John Lewis Washer Dryer JLBIWM 1402 User Manual

JLBIWM 1402  
Built-in 1400 spin washing machine  
Instruction manual  
Delay start  
Wash time  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
1400  
900  
Drain  
60°  
Rinse  
Economy 40°  
700  
Rinse hold  
Soak  
40°  
500  
Door lock  
Cold  
30°  
None  
Stain  
30°  
60°  
Economy 40°  
40°  
Spin  
Option  
Prewash  
Quick  
Extra rinse  
Start/Pause  
Hand wash  
Delicates 30°  
Delicates 40°  
30°  
Child lock  
JLBIWM1402  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
Environmental information  
After unpacking please dispose of packaging with  
due regard to safety and the environment.  
For information on maintenance and cleaning your  
washing machine see the relevant chapter of this  
instruction manual.  
Materials marked with the symbol  
recyclable.  
are  
Service  
This product should only be repaired or serviced by  
Check with your local Council to see if there are  
facilities in your area for re-cycling this appliance.  
an authorised Service Engineer and only genuine  
approved spare parts should be used.  
WARNING:  
A cut off plug inserted into a 13 amp  
socket is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
Normally soiled laundry may be washed without  
The symbol  
on the product or on its packaging  
prewashing in order to save detergent, water and  
time (the environment is protected too!).  
indicates that this product may not be treated as  
household waste. Instead it should be taken to the  
appropriate collection point for the recycling of  
electrical and electronic equipment. By ensuring this  
product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product.  
For more detailed information about recycling of  
this product, please contact your local council, your  
household waste disposal service or the shop  
where you purchased the product.  
The machine works more economically if it is fully  
loaded.  
With adequate pre-treatment, stains and limited  
soiling can be removed; the laundry can then be  
washed at a lower temperature.  
Measure out detergent according to the water  
hardness, the degree of soiling and the quantity of  
laundry being washed.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
For the User  
For the Installer  
Important Safety Information  
Installation  
Child safety  
2-3  
2
Maintenance and Cleaning  
Descaling  
After each wash  
16-17  
16  
2
16  
Maintenance Wash  
External cleaning  
16  
16  
16  
16  
Description of the Appliance  
Detergent dispenser drawer  
Child safety feature  
5
5
5
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the pump  
Cleaning the water inlet filter  
The dangers of freezing  
Emergency emptying out  
The Control Panel  
Before the First use  
Using the washing machine  
Load the laundry  
6-8  
9
16-17  
17  
17  
17  
9
9
Measure out the detergent  
Measure out the fabric softener  
Switch the machine on  
Select the desired programme/temperature  
Select the spin speed or the “None” option  
Select the desired options  
Select the “Delay start”  
Start the programme  
How to change an option or a programme  
during its cycle  
How to interrupt a programme  
How to open the door during the cycle of  
a programme  
End of programme  
Programme information  
9
9
9
10  
10  
10  
10  
10  
Something Not Working  
Installation  
Technical Specifications  
Unpacking  
Positioning  
Installation on a suspended floor  
Plumbing in  
Water inlet  
Water drainage  
Levelling  
18-19  
20  
20  
21  
21  
21  
21  
22  
22  
23  
23  
24  
24  
25  
10  
10  
In the interest of the environment  
Electrical connection  
Permanent connection  
Building-in  
10  
11  
11  
Hints & Tips on Washing  
Wash Care Symbols  
12  
13  
Repairs - After Sales Service  
27  
Washing Programmes  
14-15  
Guide to use the instruction manual  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
1 Detergent dispenser drawer  
2 Control panel  
3 Door handle  
Delay start  
Wash time  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
1400  
900  
Drain  
60°  
Rinse  
Economy 40°  
700  
Rinse hold  
4 Rating plate  
5 Filter  
Soak  
40°  
500  
Door lock  
Cold  
30°  
None  
Stain  
30°  
60°  
Economy 40°  
40°  
Spin  
Option  
Prewash  
Quick  
Extra rinse  
Start/Pause  
Hand wash  
Delicates 30°  
Delicates 40°  
30°  
Child lock  
JLBIWM1402  
6 Adjustable feet  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
Child safety feature  
This machine incorporates a special child safety feature  
to prevent small children from being trapped inside the  
machine.  
To activate this device, rotate the button (without  
pressing it) inside the door clockwise until the groove is  
horizontal. If necessary use a coin. This prevents the  
door from being closed.  
P1131  
To disable this device and close the door, rotate the  
button anti-clockwise until the groove is vertical.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The control panel  
Delay start  
Wash time  
30 Minute wash  
Off  
90°  
Spin  
Economy 60°  
1400  
900  
Drain  
60°  
Rinse  
Economy 40°  
700  
Rinse hold  
Soak  
40°  
500  
Door lock  
Cold  
30°  
None  
Stain  
30°  
60°  
Economy 40°  
40°  
Spin  
Option  
Prewash  
Quick  
Extra rinse  
Start/Pause  
Hand wash  
Delicates 30°  
Delicates 40°  
30°  
Child lock  
1
2 3 4 5 6 7 8 9 10  
your laundry to be spun at a speed different from the  
one proposed by the washing machine. The relevant  
light will light up.  
1 Programme selector dial  
The programme selector dial is divided into the  
following sections:  
Spin speed  
Cottons,  
• Synthetics,  
• Delicates  
The following speeds are available for the different  
fabrics:  
• Cottons, linen:  
500/700/900 max 1400 r.p.m. ;  
Wool Hand washing  
/
• Special programmes from “Soak” to “30 Minute  
wash”  
• Synthetics and Wool/Hand wash:  
500/700 max 900 r.p.m.;  
• Reset/Off programme Off  
The selector dial can be  
turned either clockwise  
or anticlockwise.  
• Delicates and 30 Minute wash :  
500 max 700 r.p.m.  
Position “None”  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
Drain  
60°  
By selecting the option “None” all the spinning phases  
are cancelled and the last rinse water is drained.  
If you select this option with programmes for cotton,  
synthetics and delicates, the machine will perform  
some extra rinses.  
Rinse  
Economy 40°  
Soak  
40°  
Cold  
30°  
Economy” position  
corresponds to an  
ENERGY SAVING  
programme and “Cold”  
to a cold wash.  
30°  
60°  
Economy 40°  
40°  
Hand wash  
Delicates 30°  
Delicates 40°  
30°  
Before setting the dial to  
Programme options buttons  
any position ensure that the machine is turned to the  
Depending on the programme, different options can be  
selected together. These must be selected after  
choosing the desired programme and before  
depressing the “Start/Pause” button.  
Off” position.  
Important! At the end of the programme the  
selector dial must be turned to position “Off,  
to switch the machine off.  
When these buttons are pressed, the corresponding  
pilot lights illuminate. When they are pressed again, the  
pilot lights go out.  
Attention!  
If you turn the programme selector dial to another  
programme when the machine is working, the red  
Start/Pause pilot light will flash 3 times and the  
message Err is displayed on the display to indicate a  
wrong selection. The machine will not perform the  
new selected programme.  
If an option which is not compatible with the set  
wash programme is selected, the red Start/Pause  
light flashes 3 times and the message Err is  
displayed for about 2 seconds.  
2 Spin button  
Press this button repeatedly to change the spin speed  
or to select position “None” (no spin), if you want  
3 Option button  
Press this button repeatedly, to select only one of the  
following options:  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rinse hold: when you choose this option, the  
machine will not drain the water of the last rinse, this  
will ensure the minimum of creasing to laundry.  
6 Extra rinse button  
This option can be selected with all programmes,  
except the Wool programmes and “30 Minute wash”.  
The machine performs some additional rinses.  
This option is recommended for people who are  
allergic to detergents, and areas where the water is  
very soft.  
At the end of the cycle, the lights corresponding to the  
options “Rinse hold” and the “Door lock” are on,  
the “Start/Pause” button light goes out and the  
display shows a flashing «0».  
The door cannot be opened because the water must  
be drained.  
To empty out water there are 2 possibilities:  
- Select Drain programme and press the  
Start/Pause” button : the water is emptied out  
without spinning.  
- Select Spin programme. Select the spin speed by  
pressing the relevant button and then press the  
Start/Pause button. The water is emptied out and  
the laundry is spun at the selected spin speed.  
7 Display (Wash time)  
The following pieces of information are shown on the  
display:  
Duration of washing programme in hours and  
minutes, after you have selected a programme.  
While the programme is  
running (after you have  
pressed the Start/Pause  
button), the displayed time  
Attention!  
2.00  
Before selecting Drain programme or Spin  
programme the selector dial must first be turned to the  
«Off» position.  
value decreases by one unit  
every minute.  
The washing machine has completed the  
programme: this is indicated by a flashing zero.  
The “Door lock” pilot light and the Start/Pause light  
go out and the door can be opened.  
STAIN: Select this button if you wish to add a stain  
phase to the washing of heavily soiled laundry. Pour a  
stain removing detergent into the compartment  
marked  
The washing machine has stopped with water  
in the tub, at the end of the “Soak” or of a  
programme with the “Rinse hold” option: this is  
indicated by a flashing zero. The Start/Pause light  
goes out but the “Door lock” pilot light is still on.  
The door cannot be opened.  
.
This function is available for programmes with a  
temperature of 40° or higher.  
The washing time will be prolonged by a few minutes.  
For the compatibility of this option with the washing  
cycles, refer to the Chapter «Washing programmes»  
If your laundry is not  
removed within 10 minutes  
after the programme has  
finished, all pilot lights and  
the display switch off and  
4 Prewash button  
Select this option if you wish your laundry to be  
prewashed before the main wash.  
The prewash ends with a short spin in programmes for  
cotton and synthetic fabrics, whereas in the programme  
for delicate fabrics the water is only drained. This  
option can be selected for heavily soiled laundry.  
0
the energy saving system  
will be enabled. Only the green Start/Pause light flashes  
to indicate that the appliance has to be switched off.  
Delay start, a time value indicated in hours and  
selected by means of the relevant button.  
5 Quick button  
The delay time (20 hours  
max) is displayed for a few  
seconds, then the duration  
of the selected programme  
reappears.  
This option can be used for lightly soiled garments in  
order to obtain a good washing programme in a short  
time. The washing time will be reduced according to the  
type of fabric and the selected temperature.  
We recommend that you reduce the load to 3 kg for  
Cottons and 1.5 Kg for Synthetics and Delicates.  
For the compatibility of this option with the washing  
cycles, refer to the Chapter «Washing programmes»  
After you have pressed the  
Start/Pause button, the countdown is updated every  
hour, and, for the last hour, every minute.  
An incorrect option selection has been made:  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
This is indicated by the  
message Err for about 2  
seconds when a function  
incompatible with the  
current programme is  
selected.  
programme and before you press the Start/Pause  
button.  
• Select the programme and the required options.  
• Select the delay start.  
• Press Start/Pause button: the machine starts its  
hourly countdown.  
An alarm code  
The programme will start after the selected delay  
has expired.  
It indicates a fault with the  
machine (see the relevant  
chapter).  
Cancelling the delayed start after having  
started the programme  
E20  
• Press Start/Pause button.  
• Press “Delay start” button once until the symbol  
0’  
« » is displayed.  
• Press “Start/Pause button again.  
8 Start/Pause button  
The Delay Start cannot be selected with “Drain”  
programme.  
To start the selected programme, press the  
Start/Pause button; the green pilot light stops  
flashing.  
Important!  
If you have selected a delay time, the countdown will  
begin and will be shown on the display.  
The door will be locked throughout the delay time. If  
you wish to add laundry in the machine during the  
delay time you must first set the washing machine to  
Pause by pressing the Start/Pause button. After you  
have closed the door, press the Start/Pause button  
again.  
To interrupt a programme which is running, press  
the Start/Pause button: the green pilot light starts  
to flash.  
To restart the programme from the point at which  
it was interrupted, press the Start/Pause button  
again.  
If an incorrect option is selected, an integrated red  
pilot light of the Start/ Pause button flashes 3 times  
the message Err is displayed for a few seconds.  
10 Door lock light  
This pilot light illuminates to indicate that the appliance  
starts operating and the door is locked.  
Important! You must set the washing machine to  
Pause before you make any change in the programme  
in progress.  
Door lock  
Start/Pause  
It stays on during the  
whole programme.  
When this light goes out,  
the door can be opened.  
9 Delay start button  
The wash programme can be delayed from 30 min -  
60 min - 90 min, 2 hours and then by 1 hour up to  
a maximum of 20 hours by means of this button.  
This pilot light indicates if  
the door can be opened:  
Before you start the programme, if you wish to  
delay the start, press the Delay Start button  
repeatedly, to select the desired delay.  
• Light on: the door cannot be opened.  
The appliance is running.  
The selected delay time value (up to 20 hours) will  
appear on the display for a few seconds, then the  
duration of the programme will appear again.  
• Light off: the door can be opened.  
The washing programme is finished.  
When you PAUSE the cycle, it becomes possible to  
open the door, provided:  
You can cancel the delay time at any moment,  
before you press the Start/Pause button.  
• The washing machine is not in the heating phase;  
• The level of the water is not high;  
Selecting the delayed start  
You must select this option after you have set the  
If all these requirements are met, the “Door lock” light  
goes off.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
First use  
approx 6 seconds until the icon  
disappears from) the display.  
appears on (or  
Child lock  
This function allows you to leave the appliance  
unsupervised and not to worry that children might  
be injured by or cause damage to the appliance.  
This function remains enabled also when the  
washing machine is not working.  
Acoustic signal  
The machine is provided with an acoustic device,  
which sounds in the following cases:  
There are two different ways to set this option:  
At the end of the cycle  
If there is a fault  
1
2
If enabled before the «Start/Pause» button is  
pressed, it prevents the machine from being  
started.  
By pressing “Prewash” and the “Quick” buttons  
simultaneously for about 6 seconds, the acoustic  
signal is deactivated (except if there is a fault).  
If enabled after pressing the «Start/Pause»  
button, it prevents any changes being made  
to the programmes or options selected.  
By pressing these 2 buttons again, the acoustic signal  
is reactivated.  
To enable (or disable) this function, press the  
«Spin» and «Option» buttons simultaneously for  
Using the washing machine  
If you wish to carry out the prewash, a soak programme  
or a stain phase, pour detergent or stain remover into  
the appropriate compartment marked  
Before the first wash, run a cotton cycle at 90°C,  
without any laundry in the machine, to remove any  
manufacturing residue from the drum and tub. Pour 1/2  
a measure of detergent into the main compartment of  
the dispenser drawer and start the machine.  
.
Important!  
Do not use normal  
detergent for the “Stain”  
option, always use a  
STAIN remover.  
WASHING 6 KG OF WHITE COTTON AT 90°C  
Suppose you have 6 kg of laundry to wash. It is white  
cotton and is suitable for high temperature washing.  
Load the laundry  
Open the door.  
P0005  
Place the laundry in the  
drum, one item at a time,  
shaking them out as much  
as possible. Close the  
door.  
Measure out the fabric softener  
If required, pour fabric  
softener into the  
compartment marked  
without exceeding the  
«MAX» mark.  
,
Close the drawer gently.  
P0004  
Measure out the detergent  
Pull out the dispenser drawer until it stops. Measure  
out the amount of detergent required and pour it into  
P0006  
Switch the machine on  
Turn the selector dial to any programme to switch the  
the main wash compartment  
.
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
machine on. The Start/Pause light starts to flash and  
the display shows the duration of the selected  
programme.  
If you wish the laundry to undergo an extra rinse,  
select the “Extra Rinse” option.  
If you do not want your laundry to be creased, select  
the “Rinse hold” option to leave the fabrics in the  
water of the last rinse. The relevant light illuminates.  
To switch the appliance off turn it to “Off.  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
Select the “Delay start”  
Before you start the programme, if you wish the  
start to be delayed, press the “Delay Start” button  
repeatedly, or keep it pressed, to select the desired delay.  
Drain  
60°  
Rinse  
Economy 40°  
Soak  
40°  
Cold  
30°  
30°  
60°  
Economy 40°  
40°  
2.05  
Hand wash  
Delicates 30°  
Delicates 40°  
30°  
The selected delay time  
value (up to 20 hours)  
will appear on the display  
for a few seconds, then  
the duration of the  
programme will appear  
again.  
Select the desired  
Delay start  
Wash time  
programme/temperature  
Turn the selector dial to the desired position (Cottons  
90° in this case). The display will show the duration of  
the selected programme, calculated on the basis of the  
maximum load for each type of fabric. The  
Start/Pause button light will start flashing.  
If your laundry needs a soak time, turn the programme  
selector dial to “Soak” and then, before starting a  
washing cycle, drain the water as described in the  
Soak” paragraph.  
Start the programme  
Press the “Start/Pause” button. The relevant green  
light will stop flashing. If you have chosen a delayed  
start, the washing machine will begin the countdown.  
The display will show the duration of the programme  
or the selected delay.  
Select the spin speed or  
“None” option  
How to change an option or a  
programme during its cycle  
Press this button repeatedly in order to select the  
desired spin speed or the “None” option.  
The relevant light will light  
It is possible to change some options before the  
programme carries it out. Before you make any change,  
you must pause the washing machine by pressing the  
Start/Pause” button.  
1400  
up.  
900  
700  
500  
None  
Spin  
Changing a running programme is possible only by  
resetting it. Turn the programme selector dial to  
«Off» and then to the new programme position.  
Start the new programme by depressing the  
Start/Pause” button. The washing water in the tub  
will not be emptied out.  
Select the desired options  
If your laundry has heavy stains and it is necessary to  
prolong the washing time, select the “Stain” option.  
The special detergent for  
How to interrupt a programme  
Press the “Start/Pause” button to interrupt a  
programme which is running, the corresponding light  
starts to flash. Press it again to restart the programme.  
stains (Stain remover) is  
Rinse hold  
loaded from the compart-  
ment marked  
.
Stain  
How to open the door during  
the cycle of a programme  
If your laundry is very  
dirty, it may be advisable  
to select the “Prewash”  
option.  
Option  
Prewash  
Quick  
You can open the door, after having set the washing  
machine to Pause, provided the following conditions  
exist:  
If your laundry is only  
lightly soiled, select the “Quick” option.  
• The washing machine is not in the heating phase  
beyond 55°C;  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The level of the water is not high;  
will show a flashing zero. The “Door lock” light is on.  
Before starting a new washing phase, it is necessary to  
empty the water by selecting the “Drain” programme.  
If these requirements are met, when you pause the  
washing machine, the “Door lock” light goes off and  
the door can be opened.  
This programme cannot be used for very delicate  
Should it not be possible to open the door, and should  
it be absolutely necessary to do so, switch the machine  
off by turning the selector dial to “Off”.  
fabrics as silk or wool.  
Rinse  
After a few minutes, you can open the door.  
With this programme it is possible to rinse and spin the  
cotton garments which have been washed by hand. The  
machine performs 3 rinses, followed by a final long spin  
at the maximum speed.  
Pay attention to the level and temperature of  
the water in the washing machine!  
When you close the door to restart the programme  
turn the dial to the previous programme repeating the  
options previously selected and press Start/Pause  
button.  
Important!  
The spin speed will automatically assume the setting for  
cotton items. If required, reduce the speed to the  
desired level by pressing the "Spin" button.  
End of programme  
Drain  
At the end of the programme, the washing machine  
stops automatically, the “Start/Pause” button light and  
the “Door Lock” light go off, the display shows a  
flashing zero «0». It is now possible to open the door.  
For emptying out the water of the last rinse in  
programmes with the “Rinse hold” option or of  
Soak” programme. First turn the programme selector  
dial to “Off”, then select the “Drain” programme and  
press the “Start/Pause” button.  
If you had selected the “Rinse hold” option, the  
Rinse Hold” light and the “Door lock” light remain lit  
to indicate that the door is locked and the water must  
be drained.  
Spin  
Separate long spin at the max speed for hand washed  
cotton garments. The spin speed will automatically  
assume the setting for cotton items. You can reduce  
the speed by means of “Spin” button to adapt it to the  
fabrics to be spun.  
To drain or to spin see paragraph “Rinse hold” on  
page 14. Turn the programme selector dial to Reset  
«Off» to switch the machine off.  
Remove the laundry from the washing machine.  
Check whether the drum is completely empty, by  
rotating it with your hand. The purpose of this is to  
prevent any items of laundry from remaining  
accidentally in the drum, where they might get damaged  
in a subsequent wash (e.g. by shrinking) or bleed colour  
into another load of laundry.  
30 Minute wash  
This is a complete programme that can be combined  
with the following options: Spin” speed  
reduction/None and “Delay start”.  
To be used for laundry which is lightly soiled or which  
needs freshening up.  
Max. load 2 kg.  
Washing temperature 30 C.  
Programme duration 30 minutes.  
Final spin speed 700 rpm.  
We advise you to close the water supply tap and  
disconnect the plug from the socket.  
Leave the door ajar in order to air the washing  
machine.  
Off = Reset / Switching the machine off  
To reset a programme or to switch the machine off,  
turn the selector dial to “Off”.  
Programme information  
Soak  
A new programme can now be selected.  
This is a special programme for heavily soiled laundry.  
The machine performs a soak of about 40 minutes at  
30°C. Pour the detergent for the soak programme into  
the compartment marked  
.
At the end of the soak time the machine will stop  
automatically with water left in the tub. The display  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hints & tips on washing  
Do NOT overload the machine. Weigh the laundry the  
When washing fabrics requiring different wash  
first few times you use the appliance.  
temperatures together, always select the lowest  
temperature.  
The average weights of the most common items are  
listed below as a guide:  
White items should not be washed with coloured  
items.  
1000g = 1 kg  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Use a good quality detergent suitable for automatic  
washing machines.  
Pillow case  
Tablecloth  
Use the correct quantities of detergent.  
Serviette  
For wool, use gentle detergent only in small  
quantities.  
Tea towel  
70-120 g  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Some stains such as fruit, wine, grass, rust etc. are  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
Man’s shirt  
Apron  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Load the laundry loosely alternating large items with  
small ones.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Once you have finished using the machine, you are  
advised to unplug it and turn off the water tap.  
Avoid washing unhemmed or torn items as they  
may unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash care symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
40  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
TUMBLE DRYING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash  
programme, place the detergent into the correct  
compartment in the dispenser drawer, after the  
prewash has finished.  
Important notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
Once the dispenser has been filled, close it by pushing  
it in gently. This is particularly important if you are using  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Consumptions*  
Programme/  
Available options  
Fabrics  
Type of laundry  
Load  
Energy  
kWh  
Water  
litres  
temperature  
Spin reduction/None  
Prewash, Rinse hold,  
Stain, Extra rinse,  
Quick***  
90°  
White  
Sheets, household linen,  
towels, tablecloths  
6 Kg  
2.1  
57  
42  
cotton  
Cottons  
Economy  
60°  
Spin reduction/None  
Prewash, Stain,  
Rinse hold,  
White  
cotton  
Sheets, household linen,  
towels, tablecloths  
6 Kg  
6 Kg  
1.02  
Cottons  
Extra rinse  
Fast coloured and non-  
fast items, for example  
hand towels, sheets,  
underwear, tablecloths,  
shirts  
Spin reduction/None  
Prewash, Stain**,  
Rinse hold  
60° -  
40° - 30°  
White and  
coloured  
cotton  
1.2  
53  
Cottons  
Extra rinse, Quick***  
Spin reduction/None  
Prewash, Stain,  
Economy  
40°  
Cottons  
Coloured items, for  
example underwear,  
shirts, blouses  
Coloured  
cotton  
42  
44  
6 Kg  
3 Kg  
0.9  
0.9  
R. hold, Extra rinse  
Spin reduction/None  
Prewash, Stain**  
Rinse hold,  
60° -  
40° - 30°  
Shirts, blouses,  
underwear, mixed  
fabrics  
Synthetics  
Synthetics  
Delicates  
Synthetics  
Extra rinse, Quick***  
Economy  
40°  
Synthetics  
Shirts, blouses,  
underwear, mixed  
fabrics  
Spin reduction/None  
Prewash, Stain,  
R. hold, Extra rinse  
0.4  
37  
56  
3 Kg  
3 Kg  
Spin reduction/None  
Prewash, Stain**,  
R. hold, Extra rinse,  
Quick***  
Acrylic, viscose,  
polyester items,  
curtains  
40° - 30°  
Delicates  
0.55  
Garments bearing the “  
Pure new wool, non-  
shrink, machine  
washable” or “Hand  
wash” label  
Hand wash  
Wool  
30°  
(Hand wash)  
Spin reduction/  
None, Rinse hold  
0.25  
58  
2 kg  
30° - Cold  
Wool  
The “Economy Cottons 60° ” with a load of 6 kg, is the reference programme for the data entered in the energy  
label, in compliance with EEC 92/75 standards.  
*
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type  
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest  
temperature provided for each programme.  
** Only at a temperature of 40°C or higher.  
*** If you select the QUICK option by pressing the relevant button, we recommend that you reduce the maximum  
load as follows: 3 kg for Cottons and 1.5 Kg for Synthetics and Delicates. Full loading is possible however with  
somewhat reduced cleaning results.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Consumptions*  
Programme  
Load  
Programme  
Available options  
Energy  
Water  
litres  
description  
kWh  
Soak for 40 minutes  
at 30°C  
6 Kg  
0.2  
29  
Soak  
3 rinses  
Long spin at max.  
speed  
Spin reduction/  
None, Rinse hold  
Extra rinse  
Rinse  
6 Kg  
6 Kg  
0.1  
-
39  
Drain  
For emptying out the last  
rinse of the programmes  
with option “Rinse  
hold” and programme  
Soak”  
-
Water draining  
-
Drain and long spin at  
max. speed**  
6 Kg  
-
Spin reduction  
Spin  
-
43  
-
30 Minute wash  
Short cycle for lightly  
soiled fabrics  
Wash at 30°C  
2 rinses  
Short spin  
Spin reduction/  
None  
2 Kg  
0.2  
For cancelling the  
programme which is  
running or to switch  
the machine off  
-
-
Off / (Reset)  
** You can reduce the spin speed by pressing the relevant button to adapt it to the fabrics to be spun.  
For the duration of the programmes, please refer to the display on the control panel.  
IMPORTANT  
If using liquid detergents, a programme without PREWASH must be selected.  
WOOL PROGRAMME  
Note: A single or bulky item may cause imbalance.If the appliance doesn’t perform the final spin phase, add  
more items, redistribute the load manually and then select the spinning programme.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
You must DISCONNECT the appliance from the  
electricity supply, before you can carry out any  
cleaning or maintenance work.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
machine. Do this separately from any laundry washing,  
P0009  
P0010  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning the drawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maintenance wash  
With the use of low temperature washes it is possible  
to get a build up of residues inside the drum.  
We recommend that a maintenance wash be  
performed on a regular basis.  
P0038  
Cleaning the pump  
The pump should be inspected if  
To run a maintenance wash:  
The drum should be empty of laundry.  
Select the hottest cotton wash programme.  
• The machine does not empty and/or spin  
• The machine makes an unusual noise during draining  
due to objects such as safety pins, coins etc. blocking  
the pump.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
Proceed as follows:  
External cleaning  
Clean the exterior cabinet of the appliance with soap  
and water only, and then dry thoroughly.  
• Disconnect the appliance.  
• If necessary wait until the water has cooled down.  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
A
B
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to  
remove any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
BI0002  
BI0001  
• Place a container close to the pump (A) to collect  
any spillage.  
• Pull out the emergency emptying hose (B), place it in  
the container and remove its cap.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• When no more water comes out, unscrew the pump  
cover and remove it. Always keep a rag nearby to dry  
up spillage of water when removing the cover.  
Turn off the water tap. Unscrew the water inlet hose.  
Clean the filter using a hard bristle brush.  
Tighten up the inlet hose.  
BI0003  
P1090  
Remove any objects from the pump impeller by  
rotating it.  
The dangers of freezing  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Turn off the water tap.  
Unscrew the inlet hose.  
Place the end of the emergency emptying hose and  
that of the inlet hose in a bowl placed on the floor  
and let water drain out.  
BI0005  
Screw the water inlet hose back on and reposition  
the emergency emptying hose after having put the  
cap on again.  
• Refit the cap on the emergency emptying hose and  
place the latter back in its seat.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
Emergency emptying out  
If the water is not discharged, proceed as follows to  
empty out the machine:  
• Pull out the plug from the power socket;  
• Close the water tap;  
• If necessary, wait until the water has cooled down;  
BI0006  
• Screw the pump cover fully in.  
• Place a bowl on the floor and place the end of the  
emergency emptying hose into the bowl. Remove its  
cap. The water should drain by gravity into the bowl.  
When the bowl is full, refit the cap on the hose.  
Empty the bowl. Repeat the procedure until water  
stops flowing out;  
Warning  
When the appliance is in use and depending on the  
programme selected there can be hot water in the  
pump. Never remove the pump cover during a wash  
cycle, always wait until the appliance has finished the  
cycle, and is empty. When replacing the cover, ensure it  
is securely retightened so as to stop leaks and young  
children being able to remove it.  
• Clean the pump if necessary as previously described;  
• Replace the emergency emptying hose in its seat after  
having plugged it;  
• Screw the pump cover again.  
Cleaning the water inlet filter  
If your water is very hard or contains traces of lime  
deposit, the water inlet filter may become clogged.  
It is therefore a good idea to clean it from time to time.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something not working  
Please carry out the following checks before contacting your local Service Force agent.  
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by  
incorrect use or installation, a charge will be made even if the appliance is under guarantee.  
During machine operation it is possible that the red Start/Pause pilot light flashes, one of the following alarm  
codes appears on the display and some acoustic signals sound to indicate that the machine is not working:  
E 10  
-
-
-
: problem with the water supply  
: problem with water draining  
: door open  
E 2 0  
E 40  
Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all  
checks, the problem persists, contact your local Service Force Centre.  
Symptom  
The machine does not start  
Solution  
E 40  
The door has not been closed. (  
)
The plug is not properly inserted in the power socket.  
There is no supply at the socket.  
The main fuse or the fuse in the plug has blown.  
The «Start/Pause» button has not been pressed.  
The «Delay start» option has been selected.  
The «Child lock» option has been enabled.  
The machine does not fill  
E 10  
The water tap is closed. (  
The filter in the inlet hose is blocked. (  
The inlet hose may be squashed or kinked. (  
)
E 10  
)
E 10  
)
E 40  
The door has not been closed. (  
)
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty  
and/or does not spin  
E 2 0  
The drain hose may be squashed or kinked. (  
The “rinse hold” option has been selected.  
)
E 2 0  
The drain pump may be blocked. (  
)
The “None” option has been selected  
The drainage system pipes are blocked.  
The programme “Soak”, which ends with water left in the tub, has  
been selected .  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates  
too much foam).  
Check whether there are any leaks from the inlet hose fittings. It is not  
always easy to see this as the water runs down the hose; check to see  
if it is damp.  
The inlet or drain hose may be damaged or not securely positioned.  
The cap on the emergency emptying hose has not been replaced after  
cleaning the filter.  
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme/temperature has not been selected.  
Too much laundry has been placed in the drum.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Solution  
The energy save system is enabled. Press the any button to switch the  
The green Start/Pause light  
appliance on.  
flashes and the display seems off  
The machine vibrates when  
spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not level and stable (check diagonally).  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
The door will not open  
The water level is too high.  
The machine is heating the water.  
The drum is turning.  
The Door pilot light is still on.  
The electronic balance control device has cut in because the laundry is  
not evenly distributed in the drum. The laundry is redistributed by  
reverse rotation of the drum. This may happen several times before  
the unbalance disappears and normal spinning can resume. If, after few  
minutes, the laundry is still not evenly distributed in the drum, the  
machine will not spin. In this case, redistribute the load manually and  
select the spin programme. If the load is too small, add more items,  
redistribute the load manually and then select the spin programme.  
Spinning starts late or the  
machine does not spin  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor  
ensures a softer start and more even distribution of the laundry in the  
drum when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Technical specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
54 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2050 W (10A)  
WATER PRESSURE  
Minimum  
Maximum  
0.05 MPa (0.5 bar)  
0.80 MPa (8. bar)  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool/Hand wash/30 Minute wash  
6.kg  
3 kg  
3 kg  
2. kg  
SPIN SPEED  
MaximumZ 16 S  
1400 rpm  
CONSUMPTION DATA FOR WASHING  
6 KG NORMALLY SOILED COTTON  
ITEMS WITH PROGRAMME  
Energy  
Water  
1.02 kWh  
42 litres  
COTTONS ECONOMY 60° ”:  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
All transit bolts and packing must be removed  
before using the appliance.  
Keep all packaging away from children.  
You are advised to keep all the transit bolts for re-use  
in case the machine is to be transported again.  
BI0013  
After removing all the packaging, with assistance  
carefully lay machine on it’s back to remove the  
polystyrene base from the bottom.  
Positioning  
Install the machine on a flat hard floor.  
Make sure that air circulation around the machine is  
not impeded by carpets, rugs etc. Check that the  
machine does not touch the wall or other kitchen  
units.  
Remove the power supply cable, the inlet and the  
draining hoses from the hose holders on the rear of  
the appliance.  
Never place cardboard, wood or similar materials  
under the machine to compensate for any unevenness  
in the floor.  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
HEC0001  
HEC0008  
With the spanner provided unscrew and remove the  
central rear bolt A. Slide out the relevant plastic spacer.  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
Unscrew and remove the two large rear bolts B and  
the six smaller bolts C.  
Installation on a suspended floor  
A
Suspended wooden floors are particularly susceptible  
to vibration. To help prevent vibration we recommend  
you place a waterproof wood panel, at least 15 mm  
thick under the appliance, secured to at least 2 floor  
boards with screws. If possible install the appliance in  
one of the corners of the room, where the floor is  
more stable.  
C
B
B
C
BI0010  
BI0009  
Remove the bracket D, refit the six smaller bolts C.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
C
D
Plumbing in  
Your new washing machine has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to a suitable existing tap with the  
drain hose discharging into a sink.  
C
BI0011  
BI0012  
Fill the smaller upper hole and the two large ones with  
the corresponding plastic plug caps supplied in the bag  
containing the instruction booklet.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The appliance has an inlet hose, with female 3/4” BSP  
thread connector. If this connection is not compatible  
with the plumbing of the existing installation, a variety  
of connectors are available from good hardware stores  
and plumbers merchants to suit most domestic  
plumbing. Any alteration to your existing plumbing  
must be carried out by a competent person, or  
qualified plumber.  
There should be a minimum vertical distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom  
of the water storage tank.  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's drainage system using one of the  
following methods.  
Water inlet  
The inlet hose is screwed on the back of the appliance.  
Important!  
1. Into a drainage standpipe.  
Firstly form a hook in the end of the drain hose using  
the “U” piece” supplied.  
Do not place the inlet hose downwards. Angle the  
hose to the left or right depending on the position of  
your water tap.  
U” piece  
supplied  
P1199  
Place the drain hose into your standpipe, which should  
have an internal diameter of approximately 38mm thus  
ensuring there is an air break between the drain hose  
and standpipe.  
HEC0025  
1. Set the hose correctly by loosening the ring nut.  
After positioning the inlet hose, be sure to tighten  
the ring nut again to prevent leaks.  
The appliance must be connected to a cold  
water supply.  
38 mm (½”)  
standpipe  
diameter  
½
2 Connect the hose to a tap with a 3/4” thread. The  
inlet hose must not be lengthened. If it is too short  
and you do not wish to move the tap, you will have  
to purchase a new, longer hose specially designed for  
this type of use.  
HEC0013  
When discharging into a standpipe ensure that the top  
of the standpipe is no more than 90cm (35.4'') and no  
less than 60cm (23.6'') above floor level.  
3 pin  
P1088  
Installation should comply with local water authority  
and building regulations’ requirements.  
HEC0012  
A minimum water pressure of 0.5 bar is required for  
safe operation of the appliance.  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre. The  
joining piece must have an internal diameter of 18mm.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your drain hose looks like this (see below) you do  
not require the “U” piece”. Just push the hose firmly  
into the standpipe.  
BI0007  
BI0008  
After having levelled the machine, tighten the lock nuts.  
P1212  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, (see note on  
positioning), noise and displacement of the machine  
during operation.  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
2. Onto a sink outlet spigot.  
If the outlet spigot has not been used before, remove  
any blanking plug that may be in place.  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
In the interest of the environment  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
P1197  
Push the drain hose onto the spigot and secure with a  
clip, ensure a loop is formed in the drain hose (see  
diagram) to prevent waste from the sink entering the  
washing machine.  
SHOWER  
SINK TOILET  
Loop  
BATH  
BIDET  
P1198  
WASHING  
MACHINE  
DISHWASHER  
RAINWATER  
'RUN-OFF'  
Important  
FOUL DRAIN  
Before connecting the machine to new pipework or to  
pipework that has not been used for some time, run off  
a reasonable amount of water to flush out any debris  
that may have collected in the pipes.  
SURFACE WATER  
FOUL SEWERS  
DRAINS & SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
RIVER  
RIVER  
P0987  
Levelling  
It is essential that these appliances are not connected  
to the surface water drainage system as this water is  
discharged directly into a river or stream and may  
cause pollution.  
If you require any further advice please contact your  
local water authority.  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable. If necessary, check the setting with a spirit level.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you fit your own plug, the colours of the wires in the  
mains lead of your appliance may not correspond with  
the markings identifying the terminals in your plug.  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
Proceed as follows:  
1.The wire coloured green and yellow must be  
connected to the terminal marked with the letter  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
«E» or by the earth symbol  
and yellow.  
or coloured green  
The manufacturer declines any liability  
should this safety measure not be  
observed.  
2.The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
Should the appliance power supply cable  
need to be replaced, this must be carried  
out by a Service Force agent (see page 27).  
3.The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
4.Upon completion there must be no cut, or stray  
strands of wire present and the cord clamp must be  
secure over the outer sheath.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
WARNING:  
A cut off plug inserted into a 13 amp  
socket is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
P
r o  
M
d
N
o
.
d
.
.
.
.
.
.
.
.
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
S
e
.
r
N
o
.
.
.
.
.
.
.
.
.
.
The power supply cable must be easily  
accessible after installing the appliance.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
The appliance should not be connected to  
the electrical supply by means of an  
extension cable.  
P0042 BD  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363/A) fuse  
must be used.  
Permanent connection  
In the case of permanent connection it is necessary  
that you install a double pole switch between the  
appliance and the electricity supply (mains), with a  
minimum gap of 3mm between the switch contacts and  
of a type suitable for the required load in compliance  
with the current electrical regulations.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in accordance  
with the following code:  
Green and Yellow  
Blue  
Brown  
- Earth  
- Neutral  
- Live  
The switch must not break the yellow and green earth  
cable at any point.  
GREEN &YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35 Ø 14 prof.  
Building-in  
16-22  
This appliance has been designed to be built into the  
kitchen furniture. The recess should have the  
dimensions shown in picture A.  
00  
6
22+1,5  
6
00  
595-598  
C
min.  
P0422  
596  
70  
5
b) Hinges  
1
54  
To mount the hinges it is necessary to drill two holes  
(dia. 35 mm, depth 12.5-14 mm depending on the  
depth of door furniture) on the inner side of the door.  
The distance between the holes hobs fixing centres  
must be 416 mm.  
The distance (B) from upper edge of the door to the  
centre of the hole depends on the adjacent furniture's  
dimensions.  
8
0
9
0
49  
A
P0965  
When installing the appliance into the kitchen furniture  
ensure, if possible, the hoses are placed in either of the  
two recesses on the back of the appliance. This will  
help to prevent the hoses from becoming kinked or  
trapped.  
The required dimensions are given in the picture C.  
The hinges will be fixed to the door by means of  
screws for wood (2-Fig. B) supplied with the appliance.  
Preparation and assembly of  
the door  
c) Mounting the door  
Fix the hinges (1) to the machine by means of the  
M5x15 screws (3-Fig. B). The hinges can be adjusted to  
compensate for possible uneven thickness of the door.  
To align the door perfectly it is necessary to loosen the  
screw (3-Fig. B), adjust the door and tighten the screw  
again.  
The machine is originally pre-arranged for the assembly  
of a door opening from right to left.  
In this case it is sufficient to screw in the hinges (1) and  
the counter-magnet (6) provided with the appliance, at  
the right level (Fig. B).  
B
d) Counter-magnet (6)  
6
4
The appliance is pre-arranged for a magnetic closure of  
the door. To enable a correct operation of this device,  
it is necessary to screw the counter-magnet (6) (steel  
disk + rubber ring) into the inner side of the door.  
Its position must correspond to the magnet (4) on the  
appliance (See fig. D).  
1
5
7
3
2
P0982  
a) Door  
6
The dimensions of the door should be:  
4
- width  
595-598 mm  
- thickness 16-22 mm  
The height (C-Fig. C) depends on the height of the  
adjacent furniture's base.  
D
P0984  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drill four fixing holes see Fig. G  
If the door has to be opened from left to right, invert  
the position of the plates (7), the magnet (4) and the  
plate (5) (Fig. B and E). Mount the countermagnet (6)  
and the hinges (1) as previously described.  
600-605 mm  
490 mm  
E
6
4
95 mm  
Front edge  
50 mm  
1
5
7
Top view  
G
3
Position the base into the recess with its front edge as  
far forward as the adjoining plinth line will allow.  
2
P0983  
The reason for placing the base in this position  
is to allow a small strip of beading to be fitted in  
front of the appliance feet.  
Recommendations regarding  
the construction and fitting of  
a base when the installation  
requires an integrated  
Fix the base firmly to the floor using four appropriate  
countersunk screws (see Fig. H).  
appliance to be raised  
Where the appliance has been raised by mounting onto  
a wooden base provided by the installer. The material  
used to construct the base should have a non slip  
surface, be water repellent and if possible be one solid  
piece.  
Hardwood strip  
5 mm x 25 mm  
5 X 25 X 605  
490  
600-605  
H
If it is not possible to use one solid piece, due to the  
additional height required, ensure that any additional  
strips of timber are glued and screwed to the underside  
of the base (see Fig. F).  
With the appliance installed adjust all four feet ensuring  
the machine is stable, and a clearance of approximately  
5 mm is left between the top of the machine and the  
underside of the worktop.  
5 mm Hardwood strip  
Additional pieces of  
A final check for stability should be carried out with the  
machine on spin with a load, this will identify the need  
for any further fine adjustment to the feet.  
timber should run  
from front to back  
40 mm  
100 mm  
600-605 mm  
A strip of beading approximately 605 mm W, x 5 mm  
H, x 25 mm D must be screwed down into the base  
directly in front of the machine’s feet, this will provide  
additional security.  
Front view  
F
If required an additional door magnet, part number  
1242394-00/3 and disc, part number 1242393-00/5 are  
available from spare parts.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repairs - After sales service  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact our  
extended warranty administrators by telephoning:  
0870 01 07887  
P
r o  
M
d
.
N
o
o
d
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . .  
. .  
S
e r  
.
N
o
. . . . . . . . .  
.
They will give you details for your local Service Force  
Centre. Service Force are the appointed national  
appliance repair agents responsible for warranty repairs  
to this appliance.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
Please note that a valid purchase receipt is  
required for in-guarantee service calls.  
When you contact the Service Force Centre you will  
need to give the following details:  
Spare parts  
An authorised service engineer should service this  
product, and only genuine spare parts should be used.  
Under no circumstances should you attempt to repair  
the machine yourself. Repairs carried out by  
inexperienced persons may cause injury or serious  
malfunctioning. Contact your local Service Force  
Centre.  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The purchase date and found on your receipt.  
5. The model and serial number of the appliance  
(found on the rating plate - see picture)  
So that you always have these numbers to hand, we  
recommend you to make a note of them here.  
Model................................................................................................  
PNC...................................................................................................  
SN.......................................................................................................  
Your washing machine is covered by a 3 year  
parts and labour guarantee (see separate  
details given at point of sale). Please retain your  
purchase receipt safely for the service .  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
John Lewis Partnership  
171 Victoria Street  
London SW1E 5NN  
132 963 910  
34/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Water Pump 650517 User Manual
IOGear Tool Storage gmfpslu22w6 User Manual
JVC Flat Panel Television GV DT3 User Manual
JVC Flat Panel Television LT Z40SX6 User Manual
JVC TV VCR Combo TV 13142 User Manual
KEF Audio Speaker XQ10 User Manual
Kenmore Water Heater 153339161 User Manual
Kensington Network Card Universal AC Car Air Adapter User Manual
Kenwood Car Speaker SP 230 User Manual
Kettler Baby Toy 8852 600 User Manual