1
8
5
–
2
0
0
N
E
T
H
O
R
S
E
P
O
W
E
R
DOZER
J
850J WASTE HANDLER
Download from Www.Somanuals.com. All Manuals Search And Download.
With their full-featured hydrostatic drive-
also have what they need to keep their cool
trains, 850J Waste Handlers deliver in a hostile world. They’re purpose-built to
production-boosting advantages you just be as waste-proof and easy to maintain as
don’t get with other crawlers in this class. possible.With the 850J Waste Handler, you
But powerful performance is just the start of get the productivity and uptime you need
the 850J WH story.These 24-ton workhorses for landfill work.
850J Waste Handler with PAT Blade
WLT undercarriage
185 hp net horsepower
5.57-cu.-yd. capacity
12.7-cu.-yd. capacity with trash rack
47,182-lb. operating weight
LGP undercarriage
200 hp net horsepower
5.87-cu.-yd. capacity
12.9-cu.-yd. capacity with trash rack
48,527-lb. operating weight
Designed and built with extensive input from solid-waste professionals
like you, these crawlers are rugged and reliable performers.
For work in the waste pile, equip your 850J WH with an outside-mount
semi-U blade and optional trash rack.
For cover and slope work with occasional waste-pile use, opt for the
inside-mount PAT blade with optional trash rack.
Download from Www.Somanuals.com. All Manuals Search And Download.
The reversing fan can be set to change direction every 30, 60, or 90
minutes, or activated from the seat as needed. Keeps the engine running
cool and increases productivity.
Variable-speed fan automatically speeds up or slows down, running only
as needed to keep things cool. Improves fuel efficiency and decreases
noise levels, too.
Unitized mainframe with flush-fit bottom guards combines with tight-fitting
side shields to prevent debris from being drawn into the engine compartment.
Generous air intake through the engine compartment slows the velocity
and reduces vacuuming of debris. Right and left side shields open wide
for easy access.
1. With the fan positioned just behind the heavy-duty grille, coolers are less
vulnerable to damage. Split-hinged grille opens wide for convenient clean out.
2. Five-millimeter perforations in the hood and side shields act as a “first
filter,” preventing entry of most airborne debris.
3. Six-fin-per-inch side-by-side radiator and coolers resist clogging and are
easy to clean.
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cool productivity.
These waste handlers are built to run preserve power and precious fuel. The
cool regardless of what’s in the air or fan automatically reverses to help shed
underfoot. Their highly effective cooling waste and debris from cooler cores and
system design employs a hydraulic-
side screens. So your operators can
driven variable-speed fan that helps work hard without breaking a sweat.
PAGES
Download from Www.Somanuals.com. All Manuals Search And Download.
4–5
Unyielding.
You won’t have to worry about these waste even thrive in, the daily grind of landfill work.
handlers getting trashed too soon. Engineers Anything that was susceptible to damage has
started with highly reliable 850J Dozers, then been sealed, rerouted, or re-engineered all in
added what was needed to help them survive, the name of uptime.
PAGES
Download from Www.Somanuals.com. All Manuals Search And Download.
6–7
Four forward and three rear high-intensity halogen work lights are
positioned high for superior illumination.
Lift-cylinder guards keep hydraulic hoses and cylinders out of danger. Blade
hoses are steel-cable supported and Cordura covered for extra protection.
Semi-U blade hoses are routed internally for extra protection and to
prevent snagging.
Air-conditioning condenser is mounted up and away behind the cab for
extra protection and dust reduction.
Cantilevered carrier rollers, recessed segmented sprockets, and trape-
zoidal openings in extreme-duty track shoes help prevent refuse packing.
Uni-body track frames ensure durability. Smooth idler-to-sprocket covers
shed material build-up for easier clean-out.
Sealed electrical center protects fuses, relays, and connections from dirt,
debris, and moisture, ensuring maximum reliability and uptime.
Optional full-width trash rack reduces front-end damage and increases
blade capacity for extra production.
Cab-mounted strobe light is activated whenever the electrical system is
switched on.
The curved shape of the final drive housings resists wrapping and sawing
action of debris.
1. Heavy-duty tank guards help protect the hydraulic, hydrostatic, and
fuel reservoirs. Optional front and rear striker bars help shed material
from the tracks.
2. Unitized mainframe with flush-fit bottom guards forms a smooth
underbelly that doesn’t accumulate or drag trash.
1
Final Drive Protection:
A) Final drive seal guard
B) Final drive seal guard
C) Stepped labyrinth protection
D) Protected final drive seals
C
Bolt-on seal guards and
stepped labyrinth housings
make the final drives virtually
impenetrable. They help mini-
mize downtime and expense
by keeping wire, strapping
tape, metal springs, and other
intrusive contaminants away
from final drive seals.
A
B
2
D
Download from Www.Somanuals.com. All Manuals Search And Download.
Uncover new ways to
keep costs down.
Swing open their hinged side shields and you’ll drivetrain service intervals let you work longer
uncover lots of ways these crawlers help keep between changes. Other uptime-enhancing features
maintenance and daily operating costs to a minimum. include an easy-to-clean undercarriage, quick-to-
Same-side daily service points make quick work replace hydraulic hoses, and designed-in diagnostics,
of the daily routine, and extended engine oil and to list just a few.
1
2
3
4
5
6
1. Operator station tilts a full 70 degrees in only
minutes for wide-open access to internal
components.
2. Common hydraulic and hydrostatic filters
and engine, hydraulic, and transmission oil
simplify service and minimize expense.
3. Fluid sample and remote drive-system test
ports simplify preventative maintenance and
troubleshooting for increased uptime.
4. Advanced in-cab monitor gives easy-to-
understand diagnostic messages for quick
and easy troubleshooting without special tools.
5. Rotary air pre-cleaner ejects dust to
maximize filter life and includes a trash
guard to prevent debris entry.
6. Convenient maintenance and lube chart
provides a quick reference to help ensure
that nothing gets overlooked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Five-hundred-hour engine oil and
2,000-hour transmission and
hydraulic fluid levels increase
uptime, decrease expense.
Hinged bottom guard opens
easily for quick and convenient
clean out.
Greaseless center crossbar pin
joint provides long life with less
maintenance. Lube bank provides
easy access to C-frame pivots.
Separate hydraulic and hydro-
static reservoirs eliminate the
possibility of cross-contamina-
tion. Sight gauges reveal fluid
levels at a glance.
Unlike elevated tracks, Deere’s
heavy-duty sealed and lubricated
Dura-Trax™ undercarriage has
only one wear-causing forward-
travel flex point — for longer life.
Same-side daily service
points make quick work
of the daily routine.
PAGES
Download from Www.Somanuals.com. All Manuals Search And Download.
8–9
Tireless performer.
If you’re looking for a crawler that does more power turns. What’s more, Total Machine
with less effort, you’ll choose a John Deere. Control lets an operator customize machine
The 850J’s hydrostatic system goes beyond the operation and response to personal preferences.
limits of other drivetrains, delivering infinite For nearly tireless operating ease that helps
speed control, power management, and full make big productivity possible.
PAGES
Download from Www.Somanuals.com. All Manuals Search And Download.
10–11
Generous hydraulic
flow and precise
metering ensure
powerful and quick
blade response.
Power management
takes the work out
Spacious, pressurized,
air-conditioned cab
employs two easy-
to-service filters and
numerous directional
vents to deliver a
comfortable work
environment.
Seven-way adjustable
deluxe suspension
armchair provides
plenty of legroom and
daylong comfort.
A convenient 12-volt
port powers cell
phones and other
accessories.
of efficient operation,
automatically powering
up or down as loads
change to maintain
peak engine efficiency.
Ergonomically correct joystick provides intuitive, low-effort
control of steering, forward/reverse travel, and ground speed.
Exclusive TMC lets an operator select decelerator mode and
response, forward/reverse ground-speed ranges, steering
modulation, F-N-R shift rate, and forward/reverse ratios for
one-of-a-kind control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Engine
850J WH WT w/Semi-U Blade / WLT w/PAT Blade 850J WH LGP w/PAT or Semi-U Blade
TM
Manufacturer and Model. . . . . . . . . . . . . . . . . . John Deere PowerTech Plus 6090HT
John Deere PowerTech Plus 6090HT
complies with EPA Tier 3 regulations
6
Non-Road Emission Standards . . . . . . . . . . . . . complies with EPA Tier 3 regulations
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . 550 cu. in. (9.0 L)
Net Power (ISO9249) . . . . . . . . . . . . . . . . . . . . 185 hp (137 kW) @ 1,800 rpm
Net Peak Torque (ISO9249). . . . . . . . . . . . . . . . 611 lb.-ft. (831 Nm) @ 1,500 rpm
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and oil-to-water
cooler
550 cu. in. (9.0 L)
200 hp (151 kW) @ 1,800 rpm
675 lb.-ft. (915 Nm) @ 1,500 rpm
pressure system with full-flow spin-on filter and oil-to-water
cooler
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual-stage dry type with tangential unloader
dual-stage dry type with tangential unloader
Cooling
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . variable-speed, thermostatically controlled; hydraulically driven with auto reverser on selectable timer or activated by a switch
in the cab
Engine Coolant Rating. . . . . . . . . . . . . . . . . . . . – 34 deg. F (– 37 deg. C)
– 34 deg. F (– 37 deg. C)
Powertrain
Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . automatic, dual-path, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing load
conditions; each individually controlled track is powered by a variable-displacement piston pump and motor combination;
ground-speed selection buttons on single-lever steering and direction control; independently selectable reverse speed ratios
80%, 100%, 115%, or 130% of forward ground speed; decelerator pedal controls ground speed to stop
System Relief Pressure. . . . . . . . . . . . . . . . . . . 6,650 psi (45 850 kPa)
Filter, Charge Oil . . . . . . . . . . . . . . . . . . . . . . . . 10 micron
Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . oil-to-air
6,650 psi (45 850 kPa)
10 micron
Travel Speeds (forward and reverse). . . . . . . . . 6.3 mph (10 km/h)
6.3 mph (10 km/h)
Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single-lever steering, speed, direction control, and counterrotation; full power turns and infinitely variable track speeds provide
unlimited maneuverability and optimum control; hydrostatic steering eliminates steering clutches and brakes
Final Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . double-reduction planetary final drives transfer torque loads over three gear sets; mounted independently of track frames and
dozer push frames for isolation from shock loads
Total Ratio . . . . . . . . . . . . . . . . . . . . . . . . . 44.7483 to 1
Drawbar Pull
44.7483 to 1
Maximum. . . . . . . . . . . . . . . . . . . . . . . 77,300 lb. (344 kN)
@ 1.2 mph (1.9 km/h) . . . . . . . . . . . . . 37,500 lb. (167 kN)
@ 2.0 mph (3.2 km/h) . . . . . . . . . . . . . 27,000 lb. (120 kN)
77,300 lb. (344 kN)
40,000 lb. (178 kN)
29,500 lb. (131 kN)
Service Brakes . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic (dynamic) braking stops the machine when the direction/steering control lever is moved to neutral or the decelerator
is depressed to the end of travel
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic
Parking Brakes . . . . . . . . . . . . . . . . . . . . . . . . exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, the decelerator is depressed to the end
of travel, or the park lock lever is placed in the start or neutral positions and motion is detected; machine cannot be driven with
brake applied, reducing wear-out or need for adjustment; spring-applied, hydraulic release
PAGES
12–13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hydraulics
850J WH WT w/Semi-U Blade / WLT w/PAT Blade / LGP w/PAT or Semi-U Blade
Load sense, piston pump
Pump (74 cc) . . . . . . . . . . . . . . . . . . . . . . . . . . 46 gpm (174 L/min.)
System Relief Pressure. . . . . . . . . . . . . . . . . . . 3,625 psi (24 993 kPa)
Differential Pressure. . . . . . . . . . . . . . . . . . . . . 275 psi (1896 kPa)
Filter, Return Oil . . . . . . . . . . . . . . . . . . . . . . . . 10 micron
Maximum Flow @ Unloaded High Idle . . . . . . . 43 gpm (163 L/min.)
Control
Outside Dozer. . . . . . . . . . . . . . . . . . . . . . . T-bar hydraulic-pilot two-function joystick
PAT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T-bar hydraulic pilot two-function joystick with push-button angle function
Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . convective oil sump
Electrical
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . 950 CCA
Reserve Capacity . . . . . . . . . . . . . . . . . . . . . . . 190 min.
Alternator Rating (cab) . . . . . . . . . . . . . . . . . . . 80 amp
Waste-Handler Dozer Lights . . . . . . . . . . . . . 7 total: cab roof mounted (4), cab rear mounted (1), grille or lift cylinder mounted (2), and rear reflectors (2)
Undercarriage
850J WH WT w/Semi-U Blade / WLT w/PAT Blade 850J WH LGP w/PAT or Semi-U Blade
Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John Deere Dura-Trax™ features deep-heat-treated, sealed, and lubricated track links and through-hardened, sealed, and
lubricated rollers for maximum wear resistance; sprockets are segmented
WT with semi-U blade
Track Gauge for WT Waste Handler. . . . . . . . . . 6 ft. 8 in. (2032 mm)
Grouser Width (single bar, open center) . . . 30 in. (762 mm)
Shoes (each side). . . . . . . . . . . . . . . . . . . . 40
WLT with PAT blade
7 ft. 4 in. (2235 mm)
30 in. (762 mm)
45
LGP with PAT blade
7 ft. 10 in. (2388 mm)
36 in. (914 mm)
45
LGP with semi-U blade
7 ft. 2 in. (2184 mm)
36 in. (914 mm)
45
Track Rollers (single flange, each side). . . . 7
8
8
8
Track Length on Ground . . . . . . . . . . . . . . . 9 ft. 1 in. (2769 mm)
10 ft. 9 in. (3284 mm)
10 ft. 9 in. (3284 mm)
10 ft. 9 in. (3284 mm)
2
2
2
2
Ground Contact Area. . . . . . . . . . . . . . . . . . 6,540 sq. in. (42 193 cm )
Ground Pressure. . . . . . . . . . . . . . . . . . . . . 6.83 psi (47.1 kPa)
Track Pitch . . . . . . . . . . . . . . . . . . . . . . . . . 8 in. (203 mm)
Oscillation at Front Roller . . . . . . . . . . . . . . ± 4.5 in. (± 114 mm)
7,758 sq. in. (50 052 cm )
6.11 psi (42.2 kPa)
8 in. (203 mm)
9,310 sq. in. (60 064 cm )
5.15 psi (35.5 kPa)
8 in. (203 mm)
9,310 sq. in. (60 064 cm )
5.16 psi (35.6 kPa)
8 in. (203 mm)
± 6.5 in. (± 166.5 mm)
± 6.6 in. (± 168 mm)
± 6.6 in. (± 168 mm)
Serviceability
Refill Capacities*
850J WH WT w/Semi-U Blade / WLT w/PAT Blade / LGP w/PAT or Semi-U Blade
Fuel Tank with Lockable Cap . . . . . . . . . . . 98 gal. (371 L)
Cooling System with Recovery Tank . . . . . . 9.2 gal. (35 L)
Engine Oil with Filter . . . . . . . . . . . . . . . . . 7 gal. (26 L)
Transmission Reservoir with Filter . . . . . . . 27.9 gal. (106 L)
Hydrostatic Reservoir and Filter . . . . . . . . . 27.9 gal. (106 L)
*Please follow drain and refill procedures and volumes listed in the operator’s manual.
Operating Weights
850J WH WT w/Semi-U Blade / WLT w/PAT Blade 850J WH LGP w/PAT or Semi-U Blade
With Waste-Handling Package, Blade with
Trash Rack, Full Fuel Tank, and 175-lb.
(79 kg) Operator. . . . . . . . . . . . . . . . . . . . . WT with semi-U blade
With Extreme-Duty Shoes With Trape-
zoidal Holes
WLT with PAT blade
LGP with PAT blade
LGP with semi-U blade
48,796 lb. (22 133 kg)
30 in. (762 mm) . . . . . . . . . . . . . . . . . . 44,665 lb. (20 260 kg)
36 in. (914 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48,906 lb. (22 183 kg)
47,432 lb. (21 515 kg)
Blade With Trash Rack and Push-
Beam Weights
Including Straight End Bits . . . . . . . 7,486 lb. (3396 kg)
C-Frame Assembly with Cylinder. . . N/A
N/A
N/A
7,644 lb. (3467 kg)
N/A
7,024 lb. (3186 kg)
7,198 lb. (3265 kg)
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Weights (continued)
Optional Components (add or subtract
from base weight)
850J WH WT w/Semi-U Blade / WLT w/PAT Blade 850J WH LGP w/PAT or Semi-U Blade
WT with semi-U blade
WLT with PAT blade
– 482 lb. (– 218.6 kg)
– 148 lb. (– 67.1 kg)
LGP with PAT blade
LGP with semi-U blade
22-in. (560 mm) Extreme-Duty. . . . . . . . . . . . . – 482 lb. (– 218.6 kg)
24-in. (610 mm) Extreme-Duty. . . . . . . . . . . . . – 148 lb. (– 67.1 kg)
30-in. (760 mm) Extreme-Duty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1,102 lb. (– 500 kg)
– 1,102 lb. (– 500 kg)
498 lb. (225.9 kg)
Trash Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455 lb. (206.4 kg)
Striker Bars
436 lb. (197.8 kg)
462 lb. (209.6 kg)
Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 lb. (111.1 kg)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 lb. (166 kg)
Air Pre-Cleaner
160 lb. (72.6 kg)
171 lb. (77.6 kg)
160 lb. (72.6 kg)
171 lb. (77.6 kg)
325 lb. (147.4 kg)
171 lb. (77.6 kg)
Powered Cab . . . . . . . . . . . . . . . . . . . . . . . 47 lb. (21.3 kg)
Dual-Stage Engine . . . . . . . . . . . . . . . . . . . 13 lb. (5.9 kg)
Retrieval Hitch . . . . . . . . . . . . . . . . . . . . . . . . . 114 lb. (52 kg)
Drawbar (extended rigid) . . . . . . . . . . . . . . . . . 286 lb. (130 kg)
Screens
47 lb. (21.3 kg)
13 lb. (5.9 kg)
114 lb. (52 kg)
286 lb. (130 kg)
47 lb. (21.3 kg)
13 lb. (5.9 kg)
114 lb. (52 kg)
286 lb. (130 kg)
47 lb. (21.3 kg)
13 lb. (5.9 kg)
114 lb. (52 kg)
286 lb. (130 kg)
Front and Door . . . . . . . . . . . . . . . . . . . . . . 175 lb. (79 kg)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 lb. (34 kg)
Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 lb. (54 kg)
Condenser Guard . . . . . . . . . . . . . . . . . . . . . . . 121 lb. (55 kg)
Limb Risers . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 lb. (272 kg)
Counterweight
175 lb. (79 kg)
75 lb. (34 kg)
120 lb. (54 kg)
121 lb. (55 kg)
600 lb. (272 kg)
175 lb. (79 kg)
75 lb. (34 kg)
120 lb. (54 kg)
121 lb. (55 kg)
600 lb. (272 kg)
175 lb. (79 kg)
75 lb. (34 kg)
120 lb. (54 kg)
121 lb. (55 kg)
600 lb. (272 kg)
Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 875 lb. (397 kg)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990 lb. (449 kg)
875 lb. (397 kg)
990 lb. (449 kg)
875 lb. (397 kg)
990 lb. (449 kg)
875 lb. (397 kg)
990 lb. (449 kg)
Machine Dimensions
WT with semi-U blade
WLT with PAT blade
10 ft. 5 in. (3175 mm)
LGP with PAT blade
10 ft. 5 in. (3175 mm)
LGP with semi-U blade
10 ft. 5 in. (3175 mm)
A
B
Overall Height to Roof. . . . . . . . . . . . . . . . . 10 ft. 5 in. (3175 mm)
Tread Depth with Extreme-Duty Single-
Bar Grousers . . . . . . . . . . . . . . . . . . . . 2.8 in. (71 mm)
2.8 in. (71 mm)
2.8 in. (71 mm)
2.8 in. (71 mm)
C
Ground Clearance with Grousers
(excludes grouser height) . . . . . . . . . . . 16.1 in. (409 mm)
16.1 in. (409 mm)
16.1 in. (409 mm)
16.1 in. (409 mm)
With Trash Rack
D
E
Blade Width . . . . . . . . . . . . . . . . . . . . . . . . 11 ft. 8 in. (3556 mm)
Blade Height
With Trash Rack . . . . . . . . . . . . . . . . . . . . . 6 ft. 6 in. (1981 mm)
Without Trash Rack. . . . . . . . . . . . . . . . . . . 4 ft. 6 in. (1374 mm)
13 ft. 2 in. (4013 mm)
14 ft. 0 in. (4267 mm)
12 ft. 8 in. (3861 mm)
6 ft. 0 in. (1829 mm)
4 ft. 0 in. (1229 mm)
6 ft. 0 in. (1829 mm)
4 ft. 0 in. (1229 mm)
6 ft. 4 in. (1930 mm)
4 ft. 4 in. (1321 mm)
F
G
H
I
J
K
L
Blade Lift Height. . . . . . . . . . . . . . . . . . . . . 3 ft. 9 in. (1151 mm)
Blade Digging Depth. . . . . . . . . . . . . . . . . . 23.6 in. (599 mm)
Blade Tilt (uses tilt jack) . . . . . . . . . . . . . . . 29.6 in. (752 mm)
Overall Length with Blade. . . . . . . . . . . . . . 17 ft. 8 in. (5385 mm)
Overall Width with Blade Angled. . . . . . . . . N/A
3 ft. 6 in. (1072 mm)
27.7 in. (704 mm)
21.2 in. (538 mm)
18 ft. 10 in. (5728 mm)
9 ft. 6 in. (2896 mm)
23.8 deg.
3 ft. 6 in. (1072 mm)
28 in. (704 mm)
23 in. (572 mm)
18 ft. 10 in. (5728 mm)
12 ft. 10 in. (3901 mm)
23.8 deg.
3 ft. 9 in. (1151 mm)
24 in. (599 mm)
34 in. (853 mm)
19 ft. 6 in. (5944 mm)
N/A
Blade Angle . . . . . . . . . . . . . . . . . . . . . . . . N/A
Cut Reach. . . . . . . . . . . . . . . . . . . . . . . . . . N/A
N/A
N/A
5.7 in. (145 mm)
4.3 in. (158 mm)
M
Width Over Track . . . . . . . . . . . . . . . . . . . . 9 ft. 2 in. (2794 mm)
9 ft. 10 in. (2997 mm)
10 ft. 10 in. (3302 mm)
10 ft. 2 in. (3099 mm)
Blade Capacity
3
3
3
3
With Trash Rack . . . . . . . . . . . . . . . . . . . . . 14.5 cu. yd. (11.09 m )
Without Trash Rack. . . . . . . . . . . . . . . . . . . 7.62 cu. yd. (5.82 m )
12.7 cu. yd. (9.71 m )
12.9 cu. yd. (9.86 m )
15.2 cu. yd. (11.62 m )
7.8 cu. yd. (5.96 m )
3
3
3
3
5.57 cu. yd. (4.26 m )
5.87 cu. yd. (4.49 m )
PAGES
14–15
Download from Www.Somanuals.com. All Manuals Search And Download.
E
A
C
F
H
G
Standard Drawbar
D
B
Extended Drawbar
I
K
L
M
J
Cast Reach
850J WH WT w/Semi-U Blade / WLT w/PAT Blade / LGP w/PAT or Semi-U Blade
Rear Ripper
Parallelogram ripper with hydraulic pitch adjustment and ESCO ripper tips, multi-shank (3)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,480 lb. (2032 kg)
N
O
P
Maximum Penetration . . . . . . . . . . . . . . . . . 28.5 in. (724 mm)
Maximum Clearance Under Tip . . . . . . . . . . 24 in. (610 mm)
Overall Length (lowered position). . . . . . . . . 5 ft. 4 in. (1626 mm)
P' Overall length (raised position). . . . . . . . . . . 5 ft. 0 in. (1524 mm)
Q
R
S
T
Overall Beam Width . . . . . . . . . . . . . . . . . . . 7 ft. 10.5 in. (2400 mm)
Slope Angle (full raise) . . . . . . . . . . . . . . . . . 24 deg.
Ripping Width. . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 0.5 in. (2146 mm)
Distance Between Shanks . . . . . . . . . . . . . . 3 ft. 5 in. (1041 mm)
Number of Teeth. . . . . . . . . . . . . . . . . . . . . . . . 3
T
T
S
Q
O
N
R
'
P
P
Download from Www.Somanuals.com. All Manuals Search And Download.
850J WH WASTE HANDLER
Key: ● Standard equipment ▲ Optional or special equipment
*See your John Deere dealer for further information.
Base Landfill
850J Package Attachments
Base Landfill
850J Package Engine
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
Retrieval hitch with pin
●
●
●
●
●
▲
▲
▲
●
●
●
●
●
▲
▲
●
Certified to EPA Tier 3 emissions
Extended rigid drawbar with pin for pull-type implements
Counterweight, rear, 720 lb. (327 kg)
Counterweight, rear, 1,000 lb. (454 kg)
Ripper, rear, three shank
Cab screens
Undercarriage
Oscillating undercarriage with remote lube
Full-length, smooth-surface track frame covers
Guides, front and rear, with bolt-on wear strips
Segmented sprockets
Double-flange rollers
Maintenance-free center crossbar pivot
Electronic control with automatic engine protection
Dual safety element dry-type air cleaner, evacuator valve
Muffler, self draining, under hood, with vertical stack
Environmental service drains
Ether start aid
Chrome exhaust
Rotary ejector engine air precleaner
Cooling
●
●
●
●
●
●
●
●
●
●
●
●
▲
●
●
●
●
●
●
▲
●
●
●
●
●
●
●
●
Cooling fan, suction type, programmable reversing
Engine coolant radiator (6 fins per in.)
Hydrostatic cooler (oil/air – 6 fins per in.)
Hydraulic cooler (oil/air – 6 fins per in.)
Enclosed safety fan guard (conforms to SAE J1308 and ISO3457)
Perforated engine side shields
Split-hinge bar-type grille
Extreme-duty grille
Transmission
Diagnostic test ports
Environmental service drains
Final-drive seal guards
Onboard diagnostics
Hydraulic System
Two-function hydraulics
Three-function hydraulics
Four-function hydraulics with rear plumbing
Electrical
Sealed alternator, 80 amps
Master electrical disconnect switch
Lights, grille or lift cylinder mounted (2) and rear mounted (1)
Work lights (4), cab roof mounted
Mainframe, Access Panels
Tilt operator station transmission access
Front tow loop
Integral bottom protection
Bottom access covers (bolt-on, 6 total, 5 swing away)
Vandal protection: Engine access door / Side tank access doors / Fuel
tank / Instrument panel / Transmission reservoir / Hydraulic reservoir
Operator’s Station
▲
●
●
●
●
●
●
●
▲
●
●
●
▲
●
▲
▲
▲
▲
Cab with roof-mounted air conditioner (24,000 BTU) and heater
Left and right quarter hinged windows
Tinted safety glass
Dome light
Fresh-air-intake heater/defroster
Windshield wiper/washers (3) for windshield and doors
Mechanical suspension high-back fabric seat
Air suspension high-back fabric seat
3-in. (76 mm) retractable seat belt
Backrest tilt, thigh support, lumbar, height, weight, and fore-aft positioning
Power port, 12 volt
Second power port
Lockable dash-mounted storage compartment
Rear wiper, two speed
AM/FM weather-band radio and digital clock
External mounted attachment mirror
JDLinkTM
Landfill Configuration
Tank guards
●
●
▲
●
●
●
●
●
▲
●
●
●
▲
●
▲
▲
▲
▲
●
▲
▲
●
▲
▲
●
●
●
▲
●
●
●
●
▲
▲
●
●
▲
●
▲
▲
●
●
●
●
●
●
●
●
●
●
Lift-cylinder hose guards
Blade trash rack
Beacon
30-in. (762 mm) extreme-service shoes with trapezoidal holes
36-in. (914 mm) extreme-service shoes with trapezoidal holes
▲
▲
▲
CONTROL OWNING AND OPERATING COSTS
Customer Personal Service (CPS) is part of John Deere’s proactive, fix-before-fail
strategy on machine maintenance that will help control costs, increase profits, and
reduce stress. Included in this comprehensive lineup of ongoing programs and
services are:
Fluid analysis program – tells you what’s going on inside all of your machine’s
major components so you’ll know if there’s a problem before you see a decline in
performance. Fluid analysis is included in most extended coverage and preventive-
maintenance agreements.
Component life-cycle data – gives you vital information on the projected life
span of components and lets you make informed decisions on machine maintenance
by telling you approximately how many hours of use you can expect from an engine,
transmission, or hydraulic pump. This information can be used to preempt catastrophic
downtime by servicing major components at about 80 percent of their life cycle.
Preventive Maintenance (PM) agreements – give you a fixed cost for maintain-
ing a machine for a given period of time. They also help you avoid downtime by ensur-
ing that critical maintenance work gets done right and on schedule. On-site preventive
maintenance service performed where and when you need it helps protect you from
the expense of catastrophic failures and lets you avoid waste-disposal hassles.
Extended coverage – gives you a fixed cost for machine repairs for a given period
of time so you can effectively manage costs. Whether you work in a severe-service
setting or just want to spread the risk of doing business, this is a great way to custom-
fit coverage for your operation. And an extended coverage contract also travels well
because it’s backed by John Deere and is honored by all Deere construction dealers.
Customer Support Advisors (CSAs) – Deere believes the CSA program lends a
personal quality to Customer Personal Service (CPS). Certified CSAs have the knowledge
and skills for helping make important decisions on machine maintenance and repair.
Their mission is to help you implement a plan that’s right for your business and take
the burden of machine maintenance off your shoulders.
Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and
cooling fan at test conditions per ISO9249. No derating is required up to 10,000-ft. (3050 m) altitude.
Specifications and design subject to change without notice. Wherever applicable, specifications are
in accordance with SAE standards. Except where otherwise noted, these specifications are based
on a unit with cab, waste-handling package, full fuel tank, 175-lb. (79 kg) operator, and standard
equipment; 140-in. (3556 mm) outside-mount semi-U blade or 158-in. (4013 mm) PAT blade.
DKA850JWH Litho in U.S.A. (07-04)
Download from Www.Somanuals.com. All Manuals Search And Download.
|