IMPRESSA F70/F707
Instructions for use
9/06
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 9
Fig. 14
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 19
Fig. 20
Temp. max.
Fig. 21
Temp. min.
Download from Www.Somanuals.com. All Manuals Search And Download.
Control elements
9
8
3
7
1. Rotary Switch
2. Illuminated ring
3. ON / OFF symbol
4. 1 LARGE CUP symbol
5. 1 COFFEE symbol
4
21 22 23
5
6
6. 1 ESPRESSO symbol
7. MAINTENANCE symbol
8. START symbol
11
12
13
9. Display dialog system
10. Water tank with handle
11. Filler funnel for pre-ground coffee
12. Bean tank cover
10
9
14
2
13. Aroma preservation cover
14. Steam / hot water draw-off tap
15. Profi-Auto-Cappuccino Frother with milk pipe
16. Interchangeable hot water nozzle (see Fig. 5)
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Drip grate
1
15/16
17
18
20. Drip tray
24
21. MILD symbol
22. NORMAL symbol
19
23. STRONG symbol
24. Power switch
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Safety information..........................................page
7
7
7
7
7
7
7
8
8
8
8
9
15. Programming ................................................page 17
15.1 Programming the filter ...........................page 17
15.2 Programming the water hardness ..............page 17
15.3 Maintenance menu.................................page 17
15.4 Programming the aroma INTENSIVE
1.1
1.2
Warning..............................................page
Precautions..........................................page
2. Preparing the IMPRESSA................................page
2.1
2.2
2.3
2.4
2.5
2.6
Check supply voltage..............................page
Check electrical fuse ..............................page
Fill water tank......................................page
Fill coffee beans....................................page
Adjusting the grinding gear .....................page
Power switch........................................page
or STANDARD .....................................page 17
15.5 Programming the temperature..................page 18
15.6 Programming the time............................page 18
15.7 Programming the automatic
switch-on time ......................................page 19
3. First use.......................................................page
4. Adjusting the water hardness ............................page
15.8 Programming the automatic
switch-off time......................................page 19
5. Installation of CLARIS plus filter cartridges ........page 10
15.9 Cup counter .........................................page 19
15.10 Programming the language......................page 19
15.11 Programming Display 24H/AM/PM ...........page 20
15.12 Programming the display for ML/OZ..........page 21
15.13 Exit programming mode .........................page 21
16. Maintenance .................................................page 21
16.1 Filling in water.....................................page 21
16.2 Emptying the coffee grounds container .......page 21
16.3 Drip tray missing...................................page 22
16.4 Fill coffee beans....................................page 22
16.5 Replacing the filter................................page 22
16.6 Cleaning the IMPRESSA ........................page 22
16.7 IMPRESSA calcified .............................page 22
16.8 General cleaning instructions ...................page 22
16.9 Emptying the system ..............................page 23
17. Cleaning.......................................................page 23
17.1 Cleaning without display request ...............page 24
18. De-scaling.....................................................page 24
18.1 Decalcifying without display request ..........page 25
19. Disposal .......................................................page 25
20. Tips for perfect coffee .....................................page 26
21. Messages......................................................page 27
22. Problems......................................................page 28
23. Legal information...........................................page 29
24. Technical data ...............................................page 29
5.1
5.2
5.3
Installing the filter ................................page 10
Replacing the filter................................page 10
Changing the filter without display request..page 11
6. Rinsing the IMPRESSA...................................page 11
6.1
Rinsing the IMPRESSA
without display request ...........................page 11
7. Adjusting the water quantity for coffee................page 11
8. Making 1 cup of coffee....................................page 12
9. Making 2 cups of coffee...................................page 12
10. Drawing off pre-ground coffee ...........................page 13
11. Drawing off hot water .....................................page 13
12. Dispensing steam............................................page 14
13. Dispensing Cappuccino with the Professional
Cappuccino Frother.........................................page 14
13.1 Dispensing Hot Milk with the
Professional Cappuccino Frother...............page 15
13.2 Cleaning of the Professional Cappuccino
Frother ..............................................page 15
13.3 Rinsing the Professional Cappuccino
Frother ..............................................page 16
13.4 Cleaning the Professional Cappuccino
Frother ..............................................page 16
14. Switching off the IMPRESSA ...........................page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Introduction
Thank you for purchasing the IMPRESSA. To ensure perfect func-
tioning of your IMPRESSA, carefully read this operating manual
and keep it for future reference.
Should you need more information or if you encounter particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
Ⅲ Always disconnect mains cable before cleaning the machine.
Ⅲ When disconnecting the mains cable never pull on the mains
cable or the machine itself.
E
Ⅲ The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
Ⅲ Never put the coffee machine or individual parts of it into a
dishwasher.
You will also find useful tips on operation and maintenance
Ⅲ Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
1. Safety information
1.1 Warning
2. Preparing the IMPRESSA
2.1 Check supply voltage
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
The IMPRESSA is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
IMPRESSA.
Ⅲ The coffee machine may only be used by instructed persons.
Ⅲ Never use a defective coffee machine or a machine with a
defective mains cable.
2.2 Check electrical fuse
Ⅲ Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
The IMPRESSA is designed for an electric current of 10 amperes.
Check if the electrical fuse has sufficient capacity.
Ⅲ Never immerse the coffee machine in water.
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
1.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Ⅲ Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Ⅲ Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
2.6 Power switch
Actuate the power switch (24) on your IMPRESSA before
using the machine for the first time.
2.4 Fill coffee beans
We recommend that you switch off your IMPRESSA with
the power switch (24) if you intend not to use the machine
for longer periods of time (e.g.during holidays).
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
3. First use
Ⅲ Fill coffee beans in the bean tank (12).
Ⅲ Switch on the IMPRESSA using the power switch (24).
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Ⅲ
Your IMPRESSA is in standby mode.
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
Ⅲ Touch the
(3) symbol
Ⅲ
SPRACHE
DEUTSCH
2.5 Adjusting the grinding gear
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the rotary switch (1) until the required language is dis-
played (Fig. 17).
You can adjust the grinding gear to the roast of your coffee. We
recommend
Ⅲ For example
LANGUAGE
ENGLISH
a fine grinding degree Ǟ for bright roasts (the smaller the dots,
the finer the grinding)
a coarse degree
Ǟ
for dark roasts (the larger the dots, the
coarser the grinding)
Ⅲ Confirm your selection by pressing the rotary switch (1) (Fig. 17).
Ⅲ
FILL
WATER
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Fill the water tank (10) with fresh water.
OPEN TAP
Ⅲ
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(15) (Fig. 10).
Ⅲ To adjust the grinding degree, turn the rotary switch (Fig. 2) to
the required position.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ
FILLING
SYSTEM
Download from Www.Somanuals.com. All Manuals Search And Download.
8
The displayed information means the following:
LEVEL –– Water hardness function switched off
Ⅲ
CLOSE TAP
Ⅲ Close the steam / hot water draw-off tap (14).
LEVEL 1 German water hardness degree 1 to 7°
French Water hardness degree 1.79 – 12.53°
Ⅲ
Ⅲ
Ⅲ
FILLING SYSTEM
HEATING
LEVEL 2 German water hardness degree 8 to 15°
French Water hardness degree 14.32 – 26.85°
PRESS
MAINT.
E
LEVEL 3 German water hardness degree 16 to 23°
French Water hardness degree 28.64 – 41.14°
Ⅲ Touch the symbol
(7).
Ⅲ Machine carries out a rinsing operation.
LEVEL 4 German water hardness degree 24 to 30°
French Water hardness degree 42.96 – 53.7°
Ⅲ
Ⅲ
RINSING
READY
When the IMPRESSA leaves the factory it is adjusted to LEVEL
3. You can adjust another hardness. To do this, proceed as follows:
If BEANS FILL is displayed, press the coffee draw-off key
again. Machine not filled with coffee beans yet.
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears To get an excellent crema, adjust the coffee spout (17) to the
size of your cup (Fig. 3).
Ⅲ
FILTER –
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
4. Adjusting the water hardness
Water is heated in the IMPRESSA. As a result, calcification
occurs during normal use and is indicated automatically.
Before using the IMPRESSA for the first time the hardness
of the water used must be adjusted. Use the supplied test
sticks for this.
Ⅲ
HARDNESS
Ⅲ Now press the Rotary Switch (1) to start the programming.
LEVEL 3
Ⅲ Turn the Rotary Switch (1) until the required level is displayed.
Ⅲ For example, LEVEL 4
Ⅲ Press the Rotary Switch (1) to confirm the required level.
HARDNESS
Ⅲ
1° German hardness is equivalent to 1.79° French hardness.
Ⅲ
If the filter is activated, the program step Water Hardness no
longer appears.
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
The IMPRESSA has 5 hardness degrees which can be used
and are displayed while you are adjusting the water hardness.
Ⅲ
READY
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Ⅲ If not installed already, insert the CLARIS plus filter.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig.12).
5. Installation of CLARIS plus filter cartridges
If the CLARIS plus filter cartridge is installed properly,
de-scaling of the coffee machine is no longer required. For
more information on the CLARIS plus filter cartridge refer
to brochure «CLARIS plus. Hard on limescale. Gentle on
your coffee machine.»
Ⅲ
RINSING
FILTER
Ⅲ
CLOSE TAP
Ⅲ Close the steam/hot water draw-off tap (14), now the IM-
PRESSA will heat up to coffee temperature.
5.1 Installing the filter
Ⅲ
Ⅲ
HEATING UP
READY
Draw off 1/2 litre of water to rinse filter completely. In order
to ensure perfect operation, close tap (14) only after the dis-
play says
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
CLOSE TAP
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
water tank, applying a gentle pressure (Fig. 1).
5.2 Replacing the filter
Draw off 1/2 litre of water to rinse filter completely. In order
to ensure perfect operation, close tap (14) only after the dis-
play says
Ⅲ Fold down the cartridge holder again until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and install it again.
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears CLOSE TAP
After drawing off approx. 50 litres, the filter cartridge will be
used up. A message requesting you to replace the filter will
appear on the display. The scale on the cartridge holder in
the water tank will tell you how much longer you can use the
CLARIS plus filters.
Ⅲ
FILTER –
Ⅲ Press the Rotary Switch (1) to start the programming.
NO –
Ⅲ
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ
CHANGE FILTER / MACHINE READY
symbol (7).
Ⅲ
YES
ߛ Ⅲ Touch the
Ⅲ Press the Rotary Switch (1) to activate the filter cartridge.
Ⅲ
REPLACE
OPEN TAP
Ⅲ
INSERT
OPEN TAP
Ⅲ Remove the water tank from the machine and empty it.
Ⅲ Put a sufficiently large container (at least 0.5 litre) under the Pro-
fessional Cappuccino Frother (15) (Fig. 10).
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
water tank, applying a gentle pressure (Fig. 1).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the steam position (Fig. 20).
Ⅲ Fold down the cartridge holder again until it engages audibly.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it.
Ⅲ Touch the
symbol (3).
Ⅲ Place a sufficiently large receptacle (at least 1/2 litre) under the
Professional Cappuccino Frother (15) (Fig. 10).
Ⅲ
Ⅲ
HEATING UP
PRESS
MAINT.
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the steam position (Fig. 20).
Ⅲ Touch the
symbol (7).
RINSING
READY
E
Ⅲ Open the tap for dispensing steam/hot water (14) (Fig. 12).
Ⅲ
Ⅲ
Ⅲ
RINSING
FILTER
Ⅲ
CLOSE TAP
6.1 Rinsing the IMPRESSA without display request
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears. Ⅲ
Ⅲ
HEATING UP
READY
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
5.3 Changing the filter without display request
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ Press the Rotary Switch (1) until
FILTER
ߛ appears. Ⅲ
RINSE
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
Ⅲ
RINSING
READY
Ⅲ
YES
ߛ Ⅲ Press the Rotary Switch (1) again to confirm.
INSERT/OPEN TAP
Ⅲ The program “Change filter” is now active. Now proceed as
Ⅲ
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may
deviate from the actual value
described in Chapter 5.2 from
TAP onwards.
REPLACE/OPEN
You can change/stop the water quantity during the draw-off
operation, too. Turn the rotary switch (1) until the required
ML value is displayed.
6. Rinsing the IMPRESSA
When the IMPRESSA is switched off and has cooled down,
a rinsing operation is started when the machine is switched
on again. When the machine is switched off, a rinsing
operation is started automatically.
You can adjust the water quantity in steps of 5 ML using the
Rotary Switch (1).
Ⅲ
READY
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Ⅲ Turn the Rotary Switch (1) until the required water quantity is
displayed.
Ⅲ
Ⅲ
e.g. 120 ML
COFFEE
Ⅲ For example,
120 ML
Ⅲ Your coffee is being prepared.
READY
Ⅲ
8. Making 1 cup of coffee
You can choose from 3 different coffee strengths. Touch one
9. Making 2 cups of coffee
of the symbols
coffee. MILD
/
/
to select the strength of your
You cannot choose the strength of the coffee when making
2 cups. The machine automatically makes 2 mild cups of
coffee.
NORMAL STRONG.
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
Touch the
maturely.
(8) symbol to stop drawing off coffee pre-
Touch the
maturely.
(8) symbol to stop drawing off coffee pre-
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
Press the Rotary Switch (1) briefly to check how much
coffee water you used last.
Press the Rotary Switch (1) briefly to check how much
coffee water you used last.
Ⅲ
READY
Ⅲ Place a cup under the height-adjustable coffee spout (17).
Ⅲ
READY
Ⅲ Touch the
(5).
Ⅲ Place two cups under the height-adjustable coffee spout (17).
Ⅲ Touch the coffee draw-off symbol of your choice twice
Ⅲ
COFFEE symbol
Ⅲ Select an aroma by touching one of the symbols
Ⅲ
Ⅲ
2 COFFEE
Ⅲ E.g.
(STRONG aroma)
STRONG
120 ML (water quantity last adjusted).
Ⅲ
Ⅲ The illuminated ring (2) is active.
Ⅲ Touch the
(8) symbol
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee
Ⅲ
160 ML (water quantity last adjusted).
water appears on the display (9).
Ⅲ The illuminated ring (2) is active.
Ⅲ
Ⅲ
e.g. 210 ML
2 COFFEE
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee
water appears on the display (9).
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Ⅲ Your coffee is being prepared.
READY
Ⅲ Turn the Rotary Switch (1) again to select the water quantity
individually:
Ⅲ
Ⅲ For Example:
COFFEE
Ⅲ Your product is being prepared.
READY
210 ML
Ⅲ
10. Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
E
Ⅲ
11. Drawing off hot water
The amount of hot water you used last is saved by the
IMPRESSA until the next time you make coffee.
Install the hot water nozzle (see Fig. 5) to obtain perfect
water flow. Do not replace the replaceable hot water nozzle
(16) directly after drawing off water, because the nozzle is
hot after the draw-off operation.
If you have filled in too little powder, the message NOT
ENOUGH POWDER will be displayed. The IMPRESSA
stops the operation and returns to "ready for draw off" mode.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
At the start of the water draw-off operation there can be
splashing Avoid direct contact with the skin!
Ⅲ
READY
Ⅲ
READY
Ⅲ Put 1 or 2 cups under the adjustable coffee spout (17).
Ⅲ Place a cup under the replaceable hot water nozzle (16).
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ The illuminated ring (2) is active.
Ⅲ Open the cover of the filler funnel for pre-ground coffee (11).
Ⅲ
FILL
POWDER
Ⅲ
STEAM
(8) symbol
140 ML
Ⅲ Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler
funnel for pre-ground coffee (11) (Fig. 15) and close the cover.
Ⅲ Touch the
Ⅲ
SELECT
KEY
Ⅲ For example,
WATER
Ⅲ
Ⅲ Press the required draw-off key.
Ⅲ Adjust the required water quantity by turning the rotary switch
Ⅲ Touch the
(8) symbol
(1).
Ⅲ
120 ML (water quantity last adjusted)
Ⅲ For example,
WATER
200 ML
Ⅲ The illuminated ring (2) is active.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Ⅲ If the required water quantity is reached, the following message
Ⅲ You can adjust the steam draw-off time individually by turning
is displayed:
the rotary switch (1) until the required SEC are displayed.
Ⅲ
CLOSE TAP
Ⅲ For example,
35 SEC
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ If you do not change the steam draw-off time settings using the
rotary switch (1), the machine will use the settings last adjusted.
Ⅲ
READY
Ⅲ During the steam draw-off operation, the message STEAM is
displayed.
Before CLOSE TAP water may still escape the system.
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed.
12. Dispensing steam
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ
READY
The steam function is used for the preparation of milk foam
and hot milk, as well as for the Professional Cappuccino
Frother (15) cleaning programme.
At any time, you can abort steam dispensing early, by clos-
ing the tap for dispensing steam/hot water (14).
With the optionally available 2-stage frothing nozzle, liquids
can be heated and frothed using the steam function.
Before CLOSE TAP, steam may still escape the system.
Make sure that the nozzle is correctly fitted when drawing
steam. If the nozzle becomes blocked with particles of milk
residue or is incorrectly assembled, a danger can arise during
use whereby the nozzle may jump off.
13. Dispensing Cappuccino with the
Professional Cappuccino Frother
Cappuccino comprises one third each of Espresso, hot milk
and milk foam. You produce the milk portion with the Pro-
fessional Cappuccino Frother (15).
When steam is drawn, a vacuum is produced which, with the
aid of the Professional Cappuccino Frother (15), draws in the
milk and produces milk foam.
Due to the system design, some water will escape at first
when steam is drawn. However, this will not affect the result
in any way.
When drawing steam, spluttering can occur at the start. The
nozzle becomes hot in use. Avoid any direct skin contact.
To ensure perfect function, the Professional Cappuccino
Frother (15) must be cleaned regularly.
Ⅲ
READY
Ⅲ To draw off steam, open the steam/hot water draw-off tap (14)
(Fig. 12).
Make sure that the nozzle is correctly fitted. If the nozzle be-
comes blocked with particles of milk residue or is incorrectly
assembled, a danger can arise during use whereby the nozzle
may jump off.
Ⅲ The illuminated ring (2) is active.
Ⅲ
STEAM
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Ⅲ When using for the first time, remove the protective cover from
the Professional Cappuccino Frother (15) (Fig. 6). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
Ⅲ During the steam draw-off operation, the message STEAM is
displayed.
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed.
Ⅲ Remove the milk pipe from the Welcome Pack and connect it to
the Professional Cappuccino Frother (15).
Ⅲ Close the steam / hot water draw-off tap (14).
E
Ⅲ
READY
Ⅲ Insert the other end of the milk pipe into a Tetra Pak of milk or
connect it to a milk container (Fig. 7).
Due to the system design, steam can still escape and some
milk may continue to drip before the TAP is closed.
Ⅲ Place a cup under the Professional Cappuccino Frother (15)
(Fig. 7).
At any time, you can abort steam dispensing early, by clos-
ing the tap for dispensing steam/hot water (14).
A useful addition is available for all lovers of milk speciali-
ties in the form of high-quality vacuum milk containers.
They keep the milk cool the whole day long and are opti-
mally suited to the design of your IMPRESSA.
All original JURA accessories can be obtained from the
specialist shop.
Ⅲ Now, move your cup with the milk foam and place it under the
coffee spout and dispense the required coffee product. (Fig. 8).
Your Cappuccino is ready.
13.1 Dispensing Hot Milk with the
Professional Cappuccino Frother
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the milk foam position (Fig. 19).
Turn the selector switch of the Professional Cappuccino
Frother (15) to the milk range (Fig. 21).
The procedure for dispensing hot milk is the same as the
procedure for dispensing milk foam for Cappuccino (Chapter
13).
Ⅲ
READY
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12). The milk
foam is prepared.
Ⅲ The illuminated ring (2) is active.
Ⅲ
STEAM
Ⅲ You can adjust the steam draw-off time individually by turning
the rotary switch (1) until the required SEC are displayed.
13.2 Cleaning of the
Professional Cappuccino Frother
Ⅲ For example,
35 SEC
To ensure that the Professional Cappuccino Frother functions
perfectly, you should rinse it with water each time after
preparing milk.
Ⅲ If you do not change the steam draw-off time settings using the
rotary switch (1), the machine will use the settings last adjusted.
Adjust the steam dispensing time to suit the size of your cup.
You will not be prompted by your IMPRESSA to rinse the
Professional Cappuccino Frother.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Ⅲ Draw steam until the receptacle with the Auto-Cappuccino
Cleaner is empty.
This procedure cleans the Professional Cappuccino Frother and
the milk pipe.
13.3 Rinsing the Professional Cappuccino Frother
Ⅲ Carefully pull off the Professional Cappuccino Frother from your
IMPRESSA.
Ⅲ Dismantle the Professional Cappuccino Frother (15) into its indi-
vidual parts (Fig. 16).
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ
READY
Ⅲ Thoroughly rinse all parts of the nozzle under running water.
Ⅲ Reassemble the Professional Cappuccino Frother (15) and refit it
Before CLOSE TAP water may still escape the system.
on to your IMPRESSA.
Ⅲ Fill the receptacle with 2.5 dl of fresh water.
Dip the milk pipe into the receptacle with the fresh water.
13.4 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15)
functions perfectly, you should clean it daily if you have pre-
pared milk foam or hot milk.
Ⅲ Open the tap for dispensing steam/hot water (14) (Fig. 12) in or-
der to draw steam.
Ⅲ Draw steam until the receptacle with the fresh water is empty.
This procedure rinses the Professional Cappuccino Frother (15)
and the milk pipe with fresh water.
You will not be prompted by your IMPRESSA to clean the
Professional Cappuccino Frother (15).
Ⅲ Cleaning of the Professional Cappuccino Frother (15) is now
complete, your IMPRESSA is ready for use.
You can obtain the JURA Auto-Cappuccino Cleaner from
the specialist shop.
14. Switching off the IMPRESSA
Ⅲ Place a receptacle under the Professional Cappuccino Frother
In order to ensure perfect operation, please don’t switch off
your IMPRESSA at the power switch (24) before all the
(15) (Fig. 9).
Ⅲ Fill a second receptacle with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
symbols on the display (9) have gone off except for
(3).
Ⅲ Dip the milk pipe into the second receptacle with the Auto-Cap-
puccino Cleaner (Fig. 9).
Ⅲ
READY
Ⅲ Switch off the IMPRESSA using the ON/OFF key
RINSING
(3).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the milk position (Fig. 21) or to the milk foam position
(Fig. 19).
Ⅲ
Ⅲ An automatic rinsing operation is started.
Ⅲ
Ⅲ
READY
Your IMPRESSA is in standby mode.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
15. Programming
15.3 Maintenance menu
When your IMPRESSA leaves the factory it is adjusted such
Ⅲ
READY
that you can draw off coffee without having to change any
settings. However, you can programme various parameters
individually.
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
E
Ⅲ Turn the Rotary Switch (1) until
You can programme the following stages:
MAINTENANCE appears
¼ Filter
Ⅲ Press the Rotary Switch (1)
¼ Water hardness
¼ Maintenance
¼ Aroma
Ⅲ
RINSE
Ⅲ Turn the Rotary Switch (1) until the required program item ap-
pears on the display (9).
¼ Temperature
¼ Time
Ⅲ
Ⅲ
e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT
e.g. CLEAN
¼ Automatic switch-on time
¼ Automatic switch-off time
¼ Draw-offs
Ⅲ Press the Rotary Switch (1)
Ⅲ The cleaning program starts.
¼ Language
¼ Display
Ⅲ
EMPTY TRAY
¼ Exit
Ⅲ Continue with Chapter 17 Cleaning, from point 3
To start programming, press the Rotary Switch (1) until
EMPTY TRAY
FILTER –/
ߛ appears 15.4 Programming the aroma INTENSIVE
or STANDARD
Rotary switch
Turn the Rotary Switch to change the adjusted values or to
select the next programming step.
Press the Rotary Switch to check the values adjusted or to
save the values selected (Fig. 17).
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.
Ⅲ
READY
15.1 Programming the filter
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Refer to Chapter 5.1 «Inserting the filter».
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
15.2 Programming the water hardness
Ⅲ
AROMA
Refer to Chapter 4 «Adjusting the water hardness».
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Ⅲ Press the Rotary Switch (1).
INTENSIVE
15.6 Programming the time
Ⅲ
You must programme the time if you want to use the auto-
matic switch-on function.
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ
READY
Ⅲ
STANDARD
Ⅲ Press the Rotary Switch (1) to save the setting.
AROMA
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) until TIME is displayed.
EXIT appears
Ⅲ
TIME
Ⅲ Now press the Rotary Switch (1) to start programming the time.
--:--
Ⅲ Turn the rotary Switch (1) to adjust the hours..
12:--
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Ⅲ
15.5 Programming the temperature
Ⅲ
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears activate the minutes.
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
2:05
Ⅲ Press the Rotary Switch (1) to save the setting.
TIME
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ
Ⅲ
TEMPERATURE
Ⅲ Press the Rotary Switch (1).
HIGH
Ⅲ
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
NORMAL
Ⅲ Press the Rotary Switch (1) to save the setting.
TEMPERATURE
Ⅲ
READY
Ⅲ
If the machine is disconnected from power supply, the time
must be programmed again.
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Download from Www.Somanuals.com. All Manuals Search And Download.
18
15.7 Programming the automatic switch-on time
15.8 Programming the automatic switch-off time
You must programme the time (Chapter 15.6) if you want to
use the automatic switch-on function (––:–– = inactive).
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
Ⅲ
READY
E
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until MACHINE ON is displayed.
Ⅲ The illuminated ring (2) is active.
Ⅲ
MACHINE ON
Ⅲ Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-on time.
Ⅲ
OFF AFT. HR
Ⅲ Now press the Rotary Switch (1) to start programming the
Ⅲ
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
12:--
switch-off time. Switch-off time OFF AFT. HR
Ⅲ
5.0 HR
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
1.0 HR
Ⅲ Press the Rotary Switch (1) to save the setting.
OFF AFT. HR
Ⅲ
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ
Ⅲ
12:--
Ⅲ Turn theRotary Switch (1) to select the minutes.
12:05
Ⅲ Press the Rotary Switch (1) to save the setting.
MACHINE ON
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
Ⅲ
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
Ⅲ
READY
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
15.9 Cup counter
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
This function is available with the following types of coffee:
Ⅲ
READY
a) 1 LARGE CUP
b)1 COFFEE
c) 1 ESPRESSO
d)1 powder coffee
e) 2 COFFEE
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Ⅲ
READY
Ⅲ
LANGUAGE
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Now press the Rotary Switch (1) to start programming the item
LANGUAGE.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until the required language is dis-
played.
Ⅲ Turn the Rotary Switch (1) until
CUPS MADE appears
Ⅲ For example
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ LANGUAGE
ENGLISH
Ⅲ Press the Rotary Switch (1)
Ⅲ
100
Ⅲ Press one of the draw-off keys
of individual cups made.
/
/
to check the number
(5).
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ E.g press draw-off key 1 cup of coffee
20
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
Ⅲ
READY
You can check the number of pre-ground cups of coffee by
opening the filler funnel for pre-ground coffee (11).
15.11 Programming Display 24H/AM/PM
Ⅲ
READY
Ⅲ Touch one of the symbols
made 2 cups of coffee.
/
/
to check how often you
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ To quit press the Rotary Switch (1).
CUPS MADE
Ⅲ The illuminated ring (2) is active.
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) until
DISPLAY appears
EXIT appears
Ⅲ Press the Rotary Switch (1)
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
READY
Ⅲ
ML/OZ appears
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
24H/AM PM appears
15.10 Programming the language
Ⅲ Press the Rotary Switch (1)
Ⅲ
e.g. 24H
Ⅲ
READY
Ⅲ Select a setting of your choice.
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ The illuminated ring (2) is active.
Ⅲ
DISPLAY
Ⅲ Turn the Rotary Switch (1) until LANGUAGE is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Ⅲ
READYM
E
15.12 Programming the display for ML/OZ
16. Maintenance
Ⅲ
READY
16.1 Filling in water
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ
FILL
WATER
Ⅲ The illuminated ring (2) is active.
If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 2.3.
Ⅲ Turn the Rotary Switch (1) until
DISPLAY appears
Ⅲ Press the Rotary Switch (1)
Ⅲ
READY
Ⅲ
ML/OZ appears
Ⅲ Press the Rotary Switch (1)
e.g. ML
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
Ⅲ
Ⅲ Select a setting of your choice.
Ⅲ Press the Rotary Switch (1) to save the setting.
16.2 Emptying the coffee grounds container
Ⅲ
DISPLAY
Ⅲ
EMPTY
GROUNDS
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
If this message appears on the display, you can no longer
draw off coffee. You must empty the coffee grounds con-
tainer (18) first (Fig. 13).
Ⅲ
READY
15.13 Exit programming mode
Ⅲ Carefully take out the drip tray (20), it is filled with water.
Ⅲ
READY
Ⅲ
NO
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears TRAY
Ⅲ Insert the empty and clean trip tray (20) again.
READY
Ⅲ The illuminated ring (2) is active.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
21
The red water level indicator appears when the drip tray (20)
is full.
16.6 Cleaning the IMPRESSA
After 200 draw-off operations or after 80 rinsing operations, the
IMPRESSA must be cleaned. A message appears on the display,
telling you to start the cleaning programme. You can still draw off
coffee or hot water/steam. However, we recommend that you
should clean the machine (Chapter 17) within the next few days.
16.3 Drip tray missing
Ⅲ
NO
TRAY
Ⅲ If this information is displayed, the drip tray (20) is not installed
properly or was not installed at all.
Ⅲ
CLEAN MACHINE / MACHINE READY
Ⅲ Insert the drip tray (20).
16.7 IMPRESSA calcified
Ⅲ
READY
During operation, the machine will calcify. The degree of scaling
depends on the hardness of the water in your region. The machine
will inform you when de-scaling is required. You can still draw off
coffee or hot water/steam. However, we recommend that you
should de-scale the machine (Chapter 18) within the next few days.
16.4 Fill coffee beans
Ⅲ
FILL
BEANS
Ⅲ Refill beans as described in Chapter 2.4.
Ⅲ
MACHINE CALCIFIED / MACHINE READY
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
16.8 General cleaning instructions
Ⅲ Never use scratching objects, pan cleaners, cleaning sponges or
caustic chemicals to clean the machine.
We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before cleaning the tank,
switch off the IMPRESSA.
Ⅲ Wipe off the case on the inside and outside using a soft, moist
cloth.
Ⅲ Clean the replaceable hot water nozzle after each use.
16.5 Replacing the filter
Ⅲ To ensure that the Professional Cappuccino Frother functions
perfectly, you should rinse it with water each time after pre-
paring milk.
After drawing off 50 litres, the filter cartridge will be used
up. A message requesting you to replace the filter will appear
on the display.
Ⅲ To ensure that the Professional Cappuccino Frother functions
perfectly, you should clean it daily if you have prepared milk.
Refer to Chapter 5.2 «Replacing the filter».
Ⅲ The water tank should be rinsed daily and refilled with fresh
water.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
If the water tank shows signs of scaling, remove the scaling
using a commercial de-scaling agent. Take out the water
tank (Fig. 4).
Once started, the de-scaling operation must not be inter-
rupted!
After each cleaning operation the filler funnel for pre-ground
coffee should be cleaned (11).
Remove the CLARIS plus filter cartridge, if installed, before
de-scaling the water tank.
E
Ⅲ
READY
CLEAN
16.9 Emptying the system
Ⅲ Touch the
symbol (7).
EMPTY
TRAY
Ⅲ Empty the tray (20).
Precondition: IMPRESSA switched off
Ⅲ
This operation is required to protect the IMPRESSA against
frost damage during transports.
Ⅲ
NO
TRAY
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(15) (Fig. 10).
Ⅲ Insert the tray (20) again.
Ⅲ Remove the drip grate (19).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the steam position (Fig. 20).
Ⅲ Put a container (1 l, Fig. 11) under the adjustable coffee spout
(17).
Ⅲ
OPEN TAP
Ⅲ Press the Rotary Switch (1)
Ⅲ
PRESS
Ⅲ
Ⅲ
EMPTYING
CLOSE TAP
MAINT.
Ⅲ Touch the
symbol (7).
Ⅲ The IMPRESSA is switched off.
Ⅲ
Ⅲ
CLEANING
FILL
17. Cleaning
TABLET
Your IMPRESSA features an integrated cleaning program. The
cleaning operation will take some 15 min.
Ⅲ Fill in the tablet (see Fig. 14)
Ⅲ
PRESS
MAINT.
Original JURA cleaning tablets which are specially designed
for the cleaning program of your IMPRESSA are available at
your authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Ⅲ Touch the
symbol (7).
Ⅲ
Ⅲ
CLEANING
EMPTY
TRAY
Download from Www.Somanuals.com. All Manuals Search And Download.
23
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.
Ⅲ
Ⅲ
NO
TRAY
READY
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
Ⅲ The cleaning operation was completed successfully.
When using the de-scaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
17.1 Cleaning without display request
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears. In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
MACHINE CALCIFIED / MACHINE READY
Ⅲ
RINSE
Ⅲ Remove the Professional Cappuccino Frother (15).
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Touch the
symbol (7).
EMPTY
TRAY
Ⅲ Empty the tray (20).
CLEAN appears.
Ⅲ
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ
EMPTY TRAY
Ⅲ The program “Clean” is now active. Now proceed as described
Ⅲ
NO
TRAY
in Chapter 17 from
EMPTY TRAY onwards.
Ⅲ Insert the tray (20) again.
18. De-scaling
Ⅲ
AGENT
IN TANK
Your IMPRESSA features an integrated de-scaling program. The
cleaning operation will take some 40 min.
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
Original JURA de-scaling tablets which are specially de-
signed for the de-scaling program of your IMPRESSA are
available at your authorized dealer. Please note that machine
defects or residues in the water cannot be excluded if you
use inappropriate de-scaling agents.
Ⅲ
OPEN TAP
AGENT
IN TANK
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Ⅲ Place a receptacle under the hot water spout (Fig. 18).
Ⅲ Open the steam / hot water draw-off valve (14) (Fig. 12).
Ⅲ
PRESS
MAINT.
Ⅲ Touch the
symbol (7).
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
Ⅲ
Ⅲ
RINSING
READY
Ⅲ Close the steam / hot water draw-off tap (14).
E
Ⅲ The de-scaling operation was completed successfully.
Ⅲ
Ⅲ
DE-SCALING
EMPTY
TRAY
18.1 Decalcifying without display request
Ⅲ Empty the tray (20).
Decalcifying without display request is only possible if the
CLARIS plus filter is NOT programmed.
Ⅲ
NO
TRAY
Ⅲ Press the Rotary Switch (1) until
Ⅲ Insert the tray (20) again.
FILTER – appears.
Ⅲ
FILL
Ⅲ Turn the Rotary Switch (1) until
WATER
MAINTENANCE appears.
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
RINSE
Ⅲ Turn the Rotary Switch (1) until
Ⅲ
OPEN
TAP
DECALC. ON appears.
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ
EMPTY TRAY
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
Ⅲ The program “De-scale” is now active. Now proceed as de-
scribed in Chapter 18 from
EMPTY TRAY onwards.
Ⅲ After you have closed the steam / hot water draw off tap (14),
the following message is displayed
19. Disposal
Ⅲ
Ⅲ
DE-SCALING
Please dispose of old machines in an environmentally
neutral way.
EMPTY
TRAY
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
Ⅲ Empty the tray (20).
Ⅲ
NO
TRAY
Ⅲ Insert the tray (20) again.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
20. Tips for perfect coffee
Height-adjustable coffee spout (17)
You can adjust the height of the coffee spout to the size of your
cups (Fig. 3)
Grinding degree
Refer to Chapter 2.5 «Adjusting the grinding gear».
Preheating cups
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
Sugar and cream
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
21. Messages
Cause
Remedy
FILL WATER
Water tank is empty.
Float defective
Refill water
E
Rinse or de-scale water tank
Refill beans
FILL BEANS
Bean tank is empty.
Although you have refilled beans, the
message still appears.
Draw off a cup of coffee. The message will
disappear only after you have drawn off a cup
of coffee
EMPTY GROUNDS
NO TRAY
Coffee grounds container full
Empty coffee grounds container
Wait 10 sec. before reinstalling the tray
Install tray properly
Tray reinstalled too early after emptying
Drip tray not installed properly or missing
Cleaning required
CLEAN MACHINE /
MACHINE READY
Start cleaning programme (Chapter 17)
MACHINE CALCIFIED /
MACHINE READY
De-scaling required
Filter used up
Start de-scaling programme (Chapter 18)
Replace filter (Chapter 5.2)
CHANGE FILTER /
MACHINE READY
ERROR
General fault
- switch off
- disconnect from mains supply
- Connect IMPRESSA to power supply
- Switch on IMPRESSA
- Have IMPRESSA checked by JURA
- Service
Download from Www.Somanuals.com. All Manuals Search And Download.
27
22. Problems
Problem
Cause
Remedy
Very loud noise coming from the
grinding gear
Foreign body in grinding gear
Drawing off pre-ground coffee still possible
Have IMPRESSA checked by JURA Service
Too little foam when
frothing the milk
Professional Cappuccino Frother has
become dirty
Clean the Professional Cappuccino Frother
(Chapter 13)
Individual parts of the Professional
Cappuccino Frother are incorrectly
assembled
Check correct assembly of the
Professional Cappuccino Frother
Coffee only drips
from the coffee spout
Grinding degree too fine
Pre-ground coffee too fine
Coarser grinding gear adjustment
Use a coarser pre-ground coffee
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
23. Legal information
24. Technical data
Voltage:
These operating instructions contain all the information required
for using, operating and maintaining the machine properly.
230V AC
1450 W
10 A
Power:
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such an agreement, consent or legal relationship. Any
obligations to be fulfilled by JURA Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
Intensity of current:
Safety check:
E
Energy consumption Standby:
approx. 3.5 Wh
Energy consumption
«Ready for draw-off» mode:
approx. 11.5 Wh
static, max. 15 bar
1.9 litres
Pump pressure:
Water tank:
Bean tank capacity:
Coffee grounds container capacity :
Length of cable:
Weight:
200gr
max. 16 portions
approx. 1.1 m
9.1 kg
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without JURA Elektroapparate AG’s written approval.
Size (WxHxD):
28 x 34.5 x 44.5 cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 "Low Voltage Directive" including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 "EMC Directive" including
Modification Directive 92/31/EWG
Download from Www.Somanuals.com. All Manuals Search And Download.
29
|