ELECTRIC DOWNDRAFT COOKTOP
PRODUCT DIMENSIONS
Q
P
INCHES
CENTIMETERS
73.7 .2
53.3 .2
23.8
1
A
29
21
/16
1
/16
B
3
C
D
F
9 /8
9
7 /16
19.2
13
33.0
7
G
H
J
1 /8 min
4.8 min
34.8 min
34.9
A
13
13 /16 min
C
B
3
13 /4
G
13
11 /16
D
K
30.0
F
L2
M
N3
P
2 min
5.1 min
8.9
1
3 /2
1
6 /4 min
15.9 min
76.2
30
3
Q
21 /4
55.2
MODEL SKUs
4
JED8130ADB
JED8130ADW
M
N
H
K
L
J
Style of product may vary from picture
NOTES:
1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)
is required to sidewalls and 3/4" (1.9cm) to rear wall.
2. Provide 2" minimum (5.1 cm) cabinet clearance to motor for cooling purpose.
3. Provide 6 1/4" minimum (15.9 cm) required for removal of (supplied) grease container(s).
Installed dimension for (supplied) grease container(s) is 5 1/2" (14.0 cm)
4. Grills installed near a side wall must allow a minimum clearance of 6" (15.2 cm) between cooktop and side wall
for maximum performance.
5. Vents up to 60 equivalent feet.
6. This appliance has been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194 F. If these appliances are installed with cabinets
˚
that have a lower working temperature than 194 F, discoloration, delamination or melting may occur.
˚
Electrical requirements: Provide for 120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected
and wired according to local electrical codes.
Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|