JVC Projection Television 0705JGI II IM User Manual

Projection Television Users Guide  
For Models:  
AV-48P776  
AV-56P776  
AV-48P786  
AV-56P786  
TV CATV VCR DVD  
POWER  
INPUT  
D/A  
SLEEP  
TIMER DISPLAY C.C.  
THEATER PRO  
1
4
2
3
6
9
VIDEO STATUS  
ASPECT  
5
7
8
0
RETURN+  
/TV  
SUB CH  
TUNE  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH  
+
VOL  
VOL  
+
CH  
MENU  
BACK  
VCR CHANNEL VCR/DVD  
TV/VCR  
POWER  
PREV NEXT  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1270G  
TV  
Illustration of AV-56P776 and RM-C1270G  
Important Note:  
In the spaces below, enter the model and serial number of your television (located  
at the rear of the television cabinet). Staple your sales receipt or invoice to the  
inside cover of this guide. Keep this user’s guide in a convenient place for future  
reference. Keep the carton and original packaging for future use.  
Model Number:  
LCT1885-001A-A  
Serial Number:  
0705JGI-II-IM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• As an “ENERGY STAR®” partner, JVC has determined  
that this product or product model meets the “ENERGY  
STAR®” guidelines for energy efciency.  
Important Safeguards  
CAUTION:  
Please read and retain for your safety.  
Electrical energy can perform many useful functions. This TV set has been engineered and  
manufactured to assure your personal safety. But improper use can result in potential  
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this  
TV set, observe the following basic rules for its installation, use and servicing. Also follow all  
warnings and instructions marked on your TV set.  
INSTALLATION  
(POLARIZED-TYPE)  
1 Your TV set is equipped with a polarized AC line plug (one  
blade of the plug is wider than the other). This safety feature  
allows the plug to fit into the power outlet only one way.  
Should you be unable to insert the plug fully into the outlet,  
try reversing the plug. Should it still fail to fit, contact your  
electrician.  
2 Operate the TV set only from a power source as indicated on the TV set or refer to the  
operating instructions for this information. If you are not sure of the type of power supply to  
your home, consult your TV set dealer or local power company. For battery operation, refer  
to the operating instructions.  
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords  
and broken plugs. They may result in a shock or fire hazard. Call your service technician for  
replacement.  
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set  
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.  
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or  
laundry tub, in a wet basement, or near swimming pool, etc.  
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded  
so as to provide some protection against voltage surges and built-up static charges.  
Section 810 of the National Electrical Code provides information with respect to proper  
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of antenna discharge unit, connection  
requirements for the grounding electrode.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 An outside antenna system should not be located in the vicinity of overhead power lines  
or other electric light or power circuits, or where it can fall into such power lines or circuits.  
When installing an outside antenna system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them might be fatal.  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRICAL  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ARTICLE 250, PART H)  
NEC - NATIONAL ELECTRIC CODE  
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during  
operation to be released.  
Therefore:  
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,  
rug, etc.  
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.  
— Never cover the openings with a cloth or other material.  
— Never place the TV set near or over a radiator or heat register.  
9 To avoid personal injury:  
— Do not place a TV set on a sloping shelf unless properly secured.  
— Use only a cart or stand recommended by the TV set manufacturer.  
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.  
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a  
mounting kit approved by the manufacturer.  
Use  
10 Caution children about dropping or pushing objects into the TV set through cabinet  
openings. Some internal parts carry hazardous voltages and contact can result in a fire or  
electrical shock.  
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol  
cleaner.  
12 Never add accessories to a TV set that has not been designed for this purpose. Such  
additions may result in a hazard.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
13 For added protection of the TV set during a lightning storm or when the TV set is to be left  
unattended for an extended period of time, unplug it from the wall outlet and disconnect the  
antenna. This will prevent damage to product due to lightning storms or power line surges.  
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the TV set and cart combination to overturn.  
Service  
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the TV set.  
C. If the TV set has been exposed to rain or water.  
D. If the TV set does not operate normally by following the operating instructions. Adjust  
only those controls that are covered in the operating instructions as improper adjustment  
of other controls may result in damage and will often require extensive work by a  
qualified technician to restore the TV set to normal operation.  
E. If the TV set has been dropped or damaged in any way.  
F. When the TV set exhibits a distinct change in performance — this indicates a need for  
service.  
16 Do not attempt to service this TV set yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service  
personnel.  
17 When replacement parts are required, have the service technician verify in writing that the  
replacement parts he uses have the same safety characteristics as the original parts. Use  
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.  
18 Upon completion of any service or repairs to this TV set, please ask the service technician  
to perform the safety check described in the manufacturer’s service literature.  
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture  
tube implosion. Ask a qualified service technician to dispose of the TV set.  
20 Note to CATV system installer.  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of  
the NEC that provides guidelines for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of the building, as close to the  
point of cable entry as practical.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Screen Burn-in  
Displaying xed images on your screen for extended periods of time can leave a subtle but  
permanent ghost image in your screen. This is referred to as "burn-in". To avoid this, mix your  
viewing patterns and aspect modes from time to time.  
Examples include, but are not limited to the following:  
For example...  
• Stock-market report bars  
TV off  
TV on  
• Shopping channel logos and pricing displays  
• Video game patterns or scoreboards  
• Bright station logos  
• Internet web sites or other computer-style  
images.  
• DVD discs, video tapes, laser discs  
• Broadcast, cable, satellite channels or digital  
television tuners/converters.  
XYZ  
XYZ  
• Aspect modes that leave solid black bars  
on the top and bottom, or both sides of the  
screen.  
Note: Warranty DOES NOT cover screen  
burn-in or uneven picture tube aging.  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safety Precautions . 2  
Warnings . . . . . . . . . . . . 6  
Quick Setup . . . . . . . . . . . 9  
Sound Adjust . . . . . . . . . 55  
Sound Settings . . . . . . . . . . . . . 55  
Adjust Sound Settings . . . . . . . . . 55  
Reset . . . . . . . . . . . . . . . . 55  
Clock/Timers . . . . . . . . . . 56  
Set Clock . . . . . . . . . . . . . . . . 56  
On/Off Timer . . . . . . . . . . . . . . . 57  
Unpacking your TV . . . . . . . . . . . . 9  
TV Models . . . . . . . . . . . . . . . . 11  
TV Remote Control . . . . . . . . . . . 12  
Getting Started . . . . . . . . . . . . . 13  
The Remote Control . . . . . . . . . . 13  
Connecting Your Devices . . . . . . . 14  
Interactive Plug In Menu . . . . . . . . 23  
Button Functions . . . . . . . 58  
Power . . . . . . . . . . . . . . . . . . 58  
Number Buttons . . . . . . . . . . . . . 58  
Tune  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
58  
Remote Programming . . . . . 26  
Input . . . . . . . . . . . . . . . . . . . 58  
Channel +/-  
Volume +/-  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
58  
58  
Setting CATV, VCR and DVD Codes . . . 26  
CATV or Satellite Codes . . . . . . . . 26  
VCR Codes . . . . . . . . . . . . . . 27  
DVD Codes . . . . . . . . . . . . . . 28  
Search Codes . . . . . . . . . . . . . 29  
.
.
.
Return+/TV . . . . . . . . . . . . . . . 59  
Sound . . . . . . . . . . . . . . . . . . 59  
Video Status . . . . . . . . . . . . . . . 60  
TheaterPro D6500K . . . . . . . . . . . 60  
Sleep Timer . . . . . . . . . . . . . . . 61  
ML/MTS . . . . . . . . . . . . . . . . . 61  
Muting . . . . . . . . . . . . . . . . . . 61  
Display . . . . . . . . . . . . . . . . . 62  
C.C. . . . . . . . . . . . . . . . . . . . 62  
Favorite . . . . . . . . . . . . . . . . 63  
Aspect . . . . . . . . . . . . . . . . . 64  
Aspect Ratios . . . . . . . . . . . . . 65  
Menu . . . . . . . . . . . . . . . . . . 65  
OK . . . . . . . . . . . . . . . . . . . 65  
Back . . . . . . . . . . . . . . . . . . . 65  
TV/CATV Slide Switch . . . . . . . . . . 66  
VCR/DVD Slide Switch . . . . . . . . . 66  
VCR Buttons . . . . . . . . . . . . . . . 66  
DVD Buttons . . . . . . . . . . . . . . . 66  
Super Focus . . . . . . . . . . . . . . . 66  
Onscreen Menus . . . . . . . . 30  
Using the Guide . . . . . . . . . . . . . 30  
Onscreen Menu System . . . . . . . . . 31  
Initial Setup . . . . . . . . . . 33  
Auto Tuner Setup . . . . . . . . . . . . 33  
Channel Summary . . . . . . . . . . . . 34  
Channel Label . . . . . . . . . . . . . 35  
V-Chip . . . . . . . . . . . . . . . . . . 36  
Set Lock Code . . . . . . . . . . . . . 42  
Adjusting CRT Color Convergence . . . . 43  
Language . . . . . . . . . . . . . . . . 45  
Closed Caption . . . . . . . . . . . . . 46  
Auto Shut Off . . . . . . . . . . . . . . 48  
XDS ID . . . . . . . . . . . . . . . . . 48  
Noise Muting . . . . . . . . . . . . . . 48  
Front Panel Lock . . . . . . . . . . . . 49  
V1 Smart Input  
Video Input Label  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49  
50  
Position Adjustment . . . . . . . . . . . 51  
Power Indicator . . . . . . . . . . . . . 51  
Digital-In . . . . . . . . . . . . . . . . . 52  
Digital-In Audio . . . . . . . . . . . . . 52  
Picture Adjust . . . . . . . . . 53  
Picture Settings . . . . . . . . . . . . . 53  
Adjust Picture Settings . . . . . . . . . 53  
Color Temperature . . . . . . . . . . . . 53  
Digital Noise Clear . . . . . . . . . . . . 53  
VSM  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
54  
Natural Cinema . . . . . . . . . . . . . . . . 54  
Reset . . . . . . . . . . . . . . . . . . 54  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Digital Setup . . . . . . . . . 67  
Digital Setup . . . . . . . . . . . . . 67  
Antenna Level . . . . . . . . . . . . . 67  
Digital Sound . . . . . . . . . . . . . 68  
Software Version . . . . . . . . . . . . . 68  
Software Update . . . . . . . . . . . . 68  
Digital Button Functions . . . 69  
Digital CH D/A (Digital/Analog) . . . . . 69  
Sub Channel . . . . . . . . . . . . . 69  
Guide . . . . . . . . . . . . . . . 69  
OSD Information . . . . . . 70  
Weak Signal . . . . . . . . . . . . . 70  
No Program . . . . . . . . . . . . . 70  
Appendices . . . . . . . . . . 71  
Troubleshooting . . . . . . . . . . . . . 71  
Warranty  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
72  
Authorized Service Center . . . . . . . . . . 73  
Specifications . . . . . . . . . . . . . 74  
Notes . . . . . . . . . . . . . . . . . 75  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items. In addition to this  
guide, your television box should include:  
Two AA  
Batteries  
1 Remote Control  
1 Television  
TV CATV VCR DVD  
POWER  
INPUT  
D/A  
SLEEP  
TIMER DISPLAY C.C.  
THEATER PRO  
1
2
3
6
9
VIDEO STATUS  
4
5
ASPECT  
7
8
0
TUNE  
RETURN+  
/TV  
SUB CH  
Note: Your television  
and/or remote  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH  
+
VOL  
VOL  
+
control may differ  
from the examples  
illustrated here.  
DIGITAL IMAGE SCALING TECHNOLOGY  
CH  
POWER  
PULL/OPEN  
MENU  
BACK  
VCR CHANNEL VCR/DVD  
PREV NEXT  
TV/VCR  
POWER  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1270G  
TV  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Once you have unpacked your television, the next step is to connect it to your antenna/  
cable or satellite system and to connect the audio/video devices you want to use with your  
television. To make these connections you will use plugs like the ones illustrated below.  
Component Cables  
Composite Cables  
Audio Cables  
Coaxial Cables  
Used to connect an  
external antenna or  
cable TV system to  
your TV.  
Used to connect audio/  
video devices like  
VCRs, DVD players,  
stereo amplifiers, game  
consoles, etc.  
S-Video Cable  
Used to make video  
connections with S-Video  
VCRs, Camcorders and  
DVD players.  
We recommend that before you start using your new television, you read your entire User’s  
Guide so you can learn about your new television’s many great features. If you’re anxious to  
start using your television right away, a quick setup guide follows on the next few pages.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Models  
NOTE: Before you connect your television to another device, please refer to the proper  
diagrams for your specific TV and remote. These will help assist you in understanding  
how to connect your television to another device, as well as use the remote to set up  
your television.  
Rear Panel Diagram  
MODELS:  
AV-48P776  
AV-56P776  
AV-48P786  
UNPLUG THE POWER CORD FROM  
AC OUTLET BEFORE REMOVING THE  
REAR COVER  
AV-56P786  
When the rear cover is removed, follow  
"CAUTION AT DISASSEMBLY" procedure in  
the service manual before plugging the TV's  
power cord into an AC outlet. Failure to  
follow the procedure will result in  
PERMANENT damage to some of the  
television features.  
DÉBRANCHEZ LE CORDON DE LA PRISE DE  
COURANT C.A. AVANT DE RETIRER LE  
COUVERCLE ARRIÈRE.  
Une fois le couvercle arrière déposé suivez la  
procédure ««ATTENTION LORS DU  
DÉMONTAGE»» décrite dans la manuel de  
service avant de brancher le cordon du  
Note: The terminal  
labeled "SERVICE  
téléviseur dans une prise c.a. L'omission de  
suivre la procédure causera des dommages  
PERMANENTS  
téléviseur.  
à
certaines fonctions du  
ONLY", is exclusively  
used to update the  
software version.  
Manufactured under license from  
Dolby Laboratories. "Dolby" and  
the double-D symbol are  
trademarks of Dolby Laboratories.  
SERVICE  
ONLY  
DIGITAL-IN  
VIDEO  
(DIGITAL)  
AUDIO  
(DIGITAL)  
AUDIO  
AUDIO  
VIDEO  
S-VIDEO  
COMPONENT VIDEO  
OUT  
R
L
Y
Pb  
Pr  
75Ω  
(VHF/UHF)  
INPUT-3  
INPUT-2  
INPUT-1  
R
OVER  
OVER  
OPTICAL OUT  
L
Digital  
Audio  
Front Panel Diagram  
IN  
P
U
T
-
4
S-VIDE  
O
VIDEO  
R
O
V
E
AUDIO  
L
/
M
ON  
O
R
II
DIGITAL IMAG  
POWER  
E
SCALING  
T
MENU  
ECHNOLOG  
CHANNEL  
+
Y
POWER  
VO  
L
UME  
+
OPE  
RA  
TE  
SUPER  
FOCUS  
PULL/OPEN  
PULL/OPEN  
Pull to open the door  
PULL/OPEN  
DIGITAL IMAGE SCALING TECHNOLOGY  
POWER  
PULL/OPEN  
INPUT- 4  
S-VIDEO VIDEO  
OVER  
AUDIO  
MONO  
L
/
R
MENU  
CHANNEL  
VOLUME  
SUPER  
FOCUS  
+
+
OPERATE  
MODELS: AV-48P776, AV-56P776, AV-48P786, AV-56P786  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Remote Control  
POWER  
TV CATV VCR DVD  
INPUT  
D/A  
SLEEP  
TIMER DISPLAY C.C.  
THEATER PRO  
1
2
3
6
9
VIDEO STATUS  
4
5
ASPECT  
7
8
0
RETURN+  
/TV  
TUNE  
SUB CH  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH +  
VOL  
+
VOL  
CH –  
MENU  
BACK  
VCR/DVD  
POWER  
VCR CHANNEL  
PREV NEXT  
TV/VCR  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1270G  
TV  
RM-C1270G  
• For information on remote control buttons, see pages 58 - 66.  
• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an  
ATSC antenna or Digital Cable, you can use these buttons.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Getting Started  
These quick setup pages will provide you, in three easy steps, with the basic information you  
need to begin using your new television right away.  
If you have questions, or for more detailed information on any of these steps, please consult  
other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you first  
need to install the batteries (included).  
Lift and pull the latch on the back of the remote control  
to open. Insert two batteries (included) carefully noting  
the “+” and “–” markings, placing the “–” end in the unit  
first. Snap the cover back into place.  
When you change the batteries, try to complete the  
task within three minutes. If you take longer than  
three minutes, the remote control codes for your VCR, DVD, and/or cable box/satellite  
receiver may have to be reset. See pages 26 - 29.  
Key Feature Buttons  
The four key feature buttons at the center of the remote can be  
MUTING  
OK  
used for basic operation of the television. The top and bottom  
buttons will scan forward and back through the available  
channels. To move rapidly through the channels using  
JVC’s Hyperscan feature, press and hold CH+ or CH–. The  
channels will zip by at a rate of five channels per second. The  
right and left buttons will turn the volume up or down. These  
buttons are also marked with four arrows and are used with  
JVC’s onscreen menu system. To use the onscreen menus,  
press the MENU button.  
CH +  
CH –  
VOL  
+
VOL  
MENU  
BACK  
Basic Operation  
TV CATV  
Turn the television on and off by pressing the POWER button at the top right corner  
of the remote. If this is the first time you are turning on the TV, the interactive  
plug-in menu appears.  
V VCR DVD  
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 26 to 29 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
POWER  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Step 2 – Connecting Your Devices  
Notes:  
• These connections are examples.  
• After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
To connect a DVD player, see VCR Connection. A DVD player is optional  
• If you have a satellite television system, refer to the satellite TV manual.  
No VCR Connection  
Cable or Antenna Output  
Coaxial Cable  
75Ω  
(VHF/UHF)  
OR  
TV Rear Panel  
OUT IN  
Cable Box  
Note:  
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of  
the TV.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
VCR Connection  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #1  
Cable or Antenna  
Output  
VCR  
R
L
V
IN  
IN  
OUT  
OUT  
Coaxial Cable  
(Attachment)  
OR  
AUDIO  
OUT  
AUDIO  
VIDEO  
S-VIDEO  
COMPONENT VIDEO  
Pb Pr  
R
Y
75Ω  
(VHHF)  
INPUT-3  
INPUT-2  
INPUT-1  
R
L
OVER  
OVER  
OPTICAL OUT  
Digital  
Audio  
TV Rear Panel  
Y
Green  
Blue  
P
P
B
R
Red  
UDOUT  
O
L
R
DVD Player (OPTIONAL)  
Note:  
• If this connection setup does not work for you, try the connection setup on page 16.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Diagram #2  
Cable or Antenna  
Output  
VCR  
IN  
Two-Way Splitter  
OUT OUT  
R
L
V
IN  
IN  
OUT  
OUT  
Coaxial Cable  
(Attachment)  
OR  
AUDIO  
OUT  
AUDIO  
VIDEO  
S-VIDEO  
COMPONENT VIDEO  
Pb Pr  
R
Y
75Ω  
(VHHF)  
INPUT-3  
INPUT-2  
INPUT-1  
R
L
OVER  
OVER  
OPTICAL OUT  
Digital  
Audio  
TV Rear Panel  
Y
Green  
Blue  
P
P
B
R
Red  
UDOUT  
O
L
R
DVD Player (OPTIONAL)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the front input jacks (Input 4) located under the front panel door. To access, pull on the door  
to open it. You can also connect these using the television’s rear input jacks, using the same  
instructions.  
INPUT- 4  
S-VIDEO VIDEO  
AUDIO  
L / MONO  
OVER  
R
MENU  
CHANNEL  
VOLUME  
SUPER  
FOCUS  
+
+
OPERATE  
CAMCORDER  
- OR -  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.  
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on  
the front of the TV.  
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on  
the front of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
L/MONO on the front of the TV.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an External Amplifier  
TV Rear Panel  
AUDIO  
OUT  
Speaker  
Speaker  
R
Amplifier  
L
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the  
LEFT AUDIO INPUT on the amplifier.  
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the  
RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an amplifier using your optical output  
You can connect an amplifier that has an optical digital input terminal by using an optical digital  
cable from the optical output. The signal that is output can be PCM or Dolby Digital.  
TV Rear Panel  
OPTICAL OUT  
Digital Audio  
Amplifier  
1) Connect the optical cable from the back of the TV to the back of the amplifier.  
Notes:  
• This terminal can only output digital audio.  
• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in  
the Digital Setup Menu. See page 68.  
• Refer to your owners manual on using your amplifier.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in  
their digital form.  
DTV Decoder  
AUDIO  
OUT  
AUDIO  
VIDEO  
S-VIDEO  
COMPONENT VIDEO  
Y Pb Pr  
R
L
75Ω  
DIGITAL OUT  
AUDIO OUT  
(VHF/UHF)  
INPUT-3  
INPUT-2  
INPUT-1  
L
R
R
L
OVER  
OVER  
OPTICAL OUT  
Digital  
Audio  
TV Rear Panel  
DIGITAL-IN  
HDMI to DVI Cable  
VIDEO  
(DIGITAL)  
AUDIO  
(DIGITAL)  
After the connections have been made,  
tighten the screw to secure the cables.  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the DIGITAL-IN on the back of your television.  
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO IN into  
VIDEO-3 on the back of your television.  
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO IN into  
VIDEO-3 on the back of your television.  
• The digital-in terminal is not compatible with the picture signal of a personal computer.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer  
to page 52.)  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
ANALOG. See "DIGITAL-IN AUDIO", page 52.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a HDMI Compatible Device  
By connecting a HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible device.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Compatible Device  
DIGITAL OUT  
AUDIO OUT  
L
R
TV Rear Panel  
DIGITAL-IN  
VIDEO  
(DIGITAL)  
AUDIO  
(DIGITAL)  
HDMI Cable  
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to  
the DIGITAL-IN on the back of your television.  
Notes:  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
DIGITAL. See "DIGITAL-IN AUDIO", page 52.  
• Some decoders may not respond depending on the equipment that you have connected  
when it is connected to the HDMI.  
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to  
480p/60Hz), the screen may turn green and there may be some distortion for a short time  
until the signal becomes stable.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an AV Receiver using your television's  
V1 Smart Input  
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture  
sources from many different devices, without having to change or use the other input  
connections on your TV. This allows you to free up the other input connections so you can  
connect more devices to your television.  
AV Receiver  
MONITOR  
Y
OUT  
R
MONOR OUT  
TV Rear Panel  
AUDIO  
OUT  
AUDIO  
VIDEO  
S-VIDEO  
COMPONENT VIDEO  
R
L
Y
Pb  
Pr  
75Ω  
(VHF/UHF)  
INPUT-3  
R
L
INPUT-2  
INPUT-1  
OV
OVER  
OPTICAL OUT  
Digital  
Audio  
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1  
on the back of your television.  
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO  
INPUT-1 on the back of your television.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-1 on the back of your television.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb  
VIDEO INPUT-1 on the back of your television.  
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr  
VIDEO INPUT-1 on the back of your television.  
Note:  
• Please refer to your AV Receiver instruction manual for more information on connecting your  
speakers and other devices like a DVD player.  
• Use your AV Receiver's remote to switch to the different devices you have connected.  
• Some AV Receivers may not respond when the V1 Smart Input function is turned on.  
• If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the  
S-Video connection.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “AUTO” or “MANUAL” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Notes:  
• The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case use the onscreen menus to perform these settings. See pages 45, 56 and 33.  
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: English, French (Français) or Spanish (Español).  
®  
To choose a language:  
(English, Français or Español)  
LANGUAGE/LANGUE/IDIOMA  
ENGLISH  
To NEXT (To set clock)  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
(To be continued...)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may  
precisely set your clock using the XDS time signal broadcast by most public analog  
broadcasting stations. If you do not have this in your area, you will have to set the clock  
manually. See manual clock set below. To set the clock using the XDS signal:  
®  
To choose AUTO  
To TIME ZONE  
SET CLOCK  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
MODE  
AUTO  
--: ----  
TIME  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
®  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
To NEXT (To Auto Tuner Setup)  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically  
adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00  
am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last  
Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
®  
To choose MANUAL  
To TIME  
SET CLOCK  
®  
To set the hour  
To minute  
MODE  
MANUAL  
®  
To set the minute  
To TIME ZONE  
TIME  
--: ----  
ATLANTIC  
ON  
TIME ZONE  
D.S.T.  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
START CLOCK  
SELECT OPERATE  
®  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
To START CLOCK  
MENU  
EXIT  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
®  
To choose CABLE or AIR (or SKIP when you  
skip AUTO TUNER SETUP)  
AUTO TUNER SETUP  
TUNER MODE  
AIR  
To START  
After Analog Auto Tuner Setup is finished, Digital Auto  
Tuner Setup starts.  
START  
SELECT OPERATE  
MENU  
EXIT  
NOW  
PROGRAMMING !  
Now Programming...  
20  
48  
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• If you want to cancel the Auto Tuner Setup, press the MENU button.  
• Noise muting will not work during Auto Tuner Setup.  
• If you choose SKIP, it finished without doing the Auto Tuner Setup.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
The Quick Setup is complete  
STOP  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Setting the CATV, VCR and DVD Codes  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond  
to any of the codes listed below or to the code search function, use the remote control  
supplied by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to “CATV”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
• If your cable or satellite box does not respond to the first code, try the others listed. If it does  
not respond to any code, try the search codes function, on page 29.  
Cable Box  
ABC  
CODES  
024  
Cable Box  
Puser  
CODES  
032  
Digital  
Satellite  
Systems  
CODES  
Archer  
032, 025  
051, 032  
022, 051  
058, 059  
024, 032, 025  
029  
RCA  
061, 070  
032  
Echostar  
100, 113, 114,  
115  
Cableview  
Citizen  
Realistic  
Regal  
058, 064, 040,  
041, 042, 045,  
068  
Express VU  
G.E.  
100, 113  
Curtis  
106  
Diamond  
Eagle  
Regency  
034  
G.I.  
108  
Rembrandt  
037, 032, 051,  
038  
Gradiente  
Hitachi  
112  
Eastern  
GC Brand  
Gemini  
034  
032, 051  
022, 043  
104, 111  
Samsung  
051  
HNS (Hughes)  
Scientific Atlanta 057, 058, 059  
104  
General Instrument 065, 024, 025,  
026, 027, 020,  
SLMark  
051, 047  
051, 056  
032, 051  
Panasonic  
Philips  
105  
Sprucer  
Stargate  
102, 103  
021, 022, 057,  
023  
040, 041, 042,  
045, 058, 064  
049, 024  
Primestar  
108  
Hamlin  
Telecaption  
Teleview  
Texscan  
Tocom  
067  
Proscan  
RCA  
106, 109, 110  
106, 109, 110  
Hitachi  
Jerrold  
047, 051  
044  
065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
023  
Sony  
107  
035, 036, 066  
050  
Star Choice  
104, 108  
Toshiba  
Unika  
Toshiba  
Uniden  
101  
Macom  
049, 050, 051,  
054  
102, 103  
032, 025  
Universal  
Videoway  
Viewstar  
Zenith  
022, 032  
052  
Magnavox  
033  
030  
Memorex  
Movietime  
029, 030  
063, 046  
046  
032, 051  
039, 037, 048  
Oak  
Panasonic  
055, 056, 060,  
071, 073  
Zenith/Drake  
Satellite  
Paragon  
Philips  
063  
028, 029, 030,  
052, 053, 031,  
069  
Pioneer  
Pulsar  
047, 062  
051, 032  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
• If your VCR does not respond to the first code, try the others listed. If it does not respond to  
any of the codes, try the search codes function on page 29.  
• After you program your remote, some VCR buttons may not work properly. If so, use the  
VCR’s remote.  
To record, hold down the REC button on the remote and press PLAY.  
VCRs  
CODES  
035  
027, 032, 095  
VCRs  
CODES  
VCRs  
CODES  
Admiral  
Aiwa  
Marantz  
Marta  
003, 004, 005  
064  
Samsung  
037, 060, 062,  
033, 089  
Samtron  
Sansui  
089  
Akai  
029, 072, 073, Memorex  
024, 067  
003, 026, 020,  
052  
074  
038, 040, 047,  
048, 041, 042  
MGA  
Audio Dynamic 003, 005  
Sanyo  
Scott  
063, 067, 091,  
071  
Bell & Howell  
Broksonic  
Canon  
063, 071  
020, 026, 094  
023, 025  
043  
Minolta  
058, 045, 093  
Mitsubishi  
038, 040, 047,  
048, 041, 042,  
078, 090  
059, 060, 062,  
067, 038, 040,  
047, 048, 026,  
020  
CCE  
Multitech  
NEC  
047, 027, 062  
Citizen  
064  
003, 004, 005,  
000  
024, 023  
Sears  
063, 064, 065,  
066, 058, 000,  
001  
Craig  
063, 029, 064  
Curtis Mathes  
045, 024, 027,  
093  
Olympic  
Shintom  
Sharp  
075  
Optimus  
028, 021, 035,  
064  
026, 020  
Daewoo  
043, 059, 024,  
092  
003, 004, 005  
035, 036, 080,  
088  
Orion  
DBX  
Panasonic  
023, 024, 021,  
022  
Signature 2000 027, 035  
Dimensia  
Emerson  
045, 093  
Singer  
Sony  
075  
043, 026, 077,  
061, 025, 042,  
020, 076  
Penney  
024, 058, 045,  
063, 003, 004,  
005, 093  
028, 029, 030,  
053, 054, 055  
SV 2000  
Sylvania  
027  
Fisher  
Funai  
063, 066, 067,  
065, 071, 091  
Pentax  
Philco  
058, 005, 045,  
093  
031, 023, 024,  
027  
027, 026, 020,  
000  
031, 024, 027,  
023, 026, 020,  
043  
Symphonic  
Tashiro  
Tatung  
027, 081  
064  
033, 045, 024  
G.E.  
Philips  
031, 023, 024,  
086  
003, 004, 005  
Go Video  
037, 051, 049,  
050, 089  
Teac  
003, 004, 027,  
005  
Pioneer  
Proscan  
023  
Goldstar  
064  
045, 058, 023,  
024, 031, 046,  
059, 060, 033,  
087, 093  
Technics  
021, 022, 023,  
024  
Gradiente  
083, 084, 081,  
000, 001  
Teknika  
Toshiba  
024, 027, 070  
059, 046, 079  
Hitachi  
023, 045, 058,  
027, 081, 093  
Quasar  
021, 022, 023,  
024  
Vector Research 005  
Instant Replay 024, 023  
Wards  
Yamaha  
Zenith  
035, 036, 067,  
044, 064  
Radio Shack  
033, 024, 063,  
036, 067, 040,  
027  
Jensen  
JVC  
003  
000, 001, 002,  
003, 004, 005  
063, 003, 004,  
005  
033, 045, 058,  
023, 024, 031,  
046, 059, 060,  
083, 084, 085,  
087, 093  
RCA  
Kenwood  
LXI  
003, 004, 064,  
005  
044, 082, 064,  
094  
027, 064, 058,  
065, 066, 063,  
067  
Realistic  
024, 063, 036,  
067, 040, 027  
Magnavox  
031, 023, 024,  
086  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
• If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 29.  
• After you program your remote, some DVD buttons may not work properly. If so, use the  
DVD player’s remote.  
DVD Player  
Aiwa  
CODES  
043  
DVD Player  
RCA  
CODES  
021, 026  
Apex  
040  
Sampo  
Samsung  
Sharp  
034  
030  
028  
038  
Denon  
Hitachi  
JVC  
020, 037  
030, 031  
000  
Silvania  
Sony  
Kenwood  
Konka  
035  
024, 045, 046,  
047  
039  
Mitsubishi  
Onkyo  
Oritron  
Panasonic  
Philips  
Pioneer  
Raite  
025  
Technics  
Toshiba  
Vialta  
020  
041  
023  
044  
050  
020  
Wave  
042  
023, 036  
022  
Yamaha  
Zenith  
020  
027, 032  
033  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.  
3) Press the POWER button on the remote, and see if the cable or satellite box responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use  
the remote control that came with your equipment.  
5) Press RETURN+/TV to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or  
“DVD”.  
2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds  
and release.  
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
5) Press RETURN+/TV to exit.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–  
buttons let you:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
• Scan through TV channels (when not in a menu screen)  
® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right  
to:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
• Turn the volume up or down (when not in a menu screen)  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item that  
appears in green is the one currently selected. If you use the Menu button on the TV’s front  
panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and  
ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in  
menu” will appear the first time the TV is plugged in.  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
SET LOCK CODE  
CONVERGENCE  
NEXT PAGE  
(4/5)  
EXIT  
MENU  
SELECT OPERATE  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. Examples of the onscreen  
menus are shown on the next page. Detailed explanations on using each menu follow later in  
this guide. For information about the interactive plug-in Menu, see pages 23 - 25.  
The Onscreen Menu System  
To open the onscreen menu system, press the MENU button on the remote control. You  
navigate within the onscreen menus by using the four directional arrow buttons on the remote  
control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions  
will not operate when the onscreen menu is active).  
The selected feature and option on a menu screen are highlighted in a different color.  
Selected Option  
(Green)  
ENG. FRAN. ESP.  
LANGUAGE  
Selected Option  
(Blue)  
CLOSED CAPTION  
To move to a different feature use the πarrows to move up or down the list. When you  
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen  
will appear. Use the arrows ® to select an option from the highlighted feature. Pressing  
MENU on the remote control will close the onscreen menu system and return you to normal  
television viewing.  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
TO INITIAL SETUP 03  
INITIAL SETUP  
/
INITIAL SETUP  
CLOCK TIMERS  
PREVIOUS  
SET CLOCK  
PREVIOUS  
PREVIOUS  
DIGITAL-IN  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
AUTO  
DIGITAL-IN AUDIO  
DIGITAL  
/
ON OFF TIMER  
SET LOCK CODE  
CONVERGENCE  
NEXT PAGE  
(4/5)  
EXIT  
NEXT PAGE  
NEXT PAGE  
(1/5)  
MENU  
MENU  
MENU  
SELECT OPERATE  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
CLOCK/TIMERS  
INITIAL SETUP 01  
INITIAL SETUP 04  
INITIAL SETUP  
INITIAL SETUP  
SOUND ADJUST  
PREVIOUS  
PREVIOUS  
PREVIOUS  
DIGITAL SETUP  
NOISE MUTING  
ON  
OFF  
ON  
BASS  
00  
00  
00  
FRONT PANEL LOCK  
V1 SMART INPUT  
TREBLE  
BALANCE  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
OFF  
(2/5)  
RESET  
NEXT PAGE  
(5/5)  
NEXT PAGE  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
INITIAL SETUP 05  
SOUND ADJUST  
INITIAL SETUP 02  
INITIAL SETUP  
ENG. FRAN. ESP.  
PICTURE ADJUST  
PICTURE ADJUST  
PREVIOUS  
PREVIOUS  
LANGUAGE  
STANDARD  
PREVIOUS  
STANDARD  
TINT  
DIG. NOISE CLEAR  
NATURAL CINEMA  
VSM  
OFF  
00  
00  
00  
00  
00  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
AUTO  
ON  
OFF  
ON  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
RESET  
(1/2)  
EXIT  
NEXT PAGE  
(2/2)  
NEXT PAGE  
(3/5)  
MENU  
MENU  
SELECT OPERATE  
SELECT OPERATE  
EXIT  
MENU  
SELECT OPERATE  
EXIT  
PICTURE ADJUST 02  
INITIAL SETUP 03  
PICTURE ADJUST 01  
TO INITIAL SETUP 04  
Notes:  
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
digital-in terminal and the picture is being displayed on the screen.  
• When the Menu button on the TV front panel is pressed, the FRONT PANEL CONTROL  
menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.  
• Regarding the digital setup menu, see page 67.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
AUTO TUNER SETUP  
π†  
®  
®  
To AUTO TUNER SETUP  
To operate  
TUNER MODE  
AIR  
To choose CABLE or AIR  
Press the OK button to start  
PRESS OK TO START  
SELECT OPERATE  
MENU  
EXIT  
Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the  
message PROGRAMMING OVER! appears onscreen.  
Press the Menu button when finished  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV.  
Regarding analog channels, you can add or delete channels from the line-up or prevent any  
unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the  
only channels that will appear are the ones that are broadcasting.  
Press the MENU button  
To CHANNEL SUMMARY  
To operate  
Analog Channels  
CHANNEL SUMMARY  
π†  
CHNO. SCAN  
ID  
CHNO. SCAN  
ID  
®  
01  
06  
HBO  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. Regarding  
analog channels, you can delete channels from the scan  
by removing the “”. If any channels were missed during  
auto tuner setup and you wish to add them, you may by  
placing an “” next to the channel number.  
02  
03  
04  
05  
MTV  
07  
08  
09  
10  
L
A&E  
E!  
OK  
MENU  
SELECT  
OPERATE  
EXIT  
Digital Channels  
• Digital channels can not be added to the channel  
summary if the auto tuner setup did not find them.  
Channel Summary Digital  
CH No.  
D01  
Scan  
Station Name  
FOX  
π® To the SCAN column  
Press the OK button to include or delete from  
scan  
D02  
ABC  
D02  
CNN  
D10-1  
D10-2  
D12345  
NBC  
BOX  
Press the MENU button when finished  
NHK  
BACK  
MENU  
Operate  
Back  
Exit  
Note:  
• The number of a digital channel may change,  
depending on the time of some broadcastings. If  
this channel existed and now had disappeared, the  
lock channel or scanned channel by the channel  
summary for that channel will be cancelled.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
How to set the channel label. (This is only for analog broadcasting.)  
Press the MENU button  
ID  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the ID column  
CHANNEL 09  
RESET  
Press the OK button to enter  
OK  
PRESS TO FINISH  
®  
π†  
To select the character you want  
To move to the next space  
MENU  
SELECT OPERATE  
EXIT  
...continue to follow these directions for all four  
spaces  
Press the OK button to finish  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the ID column  
Press the OK button to enter  
To select RESET  
π†  
Press the OK button to finish  
Your characters are now reset  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 40 channel labels.  
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will  
appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
To CHANNEL SUMMARY  
To operate  
®  
π® To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the MENU button when finished  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
THIS CHANNEL IS LOCKED BY  
CHANNEL GUARD.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
Lock Code using the 10 key pad.  
If the wrong code is entered, the message  
“INVALID LOCK CODE!” will flash on the screen.  
The channel cannot be accessed until the correct code  
is entered.  
NO. - - - -  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 42.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from DVD discs or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 37 for information on  
how to block unrated programs.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings and movie ratings. You may use any or all of the settings (US  
V-Chip and Movie ratings). Descriptions for setting each of the three V-Chip formats appear in  
the next five pages along with descriptions of the rating categories.  
To access the rating categories:  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (Lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
will appear)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
To turn V-Chip ON or OFF (V-Chip must be  
turned ON for rating settings to operate)  
π†  
To move to SET US TV RATINGS or  
SET MOVIE RATINGS. (see following pages  
for descriptions of each item)  
MENU  
SELECT OPERATE  
EXIT  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
V-CHIP  
OFF  
V-CHIP  
π†  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
®  
To operate (The lock icon  
appears)  
Press ZERO to access V-Chip setup options  
VIEW  
π†  
To UNRATED  
®  
To VIEW or BLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press MENU when done  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
appears)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
π†  
®  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
To operate  
MENU  
SELECT OPERATE  
EXIT  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
SET US TV RATINGS  
π® To the TV 14 Column  
TV  
TV  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
Press the OK button to lock  
MA 14  
Press the MENU button when finished  
V/FV  
S
L
Note:  
D
• If you want to change the setup, move the cursor to  
the top column and change the lock icon to “—” by  
pressing OK again. You may then select individual  
categories to block.  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (Lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET MOVIE RATINGS  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
SET MOVIE RATINGS  
π® To the X Column  
Press the OK button to lock  
π® To the NC-17 Column  
Press the OK button to lock  
Press the MENU button to finish  
N
P
C17  
R
G13  
PG  
G
X
NR  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
For example:  
To block viewing of programming rated 14+ and  
18+:  
SET CANADIAN RATINGS ENG  
®  
To the 18+ Column  
Press the OK button to lock  
P
C
8
G
C
18+  
14+  
G
®  
To the 14+ Column  
Press the OK button to lock  
Press the MENU button to finish  
MENU  
OK  
EXIT  
SELECT  
OPERATE  
Note:  
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 41 in the  
French side of this user’s guide.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
To change the lock code, follow the steps below.  
Press the MENU button  
SET LOCK CODE  
π†  
To SET LOCK CODE  
To operate (lock icon  
LOCK CODE  
0000  
®  
appears)  
Press ZERO to access the lock code  
The first digit will be highlighted  
OK  
PRESS  
TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
®  
π†  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
Press the OK button to finish (your lock code is now set)  
Press the Menu button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Adjusting CRT Color Convergence  
This TV has three color projection tubes: one for red, green, and blue. When mixed together  
in the proper portions, the output of these three color tubes can produce any color. To produce  
these colors, however, the beams must be precisely aligned over each other so that the colors  
can be mixed. The produce of aligning these picture beams is called “convergence”.  
Attention:  
• Please have your TV on for at least 20 minutes before using this feature.  
• This adjustment will be needed only when the colors of the characters/lines are separated  
and lack in distinction. If not, please don’t perform the adjustment.  
Colors may become separated after the TV has been moved, or  
CONVERGENCE  
over a long period of time if regularly subjected to low levels of  
AUTO  
vibrations. If the colors become separated, please perform the  
MANUAL  
adjustments below again. In the beginning, please be sure to  
perform AUTO convergence adjustment.  
RESET  
Auto  
MENU  
EXIT  
SELECT  
OPERATE  
Press the MENU button  
πTo CONVERGENCE  
®  
π†  
To Enter  
To select “AUTO” (The convergence adjustment will  
start. It will take about 50 seconds).  
When the adjustment is finished, it will return to what you  
were watching.  
SUPER FOCUS  
Note:  
You can reset the adjustment if you do not like the results. See the next page.  
• If you want to adjust it more, you can perform the manual color convergence adjustment.  
See the next page.  
You can also access this feature by pressing the SUPER FOCUS button on the front panel of  
your TV.  
INPUT- 4  
S-VIDEO VIDEO  
AUDIO  
MONO  
OVER  
L
/
R
MENU  
CHANNEL  
VOLUME  
SUPER  
FOCUS  
+
+
OPERATE  
OPEN  
SUPER  
FOCUS  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Adjusting CRT Color Convergence (continued...)  
Manual  
Press the MENU button  
πTo CONVERGENCE  
®  
πTo choose MANUAL  
® To Enter  
To Enter  
If all the lines are white, no convergence adjustment is  
necessary. If not, you need to perform the manual color  
convergence below.  
2
5
8
Select the location you want to adjust by using the  
number buttons on the remote control.  
You can select any of the 81 points.  
4
6
Press the SLEEP TIMER button to change the color of the  
box  
to the color of the cross you wish to adjust (red or blue).  
π® Adjust the position of the cross.  
Adjust the three color crosses until they overlap and appear as a single white  
cross.  
Press the OK button  
Notes:  
• When you adjust the convergence, make sure you start with the center position (position 5),  
and work your way around radially for best results.  
• When you make the adjustment in the center (position 5), you are making the adjustment for  
the whole screen. In other positions, you are making the adjustment only in that area.  
You can reset the adjustment if you do not like the results. See below.  
• If you perform AUTO convergence after performing MANUAL convergence, your manual  
convergence you performed will be cancelled.  
Reset  
RESET resets all convergence adjustments to the factory default settings.  
Press the MENU button  
πTo CONVERGENCE  
®  
To Enter  
πTo RESET  
®  
To enter  
When the adjustment is reset, it will return to what you were watching.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Language  
The language function is described on page 23 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the Menu button  
INITIAL SETUP  
PREVIOUS  
π†  
To LANGUAGE  
LANGUAGE  
ENG. FRAN. ESP.  
®  
To choose a language: ENG. (English),  
FRAN. (French) or ESP. (Spanish)  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below. There are three methods. When you are watching  
analog channels, you can perform Analog Setting of closed caption. When you are watching  
digital channels, you can perform Digital Auto Setting or Digital Manual Setting.  
Analog Setting  
Press the MENU button  
CLOSED CAPTION  
π†  
®  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
To MODE  
To select CAPTION or TEXT in MODE  
To CAPTION or TEXT  
To select a caption (CC1 to CC4) or text  
channel (T1 to T4)  
MODE  
TEXT  
CC1  
T1  
CAPTION  
TEXT  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
Press the MENU button when finished  
Digital Auto Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
To Type  
Closed Caption Sample  
Type  
AUTO  
1
Service  
Appearance  
To select Auto, Advanced or Basic  
Auto: Shows closed caption a priority for  
digital channels over analog channels. It is  
set automatically.  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Advanced: Shows only the digital closed  
caption.  
Basic: Shows only the analog closed  
caption.  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Appearance Mode  
Auto  
π†  
®  
π†  
®  
®  
π†  
To Service  
Font  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Auto  
To Set  
Colors  
Opacities  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button to save  
The font/type and color are set automatically.  
Press the MENU button when finished  
Note:  
• If you want to cancel the settings, select cancel.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital Manual Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
>
Appearance  
π†  
To CLOSED CAPTION  
Closed Caption Sample  
®  
π†  
®  
π†  
®  
π†  
®  
®  
π†  
®  
π†  
®  
To enter  
To Type  
Appearance Mode  
Manual  
Font  
Colors  
Opacities  
To select Auto, Advanced or Basic  
To Service  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Manual  
To Font  
To enter  
To select Font Size or Font Style  
To select the setting you like  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Font Size  
Standard  
Auto  
Appearance Mo
Font  
Font Style  
Colors  
Font Size: Auto, Standard, Large or Small  
Cancel  
Set  
Opacities  
Cancel  
Font Style: Auto, Serif Mono, Serif, Sanserif mono,  
Sanserif, Casual, Cursive or Small Capital  
π†  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
To Set  
Press the OK button to save  
π†  
®  
π†  
®  
To Colors  
To enter  
To select Text, Edge or Background  
To select the setting you like  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Text  
Appearance Mo
White  
White  
Black  
Edge  
Auto, White, Black, Red, Green, Blue,  
Yellow, Magenta or Cyan  
Font  
Background  
Cancel  
Colors  
Opacities  
Set  
π†  
To Set  
Cancel  
Set  
BACK  
MENU  
Press the OK button to save  
Select  
Operate  
Back  
Exit  
π†  
®  
π†  
®  
To Opacities  
To enter  
To select Text/Edge or Background  
To select Auto, Transparent, Translucent, Solid  
or Flashing  
To Set  
All fonts used for digital closed  
caption and digital menus are  
licensed from Monotype Imaging  
Inc.  
π†  
Press the OK button to save  
Press the MENU button when finished  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 62.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To AUTO SHUT OFF  
To turn ON or OFF  
LANGUAGE  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text  
“NOT RECEIVING A SIGNAL AUTO SHUT OFF  
IN 9 MIN.” appears on the screen, and starts the  
countdown. If no signal is being received within 10  
minutes, the TV shuts itself off.  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
XDS ID  
XDS ID Display provides a channel’s call letters, the network’s name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
LANGUAGE  
ENG. FRAN. ESP.  
π†  
®  
To XDS ID  
To turn ON or OFF  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
Noise Muting  
This feature inserts a blank gray screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To NOISE MUTING  
To turn noise muting ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Press the MENU button when finished  
OFF  
NEXT PAGE  
(2/5)  
MENU  
Notes:  
SELECT OPERATE  
EXIT  
• Noise muting will not work during auto tuner setup or  
when you operate channel summary.  
• Noise muting will not work when the digital TV is displayed.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To FRONT PANEL LOCK  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
You can turn off this feature in the following ways:  
OFF  
NEXT PAGE  
(2/5)  
• Unplug the power cord, and plug it back in. Do this if  
your batteries die, or you lose your remote control.  
MENU  
SELECT OPERATE  
EXIT  
• Use the remote control.  
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will  
remain ON.  
V1 Smart Input  
This feature is used if you have connected an AV Receiver to your television. By turning this  
feature on, your television can automatically detect the signal source from your components  
that are connected to your AV Receiver.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To V1 SMART INPUT  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Notes:  
OFF  
NEXT PAGE  
(2/5)  
• If you do not have an AV Receiver connected to your  
television, turn this feature OFF.  
MENU  
SELECT OPERATE  
EXIT  
• Some AV Receivers may not work with this function.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
π†  
®  
To VIDEO INPUT LABEL  
To enter  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
To select the desired video input  
OFF  
To select the desired preset input label (see  
chart below)  
NEXT PAGE  
(2/5)  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
VIDEO INPUT LABEL  
Press the MENU button when finished  
VCR  
VIDEO-1  
VIDEO-2  
VIDEO-3  
VIDEO-4  
DIGITAL-IN  
DVD  
SAT  
GAME  
STB  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Preset  
Labels  
Select when...  
You have a VCR connected to the video input  
You have a DVD connected to the video input  
VCR  
DVD  
DVHS  
STB  
You have a Digital VCR connected to the video input  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
You have a Video Game connected to the video input  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
SAT  
AMP  
GAME  
CAM  
DISC  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama, cinema or full.  
Press the MENU button  
π†  
®  
To POSITION ADJUSTMENT  
To enter  
π® To adjust the position  
Press the MENU button to finish  
Notes:  
OK  
MENU  
RESET  
EXIT  
OPERATE  
To reset the adjustment to the center, press the  
OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at its  
maximum limit.  
• If you select regular size with aspect, position adjustment option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.  
Power Indicator  
Power indicator allows you to adjust the brightness of the power indicator  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
NOISE MUTING  
ON  
OFF  
ON  
πTo POWER INDICATOR  
FRONT PANEL LOCK  
V1 SMART INPUT  
®  
To adjust POWER INDICATOR LOW, HIGH  
or OFF  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Notes :  
OFF  
NEXT PAGE  
(2/5)  
• If you set a timer on the TV, the power indicator will  
light even if the TV is on stand by.  
MENU  
SELECT OPERATE  
EXIT  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital-In  
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p  
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when  
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of  
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the  
position can be adjusted by selecting either SIZE1 or SIZE2.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
π†  
To DIGITAL-IN  
DIGITAL-IN  
AUTO  
DIGITAL-IN AUDIO  
DIGITAL  
To enter  
To select AUTO, SIZE1 or SIZE2  
Press the MENU button to finish  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• The DIGITAL-IN menu can only be displayed when a HDMI or 480p picture signal is input to  
the Digital-In terminal and the picture is being displayed on the screen.  
You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the  
televison will select "SIZE1" or "SIZE2" automatically.  
Digital-In Audio  
This feature is used if you have a DTV or HDMI compatible component connected to your TV.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To DIGITAL-IN AUDIO  
To select ANALOG, DIGITAL or AUTO  
DIGITAL-IN  
AUTO  
DIGITAL-IN AUDIO  
DIGITAL  
Press the Menu button when nished  
NEXT PAGE  
(1/5)  
Notes:  
MENU  
SELECT OPERATE  
EXIT  
• If your DTV or HDMI component is capable of digital  
audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog  
audio and digital video, choose ANALOG.  
• Refer to your DTV or HDMI component’s instruction manual for more information.  
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,  
depending on the audio input from the HDMI.  
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page  
68.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Adjust the Picture Settings  
Press the MENU button  
PICTURE ADJUST  
π†  
To TINT, COLOR, PICTURE, BRIGHT or  
DETAIL  
To enter  
PREVIOUS  
TINT  
STANDARD  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
®  
+02  
TINT  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
(1/2)  
EXIT  
®  
π†  
To adjust the setting  
To move to the next setting  
MENU  
SELECT OPERATE  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
TINT  
STANDARD  
π†  
®  
To COLOR TEMPERATURE  
To enter  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
COLOR TEMPERATURE LOW HIGH  
®  
To set LOW or HIGH  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
Press the MENU button when finished  
(1/2)  
EXIT  
MENU  
SELECT OPERATE  
Digital Noise Clear  
With digital noise clear, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
DIG. NOISE CLEAR  
OFF  
LOW  
HIGH  
π†  
®  
π†  
To DIG. NOISE CLEAR  
To enter  
To select the mode LOW, HIGH or OFF  
Press the MENU button when finished  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, press NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
Press the NATURAL CINEMA button  
NATURAL CINEMA  
π†  
®  
π†  
To NATURAL CINEMA  
To enter  
To select the mode “AUTO", "ON" or "OFF”  
AUTO  
ON  
OFF  
Press the MENU button when finished  
Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:  
• Turning on or off  
• Changing the channel or input mode  
(VSM) Velocity Scan Modulation  
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help  
accentuate the differences in picture brightness to sharpen the edges of images.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
OFF  
π†  
®  
To VSM  
To enter  
DIG. NOISE CLEAR  
NATURAL CINEMA  
VSM  
ON  
ON  
VSM  
ON OFF  
RESET  
®  
To turn VSM ON or OFF  
NEXT PAGE  
(2/2)  
MENU  
SELECT OPERATE  
EXIT  
Reset  
Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature et dig.  
noise clear) at once to the default settings.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
π†  
®  
To RESET  
To enter  
DIG. NOISE CLEAR  
NATURAL CINEMA  
VSM  
OFF  
ON  
ON  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments.  
RESET  
NEXT PAGE  
(2/2)  
Press the MENU button when finished  
MENU  
SELECT OPERATE  
EXIT  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
SOUND ADJUST  
PREVIOUS  
π†  
®  
π†  
To BASS, TREBLE or BALANCE  
To adjust the setting  
To move to the next setting  
BASS  
00  
00  
00  
TREBLE  
BALANCE  
Press the MENU button when finished  
RESET  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
Note:  
You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as  
the default setting when you select reset. See page 54.  
You can adjust BALANCE only when HYPER SURROUND. is off. See page 59.  
Reset  
Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.  
See page 54 on how to use reset.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 24 as the interactive plug-in menu. You can choose  
to set the clock automatically or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
®  
To SET CLOCK  
To enter  
When you set the clock automatically, choose AUTO by pressing the  
or  
®
arrows.  
π†  
®  
To TIME ZONE  
To select your time zone  
SET CLOCK  
ATLANTIC  
CENTRAL  
EASTERN  
HAWAII  
MOUNTAIN  
ALASKA  
PACIFIC  
MODE  
AUTO  
--: ----  
π†  
®  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
TIME  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
Press OK to finish  
OK  
PRESS TO FINISH  
Press the MENU button when finished  
MENU  
SELECT OPERATE  
EXIT  
When you set the clock manually, choose MANUAL by  
pressing the or arrows.  
®
π†  
®  
π†  
®  
π†  
®  
To move to the hours  
To set the hours  
To move to minutes  
To set the minutes  
To TIME ZONE  
To select your time zone:  
SET CLOCK  
(Atlantic, Eastern, Central, Mountain, Pacific,  
Alaska or Hawaii)  
MODE  
MANUAL  
--: ----  
π†  
To D.S.T. (daylight savings time)  
TIME  
®  
To turn D.S.T. ON or OFF  
Press OK to start clock  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
THANK YOU !!  
OK  
PRESS TO START CLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press the MENU button when finished  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts  
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on  
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in  
October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Press the MENU button  
ON/OFF TIMER  
7:00 PM  
10:00 PM  
03  
ON TIME  
π†  
®  
®  
To ON/OFF TIMER  
OFF TIME  
CHANNEL  
ON VOLUME  
MODE  
To enter (begins with ON TIME)  
CURRENT  
EVERYDAY  
NO  
To set the hour (AM/PM) you want the TV to  
turn on  
ON/OFF TIMER  
®  
To move to minutes  
To set the minutes  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the  
OFF TIME the same way as ON TIME  
®  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
®  
To set the volume level  
To move to MODE  
®  
Choose ONCE or EVERYDAY  
To ON/OFF TIMER  
®  
Choose YES to accept the timer setting, choose NO if you don’t wish to accept  
Press the OK button to finish  
Press the MENU button to exit the menu  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
0 (Zero)  
1 (One)  
2 (Two)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (One)  
2 (Two)  
Press the TUNE button  
Input  
Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGIATL-IN for video  
devices like VCRs, DVD players, or camcorders.  
Press the INPUT button  
By every press of the INPUT button, you can change the input mode.  
Notes:  
• When you return to TV mode, press the RETURN + button or direct 10 key pad.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
INPUT by pressing MENU  
on the front panel and choose a mode by using the CHANNEL +/-  
buttons ( OPERATE ).  
®
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +/TV  
The RETURN+/TV button has three functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
TV - Returns to the TV mode.  
Press the RETURN+/TV and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED!  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/– buttons.  
Press the RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The  
message “RETURN CHANNEL CANCELLED!” will appear.  
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel  
return+.  
Sound  
By pressing the SOUND button, you can change the Hyper Surround mode and SMART  
SOUND on or off.  
HYPER SURROUND - Creates a deep, three-dimensional sound effect by channeling the  
audio through the TV’s front-firing speakers..  
SMART SOUND - Decreases high sound levels, giving a regulated sound level.  
Press the SOUND button  
SOUND EFFECT  
π†  
®  
To select HYPER SURROUND or SMART SOUND  
To choose the setting  
HYPER SURROUND  
SMART SOUND  
ON OFF  
ON OFF  
Press the MENU when finished  
MENU  
OPERATE  
EXIT  
SELECT  
Note: Smart Sound may become an unnatural effect, depending on the signal source.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Video Status  
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the factory settings.  
VIDEO STATUS  
Dynamic - Gives a vivid picture with better contrast when viewing in  
STANDARD  
a brightly lit room.  
DYNAMIC  
Theater - Gives a rich, film-like look to video when viewing in a  
THEATER  
dimly lit room.  
GAME  
Game - Used for when you are playing video games connected to  
your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the side of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
VIDEO STATUS by pressing MENU  
®
on the side panel and choose a mode by using the  
).  
CHANNEL +/- buttons ( OPERATE  
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the film  
to video editors intended it to be.  
Press the THEATERPRO button  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals  
of 15 minutes, for a total time of up to 180 minutes.  
Press the SLEEP button  
0 15 30 45 60 75 90 105 120 135 150 165 180  
Sleep Timer Message  
60 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT!!  
PUSH SLEEP TIMER BUTTON  
TO EXTEND  
You then have 60 seconds to press the SLEEP button to  
delay the shut off for another 15 minutes.  
ML/MTS  
MTS technology allows several audio signals to be broadcast in analog at once, giving you a  
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
Press the ML/MTS button  
MTS  
By every press of the ML/MTS button, you change  
the mode  
ON AIR  
STEREO  
ON AIR  
SAP  
MONO  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described  
on page 58.  
• ML/MTS will not work when you are using the Digital-In and VIDEO 1 to 4.  
You can also change the mode by pressing the πbuttons.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Display  
The display screen shows the current status of timers, inputs and XDS ID.  
Press the DISPLAY button  
The screen to the right shows the following  
information:  
05 KLVX PBS  
JAZZ FESTIVAL  
• The current channel or AV input (Channel 05)  
• The current time (12:20 pm)  
• Sleep timer status/minutes remaining (The  
NOW  
12:20 PM  
OFF  
SLEEP TIMER  
ON/OFF TIMER  
EVERYDAY  
7:00 PM  
Sleep Timer is off)  
• On/off timer status (Set to turn on everyday at  
7:00 PM, off at 10:00 PM)  
ON TIME  
OFF TIME  
10:00 PM  
• Each Press of the DISPLAY button changes the  
display mode:  
Display  
Time  
Channel  
Off  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock, sleep timer or on/off timer are not set, the display screen will show:  
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
CLOSED CAPTION  
Notes:  
OFF  
SMART CAPTION  
ON  
• SMART CAPTION will appear when you press the MUTING button,  
only on channels where the broadcast contains closed captioning.  
• When you select ON, it will be the mode selected in the Closed  
Caption Menu.  
• See page 46 when you set the caption/text mode.  
You can also change the mode by pressing the πbuttons.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See how to register below.  
Press the FAVORITE button  
FAVORITE  
The favorite channel list will appear.  
PREVIOUS  
π†  
To select the channel you want to watch  
101  
102  
D103  
<
CBS  
FOX  
PBS2  
>
Press the OK button  
It will change to the channel you have selected.  
D107  
8
HBO  
ABC  
Register the favorite channel  
NEXT  
Press the channel number you want to register  
The channel program will change.  
Press the FAVORITE button for three seconds  
The channel will be registered in the favorite channel list.  
Notes:  
• Both analog and digital channels can be registered. The digital channels have a "D" in front  
of the channel number.  
• The maximum number of channels you can register is 24.  
• If you have registered the maximum number of channels, and try to register more channels,  
the oldest channel you registered will be deleted.  
• Sub channels can not be registered.  
• The newest channel you registered will appear at the top of the list.  
• Regarding digital channels, see page 69 - 70.  
Delete the favorite channel  
Press the FAVORITE button  
The favorite channel list will appear.  
π†  
®  
To select the channel you want to delete  
To enter  
Press the OK button  
The channel was deleted.  
Press the FAVORITE button when finished  
Note:  
• Before pressing the FAVORITE button when you are finished, press the ® button again, and  
you can return to the deleted channel.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while gray bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
CINEMA - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
SLIM - This aspect mode shrinks the  
screen of 16:9 to 4:3. There are some  
programming that is already stretched by  
mistake at broadcasting companies, so this  
mode corrects it. Gray side bars will appear.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
PANORAMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
CINEMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
ATSC (480i, 480p)  
NTSC, 480i, 480p  
HD (1080i, 720p)  
ATSC (1080i, 720p)  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
ASPECT  
PANORAMA  
CINEMA  
FULL  
SLIM  
REGULAR  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
ASPECT by pressing MENU  
on the front panel and choose a mode by using the CHANNEL  
+/- buttons (  
OPERATE  
®
).  
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p).  
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you  
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect  
mode after the televison changed it to FULL automatically, the televison will change to the  
aspect mode you choosed.  
Menu  
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
TV/CATV Slide Switch  
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to  
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
• See page 26 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 27.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 28.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and  
power off.  
Move the selector switch to VCR to operate.  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 27.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on, and power off.  
Move the selector switch to DVD to operate.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 28.  
Super Focus  
This button is only located on the front panel of your TV. When you press the SUPER FOCUS  
button on the front of the TV, you can access the auto convergence mode in the convergence  
menu screen automatically. See page 43.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Setup  
Digital Setup  
Use this function when you are receiving a digital broadcast.  
Press the MENU button  
Digital Setup  
Antenna Level  
π†  
To DIGITAL SETUP  
To enter  
Digital Sound  
PCM  
®  
Software Version  
The onscreen will appear  
Notes:  
Software Update  
• Software Update will only appear when the SD Card  
is inserted.  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
• If you are watching an analog channel, you can still  
access the digital setup menu at anytime, while you are doing this, the background screen  
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital  
setup menu.  
Antenna Level  
Confirms the present antenna level.  
Antenna Level  
Press the MENU button  
75  
π†  
To DIGITAL SETUP  
To enter  
BACK  
MENU  
®  
Back  
Exit  
π†  
To Antenna Level  
To enter  
®  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Setup  
Digital Sound  
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is  
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can  
enjoy listening in 5.1ch sound when watching digital broadcasts.  
Press the MENU button  
π†  
®  
To DIGITAL SETUP  
To enter  
π†  
To Digital Sound  
®  
To select PCM or DOLBY DIGITAL  
Press the MENU button when finished  
Notes:  
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it  
cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 19.  
Manufactured under license from Dolby Laboratories. "Dolby", and the  
double-D symbol are trademarks of Dolby Laboratories.  
Software Version  
You can confirm the Software Version.  
Press the MENU button  
π†  
®  
To DIGITAL SETUP  
To enter  
π†  
®  
®  
To Software Version  
To enter  
Select close when you are finished confirming your software version  
Press the MENU button when finished  
Software Update  
At first, insert the SD(Multi-media) card into the memory card slot. This function will appear  
only when you insert an SD Card.  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To DIGITAL SETUP  
To enter  
To Software Update  
To enter  
Checks the card if it needs an update or not  
Press the MENU button when finished  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Digital CH D/A (Digital/Analog)  
The D/A button changes the analog and digital channel. Each time you press the D/A button,  
you can switch back and forth the analog and digital channels. Digital channels have a "D" in  
front of the channel number.  
Press the D/A button  
To watch digital channels  
For example, to move to channel D23:  
Press 2 (Two)  
Press 3 (Three)  
Press the TUNE button  
Sub Channel  
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH  
button, you can select a sub channel easily.  
For example, to move to sub channel 123-45:  
Press 1 (One)  
Press 2 (Two)  
Press 3 (Three)  
Press the SUB CH button  
Press 4 (Four)  
Press 5 (Five)  
Press the TUNE button  
Note:  
• If there are more than 2 major channels, select the digital channel by using the πbuttons  
and then press the OK button.  
Guide  
You can view the program from the GUIDE.  
Notes:  
The GUIDE function will only work when you are receiving digital programming only.  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television. See page 56.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Information  
Weak Signal  
This OSD warning appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
Weak Signal  
15  
No Program  
If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"  
appears on the television screen. It appears when that channel is not receiving a signal and you  
have the Noise Muting function OFF and you have a single screen. It moves automatically every  
two seconds to prevent the screen from burn-in. See page 6.  
Note:  
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off  
functions that you set, are still active.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
CHECK  
PROBLEMS  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
There is no picture  
or sound  
• The antenna could be disconnected.  
• The input mode could be set improperly. See page 50.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 33.  
• The TV station may be having difficulties. Check to see if other stations are working.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• Check that the TV/CATV switch is in the proper position.  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 34.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 35.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 57.  
• Check to see if the Sleep Timer was set. See page 61.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 56.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 53.  
• The Video Status mode may be turned to the wrong setting. See page 67.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 40% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 46.  
• Make sure the MTS settings are correct. See page 61.  
Stereo or bilingual  
programs can't be  
heard  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The square appears  
and blinking  
• It appears when you are operating the Auto Convergence. If not, then this may  
be a problem with the Auto Convergence. Contact a service agent.  
It does not operate  
correctly  
• Press the CHANNEL- and VOLUME- buttons on the front panel of the TV simultaneously  
for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug  
the power cord and plug it back in.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AV-48P776  
AV-56P776  
AV-56P786  
Model  
AV-48P786  
Type  
Rear Projection Television  
NTSC, BTSC System (Multi-Channel Sound)  
ATSC Terrestrial, Digital Cable  
Reception Format  
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper  
and Ultra bands (181 channel frequency synthesizer system)  
Reception Range  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
259W  
Power Consumption  
48 inch / 122 cm  
measured diagonally,  
16:9 ratio  
56 inch / 142 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Speakers  
13 cm round X 2  
Audio Output  
Full Range - 10W + 10W  
Antenna Terminal  
(VHF/UHF,  
75 ohms (VHF/UHF)(F-type connector)  
ATSC/DIGITAL  
CABLE IN)  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
External Input Jacks  
Component Input  
Jack  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
Pb/Pr: 0.7 Vp-p 75 ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input Jacks  
Audio Output Jacks  
(FIX)  
500mVrms (-4dBs) Low impedance (1000 Hz when modulated 100%)  
Digital Out (optical) x 1  
Optical Output  
Digital Audio  
HDMI jack x 1  
Digital–In  
Note: The Digital–In terminal is not compatible with picture signals of a  
personal computer  
Dimensions (inch)  
W X H X D (cm)  
47 1/4 x 48 7/6 x 24 1/2  
120 x 116.9 x 82.2  
56 7/8 x 51 1/8 x 28 3/8  
136.6 x 129.6 x 66.7  
Weight (lbs / kg)  
170 / 77  
184 / 83.5  
Accessories  
remote control unit x 1 / AA batteries X 2  
Specifications subject to change without notice.  
Note:  
• The open source software is embedded in this product. For more information, please go to:  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware 9EJL4 User Manual
JBL Speaker PRX812W User Manual
JL Audio Car Speaker SB T TTNCRW 10W3v2 User Manual
John Lewis Freezer JLFFW2007 User Manual
JVC Camcorder GR D 23 User Manual
JVC Camcorder R DV500US User Manual
JVC Car Stereo System GET0669 001A User Manual
JVC Car Stereo System LVT1372 003A User Manual
Kenwood Cassette Player CT 201 User Manual
KitchenAid Range KEES702 User Manual