DVD DIGITAL CINEMA SYSTEM
TH-A30R
Consists of XV-THA30R, SP-XA30, SP-XSA30 and SP-WA30
STANDBY/ON
AUDIO
RDS
DISPLAY
TV
VCR
STEP
TV/VIDEO
DISPLAY
TV CHANNEL
AUDIO/
SUBTITLE
TV VOLUME
FM MODE
VCR
CONTROL
DVD
FM/AM
AUX
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
ENTER
VOLUME
TOP MENU MENU RETURN MUTING
STANDBY
AUDIO/FM MODE
DSP
STANDBY/ON
D
I
G
I
T
A
L
VOLUME
SOURCE
S
I
U
R
R
O
U
N
D
L
DVD DIGITAL CINEMA SYSTEM TH-A30R
D
G
I
T
A
RM-STHA30R
DVD CINEMA SYSTEM
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0945-010B
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
1
CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
2
WARNING LABEL, PLACED INSIDE THE UNIT
1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage.
Locate the apparatus as follows:
Front:
Sides:
Top:
Back:
Bottom:
No obstructions open spacing.
No obstructions in 10 cm from the sides.
No obstructions in 10 cm from the top.
No obstructions in 15 cm from the back
No obstructions, place on the level surface.
In addition, maintain the best possible air circulation as illustrated.
Spacing 15 cm or more
XV-THA30R
Wall or obstructions
Front
Stand height 15 cm or more
Floor
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ONTHE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be
taken if you are to obtain the best results and safety is to be assured.
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing
connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
Do be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw
the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has
a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety.It is illegal to watch
television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved
stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result in a fatal
electrical shock.;
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Parts Identification...................................... 2
Center Unit ................................................................................. 2
Remote Control .......................................................................... 3
Moving to a Particular Portion Directly ................................... 29
Searching for a Particular Point ............................................... 30
Repeating Playback .................................................................. 30
7 Repeat Play ........................................................................... 30
7 A–B Repeat........................................................................... 30
Programming the Playing Order of the Chapters
—Program Play.................................................................. 31
DVD Special Effect Playback .................................................. 33
7 Still Picture/Frame-by-Frame Playback ............................... 33
7 Slow Motion Playback ......................................................... 33
7 Zoom .................................................................................... 33
Getting Started........................................... 4
Before Installation ...................................................................... 4
Checking the Supplied Accessories ........................................... 4
Putting Batteries in the Remote Control .................................... 4
Connecting the FM and AM Antennas ....................................... 5
Speaker Layout Diagram............................................................ 6
Connecting the Speakers ............................................................ 7
Connecting Audio/Video Component ........................................ 8
VCD/CD Playback...................................... 34
Showing the On-Screen Bar ..................................................... 34
Checking the Remaining Time ................................................. 34
Disc Menu-Driven Playback (Only for VCD).......................... 35
Moving to a Particular Portion Directly ................................... 35
Searching for a Particular Point ............................................... 35
Repeating Playback .................................................................. 36
7 Repeat Play ........................................................................... 36
7 A–B Repeat........................................................................... 36
Programming the Playing Order of the Tracks
Basic DVD Operations................................ 10
1 Turn On the Power ............................................................... 10
2 Select the Source.................................................................. 10
3 Load a DVD ......................................................................... 10
4 Start Playback ...................................................................... 10
5 Adjust the Volume................................................................ 10
6 Activate Surround or DSP Mode ......................................... 11
7 Stop Playback ...................................................................... 11
Basic VCD/CD Operations .......................... 12
1 Turn On the Power ............................................................... 12
2 Select the Source.................................................................. 12
3 Load a VCD/CD .................................................................. 12
4 Start Playback ...................................................................... 12
5 Adjust the Volume................................................................ 12
6 Activate DSP Mode ............................................................. 13
7 Stop Playback ...................................................................... 13
—Program Play.................................................................. 37
Selecting Playback Channel ..................................................... 38
VCD Special Effect Playback .................................................. 39
7 Still Picture/Frame-by-Frame Playback ............................... 39
7 Slow Motion Playback ......................................................... 39
7 Zoom .................................................................................... 39
MP3 Introduction ...................................... 40
Basic Tuner Operations .............................. 14
MP3 Playback........................................... 41
Starting Playback ..................................................................... 41
Operations Using the On-Screen Display ................................ 42
Moving to a Particular Track Directly...................................... 43
Repeating Playback .................................................................. 43
1 Turn On the Power ............................................................... 14
2 Select the Band .................................................................... 14
3 Adjust the Volume................................................................ 14
4 Tune into a Station ............................................................... 14
Other Basic Operations .............................. 15
Enjoying Sounds from the External Component ..................... 15
Turning Off the Power with the Timer ..................................... 15
Tuner Operations....................................... 44
Tuning in Stations .................................................................... 44
Using Preset Tuning ................................................................. 45
Selecting the FM Reception Mode ........................................... 45
Using the RDS (Radio Data System)
Speaker Settings....................................... 16
Setting the Delay Time ............................................................. 16
to Receive FM Stations ...................................................... 46
Searching for a Program by PTY Codes .................................. 47
7 Description of the PTY codes .............................................. 48
Creating Realistic Sound Fields ................... 18
7 Dolby Digital and DTS Digital Surround............................. 18
7 Dolby Surround .................................................................... 18
7 DSP (Digital Signal Processor) Modes ................................ 19
Adjusting Stereo Sound............................................................ 20
Adjusting Dolby Digital and DTS Digital Surround................ 21
Activating Dynamic Range Compression ................................ 21
Adjusting Dolby Surround ....................................................... 22
Adjusting DSP Modes .............................................................. 23
Setting up the DVD Preferences ................. 50
Setting the Initial Languages .................................................... 50
Introducing the DVD Preference (System) .............................. 51
Setting the Parental (Rating) Level .......................................... 53
Operating JVC’s Components...................... 54
Operating Other Manufacturers’ TV ............ 55
Maintenance ............................................. 56
Troubleshooting......................................... 57
Specifications............................................ 58
Disc Introduction—DVD/VCD/CD ................ 25
Basic Disc Operations ................................ 26
DVD Playback ........................................... 27
Showing the On-Screen Bar ..................................................... 27
Selecting the Subtitles .............................................................. 28
Selecting the Audio Languages ................................................ 28
Selecting the Multi-Angle Views ............................................. 28
Checking the Remaining Time ................................................. 29
Disc Menu-Driven Playback .................................................... 29
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Center Unit
Front Panel
1
2
3
4
5
6
7
8
STANDBY
AUDIO/FM MODE
STANDBY/ON
D
I
G
I
T
A
L
VOLUME
SOURCE
DSP
SURROUND
DVD DIGITAL CINEMA SYSTEM TH-A30R
D
I
G
I
T
A
L
9
p
q
w
See pages in the parentheses for details.
Front Panel
1 STANDBY/ON
button and STANDBY lamp (10 – 14)
7 Remote sensor
2 AUDIO/FM MODE button (28, 38, 45)
3 Multi operation buttons
• 4, ¢, and 7
4 Disc tray (10, 12)
8 3/8 (play/pause) button (10, 12, 26, 41)
• Pressing this button also turns on the power and
changes the source to the DVD player.
9 DSP button (11, 13, 23)
5 0 (open/close) button (10 – 13, 32, 37, 41)
• Pressing this button also turns on the power and
changes the source to the DVD player.
6 Display window
p VOLUME + and – buttons (10, 12, 14)
q SOURCE button (14, 15, 44, 45)
w Illumination lamp (10, 12, 14)
Display window
1
2
3
4
5
6
7
8
ST
TUNED
RDS
PROGRAM PBC MHz
DSP Hz
k
TITLE
LINEAR PCM
L
C
LFE
S
R
LS
RS
9
p
See pages in the parentheses for details.
Display
1 Sound signal indicators (11, 13, 18)
6 DSP indicator (23)
• PRO LOGIC, DOLBY DIGITAL, DTS,
and LINEAR PCM
7 PBC (Play Back Control) indicator (34)
8 Frequency unit indicators
2 TITLE indicator (26)
3 RDS indicator (46)
• MHz (for FM station) and kHz (for AM station)
9 Audio channel indicators
4 Tuner mode indicators (14, 44, 45)
• TUNED and ST (stereo)
• Indicates audio channels currently being played back.
p Main display
5 PROGRAM indicator (31, 37, 45)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
See pages in the parentheses for details.
Remote Control
1 STANDBY/ON
2 VCR
3 TV
AUDIO button (10 – 14)
button (54)
button (10, 12, 54, 55)
STANDBY/ON
AUDIO
4 STEP button (33, 39)
1
5 DISPLAY button (27, 34)
6 AUDIO/FM MODE button (28, 38, 45)
7 SUBTITLE button (28)
8 Source selecting buttons (14, 15, 44)
• DVD, FM/AM, AUX
• Pressing one of these buttons also turns on the power.
9 4, 7, 3/8, and ¢ buttons
TUNER PRESET UP and DOWN buttons (45)
FF (Fast-forward) and REW (Rewind) buttons
p VCR CHANNEL + and – buttons (54)
TUNING + and – buttons (14, 44)
¡ F. (Forward) SEARCH and 1 B. (Back) SEARCH
buttons
2
3
4
t
y
RDS
TV
VCR
STEP
TV/VIDEO
DISPLAY
DISPLAY
TV CHANNEL
u
i
5
AUDIO/
SUBTITLE
TV VOLUME
FM MODE
6
7
8
VCR
CONTROL
DVD
FM/AM
AUX
o
TUNER PRESET
DOWN
UP
9
p
FF
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
q Menu operation buttons
• 3, 2, 5, and ∞ buttons
• ENTER button
w VOLUME + and – buttons (10, 12, 14)
e TOP MENU button (29)
r MENU button (29, 35)
t TV/VIDEO button (10, 12, 54, 55)
y RDS DISPLAY button (46)
ENTER
q
w
VOLUME
TOP MENU MENU RETURN MUTING
u TV CHANNEL + and – buttons (54, 55)
i TV VOLUME + and – buttons (54, 55)
o VCR CONTROL buttons (54)
;
a
e
r
IMPORTANT:
If you press VCR CONTROL, this remote control will work ONLY
for the JVC’s VCR. When you want to operate the system again,
press DVD or FM/AM.
; MUTING button (10, 13)
a RETURN button (35, 51, 52)
To open the cover of the remote control, push here, then
slide downward.
OLUM
AU
TUNER PET
X
CONVTCRR
OL
RM-STHA30R
DVD CINEMA SYSTEM
B
.SEAR
VCR C
TUNING
CH
ENTER
F
.SEARCH
TO
P
M
ENU
V
O
MENU
LUME
RETURN
MUTING
1
PTY
T
-
-
Y
4
2
PTY SEARCH
T
Y
SE
AR
C
5
3
H
PTY
Y
+
+
T
SOUND
6
SETTIN
/
I
I
I
RM
D
V
-STH
D
CINEMA SYSTEM
A30R
Inside of the Cover
TOP MENU MENU RETURN MUTING
Inside of the Cover
1 Number buttons
p SETTING button (16, 17)
q PRO LOGIC button
(15, 17, 22)
w SETUP button (51 – 53)
e TEST button (19)
r D.R.C button (21)
t DSP MODE button
(11, 13, 20, 23)
SOUND
(29, 35, 43, 54, 55)
PTY + and – buttons (47)
1
PTY –
4
2
3
9
p
PTY SEARCH
PTY +
SETTING
PRO LOGIC
TEST
PTY SEARCH button (47)
2 SLOW button (33, 39)
3 ZOOM button (33, 39)
4 ANGLE button (28)
5 REPEAT button (30, 36, 43)
6 A–B REPEAT button
(31, 36)
1
2
5
6
q
w
e
r
7
8
9
SLOW
SETUP
0
3
4
5
6
7
8
ANGLE
REPEAT
CLEAR
ZOOM
D.R.C
DSP MODE
y PROGRAM button
(31, 32, 37, 45)
t
A-B REPEAT PROGRAM
7 CLEAR button (29, 35, 38)
8 SEARCH button
(29, 35, 43)
9 SOUND button (20 – 24)
u SLEEP button (15)
i REMAIN button (29, 34)
y
SEARCH
REMAIN
SLEEP
u
i
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Before Installation
General Precautions
• DO NOT insert any metal object into the center unit.
• DO NOT disassemble the center unit or remove screws, covers, or
cabinet.
Putting Batteries in the Remote Control
Before using the remote control, put two supplied batteries first.
• When using the remote control, aim the remote control directly at
the remote sensor on the center unit.
1. On the back of the remote control, remove the
battery cover.
• DO NOT expose the center unit to rain or moisture.
Locations
• Install the center unit in a location that is level and protected from
moisture.
• The temperature around the center unit must be between 5˚C and
35˚C (41˚F and 95˚F).
• Make sure there is good ventilation around the center unit. Poor
ventilation could cause overheating and damage the center unit.
Handling the center unit
2. Insert batteries. Make sure to match the polarity:
(+) to (+) and (–) to (–).
• DO NOT touch the power cord with wet hands.
• DO NOT pull on the power cord to unplug the cord. When
unplugging the cord, always grasp the plug so as not to damage
the cord.
• Keep the power cord away from the connecting cords and the
antenna. The power cord may cause noise or screen interference. It
is recommended to use a coaxial cable for antenna connection,
since it is well-shielded against interference.
• When a power failure occurs, or when you unplug the power cord,
the preset settings such as preset FM/AM channels and sound
adjustments may be erased in a few days.
3. Replace the cover.
Checking the Supplied Accessories
Check to be sure you have all of the following supplied accessories.
The number in the parentheses indicates the quantity of the pieces
supplied.
• Remote Control (1)
• Batteries (2)
• AM Loop Antenna (1)
• FM Antenna (1)
• Video cord (1)
If the range or effectiveness of the remote control decreases, replace
the batteries. Use two UM-4“AAA”/IEC “R03” type dry-cell
batteries.
CAUTION:
If anything is missing, contact your dealer immediately.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity: (+)
to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM and AM Antennas
If AM reception is poor, connect single vinyl-covered
wire (not supplied).
1
2
3
AM Loop Antenna
(supplied)
If FM reception is poor, connect
outdoor FM antenna (not supplied).
Snap the tabs on the loop into
the slots of the base to
FM Antenna (supplied)
assemble the AM loop antenna.
Y/C
COMP.
MIN
MIN
MIN
MIN
Center unit
Cooling fan
(See “About the cooling fan” below.)
FM antenna connection
AM antenna connection
Connect the supplied FM antenna to the FM 75 Ω COAXIAL
terminal as temporary measure.
Connect the supplied AM loop antenna to the AM and H terminals.
Turn the loop until you have the best reception.
Extend the supplied FM antenna horizontally.
• If reception is poor, connect an outdoor antenna. Before attaching
a 75 Ω coaxial cable (with a standard type connector), disconnect
the supplied FM antenna.
• If reception is poor, connect an outdoor single vinyl-covered wire
to the AM terminal. (Keep the AM loop antenna connected.)
Note:
If the AM loop antenna wire is covered with vinyl, remove
the vinyl by twisting it as shown in the diagram.
About the cooling fan
A cooling fan is mounted on the rear panel of the center unit to
prevent abnormal temperature inside the center unit, thus assuring
normal operation of the unit. The cooling fan automatically starts
rotating to supply external cool air to the inside of the center unit
when the internal temperature goes up.
For safety, observe the following carefully.
• Make sure there is good ventilation around the center unit. Poor
ventilation could overheat and damage the center unit.
• DO NOT block the cooling fan and the ventilation openings or
holes. (If they are blocked by a newspaper or cloth, etc., the
heat may not be able to get out.)
• DO NOT touch the speaker cords to the cooling fan.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Speaker Layout Diagram
Center unit
COMPACT
DIGITAL VIDEO
STANDBY
AUDIO/FM MODE
STANDBY/ON
D
I
G
I
I
T
A
L
DSP
VOLUME
SOURCE
S
D
U
I
R
R
O
U
N
D
L
DVD DIGITAL CINEMA SYSTEM TH-A30R
G
T
A
Subwoofer
Right front
speaker
Left front
speaker
Center speaker
Left rear
speaker
Right rear
speaker
MIN
MIN
N
MIN
To center speaker
To subwoofer
To left front speaker
To right front speaker
To right rear
speaker
To left rear
speaker
6
Download from Www.Somanuals.com. All Manuals Search And Download.
When setting the speakers
Connecting the Speakers
To obtain the best possible sound from this system, you need to
place all the speakers except the subwoofer at the same distance
from the listening position with each front faced toward the listener.
Since bass sound is non-directional, you can place a subwoofer
wherever you like. Normally place it in front of you.
Connect the satellite speakers, center speaker, and subwoofer to the
terminals on the rear panel using speaker cords supplied.
Labels are attached to the speaker cords to indicate the terminals to
be connected.
• Connect the red cord to the red (+) terminal, and the black cord to
the black (–) terminal respectively.
Center speaker
Left front
speaker
Right front
speaker
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
Subwoofer
Connecting speaker cords to the terminals
1
2
3
Left rear
speaker
Right rear
speaker
If your speakers cannot be placed at the same distance from the
listening position
You can adjust the delay time of the center speaker and rear
speakers. For in-depth information about adjusting the delay time,
see “Setting the Delay Time” on page 16 and 17.
1 Press and hold the terminal clamp.
2 Insert the speaker cord.
Note:
You can change the phase of subwoofer sounds by connecting the
speaker cords to the terminals inversely—the red cord to the black
terminal, and the black cord to the red terminal.You may get the more
effective bass sounds by changing the phase.
3 Release the finger from the clamp.
Notes:
• If the speaker cord is covered with vinyl, remove the
vinyl by twisting it as shown in the diagram.
• Make sure the core wire of speaker cords do not
expose to out of the terminals. This could cause
short-circuit.
CAUTION:
• When attaching the satellite speakers on the wall, have them
attached to the wall by a qualified person.
DO NOT attach the satellite speakers on the wall by yourself to
avoid an unexpected damage of their falling from the wall, caused
by incorrect attachment or weakness in the wall.
• Care is required in selecting a location for attaching speakers to the
wall. Injury to personnel, or damage to equipment, may result if the
speakers are attached in a location which interferes with daily
activities.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting Audio/Video Component
Turn the power off to all components before connections.
Audio component connection
Illustrations of the input/output terminals below are typical
examples.
Connect the other component to the center unit with the
audio cord.
When you connect the other component, refer also to its
manuals since the terminal name actually printed on the rear
vary among the components.
Use the cord supplied with the other component or
purchase it at an electric appliance store.
If you connect a sound-enhancing device such as a
graphic equalizer between the source component and
the center unit, the sound output through this system
may be distorted.
Audio cord (not supplied)
DBS Tuner
Center unit
Y/C
COMP.
MD Recorder
MIN
Cassette Deck
AUDIO
LEFT
RIGHT
VCR
OUT
TV
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV connection
The S-video cord and the SCART cable are not supplied with this system.
Use the cords or cables supplied with the other component or purchase them at an electric appliance store.
Video cord (supplied)
SCART cable (not supplied)
A
B
C
S-video cord (not supplied)
Y/C
You can select one of three connection types—
For using the composite video cord or S-video cord
• If your TV has S-video (Y/C-separation) jack, connect it using an
S-video cord (not supplied)
By using this jack, you can get a better picture quality than using
A
,
B
, and
C
.
For using the SCART cable (
C
)
• If S-Video (Y/C-separation) is equipped for your
TV, set Y/C–COMP. selector of the center unit to
Y/C.You can get a better picture quality by using
S-Video (Y/C-separation) setting.
COMP.
Y/C
B
.
• If S-Video (Y/C-separation) is not equipped for
your TV, set Y/C–COMP. selector to COMP.
composite video cord connection
A
.
COMP.
A
B
Illustrations below are
typical examples.
When you connect the TV,
refer also to its manual since
the terminal names actually
printed on the rear vary
among the components.
TV
Y/C
COMP.
MIN
MIN
MIN
MIN
4
Y/C
COMP.
Y/C–COMP. selector
C
Note:
On the rear panel SCART cable is indicated as “AV OUT.” However,
this terminal is designed as video output. So, no sound comes out.
Now, you can plug the power cord of the center unit into the AC outlet.
Note:
Keep the power cord away from the connecting cords and the antenna
cables. The power cord may cause noise or screen interference.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic DVD Operations
2
Select the Source
This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
DVD
Press DVD.
The source changes to DVD.
If operations using the center unit are different from those
using the remote control, they are then explained.
3
Load a DVD
1STANDBY/ON
On the front panel ONLY:
AUDIO
STANDBY/ON
Press 0 to open the disc tray, then place a DVD correctly
with its label side up.
AUDIO
RDS
TV
TV
VCR
TV/VIDEO
DISPLAY
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
VCR
2DVD
77
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
43/8
CORRECT
INCORRECT
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
4
Start Playback
ENTER
TUNER PRESET
Press 3/8.
The disc tray closes. “LOADING” appears for a
while.
• You can also start playback by closing the
disc tray using 0 on the front panel.
5VOLUME +
5VOLUME –
VOLUME
TOP MENU MENU
RETURN MUTING
MUTING
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
7
SLOW
8
9
SETUP
5
Adjust the Volume
0
ZOOM
ANGLE
D.R.C
DSP MODE
6DSP MODE
To increase the volume, press and hold VOLUME +.
To decrease the volume, press and hold VOLUME –.
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
VOLUME
For in-depth information about DVD operations, see
pages 25 to 33.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
1
Turn On the Power
Notes:
• By pressing VOLUME + or – repeatedly, you can adjust the volume
level step by step.
• The volume level can be adjusted within 51 steps—
“MIN (minimum),” 01 to 49, and “MAX (maximum).”
Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
• When you use a JVC’s TV, you can turn on your TV by pressing
TV
on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 55.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see “Setting the Initial
Languages” on pages 50 and 51.
To turn off the sounds temporarily
From the remote control ONLY:
TOP MENU MENU RETURN MUTING
Press MUTING.
Press STANDBY/ON
STANDBY/ON on the front panel).
AUDIO (or
To restore the sound, press
MUTING again.
STANDBY/ON
AUDIO
The STANDBY lamp goes off and the illumination
lamp on the center unit lights up. The source
• Pressing VOLUME + or – also restores the sound.
indication selected previously appears on the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Activate Surround or DSP Mode
7
Stop Playback
TUNER PRESET
You can enjoy two kinds of surround—Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround) and DSP
modes.
Press 7 twice.
Playback stops completely and “DVD” appears
on the display. (The DVD player goes on
working for 3 minutes after playback stops.)
Digital Multichannel Surround—Dolby Digital
and DTS Digital Surround
Dolby Digital or DTS Digital Surround takes effect only when you
enjoy a disc encoded with its signals—the DOLBY DIGITAL or
DTS indicator lights up on the display.
• This system can memorize the end point even when you press 7
once. When you start playback again by pressing 3/8, playback
begins from where it has been stopped—Resume play.
To remove the loaded disc
Press 0.
“OPEN” appears on the display and the disc tray comes out.
Sound signal
indicators on the
display
To close the disc tray, press 0 again.
• If you do not press the button, the disc tray closes
automatically after 3 minutes.
To activate Dolby Digital or DTS Digital Surround
To turn off the power (into standby)
When a disc encoded with the Dolby Digital or DTS Digital
Surround is loaded, the system detects it and starts playing the disc
automatically with Multichannel Surround activated.
– For in-depth information about surround modes, see “Creating
Realistic Sound Fields” on pages 18 and 21.
Press STANDBY/ON
AUDIO (or
STANDBY/ON
AUDIO
STANDBY/ON on the front panel).
The illumination lamp goes off and the STANDBY
lamp lights up.
• If you press STANDBY/ON
AUDIO (or
STANDBY/ON on the front panel) while the disc tray is kept
open, the disc tray closes automatically, then the system is turned
off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
DSP modes—THEATER, HALL, LIVE CLUB,
DANCE CLUB
DSP modes take effect only when you enjoy a disc recorded using
Linear PCM—the LINEAR PCM indicator lights up on the display.
Sound signal
indicators on the
display
To activate DSP modes
DSP MODE
Press DSP MODE (or DSP on the front panel).
The DSP indicator lights up and the current DSP mode
appears on the display for a while.
• Each time you press the button, DSP mode changes as follows:
THEATER
HALL
LIVE CLUB
Normal
indication
(canceled)
DANCE CLUB
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19, 23, and 24.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Speaker Settings” on pages 16 and 17.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic VCD/CD Operations
2
Select the Source
1STANDBY/ON
STANDBY/ON
AUDIO
AUDIO
DVD
Press DVD.
RDS
TV
TV/VIDEO
TV
VCR
TV/VIDEO
DISPLAY
TV CHANNEL
DISPLAY STEP
AUDIO/
3
Load a VCD/CD
SUBTITLE
FM MODE
TV VOLUME
VCR
2DVD
77
DVD
FM/AM
AUX
CONTROL
On the front panel ONLY:
Press 0 to open the disc tray, then place a disc correctly
with its label side up.
TUNER PRESET
DOWN
UP
FF
43/8
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
ENTER
5VOLUME –
5VOLUME +
CORRECT
INCORRECT
VOLUME
TOP MENU MENU
RETURN MUTING
MUTING
• When using a CD single (8 cm), place it on the inner circle of the
disc tray.
• Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the center unit.
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
7
SLOW
8
9
SETUP
0
ZOOM
6DSP MODE
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
4
Start Playback
CLEAR
SEARCH
REMAIN
SLEEP
TUNER PRESET
Press 3/8.
The disc tray closes. “LOADING” appears for
a while.
• You can also start playback by closing the
disc tray using 0 on the front panel.
• SVCD can be operated by using the VCD operation
procedure.
• For in-depth information about VCD/CD operations,
see pages 25, 26, and 34 to 39.
5
Adjust the Volume
1
Turn On the Power
To increase the volume, press and hold VOLUME +.
To decrease the volume, press and hold VOLUME –.
Before turning on the system, turn on your TV if necessary and
select the correct video input. (See the manual supplied with your
TV.)
VOLUME
• When you use a JVC’s TV, you can turn on your TV by pressing
TV
on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 55.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see “Setting the Initial
Languages” on pages 50 and 51.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
STANDBY/ON
Press STANDBY/ON
STANDBY/ON on the front panel).
The STANDBY lamp goes off and the illumination
lamp on the center unit lights up. The source
AUDIO (or
• By pressing VOLUME + or – repeatedly, you can adjust the volume
level step by step.
• The volume level can be adjusted within 51 steps—
“MIN (minimum),” 01 to 49, and “MAX (maximum).”
AUDIO
indication selected previously appears on the display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
7
Stop Playback
Press 7 twice.
TUNER PRESET
Playback stops completely and “VCD” or “CD”
appears on the display. (The DVD player goes
on working for 3 minutes after playback stops.)
• This system can memorize the end point even
when you press 7 once. When you start playback again by
pressing 3/8, playback begins from where it has been stopped—
Resume play.
TOP MENU MENU RETURN MUTING
To restore the sound, press
MUTING again.
• Pressing VOLUME + or – also
restores the sound.
To remove the loaded disc
Press 0.
“OPEN” appears on the display and the disc tray comes out.
6
Activate DSP Mode
You can enjoy DSP modes.
To close the disc tray, press 0 again.
• If you do not press the button, the disc tray closes
automatically after 3 minutes.
DSP modes—THEATER, HALL, LIVE CLUB,
DANCE CLUB
DSP modes take effect only when you enjoy a disc recorded using
Linear PCM—the LINEAR PCM indicator lights up on the display.
To turn off the power (into standby)
Sound signal
indicators on the
display
Press STANDBY/ON
STANDBY/ON on the front panel).
The illumination lamp goes off and the STANDBY
lamp lights up.
AUDIO (or
STANDBY/ON
AUDIO
• If you press STANDBY/ON
AUDIO (or
STANDBY/ON on the front panel) while the disc tray is kept
open, the disc tray closes automatically, then the system is turned
off.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
To activate DSP modes
Press DSP MODE (or DSP on the front panel).
The DSP indicator lights up and the current DSP mode
appears on the display for a while.
• Each time you press the button, DSP mode changes as
follows:
DSP MODE
THEATER
HALL
LIVE CLUB
Normal
indication
(canceled)
DANCE CLUB
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19, 23, and 24.
Note:
Before activating the DSP mode, adjust the speaker setting to bring
out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Speaker Settings” on pages 16 and 17.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Tuner Operations
3
Adjust the Volume
1STANDBY/ON
AUDIO
STANDBY/ON
To increase the volume, press and hold VOLUME +.
To decrease the volume, press and hold VOLUME –.
AUDIO
RDS
DISPLAY
TV
VCR
TV/VIDEO
VOLUME
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
CAUTION:
VCR
DVD
FM/AM
AUX
CONTROL
2FM/AM
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
TUNER PRESET
DOWN
UP
FF
REW
4TUNING –
4TUNING +
VCR CHANNEL
TUNING
Notes:
B.SEARCH
F.SEARCH
• By pressing VOLUME + or – repeatedly, you can adjust the volume
level step by step.
ENTER
• The volume level can be adjusted within 51 steps—
“MIN (minimum),” 01 to 49, and “MAX (maximum).”
• You can turn off the sounds temporarily by pressing MUTING.
3VOLUME –
3VOLUME +
VOLUME
TOP MENU MENU
RETURN MUTING
MUTING
4
Tune into a Station
From the remote control:
Press and hold TUNING + or – until the station frequency starts
For in-depth information about tuner operations, see
“Tuner Operations” on pages 44 to 49.
changing continuously on
VCR CHANNEL
TUNING
the display.
B.SEARCH
F.SEARCH
The system starts searching
for a station.
1
Turn On the Power
On the front panel:
Press STANDBY/ON
AUDIO (or
STANDBY/ON
AUDIO
1) Press 7 so that “MANUAL” appears on the display.
2) Press and hold ¢ or 4 until the station frequency starts
STANDBY/ON
on the front panel).
The STANDBY lamp goes off and the
illumination lamp lights up on the center unit.
The source indication selected previously appears
on the display.
changing continuously on the display.
The system starts searching for a station.
Notes:
• When a station of sufficient signal strength is tuned in, the system
2
Select the Band
stops searching, and the
indicator lights up on the display.
• When an FM stereo program is received, the
indicator also
lights up.
From the remote control:
• When you press the button repeatedly, the frequency changes step
by step.
FM/AM
Press FM/AM.
The last received station of the selected band is tuned into.
• Each time you press the button, the band alternates
between FM and AM.
To turn off the power (into standby)
STANDBY/ON
Press STANDBY/ON
STANDBY/ON on the front panel) again.
AUDIO (or
On the front panel:
AUDIO
Press SOURCE repeatedly until the desired band (FM
or AM) appears on the display.
The last received station of the selected band is tuned into.
• Each time you press the button, the source changes as
follows:
SOURCE
The illumination lamp goes off and the STANDBY
lamp lights up.
• A small amount of power is consumed even in
standby mode. To turn the power off completely, unplug the AC
power cord.
DVD player*
AUX IN
FM
AM
* “WAIT” appears on the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Basic Operations
2 Start playback on the external component.
• For in-depth information about the external component, see
the manual supplied for it.
STANDBY/ON
AUDIO
RDS
PRO LOGIC
TV
VCR
TV/VIDEO
DISPLAY
3 Press PRO LOGIC to activate Dolby
Surround.
TV CHANNEL
DISPLAY STEP
AUDIO/
• Each time you press the button, Dolby Surround
mode changes as follows:
SUBTITLE
FM MODE
TV VOLUME
VCR
DVD
FM/AM
AUX
CONTROL
AUX
PRO LOGIC
3 STEREO
TUNER PRESET
DOWN
UP
FF
STEREO
REW
(canceled)
VCR CHANNEL
TUNING
• When Dolby Surround activates, the PRO LOGIC indicator
B.SEARCH
F.SEARCH
lights up on the display.
ENTER
– For in-depth information about Pro Logic modes, see “Creating
Realistic Sound Fields” on pages 18 and 22.
VOLUME
TOP MENU MENU
RETURN MUTING
Turning Off the Power with the Timer
You can fall asleep while listening to music—Sleep Timer.
From the remote control ONLY:
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
PRO LOGIC
SLEEP
7
SLOW
8
9
SETUP
0
ZOOM
Press SLEEP.
SLEEP
ANGLE
D.R.C
DSP MODE
• Each time you press the button, the shut-off time
changes as follows:
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
10
20
150
30
60
90
120
OFF
(Canceled)
When the shut-off time comes, the system turns off automatically.
To check or change the time remaining until the
shut-off time
Enjoying Sounds from the External
Component
Press SLEEP once.
SLEEP
The remaining time (in minutes) appears on the display.
You can enjoy sounds from the external component connected to the
AUX IN jacks on the rear panel of the center unit.
• When you listen to sounds encoded with Dolby Surround, you can
enjoy Dolby Surround.
• By pressing SLEEP, you can change the shut-off time.
To cancel the Sleep Timer
Press SLEEP repeatedly until “OFF” appears on the
display.
• Turning off the power also cancels the Sleep Timer.
SLEEP
AUX
1Select AUX as the source.
From the remote control:
Press AUX.
On the front panel:
SOURCE
Press SOURCE repeatedly until “AUX IN”
appears on the display.
• Each time you press the button, the source changes
as follows:
DVD player*
AUX IN
FM
AM
* “WAIT” appears on the display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Settings
Setting the Delay Time
Adjust the delay time of the sounds from the center speaker and the
rear speakers, comparing to that of the sounds from the front
speakers. If the distance to the center speaker* and/or the rear
speakers** from your listening point is almost the same as from the
front speakers, select “00 MS (msec).”
* You can adjust the delay time only when the DOLBY DIGITAL
or DTS indicator is lit on the display.
** You can adjust the delay time only when the DOLBY DIGITAL,
DTS, or PRO LOGIC indicator is lit on the display.
STANDBY/ON
AUDIO
RDS
TV
VCR
TV/VIDEO
DISPLAY
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
VCR
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
For Dolby Digital or DTS Digital Surround:
B.SEARCH
F.SEARCH
Before you start, remember...
2 3
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
ENTER
1 Select and play a DVD encoded with Dolby
VOLUME
Digital or DTS Digital Surround.
TOP MENU MENU
RETURN MUTING
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
2 Press SETTING repeatedly until one of
SETTING
SETTING
SETTING
PRO LOGIC
TEST
6
delay time indications (with the current
setting*) appears on the display.
PRO LOGIC
7
SLOW
8
9
SETUP
0
ANGLE
ZOOM
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
• Each time you press the button, the indication in the main
display changes as follows:
C–DLY
R–DLY
Normal indication
(canceled)
C–DLY (Center delay) : To register delay time for center
speaker—from 0 msec to 5 msec
R–DLY (Rear delay) : To register delay time for rear
speakers—from 0 msec to 15 msec
* The initial setting for the center speaker is “00 MS.”
The initial setting for the rear speakers is “00 MS.”
If you have already changed the setting, a different value will
be shown.
3 Press 3 or 2 to adjust delay
time.
• 3 : Increases delay time.
• 2 : Decreases delay time.
ENTER
• 1 msec increase (or decrease) in delay
time corresponds to 30 cm increase (or
decrease) in distance.
4 Repeat steps 2 and 3 to adjust the
other delay time.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
For Dolby Pro Logic:
Left front
speaker
Center speaker
Right front
speaker
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Subwoofer
AUX
1 Press AUX to select the external
3.0 m
2.7 m
2.4 m
2.1 m
component as the source.
2 Start playing a source encoded with Dolby
Surround.
PRO LOGIC
3 Press PRO LOGIC repeatedly on the
Left rear
speaker
Right rear
speaker
remote control to select Dolby Pro
Logic.
SETTING
4 Press SETTING repeatedly until one of
delay time indications (with the current
setting*) appears on the display.
1 msec increase (or decrease) in delay time corresponds to
30 cm increase (or decrease) in distance.
Ex.: In this case, set C–DLY to “01 MS” and R–DLY to
“03 MS”
• Each time you press the button, the indication in the main
display changes as follows:
Normal indication
R–DLY
(canceled)
R–DLY (Rear delay) : To register delay time for rear
speakers—from 15 msec to 30 msec.
* The initial setting for the rear speakers is “15 MS.”
If you have already changed the setting, a different value will
be shown.
5 Press 3 or 2 to adjust delay
time.
• 3 : Increases delay time.
• 2 : Decreases delay time.
ENTER
• 1 msec increase (or decrease) in delay
time corresponds to 30 cm increase (or
decrease) in distance.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
You can use the following surround to reproduce a realistic sound
field.
• Digital Multichannel Surround—Dolby Digital and DTS Digital
Surround
• Dolby Surround
• DSP (Digital Signal Processor) modes
Dolby Pro Logic and Dolby 3 Stereo
Dolby Surround encoding format records the left front channel,
right front channel, center channel, and rear channel signals (total 4
channels) into 2 channels.
The Dolby Pro Logic decoder built in this system decodes these 2
channel signals into original 4 channel signals—matrix-based
multichannel reproduction, and allows you to enjoy a realistic stereo
sound in your listening room.
I Dolby Digital and DTS Digital Surround
To enjoy surround effectively, all the speakers need to be
connected and activated.
When one of Dolby Surround is selected, the PRO LOGIC indicator
lights up on the display.
Dolby Digital*
Indications on the display for each surround
Used to reproduce multichannel sound tracks of the software
encoded with Dolby Digital (
).
• Dolby Digital
Dolby Digital encoding method (so-called discrete 5.1 channel
digital audio format) records and digitally compresses the left front
channel, right front channel, center channel, left rear channel, right
rear channel, and LFE channel signals (total 6 channels, but LFE
channel is counted as 0.1 channel. Therefore, called 5.1 channel).
Since each channel is completely independent from the other
channel signals to avoid interference, you can obtain much better
sound quality with much stereo and surround effects.
• DTS Digital Surround
In addition, Dolby Digital enables stereo rear sounds, and sets the
cutoff frequency of the rear treble at 20 kHz, compared to 7 kHz for
Dolby Pro Logic. These facts enhance the sound movement and
being-there feelings much more than Dolby Pro Logic.
• Dolby Pro Logic
When the system detects Dolby Digital signals, the DOLBY
DIGITAL indicator lights up on the display.
DTS Digital Surround**
Used to reproduce multichannel sound tracks of the software
• Dolby 3 Stereo
encoded with DTS Digital Surround (
).
DTS Digital Surround is another discrete 5.1 channel digital audio
format available on CD, LD, and DVD software.
Compared to Dolby Digital, audio compression rate is relatively low.
This fact allows DTS Digital Surround format to add breadth and
depth to the reproduced sounds. As a result, DTS Digital Surround
features natural, solid and clear sound.
• DSP*
When the system detects DTS Digital Surround signals, the DTS
indicator lights up on the display.
* When you select FM/AM or AUX as the source, the Linear
PCM indicator (
) does not light up.
– According to the speaker settings, some speaker indicators do
not light up. In this case, set the speaker setting appropriately.
I Dolby Surround*
Used to reproduce sound tracks of the VCR tapes encoded with
DOLBY SURROUND
Dolby Surround (
).
This is only used for the sound sources coming through the AUX IN
jacks.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997 Dolby
Laboratories. All rights reserved.
**Manufactured under license from Digital Theater Systems, Inc. US
Pat. No. 5,451,942 and other world-wide patents issued and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc.
All rights reserved.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
I DSP (Digital Signal Processor) Modes
DSP modes have been designed to create important acoustic
surround elements.
To check the speaker connections and settings using the test
tone
1. Select and play a DVD encoded with Dolby Digital or DTS
Digital Surround.
The sound heard in a theater, a hall, a live club, or a dance club
consists of direct sound and indirect sound—early reflections and
reflections from behind. Direct sounds reach the listener directly
without any reflection. On the other hand, indirect sounds are
delayed by the distances of the ceiling and walls.
TEST
2. Press TEST on the remote control.
The test tone comes out from the speakers (except
subwoofer) in the order.
• If there is a speaker from which no sounds comes out, check
the speaker’s connection (see pages 6 and 7.)
These indirect sounds are important elements of the acoustic
surround effects.
3. Press TEST again to stop the test tone.
The following DSP modes are provided with this unit.
THEATER
HALL
: Gives the feeling of a theater.
: Gives clear vocal and the feeling of a concert
hall.
LIVE CLUB
: Gives the feeling of a live music club with a low
ceiling.
DANCE CLUB : Gives a throbbing bass beat.
These DSP modes can be used to add the acoustic surround effects
while reproducing stereo analog software or Linear PCM digital
software, and can give you a real “being there” feeling.
When one of the DSP modes is selected, the DSP indicator lights up
on the display.
Available surround according to the input signal format
⅜: Possible
ן : Impossible Pro Logic*
DSP
(canceled)
Multichannel
Surround
Surround
Pro Logic
3 Stereo
THEATER
HALL
⅜
LIVE CLUB DANCE CLUB STEREO
Analog
ן ן ⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
Linear PCM
⅜
Dolby Digital
Multichannel
⅜
ן ⅜
ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן ן ⅜
ן Dolby Surround
DTS Digital
Surround
* You can use Pro Logic mode for all 2 channel sources, but surround effect does not work sufficiently except Dolby Surround
encoded source.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
3 To adjust the output balance for the front
speakers
REW
FF
VCR CHANNEL
TUNING
1) Press SOUND repeatedly until the
adjustment indication for the front
speakers appears on the display.
SOUND
B.SEARCH
F.SEARCH
2 3
• Each time you press the button, the adjustment indication
ENTER
on the display changes as follows:
00 F 00
00 R 00
CEN
VOLUME
TOP MENU MENU
RETURN MUTING
Normal indication
(canceled)
SW
REAR
SOUND
PRO LOGIC
DSP MODE
SOUND
SETTING
PRO LOGIC
TEST
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
6
2) Press 3 or 2 to adjust the
7
SLOW
8
9
SETUP
output balance.
0
ZOOM
3 : Decreases the left speaker
output, or restores the right
speaker output.
D.R.C
ANGLE
D.R.C
DSP MODE
ENTER
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
2 : Decreases the right speaker
output, or restores the left
speaker output.
• The output balance changes from
OFF (silence), –06 (most reduction) to 00 (no reduction).
• “00 F 00” is the initial setting (the output balance is at the
center position). If you have already changed the setting,
another value will appear.
Adjusting Stereo Sound
You can adjust the following settings.
4 To adjust the output level for the subwoofer
It is recommended that you make adjustments from your actual
listening point while listening to reproduced sounds.
– Output balance for the front speakers
SOUND
1) Press SOUND repeatedly to select
“SW.”
– Output level for the subwoofer
• Each time you press the button, the adjustment
indication on the display changes as follows:
Once you adjust these items, the adjustments take effect for all the
surround modes.
00 F 00
00 R 00
CEN
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
Normal indication
(canceled)
SW
REAR
2) Press 3 or 2 to adjust the
1 Select and play any source except Dolby Digital
output level.
3 : Increases the output level.
2 : Decreases the output level.
• The output level changes from –6
to +6.
• “SW 0dB” is the initial setting. If
you have already changed the
settings, another value will appear.
or DTS Digital Surround.
ENTER
2 Cancel Dolby Surround or DSP modes if they are
activated.
For deactivating Dolby Surround:
PRO LOGIC
Press PRO LOGIC on the remote control until
“STEREO” appears on the display.
For deactivating DSP modes:
DSP MODE
Press DSP MODE (or DSP on the front panel)
until the DSP indicator goes off from the display.
Now, you are ready to start adjustments.
• To adjust the output balance for the front speakers, go to the next
step.
• To adjust the output level for the subwoofer, go to step 4.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press 3 or 2 to adjust the
Adjusting Dolby Digital and
DTS Digital Surround
output balance.
3 : Decreases the left speaker
output, or restores the right
speaker output.
ENTER
You can adjust the following settings while activating Dolby Digital
or DTS Digital Surround.
It is recommended that you make adjustments from your actual
listening point while listening to reproduced sounds.
– Output balance for the front speakers
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes from
OFF (silence), –06 (most reduction) to 00 (no reduction).
– Output balance for the rear speakers
– Output level for the center speaker
– Output level for the rear speakers*
– Output level for the subwoofer
3) Repeat 1) and 2) for setting the other speaker.
* The adjustment is separately memorized for Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), and for
Dolby Pro Logic.
3 To adjust the output levels for the center speaker,
the rear speakers, and the subwoofer
SOUND
1) Press SOUND repeatedly to select the
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
“CEN,” “REAR,” or “SW.”
• Each time you press the button, the adjustment
indication on the display changes as follows:
00 F 00
00 R 00
CEN
1 Select and play a DVD encoded with Dolby
Digital or DTS Digital Surround.
Normal indication
(canceled)
SW
REAR
Now, you are ready to start adjustments.
• To adjust the output balance for the front speakers and the rear
speakers, go to the next step.
• To adjust the output level for the center speaker, the rear speakers,
and the subwoofer, go to step 3.
CEN (Center)
: To adjust the output level for center
speaker (from –6 dB to +6 dB).
REAR
: To adjust the output level for rear
speakers (from –6 dB to +6 dB).
SW (Subwoofer) : To adjust the output level for subwoofer
(from –6 dB to +6 dB).
2 To adjust the output balance for the front
speakers and the rear speakers
• “CEN 0dB,” “REAR 0dB,” and “SW 0dB” are the initial
settings. If you have already changed the settings, another
value will appear.
SOUND
1) Press SOUND repeatedly until one of
the following adjustment indications
appears on the display.
• Each time you press the button, the adjustment indication
on the display changes as follows:
2) Press 3 or 2 to adjust the
output level.
3 : Increases the output level.
2 : Decreases the output level.
ENTER
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
3) Repeat 1) and 2) for setting
the other speakers.
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
Activating Dynamic Range Compression
speakers.
You can enjoy a powerful sound even at a low volume level by
compressing the dynamic range (difference between the maximum
and minimum sounds).
• “00 F 00” and “00 R 00” are the initial setting (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
• This function takes effect only when Dolby Digital is activated.
From the remote control ONLY:
D.R.C
Press D.R.C.
• Each time you press the button, the dynamic range
compression mode alternates between on and off.
Select “DRC ON” while watching the DVD at night. (You can
obtain a powerful sound at a low volume.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
PRO LOGIC
3 Press PRO LOGIC repeatedly on the
remote control to select Dolby Pro Logic
or Dolby 3 Stereo.
STANDBY/ON
AUDIO
The PRO LOGIC indicator lights up on the display.
• Each time you press the button, the indication changes as
follows:
RDS
DISPLAY
TV
VCR
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
PRO LOGIC
STEREO
3 STEREO
SUBTITLE
FM MODE
TV VOLUME
VCR
DVD
FM/AM
AUX
CONTROL
AUX
(canceled)
Now, you are ready to start adjustments.
• To adjust the output balance for the front speakers and the rear
speakers, go to the next step.
• To adjust the output level for the center speaker, the rear speakers,
and the subwoofer, go to step 5.
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
2 3
ENTER
4 To adjust the output balance for the front
speakers and the rear speakers
1) Press SOUND repeatedly until one of
SOUND
VOLUME
TOP MENU MENU
RETURN MUTING
the following adjustment indications
appears on the display.
• Each time you press the button, the adjustment indication
on the display changes as follows:
SOUND
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
PRO LOGIC
DSP MODE
00 F 00
00 R 00
CEN
7
8
9
SLOW
SETUP
0
ANGLE
ZOOM
D.R.C
DSP MODE
Normal indication
(canceled)
SW
REAR
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
speakers.
• When selecting “3 STEREO,” you cannot adjust the output
balance for the rear speakers.
Adjusting Dolby Surround
• “00 F 00” and “00 R 00” are the initial settings (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
You can adjust the following settings while activating Dolby
Surround.
It is recommended that you make adjustments from your actual
listening point while listening to reproduced sounds.
– Output balance for the front speakers
– Output balance for the rear speakers
– Output level for the rear speakers*
2) Press 3 or 2 to adjust the
output balance.
3 : Decreases the left speaker
ENTER
output, or restores the right
– Output level for the subwoofer
speaker output.
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes from
OFF (silence), –06 (most reduction) to 00 (no reduction).
• When Dolby 3 Stereo is activated, you cannot adjust the rear
speakers.
* The adjustment is separately memorized for Digital Multichannel
Surround (Dolby Digital and DTS Digital Surround), and for
Dolby Pro Logic.
• Dolby Surround cannot be used with DSP modes. Once one of
Dolby Surround is activated, DSP modes in use will be canceled.
3) Repeat 1) and 2) for setting the other speakers.
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 3 again.
AUX
1 Press AUX to select the external
component as the source.
2 Start playing a source encoded with Dolby
Surround.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
5 To adjust the output level for the center speaker,
Adjusting DSP Modes
the rear speakers, and the subwoofer.
You can adjust the following settings while activating DSP modes.
It is recommended that you make adjustments from your actual
listening point while listening to reproduced sounds.
– Output balance for the front speakers
1) Press SOUND repeatedly to select the
SOUND
“CEN,” “REAR,” or “SW.”
• Each time you press the button, the indication on
the display changes as follows:
– Output balance for the rear speakers
– Output level for the rear speakers
– Output level for the subwoofer
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
• DSP modes cannot be used with Dolby Surround. Once one of
DSP modes is activated, Dolby Surround in use will be canceled.
• When you play back a DVD encoded with Dolby Digital or DTS
Digital Surround, DSP MODE button (or DSP button on the center
unit) does not work.
CEN (Center)
: To adjust the output level for center
speaker (from –6 dB to +6 dB).
REAR
: To adjust the output level for rear
speakers (from –6 dB to +6 dB).
Before you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
SW (Subwoofer) : To adjust the output level for subwoofer
(from –6 dB to +6 dB).
• When selecting “3 STEREO,” you cannot adjust the output
levels for the rear speakers.
• “CEN 0dB,” “REAR 0dB,” and “SW 0dB” are the initial
settings. If you have already changed the settings, another
value will appear.
1 Select and play any source except Dolby Digital
or DTS Digital Surround.
DSP MODE
2 Press DSP MODE (or DSP on the front
panel) repeatedly to select the desired
2) Press 3 or 2 to adjust the
output level.
DSP mode.
The DSP indicator lights up on the display while the DSP modes
are activated.
3 : Increases the output level.
2 : Decreases the output level.
ENTER
• Each time you press the button, DSP mode changes as follows:
3) Repeat 1) and 2) for setting
the other speakers.
THEATER
HALL
LIVE CLUB
Normal
indication
(canceled)
DANCE CLUB
Now, you are ready to start the adjustment.
• To adjust the output balance for the front speakers and the rear
speakers, go to the next step.
• To adjust the output level for the rear speakers and the subwoofer,
go to step 4 on the next page.
TO BE CONTINUED ON THE NEXT PAGE
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Realistic Sound Fields
4 To adjust the output level for the rear speakers
and the subwoofer.
REW
FF
SOUND
VCR CHANNEL
TUNING
1) Press SOUND repeatedly to select the
“REAR” or “SW.”
B.SEARCH
F.SEARCH
• Each time you press the button, the adjustment
indication on the display changes as follows:
2 3
ENTER
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
VOLUME
TOP MENU MENU
RETURN MUTING
SOUND
SOUND
SETTING
PRO LOGIC
TEST
1
PTY –
2
3
PTY +
REAR
: To adjust the output level for rear
PTY SEARCH
4
5
6
speakers (from –6 dB to +6 dB).
7
SLOW
8
9
SETUP
SW (Subwoofer) : To adjust the output level for subwoofer
(from –6 dB to +6 dB).
0
ZOOM
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
• “REAR 0dB” and “SW 0dB” are the initial setting. If you
have already changed the setting, another value will
appear.
CLEAR
SEARCH
REMAIN
SLEEP
2) Press 3 or 2 to adjust the
output level.
3 : Increases the output level.
2 : Decreases the output level.
ENTER
3 To adjust the output balance for the front
speakers and the rear speakers
3) Repeat 1) and 2) for setting
the other speakers.
1) Press SOUND repeatedly until one of
the following adjustment indications
appears on the display.
SOUND
• Each time you press the button, the adjustment indication
on the display changes as follows:
00 F 00
00 R 00
CEN
Normal indication
(canceled)
SW
REAR
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
speakers.
• “00 F 00” and “00 R 00” are the initial setting (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
2) Press 3 or 2 to adjust the
output balance.
3 : Decreases the left speaker
ENTER
output, or restores the right
speaker output.
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes
from OFF (silence), –06 (most reduction) to 00 (no
reduction).
3) Repeat 1) and 2) for setting the other speaker.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Introduction—DVD/VCD/CD
This system has been designed to play back the following discs: DVD,
If “
” appears on the TV screen when pressing a button,
Video CD, Super Video CD (SVCD), Audio CD, CD-R, and CD-RW.
• This system can also play back MP3 files recorded on CD-Rs and
CD-RWs. For in-depth information about what MP3 is, see “MP3
Introduction” on page 40.
the disc cannot accept an operation you have tried to do, or
information required for that operation is not recorded in the disc.
NOTICE : In some cases, without showing “
will not be accepted.
,” operations
Discs you can play:
Disc structure—DVD, Video CD (VCD/SVCD) andAudio CD (CD)
A DVD disc consists of Titles, and each title may be divided into
some Chapters. (See Example 1.)
Disc
Type
Mark
(Logo)
Video
Format
Region Code
Number*
For example, if a DVD disc contains some movies, each movie may
have its own title number, and it may be further divided into some
chapters.
On the other hand, a VCD/SVCD or CD consists of Tracks. (See
Example 2.)
DVD
Video
2
ALL
In general, each song has its own track number. (On some discs,
each track may also be divided by Indexes.)
When playing back a VCD/SVCD with Playback Control (PBC)
function, you can select what to view using the menu shown on the
TV screen. (While operating a Video CD using the menu, some of
the functions such as Repeat and Track Search may not work.)
Video
CD
PAL
Super
Video
CD
Example 1: DVD disc
COMPACT
Audio
CD
DIGITAL AUDIO
CD-R
CD-RW
Example 2 : Video CD/Audio CD
• On some DVD or VCD/SVCD discs, their actual operations
may be different from what is explained in this manual. This is
due to the disc programming and disc structure, but not a
malfunction of this system.
• The following discs cannot be played back:
– DVD-Audio, DVD-ROM, DVD-RAM, DVD-R,
DVD-RW, CD-ROM, CD-I, (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the
speakers.
Notes on CD-R and CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be
played back only if they are already “finalized.”
• The system can play back CD-Rs or CD-RWs recorded on a
personal computer if they have been recorded in the audio CD
format or recorded in MP3 format (see page 40).
However, they may not be played back depending on their
characteristics or recording conditions.
* Note on Region Code
DVD players and DVD Video discs have their own Region Code
numbers. This system only can play back DVD discs whose Region
Code numbers include “2.”
Examples:
• Before playing back CD-Rs or CD-RWs, read their instructions or
cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them, or if
the built-in lens is dirty.
• CD-RWs may require a longer readout time. This is caused by the
fact that the reflectance of CD-RWs is lower than for regular CDs.
If a DVD with the inadequate Region Code numbers is loaded,
“REGION ERR” appears on the display and playback cannot
start.
IMPORTANT: Before performing any operations, make sure of
the following....
• Check the connection with the TV.
• Turn on the TV and select the correct input on the TV to view the
pictures or on-screen indications on the TV screen.
• For DVD playback, you can change the Setup menu setting to
your preference. (See pages 50 to 53.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Disc Operations
To stop playback for a moment
TUNER PRESET
Press 3/8.
STANDBY/ON
AUDIO
While pausing, minute and second digit
of elapsed playing time flashes on the display.
• To resume play, press 3/8.
RDS
DISPLAY
TV
VCR
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
DISPLAY
To go to another chapter or track
Press ¢ or 4 repeatedly during playback.
SUBTITLE
FM MODE
TV VOLUME
• ¢ : Skips to the beginning of the next or succeeding chapter or
track.
• 4 : While a DVD, a VCD with PBC or MP3 is played back
Goes back to the beginning of the previous chapter or track.
VCR
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
4
7
DOWN
UP
FF
¢
REW
VCR CHANNEL
TUNING
3/8
While a CD or a VCD without PBC is played back
Goes back to the beginning of the current or previous track.
B.SEARCH
F.SEARCH
ENTER
To go to another title (only possible on a DVD)
or track (only possible on a CD and VCD)
directly using the number buttons
Pressing the number buttons before or during play allows you to
start playing the title/track number you want. (If your TV is turned
on, the on-screen bar is pulled down automatically on the TV
screen.)
SVCD can be operated by using the VCD operation
procedure.
To start playback
TUNER PRESET
• To select number 1 to 9, press the corresponding number button
(then press ENTER or wait for 5 seconds).
• To select number 15, press 1, 5.
Press 3/8.
The source is automatically changed to the
DVD player.
• To select number 23, press 2, 3.
“WAIT” appears on the display for a while,
then the detected disc type appears—DVD, VCD, CD, or MP3. (If
your TV is turned on, the mark corresponding to the detected disc
type appears on the TV screen.)
To stop during playback
Press 7.
TUNER PRESET
• When a disc is not loaded, “NO DISC” appears on the display.
(If your TV is turned on, “
STOP” appears
on the TV screen.)
• When an MP3 disc is played back, playback
stops completely.
• This system can memorize the end point even when you press 7.
When you start playback again by pressing 3/8, playback begins
from where it has been stopped—Resume play.
• To stop completely, press 7 twice. (“7 STOP” appears on the TV
screen.) The disc type appears on the display.
The DVD player goes on working for 3 minutes after playback
stops.
Disc play starts from the first chapter or track of the selected disc.
• If a menu appears while playing a DVD or VCD with PBC
function, see “Disc Menu-Driven Playback” (for DVD) on page 29
or “Disc Menu-Driven Playback (Only for VCD)” on page 35.
Note:
If “WRONG PARENTAL CODE” appears on the TV screen, Parental
Lock is in use.You cannot play back a DVD containing violent scenes
or those not suitable for your family members.
To play back such a disc, cancel the Parental Lock. (See page 53.)
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
Playback information on the display
DVD
To close the disc tray, press 0 again.
• If you do not press the button, the disc tray closes automatically
3 minutes after.
Title No.
Chapter No. Elapsed playing
time
VCD/CD
MP3
Track No.
Track No.
Elapsed playing
time
Elapsed playing
time
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Some DVDs contain several audio languages, subtitles, and multi-
angle views.
When you find the following marks on the DVD or its package, you
can select these elements recorded on the DVD.
1
2
3
4
5
6
7
8
9
Subtitles are recorded on the disc. The number
3
inside the mark indicates the total number of the
recorded subtitles.
Several audio languages are recorded on the disc.
The number inside the mark indicates the total
number of the recorded audio languages.
On-screen bar goes off.
3
Multi-angle views are recorded on the disc. The
number inside the mark indicates the total number
of the recorded multi-angle views.
1 : Disc type
DVD
VCD
SVCD
CD
MP3
3
2 : Current title and total number of the titles on the
disc
If you cannot find out whether your disc contains these features
listed above, you can check it by showing the on-screen bar.
• Ex.: 1st title is playing out of 3 titles recorded.
3 : Current chapter and total number of the chapters
in the current title
For basic disc operations such as inserting a disc, starting
playback, and moving to another chapters, see “Basic DVD
Operations” on pages 10, 11, and “Basic Disc Operations” on
page 26.
• Ex.: 1st chapter is playing out of 5 chapters recorded.
4 : Elapsed playing time or remaining time
You can change the play time indication by pressing
REMAIN. See page 29 for more details.
5 : Subtitle language indication
• Ex.: When no subtitle is recorded on the disc.
See page 28 for more details.
Showing the On-Screen Bar
You can show the following information on the TV screen while a
disc is loaded.
6 : Audio language indication
• Ex.: Original sound (default) is selected out of 3 audio
languages recorded. See page 28 for more details.
From the remote control ONLY:
DISPLAY
7 : Signal format indicator
Press DISPLAY.
• Each time you press the button, the following on-screen
bar appears in sequence.
• Signal format type—Linear PCM (stereo), Dolby Digital,
and DTS Digital Surround—will be indicated.
Ex.: When the disc is encoded with Dolby Digital.
8 : Repeat mode indicator
• Ex.: When repeat mode is turned off.
See page 30 for more details.
9 : Multi-angle view indicator
• Ex.: When only a single angle-view is recorded on the
disc. See page 28 for more details.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Selecting the Audio Languages
STANDBY/ON
AUDIO
While playing back a DVD containing audio languages (sound
track), you can select the language (sound track) to listen to.
• You can set your favorite audio language as the initial audio
language. (See page 50.)
RDS
TV
VCR
TV/VIDEO
DISPLAY
TV CHANNEL
DISPLAY STEP
AUDIO/
AUDIO/
FM MODE
SUBTITLE
FM MODE
TV VOLUME
AUDIO/
SUBTITLE
Press AUDIO/FM MODE.
FM MODE
VCR
The on-screen bar appears on the TV screen for a while.
• Each time you press the button, the audio language
changes as follows:
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
ENG 1/3 ENG 1/3
1/1
B.SEARCH
F.SEARCH
3/2/5/∞
ENTER
ENG 1/3
FRE 2/3
SPA 3/3
ENTER
VOLUME
TOP MENU MENU
RETURN MUTING
TOP MENU
MENU
Ex.: When the disc has 3 selections—English,
French, and Spanish
SOUND
Number
buttons
1
2
3
SETTING
PTY +
PTY –
PTY SEARCH
4
5
6
PRO LOGIC
7
8
9
SLOW
SETUP
TEST
0
ZOOM
Selecting the Multi-Angle Views
ANGLE
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
While playing back a DVD containing multi-angle views, you can
view the same scene at different angles.
REMAIN
CLEAR
CLEAR
SEARCH
REMAIN
SLEEP
• When you play back the DVD containing multi-angle views,
appears on the TV screen.
SEARCH
From the remote control ONLY:
ANGLE
Press ANGLE.
• Each time you press the button, the view angle changes.
Selecting the Subtitles
While playing back a DVD containing subtitles in different
languages, you can select the subtitle to be displayed on the TV
screen.
ANGLE
1
ANGLE
2
• You can set your favorite subtitle language as the initial language
shown on the screen. (See page 50.)
From the remote control ONLY:
SUBTITLE
ANGLE
3
Press SUBTITLE.
The on-screen bar appears on the TV screen for a while.
• Each time you press the button, the subtitle language
changes as follows:
Ex.: When the disc has 3 multi-angle views
OFF /3
DEF 1/3
1/1
Note:
When the on-screen bar is shown on the TV screen, Multi-angle view
indication also changes as follows:
OFF /3
SPA 3/3
ENG 1/3
FRE 2/3
1/3
2/3
Ex.: When the disc has 3 selections—English,
French, Spanish and no subtitle (OFF)
3/3
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Remaining Time
Moving to a Particular Portion Directly
While playing back a DVD, you can check the remaining time to be
played back.
You can move to another title, chapter, or particular scene in the
chapter directly.
From the remote control ONLY:
From the remote control ONLY:
REMAIN
Press REMAIN.
The on-screen bar and the current play time indication
appear on the TV screen for a while.
SEARCH
1 Press SEARCH during playback or pause.
• Each time you press the button, the following
indication appears on the screen:
• Each time you press the button, the following indication appears
on the screen:
TITLE – –
CHAPTER – – –
CHAPTER TIME
REMAIN TIME:TITLE
Canceled
TIME – – : – – : – –
TITLE TIME
REMAIN TIME:CHAPTER
TITLE – –
: Select this to move to another title.
REMAIN TIME:TITLE
: Select this to show the remaining time of the current title.
CHAPTER TIME
CHAPTER – – – : Select this to move to another chapter.
TIME – – : – – : – – : Select this to move to a particular scene.
: Select this to show the elapsed playing time of the current
chapter.
REMAIN TIME:CHAPTER
: Select this to show the remaining time of the current chapter.
TITLE TIME
: Select this to show the elapsed playing time of the current title.
2 Press the number buttons to
1
4
7
2
5
8
0
3
6
9
select a desired title, chapter, or
playing time.
The unit starts playback of the selected
item. (The on-screen bar appears for a
while.)
Disc Menu-Driven Playback
Disc menu-driven playback is possible while playing back a DVD
with menu (menu may be still pictures or moving pictures
depending on the disc).
• When operating a disc using the disc menu, refer also to the
instructions supplied for the disc.
How to input the title and chapter number
Press the number buttons corresponding to the number, then wait
for about 5 seconds or press ENTER to start playback.
• To select number 5, press 5, then ENTER.
• To select number 12, press 1, 2, then ENTER.
• To select number 22, press 2, 2, then ENTER.
DVD discs generally have their own menus or title lists. A menu
usually contains various information about the disc and playback
selections. On the other hand, a title list usually contains titles of
movies and songs recorded.
How to input the playing time
Press the number buttons to input the playing time, then wait for
about 5 seconds or press ENTER to start playback at the selected
elapsed playing time.
• To input time “00:45:23,” press 4, 5, 2, 3.
• To input time “01:23:45,” press 1, 2, 3, 4, 5.
• To cancel a mis-entry, press CLEAR.
From the remote control ONLY:
TOP MENU MENU RETURN MUTING
1 Press MENU or TOP
MENU.
A menu or title list will
TOP MENU MENU RETURN MUTING
appear on the screen.
Each time you press the button, the last entry will be erased.
“MENU” appears on the
display.
Note:
• On some DVDs, a menu
will automatically appear on the screen after playback starts.
When you want to move to another title directly, you can move to it by
simply pressing the corresponding number buttons (without pressing
SEARCH in step 1).
2 Select a desired item on the menu or on the title
list, using 3/2/5/∞ and ENTER.
The unit starts playback of the selected
item.
• On some discs, you can also select
items by pressing the number buttons
corresponding to the item numbers
ENTER
listed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
To reverse the chapter—Variable Speed Reverse
Search
STANDBY/ON
AUDIO
From the remote control ONLY:
Press 1 during playback or pause.
• Each time you press the button, the search speed
RDS
DISPLAY
TV
VCR
TV/VIDEO
B.SEARCH
changes as follows:
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
x2
x4
x8
VCR
DVD
FM/AM
AUX
CONTROL
PLAY (Back play)
TUNER PRESET
DOWN
UP
FF
3/8
TUNER PRESET
REW
To resume normal play
Press 3/8.
VCR CHANNEL
TUNING
1
¡
B.SEARCH
F.SEARCH
2 3
ENTER
ENTER
Repeating Playback
Repeat play cannot be used in the following cases:
• When you enjoy program play
VOLUME
TOP MENU MENU
RETURN MUTING
SOUND
7 Repeat Play
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
From the remote control ONLY:
6
REPEAT
Press REPEAT repeatedly.
7
SLOW
8
9
SETUP
The indication corresponding to the selected mode appears
on your TV.
0
ZOOM
ANGLE
D.R.C
DSP MODE
REPEAT
PROGRAM
• Each time you press the button, Repeat mode changes as follows:
REPEAT:CHAPTER REPEAT:TITLE
REPEAT OFF
REPEAT:CHAPTER : Current chapter will be repeated.
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
A-B REPEAT
REPEAT:TITLE
REPEAT OFF
: Current title will be repeated.
: Repeat play is canceled. (Normal play
is resumed.)
Searching for a Particular Point
You can search for a particular portion while playing a disc—
Variable Speed Forward/Reverse Search.
• No sound comes out during Variable Speed Forward/Reverse
Search.
Note:
When the on-screen bar is shown on the TV screen, repeat mode
indication also changes as follows:
To fast-forward the chapter—Variable Speed
Forward Search
From the remote control ONLY:
REPEAT:CHAPTER
REPEAT:TITLE
Press ¡ during playback or pause.
• Each time you press the button, the search speed
REPEAT OFF
F.SEARCH
changes as follows:
7 A–B Repeat
While playing, you can also select a portion you want to repeat.
• A–B repeat is not performed between different titles.
• An interval of more than 5 seconds is required between point A
and point B.
x2
x4
x8
PLAY (Normal play)
Example:
REPEAT:A–
REPEAT:A–B
30
Download from Www.Somanuals.com. All Manuals Search And Download.
From the remote control ONLY:
3 Press ENTER.
PROGRAM MENU
A-B REPEAT
A-B REPEAT
1 Press A–B REPEAT to select the start
SELECT: ENTER
TITLE CHAPT
point.
TITLE CHAPT
ENTER
“RPT A–” appears on the display and “REPEAT:A–”
appears on the TV screen.
1
2
3
4
5
––
––
––
––
––
––
––
––
––
––
6
7
8
9
––
––
––
––
––
––
––
––
––
10 ––
2 Press A–B REPEAT again to select the
CHOOSE : 1–5
PREVIOUS
NEXT
end point.
“RPT A–” changes to “RPT A–B” and “REPEAT:A–” changes
to “REPEAT:A–B,” then A–B repeat begins.
The unit automatically locates point A and starts repeated
playback between points A and B.
PLAY: 3
FINISH: PROGRAM
Title numbers you can select in the next step
4 Press 3 or 2 to select a title
A-B REPEAT
To cancel A–B Repeat
Press A–B REPEAT again.
“RPT OFF” appears on the display and “REPEAT OFF”
appears on the TV screen.
number, then ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
• You can also select a title number using
the number buttons.
ENTER
Note:
PROGRAM MENU
SELECT: ENTER
When the on-screen bar is shown on the TV screen, Repeat mode
indication also changes as follows:
TITLE CHAPT
TITLE CHAPT
1
2
3
4
5
–2
––
––
––
––
––
––
––
––
––
6
7
8
9
––
––
––
––
––
––
––
––
––
10 ––
CHOOSE : 1–9
PREVIOUS
NEXT
On some DVDs, A–B Repeat may not be used even within the
same title. This is due to their disc structures, and not a
malfunction of the unit.
PLAY: 3
FINISH: PROGRAM
Chapter numbers you can select in the
next step
5 Press 3 or 2 to select a chapter number, then
ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
Programming the Playing Order of the
Chapters—Program Play
•
You can also select a chapter number using the number buttons.
You can arrange the chapter playback order before you start playing.
You can program up to 20 steps.
• Before making a program, make sure that the TV is turned on
and the correct input is selected on the TV.
SELECT: ENTER
PROGRAM MENU
TITLE CHAPT
TITLE CHAPT
1
2
3
4
5
2
– –
– –
– –
– –
8
– –
– –
– –
– –
6
7
8
9
– –
– –
– –
– –
– –
– –
– –
– –
– –
From the remote control ONLY:
10 – –
PREVIOUS
NEXT
1 Load a disc.
• If the current playing source is not the DVD player, press
3/8, then 7 before going to the next step.
FINISH: PROGRAM
PLAY: 3
• To select all chapters in the selected title as one program
step, simply press ENTER without selecting any number.
“ALL” appears on the chapter number position.
2 Press PROGRAM.
PROGRAM
The PROGRAM MENU screen appears on the TV
screen.
• “PROGRAM” appears on the display.
6 Repeat steps 3 to 5 to program other chapters
you want.
• After 10 steps are programed, “NEXT «” is selected
(highlighted). If you want to program more steps, press
ENTER.
PROGRAM MENU
TITLE CHAPT
SELECT: ENTER
TITLE CHAPT
1
2
3
4
5
––
– –
– –
– –
– –
– –
– –
– –
– –
– –
6
7
8
9
– –
– –
– –
– –
– –
– –
– –
– –
– –
TUNER PRESET
7 Press 3/8.
10 – –
The chapters are played in the order you
have programed and the PROGRAM
indicator lights up.
PREVIOUS
NEXT
PLAY: 3
FINISH: PROGRAM
After all the chapters you programed are played back, the
PROGRAM MENU screen appears on the TV screen again.
TO BE CONTINUED ON THE NEXT PAGE
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
To erase the stored program
Press 0 to eject the disc.
STANDBY/ON
AUDIO
• If you turn off the system or change the source, the
program is also erased.
RDS
DISPLAY
TV
VCR
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
STEP
To check the program contents
SUBTITLE
FM MODE
TV VOLUME
You can check the program contents by pressing PROGRAM.
The PROGRAM MENU screen appears on the TV screen.
• If you press the button during playback, the program play will
stop.
VCR
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
7
3/8
REW
VCR CHANNEL
TUNING
To modify the program
B.SEARCH
F.SEARCH
You can modify the program while the PROGRAM MENU screen is
shown on the TV screen.
3/2/5/∞
ENTER
ENTER
• To erase a step: Press ∞ (or 5) to select (highlight) an unwanted
program step, then press CLEAR.
VOLUME
• To modify a step: Press ∞ (or 5) to select (highlight) a program
step you want to modify, then perform steps 3 to 5 on page 31.
(Before entering a new number, press CLEAR repeatedly until
“– –” appears on the number entry position.)
TOP MENU MENU
RETURN MUTING
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
• To add a step: Press ∞ (or 5) to select (highlight) an empty
program step, then perform steps 3 to 5 on page 31.
7
8
9
SETUP
SLOW
SLOW
0
ZOOM
ANGLE
ZOOM
D.R.C
DSP MODE
• To move program step 11 to program step 10, press 5 when
program step 11 is selected (highlighted) so that
REPEAT A-B REPEAT PROGRAM
PROGRAM
CLEAR
CLEAR
SEARCH
REMAIN
SLEEP
“PREVIOUS »” is selected (highlighted). Then, press ENTER.
• To move program step 10 to program step 11, press ∞ when
program step 10 is selected (highlighted) so that “NEXT « ” is
selected (highlighted). Then, press ENTER.
To stop during playback
TUNER PRESET
Press 7 or PROGRAM on the remote
control.
The PROGRAM MENU screen appears on the
TV screen.
• If you press 3/8 while this screen is
shown, the unit starts program play.
SELECT: ENTER
TITLE CHAPT
PROGRAM MENU
TITLE CHAPT
1
2
3
4
5
2
1
1
3
4
8
5
1 7
6
6
7
8
9
2
2
1
2
12
9
––
10 ––
––
––
2
PREVIOUS
NEXT
FINISH: PROGRAM
PLAY: 3
To exit from program play
From the remote control ONLY:
Press PROGRAM.
PROGRAM
The PROGRAM MENU screen goes off, and the
opening screen appears. (The program you made is still
kept in memory.)
• If you press 3/8 while this screen is
shown, the unit starts normal playback.
DVD/Video CD/CD PLAYER
32
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Zoom
DVD Special Effect Playback
You can zoom in on the picture while playing back a DVD.
7 Still Picture/Frame-by-Frame Playback
You can advance the still picture frame by frame while playing a
DVD.
From the remote control ONLY:
ZOOM
1 Press ZOOM to zoom in.
• Each time you press the button, the picture is
enlarged as follows:
From the remote control ONLY:
1 Press STEP once during playback.
STEP
A still picture appears on the TV screen.
2
4
8
PAUSE
2x Zoom
4x Zoom
Canceled
2 Press 3/2/5/∞ to move the
enlarged portion you want to
watch.
ENTER
STEP
2 Press STEP repeatedly to advance the
picture frame by frame.
• Each time you press the button, the picture advances
frame by frame.
ENTER
2
3 8
3 8
3 8
3 8
3 8
3 8
ENTER
To cancel the ZOOM
Press ZOOM repeatedly until the normal size picture is
resumed.
ZOOM
To resume normal play
Press 3/8.
TUNER PRESET
7 Slow Motion Playback
You can enjoy slow motion playback while playing a DVD.
From the remote control ONLY:
SLOW
Press SLOW repeatedly during playback or pause.
• Each time you press the button, slow motion speed
changes as follows:
SLOW 1
/
SLOW 1
/
4
2
(Normal play)
PLAY
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
*
1
2
3
4
5
6
STANDBY/ON
AUDIO
1/35
00:12
RDS
DISPLAY
TV
VCR
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
DISPLAY
**
7
On-screen bar goes off.
SUBTITLE
FM MODE
TV VOLUME
*
Appears only when a VCD is loaded.
VCR
3/8
¢
¡
DVD
FM/AM
AUX
CONTROL
** Appears only when a VCD is played back.
TUNER PRESET
1 : Disc type
DVD
4
1
DOWN
UP
FF
VCD
SVCD
CD
MP3
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
2 : Current track and total number of the tracks on
the disc
ENTER
ENTER
• Ex.: 1st track is playing out of 35 tracks recorded.
3 : Sound mode
• Ex.: Stereo sound (Left channel and Right channel).
VOLUME
4 : Play Back Control (PBC) indicator
TOP MENU MENU
RETURN MUTING
MENU
RETURN
• Ex.: PBC is on. (When PBC is turned off,
will
appear.)
SOUND
Number
buttons
1
2
3
SETTING
PTY +
PTY –
PTY SEARCH
5 : Repeat mode indicator
4
5
6
• Ex.: When repeat mode is turned off. See page 36 for more
PRO LOGIC
7
SLOW
8
9
SETUP
details.
TEST
0
ANGLE
ZOOM
D.R.C
DSP MODE
6 : Elapsed playing time or remaining time
You can change the play time indication by pressing
REMAIN. See below.
REPEAT A-B REPEAT PROGRAM
CLEAR
REMAIN
CLEAR
SEARCH
REMAIN
SLEEP
7 : Sound indication
SEARCH
• Indicates sound input level. (Appears only during playback
VCD.)
Checking the Remaining Time
• SVCD can be operated by using the VCD operation
procedure.
• For basic disc operations such as inserting a disc, starting
playback, and moving to another tracks, see “Basic VCD/
CD Operations” on pages 12, 13, and “Basic Disc
Operations” on page 26.
While playing back a VCD or CD, you can check the remaining
time.
From the remote control ONLY:
REMAIN
Press REMAIN.
The on-screen bar appears on the TV screen for a while.
• Each time you press the button, the play time indication
changes as follows:
Showing the On-Screen Bar
REMAIN TIME:TRACK
DISC TIME
You can show the following information on the TV screen while a
disc is loaded.
TRACK TIME
REMAIN TIME:DISC
From the remote control ONLY:
REMAIN TIME:TRACK
: Select this to show the remaining time of the current track.
DISC TIME
: Select this to show the total elapsed playing time of the disc.
REMAIN TIME:DISC
DISPLAY
Press DISPLAY.
• Each time you press the button, the following on-screen
bar appears in sequence.
: Select this to show the total remaining time of the disc.
TRACK TIME
: Select this to show the elapsed playing time of the current
track.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Menu–Driven Playback (Only for VCD)
Moving to a Particular Portion Directly
The Play Back Control function (PBC) allows you to operate the
VCD using menus.
You can move to a particular portion (scene) on the track directly.
• PBC function is canceled when you use this function.
When you start playing a VCD with PBC function, a menu will
automatically appear on the TV screen. (“MENU” will also appear
on the display.)
• A menu may be a list of items, divided screens, or some moving
pictures. (See “PBC operation concept” below.)
From the remote control ONLY:
SEARCH
1 Press SEARCH during playback or pause.
• Each time you press the button, the following
indication appears on the TV screen.
When a menu appears, you can select a desired item on the menu.
• When a list of items is displayed on the TV screen, press the
number buttons to select an item.
• When “3” or “SELECT” is displayed on the TV screen, press
3/8 to start playback.
– –
– – :
TIME – – : – –
TRACK TIME
Canceled
TIME – – : – –
: Select this to move to a particular portion on
the current disc.
TRACK TIME – – : – –
: Select this to move to a particular portion on
UP
To go to the next submenu
Press ¢.
FF
the current track.
To return to the previous submenu
DOWN
2 Press number buttons to select
Press 4.
1
4
7
2
5
8
0
3
6
9
REW
a playing time you want to
To cancel the PBC playback
You can cancel the menu-driven operations (PBC function):
1 Press 7 to stop playback.
2 Press the number buttons to
search for.
The unit starts playback at the selected
elapsed playing time. (The on-screen
bar appears for a while.)
TOP MENU MENU RETURN MUTING
select a track.
Normal playback starts from the
selected track.
• To input time “45:23,” press 4, 5, 2, 3.
• To input time “09:45,” press 9, 4, 5, then wait for about 5
seconds (or press ENTER).
• You can also turn on and off the PBC function by pressing
MENU on the remote control. Each time you press the button,
the PBC function turns on and off.
• To cancel a misentry, press CLEAR.
Each time you press the button, the last entry will be erased.
PBC operation
concept
Searching for a Particular Point
You can search for a particular portion while playing a disc—
Variable Speed Forward/Reverse Search.
• No sound comes out during Variable Speed Forward/Reverse
Search on a VCD.
To fast-forward the tracks—Variable Speed
Forward Search
Press ¡ during playback or pause.
• Each time you press the button, the search speed
changes as follows:
F.SEARCH
Note:
x2
x4
x8
While operating a VCD using menu, some of the functions such as
repeat play may not work.
PLAY (Normal play)
To reverse the tracks—Variable Speed Reverse
Search
Press 1 during playback or pause.
• Each time you press the button, the search speed
changes as follows:
B.SEARCH
x2
x4
x8
PLAY (Normal play)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
Note:
When the on-screen bar is shown on the screen, Repeat mode
indication also changes as follows:
STANDBY/ON
AUDIO
RDS
DISPLAY
TV
VCR
TV/VIDEO
REPEAT:ONE REPEAT:DISC
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
REPEAT OFF
VCR
DVD
FM/AM
AUX
CONTROL
7 A–B Repeat
TUNER PRESET
7
DOWN
UP
FF
3/8
While playing, you can also select a portion you want to repeat.
• An interval of more than 5 seconds is required between point A
and point B.
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
2 3
ENTER
Example:
ENTER
REPEAT:A–
VOLUME
TOP MENU MENU
RETURN MUTING
SOUND
REPEAT:A–B
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
7
SLOW
8
9
SETUP
From the remote control ONLY:
0
ANGLE
ZOOM
D.R.C
DSP MODE
1 Press A–B REPEAT to select the start
A-B REPEAT
PROGRAM
REPEAT
REPEAT A-B REPEAT PROGRAM
point.
CLEAR
SEARCH
REMAIN
SLEEP
“RPT A–” appears on the display and “REPEAT:A–”
appears on the TV screen.
A–B REPEAT
2 Press A–B REPEAT again to select the
A-B REPEAT
end point.
“RPT A–” changes to “RPT A–B” and “REPEAT:A–
” changes to “REPEAT:A–B,” then A–B repeat begins.
The unit automatically locates point A and starts repeated
playback between points A and B.
Repeating Playback
Repeat play cannot be used in the following cases:
• When you play back a VCD using the PBC function
• When you enjoy program play
To cancel A–B Repeat
Press A–B REPEAT again.
“RPT OFF” appears on the display and “REPEAT OFF”
A-B REPEAT
7 Repeat Play
From the remote control ONLY:
appears on the TV screen.
REPEAT
Press REPEAT repeatedly.
The indication corresponding to the selected mode appears
on your TV.
Note:
• Each time you press the button, repeat mode changes as follows:
REPEAT:ONE REPEAT:DISC
REPEAT OFF
When the on-screen bar is shown on the TV screen, repeat mode
indication also changes as follows:
REPEAT:ONE
REPEAT:DISC
REPEAT OFF
: Current track will be repeated.
: All the tracks will be repeated.
: Repeat play is canceled. (Normal play is
resumed.)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Playing Order of the
Tracks—Program Play
5 Repeat steps 3 and 4 to program other tracks
you want.
• After 10 steps are programed, “NEXT «” is selected
(highlighted). If you want to program more steps, press
ENTER.
You can arrange the track playback order before you start playing.
You can program up to 20 steps.
• Before making a program, make sure that the TV is turned on
and the correct input is selected on the TV.
TUNER PRESET
6 Press 3/8.
The tracks are played in the order you have
programed and the PROGRAM indicator
lights up.
From the remote control ONLY:
1 Load a disc.
After all the tracks you programed are played back, the
PROGRAM MENU screen appears on the TV screen again.
• If the current playing source is not the DVD player, press 3/8
to select the disc you want to play, then 7 before going to the
next step.
To stop during play
Press 7 or PROGRAM on the remote
control.
The PROGRAM MENU screen appears on
the TV screen.
• If you press 3/8 while this screen is
PROGRAM
2 Press PROGRAM.
TUNER PRESET
The PROGRAM MENU screen appears on the TV
screen.
• “PROGRAM” appears on the display.
PROGRAM MENU
SELECT: ENTER
PROGRAM MENU
TRACK
SELECT: ENTER
TRACK
shown, the system starts program play.
TRACK
TRACK
1
2
3
4
5
7
6
9
1 3
1 1
6
7
8
9
1
– –
– –
– –
1
2
3
4
5
– –
– –
– –
– –
– –
6
7
8
9
– –
– –
– –
– –
10 – –
PREVIOUS
NEXT
10 – –
PLAY: 3
FINISH: PROGRAM
PREVIOUS
NEXT
To exit from program play
From the remote control ONLY:
PLAY: 3
FINISH: PROGRAM
Press PROGRAM.
PROGRAM
3 Press ENTER.
The PROGRAM MENU screen goes off,
and the opening screen appears. (The
program you made is still kept in memory.)
• If you press 3/8 while this screen is
shown, the unit starts normal playback.
SELECT: ENTER
TRACK
PROGRAM MENU
TRACK
ENTER
1
2
3
4
5
– –
– –
– –
– –
– –
6
7
8
9
– –
– –
– –
– –
DVD/Video CD/CD PLAYER
10 – –
CHOOSE : 1–17
PREVIOUS
NEXT
To erase the stored program
PLAY: 3
FINISH: PROGRAM
Press 0 to eject the disc.
• If you turn off the system or change the source, the
program is also erased.
Track numbers you can select in the
next step
4 Press 3 or 2 to select a track
number, then ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
• You can also select a track number
using the number buttons.
To check the program contents
You can check the program contents by pressing
PROGRAM. The PROGRAM MENU screen appears on
the TV screen.
ENTER
PROGRAM
• If you press the button during playback, the program
play will stop.
PROGRAM MENU
TRACK
SELECT: ENTER
TRACK
1
2
3
4
5
7
– –
– –
– –
– –
6
7
8
9
– –
– –
– –
– –
10 – –
TO BE CONTINUED ON THE NEXT PAGE
PREVIOUS
NEXT
PLAY: 3
FINISH: PROGRAM
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD/CD Playback
Selecting Playback Channel
STANDBY/ON
AUDIO
When you play back a karaoke VCD or CD, you can only select
either the left channel or right channel to listen to.
RDS
DISPLAY
TV
VCR
TV/VIDEO
AUDIO/
FM MODE
Press AUDIO/FM MODE repeatedly.
The on-screen bar appears on the screen for a while.
TV CHANNEL
DISPLAY STEP
AUDIO/
STEP
AUDIO/
FM MODE
SUBTITLE
FM MODE
TV VOLUME
• Each time you press the button, the sound mode changes as
follows:
VCR
DVD
FM/AM
AUX
CONTROL
AUDIO:LEFT
AUDIO:RIGHT
TUNER PRESET
3/8
DOWN
UP
FF
REW
AUDIO:STEREO
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
3/2/5/∞
ENTER
1/35
00:12
ENTER
VOLUME
TOP MENU MENU
RETURN MUTING
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
AUDIO:STEREO (LR) : Select this to listen to both
SETTING
PRO LOGIC
TEST
6
channel sounds.
7
SLOW
8
9
SETUP
AUDIO:LEFT (L)
AUDIO:RIGHT (R)
: Select this to listen to the left
channel sounds.
: Select this to listen to the right
channel sounds.
SLOW
0
ZOOM
ZOOM
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
CLEAR
CLEAR
SEARCH
REMAIN
SLEEP
REMEMBER that after playing back a karaoke VCD or CD
using “AUDIO:LEFT” or “AUDIO:RIGHT,”
select “AUDIO:STEREO” to restore normal stereo playback.
To modify the program
You can modify the program while the PROGRAM MENU screen is
shown on the TV screen.
• To erase a step: press ∞ (or 5) to select (highlight) an unwanted
program step, then press CLEAR.
• To modify a step: press ∞ (or 5) to select (highlight) an program
step you want to modify, then perform steps 3 and 4. (Before
entering a new number, press CLEAR repeatedly until “– –”
appears on number entry position.)
• To add a step: press ∞ (or 5) to select (highlight) an empty
program step, then perform steps 3 and 4.
• To move program step 11 to program step 10, press 5 when
program step 11 is selected (highlighted) so that
“PREVIOUS » ” is selected (highlighted). Then, press
ENTER.
• To move program step 10 to program step 11, press ∞ when
program step 10 is selected (highlighted) so that “NEXT « ” is
selected (highlighted). Then, press ENTER.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Zoom
VCD Special Effect Playback
You can zoom in on the picture while playing a VCD.
7 Still Picture/Frame-by-Frame Playback
You can advance the still picture frame by frame while playing a
VCD.
From the remote control ONLY:
ZOOM
1 Press ZOOM to zoom in.
• Each time you press the button, the picture is
enlarged as follows:
From the remote control ONLY:
1 Press STEP once during playback.
STEP
A still picture appears on the TV screen.
2
8
PAUSE
2x Zoom
Canceled
2 Press 3/2/5/∞ to move the
enlarged portion you want to
watch.
ENTER
2 Press STEP repeatedly to advance the
STEP
picture frame by frame.
• Each time you press the button, the picture advances
frame by frame.
ENTER
2
3 8
3 8
3 8
3 8
3 8
3 8
ENTER
To cancel the ZOOM
Press ZOOM again.
To resume normal play
ZOOM
TUNER PRESET
The normal size picture is resumed.
Press 3/8.
7 Slow Motion Playback
You can enjoy slow motion playback while playing a VCD.
From the remote control ONLY:
SLOW
Press SLOW repeatedly during playback or pause.
• Each time you press the button, slow motion speed
changes as follows:
SLOW 1
/
2
SLOW 1
/
4
SLOW 1
/
8
PLAY
SLOW 1
/
16
(Normal play)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Introduction
This system is incorporated with an MP3 decoder. You can play
back MP3 tracks (files) recorded on CD-Rs and CD-RWs.
• Notice that “files” and “tracks” are used interchangeably.
STANDBY/ON
AUDIO
What is MP3?
RDS
TV
VCR
TV/VIDEO DISPLAY
MP3 is an abbreviation of Motion Picture Experts Group (or MPEG)
Audio Layer 3. MP3 is simply a file format with a data compression
ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one
CD-R or CD-RW can contain 10 times as much data volume as a
regular CD can.
TV CHANNEL
DISPLAY STEP
AUDIO/
DISPLAY
SUBTITLE
FM MODE
TV VOLUME
VCR
AUX
DVD
FM/AM
CONTROL
* Bit rate is the average number of bits that one second of audio data
will consume. The measuring unit used is Kbps (1000 bits per
second).
To get a better audio quality, choose a higher bit rate. The most
popular bit rate for encoding (recording) is 128 Kbps.
4
7
TUNER PRESET
¢
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
3/8
B.SEARCH
F.SEARCH
MP3 File Compatibility
ENTER
ENTER
• This system can only read MP3 files that are recorded in the
format that is compliant with ISO 9660 Level 1 or Level 2.
• The system can read or play MP3 files only with the extension
code—“.mp3”.
VOLUME
TOP MENU MENU
RETURN MUTING
• ID3* tags cannot be shown on the display.
SOUND
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There are
two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag
version 2).
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
6
7
SLOW
8
9
SETUP
0
ANGLE
ZOOM
D.R.C
DSP MODE
Disc structure—How are MP3 files recorded
REPEAT A-B REPEAT PROGRAM
and played back?
CLEAR
SEARCH
REMAIN
SLEEP
“MP3 files (tracks)” can be recorded in “directories (or folders),” in
PC terminology.
During recording, the files and directories can be arranged in a way
similar to arranging files and folder/directories of computer data.
“Root” is similar to the root of a tree. Every file and directory can be
linked to the root.
In compliance with ISO 9660, the maximum allowable depth of
nested directories—so-called “hierarchy”—is eight (inclusive of the
root).
For in-depth information about a disc to be played back, see
“Disc Introduction—DVD/VCD/CD” on page 25.
Playback order, files search order, and directory search order of the
MP3 files recorded on a disc are determined by the writing (or
encoding) application; therefore, playback order may be different
from the one you have intended while recording the folders/
directories and the files.
Note on MP3 discs
MP3 discs (either CD-R or CD-RW) require a longer readout time.
(It differs due to the complexity of the directory/file configuration.)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
The on-screen bar
Starting Playback
1
2
3
4
5
It is recommended to turn on your TV when playing back an MP3
disc.
1/35
128
00:22/03:48
1 Press 0 to load a disc.
6
1 : Disc type
DVD
VCD
SVCD
CD
MP3
TUNER PRESET
2 Press 3/8.
After detecting the disc, playback starts.
• The on-screen bar and the contents
recorded on the MP3 disc will be shown
on the TV if it is turned on.
2 : Current track (file) and total number of the tracks
on the disc
• Ex.: 1st track is playing out of 35 tracks recorded.
3 : Bit rate
5/135
?
?
• Ex.: Bit rate used for recording the loaded disc is
128 Kbps. (See the previous page.)
4 : Repeat mode indicator
• Ex.: When repeat mode is turned off.
See page 43 for more details.
SPRING
SUMMER
FALL
WINTER
LIAR.MP3
LOVE.MP3
5 : Elapsed playing time and the total playing time of
the current track
6 : Sound indication
• Indicates sound input level. (Only appears during
playback.)
5/135
?
?
To go to another track
Press ¢ or 4 during playback.
SPRING
• ¢ : Skip to the beginning of the next track.
UP
SPRING1.MP3
SPRING2.MP3
SPRING3.MP3
SPRING4.MP3
SPRING5.MP3
FF
• 4 : Skip to the beginning of the previous track.
DOWN
REW
Note:
To stop playback for a moment
Press 3/8.
TUNER PRESET
If the loaded disc is not recorded in the audio CD format or MP3
format, “WRONG DISC FORMAT” appears on the TV screen.
To resume play, press 3/8 again or ENTER.
To stop during playback
Press 7.
TUNER PRESET
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
To close the disc tray, press 0 again.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
Operations Using the On-Screen Display
STANDBY/ON
AUDIO
It is recommended to turn on your TV when playing back an MP3
disc.
RDS
TV
VCR
TV/VIDEO DISPLAY
When the loaded MP3 disc is recognized, the following on-screen
display appears on the TV screen. (The contents of this on-screen
display varies according to the disc—the way MP3 tracks were
recorded on the disc.)
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
VCR
AUX
DVD
FM/AM
CONTROL
• Only the first 8 letters of the titles appear on the TV screen.
TUNER PRESET
DOWN
UP
FF
From the remote control ONLY:
REW
VCR CHANNEL
TUNING
Button
ENTER
∞ / 5
To do
B.SEARCH
F.SEARCH
∞ 5
ENTER
ENTER
Start playback or go into a directory.
Select a track or directory.
VOLUME
TOP MENU MENU
RETURN MUTING
Number
buttons
SOUND
1
PTY –
2
3
PTY +
SETTING
PRO LOGIC
TEST
PTY SEARCH
4
5
6
7
SLOW
8
9
SETUP
0
ANGLE
ZOOM
D.R.C
DSP MODE
REPEAT
SEARCH
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
5/135
?
?
MP3 On-Screen Display Operations
SPRING
SUMMER
FALL
WINTER
LIAR.MP3
LOVE.MP3
ENTER
5
∞
∞
5
and ENTER
SPRING
SPRING
SUMMER
FALL
ENTER
ENTER
SPRING1.MP3
SPRING2.MP3
SPRING3.MP3
SPRING4.MP3
SPRING5.MP3
WINTER
LIAR.MP3
LOVE.MP3
Start playing
“SPRING1.MP3”
To “SUMMER”
5
5
∞
SPRING
SPRING
SUMMER
FALL
ENTER
ENTER
SPRING1.MP3
SPRING2.MP3
SPRING3.MP3
SPRING4.MP3
SPRING5.MP3
WINTER
LIAR.MP3
LOVE.MP3
To “FALL”
Start playing
“SPRING2.MP3”
5
5
∞
∞
SPRING
SPRING
SUMMER
FALL
ENTER
SPRING1.MP3
SPRING2.MP3
SPRING3.MP3
SPRING4.MP3
SPRING5.MP3
ENTER
WINTER
LIAR.MP3
LOVE.MP3
Start playing
Start playing
“SPRING3.MP3”
“LIAR.MP3”
Note:
If you press 2, the cursor moves to current playback track.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to a Particular Track Directly
You can move to a particular track on the disc directly.
From the remote control ONLY:
Repeating Playback
On an MP3 disc, A–B repeat cannot be used. You can enjoy only
repeat play.
SEARCH
From the remote control ONLY:
1 Press SEARCH during playback or pause.
To repeat playback—Repeat Play
“TRACK – – – – ” appears on the TV screen.
REPEAT
Press REPEAT repeatedly.
2 Press the number buttons to
The indication corresponding to the selected mode appears
on the TV screen.
• Each time you press the button, repeat mode changes as follows:
1
4
7
2
5
8
0
3
6
9
select a track number you
want.
The system starts playback from the
selected track.
REPEAT:RANDOM
REPEAT:ONE
REPEAT:DIR
• To select number 5, press 5 (then
ENTER).
REPEAT OFF REPEAT:DISC
• To select number 10, press 1, 0 (then
ENTER).
• To select number 23, press 2, 3 (then ENTER).
• To select number 123, press 1, 2, 3.
REPEAT:RANDOM
: All tracks recorded on the disc will be played once at
random (random play), and random play will be repeated.
REPEAT:ONE
Note:
: Current track will be repeated.
REPEAT:DIR
: Tracks in the current directory will be repeated.
REPEAT:DISC
When you want to move to another file (track) directly, you can move
to it simply by pressing the number buttons (without pressing
SEARCH in step 1).
: All tracks on the disc will be repeated.
REPEAT OFF
: Repeat play is canceled. (Normal play is resumed.)
Note:
When the on-screen bar is shown on the TV screen, repeat mode
indication also changes as follows:
REPEAT:RANDOM
REPEAT:ONE
REPEAT:DIR
REPEAT OFF
REPEAT:DISC
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Tuning in Stations
STANDBY/ON
AUDIO
From the remote control:
FM/AM
1 Press FM/AM repeatedly to select the
RDS
DISPLAY
TV
VCR
TV/VIDEO
band.
TV CHANNEL
The last received station of the selected band is tuned
in.
• Each time you press the button, the band alternates between
DISPLAY STEP
AUDIO/
AUDIO/
FM MODE
SUBTITLE
FM MODE
TV VOLUME
FM/AM
VCR
DVD
FM/AM
AUX
CONTROL
FM and AM.
TUNER
PRESET
DOWN
TUNER
PRESET
UP
TUNER PRESET
DOWN
UP
FF
REW
2 Press and hold
VCR CHANNEL
TUNING –
TUNING +
VCR CHANNEL
TUNING
TUNING
TUNING + or –
B.SEARCH
F.SEARCH
B.SEARCH
F.SEARCH
until you find the
frequency you want.
• TUNING + : Increases
the frequency.
ENTER
• TUNING – : Decreases the frequency.
VOLUME
TOP MENU MENU
RETURN MUTING
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
On the front panel:
SETTING
PRO LOGIC
TEST
6
SOURCE
1 Press SOURCE repeatedly until the
7
SLOW
8
9
SETUP
desired band appears on the display.
The last received station of the selected band is tuned
in.
0
ZOOM
ANGLE
D.R.C
DSP MODE
PROGRAM
REPEAT A-B REPEAT PROGRAM
• Each time you press the button, the source changes as follows:
CLEAR
SEARCH
REMAIN
SLEEP
DVD player*
AUX IN
FM
AM
* “WAIT” appears on the display.
For basic tuner operations, see “Basic Tuner Operations” on page
14.
2 Press 7 so that “MANUAL” appears on the
display.
• Each time you press the button, the operation mode of
¢ and 4 buttons alternates between “PRESET” and
“MANUAL.”
PRESET : Select this for using ¢ and 4 as the
buttons to select the preset station.
MANUAL : Select this for using ¢ and 4 as the
buttons to change the frequency manually.
3 Press and hold ¢ or 4 until
you find the frequency you want.
• ¢ : Increases the frequency.
• 4 : Decreases the frequency.
Notes:
• When a station of sufficient signal strength is tuned in, the
indicator lights up on the display.
• When an FM stereo program is received, the
indicator also
lights up.
• When you press the button repeatedly, the frequency changes step
by step.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune in a preset station
From the remote control:
Using Preset Tuning
FM/AM
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 15 FM and 15 AM stations.
1 Press FM/AM repeatedly to select the
band.
The last received station of the selected band is
tuned in.
To store the preset stations
From the remote control ONLY:
• Each time you press the button, the band alternates between
FM and AM.
1 Tune in the station you want to preset (see
“Tuning in Stations”).
2 Press TUNER PRESET UP or DOWN until the
desired preset station
TUNER PRESET
DOWN
UP
appears on the
display.
REW
FF
PROGRAM
2 Press PROGRAM.
The preset number appears on the display and the
PROGRAM indicator lights up.
• TUNER PRESET UP
: Increases the preset number.
• TUNER PRESET DOWN : Decreases the preset number.
On the front panel:
SOURCE
1 Press SOURCE repeatedly until the
desired band appears on the display.
Preset number
2 Press 7 so that “PRESET” appears on the
display.
3 Press TUNER PRESET UP or DOWN to select a
preset number.
TUNER PRESET
• Each time you press the button, the operation mode of
DOWN
UP
¢ and 4 buttons alternates between “PRESET” and
“MANUAL.”
REW
FF
PRESET : Select this for using ¢ and 4 as the
buttons to select the preset station.
MANUAL : Select this for using ¢ and 4 as the
buttons to change the frequency manually.
PROGRAM
4 Press PROGRAM to store the preset
station.
The PROGRAM indicator goes off, and the station is
assigned to the selected preset number.
3 Press ¢ or 4 repeatedly until
5 Repeat steps 1 to 4 until you store all the stations
the desired preset station appears
you want.
on the display.
• ¢ : Increases the preset number.
• 4 : Decreases the preset number.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
Selecting the FM Reception Mode
When an stereo FM program tuned currently is noisy, you can
change the FM reception mode to improve the reception.
AUDIO/
FM MODE
Press AUDIO/FM MODE.
The
indicator goes off from the display and the
program loses the stereo effect.
To resume the stereo effect, press AUDIO/FM MODE again.
The stereo effect resumes.
Note:
The FM reception mode will also resume in the following case:
• When you change the frequency, the preset number, or the band
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
What information can RDS signals provide?
You can see the following RDS signals the station sends on the
display.
STANDBY/ON
AUDIO
RDS
DISPLAY
TV
VCR
TV/VIDEO
PS NAME (Program Service):
RDS DISPLAY
TV CHANNEL
While searching, “PS NAME” appears, then the station names will
be displayed. “NO PS” appears if no signal is sent.
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
RT (Radio Text):
VCR
DVD
FM/AM
AUX
CONTROL
While searching, “RT” appears, then text messages the station sends
will be displayed. “NO RT” appears if no signal is sent.
TUNER PRESET
DOWN
UP
FF
CT (Clock Time):
REW
While searching, “CT” appears, then clock signals the station sends
will be displayed. “NO CT” appears if no signal is sent.
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
Frequency:
Station frequency (non-RDS service)
ENTER
From the remote control ONLY:
VOLUME
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
TOP MENU MENU
RETURN MUTING
SOUND
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
Press RDS DISPLAY while listening to an FM station
to show the RDS signals.
• Each time you press the button, the display changes to
show the following information:
PTY +
RDS
DISPLAY
SETTING
PRO LOGIC
TEST
PTY –
6
PTY SEARCH
7
SLOW
8
9
SETUP
0
ZOOM
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
PS NAME
RT
CT
CLEAR
SEARCH
REMAIN
SLEEP
Normal indication
(Frequency)
To check the PTY, press PTY SEARCH once so that the current
PTY code appears.
• “NO PTY” appears if no signal is sent.
If the remote control is not for the tuner operations, the
button for the RDS operations—PTY + and –, and PTY
SEARCH—do not work. In this case, press FM/AM on the
remote control so that the remote control can be used for the
tuner operation.
About characters shown on the display
When the display shows PS NAME, RT, or CT signals, the
following characters are used.
• The display cannot differentiate upper case and lower case letters
and always uses upper case letters.
• The display cannot show accented letters, “A,” for instance, may
stand for accented “A’s” like “Å, Ä, Ã, Á, À, Â, å, ä, ã, á, à, and
â.”
Using the RDS (Radio Data System)
to Receive FM Stations
RDS allows FM stations to send an additional signal along with their
regular program signals. For example, the stations send their station
names, as well as information about what type of program they
broadcast, such as sports or music, etc.
Note:
If searching finishes at once, “PS NAME,” “RT,” and “CT” will not
appear on the display.
When tuned to an FM station which provides the RDS service, the
RDS indicator lights up on the display.
RDS indicator
Then, the display shows its PS name.
Notes:
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the tuned station is not
transmitting RDS signals properly or if the signal strength is weak.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Program by PTY Codes
PTY codes
DOCUMENT
One of the advantages of the RDS service is that you can locate a
particular kind of program from the preset channels (see page 45) by
specifying the PTY codes.
NEWS
FOLK M (Music)
AFFAIRS
OLDIES
NATIONAL
COUNTRY
JAZZ
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset stations.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
INFO (Information)
SPORT
EDUCATE (Education)
DRAMA
From the remote control ONLY:
LEISURE
TRAVEL
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
CULTURE
SCIENCE
PTY SEARCH
PHONE IN
RELIGION
1 Press PTY SEARCH while listening to
VARIED
5
an FM station.
The currently selected PTY code appears on the
display.
POP M (Music)
SOCIAL A
CHILDREN
FINANCE
ROCK M (Music)
EASY M (Music)
PTY –
PTY SEARCH
PTY +
2 Press PTY + or PTY – until the
4
5
6
PTY code you want appears on
the display.
• For details, see “Description of the
PTY codes” on page 48.
LIGHT M (Music)
CLASSICS
WEATHER
OTHER M (Music)
PTY SEARCH
3 Press PTY SEARCH again, while the
PTY code selected in the previous step
is still on the display.
5
The system searches FM preset stations, stops when it finds the
one you have selected, and tunes in that station.
To stop during searching
Press PTY SEARCH again.
PTY SEARCH
5
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
I Description of the PTY codes:
NEWS:
News.
WEATHER: Weather reports and forecasts.
AFFAIRS:
Topical program expanding or enlarging upon the
news—debate, or analysis.
FINANCE: Stock Market reports, commerce, trading etc.
CHILDREN: Programs targeted at a young audience.
INFO:
Programs the purpose of which is to impart advice in
the widest sense.
SOCIAL A: Programs about sociology, history, geography,
psychology and society.
SPORT:
Programs concerned with any aspect of sports.
RELIGION: Religious programs.
EDUCATE: Educational programs.
DRAMA: All radio plays and serials.
PHONE IN: Involving members of the public expressing their
views either by phone or at a public forum.
CULTURE: Programs concerning any aspect of national or
TRAVEL:
LEISURE:
JAZZ:
Travel information.
regional culture, including language, theater, etc.
Programs about recreational activities.
Jazz music.
SCIENCE:
VARIED:
Programs about natural sciences and technology.
Used for mainly speech-based programs such as
quizzes, panel games and personality interviews.
COUNTRY: Songs which originate from, or continue the musical
tradition of the American Southern States.
POP M:
Commercial music of current popular appeal.
Rock music.
NATIONAL: Current popular music of the nation or region in that
country’s language.
ROCK M:
EASY M:
Current contemporary music considered to be “easy-
listening.”
OLDIES:
Music from the so-called “golden age” of popular
music.
LIGHT M:
Instrumental music, and vocal or choral works.
FOLK M:
Music which has its roots in the musical culture of a
particular nation.
CLASSICS: Performances of major orchestral works,
symphonies, chamber music, etc.
DOCUMENT:Programs concerning factual matters, presented in an
investigative style.
OTHER M: Music not fitting into any of the other categories.
Classification of the PTY codes for some FM stations
may be different from the above list.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
FM 1
FM 2
FM 3
FM 4
FM 5
FM 6
FM 7
FM 8
FM 9
FM 10
FM 11
FM 12
FM 13
FM 14
FM 15
AM 1
AM 2
AM 3
AM 4
AM 5
AM 6
AM 7
AM 8
AM 9
AM 10
AM 11
AM 12
AM 13
AM 14
AM 15
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the DVD Preferences
Setting the Initial Languages
STANDBY/ON
AUDIO
You can select your favorite language you listen to or read on the TV
screen.
RDS
When you operate this system or watch a DVD, you will be able to
operate the system or to enjoy a DVD in the language you have
selected and stored.
TV
VCR
TV/VIDEO DISPLAY
TV CHANNEL
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
TV VOLUME
VCR
AUX
On the language selection menu, you can select the following:
DVD
FM/AM
CONTROL
TUNER PRESET
LANGUAGES
SYSTEM
DOWN
UP
FF
REW
OSD LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
VCR CHANNEL
TUNING
SUBTITLE
B.SEARCH
F.SEARCH
MENU LANGUAGE
∞ 5
ENTER
ENTER
» « | \ : Move
Setup : Exit
VOLUME
TOP MENU MENU
RETURN MUTING
OSD LANGUAGE : Select the indication language shown on
the TV screen while operating the
RETURN
SETUP
SOUND
system. (ex. PLAY, STOP, PAUSE, etc.)
1
PTY –
4
2
PTY SEARCH
5
3
PTY +
SETTING
PRO LOGIC
TEST
AUDIO
: Select the language you listen to while
watching a DVD.
6
7
8
9
SETUP
SLOW
SUBTITLE
: Select the subtitle language you read
while watching a DVD.
0
ANGLE
ZOOM
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
MENU LANGUAGE : Select the menu language recorded on a
DVD which you use while operating the
DVD’s own menu.
CLEAR
SEARCH
REMAIN
SLEEP
Languages you can select on this menu
You can select the following languages separately for each listed
item on the menu.
On the Setup menu, you can do the two main important settings—
language selection (LANGUAGES) menu and system setting
(SYSTEM) menu.
• Setup menu can only be displayed while a disc is not playing.
(The DVD player must be selected as the source.)
• You can only use the remote control for Setup menu operations.
• For “OSD LANGUAGE”:
English, Chinese, Spanish, French, German, Japanese, and
Korean.
• For “AUDIO,” “SUBTITLE,” and “MENU LANGUAGE”:
English, Chinese, French, German, Japanese, Russian, Spanish,
Portuguese, Korean and Original*.
* Available only for “AUDIO” and “SUBTITLE.”
When you want to operate the disc or enjoy its playback in the
originally recorded (default) language, select “ORIGINAL.”
Note:
The original language will be selected as the initial language
regardless of your setting in the following cases:
• If the language you have selected is not recorded on the disc.
• If the disc is programed to be played back in the original language.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
I Basic language selecting procedure
Ex. : To select the desired language as the initial language for
Introducing the DVD Preference (System)
“AUDIO.”
You can set the DVD preference to match it to your usage and
operating circumstances.
From the remote control ONLY:
SETUP
1 Press SETUP.
On the system setting menu, you can set the following:
Language selection menu of the Setup menu appears on
the TV screen.
LANGUAGES
SYSTEM
TV SCREEN
4 : 3 LB
OFF
LANGUAGES
SYSTEM
RATING LEVEL
OSD LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
SUBTITLE
MENU LANGUAGE
» « | \ : Move
Setup : Exit
» « | \ : Move
Setup : Exit
TV SCREEN: Select the TV screen size for playing back a DVD
recorded with 16:9 wide screen video signal.
2 Press ∞ (or 5) to select
(highlight) one of the language
items.
• 4:3 LB
: Select “4:3 LB (Letter Box)”
when the aspect ratio of your TV
is 4:3. While viewing a wide
ENTER
screen picture, the black bars
LANGUAGES
SYSTEM
appear on the top and the bottom of the screen.
: Select “4:3 PS (Pan-Scan)” when
the aspect ratio of your TV is 4:3.
While viewing a wide screen
OSD LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
• 4:3 PS
SUBTITLE
MENU LANGUAGE
picture, the black bars do not
appear, however, the left and right edge sides of
the pictures will not be shown on the screen.
: Select “16:9” when the
» « | \ : Move
Setup : Exit
• 16:9
aspect ratio of the TV is
16:9. (Set the screen size to
full on your TV.)
3 Press ENTER.
Pop-up window appears (where the
language names are listed).
ENTER
indicates the current setting.
RATING LEVEL: You can select this to restrict playback of DVDs
containing violent scenes and those not suitable for your family
members. (See page 53 for detailed operations.)
LANGUAGES
SYSTEM
OSD LANGUAGE
AUDIO
ENGLISH
E
ENGLISH
SUBTITLE
CHINESE
FRENCH
MENU LANGUAGE
GERMAN
JAPANESE
RUSSIAN
» « | \ : Move
Setup : Exit
indicates that more languages are listed, but not shown.
4 Press ∞ (or 5) to select
(highlight) the language you
want, then press ENTER.
ENTER
The setting is stored (and the pop-up
window goes off).
• When you want to cancel the setting
you have just made, press RETURN
without pressing ENTER. (Pop-up
menu also goes off.)
5 Repeat steps 2 to 4 to select the other language
items listed.
SETUP
To erase the Setup menu
Press SETUP.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the DVD Preferences
3 Press ∞ (or 5) to select
(highlight) one of the system
setting items listed on the
menu.
STANDBY/ON
AUDIO
ENTER
RDS
TV
VCR
TV/VIDEO
DISPLAY
LANGUAGES
SYSTEM
TV CHANNEL
DISPLAY STEP
AUDIO/
TV SCREEN
4 : 3 LB
OFF
SUBTITLE
FM MODE
TV VOLUME
RATING LEVEL
VCR
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
REW
» « | \ : Move
Setup : Exit
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
3/2/5/∞
ENTER
4 Press ENTER.
Pop-up window appears (where the
selectable settings are listed).
ENTER
ENTER
indicates the current setting.
VOLUME
LANGUAGES
SYSTEM
TOP MENU MENU
RETURN MUTING
RETURN
SETUP
TV SCREEN
4:3LB
4: 3 PS
16 : 9
Number
buttons
SOUND
RATING LEVEL
1
2
3
SETTING
PRO LOGIC
TEST
PTY –
PTY SEARCH
PTY +
4
5
6
7
8
9
SETUP
SLOW
0
» « | \ : Move
Setup : Exit
ANGLE
ZOOM
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
5 Press ∞ (or 5) to select
CLEAR
SEARCH
REMAIN
SLEEP
(highlight) the proper setting,
then press ENTER.
The setting is stored (and the pop-up
window goes off).
ENTER
• When you want to cancel the setting
you have just made, press RETURN
without pressing ENTER. (Pop-up
menu also goes off.)
I Setting the TV screen size
From the remote control ONLY:
SETUP
1 Press SETUP.
Language selection menu of the setup menu appears on
the TV screen.
• Even if “4:3 PS” is selected, the screen size may become
“4:3 LB” while playing some DVDs. This depends on how
the DVD is programed and recorded.
LANGUAGES
SYSTEM
• If a disc (or some portions of the disc) is recorded with
the video signals of 4:3 aspect ratio, this setting does not
take effect. The pictures are displayed with full 4:3 aspect
ratio or with 4:3 Letter Box.
OSD LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
SUBTITLE
MENU LANGUAGE
» « | \ : Move
Setup : Exit
To erase the Setup menu
Press SETUP.
SETUP
2 Press ENTER (or 3/2) to
select (highlight) the system
setting menu.
ENTER
LANGUAGES
SYSTEM
TV SCREEN
4 : 3 LB
OFF
RATING LEVEL
» « | \ : Move
Setup : Exit
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Parental (Rating) Level
6 Press ∞ (or 5) to select
(highlight) the level you want,
then press ENTER.
Using this function, you can restrict playback of DVD containing
violent scenes and those not suitable for your family members.
Nobody can play such a disc unless this function is canceled.
(“WRONG PARENTAL CODE” appears on the display if you try to
play back such a disc.)
ENTER
• This setting takes effect only for the DVDs containing the rating
level information—Level 1 (most restrictive) to Level 8 (least
restrictive).
To erase the Setup menu
Press SETUP again.
SETUP
From the remote control ONLY:
1 Press SETUP.
SETUP
To change the password
Language selection menu of the setup menu appears on
the TV screen.
1 Repeat steps 1 to 5 of “Setting the Parental
(Rating) Level” procedure.
2 Press ENTER (or 3/2) to
select (highlight) the system
setting menu.
2 Press ∞ (or 5) to select
(highlight) “NEW
ENTER
LANGUAGES
SYSTEM
PASSWORD,” then ENTER.
ENTER
TV SCREEN
4 : 3 LB
OFF
RATING LEVEL
» « | \ : Move
Setup : Exit
LANGUAGES
SYSTEM
LANGUAGES
SYSTEM
TV SCREEN
4 : 3 LB
----
TV SCREEN
4 : 3 LB
3 Press ∞ (or 5) to select
NEW PASSWORD
RATING LEVEL
OLEVEL 4
BLEVEL5
LEVEL 6
(highlight) “RATING LEVEL.”
LEVEL 7
LEVEL 8
LANGUAGES
SYSTEM
NEW PASSWORD
Setup : Exit
ENTER
»
«
|
\
: Move
»
«
|
\
: Move
Setup : Exit
TV SCREEN
4 : 3 LB
OFF
RATING LEVEL
• If “NEW PASSWORD” is the last item listed on the pop-up
window and is not shown, pressing ∞ repeatedly will show it
in the pop-up window.
» « | \ : Move
Setup : Exit
3 Press the number buttons to
enter a new password, then
ENTER.
4 Press ENTER.
“RATING LEVEL” now changes to
“ENTER PASSWORD” on the menu.
Your new password is now stored.
ENTER
LANGUAGES
SYSTEM
ENTER
TV SCREEN
4 : 3 LB
ENTER PASSWORD
To erase the Setup menu
SETUP
Press SETUP again.
» « | \ : Move
Setup : Exit
5 Press the number buttons to enter the password
(4 digits).
• When shipped from the factory, password is “7890.”
• If you enter a wrong password, your setting will be canceled.
LANGUAGES
SYSTEM
LANGUAGES
SYSTEM
TV SCREEN
4 : 3 LB
TV SCREEN
4 : 3 LB
RATING LEVEL
OOFF
ENTER PASSWORD
DIGITAL OUTPUT
***
BLEVEL1
LEVEL 2
LEVEL 3
LEVEL 4
LEVEL 5
Setup : Exit
» « | \ : Move
» « | \ : Move
Setup : Exit
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating JVC’s Components
You can use the remote control to operate not only this unit but also other JVC products.
• Refer also to the manuals supplied for the other products.
– This remote control can operate a VCR whose remote control code is set to A code.
• To operate the other products, aim the remote control directly at the remote sensor on the target product.
❏ To operate a JVC’s TV
You can perform the following operations on the TV.
STANDBY/ON
AUDIO
TV
TV VOLUME +/– : Adjust the volume.
TV/VIDEO : Set the input mode (either TV or
VIDEO).
: Turn on or off the TV.
RDS
TV
TV/VIDEO
TV
VCR
TV/VIDEO
DISPLAY
TV CHANNEL
DISPLAY STEP
AUDIO/
TV VOLUME
TV CHANNEL
+/–
SUBTITLE
FM MODE
TV VOLUME
+/–
TV CHANNEL +/– : Change the channels.
VCR
DVD
FM/AM
AUX
CONTROL
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
B.SEARCH
F.SEARCH
ENTER
❏ To operate a JVC’s VCR
VCR
CONTROL
After pressing VCR CONTROL on the remote
control, you can perform the following
operations on the VCR.
STANDBY/ON
AUDIO
RDS
DISPLAY
VCR
TV
VCR
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
VCR
: Turn on or off the VCR.
STEP
SUBTITLE
FM MODE
TV VOLUME
VCR CHANNEL +/–: Change the channels.
VCR
DVD
FM/AM
AUX
CONTROL
1 – 9, 0
3/8
: Select TV channel on the VCR.
: Start playback.
VCR CONTROL
TUNER PRESET
4
¢
DOWN
UP
FF
7
: Stop playback.
REW
VCR CHANNEL
TUNING
VCR CHANNEL
+
VCR CHANNEL
–
STEP
: Pause playback. To release it,
press 3/8.
B.SEARCH
F.SEARCH
3/8
7
FF (¢)
: Fast-wind a tape.
: Rewind a tape.
ENTER
REW (4)
VOLUME
After operating the VCR, press
DVD
TOP MENU MENU
RETURN MUTING
FM/AM
DVD or FM/AM.
SOUND
Number
buttons
1
PTY –
2
3
PTY +
SETTING
PRO LOGIC
TEST
PTY SEARCH
IMPORTANT:
4
5
6
7
SLOW
8
9
SETUP
When you press VCR CONTROL, some buttons on the
0
ZOOM
remote control cannot work for operating the system.
ANGLE
D.R.C
DSP MODE
To operate the system, press DVD or FM/AM.
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Other Manufacturers’ TV
❏ To change the transmittable signals for operating a
You can use the remote control to operate other
manufactures’ TV.
• Refer also to the manuals supplied for the other products.
• To operate the other products, aim the remote control
directly at the remote sensor on the target product.
TV
1. Press and hold TV
.
2. Enter manufacturer’s code using buttons 1–9, and 0.
3. Release TV
Now, you can perform the following operations on the TV.
.
TV
TV VOLUME +/– : Adjust the volume.
TV/VIDEO : Set the input mode (either TV or
VIDEO)
TV CHANNEL +/– : Change the channels.
: Turn on or off the TV.
STANDBY/ON
AUDIO
RDS
TV
TV
VCR
TV/VIDEO
DISPLAY
TV/VIDEO
TV CHANNEL
DISPLAY STEP
AUDIO/
TV VOLUME
TV CHANNEL
+/–
SUBTITLE
FM MODE
TV VOLUME
+/–
VCR
4. Try to operate your TV by pressing TV
.
DVD
FM/AM
AUX
CONTROL
When your TV turns on or off, you have entered the correct
code.
TUNER PRESET
DOWN
UP
FF
REW
VCR CHANNEL
TUNING
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
B.SEARCH
F.SEARCH
Manufacturers’ codes for TV
ENTER
Manufacturer
Codes
JVC
Akai
Fisher
01
12
12
VOLUME
TOP MENU MENU
RETURN MUTING
Number
buttons
Grundig
Hitachi
Mitsubishi
Nokia
09, 17, 21
11, 13, 14, 24
02, 16
SOUND
1
PTY –
4
2
3
PTY +
PTY SEARCH
SETTING
PRO LOGIC
TEST
5
6
7
SLOW
8
9
SETUP
23
Nordmende
Panasonic
Philips
Saba
Samsung
Sanyo
13, 14, 24
08, 23 – 27
02, 20, 22
13, 14, 22 – 24
03 – 06, 32
12, 16
0
ZOOM
ANGLE
D.R.C
DSP MODE
REPEAT A-B REPEAT PROGRAM
CLEAR
SEARCH
REMAIN
SLEEP
Schneider
Sharp
12
10, 31
Sony
15, 16
Telefunken
Thomson
Toshiba
14, 24, 28
13, 14, 24, 33, 34
07, 16 – 19, 21
Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs and
mechanism clean.
General Notes
Cleaning the unit
In general, you will have the best performance by keeping your
discs, and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on shelves.
• Keep the disc tray closed when not in use.
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily stained,
wipe it with a cloth soaked in water-diluted neutral detergent and
wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
Handling Discs
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substance such as insecticides to
it.
— DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
• Remove the disc from its case by
holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of
the disc, or bend the disc.
• Put the disc back in its case after
use to prevent warping.
• Be careful not to scratch the
surface of the disc when placing it
back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and
moisture.
To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.
DO NOT use any solvent—such as conventional record
cleaner, spray, thinner, or benzine—to clean the disc.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.
PROBLEM
Power does not come on.
The remote control does not work.
POSSIBLE CAUSE
SOLUTION
Insert the plug into the socket.
• Come close to the center unit.
The power cord is not plugged in.
• It is too far from the center unit, or is not
facing the center unit.
• There is something obstructing the remote
sensor.
• Avoid any obstacles.
• The VCR CONTROL button has been
pressed.
• Press DVD or FM/AM to operate the
system. (See page 54.)
• The battery is flat.
• Replace the battery.
• The battery has been inserted the wrong
way round (+/–).
• Insert the battery correctly.
• Sunlight is falling directly on the detector. • Shade the remote control from direct
sunlight.
No sound.
• There is a short in the speaker cord.
• The audio cord is not connected properly.
• An incorrect source has been selected.
• Reconnect the speaker cord.
• Connect the cord properly. (See page 8.)
• Select the correct source.
(See pages 10 to 15.)
• Muting is on.
• The disc is copy–protected CD.
• Press MUTING to cancel muting.
• Replace the disc.
Sound is emitted from only one speaker.
No video.
• The speaker cord is not connected correctly. • Connect the cord properly. (See page 7.)
• Left-right balance is incorrect.
• Adjust balance. (See pages 20 to 24.)
• The video cord is not connected properly.
• TV input selection is incorrect.
• Connect the cord properly. (See page 9.)
• Select the correct input.
A disc cannot be played.
• The system and disc region code numbers
• Replace the disc. (See page 25.)
are incompatible.
• The disc causes the parental (rating) error. • Enter password to change the parental
(rating) level. (See page 53.)
“WRONG DISC FORMAT” appears on the
• The CD–R/CD–RW does not contain any
• Replace the disc.
TV screen.
MP3 files.
Video and audio are distorted.
• The disc is dirty.
• Clean the disc.
• A VCR is connected between the center unit • Connect the center unit and TV directly.
and the TV.
The edge is missing on the video image.
Continuous static during FM broadcasts.
• Initial setup (TV screen size) was incorrect. • Set TV screen size correctly.
(See pages 51 and 52.)
• The received signal is too weak.
• Connect an external FM antenna
(see page 5), or contact your dealer.
• Select another station.
• The station is too far away.
• The antenna is not connected correctly.
• Check the connection. (See page 5.)
The system does not work correctly.
• Lightning or electronic noise interferes with • Switch power off, and remove and re-insert
operation of the microcomputer.
the power plug in the socket.
• Immediately after beginning to heat the
room, the unit was moved to a cold location
causing condensation to form inside.
• Switch power off and leave the unit a few
hours before switching power on again.
The VCR cannot be operated using this
remote control.
• The remote control is not set for VCR
operations.
• Press VCR CONTROL to operate the VCR.
(See page 54.)
• The VCR is not a JVC’s product.
• This remote control can operate a JVC’s
VCR whose remote control code is set to A
code.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Center unit (XV-THA30R)
Subwoofer (SP-WA30)
Amplifier section
Speaker:
20 cm
Bass-reflex, Magnetically Shielded
Front/Center/Rear:
25 watts per channel, min. RMS at 6 ohms as 1 kHz,
with no more than 10 % total harmonic distortion.
Power Handling Capacity: 110 W
Impedance:
4 Ω (min)
25 Hz to 200 Hz
Subwoofer:
Frequency Range:
110 watts, min. RMS at 4 ohms as 100 Hz,
with no more than 10 % total harmonic distortion.
Dimensions (W × H × D): 249 mm × 404 mm × 335 mm
Mass: 6.5 kg (except cords)
Audio section
Satellite Speakers (SP-XA30)
Audio input sensitivity/Impedance (at 1 kHz)
Speakers:
8 cm
Analog input:
Bass-reflex, Magnetically Shielded
AUX (“AUX IN”): 500 mV/47 kΩ
Power Handling Capacity: 35 W
Video section
Impedance:
6 Ω (min)
Color System:
PAL
Frequency Range:
Length of cords:
90 Hz to 20 kHz
6 m
Horizontal Resolution: 480 lines
Signal-to-Noise Ratio: 68 dB
Output Level
Dimensions (W × H × D): 105 mm × 119 mm × 126 mm
Mass: 600 g (except cords)
VIDEO(Composite): 1.0 V(p-p)/75 Ω
S-VIDEO(Y): 1.0 V(p-p)/75 Ω
(C): 0.286 V(p-p)/75 Ω
Rear Satellite Speakers (SP-XSA30)
Tuner section
Speakers:
8 cm
Bass-reflex, Magnetically Shielded
Tuning Range
FM : 87.5 MHz – 108.0 MHz
AM : 522 kHz – 1 629 kHz
Power Handling Capacity: 35 W
Impedance:
6 Ω (min)
Usable Sensitivity
FM: 8.0 dBf (0.9 µV/75 Ω)
AM loop antenna: 650 µV/m
Frequency Range:
Length of cords:
90 Hz to 20 kHz
10 m
Dimensions (W × H × D): 105 mm × 119 mm × 126 mm
Mass: 600 g (except cords)
General
Readable Discs:
DVD VIDEO, Video CD,
Super Video CD, Audio CD,
CD–R/RW (Audio CD, Video CD,
Super Video CD, MP3 disc),
DVD–R (Video format)
Designs & specifications are subject to change without notice.
Power Requirements:
Power Consumption:
AC 230 V , 50 Hz
120 W (at operation)
2 W (in standby mode)
Dimensions (W × H × D): 350 mm × 80 mm × 365 mm
Mass:
6.5 kg
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
C
0602KSMMDWSAM
V
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|