Jabra Headphones C220 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings and Notices  
z
z
For your safety, do not operate the controls of the product while driving.  
Use this product with caution. The product is a navigation aid. It does not  
provide exact measurements of direction, distance, location or topography.  
z
z
z
The calculated route is for reference only. Always follow the posted traffic  
signs, speed limits and road restrictions.  
When you leave your car, do not leave your device on the dashboard in direct  
sunlight. This can cause the battery to overheat and malfunction.  
The Global Positioning System (GPS) is operated by the United States  
government, which is solely responsible for its performance. Any change to  
the GPS system can affect the accuracy of all GPS equipment world-wide.  
z
z
z
GPS satellite signals cannot typically pass through solid materials (except  
glass). GPS location information is not typically available inside buildings,  
tunnels, or underground parking lots.  
A minimum of 4 GPS satellite signals is needed to calculate your GPS  
position. Signal reception can be affected by weather events or overhead  
obstacles (e.g. dense foliage and tall buildings).  
Other wireless devices in the vehicle may interfere with the reception of  
satellite signals and cause the reception to be unstable.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
z
A device holder is needed when using the device in a car. Be sure to place the  
device in an appropriate place, so as not to obstruct the driver’s view, or  
deployment of airbags.  
Do not mount where the driver’s  
Do not place on the  
field of vision is blocked.  
dashboard unsecured.  
Do not mount in front of  
airbag panels.  
Do not mount in front of an  
airbag field of deployment.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Getting Started  
1.1 Understanding Hardware Components  
NOTE: Depending upon the specific model purchased, the color of your device may not  
exactly match the device shown in this manual.  
Front Components  
Ref  
Component  
Description  
Displays the output of your device. Tap the screen with your  
stylus to select menu commands or enter information.  
Touch Screen  
n
Flashes bright amber to indicate that the battery is charging,  
and turns green when the battery is fully charged.  
Charge Indicator  
o
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Back Components  
Ref Component  
Description  
Sends out music, sounds and voice.  
Speaker  
n
Right-Side Components  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Ref  
Component  
Description  
Accepts an SD (Secure Digital) or MMC (MultiMedia Card)  
card for accessing data such as map data.  
SD/MMC Slot  
n
Headphone  
Connector  
Connects to stereo headphones.  
o
Top Components  
Ref Component  
Description  
External  
Antenna  
Connector  
This connector (under rubber dust cover) allows use of an  
optional external GPS antenna with magnetic mount, which may  
be positioned on top of the car for better GPS signal reception in  
areas with poor reception.  
n
Power Button  
Turns on and off the device.  
o
Bottom Components  
Ref  
Component  
Description  
n
Mini-USB Connector Connects to the USB cable or in-car power cable.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1.2 Performing the Initial Start Up  
1. Make sure that power is supplied to your device. (See the next section.)  
2. For the initial start up, press the power button for 10 seconds to turn on your  
device.  
NOTE: For normal operation, briefly press the power button to turn on and off your device.  
3. The “Change Language” screen appears. Tap the left/right arrow button to  
select the desired language. Then, tap the  
button.  
4. The “Date&Time” screen appears. Tap the appropriate arrow button to select  
the time zone, date, and time. Then, tap the button.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. The Home screen appears. You can now use your device.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Using Your Device in a Vehicle  
Using the Device Holder  
CAUTION:  
z Select an appropriate location for the device holder. Never place the holder where the  
driver’s field of vision is blocked.  
z If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may  
be needed to route the antenna to the top of the car through a window. When closing the  
car window, be careful not to pinch the antenna cable  
Use the device holder to fix your device in a vehicle. Make sure that the GPS  
antenna has a clear view of the sky.  
Connecting the Car Charger  
The car charger supplies power to your device when you are using the device in a  
car.  
CAUTION: To protect your device against sudden  
surges in current, connect the car charger only after  
the car engine has been started.  
1. Connect one end of the car charger to the  
power connector of your device.  
2. Connect the other end to the cigarette lighter  
in the car to power and charge your device.  
The indicator on the car charger lights in  
green to indicate that power is being  
supplied to your device.  
CAUTION: For optimal performance of the lithium battery, take note of the following:  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z Do not charge the battery where the temperature is high (e.g. in direct sunlight).  
z There is no need to fully discharge the battery before charging. You can charge the battery  
before it is discharged.  
z If you will not use the product for a long period of time, be sure to fully charge the  
battery at least once every two weeks. Over discharge of the battery can affect the  
charging performance.  
NOTE: Your device can also be charged when it is connected to a desktop computer via the  
USB cable. If you intend to charge your device in this way, turn off your device so that it takes  
less time to charge the battery.  
1.4 Operating Basics  
Turning On and Off  
For normal operation, turn off the device by briefly pressing the power button.  
The device enters a suspended state.  
When you next briefly press the power button, the system resumes. You will  
either be back to where you left off or see the Home screen.  
NOTE: Pressing the power button for a longer duration has a different effect. See Section 3.1  
for more information.  
Navigating on the Screen  
To operate your device, touch the screen with your fingertip. You can perform the  
following actions:  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
Tap  
Touch the screen once with your fingertip  
to open items or select onscreen buttons or  
options.  
z
z
Drag  
Hold your fingertip on the screen and drag  
up/down/left/right or across the screen.  
Tap and hold  
Tap and hold your fingertip until an action  
is complete, or a result or menu is shown.  
Home Screen  
The first time you initialize your device, the Home screen appears. The Home  
screen is your starting place for various tasks. Tap a button to start a task or open  
another menu.  
Button Name  
Description  
For Detailed Information  
Mio Map  
Starts the navigation software.  
See the manual supplied  
with the software.  
Settings  
Customizes the system settings.  
Chapter 2  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1.5 Inserting a SD/MMC Card  
Your device has a SD/MMC slot where  
you can insert an optional Secure Digital or  
MultiMediaCard storage card.  
To use a SD/MMC card, insert it into the  
slot, with the connector pointing to the slot  
and its label facing the front of the device.  
To remove a card, first make sure that no application is accessing the card, then  
slightly push the top edge of the card to release it and pull it out of the slot.  
NOTE:  
z Make sure that no foreign objects enter the slot.  
z Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are  
not using it.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Settings  
2.1 Starting and Exiting Settings  
You can customize the system settings such as backlight brightness, volume, and  
language. Once you change the settings, the new settings will remain until you  
change them again.  
Tap the Settings button on the Home screen. The Settings menu appears as shown  
below.  
Æ
To exit Settings, tap  
.
The following sections describe the various buttons and their functions.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.2 Backlight  
1. Tap the Settings button on the Home screen.  
2. Tap the Backlight button.  
3. Move the knob along the track bar to adjust the brightness of the backlight. To  
darken the backlight, move the knob to the left. To lighten the backlight,  
move the knob to the right.  
4. Tap  
to save the changes.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.3 Volume  
1. Tap the Settings button on the Home screen.  
2. Tap the Volume button.  
3. Move the knob along the track bar to adjust the volume. To decrease the  
volume, move the knob to the left. To increase the volume, move the knob to  
the right.  
4. Tap  
save the changes.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.4 Screen  
You can calibrate the touch screen if it is not responding accurately to your taps.  
1. Tap the Settings button on the Home screen.  
2. Tap the Screen button.  
3. Tap  
to start the calibration.  
4. Tap and hold the centre of the target.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. When the target moves to another position, tap and hold the centre of the new  
target. Repeat each time to complete the calibration process.  
6. When completed, tap  
.
2.5 Power  
To check the remaining power level of your battery and/or set up the power saving  
feature:  
1. Tap the Settings button on the Home screen.  
2. Tap the Power button.  
3. The screen shows the remaining power of your battery.  
You can set a timer to automatically turn off your device when it is idle for a  
set period of time. The options include Never, 30 minutes, 20 minutes, and  
10 minutes.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Tap  
to save the changes.  
2.6 Date&Time  
1. Tap the Settings button on the Home screen.  
2. Tap the Date&Time button.  
3. To change the time zone, tap the left/right arrow in the “Time Zone” item.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. To change the date, tap the down arrow in the “Date” item. A calendar pops  
up. Tap the left arrow on the calendar to go to the earlier month and year or the  
right arrow to the later month and year. Alternatively, you can tap the month  
or year on top of the calendar to directly change the month or year.  
When the calendar shows the current month, tap the date on the calendar.  
5. To set the time, first tap the hour, minute, or second in the “Time” item and  
then tap the up arrow to increase or down arrow to decrease the value.  
6. Tap  
to save the changes.  
2.7 Change Language  
NOTE: To change the language of the Mio Map navigation software, use Mio Map settings.  
(See the document supplied with the navigation software.)  
1. Tap the Settings button on the Home screen.  
2. Tap the Change Language button.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Tap the left/right arrow button to select the desired language.  
4. Tap  
to save the changes.  
5. Tap the  
button for the new setting to take effect.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting and  
Maintenance  
3
3.1 Restart and Shut Down  
Occasionally, you may need to reset your device. For example, you should reset  
your system when it stops responding; or appears to be “frozen” or “locked up.”  
Restarting Your Device  
To restart your device, press the power button for 4 seconds until the “Power Off  
Selection” screen appears and then tap Restart.  
Shutting Down Your Device  
If your will not be using the device for a long time, you can shut down the device  
by pressing the power button for 10 seconds. System settings will be lost. To use  
the device again, press the power button for 10 seconds.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3.2 Troubleshooting  
NOTE: If you encounter a problem you cannot solve, contact an authorized service center for  
assistance.  
Power Problems  
Power does not turn on when using battery power  
z
The remaining battery power may be too low to run your device. Charge the  
battery.  
Screen Problems  
Screen responds slowly  
z
Make sure that your device is not running out of battery power. If the problem  
still exists, reset your system.  
Screen freezes  
z
Reset your system.  
Screen is hard to read  
z
Make sure that the backlight of the display is on.  
z
Move to a location with more light.  
Inaccurate response to taps  
z
Recalibrate the touch screen.  
Connection Problems  
Cable Connection Problems  
z
Make sure that your device and your computer are both turned on before  
trying to establish a connection.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
z
Make sure that the cable is securely plugged into the USB port on your  
computer and on the device. Connect the USB cable directly to your  
computer—do not run the cable through a USB hub.  
Reset your device before connecting the cable. Always disconnect your  
device before you restart your computer.  
GPS Problems  
z
z
z
When there are no valid signals available, consider the following:  
Make sure that the GPS antenna has a clear view of the sky.  
Note that the GPS reception can be affected by:  
9
9
9
9
Bad weather  
Dense overhead obstacles (e.g. trees and tall buildings)  
Other wireless device in the car  
Reflective car window tint  
3.3 Maintaining Your Device  
Taking good care of your device will ensure trouble-free operation and reduce the  
risk of damage to your device.  
z
z
Keep your device away from excessive moisture and extreme temperatures.  
Avoid exposing your device to direct sunlight or strong ultraviolet light for  
extended periods of time.  
z
z
z
Do not place anything on top of your device or drop objects on your device.  
Do not drop your device or subject it to severe shock.  
Do not subject your device to sudden and severe temperature changes. This  
could cause moisture condensation inside the unit, which could damage your  
device. In the event of moisture condensation, allow the device to dry out  
completely before use.  
z
z
Take care not to sit on the device. We advise not to carry the device in one’s  
back pocket for that reason.  
The screen surface can easily be scratched. Avoid touching it with sharp  
objects. Non-adhesive generic screen protectors designed specifically for use  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
on portable devices with LCD panels may be used to help protect the screen  
from minor scratches.  
z
Never clean your device with it powered on. Use a soft, lint-free cloth  
moistened with water to wipe the screen and the exterior of your device.  
z
z
Do not use paper towels to clean the screen.  
Never attempt to disassemble, repair or make any modifications to your  
device. Disassembly, modification or any attempt at repair could cause  
damage to your device and even bodily injury or property damage and will  
void any warranty.  
z
Do not store or carry flammable liquids, gases or explosive materials in the  
same compartment as your device, its parts or accessories.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Regulatory Information  
NOTE: Marking labels located on the exterior of your device indicate the regulations that  
your model complies with. Please check the marking labels on your device and refer to the  
corresponding statements in this chapter. Some notices apply to specific models only.  
4.1 Regulations Statements  
Class B Regulations  
USA  
Federal Communications Commission Radio Frequency Interference  
Statement  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B  
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
z
Reorient or relocate the receiving antenna.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
z
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
z
Consult the dealer or an experienced radio/TV technician for help.  
Any changes or modifications not expressly approved by the manufacturer could  
void the user’s authority to operate the equipment.  
Please note:  
The use of a non-shielded interface cable with this equipment is prohibited.  
Canada  
Canadian Department Of Communications  
Radio Interference Regulations Class B Compliance Notice  
This Class B digital apparatus meets all requirements of the Canada  
Interference-Causing equipment regulations.  
Cet appareil numérique de Classe B respecte toutes les exigences du Règlement  
Canadien sur le matériel brouileur.  
European Notice  
Products with the CE marking comply with Radio & Telecommunication  
Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic  
Compatibility Directive (89/336/EEC) and the Low Voltage Directive  
(73/23/EEC) – as amended by Directive 93/68/ECC - issued by the Commission  
of the European Community.  
Compliance with these directives implies conformity to the following European  
Standards:  
EN301489-1: Electronic compatibility and Radio spectrum Matters (ERM),  
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;  
Part 1: Common technical requirements  
EN301489-3: Electronic compatibility and Radio spectrum Matters (ERM),  
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;  
Part 3: Specific conditions for Short-Range Devices (SRD) operating on  
frequencies between 9 kHz and 40 GHz  
EN55022: Radio disturbance characteristics  
EN55024: Immunity characteristics  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN6100-3-2: Limits for harmonic current emissions  
EN6100-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply  
system  
EN60950 / IEC 60950: Product Safety  
The manufacturer cannot be held responsible for modifications made by the User  
and the consequences thereof, which may alter the conformity of the product with  
the CE Marking.  
4.2 Safety Precautions  
z
Prolonged listening of music in maximum volume can damage the ears.  
About Charging  
z
Use only the charger (UDID, G12PCL-535-B031) supplied with your  
device. Use of another type of charger will result in malfunction and/or  
danger.  
z
z
This product is intended to be supplied by a LISTED Power Unit marked with  
“LPS”, “Limited Power Source” and output rated + 5 V dc / 1.0 A”.  
Use a specified battery in the equipment.  
About the Charger  
z
Do not use the charger in a high moisture environment. Never touch the  
charger when your hands or feet are wet.  
z
Allow adequate ventilation around the charger when using it to operate the  
device or charge the battery. Do not cover the charger with paper or other  
objects that will reduce cooling. Do not use the charger while it is inside a  
carrying case.  
z
Connect the charger to a proper power source. The voltage requirements are  
found on the product case and/or packaging.  
z
z
Do not use the charger if the cord becomes damaged.  
Do not attempt to service the unit. There are no serviceable parts inside.  
Replace the unit if it is damaged or exposed to excess moisture.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About the Battery  
z
Use a specified charger approved by the manufacturer.  
CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can  
burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not  
disassemble, crush, puncture, or dispose of in fire or water.  
z
Important instructions (for service personnel only)  
9
Caution: Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions.  
Replace only with the same or equivalent type recommended by the  
manufacturer.  
9
9
9
The battery must be recycled or disposed of properly.  
Use the battery only in the specified equipment.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Indesit Washer IWC 6125 User Manual
Intellinet Network Solutions Switch 503358 User Manual
Intermec Cell Phone 751G User Manual
IOGear Games GCE700 User Manual
JVC Camcorder GR AX838EG User Manual
Kenmore Planer 15333616 User Manual
Kenwood Stereo System XD 402 User Manual
Kidde Smoke Alarm 0976 User Manual
Kolcraft Car Seat S75 T R1 11 10 User Manual
Kramer Electronics Marine Radio VP 4x4 User Manual