JVC VCR SR L910EK User Manual

VIDEO CASSETTE RECORDER

SR-L910E

SR-L910EK

INSTRUCTIONS

(A)

SR-L910E

REC STOP/EJECT

REC

CHECK

OPERATE

VIDEO CASSETTE RECORDER

OPE. LOCK

PAUSE/

STILL

REVERSE

REW

PLAY

COUNT/

SHIFT/TRACKING

SET/V.LOCK

RESET

CLOCK

/CANCEL

TIME

MODE

TIMER

REC

AL/PL

RESET

PAL

VICTOR COMPANY OF JAPAN, LIMITED

Before you begin operation this unit.

Please read the instruction carefully to be

sure you get the best possible performance.

is a registered Trademark owned by VICTOR COMPANY OF JAPAN,LTD.

is a registered Trademark in Japan,the U.S.A., the U.K. and many other countries.

Printed in Thailand

LLT0014-001A-H

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

1 INTRODUCTION

7 RECORDING

1-1 Major Features.............................................. 6

1-2 Periodical Maintenance ................................ 6

1-3 Precautions ................................................... 7

1-4 Daily Inspection ............................................ 7

7-1 Preparation ................................................ 26

7-2 Recording................................................... 27

7-3 Timer Recording ........................................ 28

7-4 Alarm Recording ........................................ 33

7-5 Sensor Recording ...................................... 35

7-6 Repeat Recording ...................................... 36

7-7 Series Recording ..... ................................. 37

2 CONTROLS AND CONNECTORS

2-1 Front Panel .................................................. 8

2-2 Display ....................................................... 10

2-3 Rear Panel ................................................. 11

7-8 Recording with External VCR Activation

Signal ... ..................................................... 38

7-9 How to Restore Recording After Power

Failure ........................................................ 39

3 CONNECTIONS

7-10 External Timer Recording .......................... 39

7-11 Tape End Buzzer ....................................... 39

3-1 Connecting to a Camera ............................ 13

3-2 Connecting a System Using a Sequential

Switcher ..................................................... 14

8 PLAYBACK AND SPECIAL-EFFECTS

PLAYBACK

3-3 Connecting the Rear Panel Input/Output

Terminal Connections ................................ 15

8-1 Preparation ................................................ 40

8-2 Playback .................................................... 40

8-3 Special-Effects Playback ........................... 41

8-4 Index Search.............................................. 42

8-5 Tracking/V. Lock Adjustment ..................... 42

4 MONITOR ON-SCREEN DISPLAY

4-1 On-Screen Display in the Time/Date and

Record Mode ............................................. 16

4-2 Main Menu Display .................................... 17

4-3 Alarm Input/Power Loss Data Display ....... 18

4-4 Hour Meter Display .................................... 18

9 TROUBLESHOOTING

9-1 Error Indication .......................................... 43

9-2 No Error Indication ..................................... 44

5 SETTING OF THE FUNCTION MENU

SWITCHES

5-1 Function Menu Switche Setting ................. 19

10 OPTIONAL SA-K97U RS-232C INTERFACE

BOARD

10-1 Installation of the SA-K97U ....................... 45

10-2 SA-K97U Specifications............................. 46

10-3 SA-K97U RS-232C Protocol &

5-2 Contents of the Function Menu

Switches .................................................... 20

6 PREPARATION

6-1 Cassette Loading/Unloading...................... 23

6-2 Date and Time setting................................ 23

6-3 Summer Time Compensation .................... 25

6-4 Selection of Record/Play Mode.................. 25

Commands................................................. 47

11 APPENDIXES

11-1 Rear Panel's Input/Output.......................... 54

11-2 Specifications............................................. 55

JVC is not liable for compensation for loss or damage

to recordings in the event this unit fails to record or play

back properly because the unit malfunctions or a

defective video cassette tape is used.

PAL

Please note that it may be unlawful to use any material

recorded from TV broadcast programs or pre-recorded

programs without the consent of the owner of

recorded exclusively for personal use.

The SR-L910E/EK is a video cassette recorder able to

execute timelapse recording with VHS cassettes.

Use only video cassettes bearing the

mark.

PAL

This unit is designed for professional use.

Download from Www.Somanuals.com. All Manuals Search And Download.

1 INTRODUCTION

1-1 Major Features

1-3 Precautions

24-hour long-time recording with a 180-minute tape

Recording times are selectable from 3 hours (SP mode) and

12/24 hours (Timelapse mode). Monitor image recording for up

to one-day (24-hour) is possible with a 180-minute tape.

Audio monitoring

Audio signals can be recorded in the 12-hour/24-hour

Timelapse mode, as well as in the conventional 3-hour mode.

This strengthens surveillance capabilities by providing both

audio and video information.

Recording Check function

Handling and storage place

Pressing the [REC CHECK] button during recording allows you

to check the status of the recording in progress. When

activated via the corresponding function menu switch, the built-

in head cleaner automatically cleans the heads whenever

inferior picture quality is detected during Recording Check.

After cleaning, the Recording Check operation is executed

again automatically (Auto Recording Check function).

Operation lock system

To prevent accidental or deliberate interference with VCR

operation, a secret operation lock system is provided.

Warning function

Error indications are shown on the front panel display.

Power-off video throughput function

Even when the power is off, the camera's EE input can be

output from the VCR.

Camera switching signal output terminal

Automatic re-start of recording after a power failure

Digital hour meter display

Repeat recording/series recording function

Recording control with external activation signal

Alarm recording, tape end and warning electronic buzzer

Summer time compensation function

Avoid using the unit in places subject to the

following conditions:

Handle the unit carefully

• Do not place anything heavy on the unit (a monitor,

etc.). A malfunction may occur.

• Do not put any foreign substance into the cassette

loading slot.

• Avoid violent shocks to the recording chassis during

transportation. Remove the cassette tape from the unit

for transportation.

• extreme heat or cold

• strong magnetic fields (do not use a transceiver within

2 meters of this unit)

• high humidity

• dust and soil

Alarm recording function

• vibrations

When an alarm signal is input in the Timelapse Record mode,

the 3-hour mode is automatically engaged. Alarm recording

time can be selected from 5, 15, 30, 60, 120, or 180 sec., to

tape end or set manually.

An index code is automatically recorded when alarm recording

starts. Used as an alarm cue signal, this allows quick access to

alarm recording points with the Index Search function.

Sensor recording

Whenever an alarm signal is input in the Stop mode, the

Record mode is automatically engaged.

Time/date generator

Superimposes the year, month, date, minute and second on

the image during recording. Also allows you to use the menu

screen to display the number of alarms, alarm time, and the

number of the power failures.

Turn off the power to save electricity when not using the

unit.

• variations in temperature

Use this unit in horizontal (flat position) only.

Do not leave the unit in the Still or Record Pause

mode for a long time as this may damage the tape.

To minimize tape damage, this VCR automatically

enters the Stop mode after about 5 minutes have

passed in the Still or Record Pause mode.

Condensation

Condensation occurs in the

following cases.

• When the VCR is moved from a

cold place to a warm place.

• In a room that has just been heated

or in an area directly exposed to a

cooler.

Wired remote control (optional)

RS-232C control (with optional SA-K97U RS-232C interface

board installed)

The SR-L910E/EK can be controlled via a personal computer.

Operation status can be monitored on the computer.

Head drum

When cold beer is poured into a glass, water drops

appear on the glass’s surface. This phenomenon is

called “condensation”. When condensation occurs on

the VCR’s head drum and tape guides it may damage

the tape.

Timer recording function

Two types of timer recording are available: based on the date

(up to 8 programs) or based on the day of the week.

Video tape

• When there is excessive humidity

1-2 Periodical Maintenance

When condensation is expected to occur

Turn the power of the VCR on before use.

This VCR incorporates precision mechanical parts which will collect dirt over time and ultimately deteriorate and wear out.

Over long periods of use, dirt and dust accumulates on the heads, drums and tape transport mechanisms. Dust which

penetrates the VCR (especially during outdoor use) also promotes the wear and deterioration of mechanical parts by causing

poor contact between tape and heads. This also prevents the VCR from maintaining video and audio quality at high levels. To

prevent wear and deterioration, clean the heads regularly using a head cleaning tape. However, because a head cleaning

tape alone cannot clean the entire tape transport mechanism, this should also be inspected periodically to prevent any

problems that could result from a sudden failure.

Video cassette

• Only use video cassette bearing the

mark.

PAL

• To prevent accidental erasure of a recorded tape, break

the erasure prevention tab on the cassette. To use a

cassette with a broken tab, place a piece of cellophane

tape over the broken tab.

• Video cassettes cannot be used upside down.

• Leaving the tape in a partially wound condition for a long

time may damage the tape. Rewind the tape to the

beginning before storage.

Erasure prevention tab

As replacement and adjustment of parts require advanced skills and specialized equipment, please contact the person in

charge of professional video equipment at your nearest JVC-authorized service agent for servicing.

Timelapse recording is performed over very long periods of time

which means that a durable tape is required.

Monitoring Usage Time

Periodic Maintenance

•

Use an E-180 tape or shorter.

Do not use extended tapes (180 minutes or more such as E-240).

The total operation time reached by an ordinary home VCR

in 5 or 6 years may be reached by a professional VCR in

as few as 5 or 6 months. Therefore, it is important that the

total hours of operation be carefully monitored. An hour

meter in the on-screen display (see page 18) shows the

accumulated time. In the chart below, the hours

accumulated in each month are shown in relation to the

number of hours used per day. Times shown inside

shaded area indicate that maintenance should be

performed.

Check or replace the following mechanical parts according

to the running time.

Running time

Drum ass’y (including heads)

Pinch rollers

1000H 2000H 3000H 4000H

1-4 Daily Inspection

⅜

ⅷ

⅜

Although this unit has been designed for reliable operation

over a long period of time, a daily inspection is recommended

to ensure optimum performance. In particular, be sure to

check the repeat recording function on a daily basis.

Rewind the tape recorded the previous day for several

Drive parts

seconds.

Press the play button for playback.

^ : Cleaning

⅜ : Check or replace as required.

Check that the playback picture is normal.

Check that the recorded date and time are correct.

Usage

ⅷ : Replace

Inspection procedure

• This unit includes a Recording Check function (using

the [REC CHECK] button) and an Automatic

Recording Check function for daily checking of

recording quality.

time per

day

1 month 2 months 3 months 6 months 12 months

• Maintenance requirements may vary depending on the

operating environment and usage. The information

above should be used as a reference guide.

Turn on the power for all units connected to the

surveillance system.

2 hours

8 hours

12 hours

24 hours

120

480

180

720

360

720

Check the quality of the image shown on the monitor.

Check that the date and time shown on the monitor are

correct.

240

360

720

1440

2160

4320

2880

4320

8640

If any problems are found after inspection, turn the power off,

unplug the power plug from the AC outlet, and contact your

JVC dealer.

720

1080

2160

1440

Download from Www.Somanuals.com. All Manuals Search And Download.

2 CONTROLS AND CONNECTORS

2-1 Front Panel

12 14

SR-L910E

REC STOP/EJECT

REC

CHECK

OPERATE

VIDEO CASSETTE RECORDER

OPE. LOCK

PAUSE/

STILL

PLAY

COUNT/

SHIFT/TRACKING

RESET

REVERSE

REW

CLOCK

/CANCEL

TIME

MODE

TIMER

REC

SET/V.LOCK

AL/PL

RESET

PAL

[OPERATE] button

[STOP/EJECT] button

Display section

[SET/V. LOCK +, -] buttons

Press to turn the operating power ON/OFF. When this

button is ON, the OPERATE indicator lights and the unit

can be operated. When a cassette is inserted, the

power switches on and the OPERATE indicator lights

automatically.

• Stops the tape.

• Ejects the tape when pressed in the Stop mode.

For details, refer to page 10.

• Press to set values in date/time setting, timer program

setting and function menu setting.

• Press to reduce the vertical shifting of the picture in

the Still mode.

[COUNT/CLOCK] button

Press this button to select the time display or tape

counter in the display.

[REC] button

Starts recording when pressed in the Stop mode.

[RESET/CANCEL] button

• Normally press this button to reset the tape counter to

0000.

• When the buzzer sounds, press this button to stop the

buzzer sound.

Alarm and sensor buzzer will not stop sounding.

• In the Timer Program Setting mode, press this button

to cancel the program settings. For details, refer to

"Timer Recording" on page 31.

When the power is turned off, the time is displayed.

Operation buttons

[PLAY] button

Starts playback.

[PAUSE/STILL] button

• Temporarily stops recording when pressed in the

Record mode.

• Displays a still picture when pressed in the Play mode.

• Advances field by field when pressed in the Still mode.

Pressing this button for more than 2 seconds starts

continuous field-by-field playback (slow motion).

[REVERSE] button

Starts reverse playback when pressed in the Play or Still

mode.

[FF] button

The OPERATE button does not completely shut off

the mains power to the unit, but switches the

operating current on and off.

[TIME MODE] button

Use to select the recording or playback time mode.

Each time this button is pressed, the recording time

mode changes in the following sequence.

Cassette loading slot

For cassette loading and unloading. Use a VHS

cassette tape.

3H (VHS SP mode)

L24H (24-hour Timelapse mode)

mode) ....

[

L12 (12-hour Timelapse mode)

[

3H (VHS SP

[REC CHECK] button

Use to check recording.

Playback Time Mode will differ depending on how the

function menu switch <NOISELESS PLAY> is set.

When NOISELESS PLAY is set to OFF: 3H (VHS SP

[AL/PL RESET] alarm/power loss reset button

Press this button to stop alarm recording or reset the

alarm input or power loss data. For details, refer to

page 34.

When pressed in the Record mode, this will rewind the

tape about 4 seconds and then play back the rewound

section so that the recording quality can be checked.

After playback, the Record mode is automatically re-

engaged at the point where recording was interrupted.

mode)

(24-hour Timelapse mode)

When NOISELESS PLAY is set to ON: 3H (VHS SP

[

L12 (12-hour Timelapse mode)

[

L24

[

3H (VHS SP mode) ....

• Fast forwards the tape.

• Starts fast-forward shuttle search when pressed in the

Play mode.

[OPE. LOCK] button

Press to activate the operation lock function.

mode)

[

12 (12-hour Noiseless playback mode)

[

•

The FM level is checked during playback in Recording

Check operation to determine whether or not picture

quality is defective. If it is judged defective, the heads

are automatically cleaned. How this operation is

performed is determined by the setting of the [REC

CHECK] switch in the function menu.

24 (24-hour Noiseless playback mode)

mode) ....

The selected recording/playback time mode is shown on

the display.

[

3H (VHS SP

• If the function menu switch <INDEX SEARCH> is set

to ON and an index-recorded tape is loaded, Index

(alarm) Search starts in the forward direction when this

button is pressed in the Stop or Play mode.

Select whether the index signal is to be recorded

during alarm signal input or every hour (exact hour

with no minute and second) using the function menu

switch <INDEX ALARM/SKIP>.

[REW] button

• Rewinds the tape.

• Starts reverse shuttle search when pressed in the Play

mode.

• If the function menu switch <INDEX SEARCH> is set

to ON and an index-recorded tape is loaded, Index

(alarm) Search starts in the reverse direction when this

button is pressed in the Stop or Play mode.

Select whether the index signal is to be recorded

during alarm signal input or every hour (exact hour

with no minute and second) using the function menu

switch <INDEX ALARM/SKIP>.

[TIMER REC] button

Press this button to execute the timer recording. For

details, refer to "Timer Recording" on page 28.

– When set to "MANUAL":

Head cleaning is performed once and recording

resumes.

[MENU] button

– When set "AUTO":

Press this button to display the date, time setting, timer

program setting, various function menu setting and hour

meter. Press again to cancel the display.

Head cleaning is performed once and recording is

resumed for several seconds. Then, Recording

Check operation is performed again.

If picture quality is again judged defective, head

cleaning is performed once again and "E-09" is shown

on the display to indicate that there is a problem.

Recording will continue, however.

[SHIFT/TRACKING +, -] buttons

• Press to select an item in date/time setting, timer

program setting and function menu setting.

• Press to adjust tracking and reduce noise if there are

tracking problems in the 3H (VHS SP) mode or during

search.

* Tracking adjustment is not possible in the L12H and

L24H Timelapse Play mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 CONTROLS AND CONNECTORS

2-1 FRONT PANEL

2-3 Rear Panel

2-2 Display

11 12

MIC

VIDEO

AUDIO

CAM SW

OUT

COM

ALARM

COM

SERIES/CLOCK

WARNING

REC OUT

REMOTE

ALARM

TAPE

/REC

OUT

RESET

END OUT

OUT

Operation mode display

Shows the operation modes.

TIMER indication

Lights during timer recording programming/operation.

CAM SW

OUT

ALARM

SERIES/CLOCK

COM

REC OUT

WARNING

COM

ALARM

TAPE

/REC

OUT

Connecting the wires to the terminals

RESET

END OUT

OUT

REPEAT indication

Lights when the VCR is in the Repeat Record mode.

1. Hold the button down

and insert the wire

over the top of the

terminal.

2. Release the button to

lock the wire in the

terminal.

Fast-

forward

Continuous field

advance playback

OVERLAP indication

Blinks when programs scheduled for timer recording

overlap.

Playback Recording

Rewind

button

Timer program number

During timer recording, the number of program being

recorded blinks.

Record-

pause

Rewind Fast-forward Reverse

search search

playback

Still

* (

) mark in the Rec/Pause mode is shown in red.

When the timer recording ends, this number goes out.

Cassette indication

Lights when a cassette is loaded. Blinks when a

cassette is being ejected.

AL (alarm) indication

Shown during alarm recording. Blinks when alarm

recording ends.

Power cable

[SERIES/CLOCK OUT] series recording signal/clock

reset signal output terminal

Outputs the series recording signals or clock reset

signals.

Select the output signal with the <TERMINAL SEL 1>

menu switch.

• Series recording signal output

When the <TERMINAL SEL 1> menu switch is set to

“SERIES”, the series recording signal is output.

• Connect to the other VCR series recording signal input

terminal. When the tape being recorded in this unit

ends, a signal is output from this terminal to the

connected VCR.

• Select the signal output timing with the <REC

REMAIN> menu switch (tape end, or 3 minutes or 6

minutes before the tape ends).

Connect the power plug to an AC 220-240 V, 50/60 Hz

outlet.

SP/LP indication

Shows the VHS standard (SP) mode during recording/

playback.

During Timelapse Recording/Playback mode, the SP

indicator is shown.

VISS indication

[MIC IN] mic input connector

Connect a microphone with 3.6-mm dia. plug. When

signals are input from both the microphone connector

and the audio input connector, audio signals are mixed

and recorded.

Shown when the alarm recording start point is index-

searched. For details, refer to “Index Search” on page

42.

LOCK indication

Lights when the operation lock function is activated.

Tape counter/time indication

[VIDEO IN] video input connector (BNC)

Receives composite video signals from a connected

camera or other video source.

• When the power is turned on, the tape counter or

current time are shown. The display can be selected

with the [CNT/TIME] button.

• When the power is turned off, the present time (hour,

minute, second) is shown.

AL REC (alarm recording) indication

Lights when the function menu switch <ALARM REC> is

set to “ON”.

[AUDIO IN] audio input connector (RCA)

Receives audio signals from a connected audio source.

SENSOR REC (sensor recording) indication

Lights when the function menu switch <SENSOR REC>

is set to “ON”.

Recording/playback mode time display

• Shows the recording/playback mode set with the [TIME

MODE] button.

[AUDIO OUT] audio output connector (RCA)

Outputs audio signals.

• Clock reset signal output

When the <TERMINAL SEL 1> menu switch is set to

“C.ADJ”, the clock reset signal is output when the

internal clock is at AM0:00 and PM0:00. When

connected to the [CLOCK IN] terminal of another SR-

L910E/EK, this unit’s time can be synchronised with

the time on the other VCR if the time difference is

within 30 seconds.

[VIDEO OUT] video output connector (BNC)

Outputs composite video signals. Input camera signals

(composite video signals) can still be output through this

connector even when no power is supplied to the unit

(Power-Off Video Throughput function).

• When a tape ends in the Record mode, the record time

mode indication goes out and the "End" indication

blinks (when the <REC REMAIN> menu switch is set

to "OFF"). If the <REC REMAIN> menu switch is set

to "180S" or "360S", the "End" indication blinks

3 minutes or 6 minutes before the tape ends.

• When an problem occurs, the error indication “E-∗∗”

blinks. For details, refer to page 43.

[REMOTE] remote connector (RCA)

Connect the optional RM-G30U remote control.

• During the index search by RS-232C Command, the

index number is indicated in 2 digits (00-99). During

the index search by FF/REW Button, the index number

indicates 01 and 00 only.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 CONTROLS AND CONNECTORS

3 CONNECTIONS

3-1 Connecting to a Camera

MIC

VIDEO

AUDIO

CCD

CAM SW

OUT

COM

ALARM

COM

SERIES/CLOCK

WARNING

REC OUT

REMOTE

ALARM

TAPE

/REC

OUT

RESET

END OUT

OUT

Microphone

Amplifier

OUT

Video camera

RCA

BNC

Microphone

CAM SW

OUT

ALARM

SERIES/CLOCK

COM

REC OUT

WARNING

COM

ALARM

TAPE

/REC

OUT

RESET

END OUT

OUT

Connecting the wires to the terminals to

1. Hold the button down

and insert the wire

over the top of the

terminal.

2. Release the button to

lock the wire in the

terminal.

MIC

VIDEO

AUDIO

CAM SW

OUT

COM

ALARM

REC OUT

COM

SERIES/CLOCK

WARNING

REMOTE

ALARM

TAPE

/REC

OUT

RESET

END OUT

OUT

button

AC 220-240 V

12 11 10

[SERIES/CLOCK IN] series recording signal/clock

reset signal input terminal

Input the series recording signals, VCR activation

signals from the external control equipment or clock

reset signals.

• Recording mode signal output

When the <TERMINAL SEL 2> menu switch is set to

REC and the unit is in the Record mode, the recording

mode signal (+12 V) is output.

BNC

RCA

[COM] common ground terminal

Connect to the ground terminal of a connected unit.

Select the input signal with the <TERMINAL SEL 1>

menu switch.

• Series recording signal input

[TAPE END OUT] tape end signal output terminal

Outputs a Tape End signal when the tape ends during

recording.

• Outputs a +12 V signal during recording, playback, FF

and rewind. When the tape ends during recording, a 0

V (GND level) signal is output.

• When the tape ends during auto repeat recording,

signals are output for about 2 seconds.

• Connect an external alarm lamp or buzzer via an

external interface.

• To cancel the output, press the EJECT button, PLAY

button, FF button or REW button.

When the <TERMINAL SEL 1> menu switch is set to

“SERIES”, the series recording signal is input.

• Connect to the other VCR series recording signal

output terminal.

• When a series recording signal is received from the

other VCR, recording starts automatically.

• VCR activation signal input

• When the <TERMINAL SEL 1> menu switch is set to

“EXT”, recording start and stop can be controlled with

external signal input.

• Connect to an external control device.

When a VCR activation signal (ground input) is

received, recording starts automatically and continues

for as long as the VCR activation signals are input.

• Clock reset signal input

When the <TERMINAL SEL 1> menu switch is set to

“C.ADJ”, the clock reset signal from the master clock

can be received.

• Inputting the clock reset signal synchronises the time

with the master clock time if the time difference is

within 30 seconds. If the difference exceeds

30 seconds, the time will not be adjusted correctly.

Alarm sensor

Monitor TV

Connect the monitor’s video/audio input connectors to the SR-L910E/EK’s video/audio output connectors.

Connect the video camera’s video output connector to the SR-L910E/EK’s video input connector.

Input audio signals to the audio input connectors via an amplifier.

When connecting an alarm sensor, connect it to the SR-L910E/EK’s alarm input terminal.

When the connection is complete, connect the power plug to an AC 220-240 V, 50/60 Hz outlet.

The timing of the tape end signal output during

recording can be selected with the <REC REMAIN>

menu switch (at tape end, or 3 minutes or 6 minutes

before the tape ends).

CONNECTION TO THE SW-501E/SW-502E SEQUENTIAL SWITCHER

1. Connect pin 6 on the sequential switcher's TIMER INPUT

connector to the VCR's CAMERA SW OUT terminal. Connect

pin 1 to the GND terminal.

SW-501E/SW-502E

JK102/JK202

D.GND

AT 1

–

[ALARM REC OUT] alarm recording mode signal

output terminal

Outputs +12 V signals during alarm recording.

TIMER INPUT

connector

AT 0

OUT

2. Connect pin 8 on the sequential switcher's TIMER INPUT

connector to pin 8 on its TIMER OUT connector.

CS1 0

CS0 1

OUT

[ALARM RESET] alarm signal reset input terminal

Receives signals to cancel alarm recording.

• Alarm input data is not reset.

TMP1

Note:

SODT IN/OUT

SLV/MST

● Be sure to use two DIN connectors for connections.

● Set the function menu switch <CAM SW WIDTH> to 5msec.

(Factory setting: 5msec)

[WARNING/REC OUT] warning signal/rec signal

output terminal

Outputs a warning signal or recording mode signal. The

type of output signal can be selected with the

<TERMINAL SEL 2> menu switch.

JK103/JK203

[ALARM IN] alarm signal input terminal

Receives signals to start alarm or sensor recording.

D.GND

AT 0

–

OUT

TIMER OUT

connector

AT 1

[COM] common ground terminal

Connect to the ground terminal of a connected unit.

CS0 1

CS1 0

TMP0

OUT

MIC

VIDEO

AUDIO

• Warning signal output

CAM SW

OUT

COM

ALARM

COM

SERIES/CLOCK

WARNING

REC OUT

ALARM

TAPE

/REC

OUT

REMOTE

RESET

END OUT

OUT

When the <TERMINAL SEL 2> menu switch is set to

“WARNING”, a warning signal (+12 V) is output if an

abnormality occurs in tape transport or mechanism

operation.

OUT

[CAM SW OUT] camera switching signal output

terminal

When a sequential switcher is connected, this terminal

outputs camera switching timing control signals. For

details, refer to page 54.

SODT IN/OUT

D. +5 V OUT

Sequential switcher

SW-501E/SW-502E

Download from Www.Somanuals.com. All Manuals Search And Download.

3 CONNECTIONS

3-2 Connecting a System Using a Sequential Switcher

3-3 Connecting the Rear Panel Input/Output Terminal Connections

[CAM SW OUT] camera switching signal output terminal

[ALARM IN] alarm signal input terminal

CAM SW

OUT

ALARM

Video cameras

COM

CCD

Sequential switcher

camera switching

signal input

Sequential switcher

alarm output

terminal

Alarm sensor input

Alarm sensor

CCD

Alarm signal output

Sequential switcher

Video output

[ALARM RESET] alarm reset terminal

[ALARM REC OUT] alarm recording mode signal output terminal

Camera

switching

signal input

ALARM

RESET

ALARM

Microphone

RESET COM

REC OUT

COM

Microphone

Alarm

lamp

Vcc

External

interface

Vcc: 5V–12V

Switch

RCA

BNC

[TAPE END OUT] tape end output terminal

[WARNING/REC OUT] warning signal/recording

mode signal output terminal

TAPE

WARNING

/REC

END OUT COM

MIC

VIDEO

AUDIO

CAM SW

OUT

COM

ALARM

COM

SERIES/CLOCK

WARNING

OUT

COM

REC OUT

REMOTE

ALARM

TAPE

/REC

OUT

RESET

END OUT

OUT

Alarm lamp

OUT

External

interface

Alarm lamp

External

interface

AC 220-240 V

[CLOCK IN/OUT] clock reset terminal

When setting the clock to the first VCR’s clock

BNC

RCA

First VCR

Second VCR

Last VCR

CLOCK

OUT

CLOCK

External interface example

COM

Monitor TV

Example: Lamp lights with HIGH signal

(Lamp, etc.)

Power

supply

Relay

When setting the clock to the external master clock

Connect video cameras and alarm sensor to a sequential switcher (frame switcher).

Connect the sequential switcher’s (frame switcher) alarm signal output, camera switching signal input and video output to

the SR-L910E/EK.

Connect the monitor’s video/audio input connectors to the SR-L910E/EK’s video/audio output connectors.

When the connection is complete, connect the power plug to an AC 220-240 V, 50/60 Hz outlet.

Synchro should be applied to all connected video cameras.

First VCR

Second VCR

Last VCR

Control

signal

External

master clock

CLOCK

COM

GND

External

interface

Use appropriately rated devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

4 MONITOR ON-SCREEN DISPLAY

Status information and other data including date/time, alarm input data, power loss (power failure) data and total operation

hours can be displayed on a connected monitor. Function settings can be switched via the on-screen function menu switches

and menu screens are also provided for timer recording program setting and date/time setting.

• Normally, the time/date data is shown on screen.

• Additional data displays and menu screens can be displayed by pressing the [MENU] button. This calls up the main menu

screen where you can select items as desired.

4-2 Main Menu Display

You can display date and time data recorded when an alarm input or power failure occurs, as well as the hour meter (drum

rotating time) by selecting the desired item in the main menu.

The timer recording program setting screen, function menu switch setting screen, and date/time setting screen can also be

displayed by selecting the desired item in the main menu.

4-1 On-Screen Display in the Time/Date and Record Modes

Operation

[SHIFT +/–] buttons

[MENU] button

Time/date and recording mode data is recorded and displayed on screen.

Connect the VCR's video output connector to the

monitor's video input connector.

In the Stop, Record and Record Pause modes, data is superimposed on the input video signals.

• The on-screen display can switched ON/OFF using the <POSITION> switch in the function menu's ON SCREEN MODE

setting screen. You can also change the on-screen display position using this switch.

SR-L910E

OPERATE

VIDEO CASSETTE RECORDER

Turn on the VCR and the monitor. Make sure the Stop

mode is engaged.

Hour

Menu switch

<POSITION> setting

Display

Minute

Second

Recording mode

OPE. LOCK

COUNT/

SHIFT/TRACKING

SET/V.LOCK

RESET

CLOCK

/CANCEL

Connect the VCR's video output connector to the

monitor's video input connector.

TIME

MODE

TIMER

REC

AL/PL

RESET

Press the [MENU] button.

1 2 : 3 0

1 1 – 6 – 9 8

4 5 3 H

PAL

[

The main menu screen is displayed.

Turn the power on (monitor and VCR) and engage the

Stop mode.

Year (last two digits)

Month

Day

• When a video signal is input to the video input

connector, time/date, and recording mode are

superimposed on the picture.

• If there is no signal input, display data is

superimposed on a black background.

Press the [SHIFT +/-] button to move the cursor arrow to

the item you want to display.

• Press the [SHIFT +] button to move the cursor arrow

down. Press the [SHIFT -] button to move it up.

[SET +/–] buttons

• "L-UP"

Main menu screen

Recording mode

* If the date and time have not been set, correct date

and time indications are not available.

Press the [SET +] or [SET -] button to display the

selected item.

MAIN MENU

3 H 1 2 : 3 0

1 1 –

4 5

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

– 9 8

If no on-screen data is displayed, set the <POSITION>

menu switch in the function menu's ON SCREEN MODE

setting screen to the desired position (except "OFF").

To end menu operation and restore the normal screen,

press the [MENU] button.

• "R-UP"

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Changing the display position

You can select the position on screen where data is

displayed with the <POSITION> menu switch in the ON

SCREEN MODE setting screen. Data can be displayed

in any one of the four corners of the screen.

● PROGRAM TIMER:

Displays the program setting screen for timer recording.

•

When the [MENU] button is pressed during playback,

the monitor screen display switches from theplayback

picture to the input video signal (EE picture) and the

main menu is shown on the screen.

This means that even during playback you can check

menu contents. Press the [MENU] button again to

restore the playback picture.

Setting of the menu switch <POSITION>

– L-UP

: Left top (factory setting)

: Right top

* Timer programming is not possible if the date and

time are not set. In this case, the date/time setting

screen will be displayed.

– R-UP

• "R-BOTTOM"

– R-BOTTOM : Right bottom

– L-BOTTOM : Left bottom

● FUNCTION:

Displays the function menu setting screen.

● ALARM IN:

– OFF

: Display is off. No indications are

shown.

1 2 : 3 0

3 H 1 1 – 6 – 9 8

4 5

Displays the date and time when an alarm signal was

input.

Recording mode

● For "Function menu switch setting", refer to page 19.

● POWER LOSS

Displays the date and time when a power failure

occurred.

● HOUR METER:

Displays the hour meter (drum rotating time).

● CLOCK ADJUST:

• In the Record mode, on-screen time/date and

recording mode data is recorded together with video

signals.

If you do not want to record on-screen data, set the

<POSITION> menu switch to "OFF".

• In the Play mode, on-screen data recorded on the tape

is displayed.

• "L-BOTTOM"

Displays the date/time setting screen.

* Set the date and time before using this unit.

1 2 : 3 0

4 5

1 1 – 6 – 9 8 3 H

Recording mode

Download from Www.Somanuals.com. All Manuals Search And Download.

4 MONITOR ON-SCREEN DISPLAY

5 SETTING OF THE FUNCTION MENU SWITCHES

[SHIFT +/–] buttons

You can customize the VCR's functions to suit the requirements of your application using on-screen menu's function switches.

[MENU] button

[SHIFT –] button

[MENU] button

[SHIFT +] button

SR-L910E

RESET

/CANCEL

COUNT/

CLOCK

SHIFT/TRACKING

REC STOP/EJECT

REC

CHECK

OPERATE

VIDEO CASSETTE RECORDER

OPE. LOCK

PAUSE/

STILL

SET/V.LOCK

TIME

MODE

TIMER

REC

AL/PL

RESET

PLAY

COUNT/

CLOCK

SHIFT/TRACKING

SET/V.LOCK

RESET

REVERSE

REW

/CANCEL

TIME

MODE

TIMER

REC

AL/PL

RESET

PAL

[SET –] button

[SET +] button

[AL/PL RESET]

button

● Menu function switches are available on four setting screens: ON SCREEN MODE, VTR MODE 1, VTR MODE 2 and

ALARM/SENSOR REC mode. (When the optional SA-K97U RS-232C interface board is installed, the RS-232C

PARAMETER setting screen is also available.)

[SET +/–] buttons

4-3 Alarm Input/Power Loss Data Display

The dates and times of up to nine (9) alarm inputs or power losses (failures) can be displayed.

5-1 Function Menu Switch Setting

Turn on the VCR and monitor. Make sure the Stop

mode is engaged.

Alarm input data screen

[MENU] button

ALARM IN

Normal screen

Press the [MENU] button to display the main menu.

A L – 0 0 1 2 0 : 3 0

9 – 6 – 9 8

First alarm

Second alarm

A L – 0 0 2 2 1 : 4 4 1 0 – 6 – 9 8

A L – – – – – – : – – – – – – – – – –

[MENU]

button

[MENU]

button

Press the [SHIFT +] or [SHIFT -] button to select

ALARM IN or POWER LOSS.

• To display alarm input data, select ALARM IN. To

display power failure data, select POWER LOSS.

Alarm/sensor recording

mode setting

Main menu screen

On-screen mode setting

VTR mode 2 setting

VTR mode 1 setting

MAIN MENU

ON SCREEN MODE

VTR MODE 1

(SHARPNESS)

A LARM / SENSOR REC MODE

VTR MODE 2

NORMAL

(SUMMER TIME)

(TAERMINAL SEL 1)

(TAERMINAL SEL 2)

(REC REMAIN)

OFF

(VIDEO MODE)

(AUTO REC)

AUTO

OFF

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

(POSITION)

–UP

(ALARM REC)

(SENSOR REC)

(TIMER ALARM)

(DURATION)

OFF

180SEC

OFF

SERIES

WARN

OFF

PRESS (AL

PRESS (MENU)

PL) TO ALL RESET

TO END

Press the [SET +] or [SET -] button to display the

selected data (alarm input or power loss).

(REC CHECK)

MANUAL

REPEAT

OFF

ALARM

OFF

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

(NOISELESS PLAY)

(CAMERA SW)

OFF

(BUZZER)

●

Hour

Year

Month

(TAPE END MODE)

STOP

(CAM SW WIDTH)

5msec

• When 10 or more alarm input or power loss data

items have been stored, subsequent data will

replace earlier items, beginning from the second

item.

OFF

[SET

+/-]

Minute

Day

PRESS (SHIFT, SET)

PRESS (MENU) TO END

PRESS (SHIFT, SET)

PRESS (MENU) TO END

PRESS (SHIFT, SET)

PRESS (MENU) TO END

PRESS (SHIFT, SET)

PRESS (MENU) TO END

buttons

•

When the optional SA-K97U RS-232C interface

board is installed, the RS-232C PARAMETER

setting screen is also available.

•

Select an item with the [SHIFT +/-] buttons.

Enter the selected values with the [SET +/-] buttons.

Power loss (failure) data screen

Press the [MENU] button to end menu operation and

restore the normal screen.

POWER LOSS

P L – 0 0 1 2 1 : 3 0

P L – 0 0 2 1 7 : 4 4 1 0

P L – – – – – – : – – – – – – – – – –

First power failure

Second power

failure

/ 9 8

Preparation

Resetting alarm input/power loss (failure) data

Connect the VCR's video output connector to the

monitor's video input connector.

Turn on the VCR and the monitor. Make sure the Stop

mode is engaged.

Press the [MENU] button to display the main menu.

Press the [SHIFT +] or [SHIFT –] button to select

FUNCTION.

The VTR mode 1, VTR mode 2 and alarm/sensor

recording mode setting screens include several menu

switches.

Ⅲ Press the [SHIFT +] or [SHIFT –] button to select the

item you want to set.

When the "AL" (alarm) display is off and the VCR is in

the normal screen mode, press the [AL/PL RESET]

button to reset the alarm input and power loss data

stored in memory.

PRESS (AL

PRESS (MENU)

PL) TO ALL RESET

TO END

• When the cursor arrow reaches the last item (bottom of the

screen) pressing the [SHIFT +] button advances the

display to the next menu switch setting screen.

Press the [SET +] or [SET –] button.

[

The ON SCREEN MODE setting screen is

displayed.

e.g.: (WARNING BUZZER)

[

(SUMMER TIME)

4-4 Hour Meter Display

• When the cursor arrow is at the first item (top of the

screen), pressing the [SHIFT -] button will change the

display to the previous menu switch setting screen.

• Only one menu switch is available in the ON SCREEN

MODE setting screen. This switch (<POSITION>)

allows you to select the screen position of the on-

screen display and to switch it ON/OFF.

Press the [SET +] or [SET –] button to enter the selected

position.

To display another setting screen, press the [SHIFT +/–]

button.

• Press the [SHIFT +] button to display the VTR mode 1

setting screen.

Drum rotating time is displayed in the form of an hour

meter. Use this data to schedule maintenance.

Operation

e.g.: (SHARPNESS)

[

(POSITION)

Turn on the VCR and monitor. Make sure the Stop

mode is engaged.

Hour meter screen

Press the [SET +] or [SET –] button to enter the selected

value.

Ⅲ To set more than one menu switch, repeat steps

6 and 7.

HOUR METER

Press the [MENU] button to display the main menu.

Press the [SHIFT +] or [SHIFT -] button to select HOUR

METER.

End menu switch setting.

Press the [MENU] button twice.

DRUM ON 02345H

Drum rotating time

Press the [SET +] or [SET -] button to display the hour

meter (drum rotating time).

[

The normal screen is restored.

• Press the [SHIFT –] button to display the alarm/sensor

recording mode setting screen.

Press the [MENU] button to end menu operation and

restore the normal screen.

• Set values are stored in the VCR's memory. This

data is retained even when the power is turned off.

PRESS (MENU) TO END

Download from Www.Somanuals.com. All Manuals Search And Download.

5 SETTING OF THE FUNCTION MENU SWITCHES

5-2 Contents of the Function Menu Switches

Three function menu switch setting screens are available.

[

]: Factory setting

[

]: Factory setting

Screens

Items

INDEX

Set values

Function

Screens

Items

Set values

[L-UP]

Function

VTR mode 1

setting

[OFF]

Enables or disables the Index Search function.

OFF : The index search function is disabled.

On-screen

mode setting

POSITION

Sets the on-screen position of time/date and recording mode data. If no on-

screen display is required, use this menu switch to turn it off.

R-UP

ON : When an index-recorded tape is put in the FF or REW Shuttle Search

mode, the VCR searches for the nearest recorded index code (VISS

signal) and engages playback at the indexed position.

When an alarm-recorded tape is fast-forwarded or rewound, the VCR

searches for the nearest index code and enters the Stop mode at the

indexed position.

R-BOTTOM

L-BOTTOM

OFF

L-UP

R-UP

: Display is shown in the top left corner of the screen.

: Display is shown in the top right corner of the screen.

R-BOTTOM : Display is shown in the bottom right corner of the screen.

L-BOTTOM : Display is shown in the bottom left corner of the screen.

OFF

: The on-screen display is not shown.

VTR mode 1

setting

SHARPNESS

VIDEO MODE

[NORMAL]

SHARP

Selects the picture quality in the Play mode.

NORMAL : Normal picture quality.

SHARP

Select whether the index signal is to be recorded during alarm signal

input or every hour (exact hour with no minute and second) using the

function menu switch <INDEX ALARM/SKIP>.

: Picture contours are emphasized.

[AUTO]

B/W

Allows you to force Black and White recording regardless of the type of signal

input.

INDEX

AL/SKIP

[ALARM]

SKIP

Sets the timing of the recording of the index code.

ALARM : Index is recorded when the ALARM signal is input.

AUTO : Normally set to this mode. Recording automatically conforms to the

type of signal input (Colour or Black and White).

B/W : Even if a colour video signal is input, recording is performed in the

Black and White mode. A higher resolution picture can be obtained

than in the Colour mode.

SKIP

: Index is recorded with 1-hour intervals.

TAPE END

BUZZER

[OFF]

Turns the Tape End buzzer on or off.

OFF : The buzzer does not sound at tape end.

ON : When the tape reaches the position set with the <REC REMAIN> menu

function switch during recording (tape end, or 3 minutes or 6 minutes

before the tape ends), a buzzer sounds.

AUTO REC

[OFF]

Enables or disables automatic external timer recording or automatic restart of

recording after a power failure.

OFF : External timer recording or automatic recording after power failure is

disabled.

To stop the buzzer sound, press the [REW] button, [EJECT] button or

[POWER] button.

When the mode is changed, the buzzer sound stops.

: Recording starts automatically when power is turned on.

WARNING

BUZZER

[OFF]

Turns the warning buzzer on or off.

OFF : The buzzer does not sound.

ON : The buzzer sounds.

REC CHECK

[MANUAL]

AUTO

Sets whether or not Recording Check is automatically performed at the

beginning of a tape in the Repeat Recording mode. Also sets what action is

taken if picture quality is found to be defective when Recording Check is

activated with the [REC CHECK] button.

VTR mode 2

setting

SUMMER TIME

[OFF]

Turns summer time compensation on or off.

OFF : Clock is not adjusted for summer (daylight saving) time.

ON : Clock is adjusted for summer (daylight saving) time.

MANUAL:

•

If picture quality is found to be defective when Recording Check is activated

with the [REC CHECK] button, head cleaning is performed once and recording

resumes. The error indication "E-09" is shown on the display for 10 seconds.

Automatic Recording Check is not performed at the beginning of a tape set to

record repeatedly.

TERMINAL

SEL 1

[SERIES]

EXT

C.ADJ

Select the signal to be input or output to the [SERIES/CLOCK IN·OUT]

terminals on the rear panel.

SERIES : Set to this position to input or output a series recording signal.

•

EXT

: Set to this position to start or stop the recording with the VCR

activation signal input from an external control device.

AUTO:

• If picture quality is found to be defective when Recording Check is activated

with the [REC CHECK] button, head cleaning is performed and recording

resumes for several seconds, then the recording is automatically checked

again. If the picture quality is still defective, head cleaning is performed again

and the error indication "E-09" is shown on the display. The error indication

remains displayed while recording continues.

C.ADJ : Set to this position to input or output a clock reset signal.

TERMINAL

SEL 2

[WARN.]

REC

Select the signal output from the rear panel’s [WARNING/REC OUT] terminal.

WARN. : Set to this position to output a warning signal. The warning signal is

output if an abnormality occurs in tape transport or mechanism

operation.

• Automatic Recording Check is performed at the beginning of a tape set to

record repeatedly.

REC

: Set to this position to output a recording mode signal (+12 V) in the

Record mode.

If the picture quality is defective, Recording Check is performed again. If the

picture quality is still defective, head cleaning is performed again and the error

indication "E-09" is shown on the display. The error indication remains

displayed while recording continues.

REC REMAIN

[OFF]

180S

360S

Set the tape end signal output timing. When the tape reaches the specified

position, the following signals are output.

• The tape end signal is output from the rear panel’s [TAPE END] terminal.

• The series recording signal is output from the rear panel’s [SERIES OUT]

terminal (with the <TERMINAL SEL 1> function menu switch set to “SERIES”).

• The tape end buzzer sounds (with the <TAPE END BUZZER> function menu

switch set to “ON”)

TAPE END

MODE

[STOP]

REW

Sets the operation mode when the tape ends in the Record mode.

( In the Play and FF modes, the tape stops.)

REPEAT

EJECT

STOP

REW

: The tape stops.

: The tape automatically rewinds and enters the Stop mode.

• “End” is shown on the counter display.

REPEAT : In the Record mode, the tape automatically rewinds and then restarts

recording (repeat recording).

EJECT : The tape is ejected.

OFF.

180S. : When the tape remaining time is about 3 minutes

360S : When the tape remaining time is about 6 minutes

: When the tape ends

NOISELESS

PLAY

[OFF]

Sets the tape transport for 12H and 24H Timelapse mode.

OFF : Linear tape transport in the 12/24H PLAY mode.

However, the FDP display becomes L12H/L24H.

ON : Frame tape transport in the 12/24 H PLAY mode.

However, the FDP display becomes 12H/24H.

The operation mode at tape end during recording, in the case

when alarm or sensor recording is executed even once, can be

set with the menu switch <TAPE END MODE> on the alarm/

sensor recording mode setting screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 SETTING OF THE FUNCTION MENU SWITCHES

6 PREPARATION

5-2 Contents of the Function Menu Switches

6-1 Cassette Loading/Unloading

[

]: Factory setting

Insert the cassette with its label side facing you.

Gently push the center of the cassette until the machine starts automatic loading.

Screens

Items

Set values

[OFF]

Function

[EJECT] button

VTR mode 2

setting

CAMERA SW

Sets the camera switching interval for output to an external sequential switcher

during recording.

1 FIELD

OFF

: No camera switching signal is output.

1 FRAME

1 FIELD : Set to this position to switch the camera every 1 field.

1 FRAME: Set to this position to switch cameras every 1 frame.

CAM SW

WIDTH

[5 msec]

20 msec

Sets the output time of the camera switching signal.

5m sec : Camera switching signal output time for 3/12/24H recording : 5 msec.

20m sec : Camera switching signal output time for 3H recording : 5 msec.

12/24H recording : 20 msec.

PAL

Alarm/sensor

recording mode

setting

ALARM REC

[OFF]

Turns the alarm recording function on or off.

(

) indication

TIMER indication

[TIMER REC] button

Alarm recording is enabled only in the Timelapse Record mode.

An index code (VISS signal) is also recorded at the start point of alarm

recording as an alarm cue signal.

Note:

To avoid damage or injury, do not insert your hand or other foreign objects into the cassette loading slot.

OFF : Alarm recording is disabled.

ON : This unit enters the VHS SP Record mode, when an alarm signal is input

to the rear panel's [ALARM IN] terminal during timelapse recording.

SENSOR REC

[OFF]

Turns the sensor recording function on or off. Sensor recording is enabled in

the Stop mode. An index code (VISS signal) is also recorded at the start point of

sensor recording.

Auto power on

Auto play

When a cassette is loaded, the power automatically turns

When a cassette with no erasure prevention tab is loaded,

playback starts automatically.

OFF : Sensor recording is disabled.

on and the (

) cassette indication appears.

ON : When an alarm signal is input to the rear panel's [ALARM IN] terminal in

the Stop mode. this unit automatically starts recording in the VHS SP

Record mode.

Unloading

TIMER ALARM

DURATION

OFF

[ON]

Sets whether or not the alarm signal input should be enabled during timer

recording.

OFF : Alarm signal input during timer recording is disabled.

ON : Alarm signal input during timer recording is enabled.

Press the [EJECT] button.

The cassette is ejected.

If the Timer Recording Standby mode is engaged (TIMER

indication is shown on the display), the cassette will not be

ejected when the [EJECT] button is pressed.

To unload the cassette, press the [TIMER REC] button to

release the Timer Recording Standby mode, then press the

[EJECT] button.

[

If the power is not on when the [EJECT] button is

pressed, power is automatically switched on and the

cassette is ejected. Once the cassette is unloaded, the

power turns off again automatically.

Selects the recording duration for alarm recording or sensor recording.

5 ..... 180 : Alarm or sensor recording is performed for the time specified (5 sec.

to 180 sec.).

TAPE END: Alarm or sensor recording continues until the tape ends.

MANUAL : Alarm or sensor recording continues for as long as alarm signals

are input.

120

[180]

TAPE END

MANUAL

Set to this position when specifying the alarm recording time with a

switcher.

6-2 Date and Time Setting

The time/date generator and timer recording will not function if the date and time are not set.

The time/date setting can be enabled on the CLOCK ADJUST menu screen or the front panel display.

BUZZER

[OFF]

Selects whether or not the alarm buzzer sounds during alarm or sensor

recording.

OFF : The buzzer does not sound.

ON : The buzzer sounds.

[SHIFT –] button

TAPE END

MODE

[STOP]

REW

REPEAT

EJECT

Set the operation mode at tape end during recording in the case when alarm or

sensor recording is executed even once.

[OPERATE] button

[MENU] button

[SHIFT +] button

STOP

REW

: Stops at tape end.

: Rewinds the tape automatically and stops.

RESET

COUNT/

CLOCK

SHIFT/TRACKING

SET/V.LOCK

/CANCEL

REPEAT : Rewinds the tape automatically to the beginning and restarts

recording.

EJECT : The tape is ejected.

TIME

MODE

TIMER

REC

AL/PL

RESET

RS-232C

parameter

setting

This screen is displayed on the on-screen setting screen only when the (optional) RS-232C board

SA-K97U is installed.

Select the RS-232C data transfer speed from 1200 bps, 2400 bps, 4800 bps or

9600 bps.

BAUD RATE

1200

2400

4800

[9600]

[SET –] button

[SET +] button

• Time-keeping continues even when the power cable is unplugged from the AC outlet or a power failure occurs.

• If the power cable has been unplugged for a long time of period, check the current time before using the VCR. (Time shift

may occur under certain operating or environmental conditions.)

Download from Www.Somanuals.com. All Manuals Search And Download.

6 PREPARATION

(Main menu)

Set the date and time using the CLOCK ADJUST menu

screen.

6-3 Summer Time Compensation

MAIN MENU

PROGRAM TIMER

FUNCTION

Set whether or not the Summer Time mode is engaged with

the <SUMMER TIME> function menu switch on the VTR mode

2 setting screen.

When the <SUMMER TIME> switch is set to "ON", the

currently set time is advanced one hour.

ALARM IN

• When setting the time, make sure the <SUMMER TIME>

switch is set to "OFF".

When the unit is shipped, this switch is set to "OFF".

• Clock setting is not possible during timer recording.

POWER LOSS

HOUR METER

CLOCK ADJUST

Turn on this unit and the monitor and engage the Stop mode.

Press the [MENU] button to display the main menu screen.

Press the [SHIFT +] or [SHIFT -]button to select <CLOCK ADJUST>.

(Set the cursor arrow to <CLOCK ADJUST>.)

Press the [SET +] or [SET -] button to display the CLOCK ADJUST

screen on the monitor.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

[SET +/-] button

During daylight savings time

Standard time

Select the item to be set.

• Press the [SHIFT +] or [SHIFT -] button to select the item.

(Date/time setting screen)

Set the time with one-hour delay.

After setting the time, set the <SUMMER TIME> switch to

"ON".

CLOCK ADJUST

Set the clock to the actual time.

When daylight savings starts, set the <SUMMER TIME>

menu switch to "ON".

[

The selected item will blink.

YEAR

MONTH

DAY

HOUR

MINUTE

2000

Enter the value for the selected item with the [SET +/-] button.

• Press the [SET +] button to increase the number.

• Press the [SET -] button to decrease the number.

• The set time advances one hour.

• The time advances one hour on the display

At the end of the daylight savings time season, set the

<SUMMER TIME> switch to OFF.

• The setting range for the year is from 1997 to 2096.

• This VCR uses the 24-hour clock.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

• The standard time instead of "Summer Time" is displayed.

• If an invalid date is set, it is automatically corrected.

(e.g.) 1999-2-29 [ 1999-2-28

[SHIFT +/-] button and

[SET +/-] button

CLOCK ADJUST

Ⅲ Repeat steps 5 and 6 until the year, month, date, hour, and minutes

have all been set.

End date and time setting.

6-4 Selection of Record/Play Mode

YEAR

1998

MONTH

DAY

HOUR

MINUTE

Display section

• Press the [MENU] button twice.

[

The normal display is restored and the set date and time are shown

on screen. The time count starts from 00 seconds.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Note:

•

If you press the [OPERATE] button after setting the date and time

without first pressing the [MENU] button, the set date and time are

PAL

[MENU] button

canceled.

(Normal screen)

1 7 : 3 0 : 0 1 3 H

Recording/

playback time

mode indication

[TIME MODE] button

LP indication

SP indication

30 – 6 – 98

Press the [OPERATE] button to turn the operating mode on.

The [OPERATE] indicator lights.

Select the recording/playback time mode with the [TIME MODE] button. Refer to the table below for more information on each

mode.

• Each time the [TIME MODE] button is pressed, the recording mode changes in the following order:

3H (VHS SP mode) [ L12H (12-hour Timelapse mode) [ L24H (24-hour Timelapse mode) [ 3H (VHS SP mode) ...

Playback Time Mode will differ depending on how the function menu switch <NOISELESS PLAY> is set.

When NOISELESS PLAY is set to OFF: 3H (VHS SP mode) [ L12 (12-hour Timelapse mode) [ L24

(24-hour Timelapse mode) [ 3H (VHS SP mode) ....

When NOISELESS PLAY is set to ON: 3H (VHS SP mode) [ 12 (12-hour Noiseless playback mode) [ 24 (24-hour Noiseless

playback mode) [ 3H (VHS SP mode) ....

• The selected recording or playback time mode is shown on the display.

Set the date and time on the front panel display

(Menu switch <POSITION> set to L-UP)

YEAR

Turn the power on.

Press the [COUNT/CLOCK] button for at least 2 seconds.

The “year” indication blinks in the display.

Enter the value for the year with the [SET+] or [SET-] button.

•

• The SP indicator lights.

Press the [SHIFT+] button: the “month” indication blinks.

•

Press the [SHIFT+] or [SHIFT-] button to move the blinking section.

Enter the value for the blinking section with the [SET+] or [SET-]

button.

Note:

MONTH

DAY

• When a tape recorded in the VHS Long Play (LP) mode is played back, the LP indicator lights. Recording in the LP mode is

not possible with this unit.

Set the “month”, “day”, “hour” and “minute” with the [SHIFT+/-] and

[SET+/-] buttons.

When you have finished setting, press the [COUNT/CLOCK] button.

Recording/

playback

interval (sec.)

Display

indi-

cations

Available recording time (hour)

E-30 E-60 E-90 E-120 E-180

Audio

recording

Tape

running

Modes

•

The display returns to the clock display mode and the time count

starts from 00 seconds.

MINUTE

HOUR

VHS Standard (SP)

12-hour Timelapse

24-hour Timelapse

12-hour Noiseless

24-hour Noiseless

0.5

1.5

—

0.1

Possible

(Continuous) 23.39 mm/sec.

(Continuous) 4.68 mm/sec.

(Continuous) 2.60 mm/sec.

L12H

L24H

12H

0.18

0.1

Time indication on the VCR's display

• When the power is turned off, the time is displayed. When the power is turned on, set the time display mode with the

[COUNT/CLOCK] button to display the current time.

Impossible Continuous field advance

24H

0.18

• The first time you turn on the power, the time display shows a blinking "0:00:00".

• When the built-in backup battery capacity is low, the error indication E-10 appears on the display. Contact your local JVC

dealer to replace the built-in battery.

* Recording time varies depending on the type of cassette used.

* For optimum performance and reliability, use a tape with a standard recording time of 180 minutes (E-180) or less.

* You can set 12H and 24H only during Playback Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-1 Preparation

7-2 Recording

[STOP/EJECT] button

[REC] button

[MENU] button

[OPERATE] button

[REC CHECK] button

PAL

[TIME MODE] button

[PLAY] button

[PAUSE/STILL] button

recording mode time.)

Connection

<TAPE END BUZZER> ... Factory setting: OFF

• Set to ON to sound the buzzer when the tape ends during

recording.

Make sure the input/output connectors on the rear panel are

properly connected. For details, refer to "CONNECTIONS" on

page 13 to 15.

Recording Check

Press the [OPERATE] button to turn the operating

mode on.

The [OPERATE] indicator lights.

Insert a cassette with safety tab in place.

The ( ) cassette indication lights on the display.

* If a cassette is loaded when the operating mode is off,

the operating mode is switched on automatically (auto

operate on function).

<TERMINAL SEL 1> ... Factory setting: SERIES

Set the rear panel’s [SERIES/CLOCK] terminal as required.

• Set to “SERIES” when to use the series recording function.

• Set to “EXT” when to control recording start/stop from an

external device.

[

Record Check in the Timelapse mode should be

performed after recording has been executed for more

than one minute. If the recording time is too short,

Menu switch setting

Set the function menu switches as required.

[

Record Check cannot be performed correctly.

<POSITION> ... Factory setting: L-UP

<TERMINAL SEL 2> ... Factory setting: WARN

Select the signal output from the rear panel’s [WARNING/

REC OUT] terminal.

• Set to WARN to output a warning signal.

• Set to “REC” to output a recording mode signal (+12 V)

during recording.

• Sets the position of the on-screen time/date and recording

mode display. Select one of the four corners of the screen.

During recording, the on-screen data is recorded in the

selected position together with the video signals.

• If on-screen data recording is not required, set this switch

to OFF.

Press the [REC CHECK] button during recording.

[

The tape is played back in reverse for about 4

seconds, then, the Play mode is engaged to check

the recording. After playback, the VCR enters the

Record mode at the point where the recording was

interrupted.

Press the [REC] button to start recording.

[

The recording indicator lights on the display,

showing that the Record mode is engaged.

<REC REMAIN> ... Factory setting: OFF

Select the timing to send the tape end information. Choose

from tape end (OFF), about 3 minutes before the tape end

(180S) or about 6 minutes before the tape end (360S).

When the tape reaches the selected position during

recording, the following information is output.

• Tape end signal from the rear panel’s [TAPE END OUT]

terminal

<VIDEO MODE> ... Factory setting: AUTO

Set to "B/W" to record colour video signals in the Black and

White mode.

• During Recording Check, the FM level of the signal

recorded on the tape is checked in the Play mode to

determine whether or not the recording quality is

suitable. If the recording quality is judged inferior,

subsequent operation depends on the setting of the

<REC CHECK> function menu switch.

To stop recording temporarily

Press the [PAUSE/STILL] button.

<AUTO REC> ... Factory setting: OFF

• Set to ON to execute timer recording using a commercially

available external timer or to automatically resume

recording when power is restored after a power failure.

• For details, refer to "How To Restore Recording After

Power Failure" and "External Timer Recording" on page 39.

[

The record-pause indicator is shown on

the display and the Pause mode is

engaged.

• Series recording signal during series recording

• Tape end buzzer

• “End” indication in the counter display

ⅷ When set to MANUAL

<REC CHECK> ... Factory setting: MANUAL

Selects between manual and automatic Recording Check

operation.

To start recording again

[REC CHECK] button

<CAMERA SW> ... Factory setting: OFF

Sets the switching timing for cameras connected to an

external sequential switcher.

• To switch cameras after each field or frame, set this menu

switch to FIELD or FRAME.

Press the [PLAY] button.

• When set to AUTO, Recording Check is automatically

executed at the beginning of a tape set to record

repeatedly or when inferior picture quality is detected. In

the Auto mode, Recording Check and head cleaning is

automatically repeated up to two times. If the inferior

picture quality is detected on both checks, the warning

code E-09 is displayed. The warning code remains

displayed while recording continues.

• When set to MANUAL, the Recording Check operation is

executed only when the [REC CHECK] button is pressed.

If inferior picture quality is detected, head cleaning is

performed once and recording resumes. The warning

code "E-09" is shown on the display for 10 seconds.

Normal

During

recording

Recording

check

Recording

[

The recording indicator is shown on the

display and the Recording mode is engaged.

<CAM SW WIDTH>... Factory setting: 5 msec

Defective

Auto head

cleaning

Sets the output time for the camera switching signal to be

output to the external sequential switcher during recording.

When set to "5msec", the output time becomes 5 msec in

the 3/12/24H recording mode. When set to "20msec", the

output time becomes 5 msec in the 3H recording mode, and

20 msec in the 12/24H recording mode.

Recording

Note

If the VCR is left in the Record Pause mode for

more than 5 seconds, the transition between

scenes may be distorted when recording is re-

started.

Error indicator E-09 (for 10 sec.)

ⅷ When set to AUTO

[REC CHECK] button

<ALARM REC> ... Factory setting: OFF

• Set to ON to perform alarm recording.

For details, refer to "Alarm Recording" on page 33.

Normal

During

recording

<TAPE END MODE> ... Factory setting: STOP

Selects the mode engaged when the tape ends during

recording.

Recording

check

Recording

<SENSOR REC> ... Factory setting: OFF

• Set to ON to perform sensor recording.

For details, refer to "Sensor Recording" on page 35.

To stop recording

Defective

• When set to STOP, the Stop mode is engaged.

• When set to REW, the tape is rewound to the beginning.

• When set to REPEAT, the tape is rewound to the

beginning and recording re-starts (repeat recording).

• When set to EJECT, the tape is ejected.

Press the [STOP/EJECT] button.

The tape stops and the Stop mode is engaged.

Auto head

cleaning

[

<TIMER ALARM>...Factory setting: ON

Sets whether or not the alarm signal input should be

enabled during timer recording.

When set to "OFF", alarm signal input is disabled, and

when set to "ON", the alarm signal input is enabled.

Normal

Recording

check

Auto recording

for about 7

seconds

Recording

<INDEX AL/SKIP> ... Factory setting: ALARM

Sets the timing for recording of the index code.

When set to "ALARM", the code is recorded at the time of

the alarm signal input.

Defective

Auto head

Setting on the front panel

Recording

cleaning

Display

• Select the recording time mode with the [TIME MODE]

button. For details, refer to "Selection of the Record/Play

mode" on page 25.

When set to "SKIP", it is recorded once each hour during

the actual duration of the recording. (This is unrelated to the

Error indicator E-09 display

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-3 Timer Recording

Two types of timer recording are available: daily timer (by specifying the date) and weekly timer (by specifying the day of the

week).

Select the timer program No.

Start time (minute)

Press the [SHIFT +] or [SHIFT -] button to move the

cursor arrow to the program No. to be set.

• Press the [SHIFT +] button to move the cursor arrow

down and the [SHIFT -] button to move it up.

Stop time (hour)

Start time (hour)

• Daily timer

: Set the date to any date within one year of the current date. Up to 8 programs can be set.

Stop time (minute)

Record mode

Month

Day

• Weekly timer : Set the day of the week. Recording will automatically be performed on that day each week.

PROGRAM TIMER

DAILY) START END MODE

You can program the timer using the on-screen menu display.

(

Set the selected program No.

Press the [SET +] or [SET -] button.

1. – – – – – – – : – – – – : – – – – H

2. – – – – – – – : – – – – : – – – – H

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

[SHIFT–] button

[

The selected program No. blinks.

[OPERATE] button

[MENU] button

Program No.

[SHIFT+] button

• Press the [SET +] button. The day blinks.

• Press the [SET -] button. The record mode blinks.

COUNT/

CLOCK

SHIFT/TRACKING

RESET

/CANCEL

Set the timer.

PRESS (MENU)

TO END

Press the [SHIFT +] or [SHIFT -] button until the item

you want to set starts blinking.

• Press the [SHIFT +] button to shift the blinking to

the right.

SET/V.LOCK

TIME

TIMER

REC

AL/PL

RESET

Blinking

MODE

PROGRAM TIMER

(

DAILY) START END MODE

"Day"

(minute)"

"Record mode"

[

"Month"

"Stop time (hour)"

Select the next program No.

[

"Start time (hour)"

[

"Start time

1. – – – – – – – : – – – – : – – – – H

2. – – – – – – – : – – – – : – – – – H

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

[

"Stop time (minute)"

[TIMER REC] button

[SET–] button

[

[SET+] button

• Press the [SHIFT -] button to move the blinking to

the left.

Press the [SET +] or [SET -] button to set the value

for the blinking item.

• Press the [SET +] button to increase the value and

the [SET -] button to decrease it.

Ⅲ Set the "Day", "Month", "Start time (hour)", "Start time

(minute)", "Stop time (hour)", "Stop time (minute)" and

"Record mode" with the [SHIFT +/-] and [SET +/-]

buttons.

Note:

• Timer programming is not possible if the date and time have not been set.

PRESS (MENU)

TO END

Preparation

• Make sure all necessary equipment is properly connected to the input/output connectors on the rear panel.

• Check the current time.

• Load a cassette with the safety tab in place. If the power is off, loading the cassette automatically turns the VCR on

(auto power on function).

PROGRAM TIMER

(

DAILY) START END MODE

1. 3 0 – –6 – 8 : 3 0 1 7 : 1 5 – 3 H

2. – – – – – – – : – – – – : – – – – H

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

[

When all values are set, the set program No. is

shown on the VCR's display.

Main menu screen

Setting the daily timer

Accessing another program No.

MAIN MENU

• Select the "Record mode" (so that it is blinking) and

press the [SHIFT +] button. Or, select "Day" (so that it

is blinking) and press the [SHIFT -] button.

PRESS (MENU)

TO END

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

Turn on this unit and the monitor and engage the Stop mode.

Press the [MENU] button.

The main menu screen is displayed on the monitor.

[

The selected item stops blinking. You may now

select another program No.

[

PROGRAM TIMER

Press the [SHIFT +] or [SHIFT -] button to move the cursor arrow to

<PROGRAM TIMER> in the main menu, then press the [SET +] or [SET -]

button.

The daily timer program setting screen is displayed.

• <DAILY> is shown on the second line of the daily timer program setting

(

DAILY) START END MODE

1. 3 0 – –6 – 8 : 3 0 1 7 : 1 5 – 3 H

2. 1 – 1 0 : 0 0 2 2 : 0 0 2 4 H

To set more than one daily timer program, repeat

steps 4 to 7.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

[

• To program the timer to record once a week

indefinitely, move the cursor arrow to the second

line <DAILY> and press the [SET +] or [SET -]

button. (For details, refer to page 30.)

Daily timer program setting screen

screen.

PROGRAM TIMER

DAILY) START END MODE

(

PRESS (MENU)

TO END

1. – – – – – – – : – – – – : – – – – H

2. – – – – – – – : – – – – : – – – – H

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

• If the date and time have not been set, the date and time setting

screen will be shown. Once the correct date and time have been set,

repeat steps 2 and 3.

To end timer programming, press the [MENU] button

twice.

[

The normal screen is restored.

Timer

Program No.

Ⅲ

When the weekly timer program setting screen is displayed,

<WEEKLY> is shown on the second line.

• Press the [SHIFT +] or [SHIFT -] button to set the cursor arrow to

<WEEKLY> and press the [SET +/-] or [SET -] button.

Ⅲ Press the [TIMER REC] button.

[

• The TIMER indication and the daily timer

program numbers light in the VCR's display.

Power is switched off automatically and the VCR

enters the Timer Record Standby mode.

PRESS (MENU)

TO END

TIMER

Weekly timer program setting screen

16.30.00

[

The daily timer program setting screen is displayed.

PROGRAM TIMER

(WEEKLY) START END MODE

• During timer recording, the number of the daily

timer program currently being executed blinks.

VCR's display

( MON

( TUE

( WED

( THU

( F R I

( SAT

( SUN

)

– – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-3 Timer Recording

Daily timer program setting screen

Setting the weekly timer

[RESET/CANCEL] button

[SHIFT–] button

PROGRAM TIMER

DAILY) START END MODE

You can program the VCR to record on a specified day

each week.

Ⅲ Using the same procedure as in daily timer program

setting, select <PROGRAM TIMER> in the main menu to

display the timer program setting screen on the monitor.

(Refer to steps 1 to 3 in daily timer programming.)

[MENU] button

(

1. – – – – – – – : – – – – : – – – – H

2. – – – – – – – : – – – – : – – – – H

3. – – – – – – – : – – – – : – – – – H

4. – – – – – – – : – – – – : – – – – H

5. – – – – – – – : – – – – : – – – – H

6. – – – – – – – : – – – – : – – – – H

7. – – – – – – – : – – – – : – – – – H

8. – – – – – – – : – – – – : – – – – H

PRESS (SHIFT, SET, RESET)

[SHIFT+] button

COUNT/

CLOCK

SHIFT/TRACKING

RESET

/CANCEL

SET/V.LOCK

TIME

MODE

TIMER

REC

AL/PL

RESET

• When the timer program setting screen is displayed,

PRESS (MENU)

TO END

the daily timer program setting screen is shown first.

•

Set the cursor arrow to the second

line <DAILY> and press the [SET +/-

] button.

Display the weekly timer program setting screen.

(<WEEKLY> is shown on the second line.)

Ⅲ Press the [SHIFT +] or [SHIFT -] button to move the

cursor arrow to <DAILY> and press the [SET +] or

[SET -] button.

[TIMER REC] button

[SET–] button

[SET+] button

Weekly timer program setting screen

Stop time (hour)

Stop time (minute)

Record mode

Start time (minute)

Start time (hour)

[

The weekly timer program setting screen is shown.

Alarm input during timer recording

Changing a preset timer program

Select the day of the week you want to record on.

Press the [SHIFT +] or [SHIFT -] button to set the cursor

arrow to the day of the week to be set.

• Press the [SHIFT +] button to move the cursor arrow

down and the [SHIFT -] button to move it up.

Set the selected day of the week.

• If you wish to allow alarm input during timer recording,

turn the function menu switch <TIMER ALARM> to ON.

(Factory setting: ON)

PROGRAM TIMER

(WEEKLY) START END MODE

Press the [TIMER REC] button to turn off the TIMER

indication in the display.

( MON

( TUE

( WED

( THU

( F R I

( SAT

( SUN

)

– – : – – – – : – – – – H

• Turn the switch to OFF if you wish to prohibit alarm input.

Turn the VCR and the monitor on.

Days of the

week

(Monday to

Sunday)

Press the [MENU] button to display the main menu

screen and select <PROGRAM TIMER> with the [SHIFT

+/-] button. Then, press the [SET +/-] button.

Press the [SET +] or [SET -] button.

Canceling timer programming

To stop timer programming

[

The selected day of the week blinks.

PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

• Press the [SET +] button. The start time (hour) blinks.

• Press the [SET -] button. The record mode blinks.

Set the timer.

[The timer program setting screen is displayed.

Blinking

Press the [SHIFT +/-] button to move the cursor arrow to

the program No. or the day of the week to be changed.

Press the [SET +/-] button.

Press the [RESET/CANCEL] button.

The program being set is canceled.

Press the [MENU] button twice.

Press the [SHIFT +] or [SHIFT -] button until the item

PROGRAM TIMER

(WEEKLY) START END MODE

you want to set starts blinking.

• Press the [SHIFT +] button to shift the blinking to

the right.

( MON

( TUE

( WED

( THU

( F R I

( SAT

( SUN

)

– – : – – – – : – – – – H

Select the item to be changed (so that it is blinking) with

the [SHIFT +/-] button.

[

The normal screen mode is restored.

"Start time (hour)"

"Stop time (hour)"

[

"Start time (minute)"

"Stop time (minute)"

Select the next program No.

[

To cancel a preset timer program

[

Change the value with the [SHIFT +/-] button.

"Record mode"

[

PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

Press the [MENU] button twice.

Press the [TIMER REC] button to turn off the TIMER

indication in the display.

• Press the [SHIFT -] button to move the blinking to

the left.

[The normal screen is restored.

Press the [SET +] or [SET -] button to set the value

for the blinking item.

• Press the [SET +] button to increase the value and

the [SHIFT -] button to decrease it.

Turn the VCR and the monitor on.

PROGRAM TIMER

(WEEKLY) START END MODE

Using the VCR in the Timer Record

Standby mode

( MON

( TUE

( WED

( THU

( F R I

( SAT

( SUN

)

– 8 : 3 0 1 9 : 3 0 12 H

– – : – – – – : – – – – H

Press the [MENU] button to display the main menu

screen and select <PROGRAM TIMER> with the [SHIFT

+/-] button. Then, press the [SET +/-] button.

Ⅲ Set the "Start time (hour)", "Start time (minute)", "Stop

time (hour)", "Stop time (minute)" and "Record mode"

with the [SHIFT +/-] and [SET +/-] buttons.

When all values are set, the set program No. is shown

on the VCR's display.

Press the [TIMER REC] button to turn off the TIMER

indication for normal use.

Press the [TIMER REC] button again to turn on the TIMER

indication. The Timer Record Standby mode is engaged.

When all timer recording programs have been executed,

the TIMER indication goes off.

[The timer program setting screen is displayed.

Press the [SHIFT +/–] button to move the cursor arrow

to the program No. or the day of the week to be

canceled.

PRESS (SHIFT, SET, RESET)

PRESS (MENU) TO END

Accessing another day of the week.

PROGRAM TIMER

(WEEKLY) START END MODE

Press the [RESET/CANCEL] button.

• Select the "Record mode" (so that it is blinking) and

press the [SHIFT +] button. Or, select "Start time" (so

that it is blinking) and press the [SHIFT -] button.

( MON

( TUE

( WED

( THU

( F R I

( SAT

( SUN

)

– 8 : 3 0 1 9 : 3 0 12 H

– 8 : 3 0 1 7 : 3 0 – 3 H

– 8 : 3 0 1 9 : 3 0 – 3 H

– 8 : 3 0 2 2 : 3 0 2 4 H

1 0 : 0 0 2 2 : 0 0 2 4 H

– – : – – – – : – – – – H

[

The specified timer program data is canceled.

Press the [MENU] button twice.

The normal screen is restored.

[

The blinking part stops blinking. You may now select

another day of the week.

To set more than one weekly timer program, repeat

steps 2 to 5.

PRESS (SHIFT, SET, RESET)

PRESS (MENU)

TO END

To end timer programming, press the [MENU] button twice.

Timer

[The normal screen is restored.

TIMER

Ⅲ Press the [TIMER REC] button.

[

The TIMER indication lights in the VCR's display.

Power is switched off automatically and the VCR

enters the Timer Record Standby mode.

16.30.00

VCR's display

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-3 Timer Recording

7-4 Alarm Recording

Alarm recording functions during timelapse recording. When an alarm signal is input to the rear panel's ALARM IN terminal,

an index code is recorded on the tape and the VCR automatically switches to the VHS Standard (SP) mode for realtime

recording of the alarm situation. Normal timelapse recording is restored after the preset alarm recording duration has passed.

Notes on timer recording

Ⅲ If you make a mistake when programming

The TIMER indication blinks and the Timer Record

Standby mode is engaged.

The blinking of the TIMER indication differs depending

on the programming status.

Ⅲ During timer recording

The PAUSE/STILL button has no effect.

* Alarm recording will not start from the Pause mode.

ᮢ

To operate the VCR, first press the [TIMER REC]

button.

• When correct programs exist, the indication blinks for

about 10 seconds and then lights.

Ⅲ Timer recording

• If mistakes are detected in all programs, the indication

blinks for about 10 seconds.

Power is turned on about 20 seconds before recording is

programmed to start and the VCR enters the Record-

Pause mode. Recording starts about 2 seconds before

the programmed start time.

“AL” indication

ᮢ

PAL

Incorrect programs are canceled automatically. So, if

necessary, program the timer again.

Ⅲ If no cassette is loaded

TIME MODE

The TIMER and (

) indications blink.

Ⅲ If no programs have been set

The TIMER indication blinks for about 10 seconds. The

Timer Record Standby mode cannot be engaged.

ᮢ

Load a cassette with safety tab in place. Cassettes with

no tab are ejected.

ᮢ

Program the timer.

Ⅲ When the <TAPE END MODE> function menu switch is

set to STOP, REW or EJECT and the tape ends during

timer recording.

• Set the alarm recording mode, alarm recording duration,

buzzer ON/OFF during alarm recording and the operation

mode at the tape end during alarm recording with the

function menu switches. (Menu switches for alarm/sensor

recording mode setting)

During alarm recording, the AL indication is lit on the

display. After alarm recording is complete, the AL

indication blinks on the display to show that an alarm

signal has been input.

Ⅲ If program data overlaps

The Timer Record Standby mode is engaged and the

OVER LAP indication blinks for about 10 seconds.

ᮢ

The cassette is ejected.

Recording will start again when a cassette with safety tab

in place is loaded.

The OVER LAP indication is not shown, however, if the

DAILY timer program and WEEKLY timer program

overlap.

ᮢ

Check the program contents.

● When program data overlaps, the timer recording

priority is determined as follows.

Display "AL"

indication

Extinguished

Lit

Blinking

Lit

Blinking

The daily timer has priority over the weekly timer.

The program with shorter recording time

VHS

Standard (SP)

VHS

Standard (SP)

(3H>12H>24H) has priority.

The program which starts earlier has priority.

Timelapse

mode

Timelapse

mode

Timelapse

mode

Record mode

When the start time is the same, the program with

the lower program No. has priority.

Timelapse

recording

Timelapse

recording

Timelapse

recording

Alarm

recording

Alarm

recording

Alarm signal input

* An index code (VISS) is recorded at the start point of the alarm recording as an alarm cue signal.

* During alarm recording, a +12 V signal is output from the rear panel’s ALARM REC OUT terminal.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-4 Alarm Recording

7-5 Sensor Recording

Preparation

Sensor recording is executed only when the VCR is in the Stop mode (Stop or Timer Record Standby mode) and an alarm

signal is input to the rear panel’s ALARM IN terminal.

Connect an alarm sensor to the rear panel’s alarm input terminal.

Perform the settings for sensor recording in the same way as for "Alarm Recording" on page 33.

Press the [OPERATE] button to turn the operating mode

on.

A LARM / SENSOR REC MODE

The mechanism of the SR-L910E/EK cannot be guaranteed if the sensor recording function is used frequently (100 times/

day or more). If alarm inputs are frequent, use the alarm recording function instead and carry out regular maintenance/

inspection and parts replacement.

Alarm recording function

Setting the function menu switches for the Alarm

Record mode

(ALARM REC)

(SENSOR REC)

(TIMER ALARM)

(DURATION)

OFF

180SEC

OFF

Alarm recording duration

Buzzer

Press the [MENU] button to display the main menu

screen on the monitor.

(BUZZER)

(TAPE END MODE)

STOP

Tape end mode

Press the [SHIFT +/-] button to select <FUNCTION> and

press the [SET +/-] button.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Preparation

Connect an alarm sensor to the rear panel’s alarm input terminal.

[

The function menu switch setting screen is

displayed.

Alarm/sensor recording

mode setting screen

Press the [OPERATE] button to turn the operating mode

on.

Press the [SHIFT +/-] button to display the alarm/sensor

recording mode setting screen.

A LARM / SENSOR REC MODE

Setting the function menu switches for the Sensor

Record mode

Sensor recording function

Select the timelapse recording mode (L12H or L24H)

with the [TIME MODE] button on the front panel.

(ALARM REC)

(SENSOR REC)

(TIMER ALARM)

(DURATION)

OFF

180SEC

OFF

Select the item to be set with the [SHIFT +/-] button. Set

the value with the [SET +/-] button.

Sensor recording duration

Buzzer

[

The selected recording mode is shown on the VCR's

display and the on-screen display.

Press the [MENU] button to display the main menu

screen.

(BUZZER)

(TAPE END MODE)

STOP

• Set <ALARM REC> to ON to activate the alarm

recording function. The AL REC indication in the

display lights.

Tape end mode

Follow the procedures for "Basic recording operations"

on page 27.

Press the [SHIFT +/-] button to select <FUNCTION>

and press the [SET +/-] button.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

• Set the alarm recording duration.

[

The function menu switch setting screen is

displayed.

When an alarm signal is input to the rear panel's

ALARM IN terminal, alarm recording is executed as

specified.

Alarm/sensor recording

mode setting screen

Set duration to 5 sec., 15 sec., 30 sec., 60 sec.,

120 sec., 180 sec., TAPE END or MANUAL (for as

long as alarm signals are input).

Press the [SHIFT +/-] button to display the alarm/sensor

recording mode setting screen.

To stop alarm recording and clear the alarm indication,

press the [AL/PL RESET] button.

After completing function menu switch setting, press the

[MENU] button twice.

* When the alarm recording time is set to MANUAL,

the alarm cue signal (index code) will not be

recorded correctly if alarm input lasts for less than

30 seconds.

* When alarm recording duration is set with an

external switcher, set the alarm recording duration

to MANUAL.

Select the item to be set with the [SHIFT +/-] button. Set

the value with the [SET +/-] button.

• When the AL indication is lit on the display (during

alarm recording), press the [AL/PL RESET] button to

stop alarm recording. Timelapse recording is resumed

and the AL indication goes out. If the alarm buzzer is

on, it stops as well.

• When the AL indication is blinking on the display,

press the [AL/PL RESET] button. The AL indication

goes out.

[

The normal screen is restored.

• Set the <SENSOR REC> to ON to activate the sensor

recording function. The SENSOR REC indication in

the display lights.

Check the time and data shown on the monitor's on-

screen display.

Ⅲ If the time and date are not shown on the monitor or if

you need to change the display position, use the

<POSITION> function menu switch.

• Set the sensor recording duration.

Set <DURATION> to 5 sec., 15 sec., 30 sec., 60 sec.,

120 sec., 180 sec., TAPE END or MANUAL (for as

long as alarm signals are input).

• To sound the buzzer during alarm recording, set

<BUZZER> to ON.

• Set the operation mode at tape end in the case when

alarm recording is executed even once with the menu

switch <TAPE END MODE> on the alarm/sensor

recording mode setting screen.

• When an alarm signal is input to the rear panel's

When the AL indication goes out, press the [AL/PL

RESET] button again to reset the alarm input/power loss

data.

ALARM IN terminal, recording starts automatically in

the specified record mode and the AL indication is lit.

• After the specified recording duration expires,

recording stops and the Stop mode is engaged.

* The sensor recording time will be shorter than the

specified value.

* When the sensor recording time is set to MANUAL,

the alarm cue signal (index code) will not be

recorded correctly if alarm input lasts for less than

30 seconds.

* When sensor recording duration is set with an

external switcher, set the sensor recording duration

to MANUAL.

STOP

REW

: The tape stops.

: The tape is rewound to the beginning and

stops.

* There may be some picture distortion at the start or

end of an alarm recording. This is not a malfunction.

* Because sensor recording starts from the Stop

mode, it takes several seconds from the time an

alarm input is received to the time recording actually

starts.

REPEAT : Recording continues from the beginning of

the tape.

EJECT : The tape is ejected.

To stop sensor recording and clear the AL indication,

press the [AL/PL RESET] button.

• To sound the buzzer during sensor recording, set

<BUZZER> to ON.

• Set the operation mode at tape end in the case when

sensor recording is executed even once with the menu

switch <TAPE END MODE> on the alarm/sensor

recording mode setting screen.

After setting the function menu switches, press the

[MENU] button twice.

To disable sensor recording, set menu switch

<SENSOR REC> to OFF.

[The normal screen is restored.

Check the time and data shown on the monitor's on-

screen display.

During playback, there may be some noise or picture

distortion at the point where one sensor recording

stops and another starts. This is not a malfunction.

STOP : The tape stops.

REW

: The tape is rewound to the beginning and

stops.

Ⅲ If the time and date are not shown on the monitor or if

REPEAT: Sensor recording continues from the

beginning of the tape.

EJECT : The tape is ejected.

you want to change the display position, use the

<POSITION> function menu switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-6 Repeat Recording

7-7 Series Recording

The series recording function facilitates recording over much longer periods using several connected SR-L910E/EKs.

As soon as the tape ends in one VCR, the next VCR in the series starts recording.

When the tape reaches the end during recording, it is automatically rewound and recording starts again from the beginning.

To execute repeat recording, set <TAPE END MODE>

on the VTR mode 1 setting screen to REPEAT.

Connections

VTR MODE 1

(SHARPNESS)

(VIDEO MODE)

(AUTO REC)

(REC CHECK)

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

NORMAL

AUTO

OFF

AUTO

REPEAT

OFF

ALARM

OFF

Auto recording

check function

Setting the function menu switch <TAPE END MODE>

on the alarm/sensor recording mode setting screen

Connect the first VCR’s [SERIES/CLOCK OUT] terminal

to the second VCR’s [SERIES/CLOCK IN] terminal.

Connect the second VCR’s [SERIES/CLOCK OUT]

terminal to the third VCR’s [SERIES/CLOCK IN]

terminal. Repeat for all connected VCRs. Connect the

VCR’s [COM] terminals as well.

Rear panel

Tape end mode

Set to

REPEAT

• When the tape ends during recording in the case when

alarm or sensor recording is executed even once, the

tape stops or rewinds and stops at the beginning if this

menu switch set to “STOP” or “REW”,.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Connect a video camera and/or other source equipment

to the first VCR’s video and audio input connectors.

Connect the first VCR’s video and audio output

connectors to the second VCR’s video and audio input

connectors. Connect the second VCR’s video and audio

output connectors to the third VCR’s video and audio

input connectors. Repeat for all connected VCRs.

Connect the last VCR’s video and audio output

connectors to the monitor’s video and audio input

connectors.

If this menu switch is set to "EJECT", the tape is

ejected.

To continue repeat recording even when alarm/

sensor recording is executed, set this menu

switch to “REPEAT” .

SERIES/CLOCK

IN OUT

SERIES/CLOCK

IN OUT

SERIES/CLOCK

IN OUT

COM

VTR mode 1 setting screen

* When repeat recording is performed, the previously-

recorded alarm recording is erased.

First VCR

Second VCR

Third VCR

Operations

Audio input signal

Video input signal

Auto Recording Check function

Function menu switch <REC CHECK> set to AUTO

Set the <TERMINAL SEL 1> function menu switch on

the VTR mode 2 setting screen to “SERIES” (series

recording) for all connected VCRs.

This function automatically checks recording quality at

the beginning of the tape during repeat recording.

• To activate the Auto Recording Check function, set the

<REC CHECK> function menu switch in the VTR mode 1

setting screen to AUTO.

Rear

panel

Repeat recording

Normal

Beginning of

the tape

Recording

check

Recording

Normal

O U T

VTR MODE 2

(SUMMER TIME)

(TERMINAL SEL 1)

(TERMINAL SEL 2)

(REC REMAIN))

(NOISELESS PLAY)

(CAMERA SW)

OFF

SERIES

WARN

OFF

Defective

TERMINAL

SEL 1

Set to

SERIES

First VCR

Auto head

cleaning

REC

REMAIN

Operation of the Auto Recording Check function

• The recorded section at the beginning of the tape is

automatically played back in the Repeat Record mode

and the FM level recorded on the tape is checked. If

the level is satisfactory, recording continues.

• If recording quality is deemed inferior, the heads are

cleaned automatically. After several seconds, recording

is checked again.

If recording quality is still unsatisfactory after two

consecutive checks, the error indicator E-09 is shown

in the display and recording continues.

Recording

check

(CAM SW WIDTH)

5msec

Auto recording

for several

seconds

VTR mode-2

Recording

setting screen

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Defective

O U T

Auto head

cleaning

Recording

• Output a series recording signal from the [SERIES/

CLOCK OUT] terminal to start recording. Select the

timing with the <REC REMAIN> function menu switch.

• When set to “OFF”, the series recording signal is

output when the tape ends.

• When set to “180S”, the series recording signal is

output about 3 minutes before the tape ends.

• When set to “360S”, the series recording signal is

output about 6 minutes before the tape ends.

Display

Error indicator E-09 display

Second VCR

O U T

To end function setting, press the MENU button to close

the menu display and restore the time/date display.

Last VCR

Load cassettes with safety tab in place in all connected

VCRs.

Video output

Audio output

Engage the Record mode on the first VCR.

Turn on all connected VCRs and put them in the

Standby mode. This allows you to check picture and

sound on the monitor.

Monitor TV

When the recording is complete on the first VCR, the

second VCR automatically starts recording. This is

repeated for all connected VCRs.

Note

• If a cassette has not been loaded in any VCR in the series, series recording will stop when that VCR is reached.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 RECORDING

7-8 Recording with External VCR Activation Signal

7-9 How to Restore Recording After Power Failure

Recording start/stop can be controlled externally by inputting a VCR activation signal to the [SERIES/CLOCK IN] terminal on

the SR-L910E/EK’s rear panel.

If a power failure occurs during recording, recording will

restart in the same mode as soon as power is restored.

VTR MODE 1

(SHARPNESS)

(VIDEO MODE)

(AUTO REC)

(REC CHECK)

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

To use this function, set the function menu switch <AUTO

REC> to ON.

NORMAL

AUTO

MANUAL

REPEAT

OFF

ALARM

OFF

Rear panel

Set to

AUTO REC

* If this function menu switch is set to ON and power is

turned off and on again in the Stop mode, the VCR

enters the Record mode automatically. Be careful.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

To [COM] terminal

To [SERIES/CLOCK IN] terminal

External control

equipment

VTR mode 1 setting screen

7-10 External Timer Recording

Connection

External timer recording can be performed by connecting the SR-L910E/EK to an external timer.

Connect the [SERIES/CLOCK IN] terminal and [COM]

terminal on the SR-L910E/EK’s rear panel to the external

control equipment.

VCR control signal (ground signal)

Check that a cassette is loaded in the VCR.

* If the cassette’s safety tab has been removed,

recording will not take place.

Set the function menu switch <AUTO REC> to ON.

Power is supplied from the external timer at the

specified time and recording starts.

* This function does not work when the Timer Record

mode is engaged.

LV: 0 V

Start of recording

Stop or power off

7-11 Tape End Buzzer

Operation

When set to ON, a buzzer sounds when the tape ends

during recording. To set the buzzer sound on, set the

function menu switch <TAPE END BUZZER> to ON.

VTR MODE

(SHARPNESS)

(VIDEO MODE)

(AUTO REC)

NORMAL

AUTO

MANUAL

REPEAT

OFF

ALARM

OFF

Set the function menu switch <TERMINAL SEL 1> to

“EXT” to use the external recording function.

VTR MODE 2

(SUMMER TIME)

OFF

EXT

WARN

OFF

(TERMINAL SEL 1)

TERMINAL

Set to EXT.

(REC CHECK)

Select the tape end buzzer output timing with the <REC

REMAIN> function switch on the VTR mode 2 setting

screen.

(TERMINAL SEL 2)

SEL 1

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

Press the MENU button to switch the on-screen display

to the time/date display.

(External

recording

function)

(REC REMAIN))

(NOISELESS PLAY)

(CAMERA SW)

TAPE END

BUZZER

Set to

Load a cassette with a safety tab in place and engage

the Stop mode, the Pause mode or turn the operating

mode off.

(CAM SW WIDTH)

5msec

OFF : Tape end

PRESS (SHIFT, SET)

PRESS (MENU) TO END

PRESS (SHIFT, SET)

PRESS (MENU) TO END

180S : Remaining time is about 3 minutes

360S : Remaining time is about 6 minutes

• When a VCR activation signal (ground input) is input to

the rear panel’s [SERIES/CLOCK IN] terminal,

recording starts automatically and continues for as

long as the activation signal is input.

VTR mode 1 setting screen

When the tape reaches the specified position, the

following signals are output in addition to the tape end

buzzer sound.

VTR mode 2 setting screen

When the activation signal stops, the Stop or Pause

mode is engaged or the operating mode is turned off

(depending on the VCR status before the external

recording function is used).

• Tape end signal from the rear panel's [TAPE END

OUT] terminal

• Series recording signal from the rear panel's [SERIES

OUT] terminal during series recording

• This function has no effect in the Timer Record

Standby mode.

• If a VCR activation signal is input while the unit is

already recording (started with the [REC] button),

recording continues and stops when the activation

signal is no longer input.

• When the activation signal is input again, recording

starts.

• "End" indication in the counter display

To stop the buzzer sound, you can set the <TAPE END

BUZZER> function menu switch to OFF, turn off the

power, or press another operation button.

During repeat recording and AUTO REW, the buzzer

sounds for about 2 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

[STOP/EJECT] button

[OPERATE] button

[REVERSE] button

[PLAY] button

PAL

[PLAY] button

Playback mode

indication

[TIME MODE] button

[FF] button

[REW] button

[PAUSE/STILL] button

8-1 Preparation

8-2 Playback

8-3 Special-Effects Playback

Press the [OPERATE] button to turn the operating mode

on.

Connection

Still and field/frame advance

Reverse playback

[

The [OPERATE] indicator lights.

Make sure the output connectors on the rear panel are

properly connected.

Press the [PAUSE/STILL] button during playback.

Press the [REVERSE] button in the Play or Still mode.

Press the [TIME MODE] button to set the Play mode to

the VHS Standard (3H).

The 3H indicator is shown on the display.

The still indicator is shown on the display and a

still picture is displayed.

The reverse indicator is shown on the display

and the Reverse mode is engaged.

Function menu switch settings

Ⅲ Each time the [PAUSE/STILL] button is pressed in the

Still mode, the picture is advanced one field.

Ⅲ Pressing and holding the [PAUSE/STILL] button for

more than 2 seconds in the Still mode, advances the

picture field by field in the forward

Reverse playback is executed at VHS SP mode speed.

When the play time mode is set to 3H,L12H, L24H, 12H

or 24H, reverse playback is executed at the VHS SP

• To use playback in the Timelapse Play mode, make

sure the same mode (L12H or L24H) is set for

playback as was used for timelapse recording.

Set the function menu switches as required.

[SHARPNESS] . . . Factory setting: NORMAL

Set to SHARP to emphasize contours for sharper

playback pictures.

mode’s speed.

Load the recorded cassette correctly.

* No sound is output.

* If a cassette is loaded when the power is off, power is

switched on automatically (auto-power on function).

If the cassette's safety tab has been removed, power is

switched on and play starts automatically (auto play

function).

direction (continuous field advance

playback).

* No sound is output.

To return to the Normal Play mode, press the [PLAY]

button.

[INDEX SEARCH] . . . Factory setting: OFF

To enable or disable index search.

• Set to ON to search the alarm-recorded positions

(index code).

•

In the Field Advance Playback mode, pressing the

[PAUSE/STILL] button engages the Still mode.

Press the [PLAY] button to restore the Normal Play

mode.

Press the [PLAY] button to start play.

The play indicator is shown on the display and

the Play mode is engaged.

[NOISELESS PLAY] ... Factory setting: OFF

Set to "ON" to enable frame transport playback when

the picture recorded in the 12/24H Timelapse mode

contains much noise and is difficult to see. However,

there will be no sound output.

The Stop mode is automatically engaged if the VCR

remains in the Still mode for 5 minutes (approx.).

• Cassettes recorded in the VHS Long Play mode

(LP) are played back in the VHS Long Play mode.

• "6H" is shown in the display.

Shuttle search (reverse and fast-forward) playback

Notes

•

When a tape recorded in the VHS standard

(3H) mode is played back in the Timelapse

mode, noise appears in the playback picture.

Tapes recorded in the Long Play (LP) mode

can be played back only.

To stop playback

Reverse shuttle search

Fast-forward shuttle search

Press the [REW] button during play.

Press the [FF] button during playback.

Press the [STOP] button.

The rewind search indicator is shown on

the display and the Reverse Shuttle

Search mode is engaged.

The fast-forward search indicator is shown

on the display and the Fast-Forward

Shuttle Search mode is engaged.

* No sound is output.

The tape stops and the Stop mode is engaged.

•

Audio playback of a timelapse-recorded tape

• Due to the difference in tape speed, audio signals

cannot be monitored when a tape recorded in the

L12H or L24H Timelapse mode is played back in the

VHS Standard (3H) mode.

To monitor audio recorded in the Timelapse mode,

play back the tape in the same mode (L12H or L24H)

as it was recorded in.

Still, Reverse Play and Shuttle Search modes

are not available with LP tapes.

* No sound is output.

Shuttle search operations vary according to how the [REW] or [FF] button is pressed. Refer to the table below for details.

Menu check during playback

Operation of the [REW] or

•

When the [MENU] button is pressed during

playback, the monitor screen display switches from

the playback picture to the input video signal (EE

picture) and the main menu is shown on the screen.

This means that even during playback you can

check menu contents.

Tape recorded in the Standard mode or the Timelapse mode

[FF] button

Press the button once.

9 times normal speed (lock). Pressing the [PLAY] button restores the Normal Play mode.

9 times normal speed. Releasing the finger restores the Normal Play mode.

Hold the button pressed

for more than 2 seconds.

Press the [MENU] button again to restore the

playback picture.

Note

Still, Reverse Play and Shuttle Search modes are not available with tapes recorded in the Long Play (LP) mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

9 TROUBLESHOOTING

8-4 Index Search

9-1 Error Indication

Searching the index code (VISS signal) recorded at the

start of alarm recording helps you quickly locate alarm

recordings (index search function).

When reverse shuttle search or fast-forward shuttle

search is executed, the Index Search mode is engaged.

When an index code is located, playback starts

automatically.

When the function menu switch [NOISELESS PLAY] is

set to OFF, playback takes place in the 3H mode

regardless of the set playback mode. When set to ON,

playback takes place in the playback mode set with the

TIME MODE button.

Error indications are shown on the display whenever there

are problems with cassette loading, unloading or

mechanism operation.

Display section

• To use the index search function, set the function menu

switch [INDEX SEARCH] to ON.

When a problem occurs, the error indication E-

blinks.

– –

TIME MODE

When any one of the error indications is shown, a 12 V

warning signal is output from the rear panel's WARNING

OUT connector (for E-01 to E07, and E-11 during

recording) (only when the <TERMINAL SEL 2> menu

function switch is set to "WARN").

VTR MODE

(SHARPNESS)

(VIDEO MODE)

(AUTO REC)

NORMAL

AUTO

OFF

Error indication

(REC CHECK)

MANUAL

STOP

ALARM

OFF

To engage the Reverse Shuttle Search mode or the

Fast-Forward Shuttle Search mode, press the

[REW] or [FF] button once during playback.

When the function menu switch <WARNING BUZZER>

is set to ON, the buzzer sounds whenever a problem

occurs (for E-01 to E07, and E-11 during recording).

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

INDEX

Set to

VTR MODE 1

(SHARPNESS)

(VIDEO MODE)

(AUTO REC)

(REC CHECK)

(TAPE END MODE)

(INDEX SEARCH)

(INDEX AL/SKIP)

(TAPE END BUZZER)

(WARNING BUZZER)

NORMAL

AUTO

OFF

MANUAL

REPEAT

OFF

ALARM

OFF

When an index code is searched in the Fast-Forward

mode or the Rewind mode, the Stop mode is

automatically engaged when the code is located.

PRESS (SHIFT, SET)

PRESS (MENU) TO END

When an error indication appears or the buzzer

sounds, turn the operating mode off and then on again

to clear the error indication and buzzer sound.

VTR mode 1 setting screen

• The VISS indicator is shown on the display whenever

the Index Search mode is engaged.

When the error indication E-

is shown, turning the

Buzzer sound

– –

operating mode on again may not clear the problem. In

this case, consult your local JVC dealer (for E-01 to E-

07).

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Index Search does not function in the Auto Rewind

mode.

VTR mode 1 setting screen

Error

Contents

VCR operation

Measures

indication

E-01

E-02

E-03

E-04

E-05

E-06

E-07

E-09

8-5 Tracking/V. Lock Adjustment

Problem with loading operation

Problem with unloading operation

Problem with supply reel rotation

Problem with drum rotation

The operating mode is turned off.

Turn the operating mode on again.

[TRACKING +/-] button

Problem with take-up reel rotation

Problem with capstan rotation

Problem with eject operation

PAL

Error with recording check

(inferior recording performance)

Cleans the heads with the VCR's

head cleaner.

Cleans the heads with the head

cleaning tape, then check the

recording picture quality again. The

tape may be defective. Replace the

tape and check again.

[V. LOCK +/-] button

If the picture quality is still inferior,

consult your local JVC dealer.

When noise appears in the picture in the Play/

Field Advance Play/Search mode

When the picture moves up and down in the

Still mode

Tracking can only be adjusted in the following modes:

• VHS Standard (3H) Play, Long Play (LP), 12H and

24H mode

• Field Advance Playback with the [PAUSE/STILL]

button

• Search mode

Press the [V. LOCK +/-] button to minimize vertical jitter.

E-10

E-11

Insufficient capacity of the built-in

battery for backup (Displayed

only in the operating off mode.)

Contact your local JVC dealer to

replace the built-in battery.

—

No video signals input to the

[VIDEO IN] connector

Input video signals.

Ⅲ

Press the [TRACKING +/-] button to reduce noise.

To restore the tracking preset mode, press the + and -

buttons simultaneously.

This unit uses a microprocessor and may not function properly if there is external noise or interference. In this case, turn

the operating mode off and unplug the power cord from the AC outlet. Then plug the power cord in again and check

operation.

* Tracking adjustment cannot be performed in the

L12H/L24H Timelapse Play modes.

Download from Www.Somanuals.com. All Manuals Search And Download.

9 TROUBLESHOOTING

10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD

Functions that can be controlled with front panel buttons and switches can also be controlled from a personal computer when

the optional SA-K97U RS-232C interface board is installed. Operation status can also be monitored on the computer.

9-2 No Error Indication

Symptoms

Causes

Remedies

10-1. Installation of the SA-K97U

No power is supplied.

q Is the power cord disconnected?

q Connect the power cord to an AC

outlet.

Rear panel

The procedure is shown below. However, to avoid

electric shock or injury, contact your local JVC

service center for details.

q Is the TIMER indication shown?

q Press the REC TIMER button so that

the TIMER indication goes out.

q Release the Operation Lock mode.

q Is the Operation Lock mode

engaged?

MIC

VIDEO

AUDIO

Note:

Operation buttons have no effect

during recording and playback.

Is the Operation Lock mode

engaged?

SA-K97U

installation

section

Release the Operation Lock mode.

Connect the monitor correctly.

When installing this board, be careful not to injure

yourself on sharp edges and metal parts inside

the VCR.

REMOTE

OUT

No picture is shown during

playback.

Is the monitor connected correctly?

Noise appears in the picture in

the Shuttle Search mode and

Still mode.

This is not a malfunction.

Ⅵ Before installing the board, turn the power off and unplug

the power cord from an AC outlet.

—

Top cover

1. Detach the top cover.

Remove the 5 screws securing the top cover and lift it off.

Noise appears in part of the

playback picture.

q Is the tracking adjusted properly?

Adjust the tracking with the

[TRACKING+/–] button.

Tracking adjustment is not possible in

the Timelapse Play mode.

q Are you playing back a tape

recorded in the VHS SP (3H)

mode in the Timelapse mode?

In this case, noise appears in the

playing picture.

2. Detach the plate in the VCR.

Remove the 2 screws on the rear panel. Detach the plate

from the inside of the VCR.

Screws

Dust may have accumulated on the

video heads.

3. Connect the SA-K97U’s connector to the VCR.

Insert the SA-K97U connector into the connector (CN607)

on the board in the VCR using a tool such as a pincette.

When the cassette is played

back, the picture becomes rough

or disappears.

Clean the video heads. Consult your

nearest JVC dealer.

Plate

• During insertion, make sure the connector is aligned

properly.

• Press both edges of the connector to insert it securely.

During playback, sound is high-

pitched and hard to hear.

Are you playing back a tape

recorded in the 12H or 24H

Timelapse mode in the VHS

Standard (3H) mode? In this case,

sound is high-pitched.

Play back the tape in the same mode

(12H or 24H) as that used for recording.

4. Install the SA-K97U in the VCR.

Make sure the SA-K97U bracket is facing the correct

direction and align the positioning holes on the bracket

with the projections (2 positions) on the VCR’s case.

Secure the bracket with the 2 screws removed in step 2.

Recording is impossible.

Has the cassette safety tab been

removed?

Paste a piece of cellophane tape over

the hole.

SA-K97U

RS-232C board

Positioning

holes

(2 positions)

Projection sections

(2 positions)

Timer recording is working.

q Is the clock set correctly? Is the

timer properly programmed?

q Is the TIMER indication lit?

q Check again.

q Check it again.

5. Attach the top cover as before.

Attach the top cover to the VCR using the 5 screws

removed in step 1.

Screws (2)

The clock cannot be set.

Is the TIMER indication lit?

Press the TIMER button so that the

TIMER indication goes out.

Make sure you use the correct screws.

Tape running sound is heard in

the Record, Play, FF and REW

modes.

This is normal.

If you feel it is too noisy, install the VCR

in a rack.

The time/date is not shown.

q Is the clock set?

q Set the clock.

q Is the <POSITION> function

menu switch set to OFF?

q Set the <POSITION> function menu

switch to another position.

During recording, repeat

recording does not take place.

Is the function menu switch <TAPE

END MODE> in the alarm/sensor

recording mode setting screen set to

STOP, EJECT or REW?

If so, when the tape ends during

recording in the case when alarm

recording is executed even once, it

stops or is rewound to the beginning

and stops.

To continue repeat recording even when

the alarm recording is executed, set the

function menu switch <TAPE END

MODE> on the alarm/sensor recording

mode setting screen to REPEAT.

MIC

VIDEO

AUDIO

SA-K97U

REMOTE

OUT

Camera image is not switched.

Is the <CAM SW> function menu

switch set to "OFF"?

When setting the camera switching

timing, set it to "1 FIELD" or "1 FRAME".

Download from Www.Somanuals.com. All Manuals Search And Download.

10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD

10-2. SA-K97U Specifications

10-3. SA-K97U RS-232C Protocol & Commands

9-pin connector specifications

RS-232C protocol

JVC base table

Pin NO.

Signals

RXD

Operations

Receive data

Direction of signals

VTR p CPU

Data “0” ENTER

COMPLE-

TION

Data “1” CLEAR

ERROR

TXD

Transmit data

VTR [ CPU

ERROR

Data “2”

COUNT

RESET

DTR

Data terminal ready

Signal ground

VTR [ CPU

CASSETTE

OUT

Data “3”

EJECT

GND

DSR

Data “4”

NOT

TARGET

Data “5”

Data set ready

VTR p CPU

Data “6”

CLEAR

JVC

TABLE1 ON

Output level

ON : +5 V or more

OFF: –5 V or less

Data “7”

STATUS

SENSE

JVC

TABLE1 OFF

Data “8”

Data “9”

ACK

NAK

PLAY

REV

PLAY

REC

REQUEST

Data format

REC

PAUSE

VTR INQ

Mode

: Non-synchronized

REW

Character length

Data rate

: 8 bits

F-FIELD

STEP

: 1200, 2400, 4800, 9600 bps

(switched with function menu switch, set to 9600 bps before shipment)

: No

: 1 bit

STOP

STILL

Parity check

Stop bit

JVC table-1

Data “0” ENTER

TIMER

ON SCREEN

VISS

FWD

FRAME CODE

(COUNT)

COMPLE-

TION

Data “1” CLEAR

TIMER

OFF

ON SCREEN

OFF

VISS

REV

REC

CHECK

DEVICE

TYPE

AL . PL

RESET

ERROR

Data “2”

Data “3”

Data “4”

Data “5”

Data “6”

Data “7”

PRG/CLK

SHFT+

SHFT–

SET+

ROM VER

HOUR METER COUNT

SENSE

RESET

CASSETTE

OUT

EJECT SEARCH

(VISS)

ON SCREEN

SELECT

NOT

TARGET

PL .AL COUNT

SENSE

ALARM

INPUT

CLEAR

SET–

TL STATUS

SET

TL STATUS

SENSE

JVC

TABLE1 ON

CANCEL

STATUS

SENSE

JVC

TABLE1 OFF

Data “8”

Data “9”

OPE LOCK

ACK

NAK

PLAY

REV

PLAY

OPE LOCK

OFF

REC

REQUEST

OPERATE ON

OPERATE OFF

REC

PAUSE

VTR INQ

REW

MODE

SHIFT

F-FIELD

STEP

MODE

DATE SET

TIME SET

DATE S

TIME S

STOP

STILL

Download from Www.Somanuals.com. All Manuals Search And Download.

10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD

After transmitting the VISS SEARCH command (17), transmit the appropriate 2-byte numeric data (from 30H to 39H), the data input command

(40H), and either FF (ABH) or REW (ACH). All commands should be transmitted separately one byte at a time with “ACK” (0AH) confirmation

from the VCR after each transmission.

10-3. SA-K97U RS-232C Protocol & Commands

(17) VISS SEARCH (B3H)

: To search for a designated INDEX point on the tape.

This section provides technical data for programmers.

The VCR starts INDEX search after returning “ACK”. When the specified point is reached, the VCR returns COMPLETION (01H). If the end

or beginning of the tape is reached before the specified point, the VCR returns NOT TARGET (05H).

This command differs from commands (15) and (16) only in that the FF (ABH) or REW (ACH) command is included separately.

Command description

To use the commands described in the following pages, prepare the VCR for communications as follows:

2-2 VCR setting commands

Transmit the command “JVC TABLE 1 ON” (F6H) to the VCR. The VCR will return “ACK” (0AH).

The VCR can now receive any command described in this section. To cancel the communications mode, transmit the command “JVC

TABLE 1 OFF” (F7H).

Commands available include control of recording/playback mode setting, timelapse VCR operation mode setting, date and time setting, timer

programming, on-screen setting, and others.

5 Recording/playback mode setting commands

Two commands are available. One allows you to rotate through recording/playback modes, the other permits you to directly select the

mode.

2-1 VCR control commands

Commands (1) through (12) are 1-byte commands. The VCR will return “ACK” (0AH) when the command is received. Confirm that “ACK”

(0AH) has been returned before transmitting the next command.

(1) MODE SHIFT (7DH)

: Switches from one recording/playback mode to the next each time the command is transmitted.

Use the TL STATUS SENSE (D6H) command to check the current mode. (See section 2-3 (8).)

Transmit 1 byte at a time with “ACK” (0AH) confirmation from the VCR after each transmission.

: Sets recording/playback mode directly.

After transmitting this command, transmit the appropriate 2-byte ASCII codes (from 30H to 39H)

and the data input command (40H). Correspondence of ASCII codes with recording/playback

modes is as shown below.

(1) OPERATE ON (7BH)

OPERATE OFF (7CH)

(2) PLAY (3AH)

(3) STILL (4FH)

(4) STOP (3FH)

(5) FF (ABH)

: VCR operating mode is turned “ON”.

: VCR operating mode is turned “OFF”.

: Playback

: Pause/Still

(2) MODE (7EH)

: Stop

: FF/Forward search in the Play mode. (INDEX Search when Menu switch <INDEX SRCH> is set to

ON.)

Modes in parentheses are

available only in the Play mode.

(6) REW (ACH)

: REW/Reverse search in the Play mode. (INDEX Search when Menu switch <INDEX SRCH> is set

to ON.)

: Reverse playback at normal speed

: Timer “ON”

: Timer “OFF”

: Operation lock “ON”

: Operation lock “OFF”

: Cassette ejection

Eg: To set to “L24H”.

(7) REV PLAY (4AH)

(8) TIMER ON (60H)

TIMER OFF (61H)

(9) OPE LOCK ON (69H)

OPE LOCK OFF (6AH)

(10) EJECT (A3H)

Mode 1st byte 2nd byte

(LP

L12H

L24H

30H

31H)

32H

33H

TXD

RXD

7EH

30H

33H

40H

Time

0AH

VCR returns “ACK”, and then returns CASSETT OUT (03H) after cassette has been ejected.

: Engages field advance when the VCR is in the Still mode. The tape is advanced by one field in the

3H/Timelapse mode.

(11) F-FIELD STEP (ADH)

5 Timelapse VCR operation mode setting commands

If the VCR is in any other mode, the Still mode is engaged.

: Engages REC CHECK. (function is the same as when locally controlled on the VCR.)

(12) REC CHECK (C1H)

(1) TL STATUS SET (86H)

: Set the timelapse VCR operation mode with 3-byte data. Send one byte at a time by checking

ACK (0AH) from the VCR.

Before transmitting either of the following commands ((13) or (14)), first transmit REC/DUB REQUEST (FAH), and confirm that “ACK” is

returned by the VCR.

TXD

RXD

86H

1st byte

2nd byte

3rd byte

(13) REC (CAH)

(14) REC PAUSE (CBH)

: Starts recording. The VCR returns “ACK”.

: Engages Record-Pause mode. The VCR returns “ACK”.

• To re-start recording, transmit REC (FAH+CAH).

Time

0AH

• To cancel Record-Pause, transmit STOP (3FH). The VCR will enter the Stop mode.

• The setting details for the first to the third bytes are shown below.

However, if the loaded cassette’s safety tab has been removed, recording is not possible regardless of the fact that “ACK” has been

returned. Use the STATUS SENSE (D7H) command to confirm tape status. (See Section 2-3 (9)).

1st byte

2nd byte

BIT

When the bit is “1”

BIT

When the bit is “1”

After transmitting commands VISS FWD (15) or VISS REV (16), transmit the appropriate numeric data (1-byte ASCII codes from 30H to 39H)

and the data input command (40H).

ASCII codes “30H – 39H” correspond with the numbers “0 – 9” (ie.: 0: 30H, 1: 31H, ... 9: 39H).

Each byte of numeric data and the data input command should be transmitted separately with “ACK” (0AH) confirmation from the VCR after

each transmission. The VCR’s Menu switch <INDEX SRCH> is set to OFF.

Repeat recording function ON

Unused

Auto REC mode ON

Auto rewind ON

Unused

Alarm recording function ON

Unused

Sensor recording function ON

External recording function ON

Unused

(15) VISS FWD (B0H)

(16) VISS REV (B1H)

: To advance the tape in the forward search mode to the designated alarm-input point. The alarm

point’s 2-byte numeric data should be input after transmission of this command.

: To reverse the tape in the reverse search mode to the designated alarm-input point. The alarm

point’s 2-byte numeric data should be input after transmission of this command.

Series recording function ON

Tape end buzzer ON during recording

Alarm recording buzzer ON

Index search function ON

Warning buzzer ON

Eg: To search for the 3rd alarm-input point from the current position.

3rd byte

BIT

When the bit is “1”

TXD

RXD

B0H

30H

33H

40H

Time

Unused

0AH

01H (or 05H)

Search start

Summer time compensation ON

Unused

Video mode set to “B/W” (black and white)

Unused

The VCR starts INDEX search after returning “ACK”. When the specified point is reached, the VCR returns COMPLETION (01H). If the end

or beginning of the tape is reached before the specified point, the VCR returns NOT TARGET (05H). (Sending either the 30H,30H or

30H,31H command will cause the VCR to search for the 1st alarm-input point).

Download from Www.Somanuals.com. All Manuals Search And Download.

10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD

5 Date and time setting commands

2-3 Commands for VCR status verification

(1) DATE SET (8EH)

: Set the current date (month, day, year) for the VCR. After this command (8EH) is sent, input 1-

byte numerical data (30H — 39H).

(1) DATE SENSE (BEH)

(2) TIME SENSE (BFH)

: The VCR returns the currently set month, day and year as 6 bytes. Each byte has a value of 30H to

39H. 30H corresponds to 0 and 39H to 9.

(Example: For June. 14, 1998, the VCR returns 30H, 36H, 31H, 34H, 39H and 38H.)

: The VCR returns the currently set hour, minute and second as 6 bytes. Each byte has a value of

30H to 39H. 30H corresponds to 0 and 39H to 9.

(Example) June, 30, 1998

(Example: For 15:30:45, the VCR returns 31H, 35H, 33H, 30H, 34H and 35H.)

: VCR returns the counter data beginning with the 4th digit from the right in 4 bytes. ASCII codes

“30H – 39H” correspond with the numbers “0 – 9” (eg: 1234: 31H, 32H, 33H, 34H).

: VCR returns the last 4 characters of the SR-L910 model name in ASCII code.

L: 4CH, 9: 39H, 1: 31H, 0: 30H

TXD

RXD

8EH

30H

36H

33H

30H

39H

38H

Time

(3) COUNT CODE (D0H)

(4) DEVICE TYPE (D1H)

(5) VTR INQ (FBH)

0AH

Day

0AH

Year

0AH

: Used to make sure that the connected unit is the VCR. The VCR will return “ACK” (0AH).

Month

(6) PL/AL COUNT SENSE (D5H) : VCR will return a total of 6 bytes. The first 3 bytes show the number of alarm inputs in 3 digits and

the last 3 bytes show the number of power losses in 3 digits. ASCII codes “30H – 39H” correspond

with the numbers “0 – 9” (eg: 123 alarm inputs and 45 power losses: 31H, 32H, 33H, 30H, 34H,

35H).

(2) TIME SET (8FH)

: Set the current time (hour, minute, second) for the VCR.

After this command (8FH) is sent, input 1-byte numerical data (30H — 39H).

(7) HOUR METER SENSE (D2H) : VCR returns the hour meter data in 5 bytes. (eg: 12345 hours: 31H, 32H, 33H, 34H, 35H).

(8) TL STATUS SENSE (D6H)

: VCR returns Timelapse mode data in 6 bytes. The contents of each byte are as follows:

(Example) 15 hours, 29 minutes, 59 seconds

TXD

RXD

8FH

31H

35H

32H

39H

35H

39H

Time

1st/2nd byte

Recording/playback mode

0AH

Correspondence of the code and the mode is the same as that described in “2-2 Recording/playback mode setting commands

(2) MODE (7EH)”.

Hour

Minute

Second

3rd byte

5th byte

Conditions of each setting

Settings status

BIT

Status when BIT is “1”.

Not difined. Always 0.

Power is ON.

Auto REC mode is ON.

Auto rewind mode is ON.

Operation lock is ON.*

Series recording is ON.

Tape end buzzer is ON.

Alarm buzzer is ON.

BIT

Status when BIT is “1”.

REMOTE is ON.

SUMMER TIME is ON.

INDEX SKIP.

TIMER ALARM OFF.

NOISELESS PLAY ON.

B/W mode (forced Black and White mode) ON

CAM SW WIDTH 20msec.

Always 0.

5 Timer programming commands

(1) PRG/CLK (62H)

(2) SHIFT → (–) (64H)

SHIFT ← (+) (63H)

(3) SET – (66H)

SET + (65H)

: Engagestimer programming mode.

: Selects setting items. (–)

: Selects setting items. (+)

: Sets data selected with SHIFT.

: Cancels program data in timer programming or engages the Cancel Program mode.

(4) CANCEL (67H)

Setting procedure is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a time with “ACK” (0AH)

confirmation from the VCR after each transmission.

4th byte

Conditions of each setting

6th byte

Types of warnings

BIT

Status when BIT is “1”.

HEX.Data Types of warnings

5 On-screen setting command

Alarm recording is in progress.

ALARM REC function is ON.

Not defined. Always 0.

Sensor recording is ON.

External recording function is ON.

Always 0.

No abnormality

Loading error

Unloading error

Supply reel error

Drum error

Take-up reel error

Capstan error

Cassette eject error

Not defined.

(1) ON SCREEN ON (70H)

ON SCREEN OFF (71H)

: Activates time/date on-screen indication.

: Deactivates on-screen indication.

Setting procedure for the following command (2) is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a

time with “ACK” (0AH) confirmation from the VCR after each transmission.

(2) ON SCREEN SELECT (74H)

Index search mode is ON.

Warning buzzer is ON.

: Changes the time display position on screen.

5 Other commands

Recording check error

Battery backup error

Input signal error

(1) AL/PL RESET (E1H)

: When transmitted during alarm recording, the recording mode switches back to the previous mode.

The VCR’s “AL” indication goes off. Transmit again after “AL” indicator goes off to reset the alarm/

power loss memory.

Operation with commands from the RS-232C is accepted

even in the Operation Lock mode.

(2) COUNT RESET (E2H)

: Resets the tape counter to “0000”.

Download from Www.Somanuals.com. All Manuals Search And Download.

10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD

2-4 Others (Input data correction/Error cancellation)

(9) STATUS SENSE (D7H)

: The VCR will return current status information in 5 bytes.

These are return codes from the SR-L910E/EK. (Error-related codes only)

1st byte

(1) ERROR (02H)

: This is returned when commands of more than 1 byte are transmitted to the VCR and an illegal command is

received in the 2nd byte (or later) of the transmitted command.

In this status, no command can be accepted and only STATUS SENSE will be returned.

To restore normal operation, transmit CLEAR ERROR (41H) or CLEAR (56H) to the VCR.

BIT

Status when BIT is “1”.

Error

Indicates that an illegal command has been received. No further commands will be accepted.

To restore to normal operation, transmit CLEAR ERROR (41H) to the VCR.

Always 0.

The tape has not been loaded.

A tape with no safety tab has been loaded. In this case, no recording commands

Not defined

Cassette out

REC inhibit

CLEAR ERROR (41H) : Used to cancel previously-transmitted 1-byte numeric data when inputting

numeric data such as an Index search point. Also used to cancel error status.

will be accepted.

Always 0.

CLEAR (56H)

: Clears the whole command. Cancels the current status and stops the VCR. Also

cancels the error status.

Not defined

Always 1.

Eg : After setting the recording/playback mode to “L24H”, 32H is mistakenly transmitted . Cancel 32H with

“41H” and input “33H” instead.

2nd byte

BIT

Status when BIT is “1”.

Tape end sensor is detected.

Tape begin sensor is detected.

Always 0.

TXD

RXD

7EH

30H

32H

41H

33H

40H

Time

Tape End

0AH

Tape Begin

Not defined

Warning

Not defined

A EE Mode

V EE Mode

VCR malfunction.*

(2) NAK (0BH)

: VCR will return this code when non-defined or non-functional command is received in the 1st byte of the

transmitted command. In this case, it is not necessary to input CLEAR. Check whether the transmitted command

is acceptable to the VCR or not.

Always 0.

An externally-input audio signal is being output.

An externally-input video signal is being output.

3rd byte

3 Commands reference chart

BIT

Status when BIT is “1”.

Always 0.

Search is in progress. (VISS)

Repeat recording/playback is in progress.

Always 0.

VCR’s REPEAT REC switch is set to ON.

Always 0.

VCR’s TIMER button is set to ON.

Always 0.

Not defined

VCR setting commands

VCR control commands

Search Mode

Repeat Mode

Not defined

Repeat

Not defined

Timer REC ON

Not defined

Page

5 Recording/playback mode

MODE SHIFT

MODE

OPERATE ON/OFF

PLAY/REV PLAY

STOP

FF/REW

5 Timelapse VCR operation mode

TL STATUS

5 Date and time setting

DATE SET

TIMER ON/OFF

OPE ON/OFF

EJECT

F-FIELD STEP

REC CHECK

4th byte

BIT

Status when BIT is “1”.

Always 0.

VCR is in the Record mode.

A cassette is being ejected.

Always 1.

VCR is in the Stop mode.

VCR is in the Rewind mode.

VCR is in the Fast-Forward mode.

VCR is in the Play mode.

Not defined

REC Mode

Eject

Not defined

Stop Mode

REW Mode

FF Mode

TIME SET

5 Timer programming

PRG

SHIFT –/+

SET –/+

REC/REC PAUSE

VISS FWD/REV

VISS SEARCH

CANCEL

Play Mode

5 On-screen setting

ON SCREEN ON/OFF

ON SCREEN SELECT

5 Others

AL/PL RESET

COUNT RESET

5th byte

BIT

Status when BIT is “1”.

Speed Code 0

VCR’s current tape running mode. See below.

Reverse search is in progress.

Forward search is in progress.

Always 0.

Speed Code 1

Speed Code 2

Speed Code 3

Shuttle REV

Shuttle FWD

Not defined

Commands for VCR status verification

Return codes from VCR

Page

Byte returned

from VCR

Page

Pause Mode

VCR is in the Pause mode.

ACK

NAK

ERROR

CASSETTE OUT

COMPLETION

NOT TARGET

ALARM INPUT

Contents of 5th byte BIT 0/1/2/3 “Speed Code”

COUNT CODE

DEVICE TYPE

VTR INQ

PL/AL COUNT SENSE

HOUR METER SENSE

TL STATUS SENSE

4 bytes

1 byte

6 bytes

5 bytes

6 bytes

Speed Code

BIT

Still

Timelapse playback

Timelapse recording/1X playback

9X search

STATUS SENSE

DATA SENSE

TIME SENSE

5 bytes

6 bytes

Others

When an error occurs in the VCR and the Warning mode is engaged, the third bit of the second byte sent back with the STATUS

SENSE (D7H) is set to “1”, showing the warning status.

In this case, release the warning via the RS-232C with the CLEAR (56H). To release it on the VCR, turn the [OPERATE] button

off and on again.

Page

JVC TABLE 1 ON/OFF

(10) ALARM INPUT (06H)

: SR-L910E/EK return code

This is returned when an alarm signal is input during recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

11 APPENDIXES

11-1 Rear Panel’s Input/Output

11-2 Specifications

5 Recording system Luminance: FM recording

Colour: down-converted direct

recording

[Time/date]

5 Display

[CAM SW OUT] camera switching signal output

Day, month, year, hours, minutes,

seconds, recording mode

Variable (four coners)

16H

Approx. five years (may be less

depending on the operating

environment)

The CAM SW OUT terminal outputs a camera switching timing signal to the connected sequential switcher. The switching interval

can be set with the <CAM SW> on the VTR mode 1 setting screen. The camera switching signal is output at ground level.

5 Signal system

PAL-type colour signal, CCIR

monochrome signal, 625 lines/

5 Display position

5 Character size

5 Power backup

50 fields

Camera

5 Tape speed

23.39 mm/sec.,

switching

signal output

timing

During recording

During standby

Timelapse recording

VHS Standard mode (SP)

3 hours (VHS Standard (SP) mode)

12, 24 hours

1 field

5 Recording and

playback time

[Alarm]

5 Alarm input

5 Camera switching

output

(Timelapse mode: field recording)

(with E-180 cassette)

Input at ground level

Negative pulse output (5 msec.)

Open-collector output

Camera switching signal

(open-collector output)

With the <CAM SW>

function menu switch

set to "1 FIELD"

Time

GND

5 msec/20 msec

(L12H/L24H)

5 Fast-forward/

Approx. 4 minutes

rewind time

(with E-180 cassette)

5 Power supply

AC 220 – 240 V, 50/60 Hz

5 Power

19 watts

consumption

5 Dimensions

5 Weight

360 (W) x 94 (H) x 294 (D) mm

Approx. 4.5 kg

Other input/output terminal signal levels

5 Operating

temperature

5°C — 40°C

Outer dimensions

Terminals

ALARM IN

Signal levels

Remarks

5 Operating humidity 30%RH or more, 80%RH or less

5 Storage

–20°C — 60°C

Input at ground level

temperature

Alarm signal input

LV: 0 V

[Video System]

Min. 400 ms

5 Signal input

0.5 — 2.0 Vp-p, 75 ohms,

unbalanced BNC

Signal output 1.0 Vp-p, 75 ohms,

unbalanced BNC

Colour mode: 240 lines or more

(SP mode)

ALARM RST IN

Alarm signal reset

input

HV: 5 V ~ 12 V

Input at high level

5 Signal output

5 Horizontal

resolution

Min. 400 ms

B & W mode : 280 lines or more

(SP mode)

43 dB or more (SP mode)

ALARM REC OUT

Alarm recording

mode signal output

Output at high level

Output at ground level

Output at high level

HV:12 V

(output impedance: 4.7 kohms)

360

5 Video S/N

Alarm

Record mode

[Audio system]

5 Number of tracks

5 Line input

5 Mic input

5 Line output

5 Frequency

response

5 Audio S/N

Record mode:

repeat recording OFF/auto rewind OFF

TAPE END OUT

Tape end signal

output

1 (normal)

repeat recording ON/auto rewind ON

–8 dBs, 50 kohms, unbalanced RCA

–67 dBs, 600 ohms, unbalanced

–8 dBs, 1 kohm, unbalanced RCA

100 Hz — 10 kHz (SP mode)

LV: 0 V

Unit: mm

Max. 10 mA

Manual

About 2

Tape end

operation

seconds

WARNING/REC

OUT

Warning signal/Rec

HV: 12 V

(output impedance: 4.7 kohms)

40 dB or more (SP mode at 4%

distortion level)

0.20% WRMS or less (SP mode)

Warning

Warning reset

* Design and specifications subject to change without

notice.

mode signal output

5 Wow and flutter

CLOCK RESET IN

Clock reset input

Input at ground level

Output at ground level

LV: 0 V

Min. 150 ms

CLOCK RESET

OUT

Clock reset output

LV: 0 V

About 150 ms

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Oven BIM 31 KA B IX GB User Manual
Ingersoll Rand Marine Sanitation System PD20X XXX XXX B User Manual
Ingersoll Rand Water Pump PH10A X X User Manual
Insignia Portable Stereo System NS B3111 User Manual
Interphase Tech Fish Finder DC 1000 User Manual
JBL Portable Speaker Two Piece Speaker System User Manual
Kawasaki Motorcycle Concours 14 User Manual
Kenwood Video Gaming Accessories PS 50 User Manual
Keys Fitness Fitness Equipment KF AC User Manual
Kompernass Blender KH 525 User Manual