IMPRESSA Xs90 / Xs95
Instructions for use
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 5
Fig. 9
Fig. 13
Fig. 2
Fig. 3
Fig. 4
Fig. 8
Fig. 12
Fig. 6
Fig. 7
2
3
1
Fig. 10
Fig. 11
Fig. 14
Fig. 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
16
17
18
1. Drip tray
2. Drip grate
15
14
3. Programming door
4. Rotary Switch
5. Selection key for pre-ground coffee
6. Coffee à la Carte key
7. 1 Coffee key
19
20
21
13
12
11
8. 2 Coffees key
10
9. 1 Espresso key
9
8
22
23
24
25
10. 2 Espressos key
7
11. ON / OFF key
12. Rinse key
13. Display dialog system
14. Water tank with handle
15. Aroma preservation cover
16. Bean tank cover
3
17. Lid for pre-ground coffee filler funnel
18. Height-adjustable coffee spout
19. Heatable cup shelf
20. Constant Steam key
21. Steam Portion key
22. Hot Water switch
23. Pivoting steam spout
24. 2-stage frothing jet
25. Height-adjustable hot water spout
26. Coffee grounds bin
27. Power switch
27
6
5
4
26
2 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
13.3 Maintenance ............................................page 14
13.4 Programming the amount of powder for coffee
1. Safety information ..............................................page
6
6
6
6
6
6
7
7
7
7
7
8
8
9
9
9
1.1
1.2
Warnings ................................................page
Precautions..............................................page
and espressso............................................page 14
13.5 Setting the amount of water for coffee,
2. Before you start using the IMPRESSA ....................page
espresso and coffee à la carte........................page 15
2.1
2.2
2.3
2.4
2.5
2.6
Checking the mains voltage ..........................page
Checking electrical fuse...............................page
Filling the water tank .................................page
Filling the bean tank...................................page
Adjusting the grinding gear ..........................page
Power switch............................................page
13.6 Programming the temperature for coffee,
E
espresso and coffee à la carte........................page 16
13.7 Programming the water portion.....................page 16
13.8 Programming the steam portion ....................page 16
13.9 Economy mode..........................................page 17
13.10 Setting the time ........................................page 18
13.11 Programming the automatic switch-on time......page 18
13.12 Programming the automatic switch-off time .....page 19
13.13 Programming the language ..........................page 19
13.14 Programming the display.............................page 19
13.15 Information..............................................page 20
14. Lock functions....................................................page 21
14.1 Locking/releasing the drawing of coffee
3. First use ...........................................................page
3.1
Cup illumination........................................page
4. Adjusting your machine to the water hardness.............page
5. Using a CLARIS plus filter cartridge........................page
5.1
5.2
Installing the filter.....................................page
Changing the filter .....................................page
6. Rinsing the machine.............................................page 10
7. Making coffee (1 espresso, 2 espressos, 1 coffee,
à la carte.................................................page 21
2 coffees)..........................................................page 10
7.1. Making coffee with pre-ground coffee powder....page 10
8. Making coffee à la carte .......................................page 11
9. Making hot water................................................page 11
10. Drawing off steam ...............................................page 12
11. Frothing milk.....................................................page 12
11.1 Frothing one portion of milk (with the
14.2 Locking the programming function.................page 21
15. Maintenance......................................................page 21
15.1 Filling the water tank .................................page 21
15.2 Emptying the coffee grounds.........................page 22
15.3 Emptying the drip tray................................page 22
15.4 Drip tray missing.......................................page 22
15.5 Filling the bean tank...................................page 22
15.6 Removing stones from the grinding gear ..........page 22
15.7 Changing the filter .....................................page 23
15.8 Prompt to run cleaning cycle ........................page 23
15.9 Prompt to run decalcifying cycle....................page 23
15.10 Emptying the system ..................................page 23
15.11 General cleaning instructions ........................page 24
16. Cleaning ...........................................................page 24
17. Decalcifying.......................................................page 25
18. Disposal............................................................page 26
19. Tips for perfect coffee...........................................page 26
20. Problems ..........................................................page 27
21. Legal information ...............................................page 28
22. Technical data....................................................page 28
2-stage frothing jet) ...................................page 12
11.2 Frothing milk (with the 2-stage frothing jet) .....page 12
11.3 Attaching the Professional-Cappuccino Frother
to the IMPRESSA .....................................page 13
11.4 Making cappuccino and hot milk with the
Professional-Cappuccino Frother ...................page 13
11.5 Cleaning the Professional-Cappuccino Frother
and jet....................................................page 13
12. Switching the IMPRESSA off ................................page 13
13. Programming.....................................................page 14
13.1 Programming the filter ...............................page 14
13.2 Programming your machine to the correct
water hardness (only with FILTER NO) ...........page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Ⅲ Never immerse the IMPRESSA in water.
Before you begin
Congratulations on having bought this IMPRESSA!
1.2.Precautions
In order to ensure perfect operation of your IMPRESSA, carefully
read this operating manual and keep it for future reference.
Should you need more information or meet with particular prob-
lems not specified in these operating instructions in sufficient
detail, please contact JURA Elektroapparate AG directly or your
local authorized dealer.
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to any
water that may leak. Never stand on hot or warm surfaces (oven
hobs). Keep out of the reach of children.
Ⅲ If you intend not to use the machine for a longer time (holidays,
etc.), always turn off the power switch.
You will also find useful tips on operation and maintenance
Don’t forget to check out the knowledge builder – our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
Ⅲ Always turn off the power switch before cleaning the machine.
Ⅲ When disconnecting the mains cable, never pull on the mains
cable or the machine itself.
Ⅲ The IMPRESSA is connected to the mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Keep out
of reach of children and pets.
Ⅲ Never put the coffee machine or parts of it into a dishwasher.
Ⅲ Make sure to install the machine at a place with sufficient air
circulation to prevent it from overheating.
1. Safety information
1.1 Warnings
2. Before you start using the IMPRESSA
2.1 Checking the mains voltage
Ⅲ Children are not aware of the dangers involved in using electric
appliances. Therefore, never leave the machine unattended with
unsupervised children around.
The coffee machine is preset to the correct mains voltage. Check if
your local mains supply voltage complies with the information giv-
en on the type plate on the underside of the coffee machine.
Ⅲ The coffee machine must only be used by persons who know
how to operate it.
Ⅲ Never use a defective machine or a machine with a defective
mains cable.
2.2 Checking electrical fuse
Ⅲ Never repair or open the coffee machine yourself. Repairs may
only be carried out by authorized service shops using original
spare parts and accessories.
The machine is designed for an electric current of 10 amperes.
Check if the electrical fuse has sufficient capacity.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Ⅲ Open the lid of the bean tank (16).
2.3 Filling the water tank
Ⅲ To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to
the required position.
Only use fresh, cold water. Never fill the water tank with
milk, mineral water or other liquids.
The smaller the dots, the finer the grind
The larger the dots, the coarser the grind
Ⅲ Take out the water tank and thoroughly rinse it out with cold tap
water.
E
2.6 Power switch
Ⅲ Then fill it with water and place it back into the coffee machine.
Make sure the tank is installed correctly and that it engages
properly.
Actuate the power switch (27) on your IMPRESSA before
using the machine for the first time.
We recommend that you switch off your IMPRESSA with
the power switch (27) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
2.4 Filling the bean tank
To ensure your IMPRESSA will have a long service life and
to avoid repairs, please note that the grinding gear is not suit-
able for coffee beans that have been treated with additives
(e.g. sugar) during or after roasting. Coffee blends of this
type may damage the machine’s grinding gear. Repair costs
resulting from such use are not subject to the terms of guar-
antee.
3. First use
Ⅲ Press the power switch (27) on the back (bottom left) of the
machine (Fig. 3).
Ⅲ The ON / OFF key
(11) lights up to indicate that the machine
has been switched on with the power switch.
Ⅲ Open the cover of the bean tank (Fig. 2) and remove the aroma
Ⅲ Switch the machine on using the ON / OFF key
(11). The
preservation cover (15).
light of the ON / OFF key goes off.
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Open the programming door (3).
Ⅲ Fill the bean tank with coffee beans (Fig. 2), replace the aroma
Ⅲ
LANGUAGE
ENGLISH
preservation cover (15) and close the lid.
Ⅲ Turn the Rotary Switch (4) until the required language is dis-
played.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use:
Ⅲ Example:
Ⅲ
LANGUAGE
ENGLISH
a finer setting ꢀ for a lighter roast
a coarser setting ꢀ for a darker roast
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
FILL SYSTEM / PRESS STEAM
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Ⅲ Place a receptacle under the 2-stage frothing jet (24) and press
one of the Steam keys
4. Adjusting your machine to the water hardness
.
The IMPRESSA heats up water. As a result, calcification
occurs during normal use. This is indicated automatically.
The IMPRESSA must therefore be adjusted to the hardness
of the water used. Use the supplied test sticks to determine
the water hardness or contact your local waterworks.
Ⅲ The system now fills up automatically. A little water will leak
from the frothing jet.
Ⅲ
Ⅲ
Ⅲ
SYSTEM FILLING
HEATING UP
PRESS RINSE
1° German hardness is equivalent to 1.79° French hardness.
Ⅲ Place a cup under the height-adjustable coffee spout (18).
Ⅲ Press Rinse
.
The water hardness programming step is no longer displayed
if the filter is activated.
Ⅲ
MACHINE RINSING
Ⅲ Now the water lines are flushed with fresh water. A little water
will leak from the coffee spout (18).
The IMPRESSA is preset to 16°dH. This setting can be changed.
To do so, proceed as follows:
Ⅲ
SELECT PRODUCT
Ⅲ You can now make a product of your choice by pressing the
corresponding key.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
If FILL BEANS appears on the display, press one of the
coffee product keys again. The grinder is not yet completely
filled with coffee beans.
Ⅲ
FILTER NO
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
For a perfect frothing result, adjust the height-adjustable
coffee spout (18) to the size of your cup (Fig. 4).
Ⅲ
HARDNESS
16°dH
Ⅲ Now press the Rotary Switch (4) to start programming.
3.1 Cup illumination
Ⅲ
16°dH
The cup illumination puts your coffee in a good light, making it a
treat for the eyes as well.
When you switch on the IMPRESSA or press any key, the cup illu-
mination is activated for 1 minute.
ⅥⅥⅥⅪⅪ
Ⅲ Now turn the Rotary Switch (4) until the required water hardness
is set.
Ⅲ
20°dH (example)
ⅥⅥⅥⅥⅪ
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ
HARDNESS
20°dH (example)
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Ⅲ Now turn the Rotary Switch (4) until the following message is
Ⅲ Close the cartridge holder until it engages audibly.
displayed:
Ⅲ Fill the water tank (14) with cold, fresh tap water and place it
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
back into the machine.
Ⅲ Place a sufficiently large receptacle (min. 0.5 litres) under the
pivoting steam spout (23) and press one of the Steam keys
to start the filter rinsing process.
Ⅲ
E
Ⅲ
FILTER RINSING
5. Using a CLARIS plus filter cartridge
Ⅲ Filter rinsing stops automatically.
When using the CLARIS plus filter cartridge correctly, de-
calcifying your IMPRESSA will no longer be necessary. For
more information on the CLARIS plus filter cartridge refer
to the brochure “CLARIS plus. Hard on limescale. Gentle on
your coffee machine.”
Ⅲ
SELECT PRODUCT
You have now activated the filter. The programming step for
adjusting your machine to the correct water hardness is
therefore no longer displayed.
5.1 Installing the filter
The water might be slightly discoloured (no hazard to
health).
Ⅲ Open the programming door (3). Press the Rotary Switch (4) un-
til you hear an acoustic signal.
5.2 Changing the filter
Ⅲ
FILTER
NO
After 50 litres of water the filter cartridge will need to be
replaced. The display will prompt you to change the filter.
Please monitor the period of use of the CLARIS plus filter
cartridge (max. 2 months) using the scale on the cartridge
holder by the water tank.
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
FILTER
YES
Ⅲ
SELECT PRODUCT / CHANGE FILTER
Ⅲ The Rinse key lights up. Press Rinse
INSERT FILTER / PRESS STEAM
Ⅲ Confirm your setting by pressing the Rotary Switch (4).
.
Ⅲ
INSERT
FILTER / PRESS STEAM
Ⅲ
Ⅲ Remove the water tank (14) from the IMPRESSA. Empty out
any remaining water. Fold up the cartridge holder (Fig. 1).
Attach the extension piece to the top of the CLARIS plus filter
cartridge. Now insert the filter cartridge in the water tank, apply-
ing gentle pressure (Fig. 1)
Ⅲ Take out the water tank (14). Empty out any remaining water.
Fold up the cartridge holder (Fig. 1). Attach the extension piece
(contained in the Welcome Pack) to the top of the CLARIS plus
filter cartridge. Now insert the filter cartridge in the water tank,
applying gentle pressure (Fig. 1)
Ⅲ Close the cartridge holder until it engages audibly.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
process (I.P.B.A.S.) moistens the coffee powder, briefly inter-
rupts the flow of hot water and then begins with the actual brew-
ing process.
Ⅲ Fill the water tank (14) with cold, fresh tap water and place it
back into the machine.
Ⅲ Place a sufficiently large receptacle (min. 0.5 litres) under the
pivoting steam spout (23) and press one of the Steam keys
to start the filter rinsing process.
Ⅲ
1 ESPRESSO (example)
NORMAL (example)
Ⅲ The coffee brewing process stops automatically as soon as the
Ⅲ
FILTER RINSING
set amount of water has run through.
Ⅲ Filter rinsing stops automatically.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
To stop the brewing process prematurely, press any of the
product keys.
You can also trigger a change of filter manually from the
Maintenance menu at any point in time (only if the filter has
been activated) - see Chapter 13.3.
You can change the amount of water while the machine is
brewing coffee. Open the programming door. Turn the
Rotary Switch (4) until the display indicates the required
amount (ML). The amount of water can be selected in incre-
ments of 5 ML.
6. Rinsing the machine
If the coffee machine is switched off and has cooled down,
you will be prompted to start a rinsing cycle when switching
the machine back on. The rinsing cycle starts automatically
when you switch the machine off.
The amounts given in ML are approximate values and may
vary from the effective quantity.
Ⅲ
PRESS RINSE
7.1. Making coffee with pre-ground coffee powder
Ⅲ Place a cup under the coffee spout (18).
Ⅲ Press Rinse
.
Never use water-soluble instant coffee.
Ⅲ
Ⅲ
MACHINE RINSING
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
You can also trigger a rinsing cycle manually from the Main-
tenance menu at any point in time (see Chapter 13.3).
Ⅲ Place 1 or 2 cups (as required) under the coffee spout (18) and
open the programming door (3). Press the selection key for pre-
ground coffee
FILL
POWDER / SELECT PRODUCT
.
Ⅲ
7. Making coffee
(1 espresso, 2 espressos, 1 coffee, 2 coffees)
Ⅲ Now fill 1 or 2 level scoops of pre-ground coffee into the filler
funnel for pre-ground coffee (17).
Ⅲ
SELECT PRODUCT
Ⅲ Place 1 or 2 cups (as required) under the coffee spout (18) and
press a key of your choice . The pre-brewing
Ⅲ Then press a product key of your choice.
,
,
,
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Ⅲ Turn the Rotary Switch (4) until the display indicates the desired
coffee strength and press the Rotary Switch (4) to make the cof-
fee. The pre-brewing process (I.P.B.A.S.) moistens the coffee
powder, briefly interrupts the flow of hot water and then begins
with the actual brewing process.
Ⅲ
1 ESPRESSO (example)
POWDER
Ⅲ The coffee brewing process stops automatically as soon as the
set amount of water has run through.
Ⅲ
SELECT PRODUCT
Ⅲ
A LA CARTE
E
XSTRONG (example)
To stop the brewing process prematurely, press any of the
product keys.
Ⅲ The coffee brewing process stops automatically as soon as the
set amount of water has run through.
We recommend always using powder from fresh coffee
beans or pre-ground, vacuum-packed coffee. Never fill in
more than 2 scoops of powder. The filler funnel is no storage
tank. Make sure the coffee powder you use is not too fine.
This may block the system and cause the coffee only to drip
out of the coffee spout.
Ⅲ
SELECT PRODUCT
To stop the brewing process prematurely, press any of the
product keys.
You can change the amount of water while the machine is
brewing coffee. To do so, turn the Rotary Switch (4) until the
display indicates the required amount (ML). The amount of
water can be selected in increments of 5 ML.
If you have pressed the selection key
unintentionally,
press any of the product keys to cancel your selection.
You can change the amount of water while the machine is
brewing coffee. To do so, turn the Rotary Switch (4) until the
display indicates the required amount (ML). The amount of
water can be selected in increments of 5 ML.
The amounts given in ML are approximate values and may
vary from the effective quantity.
9. Making hot water
The amounts given in ML are approximate values and may
vary from the effective quantity.
Ⅲ
SELECT PRODUCT
Ⅲ Place 1 cup or 1 glass under the hot water spout (25) and turn the
Hot Water switch (22) to
.
8. Making coffee à la carte
Ⅲ
WATER
PORTION
Ⅲ
SELECT PRODUCT
Ⅲ The machine stops dispensing water automatically as soon as the
set amount of water has been dispensed.
Ⅲ Place 1 cup under the coffee spout (18) and open the program-
ming door (3). Press the Coffee à la Carte key
.
Ⅲ
CLOSE TAP
Ⅲ Turn the switch (22) back to
SELECT PRODUCT
Ⅲ
A LA CARTE
XMILD
.
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
11
To stop the process prematurely, turn the switch (22) back
to
Ⅲ Place a cup under the pivoting steam spout (23) and dip the
2-stage frothing jet (24) in the milk to be frothed or the liquid to
be heated.
.
You can also change the amount of water set while the
machine is brewing coffee. Open the programming door.
Turn the Rotary Switch (4) until the display indicates the
required amount (ML). The amount of water can be selected
in increments of 5 ML.
Ⅲ Press the Steam Portion key
STEAM PORTION
Ⅲ You can stop the process any time by pressing the Steam Portion
key
.
Ⅲ
.
Ⅲ
SELECT PRODUCT
The amounts given in ML are approximate values and may
vary from the effective quantity.
You can set the duration of drawing off steam in 1-second
increments with the Rotary Switch (4).
10. Drawing off steam
11. Frothing milk
Make sure the nozzle has engaged properly. If the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
The IMPRESSA is ready to froth milk when both Steam key lights
light up constantly.
If the lights are off, press one of the two Steam keys
.
To ensure perfect operation, clean the 2-stage frothing jet
(24) regularly. Use the opening provided on the handle of the
measuring spoon for the purpose to unscrew the 2-stage
frothing nozzle (Fig. 14). Thoroughly rinse the 3 parts under
running water.
11.1 Frothing one portion of milk
(with the 2-stage frothing jet)
Ⅲ
SELECT PRODUCT
Ⅲ Pour milk into a jug or similar receptacle.
Steam can be used for heating liquids and frothing milk for
cappuccino. When heating liquids, make sure the 2-stage
frothing jet (24) is pushed up. To froth liquids, push the
2-stage frothing jet (Fig. 5) downwards, turning it slightly.
Ⅲ Dip the 2-stage frothing jet (24) into the milk and press the
key.
Ⅲ
STEAM PORTION
Ⅲ The steam dispensing process stops automatically.
A small amount of water leaks from the jet when you start
frothing. This does not affect the result, e.g. when frothing
milk.
There might be some initial splashing when drawing off
steam. The steam jet gets hot. Avoid direct contact with the
skin!
11.2 Frothing milk
(with the 2-stage frothing jet)
Ⅲ
SELECT PRODUCT
Ⅲ Pour milk into a jug or similar receptacle.
Ⅲ
SELECT PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
12
11.5 Cleaning the Professional-Cappuccino Frother
and jet
Ⅲ Dip the 2-stage frothing jet (24) into the milk and press the
key.
Ⅲ
DRAW OFF STEAM
After heating or frothing milk, you should clean the Profes-
sional-Cappuccino Frother. We recommend cleaning it on a
daily basis.
Ⅲ When you have frothed the milk to your liking, pres the
key
again.
E
Your IMPRESSA will not prompt you to clean the Profes-
sional-Cappuccino Frother.
11.3 Attaching the Professional-Cappuccino Frother
to the IMPRESSA
The Professional-Cappuccino Frother and the Easy-Cappuc-
cino Frother are best cleaned using the JURA Auto-Cappuc-
cino cleaner. Please contact an authorized dealer. We recom-
mend cleaning these devices daily.
Ⅲ Remove the 2-stage frothing jet (24).
Ⅲ Now attach the Professional-Cappuccino Frother (Fig. 6).
Ⅲ Press the hose into one side of the opening behind the dial
(Fig. 7).
Ⅲ Fill water into a receptacle and dip the milk hose into it.
11.4 Making cappuccino and hot milk with the
Professional-Cappuccino Frother
Ⅲ Draw steam until the water / steam from the Frother runs clear.
We also recommend regularly disassembling the Frother and
rinsing it under running water.
Ⅲ Fill the milk pitcher with milk or dip the milk hose directly into
the milk.
Ⅲ Place a cup under the Professional-Cappuccino Frother.
Ⅲ Remove the Professional-Cappuccino Frother from the IMPRES-
SA and take it apart as shown in Fig. 8.
Ⅲ Press the Steam Portion key
STEAM PORTION
.
Ⅲ Thoroughly rinse all the parts of the Professional-Cappuccino
Frother under running water.
Ⅲ
Ⅲ The machine will froth or heat milk according to the time you
programmed (see “Programming the steam portion”, Chapter
13.8)
Ⅲ Re-assemble the Professional-Cappuccino Frother and attach it
to your IMPRESSA.
Ⅲ For cappuccino, turn the selector switch (1, Fig. 7) to (2).
Ⅲ For hot milk, turn the selector switch (1, Fig. 7) to (3).
12. Switching the IMPRESSA off
Switching the IMPRESSA off causes the coffee spout to be rinsed
first. Therefore, please make sure to place a suitable receptacle un-
der the coffee spout (18).
Ⅲ Now place the cup with the cappuccino froth or hot milk under
the coffee spout (18) and make a coffee of your choice.
Ⅲ
SELECT PRODUCT
Ⅲ Switch the IMPRESSA off with the ON / OFF key
(11).
Download from Www.Somanuals.com. All Manuals Search And Download.
13
13.3 Maintenance
Ⅲ
MACHINE RINSING
Ⅲ The coffee spout (18) is rinsed.
You can activate the following maintenance functions from this
program item:
13. Programming
RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE,
CHANGE FILTER.
The IMPRESSA leaves the factory with a number of default
settings that allow you to make coffee without having to pro-
gram the machine first. You can, however, adjust various
parameters to make the coffee suit your personal taste.
“DE-SCALE machine” is not displayed if you are using a CLARIS
plus filter and the filter is set to “YES”.
“CHANGE FILTER” is not displayed if you are not using a
CLARIS plus filter and the filter is set to “NO”.
The following parameters can be adjusted:
Ⅲ
SELECT PRODUCT
ț Filter
ț Water hardness
ț Rinse
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
ț Powder quantity
ț Water quantity
ț Temperature
ț Water portion
ț Steam portion
ț Economy mode
ț Time
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
RINSE
Ⅲ Now press the Rotary Switch (4) to start programming.
ț Automatic switch-on time
ț Automatic switch-off time
ț Language
Ⅲ
RINSE
MACHINE
Ⅲ Turn the Rotary Switch (4) until the required maintenance func-
tion (for selection see above) is displayed. Press the Rotary
Switch (4) to activate the function.
ț Display
ț Information (to be viewed only)
13.1 Programming the filter
The Maintenance menu closes automatically after 5 seconds
if no function is selected.
Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
13.4 Programming the amount of powder for coffee
and espresso
13.2 Programming your machine to the correct
water hardness (only with FILTER NO)
You can adjust the amount of powder for coffee and espresso
separately.
Please refer to Chapter 4 “Adjusting your machine to the water
hardness”.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
13.5 Setting the amount of water for coffee,
espresso and coffee à la carte
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte
145 ml). However, these can be modified as required.
Ⅲ
FILTER
NO or YES
E
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4) un-
Ⅲ
POWDER
til you hear an acoustic signal.
QUANTITY
Ⅲ
FILTER
NO or YES
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
SELECT
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
PRODUCT
played:
Ⅲ Then press a product key of your choice.
NORMAL (example)
ⅥⅥⅥ _ _ _ +
Ⅲ
WATER
QUANTITY
Ⅲ
–
Ⅲ Press the Rotary Switch (4) to activate the program item.
Ⅲ Now turn the Rotary Switch (4) until the required amount of
powder is set.
Ⅲ
SELECT
PRODUCT
Ⅲ
STRONG (example)
ⅥⅥⅥⅥ _ _ +
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ Press a product key of your choice.
–
Ⅲ
1 ESPRESSO (example)
60 ML
Ⅲ
POWDER
Ⅲ Turn the Rotary Switch (4) to adjust the amount of water and
QUANTITY
then confirm your setting by pressing the Rotary Switch (4).
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
WATER
QUANTITY
Ⅲ
EXIT
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
played:
Ⅲ
EXIT
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
15
13.6 Programming the temperature for coffee,
espresso and coffee à la carte
13.7 Programming the water portion
The system’s basic settings include a pre-defined amount of water
(225 ml). However, this amount can be modified as required.
You can adjust the temperature for each type of coffee
separately. The temperature can be set to 2 different levels
(NORMAL, HIGH).
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
WATER
PORTION
Ⅲ
TEMPERATURE
Ⅲ Now press the Rotary Switch (4) to start programming.
SELECT PRODUCT
Ⅲ Then press a product key of your choice.
Ⅲ Press the Rotary Switch (4) to activate the program item.
Ⅲ
PORTION
225 ML (example)
Ⅲ
Ⅲ Turn the Rotary Switch (4) to adjust the amount of water and
then confirm your setting by pressing the Rotary Switch (4).
Ⅲ
TEMPERATURE
NORMAL (example)
Ⅲ
WATER
PORTION
Ⅲ Now turn the Rotary Switch (4) until the required temperature is
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
set.
Ⅲ
TEMPERATURE
HIGH (example)
Ⅲ
EXIT
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
TEMPERATURE
Ⅲ
Ⅲ
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
13.8 Programming the steam portion
Ⅲ
EXIT
The system’s basic settings include a pre-defined steam portion (20
sec.). However, this amount can be modified as required.
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
FILTER
NO or YES
Ⅲ
ECONOMY
MODE -
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ Now turn the Rotary Switch (4) until the required economy
mode is displayed.
Ⅲ
STEAM
PORTION
E
Ⅲ
ECONOMY
MODE 2 (example)
Ⅲ Press the Rotary Switch (4) to activate the program item.
Ⅲ Confirm the selected setting by pressing the Rotary Switch (4).
Ⅲ
PORTION
20 SEC (example)
Ⅲ
ECONOMY
MODE 2 (example)
Ⅲ Turn the Rotary Switch (4) to modify the steam portion and then
confirm your setting by pressing the Rotary Switch (4).
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
STEAM
PORTION
Ⅲ
EXIT
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
EXIT
Ⅲ Press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
Ⅲ
Economy mode –
Selecting this level puts the IMPRESSA in constant stand-by
mode.
This setting allows you to make any of the products without having
to wait for the machine to heat up.
13.9 Economy mode
You can set your machine to various power saving modes.
Select this setting if you want to make a lot of coffees with
hot or frothed milk and do not want to wait for the machine
to heat up first.
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Economy mode 1
Selecting this level puts the IMPRESSA in constant stand-by mode
for making coffee. The machine is heated up separately if you need
steam for hot or frothed milk.
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
ECONOMY
MODE –
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Select this setting if you make mostly black coffees and are
prepared to wait for approx. 1 minute before being able to
draw steam.
Ⅲ
TIME
13:00 (example)
Ⅲ Press the Rotary Switch (4) to confirm the hours and to activate
the minutes.
Economy mode 2
Ⅲ
TIME
13:00
Selecting this level does not put the IMPRESSA in stand-by mode
(economy temperature). The machine heats up each time you make
coffee or need to draw steam.
The IMPRESSA switches to economy temperature 5 minutes after
you last used it.
Ⅲ Turn the Rotary Switch (4) to set the minutes.
Ⅲ
TIME
13:50 (example)
Ⅲ Press the Rotary Switch (4) to confirm the minutes.
Ⅲ
TIME
13:50
Select this setting if you make very few coffees (with or
without milk) and are prepared to wait for approx. 30 sec-
onds for the machine to get ready.
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
13.10 Setting the time
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
You must program the time if you want to use the automatic
switch-on function.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
13.11 Programming the automatic switch-on time
You must program the time if you want to use the automatic
switch-on function.
Ⅲ
FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
Ⅲ
TIME
—:—
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
TIME
—:—
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ Turn the Rotary Switch (4) to set the hours.
Ⅲ
UNIT ON
—:—
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
UNIT ON
—:—
Ⅲ
OFF AFTER
5 HRS
Ⅲ Turn the Rotary Switch (4) to set the hours.
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ
UNIT ON
E
07:00 (example)
Ⅲ
OFF AFTER
5 HRS
Ⅲ Press the Rotary Switch (4) to confirm the hours and to activate
the minutes.
Ⅲ Turn the Rotary Switch (4) to set the switch-off time.
Ⅲ
UNIT ON
07:00
Ⅲ
OFF AFTER
4 HRS (example)
Ⅲ Turn the Rotary Switch (4) to set the minutes.
Ⅲ Confirm the set switch-off time by pressing the Rotary Switch
(4).
Ⅲ
UNIT ON
07:15 (example)
Ⅲ
OFF AFTER
4 HRS
Ⅲ Press the Rotary Switch (4) to confirm the minutes.
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
UNIT ON
07:15
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
Ⅲ SELECT PRODUCT
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
13.13 Programming the language
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
If the IMPRESSA is switched off with the power switch
(27), you will need to set the time again next time you switch
the machine on. The machine will prompt you to do so.
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
13.12 Programming the automatic switch-off time
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
Ⅲ
SELECT PRODUCT
played:
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
LANGUAGE
ENGLISH
Ⅲ
FILTER
NO or YES
Ⅲ Now press the Rotary Switch (4) to start programming.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Ⅲ Turn the Rotary Switch (4) to change the time format.
Ⅲ
LANGUAGE
ENGLISH
Ⅲ
DISPLAY
AM/PM / ML
Ⅲ Turn the Rotary Switch (4) to set the language.
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
Ⅲ
LANGUAGE
ENGLISH (example)
Ⅲ
DISPLAY
AM/PM / ML
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
Ⅲ Turn the Rotary Switch (4) to change the unit of measurement.
Ⅲ
LANGUAGE
ENGLISH
Ⅲ
DISPLAY
AM/PM / OZ
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ Confirm your selection by pressing the Rotary Switch (4).
Ⅲ
EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
Ⅲ
DISPLAY
AM/PM / OZ
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
Ⅲ
played:
Ⅲ
EXIT
13.14 Programming the display
Ⅲ Now press the Rotary Switch (4) to leave the programming
This program item allows you to change the time format
from 24 hrs. to AM/PM and the units from ml (millilitres) to
oz (ounces).
mode.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
13.15 Information
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
This program item enables you to check the number of
products you made and how often you selected a specific
function.
until you hear an acoustic signal.
Ⅲ
FILTER
NO or YES
Ⅲ
SELECT PRODUCT
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ
DISPLAY
24HRS / ML
Ⅲ
FILTER
NO or YES
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ
DISPLAY
24HRS / ML
Ⅲ
INFO
Download from Www.Somanuals.com. All Manuals Search And Download.
20
The coffee à la carte button is now locked and can no longer
be used to alter the amount of powder or water for individual
beverages. To release the coffee à la carte button again, you
should proceed as follows:
Ⅲ Now press the Rotary Switch (4) to access the Information
menu.
Ⅲ
TOTAL
1000 (example)
Ⅲ Turn the Rotary Switch (4) to display how often you made
espresso, 2 espressos, 1 coffee, 2 coffees, coffee à la carte, pow-
der, water and steam.
Ⅲ Switch your machine off by pressing the ON/OFF button
Ⅲ Open the programming door (3)
.
E
Ⅲ Hold the Rotary Switch and the selection button for pre-ground
coffee pressed down at the same time and wait until OK appears
in the display.
Ⅲ Finally, the number of cleaning and decalcifying cycles and filter
changes are displayed.
Ⅲ To exit the information program, press the Rotary Switch (4).
Ⅲ
INFO
14.2 Locking the programming function
Ⅲ Now turn the Rotary Switch (4) until the following message is
Ⅲ Switch your machine off by pressing the ON/OFF button
Ⅲ Open the programming door (3)
.
displayed:
Ⅲ
EXIT
Ⅲ Hold the Rotary Switch and the coffee à la carte draw-off button
pressed down at the same time and wait until STOP appears in
the display.
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
The Rotary Switch can no longer be used to gain access to
the Programming mode. To release Programming mode
again, you should proceed as follows:
14. Lock functions
If you install your IMPRESSA in a self-service area, you
may wish to protect certain settings through a combination of
buttons. You can therefore lock the programming function
and disable the drawing of coffee à la carte.
Ⅲ Switch your machine off by pressing the ON/OFF button
Ⅲ Open the programming door (3)
.
Ⅲ Hold the Rotary Switch and the coffee à la carte draw-off button
pressed down at the same time and wait until OK appears in the
display.
14.1 Locking/releasing the drawing of coffee
à la carte
Ⅲ Switch your machine off by pressing the ON/OFF button
Ⅲ Open the programming door (3)
.
15. Maintenance
15.1 Filling the water tank
Ⅲ Hold the Rotary Switch and the selection button for pre-ground
coffee pressed down at the same time and wait until STOP
appears in the display.
Ⅲ
FILL
WATER TANK
Download from Www.Somanuals.com. All Manuals Search And Download.
21
If this information is displayed, the machine will no longer
make coffee. Refill water as described in Chapter 2.3.
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
The water tank should be rinsed out and filled with fresh
water daily. Always use fresh, cold water. Never fill the
water tank with milk, mineral water or other liquids.
15.4 Drip tray missing
Ⅲ
TRAY
MISSING
15.2 Emptying the coffee grounds
Ⅲ
EMPTY
GROUNDS
If this information is displayed, the machine will no longer
make coffee. The drip tray (1) has not been installed or not
been installed properly.
If this information is displayed, the machine will no longer
make coffee. However, the machine will still dispense hot
water and steam. Empty the coffee grounds bin (26).
Ⅲ Insert the drip tray (1) and the coffee grounds bin.
SELECT PRODUCT
Ⅲ
Ⅲ Carefully take out the drip tray (1) – which contains water – and
the coffee grounds bin (Fig. 15).
15.5 Filling the bean tank
Ⅲ
TRAY
MISSING
Ⅲ
FILL
BEANS
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA. (The tray must be removed from the
machine for at least 10 seconds).
If this information is displayed, the machine will no longer
make coffee. However, the machine will still dispense hot
water and steam. Refill beans as described in Chapter 2.4.
Ⅲ
SELECT PRODUCT
Ⅲ
SELECT PRODUCT
15.3 Emptying the drip tray
15.6 Removing stones from the grinding gear
Ⅲ
EMPTY
TRAY
Ⅲ Switch the machine off using the ON / OFF key
Ⅲ Turn the power switch (27) off.
(11).
If this information is displayed, the machine will no longer
dispense coffee or steam, and the tray must be emptied.
Ⅲ Open the lid of the bean tank (16) and remove the aroma preser-
vation cover (15).
Ⅲ Carefully take out the drip tray (1) – which contains water – and
the coffee grounds bin (Fig. 15).
Ⅲ Remove any beans with a vacuum cleaner.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Ⅲ Remove the screw in the bean tank (Fig. 9) and fold the finger
protection device up (Fig. 10).
15.9 Prompt to decalcify
Lime scale builds up in the IMPRESSA as a result of normal use.
The degree of calcification depends on the hardness of the water
you use. The IMPRESSA recognizes when you should run a decal-
cifying cycle. The machine will still make coffee, hot water and
steam. However, we recommend that you should decalcify the ma-
chine (see Chapter 16) within the next few days.
Ⅲ Insert the key (Fig. 11).
Ⅲ Now turn the key counter-clockwise until the jammed stone is
released.
E
Ⅲ Remove any remaining powder with a vacuum cleaner.
Ⅲ Fold the finger protection device (Fig. 10) down and screw it
tight.
Ⅲ
SELECT PRODUCT /
DE-SCALE MACHINE
Ⅲ Fill the bean tank with fresh beans.
After a while the display will change. You should run the decalci-
fying cycle now (see Chapter 16).
15.7 Changing the filter
After 50 litres of water the filter cartridge will need to be
replaced. The display will prompt you to change the filter.
Ⅲ
SELECT PRODUCT /
DE-SCALE NOW
Refer to Chapter 5.2 “Changing the filter”.
15.10 Emptying the system
15.8 Prompt to run cleaning cycle
Requirements: The IMPRESSA has been switched off with the
After having dispensed 220 products or after 80 rinsing cycles, the
IMPRESSA must be cleaned. You will be informed of this by a
message on the display. The machine will still make coffee, hot
water and steam. However, we recommend that you should run the
cleaning cycle (see Chapter 15) within the next few days.
ON / OFF key
(11), but the power switch (27) is still turned on.
This is necessary to protect the machine against damage
occurring during transport as a result of frost.
Ⅲ Place a receptacle under the pivoting steam spout (23).
Ⅲ
SELECT PRODUCT /
CLEAN MACHINE
Ⅲ Press one of the Steam keys
until the following message is
displayed:
After another 30 products the display will change. You should run
the cleaning cycle now (see Chapter 15).
Ⅲ
SYSTEM
EMPTYING
Ⅲ When the process has been completed, the IMPRESSA switches
itself off.
Ⅲ
SELECT PRODUCT /
CLEAN NOW
The display will read “FILL SYSTEM / PRESS STEAM” next
time you switch the machine on. For more information, please refer
to Chapter 3 “First use”.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
15.11 General cleaning instructions
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Never use sharp objects or caustic chemicals for cleaning.
Ⅲ Clean the case using a soft, damp cloth.
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
TRAY
MISSING
Ⅲ Clean the pivoting steam spout (23) after each use.
Ⅲ After heating milk, draw off some hot water to clean the inside
of the pivoting steam spout (23).
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ Remove the Professional-Cappuccino Frother to clean it
thoroughly.
Ⅲ
PRESS
RINSE
Ⅲ The water tank should be rinsed out and filled with fresh water
daily.
Ⅲ Place a sufficiently large receptacle (ca. 0.5 litres) under the
coffee spout (18).
Ⅲ Press Rinse
.
Visible calcification in the water tank can be removed using
a commercial decalcifying agent. To do so, remove the water
tank from the machine.
Ⅲ
MACHINE
CLEANING
Ⅲ You will hear an acoustic signal.
If you are using a CLARIS plus filter cartridge, remove it
from the tank first.
Ⅲ
ADD
TABLET / PRESS RINSE
Ⅲ Open the lid of the filler funnel for pre-ground coffee (17). Drop
a JURA cleaning tablet inside (Fig. 12) and close the lid.
16. Cleaning
The IMPRESSA features an integrated cleaning program. The
process takes approx.15 minutes.
Ⅲ Press Rinse
.
Ⅲ
MACHINE
CLEANING
Please contact your authorized dealer for JURA cleaning
tablets that are suitable specifically for the cleaning program
of your IMPRESSA. Please note that the use of unsuitable
cleaning agents may cause damage to your machine and
could leave unfavourable residues in the water.
Ⅲ You will hear an acoustic signal.
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
TRAY
MISSING
Once started, the cleaning process must not be interrupted.
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ
SELECT PRODUCT
CLEAN MACHINE
Ⅲ
SELECT PRODUCT
Ⅲ Press Rinse
until the following message appears:
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Ⅲ When the cleaning program has finished, take out the removable
coffee powder tank and briefly rinse it under running water.
Ⅲ Press Rinse
until the following message appears:
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
You can also trigger a cleaning cycle manually at any point
in time (see Chapter 13.3).
Ⅲ
TRAY
MISSING
E
17. Decalcifying
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
The IMPRESSA features an integrated decalcifying program. The
process takes approx.50 minutes.
back into the IMPRESSA.
Ⅲ
AGENT IN TANK /
PRESS STEAM
Lime scale builds up in the IMPRESSA as a result of normal
use. The degree of calcification depends on the hardness of
the water you use. The IMPRESSA recognizes when you
should run a decalcifying cycle. The machine will still make
coffee and hot water/steam. However, we recommend that
you should decalcify the machine within a few days after the
message was displayed.
Ⅲ Take out the water tank (14). Empty out any remaining water.
Completely dissolve the content of one blister (3 tablets) in a
receptacle containing 0.6 litres of water, and pour the mixture into
the water tank. Place the water tank back into the machine.
Ⅲ Remove the 2-stage frothing jet (24) or Professional-Cappuccino
Frother from the machine (if attached).
Please contact your authorized dealer for JURA decalcifying
tablets that are suitable specifically for the decalcifying
program of your IMPRESSA. Please note that the use of
unsuitable decalcifying agents may cause damage to your
machine and could leave unfavourable residues in the water.
Ⅲ Place a tall receptacle under the pivoting steam spout (23) and
press one of the Steam keys
.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
OPEN TAP
Remove any splashes or drops of the decalcifying agent from
sensitive surfaces, in particular surfaces made of natural
stone or wood, or take appropriate preventive measures.
Ⅲ
Ⅲ Place the receptacle under the hot water spout (25).
Ⅲ Turn the Hot Water key (22) to the symbol.
Once started, the decalcifying program must not be inter-
rupted.
Ⅲ
MACHINE
DE-SCALING
Always wait until the decalcifying agent has been used up
and the tank is empty. Never fill in additional decalcifying
agent.
Ⅲ You will hear an acoustic signal.
CLOSE TAP
Ⅲ Turn the Hot Water key (22) to the
Ⅲ
symbol.
Ⅲ
MACHINE
DE-SCALING
Ⅲ
SELECT PRODUCT
DE-SCALE MACHINE
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Ⅲ You will hear an acoustic signal.
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).
Ⅲ
TRAY
MISSING
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds bin
back into the IMPRESSA.
Ⅲ
SELECT PRODUCT
Ⅲ
FILL WATER TANK /
RINSE WATER TANK
You can also trigger a decalcifying cycle manually at any
point in time (see Chapter 13.3).
Thoroughly rinse out the water tank and fill it with fresh cold
tap water. Then place it back into the IMPRESSA.
18. Disposal
Please dispose of old machines in an environmentally
compatible way
Ⅲ
PRESS STEAM
Ⅲ Place a receptacle under the pivoting steam spout (23).
Ⅲ Press one of the Steam keys
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
OPEN TAP
19. Tips for perfect coffee
Ⅲ
Height-adjustable coffee spout (18)
You can adjust the height of the coffee spout to the size of your
cups.
Ⅲ Place the receptacle under the hot water spout (25).
Ⅲ Turn the Hot Water key (22) to the symbol.
Ⅲ
MACHINE
DE-SCALING
Grinding degree
Refer to Chapter 2.5 “Adjusting the grinding gear”.
Ⅲ You will hear an acoustic signal.
CLOSE TAP
Ⅲ Turn the Hot Water key (22) to the
Preheating cups
Ⅲ
The machine features a heatable cup shelf (19). You can, however,
additionally preheat the cups with hot water. The smaller the quan-
tity of coffee you make, the more important preheating is.
symbol.
Ⅲ
MACHINE
DE-SCALING
Sugar and cream
Stirring causes heat to be released. Adding refrigerated cream or
milk will reduce the temperature of the coffee significantly.
Ⅲ You will hear an acoustic signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
20. Problems
Problem
Cause
Remedy
Grinding gear makes a very loud noise
Too little froth when frothing milk
Coffee only drips from the coffee spout
Foreign body in the grinding gear
Professional Cappuccino Frother clogged
Grinding degree too fine
Pre-ground coffee too fine
Please refer to Chapter 14.6
Clean frother (Chapter 11.5)
Adjust grinding gear to coarser grind
Use a coarser type of pre-ground coffee
Clean metal contacts
E
Display constantly indicates ‘Tray missing‘
Soiled metal contacts at rear of drip
tray (Fig. 13)
‘Fill beans’ not displayed despite empty
bean tank
Bean monitoring system soiled
Clean bean tank (dry)
Download from Www.Somanuals.com. All Manuals Search And Download.
27
21. Legal information
22. Technical data
Voltage:
These operating instructions contain all the information required
for operating and maintaining the machine properly.
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine
safely as well as for operational safety and safety during mainte-
nance.
230 V AC
1350 W
10 A
Power:
Fuse:
Safety check:
These operating instructions cannot cover all conceivable appli-
cations.
Economy Mode – power consumption: 40 Wh
Economy Mode 1 power consumption: 20 Wh
Economy Mode 2 power consumption: 15 Wh
Additionally, we point out that the contents of these operating
instructions do not modify or form part of any previous or existing
agreement, consent or legal relationship. Any obligations to be
fulfilled by JURA Elektroapparate AG are stipulated in the corre-
sponding purchase contract which also contains the full and solely
applicable warranty terms. These contractual warranty terms are
neither extended nor limited by the specifications contained in
these operating instructions.
The operating instructions contain information that is protected by
Copyright. Photocopying or translations into other languages shall
not be permissible without JURA Elektroapparate AG’s written
approval.
Pump pressure:
static max. 15 bar
Water tank:
5.7 litres
Bean tank capacity:
Coffee grounds bin capacity:
Length of cable:
Weight:
280 g.
max. 40 portions
approx. 1.1 m
15.2 kg
Dimensions (WxHxD):
41 x 47 x 39 cm
This appliance complies with the following EC directives:
73/23/EEC of February 19th, 1973, “Low Voltage Directive” and
amending directive 93/336/EEC.
89/336/EEC of May 3rd,1989, “EMC Directive” and amending
directive 92/31/EEC.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
JURA Elektroapparate AG – Kaffeeweltstrasse 10 – CH-4626 Niederbuchsiten
Download from Www.Somanuals.com. All Manuals Search And Download.
|