JVC Speaker System UX G60 User Manual

MICRO COMPONENT SYSTEM  
UX-G60—Consists of CA-UXG60 and SP-UXG63  
UX-G55—Consists of CA-UXG55 and SP-UXG55  
UX-G60  
UX-G55  
SUPER VIDEO  
SUPER VIDEO  
INSTRUCTIONS  
GVT0169-006A  
[US,UN,UB,UG,UX,A,UW]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Contents  
Introduction..............................................................1  
Playable Disc/File Types .................................................... 2  
How to Read This Manual .................................................. 2  
Installation  
• Install the System in a location with adequate ventilation to  
prevent internal heat build-up in the System.  
Connections ..............................................................3  
Display Indicators....................................................6  
Daily Operations—Playback ..................................7  
DO NOT install the System in a location near  
heat sources, or in a place subject to direct  
sunlight, excessive dust or vibration.  
• Install in a place which is level, dry and neither too hot nor  
too cold—between 5°C and 35°C.  
• Leave sufficient distance between the System and the TV.  
• Keep the speakers away from the TV to avoid interference  
with the TV.  
Daily Operations—Sound & Other Adjustments .....12  
Adjusting the Volume ....................................................... 12  
Adjusting the Sound.......................................................... 12  
Creating 3-dimensional Sound Field—3D Phonic............ 13  
Presetting Automatic DVD Video Sound  
Power sources  
Increase Level ............................................................... 13  
Adjusting the Audio Input Level ...................................... 13  
Changing the Display Brightness...................................... 14  
Changing the Scanning Mode........................................... 14  
Changing the Picture Tone................................................ 14  
Setting the Clock............................................................... 15  
Turning Off the Power Automatically .............................. 15  
• When unplugging the System from the wall outlet, always  
pull on the plug, not the AC power cord.  
DO NOT handle the AC power cord with wet  
hands.  
Moisture condensation  
Moisture may condense on the lenses inside the System in  
the following cases:  
• After starting to heat the room  
• In a damp room  
• If the System is brought directly from a cold to a warm  
place.  
Should this occur, the System may malfunction. In this case,  
leave the System turned on for a few hours until the moisture  
evaporates, unplug the AC power cord, then plug it in again.  
Unique DVD/VCD Operations .............................16  
Selecting the Audio Track................................................. 16  
Selecting the Subtitle Language........................................ 17  
Selecting the View Angle ................................................. 17  
Selecting the Browsable Still Pictures .............................. 17  
Playing Back Bonus Group............................................... 17  
Making Dialogues Clear—Clear Voice ............................ 18  
Special Effect Playback .................................................... 18  
Advanced Playback Operations ...........................19  
Programming the Playing Order—Program Play ............. 19  
Playing at Random—Random Play .................................. 20  
Playing Repeatedly ........................................................... 21  
Prohibiting Disc Ejection—Child Lock............................ 21  
On-screen Disc Operations ............................................... 22  
Internal heat  
• Make sure there is good ventilation around the unit. Poor  
ventilation could overheat and damage the unit.  
DO NOT block the ventilation openings or  
holes. If they are blocked by a newspaper or  
cloth, etc., the heat may not be able to get out.  
Audio/Video File Operations ................................26  
Advanced Tape Operations ..................................28  
Recording on a Tape ......................................................... 28  
Synchronized Recording................................................... 29  
Others  
• Should any metallic object or liquid fall into the System,  
unplug the AC power cord and consult your dealer before  
operating any further.  
Enjoying Karaoke..................................................30  
Singing Along (Karaoke).................................................. 30  
Microphone Mixing .......................................................... 31  
Reserving Karaoke Songs—Karaoke Program Play......... 32  
DO NOT disassemble the System since there  
are no user serviceable parts inside.  
Timer Operations...................................................33  
Setup Menu Operations ........................................35  
• If you are not going to operate the System for an extended  
period of time, unplug the AC power cord from the wall  
outlet.  
If anything goes wrong, unplug the AC power cord and  
consult your dealer.  
Additional Information .........................................37  
Learning More about This System.................................... 37  
Troubleshooting ................................................................ 41  
Operating JVC’s TVs Using the Remote Control............. 43  
Specifications.................................................................... 44  
Parts Index ............................................................45  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
When playing a multi-channel encoded DVDs, the System  
properly converts these multi-channel signals into 2  
channels, and emits the downmixed sound from the  
speakers.  
To enjoy the powerful sound of these multi-channel  
encoded DVDs, connect a proper decoder or an amplifier  
with a proper built-in decoder to the OPTICAL DIGITAL  
OUT terminal on the rear.  
Playable Disc/File Types  
*
*
*
*
*
COMPACT  
IMPORTANT: Before playing a disc, make sure of  
the following...  
• Turn on the TV and select an appropriate input mode on  
the TV to view the pictures or on-screen displays.  
• For disc playback, you can change the initial setting to  
your preference. See “Setup Menu Operations” on  
page 35.  
DIGITAL VIDEO  
SUPER VIDEO  
DIGITAL AUDIO  
• CD-R/-RW: Recorded in the Audio CD, Video CD, and  
SVCD formats. MP3, WMA*, JPEG, MPEG-1,  
MPEG-2, ASF* and DivX files written in accordance  
with the “ISO 9660” format can also be played.  
• DVD-R/-RW, +R/+RW: Recorded in the DVD Video  
format. MP3, WMA*, JPEG, MPEG-1, MPEG-2, ASF*  
and DivX files written in the UDF format can also be  
played.  
• DVD-RW/-ROM: Recorded in the DVD Video  
Recording (VR) format.  
If “  
” appears on the TV screen when you press a  
button, the disc cannot perform the operation you have  
tried to do.  
How to Read This Manual  
• Button and control operations are explained in the table  
below.  
Some related tips and notes are explained later in the  
sections “Learning More about This System” and  
“Troubleshooting,” but not in the same section  
• USB mass storage class device*: MP3, WMA, JPEG,  
MPEG-1, MPEG-2, ASF and DivX files.  
In addition to the above discs/files, this System can playback  
audio data recorded on CD-Extra.  
• The following discs cannot be played back:  
DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,  
CD-G (CD-Graphics) and DVD/CD Text.  
Playing back these discs will generate noise and damage  
the speakers.  
• In this manual, “file” and “track” are interchangeably used  
for MP3/WMA*/JPEG/MPEG-1/MPEG-2/ASF*/DivX  
operations.  
• It is possible to playback finalized +R/+RW (DVD format  
only) discs. “DVD” lights on the front display panel when  
a +R/+RW disc is loaded.  
• For UX-G55, the unit cannot playback DVD-VR discs  
with CPRM (Content Protection for Recordable Media).  
About color system  
This System accommodates the NTSC and PAL system and  
can playback discs recorded in either the NTSC or the PAL  
system.  
explaining the operations (  
indicates that the  
INFO  
content has some information).  
Indicates that you press the button briefly  
.
Indicates that you press the button briefly and  
repeatedly until an option you want is  
selected.  
Indicates that you press one of the buttons.  
Indicates that you press and hold the button  
2sec.  
for a specified period.  
• To change the color system, see page 14.  
Note on Region Code  
DVD players and DVDs have their own Region Code  
numbers. This System can playback only DVDs with an  
appropriate Region Code number.  
• For details, see “Specifications” on page 44.  
EX.:  
Indicates that you turn the control toward the  
specified direction(s).  
Indicates that this operation is only possible  
using the remote control.  
Indicates that this operation is only possible  
using the main unit.  
Remote  
ONLY  
Main Unit  
ONLY  
“DVD Logo” is a trademark of DVD Format/Logo  
Licensing Corporation registered in the US, Japan and other  
countries.  
(For Central and South American countries and Australia)  
Audio formats  
The System can playback the following digital audio  
formats.  
Caution for DualDisc playback  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard. Therefore, the  
use of the Non-DVD side of a DualDisc in this product is not  
recommended.  
LPCM (Linear PCM)*,  
DIGITAL (Dolby Digital),  
DTS (Digital Theater Systems), MLP (Meridian Lossless  
Packing)*  
*
For UX-G60 only  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Do not connect the AC power cord until all other  
connections have been made.  
Supplied accessories  
Check to be sure that you have all the following items.  
• FM antenna (x1)  
• AM loop antenna (x1)  
• Composite video cord (x1)  
• Remote control (x1)  
• Batteries (x2)  
• AC plug adapter (x1) (except for the Middle East, Hong  
Kong region and Australia)  
• Connect VIDEO OUT directly to the video input of your  
TV. Connecting VIDEO OUT to a TV via a VCR may  
interfere with your viewing when playing back a copy-  
protected disc. Connecting VIDEO OUT to an integrated  
TV/VCR system may also interfere with your viewing.  
If any item is missing, consult your dealer immediately.  
Rear panel  
The illustration below is UX-G60.  
~ From AM/FM antenna  
See page 4.  
Ÿ From the speakers  
See page 4.  
! From the powered subwoofer  
See page 4.  
From the input of TV/monitor  
See page 5.  
Voltage selector (except for Hong Kong  
region and Australia)  
See page 5.  
VOLTAGE  
SELECTOR  
127V  
110V  
220V  
230V  
-240V  
@ From the digital input of digital  
audio component  
See page 5.  
¤ To a wall outlet  
Plug in the AC power cord only after  
all connections are completed.  
• If the wall outlet does not match the  
AC plug, use the supplied AC plug  
Front panel  
The illustration below is UX-G60.  
adapter (except for the Middle East  
Hong Kong region and Australia).  
,
Pull down the cover until you hear a clicking sound.  
From the portable audio device  
See page 5.  
From the USB mass storage class device (for UX-G60 only)  
See page 5.  
From the headphones  
See page 7.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
~ AM/FM antenna  
Ÿ Speakers  
To assemble the AM loop antenna  
• When connecting the speaker cords, match the polarity of  
the speaker terminals: red color to (+) and black color to (–).  
Press and hold  
To connect AM/FM antenna  
AM loop antenna  
(supplied)  
Insert  
Release  
Red  
From right  
speaker  
CAUTION:  
From left  
speaker  
Black  
FM antenna (supplied)  
• DO NOT connect more than one speaker to  
each terminal.  
• DO NOT push or pull the speakers as this  
will damage the foot spacers at the bottom  
of the speakers.  
Extend it so that you can obtain the best  
reception.  
For better AM/FM reception  
AM loop antenna (supplied)  
Keep it connected.  
! To connect the powered subwoofer  
SUBWOOFER  
OUT  
From the powered  
Vinyl-covered wire  
(not supplied)  
subwoofer  
(not supplied)  
Extend it horizontally.  
The subwoofer connected can reproduce the bass sounds  
recorded in front left and right channels, but cannot  
reproduce the LFE signals in DVD multi-channel discs.  
• Before plugging the unit to the main supply, make sure that  
the powered subwoofer is turned off.  
FM outdoor antenna  
(not supplied)  
• Disconnect the supplied FM antenna, and connect to an  
outdoor FM antenna using a 75 wire with coaxial type  
connector (IEC or DIN45325).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
• If an external device is not equipped with a stereo mini plug  
audio output, use a plug adaptor to convert the stereo mini  
plug to the corresponding plug of the audio output.  
TV/monitor  
Connect the COMPONENT (for UX-G60 only),  
S-VIDEO, or VIDEO jacks which you want to use.  
When connecting a USB mass storage class device  
(for UX-G60 only)  
Red  
At the front  
panel  
Blue  
USB cable  
(not supplied)  
Green  
Component video cord  
(not supplied)  
• You can connect a USB mass storage class device such as a  
USB flash memory device, hard disk drive, multimedia card  
reader, etc. to this System. See pages 10 and 38 for details.  
• To select progressive scanning mode (see page 14), use  
COMPONENT jacks.  
If you press USB MEMORY 3, the System detects the  
USB mass storage class device and the control screen  
appears on the TV screen. See page 26 for details.  
Composite video cord (supplied)  
Before plugging in the System  
(except for Hong Kong region and Australia)  
Set the correct voltage for your area with the voltage selector  
on the rear.  
Use a screwdriver to set the voltage  
selector to the same voltage as  
where you are plugging in the unit.  
(See also the back cover page.)  
S-Video cord (not supplied)  
VOLTAGE  
SELECTOR  
• After connecting a TV, select the proper video signal mode  
according to the connection method. See “Changing the  
Scanning Mode” on page 14.  
110V  
127V  
220V  
230V  
-240V  
@ Digital audio component  
Preparing the remote control  
Protective cap  
• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu  
correctly according to the connected digital audio  
equipment (see page 36). If the setting is incorrect, loud  
noise may be generated causing damage to the speakers.  
R6(SUM-3)/AA(15F)  
When connecting a portable audio device (AUX)  
• Dispose of batteries in the proper manner, according to  
federal, state, and local regulations.  
Stereo mini plug  
(not supplied)  
At the front  
panel  
DO NOT recharge, short, disassemble, heat  
the battery or dispose of it in a fire.  
When using the remote control  
Point the top of the remote control toward the remote sensor  
as directly as possible. If you operate it from a diagonal  
position, the operating range (approx. 5 m) may be shorter.  
• By using QP Link (Quick Portable Link), you can easily  
start playing back a portable audio device on this unit. See  
page 11 for details.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Indicators  
The indications on the display tell you a lot of things while you are operating the System.  
Before operating the System, be familiar with when and how the indicator illuminates on the display.  
1
2
3
4
5 6 7 8  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
TA NEWSINFO  
1 2 3  
REC  
1
PRGR. B.S.P. BONUS PRGM RND  
SLEEP  
A.STBY  
REC  
9 p q w ert  
y u  
i o ; a s  
1 QP Link (Quick Portable Link) indicator  
e AHB PRO indicator  
• Lights when QP Link is activated.  
2 Disc format indicators  
• Lights when Active Hyper Bass Pro is activated.  
r BONUS indicator*  
• SVCD: lights when playing back an SVCD.  
• VCD: lights when playing back a VCD.  
• CD: lights when playing back a CD.  
• DVD: lights when playing back a DVD.  
3 Audio file format indicators  
• Lights when a DVD Audio disc with a bonus group is  
detected  
.
t USB indicator*  
• Lights when “USB MEMORY” is selected as the source.  
y Playback mode indicators  
• MP3: lights when an MP3 track is detected.  
• WMA*: lights when a WMA track is detected.  
• PRGM: lights when Program Play is activated.  
• RND: lights when Random Play is activated.  
4 3D PHONIC indicator  
(repeat)1  
:
• Lights when 3D Phonic is activated.  
5 C.VOICE (Clear Voice) indicator  
• Lights when Clear Voice is activated.  
6 PG/PL indicators  
: lights when One Track/Chapter/Step Repeat is  
1
activated.  
: lights when One Group/Title/All Tracks Repeat is  
activated.  
• PG: lights when a DVD-VR formatted disc is called up.  
• PL: lights when a Play List recorded on a DVD-VR  
formatted disc is called up.  
u Indicators for Karaoke function*  
• MIC: lights when the microphone is connected.  
V.MASK (Voice Mask): lights when Voice Mask is  
activated.  
7 Radio band indicators  
• AM: lights when tuning in to an AM station.  
• FM: lights when tuning in to an FM station.  
8 FM reception indicators  
• ST (stereo): lights while an FM stereo station with  
sufficient signal strength is tuned in.  
• MONO: lights while receiving an FM stereo station in  
monaural.  
9 S.TURBO (Sound Turbo) indicator  
• Lights when Sound Turbo II is activated.  
p PRGR. (Progressive) indicator*  
i A.STBY (Auto Standby) indicator  
• Lights when Auto Standby is activated.  
• Flashes when disc playback stops with Auto Standby  
activated.  
o
REC indicator  
• Lights while recording.  
; 2 3 (tape direction) indicators  
Lights to indicate the current tape running direction.  
Flashes slowly during playback and recording.  
Flashes quickly while rewinding a tape.  
• Lights when the progressive scanning mode is selected.  
q Main display  
a
SLEEP indicator  
• Lights when the Sleep Timer is activated.  
• While listening to radio: band (or preset number) and  
station frequency appear.  
s Daily Timer indicators  
: lights when Daily Timer is on standby or is being set.  
• While selecting “AUX”: “AUX” appears.  
• While playing a disc or file: current status appears.  
• While selecting “TAPE”: “TAPE” appears.  
w B.S.P. (Browsable Still Picture) indicator*  
• Lights when Browsable Still Pictures are detected while  
playing a DVD Audio disc.  
• 1/2/3: lights when a Daily Timer (1, 2, or 3) is on standby;  
flashes while working or being set.  
• REC: lights when the Recording Timer stands by; flashes  
while working or being set.  
*
For UX-G60 only  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daily Operations—Playback  
Remote control  
Number  
In this manual, operations using the remote control are  
mainly explained; however, you can use the buttons  
and controls on the main unit if they have the same (or  
similar) name and marks.  
1
buttons  
RETURN  
ENTER/SET  
TOP MENU/PG  
1 Turn on the power.  
MENU/PL  
,
,
,
The STANDBY lamp on the main unit turns off.  
• Without pressing  
AUDIO, the System turns on  
by pressing one of the source buttons.  
2
• The System turns on and activates the AUX source  
by starting playback on an external device when QP  
Link is activated. (See page 11 for details.)  
GROUP/TITLE  
7
8
1,¡  
QP LINK  
SHIFT  
GROUP/TITLE SKIP  
4,¢  
FM/PLAY MODE  
2 Select the source.  
Playback automatically starts if the selected source is  
ready.  
3
• If you press AUX, start playback on the external  
component.  
3 Adjust the volume.  
1
4 Operate the target source as explained  
later.  
To turn off (standby) the unit  
The STANDBY lamp on the main unit  
lights in red.  
• A small amount of power is always  
consumed even while on standby.  
2
FM/AM  
/AUX  
USB  
DVD/CD MEMORY  
TAPE  
UX-G60  
You can reduce power consumption by pressing DIMMER  
(while holding SHIFT) to turn the display off while on  
standby.  
DVD/CD  
FM/AM  
TAPE  
AUX  
UX-G55  
• When the display is turned off, QP Link does not work.  
For private listening  
Connect a pair of headphones to the PHONES jack on the  
main unit. The sound will no longer come out of the  
speakers. Be sure to turn down the volume before  
connecting or putting on the headphones.  
• Disconnecting the headphones will activate the  
speakers again.  
3
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
F
S
1
TA NEWSINFO  
PRGR. B.S.P. BONUS PRGM RND  
TV VOL  
AUDIO VOL  
4
DO NOT turn off (standby) the System with  
the volume set to an extremely high level;  
otherwise, the sudden blast of sound may  
damage your hearing, speakers and/or  
headphones when you turn on the System or  
start playback.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select the band (FM or AM)  
UX-G60  
INFO  
Listening to the Radio  
Remote control:  
Main unit:  
Main Unit  
ONLY  
To set the AM tuner interval spacing  
Before operating the tuner, it is required to select the  
appropriate AM space interval used for your area.  
• This is possible only while the System is on standby.  
FM/AM  
/AUX  
FM/AM  
/AUX  
1 Select the AM band.  
UX-G55  
UX-G60  
Remote control:  
Main unit:  
FM/AM  
/AUX  
FM  
AUX  
AM  
AM  
FM/AM  
UX-G55  
FM  
FM/AM  
To tune in to a station  
While FM or AM is selected...  
Remote control:  
Main unit:  
2 Turn off the power.  
2 sec.  
2 sec.  
GROUP/TITLE SKIP  
DOWN  
UP  
3 Select the appropriate AM space interval for your  
area.  
Frequency starts changing on the display.  
When a station (frequency) with sufficient signal strength is  
tuned in, the frequency stops changing.  
• When you repeatedly press the button, the frequency  
changes step by step.  
7
DVD/CD  
3/8  
To stop searching manually, press either button.  
AM 9KHZ  
(9 kHz interval)  
Remote  
ONLY  
(while holding...)  
If the FM station has poor reception  
FM/PLAY  
MODE  
7
DISPLAY  
The MONO indicator lights on the display. Reception will  
improve though stereo effect is lost—Monaural reception.  
To restore the stereo effect, press the button again (the  
MONO indicator disappears).  
AM 10KHZ  
(10 kHz interval)  
(while holding...)  
Remote  
ONLY  
To preset the stations  
You can preset 30 FM and 15 AM stations.  
1 Tune in to a station you want to preset.  
• You can also store the monaural reception mode for  
FM preset stations if selected.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Activate the preset number entry mode.  
Playing Back a Tape  
ENTER/SET  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
To insert a tape  
You can playback type I tapes.  
REC  
SLEEP  
A.STBY  
REC  
Push  
Insert  
Close  
• Finish the following process while the indication on  
the display is flashing.  
3 Select a preset number for the station you store.  
Examples:  
To select preset number 5,  
press 5.  
To select preset number 10,  
press 10.  
To select preset number 15,  
press 10, 1, then 5.  
To select preset number 30,  
press 10, 3, then 0.  
1
4
3
2
5
8
0
With the tape side facing outside  
The illustration above is UX-G60.  
6
9
7
To start:  
To stop:  
10  
10  
• You can also use the ¡ or 1 button.  
4 Store the station.  
When “TAPE” is not selected as the  
current source, press twice.  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
ENTER/SET  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
REC  
To rewind/fast-forward the tape:  
SLEEP  
A.STBY  
Remote control:  
REC  
GROUP/TITLE SKIP  
Fast-forward the tape.  
Rewind the tape.  
Remote  
ONLY  
To tune in to a preset station  
1 Select the band (FM or AM).  
Main unit:  
UX-G60  
FM/AM  
DOWN  
/AUX  
Rewind the tape.  
FM  
AM  
AUX  
UP  
Fast-forward the tape.  
UX-G55  
FM  
AM  
2 Select the preset number for the station you stored.  
Examples:  
To select preset number 5,  
press 5.  
To select preset number 10,  
press 10.  
To select preset number 15,  
press 10, 1, then 5.  
To select preset number 30,  
press 10, 3, then 0.  
1
4
3
2
5
8
0
6
9
7
10  
10  
• You can also use the ¡ or 1 button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen guide icons  
• During DVD Video playback, the following icons may  
appear on the TV:  
INFO  
Playing Back a Disc/File  
Before operating a disc/file, be familiar how a disc/file is  
recorded.  
• DVD Video comprises of “Titles” which includes  
Chapters,” DVD Audio*/MP3/WMA*/MPEG-1/  
At the beginning of a scene containing  
multi-angle views.  
MPEG-2/ASF*/DivX comprises of “Groups” which  
includes “Tracks,” JPEG comprises of “Groups” which  
includes “Files,” and CD/SVCD/VCD comprises of only  
At the beginning of a scene containing  
multi-audio sounds.  
At the beginning of a scene containing  
multi-subtitles.  
Tracks.”  
• For playback of MP3/WMA*/JPEG/MPEG-1/MPEG-2/  
ASF*/DivX files in a USB mass storage class device*, see  
also page 26.  
• The following icons will be also shown on the TV to  
indicate your current operation.  
,
,
,
,
,
To insert a disc  
You can insert a disc while playing another source.  
• To deactivate the on-screen guide icons, see “ON  
SCREEN GUIDE” in “OTHERS” menu on page 36.  
Remote  
ONLY  
To select a title/group  
While playing a disc/file...  
GROUP/TITLE SKIP  
• When using an 8 cm disc, place it on the inner circle of the  
disc tray.  
To close the disc tray, press 0 again.  
• If you press DVD/CD 3, disc tray closes automatically  
and playback starts (depending on how the disc is  
programmed internally).  
(while holding...)  
• You can select a title/group directly by pressing a number  
button after pressing GROUP/TITLE (except for DVD-VR  
disc).  
To connect a USB mass storage class device  
This section applies only to UX-G60.  
• Group name appears for MP3 or WMA* playback.  
You can connect a USB mass storage class device  
(see page 5) while playing another source.  
• If you press USB MEMORY 3, the System detects the  
USB mass storage class device, the control screen appears  
on the TV screen, and playback starts.  
• To disconnect the USB mass storage class device safely,  
disconnect the device after turning the System off.  
To select a chapter/track  
• For VCD/SVCD, cancel PBC (see next page).  
While playing a disc/file...  
• First time you press 4, you  
GROUP/TITLE SKIP  
will go back to the beginning of  
the current chapter/track.  
To playback a disc/file  
To start:  
To pause:  
To stop:  
Remote  
ONLY  
To locate a particular portion  
DVD/CD  
USB  
While playing a disc/file...  
*
USB  
DVD/CD  
MEMORY  
+
SLOW  
To release, press  
DVD/CD 3 or  
USB MEMORY 3*.  
x2  
x2  
x5  
x5  
x10  
x10  
x20  
x20  
x60  
x60  
While playing a disc/file: This System can store the stop  
point, and when you start playback again by pressing  
DVD/CD 3 or USB MEMORY 3* (even while on  
standby), it starts from the position where you have  
stopped—Resume Play. (“RESUME” appears on the  
display when you stop playback.)  
• Search speed changes as illustrated above except for MP3/  
WMA*/DivX discs/files. For MP3/WMA*/DivX discs/  
files, search speed and the indications on the TV are  
different.  
• No sound comes out if searching is carried out while  
showing the moving picture.  
To stop completely while Resume is activated, press 7  
To return to normal playback, press DVD/CD 3 or USB  
MEMORY 3* (depending on the source type).  
twice. (To cancel Resume, see “RESUME” on page 36.)  
• When operating the System, the on-screen guide icon (see  
the following table) appears on the TV.  
*
For UX-G60 only  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• For DivX, each time you press the > or < button, you can  
skip to a scene for 30 seconds or 5 minutes depending on  
the DivX file.  
To move to the next or previous page of the current  
menu:  
GROUP/TITLE SKIP  
Moves to the next page.  
Moves to the previous page.  
Remote  
ONLY  
To return to the previous menu:  
To locate an item directly  
You can select a title/chapter/track directly and start  
playback.  
RETURN  
• For DVD Video, you can select a title before starting  
10  
playback, while you can select a chapter after starting  
playback  
.
Examples:  
(while holding...)  
1
4
3
2
5
8
0
To select number 5, press 5.  
To select number 10, press 10.  
To select number 15, press 10,  
1, then 5.  
To select number 30, press 10,  
3, then 0.  
6
To cancel PBC, press 7, then select a track. Playback starts  
with the selected track.  
9
7
To reactivate PBC, press 7 (twice if Resume is turned  
“ON”), then press DVD/CD 3.  
10  
10  
Playing Back a  
Remote  
ONLY  
Remote  
ONLY  
INFO  
Portable Audio Device  
To playback using the disc menu  
By using QP Link (Quick Portable Link), you can easily start  
playing back a portable audio device connected to the AUX  
jack.  
7 For DVD Video/DVD Audio*:  
1 Show the disc menu.  
TOP MENU/PG  
MENU/PL  
• Make sure to set the volume of your portable audio device  
loud enough so that the System can detect the sound signal.  
To activate QP Link  
AHB PRO  
QP LINK  
2 Select an item on the disc menu.  
QPL ON  
TV CH  
(Initial setting)  
QPL OFF  
ENTER/SET  
When QP Link is activated, connecting a portable device to  
the AUX jack and starting playback performs the following:  
• While listening to another source...  
TV CH  
Changes the source to AUX automatically. (If you change  
from AUX to another source, QP Link will be canceled.)  
• While the System is on standby...  
Turns on the System and activates the AUX source  
automatically (except when the display is turned off).  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
• With some discs, you can also select items by entering the  
number using the number buttons.  
7 For SVCD/VCD with PBC:  
While playing a disc with PBC, “PBC” appears on the  
display.  
When disc menu appears on the TV, select an item on the  
menu. Playback of the selected item starts.  
Examples:  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
1 2  
3
1
A NEW
INFO  
PRGR. B.S.P. BONUS PRGM RD  
REC  
SLEEP  
A.STBY  
Bubbles appear when  
QP Link works.  
REC  
1
3
2
5
8
0
To select number 5, press 5.  
To select number 10, press 10.  
To select number 15, press 10,  
1, then 5.  
To select number 30, press 10,  
3, then 0.  
While QP Link plays back the device...  
4
6
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
1 2  
3
1
TA NEWS  
INFO  
PRGR. B.S.P. BONUS PRGM RND  
9
7
Bubbles disappear  
REC  
SLEEP  
A.STBY  
when the sound signal  
stops or is too weak.  
10  
10  
REC  
*
For UX-G60 only  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Daily Operations—Sound & Other Adjustments  
Adjusting the Volume  
Remote control  
You can adjust the volume level from VOL MIN to level 40  
(VOL MAX).  
DIMMER  
Remote control:  
Main unit:  
SLEEP  
3D PHONIC  
A.STANDBY  
CLOCK/TIMER  
SCAN MODE  
(UX-G60)  
VOLUME  
NTSC/PAL  
(UX-G55)  
VFP  
DISPLAY  
TV VOL  
AUDIO VOL  
CANCEL  
, ,  
,
ENTER/SET  
Remote  
ONLY  
To drop the volume in a moment  
To restore the volume, press again, or  
adjust the volume level.  
FADE  
MUTING  
AHB PRO  
BASS/TREBLE  
DVD/AUX  
LEVEL  
AUDIO VOL  
+,–  
SHIFT  
INFO  
Adjusting the Sound  
FADE  
MUTING  
SOUND  
TURBO  
To reinforce the heavy sound  
This boosts the low and high frequency sound—Sound  
Turbo II.  
SOUND  
TURBO  
Main unit  
TURBO ON  
TURBOOFF  
• When Sound Turbo II is turned on, AHB Pro is  
automatically turned on, and cannot be turned off.  
(AHB PRO indicator does not light even though the  
function is turned on.)  
Remote  
ONLY  
To reinforce the bass sound  
While Sound Turbo II is off, the richness and fullness of the  
bass sound is clearly maintained regardless of how you set  
the volume—Active Hyper Bass Pro.  
3D-PHONIC  
VOLUME +,–  
SOUND  
TURBO  
AHB PRO  
QP LINK  
AHB ON  
AHB OFF  
(while holding...)  
• When Sound Turbo II is turned on, AHB Pro setting cannot  
be changed.  
The illustration above is UX-G60.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
Presetting Automatic DVD Video Sound  
To adjust the tone  
Remote  
ONLY  
You can adjust the bass and treble level from –3 to +3.  
Increase Level  
To adjust the bass  
DVD Video sound is sometimes recorded at a lower level  
than other discs and sources. You can set the increase level  
for the currently loaded DVD Video, so you do not have to  
adjust the volume when you change the source.  
• This only functions for DVD Video and DVD-VR format  
disc.  
BASS/  
TREBLE  
BASS TREBLE  
Canceled  
TV VOL  
AUDIO VOL  
DVD/AUX  
LEVEL  
To adjust the treble  
NORMAL MIDDLE  
HIGH  
BASS/  
TREBLE  
BASS TREBLE  
Canceled  
NORMAL Original recording level.  
TV VOL  
AUDIO VOL  
MIDDLE  
HIGH  
Output level is increased (less than “HIGH”).  
Output level is increased (more than  
“MIDDLE”). (initial setting)  
Creating 3-dimensional Sound Field  
—3D Phonic  
• This does not function for MPEG-1/MPEG-2/ASF*/DivX  
discs.  
Remote  
ONLY  
Adjusting the Audio Input Level  
If the sound from the component connected to the  
AUX jack is too loud or is too quiet when changing from  
another source to “AUX,” you can change the audio input  
level through the AUX jack (without changing the volume  
level).  
While playing a disc...  
Remote control:  
Main unit:  
While the “AUX” is selected as a source...  
3D PHONIC  
DVD/AUX  
LEVEL  
4
AUX LVL1 AUX LVL2  
AUX LVL3  
(while holding...)  
AUX LVL1 Select this when the sound is too loud with  
“AUX LVL2” selected. This setting is  
ACTION  
OFF  
DRAMA  
3D PHONIC  
3D PHONIC  
3D PHONIC  
3D PHONIC  
recommended for listening and recording  
when connecting an audio device other than a  
portable audio device to the AUX jack.  
THEATER  
AUX LVL2 Select this when the sound is too loud with  
ACTION  
DRAMA  
Suitable for action movies and sports  
programs.  
“AUX LVL3” selected.  
AUX LVL3 Select this when listening to a portable audio  
device or recording the sound from it (initial  
setting).  
Creates natural and warm sound. Enjoy  
movies in a relaxed mood.  
THEATER Enjoy sound effects like in a major theater.  
*
For UX-G60 only  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
Remote  
ONLY  
Changing the Display Brightness  
Changing the Picture Tone  
You can dim the display window.  
• While showing a playback picture on the TV, you can  
select a preset picture tone, or adjust it and store your own  
taste.  
To select a preset picture tone  
DIM OFF DIM ON  
DIMMER  
(Canceled)  
1
1 While playing, display VFP setting screen.  
AUTO DIM  
NORMAL  
GAMMA  
0
0
0
0
0
0
VFP  
(while holding...)  
BRIGHTNESS  
CONTRAST  
SATURATION  
TINT  
10  
DIM ON  
Dims the display.  
AUTO DIM*1 Removes the display illumination when  
starting playback a disc with a video  
source.  
• The display illuminates when playback  
stops.  
SHARPNESS  
(while holding...)  
On the TV  
2 Select a preset picture tone.  
NORMAL  
*1 “AUTO DIM” does not work for CD/MP3/WMA*2.  
CINEMA  
USER1  
Remote  
ONLY  
USER2  
INFO  
Changing the Scanning Mode  
Select the color system and the video signal mode according  
to the type of your TV. If you connect a progressive TV to  
UX-G60 through the COMPONENT jacks, you can enjoy a  
high quality picture from the built-in DVD player by  
selecting “PAL PRG” or “NTSC PRG.”  
NORMAL  
CINEMA  
Normally select this.  
Suitable for a movie source.  
UX-G60  
USER1/USER2 You can adjust parameters and can  
store the settings.  
SCAN MODE  
To remove the screen, press VFP again while holding  
SHIFT.  
PAL PAL PRG  
9
NTSC PRG  
NTSC  
To adjust the picture tone  
1 Select “USER1” or “USER2.”  
(while holding...)  
ENTER/SET  
• Follow steps 1 and 2 explained above.  
2 Select a parameter you want to adjust.  
TV CH  
ENTER/SET  
UX-G55  
NTSC/PAL  
TV CH  
PAL  
NTSC  
9
GAMMA  
Adjust if the neutral color is bright or  
dark (–3 to +3).  
(while holding...)  
BRIGHTNESS Adjust if the entire picture is bright or  
ENTER/SET  
dark (–8 to +8).  
CONTRAST  
Adjust if the far and near positions  
are unnatural (–7 to +7).  
PAL  
Select for a conventional PAL TV.  
SATURATION Adjust if the picture is whitish or  
PAL PRG*2 Select for a progressive PAL TV.  
Select to enjoy a progressive scanned  
picture with a progressive PAL TV.  
blackish (–7 to +7).  
TINT  
Adjust if the human skin color is  
unnatural (–7 to +7).  
NTSC  
Select for a conventional NTSC TV.  
SHARPNESS  
Adjust if the picture is indistinct  
(–8 to +8).  
NTSC PRG*2 Select for a progressive NTSC TV.  
Select to enjoy a progressive scanned  
picture with a progressive NTSC TV.  
*
2 For UX-G60 only  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
3 Adjust the parameter.  
Turning Off the Power Automatically  
Auto Standby  
TV CH  
ENTER/SET  
TV CH  
A.STANDBY  
On  
Canceled  
3
4 Repeat steps 2 to 3 to adjust other parameters.  
To erase the screen, press VFP again while holding SHIFT.  
(while holding...)  
Remote  
ONLY  
When Auto Standby is in use, the A.STBY indicator lights  
on the display.  
INFO  
Setting the Clock  
Without setting the built-in clock, you cannot use Daily  
Timers (see page 33) and Sleep Timer.  
• To correct a mis-entry during the process, press CANCEL  
(while holding SHIFT) or CLOCK/TIMER (while holding  
SHIFT). You can return to the previous step.  
When disc play stops, the A.STBY indicator starts flashing.  
If no operation is done for about 3 minutes while the  
indicator is flashing, the System turns off (standby)  
automatically.  
Sleep Timer  
1 Activate the clock setting mode.  
You can set the shut-off time so that you can go to bed  
without turning it off yourself.  
D V D MP3 WMA 3DPHONICL-  
CLOCK/TIMER  
B
PRO USB MIC V.MASK C.VO  
RND  
1
TA  
BONUS  
PRGM  
1 Specify the time (in minutes).  
6
SLEEP  
(while holding...)  
2
• If you have already adjusted the clock before, press the  
button repeatedly until the clock setting mode is  
selected.  
(while holding...)  
10 20 30 60 90 120 150  
Canceled  
2 Set the time.  
• Adjust the hour, then the minute.  
2 Wait until the set time disappears.  
ENTER/SET  
To check the time remaining until the shut-off time, press  
SLEEP while holding SHIFT.  
• If you press the button repeatedly, you can change  
the shut-off time.  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
1 2  
3
1
TA NEWS  
INFO  
PRGR. B.S.P. BONUS PRGM RND  
REC  
SLEEP  
A.STBY  
REC  
Now the built-in clock starts working.  
To check the current clock time during play  
DISPLAY  
Source information  
Clock  
Disc type  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unique DVD/VCD Operations  
Remote  
ONLY  
The following discs/files can be played back only with  
UX-G60:  
INFO  
Selecting the Audio Track  
For DVD Video/DivX: While playing back a chapter  
containing audio languages, you can select the language to  
listen to.  
• DVD Audio, WMA, ASF, DivX Ultra  
• Files in a USB mass storage class device  
For DVD Audio  
*:  
While playing back a track containing  
audio channels, you can select the audio channel to listen to.  
For DVD-VR and SVCD/VCD: When playing back a track,  
you can select the audio channel to play.  
• You can also select the audio track using the on-screen bar  
(see page 22).  
Remote control  
Number  
buttons  
AUDIO/MPX  
C.VOICE  
ZOOM  
ANGLE  
While playing a DVD Video...  
Ex.:  
1/3  
2/3  
3/3  
,
,
,
ENTER  
/SET  
7
ENGLISH  
FRENCH  
JAPANESE  
DVD/CD 3  
1/3  
2/3  
FRENCH  
3/3  
JAPANESE  
8
ENGLISH  
SLOW  
,
AUDIO/MPX  
PAGE  
SUBTITLE  
(UX-G60)  
SUBTITLE  
(UX-G55)  
SHIFT  
While playing a DVD Audio*/DivX...  
Ex.:  
1/3  
2/3  
3/3  
1
2
3
While playing a DVD-VR, or SVCD/VCD...  
SVCD  
AUDIO/MPX  
ST1  
R2  
ST2  
L2  
L1  
R1  
DVD-VR/VCD  
ST  
L
R
ST1/ST2/ To listen to normal stereo (2-channel)  
ST  
playback.  
L1/L2/L  
To listen to the left audio channel.  
R1/R2/R To listen to the right audio channel.  
• SVCD can have 4 audio channels. SVCD usually uses  
these 4 channels to record two 2-channel recordings (ST1/  
ST2).  
*
For UX-G60 only  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
Remote  
ONLY  
Selecting the Subtitle Language  
Selecting the View Angle  
For DVD Video/DivX: While playing back a chapter  
containing subtitles in different languages, you can select the  
subtitle language to display on the TV.  
For DVD-VR: While playing, you can turn the subtitles on  
or off.  
For SVCD: While playing, you can select the subtitles even  
if no subtitles are recorded on the disc.  
• You can also select the subtitle language using the  
on-screen bar (see page 22).  
For DVD Video only: While playing back a chapter  
containing multi-view angles, you can view the same scene  
from different angles.  
• You can also select the multi-view angles using the on-  
screen bar (see page 22).  
While playing...  
ANGLE  
8
While playing a DVD Video/DivX...  
1
(while holding...)  
1/3  
Ex.:  
1/3  
2/3  
3/3  
ENGLISH  
1/3  
SUBTITLE  
ENGLISH  
1
2
3
1/3  
2/3  
3/3  
1
2
3
2
TV CH  
Remote  
ONLY  
Selecting the Browsable Still Pictures  
TV CH  
This function is available only for UX-G60.  
For DVD Audio only: While playing back a track linked to  
browsable still pictures (B.S.P.), you can select the still  
picture (turn the page) to be shown on the TV screen.  
• If a track is linked to browsable still pictures (B.S.P.), they  
are usually shown automatically during playback.  
• You can also select the page using the on-screen bar (see  
page 22).  
Ex.:  
1/3  
2/3  
3/3  
ENGLISH  
FRENCH  
JAPANESE  
1/3  
ENGLISH  
2/3  
FRENCH  
3/3  
JAPANESE  
Each time you press  
the button (while  
holding SHIFT), the  
PAGE  
SUBTITLE  
still picture changes  
one after another (if  
available).  
(while holding...)  
While playing a DVD-VR...  
SUBTITLE  
Remote  
ONLY  
Playing Back Bonus Group  
OFF  
OFF  
ON  
ON  
This function is available only for UX-G60.  
For DVD Audio only: Some DVD Audio discs have a  
special group called “bonus group” whose contents are not  
open to the public.  
• To playback a bonus group, you have to enter the specific  
“key number” (a kind of password) for the bonus group.  
The way of getting the key number depends on the disc.  
While playing an SVCD...  
SUBTITLE  
1 Select the bonus group.  
• The bonus group is usually recorded as the last group  
(for example, if a disc contains 4 groups including a  
bonus group, “group 4” is the bonus group).  
• For how to select the group, see “To select a title/group”  
on page 10.  
Continued on the next page  
*
For UX-G60 only  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Enter the key number.  
Slow-motion playback  
• This does not function for MPEG-1/MPEG-2/ASF*1/DivX  
discs.  
1
4
7
3
6
9
2
5
8
0
ENTER/SET  
1 While playing...  
Still picture playback starts.  
3
Follow the interactive instructions shown on the  
screen.  
2 Select slow motion speed.  
Forward slow motion starts.  
+
SLOW  
To cancel the key number entry, press 7.  
1/32  
1/16  
1/8  
1/4  
1/2  
1/2  
Reverse slow motion*2 starts.  
Remote  
ONLY  
Making Dialogues Clear—Clear Voice  
1/32  
1/16  
1/8  
1/4  
When you playback a disc, you can make the singer’s voices  
or dialogues of the movie clear—Clear Voice. When Clear  
Voice is in use, the C.VOICE indicator lights on the display.  
• This function only works for center-channel encoded  
multi-channel disc.  
*2 Only available for DVD Video.  
To resume normal playback, press DVD/CD 3.  
To replay the previous scenes  
(One-Touch Replay)  
• This function is only used while playing DVD Video/  
DVD-VR.  
C.VOICE  
C.VOICE  
Off  
5
While playing back...  
(while holding...)  
The playback position moves  
back about 10 seconds before the  
current position (only within the  
same title).  
Remote  
ONLY  
Special Effect Playback  
Pause playback  
To pause:  
INFO  
To resume normal  
playback:  
Zoom  
1 While playing back...  
While playing...  
DVD/CD  
ZOOM  
ZOOM 1  
ZOOM 2  
ZOOM 3  
ZOOM 6  
ZOOM 4  
ZOOM 5  
7
ZOOM OFF  
(while holding...)  
Frame-by-frame playback  
1 While playing...  
2 Move the zoomed-in position.  
Still picture playback starts.  
TV CH  
2 Advance the still picture frame by frame.  
TV CH  
To cancel Zoom, press ZOOM (while holding SHIFT)  
repeatedly until “ZOOM OFF” appears on the TV.  
To resume normal playback, press DVD/CD 3.  
*
1 For UX-G60 only  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback Operations  
The following discs/files can be played back only with  
UX-G60:  
• DVD Audio, WMA, ASF, DivX Ultra  
• Files in a USB mass storage class device  
Programming the Playing Order  
Remote  
ONLY  
INFO  
—Program Play  
You can arrange the playing order of the chapters or tracks  
(up to 99) before you start playback.  
• Program play cannot be used for DVD-VR/JPEG/  
MPEG-1/MPEG-2/ASF*/DivX and files in a USB mass  
storage class device*.  
Remote control  
• Resume does not work for Program Play.  
Number  
buttons  
ZOOM  
1 Before starting playback, activate Program Play.  
FM/PLAY  
MODE  
PROGRAM  
Canceled  
RANDOM  
CANCEL  
MENU/PL  
TOP MENU/PG  
,
,
, ,  
*
USB  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
ENTER/SET  
ON SCREEN  
7
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
MEMORY 3  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
REC  
SLEEP  
DVD/CD 3  
A.STBY  
REC  
8
On the display  
1
4
,¢  
FM/PLAY  
MODE  
REPEAT A-B  
REPEAT  
PROGRAM  
No Group/Title  
1
Track/Chapter  
SHIFT  
2
3
4
5
6
7
8
9
10  
USE NUMERIC KEYS TO PROGRAM TRACKS.  
USE CANCEL TO DELETE THE PROGRAM.  
On the TV  
Main unit  
2 Select chapters or tracks you want for Program Play.  
• For DVD Video/DVD Audio*/MP3/WMA*:  
1 Select a title or group number.  
2 Select a chapter or track number.  
3 Repeat the above steps 1 and 2.  
• For SVCD/VCD/CD:  
DVD/CD #/  
USB  
MEMORY #/  
8
8
1 Select tracks.  
*
To enter the numbers directly:  
Examples:  
1
3
2
5
8
0
To enter number 5, press 5.  
To enter number 10, press 10.  
To enter number 15, press 10,  
1, then 5.  
To enter number 30, press 10,  
3, then 10.  
0
4
, 7,  
¢
4
6
9
7
10  
10  
The illustration above is UX-G60.  
Continued on the next page  
*
For UX-G60 only  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
3 Start playback.  
Playing at Random—Random Play  
Playback starts in the order you  
have programmed.  
DVD/CD  
You can play all chapters or tracks at random.  
• Random Play cannot be used for DVD-VR/JPEG/  
MPEG-1/MPEG-2/ASF*1/DivX, some DVDs and files in  
the USB mass storage class device*1.  
To skip a step:  
To pause:  
To stop:  
1 Before starting playback, activate Random Play.  
GROUP/TITLE SKIP  
FM/PLAY  
MODE  
PROGRAM  
RANDOM  
Canceled  
To release, press  
DVD/CD 3.  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
To check the programmed contents  
REC  
SLEEP  
A.STBY  
Before or after playback...  
REC  
TV CH  
In the reverse order.  
2 Start playback.  
Playback starts in random order.  
Random Play ends when the  
entire disc has been played.  
TV CH  
DVD/CD  
In the programmed order.  
• You can also use 4 or ¢ to check the programmed  
contents.  
To modify the program  
Before or after playback...  
To skip a chapter/ To pause:  
track:  
To stop:  
To erase the last track/file:  
CANCEL  
To release, press  
DVD/CD 3.  
0
To exit from Random Play  
Before or after playback...  
(while holding...)  
To erase the entire program: To add another track/  
file to the program:  
FM/PLAY  
MODE  
PROGRAM  
RANDOM  
Repeat step 2.  
Canceled  
2 sec.  
CANCEL  
0
(while holding...)  
To exit from Program Play  
Before or after playback...  
FM/PLAY  
MODE  
PROGRAM  
RANDOM  
Canceled  
*
1 For UX-G60 only  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*2 During Program Play and Random Play, “REP STEP”  
appears instead of these indications, and repeat modes  
change as follows for all the discs.  
Remote  
ONLY  
INFO  
Playing Repeatedly  
• You can also select the repeat mode using the on-screen bar  
(see pages 23 and 24).  
REP STEP  
REP ALL  
• ForMP3/WMA*1/JPEG/MPEG-1/MPEG-2/ASF*1/DivX,  
see page 27.  
REP OFF  
(Canceled)  
Repeat Play  
You can repeat playback.  
A-B Repeat  
You can repeat playback of a desired portion by specifying  
the beginning (point A) and the ending (point B).  
• A-B Repeat cannot be used for MP3/WMA*1/MPEG-1/  
MPEG-2/ASF*1/DivX, some DVDs and files in the USB  
mass storage class device*1.  
• For DVD Video:  
While playing...  
REPEAT A-B  
2
*
REPEAT  
REP CHAP  
REP TTL  
REP OFF  
1 While playing (without PBC for SVCD/VCD), select  
(Canceled)  
the start point (A).  
1
• For DVD Audio  
*
:
starts flashing on the  
display.  
While playing or before playback...  
REPEAT A-B  
REPEAT  
REPEAT A-B  
2
A-  
appears on the  
*
REPEAT  
REP TRK  
REP GRP  
TV if the TV is turned on.  
REP OFF  
(Canceled)  
(while holding...)  
• For CD/SVCD/VCD:  
While playing (without PBC for SVCD/VCD) or before  
playback...  
2 Select the end point (B).  
stops flashing.  
REPEAT A-B  
2
REPEAT  
*
A-B  
appears on the  
REPEAT A-B  
REPEAT  
REP ALL  
REP TRK  
TV.  
REP OFF  
• You can search for the  
end point using the ¡  
button.  
(Canceled)  
• For DVD-VR:  
While playing an original program...  
(while holding...)  
REPEAT A-B  
To cancel A-B Repeat, press REPEAT A-B again while  
holding SHIFT.  
• A-B Repeat will also be canceled when you stop play or  
skip the chapter or track.  
REPEAT  
REP CHAP  
REP PG  
REP ALL  
REP OFF  
(Canceled)  
While playing a Program List...  
Main Unit  
ONLY  
REPEAT A-B  
Prohibiting Disc Ejection—Child Lock  
You can lock the disc tray so that no one can eject the loaded  
disc.  
REPEAT  
REP CHAP  
REP PL  
REP OFF  
(Canceled)  
• This is possible only while the System is on standby.  
2
While the disc tray is closed...  
REP CHAP  
*
Repeats the current chapter.  
Repeats the current title.  
REP TTL  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
REP TRK*2 Repeats the current track.  
V.MASK C.VOICE PG  
ST MONO  
S.TURBO AHB PRO USB MIC  
PRGR. B.S.P. BONUS PRGM RND  
PL  
INFO  
1 2  
3
1
TA NEWS  
REC  
SLEEP  
A.STBY  
REP GRP  
REP PG  
REP ALL  
REP PL  
Repeats the current group.  
REC  
Repeats the current program.  
Repeats the disc or program.  
Repeats the current Program List.  
(while holding...)  
To cancel the prohibition, repeat the same procedure.  
“UNLOCKED” appears on the display.  
*
1 For UX-G60 only  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote  
ONLY  
INFO  
On-screen Disc Operations  
On-screen Bar Information  
1 Disc type  
You can check the disc information and use some functions  
through the on-screen bar.  
2 Playback information  
Indication  
Dolby D, LPCM Audio format  
3/2.1ch, 2/0.0 ch Channel number  
Meanings  
On-screen bars  
DVD Video  
TITLE  
2
1
2
3
Current title  
Dolby D  
3/2.1ch  
E
CHAP  
TIME 0:00:58  
Current chapter  
Current group  
Current track  
Time indications  
T
I
TL  
2
3
CHAP  
3
DVD-VIDEO  
TIME  
O
F
F
CHAP.  
1
/3/1
1
/
3
1
GROUP  
1
TRACK 14  
4
DVD Audio*1  
TOTAL1:25:58  
3 Operation modes  
Indication  
1
2
3
Meanings  
LPCM  
GROUP 14 TRACK 23 TIME 0:00:58  
DVD-AUDIO  
2/0.0ch  
Playback  
TIME  
OFF  
1/  
3
1/  
PAGE  
3
TRACK  
/
/
Forward/Reverse search  
4
Forward/Reverse slow-motion  
SVCD  
Pause  
Stop  
1
2
3
3
4 Function icons (on the pull-down menu)  
TRACK  
3
TIME 0:00:58  
SVCD  
Indication  
TIME  
Meanings  
Select to change the time  
indication.  
TIME  
O
F
F
S
T
1
-/  
/3  
1
4
4
4
VCD  
1
OFF  
Select to repeat playback.  
Select for time search.  
Select for chapter search.  
Select for track search.  
2
CHAP.  
TRACK  
3
TIME 0:00:58  
VCD  
TIME  
O
F
F
S
T
TRACK  
Select to change the audio  
language or channel (see also  
page 16).  
1/3  
CD  
Select to change subtitle language  
(see also page 17).  
1/3  
1/3  
1
2
3
TIME 0:00:58  
TRACK  
3
CD  
Select to change the view angle  
(see also page 17).  
TIME  
OFF  
4
Select to change the page (see also  
page 17).  
PAGE 1 / 5  
MP3/WMA*1/MPEG-1/MPEG-2/ASF*1/DivX  
1
2
3
3
TIME 00:00:58  
FILE  
USB*1  
1
2
TIME 00:00:58  
USB  
*
1 For UX-G60 only  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To operate using the On-screen Bar  
Ex.: Selecting a subtitle (French) for DVD Video  
For detailed operations of the following functions, see  
also “To operate using the On-screen Bar” on the left.  
While a disc is selected as the source...  
To change the time information  
You can change the time information in the on-screen bar  
and the display window on the main unit.  
1 Display the entire on-screen bar.  
ON SCREEN  
Dolby D  
3/2.1ch  
TITLE  
2
CHAP  
3
TIME 0:00:58  
DVD-VIDEO  
2
1 While playing, display the on-screen bar with the  
*
Dolby D  
3/2.1ch  
T
I
TL  
E
2
CHAP  
3
TIME 0:00:58  
DVD-VIDEO  
pull-down menu.  
TIME  
OFF  
CHAP.  
1/3 1/3 1/1  
Dolby D  
3/2.1ch  
3
TIME 0:00:58  
T
I
TL  
E
2
CHAP  
DVD-VIDEO  
disappears  
TIME  
O
F
F
CHAP.  
1
/3
1
/3
1
/1
*2 This does not appear for MP3/WMA*1/JPEG/MPEG-1/  
MPEG-2/ASF*1/DivX discs and files in a USB mass  
storage class device*1.  
TIME  
2 Make sure  
is selected (highlighted).  
3 Change the time indication.  
ENTER/SET  
REM 0:11:23  
TOTAL 1:01:58  
TIME 0:00:58  
2 Select (highlight) the item you want.  
T. REM 0:35:24  
TIME  
REM  
Elapsed playing time of the current  
chapter/track (except for DVD-VR).  
Dolby D  
T
I
TL  
E
2
CHAP  
3
TIME 0:00:58  
DVD-VIDEO  
3/2.1ch  
Remaining time of the current chapter/  
track (except for DVD-VR).  
TIME  
O
F
F
CHAP.  
1
/3/3/1
1
1
3 Display the pop-up window.  
TOTAL  
T. REM  
Elapsed disc time.  
ENTER/SET  
Remaining disc time.  
TITLE  
2
C
H
AP
/3
ENGLISH  
3
T
O
T
A
L
1
:0  
1
:5  
8
1
/3
1
1
/1
To remove the on-screen bar  
ON SCREEN  
4 Select the desired option in the pop-up window.  
TV CH  
T
T
I
TL  
E
2
CHAP  
TOTAL 1:01:58  
3
Repeat Play  
• See also page 21.  
1
/3/3/1
2
1
TV CH  
FRENCH  
1 While playing a disc (without PBC for SVCD/VCD),  
display the entire on-screen bar.  
5 Finish the setting.  
• Repeat Play can be selected before starting playback,  
except for DVD Video/DVD-VR.  
Pop-up window disappears.  
ENTER/SET  
2 Select  
.
OFF  
3 Display the pop-up window.  
Dolby D  
3/2.1ch  
CHAP  
TOTAL 1:01:58  
3
T
I
TL  
E
2
DVD-VIDEO  
To remove the on-screen bar  
TIME  
O
F
F
CHAP.  
1
/3/3/1
1
1
ON SCREEN  
OFF  
Continued on the next page  
*
1 For UX-G60 only  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Select the repeat mode you want.  
Time Search  
You can move to a particular point by specifying the elapsed  
playing time from the beginning.  
A-B  
Repeats a desired portion (see below).  
TITLE*1  
GROUP  
ALL  
Repeats the current title.  
Repeats the current group.  
1 While playing (without PBC for SVCD/VCD), display  
the entire on-screen bar.  
Repeats the disc (except for DVD) or  
program.  
• Time Search can be used before starting playback,  
except for DVD Video/DVD-VR.  
2
CHAPTER  
TRACK*2  
*
Repeats the current chapter.  
Repeats the current track.  
Cancels Repeat Play.  
2 Select  
3 Display the pop-up window.  
.
OFF  
Dolby D  
*1 While playing a DVD-VR disc, “PG” appears, and  
while playing a Play list, “PL” appears.  
*2 During Program Play and Random Play, “STEP”  
appears.  
DVD-VIDEO  
T
I
TL  
E
2
CHAP  
3
TIME 0:00:58  
3/2.1ch  
TIME  
O
F
F
CHAP.  
TIME _ : _ _ : _ _  
1
/3/3/1
1
1
4 Enter the time.  
5 Finish the setting.  
You can specify the time in hours/minutes/seconds.  
ENTER/SET  
Examples:  
1
4
7
3
6
9
2
5
8
0
To move to a point of 1  
(hours): 02 (minutes): 00  
(seconds), press 1, 0, 2, 0, then  
0.  
A-B Repeat  
• See also page 21.  
To move to a point of 54  
(minutes): 00 (seconds), press  
0, 5, 4, 0, then 0.  
1 While playing, display the entire on-screen bar.  
2 Select  
3 Display the pop-up window.  
.
OFF  
• It is always required to enter the hour digit (even “0”  
hour), but it is not required to enter trailing zeros (the  
last two digits in the examples above).  
Dolby D  
3/2.1ch  
T
I
TL  
E
2
CHAP  
TOTAL 1:01:58  
3
DVD-VIDEO  
TIME  
O
F
F
CHAP.  
1
/3/3/1
1
1
To correct a mis-entry, press cursor to erase the last  
<
entry.  
OFF  
5 Finish the setting.  
4 Select “A-B.”  
The System starts playing the disc  
from the selected playing time.  
ENTER/SET  
TV CH  
Dolby D  
3/2.1ch  
DVD-VIDEO  
TIME  
O
F
F
CHAP.  
TV CH  
A–B  
5 Select the start point (A).  
Chapter/Track Search  
You can search for the chapter (DVD Video/DVD-VR) or  
track (DVD Audio*3) number to play.  
ENTER/SET  
Dolby D  
3/2.1ch  
C
T
I
TL  
E
2
H  
DVD-VIDEO  
TIME  
A-  
CHAP.  
1
/3
1 While playing, display the entire on-screen bar.  
CHAP.  
TRACK  
2 Select  
or  
.
6 Select the end point (B).  
3 Display the pop-up window.  
A-B Repeat starts. The selected  
portion plays repeatedly.  
Dolby D  
3/2.1ch  
ENTER/SET  
T
I
TL  
E
2
CHAP  
TOTAL 1:01:58  
3
DVD-VIDEO  
TIME  
OFF  
CHAP.  
CHAPTER  
1
/3/3/1
1
1
• Before pressing ENTER/SET, you  
can search for the end point using  
the ¡ button.  
_
To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF”  
in step 4.  
*
3 For UX-G60 only  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Enter the desired chapter/track number.  
Control screen for DVD-R/-RW in DVD-VR format  
The control screen is superimposed on the TV screen when  
you call up Program List (PG) or Play List (PL).  
Examples:  
To select chapter/track 5, press  
5.  
To select chapter/track 10,  
press 1, then 0.  
To select chapter/track 15,  
press 1, then 5.  
1
4
7
3
6
9
2
5
8
0
To select playback type  
To select the Program  
List:  
To select the Play List:  
MENU/PL  
TOP MENU/PG  
To select chapter/track 30,  
press 3, then 0.  
To correct a mis-entry, press the number buttons until  
the desired number shown in the pop-up window.  
To remove the list, press the same button again.  
Ex.: When Program List is selected.  
5 Finish the setting.  
The System starts playing the  
searched chapter or track.  
ENTER/SET  
ORIGINAL PROGRAM  
No Date  
Ch  
L
Time  
Title  
La fleur  
The last struggle  
free flyer  
BOOM!  
Mr. Lawrence  
Satisfy U  
1 03/12/06  
2 09/12/06  
3 18/12/06  
4 20/12/06  
5 25/12/06  
6 28/12/06  
12:15  
23:05  
08:17  
07:47  
19:38  
14:20  
L
L
L
L
L
Browsable Still Pictures  
This function is available only for UX-G60.  
For DVD Audio only: While playing back a track linked to  
browsable still pictures (B.S.P.), you can select the still  
picture (turn the page) to be shown on the TV.  
• If a track is linked to browsable still pictures (B.S.P.), they  
are usually shown automatically during playback.  
1 2  
3
4
5
6
Ex.: When Play List is selected.  
PLAY LIST  
1 While playing a DVD Audio, display the entire  
No Date  
Chap Length  
Title  
Nebula G.  
CDJ  
Secret Garden  
S. Walker  
1 03/12/06 002 0:23:24  
2 15/12/06 004 1:04:39  
3 24/12/06 013 0:41:26  
4 27/12/06 017 0:09:08  
on-screen bar.  
2 Select  
.
PAGE 1 / 5  
3 Display the pop-up window.  
LPCM  
GROUP 14 TRACK 23 TIME 0:00:58  
DVD-AUDIO  
TIME  
2/0.0ch  
OFF  
1/3  
1/5  
TRACK  
PAGE  
1 2  
7
8
6
1
1 Listed number  
2 Recording date  
4 Select a still picture you want.  
TV CH  
3 Recording channels  
4 Recording time  
5 Title  
6 Highlight bar (current selection)  
7 Chapters included  
P 14 TRACK 23 TIME 0:00:58  
1/3  
3/5  
PAGE  
TV CH  
3
8 Playback time  
5 Finish the setting.  
ENTER/SET  
To select an item in the list and start playback  
TV CH  
ENTER/SET  
TV CH  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio/Video File Operations  
Ex.: When the MP3 disc is loaded.  
The following discs/files can be played back only with  
UX-G60:  
6
7
8
• DVD Audio, WMA, ASF, DivX Ultra  
• Files in a USB mass storage class device  
REPEAT TRACK TIME : 00:00:14  
1
2
3
Group : 2 / 3  
Track : 6 / 14 (Total 41)  
9
Spring  
Summer  
Fall  
Cloudy.mp3  
Fair.mp3  
Fog.mp3  
Hail.mp3  
Indian summer.mp3  
Rain.mp3  
Shower.mp3  
Snow.mp3  
Thunder.mp3  
Typhoon.mp3  
Wind.mp3  
Remote control  
Winter  
Track Information  
0
-
Title  
Rain  
Artist  
ZOOM  
4
5
Album  
Winter sky.mp3  
ENTER/SET  
,
,
,
*
USB MEMORY 3  
1 Current group number/total group number  
2 Current group  
3 Group list  
4 Track information (ID3 Tag Version 1.0: only for  
MP3 and WMA*)  
5 Current track  
6 Repeat Play setting  
7 Elapsed playing time of the current track  
(except for JPEG)  
DVD/CD 3  
7
8
GROUP/TITLE  
GROUP/TITLE  
SKIP  
REPEAT A-B  
REPEAT  
4
,¢  
SHIFT  
8 Operation mode icon  
9 Current track number/total number of tracks in the  
current group (total number of tracks on the loaded  
disc)  
Remote  
ONLY  
INFO  
0 Highlight bar  
Operations on  
Screen  
the Control  
- Track list  
• If files of different types (MP3, WMA*, JPEG,  
MPEG-1, MPEG-2, ASF* and DivX) are recorded on  
a disc or device, select the file type to play (see  
page 35).  
You can search for and play the desired items through the  
control screen for MP3/WMA*/JPEG/MPEG-1/MPEG-2/  
ASF*/DivX files.  
To move the highlight bar between group list and track  
list  
*
Control screen for MP3/WMA /JPEG/MPEG-1/  
MPEG-2/ASF /DivX files  
*
Moves the bar to the track  
list.  
The control screen automatically appears on the TV screen  
when you load a disc or connect and select a USB mass  
storage class device* in which MP3, WMA*, JPEG,  
MPEG-1, MPEG-2, ASF*, or DivX is recorded.  
Moves the bar to the group  
list.  
To select an item in the list  
Move the highlight bar to the  
TV CH  
desired item.  
• If you move the highlight bar  
while playing back an MP3,  
TV CH  
WMA* file or DVD-VR (PG/PL)  
disc, the selected track starts  
playback automatically.  
*
For UX-G60 only  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To start playback  
For JPEG:  
To repeat MP3 or WMA*  
1 playback  
While playing or before playback...  
REPEAT A-B  
The selected track (still picture)  
is displayed until you change it.  
ENTER/SET  
2
REPEAT  
*
REP TRK  
REP GRP  
REP ALL  
REP OFF  
(Canceled)  
Press one of the buttons  
depending on the current source.  
DVD/CD  
DVD/CD  
USB  
To repeat slide-show for JPEG  
While playing or before playback...  
REPEAT A-B  
1
*
USB  
MEMORY  
Slide-show playback starts.  
Each track (still picture) is  
shown on the screen for about 3  
seconds, then changes one after  
another.  
REPEAT  
REP GRP  
REP ALL  
REP OFF  
(Canceled)  
To repeat MPEG-1/MPEG-2/ASF*1  
While playing or before playback...  
REPEAT A-B  
/
DivX playback  
For the other files:  
Playback starts with the selected  
track.  
• Pressing DVD/CD 3 or  
USB MEMORY 3*1 also  
starts playback.  
ENTER/SET  
2
REPEAT  
*
REP TRK  
REP GRP  
REP ALL  
REP OFF  
(Canceled)  
• Once you start viewing a JPEG/MPEG-1/MPEG-2/  
ASF*1/DivX track, the control screen disappears.  
• To cancel slide-show and display the current still picture,  
press 8.  
REP TRK*2 Repeats the current track.  
REP GRP Repeats the current group.  
REP ALL Repeats the disc.  
*2 During Program Play and Random Play, “REP STEP”  
appears instead of this indication.  
To select a group:  
GROUP/TITLE SKIP  
To zoom in the JPEG files  
• You cannot zoom in the still picture during slide-show.  
1 While playing back a still picture...  
• During slide-show, press 8 to display the still picture,  
then...  
(while holding...)  
To skip a track:  
To stop playback:  
ZOOM  
ZOOM 1  
ZOOM 2  
GROUP/TITLE SKIP  
7
ZOOM OFF  
(while holding...)  
• You can select a group directly by pressing a number  
button after pressing GROUP/TITLE (except for DVD-VR  
disc).  
2 Move the zoomed-in position.  
TV CH  
TV CH  
To cancel Zoom, press ZOOM (while holding SHIFT)  
repeatedly until “ZOOM OFF” appears on the TV.  
*
1 For UX-G60 only  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Tape Operations  
IMPORTANT  
It may be unlawful to record or playback copyrighted  
Remote control  
material without the consent of the copyright owner.  
INFO  
Recording on a Tape  
You can use type I tapes for recording.  
• To play a tape, see page 9.  
1 Insert a recordable cassette.  
Close  
Push  
Insert  
USB MEMORY  
(UX-G60)  
3
FM/AM (UX-G55)  
TAPE  
FM/AM/AUX  
(UX-G60)  
AUX (UX-G55)  
DVD/CD  
3
7
With the tape side facing outside  
The illustration above is UX-G60.  
2 Select and start playing the source—“FM,” “AM,”  
“DVD/CD,” “USB MEM*,” or “AUX.”  
• When recording from a disc or USB source, you can  
also use “Synchronized Recording” (see page 29).  
3 Start recording.  
REC  
Main unit  
On the main unit  
PUSH OPEN 0  
To stop recording:  
FM/AM/AUX  
(UX-G60)  
AUX (UX-G55)  
DVD/CD #/  
8
TAPE  
REC  
USB  
MEMORY #/  
8
(UX-G60)  
FM/AM (UX-G55)  
7
The illustration above is UX-G60.  
*
For UX-G60 only  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To record only your favorite track  
You can specify tracks to be recorded on the tape while  
listening from a disc (except for DVD Video/DVD-VR) or  
USB mass storage class device*1.  
INFO  
Synchronized Recording  
You can start and stop both playback and tape recording at  
the same time.  
1 Start playing a disc/file.  
To record the entire tracks  
1
*
USB  
1 Load a disc or connect a USB mass storage class  
device*1 and insert a recordable cassette.  
• Press DVD/CD 3 or USB MEMORY 3*1 to select the  
current playing source, then 7.  
DVD/CD  
MEMORY  
2 While a track you want to record on the tape is  
2 Start recording.  
playing...  
The System automatically  
creates 4-second blanks between  
the tunes recorded on the tapes.  
Playback returns to the  
beginning of that track and the  
track is recorded on the tape.  
After recording the track,  
REC  
REC  
playback and recording  
automatically stop.  
On the main unit  
On the main unit  
• When either playback*2 or recording ends, both playback  
and recording stop at the same time.  
3 Repeat steps 1 and 2 to record other tracks you want.  
*2 For DVD Video: When a title is finished playing.  
• You can change the disc if necessary.  
• When the tape reaches its end, both playback and recording  
also stop at the same time.  
To protect your recording  
Cassettes have two small tabs on the back to protect  
from unexpected erasure or re-recording.  
To protect your recording, remove these tabs.  
To record a “Live” disc  
It will not be desirable to put 4-second blank portions  
between the tunes recorded on the tape.  
To record the entire tracks without any interruption  
recorded, pause playback (press DVD/CD 3 or USB  
MEMORY 3*1, then 8) before pressing REC.  
To record Program Play  
1 Select Program Play (and make a program), but do not  
start playback.  
To re-record on a protected tape, cover the holes with  
adhesive tape.  
2 Press REC to start recording.  
• When disc play stops, recording stops automatically.  
*
1 For UX-G60 only  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying Karaoke  
NOTE  
Remote control  
This function is not available for UX-G55.  
IMPORTANT  
Always set MIC VOLUME to MIN when connecting or  
disconnecting the microphone.  
DO NOT keep the microphone connected  
while they are not in use.  
KEY KEY  
,
ECHO  
INFO  
Singing Along (Karaoke)  
RESERVE  
KARAOKE  
USB MEMORY  
3
To sing along using the Karaoke discs  
You can enjoy Karaoke using the Karaoke disc (except  
Karaoke CD).  
• By pressing REC, you can record your singing-along (for  
SVCD/VCD without PBC).  
DVD/CD  
3
7
FM/AM  
/AUX  
TAPE  
AUDIO/MPX  
1 Turn MIC VOLUME to MIN.  
SHIFT  
VOLUME  
MIN  
MAX  
2 Connect the microphone (not supplied) to the MIC  
jack.  
MIC  
VOLUME  
Main unit  
MIN  
MAX  
3 Insert and start playing a Karaoke disc.  
4 Select an audio track.  
AUDIO/MPX  
MIC jack  
MIC VOLUME  
• For details, see “Selecting the Audio Track” on page 16.  
5 Sing into the microphone.  
DVD/CD #/  
USB  
MEMORY #/  
8
8
FM/AM/AUX  
TAPE  
REC  
6 Adjust the MIC VOLUME and VOLUME.  
VOLUME  
VOLUME  
VOLUME  
7
MIN  
MAX  
The illustration above is UX-G60.  
Karaoke function is not available in the Australian model.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Activate Vocal Masking.  
To adjust the Key (disc/file playback only)  
ON SCREEN  
KARAOKE  
1 Activate Key Control.  
KEYCON  
V-CANCEL  
OFF  
ON SCREEN  
KEYCON V-CANCEL  
(Canceled)  
KARAOKE  
OFF  
(while holding...)  
(Canceled)  
5 Sing into the microphone.  
(while holding...)  
6 Adjust the MIC VOLUME and VOLUME.  
VOLUME  
2 Adjust the Key  
VOLUME  
KEY  
KEY  
To raise the  
key.  
MIN  
MAX  
To lower the  
key.  
• You can apply echo to your voice.  
(while holding...)  
To deactivate Vocal Masking, select “OFF” in step 4.  
• Key Control cannot be activated for DVD Audio/  
DVD-VR/MPEG-1/MPEG-2/ASF/DivX.  
Microphone Mixing  
You can enjoy microphone mixing while playing any source.  
• By pressing REC, you can record your singing-along  
(except when the playing source is “TAPE”).  
To deactivate Key Control, press KARAOKE (while  
holding SHIFT) to select “OFF.”  
To apply echo to your voice  
MENU/PL  
ECHO ON  
1 Turn MIC VOLUME to MIN.  
ECHO  
VOLUME  
ECHO OFF  
(Canceled)  
(while holding...)  
MIN  
MAX  
To sing along using the stereo discs/audio files  
—Vocal Masking  
You can enjoy Karaoke while playing a stereo disc or an  
audio file.  
2 Connect the microphone (not supplied) to the MIC  
jack.  
3 Start playing the source—“FM,” “AM,” “DVD/CD,”  
Vocal Masking reduces the lead vocal of any disc except  
DVD Audio and DVD-VR.  
“USB MEM,” “TAPE,” or “AUX.”  
1 Turn MIC VOLUME to MIN.  
4 Sing into the microphone.  
VOLUME  
5 Adjust the MIC VOLUME and VOLUME.  
VOLUME  
VOLUME  
MIN  
MAX  
2 Connect the microphone (not supplied) to the MIC  
MIN  
MAX  
jack.  
3 Insert and start playing a stereo disc or start playing  
• You can apply echo to your voice. While playing a disc,  
you can also adjust Key Control and apply echo.  
• When selecting “TAPE” as the source, microphone  
mixing is available only during tape playback.  
an audio file.  
DVD/CD  
USB  
USB  
DVD/CD  
MEMORY  
To use the microphone only, select “AUX” in step 3, but do  
not start playback.  
Karaoke function is not available in the Australian model.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Start playback.  
Remote  
ONLY  
Reserving Karaoke Songs  
—Karaoke Program Play  
DVD/CD  
Playback starts in the order  
you have programmed.  
You can determine the playback order of the titles or tracks  
on the disc player. You can program up to 12 steps.  
1 Change the source to “DVD/CD.”  
To check the programmed contents  
During Karaoke Program Play...  
DVD/CD  
The Karaoke reserve screen appears.  
To modify the program  
While the Karaoke reserve screen is shown on the TV...  
2 Activate Karaoke Program Play.  
To remove the unwanted track:  
SET UP  
RESERVE  
TV CH  
CANCEL  
0
TV CH  
(while holding...)  
No Gr/Tt Tr/Chap  
1
2
3
4
5
(while holding...)  
To add another track to the program:  
Repeat step 3.  
On the TV screen  
To erase the entire program:  
• PRGM indicator flashes during this mode.  
2 sec.  
3 Select songs you want for Karaoke Program Play.  
CANCEL  
Press the number buttons to select a song in the following  
0
order.  
1 Select a title/group.  
2 Select a chapter/track.  
Examples:  
To exit from Karaoke Program Play  
To select preset number 5,  
press 5.  
1
3
2
5
8
0
Before or after playback...  
4
6
To select preset number 10,  
press 10.  
To select preset number 15,  
press 10, 1, then 5.  
To select preset number 30,  
press 10, 3, then 0.  
SET UP  
9
7
RESERVE  
10  
10  
(while holding...)  
During playback...  
SET UP  
RESERVE  
(while holding...)  
Karaoke function is not available in the Australian model.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Operations  
1 Select one of the timer setting modes you want to set—  
DAILY 1 ON time, DAILY 2 ON time, DAILY 3 ON  
time, or REC TMR(Recording Timer) ON time.  
Remote control  
CLOCK/TIMER  
6
AUDIO  
CLOCK/TIMER  
(while holding...)  
CANCEL  
DAILY Timer 2  
DAILY Timer 3  
DAILY Timer 1  
ENTER/SET  
ON (Time) DAILY 3 ON (Time)  
DAILY 1 ON (Time)  
DAILY 2  
,
ON (Time) REC TMR  
Recording Timer  
Canceled  
Clock setting  
(see page 15)  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
REC  
SLEEP  
A.STBY  
REC  
Ex. When Daily Timer 1 setting mode is selected  
SHIFT  
• When the clock has not been set, pressing CLOCK/  
TIMER (while holding SHIFT) makes the System enter  
the clock setting mode.  
2 Make the timer setting as you want.  
Repeat the procedure for the following settings until  
finished—  
Remote  
ONLY  
ENTER/SET  
INFO  
Setting the Timer  
Using Daily Timer, you can wake up with your favorite  
music. On the other hand, with Recording Timer, you can  
make a tape of a radio broadcast automatically.  
You can store three Daily Timer settings and one Recording  
Timer setting; however, you can activate only one of the  
timers at the same time.  
1
2
3
Set the hour then the minute for on-time.  
Set the hour then the minute for off-time.  
Select the playback source—“TUNER FM,”  
“TUNER AM,” “TAPE,” “DISC,”  
“USB MEM*,” or “AUX.”  
• To exit from the timer setting, press CLOCK/TIMER  
(while holding SHIFT) as required.  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
• To correct a mis-entry during process, press CANCEL  
(while holding SHIFT). You can go back to the previous  
step.  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
1 2  
3
1
TA NEWS  
INFO  
PRGR. B.S.P. BONUS PRGM RND  
REC  
SLEEP  
A.STBY  
REC  
Daily Timer initial settings when shipped from the  
factory  
4
For “TUNER FM” and “TUNER AM”: Select a  
preset channel.  
For “DISC”: Select the title/group number, then  
the chapter/track number.  
• DAILY 1: ON Time (6:00)/OFF Time (8:00)/  
Source (TUNER FM 1)/Volume level (– –)  
• DAILY 2: ON Time (7:00)/OFF Time (9:00)/  
Source (TUNER FM 1)/Volume level (– –)  
• DAILY 3: ON Time (10:00)/OFF Time (12:00)/  
Source (TUNER FM 1)/Volume level (– –)  
For “USB MEM  
*”: Select the group number, then  
the track/file number.  
Continued on the next page  
*
For UX-G60 only  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Select the volume level.  
You can adjust the volume level (“1” to  
“40” and “VOL – –”).  
If you select “VOL – –,” the volume is set to the last  
level when the unit has been turned off.  
To turn on or off the Timer  
Since Daily Timer is activated at the same time everyday,  
you may need to cancel it on some particular days.  
To cancel the Timer  
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)  
Once settings are completed, the Timer setting  
information appears in sequence.  
• This function is not available for VCD with PBC  
activated.  
you want to cancel.  
CLOCK/TIMER  
For Recording Timer:  
6
1
2
3
Set the hour then the minute for on-time.  
Set the hour then the minute for off-time.  
Select the playback source—“TUNER FM,”  
“TUNER AM,” or “AUX.”  
For “TUNER FM” and “TUNER AM”: Select a  
preset channel.  
(while holding...)  
DAILY Timer 1  
4
DAILY Timer 2  
DAILY Timer 3  
ON (Time)  
ON (Time)  
DAILY 1  
ON (Time) DAILY 2  
DAILY 3  
Once settings are completed, the Timer setting  
information appears in sequence. The volume is set to the  
last level when the unit has been turned off.  
Clock setting  
ON (Time) REC TMR  
Recording Timer  
Canceled  
(see page 15)  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
3 Turn off the unit (on standby) if you have set the  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
REC  
Ex. To cancel Daily  
Timer 1  
on-time.  
SLEEP  
A.STBY  
REC  
2 Turn off the selected Timer.  
CANCEL  
0
How Daily Timer works  
Once the Daily Timer has been set, the timer indicator  
(
) and timer number indicator (1/2/3) are lit on the  
(while holding...)  
display. Daily Timer is activated at the same time  
everyday until the timer is turned off manually (see the  
next column) or another timer is activated.  
To turn on the Timer  
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)  
When the on-time comes  
you want to activate.  
The System turns on, tunes in to the specified station or  
starts playing the loaded disc with the specified chapter or  
track, and sets the volume level gradually to the preset  
level after about 30 seconds.  
CLOCK/TIMER  
6
• While Daily Timer is working, the timer indicator (  
)
and timer number indicator (1/2/3) flash on the display.  
When the off-time comes  
(while holding...)  
The System stops playback, and turns off (on standby)  
DAILY Timer 2  
DAILY Timer 3  
DAILY Timer 1  
automatically.  
• The timer setting remains in memory until you change  
it.  
DAILY 1 ON (Time)  
ON (Time) DAILY 3 ON (Time)  
DAILY 2  
ON (Time)  
REC TMR  
Clock setting  
Canceled  
Recording Timer  
How Recording Timer works  
When Recording Timer has been set, Timer (  
(see page 15)  
)
2 Activate the selected Timer.  
indicator and the REC indicator are lit on the display.  
Recording Timer works only once.  
When the on-time comes  
QPLink S V C D V D MP3 WMA 3DPHONICL-BANDIII AM FM  
ST MONO  
S.TURBO AHB PRO USB MIC V.MASK C.VOICE PG PL  
INFO  
1 2  
3
1
TA NEWS  
PRGR. B.S.P. BONUS PRGM RND  
ENTER/SET  
REC  
SLEEP  
A.STBY  
The System turns on, tunes in to the specified station or  
changes the source to “AUX”, and starts recording.  
When the off-time comes  
REC  
Ex. When Daily Timer 1 (DAILY 1) is  
activated  
The System stops recording, and turns off (on standby).  
• The timer setting remains in memory until you change  
it.  
3 Wait until the indication disappears.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFO  
Setup Menu Operations  
Remote  
ONLY  
Initial settings  
Remote Control  
The Setup Menu cannot be activated during playback.  
1 Press SET UP.  
LANGUAGE  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ENGLISH  
ON SCREEN LANGUAGE  
,
,
,
ENTER/SET  
SET UP  
2 Press (or )to select the menu.  
3 Press  
(or ) to move to select the item.  
4 Press ENTER/SET.  
5 Press  
(or ) to select the options, then press  
ENTER/SET.  
• For settings of the LANGUAGE menu, see also  
“Language Code List” on page 42.  
To remove a preference display  
Press SET UP.  
LANGUAGE menu  
Item  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
Contents  
You can select the initial menu language of the DVD Video.  
You can select the initial audio language of the DVD Video.  
You can select the initial subtitle language of the DVD Video.  
You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.  
ON SCREEN LANGUAGE  
PICTURE menu  
Item  
Contents  
MONITOR TYPE  
You can select the monitor type to match your TV when you playback DVD Video discs recorded for  
wide-screen televisions.  
16:9  
4:3 LB  
16:9/16:9 MULTI (Wide television screen): For a wide-screen (16:9) TV.  
4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a  
wide-screen picture to fit the width of the TV screen keeping the aspect ratio.  
4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed  
in to fill the screen vertically and the left and right sides of the picture are cut off.  
• For multi-color system TVs, select the [MULTI] option.  
4:3 PS  
PICTURE SOURCE  
You can obtain optimal picture quality by selecting the source type of the disc contents.  
AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of  
the current disc according to the disc information.  
FILM: For a film source disc.  
VIDEO: For a video source disc.  
SCREEN SAVER  
FILE TYPE  
You can set the screen saver function to ON or OFF. If no operation is done for about 5 minutes, the  
display dims.  
You can select the file type to play.  
AUDIO: To play MP3 and WMA (for UX-G60 only) files.  
STILL PICTURE: To play JPEG files.  
VIDEO: To play MPEG-1, MPEG-2, ASF (for UX-G60 only) and DivX files.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO menu  
Item  
Contents  
DIGITAL AUDIO OUTPUT  
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the rear.  
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.  
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-  
in Dolby Digital decoder.  
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.  
DOWN MIX  
This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM  
ONLY.”  
DOLBY SURROUND: Select this when connecting to a surround decoder.  
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.  
D. RANGE COMPRESSION  
Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.  
AUTO: You can enjoy powerful playback sound with full dynamic range.  
ON: Select this when you want to fully apply the compression effect to make the sound at lower  
volume clear (useful at midnight).  
OTHERS menu  
Item  
Contents  
RESUME  
You can select Resume.  
ON: The System resumes playback from the position where playback has been stopped if the disc is  
still in the disc tray.  
OFF: Resume is deactivated.  
ON SCREEN GUIDE  
DivX REGISTRATION  
Activate or deactivate the on-screen guide.  
The System has its own Registration Code.  
If necessary, you can confirm it.  
Once you have played back a disc in which the Registration Code is recorded, the System’s  
Registration Code is overwritten for copyright protection.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
– Some MP3/WMA files cannot be played back and will  
be skipped. This results from their recording processes  
and conditions.  
– This System can play only a disc of ISO 9660 Level 1 or  
Level 2.  
– This System can playback MP3/WMA files with the  
extension code <.mp3> or <.wma> (regardless of the  
letter case—upper/lower).  
– It is recommended that you make each MP3/WMA file at  
a sampling rate of 44.1 kHz and at a bit rate of 128 kbps.  
This System cannot playback files made at a bit rate of  
less than 64 kbps.  
Learning More about This System  
Connections (see pages 3 to 5)  
• Make sure the antenna conductors do not touch any other  
terminals, connecting cords or the power cord. Also, keep  
the antennas away from metallic parts of the System,  
connecting cords and the AC power cord. This could cause  
poor reception.  
• Use only speakers with the same speaker impedance as  
indicated by the speaker terminals on the rear of the System.  
• The speakers are magnetically shielded to avoid color  
distortions on TVs. However, if not installed properly, it  
may cause color distortions. So, pay attention to the  
following when installing the speakers.  
– When placing the speakers near a TV set, turn off the  
TV’s main power switch or unplug it before installing the  
speakers.  
Then wait at least 30 minutes before turning on the TV’s  
main power switch again.  
– Some TVs may still be affected even though you have  
followed the above instructions. If this happens, move  
the speakers away from the TV.  
• For JPEG files playback...  
– It is recommended that you record a file at 640 x 480  
resolution. (If a file has been recorded at a resolution of  
more than 640 x 480, it will take a long time to be  
shown.)  
– This System can play only baseline JPEG files*.  
Progressive JPEG files* or lossless JPEG files* cannot  
be played.  
* Baseline JPEG format: Used for digital cameras,  
web, etc.  
Progressive JPEG format:Used for web.  
Lossless JPEG format: An old type and rarely used  
now.  
Daily Operations—Playback (see pages 7 to 11)  
Listening to the Radio:  
• If you store a new station into an occupied preset number,  
the previously stored station in that number will be erased.  
• When you unplug the AC power cord or if a power failure  
occurs, the preset stations will be erased in a few days. If  
this happens, preset the stations again.  
– This System can playback JPEG files with the extension  
code <.jpg> or <.jpeg> (regardless of the letter case—  
upper/lower).  
– This System may not playback JPEG files properly if  
they are recorded from a device other than a digital  
camera.  
Playing Back a Disc/File:  
– During slide-show playback, zoom cannot be operated.  
• For MPEG-1/MPEG-2 playback...  
– The stream format should conform to MPEG system/  
program stream.  
• When you change the source to DVD/CD or USB  
MEMORY (for UX-G60 only), it may take a while to  
activate the source.  
• On some DVD, SVCD, or VCD discs, the actual operations  
may be different from what is explained in this manual, due  
to the programming and disc structure; such differences are  
not a malfunction of this System.  
• This System can recognize up to 4 000 tracks in a disc.  
Also, the System can recognize up to 150 tracks per group  
and up to 99 groups in a disc.  
– If there are any unplayable files in a folder, those files are  
also counted in the total file number.  
– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is  
recommended for the highest resolution.  
– This System also supports the resolutions of 352 x 576/  
480 x 576/352 x 288 pixels (25 fps) and 352 x 480/480 x  
480/352 x 240 pixels (30 fps).  
– The file format should be MP@ML (Main Profile at  
Main Level)/SP@ML (Simple profile at Main Level)/  
MP@LL (Main Profile at Low Level).  
– Audio streams should conform to MPEG1 Audio layer-2  
or MPEG2 Audio Layer-2.  
– Playable files which do not belong to any groups are  
handled as group 1.  
• For DivX playback...  
• For DVD-VR playback...  
– This System can play only a disc of UDF-Bridge format.  
“Multi-border” is not supported.  
– The System supports DivX files whose resolution is 720  
x 480 pixels or less (30 fps), and 720 x 576 pixels or less  
(25 fps).  
– This System can play only a disc of UDF-Bridge format.  
– For details about DVD-VR format and play list, refer to  
the manual of the recording equipment.  
– You cannot use reverse slow motion, Program Play, or  
Random Play.  
– Audio stream should conform to MPEG1 Audio Layer-2  
or MPEG Audio Layer-3 (MP3).  
• For MP3 or WMA (for UX-G60 only) playback...  
– MP3/WMA discs require a longer readout time than  
regular CDs. (It depends on the complexity of the group/  
file configuration.)  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– This System can playback DivX files with the extension  
code <.divx> <.div> <.avi> (regardless of the letter  
case—upper/lower).  
– The System does not support GMC (Global Motion  
Compression).  
– The file encoded in the interlaced scanning mode may  
not be played back correctly.  
– You cannot use the following functions—One Touch  
Replay, Slow motion, A-B Repeat, Program Play,  
Random Play and on-screen operations.  
Playing Back a Disc/File for UX-G60:  
• Some DVD Audio discs prohibit downmix. When you  
playback such a disc, “LR ONLY” appears on the display  
and the System plays back the left front and right front  
signals.  
• When playing back a DVD Audio disc recorded in MLP  
(Meridian Lossless Packing; a lossless audio compression  
system that can completely recreate the PCM signal), the  
signals are recognized as the linear PCM signals, however,  
no indicator lights up on the display.  
• While the System is reading a disc, changing the source to  
USB MEMORY may cause the System to continue  
playback the DVD/CD source. In this case, press 7 on the  
main unit to reactivate the USB source.  
• The following functions cannot be used for the files in the  
USB mass storage class device:  
– You cannot playback a file larger than 2 Gigabyte.  
– When playing a file which has a large transfer rate,  
frames or sounds may be dropped during playback.  
– This System cannot recognize a USB mass storage class  
device whose rating is other than 5 V and does not exceed  
500 mA.  
– This System may not playback some USB mass storage  
class devices and does not support DRM (Digital Rights  
Management).  
– This System may not playback some files even though  
their formats are listed above.  
• For ASF playback...  
– This System can playback ASF files with the extension  
code <.asf> (regardless of the letter case—upper/lower).  
– This System supports ASF files whose resolution is 352  
x 288 pixels or less.  
– Some recorded files may not be able to playback  
depending on file characteristics, kind of digital camera/  
video camera, or recording conditions.  
– You cannot use the following functions—One Touch  
Replay, Slow motion, A-B Repeat, Program Play and  
Random Play.  
Playing Back a Portable Audio Device:  
• When QP Link fails due to a weak sound signal from the  
AUX jack, Auto Standby may turn the System off even if  
you can hear the sound from the speakers.  
In such cases, adjust the volume level of the component  
louder so that the System can detect the sound signal  
properly.  
– Selecting the View Angle (page 17)  
– Special Effect Playback (page 18)  
– Program Play (page 19)  
• Changing from AUX to another source while QP Link  
works will deactivate QP Link temporarily.  
In this case, the following reactivates QP Link:  
– Pressing QP LINK on the remote control twice.  
– Unplug the component from the AUX jack, then plug it  
in again.  
– A-B Repeat (page 21)  
– Time Search (page 24)  
• For playback of files in the USB mass storage class  
device...  
– When connecting a USB mass storage class device, refer  
also to its manual.  
• If you press  
(Standby/on) to turn the System off or if  
– Connect one USB mass storage class device to the  
System at a time. Do not use a USB hub.  
– You cannot charge any USB device through the USB  
MEMORY jack of this System.  
– While playing back a file in a USB mass storage class  
device, do not disconnect the device. It may cause a  
malfunction of both the System and the device.  
– JVC bears no responsibility for any loss of data in the  
USB mass storage class device while using this System.  
– When connecting with a USB cable, use the cable whose  
length is less than 1 m.  
preset Timer turns the System off while QP Link works, the  
System will deactivate QP Link temporarily.  
In such cases, the following reactivates QP Link:  
– When the sound signal from the AUX jack stops or is too  
weak for about 30 seconds after the System is turned off.  
– When you turn on the power again.  
• QP Link may start working when you just plug in the  
component to the AUX jack or unplug it. This is not a  
malfunction.  
– This System is compatible with the USB Full-Speed (not  
compatible with the USB 1.1).  
– You can playback the following types of files in a USB  
mass storage class device (maximum data transfer rate:  
2 Mbps):  
– Music: MP3, WMA  
– Picture: JPEG  
– Movie: MPEG-1, MPEG-2, ASF, DivX (maximum  
frame rate of 30 fps for progressive)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• There is leader tape which cannot be recorded onto at the  
start and end of cassette tapes. Thus, when recording CDs  
or radio broadcasts, wind the leader tape first to ensure that  
the recording will be made without any music part lost.  
• If you start recording with no cassette inserted, “NO REC”  
appears on the display. If a protected tape has been  
inserted, “NO REC” appears.  
• You cannot open or close the disc tray while recording a  
disc.  
Synchronized Recording:  
Daily Operations—Sound & Other Adjustments  
(see pages 12 to 15)  
Adjusting the Sound:  
• This function also affects the sound through the  
headphones.  
Changing the Scanning Mode (for UX-G60 only):  
• You cannot change the scanning mode to progressive in the  
following cases:  
– When your TV does not support the progressive video  
input.  
• Synchronized recording does not function on the file  
format of MPEG-1, MPEG-2, ASF*, and DivX.  
– When you have not connected your TV to the system  
using a component video cord.  
Setting the Clock:  
Enjoying Karaoke (for UX-G60 only) (see pages 30  
to 32) (Not available in the Australian model)  
Singing Along (Karaoke):  
• “0:00” will flash on the display until you set the clock.  
• The clock may gain or lose 1 to 2 minutes per month. If this  
happens, reset the clock.  
• Karaoke mode setting (Key Control and Vocal Masking)  
can be used when selecting “DVD/CD” or “USB  
MEMORY” as the source, except for DVD-VR/DVD  
Audio/MPEG-1/MPEG-2/ASF/DivX files.  
Even if the source is “DVD/CD” or “USB MEMORY,”  
Karaoke mode setting cannot be used while “NO DISC” or  
“NO DEVICE” appears on the display.  
• Karaoke mode setting is automatically canceled when the  
source is changed.  
• When selecting “DVD/CD” or “USB MEMORY” as the  
source, the microphone is not available while playback is  
stopped or paused. To use the microphone, activate Key  
Control or Vocal Masking.  
• Karaoke mode setting is also applied to the optical digital  
output signals.  
• When Vocal Masking is activated, 3D Phonic will be  
canceled temporarily.  
• On some music discs, Vocal Masking does not provide the  
correct effect.  
• You can also use the microphone when selecting “FM,”  
“AM,” or “AUX” as the source. When selecting “TAPE”  
as the source, you can use the microphone only during tape  
playback.  
Unique DVD/VCD Operations (see pages 16 to 18)  
Selecting the Audio Track:  
• On some DVD Video discs, you cannot change audio  
languages while playing back.  
Special Effect Playback:  
• During slow-motion playback, no sound will be  
reproduced.  
• While zoomed in, the picture may look coarse.  
Advanced Playback Operations (see pages 19  
to 25)  
Programming the Playing Order—Program Play:  
• While programming steps...  
Your entry will be ignored if you have tried to program an  
item number that does not exist (for example, selecting  
track 14 on a disc that only has 12 tracks).  
Playing Repeatedly:  
• A-B Repeat can be used within the same title while playing  
a DVD Video, and within the same track for the other discs.  
On-screen Disc Operations:  
• For DVD-R/-RW in the VR format, “PG” or “PL” appears  
instead of “TITLE” on the on-screen bar.  
Timer Operations (see pages 33 and 34)  
Setting the Timer:  
• If you do not specify the preset station or track number  
correctly while setting a timer, the currently selected  
station or the first track will be played when the timer is  
activated.  
Audio/Video File Operations (see pages 26  
and 27)  
Operations on the Control Screen:  
• If you press ON SCREEN on the remote control during  
playback, playback information appears on the TV screen.  
• When you unplug the AC power cord or if a power failure  
occurs, the timer will be canceled. You need to set the  
clock first, then the timer again.  
• If you set DVD Video as the source, Daily Timer will not  
work correctly.  
Advanced Tape Operations (see pages 28 and 29)  
Recording on a Tape:  
• The recording level is automatically set correctly. Thus,  
you can adjust the sound you are actually listening to  
without affecting the recording level.  
Timer Priority:  
• If you set the Sleep Timer after Daily Timer starts playing  
the selected source, Daily Timer is canceled.  
*
For UX-G60 only  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Operations (see pages 35 and 36)  
General:  
• If the upper and lower parts of the menu are cut off, adjust  
the picture size control of the TV.  
Cleaning the System  
• Stains should be wiped off with a soft cloth. If the System  
is heavily stained, wipe it with a cloth soaked in water-  
diluted neutral detergent and wrung well, then wipe clean  
with a dry cloth.  
LANGUAGE menu:  
• Since the System may deteriorate in quality, become  
damaged or get its paint peeled off, be careful about the  
following:  
– DO NOT wipe it with a hard cloth.  
– DO NOT wipe it forcefully.  
– DO NOT wipe it with thinner or benzine.  
– DO NOT apply any volatile substance such as  
insecticides to it.  
– DO NOT allow any rubber or plastic to remain in contact  
for a long time.  
• When the language you have selected for MENU  
LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is  
not recorded on a disc, the original language is used as the  
initial language.  
PICTURE menu—MONITOR TYPE:  
• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size  
may become 4:3 letter box while playing a disc. This  
depends on how the discs are recorded.  
• When you select “16:9/16:9 MULTI” for a picture whose  
aspect ratio is 4:3, the picture slightly changes due to the  
process for converting the picture width.  
OTHERS menu—ON SCREEN GUIDE:  
• The setup menu and on-screen bar will be displayed (and  
recorded) even though this function is set to “OFF.”  
Subtitles and the information for zoom-in always appear on  
the display regardless of this setting.  
To remove the speaker grilles (for UX-G60 only):  
Maintenance  
To get the best performance of the System, keep your discs,  
tapes and mechanism clean.  
Speaker  
grille  
Handling discs  
• Remove the disc from its case by holding it at the edge  
while pressing the center hole lightly.  
• Do not touch the shiny surface of the disc, or bend the disc.  
• Put the disc back in its case after use to prevent warping.  
• Be careful not to scratch the surface of the disc when  
placing it back in its case.  
Holes  
Projection  
• Avoid exposure to direct sunlight, extreme temperature,  
and moisture.  
To clean the disc:  
Wipe the disc with a soft cloth in a straight line from center  
to edge.  
Handling cassette tapes  
• If the tape is loose in its cassette, take up the slack by inserting  
a pencil in one of the reels and rotate it.  
– If the tape is loose, it may get stretched, cut, or caught in the  
cassette.  
• Be careful not to touch the tape surface.  
• Avoid the following places to store the tape—in dusty places,  
in direct sunlight or heat, in moist areas, on a TV or speaker,  
or near a magnet.  
To keep the best recording and playback sound quality:  
• Use a cotton swab moistened with alcohol to clean the heads,  
capstans, and pinch rollers.  
• Use a head demagnetizer (available at electronics and audio  
shops) to demagnetize the heads (when the System turned off).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
] You have changed the “FILE TYPE” setting after the  
System read the disc or the USB mass storage class  
device*. In this case, reload the disc or disconnect the  
USB mass storage class device* and connect it again.  
“NO AUDIO” appears.*  
Troubleshooting  
General:  
Adjustments or settings are suddenly canceled before  
you finish.  
] There is a time limit. Repeat procedure again.  
Operations are disabled.  
] The built-in microprocessor may malfunction due to  
external electrical interference. Unplug the AC power  
cord and then plug it back in.  
Unable to operate the System from the remote control.  
] The path between the remote control and the remote  
sensor on the System is blocked.  
] This System cannot playback illegally produced DVD  
Audio discs.  
“LR ONLY” appears.*  
] Some DVD Audio discs prohibit downmixed output.  
When you playback such a disc, this System plays back  
the left front and right front signals only.  
The disc sound is discontinuous.  
] The disc is scratched or dirty.  
No subtitle appears on the display though you have  
selected the initial subtitle language.  
] Some DVDs are programmed to always display no  
subtitle initially. If this happens, press SUBTITLE after  
starting playback (see page 17).  
Audio language is different from the one you have  
selected as the initial audio language.  
] Some DVDs are programmed to always use the original  
language initially. If this happens, press AUDIO/MPX  
after starting playback (see page 16).  
] The batteries are exhausted.  
No sound is heard.  
] Speaker connections are incorrect or loose.  
] Headphones are connected.  
No picture appears on the screen.  
] The video cord connections are incorrect or loose.  
No picture is displayed on the TV screen, the picture is  
blurred, or the picture is divided into two parts.  
] The System is connected to a TV which does not support  
progressive video input.  
The left and right edges of the picture are missing on the  
screen.  
] Select “4:3 LB” for “MONITOR TYPE” (see page 35).  
The disc tray does not open or close.  
] The AC power cord is not plugged in.  
] Child Lock is in use. “LOCKED” appears in the display  
window (see page 21).  
Radio Operations:  
Hard to hear broadcasts because of noise.  
] Antennas connections are incorrect or loose.  
] The AM loop antenna is too close to the System.  
] The FM antenna is not properly extended and positioned.  
Tape Operations:  
The cassette holder cannot be opened.  
] Power supply from the AC power cord has been cut off  
while the tape was running. Turn on the System.  
QP Link Operations:  
Disc/File Playback Operations:  
The disc does not play.  
] You have inserted a disc whose Region Code is not  
correct. (“RG ERROR” appears on the display.)  
] The disc is placed upside down. Place the disc with the  
label side up.  
The System automatically turns on even if the Timer  
turn the System to standby or if you turn the System to  
standby while playback is going on the portable audio  
device.  
] In this case, deactivate QP Link or stop playback on the  
device connected to the AUX jack.  
ID3 Tag on an MP3 or WMA* file cannot be shown.  
Recordings:  
Impossible to record.  
]
There are two types of ID3 Tag—Version 1 and Version 2.  
This System can only show ID3 Tag Version 1.  
] Small tabs on the back of the cassette are removed. Cover  
Groups and tracks are not played back as you expect.  
] The playing order is determined when the groups and  
tracks were recorded. It depends on the writing  
application.  
the holes with adhesive tape.  
Timer Operations:  
Daily Timer does not work.  
MP3, WMA*, JPEG, MPEG-1, MPEG-2, ASF* or DivX  
files are not played back.  
] The disc or the USB mass storage class device* may  
include both type of tracks (MP3 or WMA* files and  
JPEG files). In this case, you can only playback the files  
selected by the “FILE TYPE” setting (see page 35).  
] The System has been turned on when the on-time comes.  
Timer starts working only when the System is turned off.  
Daily Timer does not start playback.  
] The disc loaded is a DVD Video. Change the disc.  
] Title/group number and chapter/track number are not  
entered while setting the Daily Timer. Do not skip these  
steps when you want to play a disc using Daily Timer.  
*
For UX-G60 only  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
OM  
OR  
PA  
PL  
Javanese  
Georgian  
Kazakh  
SM  
SN  
SO  
SQ  
SR  
SS  
Samoan  
Shona  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
Afar  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
Kirghiz  
Latin  
Lingala  
Telugu  
Tajik  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Bislama  
Bengali, Bangla  
Tibetan  
Thai  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
EU  
FA  
FI  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
TK  
TL  
TN  
TO  
TR  
TS  
Breton  
Catalan  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Corsican  
Czech  
Turkish  
Tsonga  
Tatar  
Welsh  
Danish  
TT  
TW  
UK  
UR  
UZ  
VI  
Bhutani  
Greek  
Malay (MAY)  
Maltese  
Twi  
Ukrainian  
Urdu  
Esperanto  
Estonian  
Basque  
Burmese  
Nauru  
Uzbek  
Nepali  
Vietnamese  
Volapuk  
Wolof  
Persian  
Dutch  
VO  
WO  
XH  
YO  
ZU  
Finnish  
Norwegian  
Occitan  
FJ  
Fiji  
Xhosa  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
Faroese  
Frisian  
(Afan) Oromo  
Oriya  
Yoruba  
Zulu  
Irish  
Panjabi  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Polish  
PS  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
PT  
QU  
RM  
RN  
RO  
RW  
SA  
Hindi  
HR  
HU  
HY  
IA  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Rumanian  
Kinyarwanda  
Sanskrit  
SD  
Sindhi  
IE  
SG  
SH  
SI  
Sangho  
IK  
Serbo-Croatian  
Singhalese  
Slovak  
IN  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
IS  
SK  
SL  
IW  
JI  
Slovenian  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTICAL DIGITAL OUT Signals  
DIGITAL AUDIO  
OUTPUT  
Output Signals  
Playback disc/file  
STREAM/PCM  
DOLBY DIGITAL/PCM  
PCM ONLY  
DVD Video  
2
with 48 kHz, 16/20/24 bit Linear PCM  
with 96 kHz, Linear PCM  
with Dolby Digital  
48 kHz, 16 bit Linear PCM*  
48 kHz, 16 bit Linear PCM  
Dolby Digital bitstream  
DTS bitstream  
48 kHz, 16 bit Linear PCM  
with DTS  
48 kHz, 16 bit Linear PCM  
1
DVD Audio*  
with 48/96/192 kHz, 16/20/24 bit  
Linear PCM  
48 kHz, 16 bit Linear PCM  
44.1 kHz, 16 bit Linear PCM  
with 44.1/88.2/176.4 kHz,  
16/20/24 bit Linear PCM  
with Dolby Digital  
with DTS  
Dolby Digital bitstream  
DTS bitstream  
48 kHz, 16 bit Linear PCM  
48 kHz, 16 bit Linear PCM  
48 kHz, 16 bit Linear PCM  
DVD-R/-RW/-ROM in DVD-VR format  
with 48 kHz, 16/20/24 bit Linear PCM  
with Dolby Digital  
2
48 kHz, 16 bit Linear PCM*  
Dolby Digital bitstream  
SVCD, VCD, CD  
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM  
DTS bitstream 44.1 kHz, 16 bit Linear PCM  
32/44.1/48 kHz, 16 bit Linear PCM  
32 kHz, 16 bit Linear PCM  
CD with DTS  
1
MP3/WMA* /DivX disc/file  
1
ASF* disc/file  
1
* For UX-G60 only  
2
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL  
OUT terminal if the discs are not copy-protected.  
Operating JVC’s TVs Using the Remote Control  
You can use the remote control to operate JVC’s TVs.  
Remote control  
TV  
Turn on/off TV.  
TV/VIDEO  
Change the input mode.  
While holding SHIFT, press...  
TV VOL +,– Adjust the volume.  
TV CH Change the channels.  
TV  
TV/VIDEO  
,
TV CH  
,
TV VOL  
+,–  
SHIFT  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power consumption (UX-G60/UX-G55):  
125 W/65 W (at operation)  
Specifications  
14 W/11 W (at standby)  
3.5 W/3.5 W (at standby dimmer OFF mode)  
Amplifier section  
CA-UXG60 (for UX-G60)/CA-UXG55 (for UX-G55)  
Output Power:  
Dimensions (approx.):  
170 mm x 250 mm x 342 mm  
(W/H/D)  
UX-G60: 5.7 kg/UX-G55: 4.7 kg  
CA-UXG60: 120 W (60 W + 60 W) at 6 (10% THD)  
Mass (approx.):  
CA-UXG55:  
Audio Input AUX:  
50 W (25 W + 25 W) at 6 (10% THD)  
500 mV/50 k(at “AUX LVL1”)  
250 mV/50 k(at “AUX LVL2”)  
125 mV/50 k(at “AUX LVL3”)  
OPTICAL DIGITAL OUT:  
Speaker section  
SP-UXG63 (for UX-G60)  
Speaker units:  
Tweeter:  
Squawker:  
Woofer:  
1.5 cm dome x 1  
4 cm cone x 1  
13.5 cm cone x 1  
6 Ω  
Digital output:  
–21 dBm to –15 dBm (660 nm 30 nm)  
USB MEMORY (for CA-UXG60 only)  
Digital input:  
Video Out:  
Impedance:  
Dimensions (approx.):  
166 mm x 250 mm x 232 mm  
(W/H/D)  
Color system:  
NTSC or PAL (interlaced/progressive*)  
VIDEO (composite):  
S-VIDEO:Y (luminance)  
1 V(p-p)/75 Ω  
1 V(p-p)/75 Ω  
Mass (approx.):  
SP-UXG55 (for UX-G55)  
Speaker units:  
2.8 kg each  
C (chrominance, burst)  
10 cm cone x 1  
NTSC  
PAL  
0.286 V(p-p)/75 Ω  
0.3 V(p-p)/75 Ω  
1 V(p-p)/75 Ω  
0.7 V(p-p)/75 Ω  
6 – 16 Ω  
Impedance:  
Dimensions (approx.):  
6 Ω  
145 mm x 250 mm x 200 mm  
(W/H/D)  
COMPONENT: (Y)  
(PB/PR)  
Speaker impedance:  
Mass (approx.):  
2 kg each  
Supplied Accessories  
See page 3.  
Tuner section  
FM tuning range:  
87.50 MHz – 108.00 MHz  
Design and specifications are subject to change without notice.  
AM (MW) tuning range:  
• Manufactured under license from Dolby Laboratories. “Dolby”,  
“Pro Logic”, “MLP lossless”, and the double-D symbol are  
trademarks of Dolby Laboratories.  
531 kHz – 1 710 kHz (at 9 kHz intervals)  
530 kHz – 1 710 kHz (at 10 kHz intervals)  
For Saudi Arabia only:  
• “DTS” and “DTS 2.0+ Digital Out” are trademarks of Digital  
Theater Systems, Inc.  
531 kHz – 1 602 kHz (at 9 kHz intervals)  
530 kHz – 1 600 kHz (at 10 kHz intervals)  
®
®
• “Official DivX Certified product” “Plays all versions of DivX  
®
®
video (including DivX 6) with standard playback of DivX  
Tape section  
media files” “DivX, DivX certified, and associated logos are  
trademarks of DivX, Inc. and are used under licence.”  
Frequency response:  
Wow and flutter:  
Disc/file player section  
60 Hz – 14 000 Hz  
0.15 % (WRMS)  
®
• “Official DivX Ultra Certified product” “Plays all versions of  
®
®
®
DivX video (including DivX 6) with enhanced playback of  
®
DivX media files and the DivX Media Format” “DivX, DivX  
Ultra Certified, and associated logos are trademarks of DivX, Inc.  
and are used under licence.”  
Region codes:  
Middle East: 2  
• USE OF THIS PRODUCT IN ANY MANNER THAT  
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS  
PROHIBITED, EXCEPT FOR USE BY A CONSUMER  
ENGAGING IN PERSONAL AND NON-COMMERCIAL  
ACTIVITIES.  
• This product incorporates copyright protection technology that is  
protected by U.S. patents and other intellectual property rights.  
Use of this copyright protection technology must be authorized by  
Macrovision, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE  
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE  
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS  
RECOMMENDED THAT THE USER SWITCH THE  
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.  
IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE  
CENTER.”  
South East Asia, Hong Kong region: 3  
Central and South America, Australia: 4  
Playable disc:  
DVD Video/DVD Audio*/CD/VCD/SVCD/CD-R/CD-  
RW (CD/SVCD/VCD/MP3/WMA*/JPEG/MPEG-1/  
MPEG-2/ASF*/DivX format)  
DVD-R/-RW (DVD-VR/DVD Video/MP3/WMA*/JPEG/  
MPEG-1/MPEG-2/ASF*/DivX format)  
+R/+RW(DVD-Video format)  
DVD-ROM (DVD Video/DivX format)  
Playable file:  
MP3/WMA*/JPEG/MPEG-1/MPEG-2/ASF*/DivX format  
Dynamic range:  
80 dB  
500 lines  
Immeasurable  
Horizontal resolution:  
Wow and flutter:  
General  
Power requirement:  
AC 110 V/AC 127V/AC 220 V/AC 230 V-240V  
(adjustable with the voltage selector), 50 Hz/60 Hz  
For Hong kong:  
For Oceanian countries:  
AC 220 V  
AC 240 V , 50 Hz  
, 50 Hz  
*
For UX-G60 only  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Index  
PHONES  
-
#
2
7
@
7
Remote control  
REC  
28, 29, 30  
5
12  
10  
Button  
AUDIO  
TV  
Page  
Remote sensor  
SOUND TURBO II  
TAPE  
g
h
t
u
,
y
q
n
5
;
7
o
Q
b
f
E
4
9
j
3
/
a
r
x
W
.
e
b
m
,
c
q
x
l
1
c
i
;
P
P
w
8
l
w
s
2
u
d
i
v
p
q
Q
k
e
z
6
7
43  
7
10, 11, 18, 20, 27, 28, 29  
9, 10  
9, 10, 11, 20, 27  
10, 18, 20, 27, 29  
9, 11, 14, 15, 18, 23, 25, 27, 33, 34, 35  
18  
13  
12  
17  
16, 30  
7, 13  
7, 10  
15  
13  
18  
20, 34  
15, 33, 34  
14  
15  
13  
7, 10, 27  
31  
12  
8, 19, 20  
7, 8, 28  
7, 8, 28  
10, 27  
10  
31  
31  
11, 25  
14  
¢
4
UP, DOWN  
9& 8, 20  
¡
¢
8
1
4
,
,
USB MEMORY jack (UX-G60)  
(
3
%
5
#
8
USB MEMORY  
VOLUME + , –  
/
(UX-G60)  
7, 10, 27, 28, 29, 31  
12, 30, 31  
,
,
,
, ENTER/SET  
(One-Touch Replay)  
3D PHONIC  
AHB PRO  
ANGLE  
AUDIO/MPX  
AUDIO VOL + , –  
AUX (UX-G55)  
A.STANDBY  
BASS/TREBLE  
C.VOICE  
CANCEL  
CLOCK/TIMER  
DIMMER  
DISPLAY  
DVD/AUX LEVEL  
Remote control  
1
2
3
4
5
f
g
h
j
1
4
2
5
8
0
3
6
6
7
8
k
l
/
z
x
9
7
10  
10  
9
p
q
w
e
r
t
y
3
DVD/CD  
ECHO (UX-G60)*  
FADE MUTING  
c
v
b
n
m
,
.
FM/PLAY MODE  
FM/AM (UX-G55)  
FM/AM/AUX (UX-G60)  
GROUP/TITLE  
GROUP/TITLE SKIP  
KARAOKE (UX-G60)*  
u
i
o
;
a
s
d
,
KEY  
(UX-G60)*  
MENU/PL  
P
Q
NTSC/PAL (UX-G55)  
Number buttons  
ON SCREEN  
PAGE (UX-G60)  
QP LINK  
9, 11, 18, 19, 24, 25  
23  
17  
11  
21  
21  
32  
11  
W
E
REPEAT  
REPEAT A-B  
RESERVE (UX-G60)*  
RETURN  
SCAN MODE (UX-G60)  
SET UP  
SHIFT  
14  
35  
This remote control can also operate JVC’s TVs  
(see page 43).  
10, 11, 13, 14, 15, 17, 18, 21, 27, 31, 32, 33, 34, 43  
15  
18  
12  
17  
7
11, 25  
43  
SLEEP  
9
(
SLOW  
,
Main unit  
SOUND TURBO II  
SUBTITLE  
*
*
=
1
TAPE  
TOP MENU/PG  
~
9
(
TV CH  
,
TV VOL + , –  
TV/VIDEO  
43  
43  
2
3
3
USB MEMORY (UX-G60)  
VFP  
ZOOM  
7, 10, 27, 28, 29, 31  
14  
18, 27  
4
5
6
!
@
#
Main unit  
Button  
Page  
7
10, 21  
10, 21  
13  
7
5
9, 28  
6
15  
7, 10, 27, 28, 29, 31  
7, 8, 28  
7, 8, 28  
30, 31  
30, 31  
& STANDBY lamp  
7
8
7
$
0
^
$
!
*
~
3
6
5
4
!
1
=
0
%
^
3D-PHONIC  
AUX (UX-G55)  
AUX jack  
Cassette holder  
Display  
8
9
0
&
-
*
DISPLAY  
# 8  
DVD/CD  
/
FM/AM (UX-G55)  
(
The illustration above is UX-G60.  
FM/AM/AUX (UX-G60)  
MIC jack (UX-G60)*  
MIC VOLUME (UX-G60)*  
* Not on the Australian model.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,  
Australia, and U.K.)  
VOLTAGE  
SELECTOR  
VOLTAGE  
SELECTOR  
127V  
110V  
230V  
-240V  
220V  
110V  
127V  
220V  
230V  
-240V  
The illustration above is UX-G60 (except for Hong Kong region and Australia).  
CAUTION for mains (AC) line  
BEFORE PLUGGING IN, do check  
that your mains (AC) line voltage  
corresponds with the position of the  
voltage selector switch provided on  
the outside of this equipment and, if  
different, reset the voltage selector  
switch, to prevent from a damage or  
risk of fire/electric shock.  
EN  
© 2006 Victor Company of Japan, Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0206JSKMDCJEM  

Indesit Washer Dryer PWDE 8148 S User Manual
Invacare Mobility Aid 1049522 User Manual
Jensen MP3 Player SMP 1GBEB User Manual
Karcher Vacuum Cleaner BR VS 400 User Manual
Kawasaki Grinder 840109 User Manual
Kenmore Range 7909662 User Manual
Kenwood Two Way Radio TK 3160 User Manual
Kidde Smoke Alarm 1275E User Manual
KitchenAid Food Processor KFPM770 User Manual
Kolcraft Baby Accessories Begba User Manual