JVC Speaker System UX L30 User Manual

MICRO COMPONENT SYSTEM  
UX-L30—Consists of CA-UXL30 and SP-UXL30  
STANDBY / ON  
COMPACT  
DIGITAL AUDIO  
C D - R / R W P L A Y B A C K  
REC  
REV. MODE  
AHB PRO  
CLOCK/TIMER  
AUX/MD  
MICRO COMPONENT SYSTEM UX-L30  
VOLUME  
+
STANDBY/ON  
CD  
TAPE  
FM/AM  
1
4
2
5
8
3
6
DOWN  
UP  
DISPLA  
Y
BASS  
TREBLE  
CLOCK  
/TIMER  
7
9
PUSH  
OPEN  
0
10  
BASS  
+10  
SLEEP  
UP  
TREBLE  
A
U
T
O
R
E
V
E
R
S
E
7
4
¢
SET  
CANCEL  
DOWN  
3/8  
23  
TAPE  
CD  
FM/AM  
AUX/MD  
AUTO  
REV.MODE FM MODE PRESET  
0CD  
PRGM  
RANDOM REPEAT  
AHB PRO  
DIMMER  
VOLUME  
RM-SUXL30U REMOTE CONTROL  
PHONES  
SP-UXL30  
CA-UXL30  
SP-UXL30  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
GVT0080-005A  
[A]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT FOR LASER PRODUCTS  
REPRODUCTION OF LABELS  
1 CLASSIFICATION LABEL, PLACED ON EXTERIOR  
SURFACE  
2 WARNING LABEL, PLACED INSIDE THE UNIT  
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
CAUTION: Invisible laser  
radiation when open and  
interlock failed or defeated.  
AVOID DIRECT EXPOSURE  
VARNING: Osynlig laser-  
strålning när denna del är  
öppnad och spärren är  
jalukitus ohitettaessa olet  
alttiina  
lasersäteilylle. Älä katso  
säteeseen. (f)  
näkymättömälle  
urkopplad.  
Betrakta  
ej  
(s)  
telse for stråling  
(d)  
TO BEAM.  
(e)  
strålen.  
1. CLASS 1 LASER PRODUCT  
2. CAUTION: Invisible laser radiation when open and interlock failed  
or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user service-  
able parts inside the Unit; leave all servicing to qualified service  
personnel.  
CAUTION: Proper Ventilation  
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:  
1
2
3
Front:  
No obstructions and open spacing.  
Sides/ Top/ Back:  
No obstructions should be placed in the areas shown by the dimensions below.  
Bottom:  
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a  
height of 10 cm or more.  
Front view  
Side view  
15 cm  
15 cm  
15 cm  
15 cm  
1 cm  
1 cm  
15 cm  
UX-L30  
10 cm  
UX-L30  
– G-2 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
We would like to thank you for purchasing one of our JVC products.  
Before operating this unit, read this manual carefully and thoroughly to  
obtain the best possible performance from your unit, and retain this manual  
for future reference.  
Power sources  
• When unplugging from the wall outlet, always pull the  
plug, not the AC power cord.  
About This Manual  
This manual is organized as follows:  
• The manual mainly explains operations using the  
buttons on the remote control.  
DO NOT handle the AC power cord with wet  
hands.  
You can use the buttons both on the remote control and  
on the unit for the same operations if they have the  
same or similar names (or marks), unless mentioned  
otherwise.  
• Basic and common information that is the same for many  
functions is grouped in one place, and is not repeated in  
each procedure. For instance, we do not repeat the  
information about turning on/off the unit, setting the  
volume, changing the sound effects, and others, which are  
explained in the section “Common Operations” on pages 9  
and 10.  
Moisture condensation  
Moisture may condense on the lens inside the unit in the  
following cases:  
• After starting heating in the room  
• In a damp room  
• If the unit is brought directly from a cold to a warm place  
Should this occur, the unit may malfunction. In this case,  
leave the unit turned on for a few hours until the moisture  
evaporates, unplug the AC power cord, and then plug it in  
again.  
• The following marks are used in this manual:  
Gives you warnings and cautions to prevent  
from damage or risk of fire/electric shock.  
Also gives you information which is not good  
for obtaining the best possible performance  
from the unit.  
Others  
• Should any metallic object or liquid fall into the unit,  
unplug the unit and consult your dealer before operating  
any further.  
• If you are not going to operate the unit for an extended  
period of time, unplug the AC power cord from the wall  
outlet.  
Gives you information and hints you had better  
know.  
DO NOT disassemble the unit since there are no  
user serviceable parts inside.  
Precautions  
If anything goes wrong, unplug the AC power cord and  
consult your dealer.  
Installation  
• Install in a place which is level, dry and neither too hot nor  
too cold—between 5˚C and 35˚C.  
• Install the unit in a location with adequate ventilation to  
prevent internal heat built-up in the unit.  
• Leave sufficient distance between the unit and the TV.  
• Keep the speakers away from the TV to avoid interference  
with TV.  
DO NOT install the unit in a location near heat  
sources, or in a place subject to direct sunlight,  
excessive dust or vibration.  
– 1 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Location of the Buttons and Controls ....................... 3 Playing Back CDs (CD/CD-R/CD-RW).................. 13  
Remote Control .......................................................... 3  
Front Panel ................................................................. 4  
Playing Back the Entire CD—Normal Play ............. 13  
Basic CD Operations ................................................ 13  
Programming the Playing Order of the Tracks  
—Program Play .................................................. 14  
Playing at Random—Random Play ......................... 15  
Repeating Tracks—Repeat Play............................... 15  
Prohibiting Disc Ejection—Tray Lock .................... 15  
Getting Started............................................................ 6  
Supplied Accessories.................................................. 6  
Putting the Batteries into the Remote Control ........... 6  
Connecting Antennas ................................................. 6  
Connecting Speakers .................................................. 7  
Connecting Other Equipment..................................... 8  
Playing Back Tapes ................................................... 16  
Playing Back a Tape ................................................. 16  
Common Operations .................................................. 9  
Recording .................................................................. 17  
Setting the Clock ........................................................ 9  
Turning On the Power ................................................ 9  
Selecting the Sources and Starting Play ..................... 9  
Adjusting the Volume ............................................... 10  
Adjusting the Tone (Bass/Treble)............................. 10  
Reinforcing the Bass Sound ..................................... 10  
Selecting the Illumination Brightness ...................... 10  
Recording on a Tape ................................................. 17  
CD Direct Recording................................................ 18  
One Track Recording ............................................... 18  
Using the Timers ....................................................... 19  
Using Daily Timer and Recording Timer ................. 19  
Using Sleep Timer .................................................... 20  
Listening to FM and AM (MW/LW) Broadcasts ... 11  
Tuning in to a Station ............................................... 11  
Presetting Stations .................................................... 11  
Tuning in to a Preset Station .................................... 12  
Maintenance .............................................................. 21  
Troubleshooting ........................................................ 22  
Specifications............................................................. 22  
– 2 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location of the Buttons and Controls  
Become familiar with the buttons and controls on your unit.  
Remote Control  
See pages in the parentheses for details.  
Remote Control  
1 Number buttons  
2 BASS button (10)  
3 Multi operation buttons  
• UP, 4 (reverse skip), 7 (stop), ¢ (forward skip)  
and DOWN  
4 SET button (12, 14)  
STANDBY/ON  
DISPLAY  
1
4
3
6
2
5
8
8
9
p
q
w
1
CLOCK  
/TIMER  
7
9
5 Source buttons  
• CD 3/8, TAPE 2 3, FM/AM and AUX/MD  
Pressing one of these buttons also turns on the unit.  
6 0 CD (disc tray open/close) button (13)  
Pressing this button also turns on the unit.  
7 REV.MODE (reverse mode) button (16 – 18)  
+10  
10  
BASS  
SLEEP  
UP  
TREBLE  
2
3
7
4
¢
SET  
CANCEL  
8 STANDBY/ON  
9 DISPLAY button (9)  
p CLOCK/TIMER button (9, 19, 20)  
q SLEEP button (20)  
button (9, 20)  
DOWN  
4
5
e
23  
TAPE  
3/8  
CD  
FM/AM  
AUX/MD  
AUTO  
PRESET  
0CD  
REV.MODE FM MODE  
6
7
r
t
y
u
w TREBLE button (10)  
e CANCEL button (14)  
r AUTO PRESET button (11)  
t FM MODE button (11)  
PRGM RANDOM REPEAT  
AHB PRO  
y CD play mode buttons (14, 15)  
• PRGM (program), RANDOM and REPEAT  
u AHB (Active Hyper Bass) PRO button (10)  
i VOLUME + / – button (10)  
o DIMMER button (10)  
i
o
DIMMER  
VOLUME  
RM-SUXL30U REMOTE CONTROL  
– 3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Front Panel  
Front Panel  
q
w
STANDBY / ON  
1
COMPACT  
2
DIGITAL AUDIO  
CD-R/RW PLAYBACK  
e
r
t
3
4
REC  
REV. MODE  
AHB PRO  
CLOCK/TIMER  
AUX/MD  
MICRO COMPONENT SYSTEM UX-L30  
5
VOLUME  
6
+
y
u
CD  
TAPE  
FM/AM  
7
8
DOWN  
UP  
BASS  
TREBLE  
i
o
;
PUSH  
OPEN  
0
A
U
T
O
R
E
V
E
R
S
E
9
p
PHONES  
– 4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Window  
1
2
3
[
]
DAILY REC SLEEP REC  
ST  
BASS  
MONO  
PRGM  
RANDOM  
ALL  
8
7
6
5
4
See pages in the parentheses for details.  
Front Panel  
1 STANDBY/ON  
(9, 15, 20)  
Display Window  
button and STANDBY/ON lamp  
1 Timer indicators  
(timer), DAILY, REC and SLEEP  
2 Disc tray  
2 REC (recording) indicator  
3
REV.MODE (reverse mode) button (16 – 18)  
3 BASS indicator  
4 REC (recording) button (17, 18)  
5 Display window  
6 VOLUME + / – control (10)  
7 CD 3/8 (play/pause) button (9, 13, 15, 18)  
Pressing this button also turns on the unit.  
8 BASS button (10)  
4 Tape operation indicators  
2 3 (tape direction) and  
5 MONO indicator  
6 Main display  
• Shows the source name, frequency, etc.  
7 ST (stereo) indicator  
(reverse mode)  
9 Cassette holder  
8 CD play mode indicators  
p PHONES jack (10)  
• PRGM (program), RANDOM and  
q Remote sensor  
/
ALL (repeat one/repeat all)  
w 0 (disc tray open/close) button (13)  
Pressing this button also turns on the unit.  
e AHB (Active Hyper Bass) PRO button (10)  
r CLOCK/TIMER button (9, 19, 20)  
t AUX/MD button (9)  
Pressing this button also turns on the unit.  
y TAPE 2 3 button (9, 16, 17)  
Pressing this button also turns on the unit.  
u FM/AM button (9, 11, 12)  
Pressing this button also turns on the unit.  
i TREBLE button (10)  
STANDBY / ON  
o 0 PUSH OPEN (cassette holder open) portion (16 – 18)  
; Multi operation buttons  
COMPACT  
DIGITAL AUDIO  
CD-R  
/
RAYBACK  
REC  
SURROUND  
AHB PRO  
CLOCK/TIMER  
4 (reverse skip)/DOWN, 7 (stop)  
and ¢ (forward skip)/UP  
MICRO COMPONENT SYSTEM  
VOLUME  
When using the remote control, point it at  
the remote sensor on the front panel.  
– 5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Continued  
Supplied Accessories  
Connecting Antennas  
Make sure that you have all the following items.  
The number in the parentheses indicates the quantity of the  
pieces supplied.  
FM antenna  
ANTENNA  
• AM loop antenna (1)  
• FM antenna (1)  
• Remote control (1)  
EXT  
M LOOP  
FM antenna (supplied)  
• Batteries (2)  
FM 75  
COAXIAL  
If anything is missing, consult your dealer immediately.  
Putting the Batteries into the Remote Control  
Insert the batteries—R6(SUM-3)/AA(15F)—into the  
remote control, by matching the polarity (+ and –) on the  
batteries with the + and – markings on the battery  
compartment.  
1 Attach the FM antenna to the FM 75  
COAXIAL terminal.  
When the remote control can no longer operate the unit,  
replace both batteries at the same time.  
2 Extend the FM antenna.  
3 Fasten it up in the position which gives you  
the best reception, then fix it on the wall, etc.  
1
About the supplied FM antenna  
The FM antenna supplied with this unit can be used as temporary  
measure. If reception is poor, you can connect an outdoor FM  
antenna.  
R6(SUM-3)/AA(15F)  
To connect an outdoor FM antenna  
Before connecting it, disconnect the supplied FM antenna.  
2
Outdoor FM antenna  
(not supplied)  
3
Coaxial cable (not supplied)  
ANTENNA  
EXT  
M LOOP  
FM 75  
COAXIAL  
DO NOT use an old battery together with a new  
one.  
DO NOT use different types of batteries together.  
DO NOT expose batteries to heat or flame.  
DO NOT leave the batteries in the battery  
compartment when you are not going to use the  
remote control for an extended period of time.  
Otherwise, it will be damaged from battery  
leakage.  
A 75 antenna with coaxial type connector  
should be used.  
– 6 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM (MW/LW) antenna  
Connecting Speakers  
2
1
3
ANTENNA  
Vinyl-covered wire  
(not supplied)  
1
SPEAKERS  
RIGHT  
LEFT  
AM EXT  
AM LOOP  
Speaker cord  
Speaker cord  
FM75  
COAXIAL  
SPEAKER  
IMPEDANCE  
MIN  
6
Right speaker  
Left speaker  
2
AM loop antenna  
(supplied)  
1 Press and hold the clamp of the speaker  
terminal on the rear of the unit.  
1 Connect the AM loop antenna to the AM  
LOOP terminals as illustrated.  
• If cords are covered with insulation, twist  
the core of the cord at the end of each cord,  
then remove the insulation.  
2 Insert the end of the speaker cord to the  
terminal.  
Match the polarity between the unit and the speaker  
terminals: (+) to (+) and (–) to (–).  
• If cords are covered with insulation, twist  
the core of the cord at the end of each cord,  
then remove the insulation.  
2 Turn the AM loop antenna until you have the  
best reception.  
3 Release the finger from the clamp.  
To connect an outdoor AM (MW/LW) antenna  
When reception is poor, connect a single vinyl-covered wire  
to the AM EXT terminal and extend it horizontally. (The AM  
loop antenna must remain connected.)  
IMPORTANT: Use only speakers with the same speaker  
impedance as indicated by the speaker terminals on the  
rear of the unit.  
For better reception of both FM and AM (MW/LW)  
• Make sure the antenna conductors do not touch any other  
terminals and connecting cords.  
• Keep the antennas away from metallic parts of the unit,  
connecting cords, and the AC power cord.  
– 7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove the speaker grilles  
To connect audio equipment with an optical digital  
input terminal  
You can record CD sound onto the connected digital  
equipment.  
The speaker grilles are removable.  
Holes  
Projections  
OPTICAL DIGITAL  
Protective plug  
OUT  
Before connecting the other  
equipment, remove the protective plug  
from the terminal.  
Speaker grille  
Audio equipment with  
an optical digital input  
To optical digital input  
To remove the speaker grille, insert your fingers at the top  
of the speaker grille, pull towards you. Then pull the bottom  
towards you.  
Connect an optical digital cord (not supplied) between the  
optical digital input terminal on the other equipment and the  
OPTICAL DIGITAL OUT terminal.  
To attach the speaker grille, put the projections of the  
speaker grille into the holes of the speaker.  
Now, you can plug the AC power cord.  
Connecting Other Equipment  
You can connect both of the analog and digital equipment.  
IMPORTANT: Be sure to check all connections to be done  
before plugging the AC power cord into a wall outlet.  
DO NOT connect any equipment while the power  
is on.  
DO NOT plug in any equipment until all  
connections are complete.  
To connect audio equipment  
Be sure that the plugs of the audio cords are colored: White  
plugs and jacks are for left audio signals, and red ones for  
right audio signals.  
R
L
AUX  
R
L
To audio output  
L
Audio equipment  
R
For playing the other equipment through this unit,  
connect between the audio output jacks on the other  
equipment and AUX jacks by using audio cords (not  
supplied).  
8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Operations  
To adjust the clock again  
Setting the Clock  
1 Make sure (timer) indicator is not lit on the display.  
• If it is lit, press and hold CLOCK/TIMER until it goes  
off.  
Before operating the unit any further, first set the clock built  
in this unit. When you plug the AC power cord into the wall  
outlet, “0:00” starts flashing on the display.  
You can set the clock whether the unit is on or off.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
2 Press CLOCK/TIMER repeatedly until the unit enters  
the clock setting mode (the hour digit start flashing on  
the display).  
First time you press CLOCK/TIMER, the unit enters the  
timer setting mode.  
• See pages 19 and 20.  
3 Repeat steps 2 and 3 of the procedure of “Setting the  
Clock.”  
CLOCK  
/TIMER  
1 Press CLOCK/TIMER.  
The hour digits start flashing on the display.  
4 Press and hold CLOCK/TIMER again so that  
(timer) indicator goes off from the display.  
CLOCK/TIMER  
Turning On the Power  
2 Press UP or DOWN to adjust the  
hour, then press CLOCK/TIMER.  
The minute digits start flashing on the display.  
When you press the play button—CD 3/8, TAPE 2 3,  
FM/AM and AUX/MD, the unit automatically turns on and  
starts playback if the source is ready.  
UP  
DOWN  
UP  
STANDBY/ON  
To turn on the unit, press  
STANDBY / ON  
STANDBY/ON  
.
DOWN  
The STANDBY/ON lamp lights  
green and “HELLO” appears on the  
display.  
CLOCK  
/TIMER  
CLOCK/TIMER  
To turn off the unit (on standby), press  
STANDBY/ON  
again.  
The STANDBY/ON lamp lights red and “GOOD BYE”  
appears on the display.  
• “0:00” flashes on the display until you set the built-in  
clock. After setting the clock, the clock time will appear on  
the display while the unit is on standby.  
• A little power is always consumed even while the unit is on  
standby.  
3 Press UP or DOWN to adjust the minute,  
then press CLOCK/TIMER.  
To switch off the power supply completely, unplug the AC  
power cord from the AC outlet.  
When you unplug the AC power cord or if a power  
failure occurs  
The clock is reset to “0:00” right away, while the tuner preset  
stations (see page 11) will be erased in a few days.  
To check the clock time during play  
On the remote control ONLY:  
DISPLAY  
Press DISPLAY.  
• Each time you press the button, the source  
indication and the clock time alternate on the display.  
Selecting the Sources and Starting Play  
To play back CDs, press CD 3/8. (See pages 13 – 15.)  
To play back tapes, press TAPE 2 3. (See page 16.)  
To listen to FM/AM (MW/LW) broadcasts, press FM/AM.  
(See pages 9 – 10.)  
• When you unplug the AC power cord or if a power failure  
occurs  
The clock is reset to “0:00” right away. If this happens, set the  
clock again.  
To select the external equipment as the source, press  
AUX/MD.  
23  
TAPE  
3/8  
CD  
FM/AM  
AUX/MD  
• The clock may gain or lose 1 to 2 minutes per month  
If this happens, set the clock again.  
When you press the play button for a particular source  
(CD 3/8, TAPE 2 3, FM/AM and AUX/MD), the unit turns  
on (and the unit starts playing the source if it is ready).  
9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Volume  
Reinforcing the Bass Sound  
You can adjust the volume level only while the unit is turned  
on. The volume level can be adjusted between “VOL MIN”  
and “VOLUME 1” – “VOLUME 40 (VOL MAX).”  
You can reinforce the bass sound to maintain rich, full bass at  
low volume.  
• This function only affects the playback sound, but does not  
affect your recording.  
When using the remote control, press  
VOLUME + to increase the volume or press  
VOLUME – to decrease it.  
AHB PRO  
To get the effect, press AHB (Active Hyper Bass)  
PRO until “AHB 1” or “AHB 2” appears on the  
display. The BASS indicator also lights up on the  
display.  
VOLUME  
When using the unit, turn VOLUME + / –  
clockwise (+) to increase the volume or  
AHB PRO  
• Each time you press the button, the bass sound  
VOLUME  
counterclockwise (–) to decrease it.  
change as follows:  
AHB 1  
AHB OFF  
(Canceled)  
AHB 2  
BASS  
+
For private listening  
Connect the headphones to the PHONES jack. No sound comes out  
of the speakers. Be sure to turn down the volume before connecting  
or putting on headphones.  
“AHB 2” has much more bass reinforcement effect than  
“AHB 1.”  
DO NOT turn off (on standby) the unit with the  
volume set to an extremely high level; otherwise, a  
sudden blast of sound can damage your hearing,  
speakers and/or headphones when you turn on the  
unit or start playing any source next time.  
REMEMBER you cannot adjust the volume level  
while the unit is on standby.  
To cancel the effect, press AHB PRO until “AHB OFF”  
appears on the display and the BASS indicator goes off.  
Selecting the Illumination Brightness  
You can change the illumination brightness only while the  
unit is turned on.  
Adjusting the Tone (Bass/Treble)  
On the remote control ONLY:  
You can adjust the bass level (low frequency range) and the  
treble level (high frequency range) within the range of –5 to  
+5. Normally set these to 0 (initial setting at factory).  
• This function only affects the playback sound, but does not  
affect your recording.  
DIMMER  
To change the brightness, press DIMMER.  
• Each time you press the button, the illumination  
dims and brightens alternately.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
1 Press BASS to adjust the bass level or press  
TREBLE to adjust the treble level.  
TREBLE  
BASS  
BASS  
TREBLE  
2 Press UP to increase the level or press DOWN  
to decrease it.  
DOWN  
UP  
UP  
DOWN  
10 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to FM and AM (MW/LW) Broadcasts  
Tuning in to a Station  
Presetting Stations  
You can preset 30 FM and 15 AM (MW/LW) stations—  
using either automatic presetting or manual presetting.  
In some cases, test frequencies have been already memorized  
for the tuner since the factory examined the tuner preset  
function before shipment. This is not a malfunction.  
You can preset the stations you want into memory by  
following the presetting method.  
FM/AM  
1 Press FM/AM to select the band.  
The unit automatically turns on and tunes in to  
the previously received station (either FM or  
AM—MW/LW).  
• Each time you press the button, the band  
alternates between FM and AM (MW/LW).  
FM/AM  
To preset stations automatically—Automatic Presetting  
You need to preset stations separately for the FM and AM  
(MW/LW) bands.  
4
¢
2 Press and hold ¢ or 4  
for more than 1 second.  
The unit starts searching for stations  
and stops when a station of  
On the remote control ONLY:  
FM/AM  
1 Press FM/AM to select the band you  
want to preset.  
DOWN  
UP  
sufficient signal strength is  
tuned in.  
If a program is broadcast in  
stereo, the ST (stereo)  
indicator lights up.  
AUTO  
PRESET  
2 Press and hold AUTO PRESET for  
more than 2 seconds.  
To stop searching, press ¢ or 4.  
Local stations with strong signals are searched  
and stored in memory automatically.  
When automatic presetting is over, the station  
stored in preset number 1 is received.  
When you press ¢ or 4 briefly and repeatedly  
The frequency changes step by step.  
3 Repeat steps 1 and 2 to store stations for the  
To change the FM reception mode  
On the remote control ONLY:  
other band.  
FM MODE  
When an FM stereo broadcast is hard to receive or  
noisy, press FM MODE so that the MONO  
indicator lights up on the display. Reception  
improves.  
• When you cannot automatically store stations you want  
Stations with weak signals cannot be detected with this automatic  
presetting. To store such a station, use the manual presetting.  
• When you unplug the AC power cord or if a power failure  
occurs  
MONO  
Preset stations with the automatic presetting are erased at once. If  
this happens, preset the stations again.  
To restore the stereo effect, press FM MODE again so that  
the MONO indicator goes off. In this stereo mode, you can  
hear stereo sounds when a program is broadcasted.  
11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To preset stations manually—Manual Presetting  
You need to preset stations separately for the FM and AM  
(MW/LW) bands.  
Tuning in to a Preset Station  
On the remote control ONLY:  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 2  
again.  
1 Press FM/AM to select the band.  
The unit automatically turns on and tunes in to  
the previously received station (either FM or  
AM—MW/LW).  
FM/AM  
On the remote control ONLY:  
• Each time you press the button, the band alternates  
between FM and AM (MW/LW).  
1 Tune in to the station you want to preset.  
• See “Tuning in to a Station” on page 11.  
UP  
2 Press UP or DOWN to select a  
SET  
2 Press SET.  
preset number.  
DOWN  
To tune a preset number directly using the number  
buttons  
On the remote control ONLY:  
UP  
3 Press UP or DOWN to select a  
Pressing the number button(s) allows  
you to select a preset number you want.  
Ex.: For preset number 5, press 5.  
For preset number 15, press +10,  
then 5.  
1
4
3
6
2
5
8
preset number.  
DOWN  
7
9
For preset number 20, press +10,  
then 10.  
For preset number 30, press +10,  
+10, then 10.  
+10  
10  
SET  
4 Press SET again.  
The tuned station in step 1 is stored in the preset number  
selected in step 3.  
• Storing a new station on a used number erases the  
previously stored one.  
When you unplug the AC power cord or if a power  
failure occurs  
The tuner preset stations will be erased in a few days. If this  
happens, preset the stations again.  
12 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back CDs (CD/CD-R/CD-RW)  
3/8  
This unit has been designed to playback the following CDs:  
• CD  
• CD-R  
• CD-RW  
CD  
3 Press CD 3/8.  
The disc tray automatically closes and the first  
track of the CD starts playing.  
CD  
Continued use of irregular shape CDs  
(heart-shape, octagonal, etc.) can damage the unit.  
Track number Elapsed playing time  
General Notes  
In general, you will have the best performance by keeping  
your CDs and the mechanism clean.  
• Store CDs in their cases, and keep them in cabinets or on  
shelves.  
• The CD automatically stops when the last track of the  
CD has finished playing.  
To stop playing, press 7.  
• Keep the unit’s disc tray closed when not in use.  
BASS  
When playing a CD-R or CD-RW  
User-edited CD-Rs (CD-Recordable) and CD-RWs  
(CD-ReWritable) can be played back only if they are already  
“finalized.”  
Total track number  
Total playing time  
You can play back your original CD-Rs or CD-RWs  
recorded in music CD format. However, they may not be  
played back depending on their characteristics or recording  
conditions.  
To remove the disc, press 0 CD on the remote control (or 0  
on the unit).  
• Before playing back CD-Rs or CD-RWs, read their  
instructions or cautions carefully.  
• Some CD-Rs or CD-RWs may not be played back on this  
unit because of their disc characteristics, damage or stain  
on them, or if the player’s lens is dirty.  
• If the CD cannot be read correctly (because it is scratched, for  
example) or an unreadable CD-R or CD-RW is inserted  
Playback will not start.  
• CD-RWs may require a longer readout time. This is caused  
by the fact that the reflectance of CD-RWs is lower than for  
regular CDs.  
• If no CD is inserted  
“NO DISC” appears on the display.  
If the loaded CD has more than 21 tracks and you select 21st  
track or above  
“– –:– –” appears on the display instead of the playing time.  
Playing Back the Entire CD—Normal Play  
DO NOT try to open or close the CD tray by hand  
as it will be damaged.  
0CD  
1 Press 0 CD on the remote control  
(or 0 on the unit).  
The unit automatically turns on and the disc  
tray comes out.  
Basic CD Operations  
While playing a CD, you can do the following operations.  
2 Place a disc correctly on the circle of  
the disc tray, with its label side up.  
To stop playing for a moment  
Press CD 3/8.  
3/8  
CD  
CD  
While pausing, the elapsed playing time  
flashes on the display.  
To resume playing, press CD 3/8 again.  
CORRECT  
INCORRECT  
To go to another track  
Press ¢ or 4 repeatedly.  
¢ :  
4
¢
• When using a CD single (8 cm), place it on the inner  
circle of the disc tray.  
Skips to the beginning of the  
next or succeeding tracks.  
4 :  
DOWN  
UP  
Goes back to the beginning of  
the current or previous tracks.  
– 13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To go to another track directly using the number  
buttons  
On the remote control ONLY:  
4 Repeat step 3 to program other tracks you  
want.  
3/8  
CD  
5 Press CD 3/8.  
Pressing the number button(s) allows  
you to start playing the track number  
you want.  
Ex.: For track number 5, press 5.  
For track number 15, press  
+10, then 5.  
1
4
3
6
2
5
8
The tracks are played in the order you have  
programed.  
7
9
To stop playing, press 7.  
+10  
10  
For track number 20, press  
+10, then 10.  
For track number 32, press  
+10, +10, +10, then 2.  
To exit from Program Play mode, press PRGM before or  
after playing. The PRGM (program) indicator goes off.  
To erase the program, press 7 twice.  
• Disc ejection also erases the program.  
To locate a particular point in a track  
During play, press and hold ¢  
or 4.  
4
¢
If you try to program the 21st track  
“FULL” will appear on the display.  
¢ : Fast-forwards the tracks.  
4 : Fast-reverses the tracks.  
DOWN  
UP  
To check the program contents  
4
¢
You can check the program contents  
by pressing ¢ or 4 before or  
after playback.  
Programming the Playing Order of the Tracks  
¢ :  
Program Play  
DOWN  
UP  
To check the contents in the  
programmed order.  
4 :  
You can arrange the order in which tracks play before you  
start playing. You can program up to 20 tracks.  
To check the contents in the  
reverse order.  
On the remote control ONLY:  
To modify the program  
1 Load a CD.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
On the remote control ONLY:  
CANCEL  
Before or after playing, you can erase the last  
programed track by pressing CANCEL.  
• Each time you press the button, the last  
programed track is erased from the program.  
PRGM  
2 Press PRGM (program).  
The PRGM (program) indicator lights up on the  
display.  
To add tracks in the program before playing, simply select  
the track numbers you want to add by following step 3 of the  
programming procedure.  
ST  
PRGM  
• If a program has been stored in memory, the program is  
called up.  
UP  
3 Press UP or DOWN to select the  
track number, then press SET.  
You can select the track number directly  
DOWN  
using the number buttons. (See “To go to  
another track directly using the number  
buttons.”)  
SET  
ST  
PRGM  
Track number  
Program step number  
– 14 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing at RandomRandom Play  
Repeating TracksRepeat Play  
The tracks will play in no particular order when you use this  
mode.  
You can have all the tracks, the program or individual track  
currently playing to repeat as many times as you like.  
On the remote control ONLY:  
On the remote control ONLY:  
REPEAT  
To repeat playing, press REPEAT before or  
during playing.  
• Each time you press the button, Repeat Play  
mode changes as follows, and the following  
indicator lights up on the display:  
1 Load a CD.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
RANDOM  
2 Press RANDOM.  
The RANDOM indicator lights up on the  
ALL  
display and the tracks start playing at random.  
Canceled  
3/8  
:
Repeats one track.  
3 Press CD 3/8.  
CD  
ALL : In Normal Play mode, repeat all the tracks.  
In Program Play mode, repeat all the tracks in  
the program.  
ST  
RANDOM  
In Random Play mode, repeats all the tracks in  
random order.  
Random Play ends when all the tracks are played once.  
To stop playing, press 7.  
To skip the current track, press ¢.  
You cannot go back to the previous track by pressing 4.  
To cancel Repeat Play mode, press REPEAT repeatedly  
until the repeat indicator goes off.  
• Repeat Play mode remains in effect even when you change  
the play mode.  
To stop playing, press 7.  
To exit from Random Play mode, press RANDOM again  
before or after playing. Random Play mode is canceled and  
Normal Play resumes.  
• In Random Play  
cannot be selected. If  
has been  
selected when you press RANDOM, it is canceled.  
• The RANDOM indicator goes off.  
Prohibiting Disc EjectionTray Lock  
You can lock the disc tray and prohibit to eject the CD.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before performing the procedure below.  
On the unit ONLY:  
To prohibit disc ejection, press  
STANDBY/ON  
while holding 7.  
• If the disc tray is opened, close it first.  
STANDBY / ON  
To cancel the prohibition and unlock the  
CD, press STANDBY/ON  
while holding 7.  
If you try to eject the CD while Tray Lock is in use  
“LOCKED” appears to inform you that the disc tray is locked.  
– 15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Tapes  
You can play back type I, type II, and type IV tapes without  
changing any settings.  
To stop playing, press 7.  
To fast-wind to the left or to the right, press ¢ or 4  
while the tape is not running.  
The tape direction indicator (3 or 2) starts flashing quickly  
on the display.  
Playing Back a Tape  
To remove the cassette, press 0 PUSH OPEN on the unit.  
1 Press 0 PUSH OPEN on the unit.  
To play both sidesReverse Mode  
PUSH  
0
OPEN  
You can set the deck to play just one side of a tape, both sides  
once, or both sides continuously.  
REV.MODE  
Press REV.MODE.  
• Each time you press the button, reverse mode  
changes as follows:  
REV. MODE  
:
The deck automatically stops after  
playing both sides of the tape. Stops when  
playback in the 2 direction is finished.  
The deck continues to play both sides of the  
tape until 7 is pressed.  
2 Put a cassette in with the exposed part of the  
tape down.  
:
:
The deck automatically stops after playing one  
side of the tape.  
The use of the C-120 or thinner tape is not  
recommended, since characteristic deterioration  
may occur and this tape easily jams in the pinch-  
rollers and the capstans.  
3 Press 0 PUSH OPEN again.  
23  
TAPE  
4 Press TAPE 2 3.  
The unit automatically turns on and the tape  
starts playing. The tape direction indicator  
(3 or 2) flashes slowly on the display.  
• Each time you press the button, the tape  
TAPE  
direction changes.  
3 :  
2 :  
plays the front side.  
plays the reverse side.  
When the tape plays to the end, the deck automatically  
stops if the reverse mode is set to  
play both sides—Reverse Mode.”)  
or  
. (See “To  
If no cassette is inserted  
“NO TAPE” appears on the display.  
– 16 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
IMPORTANT:  
Recording on a Tape  
It may be unlawful to record or play back copyrighted  
material without the consent of the copyright owner.  
• The recording level is automatically set correctly, so it is  
not affected by the other sound settings. Thus, during  
recording you can adjust the sound you are actually  
listening to without affecting the recording level.  
• If recordings you have made have excessive noise or static,  
the unit may be too close to a TV. Increase the distance  
between the TV and the unit.  
On the unit ONLY:  
1 Put a recordable cassette in with the exposed  
part of the tape down.  
You can use type I tape for recording.  
To protect your recording  
Cassettes have two small tabs  
on the back to protect from  
unexpected erasure or re-  
recording.  
To protect your recording,  
remove these tabs.  
To re-record on a protected tape, cover the holes with  
adhesive tape.  
2 Close the cassette holder gently and check the  
recording direction for the tape.  
• If the tape direction is not correct, press TAPE 2 3  
twice then 7 to change the tape direction.  
• If you want to record on both sides of a tape, see “To  
record on both sides—Reverse Mode.”  
To keep the best recording and playback sound quality  
If the heads, capstans, and pinch rollers of the cassette decks  
become dirty, the following will occur:  
• Impaired sound quality  
• Discontinuous sound  
• Fading  
3 Start playing the source—FM, AM or  
auxiliary equipment connected to AUX jacks.  
• When the source is CD, see “CD Direct Recording” on  
page 18.  
• Incomplete erasure  
• Difficulty in recording  
REC  
4 Press REC (recording).  
The REC (recording) indicator lights up on  
the display and recording starts.  
To clean the heads, capstans, and pinch rollers  
Use a cotton swab moistened with alcohol.  
To stop recording, press 7.  
The tape stops after 4 seconds.  
Capstans  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To record on both sides—Reverse Mode  
Press REV.MODE (reverse mode) until the  
REV.MODE  
Heads  
indicator is lit.  
• When using the Reverse Mode for recording,  
start recording in the forward (3) direction  
Pinch Rollers  
REV. MODE  
first. Otherwise, recording will stop when  
To demagnetize the heads  
Turn off the unit, and use a head demagnetizer (available at  
electronics and audio shops).  
recording is done only on one side (reverse)  
of the tape.  
At the start and end of cassette tapes  
There is leader tape which cannot be recorded onto. Thus, when  
recording CDs or radio broadcasts, wind the leader tape first to  
ensure that the recording will be made without any music part lost.  
– 17 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Direct Recording  
One Track Recording  
Everything on the CD goes onto the tape in the order it is on  
the CD, or according to the order you have made for Program  
Play.  
This recording method is convenient when you record tracks  
while playing the CD. You can only record your favorite  
songs on the tape.  
On the unit ONLY:  
On the unit ONLY:  
1 Put a recordable cassette in with the exposed 1 Put a recordable cassette in with the exposed  
part of the tape down.  
part of the tape down.  
2 Load a CD.  
2 Play the track on the CD you wish to record.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
— If you do not want pauses of about 4 seconds  
recorded between selections, press CD 3/8 twice.  
Otherwise, non-recorded pause will be  
REC  
3 Press REC (recording).  
The CD player returns to the beginning of  
that track and the track is recorded on the  
tape.  
automatically recorded between selections.  
• If you want to record on both sides of a tape, see “To  
record on both sides—Reverse Mode.”  
After recording, the CD player and cassette deck  
automatically stop.  
4 Repeat steps 2 and 3 to record other tracks  
REC  
3 Press REC (recording).  
you want.  
The REC (recording) indicator lights up on  
the display and recording starts.  
To stop while recording, press 7.  
The tape stops after 4 seconds.  
After recording, the CD player and cassette deck  
automatically stop.  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To stop while recording, press 7.  
The tape stops after 4 seconds.  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To record on both sides—Reverse Mode  
Press REV.MODE (reverse mode) until the  
indicator is lit.  
REV.MODE  
• When using the Reverse Mode for CD Direct  
Recording, start recording in the forward (3)  
direction first. When the tape reaches its end  
while recording a song in the forward  
direction (3), the last song will be re-  
recorded at the beginning of the reverse side (2).  
REV. MODE  
If you start recording on the reverse side (2), recording  
will stop when recording is done only on one side (reverse)  
of the tape.  
When making Sleep Timer settings while doing CD  
Direct recording  
Set enough time to allow for the CD to finish playing; otherwise the  
power will go off before recording is completed.  
– 18 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timers  
There are three timers available—Daily Timer, Recording  
Timer and Sleep Timer.  
Before using the timers, you need to set the clock built in the  
unit (see page 9).  
2 Set the on-time when you want the unit to  
turn on.  
1) Press UP or DOWN to set the hour, then press  
CLOCK/TIMER.  
2) Press UP or DOWN to set the minute, then press  
CLOCK/TIMER.  
The unit enters off-time setting mode.  
Using Daily Timer and Recording Timer  
UP  
DOWN  
UP  
You can set the timer whether the unit is on or off.  
When the on-time comes, the unit automatically turns on  
DOWN  
(
(timer) indicator flashes just before the on-time, and  
continues flashing while the timer is operating). Then, when  
the off-time comes, the unit automatically turns off (on  
standby).  
CLOCK  
/TIMER  
CLOCK/TIMER  
The timer setting remains in memory until you change it.  
• When the DAILY indicator is lit on the display, the timer  
acts as the Daily Timer. Once the Daily Timer has been set,  
it will be activated at the same time everyday until the timer  
is turned off.  
[
]
DAILY  
• When the REC indicator is lit on the display, the timer acts  
as the Recording Timer. After the Recording Timer has  
been performed, the details of the setting remain stored but  
the timer is turned off.  
3 Set the off-time when you want the unit to  
turn off (on standby).  
1) Press UP or DOWN to set the hour, then press  
CLOCK/TIMER.  
Before you start...  
When using “ TUNER” as the source to play, make sure to  
select the desired station before turning off the power.  
2) Press UP or DOWN to set the minute, then press  
CLOCK/TIMER.  
The unit enters source selecting mode.  
UP  
DOWN  
UP  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
DOWN  
CLOCK  
1 Press CLOCK/TIMER.  
/TIMER  
CLOCK  
/TIMER  
CLOCK/TIMER  
(timer) indicator lights up, and the timer  
mode indicator (DAILY or REC) and the  
current on-time flash on the display.  
CLOCK/TIMER  
The unit enters on-time setting mode.  
4 Press UP or DOWN to select the timer mode  
(Daily Timer or Recording Timer) and the  
source to play, then press CLOCK/TIMER.  
[
]
DAILY  
UP  
DOWN  
UP  
DOWN  
CLOCK  
/TIMER  
CLOCK/TIMER  
– 19 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Sleep Timer  
• Each time you press these buttons, the timer mode and  
the source change as follows:  
With Sleep Timer, you can fall asleep to music.  
You can set Sleep Timer when the unit is turned on.  
DAILY  
REC  
TUNER  
TUNER  
DAILY  
DAILY  
CD  
TAPE  
How Sleep Timer actually works  
The unit automatically turns off after the specified time  
length passes.  
DAILY TUNER : tunes in to the last station you were  
listening to. (Daily Timer)  
REC TUNER : records the last station you were listening  
to. (Recording Timer)  
On the remote control ONLY:  
• Put a recordable cassette into the deck.  
DAILY CD : plays a CD. (Daily Timer)  
• Load a CD.  
DAILY TAPE : plays a tape. (Daily Timer)  
• Make sure that the tape direction is correct.  
SLEEP  
1 Press SLEEP.  
The time length until the shut-off time appears  
and the SLEEP indicator lights up on the  
display.  
• Each time you press the button, the time length changes  
as follows:  
5 Press UP or DOWN to set the volume level,  
then press CLOCK/TIMER.  
SLEEP 10  
SLEEP 20  
SLEEP 30  
SLEEP 60  
SLEEP 90  
You can select the volume level (“VOLUME – –” and  
“VOLUME 0” to “VOLUME 40”).  
If you select “VOLUME – –,” the volume is set to the  
last level when the unit has been turned off.  
Canceled  
SLEEP120  
To turn off the volume while the Recording Timer  
(
“VOLUME 0.”  
2 Wait for about 5 seconds after specifying the  
REC TUNER) is working, set the volume level  
time length.  
The unit enters the clock setting mode.  
UP  
DOWN  
UP  
To check the remaining time until the shut-off time, press  
SLEEP once so that the remaining time until the shut-off time  
appears for about 5 seconds.  
DOWN  
To change the shut-off time, press SLEEP repeatedly until  
the desired time length appears on the display.  
CLOCK  
/TIMER  
CLOCK/TIMER  
To cancel the setting, press SLEEP repeatedly until the  
SLEEP indicator goes off.  
• Sleep Timer is also canceled when you turn off the unit.  
6 Adjust the clock.  
• See “Setting the Clock” on page 9.  
STANDBY/ON  
7 Press STANDBY/ON  
to  
• If you set the Sleep Timer after Daily Timer starts playing the  
selected source  
Daily Timer is canceled.  
• If you set the Sleep Timer after Recording Timer starts  
recording  
Recording Timer is canceled, but recording continues until Sleep  
Timer shuts off the power.  
turn off the unit (on standby) if  
you have set the timer with the  
unit turned on.  
STANDBY / ON  
• When the timer turns on the unit,  
(timer) indicator and the selected timer  
mode indicator (DAILY or REC) start  
flashing.  
To cancel the setting, press and hold CLOCK/TIMER until  
(timer) indicator goes off from the display.  
• If the unit is turned on when the timer-on time comes  
Timer does not work.  
• When you unplug the AC power cord or if a power failure  
occurs  
The timer will be canceled. You need to set the clock first, then  
the timer again.  
– 20 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.  
Handling discs  
Cleaning the unit  
• Remove the disc from its case by  
holding it at the edge while pressing  
the center hole lightly.  
• Do not touch the shiny surface of the  
disc, or bend the disc.  
• Stains on the unit  
Should be wiped off with a soft cloth. If the unit is heavily  
stained, wipe it with a cloth soaked in water-diluted neutral  
detergent and wrung well, then wipe clean with a dry cloth.  
• Since the unit may deteriorate in quality, become  
damaged or get its paint peeled off, be careful about the  
followings.  
• Put the disc back in its case after use  
to prevent warping.  
— DO NOT wipe it with a hard cloth.  
— DO NOT wipe it strong.  
— DO NOT wipe it with thinner or benzine.  
— DO NOT apply any volatile substance such as  
insecticides to it.  
• Be careful not to scratch the surface of  
the disc when placing it back in its  
case.  
• Avoid exposure to direct sunlight,  
temperature extremes, and moisture.  
— DO NOT allow any rubber or plastic to remain in  
contact with it for a long time.  
To clean the disc  
Wipe the disc with a soft cloth in a  
straight line from center to edge.  
DO NOT use any solvent—such as conventional record  
cleaner, spray, thinner, or benzine—to clean the disc.  
Handling cassette tapes  
• If the tape is loose in its cassette, take  
up the slack by inserting a pencil in  
one of the reels and rotating.  
• If the tape is loose, it may get  
stretched, cut, or caught in the  
cassette.  
• Be careful not to touch the tape  
surface.  
• Avoid the following places to store the  
tape:  
— In dusty places  
— In direct sunlight or heat  
— In moist areas  
— On a TV or speaker  
— Near a magnet  
– 21 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are having a problem with your unit, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,  
such as your dealer, for service.  
Symptom  
No sound is heard.  
Cause  
Action  
• Connections are incorrect or loose.  
• Check all connections and make  
corrections. (See pages 6 to 8.)  
• Disconnect the headphones.  
• Headphones are connected.  
• Antennas are disconnected.  
Hard to listen to broadcasts because of  
noise.  
• Reconnect the antennas correctly and  
securely.  
• The AM loop antenna is too close to the  
unit.  
• Change the position and direction of the  
AM loop antenna.  
• The FM antenna is not properly extended  
and positioned.  
• Extend the FM antenna at the best  
position.  
The disc tray does not open or close.  
The disc does not play.  
The AC power cord is not plugged in.  
The disc is placed upside down.  
The disc is scratched or dirty.  
Plug the AC power cord.  
Place the disc with the label side up.  
Clean or replace the disc. (See page 23.)  
Turn on the unit.  
The disc sound is discontinuous.  
The cassette holder cannot be opened.  
Power supply from the AC power cord has  
been cut off while the tape was running.  
Impossible to record.  
Small tabs on the back of the cassette are  
removed.  
Cover the holes with adhesive tape.  
Operations are disabled.  
The built-in microprocessor may  
malfunction due to external electrical  
interference.  
Unplug the AC power cord and then plug it  
back in.  
Unable to operate the unit from the remote  
control.  
• The path between the remote control and  
the remote sensor on the unit is blocked.  
• The batteries are exhausted.  
• Remove the obstruction.  
• Replace the batteries.  
Design and specifications are  
subject to change without notice.  
Specifications  
UX-L30 (CA-UXL30 and SP-UXL30)  
Cassette deck  
Frequency response:  
Normal (type I): 60 Hz – 14 000 Hz  
Amplifier  
Output Power:  
Wow and flutter:  
0.15% (WRMS)  
120 W (60 W + 60 W) at 6 (MAX.)  
100 W (50 W + 50 W) at 6 (10% THD)  
Audio input sensitivity/Impedance (at 1 kHz)  
General  
Power requirement:  
AC 240 V  
, 50 Hz  
AUX:  
400 mV/48 kΩ  
Power consumption:  
90 W (at operation)  
1.2 W (on standby)  
Digital output—OPTICAL DIGITAL OUT  
Signal wave length:660 nm  
Dimensions (approx.):  
170 mm x 286 mm x 319.5 mm (W/H/D)  
Mass (approx.): 12.7 kg  
Output level:  
Speakers/Impedance:  
–21 dBm to –15 dBm  
6 – 16 Ω  
Tuner  
Supplied Accessories  
FM tuning range: 87.50 MHz – 108.00 MHz  
AM tuning range:  
See page 6.  
MW:  
LW:  
522 kHz – 1 629 kHz  
144 kHz – 288 kHz  
Speaker  
Speaker units:  
Woofer:  
Tweeter:  
Main speaker:  
12.0 cm cone x 1  
4.0 cm cone x 1  
6 Ω  
CD player  
Dynamic range:  
Impedance:  
85 dB  
Dimensions (approx.):  
160 mm x 285 mm x 186.5 mm (W/H/D)  
Mass (approx.): 2.4 kg each  
Signal-to-noise ratio:  
Wow and flutter:  
90 dB  
Immeasurable  
– 22 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
EN  
0402MWMMDWJEM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Freezer UFAN 300 User Manual
Intel Computer Hardware HS 2601A User Manual
Intel Projection Television 8080 User Manual
Invacare Camping Equipment APM User Manual
Kenwood Juicer JE720 User Manual
Kenwood Marine Radio TK 5710 User Manual
Kenwood Marine Radio TS 930 S User Manual
Keys Fitness Home Gym KF FB User Manual
KitchenAid Dishwasher KUDE60FVBL0 User Manual
Konexx Telephone Office Konnector User Manual