JLTDC 05
TUMBLE DRYER
Instruction manual
Cooling 10 minutes
Off
Extra dry
Store dry
Dry time
Drying
Cooling
End
30 minutes
60 minutes
90 minutes
Delicates
Cupboard dry
Damp dry
Iron dry
Alarm
off
Half
Quick power
Delay
start
Start/
Pause
Filter
Door
Full tank
Condenser
Machine iron dry
Extra dry
Cupboard dry
Iron dry
JLTDCO5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
• Emptying the water reservoir
• Cleaning the drum
16
16
For the User
Important Safety Information
• Installation
• Child Safety
• Use
2
Adjusting the level of conductivity 17
Something Not Working
Service and Spare Parts
Customer Care
18
18
18
Your New Tumble Dryer
Description of the Appliance
4
5
For the Installer
Installation Instructions
6
Guide to using the Instruction Book
The following symbols will be found in the text to
Technical Specifications
6
• CE information
6
guide you throughout the instructions:
Safety instructions
Hints and tips
• Unpacking
7
• Positioning
7
7
7
• Stacking kit (optional accessory)
• Door reversal
Environmental information
Electrical connection
8
The Control Panel
9
• Programme/Time Selector Dial
• Door Release Button
• No Buzzer Button
• Quick Dry Button
• Low Temperature Button
• Delay Start Button
• Display
9
9
This appliance complies with the following E.E.C.
Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive)
and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
9
9
9
9
10
11
11
11
• Start/Pause Button
• Indicator Lights
• Indicator Lights
Programme Chart
12
13
14
15
15
15
15
15
Operating Sequence
Hints & Tips on Drying
Maintenance and Cleaning
• External cleaning
• Cleaning the door
• Cleaning the filters
• Cleaning the condenser unit
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Tumble Dryer
This tumble dryer will give your wash that soft, relaxed feel whatever the
weather.
Extremely high quality standards both during development and
manufacturing guarantee a long service life for your appliance.
Maximum economy in the operation of your dryer is achieved through very
economical consumption and short drying times.
• Do not over-dry laundry, this avoids creasing and saves
energy.
Energy saving tips
To save energy we recommend that you follow these
• Clean the filters regularly to avoid excessive drying
hints:
times and high electricity consumption.
• Try to load the maximum capacity of the machine as
• Ventilate the room well. The room temperature should
small loads are uneconomical.
not exceed +35°C during drying.
• Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
Environmental Information
• Materials marked with the symbol
are recyclable.
The symbol
on the product or on its packaging
• Check with your local Council or Environmental Health
Office to see if there are facilities in your area for re-
cycling this appliance.
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by in appropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
• When the appliance is to be scrapped, cut off the
power supply cable and make the door closing device
unusable to prevent young children from being trapped
inside.
• Help to keep your country tidy - use authorised
disposal sites for your old appliance.
A cut off plug inserted into a 13amp socket is a
serious safety (shock) hazard. Ensure that the
cut off plug is disposed of safely.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
01 Control panel
02 Water reservoir
3 Drum Light
1
3
4
04 Fluff filters
05 Rating Plate
2
06 Condenser unit
07 Adjustable feet
5
4
7
6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm (33.5”)
60 cm (23.6”)
58 cm (22.8”)
POWER SUPPLY VOLTAGE
TOTAL POWER ADSORBED
230-240 V/50 Hz
2450 W (13A)
MAX LOAD CAPACITY
Cotton, linen
Synthetics
6 kg (13.2 lbs)
3 kg (06.6 lbs)
DRUM VOLUME
108 l
CONSUMPTIONS
Cotton, linen
Cotton, linen
Synthetics
4.37 kWh (6, kg cupboard dry)
3.60 kWh (6 kg iron dry)
1.70 kWh (3 kg cupboard dry)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Stacking kit (optional accessory)
It should be possible to stack your new dryer on top of a
front loading washing machine with cover’s depth
between 48 and 60 cm.
Unpacking
Warning !
Slide out the polythene bag containing the
polystyrene block before using the appliance. Pull
off adhesive strips from inside machine on top of
drum.
Read carefully the instructions supplied with the kit.
Please contact your local John Lewis branch for further
advice.
Keep all packaging away from children.
P1148
Door reversal
P1106
To make it easier to load or unload the laundry the door
can be reversed.
This operation must be carried out by qualified
personnel.
Should the appliance be moved, it must
be transported vertically.
Please contact your local Service Force Centre for further
information on how to proceed.
Positioning
Note:
This is a chargeable option.
It is recommended that, for your convenience, the
machine is positioned close to your washing machine.
The tumble dryer must be installed in a clean place,
where dirt does not build up.
Air must be able to circulate freely all round the
appliance. Do not obstruct the front ventilation grill or
the air intake grills at the back of the machine.
To keep vibration and noise to a minimum when the
dryer is in use, it should be placed on a firm, level surface.
Once in its permanent operating position, check that the
dryer is absolutely level with the aid of a spirit level. If it is
not, raise or lower the feet until it is.
The feet must never be removed.
Do not restrict the floor clearance through deep-
pile carpets, strips of wood or similar. This might
cause heat build-up which would interfere with
the operation of the appliance.
Important
The hot air emitted by the tumble dryer can reach
temperatures of up to 60°C. The appliance must
therefore not be installed on floors which are not
resistant to high temperatures.
When operating the tumble dryer, the room temperature
must not be lower than +5°C and higher than +35°C, as it
may affect the performance of the appliance.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
WARNING:
WARNING: THIS APPLIANCE MUST
BE EARTHED.
A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
hazard.
Ensure that the cut off plug is disposed of
safely.
The manufacturer declines any liability
should this safety measure not be
observed.
Should the appliance power supply cable
need to be replaced, this must be carried
out by by a Service Force repair agent (Pg
18 service and spare parts)
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap of
3mm between the switch contacts and of a type suitable
for the required load in compliance with the current
electrical regulations.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. (See picture on page 5).
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved BS 1363/A fuse must
be used.
The switch must not break the yellow and green earth
cable at any point.
Should the plug need to be replaced for any reason, proceed
as described below. The wires in the mains lead are
coloured in accordance with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
GREEN & YELLOW
E
L
N
BROWN
BLUE
CORD CLAMP
P1041
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
Cooling 10 minutes
Off
Extra dry
Store dry
Dry time
Drying
Cooling
End
30 minutes
60 minutes
90 minutes
Delicates
Cupboard dry
Damp dry
Iron dry
Alarm
off
Half
Quick power
Delay
start
Start/
Pause
Filter
Door
Full tank
Condenser
Machine iron dry
Extra dry
Cupboard dry
Iron dry
JLTDCO5
1
2 3 4 5 6 7 8 9
• when depressing the buttons
1 Programme/Time Selector Dial
• when an incorrect option selection is made
Allows you to select electronically controlled or time
controlled drying.
• when the programme selector dial is turned to another
position during the programme or when you depress an
option button during the cycle
Turn the dial to the required programme or time.
Electronically controlled drying (automatic)
• at the end of the programme
The appliance runs these programmes with the help of
probes which detect the degree of dampness of the
laundry.
Simply select the programme according to the type of
laundry and degree of drying required.
• when the water reservoir is full
• if the machine is not working correctly
• when the small door at the bottom is open.
By depressing the button the acoustic signal is switched off.
The corresponding light comes on.
Time controlled drying
This can be used to finish off drying if necessary.
Select the 90 or 60 minute programme for cottons or the
30 minute programme for synthetics.
4 Quick dry Button
By depressing this button the drying time is reduced in
the following COTTON programmes:
To cancel a programme which is running, turn the
programme selector dial to “Off”.
• EXTRA DRY
At the end of drying, turn the selector dial to “Off” to
switch the machine off before removing the laundry.
• CUPBOARD DRY
• STORE DRY
If the programme selector dial is turned to another
position, when the machine is running, the buzzer will
sound and the programme phase indicator lights will flash.
The corresponding pilot light comes on.
This option cannot be selected with HALF POWER
function.
2
Door release Button
5 Half Power Button
Pressing this button allows drying to be performed at a
lower temperature, for delicate items.
Press this button to open the door. The light above the
button will illuminate.
Opening the door by means of this button is
possible only if the tumble dryer is on
(programme selector dial set to a programme or
drying time).
The corresponding pilot light comes on.
This option can also be used for time controlled drying.
This option cannot be selected with QUICK and
DELICATES programme.
If you open the door during a programme, in order to
restart the programme you must press the
START/PAUSE button again after having closed the door.
6 Delay Start button
This button allows you to delay the starting of the
programme by 12 hours max.
3 Alarm off Button
A buzzer sounds
This option must be selected after having selected the
programme and before pressing START/PAUSE to start
the programme.
• when selecting the programme
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Every time the button is pressed, the time is increased by
30 minutes, until the display shows a delay of “2 hours”.
After this, the delay is displayed hour by hour.
The countdown is displayed every 30 minutes until it
displays “90 minutes” and then hour by hour.
The minutes or hours of delay that have been selected
are displayed for 2 seconds, then the display shows the
duration of the previously selected programme.
The countdown begins after you have pressed the
START/PAUSE button.
3
To cancel the delay time, during the drying phase the
START/PAUSE button to set your appliance to pause and
then press the DELAY START button until the display
indicates 0’. Then press the START/PAUSE button again.
• End of programme
A flashing zero indicates the end of the programme
and it is displayed after the “anti-creasing” phase.
When the delay is cancelled, the display shows the
duration of the programme.
During the delayed start, it is not possible to change the
programme or the delay time that have been selected. To
do this, you must first switch off the machine by setting
the programme selector dial to “Off”. Select the new
programme, the options and the delayed start, then press
the START/PAUSE button.
0
If you wish to add more laundry while the machine is
performing the countdown, simply open the door. When
you close the door, press the START/PAUSE button again
to cause the countdown to be resumed.
• Incorrect option selection
If you select an option that is not compatible with the
programme you have selected, the display shows Err
(error).
7 Display
The display shows the following information:
• duration of selected programme
• delayed start
• end of programme
• incorrect option selection
• alarm code
• Duration of selected programme
After you have selected the programme, its duration (in
hours and minutes) appears on the display. It is calculated
automatically on the basis of the maximum load accepted
for each type of fabric and of the required degree of drying.
This code will reappear during the execution of the
programme if you press one of the option buttons.
• Alarm code
In the case of a functional problem, the display shows
an alarm code (e.g. E21). See page 13 for more detailed
information.
1.20
When the programme starts, the remaining time is
displayed every 5 minutes.
E21
• Delayed start
If you have selected a delay time by means of the
relevant button, the display shows it for 2 seconds; then
it shows the duration of the previously selected programme.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
“End” light
8 Start/Pause button
This light illuminates at the end of the cooling phase,
during the anti-creasing phase and at the end of the
programme.
Press this button to start the dryer after having selected
the programme and the options.
The relevant light will stop flashing. If you have chosen a
delayed start, the machine will begin the countdown.
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again after
closing the door in order to restart the
programme from the point at which it was
interrupted.
This button must also be depressed after a power failure
and after having re-inserted the water reservoir, if it has
been emptied in the middle of a programme after the
“FULL TANK” light has illuminated.
“Filter” light
This light illuminates at the end of the programme to
remind you that the filters must be cleaned.
“Full Tank” light
This light illuminates at the end of the programme to
remind you that the water reservoir must be emptied
out. If this light illuminates during a programme this
means that the water reservoir is full. The buzzer sounds,
the programme stops, the light of the Start/Pause button
flashes.
In both cases the light of the Start/Pause button flashes to
remind you that the start button needs to be pressed
again.
“Condenser” light
It comes on every 80 cycles to remind you that the
condenser must be cleaned.
9 Indicator Lights
These lights indicate the following functions:
.
“Drying” light
This light indicates that the appliance is in the drying
phase.
“Cooling” light
This light indicates that the appliance is in the cooling
phase. At the end of drying, there is a 10 minute cooling
phase to cool the laundry.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme Chart
Automatic drying (electronic programmes)
Degree of drying
Type of laundry
Max-load (1)
required
Extra dry
store dry
6 kg
6 kg
6 kg
6 kg
6 kg
6 kg
CUPBOARD dry
COTTON
damp DRY
iron dry
MACHINE IRON dry
EXTRA DRY
CUPOARD DRY
3 kg
3 kg
3 kg
SYNTHETICS
IRON DRY
1 kg
Wollens
WOOL REFRESH
DRY CLEANING
Jackets, trousers,
dresses, skirts.
1 - 4 garments
• WOOL REFRESH is special programme for briefly treating woollens with warm air after they have been
dried naturally, worn or stored for long periods. Wool fibres are aligned and the wool becomes soft and
snugly.
• DRY CLEANING is designed to freshen garments labelled “DRY CLEAN ONLY” at home, in your tumble
dryer, using the special products available on the market.
Time controlled drying
Programme
Max-load (1)
6 kg
Type of laundry
COTTON
Drying time
90 min
selector dial position
90’ minutes
60’ minutes
30’ minutes
60 min
6 kg
COTTON
30 min
3 kg
SYNTHETICS
(1) Never overfill the drum (do not load large quilts, for example).
Drying times vary according to:
• The type of laundry
• The size of the load
• The degree of spinning prior to drying.
• The degree of dryness required
Cooling 10 minutes
This position on the programme selector dial can be used to freshen the laundry (e.g. to remove a persistent odour of
moth-balls).
Load
It is often difficult to estimate the weight of items to be dried. We therefore recommend that you adopt the following
guidelines:
• cotton, linen: drum full but not too tightly packed;
• synthetics: drum no more than half full;
• delicate fabrics: drum no more than one third full.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
The END, FILTER and FULL TANK lights remain lit
and the buzzer sounds every 10 seconds for 2
minutes.
Before using your tumble dryer for the first time, we
recommend that you to place a few damp cloths
inside the appliance and dry for 30 minutes.
There may be dust inside a brand new tumble dryer.
The light of the START/PAUSE button goes off and a
flashing zero appears on the display.
10. Turn the programme selector dial to “Off”; all the
Drying
lights go out. The appliance is switched off.
1. Connect the appliance.
Remove the laundry.
2. Open the door (see picture).
If you open and then close the door before
turning the programme selector dial to
“Off”, all the lights corresponding to the
phases making up the performed
programme come on and the display shows
the duration of the programme.
After each use
P1149
P1108
• Clean the filters (see page 15).
• Empty the water reservoir (see page 16).
3. Load the items one at a time, shaking them out
loosely.
Important!
4. Close the door. Please check the laundry does not get
caught between the door and filter.
If the drying programme has to be stopped before it
reaches the end, we recommend that you turn the
programme selector dial to position “Cooling” and wait
until the end of this phase before removing the laundry.
This will avoid a build-up of heat inside the appliance. To
do this first turn the dial to “Off” and then to “Cooling”
5. Select the drying programme or time. The lights
DRYING, COOLING and END come on. The light of
the START/PAUSE button flashes and the display
shows the duration of the programme.
6. If required, press the HALF POWER button and/or
the ALARM OFF button or the QUICK button.
and depress START/PAUSE Button
.
7. Select the DELAY START if required. The selected
delay appears on the display for 2 seconds, then the
duration of the selected programme is displayed.
Modifying the programme
To change a programme which is running, first cancel it by
turning the programme selector dial to “Off”. Select the
new programme and press the START/PAUSE Button.
8. Press the START/PAUSE button: the corresponding
light stops flashing and drying starts. Only the
DRYING light stays lit. If you have selected the
DELAY START, the machine begins its countdown.
If the programme selector dial is turned to another
position, when the machine is running, the buzzer will
sound, the programme phase indicator lights will flash.
The drum turns alternately in both directions during
drying.
All drying programmes end with a 10 minute cooling
phase (COOLING light illuminates).
You may remove the laundry after this phase.
The lights END, FILTER and FULL TANK illuminate and
the buzzer sounds.
The display shows a static zero.
9. If the laundry is not removed at the end of the cycle,
the dryer performs an anti-creasing phase (duration:
30 minutes maximum).
If you do not remove the laundry, the dryer will stop
automatically at the end of the anti-creasing phase.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints & Tips on Drying
• Always load well spun laundry. The higher the spin
speed the lower the electricity consumption and the
shorter the drying time.
Before placing articles of laundry in your tumble
dryer, check the care labels to ensure they are
recommended for tumble drying.
• DO NOT load dripping wet laundry into the dryer. Roll
the article in a towel or spin to remove excess water.
Care Labels you may find on your laundry
• Close poppers and zips and fasten any buttons.
may be tumble dried
• Sort the laundry. Separate synthetics from
cotton/linens, and dry separately.
normal drying (high temperature)
delicate drying (low temperature)
do not tumble dry
• Remove the laundry immediately after the programme
has finished.
• Use a fabric conditioning sheet to reduce static. We
recommend the sheet is pinned to an article of laundry
(using a safety pin).
Do not overload the appliance.
• Mix the load i.e. large and small articles.
• When drying large items such as sheets, we
recommend you periodically stop the dryer to
redistribute the load.
Here is a list of the approximate weight of some common
laundry items.
Sheet
700 to 1000 g
100 to 200 g
400 to 500 g
50 to 100 g
DO NOT use the tumble dryer to dry the
following:
Pillowcase
Tablecloth
Table Napkin
Kitchen Towel
Linen Hand Towel
Hand Towel
Bath Towel
Bathrobe
• Articles contaminated with inflammable substances e.g.
petrol, cleaning solvents, cooking oil, fats or hair
lacquer.
70 to 120 g
• Woollen and synthetic/wool mixtures unless the item is
labelled as suitable for tumble drying.
100 to 150 g
150 to 250 g
700 to 1000 g
1000 to 1500 g
200 to 300 g
150 to 200 g
• Very delicate articles such as silk.
• Very large and bulky items such as duvets or sleeping
bags.
Shirt
Apron
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
After a while, a whitish coating due to detergent residue
You must disconnect the appliance from the
electricity supply, before you can carry out any
cleaning or maintenance work.
on laundry forms on the filters. When this occurs, clean
the filters with warm water using a brush. Remove the
filter in the door opening as per picture (it can be
positioned with the tooth facing to the left or to the
right).
External cleaning
Use only soap and water and then dry thoroughly.
Important: do not use methylated spirit, diluents or
similar products.
S
E
650
E
R
E
V
5
'
6
0'
5'
T
O
R
0
-
-
,
5
kg
k
g
2
1
A
U
/
12
00
95'
65'
3
1000
7
30
'
0
/
-
-
90
800
5'
-
-
/
120
0
'
1
00'
70
'
80
5'
5
0'
/
90
0
85
'
800
70'
35'
5'
-
5
-
-
9
5
0'
0'
-
45'
kg
kg
5
2
,5
Cleaning the door
Clean periodically the interior part of the door to
remove any fluff from the seals around the filter.
P1152
Regular cleaning ensures correct drying.
S
E
650
R
E
V
5
0
'
-
60'
T
O
R
,
5
U
kg
2
A
/
12
00
95'
65'
-
3
5'
1000
30
'
/
-
-
90
0
kg
1
800
-
-
7
5'
/
120
0
1000
80
5'
'
1
00'
70
'
0
'
5
0'
/
90
85
800
70'
35'
-
6
5'
5
90
0'
'
-
-
45'
-
kg
kg
5
2
3
0'
5
,5
Do not use the appliance without filters.
Cleaning the condenser unit
Clean the air condenser when CONDENSER light
illuminates.
P1150
The condenser is situated at the lower part of the cabinet
behind a small door. To open the door, push the catch as
per picture.
Cleaning the filters
Your dryer will only function well if the filters are clean.
The filters collect all the fluff which accumulates during
drying and they must therefore be cleaned at the end of
each programme, before removing the laundry, with a
damp cloth. The FILTER light reminds you to carry out
this operation.
P1153
S
E
650
E
R
E
V
-
-
6
0'
5'
T
O
R
2,
5
50'
A
U
/
12
00
95'
65'
kg
k
g
3
1000
7
30
'
/
-
-
90
0
1
800
5'
-
-
/
120
0
1000
6
80
5'
'
1
00'
70
'
0
5
0'
/
90
85
'
800
70'
3
5'
5'
-
5
'
-
-
90
0'
45'
-
kg
kg
5
2
3
0'
5
,5
During the drying cycle or at the end, it is normal
for water to be present on the surface of the
condenser insertion .
To pull out the condenser, first turn the two red stops
downwards as shown below and then remove the
condenser unit holding it at the handle.
P1151
P1110
The filter in the inner door must be removed for cleaning.
Do not be alarmed by the amount of fluff. It is not due to
excessive wear caused by the dryer. All fabric looses fluff
when drying but it goes un-noticed in the air. In a tumble
dryer it simply collects in the filter.
P1155
P1154
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Clean it with a brush and rinse it under the shower if
necessary.
The reservoir must be re-inserted correctly.
If this is not done the pilot light FULL TANK comes on
during next drying and the programme stops, leaving the
laundry damp. The buzzer will sound.
After inserting the reservoir the START/PAUSE button
has to be depressed again to allow the programme to
continue.
Handy tip: The condensed water may be used in a
steam iron or to top up a battery, etc. In this case it must
be filtered (e.g. through a coffee filter).
P0639
Also clean the outside, removing all fluff.
Clean the rubber seal round the condenser cabinet and in
the inner part of the small door with a damp cloth.
Cleaning the drum
When your laundry does not reach the desired degree of
dryness, in other words, when it turns out either too dry
or too damp,we advise you to clean the inside of the
drum with a cloth soaked with vinegar.
Important! Do not use pointed objects or utensils to
clean the spaces between the plates, as this could damage
the condenser and make it permeable.
Re-fit the condenser, turn the red stops upwards and
close the door.
This will eliminate the slight patina that has formed in the
drum (due to residues of detergent and softeners used in
the washing, and to the lime contained in the water),
which prevents the probes from detecting the correct
degree of dryness.
Do not use this appliance if the
condenser has not been fitted.
Emptying the water reservoir
Water extracted from the laundry condenses inside the
machine and is collected in a reservoir.
The reservoir must be emptied after each drying cycle to
ensure efficient operation when the machine is next used.
The FULL TANK light reminds you to perform this
operation.
Proceed as follows:
• Pull out the reservoir
• Turn it upside down and let water empty
• Re-fit the reservoir
P1157
P1156
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the level of conductivity
Water contains, a variable quantity of limestone and
mineral salts of which quantities vary according to
geographical locations thus varying its conductivity values.
Conductivity
degree
Approximative
value (µS/cm)
Display
Relevant variations of the conductivity of the water
compared to those prefixed by the factory could slightly
influence the residual humidity of the laundry at the end
of the cycle.
Low
Medium
High
< 300
C0
C0
C0
300 - 600
> 600
Your dryer allows you to regulate the sensitivity of the
drying sensor based on conductivity values of the water
by using the following procedure.
To establish the hardness of your water to correspond
with the table opposite please contact your local water
authority.
highest level; however, certain models may be
configured differently.
Memorising the new setting:
Simultaneously press down the buttons 3 and 6 until the
previous drying cycle time appears again on the display
and the buzzer sounds.
Procedure:
Turn the programme selector dial to switch on the
appliance
In selection mode press simultaneously the buttons 3 and
6 until «C0» appears on the digits.
Cooling 10 minutes
Dry cleaning
30 minutes
Off
Extra dry
Store dry
Dry time
Drying
Cupboard dry
Damp dry
Cooling
1.25
End
60 minutes
90 minutes
Iron dry
Alarm
off
Half
Delay
start
Start/
Pause
Filter
Delicates
Machine iron dry
Extra dry
Door
Quick
power
Full tank
Condenser
1
2
3
4
5
6
Cupboard dry
Iron dry
JLTDCO5
Adjusting the level of conductivity:
Press the button 5 sequentially: the level of conductivity is
indicated by the lighting of the horizontal hyphens.
Dry time
Drying
Cooling
End
Start/
Pause
Alarm
off
Half
power
Delay
start
Filter
Door
Quick
Full tank
Condenser
1 2 3 4 5
6
JLTDCO5
Normally, the appliance is factory-set to the
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an
engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
IMPORTANT: if the END light flashes, the buzzer sounds and an alarm code is displayed, switch the machine off and
call the Service Centre.
Symptom
Solution
• The door(s) has (have) not been closed.
• The plug is not properly inserted in the power socket.
• There is no current at the socket.
The tumble dryer does not start
• The main fuse or the fuse in the plug has blown.
• The selector dial is not set correctly.
• The water reservoir is full or not properly inserted (the
FULL TANK light is on ). The programme starts in any
case but it stops after approx. 4 minutes.
• The START/PAUSE Button has not been depressed.
• The DELAY START option has been selected.
• The laundry has not been spun properly.
• The filters and/or the condenser are clogged.
• The water reservoir is full.
Drying takes too long or laundry is not
dry enough.
• The room temperature is too high.
• The selected time or drying cycle was not suitable for
the laundry.
• The LOW TEMPERATURE button has been pressed.
• There is too much laundry inside the appliance.
• The dryer is not correctly installed.
The drum light does not light up:
Service & Spare Parts
In the event of your appliance requiring service, or if you
wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
• The Programme/Time selector dial is on position “OFF”.
• The lamp is defective.
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. :. . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . .
S.N. :. . . . . . . . . . . . . . . . . .
Your dryer is covered by a 3 year parts and labour
guarantee (see separate details given at point of
sale). Please retain your purchase receipt safely
for the service engineer to verify the purchase
details.
0870 010 7887
They will give you details for your local Service Force
Centre.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
Spare parts
When you contact your local Service Force Centre you
will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The purchase date.
An authorised service engineer should service this
product, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force Centre.
Always insist on genuine spare parts.
5. The model and serial number of the appliance (found
on the rating plate - see picture on page 5)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
125980753
11/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|