DOCKING DIGITAL MUSIC SYSTEM FOR iPod®
OWNER'S MANUAL
JiMS-125
(iPod® Not Included)
PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR JENSEN CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is only
the start of your musical enjoyment. Now it's time to consider how you can
maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by playing
it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your
sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to
higher volumes of sound. So what sounds "normal" can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly,
and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in
the future. After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic Industries Association's
Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise.
Customer's Record:
The serial number of this product is found on its bottom cover. You should
note the serial number of this unit in the space provided as a permanent
record of your purchase to aid in identification in the event of theft of loss.
Model Number: JiMS-125
Serial Number:
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
1.Water and Moisture
The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a set basement.
2.Ventilation
The unit should be situated so that its location or position does not interfere
with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface
that may block the ventilation openings. Also, it should not be placed in a
built-in installation, such as a bookcase or cabinet, which may impede the
flow of air through the ventilation openings.
3.Heat
The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that
produce heat.
4.Power Source
The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
5.Power Cord Protection
Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is always
best to have a clear area from where the cord exits the unit to where it is
plugged into an AC outlet.
6.Cleaning
The unit should be cleaned only as recommended. See the section “Care
and Maintenance” of this manual for cleaning instructions.
7.Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
8.Attachments
Do not use attachments not recommended by the product manufacturer.
9.Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect during these periods
of time. This will prevent damage to the product due to lightning and power-
line surges.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Overloading
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
11.Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate
normally.
12.Antenna
Do not connect an external antenna to the unit (other than that provided).
13.Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a
month or longer, the power cord should be unplugged from the unit to
prevent damage or corrosion.
14.Servicing
The user should not attempt to service the unit beyond those methods
described in the user's operating instructions. Service methods not
covered in the operating instructions should be referred to a qualified
service personnel.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
In accordance with FCC requirements, changes or modifications to this unit
not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
JiMS-125 is aniPod Docking MusicSystem which incorporatesthe
following features :
• iPod , iPodmini, iPod classic, iPod touch andiPod nano Player/
Re-charger
• AM /FM Stereo receiverwith digital readout on LCD
• Audio line-infor connecting otherdigital audio player
• Clock andAlarm timer function
• Wake up to Alarm(Buzzer), iPod orRadio with Snoozefunction
• Built-in 2 HighFidelity Speakers
• Attached FMAntenna wirefor better radioreception
• Stereo Headphone jackconnection for privatelistening
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Clock setting batteryback-up
The battery back-upcompartment is locatedon the backof the unit.
(1) Remove thebattery compartment door.
(2) Follow thepolarity diagram showninside the compartmentand
install 2 xAAA batteries (not included).
(3) Replace thebattery compartment door.
WARNING:
- Be surethat the batteriesare installed correctly. Wrong polarity may
damage the unit.
- Do notmix old andnew batteries.
- Do notmix alkaline, standard(carbon-zinc) or rechargeable(nickel-
cadmium) batteries.
- Only batteriesof the sameor equivalent typeas recommend areto be
used.
- If theunit is notto be usedfor an extendedperiod of time, remove the
battery.
- Do notdispose of batteriesin fire, batteriesmay explode orleak.
AC-DC Adaptor Connection
The unit ispowered by anexternal AC-DC PowerAdaptor with an
output of 10VDC 1000mA( included) .
(1) Firmly andsecurely plug theadaptor's ACplug intoAC main outlet.
(2) Insert theadaptor's DC outputplug into theDC -IN jackon the back
of the unit.
NOTE: This unit is not magneticallyshielded and maycause color
distortion on thescreen of someTVs or video monitors. To avoid this,
you may needto move theunit further awayfrom the TV or monitorif
unnatural color shiftsor image distortionoccurs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
Main Unit
Top view
2
Front view
1
3
5
4
6
14
14
13
8
9
12
7
11 10
Rear view
15
20
21
16171819
1. iPod docking station
2. iPod docking connector
3. Function switch : Power Off ; select RADIO / iPOD / AUX modes.
4. Band switch : Select between FMSTEREO / FM(mono) /AM
5. VOLUME knob : Adjusts the volumelevel up ordown.
6. TUNING knob : Adjusts the radiochannel frequency upor down.
7. SNOOZE button : Activate the snooze function.
8. TIME SET
9. ALARM SET
button : Select clock setting mode; iPod play/pause.
button : Select alarm time setting mode.
10.
11.
Button : Set Hour value of Clock and Alarm time; In iPod mode,
skip tracks or perform high-speed search forward.
Button : SetMinute value ofClock and Alarm time; IniPod
mode, skip tracksor perform high-speedsearch backward.
12. ALARM ON / OFFbutton : Switchthe alarm onor off.
13. LCD display
14. Pair ofSpeakers
15. ALARM wake to switch: Alarmsource Buzzer /iPod / Radio
selection
16. AUX IN jack :Auxiliary audio signalinput
17. Phones Jack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
18. DC-in jack : For the connection of external DC power supply
19. FM Antenna wire
20. Battery Compartment
21. RESET button : Reset the unit.
LOCATION OF CONTROLS
Remote Control (foriPod only)
1
2
3
4
1. Infra-red Transmitter
2. iPod PLAY / PAUSE
button
3.
/
button ----- IniPod mode, skip tracks or perform
high-speed search.
4. Battery Compartment
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK SETTING
Setting Clock Time
1. With theunit powered off, press &hold the TIME SET
button
(MINUTE)buttons to adjustthe clock
then press the
time.
2. Afterthe clock timeis set, releasethe TIME SET
(HOUR) /
button.
ALARM OPERATIONS
Setting Alarm Time
1. With theunit powered off, press &hold the ALARM SET
to displayAlarm time, thealarm indicator flasheson LCD; then
press the (HOUR)/ (MINUTE) buttonsto set thealarm time.
2. Afterthe alarm timeis set, releasethe ALARM SET button.
button
3. Slide theALARM wake to switchto select desiredalarm sound
source.
(a) Wake to Buzzer ;
(b) Wake to iPod -----Ensure the iPodis docked. Selectthe song or
playlist you wishto be wokenup to.
(c) Wake to Radio -----Ensure the desiredradio channel istuned.
4. Press theALARM ON /OFF button to enablethe alarm function.
The alarm indicator stays onLCD display.
5. If youselected “Wake to iPod” or“Wake to Radio”.
Adjust to a desired alarm volume level by rotating the VOLUME knob.
Wake to Buzzer
When the desiredalarm time isreached, the Buzzerwill sound forone
hour.
Wake to iPod
When the desiredalarm time isreached, the iPod willbegin playing for
one hour.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Wake to Radio
If the BAND switch is set to FM or AM mode then the radio will turn on
and play for one hour when the desired alarm time is reached.
Caution:
The clock and alarm settings may be affected/lost if the AC adaptor
is unplugged or if you experience a power outage. Please make sure
to check both clock and alarm time settings if the power to the unit is
interrupted at any time and reset if necessary.
Snooze Funtion
- You can activate the Snooze function manually after the alarm sounds
by pressing the SNOOZE button once. Alarm will sound again in 5
minutes and snooze can be manually activated again within 1 hour
from the original wake time.
- After the alarm sounds you can also press the ALARM ON / OFF
button to stop it immediately. The alarm will activate again once the
preset alarm time is reached the next day.
Note: Your iPod must be properly docked in order for the wake to iPod
function to work properly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
Radio Operation
Unwrap and fully extend the FM Antenna wire for the best reception.
1. Slide the FUNCTION switch to RADIO mode.
2. Slide the BAND switch to select FM Stereo / FM or AM band.
3. Rotate the TUNING knob and tune to a desired station.
4. Adjust the sound level by rotating the VOLUME knob.
NOTE: The iPod may cause interference to the AM reception if it is
docked and turned ON.
You should turn off the iPod manually or remove it from the
unit for better reception.
Tips for the Best Reception
To obtain the best AM reception, slightly rotate the unit until the clearest
signal is received or place it near a window.
To obtain the best FM reception, fully extend the FM Antenna and adjust
its direction.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod DOCKING
If the docking port will not be used for an extended period of time, it is
recommended to cover the docking port by using the “Dock Cover” insert
(included).
1. Use the iPod adaptor included in your iPod and insert it into the docking
area. Your iPod can now be inserted into the docking port by placing the
connector on the bottom of the iPod onto the connector in the docking
bay.
2. Insert youriPod with its Connector faced downward and directly over
the Dock connector on the unit.
Note: Please be careful when seating the iPod into the docking to
avoid damaging the 30-pin connector on the iPod or in the
docking system.
3. Slide the FUNCTION switch to select iPOD mode. The iPod will
start playing automaticallyand starts chargingimmediately.
4. Press the PLAY/PAUSE
button to pause or resume iPod playback.
5. Rotate the VOLUME knob on this unit to adjust your desired volume
level.
Note : The Volume level cannot be adjusted by the volume
control of your iPod after being docked.
6. Your iPod is charging even during playback.
Note:The recharge function operates in iPod and AUX mode only.
7. To remove the iPod from the unit, press and hold the PLAY/PAUSE
button for three seconds to switch off the device and then gently
remove it from the docking connector.
iPod playback control:
- Press the PLAY/PAUSE
playback;
button to pause or resume the iPod
- Press the iPod Skip/Search Forward
to the next or previous song;
or Backward
button to skip
- Press and hold the iPod Skip/Search Forward or Backward button
forfast-forwarding orfast-rewinding duringplayback.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AUXILIARY INPUT
The unit provides the auxiliary audio signal input for the connection of an
external audio device. You may connect an audio cable with 3.5 mm stereo
plug (not included) to the AUX IN Jack located at rear of the unit. Connect the
other end of the cable to a Line Out Jack or Headphone Jack of your
non-dockable MP3 player, CD player and other, non-dockable iPods then listen
to your external source through the speakers of this system.
1. Connect an audio cable with 3.5 mm stereo plug to the AUX IN Jack
located at rear of the unit.
2. Connect the other end of the cable to a Line Out Jack or Headphone Jack
of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, slide the FUNCTION switch to AUX position.
5. The volume level can now be controlled through the main unit.
Operate all other functions on the auxiliary device as usual.
NOTE:
(1) If you connected the Line Out Jack of your external device then you only
need to adjust the volume control of this unit. If you connected the
Headphone Jack of your external device then you may need to adjust both
the volume control of your external device and the volume control of this
unit to find the most desirable volume setting.
(2) Slide the FUNCTION switch to OFF position turning off the unit when you
finish listening.
Don't forget to switch off the power of your external device as well.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
• Do not subject the unit to excessive force, shock, dust or extreme temperature.
• Do not tamper with the unit's internal components.
• Clean your unit with a damp (never wet) cloth. Solvents or detergents should
never be used.
• Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
• Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps ormotors.
Resetting the Unit
If the unit is subjected to a severe power surge or electric shock, it is possible
that the internal microcontroller may “lock up” and the unit will not respond to
any commands from the top panel controls.
1. In this event, unplug and then reconnect the AC power plug into the wall
outlet.
2. Use a straightened paper clip, toothpick, or similar blunt object to press the
RESET button located at rear of the main unit (see figure below).
The reset operation clears the system memory and all of your previous
settings will be erased.
Caution: DO NOT use a sharp, pointed object to press the RESET button.
It may damage the reset switch inside the unit.
RESET button
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
AC Adaptor is not plugged into a
wall outlet or the connector is not
plugged into the power supply jack
on the back of the unit.
Plug the AC adaptor into a wall
outlet and plug the connector into
the supply jack on the unit.
The unit does
not respond (no power)
Plug another device into the same
outlet to confirm the outlet is working.
Wall outlet is not functioning.
Using no/wrong iPod Adaptor.
iPod does not install properly.
Make sure the dock insert is the
proper fit for your iPod.
iPod does not
dock properly
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod is not installed properly.
Your iPod is locked up.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it on the dock.
iPod does not respond
to the speaker system
Please make sure that your iPod is
working properly before docking into
the unit. Please refer to your iPod
manual for details.
iPod is not installed properly.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod does not
charge up
iPod is locked up/ frozen.
iPod battery has problem.
Please make sure your iPod is
working properly before docking into
the unit. Please refer to your iPod
manual for details.
The reception at the set location is
poor.
Slightly rotate the unit for the best
reception.
AM band is too noisy
Volume level is set too high.
Sound source is distorted.
This is normal.
Decrease the volume.
If the iPod original sound source is of
poor quality, distortion and noise are
easily noticed with high-power
speakers. Try a different audio source
such as a music CD.
Sound is distorted
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on the
device itself. Also try turning bass
boost OFF or change the EQ setting.
Unit gets warm after
extended play at
high volume
Turn the unit off for a period of time or
lower volume.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power Requirement
Main unit
DC input:
Battery back up for clock:
Remote Control
DC10V, 1000mA
2 X DC1.5V 'AAA' (UM-4) Batteries
1 X CR2032 Lithium Battery
Frequency Range
Radio
AM 530 -1710 kHz
FM 88 -108 MHz
SERVICE
Please refer to the instructions on the enclosed warranty card for returning
your unit for service. When returning the unit, please remove batteries to
prevent damage to the unit in transit and/or from possible leakage.
We are not responsible for batteries returned with the product or for the cost
of replacement.
Distributed by:
SPECTRA Merchandising International, Inc.
Chicago Industry Tech Park
4230 North Normandy Avenue
Chicago, IL 60634, U.S.A.
Please have model number ready, for Customer Service, call 1-800-777-5331.
*The specification and external appearance of the set are subject to change
without prior notice.*
17
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|