JVC VCR LPT0701 001A User Manual

VIDEO CASSETTE RECORDER  
HR-J4009UM  
INSTRUCTIONS  
Printed in Thailand  
LPT0701-001A  
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.  
K
4F11501A  
02/01  
UM  
Dear Customer,  
CAUTION  
Thank you for purchasing the JVC VHS video cassette recorder.  
Before use, please read the safety information and precautions to  
ensure safe use of your new VCR.  
When you are not using the VCR for a long period of time, it is  
recommended that you disconnect the power cord from the  
AC outlet.  
Dangerous voltage inside. Refer internal servicing to qualified  
service personnel. To prevent electric shock or fire hazard,  
remove the power cord from the AC outlet prior to  
connecting or disconnecting any signal lead or aerial.  
Changes or modifications not approved by JVC could void  
user’s authority to operate the equipment.  
CAUTIONS  
WARNING: DANGEROUS VOLTAGE INSIDE  
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO  
NOT EXPOSE THIS UNIT TO RAIN OR  
MOISTURE.  
The POWER  
power from the unit, but switches operating current on and off.  
” shows electrical power standby and “ l ” shows ON.  
/l button does not completely shut off mains  
• Cassettes marked “VHS” (or “S-VHS”) can be used with this video  
cassette recorder. However, S-VHS recording is not possible with  
this model.  
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)  
that makes it possible to play back S-VHS recordings with  
regular VHS resolution.  
This unit is produced to comply with Standard IEC 60065.  
• HQ VHS is compatible with existing VHS equipment.  
POWER SYSTEM:  
This set operates on voltage of AC 110 – 220V~, 50/60 Hz with  
automatic switching.  
Use the conversion plug (provided) depending on the type of  
your AC WALL outlet.  
The rating plate and safety caution are on the rear of the unit.  
IMPORTANT:  
It may be unlawful to record or play back copyrighted material  
without the consent of the copyright owner.  
4F11501AE Cov-07  
1
16/01/2002, 18:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons, Connectors and Indicators  
Front Panel  
STOP/EJECT  
REC  
PLAY  
POWER  
Cassette loading slot  
CH–/+  
PLAY  
POWER  
REW  
FF  
STOP/EJECT  
CH  
AUDIO  
VIDEO  
TV/VCR  
TIMER  
REC  
POWER  
REC  
TV/VCR indicator  
Remote sensor  
REW  
FF  
VIDEO/AUDIO input  
connectors  
TIMER indicator  
POWER indicator  
REC indicator  
Rear Panel  
AC power cord  
UHF/VHF IN (ANT)  
UHF/VHF  
IN(ANT)  
OUT  
VIDEO  
OUT(TV)  
AUDIO  
CH  
4
3
AUDIO/VIDEO OUT  
3/4 CHANNEL  
SELECTTOR SWITCH  
UHF/VHF OUT (TV)  
4F11501AE Cov-07  
3
16/01/2002, 18:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– Buttons, Connectors and Indicators –  
Remote  
Connections and VCR channel  
Setting  
POWER  
POWER  
Check contents  
1
1
4
7
2
5
8
3
6
9
Make sure the package contains all of the accessories listed  
Number keys  
in Specifications.  
CH/+  
Situate VCR  
2
AUX  
REC  
Place the VCR on a stable, horizontal surface.  
+
0(AUX)  
CH  
PAUSE  
PLAY  
Connect VCR to TV  
3
REC  
PAUSE  
PLAY  
Antenna or cable  
REW  
Coaxial cable  
REW  
FF  
FF  
STOP  
ENTER  
TIMER  
CANCEL  
C.RESET  
Flat feeder  
MENU  
ENTER  
STOP  
SET  
MENU  
+
Matching transformer  
(not supplied)  
CANCEL  
SET/+  
TV/VCR  
TIMER  
SP/EP  
C.RESET  
DISPLAY  
+
SP/EP  
TV/VCR  
UHF/VHF  
IN(ANT)  
TV POWER  
INPUT  
TV CH  
DISPLAY  
AC power cord  
OUT  
TV POWER  
INPUT  
+
TV VOL  
VIDEO  
TV CH/+  
OUT(TV)  
AUDIO  
CH  
4
TV VOL/+  
3
V)  
AU
R
This Remote transmit A code  
signals only; it is not applicable  
to B code signals.  
Back of VCR  
AC outlet  
On-screen display  
To audio/video input connectors  
If you press DISPLAY on the Remote, you can see the current VCR  
status on the TV screen. Press DISPLAY again to exit on-screen  
display.  
Audio/video cable  
(not supplied)  
The indications are not recorded even if the VCR is in the recording  
mode.  
RF cable  
(supplied)  
TV  
To 75 terminal  
WHILE WATCHING TV  
RF Connection  
1
2
Disconnect the TV antenna from the TV.  
Connect the TV antenna cable to the UHF/VHF IN  
terminal on the rear of the VCR.  
Connect the supplied RF cable between the UHF/VHF  
OUT terminal on the rear of the VCR and the TVs  
antenna input terminal.  
DAY AND CLOCK TIME  
8 : 30 AM THU  
CH 125  
CHANNEL  
3
TAPE  
00 : 00 : 00 SP  
SPEED  
REAL TIME COUNTER  
AV Connection  
(improves picture quality during tape playback.)  
If your TV is equipped with audio/video input connectors  
WHILE OPERATING A TAPE  
OPERATING MODE  
1
Connect the antenna, VCR and TV as shown in the  
illustration.  
8 : 30 AM THU  
AUTO TR.  
CH 125  
2
Connect an audio/video cable between the AUDIO/  
VIDEO OUT connectors on the rear of the VCR and the  
audio/video input connectors on the TV.  
AUTO REPEAT  
TAPE IN  
AUTO TRACKING  
Even if you are using audio/video cables to connect your  
VCR to your TV, you must also connect it using the RF  
cable. This will ensure that you can record one show while  
watching another.  
00 : 00 : 00 SP  
4F11501AE Cov-07  
4
16/01/2002, 18:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and VCR channel Setting –  
Initial Settings  
4
Set VCR channel  
To view playback of a recorded tape, or to watch a program  
selected by the VCR's channel selector, the TV must be set to  
channel 3 or 4 (video channel) when a TV is connected with  
the 75 ohm coaxial cable only.  
Language Setting  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
The default setting is ESPAÑOL.  
ON OFF  
Access Menu screen, then  
Language screen  
1
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
1
Set the 3/4 Channel selector switch (Rear of the VCR) to  
CH 3 or 4.  
Turn ON the TV and set to CH 3 or 4 to correspond with  
the channel selected in 1.  
+//ENTER/MENU⟩  
Press MENU on the Remote. Press  
SET /+ to select LANGUAGE, then  
press ENTER.  
2
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
3
4
Press POWER to turn on the VCR.  
The POWER indicator will light.  
2
Select language  
ESPAÑOL  
This VCR offers you the language  
choice to view menus and some  
messages in English, Spanish or  
FRANCAIS  
Press TV/VCR to select the VCR  
position.  
The TV/VCR indicator will light.  
+ – ⟩  
/ /ENTER/MENU  
CAN 125  
French. Press SET /+ to select your desired language, then  
press ENTER.  
Press MENU twice to return to normal screen.  
5
Select any channel to receive a  
TV station in your area.  
The channel number will appear  
on the screen for about 4 seconds.  
Clock Setting  
Preparations  
You must set the date and time for timer recording.  
MENU  
CLOCK SET  
Access Menu screen, then Clock  
Set screen  
Press MENU on the Remote. Press  
SET /+ to select CLOCK SET, then  
press ENTER.  
1
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
ON OFF  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
+/—/ENTER/MENU⟩  
Set month, day, year and time  
2
MONTH  
DAY  
3
1
(WED)  
Press SET /+ until the desired month  
appears, then press ENTER. Set the  
day, year and time in the same way.  
YEAR  
TIME  
2000  
12  
:
00 AM  
+
/
/ENTER/CANCEL/MENU  
3 Start clock  
Press MENU twice and normal screen  
appears.  
MONTH  
3
DAY  
26 (TUE)  
YEAR  
TIME  
2002  
8
:
30 AM  
+
/
/ENTER/CANCEL/MENU  
To make corrections any time during the process  
Press CANCEL repeatedly until the item you want to change  
blinks, then press SET /+.  
NOTE:  
After a power failure or disconnection of the power over 18  
hours, the timer settings will be lost. In this case, reset the  
present time.  
4F11501AE Cov-07  
5
16/01/2002, 18:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings –  
Tuner Setting  
Setting channels manually  
Manual Channel Set  
This VCR is equipped with a channel memory feature which  
allows channels to skip up or down to the next channel set  
into memory, skipping over unwanted channels. Before  
selecting channels, they must be programmed into the VCRs  
memory. In addition to normal VHF and UHF channels, this  
VCR can receive up to 113 Cable TV channels. To use this  
VCR with an antenna, set the TV/CATV menu option to the  
TV mode. When shipped from the factory, this menu option  
is in the CATV mode.  
You can add the channels you want or delete the channels  
you do not want manually.  
Access Menu screen, then CH  
Set Up screen  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT ON OFF  
CH SET UP  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
1
Press MENU on the Remote. Press  
SET /+ to select CH SET UP, then  
press ENTER.  
+//ENTER/MENU⟩  
TV/CATV Selection  
CH SET UP  
Access ADD/DELETE Mode  
2
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
Access Menu screen, then CH  
Set Up screen  
Press SET /+ to select ADD/  
DELETE, then press ENTER.  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
1
ON OFF  
Press MENU on the Remote. Press  
SET /+ to select CH SET UP, then  
press ENTER.  
+ ⟩  
/ /ENTER/MENU  
+//ENTER/MENU⟩  
Add or Delete desired channels  
3
ADD  
CH 012  
Perform TV/CATV Selection  
CH SET UP  
2
1
Press SET /+ on the Remote to  
select a channel number you  
want to add or delete.  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
Press SET /+ to select TV/CATV,  
then press ENTER to select the TV  
or CATV mode. The arrow indicates  
the selected mode.  
+ ⟩  
/ /ENTER/MENU  
2
To add channels  
+ ⟩  
/ /ENTER/MENU  
Press ENTER until ADDappears on the screen to set to  
add the unmemorized channel.  
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
To delete channels  
Press ENTER until DELETEappears on the screen to set  
to delete the channel from memory.  
Press MENU twice to return to normal screen.  
Repeat to to add or delete other channel.  
1
2
Setting channels automatically  
3
Press MENU three times to return to normal screen.  
Auto Channel Memory  
The VCR can receive a maximum of  
181 channels by presetting the  
channels into memory.  
NOTE: You cant select CH SET UPif you set the channel  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
to L.  
ON OFF  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
Access Menu screen, then CH  
1
Set Up screen  
+//ENTER/MENU⟩  
Press MENU on the Remote. Press  
SET /+ to select CH SET UP, then  
press ENTER.  
CH SET UP  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
2
Perform Auto Channel Memory  
Press SET /+ to select AUTO CH  
MEMORY, then press ENTER.  
+ ⟩  
/ /ENTER/MENU  
3
Complete Auto Channel Memory  
The auto tuning will start. The  
channel display will count up and  
when finished, the screen returns to  
normal.  
CH 001  
4F11501AE Cov-07  
6
16/01/2002, 18:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Slow-motion  
Press PLAY ( ) on the  
Remote.  
Playback will proceed at  
1/10 th of the normal speed.  
Press PLAY ( ) to resume  
normal playback.  
OR Press Play ( ) on the  
Basic Playback  
VCR.  
Load a cassette  
1
PLAY  
NOTE:  
POWER  
REW  
FF  
STOP/EJECT  
CH  
During slow motion picture, some noise might appear on  
the TV screen. Use the SET/+ on the Remote to eliminate  
the noise.  
VIDEO  
AUDIO  
TV/VCR  
TIMER  
REC  
POWER  
REC  
Speed search  
Make sure the window side is up, the rear  
label side is facing you and the arrow on  
the front of the cassette is pointing  
towards the VCR.  
Press REW (  
) or FF  
OR Press REW (  
) or  
(
) on the Remote.  
FF ( ) on the VCR.  
Press PLAY ( ) to resume  
Do not apply too much pressure when  
inserting.  
normal playback.  
The VCR turns on, and the counter on  
the on-screen display is reset, automatically.  
Variable speed search  
If the cassettes record safety tab has been removed, playback  
Press REW (  
) or FF  
OR Press REW (  
) or FF  
begins automatically.  
(
) repeatedly on the  
(
) repeatedly on  
Start playback  
2
Remote.  
the VCR.  
Press PLAY (  
).  
Press PLAY ( ) to resume  
normal playback.  
Each time you press REW  
(
) or FF (  
) the  
playback speed changes.  
During playback  
Stop playback  
TAPE SPEED  
PICTURE SEARCH SPEED  
PRESS ONCE  
PRESS TWICE  
5X  
15X  
OR Press STOP/EJECT (/  
on the VCR.  
SP  
EP  
3X  
9X  
Press STOP ( ) on the  
Remote.  
)
When the tape is not running  
Rewind/fast-forward  
OR Press REW (  
) or FF  
Press REW (  
) or FF  
(
) on the VCR.  
(
) on the Remote.  
Pause playback and view still picture  
Press PAUSE.  
Press PLAY ( ) to resume  
normal playback.  
Pause and Frame-by-Frame playback  
Eject the tape  
Press PAUSE to pause, then  
Press STOP/EJECT (/ ) on  
the VCR.  
You can also eject the  
cassette when the VCR is  
turned off.  
press PAUSE repeatedly.  
Press PLAY ( ) to resume  
normal playback.  
Turn off the VCR  
Press POWER on the  
Remote.  
OR Press POWER ( /l) on  
the VCR.  
4F11501AE Cov-07  
7
16/01/2002, 18:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– Playback –  
Playback Features  
Recording  
It may be unlawful to record or play back copyrighted  
material without the consent of the copyright owner.  
Accidental erasure prevention  
Adjusting tracking condition  
Tracking Adjustment  
Automatic tracking adjustment  
Whenever you insert a tape and start playback, automatic  
tracking starts working and continuously analyzes the signal  
to enable optimum picture quality during playback.  
Manual tracking adjustment  
If automatic tracking cannot eliminate noises well during  
playback, press SET –/+ on the Remote to eliminate the  
noises. Press it briefly for a fine adjustment, or press and  
hold for a coarse adjustment.  
To prevent accidental recording on a recorded cassette,  
remove its record safety tab. To record on  
it later, cover the hole with adhesive  
tape.  
Record safety tab  
Basic Recording  
Load a cassette  
1
Make sure the record safety tab is  
intact. If not, cover the hole with  
adhesive tape before inserting the  
cassette.  
• Press SP/EP on the Remote to reactivate automatic  
tracking.  
• The VCR turns on, and the counter  
is reset, automatically.  
2 Select recording channel  
Press CH–/+ or the Number keys on  
the Remote [CH–/+ on the VCR].  
CH 001  
Playing back tape repeatedly  
– Auto Repeat Play  
• If you connect the TV and the VCR  
only using the RF connection, press  
TV/VCR on the Remote so that the  
TV/VCR indicator lights to view the program to be  
recorded.  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
Access Menu screen  
Press MENU on the Remote.  
Press SET –/+ to select “AUTO  
1
ON OFF  
REPEAT”.  
Set tape speed  
3
Press SP/EP.  
+/—/ENTER/MENU⟩  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
Select ON/OFF  
Press ENTER to select “ON” or  
“OFF”.  
Press MENU to return to normal  
screen.  
2
3
00 : 00 : 00 SP  
ON OFF  
4
Start recording  
CH 110  
On the VCR, press REC. Or on the  
+/—/ENTER/MENU⟩  
Remote, while holding REC, press  
PLAY ( ).  
Start Auto Repeat Play  
Press PLAY. The tape will play  
over and over until the repeat  
mode is canceled.  
The REC indicator will light.  
During recording  
Pause recording  
Press PAUSE.  
• Press PAUSE to resume recording.  
• You can select channel in the  
recording pause mode.  
Stop recording  
OR Press STOP/EJECT  
(/ ) on the VCR.  
Press STOP ( ) on the  
Remote.  
4F11501AE 08-Back  
8
16/01/2002, 18:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording –  
Recording Features  
Timer Recording  
Specifying recording length  
Timer recording can be programmed on-screen with  
the remote control. The built-in timer allows automatic  
unattended recording of up to 8 programs within 1  
month.  
- One Touch Timer Recording (OTR)  
The One-touch Timer Recording feature provides a  
simple and convenient way to make a timed  
recording.  
NOTES:  
EXAMPLE: One-touch Timer Recording for 30 minutes.  
After timer recording is completed, the VCR turns off  
automatically.  
When a TV is connected with an audio/video cable, turn the  
TV on and select the video input mode on the TV.  
You can program the timer recording while a regular  
recording is in progress; the menu screens will not be  
recorded.  
The timer recording will start at 20 seconds before the  
time you predetermined.  
Load a cassette tape with the  
erase prevention tab intact.  
1
EXAMPLE: Program a timer recording for the 26th day,  
channel 125 (CATV), 11:00 - 11:30 PM on timer program  
number 1 (Tape speed: EP).  
Press SP/EP to select the desired  
tape speed SP or EP.  
The counter and SP or EP will  
appear on the screen for about 4  
seconds.  
2
3
4
When a TV is connected with an audio/video cable, turn the  
TV and this VCR on and select the video input mode on the  
TV.  
00 : 00 : 00 SP  
CH 125  
MENU  
CLOCK SET  
TIMER REC SET  
AUTO REPEAT  
CH SET UP  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
Press MENU on the Remote.  
Check the TIMER REC SET”  
option is selected, then press  
ENTER.  
1
Press the Number keys or CH /+  
to select the channel to be  
recorded.  
The channel number will appear  
on the screen and display for  
about 4 seconds.  
ON OFF  
+/—/ENTER/MENU⟩  
Press SET /+ to select one  
of the program lines, then  
press ENTER.  
2
DATE START  
END  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
CH  
– –  
– –  
– –  
– –  
– –  
– –  
– –  
– –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
OTR 0 : 30  
CH 125  
Press REC on the VCR or while  
Press SET /+ to select the  
date, then press ENTER.  
3
4
holding REC, press PLAY ( ) on  
the Remote to begin recording.  
Press REC on the VCR again to  
stop recording after 30 minutes.  
Each additional press of REC will  
increase recording time as shown  
in the chart below, up to a  
maximum of 5 hours. The OTR  
and recording time will appear on  
screen for about 4 seconds.  
+ –  
/
/ENTER/CANCEL/MENU  
Set the start time, end time,  
channel and tape speed as in  
step 3.  
DATE  
START END  
CH  
---  
26(SU)  
-
-:-- -:--  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
------ -:-- -:-- ---  
-
-
-
-
-
-
-
NOTE: To record from external  
source, press SET /+  
and set the channel to  
"L". "L" will appear  
+
/–/ENTER/CANCEL/MENU  
next to CH 125 (or 69).  
NOTES: Press REC to increase  
the time needed for  
recording (See the  
Press Recording time  
once  
twice  
NORMAL REC  
To enter other programs,  
repeat step 2 through 4. Or,  
press MENU twice to return  
to the normal screen.  
5
6
0:30  
chart ).  
To cancel OTR, press  
STOP ( ) or turn off  
the power.  
3 times  
4 times  
5 times  
6 times  
7 times  
8 times  
1:00  
1:30  
2:00  
3:00  
4:00  
5:00  
Press TIMER on the Remote.  
The power will go off, the  
TIMER indicator will light and  
the VCR stands by for  
recording.  
9 times NORMAL REC  
Watching one program while recording another  
During recording…  
If you connect the TV and the VCR only using the RF  
connection to view pictures from the VCR, press TV/VCR  
on the Remote so that TV/VCR indicator goes off. (The TV  
broadcast being recorded disappears.)  
To use the VCR while it is in timer recording standby mode  
Press TIMER. After you use the VCR, press TIMER again  
to put the VCR into timer recording standby mode.  
If you are using the AV connection to view pictures from  
the VCR, change the TVs input mode from AV to TV.  
Then, select the channel you want to watch, on the TV.  
4F11501AE 08-Back  
9
16/01/2002, 18:26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recordings –  
IF THE PROGRAM OVERLAPS ANOTHER  
TO CORRECT THE SETTINGS  
When setting the Timer Recording, press ENTER until the  
desired setting blinks, then re-enter the setting using SET /+.  
When finished, press ENTER.  
NOTE: Do not overlap programs as portions of the  
conflicting programs will be lost. The first  
recording time has priority over the next recording  
time as shown in the diagram.  
NOTES: The VCR cannot be used while the TIMER  
indicator is lit.  
8 : 00  
9 : 00  
10 : 00  
11 : 00  
After a power failure or disconnection of the  
power plug over 18 hours, all programmed  
recording settings must be reset upon  
resumption of power. In this case, reset the clock  
and reprogram any timer recordings.  
Press CANCEL to move cursor backward for  
correction.  
Program 1  
Program 2  
Deleted Parts  
Program 3  
Non Recorded Portion Parts  
Recording  
Control Settings  
Prog.1  
Prog.2  
Prog.3  
NOTES: The everyday/every week recording can be made  
continuously until the recording is canceled or  
the tape reaches the end.  
TO SET DAILY/WEEKLY TIMER  
When setting the date in step 3 in the Setting the Timer  
Recording section on the previous page, press SET –  
repeatedly.  
During timer recording, the automatic rewinding  
mechanism does not function.  
The setting changes as follows:  
Example  
The current day (Friday)  
SU-SA (Sunday to Saturday)  
MO-SA (Monday to Saturday)  
MO-FR (Monday to Friday)  
WKL-TH (Weekly Thursday)  
One month later  
minus one day  
WKL-WE  
(Weekly Wednesday)  
TO CONFIRM THE SETTINGS  
Press SET /+ to select the  
DATE START  
END  
CH  
(
)
26 WE 11:00PM 11:30PM 125 EP  
TIMER REC SEToption in the  
– – – – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– –  
– –  
– –  
– –  
– –  
– –  
– –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
MENU. Then press ENTER to  
display the timer program list.  
Press MENU twice to return to  
the normal screen.  
+ –  
/
/ENTER/CANCEL/MENU  
TO CANCEL A PROGRAM  
Press the SET /+ to select the  
TIMER REC SEToption in the  
MENU. Then press SET /+ to  
select the unnecessary program,  
and press CANCEL to cancel the  
program.  
DATE START  
END  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
CH  
– –  
– –  
– –  
– –  
– –  
– –  
– –  
– –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– – – – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
– : – –  
+ –  
/
/ENTER/CANCEL/MENU  
4F11501AE 08-Back  
10  
16/01/2002, 18:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Other Functions  
You can use your VCR as the playback or recording VCR.  
You can use a camcorder as the playback VCR and your VCR  
as the recording VCR. Refer also to the other components’  
instruction manuals for connection and its operations.  
BLUE BACK ON/OFF  
When this function is set to ON, the TV screen becomes all  
blue in the following cases:  
When receiving a channel not in use.  
When stopping playback.  
1
Make connections  
1
Press MENU on the remote. Press SET /+ to select  
NO NOISE BACKGROUND.  
Example: When using this VCR as the playback VCR  
2 Press ENTER to select ON.  
Press MENU to return to normal screen.  
3
This VCR (for playback)  
JVC TV Remote Control  
To AUDIO/VIDEO OUT  
This Remote can control some functions (TV POWER,  
INPUT, TV CH /+ and TV VOL /+) of a remote  
controllable JVC TV without setting.  
NOTE:  
Audio/video cable  
(not supplied)  
Its not possible to operate a unit not equipped with a  
remote sensor.  
This Remote can control a JVC TV only.  
To audio/video input  
Another VCR (for recording)  
When using this VCR as the recording VCR, connect this  
VCRs audio/video input connectors to the audio/video  
output connectors on the other VCR. If the playback VCR  
is monaural, connect the audio output connector on the  
playback VCR to the left audio input connector on this  
VCR.  
2 Load cassettes  
Insert the playback cassette into the playback VCR and the  
cassette to be recorded on into the recording VCR.  
3
Select input mode on recording VCR  
Select the correct external input on the recording VCR.  
On this VCR (when using this VCR as the recording VCR);  
Select L” — when connecting the other VCR to the audio/video  
input connectors on the front panel.  
Press O (AUX) or CH/+ on the Remote [CH/+ on the VCR].  
4
Start playback  
Press PLAY ( ) on the playback VCR.  
5
Start recording  
Press REC on the recording VCR.  
4F11501AE 08-Back  
11  
16/01/2002, 18:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Requesting Service  
Make sure by first checking the following points.  
SYMPTOM  
POWER  
CAUSE  
POSSIBLE SOLUTION  
Connect the AC power cord to the AC  
outlet.  
Insert a video cassette.  
The AC power cord is not connected.  
Cassette is not inserted.  
No power.  
Although the power is on, it  
does not operate.  
TV BROADCAST RECEPTION  
Antenna connection is not correct.  
Antenna cable is disconnected.  
The video channel is not in the correct  
position.  
Connect it correctly.  
Reconnect the antenna cable.  
Set it to CH 3 or 4.  
A TV program that is selected by  
the VCR does not appear on the  
screen.  
The TV is not set to the video channel  
3 or 4.  
Set the TV channel selector to the 3 or 4  
position.  
The TV/VCR selector is set at TV mode  
(The TV/VCR indicator is not lit).  
Press the TV/VCR selector button (The TV/  
VCR indicator will light).  
INPUT is set to the LINE mode.  
Press the Number key or CH /+ button to  
select your desired TV program.  
RECORDING  
Place a piece of vinyl tape over the gap.  
The erase prevention tab of the video  
cassette is broken off.  
TV recording does not work.  
Press the Number key or CH /+ button to  
select your desired TV program.  
INPUT is set to the LINE mode.  
Reset the present time.  
The time is not set correctly.  
The recording start/end time is not set  
correctly.  
Set the start/end time.  
Timer recording does not work.  
The TIMER button has not been  
pressed (The TIMER indicator is not lit).  
Press the TIMER button (The TIMER  
indicator is lit).  
PLAYBACK  
No picture on screen when  
playing back a recorded tape.  
The TV is not set to the video channel 3  
or 4.  
Set to the video channel 3 or 4 or  
adjust the fine tuning button on your  
TV set.  
Tracking adjustment beyond range of  
automatic tracking circuit.  
Adjust tracking manually using the SET or  
+ buttons on the remote control.  
Noise bars on screen.  
Video heads are dirty.  
The tape is worn or damaged.  
Have the video heads cleaned.  
Try another tape.  
REMOTE CONTROL  
It is not aimed at the remote sensor.  
Aim it at the remote sensor.  
Distance too far or too much light in  
the room.  
Operate within 15 feet (5 meters) reduce  
the light in the room.  
There is an obstacle in the path of the  
beam.  
Clear the path of the beam.  
Remote control does not work.  
The batteries are weak.  
The +, polarity of the batteries are  
not inserted correctly.  
Replace the batteries.  
Insert correctly.  
TV programs cannot be seen  
using the TV selector.  
Set to TV, or turn off the VCR power  
button.  
The TV/VCR function is in the VCR  
mode.  
4F11501AE 08-Back  
12  
16/01/2002, 18:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
:
AC 110 V-220 V~, 50Hz/60 Hz  
Power requirement  
Power consumption  
Power on  
:
:
9 W  
2.0 W  
Power off  
Temperature  
Operating  
:
:
:
:
:
:
5°C to 40°C (41°F to 104°F)  
20°C to 60°C (4°F to140°F)  
Horizontal only  
360 mm x 95 mm x 224 mm  
3.2 kg  
VHS NTSC standard  
Storage  
Operating position  
Dimensions (W x H x D)  
Weight  
Format  
Maximum recording time  
SP  
:
:
210 min. with ST-210 video cassette  
630 min. with ST-210 video cassette  
EP  
VIDEO/AUDIO  
:
NTSC-type color signal and EIA monochrome signal, 525 lines/60 fields  
Signal system  
Recording/Playback  
system  
:
:
:
DA-4 (Double Azimuth) head helical scan system  
42 dB  
230 lines  
Signal-to-noise ratio  
Horizontal resolution  
Frequency range  
Normal audio  
:
:
100 Hz to 10,000 Hz  
RCA connectors (IN x 1, OUT x 1)  
Input/Output  
TUNER  
:
Frequency-synthesized tuner  
Tuning system  
Channel coverage  
VHF  
:
:
:
:
Channels 213  
Channels 1469  
UHF  
113 Channels  
CATV  
RF output  
Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms,  
unbalanced  
TIMER  
:
:
:
Quartz  
Clock reference  
1-month programmable timer/8 programs  
Approx. 18 hours  
Program capacity  
Memory backup for timer  
ACCESSORIES  
:
RF cable (F-type), Infrared remote control unit, AAAbattery x 2, Conversion plug  
Provided accessories  
Specifications shown are for SP mode unless specified otherwise.  
E. & O.E. Design and specifications subject to change without notice.  
4F11501AE 08-Back  
13  
16/01/2002, 18:27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia DVD Player NS 7PDVDD User Manual
JVC Speaker System CA UXV100 User Manual
Kambrook Fan KFA413 User Manual
Kenmore Washer 22 46262 User Manual
Kenwood Car Speaker KFC 1065 User Manual
Kenwood Car Stereo System DPX 5030 User Manual
Keys Fitness Elliptical Trainer ET4000 User Manual
KitchenAid Blender KHB1231 User Manual
KitchenAid Pasta Maker KPSA User Manual
KitchenAid Refrigerator W10417002A User Manual