Jabra EASYVOICE
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
THANK YOU
thank you for purchasing the Jabra EaSYVOICE Bluetooth®
wireless technology headset. We hope you enjoy it! this instruction
manual will get you started and ready to make the most of your
headset.
ABOUT YOUR JABRA EASYVOICE
A
B
C
Answer/end button
On/off button
StatusDisplayTM With battery indicator and Bluetooth®
connection indicator
D
E
Charging socket
Volume up/volume down
Jabra Comfort EargelTM
Earhook
F
G
B
A
E
F
C
G
D
Jabra EaSYVOICE
2
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT YOUR HEADSET DOES
Your Jabra EASYVOICE lets you do all this:
-
-
-
-
-
-
-
-
-
-
answer calls
End calls
reject calls*
Voice dialling*
Last number redialling*
Call waiting*
Put call on hold*
Mute
transmit mobile music, podcasts and directions from a GPS app
Multiuse™ - being connected to two Bluetooth® devices at the
same time
Specifications
-
-
-
-
-
-
-
-
talk time 6 hours
Standby time 8 days
Bluetooth® specification version 2.1 with EDr and eSCO
Weight 8 gram
Operating range up to 10 meters (approximately 33 feet)
Supported Bluetooth® profiles: HFP, HSP
Internal rechargeable battery charged by wall charger
always see your battery and connection status on the
Jabra StatusDisplay™
-
-
Digital sound enhancement via DSP technology
a2DP (advanced audio Distribution Profile) for transmitting
music, podcasts and directions from a GPS app on your phone
-
-
-
noise reduction on transmitted and received audio
noise dependent volume control*
automatic volume adjustment on receive audio
Jabra EaSYVOICE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
* Phone dependent
-
-
-
acoustic shock protection
e-SCO for enhanced audio quality
128 bit encryption
GETTING STARTED
Follow these three steps before using your headset:
1. Charge your headset
2. Activate Bluetooth® on your mobile phone (refer to the manual for
your Mobile phone)
3. Pair your headset to your mobile phone
the Jabra EaSYVOICE is easy to operate. the answer/end button
on the headset performs different functions depending on how
long you press it.
Instruction
tap
Duration of press
Press briefly
Double tap
Press
2 quickly repeated taps
approx: 1 second
approx: 5 seconds
Press and hold
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before
you start using it. Use the aC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged
the battery indicator turns solid green for five minutes and is
then turned off.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: the lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
Jabra EaSYVOICE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING YOUR HEADSET ON AND OFF
-
Slide the on/off button towards the symbol “I” to turn the
headset On. When you do so both indicators will flash on the
Jabra StatusDisplay™.
-
Slide the on/off button towards the symbol “O” to turn the
headset off.
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’. by following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1
Put the headset in pairing mode
-
When you turn on your Jabra EaSYVOICE for the first time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth® status indication on the StatusDisplay™ is
flashing.
2
Set your Bluetooth® phone to ‘discover’ the EASYVOICE
-
Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. then set your
phone to discover new devices. this usually involves going
to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*
3
Your phone will find the Jabra EASYVOICE
-
Your phone will find the headset under name “Jabra
EaSYVOICE”. Your phone then asks if you want to pair with the
headset. accept by pressing ‘Yes’ or ‘OK’ on the phone. You
may be asked to confirm with a passkey or PIn. then use
0000
(4 zeros). Your phone will confirm when pairing is complete
and the Bluetooth® status indication on the StatusDisplay™ will
shift from flashing light to steady light and the headset voice
guidance will say “connected”.
Jabra EaSYVOICE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
* Phone dependent
CONNECTIVITY
DEVICES FOUND
Jabra EASYVOICE
HANDSFREE
Jabra EASYVOICE
MobilSurf
Jabra EASYVOICE
added.
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
Passkey:
****
The handsfree is
now ready for use
SELECT
SELECT
OK
SELECT
Manual pairing mode
If you wish to use the headset with a different phone, or if the
pairing process was interrupted, you can manually set the headset
to pairing mode.
Make sure the headset is on. Press and hold the answer/end button
for approximately 5 seconds until the Bluetooth® icon turns from
a steady light to a flashing light. then repeat steps 2 and 3 in the
above pairing guide.
Connecting with your phone
Pairing is only needed the first time a headset and phone are
used together. When the headset and phone have been paired
once, they will automatically connect when the headset is on and
Bluetooth® is activated on the phone. the headset can be used
when it is “connected” to the phone. If the devices are paired, but
do not immediately connect, tap the answer/end button. When
your headset is connected the Bluetooth® connection icon in the
StatUSDISPLaY™ WILL bE COnStant On FOr 3 SECOnDS and
the headset voice guidance will say “connected”.
WEARING STYLE
the Jabra EaSYVOICE is ready to be worn with or without the ear
hook. the ear hook can be removed and the headset can be used
with the Ultimate-fit Eargels™.
the Ultimate-fit Eargels™ can be used for both left and right wearing.
the Ultimate-fit Eargels™ come in two different styles to fit any ear.
You can also twist the eargel slightly to optimize the fit and comfort.
For optimal performance, wear the Jabra EaSYVOICE and your
mobile phone on the same side of your body or within line of sight.
You will get better performance when there are no obstructions
between your headset and your mobile phone.
Jabra EaSYVOICE
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO
Answer a call
-
tap the answer/end button on your headset to answer a call.
End a call
-
tap the answer/end button to end an active call.
Reject a call*
-
Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
will hear a busy signal.
Make a call
-
When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra EaSYVOICE’s answer/end button to transfer the call to
the headset.
Activate voice dialling*
-
Press the answer/end button. For best results, record the voice
dialling tag through your headset. Please consult user manual
of your phone for more information about using this feature.
Redial last number*
-
Double tap the answer/end button when the headset is on and
not used.
Adjust sound and volume*
tap the volume up or down to adjust the volume.
Mute/un-mute
-
-
to mute, press both volume up and down at the same time.
a low beep alert plays during a muted call.
-
to un-mute, tap either of the volume buttons.
Jabra EaSYVOICE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
* Phone dependent
Call waiting and placing a call on hold*
-
this lets you put a call on hold during a conversation and
answer a waiting call.
-
Press the answer/end button once to put the active call on
hold and answer the waiting call.
-
-
Press the answer/end button to switch between the two calls.
tap the answer/end button to end the active conversation.
HOW tHE StatUSDISPLaY™ WOrKS
Bluetooth® Indicates if your headset is connected to your
Indicator
phone
- Solid light means headset is connected to your
phone
- Flashing light means headset is in ‘pairing mode’
and ready to be connected to a new phone
battery
Indicator
Indicates battery level and if headset is turned ON
- Green light indicates that the headset has more
than 30 minutes of talk time remaining
- red light indicates that the headset has less
than 30 minutes of talk time remaining
to save battery the Jabra StatusDisplay™ is turned off after 3 seconds.
Get an instant status from the Jabra StatusDisplay™ by a tap on any
button on the headset when you are not on a call.
HOW tHE VOICE GUIDanCE WOrKS
When your headset has established a connection to your phone (or
other Bluetooth® device) the voice guidance will say “connected”.
When your headset has less than 30 minutes talk time remaining
the voice guidance will say “low battery”.
Jabra EaSYVOICE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
* Phone dependent
USING JABRA EASYVOICE WITH TWO MOBILE
PHONES
Jabra EaSYVOICE is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time.
this will give you the freedom of having only one headset to
operate both your mobile phones.
In order to use the headset with two mobile phone please make
sure you have ”paired” the Jabra EaSYVOICE with both phones.
See the section “PaIrInG It WItH YOUr PHOnE” for instructions.
Once you have “paired” your headset with two phones simply
make sure your headset is on, and that Bluetooth® is enabled on
the phones and the headset will then automatically connect to
both phones.
Please note that Last number redial will dial the number from
the last outgoing call, independent of the mobile phone, and the
Voice Dialling function will only work on the last paired mobile
phone.
TROUBLESHOOTING & FAQ
I hear crackling noises
-
Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 10 meters (33 feet) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
-
-
-
Increase the volume in the headset.
Ensure that the headset is paired to a device that is playing.
Make sure your phone is connected to the headset by tapping
the answer/End button.
I am having pairing problems
-
You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions.
I want to reset the headset
It is possible to reset the headset. turn the headset On. then
Jabra EaSYVOICE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
’Press and hold’ the volume down and answer/end buttons at
the same time for approx. 5 seconds until the battery icon and
Bluetooth® icon flash 5 times simultaneously - then the pairing
list is reset.
-
turn the headset OFF . the next time you power on, the headset
will go into pairing mode as the first time you powered your
new EaSYVOICE on.
Will the Jabra EASYVOIVE work with other Bluetooth® equip-
ment?
-
the Jabra EaSYVOICE is designed to work with Bluetooth®
mobile phones. It can also work with other Bluetooth® devices
that are compliant with Bluetooth® version 1.1 or higher and
support a headset and hands-free profile.
I cannot use Reject call, call on hold, Redial or voice dialling
these features are dependent on the ability of your phone to
support a hands-free profile. Even if the hands-free profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra EaSYVOICE with 2
mobile phones.
NEED MORE HELP?
1. Web:
(for the latest support info and online User Manuals)
2. E-mail:
Deutsch
English
support.de@jabra.com
support.uk@jabra.com
support.es@jabra.com
support.fr@jabra.com
support.it@jabra.com
Español
Français
Italiano
nederlands
support.nl@jabra.com
support.pl@jabra.com
Polska
Jabra EaSYVOICE
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Scandinavian
Россия
support.no@jabra.com
support.ru@jabra.com
support.au@jabra.com
support.cn@jabra.com
support.jp@jabra.com
support.sg@jabra.com
Information: info@jabra.com
australia
China
Japan
Singapore
3. Phone:
belgique/belgie
Danmark
Deutschland
Die Schweiz
España
00800 722 52272
70 25 22 72
0800 1826756
00800 722 52272
900 984572
France
0800 900325
Italia
800 786532
Luxembourg
nederland
norge
00800 722 52272
0800 0223039
800 61272
Österreich
Polska
00800 722 52272
0801 800 550
00800 722 52272
00800 722 52272
020792522
Portugal
Suomi
Sverige
United Kingdom 0800 0327026
Россия
australia
China
+7 495 660 71 51
1-800-738-521
800-858-0789
Japan
03-3242-8722
Singapore
U.S
800-101-2329
1 (800) 327-2230
1 (800) 489-4199
00800 722 52272
Canada
International
Jabra EaSYVOICE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING CARE OF YOUR HEADSET
-
always store the Jabra EaSYVOICE with the power off and
safely protected.
-
avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). this can shorten
battery life and may affect operation. High temperatures may
also degrade performance.
-
Do not expose the Jabra EaSYVOICE to rain or other liquids.
GLOSSARY
1
Bluetooth® is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth® is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth® devices either. Get more information at
www.bluetooth.com.
2
Bluetooth® profiles are the different ways that Bluetooth®
devices communicate with other devices. Bluetooth® phones
support the headset profile, the hands-free profile or both. In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3
4
Pairing creates a unique and encrypted link between two
Bluetooth® devices and lets them communicate with each other.
Bluetooth® devices will not work if the devices have not been paired.
Passkey or PIN is a code that you enter on your Bluetooth®
enabled device (e.g. a mobile phone) to pair it with your Jabra
EaSYVOICE. this makes your device and the Jabra EaSYVOICE
recognize each other and automatically work together.
5
Standby mode is when the Jabra EaSYVOICE is passively wait-
ing for a call. When you ‘end’ a call on your mobile phone,
the headset goes into standby mode.
Dispose of the product according
to local standards and regulations.
Jabra EaSYVOICE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2011 GN Netcom US, Inc. All rights reserved. Jabra® is a registered
trademarkofGNNetcomA/S.Allothertrademarksincludedhereinare
thepropertyoftheirrespectiveowners.TheBluetooth®wordmarkand
logosareownedbytheBluetoothSIG,Inc.andanyuseofsuchmarksby
GNNetcomA/Sisunderlicense.(Designandspecificationssubjectto
change without notice).
© 2011 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademarkofGNNetcomA/S.Allothertrademarksincludedhereinare
thepropertyoftheirrespectiveowners.TheBluetooth®wordmarkand
logosareownedbytheBluetoothSIG,Inc.andanyuseofsuchmarksby
GNNetcomA/Sisunderlicense.(Designandspecificationssubjectto
change without notice).
MaDE In CHIna
MODEL: OtE4
Download from Www.Somanuals.com. All Manuals Search And Download.
|