Johnson Controls Air Conditioner TCGD30 User Manual
415571-UTG-C-0309  
DESCRIPTION  
TECHNICAL  
GUIDE  
The 13 SEER Series condensing unit is the outdoor part of a  
versatile system of air conditioning. It is designed to be custom-  
matched with one of UPG’s complete line of evaporator sec-  
tions, with each serving a specific function. Matching Air Han-  
dlers are available for upflow, downflow, or horizontal  
applications to provide a complete system. Electric Heaters are  
available, if required. Add-on coils are available for use with  
upflow, downflow, or horizontal furnaces and air handlers.  
WARRANTY  
TECHNICAL GUIDE  
1-year limited parts warranty.  
5-year limited compressor warranty.  
SPLIT-SYSTEM  
AIR CONDITIONERS  
FEATURES  
• QUALITY CONDENSER COILS - The coil is constructed of  
aluminum microchannel tubing and enhanced aluminum fins  
for increased efficiency and corrosion protection.  
13 SEER – R-410A – 3 PHASE  
MODELS:  
TCGD30 THRU 60  
(2.5 THRU 5 NOMINAL TONS)  
• PROTECTED COMPRESSOR - The compressor is inter-  
nally protected against high pressure, temperature, and  
externally by a factory installed high pressure switch. This is  
accomplished by the simultaneous operation of high pres-  
sure relief valve and a temperature sensor which protects the  
compressor if undesirable operating conditions occur. A liq-  
uid line filter-drier further protects the compressor.  
• DURABLE FINISH - The cabinet is made of pre-painted  
steel. The pre-treated galvanized steel provides a better  
paint to steel bond, which resists corrosion and rust creep.  
Special primer formulas and matted-textured finish insure  
less fading when exposed to sunlight.  
• LOWER INSTALLED COST - Installation time and costs are  
reduced by easy power and control wiring connections.  
Available in sweat connect models only. The unit contains  
enough refrigerant for matching indoor coils and 15 feet of  
interconnecting piping. The small base dimension means  
less space is required on the ground or roof.  
• TOP DISCHARGE - The warm air from the top mounted fan  
is blown up away from the structure and any landscaping.  
This allows compact location on multi-unit applications.  
• LOW OPERATING SOUND LEVEL - The upward air flow  
carries the normal operating noise away from the living area.  
The rigid top panel effectively isolates any motor sound. Iso-  
lator mounted compressor and the rippled fins of the con-  
denser coil muffle the normal fan motor and compressor  
operating sounds.  
• LOW MAINTENANCE - Long life permanently lubricated  
ISO 9001  
Certified Quality  
Management System  
motor-bearings need no annual servicing.  
• EASY SERVICE ACCESS - Fully exposed refrigerant con-  
nections, and a single panel covering the electrical controls  
make for easy servicing of the unit.  
• SECURED SERVICE VALVES - Secured re-usable service  
valves are provided on both the liquid and vapor sweat con-  
nections for ease of evacuating and charging.  
LISTED  
• U.L. and C.U.L. listed - approved for outdoor application.  
Due to continuous product improvement, specifications  
are subject to change without notice.  
• Agency Listed - U.L. and C.U.L. listed - approved for out-  
door application. The unit is certified in accordance with the  
Unitary Small Equipment certification program, which is  
based on ARI Standard 210/240.  
Visit us on the web at www.york.com  
Additional rating information can be found at  
www.ahridirectory.org  
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
System Charge for Various Matched Systems  
Outdoor Unit  
Required Orifice or TXV 1,2  
Factory Charge, lbs-oz  
TCGD30S4(3,4)S1  
TCGD36S4(3,4)S1  
0.065/4G1  
4 - 9  
TCGD42S4(3,4)S1  
0.075/4G1  
4 - 5  
TCGD48S4(3,4)S1  
0.073/4H1  
4 - 9  
TCGD60S4(3,4)S1  
0.087/4J1  
0.061/4F1  
3 - 14  
5 - 6  
Indoor Coil3,4  
AHP30  
Additional Charge, oz  
0
2
–
–
0
2
–
–
–
–
–
0
–
–
0
0
–
–
–
0
0
2
2
–
–
–
0
2
–
–
–
–
0
0
–
–
0
8
–
–
–
–
–
8
–
–
–
8
–
–
–
–
0
0
8
–
–
–
0
–
8
–
–
–
–
–
0
–
–
–
0
–
–
–
–
4
0
–
–
–
0
–
–
–
–
–
4
0
–
–
–
–
4
0
–
–
–
0
–
–
–
–
4
–
–
–
–
0
–
–
–
–
4
–
–
–
–
–
0
4
–
–
0
–
0
AHP36  
AHP42  
AHP/SHP60  
AHX30  
AHX36  
AHX42  
AHX48  
AHX60  
F4FP024  
F4FP036  
F4FP040  
F5FP048  
F5FP060  
F6FP030  
F6FP036  
F6FP042  
F6FP048  
F6FP060  
FC/MC/PC32  
FC/MC/PC35  
FC/MC/PC37  
FC/MC/PC43  
FC/MC/PC48  
FC/MC/PC60  
FC/MC62  
HC36  
–
0
–
–
–
2
–
–
–
–
–
2
–
–
–
2
TXV + 2  
–
–
–
–
0
2
–
–
–
0
–
2
–
HC42  
HC60  
UC48  
UC60  
FOOTNOTES:  
1. For applications requiring a TXV use 1TVM series kit.  
2. Approved orifice shipped with outdoor unit.  
3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.  
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.  
PROCEDURES:  
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting  
line tubing.  
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.  
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.  
4. For orifice or TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length.  
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator +  
adder for line set.  
Johnson Controls Unitary Products  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING CAPACITY - With Air Handler Coils  
AIR HANDLER  
COOLING  
NET MBH  
UNIT  
MODEL  
COIL  
RATED  
CFM  
MODEL1  
MODEL  
W
SEER  
EER  
TOTAL  
SENS.  
13 SEER AC WITH MA  
MA12B  
MA12B  
MA12B  
MA14D  
MA16C  
MA14D  
MA16C  
MA16C  
MA20D  
MA16C  
MA20D  
MA20D  
MA20D  
17  
17  
17  
24  
21  
24  
21  
21  
24  
21  
24  
24  
24  
FC/MC35B  
FC/MC43B  
FC/MC43B  
FC/MC48D  
FC/MC43C  
FC/MC48D  
FC/MC48C  
FC/MC48C  
FC/MC48D  
FC60C  
1000  
29.0  
29.0  
35.0  
35.0  
42.0  
42.0  
42.0  
48.0  
48.0  
48.0  
48.0  
57.0  
57.0  
21.0  
21.0  
24.8  
24.8  
29.2  
29.2  
29.2  
34.4  
34.4  
34.4  
34.4  
38.5  
38.5  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
TCGD30S4(3,4)S1  
TCGD36S4(3,4)S1  
1000  
1200  
1200  
1400  
1400  
1400  
1600  
1600  
1600  
1600  
1800  
1800  
TCGD42S4(3,4)S1  
TCGD48S4(3,4)S1  
TCGD60S4(3,4)S1  
FC/MC60D  
FC/MC60D  
FC/MC62D  
13 SEER AC WITH AHP / SHP / AHX / F*FP  
AHP30  
AHP36  
17  
21  
17  
21  
18  
17  
21  
21  
21  
21  
21  
24  
21  
21  
21  
24  
21  
24  
24  
24  
24  
24  
24  
24  
24  
24  
24  
24  
–
–
-
1015  
1040  
1025  
1005  
1050  
1035  
980  
29.0  
29.0  
29.4  
30.0  
29.0  
29.2  
29.4  
35.0  
35.0  
35.2  
35.4  
35.0  
35.8  
41.0  
42.0  
41.0  
42.0  
41.5  
48.0  
48.0  
48.0  
48.0  
48.0  
47.0  
57.0  
58.5  
57.0  
57.5  
21.0  
21.0  
22.2  
22.3  
21.0  
21.6  
21.4  
24.8  
24.8  
25.0  
25.2  
24.8  
25.8  
29.2  
29.9  
29.2  
30.1  
29.4  
34.4  
35.0  
35.4  
34.4  
34.4  
34.8  
38.5  
40.0  
38.5  
39.0  
13.00  
13.00  
14.00  
14.50  
13.00  
13.50  
14.00  
13.00  
13.00  
13.50  
14.00  
13.00  
13.50  
13.00  
14.50  
13.00  
14.00  
13.50  
13.00  
13.50  
13.50  
13.00  
13.00  
13.00  
13.00  
13.50  
13.00  
13.50  
11.00  
11.00  
11.75  
12.00  
11.00  
11.40  
12.00  
11.00  
11.00  
11.50  
11.80  
11.00  
11.50  
11.00  
12.00  
11.00  
11.75  
11.70  
11.00  
11.00  
11.50  
11.00  
11.00  
11.30  
11.00  
11.50  
11.00  
11.50  
AHX30  
TCGD30S4(3,4)S1  
AHX36  
-
F4FP040  
F6FP030  
F6FP036  
AHP36  
–
-
-
–
–
-
1235  
1255  
1225  
1190  
1235  
1290  
1485  
1395  
1455  
1455  
1380  
1675  
1600  
1660  
1600  
1600  
1625  
1850  
1905  
1900  
1710  
AHP42  
AHX36  
TCGD36S4(3,4)S1  
TCGD42S4(3,4)S1  
AHX42  
-
F5FP048  
F6FP042  
AHP42  
–
-
–
-
AHX42  
F5FP048  
F6FP042  
F6FP048  
AHP/SHP48  
AHP/SHP60  
AHX48  
–
-
-
–
–
-
TCGD48S4(3,4)S1  
TCGD60S4(3,4)S1  
F5FP048  
F5FP060  
F6FP048  
AHP/SHP60  
AHX60  
–
–
-
–
-
F5FP060  
F6FP060  
–
-
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.  
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.  
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.  
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power  
input in watt-hours during the same period.  
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.  
— = Not applicable.  
4
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils  
FURNACE**  
COOLING  
NET MBH  
COIL  
MODEL  
UNIT MODEL  
CFM RANGE  
(Min.-max.)  
RATED  
CFM  
W
SEER1  
EER  
TOTAL  
29.0  
29.0  
29.0  
29.0  
29.0  
29.0  
35.0  
35.0  
35.0  
35.0  
35.0  
42.0  
42.0  
42.0  
42.0  
48.0  
48.0  
48.0  
48.0  
48.0  
57.0  
57.0  
57.0  
57.0  
SENS.  
21.0  
21.0  
21.0  
21.0  
21.0  
21.0  
24.8  
24.8  
24.8  
24.8  
24.8  
29.2  
29.2  
29.2  
29.2  
34.4  
34.4  
34.4  
34.4  
34.4  
38.5  
38.5  
38.5  
38.5  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
800 - 1200  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1000 - 1400  
1200 - 1600  
1200 - 1600  
1200 - 1600  
1200 - 1600  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1400 - 1800  
1600 - 2000  
1600 - 2000  
1600 - 2000  
1600 - 2000  
14  
17,21  
14  
FC/MC/PC32  
FC/MC/PC35  
FC/MC/PC37  
FC/MC/PC43  
HC36  
1000  
1000  
1000  
1000  
1000  
1000  
1200  
1200  
1200  
1200  
1200  
1400  
1400  
1400  
1400  
1600  
1600  
1600  
1600  
1600  
1800  
1800  
1800  
1800  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
TCGD30S4(3,4)S1  
17,21  
17  
21  
HC42  
14  
FC/MC/PC37  
FC/MC/PC43  
FC/MC/PC48  
HC42  
17,21  
21,24  
21  
TCGD36S4(3,4)S1  
TCGD42S4(3,4)S1  
TCGD48S4(3,4)S1  
TCGD60S4(3,4)S1  
21,24  
17,21  
21,24  
21  
UC48  
FC/MC/PC43  
FC/MC/PC48  
HC42  
21,24  
21,24  
21,24  
24  
UC48  
FC/MC/PC48  
FC/MC/PC60  
HC60  
21,24  
21,24  
21,24  
24  
UC48  
UC60  
FC/MC/PC60  
FC/MC62  
HC60  
24  
21,24  
UC60  
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.  
** Refer to Quick Selection Chart for specific furnace match-up.  
Johnson Controls Unitary Products  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING CAPACITY - With High Efficiency Motor Furnaces  
COOLING  
Net MBH  
UNIT  
MODEL  
FURNACE  
MODEL  
COIL  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
14  
17  
21  
21  
17  
21  
14  
17  
21  
21  
17  
21  
21  
14  
17  
21  
21  
17  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
17  
21  
21  
17  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
970  
29.2  
30.0  
30.0  
28.8  
29.8  
29.8  
30.0  
30.0  
28.2  
29.6  
30.0  
30.0  
28.2  
35.2  
35.2  
35.2  
35.6  
35.2  
35.4  
35.0  
35.6  
35.8  
35.8  
35.4  
35.4  
34.2  
34.8  
34.6  
34.0  
34.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
42.0  
41.5  
42.0  
42.0  
21.4  
22.8  
22.8  
20.6  
22.8  
22.4  
22.9  
22.9  
19.3  
21.2  
22.9  
22.9  
19.3  
25.4  
25.4  
24.8  
25.6  
25.4  
25.4  
24.6  
25.2  
25.8  
25.8  
25.0  
25.0  
24.8  
25.4  
24.8  
24.6  
24.6  
29.0  
29.9  
29.5  
29.0  
29.6  
29.6  
29.5  
30.1  
29.3  
29.3  
29.7  
29.4  
30.0  
29.2  
29.4  
29.4  
13.20  
14.00  
14.00  
14.00  
14.00  
14.00  
13.80  
14.00  
14.00  
14.00  
13.80  
14.00  
14.00  
13.30  
13.30  
14.00  
13.80  
13.25  
13.45  
13.55  
14.00  
14.00  
13.70  
13.70  
13.70  
13.50  
13.50  
13.15  
13.25  
13.30  
13.50  
13.50  
13.50  
13.50  
13.30  
13.50  
13.80  
14.00  
13.50  
13.50  
13.50  
13.50  
13.50  
13.30  
13.20  
13.40  
11.00  
11.50  
12.00  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
12.00  
11.50  
12.00  
12.00  
11.25  
11.25  
11.50  
11.70  
11.25  
11.40  
11.40  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.50  
11.20  
11.20  
11.25  
11.50  
11.50  
11.50  
11.50  
11.00  
11.00  
11.50  
11.50  
11.50  
11.50  
11.50  
11.00  
11.00  
11.00  
11.00  
11.00  
1120  
1105  
850  
1085  
1075  
1105  
1125  
710  
T*9X*C16  
TCGD30S4(3,4)S1  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
870  
1095  
1055  
720  
T*9X*C16  
T*9X*C20  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
1290  
1300  
1175  
1250  
1270  
1260  
1185  
1185  
1270  
1280  
1205  
1240  
1185  
1300  
1280  
1205  
1240  
1300  
1475  
1415  
1270  
1410  
1400  
1360  
1475  
1425  
1420  
1435  
1400  
1515  
1425  
1420  
1435  
T*9X*C16  
T*9X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
TCGD36S4(3,4)S1  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
UC48D  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
T*9X*C16  
T*9X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
TCGD42S4(3,4)S1  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
UC48D  
For Notes See Page 7.  
6
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)  
COOLING  
Net MBH  
UNIT  
MODEL  
FURNACE  
MODEL  
COIL  
W
RATED  
CFM  
MODEL1  
SEER  
EER  
TOTAL  
SENS.  
13 SEER HP WITH VARIABLE SPEED FURNACES2  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/MC/PC60D  
FC/MC62D  
UC60C  
21  
21  
21  
21  
24  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
24  
21  
21  
21  
21  
21  
21  
24  
21  
21  
1600  
1660  
1565  
1615  
1635  
1605  
1595  
1575  
1625  
1490  
1575  
1625  
1605  
1690  
1575  
1560  
1630  
1645  
1665  
1640  
1735  
1575  
1560  
1630  
1735  
1645  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
48.0  
47.0  
47.5  
47.0  
47.0  
56.5  
57.0  
56.0  
56.0  
56.5  
56.5  
57.0  
56.0  
56.5  
56.0  
56.0  
56.0  
56.5  
56.0  
34.4  
34.4  
34.8  
34.4  
34.8  
34.6  
34.8  
34.6  
34.6  
33.8  
33.8  
33.8  
37.8  
37.8  
37.8  
37.8  
37.8  
37.8  
37.8  
37.2  
38.5  
37.2  
37.2  
37.2  
38.5  
37.2  
13.30  
13.20  
13.10  
13.20  
13.20  
13.30  
13.30  
13.30  
13.40  
13.20  
13.10  
13.10  
13.50  
13.50  
13.30  
13.30  
13.30  
13.30  
13.50  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
13.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
11.00  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
TCGD48S4(3,4)S1  
T*9X*C20  
T*9X*D20  
T*9X*C16  
T*9X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
T*9X*C20  
T*9X*D20  
T*9X*C20  
T*(8,L)X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
TCGD60S4(3,4)S1  
UC60D  
FC/PC60C  
FC/PC60C  
UC60D  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C20  
T*9X*C20  
UC60D  
UC60D  
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.  
2. Variable speed furnaces have B.O.D (Blower on Delay) standard.  
Johnson Controls Unitary Products  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
ACCESSORIES  
SOUND POWER RATINGS*  
Refer to Price Manual for specific model numbers.  
(dBA)  
UNIT  
MODEL  
230V  
76  
460V  
76  
OFF CYCLE TIMER DELAY - Provides a 5-minute off cycle to  
prevent rapid recycling of the compressor.  
30  
36  
76  
76  
ROOM THERMOSTATS - A wide selection of compatible ther-  
mosets are available to provide optimum performance and fea-  
tures for any installation.  
42  
77  
76  
48  
77  
77  
60  
78  
78  
1H/1C, manual changeover electronic non-programmable ther-  
mostat.  
* Rated in accordance with ARI 270-95 Standards.  
1H/1C, auto/manual changeover, electronic programmable,  
deluxe 7-day, thermostat.  
1H/1C, auto/manual changeover, electronic programmable.  
* For the most current accessory information, refer to the price  
book or consult factory.  
TYPICAL INSTALLATION  
MINIMUM 18” SERVICE  
ACCESS CLEARANCE  
ON ONE SIDE  
THERMOSTAT  
60” OVERHEAD  
CLEARANCE  
WEATHERPROOF  
DISCONNECT  
SWITCH  
NEC CLASS 1 WIRING  
6” CLEARANCE  
AROUND PERIMETER  
TO FURNACE OR  
AIR HANDLER  
TERMINAL BLOCK  
NEC CLASS 2 WIRING  
TO INDOOR COIL  
NOTE:  
ALL OUTDOOR WIRING  
MUST BE WEATHERPROOF.  
CONTROL  
ACCESS  
PANEL  
SEAL OPENING(S) WITH  
PERMAGUM OR EQUIVALENT  
TYPICAL FIELD WIRING  
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES  
POWER WIRING  
CONTROL WIRING  
FACTORY WIRING  
24 VOLT CONTROL WIRING  
MINIMUM 18 GA. WIRE  
(NEC CLASS 2)  
POWER WIRING  
FURNACE OR AIR HANDLER TERMINAL BLOCK  
Y R G W  
C
*
TERMINAL W IS ONLY  
REQUIRED ON SYSTEMS  
WITH HEAT.  
CONTACTOR  
TERMINALS  
GND.  
LUG  
*
COIL  
Y
R
G
W
ROOM THERMOSTAT  
CONDENSING UNIT  
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.  
8
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
INDOOR COIL MODEL NO.  
TGCGD30S4(3,4)S1  
FC/MC/PC35  
800  
IDCFM  
1000  
75  
1200  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
80  
80  
62  
75  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
ID WB (°F) 57  
62  
T.C.  
S.C.  
KW  
28.4 31.4 30.8 33.1 34.4 29.8 31.8 31.4 33.4 34.5 31.2 32.3 32.1 33.7 34.7  
28.8 25.8 21.7 21.2 16.0 30.4 28.2 23.6 22.6 17.1 31.9 30.7 25.4 24.0 18.1  
65  
75  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
1.7  
T.C.  
S.C.  
KW  
26.4 28.8 28.2 30.9 32.6 27.9 29.7 28.9 31.4 32.8 29.5 30.5 29.6 31.8 32.9  
26.9 24.7 20.5 20.3 15.4 28.5 27.1 22.6 22.0 16.4 30.2 29.5 24.6 23.7 17.5  
1.8  
1.8  
1.8  
1.9  
1.9  
1.8  
1.8  
1.8  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
1.9  
T.C.  
S.C.  
KW  
24.4 26.3 25.6 28.8 30.9 26.0 27.5 26.4 29.3 31.0 27.7 28.7 27.1 29.8 31.2  
24.9 23.6 19.4 19.4 14.7 26.6 26.0 21.6 21.4 15.8 28.4 28.4 23.9 23.4 16.8  
85  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.0  
2.1  
2.0  
2.0  
2.0  
2.1  
2.1  
T.C.  
S.C.  
KW  
22.4 23.8 23.0 26.7 29.1 24.2 25.3 23.8 29.0 29.3 26.0 26.9 24.7 27.9 29.4  
22.9 22.5 18.2 18.5 14.1 24.8 24.9 20.7 21.2 15.1 26.7 27.3 23.1 23.1 16.2  
95  
2.1  
2.1  
2.1  
2.2  
2.3  
2.2  
2.2  
2.2  
2.2  
2.3  
2.2  
2.2  
2.2  
2.2  
2.3  
T.C.  
S.C.  
KW  
20.5 21.8 20.4 23.7 26.3 22.0 23.1 21.3 24.3 26.4 23.6 24.5 22.1 24.8 26.4  
21.0 20.7 17.1 17.4 13.2 22.6 22.7 19.1 19.7 14.3 24.3 24.7 21.0 22.0 15.4  
105  
115  
125  
2.3  
2.3  
2.3  
2.4  
2.4  
2.4  
2.4  
2.3  
2.4  
2.5  
2.4  
2.4  
2.3  
2.4  
2.5  
T.C.  
S.C.  
KW  
18.6 19.8 17.9 20.9 23.5 19.9 21.0 18.8 21.4 23.5 21.2 22.2 19.6 21.8 23.6  
19.1 18.9 15.9 16.4 12.3 20.5 20.5 17.5 18.6 13.5 22.0 22.2 19.1 20.9 14.7  
2.5  
2.5  
2.4  
2.5  
2.6  
2.5  
2.5  
2.5  
2.5  
2.6  
2.6  
2.6  
2.5  
2.6  
2.6  
T.C.  
S.C.  
KW  
16.8 17.9 15.4 18.1 20.7 17.8 18.9 16.2 18.5 20.7 18.9 19.9 17.1 18.8 20.7  
17.3 17.2 14.8 15.3 11.4 18.4 18.4 16.0 17.6 12.6 19.6 19.6 17.1 19.8 13.9  
2.7  
2.7  
2.6  
2.7  
2.8  
2.7  
2.7  
2.6  
2.7  
2.8  
2.7  
2.7  
2.7  
2.7  
2.8  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.03  
1.00  
1.00  
1.00  
1.01  
1.01  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.06  
1.06  
1.00  
1.00  
1.00  
1.03  
1.02  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.95  
0.95  
1.00  
1.00  
1.00  
0.97  
0.93  
Furnaces  
Coils  
T.C.  
1.01  
1.03  
1.03  
0.99  
1.03  
1.03  
1.03  
1.03  
0.97  
1.02  
1.03  
1.03  
0.97  
S.C.  
1.02  
1.09  
1.09  
0.98  
1.09  
1.07  
1.09  
1.09  
0.92  
1.01  
1.09  
1.09  
0.92  
KW  
1.01  
0.99  
0.95  
0.91  
0.94  
0.94  
0.99  
0.95  
0.89  
0.94  
0.99  
0.95  
0.89  
FC/MC/PC35  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC32A  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC35C  
FC/MC/PC35B  
FC/MC/PC35C  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
–
FC/MC/PC37  
–
FC/MC/PC43  
–
HC36  
–
HC42  
AHP30  
AHP36  
AHX30  
AHX36  
MA12B  
MA12B  
F4FP040  
F6FP030  
F6FP036  
–
T*9X*C16  
–
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
–
–
FC/MC35B  
FC/MC43B  
–
–
–
T*9X*C16  
T*9X*C20  
Johnson Controls Unitary Products  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
INDOOR COIL MODEL NO.  
TCGD36S4(3,4)S1  
FC/MC/PC43  
1000  
IDCFM  
1200  
75  
1400  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
80  
80  
62  
75  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
ID WB (°F) 57  
62  
62  
T.C.  
S.C.  
KW  
34.7 36.1 35.2 37.4 37.3 33.8 35.5 34.8 37.0 37.5 32.9 34.9 34.4 36.6 37.6  
34.3 33.0 27.6 25.5 18.4 33.3 31.0 26.2 24.6 18.0 32.3 29.1 24.7 23.6 17.7  
65  
75  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
1.9  
2.0  
1.9  
2.0  
2.0  
T.C.  
S.C.  
KW  
33.6 34.7 33.6 35.9 36.6 32.6 33.9 33.2 35.5 36.6 31.5 33.2 32.7 35.1 36.6  
33.3 32.5 27.5 25.6 18.6 32.1 30.6 25.8 24.5 18.0 31.0 28.7 24.2 23.3 17.5  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.1  
2.2  
2.2  
2.2  
2.2  
T.C.  
S.C.  
KW  
32.4 33.2 32.0 34.4 35.8 31.3 32.3 31.5 34.1 35.7 30.2 31.5 31.0 33.7 35.5  
32.2 32.0 27.3 25.8 18.8 30.9 30.2 25.5 24.3 18.0 29.6 28.3 23.7 22.9 17.3  
85  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.4  
2.3  
2.4  
2.4  
2.4  
2.4  
T.C.  
S.C.  
KW  
31.3 31.7 30.4 33.0 35.0 30.1 30.7 29.9 35.0 34.8 28.9 29.8 29.4 32.2 34.5  
31.1 31.5 27.2 26.0 19.0 29.7 29.7 25.2 24.9 18.0 28.3 27.9 23.2 22.5 17.1  
95  
2.6  
2.6  
2.6  
2.6  
2.7  
2.6  
2.6  
2.6  
2.6  
2.7  
2.5  
2.6  
2.6  
2.6  
2.6  
T.C.  
S.C.  
KW  
27.9 28.8 27.2 29.8 32.5 27.0 27.8 26.6 29.4 32.2 26.0 26.9 25.9 29.0 31.9  
28.7 28.9 25.0 25.0 18.4 27.3 27.2 23.2 23.2 17.3 25.8 25.6 21.5 21.4 16.2  
105  
115  
125  
2.8  
2.8  
2.8  
2.8  
2.9  
2.8  
2.8  
2.8  
2.8  
2.9  
2.7  
2.8  
2.7  
2.8  
2.9  
T.C.  
S.C.  
KW  
24.6 26.0 24.2 26.8 30.1 23.9 25.1 23.4 26.3 29.8 23.3 24.1 22.6 25.9 29.5  
26.3 26.3 22.8 24.1 17.8 24.9 24.8 21.3 22.2 16.6 23.5 23.3 19.8 20.3 15.4  
3.0  
3.0  
3.0  
3.0  
3.1  
3.0  
3.0  
2.9  
3.0  
3.1  
2.9  
2.9  
2.9  
3.0  
3.1  
T.C.  
S.C.  
KW  
21.3 23.2 21.1 23.7 27.6 20.9 22.3 20.2 23.2 27.3 20.5 21.3 19.3 22.7 27.0  
23.9 23.8 20.6 23.2 17.2 22.5 22.4 19.4 21.2 15.9 21.1 21.0 18.2 19.2 14.6  
3.2  
3.2  
3.2  
3.2  
3.4  
3.2  
3.2  
3.1  
3.2  
3.3  
3.1  
3.1  
3.1  
3.2  
3.3  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.01  
1.00  
1.00  
1.00  
1.02  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.02  
1.00  
1.00  
1.00  
1.04  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.96  
0.94  
1.00  
1.00  
1.00  
0.98  
Furnaces  
Coils  
T.C.  
1.01  
1.01  
1.01  
1.02  
1.01  
1.01  
1.00  
1.02  
1.02  
1.02  
1.01  
1.01  
0.98  
0.99  
0.99  
0.97  
0.97  
S.C.  
1.02  
1.02  
1.00  
1.03  
1.02  
1.02  
0.99  
1.02  
1.04  
1.04  
1.01  
1.01  
1.00  
1.02  
1.00  
0.99  
0.99  
KW  
0.98  
0.98  
0.96  
0.96  
0.98  
0.98  
0.96  
0.97  
0.98  
0.98  
0.97  
0.97  
0.93  
0.95  
0.97  
0.95  
0.95  
FC/MC/PC43  
T*(8,L)X*A12  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC37A  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
–
FC/MC/PC48  
–
HC42  
–
UC48  
AHP36  
AHP42  
AHX36  
AHX42  
MA12B  
MA14D  
F5FP048  
F6FP042  
–
–
T*9X*C16  
–
T*9X*C20  
–
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC43B  
FC/MC48D  
–
–
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
UC48D  
10  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
INDOOR COIL MODEL NO.  
TCGD42S4(3,4)S1  
FC/MC/PC43  
1200  
IDCFM  
1400  
75  
1600  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
80  
80  
62  
75  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
ID WB (°F) 57  
62  
T.C.  
S.C.  
KW  
44.4 45.5 43.6 47.0 48.5 45.9 46.5 45.0 48.5 49.8 47.5 47.5 46.5 50.1 51.1  
41.5 35.6 29.7 28.7 21.5 42.9 37.5 31.4 30.2 22.9 44.4 39.4 33.2 31.7 24.3  
65  
75  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.6  
2.5  
2.5  
2.5  
2.5  
2.6  
T.C.  
S.C.  
KW  
42.3 42.9 41.2 45.1 46.6 44.2 44.3 42.7 46.6 47.9 46.0 45.7 44.2 48.1 49.1  
39.4 35.2 29.2 28.5 21.3 41.1 37.4 31.1 30.1 22.4 42.9 39.7 33.0 31.8 23.6  
2.7  
2.7  
2.7  
2.8  
2.8  
2.7  
2.7  
2.7  
2.8  
2.8  
2.8  
2.8  
2.8  
2.8  
2.9  
T.C.  
S.C.  
KW  
40.2 40.3 38.9 43.3 44.6 42.4 42.1 40.4 44.7 45.9 44.6 43.9 41.9 46.0 47.2  
37.2 34.7 28.7 28.2 21.2 39.3 37.3 30.8 30.0 22.0 41.5 40.0 32.9 31.8 22.9  
85  
3.0  
3.0  
3.0  
3.0  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
T.C.  
S.C.  
KW  
38.2 37.7 36.5 41.5 42.7 40.7 39.9 38.0 42.0 44.0 43.2 42.1 39.6 43.9 45.3  
35.0 34.3 28.1 28.0 21.0 37.5 37.3 30.5 29.4 21.6 40.0 40.3 32.8 31.9 22.2  
95  
3.2  
3.2  
3.2  
3.3  
3.4  
3.3  
3.3  
3.3  
3.3  
3.4  
3.3  
3.3  
3.3  
3.4  
3.4  
T.C.  
S.C.  
KW  
35.3 34.7 32.8 37.4 38.7 37.5 36.7 34.2 38.6 39.8 39.8 38.8 35.6 39.8 40.9  
32.3 32.1 26.5 26.4 19.6 34.5 34.5 28.8 28.4 20.4 36.7 37.0 31.1 30.5 21.2  
105  
115  
125  
3.5  
3.5  
3.5  
3.6  
3.7  
3.5  
3.5  
3.5  
3.6  
3.7  
3.6  
3.6  
3.5  
3.6  
3.7  
T.C.  
S.C.  
KW  
32.4 31.7 29.2 33.4 34.8 34.5 33.6 30.5 34.6 35.7 36.5 35.5 31.8 35.7 36.7  
29.7 30.0 25.0 24.9 18.2 31.6 31.9 27.2 27.0 19.3 33.5 33.8 29.4 29.1 20.3  
3.7  
3.7  
3.7  
3.8  
4.0  
3.8  
3.8  
3.7  
3.8  
4.0  
3.8  
3.8  
3.7  
3.9  
4.0  
T.C.  
S.C.  
KW  
29.6 28.8 25.6 29.4 30.9 31.4 30.5 26.8 30.5 31.7 33.2 32.2 28.0 31.7 32.5  
27.1 27.9 23.5 23.4 16.8 28.7 29.3 25.6 25.6 18.1 30.2 30.6 27.6 27.8 19.4  
4.0  
4.0  
3.9  
4.0  
4.2  
4.0  
4.0  
4.0  
4.1  
4.3  
4.1  
4.1  
4.0  
4.1  
4.3  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
0.97  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.99  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.02  
1.00  
1.00  
1.00  
1.00  
1.03  
1.01  
KW  
1.00  
1.00  
1.00  
0.97  
0.92  
1.00  
1.00  
1.00  
1.00  
0.94  
0.93  
Furnaces  
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.99  
1.00  
1.00  
S.C.  
0.99  
1.02  
1.01  
0.99  
1.02  
1.02  
1.01  
1.03  
1.00  
1.00  
1.02  
1.01  
1.03  
1.00  
1.01  
1.01  
KW  
0.96  
0.96  
0.96  
0.96  
1.00  
1.00  
0.96  
0.96  
0.96  
0.96  
0.96  
1.00  
1.00  
0.99  
1.00  
1.00  
FC/MC/PC48  
T*(8,L)X*B12  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*B12  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC43B  
FC/MC/PC43C  
FC/MC/PC43C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
UC48C  
–
HC42  
–
UC48  
AHP42  
AHX42  
MA16C  
MA14D  
MA16C  
F5FP048  
F6FP042  
F6FP048  
–
–
T*9X*C16  
FC/MC43C  
T*9X*C20  
FC/MC48D  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC48C  
–
–
–
T*9X*C20  
T*9X*D20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
UC48C  
UC48C  
T*9X*C20  
UC48C  
T*9X*D20  
UC48D  
Johnson Controls Unitary Products  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
INDOOR COIL MODEL NO.  
TCGD48S4(3,4)S1  
FC/MC/PC48  
1400  
IDCFM  
1600  
75  
1800  
75  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
80  
80  
62  
75  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
ID WB (°F) 57  
62  
62  
T.C.  
S.C.  
KW  
49.7 51.4 50.6 55.8 54.6 52.0 53.1 51.9 56.4 55.4 54.4 54.7 53.2 56.9 56.3  
47.2 43.1 35.9 36.0 26.1 49.2 45.9 38.2 37.4 27.6 51.2 48.7 40.4 38.8 29.0  
65  
75  
2.7  
2.8  
2.8  
2.8  
2.8  
2.7  
2.8  
2.8  
2.8  
2.8  
2.7  
2.8  
2.8  
2.8  
2.9  
T.C.  
S.C.  
KW  
47.5 48.6 47.7 52.9 52.4 49.8 50.3 48.9 53.6 53.1 52.0 52.1 50.2 54.3 53.8  
44.9 42.0 35.0 34.9 25.4 47.0 44.8 37.1 36.5 26.8 49.0 47.6 39.3 38.2 28.1  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.2  
3.0  
3.0  
3.0  
3.1  
3.2  
T.C.  
S.C.  
KW  
45.4 45.8 44.8 49.9 50.2 47.5 47.6 46.0 50.8 50.8 49.7 49.4 47.1 51.7 51.4  
42.7 41.0 34.0 33.8 24.8 44.7 43.7 36.1 35.7 26.0 46.8 46.5 38.2 37.6 27.2  
85  
3.2  
3.3  
3.3  
3.4  
3.4  
3.3  
3.3  
3.3  
3.4  
3.5  
3.3  
3.3  
3.3  
3.4  
3.5  
T.C.  
S.C.  
KW  
43.2 42.9 42.0 47.0 47.9 45.3 44.9 43.1 48.0 48.4 47.4 46.8 44.1 49.1 48.9  
40.4 39.9 33.0 32.7 24.1 42.4 42.6 35.1 34.6 25.2 44.5 45.4 37.1 37.0 26.3  
95  
3.5  
3.5  
3.5  
3.6  
3.7  
3.6  
3.6  
3.5  
3.7  
3.8  
3.6  
3.6  
3.6  
3.7  
3.8  
T.C.  
S.C.  
KW  
39.8 39.4 37.3 42.4 43.6 41.6 41.1 38.4 43.4 44.0 43.5 42.9 39.5 44.4 44.5  
37.1 37.0 30.9 30.9 22.9 38.9 39.3 32.9 33.0 23.9 40.8 41.5 34.9 35.1 25.0  
105  
115  
125  
3.8  
3.8  
3.8  
3.9  
4.0  
3.9  
3.9  
3.8  
3.9  
4.1  
3.9  
3.9  
3.8  
4.0  
4.1  
T.C.  
S.C.  
KW  
36.5 35.9 32.7 38.0 39.3 38.1 37.5 33.9 38.9 39.8 39.7 39.1 35.1 39.8 40.2  
33.9 34.2 28.9 29.2 21.6 35.5 36.0 30.9 31.3 22.7 37.2 37.7 32.8 33.3 23.8  
4.1  
4.1  
4.0  
4.2  
4.3  
4.1  
4.1  
4.1  
4.2  
4.4  
4.2  
4.2  
4.1  
4.2  
4.4  
T.C.  
S.C.  
KW  
33.1 32.4 28.1 33.5 35.1 34.5 33.8 29.4 34.4 35.5 35.9 35.3 30.6 35.2 36.0  
30.7 31.4 26.9 27.5 20.4 32.1 32.7 28.8 29.6 21.5 33.5 34.0 30.7 31.6 22.5  
4.4  
4.4  
4.3  
4.4  
4.6  
4.4  
4.4  
4.3  
4.5  
4.7  
4.5  
4.5  
4.4  
4.5  
4.7  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
1.03  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.01  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.96  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.95  
Furnaces  
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.99  
0.98  
0.98  
S.C.  
1.00  
1.00  
1.01  
1.00  
1.01  
1.01  
1.01  
1.01  
1.01  
0.98  
0.98  
0.98  
KW  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
0.98  
0.99  
0.98  
0.98  
FC/MC/PC60  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48C  
FC/MC/PC48D  
FC/PC60C  
–
HC60  
–
UC48  
–
UC60  
T*9X*C20  
AHP/SHP48  
AHP/SHP60  
AHX48  
MA16C  
MA20D  
MA16C  
MA20D  
F5FP048  
F5FP060  
F6FP048  
–
T*9X*D20  
–
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
–
FC/MC/PC60D  
FC/PC60C  
FC/MC48C  
FC/MC48D  
T*9X*C20  
FC/PC60C  
FC60C  
T*9X*D20  
FC/MC/PC60D  
FC/PC60C  
FC/MC60D  
T*9X*C16  
–
–
–
T*9X*C20  
FC/PC60C  
12  
Johnson Controls Unitary Products  
Download from Www.Somanuals.com. All Manuals Search And Download.  
415571-UTG-C-0309  
COOLING PERFORMANCE DATA  
AIR CONDITIONER MODEL NO.  
INDOOR COIL MODEL NO.  
TCGD60S4(3,4)S1  
FC/MC/PC60  
1400  
IDCFM  
1600  
75  
1800  
CONDENSING  
ENTERING AIR  
TEMPERATURE  
ID DB (°F)  
80  
80  
62  
75  
62  
80  
67  
80  
72  
80  
57  
80  
62  
80  
67  
80  
72  
80  
57  
80  
62  
75  
62  
80  
67  
80  
72  
ID WB (°F) 57  
62  
T.C.  
S.C.  
KW  
55.8 63.8 62.1 65.2 71.9 60.3 65.7 62.8 66.7 69.8 64.8 67.5 63.5 68.2 67.8  
54.7 51.6 41.4 41.1 34.1 58.4 54.2 43.9 42.6 31.9 62.1 56.8 46.5 44.2 29.6  
65  
75  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.0  
3.0  
3.1  
3.1  
3.0  
3.1  
3.0  
3.1  
3.1  
T.C.  
S.C.  
KW  
56.9 61.1 58.9 62.7 69.7 59.2 63.0 59.9 64.3 67.9 61.4 64.9 61.0 65.9 66.0  
53.9 50.4 40.5 40.0 33.5 55.8 53.1 43.1 41.8 31.5 57.7 55.7 45.6 43.6 29.5  
3.4  
3.5  
3.5  
3.5  
3.6  
3.4  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
T.C.  
S.C.  
KW  
58.0 58.4 55.7 60.3 67.6 58.0 60.4 57.1 61.9 65.9 58.1 62.4 58.5 63.6 64.1  
53.2 49.3 39.7 39.0 32.9 53.3 52.0 42.2 41.0 31.2 53.4 54.7 44.8 42.9 29.4  
85  
3.9  
3.9  
3.9  
3.9  
4.0  
3.9  
3.9  
3.9  
3.9  
4.0  
3.9  
3.9  
3.9  
3.9  
4.0  
T.C.  
S.C.  
KW  
59.1 55.7 52.5 56.9 65.5 56.9 57.8 54.3 57.0 63.9 54.7 59.8 56.0 61.2 62.2  
52.4 48.1 38.8 37.9 32.3 50.7 50.9 41.4 38.8 30.8 49.0 53.6 43.9 42.3 29.4  
95  
4.3  
4.3  
4.3  
4.4  
4.5  
4.3  
4.3  
4.3  
4.4  
4.4  
4.3  
4.3  
4.3  
4.4  
4.4  
T.C.  
S.C.  
KW  
56.4 52.2 48.8 54.0 60.1 54.0 54.3 50.5 55.7 59.7 51.6 56.3 52.2 57.4 59.4  
49.7 45.9 37.5 36.5 29.7 47.9 48.3 40.0 38.7 29.4 46.2 50.6 42.5 40.9 29.0  
105  
115  
125  
4.9  
4.9  
4.9  
4.9  
5.0  
4.9  
4.9  
4.9  
5.0  
5.0  
4.9  
4.9  
4.9  
5.0  
5.0  
T.C.  
S.C.  
KW  
53.8 48.8 45.2 50.2 54.8 51.2 50.9 46.8 51.9 55.7 48.7 53.0 48.5 53.6 56.6  
47.1 43.8 36.2 35.0 27.3 45.3 45.7 38.6 37.3 27.9 43.5 47.7 41.1 39.6 28.6  
5.5  
5.4  
5.4  
5.5  
5.6  
5.5  
5.5  
5.4  
5.5  
5.6  
5.4  
5.5  
5.4  
5.5  
5.6  
T.C.  
S.C.  
KW  
51.2 45.4 41.6 46.5 49.4 48.5 47.5 43.2 48.2 51.6 45.7 49.7 44.8 49.8 53.8  
44.5 41.7 34.9 33.6 24.9 42.6 43.2 37.3 35.9 26.5 40.7 44.7 39.7 38.3 28.2  
6.1  
6.0  
5.9  
6.1  
6.2  
6.0  
6.0  
6.0  
6.1  
6.2  
6.0  
6.0  
6.0  
6.1  
6.2  
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.  
Multipliers for determining the performance with other indoor sections.  
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed  
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.  
Air Handlers  
–
Coils  
T.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
S.C.  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
1.00  
KW  
1.00  
1.00  
1.00  
1.00  
0.98  
1.00  
1.00  
1.00  
0.96  
Furnaces  
Coils  
T.C.  
0.99  
1.00  
0.98  
0.98  
0.99  
0.99  
1.00  
0.98  
0.99  
0.98  
0.98  
0.98  
0.99  
0.98  
S.C.  
0.98  
0.98  
0.98  
0.98  
0.98  
0.98  
0.98  
0.97  
1.00  
0.97  
0.97  
0.97  
1.00  
0.97  
KW  
0.99  
1.00  
0.98  
0.98  
0.99  
0.99  
1.00  
0.98  
0.99  
0.98  
0.98  
0.98  
0.99  
0.98  
FC/MC62  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
FC/PC60C  
FC/MC/PC60D  
FC/PC60C  
FC/PC60C  
FC/MC/PC60D  
FC/MC/PC60D  
FC/MC62D  
UC60C  
–
HC60  
–
UC60  
AHP/SHP60  
AHX60  
MA20D  
MA20D  
F5FP060  
F6FP060  
–
T*9X*C20  
–
T*9X*D20  
FC/MC60D  
T*9X*C20  
FC/MC62D  
T*(8,L)X*C20  
T*(8,L)X*C16  
T*(8,L)X*C20  
T*9X*C16  
–
–
UC60D  
FC/PC60C  
FC/PC60C  
UC60D  
T*9X*C20  
T*9X*D20  
T*(8,L)X*C20  
T*9X*C20  
UC60D  
UC60D  
Johnson Controls Unitary Products  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Subject to change without notice. Printed in U.S.A.  
Copyright © 2009 by Johnson Controls, Inc. All rights reserved.  
415571-UTG-C-0309  
Supersedes 415571-UTG-B-0708  
Johnson Controls Unitary Products  
5005 York Drive  
Norman, OK 73069  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop P 604 GB User Manual
Intel Computer Accessories IQ80960RM User Manual
Jenn Air Ventilation Hood LI3UUB User Manual
JVC Camcorder LYT2077 001B M User Manual
JVC Car Stereo System KWR710 User Manual
JVC Flat Panel Television PD 50X795 User Manual
Kenwood Marine Radio TR 7400A User Manual
Kenwood Video Game Console X3 User Manual
Kidde Smoke Alarm 1SF23 9HI User Manual
KitchenAid Microwave Oven KBHV109 User Manual