JLWM 1203
1200 spin washing machine
Instruction manual
Wash time
Delay start
30 Minute wash
Spin
Off
90°
Economy 60°
1200
900
Stain
Drain
60°
Rinse
Economy 40°
700
Rinse hold
40°
30°
60°
Door lock
500
Soak
Cold
l
None
Spin
o
JLWM1203
30°
Start/Pause
W
o
Quick
Intensive Extra rinse
Prewash
Hand wash
Delicates 30°
Economy 40°
40°
Delicates 40°
30°
Child lock
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Environmental Information
After unpacking please dispose of packaging with
due regard to safety and the environment.
●
For information on maintenance and cleaning your
●
●
●
washing machine see pages 24 - 25 of this
instruction manual.
Materials marked with the symbol
recyclable.
are
Service
●
This product should only be repaired or serviced by
Check with your local Council to see if there are
facilities in your area for recycling this appliance.
an authorised Service Engineer and only genuine
approved spare parts should be used.
WARNING:
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Normally soiled laundry may be washed without
The symbol
on the product or on its packaging
prewashing in order to save detergent, water and
time (the environment is protected too!).
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product.
For more detailed information about recycling of
this product, please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
●
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For the User
For the Installer
Important Safety Information
2-3
2
Installation
Technical Specifications
Unpacking
Positioning
Installation on a suspended floor
Plumbing in
6
6
7
7
7
8
Installation
Child safety
2
Description of the Appliance
Detergent dispenser drawer
Child safety feature
5
5
5
Water inlet
Water drainage
Levelling
In the interest of the environment
Electrical connection
Permanent connection
8
8-9
9
10
11
11
The Control Panel
12-15
Programme information
16
Using the washing machine
Load the laundry
Measure out the detergent
Measure out the fabric softener
Switch the machine on
17-19
17
17
17
17
Select the desired programme/temperature
Select the spin speed or the “None” option
Select the desired options
Select the “Delay start”
Start the programme
How to change an option or a programme
during its cycle
How to interrupt a programme
How to open the door during the cycle of
a programme
17
18
18
18
Maintenance and Cleaning
Descaling
After each wash
Maintenance Wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
24-25
24
24
24
24
24
18
18
19
24
24-25
25
19
19
25
25
End of programme
Hints & Tips on Washing
Wash Care Symbols
Washing Programmes
20
21
22-23
Something Not Working
Repairs - After Sales Service
26-27
27
Guide to use the Instruction Manual
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1 Detergent dispenser drawer
1
2
2 Control panel
3 Door handle
4 Drain pump
5 Adjustable feet
Wash time
Delay start
30 Minute wash
Spin
Off
90°
Economy 60°
1200
900
Stain
Drain
60°
Rinse
Soak
Cold
o o
Economy 40°
700
Rinse hold
40°
30°
60°
500
Door lock
l
None
Spin
JLWM1203
30°
Quick
Start/Pause
W
rewash
Intensive Extra rinse
P
Hand wash
Delicates 30°
Economy 40°
40°
Delicates 40°
30°
Child lock
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
SM001
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin. This prevents the
door from being closed.
P1131
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
63 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
0.05 MPa (0.5 bar)
0.80 MPa (8. bar)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool/Hand wash/30 Minute wash
6 kg
3 kg
3 kg
2 kg
SPIN SPEED
MaximumZ 16 S
12 00 rpm
CONSUMPTION DATA FOR WASHING
6 KG NORMALLY SOILED COTTON
ITEMS WITH PROGRAMME
Energy
Water
1.02 kWh
49 litres
“ COTTONS ECONOMY 60° ”:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
Keep all packaging away from children.
You are advised to keep all the transit bolts for re-use
in case the machine is to be transported again.
After removing all the packaging, with assistance
carefully lay machine on it’s back to remove the
polystyrene base from the bottom.
HEC0010
HEC0005
Remove the power supply cable and the draining hose
from the hose holders on the rear of the appliance.
Connect the water inlet hose as described under the
paragraph “Water inlet”.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
HEC0001
HEC0008
Never place cardboard, wood or similar materials
under the machine to compensate for any unevenness
in the floor.
With the spanner provided unscrew and remove the
central rear bolt A.
Unscrew and remove the two large rear bolts B and
the six smaller bolts C.
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
A
C
Warning
The machine should NOT be placed on deep
pile carpeting.
B
B
C
HEC0003S
HEC00022
Remove the bracket D, refit the six smaller bolts C and
slide out the relevant plastic spacer E.
Installation on a Suspended
Floor
Suspended wooden floors are particularly susceptible
to vibration. To help prevent vibration we recommend
you place a waterproof wood panel, at least 15 mm
thick under the appliance, secured to at least 2 floor
boards with screws. If possible install the appliance in
one of the corners of the room, where the floor is
more stable.
E
C
D
HEC0011S
HEC0023 C
Note
Open the porthole and remove the polystyrene block
fitted with the adhesive tape on the door seal.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Set the hose correctly by loosening the ring nut.
After positioning the inlet hose, be sure to tighten the
ring nut again to prevent leaks.
Plumbing In
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
5. Connect the hose to a tap with a 3/4” thread.
Always use the hose supplied with the appliance.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or
qualified plumber.
P1088
Installation should comply with local water authority
and building regulations’ requirements.
Water inlet
The appliance must be connected to a cold
water supply.
An inlet hose is supplied and can been found inside the
machine drum.
A minimum water pressure of 0.5 bar is required for
safe operation of the appliance.
Do not use the hose from your previous
machine to connect to the water supply.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
1. Open the porthole and extract the inlet hose .
2. Connect the hose with the angled connection to the
machine.
There should be a minimum vertical distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom
of the water storage tank.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
A
HEC0024
3. Remove the security gasket cup by turning and
pulling it away. Pay attention not to move or remove
the gasket.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
“U” piece
supplied
HEC0006QL
P1199
Important!
Do not place the inlet hose downwards. Angle
the hose to the left or right depending on the
position of your water tap.
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
38 mm (½”)
standpipe
diameter
½
P1197
HEC0013
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
When discharging into a standpipe ensure that the top
of the standpipe is no more than 90cm (35.4'') and no
less than 60cm (23.6'') above floor level.
3 pin
Loop
HEC0012
P1198
Important
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
Before connecting the machine to new pipework or to
pipework that has not been used for some time, run off
a reasonable amount of water to flush out any debris
that may have collected in the pipes.
If your drain hose looks like this (see below) you do
not require the “U” piece”. Just push the hose firmly
into the standpipe.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable.
If necessary, check the setting with a spirit level.
P1212
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
HEC007S
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, (see note on
positioning), noise and displacement of the machine
during operation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
In the interest of the environment
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
SHOWER
SINK TOILET
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
RIVER
RIVER
P0987
It is essential that these appliances are not connected
to the surface water drainage system as this water is
discharged directly into a river or stream and may
cause pollution.
If you require any further advice please contact your
local water authority.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
GREEN & YELLOW
E
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
L
N
WARNING: THIS APPLIANCE MUST BE
EARTHED.
BROWN
BLUE
CORD CLAMP
P1041
The manufacturer declines any liability
should this safety measure not be
observed.
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug.
Should the appliance power supply cable
need to be replaced, this must be carried
out by a Service Force agent (see page 27).
Proceed as follows:
1.The wire coloured green and yellow must be
connected to the terminal marked with the letter
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
«E» or by the earth symbol
and yellow.
or coloured green
2.The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
3.The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
4.Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
P
r o
M
d
o d
.
N o
.
. . . . .
.
. . . . . . . . .
. .
.
.
. . .
S
e r
.
N
o
.
.
. . .
. . . . .
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
WARNING:
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The power supply cable must be easily
accessible after installing the appliance.
The wires in the mains lead are coloured in accordance
with the following code:
The appliance should not be connected to
the electrical supply by means of an
extension cable.
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance
with the current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
Wash time
t
Delay star
30 Minute wash
Spin
Off
90°
Economy 60°
Stain
1200
900
Drain
60°
Rinse hold
Rinse
Economy 40°
700
Door lock
40°
30°
60°
500
Soak
Cold
None
JLWM1203
o o l
30°
Start/Pause
Quick
W
e
Extra rinse
Intensiv
Prewash
Spin
Economy 40°
40°
Hand wash
Delicates 30°
Delicates 40°
30°
Child lock
4
1
2
3
5 6 7 8 9 10 11
Attention!
1 Detergent dispenser drawer
2 Programme selector dial
If you turn the programme selector dial to another
programme when the machine is working, the red
Start/Pause pilot light will flash 3 times and the
message Err is displayed on the display to indicate a
wrong selection. The machine will not perform the
new selected programme.
The programme selector dial is divided into the
following sections:
• Cottons
• Synthetics
• Delicates
3 “Spin” button
Press this button repeatedly to change the spin speed
or to select position “None” (no spin), if you want
your laundry to be spun at a speed different from the
one proposed by the washing machine. The relevant
light will light up.
• Wool Hand washing
• Special programmes from “Soak” to “30 Minute
wash”
/
• Reset/Off programme Off
Spin speed
The following speeds are available for the different
fabrics:
• Cottons, linen:
500/700/900 max 1200 r.p.m. ;
30 Minute wash
Spin
Off
90°
Economy 60°
Drain
60°
Rinse
Soak
Economy 40°
40°
30°
60°
Cold
o o l
30°
W
Economy 40°
40°
Hand wash
Delicates 30°
• Synthetics and Wool/Hand wash:
500/700 max 900 r.p.m.;
Delicates 40°
30°
• Delicates and 30 Minute wash :
“
”
500 max 700 r.p.m.
The selector dial can be turned either clockwise or
anticlockwise.
“Economy” position corresponds to an ENERGY
SAVING programme and “Cold” to a cold wash.
Before setting the dial to any position ensure that the
machine is turned to the “Off” position.
Position “None”
By selecting the option “None” all the spinning phases
are cancelled and the last rinse water is drained.
If you select this option with programmes for cotton,
synthetics and delicates, the machine will perform
some extra rinses.
Important!
At the end of the programme the selector dial
must be turned to position “Off”, to switch the
machine off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
-Select “Spin” programme. Select the spin speed by
means of the relevant button and then press the
“Start/Pause” button. The water is emptied out
and the laundry is spun at the selected spin speed.
Programme options buttons
Depending on the programme, different options can be
selected together. These must be selected after
choosing the desired programme and before pressing
the “Start/Pause” button.
Attention!
Before selecting the Drain” programme or “Spin”
“
When these buttons are pressed, the corresponding
pilot lights illuminate. When they are pressed again, the
pilot lights go out.
programme the selector dial must first be turned to
the «Off» position.
If an option which is not compatible with the set
wash programme is selected, the red Start/Pause
light flashes 3 times and the message Err is
displayed for about 2 seconds.
5 “Intensive” button
This option can be selected for heavily soiled cottons. If
you press this button the washing intensity will be
increased and the washing time will be prolonged by
few minutes depending on the selected temperature.
This option is not available for “Economy”,
Synthetics, Wool/Hand wash, Delicates and “30
Minute wash” programmes and in combination with
“Quick” option.
4 “Prewash / Rinse hold /
Stain” button
Press this button repeatedly, to select only one of the
following options:
• Prewash: select this option if you wish your laundry
to be prewashed before the main wash
6 “Extra rinse” button
(not available for Wool and “30 Minute wash”).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained. This option can be selected for heavily soiled
laundry.
This option can be selected with all programmes,
except the Wool programmes and “30 Minute wash”.
The machine performs some additional rinses.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
• “Stain”: select this button if you wish to add a stain
phase to the washing of heavily soiled laundry. Pour
a stain removing detergent into the compartment
7 “Quick” button
This option can be used for lightly soiled (not for Wool,
Hand wash programmes, “30 Minute wash” and
Economy programmes) in order to obtain a good
washing result in a short time. The washing time will be
reduced according to the type of fabric and the selected
temperature (Max recommended load = 3 kg for
Cottons and 1 Kg for Synthetics). “Quick” cannot be
used in combination with the “Intensive” option.
marked
.
This function is available in cotton, synthetic
and delicates programmes with a temperature
of 40° or higher.
The washing time will be prolonged by few minutes.
• “Rinse hold”: when you choose this option, the
machine will not drain the water of the last rinse, this
will ensure the minimum of creasing to laundry.
At the end of the cycle, the light corresponding to
the option “Rinse hold” and the “Door lock” light
are on, the “Start/Pause” button light goes out and
the display shows a flashing «0».
The door cannot be opened because the water must
be drained.
To empty out water there are 2 possibilities:
Child lock
This function works in two different ways:
●
If enabled before the «Start/Pause» button is
pressed, it prevents the machine from being
started.
●
If enabled after pressing the «Start/Pause»
button, it prevents any changes being made to the
programmes or options selected.
-Select Drain” programme and press the
“
“Start/Pause” button : the water is emptied out
without spinning.
To enable or disable this function, press the «Spin»
and «Prewash» buttons simultaneously for approx
6 seconds until the icon
appears on or
disappears from the display.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.00
8 Display (Wash time)
The following pieces of information are shown on the
display:
● Duration of washing programme in hours and
minutes, after you have selected a programme.
The delay time (20 hours max) is displayed for 3
seconds, then the duration of the selected
programme reappears.
After you have pressed the Start/Pause button, the
countdown is updated every hour, and, for the last
hour, every minute.
● An incorrect option selection has been made:
this is indicated by the message Err for about 2
seconds when a function incompatible with the
current programme is selected.
2.00
While the programme is running (after you have
pressed the Start/Pause button), the displayed time
value decreases by one unit every minute.
● The washing machine has completed the
programme: this is indicated by a flashing zero.
The “Door lock” pilot light and the Start/Pause light
go out and the door can be opened.
● An alarm code indicates a fault with the machine
(see the relevant chapter).
● The washing machine has stopped with water
in the tub, at the end of the “Soak” or a
programme with the “Rinse hold” option: this is
indicated by a flashing zero. The Start/Pause light
goes out but the “Door lock” pilot light is still on.
The door cannot be opened.
E20
9 Start/Pause button
To start the selected programme, press the
Start/Pause button; the green pilot light stops
flashing.
If you have selected a delay time, the countdown will
begin and will be shown on the display.
0
If your laundry is not removed during 10 minutes
after the programme has finished, all pilot lights and
the display will switch off and the energy saving
system will be enabled. Only the green Start/Pause
light flashes to indicate that the appliance has to be
switched off.
To interrupt a programme which is running, press
the Start/Pause button: the green pilot light starts
to flash.
To restart the programme from the point at which
it was interrupted, press the Start/Pause button
again.
● Delay start, a time value indicated in hours and
minutes and selected using the delay start button.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
If an incorrect option is selected, the red pilot light
for the Start/ Pause button flashes 3 times and the
message Err is displayed for about 2 seconds.
The wash programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up to
a maximum of 20 hours by means of this button.
Important! You must set the washing machine to
Pause before you make any change in the programme
in progress.
If you wish to add laundry to the machine during
the delay time press Start/Pause button to put the
machine in pause. Add the laundry, close the door
and press the Start/Pause button again.
You can cancel the delay time at any moment,
before you press the Start/Pause button.
10 “Door lock” light
This pilot light illuminates to indicate that the appliance
starts operating and the door is locked. It stays on
during the whole programme.
Selecting the delayed start
You must select this option after you have set the
programme and before you press the Start/Pause
button.
When the light goes out, the door can be opened.
• Select the programme and the required options.
• Select the delay start.
Door lock
• Press Start/Pause button: the machine starts its
hourly countdown.
Start/Pause
The programme will start after the selected delay
has expired.
Cancelling the delayed start
The “Door lock” pilot light indicates if the door
can be opened:
• Press Start/Pause button.
• Press “Delay start” button once until the symbol
• light on: the door cannot be opened. The
appliance is running.
0’
« » is displayed.
• Press “Start/Pause button again.
• light off: the door can be opened.
The washing programme is finished.
The Delay Start cannot be selected with “Drain”
programme.
When you PAUSE the cycle, you can open the door,
provided:
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to Pause by pressing the Start/Pause
button. After you have closed the door, press the
Start/Pause button again.
• the washing machine is not in the heating phase;
• the level of the water is not high;
If all these requirements are met, the “Door lock” light
goes off.
11 “Delay start” button
Acoustic Signal
Before you start the programme, if you wish to
delay the start, press the Delay Start button
repeatedly, to select the desired delay. The relevant
light will illuminate.
At the end of a washing cycle and in case of
operating problems, an acoustic signal will sound.
You can deactivate the acoustic signal by pressing
the "Intensive" and the "Extra rinse" buttons
simultaneously for about 5 seconds.
The selected delay time value (up to 20 hours) will
appear on the display for about 3 seconds, then the
duration of the programme will appear again.
By pressing these buttons again the acoustic signal is
reactivated.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme information
Soak
Spin
This is a special programme for heavily soiled laundry.
The machine performs a soak for about 30 minutes at
30°C. Pour the detergent for the soak programme into
Separate long spin at the max speed for hand washed
cotton garments. The spin speed will automatically
assume the setting for cotton items. You can reduce
the speed by means of “Spin” button to adapt it to the
fabrics to be spun.
the compartment marked
.
At the end of the soak time the machine will stop
automatically with water left in the tub. The display
will show a flashing zero. The “Door lock” light is on.
Before starting a new washing phase, it is necessary to
empty the water by selecting the “Drain” programme.
30 Minute wash
This is a complete programme that can be combined
with the following options: “Spin” speed
reduction/None and “Delay start”.
To be used for laundry which is lightly soiled or which
needs freshening up.
This programme cannot be used for very delicate
fabrics as silk or wool.
Rinse
Max. load 2 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
With this programme it is possible to rinse and spin
garments which have been washed by hand. The
machine performs 3 rinses, followed by a final long spin
at the maximum speed.
Off = Reset / Switching the machine off
To reset a programme or to switch the machine off,
turn the selector dial to “Off”.
Important!
The spin speed will automatically assume the setting for
cotton items. If required, reduce the speed to the
desired level by pressing the "Spin" button.
Now a new programme can be selected.
Drain
To empty out the water of the last rinse in
programmes with the “Rinse hold” option or the
“Soak 30°” programme. First turn the programme
selector dial to “Off”, then select the “Drain”
programme and press the “Start/Pause” button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the washing machine
Before the first wash, we recommend that you pour 2
3.Measure out the fabric softener
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 90°C, without any
laundry in the machine, to remove any manufacturing
of
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
residue from the drum and tub. Pour 1/2 a measure of
detergent into the dispenser drawer and start the
machine.
WASHING 6 KG OF WHITE COTTON AT 90°C
Suppose you have 6 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.
SM003
Close the drawer gently.
1.Load the laundry
Open the door. Place the laundry in the drum, one
item at a time, shaking them out as much as possible.
Close the door.
4. Switch the machine on
Turn the selector dial to any programme to switch the
machine on. The Start/Pause light starts to flash and
the display shows the duration of the selected
programme.
To switch the appliance off turn it to “Off”.
30 Minute wash
Spin
Off
90°
Economy 60°
Start/Pause
Drain
60°
P0004
Rinse
Soak
Cold
Economy 40°
40°
30°
60°
o o l
30°
W
Economy 40°
40°
Hand wash
Delicates 30°
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
Delicates 40°
30°
the main wash compartment
.
If you wish to carry out the prewash, a soak programme
or a stain phase, pour detergent or stain remover into
5. Select the desired
the appropriate compartment marked
.
programme/temperature
Turn the selector dial to the desired position (Cottons
90° in this case).
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.
SM002
SM002
Important!
Do not use normal detergent for the “Stain” option,
always use a STAIN remover.
2.00
If your laundry needs a soak time, turn the programme
selector dial to “Soak 30” and then, before starting a
washing cycle, drain the water as described in the
“Soak” paragraph.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the spin speed or
“None” option
Press the “Spin” button repeatedly in order to select
the desired spin speed or the “None” option. The
relevant light will light up.
9. Select the “Delay start”
Before you start the programme, if you wish the
start to be delayed, press the “Delay Start” button
repeatedly, or keep it pressed, to select the desired
delay. The selected delay time value (up to 20 hours)
will appear on the display for 3 seconds, then the
duration of the programme will appear again.
1200
900
700
500
None
Wash time
t
y star
Dela
Spin
7. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option or the “Intensive”
option.
If your laundry has heavy stains and it is necessary to
prolong the washing time, select the “Stain” option.
The special detergent for stains (Stain remover) is
10. Start the programme
Press the “Start/Pause” button. The relevant green
light will stop flashing.
If you have chosen a delayed start, the washing machine
will begin the countdown.
loaded from the compartment marked
If your laundry is only lightly soiled, select the “Quick”
option.
The display will show the duration of the programme
or the selected delay.
.
If you wish the laundry to undergo an extra rinse,
select the “Extra Rinse” option.
If you do not want your laundry to be creased, select
the “Rinse hold” option to leave the fabrics in the
water of the last rinse.
11. How to change an option
or a programme during its
cycle
It is possible to change any option before the
programme carries it out. Before you make any change,
you must pause the washing machine by pressing the
“Start/Pause” button.
The relevant light illuminates.
Stain
Rinse hold
Changing a running programme is possible only by
resetting it.
Quick
e
Extra rinse
Intensiv
Prewash
Turn the programme selector dial to “Off” and then
to the new programme position. The washing water in
the tub will not empty out.
Start the new programme by pressing the
“Start/Pause” button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
12.How to interrupt a
programme
Press the “Start/Pause” button to interrupt the
programme which is running, the corresponding light
starts to flash. Press the button again to restart the
programme.
14. End of programme
At the end of the programme, the washing machine
stops automatically, the “Start/Pause” button light and
the “Door” light go off, the display shows a flashing
zero «0». It is possible to open the door.
If you had selected the “Rinse hold” option, the
“Rinse Hold” light and the “Door lock” light remain lit
to indicate that the door is locked and the water must
be drained.
13. How to open the door
during the cycle of a
programme
To drain or to spin see paragraph “Rinse hold” on
page 13.
You can open the door, after having set the washing
machine to Pause, provided the following conditions
exist:
Turn the programme selector dial to Reset “Off” to
switch the machine off.
Remove the laundry from the washing machine.
• the washing machine is not in the heating phase
beyond 55°C;
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
• the level of the water is not high;
If these requirements are met, when you pause the
washing machine, the “Door lock” light goes off and
the door can be opened.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Should it not be possible to open the door, and should
it be absolutely necessary to do so, switch the machine
off by turning the selector dial to “Off”.
Leave the door ajar in order to air the washing
machine.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of
the water in the washing machine!
When you close the door to restart the programme
turn the dial to the previous programme repeating the
options previously selected and press Start/Pause
button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints & tips on washing
●
Do NOT overload the machine. Weigh the laundry the
When washing fabrics requiring different wash
first few times you use the appliance.
temperatures together, always select the lowest
temperature.
The average weights of the most common items are
listed below as a guide:
●
●
●
White items should not be washed with coloured
items.
1000g = 1 kg
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Use a good quality detergent suitable for automatic
washing machines.
Pillow case
Tablecloth
●
●
Use the correct quantities of detergent.
Serviette
For wool, use gentle detergent only in small
quantities.
Tea towel
70-120 g
●
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
Man’s shirt
Apron
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
●
Load the laundry loosely alternating large items with
small ones.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
Avoid washing unhemmed or torn items as they
may unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
●
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash care symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
60
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
50
Cotton/Acrylic Mix.
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
40
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
TUMBLE DRYING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash
programme, place the detergent into the correct
compartment in the dispenser drawer, after the
prewash has finished.
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing
it in gently. This is particularly important if you are using
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme/
Fabrics
Available options
Type of laundry
Load
Energy
kWh
Water
litres
temperature
Spin reduction/None
Prewash, Intensive,
Rinse hold, Stain,
Extra rinse, Quick
Sheets, household
linen, towels,
tablecloths
90°
White
6Kg
2.0
2.2
61
61
cotton
Cottons
90°
Cottons
+
Sheets, household
linen, towels,
tablecloths
Spin reduction/None
Prewash, Stain,
Rinse hold, Extra rinse
White
cotton
6 Kg
6 Kg
INTENSIVE
option selected
Economy
60°
Sheets, household
linen, towels,
tablecloths
Spin reduction/None
Prewash, Stain,
Rinse hold, Extra rinse,
White
cotton
1.02
1.3
49
58
Cottons
Fast coloured and
non-fast items, for
example hand towels,
sheets, underwear,
tablecloths, shirts
60° -
40° - 30°
Spin reduction/None
Prewash, Intensive
Stain**, Rinse hold
Extra rinse, Quick
White and
coloured
cotton
6 Kg
Cottons
60°- 40°- 30°
Cottons +
INTENSIVE
option selected
Fast coloured items,
as hand towels,
White and
coloured
cotton
Spin reduction/None
Prewash, Stain**
6 Kg
6 Kg
3 Kg
1.3
1.1
1.0
58
49
55
sheets, underwear,
tablecloths, shirts
Rinse hold, Extra rinse
Economy
40°
Cottons
Coloured items, for
example underwear,
shirts, blouses
Spin reduction/None
Prewash, Stain,
R. hold, Extra rinse
Coloured
cotton
Spin reduction/None
Prewash, Stain**
Rinse hold,
60° -
40° - 30°
Shirts, blouses,
underwear, mixed
fabrics
Synthetics
Synthetics
Delicates
Synthetics
Extra rinse, Quick
Economy
40°
Synthetics
Shirts, blouses,
underwear, mixed
fabrics
Spin reduction/None
Prewash, Stain,
R. hold, Extra rinse
52
60
0.6
3 Kg
3 Kg
Acrylic, viscose,
polyester items,
curtains
Spin reduction/None
Prewash, Stain**,
R. hold, Extra rinse, Quick
40° - 30°
Delicates
0.55
Garments bearing the
“ Pure new wool,
non-shrink, machine
washable” or “Hand
wash” label
30°
Hand wash
Wool
(hand wash)
Spin reduction/
None, Rinse hold
0.4
55
2 kg
30° - Cold
Wool
The “Economy Cottons 60° ” is the reference programme for the data entered in the energy label, in compliance
with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
** Only at a temperature of 40°C or higher.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme
description
Load
Programme
Available options
Energy
Water
litres
kWh
Soak for 30 minutes
at 30°C
6 Kg
0.4
21
Soak
3 rinses
Long spin at max.
speed
Spin reduction/
None, Rinse hold
Extra rinse
Rinse
6 Kg
6 Kg
0.1
-
42
Drain
For emptying out the last
rinse of the programmes
with option “Rinse
hold” and programme
“Soak”
-
-
Water draining
-
Drain and long spin at
max. speed**
-
Spin reduction
6Kg
Spin
30 Minute wash
Short cycle for lightly
soiled fabrics
Wash at 30°C
2 rinses
Short spin
Spin reduction/
None
2 Kg
0.3
55
For cancelling the
programme which is
running or to switch
the machine off
-
-
-
Off / (Reset)
** You can reduce the spin speed by means of the relevant button to adapt it to the fabrics to be spun.
For the duration of the programmes, please refer to the display on the control panel.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
You must DISCONNECT the appliance from the
electricity supply, before you can carry out any
cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
SM004
SM005
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance wash
With the use of low temperature washes it is possible
to get a build up of residues inside the drum.
We recommend that a maintenance wash be
performed on a regular basis.
P0038
Cleaning the pump
The pump should be inspected if
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
• The machine does not empty and/or spin
• The machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
Proceed as follows:
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to
remove any traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed.
P1114
• Place a container close to the pump to collect any
spillage.
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
• When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
Tighten up the inlet hose.
P1090
P1115
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Remove any objects from the pump impeller by
rotating it.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
●
Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
• Put the cap back on the emergency emptying hose
and place the latter back in its seat.
Important!
Every time you drain the water through the emergency
emptying hose you must pour 2 litres of water into the
main wash compartment of the detergent drawer and
then run the drain programme. This will activate the
ECO valve.
P1117
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
• Screw the pump cover fully in.
• Close the pump door.
• Pull out the plug from the power socket;
• Close the water tap;
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the
pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure it
is securely retightened so as to stop leaks and young
children being able to remove it.
• If necessary, wait until the water has cooled down;
• Open the pump door;
• Place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
Cleaning the water inlet filter
• Clean the pump if necessary as previously described;
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
• Replace the emergency emptying hose in its seat after
having plugged it;
• Screw the pump cover again and close the door.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Please carry out the following checks before contacting your local Service Force agent.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that the red Start/Pause pilot light flashes, one of the following alarm
codes appears on the display and some acoustic signals sound to indicate that the machine is not working:
E 10
-
-
-
: problem with the water supply
: problem with water draining
: door open
E 2 0
E 40
Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
The machine does not start
Solution
●
E 40
The door has not been closed. (
)
●
The plug is not properly inserted in the power socket.
●
●
●
●
●
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The «Start/Pause» button has not been pressed.
The «Delay start» option has been selected.
The «Child lock» option has been enabled.
●
●
●
●
The machine does not fill
E 10
The water tap is closed. (
The filter in the inlet hose is blocked. (
The inlet hose may be squashed or kinked. (
)
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
●
●
The machine does not empty
and/or does not spin
E 2 0
The drain hose may be squashed or kinked. (
The “rinse hold” option has been selected.
)
E 2 0
The drain pump may be blocked. (
)
The “None” option has been selected
The drainage system pipes are blocked.
The programme “Soak”, which ends with water left in the tub, has
been selected .
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates
too much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see
if it is damp.
The drain hose may be damaged or not securely positioned.
The cap on the emergency emptying hose has not been replaced after
cleaning the filter.
●
●
●
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
●
The energy save system is enabled. Press the Start/Pause button to
switch the appliance on.
The green Start/Pause light
flashes and the display seems off
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Solution
●
The machine vibrates when
spinning
The internal packing has not been removed.
●
●
●
●
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
●
●
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water.
The drum is turning.
In any case the door can be opened only when the “Door lock”
light has gone out.
●
The electronic balance control device has cut in because the laundry is
Spinning starts late or the
machine does not spin
not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before
the unbalance disappears and normal spinning can resume. If, after few
minutes, the laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the load manually and
select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor
ensures a softer start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
Your washing machine is covered by a 3 year
parts and labour guarantee (see separate details
given at point of sale). Please retain your
purchase receipt safely for the service .
Repairs - After Sales Service
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
0870 01 07887
They will give you details for your local Service Force
Centre. Service Force are the appointed national
appliance repair agents responsible for warranty repairs
to this appliance.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
P
r o
o
d
. . . . . . . . . .
M
d
.
N
.
o
. . . . . . . . . . .
.
S
e r
.
N
o
.
.
.
.
.
.
.
.
.
.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
Please note that a valid purchase receipt is
required for in-guarantee service calls.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
Spare parts
Always insist on genuine spare parts.
3. Clear and concise details of fault
4. The purchase date and found on your receipt.
An authorised service engineer should service this
product, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local John Lewis Branch.
5. The model and serial number of the appliance
(found on the rating plate - see picture)
So that you always have these numbers to hand, we
recommend you to make a note of them here.
Model................................................................................................
PNC...................................................................................................
SN.......................................................................................................
.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
132 972 411
19/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|