The IMPRESSA C9 Manual
The ‘IMPRESSA Manual’ has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
5
Permanent settings in programming mode
35
Products........................................................................................................................................................35
Energy-saving mode ..................................................................................................................................37
Time ..............................................................................................................................................................38
Programmable switch-on time.................................................................................................................38
Automatic switch-off..................................................................................................................................39
Unit amount of water / Time format .......................................................................................................40
Language......................................................................................................................................................40
6
Maintenance
42
Maintenance tips.........................................................................................................................................42
Rinse machine..............................................................................................................................................42
Filter change.................................................................................................................................................43
Clean machine.............................................................................................................................................44
Descale machine .........................................................................................................................................46
Rinsing the Easy Cappuccino Frother......................................................................................................48
Cleaning the Easy Cappuccino Frother ...................................................................................................49
Disassembling and rinsing the Easy Cappuccino Frother....................................................................50
Rinsing the Professional Cappuccino Frother........................................................................................50
Cleaning the Professional Cappuccino Frother.......................................................................................51
Disassembling and rinsing the Professional Cappuccino Frother......................................................53
Cleaning the bean container.....................................................................................................................53
Descaling the water tank...........................................................................................................................54
7
8
9
Display messages
55
57
58
Troubleshooting
Transport and environmentally neutral disposal
Transport / Empty system .........................................................................................................................58
Disposal.........................................................................................................................................................58
10 Technical data
59
60
64
Index
JURA contact details / Legal information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
IMPORTANT SAFEGUARDS
These safeguards apply for machines with UL safety test (see rating
plate and chapter 10, ‘Technical data’).
Follow the basic safety
precautions
When using electrical appliances, basic safety precautions should
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
Z
Z
Z
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock and injury to persons, do
not immerse cord, plugs, or body of machine in water or other
liquid.
Z
Z
Close supervision is necessary when any appliance is used by
or near children.
Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Z
Z
Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
The use of any accessory attachment not recommended by
the appliance manufacturer may result in fire, electric shock,
or injury to persons.
Z
Z
Do not use outdoors.
Do not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
Z
Z
Do not place on or near a hot gas or electric burner, or in a
heated oven.
Always attach plug to appliance first, then plug cord into the
wall outlet. To disconnect, turn any control to ‘OFF’ then
remove plug from wall outlet.
Z
Z
Z
Do not use appliance for other than intented use.
Use extreme caution when dispensing hot steam.
For household use only.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Special cord set instructions
a. A short power supply cord is provided to reduce the risk
resulting from becoming entangled in or tripping over a long
cord.
Your IMPRESSA has a 3-pin grounded plug.
b. Longer extension cords are available and may be used if care
is exercised in their use.
c. If an extension cord is used,
1. the marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance,
and
2. if the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
3. the longer cord shall be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on
by children of tripped over.
Z
Z
Z
As a safety feature, this plug will fit in a polarized outlet only
one way.
If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not modify the plug in any way or attempt to defeat this
safety feature.
Warning
Caution
To reduce the risk of fire or electric shock, do not remove any service
covers. No user serviceable parts inside. Repair should be done by
authorized personnel only.
This appliance is for household use. Any servicing other than clean-
ing and user maintenance should be performed by an authorized
service representative:
Z
Z
Do not immerse base in water or try to disassemble.
To reduce the risk of fire or electric shock, do not remove the
base. No user serviceable parts inside. Repair should be done
by authorized service personnel only.
Z
Z
Check voltage to be sure that the voltage indicated on the
name plate complies with your voltage.
Never use warm or hot water to fill the water container! Use
cold water only.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Z
Z
Z
Keep your hands and the cord away from hot parts of the
appliance during operation.
Never clean with scouring powders or hard implements.
NEVER DO
Never fill instant coffee, chocolate mix etc. into the grinder or
ground coffee funnel (grinder by-pass). It will damage the
functioning of the brewing chamber.
(or you will void your
warranty protection):
Z
Z
Never fill sugar coated coffee beans into the bean hopper. In
case of doubt, call your dealer.
Never fill anything other than coffee beans into the bean con-
tainer (no chocolate, no rice, no nuts, no spices, nothing other
than roasted coffee beans).
Z
Never do anything with the machine which is not described in
the User‘s Manual. In case of doubt, call your dealer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control elements
Control elements
8
1
9
2
3
10
4
5
11
12
13
6
7
14
Figure: IMPRESSA C9 Piano Black
1
2
3
4
5
Cover of filler funnel for pre-ground coffee
Filler funnel for pre-ground coffee
Water tank cover
8
9
Fineness of grind switch
Bean container cover
10 Bean container
Water tank
with aroma preservation cover
Power switch and power cable
(side of machine)
11 Connector System©
for removable frothers
6
7
Coffee grounds container
Drip tray
12 Easy Cappuccino Frother
13 Height-adjustable coffee spout
14 Cup platform
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Control elements
1
2
3
4
Front left:
Front right:
1
Plain text display
On/off button
p
ü
Cappuccino button
Q
c
i
o
v
2
Milk foam button
Maintenance button
Espresso button
Coffee button
m
Hot water button
4
5
6
Easy Cappuccino Frother
Professional Cappuccino Frother
Hot water nozzle
Pre-ground coffee button
Rotary Switch cover
Rotary Switch
3
The Connector System© permits the use of different frothers. These are available from stockists.
4
5
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information
The machine has been designed and built for domestic use. It should
only be used to prepare coffee and to heat milk and water. Use for
any other purpose will be deemed improper. JURA Elektroapparate
AG cannot accept any responsibility for the consequences of
improper use.
Proper use
Before using the machine always carefully read and comply with all
these instructions. Keep this manual close to the IMPRESSA and, if
appropriate, pass it on to the next user.
Please read and note carefully the following important safety infor-
For your safety
mation.
By doing this, you can avoid the life-threatening danger of electric
shock:
Z
Never use a machine which has been damaged or with a
defective power cable.
Z
For information on what to do in case of damage, for example
if there is a smell of burning, unplug the machine immediately
from the mains supply and contact the JURA service centre.
If the power cable for this machine is damaged, it must be
repaired either directly by JURA or by a JURA approved service
centre.
Z
Z
Z
Z
Make sure that the IMPRESSA and the power cable are not
located close to hot surfaces.
Be careful to ensure that the power cable does not get caught
and does not rub against sharp edges.
Never open and repair the machine yourself. Do not modify
the machine in any way that is not described in the IMPRESSA
Manual. The machine contains live parts. If opened, there is a
danger of serious injury. Repairs may only be carried out by
JURA approved service centres, using original spare parts and
accessories.
There is a risk of scalds or burns on the spouts or on the nozzle:
Z
Z
Z
Place the machine out of the reach of children.
Do not touch any hot parts. Use the handles provided.
Be careful to ensure that the appropriate nozzle is installed
and clean. The nozzle or parts of the nozzle might come off if
the parts are not assembled correctly or a blockage occurs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
Z
Never allow the power cable to loosely hang down. The power
cable can be tripped over or damaged.
Z
Protect your IMPRESSA from environmental influences such
as rain, frost and direct sunlight.
Z
Z
Do not put the IMPRESSA, cable or connections in water.
Do not put the IMPRESSA or any individual parts in the dish-
washer.
Z
Turn your IMPRESSA off at the power switch before starting
any cleaning operation. Always wipe your IMPRESSA with a
damp cloth rather than a wet one, and protect it from pro-
longed water splash.
Z
Only connect the machine to a power supply in accordance
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is given in Chapter 10 ‘Technical Data’.
Z
Z
Use only original JURA care products. Use of accessories that
are not explicitly recommended by JURA could damage the
IMPRESSA.
Do not use any coffee beans treated with additives or caramel-
ised coffee beans.
Z
Z
Always fill the water tank with cold, fresh mains water.
If you will be absent for an extended period, turn the machine
off and unplug.
Risk to children and persons with limited capabilities in operating
machines:
Z
The machine is not designed to be operated by children and
persons with limited capabilities.
Z
The machine may only be used by persons who are able to
operate the machine safely.
Safe handling of the CLARIS filter cartridges:
Z
Z
Z
Z
Z
Filter cartridges should be kept out of the reach of children.
Store filter cartridges dry in the sealed package.
Protect filter cartridges from heat and direct sunlight.
Do NOT use damaged filter cartridges.
Do NOT open filter cartridges.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The IMPRESSA C9 Manual
The IMPRESSA C9 Manual
You are holding the manual for your IMPRESSA C9 in your hand. It
will help you to familiarize yourself with your IMPRESSA safely and
quickly and teach you the full range of facilities it offers.
Chapter 2, ‘Preparing and using your IMPRESSA for the first time’,
explains step-by-step how to set up and prepare the IMPRESSA.
Chapter 3, ‘Familiarising yourself with the control options’ is impor-
tant for you to read as you are familiarising yourself with your
IMPRESSA. It invites you to actively explore all the different coffee
experiences that it offers.
All the other chapters are intended to help you when you have a
specific query.
If you use the IMPRESSA C9, you will become a master at preparing
exciting coffee specialities, you will be a Barista!
You can download the short operating instructions for your machine
from the JURA website (www.jura.com).
Symbol description
Warnings
Always take note of any information marked with the CAUTION or WARNING symbol.
The signal word WARNING points out potential risk of serious injury, and the signal
CAUTION word CAUTION potential risk of slight injury.
The CAUTION symbol is used to draw attention to circumstances which could cause
CAUTION
the machine to become damaged.
Symbols used
Information and tips to make things easier for you as you use your IMPRESSA.
E
References to the online JURA website, where you can find interesting further infor-
@
Prompt to take action. This symbol means that you are being prompted to perform
T
some action.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1 IMPRESSA C9
1 IMPRESSA C9
The new entry level model in the One Touch Cappuccino league is
sure to please all cappucino fans with its simple ‘touch of a button’
function without having to move the cup. In elegant piano black and
with a new user interface, the high-quality IMPRESSA C9 is fully in
keeping with current trends and exudes an aura of superiority, dura-
bilityand competence. It impressivelydemonstratesthese attributes
with each coffee speciality that you enjoy.
Coffee that fulfils your
wildest dreams
Z
Z
Z
One Touch Cappuccino: Your IMPRESSA C9 makes a cup of
cappuccino at the touch of a button, without you having to
move the cup. Hot milk foam, flowing into the cup and slowly
starting to fill it. Steam which rises, awakening the anticipa-
tion of a delicious speciality. Aromatic coffee, blending with
the milk, pushing up the milk foam topping. These are the
protagonists in a sensuous drama – the drama of perfect cof-
fee preparation.
Simple operation: With the clearly arranged control elements
and the easy-to-understand text and graphic display, opera-
tion of the IMPRESSA C9 is also simple for beginners. You can
navigate effectively through the individual programme steps
by simply turning and pressing the Rotary Switch. The focus
is on your personal taste. Simply select the coffee strength,
amount of water and temperature according to your individ-
ual preferences.
Energy-saving mode (Energy Save Mode, E.S.M.©): The
IMPRESSA C9 actively assists you in saving energy. With the
energy-saving mode you can adjust the energy-saving poten-
tial to suit the way you like to enjoy your beverages. The
machine can be completely disconnected from the power
supply at the main switch – for instance if you are going to be
absent for some time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1 IMPRESSA C9
Z
Height-adjustable coffee spout: The height of the coffee
spout, which can be adjusted within a range of 65 to 111 mm,
can be adapted to all cup sizes on a continuous scale. This pre-
vents coffee splashing on the machine and is your guarantee
for a rich, thick crema.
Connector System©
The Connector System© permits the use of different cappuccino
frothers:
Z
Professional Cappuccino Frother
U Cappuccino, latte macchiato
U Hot milk and milk foam
Easy Cappuccino Frother
U Cappuccino
Z
U Milk foam
JURA on the Internet
Knowledge Builder
Visit us on the Internet.
@ At www.jura.com you will find interesting and up-to-date
information on your IMPRESSA and on every aspect of cof-
fee.
You can familiarise yourself with your IMPRESSA C9 in a fun way on
the PC.
interactive assistant, LEO, will support you and explain the
benefits of and how to use your IMPRESSA.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
2 Preparing and using for the first time
This chapter provides you with the information you need to use your
IMPRESSA without any problems. You will prepare your IMPRESSA
step-by-step for your first coffee experience.
Set up
Keep the packaging for your IMPRESSA. It should be used to protect
the machine during transportation.
When setting up your IMPRESSA, please note the following:
Z
Set the IMPRESSA down on a horizontal surface that is not
sensitive to water.
Z
Choose a spot for your IMPRESSA which is protected against
overheating.
Filling the water tank
CAUTION
To enjoy perfect coffee we recommend changing the water every
day.
Milk, mineral water or other liquids can damage the water tank or
the machine.
T
Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert.
Filling the bean con-
tainer
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
pre-ground or freeze-dried coffee will damage the grinder.
CAUTION
T
Only use untreated coffee beans to refill the bean container.
T Open the cover of the bean container and remove the aroma
preservation cover.
T Remove any dirt or foreign objects inside the bean con-
tainer.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
First-time use
If the machine is operated with a defective power cable, there is a
danger of electric shock.
Never use a machine which has a defective power cable.
WARNING
T
Precondition: The water tank and bean container are full.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the back
of the machine.
The indicator light lights up (standby).
Q
T Press the On/Off button to switch the IMPRESSA on.
The pre-set language appears on the display.
T Open the cover of the Rotary Switch.
The Rotary Switch lights up.
g T Turn the Rotary Switch until the desired language is dis-
played. For Example: LANGUAGE ENGLISH
k
T Press the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting.
PRESS RINSE, the maintenance button c lights up.
T Close the cover of the Rotary Switch.
T Place a receptacle under the frother.
c
T Press the maintenance button.
SYSTEM FILLING, the system fills up with water. A
small amount of water flows from the frother.
This operation stops automatically, the following appears on
the display: HEATING.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
T Press the maintenance button.
c
RINSING, the machine rinses. The operation stops auto-
matically.
READY, your IMPRESSA is ready to use.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
E
When a coffee speciality has been prepared for the first time,
it is possible that FILL BEANS is shown on the display as
the grinder has not yet been completely filled with coffee
beans. In this case prepare another coffee speciality.
Using and activating
filter
Your IMPRESSA no longer has to be descaled if you are using CLARIS
filter cartridges.
@ You can also try out the ‘Insert filter’ operation online. Visit the
E
Perform the ‘Insert filter’ operation without interruptions. This
will ensure that your IMPRESSA always produces at its best.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears on
the display.
g T Turn the Rotary Switch until FILTER - is displayed.
k
T Press the Rotary Switch to enter the programme item.
NO -
g T Turn the Rotary Switch until YES w is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
INSERT, the maintenance button c lights up.
T Close the cover of the Rotary Switch.
T Remove the CLARIS filter cartridge from the Welcome Pack.
T Remove the water tank and empty it.
T Lift the cartridge holder and insert the filter cartridge into
the water tank, applying slight pressure.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
T Place a receptacle (at least 500 ml) under the frother.
c
T Press the maintenance button.
FILTER RINSING. Water will flow out of the frother.
E
E
You can interrupt rinsing of the filter at any time by pressing
any button.
The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml.
HEATING appears on the display, then READY is dis-
played. The filter is now activated.
Determining water
hardness and adjusting
E
However, if you are using the CLARIS filter cartridge and have
activated it, you will not be able to adjust the water hard-
ness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. This can also be deactivated, which means that
the IMPRESSA will not let you know when it has to be descaled.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for one second) under flowing
water. Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Example: To change the water hardness from 16°dH to
25°dH, proceed as follows:
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
g T Turn the Rotary Switch until HARDNESS is displayed.
k
T Press the Rotary Switch to enter the programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY appears on the display.
T Close the cover of the Rotary Switch.
Adjusting the grinder
CAUTION
You can adjust the grinder continuously to suit the roast of your cof-
fee.
If you adjust the fineness of grind when the grinder is not operating,
the grinding wheel could be damaged.
T
Only adjust the fineness of grind when the grinder is run-
ning.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. A fine, thick crema is also formed.
Our recommendations:
Z
Select a fine setting for a light roast.
U If the fineness of grind setting is too fine, the coffee only
drips from the coffee spout.
Z
Select a coarse setting for a darker roast.
U If the fineness of grind is too coarse the coffee flows too
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
T Open the cover of the bean container.
T Remove the aroma preservation cover.
T Place a cup under the coffee spout.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
o
T Press the Coffee button.
The grinder starts and 1 COFFEE is displayed. After this,
the coffee strength is briefly displayed.
T Turn the fineness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
T Close the aroma preservation cover and the cover of the
bean container.
Switching on
Precondition: Your IMPRESSA is switched on at the power switch
and the indicator light is illuminated (standby).
Q
T Press the On/Off button to switch the IMPRESSA on.
HEATING is displayed.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
T Press the maintenance button.
c
RINSING, the machine rinses.
Preparation stops automatically. READY appears on the
display.
Switching off (standby)
When you switch your IMPRESSA off, the spouts with which a coffee
speciality or milk have been prepared are rinsed.
T Place a receptacle under the coffee spout and the frother.
Q
E
T Press the On/Off button.
When you prepare a milk product, but have not performed
cappuccino cleaning, C–CLEANINGappearsand the main-
tenance button c lights up. For ten seconds you can start the
’Clean cappuccino frother’ procedure by pressing the mainte-
nance button.
RINSING, the coffee spout is rinsed.
RINSE RIGHT, maintenance button c lights up.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparing and using your IMPRESSA for the first time
c
T Press the maintenance button.
RINSING appears on the display, and the right coffee
spout is rinsed.
CAPPUCCINO RINSING
Cappuccino rinsing starts, and then stops automatically.
The IMPRESSA is switched off (standby), and the indicator
light lights up.
E
When your IMPRESSA is switched off, a hissing noise may be
audible. This is normal and does not have any effect on the
machine.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
3 Familiarising yourself with the control options
With the IMPRESSA, you can prepare an excellent coffee or milk spe-
ciality at the touch of a button. You also have the option of adjusting
the coffee strength and temperature, as well as the amount of water
to your personal taste.
Thischapterwillallowyou to become familiarwith allcontroloptions
with the aid of examples. To familiarise yourself with your IMPRESSA,
we recommend that you make a point of actively trying the facilities
described in this chapter. You will find this is well worthwhile.
Learn how to perform the following:
Z
Z
Preparation at the touch of a button
One-off settings before and while your drink is being pre-
pared.
Z
Z
Adjusting the default amount of water to suit the cup size
Permanent settings in programming mode
E
You can stop the machine at any time while a coffee or milk
speciality or hot water is being prepared. To do this, press any
button.
@ If you prefer to familiarise yourself with your IMPRESSA in a
fun way on the computer, the interactive Knowledge Builder
tutorial programme can be found on the Internet at
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
Preparation at the
touch of a button
Prepare your favourite coffee speciality at the touch of a button.
All coffee specialities are prepared following this model at the touch
of a button.
Preparing a coffee speciality Example: This is how to prepare one espresso.
at the touch of a button
Precondition: READY is displayed.
T Place an espresso cup under the coffee spout.
i
T Press the Espresso button.
1 ESPRESSO and the coffee strength is then briefly dis-
played.
The pre-set amount of water flows into the cup. Preparation
stops automatically. READY appears on the display.
Preparing two coffee
specialities at the touch of
one button
Example: This is how to prepare two espressi.
Precondition: READY is displayed.
T Place two espresso cups under the coffee spout.
i
T Press the Espresso button twice (within two seconds).
2 ESPRESSI appears on the display, the pre-set amount
of water flows into the cups.
Preparation stops automatically. READY appears on the
display.
One-off settings before
and during preparation
The coffee strength can be changed before preparation or during
the grinding operation.
The following coffee strengths can be selected for 1 espresso, 1 cof-
fee and 1 cappuccino:
Z
Z
Z
Mild
Normal
Strong
E
The pre-set amount of water can be changed during the
brewing operation by turning the Rotary Switch.
One-off settings before and during coffee preparation always follow
this model. These settings are not saved.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
Changing the coffee
Example: Proceed as follows to to prepare a strong cup of coffee.
strength before preparation
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
T Place a cup under the coffee spout.
g T Turn the Rotary Switch until STRONG is displayed.
o
T Press the Coffee button for as long as STRONG is dis-
played.
1 COFFEE / STRONG.
The pre-set amount of water flows into the cup. Preparation
stops automatically. READY appears on the display.
T Close the cover of the Rotary Switch.
Changing the amount of
water during preparation
Example: Proceed as follows to prepare a 110 ML cup of coffee.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
T Place a cup under the coffee spout.
o
T Press the Coffee button.
The grinding operation starts. 1 COFFEE and the coffee
strength is then briefly displayed.
g T Turn the Rotary Switch during the brewing operation until
110 ML is displayed.
The set amount of water flows into the cup. Preparation
stops automatically. READY appears on the display.
T Close the cover of the Rotary Switch.
Adjusting the default
amount of water to
suit the cup size
It is easy to make permanent settings for the amount of water for all
coffee and milk specialities as well as hot water according to the cup
size. As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of water
will be dispensed.
The permanent settings for adapting the amount of water to to the
cup size for all coffee and milk specialities as well as hot water follow
this model.
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition: READY is displayed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
T Place an espresso cup under the coffee spout.
i
i
i
T Press and hold the Espresso button.
1 ESPRESSO appears on the display.
T Hold the Espresso button down until ENOUGH
COFFEE ? appears.
T Release the Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically. OK appears briefly on the
display. The set amount of water for an espresso will be per-
manently stored. READY appears on the display.
You can alter these settings at any time by repeating the
above procedure.
E
Permanent settings in
programming mode
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. You can navigate through the easy-tounderstand
programme steps and make permanent settings by simply turning
and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme item
Sub-item
C–CLEANING,
FILTER (only when the gramme.
Explanation
RINSE
T Select the desired maintenance pro-
filter is activated),
CLEAN,
If no action is taken, programming mode is
exited automatically after approx. five sec-
onds.
C–RINSE,
DE-SCALE (only when
the filter is not activated),
CLEAN
BUTTONS
FILTER -
SELECT BUTTON
T Select your settings for the coffee and
milk specialities and hot water.
YES w
NO -
T Indicate whether you operate your
IMPRESSA with or without a CLARIS filter
cartridge.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
Programme item
Sub-item
Explanation
HARDNESS (is only INACTIVE,
T Adjust the water hardness.
displayed when the
filter is not activated)
1°dH – 30°dH
ENERGY
SAVE -,
SAVE w
T Select an energy-saving mode.
TIME
--:--
--:--
T Set the time.
UNIT ON
OFF AFTER
T Adjust the switch-on time.
INACTIVE,
T Set the number of hours after which the
0.5 HRS – 15 HRS
IMPRESSA should switch off automatically.
INFO
T Keep track of all prepared coffee and
milk specialities and view the maintenance
status.
DISPLAY
ML/OZ,
24H/AM PM
T Select the unit of the amount of water
and the time format.
LANGUAGE
EXIT
T Select your language.
T Exit programming mode.
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from STRONG
to NORMAL proceed as follows:
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until BUTTONS is displayed.
k
T Press the Rotary Switch to enter the programme item.
SELECT BUTTON
E
E
Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
To enter a setting for the double product, press the corre-
sponding button twice within a period of two seconds.
i
T Press the Espresso button.
WATER
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
g T Turn the Rotary Switch until STRENGTH is displayed.
k
T Press the Rotary Switch to enter the programme item.
STRONG
g T Turn the Rotary Switch until NORMAL is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
STRENGTH
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Query information and
maintenance status
Under the programme item INFO, you can query the following
information:
Z
Z
Z
Number of the prepared coffee and milk specialities and hot
water
Maintenance statusand numberofmaintenance programmes
performed (cleaning, descaling, filter change)
Number of performed cappuccino cleaning operations
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Press the Rotary Switch until RINSE appears.
g T Turn the Rotary Switch until INFO is displayed.
k
k
T Press the Rotary Switch to enter the programme item.
BUTTONS
T Press the Rotary Switch to enter the programme item.
The total number of the prepared coffee specialities is dis-
played.
E
The respective number of prepared products is displayed by
pressing the individual buttons.
k
T Press the Rotary Switch to exit the programme item.
BUTTONS
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Familiarising yourself with the control options
g T Turn the Rotary Switch until CLEAN is displayed.
E
Turn the Rotary Switch to switch to the performed descaling,
filter change and cappuccino cleaning operations.
k
T Press the Rotary Switch to enter the programme item.
The number of performed cleaning operations appears on
the display.
E
The respective maintenance status can also be displayed in
addition to the number of performed maintenance pro-
grammes. The filled out fields show the maintenance status.
Once all fields are filled out, your IMPRESSA will request the
respective maintenance programme.
k
T Press the Rotary Switch to exit the programme item.
CLEAN
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit the programme item.
INFO
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
4 Preparation at the touch of a button
In this chapter you will find out how to prepare coffee and milk spe-
cialities and hot water without making further settings.
Chapter 3, ‘Familiarising yourself with the control options’, will teach
you how to adjust the settings to your personal preferences. Alter-
natively, you can use Chapter 5, ‘Permanent settings in program-
ming mode’.
E
E
You can interrupt the machine at any time while a coffee or
milk speciality or hot water is being prepared. To do this, press
any button.
During preparation, you can change the set amount by turn-
ing the Rotary Switch.
@ You can also try out the preparation of coffee specialities
Espresso
The classic coffee drink from Italy. There is a definite crema on the
surface of the espresso.
Example: This is how to prepare an espresso.
T Place an espresso cup under the coffee spout.
i
T Press the Espresso button.
1 ESPRESSO and the coffee strength is then briefly dis-
played.
The pre-set amount of water flows into the cup. Preparation
stops automatically. READY appears on the display.
To prepare two cups of espresso: Place two espresso cups under the
coffee spout and press the espresso button i twice (within two
seconds).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
Coffee
Example: This is how to prepare a coffee.
T Place a cup under the coffee spout.
o
T Press the Coffee button.
1 COFFEE is displayed. After this, the coffee strength is
briefly displayed.
The pre-set amount of water flows into the cup. Preparation
stops automatically. READY appears on the display.
To prepare two cups of coffee: Place two cups under the coffee spout
and press the coffee button o twice (within two seconds).
Cappuccino
Your IMPRESSA prepares a cappuccino at the touch of a button. It is
not necessary to move the cup.
E
The IMPRESSA C9 is equipped with a heating element for pre-
paring coffee and steam. After preparing several cappuccinos
within a short period of time, it is possible that the coffee only
flows irregularly from the right-hand coffee spout. In this case
allow your IMPRESSA a short break before making the next
cappuccino.
Cappuccino with the Easy
Cappuccino Frother
T Take the protective cover off the Easy Cappuccino Frother.
T Attach the milk pipe to the frother.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a cup under the frother.
p
T Press the Cappuccino button.
CAPPUCCINO, the coffee strength is then briefly dis-
played.
CAPPUCCINO, the milk foam is prepared.
The operation stops automatically. Coffee preparation will
now begin.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
Preparation stops automatically after reaching the pre-set
amount of water. READY appears on the display.
To ensure that the Easy Cappuccino Frother works perfectly, it
should be rinsed and cleaned regularly (refer to Chapter 6 ‘Mainte-
nance – Easy Cappuccino Frother’).
Cappuccino with the
Professional Cappuccino
Frother
T Take the protective cover off the Professional Cappuccino
Frother.
T Attach the milk pipe to the frother.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a cup under the frother.
T Turn the selection lever of the frother to the milk foam posi-
tion p.
p
T Press the Cappuccino button.
CAPPUCCINO, the coffee strength is then briefly dis-
played.
CAPPUCCINO, the milk foam is prepared.
The operation stops automatically. Coffee preparation will
now begin.
Preparation stops automatically after reaching the pre-set
amount of water. READY appears on the display.
To ensure that the Professional Cappuccino Frother works perfectly,
it should be rinsed and cleaned regularly (refer to Chapter 6 ‘Main-
tenance – Professional Cappuccino Frother’).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
Pre-ground coffee
You can choose a second coffee blend with the filler funnel for pre-
ground coffee.
E
E
Never add more than two level measuring spoons of pre-
ground coffee.
Use pre-ground coffee which is not ground too finely. Very
fine coffee can block up the system so that the coffee only
comes out in drips.
E
E
If you did not fill the machine with a sufficient amount of pre-
ground coffee, NOT ENOUGH PRE-GROUND is displayed
and the IMPRESSA stops operation.
The desired coffee speciality must be prepared within approx.
one minute after filling with the pre-ground coffee. Other-
wise, the IMPRESSA stops the operation and is ready to use
again.
All coffee specialities with pre-ground coffee are prepared following
this model.
Example: This is how to prepare a cup of coffee using pre-ground
coffee.
T Place a cup under the coffee spout.
v
T Press the Pre-ground coffee button.
FILL PRE-GROUND, then READY are displayed.
T Open the cover of the filler funnel for pre-ground coffee.
T Place one level measuring spoon of pre-ground coffee into
the filler funnel.
T Close the cover of the filler funnel for pre-ground coffee.
T Press the Coffee button.
o
1 COFFEE is displayed. After this, PRE-GROUND is
briefly displayed.
Preparation stops automatically after reaching the pre-set
amount of water.
READY
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
Foaming milk with the
Easy Cappuccino
Frother
T Take the protective cover off the Easy Cappuccino Frother.
T Attach the milk pipe to the frother.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a cup under the frother.
T Press the milk foam button.
HEATING
ü
ü
READY appears as soon as the IMPRESSA has heated up.
T Press the milk foam button once more.
MILK, the milk foam is being prepared.
Preparation stops automatically.
READY
E
You can prepare more milk foam within about 40 seconds.
To ensure that the Easy Cappuccino Frother works perfectly, it
should be rinsed and cleaned regularly (refer to Chapter 6 ‘Mainte-
nance – Easy Cappuccino Frother’).
Foaming and heating
milk with the
Professional
Cappuccino Frother
T Take the protective cover off the Professional Cappuccino
Frother.
T Attach the milk pipe to the frother.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation at the touch of a button
T Place a cup under the frother.
T Turn the selection lever of the frother to the milk foam posi-
tion p.
E
ü
ü
If you want to heat the milk, set the selection lever of the
frother to the milk position t.
T Press the milk foam button.
HEATING
READY appears as soon as the IMPRESSA has heated up.
T Press the milk foam button once more.
MILK, the milk foam is being prepared.
Preparation stops automatically.
READY
E
You can prepare more milk foam or hot milk within about
40 seconds.
To ensure that the Professional Cappuccino Frother works perfectly,
it should be rinsed and cleaned regularly (refer to Chapter 6 ‘Main-
tenance – Professional Cappuccino Frother’).
Hot water
Precondition: READY is displayed.
E
Attach the hot water nozzle to the Connector System© for
heating water.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with skin.
CAUTION
T Place a cup under the nozzle.
m
T Press the hot water button.
WATER, hot water flows into the cup.
Preparation stops automatically after reaching the pre-set
amount of water.
READY
34
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
5 Permanent settings in programming mode
Products
With the BUTTONS programme item you can enter individual set-
tings for all coffee and milk specialities as well as hot water.
The following permanent settings can be entered for coffee and
milk specialities and hot water:
Product
Amount
Coffee strength
Temp.
1 espresso
25 ML – 240 ML
MILD, NORMAL,
STRONG
NORMAL, HIGH
2 espressi
1 coffees
2 coffees
25 ML – 240 ML
–
NORMAL, HIGH
NORMAL, HIGH
NORMAL, HIGH
NORMAL, HIGH
(per cup)
25 ML – 240 ML
MILD, NORMAL,
STRONG
25 ML – 240 ML
–
(per cup)
Cappuccino Amount of milk:
3 SEC – 120 SEC
Amount of water:
MILD, NORMAL,
STRONG
25 ML – 240 ML
Milk foam
Hot water
3 SEC – 120 SEC
25 ML – 450 ML
–
–
–
–
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk of one
cappuccino from 14 SEC to 20 SEC, the amount of water from
60 ML to 50 ML and the coffee strength from NORMAL to
STRONG.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until BUTTONS is displayed.
k
T Press the Rotary Switch to enter the programme item.
SELECT BUTTON
35
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
E
Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
To change a setting for a double product, press the corre-
sponding button twice within a period of two seconds.
E
p
k
T Press the Cappuccino button.
MILK
T Press the Rotary Switch to enter the programme item.
14 SEC
g T Turn the Rotary Switch until 20 SEC is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
MILK
g T Turn the Rotary Switch until WATER is displayed.
k
T Press the Rotary Switch to enter the programme item.
60 ML
f T Turn the Rotary Switch until 50 ML is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
WATER
g T Turn the Rotary Switch until STRENGTH is displayed.
k
T Press the Rotary Switch to enter the programme item.
NORMAL
g T Turn the Rotary Switch until STRONG is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
STRENGTH
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
Resetting the products to
works settings
You can reset the values of all products individually to the works set-
ting.
Example: Proceed as follows to reset the values of 1 espresso and
2 espressi to the works setting.
Precondition: The IMPRESSA must be switched off (standby).
T Press the Rotary Switch and the Espresso button for two sec-
onds at the same time until OK appears.
The values of 1 espresso and 2 espressi are then reset to the
works setting. The IMPRESSA must be switched off
(standby).
An energy-saving mode (Energy Save Mode, E.S.M.©) permanent
Energy-saving mode
setting can be made with the ENERGY programme item:
Z
SAVE -
U All coffee products as well as hot water can be prepared
without having to wait.
U The machine heats up before preparing cappuccino or
milk.
Z
SAVE w
U Approx. 5 minutes after the last preparation the IMPRESSA
switches to the energy-saving temperature and is not ready
for use.
U Beforecoffee,hot waterormilkcanbeprepared,themachine
heats up.
Example: Proceed as follows to change the energy-saving mode
from SAVE - to SAVE w.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until ENERGY - is displayed.
k
T Press the Rotary Switch to enter the programme item.
SAVE -
g T Turn the Rotary Switch until SAVE w is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
ENERGY w
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Time
If the machine is disconnected from the mains, the time has to be
reset.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until TIME is displayed.
k
T Press the Rotary Switch to enter the programme item.
--:--
g T Turn the Rotary Switch to set the hour.
T Press the Rotary Switch to confirm the hour setting.
g T Turn the Rotary Switch to set the minutes.
k
k
T Press the Rotary Switch to confirm the minute setting.
OK appears briefly on the display to confirm the setting.
TIME
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Programmable
switch-on time
When a switch-on time has been set, the IMPRESSA switches on
every day at the set time and heats up.
E
E
The programmable switch-on time can only be set when the
time has been set.
The programmable switch-on of your IMPRESSA only works
when the machine is switched on at the power switch
(standby).
Example: To set the programmable switch-on time to 07:30, pro-
ceed as follows.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
g T Turn the Rotary Switch until UNIT ON appears.
k
T Press the Rotary Switch to enter the programme item.
--:--
g T Turn the Rotary Switch until 07:00 is displayed.
T Press the Rotary Switch to confirm the hour setting.
g T Turn the Rotary Switch until 07:30 is displayed.
k
k
T Press the Rotary Switch to confirm the minute setting.
OK appears briefly on the display to confirm the setting.
UNIT ON
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit the programme item.
READY
T Close the cover of the Rotary Switch.
Automatic switch-off
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after a pre-set period has
elapsed following the last use of the machine.
E
The programmable switch-off time can be adjusted between
0.5 and 15 hours or deactivated.
Example: Proceed as follows to change the automatic switch-off
time from 1 HRS to 2 HRS.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until OFF AFTER is displayed.
k
T Press the Rotary Switch to enter the programme item.
1 HRS
f T Turn the Rotary Switch until 2 HRS is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
OFF AFTER
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
Unit amount of water /
Time format
You can change the unit of the amount of water from ‘ml’ to ‘oz’ and
the time format to ‘24 HRS’ or ‘AM/PM’ .
Example: To change the unit for the amount of water from ML to
OZ, proceed as follows.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until DISPLAY is displayed.
k
E
T Press the Rotary Switch to enter the programme item.
ML/OZ
To change the time format, turn the Rotary Switch until
24H/AM PM is displayed.
k
T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
ML/OZ
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit the programme item.
DISPLAY
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Language
The language of your IMPRESSA is set with this programme item.
Example: To change the language from ENGLISH to DEUTSCH,
proceed as follows.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until LANGUAGE is displayed.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Permanent settings in programming mode
k
T Press the Rotary Switch to enter the programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is displayed.
k
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
SPRACHE
g T Turn the Rotary Switch until EXIT is displayed.
k
T Press the Rotary Switch to exit programming mode.
BEREIT
T Close the cover of the Rotary Switch.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
6 Maintenance
Your IMPRESSA has the following integrated maintenance pro-
grammes:
Z
Z
Z
Z
Z
Z
Rinse machine
Filter change
Clean machine
Descale machine
Rinse frother
Clean frother
E
Clean or descale the machine or change the filter whenever
the appropriate indicator lights up.
Maintenance tips
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
You should proceed as follows:
Z
Empty the coffee grounds container and the drip tray. Rinse
them with warm water.
Z
Z
Rinse the water tank with clean water.
Dismantle and rinse the frother (See Chapter 6 ‘Mainte-
nance – Rinsing the frother’).
Z
Wipe the surface of the machine with a damp cloth.
Rinse machine
When the IMPRESSA is switched on, a prompt to perform a rinse
operation automatically appears after heating. When the IMPRESSA
is switched off, each spout which was used for preparation is
rinsed.
You can initiate the rinse operation manually at any time.
Precondition: READY is displayed.
T Place a receptacle under the coffee spout.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
g T Turn the Rotary Switch until RINSE is displayed.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
k
T Press the Rotary Switch to initiate the rinse operation.
RINSING
Rinsing stops automatically and your IMPRESSA is then
ready for use.
T Close the cover of the Rotary Switch.
Filter change
E
E
After 50 litres of water have flowed through, or after two
months, the filter will cease to work. Your IMPRESSA will auto-
matically prompt you to change the filter.
If the CLARIS filter cartridge is not activated, you will not be
prompted to change the filter.
@ You can also try out ‘changing the filter’ online. Visit the
Change following a prompt
To change the CLARIS filter cartridge when prompted to do so by
your IMPRESSA, proceed as follows:
Precondition: READY / FILTER is displayed and the mainte-
nance button c lights up.
c
T Press the maintenance button.
CHANGE
T Remove the water tank and empty it.
T Open up the cartridge holder and remove the old CLARIS fil-
ter cartridge.
T Insert a new CLARIS filter cartridge into the water tank,
pressing it slightly.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother.
E
If you are using the Professional Cappuccino Frother, set the
selection lever of the frother to the steam position n.
c
T Press the maintenance button.
FILTER RINSING – Water will flow out of the frother.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
E
E
You can interrupt filter rinsing at any time. To do this, press
any button.
The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml. The
IMPRESSA heats up and is once again ready to use.
Manual filter change
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and READY is displayed.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C CLEANING
g T Turn the Rotary Switch until FILTER is displayed.
k
T Press the Rotary Switch.
CHANGE
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi-
cated by a T), as is described under ‘Change following a
prompt’.
Clean machine
CAUTION
After 200 coffee preparations or 80 switch-on rinses, the IMPRESSA
will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
T
Use only original JURA care products.
E
E
The cleaning programme only lasts about 20 minutes.
Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E
JURA cleaning tablets are available from stockists.
@ You can also try out the ‘clean machine’ operation online. Visit
44
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Cleaning following a
prompt
Precondition: READY / CLEAN is displayed and the maintenance
button c lights up.
c
T Press the maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout and the frother.
T Press the maintenance button.
c
CLEANING, water flows from both coffee spouts.
The process is interrupted, ADD TABLET.
T Open the cover of the filler funnel for pre-ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
c
T Press the maintenance button.
CLEANING, water flows from both coffee spouts several
times.
The process is interrupted – EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The cleaning operation is now complete. The IMPRESSA is
ready for use again.
Manual cleaning
You can initiate the ‘Cleaning the machine’ operation manually.
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
g T Turn the Rotary Switch until CLEAN is displayed.
k
T Press the Rotary Switch.
EMPTY TRAY
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi-
cated by a T), as is described under ‘Cleaning following a
prompt’.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Descale machine
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
CAUTION
T
T
Avoid contact with the skin or eyes.
Rinse the descaling agent off with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.
CAUTION
CAUTION
CAUTION
T
Use only original JURA care products.
If the descaling operation is interrupted, there may be damage to
the machine.
T
Allow the descaling program to run to the end.
If the descaling agent comes into contact with sensitive surfaces,
damage cannot be ruled out.
T
Clean up any splashes immediately.
E
E
E
The descaling programme lasts approx. 45 minutes.
JURA descaling tablets are available from stockists.
If you use a CLARIS filter cartridge and this is activated, you
will not be prompted to change the filter.
@ You can also try out the ‘Descaling the machine’ operation
Descaling following a
prompt
Precondition: READY / DE-SCALE is displayed and the mainte-
nance button c lights up.
c
T Press the maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
T Remove the water tank and empty it.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 500 ml of water. This
may take several minutes.
T Pour the solution into the empty water tank and insert it in
the machine.
AGENT IN TANK, the maintenance button c lights up.
T Remove the frother.
T Place a receptacle (at least 500 ml) under the Connector Sys-
tem©.
c
T Press the maintenance button.
DE-SCALING
This causes water to flow out of the Connector System© sev-
eral times. The maintenance button blinks during the des-
caling operation.
The operation stops automatically, EMPTY TRAY.
T Empty the receptacle under the Connector System©.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold mains water and rein-
sert.
PRESS RINSE, the maintenance button c lights up.
T Replace the frother.
T Place a receptacle under the frother.
T Press the maintenance button.
c
DE-SCALING, water flows out of the frother.
The operation stops automatically, EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
E
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Manual descaling
You can initiate the ‘Descaling the machine’ operation manually.
Precondition: READY is displayed and the filter is not activated.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
g T Turn the Rotary Switch until DE-SCALE is displayed.
k
T Press the Rotary Switch.
EMPTY TRAY
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi-
cated by a T), as is described under ‘Descaling following a
prompt’.
Rinsing the Easy
Cappuccino Frother
To ensure that the Easy Cappuccino Frother works perfectly, you
should rinse it with water whenever you have prepared some milk.
Rinsing the Easy Cappuccino Your IMPRESSA will prompt you to rinse the Easy Cappuccino
Frother after a prompt
Frother 10 minutes after you have prepared milk.
Precondition: CAPPUCCINO RINSEis displayed and the main-
tenance button c lights up.
T Place a receptacle under the Easy Cappuccino Frother.
c
T Press the maintenance button.
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically. READY appears on the
display.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Rinsing the Easy Cappuccino You can initiate the ‘Rinsing the frother’ operation manually.
Frother – starting manually
Precondition: READY is displayed.
T Place a receptacle under the Easy Cappuccino Frother.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C CLEANING
T Turn the Rotary Switch until C–CLEANING is displayed.
T Press the Rotary Switch.
k
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically. READY appears on the
display.
T Close the cover of the Rotary Switch.
Cleaning the Easy
To ensure that the Easy Cappuccino Frother works perfectly, you
Cappuccino Frother
should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
CAUTION
T
Use only original JURA care products.
E
E
The JURA Cappuccino Cleaner is available from stockists.
The IMPRESSA will not prompt you to clean the frother.
@ You can also try out the ‘Cleaning the cappuccino frother’
operation online. Visit the Knowledge Builder at
Precondition: READY is displayed.
T Remove the milk pipe from the milk carton/bottle or the
milk container.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
k
T Press the Rotary Switch.
CAPPUCCINO CLEANER
49
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
T Pour 250 ml of fresh water into a container and add one cap-
ful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Place another receptacle under the frother.
T Press the maintenance button.
c
CLEANING, the frother and pipe are cleaned. The opera-
tion stops automatically.
WATER FOR CAPPUCCINO
T Rinse the receptacle thoroughly, fill it with approx. 250 ml
of fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the frother
once more.
c
T Press the maintenance button.
CLEANING, the frother and pipe are rinsed with fresh
water. The operation stops automatically.
READY appears on the display.
T Close the cover of the Rotary Switch.
Disassembling and
rinsing the Easy
Cappuccino Frother
T Carefully remove the frother from the Connector System©
by twisting slightly.
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Re-assemble the frother.
E
Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
T Firmly attach the frother to the Connector System©.
Rinsing
the Professional
Cappuccino Frother
To ensure that the Professional Cappuccino Frother works perfectly,
you should rinse it with water whenever you have prepared some
milk.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Rinsing the Professional
Cappuccino Frother after a
prompt
Your IMPRESSA will prompt you to rinse the Professional Cappuc-
cino Frother 10 minutes after you have prepared milk.
Precondition: CAPPUCCINO RINSEis displayed and the main-
tenance button c lights up.
T Place a receptacle under the Professional Cappuccino
Frother.
c
T Press the maintenance button.
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically. READY appears on the
display.
Rinsing the Professional
Cappuccino Frother –
starting manually
You can initiate the ‘Rinsing the frother’ operation manually.
Precondition: READY is displayed.
T Place a receptacle under the Professional Cappuccino
Frother.
T Open the cover of the Rotary Switch.
c
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
T Turn the Rotary Switch until C–CLEANING is displayed.
T Press the Rotary Switch.
k
CAPPUCCINO RINSING, the frother is rinsed with
fresh water.
Preparation stops automatically. READY appears on the
display.
T Close the cover of the Rotary Switch.
Cleaning
To ensure that the Professional Cappuccino Frother works perfectly,
the Professional
Cappuccino Frother
you should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
CAUTION
T
Use only original JURA care products.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
E
E
The JURA Cappuccino Cleaner is available from stockists.
The IMPRESSA will not prompt you to clean the frother.
@ You can also try out the ‘Cleaning the cappuccino frother’
operation online. Visit the Knowledge Builder at
Precondition: READY is displayed.
T Open the cover of the Rotary Switch.
k
k
T Keep the Rotary Switch pressed until RINSE appears.
T Press the Rotary Switch to enter the programme item.
C–CLEANING
k
T Press the Rotary Switch.
CAPPUCCINO CLEANER
T Remove the milk pipe from the milk carton/bottle or the
milk container.
T Pour 250 ml of fresh water into a container and add one cap-
ful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the selection lever of the frother to the milk foam posi-
tion p or milk t.
T Place another receptacle under the frother.
T Press the maintenance button.
c
CLEANING, the frother and pipe are cleaned. The opera-
tion stops automatically.
WATER FOR CAPPUCCINO
T Rinse the receptacle thoroughly, fill it with approx. 250 ml
of fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the frother
once more.
c
T Press the maintenance button.
CLEANING, the frother and pipe are rinsed with fresh
water.
Preparation stops automatically. READY appears on the
display.
T Close the cover of the Rotary Switch.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Disassembling and
rinsing the
Professional
T Carefully remove the frother from the Connector System©
by twisting slightly.
Cappuccino Frother
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Re-assemble the frother.
E
Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
T Firmly attach the frother to the Connector System©.
Cleaning
the bean container
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These residues may negatively affect
the coffee results. For this reason clean the bean container from
time to time.
Danger of injury to the fingers when the grinder is running.
T
Switch the machine off with the on/off button Q before per-
forming any work on the grinder.
WARNING
T
Switch the machine off at the power switch 3.
Precondition: READY / FILL BEANS is displayed.
T Switch your machine off with the On/Off button.
Q
3 T Switch your machine off at the power switch.
T Open the cover of the bean container and remove the aroma
preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Maintenance
Descaling
the water tank
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS filter cartridge, remove this.
T Descale the tank with a mild, commercially available descal-
ing agent in accordance with the instructions of the manu-
facturer.
T Rinse out the water tank thoroughly.
T If you use a CLARIS filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Display messages
7 Display messages
Message
Cause/Result
Action
T Fill the water tank (See
FILL WATER TANK
The water tank is empty.
You cannot prepare any coffee Chapter 2, ‘Preparing and
or milk specialities or hot using for the first time – Filling
water.
the water tank’)
EMPTY GROUNDS
TRAY MISSING
The coffee grounds container is T Empty the coffee grounds
full. You cannot prepare any container and the drip tray.
coffee specialities, but you can
prepare hot water or milk.
The drip tray is not inserted cor- T Insert the drip tray.
rectly or is not inserted at all.
You cannot prepare any coffee
specialities or hot water or milk
products.
PRESS RINSE
FILL BEANS
The IMPRESSA is prompting T Press the maintenance
you to rinse it.
button to start rinsing.
The bean container is empty.
T Fill the bean container (See
You cannot prepare any coffee Chapter 2, ‘Preparing and
specialities, but you can pre- using for the first time – Filling
pare hot water or milk.
the bean container’)
CAPPUCCINO RINSE
READY / CLEAN
The IMPRESSA is prompting T Press the maintenance
you to start cappuccino rin- button to start cappuccino
sing.
rinsing.
After 200 preparations or 80 T Clean the machine (See
switch-on rinses, the IMPRESSA Chapter 6, ‘Maintenance –
will prompt you to clean it.
Cleaning the machine’)
READY / DE-SCALE
READY / FILTER
The IMPRESSA is prompting T Descale the machine (See
you to descale it.
Chapter 6, ‘Maintenance –
Descaling the machine’)
After 2 months or when 50 lit- T Replace the CLARIS filter
res of water have flowed cartridge (See Chapter 6
through the filter, its capacity is ‘Maintenance – Changing the
reached.
filter’).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Display messages
Message
Cause/Result
Action
NOT ENOUGH
PRE-GROUND
There is too little pre-ground T The next time you make
coffee in the filler funnel. The coffee use more pre-ground
IMPRESSA stops the operation. coffee (refer to Chapter 4,
‘Preparation at the touch of a
button – Pre-ground coffee’).
TOO HOT
The system is too hot to start a T Prepare a coffee speciality or
maintenance programme.
hot water.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
8 Troubleshooting
Problem
Cause/Result
Action
Grinder is making a very
loud noise.
There are some foreign
bodies in the grinder.
T Contact customer support in your
country (see ‘JURA contact details /
Legal information’).
Insufficient foam is
The cappuccino frother is
dirty.
T Rinse and clean the cappuccino
frother (see Chapter 6, ‘Mainte-
nance – Cappuccino frother’).
produced when the milk is
foamed or milk sprays from
the cappuccino frother.
Coffee only comes out in
drips when it is being
prepared.
Coffee or pre-ground coffee T Put the grinder on a coarser
has been ground too finely setting or use coarser pre-ground
and is blocking the system. coffee (refer to Chapter 2, ‘Preparing
and using for the first time –
Adjusting grinder’).
Water hardness cannot be
adjusted.
The CLARIS filter cartridge
is activated.
T Deactivate the CLARIS filter
cartridge.
FILL BEANS is displayed The grinder is not yet
T Prepare a coffee speciality.
although the bean container completely filled with
has been filled.
beans.
FILL WATER TANK is
displayed although the
water tank is full.
The water tank float is
trapped.
T Descale the water tank (see
Chapter 6, ‘Maintenance – Descal-
ing the water tank’).
ERROR 2 is displayed.
If the device was exposed to T Warm up the device at room
the cold for a long period of temperature.
time, it is disabled from
heating up due to safety
reasons.
Other ERROR messages
–
T Turn the IMPRESSA off at the
power switch. Contact customer
support in your country (see ‘JURA
contact details / Legal information’).
are displayed.
E
If you have not been able to solve the problem, contact cus-
tomer support in your country (see ‘JURA contact details /
Legal information’).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Transport and environmentally neutral disposal
9 Transport and environmentally neutral disposal
Transport / Empty
system
Keep the packaging for your IMPRESSA. It should be used to protect
the machine during transportation.
In order to protect the IMPRESSA from frost during transportation,
the system must be emptied.
Precondition: READY is displayed.
T Carefully pull the frother off the Connector System©.
T Place a container under the Connector System©.
ü
ü
T Press the milk foam button.
HEATING
READY appears as soon as the IMPRESSA has heated up.
T Press the milk foam button once more.
MILK, steam is discharged from the Connector System©.
g T Turn the Rotary Switch until 40 SEC is displayed.
T Remove the water tank and empty it.
Steam is discharged until FILL WATER TANK appears.
Q
T Press the On/Off button to switch the machine off.
3 T Turn your IMPRESSA off at the power switch.
E
The next time you use the machine the system must be
refilled (see Chapter 2, ‘Preparing and using for the first
time – First-time use’).
Disposal
Please dispose of old machines in an environmentally neutral way.
Old machines contain valuable materials capable of being recycled
which should be salvaged for recycling. Please therefore dispose of
old machines via suitable collection systems.
H
58
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Technical data
10 Technical data
Voltage
A S
F
230 V AC, 50 Hz
120 V AC, 60 Hz
D
220 – 240 V AC, 50 Hz
220 V AC, 50 Hz
G
Power
1450 W
S F D G
Safety test
Power consumption
in standby mode
3,7 Wh
Power consumption
18 Wh
ENERGY SAVE -
Power consumption
11 Wh
ENERGY SAVE w.
Pump pressure
Static max. 15 bar
Holding capacity of water tank 1,9 l
Holding capacity
of bean container
200 g
Holding capacity of coffee
grounds container
Approx. 16 servings
Cable length
Approx. 1,1 m
9,6 kg
Weight
Dimensions (W x H x D)
28 x 34,5 x 43,4 cm
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Coffee strength
Index
A
Changing the coffee strength before prepa-
ration 24
Connector System© 8, 14
Contact details 64
Control options 22
Cover
Adresses 64
Amount
Adjusting the default amount of water to
suit the cup size 24
Changing the amount of water during
preparation 24
Bean container 8
Filler funnel for pre-ground coffee 8
Water tank 8
Amount of coffee
Customer support 64
Adjusting the default amount of water to
suit the cup size 24
Changing the amount of water during
preparation 24
D
E
F
Descaling
Machine 46
Water tank 54
Determining water hardness and adjusting 18
Display
Amount of water
Adjusting the default amount of water to
suit the cup size 24
Changing during preparation 24
Aroma preservation cover 8
Automatic switch-off 39
Messages 55
Plain text 9
Display messages 55
Disposal 58
Drip tray 8
B
C
Bean container 8
Aroma preservation cover 8
Cleaning 53
Cover 8
Filling 15
Bus bar
Easy Cappuccino Frother
Cleaning 49
Disassembling and rinsing 50
Rinsing 48
Emptying the system 58
Energy-saving mode 13, 37
Environmentally neutral disposal 58
Errors
Technical data 59
Cappuccino 30
With the Easy Cappuccino Frother 30
With the Professional Cappuccino Frother 31
Cappuccino Frother
Easy Cappuccino Frother 9
Professional Cappuccino Frother 9
CLARIS filter cartridge
Changing 43
Troubleshooting 57
Espresso 29
Filler funnel for pre-ground coffee 8
Filling
Bean container 15
Water tank 15
Filter
Changing 43
Using and activating filter 17
Fineness of grind
Adjusting the grinder 19
Fineness of grind switch 8
Fineness of grind switch 8
First-time use 16
Using and activating filter 17
Cleaning
Bean container 53
Easy Cappuccino Frother 49
Machine 44
Professional Cappuccino Frother 51
Coffee 30
Coffee grounds container 8
Coffee spout, height-adjustable 8
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Frother
Easy Cappuccino Frother 9, 14
Milk foam
With the Easy Cappuccino Frother 33
Professional Cappuccino Frother 9, 14
With the Professional Cappuccino Frother
33
H
O
P
Hardness of water 18
Height-adjustable coffee spout 8
Hotline 64
One-off settings before and during prepara-
tion 23
Hot milk
Foaming and heating milk with the Profes-
sional Cappuccino Frother 33
Hot water 34
Permanent settings in programming mode
35
Plain text display 9
Power switch 8
Hot water nozzle 9
I
Pre-ground coffee 32
Filler funnel 8
Inserting
water tank 15
Instant coffee
Pre-ground coffee 32
Internet 14
Preparation
At the touch of a button 29
Cappuccino 30
Coffee 30
Espresso 29
J
Hot water 34
Pre-ground coffee 32
Problems
Troubleshooting 57
Professional Cappuccino Frother 14
Cleaning 51
JURA contact details 64
Knowledge Builder 14
K
L
Language 40
Legal information 64
Disassembling and rinsing 53
Rinsing 50
M
Programmable switch-on time 38
Programming mode 35
Automatic switch-off 39
Energy-saving mode 37
Language 40
Machine
Cleaning 44
Descaling 46
Rinsing 42
Setting up 15
Products 35
Switching off (standby) 20
Switching on 20
Programmable switch-on time 38
Time 38
Maintenance
Unit amount of water/Time format 40
Prompt to take action
Symbols used 12
Maintenance button 9
Maintenance tips 42
Maintenance status, Query 27
Malfunction
Troubleshooting 57
Milk
Q
R
Query information and maintenance status
27
Query maintenance status 27
Foaming and heating with the Professional
Cappuccino Frother 33
Foaming with the Easy Cappuccino Frother
33
Reinsert
Water tank 15
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Rinse
Maintenance button 9
Rinsing
Easy Cappuccino Frother 48
Machine 42
Professional Cappuccino Frother 50
Rotary Switch 9
S
Safety information 10
Settings
Adjusting the default amount of water to
suit the cup size 24
One-off settings before and during prepara-
tion 23
Permanent settings in programming mode
35
Set up 15
Standby
Switching off 20
Switching off (standby) 20
Switching on 20
T
Technical data 59
Time 38
Time format 40
Transport 58
Troubleshooting 57
U
V
Use, First-time 16
Voltage 59
W
Water hardness 18
Water tank 8
Descaling 54
Filling 15
Works settings 37
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Art. 67606/C9/en/201003
JURA contact details / Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Phone: +41 62 38 98 233
@ Contact information is available on the company website at
The machine complies with the following EU directives:
Directives
Z
Z
2006/95/EC – Low Voltage Directive
2004/108/EC – Electromagnetic Compatibility
We reserve the right to make technical changes.
Technical changes
The illustrations used in the IMPRESSA C9 Manual show the
IMPRESSA C9 Piano Black. Your IMPRESSA could incorporate minor
changes.
Your opinion is important to us!
Feedback
Copyright
The Instructions for Use contain information which is protected by
copyright. It is not permitted to photocopy or translate these
Instructions for Use into another language without the express
written consent of JURA Elektroapparate AG.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
|