45231
Home Monitoring
Wired Color
Camera
User Manual
For indoor/outdoor use. Do not use in wet locations.
1-800-654-8483
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CHOOSING A CAMERA MOUNTING LOCATION
The 45231 Color Camera can be positioned on
a desktop, or mounted to a wall. It is suitable for
indoor or outdoor use. When choosing a mounting
location, please be advised:
• Do not use in wet locations. If using outdoors,
position in sheltered location.
• DO NOT position the camera so that it points
directly into the sun or any bright light, as this
may cause damage to the camera.
• Avoid viewing areas where half the area is in
bright sunlight and the other half is dark, such
as in the shadow of a building. All types of
cameras have difficulty “seeing” into areas of
such divergent light levels.
• In low light conditions, the camera will
automatically activate the Infrared (IR) LED’s
and switch the camera to Night Vision mode.
Night Vision viewing distance is up to 10 feet.
TESTING THE SYSTEM
Before beginning installation, we recommend that
you connect the 45231 Color Camera to your TV,
VCR or DVR to help you familiarize yourself with the
camera system and choose the best location for
installing the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
CONNECTING TO A TV
The 45231 connects to the video and audio input
jacks on the back of your TV, VCR or DVR. If you are
not using a VCR or DVR, connect the 45231 Color
Camera to your TV as shown below.
TV
Power
Video In
Audio In
To view:
1. Switch on the TV; set the volume to midpoint.
Connect to the 45231 Color Camera.
Note: For temporary installation you can connect the camera
to the TV, VCR or DVR without using the 60 ft. extension cable.
Simply connect the 3-Wire adapter cable directly to the end of
the 6 ft. cable coming from the camera.
2. Plug in the AC adapter and insert the yellow
cable to the video jack and the white cable to the
left/mono audio jack of the TV.
3. Select the AV input on your TV by pressing the
button labeled AV or VIDEO on either your TV or TV
Download from Www.Somanuals.com. All Manuals Search And Download.
5
remote control. You should now be able to see and
hear the output from the camera.
Note: You can extend the cable using the 60 ft. extension cable
at any time to optimally locate the camera (provided the cable
length is sufficient). The camera cable can be extended up to
300 ft. Contact the Customer Service Group (1-800-654-8483)
to purchase extension cables.
CONNECTING TO A VCR or DVR
If you using a VCR or DVR, connect the 45231 Color
Camera as shown below:
TV
Power
Video Audio
In
In
VCR
Video
In
Audio
In
Audio Video
Out Out
To view:
1. Switch on the TV and VCR or DVR; Connect the
45231 Color Camera to the VCR or DVR by connecting
the 3-Wire adapter cable directly to the end of the
6 ft. cable coming from the camera. Plug in the AC
adapter and insert the yellow cable to the video jack
Download from Www.Somanuals.com. All Manuals Search And Download.
6
and the white cable to the left/mono audio jack. You
can extend the cable using the extension cable at
any time to optimally locate the camera (provided
the cable length is sufficient).
2. Select the VCR channel on your TV (3 or 4). This
should be the normal channel or input you normally
use to watch the VCR or DVR.
3. Select the AV input on your VCR or DVR by
pressing the button labeled AV or VIDEO on the
VCR/DVR or on the VCR/DVR’s remote control. You
should now be able to see and hear the output from
the camera.
Once your preferred mounting location has been
chosen, disconnect the camera lead and turn off
power to the TV, VCR or DVR and proceed to the
Installation section.
Infra-Red
(IR) LEDs
Night Vision
The 45233 Wireless Color
Camera features Night
Vision technology. Objects
and images can be seen in
little or no light up to 10 ft.
The camera uses a special
Sensor
image sensor that
automatically detects
available light levels.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
It turns on/off the Infra-Red (IR) LEDs on the front of
the camera. These LEDs provide artificial light that
allows the camera to ‘see’ in the dark. Night Vision
will appear as a Black and White image. When the
image sensor detects enough light, color will return
to the images.
INSTALLATION
Desktop Mount:
1. Place camera in desired location on a flat surface.
2. Run the 60’ cable from the camera’s location to
the location of the TV, VCR or DVR. Use the cable
clips provided to keep the cable in place. (See Notes
on Cable Installation.) Do not run cable inside wall;
Take care not to pierce, puncture or cut the cable
when securing.
TV
Power
Video Audio
In
In
VCR
Video
In
Audio
In
Audio Video
Out Out
Download from Www.Somanuals.com. All Manuals Search And Download.
8
3. Connect the camera cable to the TV, VCR or DVR
by connecting the 3-Wire adapter cable to the end
of the 60 ft. cable coming from the camera. (See
diagram). Locate the connector on the 3-Wire
adapter labeled ‘power’ and plug in the AC adapter.
Insert the yellow plug to the video jack and the
white plug to the left/mono audio jack on the TV,
VCR or DVR.
4. Switch on the power to the TV, VCR or DVR.
Select appropriate AV input on TV, VCR or DVR.
(Refer to “Connecting to a TV” or “Connecting to a
VCR or DVR” sections.)
5. Adjustments can now be made to the camera
viewing angle by rotating the camera head or
desktop mount.
Wall Mount:
1. Disconnect the camera’s cable.
2. Unscrew the camera from the
desktop base and screw on to the
wall mount bracket.
3. Drill three 1/8” holes in mounting
location and insert wall anchors
provided. Position wall bracket over
the anchors and install screws,
or screw directly into a stud.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
4. Run the 60’ cable from the camera’s location to
the location of the TV, VCR or DVR. Use the cable
clips provided to keep the cable in place. (See Notes
on Cable Installation.) Do not run cable inside wall;
Take care not to pierce, puncture or cut the cable
when securing.
5. Connect the camera cable to the TV, VCR or DVR
by connecting the 3-Wire adapter cable to the end
of the 60 ft. cable coming from the camera. Locate
the connector on the 3-Wire adapter labeled
‘power’ and plug in the AC adapter. Insert the
yellow plug to the video jack and the white plug to
the left/mono audio jack on the TV, VCR or DVR.
6. Adjustments can now be made to the camera
viewing angle by loosening the adjustment knob
and tilting and rotating the camera head.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
NOTES ON CABLE INSTALLATION
1. Use care when running the cable from the
camera to the TV, VCR or DVR; when securing the
cable, do not cut, pierce or puncture. DO NOT RUN
CABLE INSIDE WALLS.
2. Keep the camera cable away from other cables
where possible, in order to reduce the risk of picture
and audio interference.
3. Avoid laying the cable next to any heat sources.
4. If the cable is run along the ground, a protective
covering must be used to prevent the cable from
being damaged, stepped on or becoming a tripping
hazard.
5. If additional cable length is required, a 60 ft.
extension cable is available; contact Customer
Service at 800-654-8483.
If you have any questions or feel the camera
system is not operating correctly, or you simply
need additional information, please visit our web
Customer Service Group 1-800-654-8483.
SPECIFICATIONS (Subject to change without notice.)
AC/DC Adapter
Power supply operating voltage................................................120V 60Hz
Output voltage...............................................................................................9V DC
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Output current............................................................................................ 400mA
Camera
Camera operating voltage......................................................................9V DC
Current consumption.......................................................100mA maximum
Camera type.............................................................................Color 1/4” CMOS
Horizontal resolution.....................................................................360 TV lines
High-Speed Electronic Shutter.............................................016s to 6.3us
Lens.............................................................................5.6mm, F1.8 Fixed Focus
Video signal output........................................................1 Vp-p into 75 Ohm
Audio signal output.....................................................1 Vp-p into 10k Ohm
Overall size.....................................................................................Diameter: 1.6”
Pre-connected Cable type...........................................6 conductor cable
Lead Connectors .............................................................6 pin mini-DIN plug
60’ Lead Cable type..........................................................6 conductor cable
Connectors.....................................................................6 pin mini-DIN socket
Operating Temperature........................... 14°F to 104°F (-10°C to 40°C)
Humidity.........................................................................................Less than 85%
WARRANTY
ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this
product to be free from manufacturing defects for a period of one year
from the original date of consumer purchase. This warranty is limited
to the repair or replacement of this product only and does not extend
to consequential or incidental damage to other products that may be
used with this unit. This warranty is in lieu of all other warranties express
or implied. Some states do not allow limitations on how long an implied
warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
This warranty gives you specific rights, and you may also have other
rights which vary from state to state. If unit should prove defective within
the warranty period, return prepaid with dated proof of purchase to:
Jasco Products Company
10 E. Memorial Road, Oklahoma City, OK 73114
Download from Www.Somanuals.com. All Manuals Search And Download.
12
WARNING
Risk of fire and shock
• Only use the supplied cUL listed AC to DC adapter.
• The supplied adapter is for indoor use only.
• Do not run the camera cable inside walls; when securing the
cable, do not cut or puncture
• Do not use in wet locations
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Made in China
is a trademark of General Electric Company
and is used under license to Jasco Products Company LLC,
10 E. Memorial Road, Oklahoma City, OK 73114
Download from Www.Somanuals.com. All Manuals Search And Download.
|