3:
German water hardness 16 – 23°
French water hardness 28.64 – 41.14°
HARDNESS
LEVEL 4:
German water hardness 24 – 30°
French water hardness 42.96 – 53.7°
5. Rinsing the machine
The machine is adjusted to hardness level 3 before it leaves the
factory. You can alter this setting by following the instructions
below:
Ⅲ
RINSE UNIT
Ⅲ Place an empty cup under the coffee-spout (15).
Ⅲ Press rinsing key
.
Ⅲ Switch the machine on by pressing ON/OFF key
. The
machine adjusts fully-automatically to the starting position.
If the machine has been switched off and has already cooled
down it will be necessary to carry out this rinsing function
when the machine is switched on again.
After switching off the machine, the rinsing sets off automa-
tically.
Ⅲ
PLEASE WAIT
P
Ⅲ Open cover (3) and press key , until you hear an acoustic sig-
nal.
Ⅲ
PRESS KEY / POWDER QUANTITY
+
Ⅲ Press key
several times until the following message appears:
6. Adjusting for water hardness
Ⅲ
HARDNESS LEVEL 3
The water is heated inside the machine. With use, this leads to
calcium deposits (furring) forming on the machine. This will be
automatically indicated on the display.
For this reason, it is necessary to adjust the machine to the
hardness of your local water before you use it for the first time.
Use the enclosed test-sticks for this purpose.
P
Ⅲ By pressing key
hardness level flashes.
you can hear an acoustic signal, the set
E
+
Ⅲ You can alter the hardness level by pressing key - or . After
setting, press key
acoustic signal can be heard.
P
once again to confirm. An
N
Ⅲ Press key
to return to stand-by-status.
1° water hardness on the German scale represents 1.79° on
the French scale.
7. Use of Claris filter cartridges
The machine has got 5 hardness settings to choose from. While
adjusting, the chosen grade is shown on the display.
Under proper implementation of Claris filter cartridges,
decalcifying of the machine becomes unnecessary. For
further information, please read the brochure “Claris. Tough
to calcium deposits, gentle to your coffee machine“.
The symbols on the display mean:
HARDNESS
LEVEL—:
water hardness function is switched off
HARDNESS
LEVEL 1:
German water hardness 1 – 7°
French water hardness 1.79 – 12.53°
7.1 Placing filter
Ⅲ Pull up cartridge mounting. Pressing lightly, place the filter cart-
ridge in the water tank (Fig. 2).
HARDNESS
LEVEL 2:
German water hardness 8 – 15°
French water hardness 14.32 – 26.85°
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Ⅲ Pull down cartridge mounting, until it engages audibly.
Ⅲ Fill water tank with cold, fresh tap-water and replace it.
Ⅲ Empty water tank and pull up cartridge mounting. Pressing
lightly, place the filter cartridge in the water tank (Fig. 2).
Ⅲ Pull down cartridge mounting, until it engages audibly.
Ⅲ Fill water tank with cold, fresh tap-water and replace it.
Ⅲ Switch the machine on by pressing key
ON/OFF.
P
Ⅲ Open front cover (3) and press key
until you hear an acoustic
signal.
Ⅲ Switch the machine on by pressing key ON/OFF
.
Ⅲ
PRESS KEY / POWDER QUANTITY
Ⅲ Open front cover (3) and press key , until you hear an acoustic
signal.
+
Ⅲ Press key
several times until the following message appears:
Ⅲ
RINSE FILTER / PRESS STEAM
Ⅲ Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key
Ⅲ
FILTER NO
P
Ⅲ By pressing key
you can hear an acoustic signal.
.
Ⅲ
NO flashes
Ⅲ
Ⅲ
PLEASE WAIT / FILTER RINSING
COFFEE READY
+
Ⅲ You can alter the setting by pressing key - or
.
Ⅲ
YES flashes
The water might be slightly discoloured (this is not damag-
ing to the health).
P
Ⅲ To confirm press key
RINSE FILTER / PRESS STEAM
Ⅲ Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key
PLEASE WAIT / FILTER RINSING. The drawing
off of water will stop automatically.
FILTER YES
. An acoustic signal can be heard.
Ⅲ
8. Drawing off coffee
.
Ⅲ Switch the machine on by pressing key ON/OFF
.
Ⅲ
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
Ⅲ
Put an empty cup under the coffee-spout (15) and press rinsing
key
N
Ⅲ Press key
.
.
Ⅲ
COFFEE READY
Ⅲ
Ⅲ
UNIT RINSING
The water might be slightly discoloured (this is not damag-
ing to the health).
COFFEE READY
Ⅲ Put 1, respectively 2 cups under the coffee-spout and press the
required key. The pre-brew system (I.P.B.A.S.©) moistens the
coffee powder, briefly interrupts the flow and then starts the real
brewing process.
7.2 Replacing of filter
After drawing off 50 litres the filter loses its effect.
Ⅲ
REPLACE FILTER
You can interrupt the flow of coffee at any time by simply
pressing any of the coffee keys.
If only a little water is drawn off the filter should be changed every
2 months. However no message will appear on the display. You
will find a special turntable on the cartridge mounting to set the
replacement date.
To obtain a perfect layer of froth adjust the coffee-spout
(Fig. 3) to the size of your cups.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
8.1 Drawing off powder coffee
10. Drawing off steam
Ⅲ Open cover (3)
Steam can be used for heating liquids. Make sure that the
steam/frothing nozzle (Fig. 4) is pushed upwards when liquids are
heated. Push down the frothing aid to froth liquids.
Ⅲ Press selector key for pre-ground powder coffee
.
Ⅲ
FILL POWDER
Ⅲ Now put 1 or 2 level measuring spoons of pre-ground coffee into
the pre-ground powder funnel (14).
In the case of machine types, the steam / frothing aid is
installed as a standard (Fig. 4)
Ⅲ Put 1, respectively 2 cups under the coffee-spout (15) and press
the required key.
You can install the Profi Auto-Cappuccino/Caffè Latte. This
is included in the Welcome Pack (also refer to Chapters
11.3/11.4/11.5).
Never use soluble instant coffee or quick coffee. Only use
coffee powder from freshly ground beans or pre-ground
vacuum-packed coffee. Never fill the funnel with more
than 2 portions coffee powder at a time. The powder fun-
nel is not intended as a storage container.
11. Frothing up milk with the
Profi Auto-Cappuccino/Caffè Latte
Your machine is ready for frothing up milk as soon as both selec-
tor key warning lamps
glow, then press either steam-key
glow constantly. If the lamps do not
If selector key
is pressed by mistake this can be cor-
.
rected by pressing one of the coffee keys. The rinsing pro-
gram is then activated.
E
11.1 Frothing up a portion of milk
9. Drawing off hot water
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
Ⅲ Put a cup under the height-adjustable coffee spout (22) and turn
selector switch for hot water (19) to the symbol . The machine
will now deliver hot water.
Ⅲ Put a cup under the pivoting nozzle (20) and press key
STEAM PORTION
Ⅲ The drawing off of steam will stop automatically
COFFEE READY
.
Ⅲ
Ⅲ
TEA PORTION
Ⅲ The drawing off of hot water will stop automatically.
CLOSE TAP
Ⅲ Turn selector switch for hot water back to the symbol
Ⅲ
Ⅲ
If the Profi Auto-Cappuccino/Caffè Latte has not been used
for a longer period of time, press selector key first, until
.
the milk is taken in, then selector key
will obtain a regular steam portion.
. In this way you
To stop this process turn selector switch for hot water (19)
back to the symbol
.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
11.2 Constant frothing up of milk
11.6 Cleaning the
Profi Auto-Cappuccino/Caffè Latte
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
As soon as you have frothed enough milk, it is important to clean
the Profi Auto-Cappuccino/Caffè Latte.
Ⅲ Put a cup under the pivoting nozzle (20) and press key . Your
Fill water in a milk container and immerse the intake-tube in the
water. Now draw off steam until the water/steam mixture flowing
into your cup is completely clean. Your Profi Auto-Cappuccino/
Caffè Latte is clean again.
milk froths up.
Ⅲ
STEAM INTAKE
Ⅲ When the required amount of froth has been attained push selec-
tor key
anew.
Ⅲ
COFFEE READY
Remove Profi Auto-Cappuccino/Caffè Latte (21). If you do
not achieve optimum results, disassemble the flow controller
and the selector lever (Fig. 10). Thoroughly rinse these parts
with water.
11.3 Drawing off hot milk using the
Profi Auto-Cappuccino/Caffè Latte
The Profi Auto-Cappuccino/Caffè Latte can be used to draw off
hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to
draw off hot milk.
12. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key
water has run into the container, the machine powers down. Dis-
card the water.
. When the rinsing
Install the Profi Auto-Cappuccino/Caffè Latte. This is in-
cluded in your Welcome Pack.
11.4 Drawing off cappuccino using the
Profi Auto-Cappuccino/Caffè Latte
13. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The Profi Auto-Cappuccino/Caffè Latte can be used to draw off
capuccino. Adjust the selector lever (1) (Fig. 10) to position (2) to
draw off capuccino.
11.5 Controlling the temperature using the
Profi Auto-Cappuccino/Caffè Latte
The following settings can be programmed:
̈ Powder quantity
̈ Coffee temperature
̈ Water quantity
̈ Steam portion
̈ Tea portion
Adjust the selector lever (1) to
less hot milk/cappuccino. Individual fine adjustment is possible.
for hot milk/cappuccino or for
+
Download from Www.Somanuals.com. All Manuals Search And Download.
12
̈ Filter
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
̈ Water hardness
+
Ⅲ By pressing the
button, you can select the next phase, or
̈ Economy mode
̈ Timer clock
N
press the
button in order to leave the programming.
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
13.3 Programming water quantity
Ⅲ
WATER QUANTITY / SELECT KEY
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
13.1 Programming powder quantity
Ⅲ
The selected value is confirmed
Ⅲ Switch the machine on by pressing ON/OFF key
.
Ⅲ Now your machine prepares a coffee.
P
Ⅲ Press key
until you can hear an acoustic signal.
P
Ⅲ
Ⅲ
ENOUGH COFFEE? / PRESS KEY
Ⅲ
POWDER QUANTITY / SELECT KEY
P
+
-
OK?
·········· II ··········
Ⅲ Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
P
Ⅲ When the required water quantity is reached press key
. You
+
can call up the next setting by pressing key
.
Ⅲ There is an additional possibility to alter the water quantity
Ⅲ
POWDER
+
anew. Press key
or - for this purpose.
E
+
- ·········· II ··········
Ⅲ If you wish to draw another coffee to control the water quantity,
+
Ⅲ The powder quantity can be selected by pressing keys
briefly.
or -
P
press key again otherwise press key
quantity in memory.
briefly to store water
P
Ⅲ To store the new powder quantity in memory briefly press key
.
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
Ⅲ
POWDER QUANTITY / SELECT KEY.
+
Ⅲ By pressing the
button, you can select the next phase, or
13.4 Programming steam portion
N
press the
button in order to leave the programming.
Ⅲ
STEAM PORTION
13.2 Programming coffee temperature
P
Ⅲ Press key
.
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ
PORTION /....20 SEC.
Ⅲ Now press the key that you want to programme.
+
Ⅲ By pressing key
(drawing off time of 3 – 250 sec.)
or - you can programme time in seconds
Ⅲ Select the required temperature (high or normal) by activating
+
key
or - .
P
Ⅲ Press key
.
Ⅲ To store the new coffee temperature in memory briefly press key
Ⅲ
STEAM PORTION
P
.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
+
13.8 Programming economy mode
Ⅲ By pressing the
press the
button, you can select the next phase, or
N
button in order to leave the programming.
Ⅲ
ECONOMY MODE OFF
P
Ⅲ Press key
13.5 Programming tea portion
Ⅲ Place a cup under the height-adjustable tea-spout (22).
+
Ⅲ By briefly pressing key
or - you can programme the mode
you would like.
P
Ⅲ Press key
.
P
Ⅲ Then press key
briefly to store mode in memory
Ⅲ
Ⅲ
Ⅲ
OPEN TAP
+
Ⅲ By pressing the
button, you can select the next phase, or
ENOUGH TEA? / CLOSE TAP
TEA PORTION
N
press the
button in order to leave the programming.
You can programme your machine to “economy mode“. In the set-
ting ECONOMY MODE ON the steam heating-system is switched
off. The heating for the cup warming tray is switched off too. If
you want to draw off steam you need to press the steam key
warning lamps flash and your machine heats up.
Ⅲ The required portion of tea-water is programmed now.
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
,
13.6 Programming Filter
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
Please read chapter 7.1 “Placing filter“.
13.7 Programming water hardness
(only with setting Filter no)
ECONOMY MODE OFF means that the stand-by-status for steam
is set to 20 minutes and the heating for the cup warming tray is on.
After 10 minutes the warning lamp goes out. By pressing the steam
key anew, the machine returns to stand-by-status for drawing off
steam.
Ⅲ
HARDNESS LEVEL 3
P
Ⅲ Press key
+
Ⅲ By pressing key
or - briefly you can programme the water
briefly to store the water hardness level in
button, you can select the next phase, or
hardness level.
P
Ⅲ Then press key
13.9 Programming timer clock
memory.
+
Ⅲ By pressing the
A programming of the timer clock is necessary if an auto-
matic switch on time is required.
N
press the
button in order to leave the programming.
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness“.
Ⅲ
TIME —.—
P
Ⅲ Press key
.
+
P
Ⅲ By briefly pressing key
confirm by pressing key
or - you can set the hours and then
.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
13.12 Cup counter
+
-
.
Ⅲ By briefly pressing key
then confirm by pressing key
or
you can set the minutes and
P
Ⅲ
200 SUPPLIED (TOTAL SUPPLIED)
+
Ⅲ By pressing the
press the
button, you can select the next phase, or
button in order to leave the programming.
Ⅲ To obtain the information press the required key. The display
will show you the number of times the function has been chosen.
N
+
Ⅲ By pressing the
button, you can select the next phase, or
13.10 Programming automatic switch on time
N
press the
button in order to leave the programming.
A programming of the timer clock is necessary if an automatic
switch on is needed.
It is not possible to call up hot water and steam supplies.
Ⅲ
UNIT ON —.—
P
Ⅲ Press key
.
13.13 Programming language selection
+
P
Ⅲ By briefly pressing key
confirm by pressing key
or - you can set the hours and then
.
P
Ⅲ Press key
+
-
Ⅲ By briefly pressing key
and then confirm by pressing key
or
call up the language desired
+
-
.
Ⅲ By briefly pressing key
then confirm by pressing key
or
you can set the minutes and
P
.
P
+
Ⅲ By pressing the
button, you can select the next phase, or
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
N
press the
button in order to leave the programming.
E
To switch off the automatic timer proceed as follows:
N
13.14 Program key
P
Press key
N
N
By using key
you can set back the following settings (powder
Press key
quantity, coffee temperature, water quantity, steam portion, tea
portion) to their original standard settings.
UNIT ON —:—
Ⅲ
COFFEE READY
13.11 Programming automatic switch off time
N
Ⅲ Press key
until you can hear an acoustic signal.
Ⅲ
OFF AFTER 5.0 HOURS
P
Ⅲ Press key
If a mistake occurs while programming one of the above
N
+
P
settings, just press key
and the chosen setting moves back
Ⅲ By briefly pressing key
confirm by pressing key
or - you can set the hours and then
(0.5 to 9.0 hours).
to its original standard setting.
+
Ⅲ By pressing the
press the
button, you can select the next phase, or
N
button in order to leave the programming.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
14. Care and maintenance
14.1 Fill water
14.4 Fill beans
Ⅲ
FILL BEANS
Ⅲ Fill beans as described in chapter 3.3.
Ⅲ
FILL WATER
Ⅲ If this message shows on the display no more coffee can be
drawn off. Top up water.
The message FILL BEANS will only disappear after drawing
off a coffee. We recommend cleaning the bean container
from time to time with a dry cloth before you refill beans.
Switch off the machine for this purpose.
The water tank should be rinsed and filled with fresh water
daily. Only use fresh, cold water. Never top up with milk,
mineral water or any other liquids. You can top up water
without removing tank.
14.5 Removing foreign objects
Ⅲ Switch off your machine by pressing ON/OFF key
Ⅲ Remove plug from power socket.
.
14.2 Empty grounds container
Ⅲ Open bean container (13) and remove the beans. The remaining
beans can be removed with a vacuum cleaner.
Coffee grounds are collected in the grounds container (23).
Ⅲ
EMPTY GROUNDS
Ⅲ Loosen both screws in the bean container and then remove
container (Fig.5 + 6)
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the grounds container.
Ⅲ Remove any remaining beans with a vacuum cleaner.
Ⅲ Put the spanner on (Fig.7).
Ⅲ Remove drip tray carefully as there is water in it.
Do not disconnect the machine from power socket while
you empty grounds.
Ⅲ Now turn spanner anticlockwise until the foreign object loosens.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Replace bean container and fasten screws.
14.3 Empty drip tray
Ⅲ
EMPTY TRAY
14.6 Clean machine
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the drip tray.
Ⅲ
CLEAN UNIT
After coffee, etc., has been drawn off 220 times or after 180 rinsing
programs have been run, the machine must be cleaned. You can
continue to draw off coffee and hot water / steam. However we
recommend that you clean the machine (as described in chapter 15)
within the next few days.
Ⅲ Remove drip tray carefully as there is water in it.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
If you notice any furring in the water tank, this can be de-
calcified separately with a customary decalcifying agent.
Remove the tank from the machine for this purpose.
Ⅲ
CLEAN NOW
An acoustic signal indicates the need of an immediate cleaning.
If a Claris filter cartridge is used, remove it beforehand.
14.7 Unit calcified
Ⅲ
UNIT CALCED
The machine signals when decalcifying becomes necessary.
14.10 Regular servicing
Regular Jura services ensure your machine‘s reliability and longer
life. Keep the original packaging to protect the machine while
being transported.
Under the correct implementation of Claris filter cartridges,
decalcifying of the machine becomes unnecessary. For
further indications read Chapter 7 “Use of Claris filter cart-
ridges“.
14.11 Empty system
14.8 Cleaning metal contacts
This procedure is necessary to prevent your machine from
frost damage while being transported.
Ⅲ
EMPTY TRAY / CLEAN CONTACTS
Ⅲ The remnants of the calcified deposits in the area of the metal
contacts must be removed. Proceed as follows:
Ⅲ Put a container under the pivoting nozzle (20).
Ⅲ Press selector key
and remove water tank
Ⅲ Rinse fastenings in groove (B) as well as the metal contacts (A)
with hot water and some washing-up liquid. Then clean the
fastenings in groove (B) as well with a brush (Fig. 8).
E
Ⅲ
Ⅲ
STEAM INTAKE
PRESS STEAM / FILL SYSTEM
Ⅲ Switch off machine by pressing ON/OFF key
.
14.9 General cleaning instructions
15. Cleaning
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
The machine has an integrated cleaning program. The procedure
lasts about 15 minutes.
Please use Jura cleaning tablets only. These are available from your
Jura dealer.
Ⅲ Wipe down the casing inside and out using a soft, damp cloth.
Ⅲ Clean the pivoting nozzle after every use.
Ⅲ After warming milk, draw off some hot water to clean the
pivoting nozzle inside.
It is essential not to interrupt the process once it has been
started.
Ⅲ You can take off the Profi Auto-Cappuccino/Caffè Latte for a
thorough cleaning.
Ⅲ Switch on your machine by pressing ON/OFF
key
until you can hear an acoustic signal.
EMPTY TRAY (FILL WATER might show as well)
Ⅲ The water tank should be rinsed and filled with clean water
daily.
Ⅲ Press key
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Put a sufficiently large container under the coffee-spout (15)
in order to prevent cleaning liquid from running into the drip
tray.
Ⅲ Remove and empty water tank.
Ⅲ Replace empty water tank.
Ⅲ Switch off your machine by pressing ON/OFF
key and let it
cool down for approx. 5 hours.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
ADD TABLET (Fig. 9) / PRESS CLEANING
UNIT CLEANING / PLEASE WAIT
EMPTY TRAY
Ⅲ Open cover (3).
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ
Ⅲ
EMPTY TRAY
PLEASE WAIT
AGENT IN TANK
RINSE UNIT
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
COFFEE READY
The powder funnel for pre-ground coffee should be cleaned
after each cleaning process. Remove it from the machine,
rinse it with hot tap water and replace it after drying.
Ⅲ
AGENT IN TANK / OPEN TAP / PRESS CALC
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Profi Auto-Cappuccino/Caffè Latte.
16. Decalcifying
Ⅲ Turn selector switch for coffee (19) to the symbol
key
and press
.
Your machine has an integrated decalcifying program. It lasts
approx. 50 minutes.
Ⅲ
UNIT DECALCIFYING / PLEASE WAIT
Please use Jura decalcifying tablets only. These are available from
your Jura dealer.
Ⅲ When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PRESS CALC
Run the decalcifying program only after the machine has
been switched off for at least 5 hours and has cooled down
completely. The running decalcifying program must not be
interrupted.
UNIT DECALCIFYING / PLEASE WAIT
CLOSE TAP
UNIT DECALCIFYING / PLEASE WAIT
If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.
Ⅲ Inside the machine the decalcifying agent is conducted to the
drip tray.
Ⅲ
Ⅲ
EMPTY TRAY
FILL WATER
In any case please wait until the filled decalcifying agent is
used up and the tank is empty. Never top up the decalcifying
agent.
Ⅲ Place a container under the pivoting nozzle (20).
Ⅲ
Ⅲ
OPEN TAP
PRESS CALC
Download from Www.Somanuals.com. All Manuals Search And Download.
18
17. Disposal
Ⅲ
UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Place a container under the height-adjustable tea-spout (22).
For correct disposal, you should return your coffee machine to your
dealer, Jura service centre or Jura Elektroapparate AG.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PRESS CALC
UNIT DECALCIFIYING / PLEASE WAIT
CLOSE TAP
18. Tips for a perfect coffee
Height adjustable coffee-spout
You can adjust the height of the coffee-spout to the size of your
cups.
UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Inside the machine the water is conducted to the drip tray.
Ⅲ
CLEAN CONTACTS / EMPTY TRAY
(please refer to chapter 14.8)
Grinding
Please refer to chapter 3.4 “Adjusting grinder“.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
Pre-warm cups
You should warm cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important warming the
cups is.
UNIT RINSING
COFFEE READY
Sugar and cream
Warmth is lost by stirring the contents of the cup. Adding milk or
cream from the refrigerator considerably lowers the temperature of
the coffee.
E
Download from Www.Somanuals.com. All Manuals Search And Download.
19
19. Messages
Cause
Action
FILL WATER
Water tank is empty
Top up with water
Water level indicator in tank is jammed
Tank is calcified, water level indicator is stuck
Empty tank, rinse out, fill up and replace
Remove tank, decalcify, rinse well, fill up with water
and replace
FILL BEANS
Bean container is empty
Top up with beans
Message still displayed, although beans filled
Draw off cup of coffee. FILL BEANS message only
disappears after coffee is drawn off
A foreign object is stuck in the grinder
Coffee grounds container is full
Remove foreign object as described in chapter 14.5
“Removing foreign objects“
EMPTY GROUNDS
Remove drip tray, empty grounds container, replace
tray
Message still displayed although grounds
container emptied.
The tray was out of the machine for less than 8 sec
for emptying. Take tray out again for approx. 10 sec
and replace
The message appears after only a few cups have
been drawn off
Leave the machine switched on while the grounds
container is being emptied. The counter is only reset
to zero if the machine is left switched on
TRAY MISSING
EMPTY TRAY
Tray has not been replaced correctly
Insert tray correctly
Grounds have fallen under tray and are preventing Remove tray, clean inside of machine, replace tray
it from being correctly inserted
The residual water container is full
Remove container carefully, empty, rinse out and
replace
Message still displayed, although container
emptied
Remove container, clean metal contacts
(please refer to chapter 14.8)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Cause
Action
CLEAN UNIT
You have drawn off coffee 220 times or run
the rinsing program 180 times
Clean as described in chapter 14.6
Message still displayed, although machine
cleaned
Run cleaning program again; this time do not
add cleaning tablet
UNIT CALCED
The espresso/coffee machine sector needs
decalcifying
Run decalcifying program as described in
chapter 16
Message still displayed, although machine
decalcified
Run cleaning program again; this time using water
only and without decalcifying agent
FAULT 2
FAULT 8
Temperature too low
Initialisation problem
– Switch device off
– Leave device for approx. 2 hours at room
temperature
– Switch device on
Switch device off, disconnect from mains,
switch on
E
20. Problems
Problem
Cause
Action
Coffee only flows in dribs
and drabs while drawing off
– Powder too fine
– Adjust grinder to a coarser grinding
– Run the rinsing programme once or twice.
– If the problem persists, run cleaning programme
Coffee flow is stopped
after pre-brewing
– Not enough coffee powder in the system
– Foreign element in grinder
– Draw off one cup of coffee
Grinder is extremely noisy
– Proceed as described in chapter 14.5
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Problem
Cause
Action
Not enough froth while
frothing up milk
– Unsuitable milk-type
– Frothing nozzle blocked
– Clean Auto-Cappuccino
– Use full cream milk
– Clean frothing nozzle
– Clean Profi Auto-Cappuccino/Caffè Latte
– as described in chapter 11.6
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate
AG.
21. Legal information
22. Technical specifications
These operating instructions contain all the information necessary
for the correct use, operation and maintenance of your espresso/
coffee machine.
Understanding and complying with the directions contained in
these operating instructions are essential to ensure that the machine
is utilised without risk and to ensure safety during operation and
maintenance.
Impressa X90/X95
Voltage:
Output:
Fuse:
230 V AC
1350 W
10 A
Safety check:
Energy consumption standby:
Energy consumption ready to
make coffee:
approx. 4,4 Wh
These operating instructions cannot cover all the possible ways in
which this machine may be used.
approx. 31 Wh, Economy Mode on
approx. 41 Wh, Economy Mode off
max. 15 bar
280 gr.
approx. 1,1 m
5,7 litres
max. 40 port.
15 kg
41 x 47 x 39 cm
We would like to further point out that the contents of these operat-
ing instructions in no way constitute a part of, or alter, any pre-
vious or existing contract, agreement or legal relationship. All ob-
ligations on the part of Jura Elektroapparate AG result solely from
the relevant sales agreement which also contains full details of
the only warranty terms valid in respect of this machine. The con-
tractual terms of this warranty are neither extended nor limited in
any form by the information in these operating instructions.
These operating instructions contain information that is protected
by copyright. The photocopying or translation into any other
language of these instructions without prior written authorisation
from Jura Elektroapparate AG is strictly prohibited.
Pump pressure:
Capacity, bean container:
Cable length:
Water tank:
Capacity, grounds container:
Weight:
Dimensions (B x H x D):
Download from Www.Somanuals.com. All Manuals Search And Download.
22
|