John Deere Lawn Mower Accessory PC20469 19 24OCT05 User Manual

AutoTrac Universal  
Steering Kit for Case  
MX Tractors  
INSTALLATION INSTRUCTIONS  
PC20469 24OCT05 (ENGLISH)  
AutoTrac Universal Steering Kit for Case MX  
Tractors  
John Deere Ag Management Solutions  
PC20469 (24OCT05)  
COPYRIGHT 2005  
DEERE & COMPANY  
Moline, Illinois  
All rights reserved  
A John Deere ILLUSTRUCTION Manual  
PC20469-19-24OCT05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Recognize Safety Information  
This is a safety-alert symbol. When you see this symbol  
on your machine or in this manual, be alert to potential for  
personal injury.  
Follow recommended precautions and safe operating  
practices.  
OUO6050,000148D –19–18OCT05–1/1  
Items to Note Prior to Installation  
The following instructions are to be used only as a  
supplement to the primary installation instructions  
included with your AutoTrac Universal Steering kit.  
For additional vehicle specific information, including  
hardware and recommended vehicle settings, please  
additional platform specific information.  
Several items are a part of the AutoTrac accuracy  
equation. Please keep these external factors in mind  
when installing components to provide the best  
operating environment possible. (See AMS TALK  
Bulletin # 043 and 048)  
turn the steering wheel and observe the movement  
of the wheels. If the wheels don’t begin to turn when  
the steering wheel is turned you may not achieve  
optimal performance. Compare results with those of  
a new vehicle of a similar model.  
Please refer to installation instructions included with  
the GreenStar wiring harness and AutoTrac  
Universal Steering kit for component location and  
installation.  
Tighten all hardware that is installed to  
manufacturer’s specifications.  
Be aware that system may not perform well if you  
have excessive wear in the steering linkage and  
joints.  
Identification of worn and/or higher tolerance  
steering components is vital for optimal performance  
of the ATU kit. One method of checking wear, is to  
IMPORTANT: AutoTrac Universal is to be installed  
on approved platforms only. For a  
complete list of approved platforms  
please go to  
OUO6050,000148E –19–24OCT05–1/1  
PC20469 (24OCT05)  
1
Installation Instructions  
102405  
PN=3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Kit Components  
A—Receiver Mounting Brackets (2 Used)  
B—Steering Wheel Spline/Bushing  
C—Receiver Mounting Bracket Bolts (6 Used)  
OUO6050,000147A –19–16OCT05–1/1  
Attaching StarFire Receiver  
The brackets included in this kit are to be used in  
combination with those included in the GreenStar Harness  
and StarFire Cab Bracket kit.  
OUO6050,000147B –19–16OCT05–1/5  
1. Remove both exterior cab mirrors.  
A—Cab Mirrors  
Continued on next page  
OUO6050,000147B –19–16OCT05–2/5  
PC20469 (24OCT05)  
2
Installation Instructions  
102405  
PN=4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
2. Attach receiver mounting brackets (A) between mirrors  
(B) and tractor frame using the longer bolts (C) that  
were included in the kit.  
A—Receiver Mounting Bracket  
B—Mirror  
C—Bolts  
OUO6050,000147B –19–16OCT05–3/5  
3. Assemble cab bracket. (See StarFire cab bracket kit  
instructions if needed.)  
4. Attach cab bracket (A) to receiver mounting brackets  
(B).  
A—Cab Bracket  
B—Receiver Mounting Brackets  
Continued on next page  
OUO6050,000147B –19–16OCT05–4/5  
PC20469 (24OCT05)  
3
Installation Instructions  
102405  
PN=5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
5. Attach StarFire receiver (A).  
A—StarFire Receiver  
OUO6050,000147B –19–16OCT05–5/5  
Installing AutoTrac Universal Steering Kit  
NOTE: Attach steering unit in 3 o’clock position.  
1. After completing the installation of the StarFire  
receiver, refer to the complete AutoTrac Universal  
Steering Kit installation manual for information on  
inserting the steering wheel spline/bushing in the  
steering unit.  
2. After bushing has been properly installed, steering unit  
(A) should be attached on the steering column in the 3  
o’clock position.  
3. For all other installation and setup information, please  
see the manuals included with your AutoTrac Universal  
Steering Kit.  
A—Steering Unit attached in 3 o’clock position  
OUO6050,0001490 –19–24OCT05–1/1  
PC20469 (24OCT05)  
4
Installation Instructions  
102405  
PN=6  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Home Dialysis Equipment PD07X X X User Manual
Intel Computer Hardware IB868 User Manual
Intel Switch 100BASE T4 User Manual
Jacuzzi Hot Tub Y875 RH User Manual
JVC CD Player KD DV5400 User Manual
JVC Stereo System CA NXF3 User Manual
Kambrook Rice Cooker KRC8 User Manual
Kawasaki Sander 840014 User Manual
KitchenAid Ice Maker KUIS155HPB0 User Manual
KitchenAid Range KDRU707 User Manual