DV VIDEO CASSETTE RECORDER
DV VIDEOKASSETTENREKORDER
ENREGISTREUR A CASSETTE DIGITAL VIDEO
DV VIDEOREGISTRATORE
UNIDAD GRABADORA DE VÍDEO DV
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
BR-DV6000E
MODE D’EMPLOI
ISTRUZIONI PER L’USO
MANUAL DE INSTRUCCIONES
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
REW
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to unsure the best
possible performance.
LLT0034-002B-H
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
POWER SYSTEM
Warning Notice
Connection to the mains supply
This unit operates on voltage of 220 V to
240 V AC, 50 Hz/60 Hz.
FOR YOUR SAFETY (Australia)
1. Insert this plug only into effectively earthed
three-pin power outlet.
2. If any doubt exists regarding the earthing,
consult a qualified electrician.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
3. Extension cord, if used, must be three-core
correctly wired.
IMPORTANT (In the United Kingdom)
Mains Supply (AC 230 V `)
WARNING – THIS APPARATUS
MUST BE EARTHED
CAUTION
To prevent electric shock, do not open the
cabinet. No user serviceable parts inside.
Refer servicing to qualified service personnel.
The wires in this mains lead are coloured in
accordance with the following code;
GREEN-and-YELLOW : EARTH
BLUE
BROWN
: NEUTRAL
: LIVE
Note:
The rating plate and the safety caution are on
the rear of the unit.
As the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows.
The OPERATE button does not completely
shut off mains power from the unit, but
switches operating current on and off.
The wire which is coloured GREEN-AND-
YELLOW must be connected to the terminal in
the plug which is marked with the letter E or by
the safety earth symbol or coloured GREEN
or GREEN-AND-YELLOW. The wire which is
colouredBLUEmustbeconnectedtotheterminal
which is marked with the letter N or which is
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal
which is marked with the letter L or coloured
RED.
WARNING
Itshouldbenotedthatitmaybeunlawfultore-
record pre-recorded tapes, records, or discs
without the consent of the owner of copyright
in the sound or video recording, broadcast, or
cableprogrammeandinanyliterary,dramatic,
musical or artistic work embodied therein.
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC cable. One is for continental Europe, etc. and the other
one is only for U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is not
suitable.
FOR CONTINENTAL EUROPE, ETC.
FOR U.K. ONLY
Not to be used in the U.K.
If the plug supplied is not suitable for your
socket outlet, it should be cut off and
appropriate one fitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-3
● RS-422A and JVC bus interface supported
RS-422A-compatible edit controller RM-G820 and JVC
bus-compatible edit controller RM-G800 can be used
for editing.
Thank you for purchasing our
DV Video Cassette Recorder
BR-DV6000.
● Optionally, the RS-232C interface can be used.
● Recording and playback of time codes
● Time code I/O terminal
Slave lock is allowed if BR-DV6000 is connected to an
external time code generator.
As this is a DV-format video cassette recorder,
● SYNC IN terminal
External synchronization signals can be input.
video cassettes with the
be used with it.
or
logo can
● Audio-dubbing function (after-recording)
If the sampling frequency is 32kHz, audio dubbing can
be performed into CH3 and CH4 (except during DV in-
put).
DVCAM cassettes can be recorded in the DV
format.
● In order to prevent crumpling due to tape
slack, do not perform important recording
within the first and last 2 – 3 minute-run of
the tape.
● Recorded video (sound) is meant for per-
sonal entertainment only and must not be
used for other purposes without the prior
consent of the copyright owner.
● Backup recording function
With the combined use of other DV machines, long-time
continuous recording is possible.
● Using the SERIAL REMOTE OUT terminal or DV ter-
minal, dubbing with other recorders is possible only
with playback operation by BR-DV6000. (Replication
function)
● Equipped with a 2.5-inch color LCD
● JVC shall not guarantee the quality of re-
cording and playback should BR-DV6000 fail
to function normally due to defects, either
of the unit itself or the video cassette tapes.
Images, status display and menu display can be viewed.
● Multi-cue up
Up to 5 points of the tape position can be registered
and cued up.
● Index/blank search function
It can search for positions where index signals are re-
corded and unrecorded parts.
MAIN FEATURES
● DV format
● Repeat play function
There are 3 types of repeat function.
(INDEX/ VIDEO END/ TAPE END)
High picture and sound quality by digital technology.
● Compatible mechanisms for standard/mini DV cas-
sette tapes
It records on and plays back DV cassette tapes of the
standard and mini size. (SP mode only)
Recording in the DV format can be performed on
DVCAM cassette tapes.
● Recording/playback with an external timer
● With the use of the network board SA-DV6000 (sold
separately), image and audio streaming data can be
recorded on a CF card, and with a LAN card, stream-
ing data can be transmitted to a PC.
● Tapes recorded in DVCAM format can be played
● With the XLR IN board SA-X61U or XLR OUT board
SA-X62U (sold separately), audio input/output via
the XLR terminal is possible.
back on the BR-DV6000, detection is automatic.
● Equipped with composite, component and Y/C in-
put & output terminals.
● Equipped with DV IN/OUT terminals. (IEEE1394)
It can exchange digital signals with IEEE1394-compat-
ible devices.
● Both NTSC and PAL signals supported
Playing back NTSC tapes or recording NTSC signals
from the DV input is possible on the BR-DV6000E.
Please select NTSC on PB/DV IN menu.
For analog signal input, only PAL is supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-4
Table of Contents
INTRODUCTION
PLAYBACK
Remarks of usage ......................................... 6
Regular maintenance .................................... 7
Cleaning tape ................................................ 8
Cassette tape ................................................ 8
Condensation ................................................ 9
NAMES AND FUNCTIONS OF PARTS
Front panel .................................................. 10
Rear panel................................................... 16
ON-SCREEN DISPLAY
Setting ......................................................... 48
Basic playback procedure ........................... 49
Special playback functions .......................... 50
Search function ........................................... 52
Repeat playback.......................................... 53
Multi cue-up................................................. 54
External timer playback ............................... 56
Dubbing with another machine using the
SERIAL REMOTE OUT/DV terminals ......... 57
TIME CODE
On-screen display ....................................... 20
Status display .............................................. 21
Status/Event display .................................... 23
Alarm display ............................................... 24
LCD display ................................................. 26
CONNECTION
Displaying the time code ............................. 58
Presetting the time code ............................. 59
Recording the time code ............................. 60
Playing back the time code ......................... 63
EDIT
Connecting video signals ............................ 28
Connecting audio signals ............................ 30
Connecting to editing system ...................... 32
Connecting with serial remote terminals ..... 34
Connecting the AC adapter ......................... 35
PREPARATION
Editing with an RS-422A/JVC bus edit
remote controller ......................................... 64
Using a non-linear editing system ............... 68
MENU SCREENS
Structure of the Menu screens .................... 69
Setting the menus ....................................... 70
Description of the Menu screens................. 72
RS-232C INTERFACE
Turning on/off the power.............................. 36
Operation method (main unit/remote
controller) and operation lock mode ............ 37
Loading/Ejecting cassette ........................... 38
Setting the LCD display ............................... 39
Setting/Displaying date and time ................. 40
RECORDING
Command tables ......................................... 84
RS-232C specifications ............................... 85
RS-232C commands ................................... 86
OTHERS
Warning display ........................................... 97
Troubleshooting ........................................... 99
Checking the hour meter ........................... 100
Optional devices ........................................ 101
Installing SA-K46U RS-232C interface
board ......................................................... 102
Specifications ............................................ 103
Setting ......................................................... 42
Recording procedure................................... 43
Audio dubbing ............................................. 44
Backup recording function ........................... 45
Recording with serial remote terminals ....... 46
External timer recording .............................. 47
Download from Www.Somanuals.com. All Manuals Search And Download.
E-5
INTRODUCTION
Remarks of usage
Ⅵ Place of storage and use
Ⅵ Maintaining the unit (Turn off the power
before performing maintenance work.)
Avoid storing or using this VCR in the following
places:
Wipe the unit with a soft cloth.
Do not wipe it with thinner or benzene as it may
melt or tarnish the unit surface.
For stubborn stains, use water-diluted neutral
detergent and then wipe it dry.
● Excessively hot or cold places beyond the al-
lowable temperature for operation (5˚C –
40˚C).
● Humid or dry places beyond the allowable
humidity range for operation (30% – 80% RH).
Ⅵ Use the supplied AC adapter to connect
the unit to a power source.
● Dusty or sandy places.
● Places exposed to oil, smoke or steam, such
as the kitchen vicinity.
Ⅵ Use the supplied power cord.
Using a different type or damaged cord may
cause fire or electric shock.
● Intensely vibrating or unstable places.
● Places prone to condensation.
● Places that generate strong magnetic fields,
e.g., near a transformer or motor.
Ⅵ Do not use the supplied power cord for
other models.
● Places near devices that generate electric
waves, e.g., a transceiver or mobile phone.
● Places that generate X-ray radiation or cor-
rosive gases.
Ⅵ LCD screen
The LCD screen is designed and manufactured
with high-precision technology.
Ⅵ Handling the unit
Minute black dots may appear or bright (red, blue
and white) dots are permanently lit. This phe-
nomenon is not a product defect and the dots
are not recorded.
● Do not place heavy objects on the unit, like a
monitor or TV.
● Do not insert foreign objects into the cassette
slot.
● Mind your finger when loading a cassette
tape.
Be careful not to get your fingers clamped
when loading the cassette to prevent injury.
● Place this unit out of reach of young children
to prevent injury as fingers may get clamped
while a cassette tape is being loaded.
● Do not block the ventilation openings.
● Avoid strong impact to the unit. Do not drop
the unit.
● Remove the cassette tape from the cassette
slot when transporting the unit.
● Remove the AC adapter to save energy when
the unit is not in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-6
Regular maintenance
This unit uses consumables or components that will wear off. If a worn-out or deteriorated compo-
nent continues to be used, it may cause the unit to break down. To prevent this, perform routine
maintenance using the head-cleaning tape.With the head-cleaning tape alone, however, the entire
tape-winding mechanism cannot be completely cleaned.
Perform regular maintenance of the components as shown below.
Ⅵ Regular maintenance
The tasks of maintenance involved are similar to that of replacing the engine oil or tire of a car.
Depending on the number of usage hours, inspect or replace the components as follows:
— : Inspection
⅜ : Cleaning, inspection and
adjustment
ଁ : Cleaning and inspection;
Replacement if necessary
ⅷ : Replacement
Number of hours
Drum assembly (including head)
Head cleaner
500H 1000H 1500H 2000H 4000H
⅜
ଁ
⅜
—
⅜
ⅷ
ଁ
ଁ
⅜
ଁ
ଁ
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Tape guide, roller
Reel disk, tension bands
Work and frequency of mainte-
nance depend on the environ-
ment and usage.The above infor-
mation serves only as a guide.
Usage Time
: You can check the drum usage time with the hour meter display.
For details, refer to page 100, “Checking the hour meter.”
: For details on the maintenance plan and fee, consult with your
JVC-authorized service agent.
Maintenance consultation
Ⅵ Head cleaning
•
If the head is dusty, “HEAD CLEANING RE-
QUIRED!” will be displayed on the monitor
when this unit plays a tape.
•
Recording or playing back with a dirty head
will result in block noise or disrupted sound.
Perform regular head cleaning to maintain su-
perior image and sound quality.
HEAD CLEANING REQUIRED!
Block Noise
•
For information on how to use the head clean-
ing tape and the relevant remarks, refer to
page 8, “Cleaning tape”.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-7
INTRODUCTION
Cleaning tape
Use a JVC cleaning tape.
Follow the instructions below for using the clean-
ing tape.
Notes
● Under low humidity conditions, (10% RH to
30% RH), perform head cleaning at intervals
of half of the periods stated in the table.
1. Run the tape for 10 seconds in the PLAY
mode. (Thereafter, it stops automatically
and enters the STOP mode.)
● If an M-DV80 tape is used immediately after
cleaning, the message, “HEAD CLEANING
REQUIRED!”may not disappear.It does only
after the tape has run for some time.
• After loading the cleaning tape, press the
PLAY button.
● Use the cleaning tape at room temperature
(10˚C to 35˚C).
● Instructions for using the cleaning tape stated
on a sheet inside its storage case may be
different in part from those stated here.
2. For a single cleaning session, it can be re-
peated up to 4 times.
3. Refer to the following table as a guide for
cleaning.
Follow the instructions in this manual.
Operating environment
Low temperature
5˚C to 10˚C
Room temperature
10˚C to 35˚C
High temperature
35˚C to 40˚C
Frequency of
cleaning
1 to 2 times every
5 hours
1 to 2 times every
20 to 30 hours
1 to 2 times every
5 hours
Cassette tape
Ⅵ Erasure prevention
BR-DV6000 can record onto and playback stan-
dard DV and mini DV cassette tapes (for SP mode
only).
DV cassettes have a safety slide at the back to
prevent accidental erasure.
Use the following JVC cassettes with the
logo.
or the
•
To prevent accidental erasure of important
records, push the slide to the “SAVE” posi-
tion.
●
Standard DV cassettes
LA-DV276
LA-DV186
●
Mini DV cassettes
M-DV63PRO
M-DV60
•
To record, push the slide to the “REC” posi-
tion.
LA-DV124
M-DV30
Slide
Memo
● DVCAM cassette can be recorded in the DV
REC
format.
SAVE
● Tapes recorded in the DVCAM format can be
played (SP Mode).
● M-DV80 cassettes (Mini DV 80min tape) can-
not be used with this unit.
Remarks on the use of tape
● Do not load the videotape in the wrong direction.
● Store the tape only after it has been fully rewound, so as to avoid damaging the tape.
● Store the cassette in places low in humidity, well-ventilated and fungus-proof.
● When a cassette tape is used repeatedly, noise may increase due to e.g., dropout, etc. hence
affecting its performance. Do not use dirty or damaged tapes as they will shorten the life span of the
rotation head.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-8
Ⅵ For recording and storing videotapes in the best condition
Observe the following instructions for the best recording and storage of videotapes.
• Take care of the conditions of handling videotapes.
It is recommended that you record and store videotapes in the environment below.
Storage
Recording
Short period
(Up to 10 years)
15°C to 23°C
40% to 55%
–
Long period
(Over 10 years)
15°C to 19°C
25% to 35%
–
Temperature
Humidity
Hourly temperature change
Hourly humidity change
17°C to 25°C
30% to 70%
Less than 10°C
Less than 10%
–
–
• Do not leave the videotapes neglected for a long period.
If videotapes are left wound for a long period of time, it may result in distortion of the tape. Also it
may cause tape-to-tape adhesion (known as blocking). It is recommended that videotapes be
unspooled and rewound once a year for refreshing.
• When tapes are not in use, store them in cases and on end.
Storage cases protect videotapes from humidity, dust and ultraviolet. Keep tapes in cases and do
not store them lying flat. When housed in a horizontal position, pressure from other tapes can
cause distortions and deformations of the tape edges.
Condensation
• When this unit is moved from a cold to a warm
place abruptly, the vapor in the warm air will
come into contact with the head drum or the
tape guides, which are not warmed enough.
When chilled, the vapor turns into droplets of
water. This state is known as condensation.
When condensation occurs, the videotape
adheres to the head drum or the tape guides
and will be damaged.
• When condensation occurs, the monitor dis-
plays the following warning:
CONDENSATION ON DRUM
• Condensation occurs on this unit in the fol-
lowing circumstances:
* It is moved abruptly from a cold place to a
warm place.
Leave the unit with the power ON and wait
until the WARNING message disappears.
* It is used in a place immediately after the
heater has been turned on, or when cold
breeze from an air-conditioner blows onto it.
* It is used at a place of high humidity.
• Prevention of condensation
When transporting BR-DV6000 from a cold
to a warmer place abruptly, first remove the
cassette tape. Then place BR-DV6000 in a
plastic bag and seal it before transporting.
Head drum
Take out BR-DV6000 from the sealed plastic
bag only after it has the same temperature
as the surroundings.
Videotape
When a cassette tape is loaded, do not trans-
port e.g., from a cold outdoor place to a warm
room thus subjecting the unit to drastic tem-
perature changes.
After moving the unit, do not use it until the
inner mechanism stabilizes.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-9
NAMES AND FUNCTIONS
OF PARTS
– Front panel –
1
2
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
Mini
DISP
SET
PROFESSIONAL
REW
STOP
FF
3
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
1Cassette loading slot/LED
3Operation buttons
• For loading a cassette into or unloading it from
the slot.
Ⅵ [A. DUB] Audio dubbing button/LED
• Press this button for audio dubbing (after-re-
cording).
Insert a standard DV cassette or a mini DV
cassette. (☞ Page 38)
• When BR-DV6000 is in the OPERATE OFF
state and a cassette is loaded, it changes to
the OPERATE ON state.
• With a cassette loaded, the LED lights up in
green.
When a cassette is being loaded or ejected,
the LED flashes.
For audio dubbing, set AUDIO MODE in the
AUDIO MENU screen to “32K”.
The sound produced by the MIC terminal #
or the AUDIO IN terminal is recorded on chan-
nels CH3 and CH4.
• During audio dubbing, the red A. DUB LED
lights up.
• If the INPUT SELECT switch is set to DV,
audio dubbing cannot be performed.
(☞ Page 44 “Audio Dubbing”)
2[OPERATE] button/LED
• Press this button to turn on the power and
BR-DV6000 becomes ready for operation.
(Operate ON)
Ⅵ [REC] button/LED
• Hold down this button and press the PLAY
button to start recording. During recording,
the red LED lights up.
• Hold down this button and press the PAUSE
button to pause recording.
Press this button again when BR-DV6000 is
already on to turn off the power.
(Operate OFF)
• OPERATE LED lights up as follows.
Operate ON : the green LED lights up
Operate OFF : the red LED lights up
• If this button is pressed during recording, an
index signal is recorded on the tape (when
INDEXWRITE in the SYSTEM MENU screen
is set to ON).
VCR error
: the red LED blinks
Memo
• When this button is pressed in the STOP
mode, the time code generator value can be
checked while the button is being held down.
If TC DUPLICATE Menu is set to AUTO, the
time code, date and time of the DV input can
be checked.
● If DC IN MODE in the SYSTEM MENU screen
is set to “OPE ON” or the Timer Switch is set
to “REC” or “PLAY” and power is supplied to
the DC IN terminal located on the rear panel,
BR-DV6000 goes into the OPERATE ON
state even if this button is not pressed.
• If this button is pressed during playback, the
input signal can be checked while the button
is held down. (EE check)
● Even after the power is turned off with this
button, BR-DV6000 is live with a small amount
of electricity.
EE check is not available for DV signal input.
Therefore, if BR-DV6000 is not to be used
for a long period of time, please remove the
AC adapter to save energy.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-10
Ⅵ [PLAY] button/LED
Ⅵ [STOP] button
• Press this button to start playing back a tape.
During playback, the green LED lights up.
• When recording is paused, press this button
to resume recording.
• Press this button to stop operation.
• When BR-DV6000 is in the STANDBY OFF
mode, press this button to enter the
STANDBY ON mode.
• When audio dubbing is paused, press this
button to resume audio dubbing.
Memo
There are two stop modes.
● STANDBY OFF: For protecting the tape and
the drum, the drum does not rotate.
Ⅵ [PAUSE] button/LED
• During recording, press this button to pause
it.
• In the PLAYBACK or STOP mode, press this
button to enter the STILL mode. In the RE-
CORDING PAUSE or STILL mode, the green
LED lights up.
● STANDBY ON: The drum rotates so that it
starts up faster after BR-DV6000 moves into
another mode.
Ⅵ [REW] button/LED
• When BR-DV6000 enters the STOP mode,
press this button to rewind the tape.
• When BR-DV6000 is in the STILL mode, hold
down the A.DUB button and press this but-
ton to enter into the audio-dubbing pause
mode.
• When BR-DV6000 is in the STILL mode,
press this button for frame advance playback.
• When BR-DV6000 is in the PLAYBACK or
STILL mode, press this button for reverse
playback.The rewind playback speed can be
changed by pressing the SEARCH +/: but-
ton * or the SEARCH –/; button (when
“;,:” KEY FUNC in the SYSTEM (1/2) Menu
screen is set to VAR).
Memo
Still images or images in frame advance can
be selected with STIL/F.ADV of the SYSTEM
(1/2) MENU screen.
(☞ Page 50 “Search Mode”)
• Hold down the PLAY button and press this
button to perform playback in the reverse di-
rection at 0.9 times the normal speed. At this
state, if the PLAY button is released first, the
playback continues at 0.9 times the normal
speed.
If this button is released first, it plays back at
the normal speed.
• During rewinding or rewind playback, the LED
lights up in green.
Ⅵ [FF] button/LED
• When BR-DV6000 enters the STOP mode,
press this button to fast-forward the tape.
• When BR-DV6000 is in the PLAYBACK or
STILL mode, press this button for fast-forward
playback. The fast forward playback speed
can be changed by pressing the SEARCH
+/ : button * or the SEARCH –/; button
(when “;,:” KEY FUNC in the SYSTEM
(1/2) Menu screen is set to VAR).
Ⅵ [EJECT] button
• Press this button to eject the cassette.
(☞ Page 50 “Search Mode”)
• Hold down the PLAY button and press this
button to perform playback in the forward di-
rection at 1.07 times the normal speed. At
this state, if the PLAY button is released first,
the playback continues at 1.07 times the nor-
mal speed.
Memo
● It takes about 6 seconds for the cassette to
be ejected.
● The cassette can be ejected even when BR-
DV6000 is in the OPERATE OFF mode. Af-
ter the eject action is completed, BR-DV6000
returns to the OPERATE OFF mode.
If this button is released first, it plays back at
the normal speed.
• During fast-forwarding or fast-forward play-
back, the LED lights up in green.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-11
NAMES AND FUNCTIONS
OF PARTS
– Front panel – (continued)
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
Mini
DISP
SET
PROFESSIONAL
REW
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
9
8 7 6 5 4
4[REMOTE/LOCAL] switch
This switch is used to select how BR-DV6000
is to be operated.
5 [INPUT SELECT] switch
This switch is used to select input signals.
DV
: For DV signals of the DV IN/OUT
terminal (IEEE1394)
LOCAL : Use this setting if BR-DV6000 is to
be controlled with the key operation
of the unit.
REMOTE : Use this setting if BR-DV6000 is to
be controlled using the edit control-
ler connected to the REMOTE 1 (9-
PIN) terminal or REMOTE 2 (12-
PIN) terminal.
LINE
: For inputting the composite images
of the LINE IN terminal and ana-
log audio signals.
Y/C (CPN) : For inputting theYC separate video
signal of the Y/C IN terminal and
the component video signal of the
COMPONENT IN terminal. The
selection of the YC separate sig-
nal or the component video signal
can be done with VIDEO INPUT
SEL in the VIDEO MENU screen.
For audio, analog sound is input.
When it is set to REMOTE, settings
can be performed at the REMOTE
(1/2) MENU screen to enable/dis-
able operation via the 9-PIN or 12-
PIN REMOTE terminal.
The 9-PIN REMOTE 1 terminal can
be selected using REMOTE SEL 9
PIN while the 12-PIN REMOTE 2
terminal can be selected with RE-
MOTE SEL JVC.
Note
Switching is invalid during recording.
6[AUDIO OUTPUT] switch
Use this switch to select the audio channel from
the headphone terminal and the AUDIO OUT
terminal located on the rear panel.
Memo
● To control BR-DV6000 with the SERIAL RE-
MOTE terminal or DV terminal, this switch set-
ting can be set up with REMOTE SEL SE-
RIAL or REMOTE SEL DV in the REMOTE
(1/2) MENU screen. (☞ Page 75)
● If it is set to REMOTE, the buttons that can
be operated from the unit are selectable from
LOCAL FUNCTION in the REMOTE (1/2)
MENU screen.
This switch is valid in the following conditions.
• During playback of tapes recorded in the 32k
audio mode
• In the EE mode for DV input in the 32k audio
mode
• During audio dubbing
CH-1/2 : For outputting the sound of the
channels CH1 and CH2.
MIX
: For outputting the mixed sound of
CH1 and CH3 from the CH-1/3 AU-
DIO OUT terminal and the mixed
sound of CH2 and CH4 from the CH-
2/4 AUDIO OUT terminal.
CH-3/4 : For outputting the sound of CH3 and
CH4.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-12
Memo
8[COUNTER] switch
The switch changes the contents of the coun-
ter display of the 9 LCD and the monitor.
CTL : It displays the counter in hour, minute,
second and frame based on CTL (con-
trol signal).
● For the MIX setting, noise is sometimes gen-
erated.If it occurs, set it to CH-1/2 or CH-3/4.
● In the 48 K audio mode, it is fixed at chan-
nels CH1 and CH2 regardless of the setting
of the switch.
TC : It displays the time code data.
UB : It displays the user’s bit (UB).
7 [AUDIO MONITOR] switch
Use this switch to select the audio channel for
output signals from the headphone terminal and
the AUDIO MONITOR terminal located on the
rear panel.
9LCD
Ⅵ In the playback, still or search mode, it
displays the playback image.
In the recording, recording pause, stop, fast-for-
warding or rewinding mode, it displays the in-
put image.
The output signal of the AUDIO MONITOR OUT
terminal is monaural.
L
: For outputting the sound of CH1.
MIX : For outputting the mixed sound of CH1
Ⅵ The following information is also dis-
and CH2.
played.
R
: For outputting the sound of CH2.
• Various types of information (status display),
e.g., operation mode, date/time, counter
• Menu screen
• Warning display
(For details, ☞ Page 20)
Memo
In the following conditions, if this switch and the
6 AUDIO OUTPUT switch are used in combi-
nation, the AUDIO MONITOR OUT outputs the
sounds listed as in the following table.
• During playback of tapes recorded in the
32 K audio mode
Memo
● Use the * DISP button to enable/disable the
LCD display and the display style.
• In the EE mode for DV input in the 32 K audio
mode
● LCD-related settings, e.g., brightness adjust-
ment of the LCD, are performed in the DIS-
PLAY MENU screen.
• During audio dubbing
AUDIO switch
MONITOR OUT
output channel
(☞ Page 39 “Setting the LCD display”)
MONITOR OUTPUT
(☞ Page 82 “DISPLAY MENU screen”)
CH-1/2
MIX
CH1
● If the same image pattern is kept displayed
on the LCD display for a prolonged period of
time, “ghosting”, the permanent etching of a
pattern on a display screen, may occur. To
prevent this, turn off the LCD display when it
is not in use.
L
MIX
R
CH1/3 mix
CH3
CH-3/4
CH-1/2
MIX
CH1/2 mix
CH1/2/3/4 mix
CH3/4 mix
CH2
CH-3/4
CH-1/2
MIX
CH2/4 mix
CH4
CH-3/4
Download from Www.Somanuals.com. All Manuals Search And Download.
E-13
NAMES AND FUNCTIONS
OF PARTS
– Front panel – (continued)
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
Mini
DISP
SET
PROFESSIONAL
REW
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
0[REC LEVEL] Volume for audio
$[HOLD] button
If this button is pressed in the LCD enlarged
display mode, the time code preset screen will
be displayed on the LCD. When the time code
preset screen is displayed, press this button to
return to the normal display.
recording level for CH1/3 and
CH2/4
Use the switch to adjust the audio recording level
for CH1 and CH2.
During audio dubbing, the audio recording level
for CH3 and CH4 can be adjusted with this
switch.
(☞ Page 59 “Presetting time code”)
%[MENU] button
If this button is pressed when BR-DV6000 is in
the STOP/STILL mode or when no cassette is
loaded, the menu is displayed on the LCD or
the monitor connected to theVIDEO MONITOR
OUT terminal.
Memo
● During DV input, the volume control is not
effective.
● During MIC input, only the volume for CH1/3
REC LEVEL is valid.
When the menu is displayed, press this button
to return to the normal display.
(☞ Page 70 “Setting the menu”)
![PHONES] terminal
This is the mini jack terminal for connecting to
the headphone. (Stereo ø3.5)
^[RESET] button
• When BR-DV6000 plays back tapes recorded
in the 32 kHz mode, the audio channel for
outputting from this terminal is selected with
the 6 AUDIO OUTPUT switch.
• To reset the CTL counter display to“00”, press
this button.
• If this button is pressed when the time code
preset screen is displayed, all the digits of
the time code or the user’s bit are reset to
“00”.
• When the Multi Cue-up screen is displayed,
press this button to clear the registered cue-
up points.
@[PHONES] Headphone volume
Use this switch to adjust the output level of the
PHONES terminal.
Both channels are adjusted at the same time.
#[MIC] terminal
&[CUE UP] button
This is the mini jack terminal for monaural mi-
crophone input.
When the
COUNTER switch is set to TC,
8
press this button to display the Multi Cue-up
screen on the monitor or LCD.
When the Multi-Cue-up screen is displayed,
press this button to start searching the selected
tape position.
To input sound from a microphone, set the IN-
PUT SELECT switch to LINE or Y/C (CPN).
If a microphone is connected, sound for the AU-
DIO IN terminal located on the rear panel can-
not be input.
(☞ Page 54 “Multi Cue-up”)
The sound of the microphone is recorded to
CH1/CH2 in the recording mode and CH3/CH4
in the audio-dubbing mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-14
Ⅵ [SEARCH–/;] button
*Special functions/Setting buttons
The following buttons have different functions
depending on whether the normal screen or the
setting screen is displayed.
• During normal display, the function of this but-
ton can be selected using “;,:” KEY FUNC
in the SYSTEM (1/2) Menu screen.
If it is set to VAR, the searching speed de-
creases if this button is pressed during a
search operation.
Setting screens:
Menu, Date/Time setting, Time code preset and
Multi Cue-up
(☞ Page 50 “Search mode”)
Ⅵ [DISP/8] button
If it is set to INDEX, press this button to start
reverse index search.This function is not ef-
fective during recording or recording pause.
(☞ Page 52 “Index search”)
• When the setting screen is displayed, this but-
ton is used to return to the previous menu or
select setting digits.
• During normal display, this button is used to
enable/disable the LCD or select display style.
When this button is pressed, the LCD dis-
play changes in the following manner.
Enlarged character display ¥ Image/
enlarged character display ¥ Image/charac-
ter display ¥ Image display ¥ No display
¥ Enlarged character display...
Ⅵ [SET] button
• When the Menu screen, Date/Time setting
screen or the Multi Cue-up screen is dis-
played, press this button to confirm the set-
ting value.
• When the time code preset screen is dis-
played, press this button to preset the se-
lected time codes or user’s bit to the time code
generator.
• When the setting screen is displayed, this but-
ton is used to select the items or setting val-
ues.
Ⅵ [BLANK/9] button
• When BR-DV6000 is in the stop mode, press
this button to start blank search. It searches
the unrecorded part of the tape and goes into
the still mode.
(☞ Page 52 “Blank search”)
• When the setting screen is displayed, this but-
ton is used to select the items or setting val-
ues.
Ⅵ [SEARCH+/:] button
• During normal display, the function of this but-
ton can be selected using “;,:” KEY FUNC
in the SYSTEM (1/2) Menu screen.
If it is set to VAR, the searching speed in-
creases if this button is pressed during a
search operation.
(☞ Page 50 “Search mode”)
If it is set to INDEX, press this button to start
forward index search. This function is not ef-
fective during recording or recording pause.
(☞ Page 52 “Index search”)
• When the setting screen is displayed, this but-
ton is used to select items or setting digits.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-15
NAMES AND FUNCTIONS
OF PARTS
– Rear panel –
1
6
7
! @
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
2
3
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
4
OUT
$
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
5
8
0
9
# %
1[VIDEO LINE IN] terminal (BNC)
5[VIDEO MONITOR OUT] terminal
This is the input terminal for composite video
signals.
(BNC)
This terminal is for connecting to a monitor-TV.
• It outputs composite video signals.
• It displays the Menu setting screen, Date/
Time setting screen and warning information.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be dis-
played on-screen, e.g., the operation mode,
date/time and counter. (☞ Page 20)
• To input video via this terminal, set the IN-
PUT SELECT switch located on the front
panel to “LINE”.
2[VIDEOY/C IN] terminal (4-PIN)
This is the input terminal forYC separate video
signals.
• To input video via this terminal, the following
settings are required.
Set VIDEO INPUT SEL in the VIDEO Menu
screen to “Y/C”.
Set the INPUT SELECT switch located on
the front panel to “Y/C (CPN)”.
• When wide-screen ID signals are input, the
wide-screen ID signal is recorded.
6 [COMPONENT IN] terminal
(BNC
ן 3) This is the input terminal for component video
signals (Y/R-Y/B-Y).
• To input video of this terminal, the following
settings are required.
Set VIDEO INPUT SEL in the VIDEO Menu
screen to COMPONENT.
Set the INPUT SELECT switch located on
the front panel to “Y/C (CPN)”.
3[VIDEO LINE OUT] terminal (BNC)
This is the output terminal for composite video
signals.
4[VIDEOY/C OUT] terminal (4-PIN)
This is the output terminal forY/C separate video
signals.
7[COMPONENT OUT] terminal
(BNC
ן 3) This is the output terminal for component video
signals (Y/R-Y/B-Y).
• When tapes that have recorded wide-screen
signals are played back, the wide-screen ID
signal is output.
Memo
Whether or not to enable SET UP for analog
signals (composite, YC separate and compo-
nent signals) can be selected with SET UP in
the VIDEO Menu screen (for NTSC only).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-16
8[SYNC IN] synchronization input
#[CH1/3 AUDIO OUT] terminal
terminal (BNC)
(RCA)
This is the terminal for inputting reference syn-
chronization signals from an external source.
For external synchronization signals, input com-
posite video signals of 1V (p-p) or lower (e.g.,
black burst signal).
Use this terminal to output analog audio sig-
nals.
In the 48k audio mode, it outputs the sound of
CH1.
When audio dubbing is paused, it outputs the
sound of CH3.
(☞ Page 29 “Synchronization signal”)
In the 32k audio mode, the sound is selected
with the AUDIO OUTPUT switch located on the
front panel.
9[TIME CODE IN] terminal (BNC)
This is the EBU-compliant time code input ter-
minal.
(Refer to the table below.)
It is for connecting to an external time code gen-
erator.
$[CH2/4 AUDIO OUT] terminal
For external time code signals, use those that
synchronize with the video signals.
• To input external time codes, set TCG
SOURCE of theTC/UB/CLOCK Menu to “EX-
TERNAL”.
(RCA)
Use this terminal to output analog audio sig-
nals.
In the 48k audio mode, it outputs the sound of
CH2.
When audio dubbing is paused, it outputs the
sound of CH4.
In the 32k audio mode, the sound is selected
with the AUDIO OUTPUT switch on the front
panel.
0[TIME CODE OUT] terminal (BNC)
This is the EBU-compliant time code output ter-
minal.
It outputs time codes recorded on the tape dur-
ing playback and data generated by the time
code generator during recording.
With the COUNTER switch set to CTL, time
code is not output.
(Refer to the table below.)
Memo
In the following modes, the channel that receives
output signals from the AUDIO OUT terminal
can be selected with the AUDIO OUTPUT
switch.
• During playback of tapes recorded in the 32k
audio mode
• During audio dubbing
• In the EE mode for DV input in the 32k audio
mode
![CH1/3 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C (CPN)”.
Usually, analog signals are recorded on CH1.
For audio dubbing, they are recorded on CH3.
@[CH2/4 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C (CPN)”.
AUDIO OUT terminal
AUDIO OUTPUT
switch
CH1/3
CH1
CH2/4
CH2
CH1/2
MIX
Usually, analog signals are recorded on CH2.
For audio dubbing, they are recorded on CH4.
CH1, 3 mix
CH3
CH2, 4 mix
CH4
Memo
CH3/4
If the AUDIO IN terminal and the MIC terminal
located on the front panel are used simulta-
neously, the MIC terminal will precede.
%[AUDIO MONITOR] terminal (RCA)
This terminal is for connecting to a monitor TV
and monitors the sound from its speakers.
Monaural sounds are output.
• The audio channel to be monitored can be
selected with the AUDIO MONITOR switch
located on the front panel.
For audio channels that receive output sig-
nals from this terminal in the 32k audio mode,
refer to the table in page 13.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-17
NAMES AND FUNCTIONS
OF PARTS
– Rear panel – (continued)
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
›
fi
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
&
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
* ^ ( ⁄ ¤ )
‹
)[TIMER] recording/playback
^DC power input terminal (2-PIN)
This terminal is for inputting DC 12 V. Connect
the DC power cord of the supplied AC adapter.
switch
This switch is for setting BR-DV6000 to start
timer recording or timer playback when power
is supplied to the ^ DC power input terminal
according to an external timer.
OFF : No timer recording or timer playback.
REC : When power is supplied, BR-DV6000
starts recording automatically.
(Timer recording)
PLAY : When power is supplied, BR-DV6000
starts playback automatically.
Memo
● When power is supplied to this terminal, the
OPERATE indicator located on the front panel
lights up. (The indicator turns red when BR-
DV6000 is in the OPERATE OFF state)
● Whether to set BR-DV6000 to enter the OP-
ERATE ON mode or OPERATE OFF mode
when power is supplied to the terminal can
be selected with DC IN MODE in the SYS-
TEM (2/2) Menu screen.
(Timer playback)
Memo
● If the ) TIMER switch on the rear panel is
set to “REC”or “PLAY”, recording or playback
will be automatically started when power is
supplied to the terminal. (Timer recording/
playback)
● If theTIMER switch is set to “REC”or “PLAY”,
BR-DV6000 automatically enters the OPER-
ATE ON mode upon DC power on even when
DC IN MODE in the SYSTEM (2/2) Menu
screen is set to “OPE OFF”.
&[SIGNAL GND] terminal
This is the grounding terminal for signals.
*DC power cord clamp
⁄[SERIAL REMOTE IN] terminal
(mini jack)
Use this clamp to fasten the DC power cord.
This terminal is for connecting to the serial re-
mote controller RM-G30 (sold separately).
To operate BR-DV6000 with this terminal, per-
form the following settings.
([DV IN/OUT] terminal
This is the input/output terminal for IEEE1394-
compliant digital signals. It is for connecting to
video equipment with a DV terminal.
• To enable signal input via this terminal, set
the INPUT SELECT switch located on the
front panel to “DV”.
• Set REMOTE SEL SER in the REMOTE
(1/2) Menu screen to “ON” or “LOC+REM”.
ON
: When the 4 REMOTE / LOCAL
switch on the front panel is set to
“REMOTE”, this terminal becomes
effective.
• Signals that come from this terminal are out-
put regardless of the setting of the INPUT
SELECT switch.
• If REPLICATION of the SYSTEM (2/2) Menu
is set to DV, the REC command is output from
this terminal when BR-DV6000 begins play-
back. (REPLICATION mode)
LOC+REM: This terminal is effective regardless
of the setting of the 4 REMOTE /
LOCAL switch on the front panel.
Memo
● To use this terminal as the foot switch input,
set FOOT SW in the REMOTE (2/2) Menu
screen. (☞ Page 77)
• Set PB/DV IN in the SYSTEM(2/2) Menu
screen according to the signal format to be
input to this terminal. (NTSC or PAL)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-18
¤[SERIAL REMOTE OUT] terminal
›[REMOTE2] JVC Bus terminal
(mini jack)
(12-PIN)
• This terminal is for direct through-output of
serial commands of the serial remote input
terminal. (Only with OPERATE ON)
This terminal is for connecting to the JVC bus
interface-compatible editing remote controller
(RM-G800).
With this terminal, BR-DV6000 can be used as
a player or recorder of an editing system.
To operate BR-DV6000 with this terminal, per-
form the following settings.
• Set REMOTE SEL JVC in the REMOTE
(1/2) Menu screen to “ON”.
• If REPLICATION of the SYSTEM (2/2) Menu
screen is set to SERIAL, this terminal out-
puts REC commands when BR-DV6000 be-
gins playback.(REPLICATION mode)Use this
function to connect BR-DV6000 to a dubbing
device for dubbing its playback video or play-
back sound.
• Set the 4 REMOTE / LOCAL switch on the
front panel to “REMOTE”.
‹
[REMOTE1] RS-422A terminal
fiSlot cover for an optional board
This cover can be removed to install any of the
following optional boards.
(D-SUB 9-PIN)
This terminal is for connecting to an RS-422A
serial interface-compatible editing remote con-
troller (e.g. RM-G820).
• SA-DV6000 network board
• SA-X61U AUDIO XLR IN board (2ch)
• SA-X62U AUDIO XLR OUT board (2ch)
With this terminal, BR-DV6000 can be used as
a player or recorder of an editing system.
To operate BR-DV6000 with RS-422A, perform
the following settings.
Memo
● With the SA-X61U AUDIO XLR IN board in-
stalled, whether sound signals are input to
the XLR IN terminal or the AUDIO IN termi-
nal can be selected with AUDIO INPUT SEL
in the AUDIO MENU. If the MIC terminal is in
use, the MIC terminal precedes.
● With the SA-X62U AUDIO XLR OUT board
installed, the audio channel to which signals
are output can be selected with the AUDIO
OUTPUT switch.
• Set REMOTE SEL 9-PIN in the REMOTE
(1/2) Menu screen to “ON”.
• Set the 4 REMOTE / LOCAL switch on the
front panel to “REMOTE”.
Memo
● Use screws, of the metric, not inch, system,
for fastening the connectors.
● This part can be replaced by the RS-232C
serial interface board SA-K46U (sold sepa-
rately).
Consult your JVC authorized service agent
for such replacements.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-19
ON-SCREEN DISPLAY
– On-screen display –
Besides E-E images and playback images, the monitor connected to the VIDEO MONITOR OUT
terminal provides the following on-screen information. Press the DISPLAY button to display the
same information on the LCD screen of BR-DV6000.
DISP button
DISPLAY (1/2) Menu screen
Monitor
OPERATE
VIDEO
–
–
–
I
D
I
S
T
P
N
L
A
S
Y
S
[
1
/
2
]
–
–
–
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
MONITOR
OUTPUT
Mini
DISP
SET
L
L
L
L
D
C D
B
R
G H
E
0
0
PROFESSIONAL
C D C H R O M A
C D C O N
T
O
R
A
O
S
F
T
F
0
REW
MIC
BLANK
C D
A
L
T
U
A
E
P
B
T
Y
R
A G E
A
O
F
F
I
S
P
O N
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
C O U N
P O S
I
.
L
OW E
R
-
R
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
N
P
E
X
T
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
A G E
C
K
LCD screen
On-screen display
Status display
Description
Operation
Displays the setting status of theVCR Settings can be performed with DIS-
operation mode, date/time, counter.
PLAY in the DISPLAY (1/2) Menu
screen.
Displays the operating status of blank ON
search, index recording/search.
: Always display. According
to each event or error, the
event and alarm displays
are shown for about 3 sec-
onds.
Event display
Alarm display
Displays error/alarm messages for in-
correct operation or improper condi-
tion of BR-DV6000.
AUTO : It displays for about 4 sec-
onds during
changes.
mode
OFF
: No on-screen display. The
alarm display is shown ac-
cording to errors, which
occurred.
Display on the LCD
The on-screen display changes
whenever the DISPLAY button is
pressed.
(☞ Page 26)
When an error occurred with theVCR, It is displayed automatically when an
it displays warnings with the relevant error with the VCR occurred.
error codes. (☞ Page 98)
Warning display
Menu display
Displays the menu setting screen.
When BR-DV6000 enters the STOP/
STILL mode or no cassette tape is
loaded, the menu is displayed when
the MENU button is pressed.
(☞ Page 69)
Displays the Multi Cue-up screen for When BR-DV6000 enters the STOP,
registering or selecting cue-up STILL or PLAY mode, press the
Multi Cue-up screen
(searching) point. (☞ Page 54)
Cue-up button to display the Multi
Cue-up screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-20
ON-SCREEN DISPLAY
– Status display –
Ⅵ Status display: It displays the current settings and operating status.
Memo
3 2 K C H – 1 / 2
A S S EM
S P 0 0 0 m i n
● With the DATE REC function in use, the last
line is fixed to the date/time display. The in-
formation displayed on the last line moves to
the line above. (DATE REC function:☞ Page
81)
-
0 0
2 0
0 3
1 1
/
:
0 4
2 0
/
:
0 3
0 0
S T A N D B Y O F F
T C R 0 2
:
0 0
:
:
:
:
0 0
0 0
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
0 3
/
0 4 0 3 1 1
/
T C R 0 2 : 0 0 : 0 0 : 0 0
No.
Item
Description
• Sampling frequency
During recording, the setting value of AUDIO MODE in the
AUDIO Menu screen is displayed (32k or 48k).
During playback, the sampling frequency of the sound re-
corded on the tape is displayed (32k, 48k, 44.1k).
During DV signal input, the sampling frequency of the sound
input is displayed.
Sampling frequency/audio
output CH
1
Memo
If the counter display position
is set to the upper left, this
item will be displayed on the
lower right.
• A.LOCK
Lights up when the video and audio sampling clocks (at
48kHz) are synchronized in the PLAYBACK mode.
Always lights up in the RECORDING mode and EE mode.
• Audio output channel
During playback, the audio channel output from the AUDIO
OUT terminal is displayed (CH1/2, CH3/4, MIX). (only in
32k mode)
• With AUDIO INFO. in the DISPLAY Menu screen, whether
to display this item can be selected.
• It displays the date (DD/MM/YY) and time (HR:MM:SS).
• When the unit is in the RECORDING or STOP mode, it
displays the data of the built-in clock.
Date/time
Memo
2
If the display position of the
counter is set to the lower
left, this item will be dis-
played on the lower right.
• During playback, fast-forwarding or rewinding, the data re-
corded on the tape is displayed.
• During DV signal recording, the data from the DV terminal
is displayed.If the REC button is pressed in the STOP mode,
the input data from the DV terminal will be displayed.
• The style for displaying the date and time can be selected
with DATE STYLE and TIME STYLE in the DISPLAY Menu
screen.
• Whether to display date/time and the type of display can be
selected with TIME/DATE in the DISPLAY Menu screen.
• When the data/time is not set or when a tape is played with
no date/time data recorded, “– –” will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-21
ON-SCREEN DISPLAY
– Status display – (continued)
3 2 K C H – 1 / 2
A S S EM
S P 0 0 0 m i n
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
No.
Item
Description
Counter display
Displays the CTR counter, time code or user’s bit. The dis-
played contents can be selected using the COUNTER switch.
• CTL counter: It will be displayed if the COUNTER switch is
set to CTL. The counter shows a 7-digit
number (hour, minute, second and frame) with
+ or – and “CTL” at the beginning, e.g., CTL-
9:30:20:10
3
• Time code : It will be displayed if the COUNTER switch is
set to TC. The time code shows an 8-digit
number (hour, minute, second and frame)
At playback, the time codes recorded on the
tape are displayed.
The prefix indicates the time code mode.
TCG : Time code generator data
TCR : Time code reader data
DTCG : Time code data received from the DV IN / OUT
terminal
ETCG : External time code generator data
Depending on the framing mode, the symbols for the sec-
onds and frames are different (only for NTSC).
00 : 00 : 00 : 00
Dot (.) for the drop frame mode
¥ Colon(:)forthenon-dropframemode
• User’s bit : it will be displayed if the COUNTER switch is
set to UB.
The user’s bit is an 8-digit number (each digit
is a number or character from 0 – F).
The prefix indicates the user’s bit mode.
UBG : User’s bit generator data
UBR : User’s bit reader data
DUBG : User’s bit reader data received from the DV IN /
OUT terminal
EUBG : External user’s bit generator data
Memo
● The position of the counter display can be changed with
COUNTER POSI in the DISPLAY Menu screen.
● The counter display can be turned on/off with TIME
CODE in the DISPLAY Menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-22
ON-SCREEN DISPLAY
– Status/Event display –
No.
Item
Description
VCR operation mode
Displays the VCR operation mode, including:
4
PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF, STILL,
REC, REC PAUSE, A.DUB, A.DUB PAUSE, ASSEM EDIT, INSERT
EDIT, SHTL (shuttle search), JOG, BLANK SRH (blank search),
NO CASSETTE (cassette tape not loaded), OPERATE OFF.
For SHTL and JOG, the speed is also displayed.
• The display can be turned on/off with VTR MODE in the DISPLAY
Menu screen.
Remaining tape
Displays the remaining time of tape (minutes).
Not displayed when the remaining time is being confirmed.
• The display can be turned on/off with TAPE REMAIN in the DIS-
PLAY Menu screen.
• The SP display disappears when a DVCAM cassette tape is be-
ing played back.
• This remaining tape time display is only for reference.
5
6
Memo
If the counter display po-
sition is set to the upper
right, this item will be dis-
played on the lower right.
Edit mode display
Displays the edit mode selected, e.g., by using the edit mode controller.
• ASSEM :Assemble editing
Memo
• INS V
• INS A
:Video insert editing
:Audio insert editing (Audio: both CH 1 and CH 2)
● With the counter dis-
play shown on the top
left, this display ap-
pears on the bottom
right.
• INS VA :Video, audio insert editing (Audio: both CH 1 and
CH 2)
• INS VA :Video/Audio insert editing
• INS TC :Time code insert editing (Time code only)
Insert editing in the 32 k audio mode
• INS A12 :CH1, CH2 audio
● In the 48 k audio mode,
insert editing is not
possible in the follow-
ing cases.
INS A1, INS A2, INS
VA1, INS VA2
• INS A34 :CH3, CH4 audio
• INS VA12:Video & CH1, CH2 audio
• INS VA34:Video & CH3, CH4 audio
• INS A
:CH1 to CH4 audio
• INS VA :Video & CH1 to CH4 audio
The display can be turned on/off with EDIT INFO in the DISPLAY
Menu screen.
Ⅵ Event display : When certain functions are in use, it is displayed at the following posi-
tions (with the DISPLAY mode ON or AUTO).
● “A” display: displayed during operation
3 2 K C H – 1 / 2
S P 0 0 0 m i n
Display
Description
Blank search in progress.
BLANK
SEARCH
A
B
B L A N K S E A R C H
I N D E X D E T E C T E D
Index search in progress.
The number indicates the index
search position.
INDEX +1
When an index has been speci-
fied on the tape during record-
ing.
INDEX MARK
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
● “B” display: displayed for about 3 seconds
Display
INDEX
DETECTED
Description
An index has been detected
during index repeat operation.
The video end has been de-
tected during end repeat op-
eration.
VIDEO END
DETECTED
Download from Www.Somanuals.com. All Manuals Search And Download.
E-23
ON-SCREEN DISPLAY
– Alarm display –
Ⅵ Alarm display: An alarm message is displayed at the following positions when there has
been an operation error or when BR-DV6000 is not in good condition,
e.g., dirty head.
3 2 K C H – 1 / 2
S P 0 0 0 m i n
A
B
H E A D C L E A N I NG R E QU I R E D !
NO D V S I GN A L
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
● “A” display : The state of BR-DV6000 is displayed. It continues to be displayed until the error state is
corrected. This display is not affected by the setting of the display mode.
Display
Description
The voltage of the DC power source is low. If the operation continues, it enters
the Operate OFF mode.
LOW VOLTAGE
The video head is dirty. Clean it with the head-cleaning tape exclusively for BR-
HEAD CLEAN-
ING REQUIRED!
DV6000. (☞ Page 8)
If the head is clogged, it is detected in the PLAYBACK mode and this message
is displayed.
The temperature inside BR-DV6000 has exceeded the stated value.
Disconnect the power and place it at a cool place. If this message is displayed
again, BR-DV6000 could be defective.
OVERHEATING!
Consult your JVC-authorized service agent.
● “B” display : Messages for incorrect operation are displayed for about 3 seconds.
They are displayed when the DISPLAY mode is ON or AUTO.
Display
Description
Data tape for PCs or DVC PRO tape is used.
The cassette tape will be automatically ejected.
INVALID TAPE!
The user attempted to play back a tape recorded in the LP mode.
BR-DV6000 cannot record or play in the LP mode.
LP TAPE!
The user attempted to record without DV signal input.
The user attempted to record copy-guarded signals.
NO DV SIGNAL
COPY INHIBIT
REC INHIBIT
The user attempted to record on a tape that is not ready for recording (the rear
switch is set to SAVE).
The user attempted to record analog signals when PB/DV IN in the SYSTEM
(2/2) Menu is set to NTSC.
REC INHIBIT
(NTSC/PAL)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-24
Display
Description
A. DUB INHIBIT
(REC TAB)
The user attempted to perform audio dubbing on a tape that is not ready for
recording (the rear switch is set to SAVE).
A. DUB INHIBIT
(48 K)
This message is displayed when audio dubbing is attempted under the following
conditions.
• AUDIO MODE of the AUDIO Menu screen is set to 48 K.
• The tape is recorded with a sampling frequency of 48kHz
A. DUB INHIBIT
(LP)
The user attempted to perform audio dubbing on a tape recorded in the LP
mode.
A. DUB INHIBIT
(BLANK)
The user attempted to perform audio dubbing of a blank tape.
A. DUB INHIBIT
(DV)
The user attempted to perform audio dubbing during DV signal input (with the
INPUT SELECT switch set to “DV”).
A. DUB INHIBIT
(NTSC/PAL)
The user attempted audio dubbing when PB/DV IN in the SYSTEM (2/2) Menu
screen is set to NTSC.
A. DUB INHIBIT
(DVCAM)
The user attempted to perform audio dubbing on a DVCAM format tape.
EDIT INHIBIT
(REC TAB)
The user attempted to edit a tape that cannot be recorded (with the rear switch
set to “SAVE”).
EDIT INHIBIT
(LP)
The user attempted to edit a tape recorded in the LP mode.
EDIT INHIBIT
(BLANK)
The user attempted to insert-edit an unrecorded part of a tape.
EDIT INHIBIT
(NTSC/PAL)
The user attempted editing when PB/DV IN in the SYSTEM (2/2) Menu screen is
set to NTSC.
EDIT INHIBIT
(DVCAM)
The user attempted to edit a tape recorded in the DVCAM format.
The user attempted editing in an audio combination that cannot be edited.
The user attempted time-code insert-editing during DV signal input.
EDIT INHIBIT
(AUDIO)
EDIT INHIBIT
(DV TC INS)
DV EE INHIBIT
This message is displayed when the REC button is pressed during playback
with the INPUT SELECT switch set to DV.
(EE check is not allowed during DV input.)
OPERATION
LOCK
This message is displayed when an operation button is pressed with OPERA-
TION LOCK enabled. To enable OPERATION LOCK, set OPERATION LOCK in
the SYSTEM (2/2) Menu screen to ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-25
ON-SCREEN DISPLAY
– LCD display –
There are two display modes for the status display on the LCD of the unit.
• Same character display mode as the monitor output
• LCD display mode (enlarged display)
DISPLAY button
The LCD display mode changes in the following sequence
whenever the DISPLAY button is pressed (with DISPLAY
of the DISPLAY Menu screen set to ON or AUTO).
OPERATE
PLAY
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
A.DUB
EJECT
REC
PAUSE
FF
Mini
DISP
SET
PROFESSIONAL
REW
STOP
MIC
BLANK
Enlarged
Image/enlarged
character display
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
character display
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
No
display
Image
display
Image/
character display
LCD
Memo
● With LCD AUTO OFF in the DISPLAY Menu screen, the LCD display can be set to disappear if it
continues to be on for a certain time.
When the display goes off automatically, press any button to return to the original display mode.
● The LCD display area is smaller compared with the one for the actual images.
Ⅵ LCD display mode (enlarged display)
1 6
!
OVER
dB
CH1/3
40 30
20
10
0
48k
L
2
1
3
7
OVER
CH2/4
4
5
NTSC
T
C
FREE
PLAY
12H 34M 34S10F
^
*
W
e
CF
SP222min
01/02/03
8
9
Y/C SYNC
AM 01:23:45 INS VA
r
%
0
@
#
$
&
1 Audio output channel display
3 Audio level meter display
It displays the setting status of the AUDIO OUTPUT
switch on the front panel.
Top (CH 1 /3 AUDIO OUT): CH 1, CH 3, CH 1 /3
Bottom (CH 2 /4 AUDIO OUT): CH 2, CH 4, CH 2 /4
It displays the input sound level during recording or in
the STOP mode, and the playback sound level during
playback.
The reference recording level of BR-DV6000 is –20dB.
Audio sampling frequency display
2
• For playing a tape recorded with a home-use DV ma-
chine with a reference level of –12 dB, set AUDIO OUT
LEVEL to –12 dB.
• During recording, it displays the setting status of AU-
DIO MODE of the AUDIO Menu screen.(48k or 32k)
• During playback, the audio mode of the tape is dis-
played (48k, 32k, or 44.1k)
• L: Displayed during AUDIO LOCK.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-26
4 Drop/Non-drop display (for NTSC only) /NTSC mode
0 Tape symbol display
Displays the framing mode of the time code.
NDF : Non-drop frame (NTSC only)
: This symbol is displayed when a cassette tape is
loaded.
DF
: Drop frame (NTSC only)
It blinks during loading or ejecting of a cassette
tape.
If the rear switch of the cassette tape is set to
SAVE, it is displayed in yellow.
NTSC : Displays when PB/DV IN in the SYSTEM (2/2)
Menu screen is set to NTSC.
5 Time code mode display
! Remaining tape time display
Displays the time code mode set in the TC/UB/CLOCK
Menu screen.
REGN : Regeneration mode
RRUN : REC RUN preset mode
FREE : FREE RUN preset mode
EXT : This is displayed when time codes are input to
the TIME CODE IN terminal (with TCG
SOURCE set to EXTERNAL).
Displays the remaining time (minutes). Blinks if the re-
maining time is less than 4 minutes.
Not displayed when the remaining time is being con-
firmed. SP will not be displayed when a DVCAM cas-
sette tape is being played back.
@ Time/Date display
The data of the built-in clock will be displayed during re-
cording or in the STOP mode. Displays the data of the
tape during playback.
It blinks when no time code is input or when the
phase of an external time code is not locked
with the phase of the video signal.
If the date/time is not set up, “– – –” is displayed.
DUPL : This is displayed when TC DUPLICATE is set
to AUTO.
# Input video signal display
(Enter the time code of the DV terminal.)
Displays the input video signal selected with the INPUT
SELECT switch on the front panel.
Blinks if the selected signal is not input (LINE,Y/C, CPNT,
or DV).
6 Counter mode
The counter mode selected with the COUNTER switch
on the front panel is displayed.
LINE Y/C CPNT DV
C
(
,
,
,
)
: CTL counter
: Time code
T
T
L
C
In the case of a copy-prohibiting signal, it will be dis-
played in yellow.
B : User’s bit
U
SYNC
: It is displayed when signals are input via the SYNC
IN terminal with EXTERNAL SYNC selected.
7 Counter display
•
The CTL counter is displayed as a 7-digit number with + or –.
The time code/user’s bit is displayed as an 8-digit number.
With NTSC, the character/symbol at the end varies depending
on the time code framing mode.
$ Editing mode display
The editing mode selected with the editing remote con-
troller is displayed.
•
(ASSEM, INSV, INSA, INSVA, INS TC, INS VA12, INS
VA34, INS A12, INS A34)
F
: Non-drop frame.
.(dot): Drop frame.
With PAL, this is fixed to F.
% Timer display
8 VCR mode display
r : It is displayed when the TIMER switch on the rear
panel is set to REC or PLAY.
Displays the operation mode of the VCR.
REC: RED
PLAY: GREEN
The reservation of mode is displayed in blinking light.
NOCAS (no cassette tape), EJECT, STBON (standby-
on), STBOF (standby-off), PLAY, STILL, FF, REW, SHTL,
ADUBP (audio dubbing pause), REC, RECP (recording
pause), INSERT, ASSEM, OPOFF (operate off)
^ Wide screen ID signal display
: It will be displayed when a wide screen ID signal
exists in the input signal of theY/C or DV terminal.
The data on the tape is displayed during playback.
W
9 VCR mode graphic display
& Condensation display
c
L
:
J
: Eject
: It is displayed when condensation occurs.
: Stop
: Play
* Option display
: Still
It is displayed when an option board is connected.
XLI : SA-X61U connection
Z
+
a
: FF/Forward search
: REW/ Reverse search:
: Record
XLO
: SA-X62U connection
: SA-DV6000 connection
e
aJ : Recording pause
: Audio dubbing
J : Audio dubbing pause
Download from Www.Somanuals.com. All Manuals Search And Download.
E-27
CONNECTION
– Connecting video signals –
Video output, e.g., VCR
Synchronization signal generator
BB signal
Input
Composite
Y/C
DV
Component
COMPONENT
VIDEO
LINE
REMOTE2
Y/C
IN
IN
R-Y
B-Y
Y
AUDIO
CH 1/3 CH 2/4
OUT
OUT
IN
SYNC IN
Monitor
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
DC12V
REMOTE1
GND
Y/C
DV
MONITOR OUT (Composite)
Composite
Component
Output
Video output, e.g., VCR
Ⅵ Input signal
Ⅵ Output signal
The input video signal is selected with the IN-
PUT SELECT switch on the front panel. Set
VIDEO INPUT SEL in the VIDEO Menu screen
to select YC input or component input.
● Analog signal
When BR-DV6000 enters the STOP, REC or
EDIT mode, the input signal (E-E image) is out-
put.In the PLAYBACK mode (including the play-
back of the pre-roll part during editing), play-
back images are output.
However, in the edit mode with analog input,
signals cannot be output to the DV OUT termi-
nal properly.
• LINE IN terminal (BNC): composite signal
• Y/C IN terminal (4-PIN):YC separate signal
When a wide screen ID signal is being input,
the ID signal is recorded.
● Analog signal
• COMPONENT IN terminal (BNC
ן 3): The component (Y/B-Y/R-Y) signal.
● Digital signal
• LINE OUT terminal (BNC):composite signal.
• Y/C OUT terminal (4-PIN):YC separate sig-
nal.
When a wide screen ID signal exists in the
video signal, the ID signal is output.
• COMPONENT OUT terminal (BNC
ן 3): Component (Y/B-Y/R-Y) signals are output.
● Digital signal
• DV IN/OUT terminal : IEEE1394-compliant
digital video signals
are input.
When a wide screen ID signal is being input,
the ID signal is recorded.
Set PB/DV IN in the SYSTEM (2/2) Menu
screen according to the signal format to be
input to the DV terminal. (NTSC or PAL).
• DV IN/OUT terminal: it outputs IEEE1394-
compliant digital video signals.
When a wide screen ID signal exists in the
video signal, the ID signal is output.
● Connection with a monitor TV
A monitor TV can be connected to the MONI-
TOR OUT terminal. Besides the composite
video signals, it also displays the on-screen dis-
play for status or menu screen.
Memo
Whether or not to enable SET UP for analog
I/O signals of signals can be selected with SET
UP in theVIDEO Menu screen (for NTSC only).
Memo
Set PB/DV IN in the SYSTEM (2/2) Menu
screen according to the signal format of the
tape to be played. (NTSC or PAL)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-28
Memo
Caution on video signals
● During DV signal recording, the status of
synchronization signals will be as shown be-
low regardless of the SYNC SELECT menu
settings.
● If search images or video signals with a high
level of jitter are input, images or sound may
be distorted temporarily. Thus, input stable
signals, e.g., those having gone through a
TBC.
SYNC IN terminal
signal
Synchronization signals
● A digital VCR requires that video signals for
recording be delivered from a stable source.
Video signals from an analog VCR must be
run through a TBS or TBC.
● When a component output is executed for
composite-input video, discoloration may oc-
cur on the left side of the screen. It is not a
defect.
Input
No input
EXT
DV
● Regardless of the setting of SYNC SELECT,
when a tape recorded in NTSC is played
back, synchronization signals are as shown
below.
SYNC IN terminal
NTSC signal input
PAL signal input or
No signal input
Synchronization signals
Ⅵ Synchronization signal
EXT
INT
In order to enhance the level of edit precision,
input synchronization signals to all the devices
of the editing system during editing.
For BR-DV6000, input external synchronization
signals into the SYNC IN terminal. For external
synchronization signals, use video signals of 1V
(p-p) or lower (e.g., black burst signals).
Caution on synchronization signals
● For external synchronization signals, output-
signal phase adjustments cannot be per-
formed.In addition, the sub carrier cannot be
locked.
To edit DV signals, synchronization signal in-
put is required.
● Plugging and unplugging of external synchro-
nization signals or video input signals during
playback causes distortion of images and
sound for about 5 seconds.
Types of synchronization signal:
BR-DV6000 is operated based on one of the
following 3 types of synchronization signal.
• Synchronization signals produced by the syn-
chronization signal generator inside theVCR
(INT)
• Video signals from the video signal input ter-
minal (VIDEO)
• Synchronization signals from the SYNC IN
terminal (EXT)
Selection of synchronization signals:
Synchronization signals should be selected de-
pending on whether external synchronization
input (SYNC IN) or video input (VIDEO IN) ex-
ists or on the SYNC SELECT Menu settings.
Synchronization signals are selected as shown
in the following table.
SYNC IN
VIDEO IN
No Yes No Yes
No No Yes Yes
INT EXT INT EXT
INT INT VIDEO VIDEO
INT EXT VIDEO EXT
INT INT VIDEO VIDEO
Playback
EXTERNAL❈
Record
Playback
Record
AUTO❈
❈
The above can be selected with SYNC
SELECT in the SYSTEM Menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-29
CONNECTION
– Connecting audio signals –
Audio output of VCR
Input
Analog audio
(2 channels)
Slot cover for optional board
DV
Microphone
Headphone
COMPONENT
VIDEO
REMOTE2
Monaural
Stereo
LINE
IN
Y/C
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
Monitor
MONITOR OUT analog (monaural)
Analog audio (2 channels)
Output
DV
Audio input of VCR
Ⅵ Output signal
AUDIO OUTPUT switches and output
channels
When BR-DV6000 is in the STOP, REC or EDIT
mode, signals (EE sound), which have been
input, are output.
During the PLAYBACK mode (including the
playback of the pre-roll part during editing), the
playback sound is output.
However, in the edit mode with analog input,
signals cannot be output to the DV OUT termi-
nal properly.
In the following cases, the channels that receive
output from the AUDIO OUTPUT terminal vary
according to the setting of the AUDIO OUTPUT
switch. The table below shows the channels.
• During playback of tapes recorded in the 32kHz
audio mode.
• During audio dubbing.
• In the EE mode of DV input in the 32kHz audio
mode.
● Analog signal
CH 1/3, CH 2/4 AUDIO terminal (RCA
ן 2). There are analog audio terminals for 2 chan-
nels.
AUDIO OUT terminal
AUDIO
For the DV format, tracks are available for 4
channels (in the 32kHz audio mode).
• In the 32kHz mode, from which one of the 4
channels sound is output can be selected with
the AUDIO OUTPUT switch on the front
panel. (Refer to the table on the right.)
● Headphone terminal
OUTPUT
switch
CH1/3
(L)
CH2/4
(R)
CH1/2
MIX
CH1
CH2
CH1/3
CH3
CH2/4
CH4
CH3/4
Sound can be checked in stereo using a
headphone. The volume can be adjusted with
the PHONES switch on the front panel.
• The channel to be output from this terminal
in the 32kHz audio mode can be selected
with the AUDIO OUTPUT switch. (Refer to
the table on the right.)
• In the 48kHz audio mode or during normal re-
cording, output goes to CH1 and CH2 regard-
less of the setting of the switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-30
● Connecting to a monitor TV
A monitor TV can be connected to the AUDIO
MONITOR OUT terminal.
Ⅵ Input signal
● Analog signal
CH 1/3 AUDIO IN terminal. (RCA
ן 2) There are analog input terminals for 2 chan-
nels.Recording cannot be performed to 4 chan-
nels at the same time. Sound from each termi-
nal is usually recorded to CH1 and CH2.
To record to CH 3 and CH 4, set AUDIO MODE
of the AUDIO Menu screen to 32 k and record
it in the audio-dubbing mode. (☞ Page 44)
● Microphone input terminal
The sound output from the AUDIO MONITOR
OUT terminal is monaural.
• The volume is adjusted through the monitor
TV.
• The output channel can be selected with the
AUDIO MONITOR switch on the front panel
(Refer to the following table).
AUDIO MONITOR switches and output
channels of AUDIO OUTPUT/PHONES
This terminal is for connecting to a monaural
microphone. The same sound is recorded on
the 2 channels.
In the following cases, the output channels from
the AUDIO MONITOR OUTPUT/PHONES termi-
nal vary according to the setting of the AUDIO
MONITOR switch and the AUDIO OUTPUT switch.
The table below shows the channels.
• During playback of tapes recorded in the
32kHz audio mode.
Memo
● To record sound on the AUDIO IN terminal
and MIC terminal, set the INPUT SELECT
switch on the front panel to “LINE” or “Y/C
(CPN)”.
• During audio dubbing.
• In the EE mode of DV input in the 32 kHz
audio mode.
● If the AUDIO IN terminal and MIC terminal
are used at the same time, the MIC terminal
precedes.
AUDIO switch
MONITOR OUT/
PHONES terminal
● Digital input
IEEE1394-compliant digital signals are input
into the DV IN/OUT terminal.
• To enable audio input into this terminal, set
the INPUT SELECT switch to DV.
• The AUDIO MODE (48 K or 32 K) will be one
of input signals.
MONITOR
OUTPUT
CH1/2
MIX
CH1
L
CH1/3
CH3
CH3/4
CH1/2
MIX
CH1/2
CH1/2/3/4
CH3/4
CH2
• During digital signal input, the recording level
cannot be adjusted.
MIX
R
CH3/4
CH1/2
MIX
Memo
CH2/4
CH4
● An input/output board (sold separately) of the
XLR connector can be installed in the optional
slot.
CH3/4
• In the 48kHz audio mode or during normal
recording, it outputs to CH1/2 channel (the
OUTPUT switch listed in the above table
shows the setting of CH1/2).
• When MIX is selected, the PHONES termi-
nal outputs stereo sound.
SA-X61U AUDIO XLR IN board
SA-X62U AUDIO XLR OUT board
These boards cannot be installed at the same
time.
● For BR-DV600 player, when the mode is
changed from STILL to PLAY, sound will be
muted for a while shortly after the audio out-
put. Thereafter, it will resume as per normal.
● Digital output
IEEE1394-compliant digital signals are output
from the DV IN/OUT terminal.
(This does not occur with BR-DV600A.)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-31
CONNECTION
– Connecting to editing sytem –
BR-DV6000 is equipped with 2 remote terminals, for the JVC bus and RS-422A for editing pur-
poses.
Ⅵ When a JVC bus-compatible editing remote controller is used:
For the editing remote controller, use RM-G800.
Example: BR-DV6000 as player and recorder for cut editing of digital signals.
Monitor
Monitor
VIDEO
MONITOR
VIDEO
MONITOR
Synchronized
signal generator
SYNC IN
B.B.
AUDIO MONITOR
B.B.
AUDIO
MONITOR
SYNC IN
COMPONENT
COMPONENT
VIDEO
LINE
REMOTE2
AUDIO
VIDEO
LINE
REMOTE2
AUDIO
Y/C
Y/C
IN
IN
IN
IN
R-Y
B-Y
R-Y
B-Y
Y
Y
OUT
OUT
CH 1/3
CH 2/4
CH 1/3
CH 2/4
OUT
OUT
IN
IN
OUT
OUT
MONITOR
OUT
MONITOR
OUT
IN
OUT
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
SYNC IN
TIME CODE
IN
IN
OFF
OFF
REC
PLAY
REC
PLAY
DV
IN/OUT
DV
IN/OUT
MONITOR
OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SERIAL
REMOTE
TIMER
SIGNAL
GND
SIGNAL
GND
DC12V
REMOTE1
DC12V
REMOTE1
DV cable (video/audio)
Remote cable
REMOTE 2 (12-PIN)
DV
DV
Remote cable
REMOTE 2 (12-PIN)
Player
Recorder
EDITING CONTROL UNIT RM-G800
COUNTER TC HOLD
HOUR
MINUTE
SECOND
FRAME
LAP
MENU SET SET
LAP
IN
CTL
TC
ON
PLAYER
RECORDER
C
O
U
N
T
E
R
R
E
S
E
T
E
J
E
C
T
OUT
UB
P
R
E
S
E
T
OFF
EDIT MODE
VIDEO/Hi-Fi AUD-1
REC
REW
PLAY
STILL
FF
SEARCH
GPI
ASSEM
AUD-2
M
A
N
U
A
L
T
A
K
E
S
T
O
P
PLAYER
P
R
E
C
O
R
D
E
R
ENTRY MENU
CANCEL GOTO
R
SHIFT
P
R
E
V
I
E
W
R
E
V
I
E
W
STILL
X-1
X1
AUTO EDIT
ALL STOP
ENTRY
IN
OUT
REV
FWD
RM-G800
Note
Ⅵ Related VCRs
● VHS/S-VHS VCR
Before connecting the cables for remote ter-
minals, ensure that the power to the VCR is
turned off.
No input/output of DV signals is possible.
BR-S800 + (SA-N50)
BR-S500 (player) + (SA-N50)
Ⅵ Remote extension cable
● DV VCR
To extend the cables for the remote terminals,
use the extension cableVC-G8030U (3m) (sold
separately).
BR-DV600/A
Note
● If RM-G800 is to be used, check whether the (x)
mark is printed on the label at the bottom of the
unit.
If there is no (x) mark, modification is required.
Consult your JVC service agent.
Ⅵ DV cable
Use VC-VDV204 (2 m, 4P-4P) or VC-VDV206
(2 m, 4P-6P) (sold separately).
● For the use of RM-G800, there are certain regu-
lations regarding Electro-Magnetic Compatibil-
ity (EMC). Consult your JVC service agent.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-32
Ⅵ When an RS-422A-compatible remote controller is used:
For the editing remote controller, use RM-G820.
Example: use BR-DV6000 as player and recorder for cut editing of analog signals.
Monitor
Monitor
VIDEO
MONITOR
VIDEO
MONITOR
AUDIO
MONITOR
AUDIO
MONITOR
Video signals
Audio signals
VIDEO OUT
AUDIO OUT
VIDEO IN
Player
Recorder
AUDIO IN
COMPONENT
COMPONENT
VIDEO
REMOTE2
VIDEO
REMOTE2
LINE
IN
LINE
IN
Y/C
Y/C
IN
IN
R-Y
B-Y
R-Y
B-Y
Y
Y
AUDIO
AUDIO
OUT
OUT
CH 1/3
CH 2/4
CH 1/3
CH 2/4
OUT
OUT
IN
IN
OUT
OUT
MONITOR
OUT
MONITOR
OUT
IN
OUT
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
SYNC IN
TIME CODE
IN
IN
OFF
OFF
REC
PLAY
REC
PLAY
DV
IN/OUT
DV
IN/OUT
MONITOR
OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SERIAL
REMOTE
TIMER
SIGNAL
GND
SIGNAL
GND
DC12V
REMOTE1
DC12V
REMOTE1
B.B.
SYNC IN
Remote cable
REMOTE 1 (9-PIN)
SYNC IN
B.B.
REMOTE 1 (9-PIN)
SYNC IN
B.B.
E
D
I
T
I
N
G
C
O
N
T
R
O
L
U
O
N
U
I
T
R
M
—
G
8
2
0
L
A
P
I
N
O
U
T
S
E
R
V
O
L
A
P
Synchronized signal generator
I
N
T
S
E
R
V
O
HOUR
MIN
SEC
FRAME
E
V
E
N
T
N
o
.
I
N
FRAME
HOUR
MIN
SEC
B
U
M
P
V
.
S
P
E
E
D
O
U
T
O
N
O
F
F
A
.
S
P
L
I
T
I
N
D
U
R
A
T
I
O
N
O
U
T
P
R
P
R
E
R
O
L
L
7
5
3
V
I
T
C
V
I
T
C
L
A
P
R
E
S
E
T
L
T
C
L
T
C
L
A
P
R
E
S
ET
T
OTAL
C
T
L
C
T
L
P
L
A
Y
E
R
RECORDER
P
C
O
E
N
N
T
I
N
U
E
S
T
A
A
R
R
T
E
N
D
V
.
S
P
E
E
D
EVENT
E
J
E
C
T
EJECT
A
U
X
M
U
L
E
N
M
A
N
.
T
A
K
E
R
I
P
P
L
E
RENUMBER
S
PLIT
R
E
C
R
E
W
F
F
S
T
O
P
A
S
S
E
M
V
I
D
E
O
A
U
D
-
1
A
U
D
-
2
R
E
C
R
E
W
F
F
STOP
S
T
B
O
F
F
T
C
S
T
B
OFF
S
P
L
I
T
C
A
N
C
E
L
–
+
L
A
E
S
D
T
REC
P
L
A
Y
P
A
US
E
S
E
A
R
C
H
P
L
A
Y
P
A
U
S
E
S
E
A
RCH
E
E
/
STILL
/
STIL
L
I
N
O
U
T
E
N
T
R
Y
I
N
OUT
STILL
STILL
X-1
X1
X-1
X1
MAX
MAX
AUTO EDIT
PREVIEW
GOTO
REVIEW
SHIFT
ALL STOP
MIN
MIN
REV
REV
FWD
FWD
MONITOR
MONITOR
P
L
A
Y
E
R
R
E
C
O
R
D
E
R
RM-G820
Ⅵ To fasten the connector of the remote
cable to the REMOTE 1 terminal, use a
screw of the metric, not inch, system.
Ⅵ Related VCRs
● VHS/S-VHS VCR
BR-S800 (equipped with SA-K26, SA-R50,
SA-N50)
BR-S822 (equipped with SA-T22)
* No input/output of DV signals is possible.
Ⅵ In order to enhance the level of editing
precision, input synchronization sig-
nals (black burst signals) to all devices.
(☞ Page 29)
● D-9 (digital S) VCR
BR-D80, BR-D85, BR-D750
(Only analog signals)
When BR-DV3000 is to be used as the player,
input as synchronization signals the composite
signals or theY signals of theYC signals of BR-
DV3000 to the SYNC IN terminal of BR-DV6000.
● DV VCR
BR-DV3000 (player only)
BR-DV600/A (player only)
For information on settings and other points on the operation of BR-DV6000 with
an editing system, refer to pages 64 – 68.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-33
CONNECTION
– Connection with serial remote terminals –
The following describes examples of serial remote terminal connection.
To use the serial remote terminals, set REMOTE SEL SER of the REMOTE (1/2) Menu screen
to “ON” or “LOC+REM.” (☞ Page 75)
Ⅵ Operate BR-DV6000 with the wired remote controller RM-G30 (sold separately)
Connect the wired remote controller RM-G30 to
COMPONENT
VIDEO
REMOTE2
LINE
Y/C
the SERIAL REMOTE IN terminal.
IN
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
The commands of the SERIAL REMOTE IN termi-
nal is through-output from the SERIAL REMOTE
OUT terminal. (Only with OPERATE ON)
Multiple VCRs can be operated with RM-G30 by
series connection of the SERIAL REMOTE IN/OUT
terminals.
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
SERIAL OUT
SERIAL IN
Through-output
RM-G30
Ⅵ Start/stop recording with an external switch, e.g., a foot switch.
COMPONENT
Connect an external switch, e.g., a foot switch, to
VIDEO
REMOTE2
LINE
Y/C
IN
IN
R-Y
B-Y
the SERIAL REMOTE IN terminal.
The format of the input signals can be selected
with FOOT SW in the REMOTE (2/2) Menu screen.
(☞ Page 46)
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
SERIAL IN
SERIAL OUT
Through-output
Foot
switch
Ⅵ Dubbing of playback images or sound with other machines using the SERIAL RE-
MOTE OUT terminal.
When BR-DV6000 is in the playback mode, the REC command can be output from the SERIAL
REMOTE OUT terminal (REPLICATION function). With this function, a tape loaded in BR-DV6000
can be dubbed on another unit. For details, refer to ☞ Page 57.
BR-DV6000 can be used as a master or dubbing unit.
● Dubbing with 1 VCR.
(Master unit) BR-DV6000
(Dubbing unit) VCR
Memo
COMPONENT
VIDEO
REMOTE2
LINE
with a SERIAL terminal
Y/C
IN
IN
R-Y
B-Y
Video
If REPLICATION of the SYSTEM
(2/2) Menu screen is set to DV, the
REC command is output from the
DV terminal.
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
Sound
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
SERIAL
terminal
REC command
SERIAL OUT
● Dubbing with multiple VCRs (Up to 50 VCRs can be controlled comprehensively.)
(Master unit) BR-DV6000
Signal distributor
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
Video
Sound
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
SERIAL
SERIAL
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
IN
OUT
Dubbing unit: VCR with SERIAL IN and OUT terminals
DV: BR-DV6000
IN
SERIAL OUT
❈
Download from Www.Somanuals.com. All Manuals Search And Download.
E-34
CONNECTION
– Connecting the AC adapter –
Connect the supplied AC adaptor to BR-DV6000.
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
Screw
IN
OUT
Clamp
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
Supplied AC adaptor
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
Supplied power
cord
DC IN
terminal
DC cord
TIMER switch
Ⅵ Before connecting the AC adaptor, en-
sure that the TIMER switch is set to
“OFF”. (Refer to “Notes” below.)
OPERATE indicator
OPERATE button
OPERATE
1. Connect the DC cord of the AC adapter to
the DC IN terminal of BR-DV6000.
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
ONAL
REW
2. To prevent accidental disconnection of the
DC cord, fasten the DC cord with a clamp.
1Remove the screw and the clamp shown in
the above figure.
AUDIO
INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
DV6000
LOCAL
(CPN)
2Insert the DC cord into the clamp and fasten
the clamp unto the unit.
Memo
3. Connect the supplied power cord to the AC
IN terminal of the AC adapter.
● Even in the OPERATE OFF mode, a small
amount of electricity will still flow into the unit.
4. Connect the power cord to the power outlet.
• BR-DV6000 is turned on and the OPERATE
indicator lights up in red.
● When the unit is in the OPERATE OFF mode,
no operation can be performed except that
of the OPERATE buttons and cassette load-
ing/ejecting.
(OPERATE OFF mode)
• If DC IN MODE of the SYSTEM (2/2) Menu
screen is set to “OPE ON”, the OPERATE in-
dicator will light up in green.
(OPERATE ON mode)
Notes
• Supply power to BR-DV6000 using the supplied AC adapter. Do
not use other power sources.
• Do not unplug the DC cord and/or the power cord during recording
or playback.
• If the supply voltage is low, an alarm display of “LOW VOLTAGE” is
shown.
• If the TIMER switch is set to REC or PLAY, recording or playback
begins when power is supplied to the DC IN terminal.
LOW VOLTAGE
Alarm message
When the AC adapter is connected, ensure in particular that the
TIMER switch is not set to REC.
Set the TIMER switch to REC or PLAY only when an external timer
function is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-35
PREPARATION
– Turning on/off the power –
Turning on the power
OPERATE indicator
Ⅵ Press the OPERATE button when BR-
DV6000 is in the OPERATE OFF mode
(with the OPERATE indicator lit up in
red)
OPERATE
button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
• The power is turned on and the OPERATE
indicator lights up in green. BR-DV6000 is
ready for operation. (OPERATE ON mode)
REW
STOP
BLANK
AUDIO
INPUT
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
Memo
● In the OPERATE OFF mode, if a cassette
tape is inserted, the power is turned on and
BR-DV6000 goes into the OPERATE ON
mode.
● Whether BR-DV6000 goes into the OPER-
ATE ON or OFF mode when the power is sup-
plied to the DC IN terminal can be selected
with DC IN MODE in the SYSTEM (2/2) Menu
screen.
Note
After the OPERATE button is pressed and BR-
DV6000 is turned on, if the green indicator
blinks or the monitor or the LCD displays “UN-
PLUG MAIN POWER, PLUG BACK IN AFTER
A WHILE”, unplug the power cord from the
power outlet, leave it for a while before turning
on the power again.
● If TIMER REC or TIMER PLAY is selected,
BR-DV6000 starts up in the OPERATE ON
mode regardless of the DC IN MODE Menu
settings. If a cassette tape is loaded, BR-
DV6000 starts recording or playback.
Turning off the power
Ⅵ Turn off BR-DV6000
1.Press the OPERATE button.
• BR-DV6000 enters the OPERATE OFF mode and the OPERATE indicator lights up in red.
2.If BR-DV6000 is not to be used for a long period of time, unplug the AC adapter.
To unplug the AC adapter, remove the power cord from the power outlet first.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-36
PREPARATION
– Operation method (main unit/
remote controller) and operation lock mode –
Selecting the operating method (main unit/remote controller)
Whether to operate BR-DV6000 with its buttons or the remote
controller can be selected with the REMOTE/LOCAL switch.
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
PROFESSIONAL
Ⅵ Setting the REMOTE/LOCAL switch
REW
• To operate with the buttons of BR-DV6000, set it to “LOCAL”.
• To operate BR-DV6000 with RS-422A or JVC-bus editing re-
mote controller that is connected to the REMOTE 1 (9-PIN) or
REMOTE 2 (12-PIN) terminal, set it to “REMOTE”.
AUDIO
INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
BR-DV6000
LOCAL
(CPN)
REMOTE (1/2) Menu screen
Memo
———R EMO T E
[
1
/
2
]
———
With the REMOTE/LOCAL switch set to REMOTE, the JVC bus
or RS-422A can be enabled using REMOTE SEL JVC or RE-
MOTE SEL 9P in the REMOTE (1/2) Menu screen.
R EMO T E S E L 9 P
ON
R EMO T E S E L S E R
R EMO T E S E L D V
R EMO T E S E L J V C
R EMO T E S E L N E T
L OC A L F U N C T I ON
P R E RO L L
ON
ON
ON
ON
S T P + E J T
7 S E C
• The setting position of the REMOTE switch for operating BR-
DV6000 with the SERIAL REMOTE terminal can be selected
using REMOTE SEL SER in the REMOTE (1/2) Menu screen.
• The setting position of the REMOTE switch for operating BR-
DV6000 with the DV terminal can be selected at REMOTE SEL
DV in the REMOTE (1/2) Menu screen.
N E X T P A G E
P A G E B A C K
Memo
[☞ Page 75 “REMOTE (1/2) Menu screen”]
If the REMOTE/LOCAL
switch is set to REMOTE,
the buttons that can be op-
erated by the main unit can
be selected with LOCAL
FUNCTION.
OPERATION LOCK mode
BR-DV6000 comes with an operation lock function to prevent unauthorized or incorrect operation.
In the OPERATION LOCK mode, the operation buttons and slide switches of BR-DV6000 are
disabled. However, the OPERATE ON and MENU operations are effective.
The AUDIO MONITOR switch, TIMER switch, PHONES volume and REC LEVEL volume are al-
ways effective.
SYSTEM (2/2) Menu screen
Ⅵ Turning on the OPERATION LOCK mode
–
–
–
S
Y
S
T
E M
[
2
/
2
]
–
–
–
–
–
–
Set OPERATION LOCK in the SYSTEM (2/2) Menu screen to ON.
• If the operation button of BR-DV6000 is pressed while BR-
DV6000 is in the OPERATION LOCK mode, “OPERATION
LOCK” is displayed on the monitor or the LCD for about 3 sec-
onds.
D C
I
N
X
I
M O D E
O P
E
O F
X
F
I
N D E
W R
I
I
T
E
I
N D E
R E
R E
P
P
L
L
C A
C A
I
I
T
T
O N
L
O F
O F
O N
F
F
I
E
D E
L
A
Y
O P E R A
T
O N
N
O C K
P
F
B
/
D V
P
A
L
A C T O R Y
S
E
T
T
I
T
N G
E R
C A N C E
L
0
D R U M H O U R M E
0
0
0
0
0
P
A G E
B
A C K
Ⅵ Turning off the OPERATION LOCK mode
Set OPERATION LOCK in the SYSTEM (2/2) Menu screen to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-37
PREPARATION
– Loading/Ejecting cassette –
Use standard DV cassette tapes or mini DV cassette tapes.
Guide
Eject button
Cassette LED
OPERATE
PLAY
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
DISP
SET
REW
STOP
FF
REW
STOP
MIC
MIC
BLANK
BLANK
AUDIO
INPUT
AUDIO
INPUT
PHONES
REC LEVEL
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
LINE
Y/C
Y/C
CH-1/3
CH-2/4
CH-1/3
CH-2/4
LOCAL
LOCAL
(CPN)
(CPN)
Mini DV tape
Standard DV tape
Switch
Loading the cassette tape
1. Check the cassette tape.
REC
• Setting the rear switch.
SAVE
Push it to “REC” for recording
To prevent its contents from being erased accidentally, push it to
“SAVE”.
• Ensure that the tape is not loosened.
2. Ensure that no cassette tape is loaded.
With no cassette tape loaded, the cassette LED is off.
When no cassette tape is loaded, the status display for the VCR
operation mode shows “NO CASSETTE” on the monitor or the
LCD.
3 2 K C H – 1
/
2
S P 0 0 0 m i
n
3. Load the cassette tape.
• Insert a standard DV cassette tape into the tape-loading slot.
• For a mini DV cassette tape, load it in between the left and right
guides.
Set the tape window face up and push the cassette tape in slowly
until it is drawn in automatically.
➞When the cassette tape is loaded, the status display indicates
“STANDBY-ON”.
0 3
1 1
/
:
0 4
2 0
/
:
0 3
0 0
NO C A S S E T T E
T C R 0 2 0 0 0 0 0 0
:
:
:
VCR mode status display
❈
If the STANDBY-ON mode is left as is, it goes into the STANDBY-
OFF mode.
In the STANDBY-OFF mode, press the STOP button to return to
the STANDBY-ON mode.
Memo
● The cassette tape can be
loaded/ejected even
when BR-DV6000 is in
the OPERATE OFF
mode.
Ejecting the cassette tape
1. Press the EJECT button of BR-DV6000.
➞While the cassette tape is being ejected, the status display flashes
“EJECT”.
● The loading/ejecting ac-
tion of the cassette tape
takes about 6 seconds.
2. Remove the cassette tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-38
PREPARATION
– Setting the LCD display –
Ⅵ Selecting the LCD status display
DISP button
The contents of the status display for the LCD are selected with
the DISP button located on the front panel.
When the DISP button is pressed, the status display changes in
the following sequence.
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
A.DUB
EJECT
Mini
DISP
SET
PROFESSIONAL
Enlarged
character display
Image/enlarged
character display
MIC
BLANK
PHONES
REC LEVEL
COUNTER
M
CTL
TC
UB
MI
No
display
Image
display
Image/
character display
CH-1/3
CH-2/4
BR-DV6000
LCD
(☞ Page 20 “On-screen display”)
(☞ Page 26 “LCD display”)
Ⅵ The LCD settings are performed in the DISPLAY (1/2)
Menu display.
● Adjusting the LCD display
DISPLAY (2/2) Menu screen
• Brightness : With LCD BRIGHTNESS
• Color depth : With LCD CHROMA.
–
–
–
I
D
I
S
T
P
L
A
S
Y
S
[
1
/
2
]
–
–
–
L
L
L
L
C D B R
G H
N E
0
0
0
O F
O N
L
• Contrast
: With LCD CONTRAST.
C D C H R O M A
C D C O N R A
T
S
T
F
Each of the above can be set up in 11 levels.
● Setting the display time of the LCD display
If the LCD display is not to be used for a long time, LCD AUTO
OFF can be selected to set the time for the LCD to go off automati-
cally.
C D A U T O O F
F
D
I
S
P
L
T
A
Y
C O U N
N E
A G E
E R P O S
I
.
O W E R
-
R
X
T
P
B
A G E
A C K
P
OFF
: Does not turn off automatically.
30MIN
1HOUR
2HOUR
: Turns off automatically after 30 minutes.
: Turns off automatically after 1 hour.
: Turns off automatically after 2 hours.
Memo
● During recording or playback, the LCD display stays on regard-
less of the LCD AUTO OFF setting.
● After the LCD display was turned off automatically, press any
button to restore the original display.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-39
PREPARATION
– Setting/Displaying date and time –
This function sets up the date and time of the built-in clock.With the built-in chargeable battery, the
date and time data that have been set are maintained even after the main power is turned off.The
set date and time data are displayed on the monitor or the LCD display according to the settings in
the Menu screen. Set DATE REC in the TC/UB/CLOCK (2/2) screen to ON if the date/time display
is to be recorded on the tape as video signals. With DV signal input, date/time data are not re-
corded. (☞ Page 42 “Setting date/time recording”)
8 button
: button
OPERATE button
MENU button
OPERATE
SET button
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
Mini
MENU
RESET
DISP
SET
PROFESSIONAL
SEARCH–
SEARCH+
; button
REW
MIC
BLANK
CUE UP
HOLD
9 button
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
Setting date and time
The date and time are set up at the CLOCK ADJUST Menu screen.
The CLOCK ADJUST Menu screen is found under the TC/UB/CLOCK (2/2) Menu.
Setting can be performed while checking the information shown on the monitor connected to the
VIDEO MONITOR OUT terminal.
TC/UB/CLOCK (2/2) Menu screen
Ⅵ Press the OPERATE button to turn on the power and
–
–
–
T
T
(
C
P
/
U B
/
C
L
O C K
(
2
–
/
2 )– –
–
set it to the STOP mode.
U
-
B
T
I
E
A
L
)
–
O F
–
F
D A
R E C
1.Press the MENU button to display the TOP MENU screen.
C
P
L
O C K A D
J
U S
T
.
.
A G E
B
A C K
2.Displaying the CLOCK ADJUST Menu.
1 Press the 8 or 9 button to bring the cursor to the desired TC/
UB/CLOCK item. Press SET or the : button.
2 Press the 8 or 9 button to bring the cursor to the NEXT PAGE
item in the TC/UB/CLOCK (1/2) Menu screen. Press SET or the
: button.
Cursor
CLOCK ADJUST Menu screen
3 Press the 8 or 9 button to bring the cursor to the CLOCK AD-
JUST item in the TC/UB/CLOCK (2/2) Menu screen. Press SET
or the : button.
Date (DD/MM/YY)
–
–
–
C
L
O C K A D
J
U S
T
0
0
–
3
0
–
/
:
–
0
0
D A
T
E
4
0
/
:
0
0
3
0
T
P
I
M E
3.Setting the date and time in the CLOCK ADJUST Menu screen.
1 Press the 8 or 9 button to bring the cursor to the date or time
item. Press SET or the : button.
A G E
B
A C K
Time (Hour, minute)
2 Press the : or ; button to select the digit for setting.
The selected digit starts blinking.
3 Press the 8 or 9 to set the value.
4 Repeat step 1 - 3. After completing the required setting, press
the SET button.
–
–
–
C
L
O C K A D
J
U S
T
0
1
–
3
2
–
/
:
–
0
0
D A
T
E
4
0
/
:
0
3
T
P
I
M E
A G E
B
A C K
Download from Www.Somanuals.com. All Manuals Search And Download.
E-40
Memo
The seconds for the time cannot be set up. After the minute is set
up, press the SET button in synchronization with the time signal.
4.Returning to the TOP MENU from TC/UB/CLOCK after com-
–
–
–
C
L
O C K A D
J
U S
T
0
1
–
3
2
–
/
:
–
0
0
D A
T
E
4
0
/
0
3
pleting all settings
T
P
I
M E
A G E
B
A C K
• Press the ; button.
Or
Press the 8 or 9 button to bring the cursor to PAGE BACK and
press the SET button.
5.Returning to the usual menu
• Press the MENU button
Or
Bring the cursor to EXIT of the TOP MENU and press the SET
button.
Selecting date/time display
The date and time data can be displayed on the monitor or LCD on-screen display (status display).
Setup can be performed at the DISPLAY (2/2) Menu screen to turn on/off the date/time display and
select the display style. (For setting procedure: ☞ Page 70)
Ⅵ DISPLAY (2/2) Menu screen
DISPLAY (2/2) Menu screen
● TIME DATE : For enabling/disabling the display of date and
–
–
–
D
I
S
P
L
A
Y
[
2
/
2
]
–
–
–
T
V
T
T
I
T
A
I
M E C O D E
O N
O N
O N
D A
O N
O N
D D
time on the status display
R
P
M O D E
E
M E
R E M A
I
N
.
OFF
TIME
DATE
: Does not display date/time.
: Displays time only.
: Displays date only.
/
O
D A
I
I
S
S
B
T
N
E
F O
T
/
E
+
T M
A U D
I
E D
D A
T
P
I
T
E
N
T
T
F O
.
E
E
T
M E
Y
Y
L
L
.
.
M M
/
Y
Y
I
2
4
H O U R
A G E
A C K
DATE+ TM : Displays both the time and date.
● DATE STYLE: For selecting the date display style
YY/MM/DD : Year / month / day
MM/DD/YY : Month / day / year
DD/MM/YY : day / month / year
● TIME STYLE: For selecting the time display style
24H
12H
: 24-hour time mode
: 12-hour time mode
These setting items are also reflected in the date/time record (DATE
REC function).
On-screen status display
Set DISPLAY to ON or AUTO in the DISPLAY (1/2) Menu screen.
On-screen status display
Memo
3 2 K C H – 1
/
2
S P 0 0 0 m i
n
● In the RECORDING or STOP mode : Displays the time of the
built-in clock.
● In the Playback mode
: The date and time re-
corded on the tape are
displayed.
● In the DV recording mode
: The date and time from
the DV terminal are dis-
played.
0 3
1 2
/
:
0 4
0 0
/
:
0 3
0 0
S T A N D B Y - O F F
T C R 0 2 0 0 0 0 0 0
:
:
:
Date/time display
Download from Www.Somanuals.com. All Manuals Search And Download.
E-41
RECORDING
– Setting –
Ⅵ
Settings of the AUDIO menu (
☞
Page 78)
● AUDIO MODE
OPERATE
PLAY
This is for selecting the audio sampling fre-
quency for recording.
32 K: Recording in the 32 kHz mode. Select
32 K when performing audio dubbing on
CH3 and CH4.
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
48 K: Recording in the 48 kHz mode.Audio dub-
bing is not available.
● AUDIO INPUT SEL (Displayed only when
an optional board is installed)
INPUT SELECT switch
This setting is required with XLR IN board SA-
X61U (sold separately) installed. Set this item
to XLR for selecting the audio input terminal of
the XLR IN board.
Ⅵ Selecting input signal
Select the signal with the INPUT SELECT switch
located on the front panel.
DV
: For inputting DV signals (video and
audio)
Ⅵ Setting the SYSTEM Menu (☞ Page 73)
● LONG PAUSE TIME
LINE
: For inputting composite video and
analog sound signals
This is for setting the time for BR-DV6000 to
enter the tape protection mode if there is a long
recording pause.
Y/C (CPN) : For inputting Y/C separate signals
or component signals for video.The
type of signal to input can be se-
lected with VIDEO INPUT SEL of
the VIDEO Menu.
● INDEX WRITE: SYSTEM (2/2) Menu
This is for selecting whether to record index sig-
nals automatically when recording starts.
● PB/DV IN: SYSTEM (2/2) Menu
For recording PAL signals, set this item to PAL.
For recording NTSC signals from the DV termi-
nal, set this item to NTSC.
For sound, analog signals are in-
put.
Memo
Ⅵ Setting the time code recording for DV
signal input
● For analog audio signals, if the AUDIO
INterminal and MIC terminal are used at the
same time, the MIC terminal precedes.
Select data from the built-in time code genera-
tor or from the DV terminal withTC DUPLICATE
in the TC/UB/CLOCK (1/2) Menu screen.
(☞ Page 80)
● Audio signals are recorded on CH1 and CH2.
● Analog signals cannot be recorded when PB/
DV IN is set to NTSC.
In such a case, recording is not possible.
● For DV signal input, the AUDIO MODE set-
ting cannot be performed.
It will be the same mode as that of the input
signal (48 K or 32 K).
Ⅵ Setting date/time recording
Perform setting for the following items.
• Set DATE REC in the TC/UB/CLOCK (2/2)
Menu screen to ON.
• Set DISPLAY in the DISPLAY (1/2) Menu
screen to ON.
• Set TIME/DATE in the DISPLAY (2/2) Menu
screen to any setting item except OFF.
The same data as on the date/time on-screen
display are recorded on a tape.
Ⅵ Settings the VIDEO Menu (☞ Page 79)
● SET UP (only for NTSC)
Set here according to the existence of the setup
of analog video signals (composite, YC sepa-
rate and component).If it exists, set here to ON.
If it does not, OFF.
Memo
With DV signal input, data of the built-in clock
are not recorded.
If video signals are input from the DV terminal,
the date/time data from this terminal are re-
corded regardless of the menu settings.
● BLACK BURST
Set BLACK BURST to ON to record the black
burst signals (black screen) of the built-in sig-
nal generator.
(When analog input is selected)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-42
RECORDING
– Recording procedure –
3.
REC button
3. 5.
PLAY button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
MENU
SEARCH–
HOLD
RESET
Mini
DISP
SET
PROFESSIONAL
4.
PAUSE button
SEARCH+
CUE UP
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
2.
REC LEVEL volume
6.
STOP button
Memo
1. Load the cassette tape.
● The tape protection func-
tion enables BR-DV6000
automatically to go into
the STOP mode when
there is a long recording
pause.The time to go into
the STOP mode can be
set with LONG PAUSE
TIME in the SYSTEM
(1/2) Menu screen.
• Before loading the cassette tape, please ensure that the rear
slide of the cassette tape is pushed to REC.
¥ The unit is turned on.
2.Adjust the audio recording level.
• Adjust the REC LEVEL volume. Adjust it such a way that, with
the maximum volume, the audio level meter does not display
OVER.
❈
During DV input, the REC LEVEL volume cannot be adjusted.
3. Start recording.
● When a home-use DV
VCR is used to play
tapes recorded with
BR-DV6000, the sound
level may be reduced.
• Press the PLAY button while holding down the REC button.
4. Pause recording.
• Press the PAUSE button.
5. Resume recording.
• Press the PLAY button.
6. Stop recording.
• Press the STOP button.
Recording index signals
If INDEX WRITE is set to ON in the SYSTEM (2/2) Menu screen, an index signal is recorded at the
recording starting position of the tape. In the PLAYBACK mode, the position where the index signal
is recorded can be searched. (Index search)
Memo
Ⅵ Press the REC button to record index signals during
recording
If recording is performed
right after the RECORD-
ING PAUSE mode is exited,
index signals are not re-
corded.
❈
It is not possible to record only index signals after the recording.
Allow at least an interval of 1 minute between recordings of in-
dex.
Index signals cannot be recorded with the REC button of the
❈
remote controller. Use the record button of BR-DV6000.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-43
RECORDING
– Audio dubbing –
For tapes recorded in the 32 kHz audio mode, audio dubbing can be performed on CH3 and CH4
after the recording. (After-recording)
Notes
● For tapes recorded in the 48 kHz audio mode, audio dubbing cannot be performed.
● Audio dubbing cannot be performed for DV input signals.
3.
A.DUB button
1. 5.
PLAY button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
2. 3.
PAUSE button
REW
STOP
FF
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
4.
REC LEVEL Volume knobs
6.
STOP button
Memo
:Connection:
•
During audio dubbing, if the tape comes to a
part recorded in a mode in which audio dubbing
cannot be performed (such as LP mode or 48
kHz audio mode), the VCR will enter the STOP
mode. When this happens, loud noise from the
DV output may come out. Hence, before audio-
dubbing, check the recording mode of the tape.
In the case that a microphone is connected to
the MIC terminal, MIC sound from this terminal
will be recorded. In the absence of MIC input,
signals from the CH1/3, CH2/4 AUDIO IN termi-
nal on the rear panel will be recorded.
When audio dubbing cannot be performed, an
alarm message will be displayed on the moni-
tor. (☞ Page 25)
Audio dubbing pause cannot be carried out di-
rectly in the STOP mode. Do so in the STILL
mode.
During audio dubbing pause, sound from CH3/
CH4 can be monitored, but sound output from
the DV terminal is not possible.
If audio dubbing is repeated on a short section
of the tape, momentary noise may be produced
when the section is played.
During audio dubbing, noise may be produced
on the playback video or EE sound, but the re-
cording is not affected.
The playback sound of CH1/2 cannot be re-
corded on CH3/4 (sound-on-sound).
If unrecorded parts are found during backspace
operation of audio dubbing, audio dubbing can-
not be performed.
Audio dubbing sounds are input from the AUDIO
IN terminal on the rear panel or the MIC terminal
on the front panel. MIC terminal prevails over the
AUDIO IN terminal.
:Setting:
• Set AUDIO MODE in the AUDIO Menu screen
to “32 K.”
• Do not set the INPUT SELECT switch on the
front panel to “DV.”
•
:Operation:
•
•
1.Press the PLAY button to play the tape.
2. At the position where you wish to perform
audio dubbing, press the PAUSE button.
¥ The unit enters the STILL mode.
3. Press the PAUSE button while holding down
the A.DUB button.
•
•
¥ The unit enters the AUDIO DUBBING
PAUSE mode.
4. Adjust the audio recording level.
Recording level of the sound to be audio-dubbed
can be adjusted with the REC LEVEL Volume
knobs.
•
•
5. Press the PLAY button.
¥ Audio dubbing begins. Audio signals are re-
corded on CH3 and CH4.
•
When audio dubbing is performed on tapes re-
corded on other devices, it may not record cor-
rectly. Record with BR-DV6000 before perform-
ing audio dubbing.
• To stop audio dubbing temporarily, press the
PAUSE button.
6.To end audio dubbing, press the STOP button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-44
RECORDING
– Backup recording function –
In combination with DV equipment, BR-DV6000 can perform continuous, long-hour recording.
BR-DV6000 can be set as the backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/
DV5000, etc.). When the recording tape of the source unit nears its end, BR-DV6000 can start
Backup unit: BR-DV6000
recording, enabling long-hour recording.
OPERATE
OPERATE/WARNING
LIGHT
RESET
ON
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
DISP
SET
OFF
PROFESSIONAL
MONITOR
SELECT
COUNTER
CTL
TC
UB
FILTER
1
2
3
3200k
ALARM
5600k
5600k+ND
SHUTTER STATUS
MENU
MONITOR
CH-1 AUDIO CH-2
LEVEL
A
U
T
O
I
R
I
S
FULL AUTO BLACK
LOLUX
REW
BACK
NORMAL
SPOT
L
STRETCH
NORMAL
COMPRESS
L
MIC
BLANK
DV cable
NG
POWER
ON
OFF
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
DV terminal
Y/C
DV terminal
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
:Connection:
Connect the DV terminal of the source unit to the
DV terminal of BR-DV6000 with a DV cable.
INPUT SELECT switch
REMOTE/LOCAL switch
:Operation:
:Setting up BR-DV6000:
1. Recording begins on the source unit.
Ⅵ Set the INPUT SELECT switch on the
❈
Ensure that recording starts from the begin-
front panel to “DV”.
ning of the recording tape.
Ⅵ Set the REMOTE/LOCAL switch on the
front panel to “REMOTE”.
2. BR-DV6000 begins recording when the tape
of the source unit nears its end (about 5 min-
utes before the end of the tape).
Ⅵ Set BACKUP RECTIME in the SYSTEM
(1/2) Menu screen.
• BR-DV6000 begins recording when the re-
cording time of the source unit reaches the
time set by BACKUP REC TIME.
Use the following settings according to the tape
length of the source unit.
* For DV or mini DV cassette tape:
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
OFF
: 30-minute tape
: 60-minute tape
: 80-minute tape
: 120-minute tape
: 180-minute tape
: 270-minute tape
: No backup recording
Memo
• In backup recording, BR-DV6000 records
video/sound from the source unit.
While this unit is performing backup record-
ing, continue shooting from the source unit.
• The audio mode is the one selected in the
source unit. (32 K/48 K)
• Set BACKUP REC TIME to “OFF” if the unit
is not performing backup recording.
Memo
With REPLICATION in the SYSTEM (2/2)
menu screen set to “DV”, BACKUP REC TIME
is fixed to “OFF”. For using the backup record-
ing function, set REPLICATION to “OFF” or
“SERIAL”.
Ⅵ Set the REMOTE SEL DV in the RE-
MOTE (1/2) Menu screen to ON or
LOC+REM.
Ⅵ Set TC DUPLICATE in the TC/UB/
CLOCK (1/2) Menu screen to OFF.
• It records the data of the built-in time code
generator.
• When TC DUPLICATE is set to AUTO, the
time code of the DV camcorder will stop ad-
vancing. If the DV cable is disconnected, the
time code of the backup recording will stop
advancing.
Ⅵ For using GY-DV5000 as the source unit
Set DV REC TRIGGER in the OTHERS (1/2)
Menu screen of GY-DV5000 to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-45
RECORDING
– Recording with serial remote terminals –
Recording can be turned ON/OFF with a serial remote controller or foot switch connected to the
SERIAL REMOTE IN terminal located at the rear panel of BR-DV6000.
COMPONENT
VIDEO
REMOTE2
LINE
Y/C
OPERATE
PLAY
IN
IN
R-Y
B-Y
A.DUB
EJECT
REC
PAUSE
FF
Y
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
REW
STOP
MIC
BLANK
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
IN
OFF
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
REC
PLAY
Y/C
DV
IN/OUT
CH-1/3
CH-2/4
BR-DV6000
MONITOR
OUT
LOCAL
(CPN)
TIMER
SERIAL
REMOTE
SIGNAL
GND
REMOTE1
DC12V
SERIAL IN
SERIAL OUT
REMOTE/LOCAL switch
REMOTE (1/2) Menu screen
•
•
Serial remote controller: RM-G30
Foot switch
:Connection:
———R EMO T E
[
1
/
2
]
———
R EMO T E S E L 9 P
ON
The serial remote controller (RM-G30, sold separately) can be con-
nected to the SERIAL REMOTE IN terminal located on the rear panel
of BR-DV6000.
The input signals of the SERIAL REMOTE IN terminal can be through-
output from the SERIAL REMOTE OUT terminal. (Only with OPER-
ATE ON)
R EMO T E S E L S E R
R EMO T E S E L D V
R EMO T E S E L J V C
R EMO T E S E L N E T
L OC A L F U N C T I ON
P R E RO L L
ON
ON
ON
ON
S T P + E J T
7 S E C
N E X T P A G E
P A G E B A C K
:Setting:
Ⅵ To use the SERIAL IN terminal, set REMOTE SEL SER
in the REMOTE (1/2) Menu screen to ON or LOC+REM.
Then, set the REMOTE/LOCAL switch on the front panel
accordingly.
Memo
● Besides recording, the
serial remote controller
can perform other func-
tions.
● REMOTE SEL SER
ON
: When the REMOTE/LOCAL switch is set to REMOTE,
operations can be performed via the SERIAL REMOTE
IN terminal.
● If the REMOTE SEL SER
is set to ON, unit buttons
that can be operated can
be selected from LOCAL
FUNCTION in the RE-
MOTE (1/2) Menu
screen.
LOC+REM: With the REMOTE/LOCAL switch is set either way,
operations can be performed via the SERIAL REMOTE
IN terminal.With this setting, the buttons and switches
of the unit can be used too.
Ⅵ Set FOOT SW in the REMOTE (2/2) Menu screen ac-
cording to how the serial remote terminal is used.
REMOTE (2/2) Menu screen
OFF
: Set to OFF when the serial remote controller is used.
The footswitch cannot be used.
———R E M O T
E
[
2
/
2
]
———
R E M
R E M
F
S
T
F
/
R E W M O D E
F
E
F
E
/
R E W
L EDGE : Recording and recording pause is switched at the LOW
edge of the footswitch signal.
H EDGE : Recording and recording pause is switched at the
HIGH edge of the footswitch signal.
T O P
A R
S
E
L
L
T
S
.
A
I
P
S
B
S
T
D E
Z
Y
O N
L
O F
O N
Y N C H R O N
R O
I
A
C O N
T
L
L
E R
E
T
Y
P
F
E
1
F O O T S W
A G E A C K
O F
P
B
L LEVEL : Recording is performed at the LOW edge and paused
at the HIGH edge of the footswitch signal.
:Operation:
Before using the foot switch, set BR-DV6000 to the RECORDING or
RECORDING PAUSE mode using the relevant buttons of the unit.
(Only with L EDGE and H EDGE)
Foot switch
Signal
H
Memo
Serial IN
terminal
● The foot switch can only be used to switch between RECORDING
ON and OFF.
400ms
Min
L
● The foot switch can be operated regardless of the setting of the
REMOTE/LOCAL switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-46
RECORDING
– External timer recording –
BR-DV6000 can start recording automatically when the power is supplied. Using a commercially
available timer, recording can start at a pre-determined time.
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
Timer, etc.
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
Supplied AC adapter
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
DC IN terminal
TIMER switch
Ⅵ Connect the supplied AC adapter.
Memo
Use an external timer ex-
clusively to control the start
of VCR operation.
To set the power supply to be activated by a timer, plug
the power cord of the AC adapter to the power output
terminal of the timer.
If the power is cut off by an
external timer and theVCR
operation is stopped while
the tape is running, BR-
DV6000 or the tape may be
damaged.
1. Set the REMOTE/LOCAL switch on the front panel to“LOCAL”.
2.Select the video or sound to be recorded with the INPUT SE-
LECT switch on the front panel.
With VIDEO INPUT SEL in the VIDEO Menu screen, either theYC
separate signal or the component signal can be selected.
3. Adjust the recording level of sound.
❈
DISP button
During DV input, the sound recording level cannot be adjusted.
4. Load a cassette tape for recording.
5. Set the TIMER switch on the rear panel to “REC”.
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
If the DISP button on the front panel is pressed
to change the LCD display to the enlarged
mode, the timer symbol r lights up in red.
OFF
MIC
BLANK
REC
PLAY
PHONES
REC LEVEL
TIMER
CH-1/3
CH-2/4
BR-DV6000
6. Set the time, etc., of the external timer.
When the power is supplied to the unit, recording starts automati-
cally.
LCD display
7.To stop recording, press the STOP button.
OVER
dB
CH1/3
8. To stop the external timer recording mode, set the TIMER
40 30
20
10
0
48k
L
switch to “OFF”.
OVER
CH2/4
The timer symbol r of the LCD disappears.
T
C
FREE
STOP
12H 34M 34S10F
W
e
SP222min
01/02/03
Y/C SYNC
CF
AM 01:23:45 INS VA
r
Timer symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
E-47
PLAYBACK
– Setting –
Ⅵ
SYSTEM Menu screen (
☞
Page 72)
OPERATE
PLAY
● SYNC SELECT
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
This is for setting whether to use the internal
signal or the input video signal as the synchro-
nization signal during playback if there is no in-
put of synchronization signals to the SYNC IN
terminal.
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
AUTO
: Input video signal
EXTERNAL : Internal signal
AUDIO MONITOR switch
AUDIO
OUTPUT
switch
● STL/F.ADV MODE
This mode is for selecting still images or im-
ages of frame-advance playback. (Field image,
1st field image, 2nd field image and frame im-
age)
Ⅵ
Setting the switches on the front panel
● AUDIO OUTPUT switch
To play back tapes recorded in the 32kHz mode,
use this switch to select the audio channel for
output signals from the AUDIO OUT terminal,
AUDIO MONITOR OUT terminal or the
PHONES terminal (CH 1/2, CH 3/4, MIX).
In the 48kHz mode, the sound of CH1 and CH2
is output regardless of the setting of this switch.
Memo
Output images from the DV terminal are
fixed to the 1st field images.
● LONG PAUSE TIME
For setting the time (minute) when BR-DV6000
enters the tape protection mode if BR-DV6000
is in the STILL mode for a long time.
(5, 3, 2, 1 minute or 30 seconds)
● AUDIO MONITOR switch
Use this switch to select the audio channel for
output signals from the AUDIO MONITOR OUT
(monaural) or PHONES terminal (L, MIX, R)
(☞ Page 13)
● LONG PAUSE MODE
For selecting the state of BR-DV6000 when it
enters the tape protection mode after it stayed
in the STILL mode for a prolonged period of
time. (F.ADV or STBY-OFF)
SYSTEM (1/2) Menu screen
———S
Y
S
T
T
E M
[
1
/
2
]
——————
A U T O
S
S
B
L
Y N C
S
.
E
L
E C
T
L
/
F
A D V M O D E
2
N D
● REPEAT MODE
A C K U P R E C
T
T
I
I
M E
M E
O F
5 M
F
I
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
This mode is for turning ON/OFF the REPEAT
PLAYBACK function and selecting the type of
REPEAT PLAYBACK. If REPEAT PLAYBACK
is not performed, set it to OFF. (OFF, INDEX,
V. END, TAPE END)
L
M O D E
F
I
.
A D V
E
Y
F
U N C
.
N D E
X
R E
N E
P
P
X
E
T
A
T
P
B
M O D E
O F
F
A G E
A C K
A G E
● PB/DV IN: SYSTEM (2/2) Menu
Set this item according to the signal format of
the tape to be played.
VIDEO Menu screen
———V
N P U
S C
I
D E O ———
V
S
B
P
I
D E O
U P
I
(
T
S
E
L
Y
O F
O F
/
C
F
F
E
L
T
N
T
)
Set here to PAL for a tape recorded in PAL.
A C K B U R S
T
A G E
B
A C K
Ⅵ
VIDEO Menu (
☞
Page 79)
● SET UP (for NTSC only)
For selecting whether to enable SET UP for
analog video output signals (composite, Y/C
separate or component).
AUDIO Menu screen
Ⅵ
AUDIO Menu (
☞
Page 78)
–
–
–
A U D
I
O
–
–
–
4
● A. OUT AT SEARCH
A U D
I
O
T
M O D E
8
K
A
.
O U
S
I
E
A R C H
O N
R C A
For selecting whether sound is output during
variable speed playback.
A U D
A U D
I
I
O
O
N P U
T
L
S
V
E
L
O U
T
E
–
O N
2
0
d
B
V
P
.
F
A D E
A G E
B
A C K
● AUDIO OUT LEVEL
For selecting the reference level of the audio
output level. (–20dB, –12dB)
Set it to –12dB to playback tapes recorded at
–12dB on a home-use DV machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-48
PLAYBACK
– Basic playback procedure –
PLAY button
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
MENU
Mini
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
PAUSE button
FF button
SEARCH–
REW
MIC
BLANK
HOLD
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
REW button STOP button
Note
Tapes recorded in the LP
mode cannot be played.
The monitor displays an
alarm message:“LPTAPE!”
1. Load a recorded cassette tape.
¥ The power for BR-DV6000 is turned on.
2.Start playback.
Press the PLAY button.
Memo
¥ Playback starts. If the tape is recorded in the DVCAM format,
the status display of the recording/playback speed mode (SP/
LP) disappears from the monitor or LCD.
● Images cannot be pro-
duced properly if the signal
format selected for PB/DV
IN in the SYSTEM (2/2)
Menu screen is different
from the one of the tape to
be played.
3. Pause the tape.
Press the PAUSE button.
¥ A still image is output.
● When output of still image
continues for a prolonged
period, BR-DV6000 enters
the tape protection mode.
The time can be selected
from LONG PAUSETIME in
the SYSTEM Menu screen.
● Tapes recorded in DVCAM
format can be played back
on the BR-DV6000, detec-
tion is automatic.
Memo
The still image selected with STL/F.ADV MODE in the SYSTEM
(1/2) Menu screen is output. (1st field image/ 2nd field image/
Frame image)
4. Resume playback.
Press the PLAY button.
5. Stop playback.
Press the STOP button.
Playback of
Fast forward/rewind
tapes recorded in
the NTSC format
Ⅵ When BR-DV6000 is in the STOP mode, press the FF
button to fast-forward the tape.
Ⅵ When BR-DV6000 is in the STOP mode, press the REW
button to rewind the tape.
BR-DV6000 can be used with
PAL or NTSC standards.Please
select the desired format in the
menu.
• Set PB/DV IN in the SYSTEM
(2/2) Menu screen to NTSC
for playing a tape recorded in
NTSC.
• Signal systems cannot be
converted.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-49
PLAYBACK
– Special playback functions –
SEARCH–/; button
SEARCH+/: button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
PAUSE button
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
REW button FF button
Frame-advance playback
SYSTEM (1/2) Menu screen
:Setting:
–
–
–
S
L
Y
S
T
T
E M
[
1
/
2
]
–
–
–
–
–
–
Ⅵ STL/F. ADV MODE in the SYSTEM (1/2) Menu screen
S
S
B
L
L
“
Y N C
S
.
E
E C
A U T O
T
L
/
F
A D V M O D E
2
O F
5 M
F
V
O F
N D
The unit of frame advance and still images can be selected.
FIELD
1st FIELD : Frame-by-frame advance and stops at the 1st field.
2nd FIELD : Frame-by-frame advance and stops at the 2nd field.
A C K U P R E C
T
T
I
I
M E
M E
F
I
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
: Field-by-field advance
M O D E
.
A D V
”
A
E
Y
F
U N C
.
A R
R E
N E
A G E
P
X
E
T
T
P
B
M O D E
F
A G E
A C K
P
FRAME
: Frame-by-frame advance.
::Operation:
1.Set BR-DV6000 to the STILL mode.
2. Press the PAUSE button to perform frame advance.
Search mode
Memo
:Setting:
● Whether to enable/dis-
able audio out in the
SEARCH mode can be
selected with A. OUT AT
SEARCH in the AUDIO
Menu screen.
Ⅵ Set“;, :” KEY FUNC in the SYSTEM (1/2) Menu screen
to VAR.
::Operation:
1.Set BR-DV6000 to the PLAYBACK or the STILL mode.
● Playback at 0.1 X speed
is step-slow playback
(continuous frame-ad-
vance playback / frame-
reverse playback).
● During slow-playback or
frame-advance, noise is
generated to the output
images from the DV ter-
minal.For recording slow-
playback images, use
analog output signals of
BR-DV6000.
2. Press the FF button to start fast-forward playback.
Press the REW button to start reverse playback.
Ⅵ Press the SEARCH+/: button to increase the search
speed. Every time you press this button, the speed in-
creases more.
Ⅵ Press the SEARCH–/; button to decrease the search
speed. Every time you press this button, the speed de-
creases more.
Search speed
SEARCH+/: button z (Fast) (Slow) { SEARCH–/; button
ן –20...ן –10...ן –5...ן –2...ן –1...ן –0.5...ן –0.33...ן –0.2... ן 0.1...STILL...ן 0.1...ן 0.2...ן 0.33...ן 0.5...ן 1(PLAY)...ן 2... ן 5... ן 10...ן 20 ❈
The maximum speed in the DVCAM mode is 15X.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-50
Increasing the playback speed by 7% or decreasing the speed by 10%
PLAY button
Increasing the playback speed by 7%
1.Set BR-DV6000 to the PLAYBACK, STILL or STOP mode.
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
2. Press the FF button while holding down the PLAY button.
While the buttons are held down, the playback speed is increased
by 7%.
PROFESSIONAL
REW
AUDIO
INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
3. When the buttons are released, the operation changes as fol-
lows.
Y/C
BR-DV6000
LOCAL
(CPN)
Ⅵ If the PLAY button is released first, playback continues
FF button
at the increased speed of +7%. (Latch mode)
To return to the normal playback speed, press the PLAY
button.
Ⅵ If the FF button is released first, it returns to the nor-
mal playback speed.
PLAY button
Decreasing the playback speed by 10%
1.Set BR-DV6000 to the PLAYBACK, STILL or STOP mode.
2. Press the REW button while holding down the PLAY button.
While the buttons are held down, the playback speed is decreased
by 10%.
OPERATE
A.DUB
REC
PLAY
STOP
PAUSE
FF
PROFESSIONAL
EJECT
REW
AUDIO
INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
3. When the buttons are released, the operation changes as fol-
lows.
Y/C
BR-DV6000
LOCAL
(CPN)
Ⅵ If the PLAY button is released first, the playback con-
REW button
tinues at the decreased speed of –10 %. (Latch mode)
To return to the normal playback speed, press the PLAY
button.
Ⅵ If the REW button is released first, it returns to the nor-
mal playback speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-51
PLAYBACK
– Search function –
Index search
This function searches to the position where the index signal is recorded.
:Setting:
Set “;, :” KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
MIC
BLANK
:Operation:
PHONES
REC LEVEL
Ⅵ To search an index point in the forward direction from
CH-1/3
CH-2/4
BR-DV6000
the current tape position:
• Press the SEARCH + button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
SEARCH–
button
SEARCH+
button
Ⅵ To search an index point in the reverse direction from
Monitor screen
the current tape position:
• Press the SEARCH – button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
INDEX+1
Ⅵ When the SEARCH + or SEARCH – button is pressed,
the unit fast-forwards or rewinds to the specified in-
dexed position and start playing.
Memo
Index search progressing:
displayed on the screen
(The number denotes the
● If the interval between index signals is less than one minute, the
function may not work well.
● The specifications for index signal recording varies with the device
used.
corresponding index position.)
Blank search
Blank search
This function searches unrecorded parts of the tape.
Ⅵ In the STOP mode, press the BLANK button.
¥
• If the current position is at a recorded part of the tape, BR-
DV6000 fast-forwards until an unrecorded part is reached
and stops there.
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
MIC
BLANK
• If the current position is an unrecorded part of the tape, BR-
DV6000 will first advance the tape in the forward direction
for confirmation and thereafter rewind and go into the STILL
mode at the last recorded position.
• During a blank search, “BLANK SEARCH” is displayed on
the monitor.
PHONES
REC LEVEL
CH-1/3
CH-2/4
BR-DV6000
BLANK button
Monitor screen
BLANK SEARCH
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
– Repeat playback –
Three types of repeat playback are available for BR-DV6000.
The repeat playback function can be set with REPEAT MODE in the SYSTEM (1/2) Menu screen.
SYSTEM (1/2) menu screen
:Setting:
———S
Y
S
T
T
E M
[
1
/
2
]
——————
A U T O
Ⅵ REPEAT MODE in the SYSTEM (1/2) Menu screen
S
S
B
L
Y N C
S
.
E
L
E C
OFF
INDEX
: No repeat playback.
: Repeat playback between positions where index sig-
nals are recorded.
: Repeat playback from the beginning of the tape to
the position where recording of video signals ends.
T
L
/
F
A D V M O D E
2
N D
A C K U P R E C
T
T
I
I
M E
M E
O F
5 M
F
I
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
L
M O D E
F
I
.
A D V
E
Y
F
U N C
.
N D E
X
R E
N E
P
X
E
T
A
T
P
B
M O D E
O F
F
V. END
A G E
A C K
P
A G E
TAPE END : Repeat playback from the beginning to the end of
the tape.
INDEX repeat playback
:Operation:
● If no index signal is de-
tected during playback, the
tape will run until the end.
If no index signal is de-
tected during rewind, the
tape will rewind until the
beginning.
● If the interval between in-
dex signals is less than
one minute, the function
may not work well.
1. Press the REW button to rewind the tape to the beginning.
2. Press the PLAY button to start playback.
¥ When it reaches the position set at REPEAT MODE, the tape
starts rewinding and plays back again.
Ⅵ To abort the repeat playback function, press the STOP
button.
Repeat operation
Memo
If the head is dirty, repeat
playback may not work
well.
TAPE END
V. END
INDEX
Playback
Rewind
Index signal
Index signal
Beginning of tape
End of tape
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
– Multi cue-up –
Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up
points at the Multi Cue-up screen.The registered tape positions (cue-up points) can be searched.
8 button
RESET button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
SET button
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
9 button
COUNTER switch
CUE UP button
Registering cue-up points
1. Set the COUNTER switch to TC.
2. Load a tape with time codes recorded.
3. Press the CUE UP button.
¥ The CUE UP screen appears on the monitor or the LCD.
4. Perform playback or search. At the position to be registered,
set it to the STILL or STOP mode.
Memo
For details on time code
setting and recording:
(☞ Page 59)
5. Press the 8 or 9 button to bring the cursor to the cue-up
point. Press the SET button.
¥ Register the time code data of the current position as a cue-up
point.
• If no tape is loaded, “00” is registered.
• Cue-up points can be registered while the tape is being played
back.
Cursor
Cue-up point
6. To register more cue-up points, repeat steps 4and 5. Up to 5
cue-up points can be registered.
–
–
– M U
L
T
I
C U E U P
–
–
–
–
–
–
C U E
C U E
C U E
C U E
C U E
I
0
0
–
1
–
0
3
–
1
–
:
:
:
:
:
0
4
–
2
–
1
2
–
1
–
:
:
:
:
:
3
5
–
4
–
5
9
–
8
–
:
:
:
:
:
1
2
–
0
–
1
1
–
7
–
2
3
4
5
T
T
S
Clearing registered cue-up points
Press the 8 or 9 button to bring the cursor to the cue-up point to
be cleared. Press the RESET button.
E
“
X
S
I
E
”
E
:
:
:
E N
C
E
T
E
R Y C U E D A
A R C U E D A
T
T
A
A
“
R E
T
”
L
X
“
C U E U P
”
E C U
T
E
C U E U P
¥ After a cue-up point is cleared, “– –” is displayed.
Multi Cue-up screen
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
SET
button
Changing cue-up points
1 Press the 8 or 9 button to bring the cursor to the cue-up
point to be changed. Press the : button.
8 button
¥ The hour digits of the registered time code display blink.
Press the : button to select the digit to be changed.
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
2 Press the 8 or 9 button again to change the time code.
Press the 8 button to increase the time code data by 1 frame.
Press the 9 button to decrease the time code data by 1 frame.
MIC
BLANK
PHONES
REC LEVEL
CH-1/3
CH-2/4
BR-DV6000
3 Press the SET button to register the changed time code.
If no time code is to be registered, do not press the SET button.
Instead, press the ; button to make the blinking time code display
disappear.
; button 9 button : button
Memo
If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the display
returns to the normal
screen.
Exiting the Multi Cue-up screen
Press the 8 or 9 button to bring the cursor to EXIT. Press the SET
button.
¥ The display of the monitor or the LCD returns to the normal screen.
Searching cue-up points
8 button
1. Set the COUNTER switch to TC.
2. Press the CUE UP button when the normal screen is displayed.
¥ The Multi Cue-up screen appears on the monitor or the LCD.
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
3. Press the 8 or 9 button to bring the cursor to the cue-up
point to be searched.
MIC
BLANK
4. Press the CUE UP button.
PHONES
REC LEVEL
¥ The cue-up operation for the selected point is performed.
CH-1/3
CH-2/4
BR-DV6000
9 button
CUE UP button
Cue-up point
While searching is being per-
–
–
– M U
L
T
I
C U E U P
–
–
–
–
–
–
–
–
– M U
L
T
I
C U E U P
–
–
–
–
–
–
formed, the cue-up point to be
searched flashes on the moni-
tor or the LCD.
C U E
C U E
C U E
C U E
C U E
I
0
0
–
1
–
0
3
–
1
–
:
:
:
:
:
0
4
–
2
–
1
2
–
1
–
:
:
:
:
:
3
5
–
4
–
5
9
–
8
–
:
:
:
:
:
1
2
–
0
–
1
1
–
7
–
C U E
C U E
C U E
C U E
C U E
I
0
0
–
1
–
0
3
–
1
–
:
:
:
:
:
0
4
–
2
–
1
2
–
1
–
:
:
:
:
:
3
5
–
4
–
5
9
–
8
–
:
:
:
:
:
1
2
–
0
–
1
1
–
7
–
2
3
4
5
T
T
S
2
3
4
5
T
T
S
E
“
X
S
I
E
“
X
S
I
Memo
● For cue-up operation, use
tapes with continuous time
codes recorded.
E
R E
”
E
:
:
:
E N
C
E
T
E
R Y C U E D A
A R C U E D A
T
T
A
A
E
R E
”
E
:
:
:
E N
C
E
T
E
R Y C U E D A
A R C U E D A
T
T
A
A
“
“
T
”
L
X
“
“
T
”
L
X
C U E U P
”
E C U
T
E
C U E U P
C U E U P
”
E C U
T
E
C U E U P
● If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the COUN-
TER mode does not change.
Multi Cue-up screen
During cue-up operation
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
– External timer playback –
The unit can start playing automatically when the power is supplied. Using a commercially avail-
able timer, playback can start at a pre-determined time.
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
Timer
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
Supplied AC adapter
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
DC IN
terminal
TIMER switch
Memo
Use an external timer ex-
clusively to control theVCR
operation.
If the power is cut off by an
external timer and theVCR
operation stopped while the
tape is running, BR-
DV6000 or the tape may be
damaged.
Ⅵ Connect the supplied AC adapter.
To set the power supply power to be activated by a timer, plug the
power cord of the AC adapter to the power output terminal of the
timer.
1. Load the tape for playback.
2. With REPEAT MODE in the SYSTEM (1/2) Menu screen,whether
to enable/disable repeat playback, and the type of repeat play-
back, can be selected.
3. Set the TIMER switch on the rear panel to “PLAY”.
If the DISP button on the front panel is pressed
to change the LCD display to the enlarged
mode, the timer symbol lights up in green.
OFF
DISP button
REC
PLAY
TIMER
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
4.Set up the time, etc., of the external timer.
When the power is supplied to the unit, playback starts automati-
cally. If the repeat playback mode is selected, repeat playback is
executed.
MIC
BLANK
PHONES
REC LEVEL
CH-1/3
CH-2/4
BR-DV6000
5. To stop playback, press the STOP button.
6. To stop the external timer playback mode, set theTIMER switch
to “OFF”.
LCD Display
The timer symbol of the LCD disappears.
OVER
dB
CH1/3
40 30
20
10
0
48k
L
OVER
CH2/4
T
C
FREE
STOP
12H 34M 34S10F
W
e
SP222min
01/02/03
Y/C SYNC
CF
AM 01:23:45 INS VA
r
Timer symbol
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
– Dubbing with another machine using the
SERIAL REMOTE OUT/DV terminals –
When the REPLICATION function is turned ON and BR-DV6000 is set to the PLAYBACK mode,
the REC command will output from the SERIAL REMOTE OUT terminal or the DV terminal. With
this function, the video and sound being played back on BR-DV6000 can be dubbed by another
machine by simply pressing the PLAY button.
Ⅵ For recording analog video and audio signal, use the SERIAL REMOTE OUT terminal.
Analog video/audio signals
BR-DV6000
Dubbing
machine
Memo
For information on connec-
COMPONENT
VIDEO
REMOTE2
LINE
IN
tion with the SERIAL RE-
MOTE OUT terminal:
(☞ Page 34)
Y/C
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
SERIAL (IN) terminal
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
REC
command
SERIAL REMOTE OUT terminal
Ⅵ For recording digital video and audio signals, use the DV terminal.
BR-DV6000
Dubbing machine
COMPONENT
VIDEO
REMOTE2
LINE
Y/C
IN
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
DV
terminal
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
DC12V
REMOTE1
Digital video/audio signals
REC command
DV
terminal
::Setting:
Ⅵ BR-DV6000
–
–
–
S
Y
S
T
E
E M
[
2
/
2
]
–
–
–
–
I
–
–
D C
I
N
X
I
M O D E
W R
O P
O N
E
O F
F
I
N D E
I
I
E
T
R E
R E
P
P
/
L
L
C A
C A
I
T
T
N
O N
D E
S
E R
A
L
● For using the DV terminal, set BACKUP REC TIME in the
SYSTEM (1/2) menu screen to “OFF”.
I
L
A
Y
O F
F
L
P
F
B
D V
P
A
A C T O R Y
S
E
T
T
I
T
N G
E R
C A N C E
L
0
D R U M H O U R M E
0
0
0
0
0
● Set the items in the SYSTEM (2/2) Menu screen.
• Set REPLICATION to SERIAL or DV depending on the terminal.
• To delay the output timing for the REC command in the PLAY-
BACK mode, set REPLICATE DELAY (OFF, 1 - 5 seconds).
If the DV terminal is to be used, set REPLICATE DELAY to a
larger value.
P
A G E
B
A C K
SYSTEM (2/2) Menu screen
Ⅵ Dubbing machine
• When the SERIAL terminal is to be used, select the mode that
can receive commands of the SERIAL (IN) terminal.
• When the DV terminal is to be used, select the DV input mode.
Memo
::Operation:
With the DV terminal in use,
this function and the
backup recording function
cannot be operated at the
same time.
1.Load a tape for playback into BR-DV6000 and a tape for re-
cording into the dubbing machine.
2. Press the PLAY button to set BR-DV6000 into the PLAYBACK
mode.
• The unit outputs the REC command from the SERIAL REMOTE
OUT terminal or the DV terminal and the dubbing machine starts
recording.
3. To stop recording, press the STOP button of the dubbing ma-
chine.
4. To exit from the REPLICATION mode, set REPLICATION to OFF.
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CODE
– Displaying the time code –
BR-DV6000 can record and play back EBU-compliant time code and user’s bit. Whether to record
the user’s bit can be selected with U-BIT in the TC/UB/CLOCK (2/2) Menu screen. With the time
code function, accurate positions of the tape contents can be specified to enhance editing preci-
sion and operation efficiency. During recording or playback, the time code and user’s bit are dis-
played on the monitor or the LCD.
Status display (Monitor/ LCD)
TCG
TCR
: Time code generator data
: Time code reader data
3 2 K C H – 1 / 2
A S S EM
S P 0 0 0 m i
n
DTCG : Input time code data from the
DV IN/OUT terminal
ETCG : Input time code data from the
TIME CODE IN terminal
Framing mode
(for NTSC only)
: (colon) :Non-drop frame
. (dot) :Drop frame
UBG : User’s bit generator data
UBR
: User’s bit reader data
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
DUBG : User’s bit input data from the
DV IN/OUT terminal
T C R 0 2 : 0 0 : 0 0 : 0 0
EUBG : User’s bit input data from the
TIME CODE IN terminal
Time code/User’s bit display
During recording : Data of time code generator
During playback : Data recorded on the tape
During DV input : Data selected with TC DUPLICATE
in the TC/UB/CLOCK Menu screen
DISPLAY (1/2) Menu screen
Ⅵ To display the time code/ user’s bit, perform the follow-
ing settings.
–
–
–
I
D
I
S
T
P
L
A
S
Y
S
[
1
/
2
]
–
–
–
L
L
L
L
D
C D B R
G H
N E
0
0
0
O F
O N
L
• Set DISPLAY in the DISPLAY (1/2) Menu screen to ON or AUTO.
¥ The status is displayed on the monitor or the LCD.
C D C H R O M A
C D C O N R A
T
S
T
F
C D A U T O O F
F
I
S
P
L
T
A
Y
• Set TIME CODE in the DISPLAY (2/2) Menu screen to ON.
¥ The time code, user’s bit or CTL counter is displayed at the
counter display section of the status display.
C O U N
N E
A G E
E R P O S
I
.
O W E R
-
R
X
T
P
B
A G E
A C K
P
• Select the counter display mode with the COUNTER switch on
the front panel.
The display position can be
selected.
• To display the time code, select TC.
• To display the user’s bit, select UB.
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
DISPLAY (2/2) Menu screen
NAL
Checking the data of time code generator
–
–
–
D
I
S
P
L
A
Y
[
2
/
2
]
–
–
–
REW
T
V
T
T
I
T
A
I
M E C O D E
O N
O N
O N
D A
O N
O N
D D
R
P
M O D E
When it is in the STOP mode,
press the REC button and the data
of the time code generator will be
displayed while the button is held
down.
AUDIO
INPUT
COUNTER MONITOR OUTPUT SELECT REMOTE
E
M E
R E M A
I
N
.
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
/
O
D A
I
I
S
S
B
T
N
E
F O
T
/
E
+
T M
Y/C
V6000
LOCAL
(CPN)
A U D
I
E D
D A
T
P
I
T
E
N
T
T
F O
.
E
E
T
M E
Y
Y
L
L
.
.
M M
/
Y
Y
I
2
4
H O U R
COUNTER switch
A G E
A C K
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CODE
– Presetting the time code –
Variable values can be set for the time code and the user’s bit for efficient material management
and editing.
SET button
DISP/8 button
RESET button
PROFESSIONAL
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
; button
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
HOLD button 9 button : button
COUNTER switch
TC/UB/CLOCK(1/2) Menu screen
:Setting:
...TC/UB/CLOCK(1/2) Menu screen
–
–
–
T
C
/
U B
C G S O U R C E
C G E C
/
C
L
O C K
(
1
I
/
2 )– –
–
Ⅵ Set TCG SOURCE to “INTERNAL”.
Ⅵ Set TCG SELECT to “PRESET”.
Ⅵ TCG MODE:
T
T
T
N
T
E R N A
L
S
E
L
T
P R E
R E C
S
-
E
T
C G M O D E
F
R U N
N D
/
B
D
I
F
T
(
(
L
S
N
P
I
T
A
S C
)
–
–
–
D
T
T
F
C
C
L
)
T
O N
O F
O F
D U P
C A
T
E
F
F
REC-RUN : The time code runs only during recording.
FREE-RUN : The time code runs from the point when the preset
is completed.
O F
T
F
P
B
E
N E
X
A G E
A C K
P
A G E
❈
In the case of the user’s bit, setting is not required.
LCD display
... Perform setting while checking the LCD display.
:Operation:
OVER
dB
CH1/3
This section describes the setting of the time code.The setting of
the user’s bit is the same. Values that can be used to configure
the user’s bit are hexadecimal numeral from 0 – F.
40 30
20
10
0
48k
L
OVER
CH2/4
T
C
RRUN
STOP
00H 00M 00S00F
1. Set the counter switch to TC.
(For user’s bit, set the switch to UB.)
e
SP222min
01/02/03
Y/C SYNC
CF
2. Press the DISP button to change the LCD to its enlarged dis-
play mode.
AM 01:23:45
r
3. In the STOP mode, press the HOLD button.
Memo
¥ The hour digit of the counter starts blinking.
● To stop the setting, press
the HOLD button to return
to the normal screen.
4. Press the 8 or 9 button to change the value.
5. Press the : or ; button to move blinking to the next digit.
● To preset all digits to 0,
press the RESET button
when any of the digits is
blinking.
● When the hour digit is blink-
ing, the frame digit starts
blinking when the ; button
is pressed.
6. Press the 8 or 9 button to change the value of the blinking
digit.
7. Repeat steps 5 and 6 to perform the necessary settings.
8. Press the SET button to confirm the setting value and blink-
ing of the counter stops.
● If a user’s bit is input with
its all digits set as
“F”, BR-DV6000 converts
FFFFFFFF to FFFFFFFE
before recording.
E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CODE
– Recording the time code –
Time codes can be recorded with the following ways. Whether to record user’s bit can be selected
with U-BIT in the TC/UB/CLOCK (2/2) Menu screen.
• Record it from preset data.
• Record it following the one last recorded on the tape.
• Record the time code, which is input to the DV IN/OUT terminal.
• Record the time code from an external time code generator.
Recording from preset data
Record preset time code data to the internal time code generator in theTIME CODE Preset screen.
TC/UB/CLOCK(1/2) Menu screen
:Setting:
–
–
–
T
C
/
U B
C G S O U R C E
C G E C
/
C
L
O C K
(
1
/
2 )– –
–
● Set the TC/UB/CLOCK(1/2) Menu as follows.
T
T
T
I
N
T
E R N A
L
S
E
L
T
P R E
R E C
S
-
E
T
TCG SOURCE : INTERNAL
TCG SELECT
TCG MODE
C G M O D E
F
R U N
: PRESET
: REC RUN or FREE RUN
N D
/
B
D
I
F
T
(
(
L
S
N
P
I
T
A
S C
)
–
–
–
D
T
T
F
C
C
L
)
T
O N
O F
O F
D U P
C A
T
E
F
F
O F
T
F
P
B
E
N E
X
A G E
A C K
P
A G E
:Operation:
1. Check the preset time code.
1 Set the COUNTER switch to TC or UB.
2 In the STOP mode, hold down the REC button.
¥ The preset time code or the user’s bit is displayed on the
monitor or the LCD.The counter mode is displayed as TCG
or UBG.
REC button
OPERATE
A.DUB
EJECT
REC
PLAY
PAUSE
FF
PROFESSIONAL
3 When the REC button is released, it returns to the original
REW
STOP
display.
AUDIO
INPUT
2. Record.
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
BR-DV6000
LOCAL
(CPN)
Press the PLAY button while holding down the REC button.
¥ The time code and user’s bit are recorded.
To stop recording, press the STOP button.
COUNTER switch
Preset time code
● Stopping the power supply to the DV IN terminal of BR-DV6000 cancels the preset value of the time code
generator.
● With FREE RUN, if the mode is changed from OPERATE ON to OPERATE OFF and back to OPERATE
ON before BR-DV6000 is restarted, the advance of the time generator may deviate. Do not change the
mode to OPERATE OFF to keep the time generator data agreed with those of other machines.
E-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording time code following the one last recorded on the tape
BR-DV6000 is equipped with a time code reader. When it enters the RECORD mode from the
RECORDING PAUSE mode, it reads the time code data already recorded on the tape and contin-
ues recording time code from that value. (Regeneration)
TC/UB/CLOCK(1/2) Menu screen
:Setting:
–
–
–
T
C
/
U B
C G S O U R C E
C G E C
/
C
L
O C K
(
1
I
/
2 )– –
–
● Set the TC/UB/CLOCK(1/2) Menu as follows.
T
T
T
N
T
E R N A
L
S
E
L
T
R E G E N
TCG SOURCE : INTERNAL
TCG SELECT
TCG MODE
C G M O D E
F
R E C
–
O N
O F
O F
-
R U N
: REGEN
N D
/
B
D
I
F
T
(
(
L
S
N
P
I
T
A
S C
)
–
–
D
T
T
F
C
C
L
)
T
: No setting required. It will be in the same run-
ning mode as the tape.
D U P
C A
T
E
F
F
O F
T
F
P
B
E
N E
X
A G E
A C K
P
A G E
:Operation:
1. Insert a tape with time codes recorded.
2. Set BR-DV6000 to the RECORDING PAUSE mode at the posi-
tion where time codes are to be recorded again.
3. Press the PLAY button to go to the RECORDING mode.
¥ Time codes will be recorded on the tape, starting from where it
stopped at last recording.
The counter mode display shows either TCR or UBR.
Recording time code, input to the DV IN/OUT terminal
TC/UB/CLOCK(1/2) Menu screen
:Setting:
–
–
–
T
C
/
U B
C G S O U R C E
C G E C
/
C
L
O C K
(
1
I
/
2 )– –
–
T
T
T
N
T
E R N A
L
Ⅵ Set the INPUT SELECT switch on the front panel to DV.
S
E
L
T
P R E
R E C
S
-
E
T
C G M O D E
F
R U N
Ⅵ Set TC DUPLICATE in the TC/UB/CLOCK(1/2) Menu
N D
/
B
D
I
F
T
(
(
L
S
N
P
I
T
A
S C
)
–
–
–
D
T
T
F
C
C
L
)
T
O N
A U T O
O F
screen to AUTO.
D U P
C A
T
E
O F
T
F
P
B
E
F
N E
X
A G E
A C K
P
A G E
Memo
Time codes input to the
TIME CODE IN terminal
are ignored.
Do not connect any device
to the TIME CODE OUT
terminal.
:Operation:
1. Check the time code of the DV input terminal.
Press the REC button when BR-DV6000 is in the STOP mode to
display the time code on the monitor or the LCD. It will be dis-
played while the button is held down.
The counter mode display shows DTCG or DUBG.
2. Select the RECORDING mode.
¥ Record time codes from the DV input terminal.
Memo
● For date/time also, data from the DV IN terminal are recorded.
● When this terminal is connected to a D9 VCR, data/time data
are not recorded.
E-61
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CODE
– Recording the time code – (continued)
Record time codes from an external time code generator
Synchronize the internal time code generator with the EBU-compliant LTC time code, which is
input from the TC IN terminal. After synchronization (slave lock), the internal time code generator
continues to run even if external time code signals are not input.
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
Synchronized signal
generator
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
REF video
signal
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
SYNC IN terminal
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
Time code generator
DC12V
TIME CODE IN terminal
LTC time code
:Connection:
Ⅵ Input reference video signals to the external time code
generator and the SYNC IN terminal of BR-DV6000.
Ⅵ Connect theTIME CODE IN terminal of BR-DV6000 with
the LTC time code output terminal of the external time
code generator.
TC/UB/CLOCK(1/2) Menu screen
–
–
–
T
C
/
U B
C G S O U R C E
C G E C
/
C
L
O C K
(
1
/
2 )– –
–
T
T
T
E
X
T
E R N A
L
:Setting:
Ⅵ Front switches
S
E
L
T
P R E
R E C
S
-
E
T
C G M O D E
F
R U N
N D
/
B
D
I
F
T
(
(
L
S
N
P
I
T
A
S C
)
–
–
–
D
T
T
F
C
C
L
)
T
O N
O F
O F
• Set the INPUT SELECT switch to any setting except DV.
• Set the COUNTER switch to “TC”.
• Press the DISP button and set the LCD to the enlarged display
mode.
D U P
C A
T
E
F
F
O F
T
F
P
B
E
N E
X
A G E
A C K
P
A G E
Ⅵ TC/UB/CLOCK(1/2) Menu screen
Set TCG SOURCE to “EXTERNAL”.
Memo
:Operation:
● If the phase of the external
time code generator and
the phase of the video are
not synchronized, the
“EXT” display blinks.
1. Perform setting for the external time code generator.
2. Set BR-DV6000 to the RECORDING mode.
¥ The EXT display of the LCD lights up and the time code and
user’s bit of the external time code generator are recorded on
the tape.
● If a user’s bit is input to the
TIME CODE IN terminal
with its all digits set as
“F”, BR-DV6000 converts
FFFFFFFF to FFFFFFFE
before recording.
During recording, if the internal time code generator is slave-
locked once, the time code continues to run even if the input
time code stops.
OVER
CH1/3
40 30
20
10
0
dB
48k
L
OVER
CH2/4
T
C
EXT
12H 34M 34S10F
W
e
STOP
SP222min
01/02/03
Y/C SYNC
CF
AM 01:23:45 INS VA
r
EXT display
E-62
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CODE
– Playing back the time code –
BR-DV6000 is also equipped with a time code reader. During playback, the time code or user’s bit
data recorded on the tape is displayed on the monitor or the LCD.
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
OPERATE
PLAY
IN
R-Y
B-Y
Y
A.DUB
EJECT
REC
PAUSE
FF
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
REW
STOP
BLANK
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
AUDIO
INPUT
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
IN
OFF
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
REC
PLAY
Y/C
DV
IN/OUT
CH-1/3
CH-2/4
BR-DV6000
MONITOR
OUT
LOCAL
(CPN)
TIMER
SERIAL
REMOTE
SIGNAL
GND
REMOTE1
DC12V
TIME CODE OUT terminal
COUNTER switch
Monitor / LCD (Status display)
1. Select the time code data to display.
Set the COUNTER switch to “TC” or “UB”.
3 2 K C H – 1
A S S EM
/
2
S P 0 0 0 m i
n
2.Press the PLAY button to go to the PLAYBACK mode.
¥ It displays the time code and the user’s bit on the monitor or
the LCD. The counter display mode becomes TCR or UBR.
• The LTC time code is output from theTIME CODE OUT terminal
on the rear panel.
0 3
1 1
/
:
0 4
2 0
/
:
0 3
0 0
P L A Y
❈
The VITC time code is not output.
T C R 0 2
:
0 0
:
0 0
:
0 0
If the COUNTER switch is set to CTL, the time code is not out-
put.
Time code or user’s bit
Caution on time code playback
● During playback, if a portion of tape without recorded time code
runs through, the time code stops running. Playback continues.
● If tapes without recorded user’s bit, e.g. those recorded with a
home-use DV VCR, are played back on BR-DV6000, “– –” is dis-
played.
E-63
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT – Editing with an RS-422A/JVC bus edit remote controller –
BR-DV6000 is designed to be capable to make tape-to-tape editing by RM-G800 JVC bus remote
controller or RM-G820 as well as other equivalent RS-422A remote controller. Of course, it can be
applied to feeder player.
• +/– 0 frame editing accuracy with time code, capstan bump (for both recorder and player) and external
sync by RS-422A editing controller.
• Ready for A/B roll editing.
• Digital editing via DV interface.
Ⅵ Chart for editing mode when BR-DV6000 is used as editing recorder
1) Editing over recorded tape with 48 kHz au-
dio in analog interface
2) Editing over recorded tape with 32 kHz au-
dio in analog interface
Edit mode
Analog editing
Edit mode
Analog editing
Mode select
OSD
32 kHz mode
Mode select
OSD
48 kHz mode
Yes
2
ASSEM
INS V
Yes
Yes
*
ASSEM
INS V
ASSEM
VIDEO
VIDEO
AUD-1
AUD-2
ASSEM
VIDEO
VIDEO
AUD-1
AUD-2
Yes
2
INS VA
INS A
Yes
Yes
*
INS VA
INS A
Yes
Yes
AUD-1
AUD-2
AUD-1
AUD-2
2
*
VIDEO
AUD-1
VIDEO
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
INS VA12
INS VA34
Yes
Yes
*
*
INS VA1
INS VA2
No
No
AUD-1
AUD-2
TC
INS A12
INS A34
INS TC
Yes
Yes
Yes
AUD-1
AUD-2
TC
INS A1
INS A2
INS TC
No
No
*
*
Yes
*2 : In case of CH1/CH2/CH3/CH4 simultaneous
insert or assemble edit mode of 32 kHz audio,
input signal to audio input connector CH1/CH3
is recorded onto CH1 and CH3 tracks simulta-
neously and input signal to audio input con-
nector CH2/CH4 is recorded onto CH2 and CH4
tracks simultaneously.
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
E-64
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Editing over recorded tape with 48 kHz or
44.1 kHz audio in DV interface
4) Editing over recorded tape with 32 kHz au-
dio in DV interface
Edit mode
DV editing
Edit mode
DV editing
Mode select
OSD
48 kHz/44.1 kHz mode
Mode select
OSD
32 kHz mode
ASSEM
INS V
Yes
Yes
ASSEM
INS V
Yes
Yes
ASSEM
VIDEO
VIDEO
AUD-1
AUD-2
ASSEM
VIDEO
VIDEO
AUD-1
AUD-2
INS VA
INS A
Yes
Yes
INS VA
INS A
Yes
AUD-1
AUD-2
AUD-1
AUD-2
Yes
No*
VIDEO
AUD-1
VIDEO
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
INS VA1
INS VA2
*
*
No
No
INS VA12
INS VA34
No
*
AUD-1
AUD-2
TC
INS A1
INS A2
INS TC
No
No
No
*
*
AUD-1
AUD-2
TC
INS A12
INS A34
INS TC
No
No
No
*
*
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
Note for audio insert editing (48 kHz/32 kHz mode)
● If the audio mode setting by menu on BR-DV6000 (audio mode of input signal in DV interface) is
different from that of audio mode of the recorded tape, insert editing is impossible. (If editing is
performed, it will automatically stop.)
● If the audio mode is changed during performing audio insert editing,
• In case of DV interface editing, editing will be continued in accordance with the changed audio
mode.
• In case of analog interface editing, if the audio mode of the recorded tape is changed from 32 kHz
mode to other mode, editing will automatcically stop during CH1/2 or CH3/4 audio insert editing.
• In case of analog interface editing, editing will be continued in accordance with the audio mode
setting by menu on BR-DV6000 during CH1/2/3/4 simultaneous audio insert editing or assemble
editing even if the audio mode of the recorded tape is changed.
Ⅵ Following editing mode is not available
• Variable motion editing
• Slow motion editing
• Audio or Video split editing
• Frame by frame editing (if editing of duration of less than 10 frames, it will automatically perform 10
frames editing)
• CTL editing (Editing may be possible in CTL mode, but since counter data cannot be coincided with
tape position, editing accuracy will become worse.)
E-65
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT – Editing with an RS-422A/JVC bus edit remote controller – (continued)
Editing procedure with BR-DV6000
:Connection:
For details on connection, refer to pages 32 and 33.
:Setting:
Ⅵ Set the REMOTE/LOCAL switch on the front panel to REMOTE.
Ⅵ SYSTEM (1/2) Menu screen
SYNC SELECT : If there is no input of synchronization signals to the SYNC IN terminal, set this item
of the recorder to AUTO. During playback, it synchronizes with the input video
signal.
Ⅵ REMOTE (1/2) Menu screen
• Set REMOTE SEL 9-PIN to ON (for RS-422A).
Memo : To use the REMOTE 2 (12-PIN) terminal simultaneously, set REMOTE SEL JVC to “OFF”.
• Set REMOTE SEL JVC to ON (for JVC-BUS).
Memo : To use the REMOTE 1 (9-PIN) terminal simultaneously, set REMOTE SEL 9-PIN to “OFF”.
• PREROLL:
Use this item to set the preroll time (second). It is recommended that at least 7 seconds be set.
Memo : The setting by the editing remote controller precedes if applicable.
Ⅵ REMOTE (2/2) Menu screen
• REM STOP SEL (only for RS-422A)
Select the mode for BR-DV6000 to be in when it receives standby-on signals.
EE
PB
: EE mode (STOP mode)
: Playback mode (STILL mode)
• PB START DELAY
Set the editing timing. If the start points of edit are not concurrent, adjust the playback startup timing.
0F
: No correction
1F-15F: Delays the timing for the duration of the set frames. If BR-DV6000 is connected to an
editing remote controller with no bump function, use this setting to adjust the edit precision.
Memo : No bump function is available for RM-G800.
• SYNCHRONIZATION (only for RS-422A)
Whether to use the bump function to enhance edit precision can be selected.
OFF : Bump off
ON
: Bump on. It may slow down the edit operation.
• CONTROLLER SEL (only for RS-422A)
Set this item according to the type of controller to be connected. (☞ Refer to Page 77)
Set it to TYPE 1 when RM-G820 is used.
Ⅵ TC OFFSET in the TC/UB/CLOCK (1/2) Menu screen (only for RS-422A)
To edit DV signals, set the timing for the time code to be output to the editing controller form BR-
DV6000.
Usually, this item is set to OFF.
Ⅵ To edit with DV connection
• Set the player input selection to other than DV.
• If the bump function is to be used, operte the funciton from the player. In the case of an editing
remote controller for which the funciton is operated from the recorder, set the preroll time to at least
10 seconds.
• For both player and recorder, set REM STOP SEL to PB.
E-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ Setting the TIME CODE mode (used as editing recorder)
It is necessary to set time code parameters (when it is used as a recorder) and time code recording
mode in accordance with system.
• INTERNAL-REGEN (Regeneration mode)
Time code will be continued to the time code information of the prerecorded tape.
This is the factory’s default setting. This mode is especially intended for the following situations:
• When using the JVC bus remote controller.
• When not interfacing with external sync.
• INTERNAL-PRESET-FREERUN (Free run mode)
Please choose this mode when you want to preset time code from the RS-422A remote controller.
Please note that time code will be discontinued when an external sync signal is not input to both the
editing recorder, player and the editing controller.
• INTERNAL-PRESET-RECRUN (REC RUN mode)
Select this mode if the RM-G800 TC insert function is to be used.
Ⅵ Setting of RM-G820
PREROLL
EDIT TIMING
BUMP
: It is recommended that at least 7 seconds be set.
: -5 frames
: ON
BUMP SELECT : PLAYER
Counter : LTC
Making prerecorded base tape (used as editing recorder)
Both in the case of analog interface editing: To make a prerecorded tape with the appropriate audio
mode to your liking.
And in the case of DV interface editing
: To make a prerecorded tape with the audio mode corre-
sponding with the source tape.
It is necessary to record continuous time code information on a prerecorded tape.
Please refer to “Presetting the time code” section. (☞ Page 59)
Note
When the BR-DV6000 is used as an editing recorder we recommend using tapes that were recorded
in this machine.
Confirmation by preview editing
Before performing editing, it is possible to check the edit-in and –out points in preview editing.
It does not work with the JVC bus interface editing controller.
If the editing controller has a learn function, it is recommended that this function is used.
To activate the capstan bump function, it is necessary to set sufficient pre-roll time. It is recommended
that a minimum of 7 seconds is set.
Note
• During preview or editing the E-to-E picture and audio will appear a few frames different from the
actual record point. However, the final images will be recorded with correct timing on the tape.
• When the JVC bus interface editing controller is used, the monitor output picture of the recorder
always shows the player. It is not possible to check PB/EE switching at edit points.
Perform editing
After setting edit points, starts editing by using perform button on the editing controller.
Note
• Occasionally, E-to-E pictures may be disturbed during editing but the recordings will be unaffected.
• Try to avoid repeat editing on the same section of tape as, to do so may, after many edits eventually
cause induced noise at the edit points.
E-67
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT
– Using a non-linear editing system –
Tape contents of BR-DV6000 are captured by a non-linear editing system and the non-linear edited
contents are recorded on BR-DV6000.
:Connection:
Analog video
Analog audio
VIDEO OUT
AUDIO OUT
COMPONENT
VIDEO
REMOTE2
LINE
IN
Y/C
IN
R-Y
B-Y
Y
AUDIO
OUT
CH 1/3
CH 2/4
OUT
IN
RS-422A
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
REMOTE 1 (9P)
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
REMOTE1
DC12V
Non-linear system
DV terminal
IEEE1394 (image, audio, control)
Control with RS-422A
(Analog signals)
Control with the DV terminal
(Digital signals)
:Setting:
:Setting:
Ⅵ Set the REMOTE/LOCAL switch on the
Ⅵ REMOTE (1/2) Menu screen
● Set REMOTE SEL DV to ON or LOC+REM.
front panel to REMOTE.
Ⅵ REMOTE (1/2) Menu screen
Set this item to ON if it is to become enabled
only when the REMOTE/LOCAL switch on the
front panel is set to REMOTE.
Set this item to LOC+REM if it is to become
enabled regardless of the position of the RE-
MOTE/LOCAL switch.
• Set REMOTE SEL 9-PIN to “ON”.
Ⅵ REMOTE (2/2) Menu screen
● REMOTE FF/REW MODE:
Use this item to select the operation to be per-
formed if the FF or REW command is received
during playback. (FF/REW or Search)
If the search operation is not performed prop-
erly, set it to “SEARCH”.
● CONTROLLER TYPE (in the REMOTE 2/2
Menu screen):
Set this item to “TYPE1”.
Memo
If the time code of BR-DV6000 is not displayed correctly when the non-linear side moves one frame
forward or backward, set the STILL mode to “FRAME.”
E-68
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS
– Structure of the Menu screens –
The Menu screens are displayed on the monitor or the LCD. They are structured with multiple
layers.
SYSTEM (1/2) menu
SYSTEM (2/2) menu
–
–
–
S
Y
S
C
T
E
M
[
1
/
2
]
–
–
–
–
–
–
–
–
–
S
Y
S
T
E
M
[
2
/
2
]
–
–
–
–
–
–
F
S
S
B
L
Y
T
A
O
O
N
L
C
N
N
,
C
/
K
G
G
S
.
P
P
P
E
A
L
D
R
U
U
E
M O
G
C
E
V
E
S
S
Y
T
M O
T
A
2
O
5
F
V
O
U
N
F
M
.
A
F
T
D
F
I
A
R
F
O
D
I
C
N
E
E
P
B
A
R
A
I
N
X
I
M O
W R
D
I
E
T
O
O
O
O
O
O
P
C
0
P
N
F
F
F
A
A
0
E
O
F
F
U
D
I
I
E
M
M
D
C
D
P
P
E
/
C
U
G
E
L
E
N
D
L
C
E
E
E
E
E
.
R
R
O
P
F
D
P
C
C
T
A
A
I
T
T
O
N
I
F
F
F
L
N
0
A
A
K
T
N
D
L
I
E
N
E
O
L
C
A
K
Y
L
M O
V
R
D
T
M
E
A
V
O
“
”
A
F
E
U
N
I
R
N
P
E
E
A
P
X
G
E
T
E
T
P
B
D
R
H
B
Y
O
A
S
R
K
E
T
M
T
E
I
T
N
E
G
R
C
0
E
0
L
0
A
A
E
K
U
C
REMOTE (2/2) menu
REMOTE (1/2) menu
–
–
–
R EMO T E
[
1
/
2
]
–
–
–
–
–
–
R
E
M O
T
E
[
2
/
2
]
–
–
–
R EMO T E S E
R EMO T E S E
R EMO T E S E
R EMO T E S E
R EMO T E S E
L
L
L
L
L
9
P
ON
ON
ON
ON
ON
R
R
P
S
C
F
E
E
B
Y
O
O
A
M
M
F
S
T
H
R
F
T
A
R
O
S W
B
/
R
P
T
N
L
E W M O
D
E
F
E
O
O
T
F
E
F
N
Y
F
/
R
E W
S E R
D V
O
R
O
L
S
D
Z
E
E
A
L
L
.
S
C
T
T
E
A
I
E
Y
O
L
J
V C
N
N
O
G
I
E
T
S
N
N E T
ON
R
P
F
E
1
L OC A
L
F U N C T
L
I
S T P + E
S E C
J
T
O
P R E RO L
N E X T P A G E
P A G E B A C K
7
P
A
C
K
AUDIO menu
Top menu
–
–
–
M
E
N
U
–
–
–
–
–
–
A
U
D
I
O
–
–
–
S
R
A
V
T
Y
E
U
I
S
T
E
T
O
O
B
L
M
E
.
.
.
.
.
A
A
A
A
V
P
U
.
D
O
D
D
F
I
U
I
O
T
O
O
D
M O
D
A
P
T
E
R
U
4
O
R
–
8
N
C
2
K
M O
S
I
E
N
U
C
T
L
H
E
D
D
/
S
T
V
I
I
.
U
U
.
S
V
E
L
A
0
E
U
P
.
.
I
O
d
B
C
I
/
A
R
C
Y
K
C
L
L
O
S
P
I
C
E
A
P
K
T
C
.
.
.
K
.
.
.
A
E
E
B
O
N
D
N
A
G
A
C
K
E
W O
I
T
C
O
N
F
I
G
.
.
M O
E
E
X
VIDEO menu
–
–
–
V
I
D
S
E
E
O
L
–
–
–
V
S
B
P
I
D
T
A
G
E
O
U
K
I
N
N
U
C
P
T
R
K
U
S
S
T
C
T
Y
O
O
/
F
F
C
F
F
E
L
A
P
B
(
)
Normal screen
C
E
B
A
TC/UB/CLOCK (1/2) menu TC/UB/CLOCK (2/2) menu
CLOCK ADJUST menu
–
–
–
T
C
/
U
B
/
C
L
O
C
K
(
1
/
2
)–
–
–
–
–
–
T
T
C
/
U
L
B
)
/
C
L
O
C
K
(
2
/
2
)–
–
–
–
–
–
C
L
O
C
K
A
D
J
U
S
T
0
0
–
2
0
–
/
–
1
0
D
T
P
A
I
A
T
M
G
E
E
E
0
0
/
:
2
0
2
0
T
T
T
N
D
T
T
N
P
C
C
C
D
F
C
C
E
A
G
G
G
F
S
S
O
E
U
L
D
(
R
E
E
N
P
I
E
G
C
C
C
E
T
I
N
E
E
–
N
F
F
T
G
C
–
E
E
-
R
N
R
N
A
N
L
U
D
C
P
-
B
T
O
G
I
(
P
E
A
A
A
C
D
C
:
R
R
–
A
L
A
E
C
E
R
O
F
F
B
A
C
K
M O
U
K
J
K
U
S
T
.
.
/
D
I
U
F
F
T
P
F
P
B
T
A
C
T
E
K
S
L
A
C
)
T
)
B
B
D
O
T
E
(
O
O
O
L
S
A
A
E
F
F
X
G
DISPLAY (1/2) menu
DISPLAY (2/2) menu
–
–
–
D
I
S
P
N
L
A
S
Y
S
[
1
/
2
]
–
–
–
–
–
–
O
D
E
A
I
D
D
E
M
T
I
S
P
L
A
Y
[
2
/
2
]
–
N
N
N
A
N
N
D
4
–
–
T
V
T
T
A
E
D
T
P
I
M
R
P
M
D
I
E
C
E
O
O
O
D
O
O
D
2
L
L
C
C
C
C
I
O
E
A
D
D
D
D
S
U
X
G
B
C
C
A
L
R
H
O
U
A
E
P
B
I
G
H
T
A
A
O
E
0
0
0
3
O
L
T
A
I
M O
R
R
N
T
Y
R
A
A
O M
E
E
I
T
E
E
E
A
E
F
O
L
L
K
I
N
.
L
T
O
R
S
F
T
F
/
D
T
E
+
T
M
Y
L
0
M
I
N
R
U
D
A
I
O
N
F
Y
Y
C
O
.
E
E
D
C
N
P
P
N
T
N
I
N
T
T
A
T
P
E
K
O
S
I
.
O W E
-
R
T
S
S
B
.
.
/
H
M M
O
/
R
Y
G
C
M
G
U
E
A
E-69
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS
– Setting the menus –
The functions of BR-DV6000 are configured in the Menu screens. The configured settings are
saved in the memory of BR-DV6000 and retained even after power off.
1.4.
2. -1, 3. -1, 3
MENU button
8 button
OPERATE
PLAY
2. -2, 3. -2, 4
SET button
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
DISP
SET
PROFESSIONAL
SEARCH+
CUE UP
; button
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
2. -1, 3. -1, 3
2. -2, 3. -2
9 button
: button
TOP MENU screen
Perform the menu settings while viewing the display on the moni-
tor connected to the VIDEO MONITOR OUT terminal or the LCD.
–
–
– M E N U
–
–
–
S
Y
S
T
E M
.
.
.
.
R E M O T
E
.
Ⅵ Set BR-DV6000 to the STOP or STILL mode.
A U D
I
O
.
V
T
D
I
C
I
D E O
/
S
.
.
C
Y
U B
P
/
L
L
O C K
.
.
.
.
1.Displaying the TOP MENU screen.
L
A
S
P
I
E
T
N E T W O R K
M O V
E
A C K C O N
F
I
G
.
.
Press the MENU button.
I
T
E
C
P
.
.
X
I
2. Displaying the Menu screen items for setting.
1 Press the 8 or 9 button to bring the cursor to the Menu screen
item for setting.
Menu items
Cursor
2 Press SET or the : button.
Select EXIT of theTOP MENU screen to return to the normal
screen.
Cursor
Item
Setting value
3. Setting the Menu item for setting.
–
–
–
S
L
Y
S
T
T
E M
[
1
/
2
]
–
–
–
–
–
–
S
S
B
L
L
“
Y N C
S
.
E
E C
A U T O
1 Press the 8 or 9 button to bring the cursor to the Menu screen
T
L
/
F
A D V M O D E
2
O F
5 M
F
I
O F
N D
A C K U P R E C
T
T
I
I
M E
M E
F
I
item for setting.
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
M O D E
.
A D V
2 Press SET or the : button.
¥ The selected setting value blinks and becomes available
for changing.
”
A
E
Y
F
U N C
.
N D E
X
R E
N E
P
X
E
T
T
P
B
M O D E
F
A G E
A C K
P
A G E
3 Press the 8 or 9 button to change the value.
4 Press the SET button to confirm the change.
¥ Blinking stops and the new value is confirmed.
5 Repeat steps 1 - 4 and continue setting as necessary.
E-70
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM (1/2) Menu screen
Ⅵ To display the Menu screen at the next level, bring the
cursor to NEXT PAGE and press the SET or t button.
–
–
–
S
L
Y
S
T
T
E M
[
1
/
2
]
–
–
–
–
–
–
S
S
B
L
L
“
Y N C
S
.
E
E C
A U T O
T
L
/
F
A D V M O D E
2
O F
5 M
F
I
O F
N D
A C K U P R E C
T
T
I
I
M E
M E
F
I
Ⅵ To return to the previous Menu screen, do one of the
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
M O D E
.
A D V
following actions.
• Press the 8 button.
Or
”
A
E
Y
F
U N C
.
N D E
X
R E
N E
P
X
E
T
T
P
B
M O D E
F
A G E
A C K
P
A G E
Select PAGE BACK and press the SET or : button.
4.To return to the normal screen, do one of the following ac-
tions.
–
–
–
S
Y
S
T
E
E M
[
2
/
2
]
–
–
–
–
–
–
• Press the MENU button.
Or
Select EXIT in the TOP MENU screen and press the SET or :
button.
D C
I
N
X
I
M O D E
W R
O P
O N
O F
O F
E
O F
F
I
N D E
I
I
E
T
R E
R E
P
P
/
L
L
C A
C A
I
T
T
N
O N
D E
F
F
L
I
L
A
Y
P
F
B
D V
P
A
A C T O R Y
S
E
T
T
I
T
N G
E R
C A N C E
L
0
D R U M H O U R M E
0
0
0
0
0
P
A G E
B
A C K
SYSTEM (2/2) Menu screen
E-71
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS
– Description of the Menu screens –
In the following description of the Menus, ⅷ indicates factory settings.
TOP MENU screen
Item
SYSTEM
Setting
Description
—
Displays the menus related to the operating system of BR-DV6000.
It also displays factory setting and the drum hour meter.
—
—
—
—
REMOTE
AUDIO
Displays the menus related to the remote controller.
Displays the menus related to the audio.
Displays the menus related to the video.
VIDEO
TC/UB/CLOCK
Displays the menu for setting time codes.
Also displays the date/time setting screen.
—
—
DISPLAY SET
Displays the menus related to the monitor connected to theVIDEO
MONITOR OUT terminal and the LCD.
NETWORK
PACK CONFIG
Displayed if the network board SA-DV6000 (sold separately) is
installed.
For details, refer to the user’s guide for SA-DV6000.
—
—
MOVIE CLIP
EXIT
Return to the normal screen.
SYSTEM Menu screens
The SYSTEM Menu consists of the following two screens (1/2 and 2/2).
Ⅵ SYSTEM (1/2) menu
Item
Setting
Description
SYNC SELECT ⅷ AUTO
Use this item to select the synchronization signal if there is no
input of synchronization signal to the SYNC IN terminal during
playback.
EXTERNAL
AUTO
: Input video signal
EXTERNAL : Internal synchronization signal
(For details : ☞ Page 29)
STL/F.ADV
MODE
FIELD
Use this setting to select the still image for the STILL mode or
frame-advance playback.
1ST
ⅷ 2ND
FRAME
FIELD
: Displays the field image. During frame-advance
playback, it displays the 1st and 2nd field images
alternately.
1ST
2ND
: Displays the 1st field image.
: Displays the 2nd field image.
: Displays the frame image.
FRAME
Memo
Images from the DV terminal will be the 1st field images regard-
less of the settings.
E-72
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM Menu screens (continued)
Item
Setting
Description
BACKUP REC
TIME
ⅷ OFF
For setting backup recording time with DV input signals accord-
ing to the tape length of the source unit:
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
OFF
: No backup recording
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
: For a 30-minute source unit recording tape
: For a 60-minute source unit recording tape
: For a 80-minute source unit recording tape
: For a 120-minute source unit recording tape
: For a 180-minute source unit recording tape
: For a 270-minute source unit recording tape
(☞ Page 45 “Backup recording function”)
Memo
● This item is fixed to OFF when REPLICATION in the SYSTEM
(2/2) Menu screen is set to DV. If this is set to other than OFF,
REPLICATION cannot be set to DV.
● Set this item to “OFF” if DV REC TRIGGER of GY-DV5000 is set to
ON.
LONG PAUSE
TIME
30SEC
1MIN
2MIN
3MIN
Select the time when BR-DV6000 enters the TAPE PROTEC-
TION mode if the unit has stayed at still, stop or recording pause
for a prolonged period of time.The TAPE PROTECTION mode in
at STILL can be selected from LONG PAUSE MODE:
30SEC : 30 seconds
ⅷ 5MIN
1MIN : 1 minute
2MIN : 2 minutes
Memo
3MIN : 3 minutes
5MIN : 5 minutes
To prevent the video head from clogged or the tape from being
damaged, set as short a time as possible.
LONG PAUSE
MODE
ⅷ F.ADV
STBY-OFF
For selecting the action when BR-DV6000 stays at still for a long
time.
In the case of RECORDING PAUSE or STOP, it enters the
standby-off status:
F.ADV
: Frame-advances BR-DV6000 five times in the for-
ward direction. On the 6th attempt, this mode
stops it.
STBY-OFF : Stops BR-DV6000.
;,: KEY
FUNC.
INDEX
ⅷ VAR
For selecting the function for the SEARCH+/: button and
SEARCH–/; button.
INDEX
VAR
: Performs index search. (☞ Page 52)
: Changes the search speed during a search.
(☞ Page 50)
REPEAT MODE ⅷ OFF
For enabling/disabling repeat playback and selecting the type of
repeat playback.
INDEX
V. END
TAPE END
OFF
: No repeat playback
INDEX
: Repeat playback between the positions where
index signals are recorded.
: Repeat playback from the beginning of the tape
to the position where video signal recording ends.
V. END
TAPE END : Repeat playback from the beginning to the end of
the tape.
NEXT PAGE
PAGE BACK
For displaying the SYSTEM (2/2) Menu screen.
For returning to the TOP MENU screen.
E-73
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS – Description of the Menu screens – (continued)
Ⅵ SYSTEM (2/2) Menu
Item
Setting
Description
ⅷ OPE OFF
OPE ON
DC IN MODE
For selecting the action to perform when the power is supplied to the DC IN
terminal.:
OPE OFF
OPE ON
Memo
: Sets BR-DV6000 to the OPERATE OFF mode.
: Sets BR-DV6000 to the OPERATE ON mode.
When the TIMER switch is set to REC or PLAY, the OPERATE ON mode
becomes effective regardless of the setting of this item.
For enabling/disabling index signal recording.
OFF
ⅷ ON
INDEX WRITE
REPLICATION
OFF
ON
: No index signal
: Select here to record index signals.
It records an index signal automatically at the position
where recording starts.
For enabling /disabling output of REC commands from the SERIAL REMOTE
OUT terminal or the DV terminal when BR-DV6000 is set to the PLAYBACK
mode.
ⅷ OFF
SERIAL
DV
OFF
SERIAL
: No output
: Outputs from the SERIAL REMOTE OUT terminal. Use
this setting when the SERIAL REMOTE OUT terminal is
used for dubbing by another machine.
DV
: Outputs from the DV terminal. Use this setting when the
DV terminal is used for dubbing by another machine.
Memo
This item cannot be set to DV when BACKUP REC TIME in the SYSTEM (1/
2) Menu screen is set to other than OFF.
With this item set to DV, BACKUP REC TIME is fixed to OFF.
For setting the output timing of the REC command from the SERIAL RE-
MOTE OUT terminal or the DV terminal when BR-DV6000 is set to the PLAY-
BACK mode.
ⅷ OFF
1SEC
2SEC
3SEC
4SEC
5SEC
ⅷ OFF
ON
REPLICATE
DELAY
OFF
: Outputs when the unit is set to the PLAYBACK mode.
1SEC - 5SEC : Delays output timing by the set time (seconds).
For enabling/disabling operation lock.
OPERATION
LOCK
OFF
: Turns off operation lock and the operation buttons of BR-
DV6000 can be used.
ON
: Turns on operation lock. The operation buttons and slide
switches of BR-DV6000 are disabled except the OPER-
ATE ON button and MENU operation. (
☞
Page 37)
Set this menu according to the DV input signal and the signal format of the
tape to be played.
ⅷ PAL
NTSC
PB/DV IN
PAL
: Select here when the signal format is PAL.
: Select here when NTSC signals are input to the DV termi-
nal or when a tape with NTSC signals recorded is played.
NTSC
Memo
• With this menu set to NTSC, analog signals cannot be recorded.
• If the setting is changed, images cannot be produced properly for a while
after the change.
• Signal formats cannot be converted.
• If this item is set to NTSC, BR-DV6000 cannot be used as the player or
recorder of an editing system.
For enabling /disabling the factory setting for the Menu screens.
ⅷ CANCEL
EXECUTE
FACTORY
SETTING
CANCEL
EXECUTE
For displaying the time of drum usage.
: Disable the factory setting
: Enable the factory setting
DRUM HOUR
METER
PAGE BACK
* The cursor cannot be brought to this item.
For returning to the SYSTEM (1/2) Menu screen.
E-74
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE Menu screens
The REMOTE Menu consists of the following two screens (1/2 and 2/2).
Ⅵ REMOTE (1/2) Menu screen
Item
Setting
OFF
Description
REMOTE SEL
9P
For enabling/disabling the REMOTE1 (9-PIN) terminal when the
REMOTE/LOCAL switch on the front panel is set to REMOTE.
ⅷ ON
OFF
ON
: Control through RS-422A disabled
: Control through RS-422A enabled
Memo
When the RS-232C board SA-K46U (sold separately) is installed, the name of this item changes
to REMOTE SEL 232.
Use this setting to enable/disable the control via RS-232C when the REMOTE/LOCAL switch
on the front panel is set to REMOTE.
REMOTE SEL
SER
For enabling/disabling control via the SERIAL REMOTE IN ter-
minal.
OFF
ⅷ ON
LOC+REM
OFF
: Control disabled regardless of the settings of the
REMOTE/LOCAL switch
ON
: Control enabled only when the REMOTE/
LOCALswitch is set to REMOTE.
LOC+REM : Control enabled regardless of the settings of the
REMOTE/LOCAL switch.
REMOTE SEL
DV
For enabling/disabling control via the DV terminal.
OFF
ⅷ ON
LOC+REM
OFF
: Control disabled regardless of the settings of the
REMOTE/LOCAL switch.
ON
: Control enabled only when the REMOTE/
LOCALswitch is set to REMOTE.
LOC+REM : Control enabled regardless of the settings of the
REMOTE/LOCAL switch.
REMOTE SEL
JVC
For enabling/disabling the REMOTE 2 (12-PIN) terminal when
the REMOTE/LOCAL switch on the front panel is set to REMOTE.
OFF
ⅷ ON
OFF
ON
: Control through the JVC bus disabled
: Control through the JVC bus enabled
REMOTE SEL
NET
For enabling/disabling control via the network board SA-DV6000
(sold separately).
OFF
ⅷ ON
LOC+REM
OFF
: Control disabled regardless of the settings of the
REMOTE/LOCAL switch.
ON
: Control enabled only when the REMOTE/
LOCALswitch is set to REMOTE.
LOC+REM : Control enabled regardless of the settings of the
REMOTE/LOCAL switch.
E-75
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS – Description of the Menu screens – (continued)
REMOTE Menu screens (continued)
Ⅵ REMOTE (1/2) Menu screen (continued)
Item
Setting
Description
LOCAL
FUNCTION
NO KEY
EJECT
ⅷ STP + EJT
ALL KEYS
For selecting the buttons of BR-DV6000 to be enabled in remote-
controlling it with the REMOTE (1/2) terminals or the SERIAL
REMOTE terminal:
NO KEY
EJECT
: No button enabled.
: Only the EJECT button enabled.
STP + EJT : Only the STOP button and the EJECT button are
enabled.
ALL KEYS : All operation buttons are enabled.
Memo
If OPERATION LOCK in the SYSTEM (2/2) Menu screen is set
to ON, the buttons on BR-DV6000 will be disabled regardless of
the setting here.
PREROLL
3SEC
5SEC
ⅷ 7SEC
10SEC
For setting the preroll time of BR-DV6000 in remote-controlling it
with the REMOTE 1 terminal. Setting done with the editing re-
mote controller prevails over other settings:
3SEC : 3 seconds
5SEC : 5 seconds
7SEC : 7 seconds
10SEC : 10 seconds
Memo
To enhance editing precision, please set it to at least 7 seconds.
NEXT PAGE
PAGE BACK
For displaying the REMOTE (2/2) Menu screen.
For returning to the TOP MENU screen.
Ⅵ REMOTE (2/2) Menu screen
Item
Setting
Description
REM FF/REW
MODE
ⅷ FF/REW
SEARCH
For setting the action to be performed when the 9-PIN REMOTE
terminal, 12-PIN REMOTE terminal, RS-232C terminal or DV
terminal received an FF/REW command:
FF/REW
: Sets BR-DV6000 to perform FF/REW when an
FF/REW command is received. Normal setting.
: Sets BR-DV6000 to perform searching when an
FF/REW command is received. Use this setting
if the search (cue up) function does not work prop-
erly.
SEARCH
REM STOP SEL ⅷ EE
For setting the action to be performed when the 9 PIN REMOTE
terminal, 12-PIN REMOTE terminal, RS-232C terminal or DV
terminal received a STANDBY ON command:
PB
EE
: Sets BR-DV6000 to the EE mode.
(It goes into the STOP mode.)
PB
: Sets BR-DV6000 to the PLAY mode.
(It goes into the STILL mode.)
E-76
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ REMOTE (2/2) Menu screen (continued)
Items
Setting
Description
REMOTE menu
PB START
DELAY
ⅷ 0F
For adjusting the edit timing. With the remote controller in use, if
the start points of edit are not concurrent, adjust the playback
startup timing:
|
15F
0F
: No correction.
1F to 15F
: Delays the timing by the number of frames set by
the user. When BR-DV6000 is connected to an
editing remote controller with no bump function,
use this setting to adjust the editing precision.
SYNCHRONI-
ZATION
OFF
ⅷ ON
For enabling/disabling the bump function when BR-DV6000 is
connected to an editing remote controller:
OFF
ON
: No synchronization.
: Performs synchronization. The editing precision
is enhanced. Please set the pre-roll time to at least
7 seconds.
CONTROLLER ⅷ TYPE1
For setting the type of controller to be connected when remote
control is enabled with the RS-422A interface:
SEL
TYPE2
TYPE3
TYPE4
TYPE5
TYPE6
TYPE7
TYPE1
TYPE2
: RM-G820
: RM-G860 (set the preroll time to at least 10
seconds)
TYPE3
TYPE4
: AG-A850
: RM-450,PVE-500
TYPE5 - TYPE7 : (Not in use)
FOOT SW
ⅷ OFF
For setting when an external switch (e.g., a footswitch) is con-
nected to the SERIAL REMOTE terminal. Before operating an
external switch (footswitch) with L EDGE or H EDGE, turn BR-
DV6000 to the RECORDING PAUSE or RECORDING mode:
L EDGE
H EDGE
L LEVEL
OFF
: For when the external switch is not used.
: Recording and recording pause is switched at the
LOW edge of the external switch signal.
L EDGE
H EDGE
L LEVEL
: Recording and recording pause is switched at the
HIGH edge of the external switch signal.
: Record at the LOW edge and pause recording at
the HIGH edge of the external switch signal.
PAGE BACK
Return to the REMOTE (1/2) Menu screen.
E-77
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS – Description of the Menu screens – (continued)
AUDIO Menu screen
Item
Setting
ⅷ 48 K
Description
AUDIO MODE
For selecting the audio sampling frequency for recording.
32 K
48 K
: Records at 48 kHz. It records in the 2-channel
stereo mode. No audio dubbing allowed.
: Records at 32 kHz. It records in the 4-channel
mode.To perform audio dubbing on CH3 and CH4
later, use this setting.
32 K
Memo
Setting of this item is not required for DV signal input.
A.OUT AT
SEARCH
OFF
ⅷ ON
For enabling/disabling audio output from this AUDIO OUT termi-
nal during searches.
OFF
ON
: Output off.
: Output on.
AUDIO INPUT
SEL
XLR
ⅷ RCA
Use this setting when the XLRIN board SA-X61U (sold separately)
is installed. For selecting the audio input terminal.
XLR
RCA
: Audio input terminal of SA-X61U
: AUDIO INPUT terminal of the unit
AUDIO OUT
LEV
–12 dB
ⅷ –20 dB
For selecting the level for playback audio output.
–12 dB
: Select here to reduce the analog sound output
level. It will be reduced by 8 dB.
: Usually, this setting is used.
–20 dB
V.FADE
OFF
ⅷ ON
For enabling/disabling the V.Fade function, which reduces sound
noise in playback that is produced at jointed parts of recording.
OFF
ON
: V.FADE function disabled.
: V.FADE function enabled.
PAGE BACK
For returning to the TOP MENU screen.
E-78
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO Menu screen
Item
Setting
ⅷ Y/C
Description
VIDEO
INPUT SEL
For selecting the input video signals when the INPUT SELECT
switch on the front panel is set to Y/C (CPN).
: YC separate signals
COMPONENT : Component video signals
COMPONENT
Y/C
SET UP
(NTSC)
ⅷ OFF
ON
For enabling/disabling the application of setups to analog video
signals (composite, Y/C and component).
(During recording and playback)
OFF
ON
Memo
: Does not apply setups.
: Applies setups.
The application of setups on playback or recorded video signals
must match the setting of SET UP. Otherwise, if dubbing is re-
peatedly performed, the hue and brightness of the video may not
appear normal.
BLACK
BURST
ⅷ OFF
ON
For enabling/disabling output of black burst signals of the built-in
signal generator. (When analog input is selected)
OFF
ON
: Output off
: Output on. In the RECORDING mode, black burst
signals will be recorded.
PAGE BACK
For returning to the TOP MENU screen.
E-79
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS – Description of the Menu screens – (continued)
TC/UB/CLOCK Menu screens
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
Ⅵ TC/UB/CLOCK (1/2) Menu screen
Item
Setting
Description
TCG SOURCE
ⅷ INTERNAL
EXTERNAL
For selecting the source of the time code generator.
INTERNAL : BR-DV6000 built-in time code generator
EXTERNAL : Time code generator connected to the TIME
CODE IN terminal
TCG SELECT
TCG MODE
PRESET
For selecting the time code generator mode.
ⅷ REGEN
PRESET
REGEN
: PRESET mode
: REGENERATION mode
ⅷ REC-RUN
FREE-RUN
For selecting the running mode of the time code generator.
* Select here in the PRESET mode.
REC-RUN
: RECORD RUN mode
FREE-RUN : FREE RUN mode
NDF/DF
(NTSC)
NON DROP
ⅷ DROP
For selecting the framing mode of the time code generator.
(NTSC only)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP
: DROP-FRAME mode
DF BIT (PAL)
ⅷ OFF
ON
For selecting whether to record drop-frame bits.(Only for E model)
OFF
ON
: No recording
: Recording
TC DUPLICATE ⅷ OFF
AUTO
NON DROP
For selecting the type of time code to be recorded with DV signal
input.
OFF
: Records time code of the built-in time code gen-
erator of BR-DV6000
AUTO
: Records the time code input to the DV IN termi-
nal.The framing mode of the time code will be set
automatically to the framing of the time code in-
put.
NON DROP : Records the time code input to the DV IN termi-
nal.The framing mode of the time code is fixed to
non-drop framing. (NTSC only)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (NTSC only)
TC OFFSET
ⅷ OFF
For setting up the timing when time code data from the 9-PIN
REMOTE terminal of BR-DV6000 to the editing remote controller
are output.
+1F
+2F
–2F
–1F
OFF
+1F
+2F
–2F
–1F
: Normal setting.
: Sets the timing to 1 frame faster.
: Sets the timing to 2 frames faster.
: Sets the timing to 2 frames slower.
: Sets the timing to 1 frame slower.
NEXT BACK
PAGE BACK
For displaying the TC/UB/CLOCK (2/2) Menu screen.
For returning to the TOP MENU screen.
E-80
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ TC/UB/CLOCK (2/2) Menu screen
Item
Setting
Description
For selecting whether to record user’s bit. (Only for E model)
U-BIT (PAL)
OFF
ⅷ ON
OFF
ON
: No recording
: Recording
For selecting whether to record date/time data on the tape.
DATE REC
ⅷ OFF
ON
OFF
ON
: No recording
: Recording date/time on-screen display descrip-
tion.
For this to be enabled, the following settings are required.
• Set DISPLAY in the DISPLAY (1/2) Menu screen to ON.
• Set TIME/DATE in the DISPLAY (2/2) Menu screen to other
than OFF.
Memo
With DV signal input, date/time data are not recorded.
CLOCK
ADJUST
For displaying the date/time setting screen
For setting, refer to page 40 “Setting date/time”.
PAGE BACK
For returning to the TC/UB/CLOCK(1/2) Menu screen .
E-81
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS – Description of the Menu screens – (continued)
DISPLAY Menu screens
The DISPLAY menu consists of 2 screens (1/2 and 2/2)
Ⅵ DISPLAY (1/2) Menu screen
Item
Setting
MAX
+4
+3
+2
+1
Description
LCD BRIGHT-
NESS
For adjusting the brightness of the LCD.
A bigger value increases brightness.
LCD CHROMA
For adjusting the concentration level of the color of the LCD.
A bigger value increases color concentration.
ⅷ 0
LCD CONTRAST
For adjusting the LCD contrast.
A bigger value increases contrast.
–1
–2
–3
–4
MIN
LCD AUTO OFF
For selecting whether to turn off the LCD display automatically
when it is not to be used for a long time.
OFF
ⅷ 30MIN
1HOUR
2HOUR
OFF
: No auto OFF
30MIN
1HOUR
2HOUR
Memo
: Auto OFF after 30 minutes
: Auto OFF after 1 hour
: Auto OFF after 2 hours
During recording or playback, the LCD display stays on regard-
less of this setting.
DISPLAY
For turning on/off on-screen status display on the monitor con-
nected to the VIDEO MONITOR OUT terminal or the LCD.
OFF
ⅷ ON
AUTO
OFF
: No on-screen status display. Only video is dis-
played.
ON
: Always shows on-screen status display.
: Shows on-screen status display for about 4 sec-
onds during mode changes.
AUTO
COUNTER
POSI.
For selecting the counter display position (CTL counter, time code
and user’s bit) of the monitor or the LCD.
LOWER-R : Lower right
ⅷ LOWER-R
LOWER-L
UPPER-R
UPPER-L
CENTER
LOWER-L
UPPER-R
UPPER-L
CENTER
: Lower left
: Upper right
: Upper left
: Center
NEXT PAGE
PAGE BACK
For displaying the DISPLAY (2/2) Menu screen.
For returning to the TOP MENU screen.
E-82
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ DISPLAY (2/2) Menu screen
Item
Setting
Description
TIME CODE
OFF
ⅷ ON
For enabling/disabling the time code display on the monitor or
the LCD.
OFF
ON
: No display
: Display
VTR MODE
OFF
ⅷ ON
For enabling/disabling theVCR mode on the monitor or the LCD.
OFF
ON
: No display
: Display
TAPE REMAIN
OFF
ⅷ ON
For enabling/disabling the display of the remaining time of the
tape on the monitor or the LCD.
OFF
ON
: No display
: Display
TIME/DATE
OFF
TIME
For enabling/disabling the time/date display on the monitor or
the LCD and selecting the display format.
DATE
OFF
: No display
ⅷ DATE+TM
TIME
: Time display only
: Date display only
: Date/Time display
DATE
DATE+TM
AUDIO INFO.
EDIT INFO.
OFF
For enabling/disabling the display of audio channel or sampling
frequency on the monitor or the LCD.
ⅷ ON
OFF
ON
: No display
: Display
OFF
ⅷ ON
For selecting whether to display the edit mode on the monitor or
the LCD.
OFF
ON
: No display
: Display
DATE STYLE
YY/MM/DD
MM/DD/YY
ⅷ DD/MM/YY
For selecting the date display format.
YY/MM/DD : Year/Month/Day
MM/DD/YY : Month/Day/Year
DD/MM/YY : Day/Month/Year
TIME STYLE
PAGE BACK
ⅷ 24HOUR
12HOUR
For selecting the display style of time.
24HOUR
12HOUR
: 24-hour mode
: 12-hour mode
For returning to the DISPLAY (1/2) screen.
E-83
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– Command tables –
This section provides information on programming VCR operations via the RS-232C interface.
Ⅵ BASIC TABLE
Low
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
High
Cassette
Out
Not
Target
0
Complete Error
ACK
NAK
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Fwd Shtl Fwd Shtl
Fwd Shtl
x10
RevShtl
x10
Play
Stop
Still
Fwd Still
Rev Still
x2
x0.2
Clear
Error with Data
CueUp
In Shift In Shift Out Shift Out Shift Rev Shtl Rev Shtl Rev Shtl
Enter
+
–
+
–
x1
x2
x0.2
In Flag Out Flag In Flag Out Flag
Reset
Go-to
In
Go-to
Out
Memory
Search
In Entry Out Entry
Clear
Memory
Reset
Recall Recall
Status
Sense
Date
Preset
Clock
Preset
Standby Standby
Fwd Field Rev Field
Preroll
Eject
Ff
Rew
Adb
On
Off
Step
Step
CueUp
with Data
Date Data Clock Data
Sense
Edit
On
Fwd Shtl Rev Shtl
Sense
Edit
Off
Full-EE
On
Select
EE On EE Off
Select
Rec
Pause
Adb
Pause
Auto Edit Preview Review
EE Off
Preroll
Tm Sense Sense Sense
Preroll Timer Mode
Preset Preset Preset Tm Preset Select
Rec
Status Tc Data CTL Data In Data Out Data UB Data JVC Status
Sense Sense
Sense
Sense Sense
TC
UB
CTL Data In Data Out Data
Reset
Edit
Memory
Sw Preset
Preset Preset
JVC Tbl 1 Basic
Select Tbl Select
Rec/Dub
Request
Vtr Ind
Ⅵ JVC TABLE1
Low
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
High
Cassette
Out
Not
Target
0
Complete Error
ACK
NAK
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Play
Stop
Still
Clear
Error
In Shift In Shift Out Shift Out Shift
Enter
+
–
+
–
In Flag Out Flag In Flag Out Flag
Go-to
In
Go-to
Out
Memory
Search
In Entry Out Entry
Clear
Memory
Reset
Reset
Recall Recall
Status
Sense
Rom
Version
Operate Operate
On
Off
Date
Preset
Clock
Preset
Standby Standby
Fwd Field Rev Field
Preroll
Eject
Ff
Rew
Adb
On
Off
Step
Step
Date Data Clock Data
Sense Sense
Play After
CueUp
Viss
Fwd
Viss
Rev
Fwd Shtl Rev Shtl
EE Off
Full-EE
On
Memory Tape Rem
Sw Sense Sense
Rec
Pause
Adb
Pause
JVC Status
Sense
Memory
Rec
Device Type
Request
Status Tc Data CTL Data
Sense Sense
Sense
CTL Data In Data Out Data
Reset Preset Preset
Timer Mode
Select
JVC Tbl 1 Basic
Select Tbl Select
Sw Preset
Rec/Dub
Request
Vtr Ind
E-84
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C specifications –
ⅷ 9PIN D-Sub
1
5
9
6
Mode
: Non-synchronous
Character length : 8 bits
Parity check
Start bit
: None
: 1
Pin No. Signal
Operation
Direction of
signal
VCR©PC
Stop bit
: 1
2
3
4
5
6
RxD
TxD
Receive data
Transmit data
Data rate
: 9600bps
VCR†PC
Bit configuration
DTR Data terminal ready VCR†PC
GND Signal grounding
DSR Data set ready
VCR©PC
D0 D1 D2 D3 D4 D5 D6 D7
Memo : “PC” means a controller such as a per-
sonal computer.
Stopping bit
Starting bit
ASCII code table
Use this table to represent the values or alphabets in ASCII with the RS-232C interface.
0
1 2
3
4
5
P
6
7
p
q
r
s
t
u
v
w
x
y
z
8
9
A B C D E F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
SP 0
1
2
3
4
5
6
7
8
9
A Q a
B R b
C S c
D T d
E U e
F V f
G W g
H X h
I
J
Y i
Z j
K
L
M
N
O
k
l
m
n
o
E-85
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands –
An optional RS-232C interface board SA-K46U can be installed to BR-DV6000 and connected to a
personal computer. Data transmitted and received via the RS-232C interface enables the PC to
control the VCR and gather status and operating information.
Ⅵ Preparation
To control the VCR by the RS-232C interface, the following settings are required.
• Set REMOTE SEL 232 in the REMOTE (1/2) Menu screen to ON.
• Set the REMOTE/LOCAL switch on the front panel to REMOTE.
● Command tables
BR-DV6000 is controlled according to the following two command tables (BASIC, JVC-1).
Command
Description
F6
F7
JVC-1 TABLE ON : Hereafter, JVC TABLE-1 is followed.
BASIC TABLE ON : Hereafter, BASIC TABLE is followed. JVC TABLE-1 is turned OFF.
● VCR operation commands
These commands are used to operate the VCR. When a
command is received correctly, theVCR returns ACK (0Ah)
and enters the mode corresponding to the command.
(Example) Playback
Blank “Table” boxes below denote that these com-
mands exist for both command tables.
B : BASIC TABLE,
J1 : JVC TABLE-1
3A
TXD
RXD
0A
Table Command
Description
Table Command
Description
PLAY
: Play
59
GO TO OUT :
3A
FWD x 2
FWD x 0.2
F-STILL
FWD x 9/10
STOP
: 2x play
: 0.2x play
: Pause
: 9(10) x play (PAL)
: Stop
: Shifts the IN point to the
+ direction.
: Shifts the IN point to the
Cues up the point specified with OUT ENTRY
(51) and OUT DATA PRESET (E4).When the
tape is cued, COMPLETE (01) is returned.
When the specified point cannot be found,
NOT TARGET (05) is returned.
B
B
B
B
3B
3C
3D
3E
3F
46
IN SHIFT +
5A
5B
MEMORY
:
Registers the current counter value as
the cue-up point of MEMORY
SEARCH (5B).
IN SHIFT –
47
48
49
– direction.
OUT SHIFT +
OUT SHIFT –
: Shifts the OUT point to
the + direction.
: Shifts the OUT point to
the – direction.
: Reverse play
: 2x reverse play
: 0.2x reverse play
: Pause
MEMORY SEARCH :
Cues up the point specified with MEMORY
(5A). When the tape is cued, COMPLETE
(01) is returned. When the specified point
cannot be found, NOT TARGET (05) is re-
turned.
OPERATE ON
OPERATE OFF
STANDBY ON
STANDBY OFF
PREROLL
REV x 1
REV x 2
REV x 0.2
R-STILL
REV x 9/10
STILL
B
B
B
B
B
4A
4B
4C
4D
4E
4F
50
J1
J1
7B
7C
A0
A1
A2
A3
: Operating mode ON
: Operating mode OFF
: Standby ON
: Standby OFF
: Preroll
: 9(10) x reverse play
: Pause
:
IN ENTRY
Registers the current time as the IN point.
OUT ENTRY
Registers the current time as the OUT point.
IN FLAG RESET
Cancels the registered IN point.
OUT FLAG RESET
Cancels the registered OUT point.
IN FLAG RECALL
Validates the cancelled IN point.
OUT FLAG RECALL:
Validates the cancelled OUT point.
GO TO IN
Cues up the point specified with IN ENTRY
(50) and IN DATA PRESET (E3). When the
tape is cued, COMPLETE (01) is returned.
When the specified point cannot be found,
NOT TARGET (05) is returned.
EJECT
:
:
Ejects the cassette tape.When the tape has
been ejected, CASSETTE OUT (03H) is
returned.
51
52
53
54
55
58
:
AB
AC
AD
FF
:
:
Fast-forwards the tape.
REW
Rewinds the tape.
F-FIELD STEP
Advances one frame.This command should
be transmitted in the Play-Pause mode.
Field-advances when STL/F.ADV MODE is
set to FIELD. Otherwise, this command
frame-advances.
:
:
:
:
AE
R-FIELD STEP
:
Reverses one frame.This command should
be transmitted in the Play-Pause mode.
Field-advances when STL/F.ADV MODE is
set to FIELD. Otherwise, frame-advances.
E-86
Download from Www.Somanuals.com. All Manuals Search And Download.
Table Command
Description
VISS FORWARD :
Table Command
Description
F-SHUTTLE :
B0
J1
J1
B5
Index search in the forward direction.
For the index search position, enter a
3-digit number (001-099) following the
command.
When a 3-digit number has been en-
tered, index search starts.
If ENTER (40H) is transmitted before
all three digits are entered, the remain-
ing digit(s) are considered as“0”(30H),
and index search starts.
Shuttle play. The search speed is
specified by sending the speed code
data after this command (see the ta-
ble below).
Speed code table
(Supported speed only)
Speed code
30h
Search speed
STILL
0.1
0.2
0.33
0.5
1
31h
32h
33h
34h
B1
VISS REV :
J1
Index search in the reverse direction.
For the index search position, enter a
3-digit number (001-099) following the
command.
When a 3-digit number has been en-
tered, index search starts.
35h
36h
2
If ENTER (40H) is transmitted before
all three digits are entered, the remain-
ing digit(s) are considered as“0”(30H),
and index search starts.
37h
38h
39h
3Bh
5
10
20
X0.90
X1.07
B2
CUE UP WITH DATA :
B
3Ch
Use this command to cue up a speci-
fied point on the tape. When the tape
is cued, COMPLETION is returned
and the Pause mode becomes effec-
tive.
To specify a cue point, transmit the
time data (hour:minute:second:frame,
a total of 8 bytes with 2 bytes for each)
following this command. By transmit-
ting ENTER (40H) with the time data,
transmission of lower data becomes
unnecessary. In such a case, “0” is
transmitted. If the specified point can-
not be found, NOT TARGET (05H) is
returned.
CUE UP AND PLAY WITH DATA:
Use this command to cue up a speci-
fied point on the tape. When the tape
is cued, COMPLETION is returned
and the Play mode becomes effective.
To specify a cue point, transmit the
time data (hour:minute:second:frame,
a total of 8 bytes with 2 bytes for each)
following this command. By transmit-
ting ENTER (40H) with the time data,
transmission of lower data becomes
unnecessary. In such a case, “0” is
transmitted. If the specified point can-
not be found, NOT TARGET (05H) is
returned.
3Bh and 3Ch are effective only for B5.
R-SHUTTLE :
Shuttle reverse play.The search speed
is specified by sending the speed code
data after this command (see the ta-
ble above).
B6
B
CO
AUTO EDIT KEY :
Audio editing with the VCR.
• It is required that the editing chan-
nel is selected in [E5: Edit Preset].
• This audio editing command must be
used with [FA: Rec Request].
• Preroll time can be set with [E6:
PrerollTime Preset].Without this set-
ting, the VCR menu switch settings
are followed.
B2
J1
• Upon the completion of auto editing,
the VCR returns [01: Complete].
PREVIEW KEY :
B
C1
Preview with the VCR
• It is required that the editing chan-
nel is selected in [E5: Edit Preset].
• This preview command must be
used with [FA: Rec Request].
• Preroll time can be set with [E6:
Preroll Time Preset]. Without this
setting, the VCR menu switch set-
tings are followed.
• Upon the completion of preview, the
VCR returns [01: Complete].
E-87
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands – (continued)
● Return commands from the VCR
Table Command
Description
When theVCR received commands properly, it returns
the following commands.
B
C2
REVIEW KEY :
Review with the VCR
Command
Description
• It is required that [C0: Auto Edit] is
complete.
• Preroll time can be set with [E6:
Preroll Time Preset]. Without this
setting, the VCR menu switch set-
tings are followed.
COMPLETION :
01
The VCR outputs this command when the
operation specified with Cue Up with Data,
Preroll, Auto Edit, etc. is complete.
• Upon the completion of review, the
VCR returns [01: Complete].
CASSETTE OUT :
The VCR outputs this command when RS-
232C ejected the tape.
03
05
C4
C5
C8
Full EE mode ON
Full EE mode OFF
NOT TARGET :
The VCR outputs this command when the
operation specified with Cue Up with Data/
Preroll failed to be completed.
B
B
SELECT EE ON :
Input signal check for the editing chan-
nel selected in [E5: Edit Preset].
ACK :
0A
This command is returned when a defined
command is received.
C9
CA
SELECT EE OFF :
EE check release.
REC :
● Error commands
These are commands that are returned when trans-
mitted data cannot be received by the VCR properly.
Commands that release errors are also available.
Recording.This command is transmit-
ted after transmitting REC/DUB RE-
QUEST.
CB
CC
CD
REC PAUSE :
Record pause.This command is trans-
mitted after transmitting REC/DUB RE-
QUEST.
Command
Description
ERROR :
02
This command is returned when theVCR re-
ceives an invalid command after the second
byte of a multi-byte command. In this case,
even if other commands are sent continu-
ously, no command can be accepted. How-
ever, status sense codes can be received.
To release errors, use the following com-
mands.
A.DUB :
Audio dubbing.This command is trans-
mitted during A.DUB PAUSE after
transmitting REC/DUB REQUEST.
A.DUB PAUSE :
Audio dubbing pause. This command
is transmitted during audio dubbing
after transmitting REC/DUB RE-
QUEST.
ERROR CLEAR :
Clears the last transmitted byte. Also use
this command to release errors.
41
56
0B
E2
FA
COUNTER RESET :
Counter reset E2 40.
CLEAR :
Cancels whole commands. Also use this
command to release errors.
REC/DUB REQUEST :
Recording request. (Use this com-
mand with a recording command).
NAK :
Returned when the VCR receives an unde-
fined command for the first byte or a com-
mand specifying a function not available for
the VCR. Releasing the error with the
CLEAR command is not necessary. Send
the correct command.
E-88
Download from Www.Somanuals.com. All Manuals Search And Download.
❈
Example of CLEAR ERROR
Specify the cue-up point at 1:10:10:25.
The specified data after the CUE UP WITH
DATA command is invalid. Correct it with the
CLEAR ERROR command.
Input error
01
10
10
25
TxD
RxD
B2
30
31
31
30
31
30
33
41
32
35
0A
0A
0A
0A
0A
0A
0A
0A
0A
0A
0A
CLEAR ERROR
● Information gathering (sense) commands
These commands are used to check the VCR
operation status.
When a command corresponding to requested
information is received by the VCR, data is re-
turned in 1-byte packets. The number of bytes
returned differs depending on the command.
Table Command
Description
ROM VERSION :
Table Command
Description
J1
72
D8
CURRENT TC SENSE :
For checking the RS-232C interface-
related ROM version. 3-byte data is
returned.
For checking the time code data. The
data is returned in the order of hour,
minute, second and frame. Effective
when the counter mode is set to TC.
CURRENT CTL SENSE :
For checking the CTL data. The up-
permost digit shows positive or
negative.Effective when the counter
mode is set to CTL.
BE
DATA SENSE :
For checking theVCR’s date data.The
data is returned in order of month, date
and year. During playback, the time
data on the tape is returned.
TIME SENSE :
D9
BF
For checking theVCR’s time data.The
data is returned in order of hour,
minute and second. During playback,
the time data on the tape is returned.
DEVICE TYPE :
For checking the device type.
D: 44h, V:56h, 6:36h, K:4Bh
TAPE REMAIN SENSE :
For checking the tape remaining time.
3-byte data is returned showing the
hour (one’s place) and minutes (ten’s
place and one’s place).
B
B
B
DA
DB
DC
IN DATA SENSE :
For checking the edit-in position. The
data is returned in the order of hour,
minute, second and frame.
J1
J1
D1
D4
OUT DATA SENSE :
For checking the edit-out position. The
data is returned in the order of hour,
minute, second and frame.
CURRENT TC UB SENSE :
For checking the user’s bit data. Data
A from F is represented with ASCII
code 41h to 46h. Effective when the
counter mode is set to UB.
B
D6
D7
PREROLL SENSE :
For checking the preroll time. 2-byte
data is returned showing the seconds
(ten’s place and one’s place).
STATUS SENSE :
DD
FB
JVC STATUS SENSE :
For checking the status. Refer to JVC
STATUS SENSE. (☞ Page 91)
VTR IND :
For checking the status. Refer to STA-
For checking VCR connection.
TUS SENSE. (☞ Page 90)
E-89
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands – (continued)
Ⅵ D7: STATUS SENSE
This section describes 5-byte data that are re-
turned when the STATUS SENSE (D7H) com-
mand is sent.
● First byte
● Fifth byte
Bit No.
Status: If the bit is 1
Bit No.
Status: If the bit is 1
7
6
5
4
3
2
1
0
Always 1
Always 0
SHORT FF/REW
REC INHIBIT
CASSETTE OUT
SERVO LOCK
Undefined
7
6
5
4
3
2
1
0
PAUSE MODE
Unused
: VCR paused
: Always 0
: In short FF or short REW
: Recording prohibited
: No cassette tape loaded
: Servo locked
: Always 0
: Error occurring
SHUTTLE FWD
SHUTTLE REV
SPEED CODE3
SPEED CODE2
SPEED CODE1
SPEED CODE0
: VCR forward shuttle-searching
: VCR reverse shuttle-searching
: Refer to the following table.
: Refer to the following table.
: Refer to the following table.
: Refer to the following table.
ERROR
● Second byte
Search speed table (Supported speed only)
Bit No.
Status: If the bit is 1
Speed code (Bit No.)
Search speed
7
6
5
4
3
2
1
0
VIDEO EE
AUD EE
VIDEO MUTE
AUD MUTE
WARNING
DEW
: Video output in the EE mode
: Audio 1 output in the EE mode
: Video signals muted
: Audio signals muted
: Problem with the VCR
: Condensation in the VCR
: Short FF at the tape beginning.
: Short REW at the tape end
3
0
0
0
0
0
0
0
0
1
1
2
0
0
0
0
1
1
1
1
0
0
1
0
0
1
1
0
0
1
1
0
0
0
0
1
0
1
0
1
0
1
0
1
STILL
0.1
0.2
0.3
0.5
1
TAPE BEGIN
TAPE END
2
● Third byte
5
Bit No.
Status: If the bit is 1
9 (10)
20
7
6
5
4
3
2
1
0
TIMER PLAY
TIMER REC
Unused
REPEAT
Unused
: TIMER switch set to PLAY
: TIMER switch set to REC
: Always 0
(
): PAL
: REPEAT PLAYBACK mode ON
: Always 0
: Repeat playback in operation
REPEAT MODE
SEARCH MODE
Unused
: VCR being cueing-up/prerolling
: Always 0
● Fourth byte
Bit No.
Status: If the bit is 1
7
6
5
4
3
2
1
0
PLAY MODE
FF MODE
REW MODE
STOP MODE
STAND BY MODE : VCR on standby
EJECT
REC MODE
ADB MODE
: VCR playing
: VCR fast-forwarding
: VCR rewinding
: VCR stopped
: Cassette tape being ejected
: VCR recording
: VCR audio dubbing
E-90
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ DD: JVC STATUS SENSE
This section describes 4-byte data that are returned
when the STATUS SENSE command is sent.
Ⅵ Setup (preset) commands
These commands are for setting various types ofVCR
data.The commands corresponding to the settings can
be transmitted.
ⅷ First byte
Bit No.
Status: If the bit is 1
Table Command
Description
TC DATA PRESET :
7
6
5
4
3
2
1
0
Always 1
Always 0
Unused
DMF
Unused
JVC TABLE2
JVC TABLE1
LOCAL
B
E0
For presetting the time code data. To
set, transmit the time data following
this command. Specify the time in or-
der of hour, minute, second and frame,
using two digits for each. When EN-
TER (40h) is transmitted before all dig-
its have been transmitted, the time
code data are specified by entering
digits from the uppermost digit.
TC UB DATA PRESET :
: Always 0
: Playing back LP-mode tape
: Always 0
: JVC TABLE 2 enabled
: JVC TABLE 1 enabled.
: REMOTE switch set to LOCAL
ⅷ Second byte
B
E1
E3
Bit No.
Status: If the bit is 1
For presetting the user’s bit.
IN DATA PRESET :
7
TC GENERATOR
USER BIT
TIME CODE
: Time code generator in the TCG
mode.
: Counter mode set to the UB
mode.
: Counter mode set to the TC
mode.
For presetting the edit-in point. Set by
transmitting time data following this
command.
Specify the time in order of hour,
minute, second and frame, using two
digits for each.
If ENTER (40h) is transmitted before
all digits have been transmitted, this
command is executed with unspecified
parts set as “0.”
6
5
4
CONTROL PULSE : Counter mode set to the CTL
mode.
3
2
CTL completion
DROP FRAME
: Always 0
: Current time code in the DROP
FRAME mode
If this is a negative value in the CTL
mode, set 38h to the digit of 10H.
OUT DATA PRESET :
For presetting the edit-out point.
For details, refer to IN DATA PRESET
(E3h) above.
1
0
LTC
Unused
: Always 1
: Always 0
E4
E5
ⅷ Third byte
Bit No.
Status: If the bit is 1
B
EDIT PRESET :
7
6
TC REC RUN
TC REGEN
: TCG set to the Rec Run mode
: TCG set to the REGENERATION
mode
: TCG set to the EXT mode
: Time code insert edit mode
For selecting the edit mode. Each bit
is defined as shown in the table be-
low.
5
4
3
2
1
0
TC EXTERNAL
TC INSERT LED
AUD1 INSERT LED : Audio-1/2 insert edit mode
AUD2 INSERT LED : Audio-3/4 insert edit mode
VIDEO INSERT LED:Video insert edit mode
7
0
3
6
0
2
5
1
1
4
1
0
First
byte
0
INS ASM Video
ASSEM
: Assemble mode
0
3
0
2
1
1
1
0
Second
byte
ⅷ Fourth byte
0
TC Aud-1 Aud-2
Bit No.
Status: If the bit is 1
• ENTER (40h) is invalid.
PREROLL TIME PRESET :
For setting the preroll time.Specify this
by transmitting 2-byte data following
this command.First byte for ten’s place
and second byte for one’s place.
7
6
5
4
3
TBC PWB IN
TC PWB IN
: Always 1
: Always 1
DA3 INSERT LED : Always 0
DA4 INSERT LED : Always 0
B
E6
AUTO MODE
: Auto editing/Previewing/Review-
ing
2
1
0
Unused
Unused
Unused
: Always 0
: Always 0
: Always 0
E-91
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands – (continued)
Ⅵ Menu switch setup command
Table Command
Description
● ED: MEMORY SW PRESET (B/J1)
E7
TIMER MODE SELECT :
For selecting the counter mode. Fol-
lowing this command, send 1-byte
data corresponding to the counter
mode.
This command is for changing the VCR’s menu
switches. Following this command, transmit the
data (3 bytes) corresponding to the menu switch
to be changed.
High
Low
Counter mode
Example: Set SYNC SELECT to EXTERNAL.
1
2
5
TC
CTL
UB
3
In the diagram below, the data corresponding to
the setting of EXTERNAL show that DATA 0, D2
No. 1 bit and D2 No. 0 bit are, respectively, 01, 0
and 1. Set the command by transmitting data in a
way that the corresponding bit values match them.
(Fixed)
8E
8F
DATA SELECT :
For setting the date. Following this
command, send 6-byte numeric data.
Specify month, date and year (in this
sequence) with two digits for each.
TIME SELECT :
For setting the time. Following this
command, send 6-byte numeric data.
Specify hour, minute and second (in
this sequence) with two digits for each.
DATA0
D1
D2
TXD EDH
RXD
01H
0AH
0AH
0AH
0AH
7 6 5 4 3 2 1
0
Bit No.
D2
EXTERNAL : 0 1
● D3: MEMORY SW SENSE (J1)
This command is for checking the VCR’s menu
switch setting. Following this command, transmit
the data (DATA0) corresponding to the menu switch
to be checked.
You can confirm the setting with the bit count of
the returned data (D1, D2).
Example: Check the SYNC SELECT setting.
As in the diagram below, the setting can be checked
by confirming the values for the menu switch. In
this example, check the values for DATA0 (namely
01), D2 No. 1 and No. 0 of the returned data.
DATA0
D3H
01H
TXD
RXD
0AH
D1
7 6 5 4 3 2 1
D2
0
Bit No.
D2
AUTO : 1 1
EXTERNAL : 0 1
E-92
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ SYSTEM Menus
Corresponding bit values (D1/D2)
DATA
0
D1/D2
Set value
Menu
7
6
5
4
3
2
1
0
SYNC SELECT
01
95
93
95
95
D2
D1
D1
D2
D1
AUTO
1
0
1
1
EXTERNAL
INDEX
VAR
“
,
”KEY FUNC.
0
1
STL/F.ADV MODE
BACK UP REC TIME
FIELD
FRAME
1ST
0
1
0
1
1
0
2ND
OFF
0
0
0
0
1
1
1
1
1
0
0
1
0
0
1
1
0
0
1
0
1
0
1
1
0
1
0
1
0
1
0
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
30SEC
1MIN
LONG PAUSE TIME
10
D1
0
0
1
1
1
2MIN
3MIN
5MIN
LONG PAUSE MODE
REPEAT MODE
10
01
D1
D2
STBY-OFF
F.ADV
OFF
0
1
0
0
0
0
0
1
0
0
0
1
0
0
1
0
0
1
0
1
0
0
TAPE END
INDEX
V. END
OPE OFF
OPE ON
OFF
DC IN MODE
INDEX WRITE
REPLICATION
95
88
95
D1
D2
D1
ON
OFF
0
0
1
0
1
0
SERIAL
DV
REPLICATE DELAY
95
D2
OFF
0
0
0
0
1
1
0
1
0
0
1
1
0
0
0
1
0
1
0
1
1SEC
2SEC
3SEC
4SEC
5SEC
OFF
OPERATION LOCK
PB/DV IN
01
08
D1
D2
ON
NTSC
PAL
0
1
E-93
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands – (continued)
Ⅵ REMOTE Menus
❈
With RS-232C, REMOTE SEL 9P and REMOTE SEL 232 cannot be set.
Corresponding bit values (D1/D2)
Menu
Set value
DATA D1/D2
0
7
6
5
4
3
2
1
0
❈
REMOTE SEL 9-PIN
93
93
93
D2
D2
D2
OFF
ON
OFF
ON
OFF
ON
LOC+REM
OFF
ON
LOC+REM
OFF
ON
LOC+REM
OFF
ON
LOC+REM
OFF
ON
OFF
ON
0
1
❈
REMOTE SEL 232
0
1
REMOTE SEL SER
0
1
1
0
0
1
96
93
96
D1
D2
D1
REMOTE SEL DV
0
1
1
0
0
1
REMOTE SEL JVC
REMOTE SEL NET
93
93
D2
D2
0
1
0
1
1
0
0
1
0
0
1
1
0
0
0
1
LOC+REM
OFF
ON
96
20
D1
D1
LOC+REM
EJECT
STP+EJT
ALL KEY
NO KEY
3 SEC
5 SEC
7 SEC
10 SEC
FF/REW
SEARCH
EE
LOCAL FUNCTION
PREROLL
0
1
0
1
0
1
1
0
20
D2
1
0
1
1
1
1
1
0
REMOTE
FF/REW MODE
REM STOP SEL
93
93
96
D1
D1
D2
0
1
0
1
PB
OF
1F
PB START DELAY
0
0
0
0
0
0
0
1
to
15F
1
1
1
1
SYNCHRONIZATION
CONTROLLER SEL
40
90
D1
D2
OFF
ON
0
1
TYPE1
TYPE2
TYPE3
TYPE4
OFF
L EDGE
H EDGE
L LEVEL
0
0
0
0
0
0
1
1
0
1
0
1
FOOT SW
88
D2
0
0
1
1
0
1
0
1
E-94
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ AUDIO Menus
Corresponding bit values (D1/D2)
DATA
0
D1/D2
Set value
32k
48k
OFF
ON
XLR
RCA
–20dB
–12dB
OFF
ON
Menu
7
6
5
4
3
2
1
0
AUDIO MODE
03
05
30
30
05
D2
D1
D2
D1
D1
0
0
0
1
A.OUT AT SEARCH
AUDIO INPUT SEL
AUDIO OUT LEV
V.FADE
0
1
0
1
0
1
0
1
Ⅵ VIDEO Menus
VIDEO INPUT SEL
02
02
0D
D2
D2
D2
Y/C
COMPONENT
OFF
ON
OFF
ON
0
1
SET UP(NTSC)
BLACK BURST
0
1
0
1
Ⅵ TC/UB/CLOCK Menus
TCG SOURCE
TCG SELECT
TCG MODE
81
81
81
81
78
78
D2
D2
D2
D2
D2
D1
INTERNAL
EXTERNAL
PRESET
REGEN
FREE RUN
REC RUN
DROP
NON DROP
OFF
ON
OFF
AUTO
NON DROP
OFF
0
1
0
1
0
1
NDF/DF(NTSC)
DF BIT(PAL)
0
1
0
1
TC DUPLICATE
0
0
1
0
1
0
TC OFFSET
78
D2
0
0
0
0
1
0
0
1
1
0
0
1
0
1
0
+1F
+2F
–2F
–1F
U-BIT (PAL)
DATE REC
78
78
D2
D2
OFF
ON
OFF
ON
0
1
0
1
E-95
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C INTERFACE
– RS-232C commands – (continued)
Ⅵ DISPLAY Menus
Corresponding bit values (D1/D2)
Set value
DATA
0
D1/D2
D1
Menu
7
6
5
4
3
0
2
0
1
0
0
0
LCD BRIGHTNESS
F1
F1
F1
F1
MAX(5)
to
0
to
0
1
1
0
0
1
1
0
MIN(–5)
MAX(5)
to
LCD CHROMA
D1
D2
D2
0
0
1
0
1
0
0
0
1
0
1
0
0
to
MIN(–5)
MAX(5)
to
LCD CONTRAST
0
0
1
0
1
0
0
0
1
0
1
0
0
to
MIN(–5)
LCD AUTO OFF
DISPLAY
OFF
0
0
1
1
0
1
0
1
30MIN
1HOUR
2HOUR
OFF
01
72
D1
D1
0
1
ON
OFF
0
0
1
0
0
0
0
–
0
1
0
0
0
0
0
–
ON
AUTO
LOWER R
LOWER L
UPPER R
UPPER L
CENTER
OFF
COUNTER POSI.
82
D1
0
0
1
1
–
0
0
0
0
–
0
0
1
1
–
0
0
1
1
–
0
1
0
1
–
0
0
0
0
–
0
1
TIME CODE
VTR MODE
TAPE REMAIN
TIME/DATE
72
72
82
83
D1
D1
D2
D2
ON
OFF
0
1
ON
OFF
0
1
ON
OFF
TIME
DATE
DATE+TM
OFF
0
0
0
0
0
0
1
1
0
1
0
1
AUDIO INFO.
EDIT INFO.
72
72
83
D1
D1
D2
0
1
ON
OFF
0
1
ON
DATE STYLE
YY/MM/DD
MM/DD/YY
DD/MM/YY
12H
0
0
1
0
1
0
TIME STYLE
83
D2
0
1
24H
E-96
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Warning display –
When an error occurs, BR-DV6000 automatically self-diagnoses the cause and displays an error-
coded warning message on the monitor.
If BR-DV6000 is not in good order, or if an operation error has occurred, an alarm display will be
shown on the monitor or the LCD.
Warning display
Alarm display
3 2 K C H – 1 / 2
S P 0 0 0 m i n
3 2 K C H – 1 / 2
S P 0 0 0 m i n
W
A R N I NG 7 0 0 1
H E A D C L E A N I NG R E QU I R E D !
D R UM MO T OR F A I L U R E
-
-
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
S T A N D B Y O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
Ⅵ Alarm display (Displayed regardless of the DISPLAY mode)
Display
Status
Action
The DC power voltage is low.
BR-DV6000 will eventually go into the OPER-
ATE OFF mode if operation is continued.
Check the power voltage.
LOW VOLTAGE
The video head is dirty. (This message is dis-
played when the DISPLAY mode is ON or
AUTO.) If the head is clogged, it will be detected
and the alarm message will be displayed in the
PLAYBACK mode.The display disappears when
the cassette is ejected or the head gets cleared
of clog.
Clean it with a JVC head-clean-
ing tape. (☞ Page 8)
If the message persists despite
cleaning, it could be due to bad
recording condition, defective
tape or head lifespan.
HEAD
CLEANING
REQUIRED!
The message will also disappear when the head
cleaning tape is loaded.
The internal temperature of BR-DV6000 has ex-
ceeded the stated value.
Disconnect the power and place
BR-DV6000 in a cool place. If
this message is displayed
again, the unit may have been
damaged. In such a case, con-
sult your JVC authorized
dealer.
OVER
HEATING!
This is a system error that occurs when the power
is turned on. The OPERATE indicator on BR-
DV6000 blinks in green.The unit will not accept
any operation commands.
Unplug the power cord from the
power outlet and wait for some
time before plugging it back in.
UNPLUG MAIN
POWER, PLUG
BACK IN
AFTER A
WHILE
• For alarm displays resulting from operation errors, Refer to page 24.
E-97
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Warning display – (continued)
Ⅵ Warning display (Displayed regardless of the DISPLAY mode)
When a warning display appears, BR-DV6000 stops operation and ceases to accept any operation
command.When TAPE DEFFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera-
tions except EJECT operation.
Display
Status
Action
Leave the power on and wait for the
display to disappear.
WARNING 0201
CONDENSATION
ON DRUM
Condensation.
This error can be resolved by turning
off and then on the power. However,
doing so may damage the tape in some
cases. Consult your JVC authorized
dealer.
WARNING 3200
LOADING
Unable to load tape.
Unable to eject tape.
Eject error.
FAILURE
WARNING 3300
UNLOADING
FAILURE
WARNING 4100
CASSETTE
EJECT FAILURE
DEFECTIVE
TAPE!
Press the EJECT button to remove and
replace the tape.
Broken tape.
5605 - 5609
This error can be resolved by turning
off and then off the power. However,
doing so may damage the tape in some
cases. Consult your JVC authorized
dealer.
WARNING 5702
TAPE END DET.
ERROR!
WARNING 5802
TAPE BEGIN
DET. ERROR!
WARNING 7001
DRUM MOTOR
FAILURE
Tape-end sensor error.
Tape-begining sensor error.
Drum rotation error.
Capstan rotation error.
Supply reel rotation error.
WARNING 7101
CAP MOTOR
FAILURE
WARNING 7202 -
7203
SUPPLY REEL
FAILURE
WARNING 7302 -
7303
Take up reel rotation error.
TAKE UP REEL
FAILURE
WARNING 7305
TAKE UP REEL
FAILURE
WARNING 7401
REEL MOTOR
FAILURE
Tape winding error during unloading.
Reel motor rotation error.
Memo
This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens,
please turn off the power and then on again.
E-98
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Troubleshooting –
Symptom
Action
No power
Is the AC adapter correctly connected?
Unable to record.
Is the slide of the cassette tape turned to “REC”?
Set it to “REC” if it is at the “SAVE” position.
The operation buttons of BR-
DV6000 do not work.
Is OPERATION LOCK of the SYSTEM (2/2) menu set to ON?
Set it to OFF if the operation buttons are to be used.
For REMOTE, select the buttons that can be operated with the
LOCAL FUNCTION Menu.
Editing cannot be controlled
even after the REMOTE/LOCAL
switch is set to REMOTE.
To control with RS-422A, set REMOTE SEL 9-PIN in the RE-
MOTE (1/2) Menu screen to “ON”.
To control with the JVC bus, set REMOTE SEL JVC to “ON”.
Noise is produced on the
playback video.
Playback sound interrupted.
• The tape is damaged.
Replace the tape.
• The head is dirty.
Clean it with the specified head-cleaning tape. (Page 8)
Time codes are not correctly
recorded during DV signal input.
Is TC DUPLICATE in the TC/UB/CLOCK (1/2) Menu screen
correctly set up?
Unable to turn on the power with Isn’t the REMOTE/LOCAL switch set to REMOTE when LO-
the OPERATE button.
CAL FUNCTION in the REMOTE Menu screen is not set to
ALL KEYS?
Serial remote control does not
function.
Isn’t REMOTE SEL SER in the REMOTE (1/2) Menu screen
set to OFF?
For serial remote control, set it to ON or LOC+REM.
Unable to operate BR-DV6000
with the DV terminal.
Isn’t REMOTE SEL DV in the REMOTE (1/2) Menu screen set
to OFF?
To operate with the DV terminal, set it to ON or LOC+REM.
When the power is turned on,
the unit goes into the REC or
PLAYBACK mode.
The TIMER switch on the rear panel is set to REC or PLAY.
Check the setting of the TIMER switch before turning on the
power.
E-99
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Checking the hour meter –
This unit displays the drum usage time as the hour meter in DRUM HOUR METER in the SYSTEM
(2/2) Menu screen. Use it as a guide for regular maintenance. (☞ Page 7)
MENU button
8 button
OPERATE
PLAY
A.DUB
EJECT
REC
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
DISP
SET
PROFESSIONAL
SEARCH+
CUE UP
SET button
REW
STOP
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
: button
9 button
TOP MENU screen
:Operation:
Ⅵ Set BR-DV6000 to the STOP mode:
–
–
– M E N U
–
–
–
S
Y
S
T
E M
.
.
.
.
R E M O T
E
.
A U D
I
O
.
1. Press the MENU button to display the TOP MENU screen.
V
T
D
I
C
I
D E O
/
S
.
/
A
.
C
Y
U B
P
L
L
O C K
.
.
.
.
L
S
P
I
E
T
2.Press the 8 or 9 button to bring the cursor to SYSTEM.
N E T W O R K
A C K C O N
F
I
G
.
.
M O V
E
I
T
E
C
P
.
.
Press SET or the : button.
X
I
¥ The SYSTEM (1/2) Menu screen is displayed.
3. Press the 8 or 9 button to bring the cursor to NEXT PAGE.
Press SET or the : button.
SYSTEM (1/2) Menu screen
¥ The SYSTEM (2/2) Menu screen is displayed.
• The drum usage time is displayed on DRUM HOUR METER in
the SYSTEM (2/2) Menu screen.
–
–
–
S
L
Y
S
T
T
E M
[
1
/
2
]
–
–
–
–
–
–
S
S
B
L
L
“
Y N C
S
.
E
E C
A U T O
T
L
/
F
A D V M O D E
2
O F
5 M
F
I
O F
N D
A C K U P R E C
T
T
I
I
M E
M E
F
I
O N G
O N G
,
P
P
A U S
A U S
K
E
E
N
4. Press the MENU button to return to the normal screen.
M O D E
.
A D V
”
A
E
Y
F
U N C
.
N D E
X
R E
N E
A G E
P
X
E
T
T
P
B
M O D E
F
A G E
A C K
P
SYSTEM (2/2) Menu screen
–
–
–
S
Y
S
T
E M
[
2
/
2
]
–
–
–
–
–
–
D C
I
N
X
I
M O D E
O P
O N
O F
O F
O F
E
O F
F
I
N D E
W R
I
I
T
E
R E
R E
O P E R A
P
P
L
L
C A
C A
I
I
T
T
O N
L
F
F
F
L
I
E
D E
L
A
Y
T
O N
N
O C K
P
F
B
/
D V
P
A
A C T O R Y
S
E
T
T
I
T
N G
E R
C A N C E
L
0
D R U M H O U R M E
A G E
0
0
0
2
0
P
B
A C K
Drum usage time
Download from Www.Somanuals.com. All Manuals Search And Download.
E-100
OTHERS
– Optional devices –
COMPONENT
C
B
VIDEO
REMOTE2
AUDIO
LINE
IN
Y/C
IN
R-Y
B-Y
Y
OUT
CH 1/3
CH 2/4
OUT
IN
OUT
MONITOR
OUT
IN
OUT
OUT
SYNC IN
TIME CODE
IN
OFF
REC
PLAY
DV
IN/OUT
MONITOR
OUT
SERIAL
REMOTE
TIMER
SIGNAL
GND
C
REMOTE1
DC12V
A
Memo
Install an optional board, SA-DV6000, SA-
B
X61U, or SA-X62U to
gram above.
as shown in the dia-
Ⅵ XLR IN board: SA-X61U
Ⅵ RS-232C interface board: SA-K46U
This is an audio input board with two XLR ter-
This is an interface board for controlling BR-
DV6000 with the RS-232C interface. Connect it
to BR-DV6000 with the RS-232C cable. Use a
reverse-type cable.
minals.
• Connect it to
B
.
• To enable audio input from the terminals, set
AUDIO INPUT SEL in the AUDIO Menu
screen to XLR. (☞ Page 78)
• Replace it with the RS-422A REMOTE
A
(9-PIN) terminal of . (☞ Page 102)
• To control BR-DV6000 with RS-232C, set
REMOTE SEL 232 in the REMOTE (1/2).
Menu screen to “ON”.
Ⅵ XLR OUT board: SA-X62U
This is an audio output board with two XLR ter-
• Details of the command: (☞ Page 84)
minals.
• Connect it to
B
.
Ⅵ Network board: SA-DV6000
This network board can be used to record
streaming data of video and sound of BR-
DV6000 on to CF card, and to transmit stream-
Installing SA-X61U or SA-X62U
C
ing data to the PC via a LAN card.
1. Remove the slot cover by removing the two
screws, which are securing the cover.
B
• Connect it to
.
2. Insert SA-X61U or SA-X62U into BR-DV6000.
• To control BR-DV6000 with SA-DV6000, set
REMOTE SEL NET in the REMOTE (1/2).
Menu screen to ON or LOC+REM.
3. Fix SA-X61U or SA-X62U to BR-DV6000 with
C
the two
screws, removed in 1.
• With the SA-DV6000 installed, the network-
related menus will be added.
For details, refer to the user’s guide of SA-
DV6000.
Note
Contact your JVC authorized service agent before installing the above optional boards.
E-101
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Installing SA-K46U RS-232C interface board –
The RS-422A REMOTE 1 terminal of BR-DV6000 can be replaced with SA-K46U RS-232C inter-
face board. Use the plate for the RS-422A REMOTE 1 terminal for installing SA-K46U RS-232C
interface board.
The replacement procedure is described below. However, to prevent electrical shock or injury, the
work should be performed only by a qualified personnel or a JVC authorized service agent.
A
AUDIO
CH 1/3
CH 2/4
Caution
IN
OUT
To prevent electrical shock, remove the AC adaptor before install-
ing SA-K46U.
PLAY
MONITOR
OUT
REMOTE
1
A
1.Remove the RS-422A REMOTE 1 terminal.
1 Remove the two screws Å and pull out the RS-422A REMOTE
1 terminal.
2 Remove the connector cable connected to the connector of
the RS-422A REMOTE board.
❈
Remove the cable carefully not to damage it.
REMO
RS-422A REMOTE
2. Remove the plate of RS-422A REMOTE 1 terminal.
• For removing the plate, remove the two hexagonal screws first
with a tool such as a socket wrench.
Plate
Hexagon
screw
Socket wrench
3.Remove the SA-K46U plate in the same procedure above.
4.Fix the plate of RS-422A REMOTE 1 terminal, removed in 2
SA-K46U
Plate
above, to SA-K46U.
Hexagonal screws
The screw holes for the hexagonal screws of RS-422A are of the
metric system while those of RS-232C are of the inch system.
plate
Hexagon screw
Screw hole
5.Install the SA-K46U.
Wire (Red)
1 Connect the connector cable with red wires to the connector of
the SA-K46U board.
Memo
BR-DV6000 connector cable colors
RS-232C: Red
RS-422A:Yellow
REMO
2 Fix SA-K46U to BR-DV6000 with the two screws Å, removed
in 1 - 1.
E-102
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Specifications –
Ⅵ General
Recording system : DV system (SP mode only)
Signal system
Component
Y
: 1.0 V (p-p), 75 Ø unbalanced
(100%, Color Bar)
: 0.7 V (p-p), 75 Ø unbalanced
(100%, Color Bar, without Setup)
: 0.7 V (p-p), 75 Ø unbalanced
(100%, Color Bar, without Setup)
: NTSC/PAL (NTSC for playback
and DV input only)
: Standard/ mini DV cassette tape
: 6.35mm
: 18.812mm/s (NTSC)
18.831mm/s (PAL)
R-Y
B-Y
Cassette tape
Tape width
Tape speed
Monitor (composite) : 1.0 V (p-p), 75 Ø unbalanced
(On-screen display)
Horizontal resolution : At least 500 lines
Recording/ playback time
: 276 minutes (LA-DV276)
60 minutes (M-DV60)
Fast forward/ rewind time
S/N
: At least 50 dB
Ⅵ Audio
Recording format
: About 3 minutes (LA-DV276)
About 1 minute (M-DV60)
: DC12 V } (By the supplied AC
adapter)
: 16 bit, 48kHz, 2-channels
PCM audio/12 bit, 32kHz,
4-channel PCM audio
: 2 (16 bit,4 8kHz) /
Power
Power consumption : 24 W
External dimension : 212 mm (W)
ן 88mm (H) ן 327mm (D) (Excluding Number of track
4 (12 bit, 32kHz)
Audio input
Mike input
Audio output
Headphone
: –8 dBs, 10 kØ unbalanced
: –60 dBs, 3 kØ unbalanced
: –8 dBs, 1 kØ unbalanced
: – to – 20 dBs,
33 kØ unbalanced (stereo)
: –8 dBs, 1 kØ unbalanced
(monaural)
protruding parts)
: About 4.5 k˝
Weight
Allowable operating temperature
: 5˚C to 40˚C
Allowable storage temperature
: –20˚C to 60˚C
Monitor
Allowable operating RH
: 30%RH to 80%RH
Ⅵ Video
Frequency characteristics
: 20 Hz to 20 kHz (48kHz)
20 Hz to 16 kHz (32kHz)
XLR terminal (Option)
Recording format
: 8 bit, 13.5 MHz,
4:1:1 (NTSC)
4:2:0 (PAL)
Input
Output
: + 4 dBs,high impedance,balanced
: + 4 dBs,low impedance,balanced
Video input
Ⅵ DV interface
Input/output
Line (composite)
: 1.0 V (p-p), 75 Ø unbalanced
: 1.0 V (p-p), 75 Ø unbalanced
: 0.3 V (p-p), 75 Ø unbalanced
: 1.0 V (p-p), 75 Ø unbalanced
(100%, Color Bar)
Y/C
Y
C
Y
: IEEE1394
Ⅵ Time code
LTC input
Component
: 0 6 dBs, high impedance
: 0 6 dBs, low impedance
R-Y
B-Y
: 0.7 V (p-p), 75 Ø unbalanced
(100%, Color Bar, without Setup)
: 0.7 V (p-p), 75 Ø unbalanced
(100%, Color Bar, without Setup)
LTC output
Ⅵ AC adapter
Input
: AC 220 V to 240 V`,
50 Hz/60 Hz x 1.5 A
: DC 12 V } 5 A
Video output
Line (composite)
: 1.0 V (p-p), 75 Ø unbalanced
: 1.0 V (p-p), 75 Ø unbalanced
: 0.286 V (p-p) (NTSC) /
0.3 V (p-p) (PAL)
Output
Y/C
Y
C
Ⅵ Accessories
AC adapter ...................................................................
ן 1 Power cord ...................................................................
ן 2 75 Ø unbalance
E-103
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
– Specifications – (continued)
Ⅵ External dimensions (Unit: mm)
88
212
OPERATE
A.DUB
EJECT
REC
PLAY
STOP
PAUSE
FF
Mini
MENU
SEARCH–
HOLD
RESET
SEARCH+
CUE UP
DISP
SET
PROFESSIONAL
REW
MIC
BLANK
AUDIO
INPUT
PHONES
REC LEVEL
COUNTER MONITOR OUTPUT SELECT REMOTE
CTL
TC
UB
L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
CH-1/3
CH-2/4
BR-DV6000
LOCAL
(CPN)
For improvement, the specifications and external appearance may be changed without prior notice.
E-104
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
® is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
® is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Printed in Thailand
LLT0034-002B-H
Download from Www.Somanuals.com. All Manuals Search And Download.
|