MICRO COMPONENT SYSTEM
UX-P38V
Consists of CA-UXP38V and SP-UXP38V
SP-UXP38V
CA-UXP38V
SP-UXP38V
COMPACT
COMPACT
DIGITAL VIDEO
DIGITAL AUDIO
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GVT0068-003A
[US, UN, UB]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS /
/
2
2
WARNING LABEL, PLACED INSIDE THE UNIT
1
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
CLASS
LASER
1
urkopplad.
Betrakta
ej
(s)
telse for stråling
(d)
TO BEAM.
(e)
strålen.
PRODUCT
1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
SS
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back:
No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.
15 cm
15 cm
15 cm
1 cm
1 cm
15 cm
15 cm
UX-P38V
10 cm
UX-P38V
– G-2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
Moisture condensation
Moisture may condense on the lens inside the unit in the
following cases:
About This Manual
This manual is organized as follows:
• After starting heating in the room
• The manual mainly explains operations using the buttons
on the remote control.
• In a damp room
• If the unit is brought directly from a cold to a warm place
Should this occur, the unit may malfunction. In this case, leave
the unit turned on for a few hours until the moisture evaporates,
unplug the AC power cord, and then plug it in again.
You can use the buttons both on the remote control and
on the unit for the same operations if they have the same
or similar names (or marks), unless mentioned otherwise.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in each
procedure. For instance, we do not repeat the information
about turning on/off the unit, setting the volume, changing
the sound effects, and others, which are explained in the
section “Common Operations” on pages 9 to 10.
Others
• Should any metallic object or liquid fall into the unit, unplug
the unit and consult your dealer before operating any further.
• If you are not going to operate the unit for an extended period
of time, unplug the AC power cord from the wall outlet.
• The following marks are used in this manual:
Gives you warnings and cautions to prevent from
damage or risk of fire/electric shock.
DO NOT disassemble the unit since there are no user
serviceable parts inside.
Also gives you information which is not good
for obtaining the best possible performance from If anything goes wrong, unplug the AC power cord and consult
the unit.
your dealer.
Gives you information and hints you had better
know.
Which compact discs can be used?
Many types of compact discs are sold for a variety of uses. The
player can play the following compact discs:
Video CD discs both with and without PBC.
Precautions
COMPACT
Installation
DIGITAL VIDEO
• Install in a place which is level, dry and neither too hot nor
too cold — between 5˚C (41˚F) and 35˚C (95˚F).
• Install the unit in a location with adequate ventilation to
prevent internal heat built-up in the unit.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
COMPACT
Audio CD discs
DIGITAL AUDIO
Discs you cannot playback
Any other discs than listed above (such as CD-ROM, DVD,
CD-G or CD-I Discs) cannot be played. Playing back such discs
may generate noise and damage your speakers.
Even though a logo listed above is printed on the disc, it may
not be played if it is a non-standard disc.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
Power sources
• When unplugging from the wall outlet, always pull the plug,
not the AC power cord.
DO NOT handle the AC power cord with wet hands.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Location of the Buttons and Controls ....................... 3 Using the Video CD Player
(Video CDs) ........................................................... 15
Front Panel ................................................................. 3
Remote Control .......................................................... 5
Setting the TV System.............................................. 15
Playing Video CDs with the PBC Function ............. 15
Playing Video CDs with the PBC Function without
Using the Menu Screen (Continuous Play) ........ 15
Playing Video CDs with the PBC Function
Using the Menu Screen (Menu-Driven Play) ..... 16
Playing Video CDs without the PBC Function ........ 17
Various Functions to EnhanceYour Enjoyment ....... 17
Getting Started .............................................................. 6
Supplied Accessories.................................................. 6
Putting the Batteries into the Remote Control ........... 6
Connecting Antennas ................................................. 6
Connecting Speakers .................................................. 7
Connecting Other Equipment..................................... 7
Adjusting the Voltage Selector ................................... 8
Playing Back Tapes ................................................... 19
Common Operations .................................................. 9
Playing Back a Tape ................................................. 19
Turning On the Power ................................................. 9
Setting the Clock ........................................................ 9
Setting the AM Tuner Interval Spacing ...................... 9
Selecting the Sources and Starting Play ..................... 10
Adjusting the Volume ............................................... 10
Reinforcing the Bass Sound ..................................... 10
Selecting the Sound Modes ...................................... 10
Recording .................................................................. 20
Recording on a Tape ................................................. 20
CD Direct Recording ................................................. 21
One Track Recording ................................................ 21
Using the Multiplex CDs .......................................... 22
Listening to FM and AM Broadcasts ...................... 11
Using the Timers ....................................................... 23
Tuning in a Station ................................................... 11
Presetting Stations .................................................... 11
Tuning in a Preset Station ........................................ 11
Using Daily Timer and Recording Timer ................. 23
Using Sleep Timer .................................................... 24
Maintenance .............................................................. 25
Troubleshooting ........................................................ 26
Specifications............................................................. 26
Playing Back CDs (CD/CD-R/CD-RW) .................. 12
Playing Back the Entire CD — Normal Play ........... 12
Basic CD Operations ................................................ 12
Programming the Playing Order of the Tracks
— Program Play ................................................. 13
Playing at Random — Random Play ....................... 13
Repeating Tracks — Repeat Play............................. 14
Prohibiting Disc Ejection — Tray Lock................... 14
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls
Become familiar with the buttons and controls on your unit.
Front Panel
Front Panel
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Display Window
See pages in the parentheses for details.
Front Panel
Display Window
1 Remote sensor
2 STANDBY lamp (9)
1 Tape operation indicators
• 2 3 (tape direction) and
2 Timer indicators
(reverse mode) indicators
3
STANDBY/ON button (9, 14, 24)
4 TAPE 2 3 button (19 – 20)
•
(timer), DAILY, REC and SLEEP indicators
Pressing this button also turns on the unit.
5 CD 3/8 SELECT (play/pause) button (9, 15 – 16, 18)
Pressing this button also turns on the unit.
6 AHB (Active Hyper Bass) PRO button (10)
7 SOUND button (10)
3 REC indicator
4 CLOCK indicator
5 CD play mode indicators
• PRGM (program), RANDOM, repeat (
PBC indicators
/
ALL) and
8 AUX button (9 – 10)
Pressing this button also turns on the unit.
9 PHONES jack (10)
p 0 (disc tray open/close) button (12)
Pressing this button also turns on the unit.
q Disc tray
6 BASS (Active Hyper Bass) indicator
7 SOUND (sound mode) indicator
8 Tuner operation indicators
• MONO and ST (stereo) indicators
9 Main display
• Shows the source name, frequency, etc.
w
RETURN button (17)
e FM/AM button (9, 11)
Pressing this button also turns on the unit.
r Display window
t CLOCK button (9)
y VOLUME + / – control (10)
u TIMER button (23 – 24)
i ¢ NEXT (forward search) button (9, 15 – 18)
o 7 (stop) button (12, 14 – 15, 19 – 21)
; PREV 4 (reverse search) button (9, 15 – 18)
a REV.MODE (reverse mode) VCD NUMBER button
(16, 20 – 21)
s Cassette holder
d REC button (20 – 21)
f 0 (eject) button for cassette deck (19 – 21)
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control
1 REPEAT button (14 – 15)
2 DISPLAY button (9)
3 PROG (program) button (13)
4 RANDOM button (13 – 15)
5 SOUND MODE button (10)
6 AUTO PRESET button (11)
7 CD 0 (disc tray open/close) button (12)
Pressing this button also turns on the unit.
8 SELECT CD 3/8 button (12 – 13, 15 – 18)
Pressing this button also turns on the unit.
9 PREV 4 (reverse search) button (11 – 13, 16)
p 7 (stop) button (12 – 14, 16)
q CANCEL button (13)
w STILL button (17)
e ON SCREEN button (18)
r MPX button (22)
t PBC button (15 – 16)
y AHB (Active Hyper Bass) PRO button (10)
u STANDBY/ON
i SLEEP button (24)
o AUX button (10)
button (9)
Pressing this button also turns on the unit.
; FM/AM button (11)
Pressing this button also turns on the unit.
a TAPE 2 3 button (19)
Pressing this button also turns on the unit.
s FM MODE button (11)
d NEXT ¢ (forward search) button (11 – 13, 16)
f MULTI KEY >/< button (11 – 13)
g SET button (11)
h
RETURN button (16 – 17)
j VIDEO INTRO button (18)
k VCD No + / – button (16, 18)
l VOLUME + / – buttons (10)
When using the remote control, point it at
the remote sensor on the front panel.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Supplied Accessories
Connecting Antennas
Make sure that you have all the following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
FM antenna
ANTENNA
• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
• AC plug adaptor (1)
• Video cord (1)
FM antenna (supplied)
EXT
AM LOOP
FM 75
OAXIAL
If anything is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
1 Attach the FM antenna to the FM 75 Ω
COAXIAL terminal.
Insert the batteries — R6(SUM-3)/AA(15F) — into the remote
control, by matching the polarity (+ and –) on the batteries with
the + and – markings on the battery compartment.
When the remote control can no longer operate the unit, replace
both batteries at the same time.
2 Extend the FM antenna.
3 Fasten it up in the position which gives you the
best reception, then fix it on the wall, etc.
1
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
R6(SUM-3)/AA(15F)
2
Outdoor FM antenna
(not supplied)
3
Coaxial cable
ANTENNA
T
LO
X
M
P
E
O
A
FM 75
OAXIAL
• DO NOT use an old battery together with a new
one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery
leakage.
A 75 Ω antenna with coaxial type connector should be
used.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
AM antenna
Connecting Speakers
Red
Speaker
cord
Speaker
cord
Black
Vinyl-covered wire
(not supplied)
1
Right
speaker
Left
speaker
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2 Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: Red (+) to red
(+) and black (–) to black (–).
2
AM loop antenna
(supplied)
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the rear
of the unit.
1 Connect theAM loop antenna to theAM LOOP
terminals as illustrated.
• If the AM loop antenna wire is covered with
vinyl, remove the vinyl by twisting it as shown
in the diagram.
Connecting Other Equipment
2 Turn the AM loop antenna until you have the
You can connect audio equipment — used only as a playback
device.
best reception.
To connect an outdoor AM antenna
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all connections
are complete.
When reception is poor, connect a single vinyl-covered wire to
theAM EXT terminal and extend it horizontally. (TheAM loop
antenna must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other terminals
and connecting cords.
• Keep the antennas away from metallic parts of the unit, connecting
cords, and the AC power cord.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To connect audio equipment
Adjusting the Voltage Selector
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for right
audio signals.
Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
To audio output
Audio equipment
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).
Voltage mark
To connect audio equipment with an optical digital
input terminal (For Hong Kong only)
You can record CD sound onto the connected digital equipment.
Use a screwdriver to rotate the voltage selector so the voltage
number the voltage mark is pointing at is the same as the voltage
where you are plugging in the unit. (See the back cover page.)
Protective plug
DO NOT plug in before setting the voltage selector
on the rear of the unit and all connection procedures
are complete.
OPTICAL
DIGITAL
OUT
Before connecting the other equipment,
remove the protective plug from the
terminal.
Now, you can plug the AC power cord.
IMPORTANT: Be sure to check all connections to be done
before plugging the AC power cord into a wall outlet.
Audio equipment with
an optical digital input
To optical digital input
Connect an optical digital cord (not supplied) between the optical
digital input terminal on the other equipment and the OPTICAL
DIGITAL OUT terminal.
To connect a TV set
You can connect a TV with a video input jack: used as a monitor
for video CD playback.
Auxiliary Equipment
TV
To video input
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
Turning On the Power
2 Press ¢ NEXT or PREV
4 to adjust the hour, then
press CLOCK.
When you press the play button — CD 3/8 SELECT, TAPE
2 3, or the source selecting button — FM/AM and AUX, the
unit automatically turns on and starts playback if the source is
ready.
The minute digits start flashing on the
display.
To turn on the unit, press
STANDBY/ON.
The STANDBY lamp on the unit lights green.
3 Press ¢ NEXT or PREV
4 to adjust the minute, then
press CLOCK.
To turn off the unit (on standby), press
again.
The STANDBY lamp lights red.
STANDBY/ON
The CLOCK indicator remains lit on the
display.
• The CLOCK indicator flashes on the display until you set the
built-in clock. After setting the clock, the clock time will
appear on the display while the power is off.
• A little power is always consumed even while the unit is on
standby.
To check the clock time
Press DISPLAY on the remote control (or CLOCK
on the unit) while playing any source.
• Each time you press the button, the source
indication and the clock time alternate on the
display.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug theAC power cord or if a power failure
occurs
The clock is reset to “0:00” right away, while the tuner preset stations
(see page 11) will be erased in a few days.
• When you unplug the AC power cord or if a power failure occurs,
the clock loses the setting and is reset to “0:00.”You need to set the
clock again.
• The clock may gain or lose 1 to 2 minutes per month.
Setting the Clock
Before operating the unit any further, first set the clock built in
this unit. When you plug theAC power cord into the wall outlet,
the CLOCK indicator starts flashing on the display.
You can set the clock whether the unit is on or off.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 1 again.
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 10 kHz or
9 kHz spacing. You can change it to 10 kHz or 9 kHz spacing.
On the unit ONLY:
To select 10 kHz intervals, while holding down ¢ NEXT in
On the unit ONLY:
standby mode, press
STANDBY/ON to turn on the power
1 Press CLOCK for more than 2
(at the same time, the 10 kHz spacing is selected for AM
broadcast.)
seconds.
The hour digits start flashing on the display.
To select 9 kHz intervals, while holding down PREV 4 in
standby mode, press
STANDBY/ON to turn on the power.
[10 kHz Intervals]
[9 kHz Intervals]
When you change the setting
The preset stations are erased.You will need to preset the stations again.
(See page 11.)
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sources and Starting Play
Reinforcing the Bass Sound
To playback CDs, press SELECT CD 3/8. (See pages 12 – You can reinforce the bass sound to maintain rich (“AHB 1”
14.)
and “AHB 2”), full bass at low volume. This function only affects
the playback sound, but does not affect your recording.
To playback tapes, press TAPE 2 3. (See page 19.)
To listen to the FM/AM broadcasts, press FM/AM.
(See page 11.)
To get the effect, press AHB (Active Hyper Bass)
To select the external equipment as the source, press PRO until “AHB 1” or “AHB 2” appears on the
AUX.
display. The BASS indicator also lights up on the
display.
• Each time you press the button, the bass sound change as
follows:
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOLUME 0”
and “VOLUME 40”.
(Canceled)
“AHB 2” has much more bass reinforcement effect than
“AHB 1.”
To cancel the effect, pressAHB PRO until “AHB OFF” appears
on the display. The BASS indicator goes off.
When using the remote control, press
VOLUME + to increase the volume or
press VOLUME – to decrease it.
When using the unit, turn VOLUME + / –
clockwise (+) to increase the volume or
counterclockwise (–) to decrease it.
Selecting the Sound Modes
You can select one of the 4 preset sound modes. This function
only affects the playback sound, but does not affect your recording.
To select the sound modes, press SOUND MODE
on the remote control (or SOUND on the unit)
until the sound mode you want appears on the
display. The SOUND indicator also lights up on
the display.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes
out of the speakers. Be sure to turn down the volume before connecting
or putting on headphones.
DO NOT turn off (on standby) the unit with the volume
set to an extremely high level; otherwise, a sudden
blast of sound can damage your hearing, speakers
and/or headphones when you turn on the unit or start
playing any source next time.
• Each time you press the button, the sound modes change as
follows:
REMEMBER you cannot adjust the volume level
while the unit is on standby.
(Canceled)
ROCK:
POP:
Gives a heavy sound. Boosts low and high
frequency.
Good for vocal music.
CLASSIC: Good for classical music.
JAZZ:
Gives a feeling of live atmosphere. Good for
acoustic music.
FLAT:
The sound mode is canceled. The SOUND
indicator goes off.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM Broadcasts
Tuning in a Station
3 Repeat steps 1 and 2 to store stations for the
other band.
1 Press FM/AM.
The unit automatically turns on and tunes in
the previously tuned station (either FM orAM).
• Each time you press the button, the band
alternates between FM and AM.
When you cannot automatically store stations you want
Stations with weak signals cannot be detected with this automatic
presetting. To store such a station, use the manual presetting.
2 Press and hold NEXT ¢ or
PREV 4 for more than 1
second.
To preset stations manually — Manual Presetting
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 2 again.
The unit starts searching for stations and stops
when a station of sufficient signal strength is tuned in.
If a program is broadcast in stereo, the ST (stereo) indicator
lights up.
On the remote control ONLY:
1 Tune in the station you want to preset.
• See “Tuning in a Station.”
To stop searching, press NEXT ¢ or PREV 4.
2 Press SET.
When you press NEXT ¢ or PREV 4 briefly and
repeatedly
The frequency changes step by step.
3 Press MULTI KEY > or MULTI
To change the FM reception mode
When an FM stereo broadcast is hard to receive or
noisy, press FM MODE on the remote control so
that the MONO indicator lights up on the display.
Reception improves.
KEY < to select a preset number.
To restore the stereo effect, press FM MODE again so that the
MONO indicator goes off. In this stereo mode, you can hear
stereo sounds when a program is broadcasted.
4 Press SET again.
Presetting Stations
The tuned station in step 1 is stored in the preset number
selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
You can preset 30 FM and 15 AM stations — using either
automatic presetting or manual presetting.
In some cases, test frequencies have been already memorized
for the tuner since the factory examined the tuner preset function
before shipment. This is not a malfunction. You can preset the
stations you want into memory by following the presetting
method.
When you unplug theAC power cord or if a power failure
occurs
The preset stations will be erased in a few days. If this happens, preset
the stations again.
To preset stations automatically — Automatic Presetting
You need to preset stations separately for the FM and AM
bands.
Tuning in a Preset Station
On the remote control ONLY:
On the remote control ONLY:
1 Press FM/AM to select the band.
• Each time you press the button, the band
alternates between FM and AM.
1 Press FM/AM.
The unit automatically turns on and tunes in the
previously tuned station (either FM or AM).
• Each time you press the button, the band
alternates between FM and AM.
2 Press and hold AUTO PRESET for
more than 2 seconds.
Local stations with strong signals are searched
and stored in memory automatically.
When automatic presetting is over, the station stored in preset
number 1 is received.
2 Press MULTI KEY > or MULTI
KEY < to select a preset number.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back CDs (CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
• CD
• CD-R
• CD-RW
3 Press SELECT CD 3/8.
The disc tray automatically closes and the first
track of the CD starts playing.
Continued use of irregular shape CDs (heart-shape,
octagonal, etc.) can damage the unit.
Track number Elapsed playing time
• The CD automatically stops when the last track of the CD
has finished playing.
General Notes
In general, you will have the best performance by keeping your
CDs and the mechanism clean.
To stop playing, press 7.
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the unit’s disc tray closed when not in use.
Total track number Total playing time
To remove the disc, press CD 0 on the remote control (or 0
on the CD player section).
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played back only if they are already
“finalized”.
• You can playback your original CD-Rs or CD-RWs recorded
in music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• If the CD cannot be read correctly (because it is scratched, for
example)
“00 0000” appears on the display.
• If no CD is inserted
“NO DISC” appears on the display.
During Reading period, sometimes noise is generated by CD
mechanism.
• If an unreadable CD-R or CD-RW is inserted
“BLANK CD” appears on the display.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain on
them, or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
DO NOT try to open or close the CD tray by hand as
it will be damaged.
Basic CD Operations
Playing Back the Entire CD — Normal Play
While playing a CD, you can perform the following operations.
1 Press CD 0 on the remote control
(or 0 on the CD player section).
The unit automatically turns on and the disc
tray comes out.
To stop playing for a moment
Press SELECT CD 3/8.
While pausing, the elapsed playing time flashes
on the display.
To resume playing, press SELECT CD 3/8 again.
To go to another track
2 Place a disc correctly on the circle of the disc
Press MULTI KEY > / MULTI KEY < or
NEXT ¢ / PREV 4 repeatedly before or
during playback.
tray, with its label side up.
• MULTI KEY > or NEXT ¢ :
Skips to the beginning of the next
or succeeding tracks.
• MULTI KEY < or PREV 4 :
Goes back to the beginning of the
current or previous tracks.
INCORRECT
CORRECT
• When using a CD single (8 cm), place it on the inner circle
of the disc tray.
To locate a particular point in a track
During play, press and hold NEXT ¢ or PREV 4.
• NEXT ¢ : Fast-forwards the tracks.
• PREV 4 : Fast-reverses the tracks.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To check the program contents
Programming the Playing Order of the Tracks —
You can check the program contents on the display by pressing
PREV 4 or ¢ NEXT under stop condition. The programed
tracks are shown in the programed order.
Program Play
You can arrange the order in which tracks play before you start
playing. You can program up to 50 tracks.
To modify the program
Before or after playing, you can erase the last
programed track by pressing CANCEL on the
remote control.
• Each time you press the button, the last programed track is
erased from the program.
On the remote control ONLY:
1 Load a CD.
• If the current playing source is not the CD player, press
SELECT CD 3/8, then 7 button before going to the next
step.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
2 Press PROG (program).
The PRGM (program) indicator lights up on
the display.
• If you try to program the 51st track
“FULL” will appear on the display.
PRGM
3 Press MULTI KEY > or MULTI KEY < to
Playing at Random — Random Play
select the track number, then press SET.
The tracks will play in no particular order when you use this
mode.
On the remote control ONLY:
To use Random play mode, press RANDOM
before play.
The RANDOM indicator lights up on the display.
Track number
Program step number
4 Repeat step 3 to program other tracks you
The tracks are played at random.
Random play ends when all the tracks are played once.
want.
5 Press SELECT CD 3/8.
The tracks are played in the order you have
programed.
To skip the current track, press NEXT ¢ or MULTI KEY >.
• You cannot go back to the previous track by pressing
PREV 4 or MULTI KEY <.
To stop playing, press 7.
To stop playing, press 7.
• Random play mode is also canceled.
To exit from Program mode, press PROG button (during CD
stop mode). The PRGM indicator goes off. All the programed
tracks will be cleared.
To exit from Random play mode, press RANDOM again
before play. Random play mode is canceled and Normal play
resumes.
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating Tracks — Repeat Play
Prohibiting Disc Ejection — Tray Lock
You can have all the tracks, the program or individual track You can lock the disc tray and prohibit to eject the CD.
currently playing to repeat as many times as you like.
• This is possible only while the unit is turned on.
On the remote control ONLY:
On the unit ONLY:
To repeat playing, press REPEAT before or during
playing.
• Each time you press the button, Repeat play mode
changes as follows, and the following indicator
lights up on the display:
To prohibit disc ejection, press
STANDBY/ON while holding 7. (If the
disc tray is opened, close it first.) “LOCKED”
appears for a while, and the disc tray is locked.
Canceled
To cancel the prohibition and unlock the
CD, press
STANDBY/ON while holding
: Repeats one track.
7. “UNLOCKED” appears for a while, and
the disc tray is unlocked.
: In Normal play mode, repeat all the tracks.
In Program play mode, repeat all the tracks in the
program.
ALL
In Random play mode, repeats all the tracks in
random order.
If you try to eject the CD,
“LOCKED” appears to inform you that the disc tray is locked.
To stop playing, press 7.
To cancel Repeat play, press REPEAT repeatedly until the
repeat indicator goes off from the display.
• In Random play
cannot be selected. If
is selected
when you press RANDOM, it is canceled (goes off).
• Repeat mode remains in effect even when you change the
play mode.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video CD Player (Video CDs)
You can play video CDs (with or without the Playback Control
(PBC) function) to watch the picture on your TV while listening
to the sound through your JVC Micro Component System.
• If you play an NTSC CD in PAL AUTO mode on a PAL exclusive
TV, the image may be distorted. If this happens change the CD
Player’s TV output mode to “PAL”.
Before playing video CDs
Make sure that the connection between the System and your TV is
correct. (See page 8)
• When you play an NTSC CD in PALAUTO mode on a multisystem
TV, the image may blink for a moment. This symptom occurs when
the System detects the formula of the CD and is not a malfunction.
• You can configure the current TV output mode anytime by pressing
the 7 button on the Unit for more than 2 seconds.
Setting the TV System
Playing Video CDs with the PBC Function
To view a picture of video CDs, it is required that you set your
CD player’s TV output mode according to your TV’s color
system.
The System provides Playback Control (PBC) which utilizes a
procedure (menu selection) programed into a VCD.
Relationship among the playable CDs, System’s TV
output mode and your TV’s color system:
What is the Playback Control (PBC) function?
PBC allows you to enjoy the following features:
• Menu-Driven Play
You can interact with the TV screen using a menu display to
select and play an entry.
• High resolution still image playback
You can display high-quality images four times clearer than
video pictures.
Playable CD Player’s TV output mode Your TV’s color system
NTSC/PAL
NTSC/PAL
NTSC/PAL
NTSC
NTSC
PAL
PAL
PAL AUTO
Multisystem
You can play video CDs with PBC function using the menu
screen (Menu-Driven Play) or without using the menu screen
(Continuous Play).
2
3
4
1 Turn off the power to put the System into
Standby mode.
• The playback operation procedure may differ depending on the video
CD you use.
• Sometimes due to improper manufacturing, video CDs will function
differently.
2 Press the 7 button on the Unit for more than 2
seconds.
The current TV output mode (“NTSC” for example) appears
on the display for five seconds.
Playing Video CDs with the PBC Function without
Using the Menu Screen (Continuous Play)
3 Within five seconds, press the ¢ NEXT or
PREV 4 button on the Unit to select the
System’s TV output mode.
You can play video CDs with PBC without using the menu
screen, as if the CDs had no PBC function.
Each time you press the button, the TV output mode changes
as follows:
NTSC O PAL O PAL AUTO O (back to beginning)
1 Load a video CD with PBC.
2 Press the SELECT CD 3/8 button.
NTSC:
for NTSC exclusive TV
for PAL exclusive TV
for multisystem TV
PAL:
PAL AUTO:
Program Play, Random Play, Repeating Tracks:
Select the mode by pressing the respective button on the Remote
Control in the same way as for audio CDs. (See pages 13 and 14)
4 Within five seconds, press the 7 button on the
Unit to apply the changes.
5 Turn on the TV and select the video input on
the TV.
6 Press the CD 3/8 SELECT button to turn on
the System.
“JVC VIDEO CD/CD PLAYER” screen will appear on the
TV without distortion.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
2. Press the ¢ NEXT/PREV 4 buttons to select the
item (“SEL XX”) and press the CD 3¥8 SELECT button
to play it back.
Playing Video CDs with the PBC Function Using
the Menu Screen (Menu-Driven Play)
Before playing, make sure that Repeat indicator “ ” or
“
” is not lit. If lit, press the REPEAT button on the
ALL
Remote Control until “PBC” appears on the display.
1 Load a video CD with PBC.
Do not press the SELECT CD 3/8 button yet.
On the Remote Control:
1. Press the VCD No +/– button to select the item
(“SEL XX”) you want to play.
2. Press the SELECT CD 3¥8 button to play it back.
2 Press “PBC” button on the remote control.
3 Press the SELECT CD 3/8 button.
“PLAY” appears on the display and the first menu will appear
on the TV screen.
• If you leave your System on its own, the TV screen will
change as follows:
Part of each movie
• The next track will be automatically played after the
current track is finished.
(Back to the
first Menu)
First Menu
Last Menu
• While a part of a movie is displayed on the TV in step 2,
pressing the SELECT button on the Unit or the Remote
Control causes the track being played to restart.
To return to the previous menu, press the
RETURN
button on the Unit or the
Control.
RETURN button on the Remote
To pause, press the SELECT CD 3/8 button on the Remote
Control.
To stop playback and return to the first menu, press the
RETURN button repeatedly.
To stop the video CD, press the 7.
To select other items during playback, repeat step 4.
4 To move through the next menu, press the
following buttons.
On the Unit:
Press the ¢ NEXT or PREV 4 button.
On the Remote Control:
Press the NEXT ¢ or PREV 4 button.
5 To select the item (track) in the menu and play
• Program Play, Random Play and Repeating Tracks cannot be
performed during Menu-Driven Play.
it, press the following buttons.
On the Unit:
1. Press the REV.MODE /VCD NUMBER button for more
than 2 seconds. “SEL 1” will blink on the display.
Basic Remote Control and Unit Button Functions for Menu-Driven Play:
Remote Control
PREV 4 / NEXT ¢
+ VCD No –
Unit*
Function
Move through menu.
PREV 4 / ¢ NEXT
REV.MODE /
VCD NUMBER
≠
Select a specific menu item.
PREV 4 / ¢ NEXT
Enters the selected video CD number or item. When a part of
movie is displayed on the TV screen, starts playing that track
from the beginning.
SELECT CD 3¥8
CD 3¥8 SELECT
RETURN
RETURN
Returns to the previous menu during playback.
* The PBC function button names on the unit and the remote control are printed in orange.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of playback using Playback Control (PBC)
1
2
3
Menu Screen
press
1
2
3
1
2
3
Moving
Picture
RETURN
1
2
To next screen
Still
press
1
2
3
1
2
Moving
Picture
Moving
Picture
Moving
Picture
Moving
Picture
Still
Picture
Moving
Picture
Moving
Picture
RETURN
Picture
To previous screen
press
RETURN
A selection menu is displayed when you start playing a video
CD with PBC. The selection menu shows a list of numbers for
Playing video CDs without the PBC Function
selection. Some video CDs may show moving pictures or a Basic playback procedures for video CDs are the same as for
divided screen.
audio CDs. (See page 12)
• When a list of numbers is displayed, selecting a number shows • When you start playing a video CD without PBC, “VIDEO
its contents.
CD” appears on the display.
• When a moving picture is displayed, pressing CD 3/8
SELECT when the part of the movie you desire is shown
plays the movie.
• When the selection menu is re-displayed after you have played
your selection, selecting a number again can replay its
contents. (Some video CDs may show the menu screen several
times)
• During playback of a video CD, the following operations may distort
the image on the TV screen.
Searching for the beginning of the track, Skipping tracks,
Stopping/pausing the tracks, or frame-by-frame playback.
When “NEXT” and “PREV” are shown, pressing ¢ NEXT
or PREV 4 can change the selection menu.
Various Functions to Enhance Your Enjoyment
• After playback, press
screen. After playback, pressing
RETURN to go back to the previous
RETURN for 2 seconds
You can use the following features using the Remote Control.
or more causes it to stop. Some video CDs may return you to
the menu screen shown before playback.
Frame-by-Frame Playback
Frame-by-Frame playback is possible only when moving
pictures (of the video CDs with or without PBC) are played.
• When a menu screen of a karaoke disc is displayed for about a few
minutes without any selection being made, it automatically starts
playing from the first song.
During playback, press the STILL button to pause the video
CD.
Each time you press the STILL button, the picture advances by
one frame. During Frame-by-Frame playback, no sound will
be heard.
• When using the REPEAT function, the PBC function is not available.
To resume Normal Play, press the SELECT CD 3/8 button.
• You cannot return to the previous frame.
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Display of Operating Status
You can view the current operating status on the TV screen.
Press the ON SCREEN button.
Pressing the above button alternates between on-screen display
ON and OFF.
• Once you have turned on the on-screen display, the track
number and playing time are always displayed on the TV
screen.
Viewing the Video Intro of Video CDs
You can check the contents of a video CD, watching the first
5 seconds of each track on the disc.
1 Play the video CD with or without PBC.
• Load the video CD with or without PBC.
• Press the SELECT CD 3/8 button, then press the 7
button.
2 Press the VIDEO INTRO button.
The Video Intro Play starts and the first 5 seconds portions
of the first nine tracks are played in sequence.
1
4
7
2
5
8
3
6
9
• If the video CD has more than nine tracks, the tracks whose
track number is greater than nine will be displayed on the
next page when the MULTI KEY > or NEXT ¢ is
pressed.
• This function is not available in PBC mode or during
playback.
To select a track during Video Intro Play, press the VCD
No +/– buttons on the Remote Control to select the track and
then press the SELECT CD 3/8 button. Continuous play starts
from the selected track. When you use the Unit, press the
REV.MODE/VCD NUMBER button and press the PREV 4
or ¢ NEXT buttons to select the track, then press the
CD 3/8 SELECT button.
To stop and cancel the Video Intro Play, press the 7.
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Tapes
You can playback type I, type II, and type IV tapes without To stop playing, press 7.
changing any settings.
To fast-wind to the left or to the right, press ¢ NEXT or
PREV 4 button.
The tape direction indicator (3 or 2) starts flashing quickly on
the display.
Playing Back a Tape
To remove the cassette, press 0 button for cassette deck.
1 Press 0 button for cassette deck.
To play both sides — Reverse Mode
You can set the deck to play just one side of a tape,
both sides once, or both sides continuously.
Press REV.MODE on the unit.
• Each time you press the button, reverse mode
changes as follows:
2 Put a cassette in with the exposed part of the
tape down.
:
The deck automatically stops after playing both
sides of the tape. (Stops when playback in the 2
direction is finished.)
:
:
The deck continues to play both sides of the tape
until 7 is pressed.
The deck automatically stops after playing one
side of the tape.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration may
occur and this tape easily jams in the pinch-rollers
and the capstans.
3 Close the cassette holder gently.
4 Press TAPE 2 3.
The unit automatically turns on and the tape play
starts. The tape direction indicator (3 or 2)
flashes slowly on the display.
• Each time you press the button, the tape
direction changes.
3 : plays the front side.
2 : plays the reverse side.
When the tape plays to the end, the deck automatically stops
if the reverse mode is set to
— Reverse Mode.”)
. (See “To play both sides
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
IMPORTANT:
Recording on a Tape
• It may be unlawful to record or playback copyrighted
material without the consent of the copyright owner.
• The recording level is automatically set correctly, so it is not
affected by the VOLUME, AHB (Active Hyper Bass) PRO,
and SOUND MODE settings. Thus, during recording you can
adjust the sound you are actually listening to without affecting
the recording level.
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• You can use type I tape for recording.
To protect your recording
Cassettes have two small tabs on
the back to protect from
unexpected erasure or re-
recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with adhesive
tape.
2 Close the cassette holder gently.
• If you want to record on both sides of a tape, see “To record
on both sides — Reverse Mode.”
3 Check the recording direction for the tape.
• If the tape direction is not correct, press TAPE 2 3 twice
then 7 to change the tape direction.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
4
Start playing the source — FM,AM or auxiliary
equipment connected to AUX jacks.
• When the source is CD, see “CD Direct Recording” on
page 21.
• Incomplete erasure
• Difficulty in recording
5 Press REC.
The REC indicator lights up on the display and
recording starts.
To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.
To stop recording, press 7.
Capstans
To remove the cassette, press 0 for cassette deck.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until the
indicator is lit.
Heads
• When using the reverse mode for recording, start recording
in the forward (3) direction first. Otherwise, recording will
stop when recording is done only on one side (reverse) of the
tape.
Pinch rollers
To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when
recording CDs or radio broadcasts, wind on the leader tape first to
ensure that the recording will be made without any music part lost.
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Direct Recording
To record on both sides — Reverse Mode
Press REV.MODE on the unit until the
indicator is lit.
Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have made for Program play.
• When using the reverse mode for CD Direct
Recording, start recording in the forward (3) direction first.
When the tape reaches its end while recording a song in the
forward direction (3), the last song will be re-recorded at the
beginning of the reverse side (2).
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
If you start recording on the reverse side (2), recording will
stop when recording is done only on one side (reverse) of the
tape.
When making SLEEP timer settings while doing CD
Direct recording
Set enough time to allow for the CD to finish playing, otherwise the
power will go off before recording is completed.
2 Place a disc correctly on the circle of the disc
tray, with its label side up.
One Track Recording
• If the current playing source is not from the CD player,
press CD 3/8 SELECT to select CD player source, then
press 7 to stop playing.
This recording method is convenient when you record tracks
while playing a CD.You can only record your favorite songs on
the tape.
• If you want to record on both sides of a tape, see “To record
on both sides — Reverse Mode.”
• If you do not want pauses of about 4 seconds recorded
between selections, press CD 3/8 SELECT twice. If
nothing is done, non-recorded pause will be automatically
recorded between selections.
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
CD source should not be playing on its own before recording.
3 Press REC.
The REC indicator lights up on the display and
recording starts.
After recording, the CD player and cassette deck
automatically stop.
2 Play the track on the CD you wish to record.
To stop CD Direct Recording, press 7. The tape stops after 4
seconds.
3 Press REC.
The CD player returns to the beginning of that
track and the track is recorded on the tape. After
recording, the CD player and cassette deck
automatically stop.
To remove the cassette, press 0 for the cassette deck.
4 Repeat steps 2 and 3 to record other tracks you
want.
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Multiplex CDs
If the source you are going to play is a multiplex CD, you can
use the Multiplex Sound function.
3 Play a multiplex CD.
To play a video CD with PBC, see page 15.
What is Multiplex Sound?
4 Adjust the main volume control to the loudness
you want.
In a multiplex CD orVCD, two separate languages are recorded
on the left and right channel. With this system, you can select
your choice of language you wish to listen to.
• If you want to record on a tape, carry out CD Direct
Recording or One Track Recording. (See page 21.)
1 Turn on the TV and select the video input on
the TV.
2 Press the MPX button on the remote control to
select the MPX mode.
Each time you press the button, MPX mode changes as
follows.
RCH MONO
MPX: LCH MONO
STEREO
LCH MONO: Only the left channel (instrumental parts) are
played through both speakers.
RCH MONO: Only the right channel (vocal parts) are
played through both speakers.
STEREO:
Normal stereo mode.
• You can also use MPX mode during playback.
• MPX status is not indicate on the display.
• To return to Normal stereo mode press the MPX button
on the remote control until “STEREO” appear on the
display.
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
There are three timers available — Daily Timer, Recording
Timer, and Sleep Timer.
2 Set the on-time you want the
unit to turn on at.
Before using the timers, you need to set the clock built in the
unit (see page 9). When you press TIMER on the unit for more
than 3 seconds, the display alternates between “ADJUST” and
“CLOCK” for about 5 seconds.
1) Press ¢ NEXT or PREV 4 to set the
hour, then press TIMER.
2) Press ¢ NEXT or PREV 4 to set the
minute, then press TIMER.
The unit enters off-time setting mode.
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
When the on-time comes, the unit automatically turns on
3 Set the off-time you want
the unit to turn off (on
standby) at.
(the
indicator flashes just before the on-time, and continues
flashing while the timer is operating.) Then, when the off-time
comes, the unit automatically turns off (on standby).
The timer setting remains in memory until you change it.
1) Press ¢ NEXT or PREV 4 to set the
hour, then press TIMER.
2) Press ¢ NEXT or PREV 4 to set the
minute, then press TIMER.
• When the DAILY indicator is lit on the display, the timer acts
as the Daily Timer. Once the Daily Timer has been set, it will
be activated at the same time everyday until the timer is turned
off.
• When the REC indicator is lit on the display, the timer acts as
the Recording Timer. After the Recording Timer has been
performed, the details of the setting remain stored but the
timer is turned off.
The unit enters source selecting mode.
4 Press ¢ NEXT or PREV
4 to select the timer mode
(Daily Timer or Recording Timer)
and the source to play, then press
TIMER.
• Each time you press ¢ NEXT or PREV 4,
the timer mode and the source change as
follows:
Before you start...
When using TUNER” as the source to play, make sure to
“
select the desired station before turning off the power.
DAILY
REC
TUNER
DAILY TAPE
TUNER
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 1 again.
DAILY
CD
DAILY TUNER: tunes into the last station you were listening
to. (Daily Timer)
On the unit ONLY:
REC TUNER: records the last station you were listening to.
(Recording Timer)
1 Press and hold TIMER for more than
3 seconds.
• Put a recordable cassette into the deck.
The timer ( ) indicator lights up, and the timer
mode indicator (DAILY or REC) and the current
on-time flash on the display.
DAILY CD:
plays a CD. (Daily Timer)
DAILY TAPE: plays a tape. (Daily Timer)
• Make sure that the tape direction is correct.
The unit enters on-time setting mode.
5 Press ¢ NEXT or PREV
4 to set the volume level.
• You can select the volume level
(“VOLUME 0” to “VOLUME 40” and “VOLUME –”). If
you select “VOLUME –,” the volume is set to the last
level when the unit has been turned off.
To turn off the volume while the Recording Timer
REC
(
TUNER) is working, set the volume level
“VOLUME 0”.
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press TIMER to complete the timer
Using Sleep Timer
setting.
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
7 Press
STANDBY/ON to turn off
the unit (on standby) if you have set
the timer with the unit turned on.
• When the timer turns on the unit, the timer
How Sleep Timer actually works
The unit automatically turns off after the specified time length
passes.
(
) indicator and the selected timer mode
indicator (DAILY or REC) start flashing.
On the remote control ONLY:
1 Press SLEEP.
To cancel the setting, press and hold TIMER until the timer
The time length until the shut-off time appears
and the SLEEP indicator lights up on the display.
• Each time you press the button, the time length changes
as follows:
(
) indicator goes off from the display.
• If the unit is turned on when the timer-on time comes
10
20
30
60
90
120
Timer does not work.
• When you unplug the AC power cord or if a power failure
Canceled
occurs
2 Wait for about 5 seconds after specifying the
The timer will be canceled. You need to set the clock first, then the
timer again.
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until the
desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until the SLEEP
indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source
Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.
– 24 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Handling discs
Cleaning the unit
• Remove the disc from its case by holding • Stains on the unit
it at the edge while pressing the center hole
lightly.
• Do not touch the shiny surface of the disc,
or bend the disc.
• Put the disc back in its case after use to
prevent warping.
Should be wiped off with a soft cloth. If the unit is heavily
stained, wipe it with a cloth soaked in water-diluted neutral
detergent and wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become damaged
or get its paint peeled off, be careful about the followings.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
• Be careful not to scratch the surface of
the disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substance such as insecticides
to it.
— DO NOT allow any rubber or plastic to remain in contact
with it for a long time.
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to clean
the disc.
Handling cassette tapes
• If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of
the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the
tape:
— In dusty places
— In direct sunlight or heat
— In moist areas
— On a TV or speaker
— Near a magnet
– 25 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such
as your dealer, for service.
Symptom
No sound is heard.
Cause
Action
• Connections are incorrect or loose.
• Check all connections and make corrections.
(See pages 6 to 8.)
• Headphones are connected.
• Antennas are disconnected.
• Disconnect the headphones.
Hard to listen to broadcasts because of noise.
• Reconnect the antennas correctly and
securely.
• The AM loop antenna is too close to the
unit.
• Change the position and direction of the
AM loop antenna.
• The FM antenna is not properly extended
and positioned.
• Extend the FM antenna at the best position.
The disc tray does not open or close.
The disc does not play.
The AC power cord is not plugged in.
The disc is placed upside down.
The disc is scratched or dirty.
Plug the AC power cord.
Place the disc with the label side up.
Clean or replace the disc. (See page 24.)
Turn on the unit.
The disc sound is discontinuous.
The cassette holder cannot be opened.
Power supply from the AC power cord has
been cut off while the tape was running.
Impossible to record.
Small tabs on the back of the cassette are
removed.
Cover the holes with adhesive tape.
Operations are disabled.
The built-in microprocessor may malfunction
due to external electrical interference.
Unplug the AC power cord and then plug it
back in.
Unable to operate the unit from the remote
control.
• The path between the remote control and
the remote sensor on the unit is blocked.
• The batteries are exhausted.
• Remove the obstruction.
• Replace the batteries.
Design and specifications are
subject to change without notice.
Specifications
UX-P38V (CA-UXP38V and SP-UXP38V)
Amplifier
General
Output Power
Power requirement
AC 110 V/AC 127 V/AC 220 V/
AC 230 V , adjustable with
the voltage selector, 50 Hz/60 Hz
55 W (at operation)
40 W (20 W + 20 W) at 4 Ω (MAX.)
36 W (18 W + 18 W) at 4 Ω (10 % THD)
Audio input sensitivity/Impedance (at 1 kHz)
Power consumption
Dimensions (approx.)
Mass (approx.)
AUX:
400 mV/48 kΩ
3.4 W (on standby)
Digital Output – OPTICAL DIGITAL OUT (For Hong Kong only)
Signal wave length: 660 nm
505 mm x 256 mm x 295 mm (W/H/D)
(20 1/8 in. x 10 1/8 in. x 11 5/8 in.)
8.5 kg (18.8 lbs)
Output level:
–21 dBm to –15 dBm
Speakers/Impedance
4 Ω – 16 Ω
Supplied Accessories
See page 6.
Tuner
FM tuning range
AM tuning range
87.50 MHz – 108.00 MHz
Speaker
Speaker units
Impedance
10 cm (3 15/16 in.) cone x 1
4 Ω
160 mm x 256 mm x 205 mm (W/H/D)
(6 5/16 in. x 10 1/8 in. x 8 in.)
2.1 kg (4.6 lbs)
At 9 kHz intervals: 531 kHz – 1 710 kHz
At 10 kHz intervals: 530 kHz – 1 710 kHz
Dimensions (approx.)
CD player
Dynamic range
Mass (approx.)
85 dB
Signal-to-noise ratio
Wow and flutter
90 dB
Immeasurable
Cassette deck
Frequency response
Normal (type I):
Wow and flutter
50 Hz – 14 000 Hz
0.15 % (WRMS)
– 26 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and
U.K.)
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC)
line voltage corresponds with the position of the voltage
selector switch provided on the outside of this equipment
and, if different, reset the voltage selector switch, to
prevent from a damage or risk of fire/electric shock.
0701AOKFLEJEM
EN, CH, TH
VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|