DVD DIGITAL CINEMA SYSTEM
Consists of XV-THS8, SP-PWS8, SP-THS9F,
SP-THS9C and SP-THS9S
Consists of XV-THS5, SP-PWS5, SP-THS5F,
SP-THS5C and SP-THS7S
INSTRUCTIONS
LVT1148-010A
[US, UB, UG, A]
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings, Cautions and Others
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are
shown below:
Wall or obstructions
Wall or
obstructions
8 cm
XV-THS8/
3 cm XV-THS5
Front
XV-THS8/XV-THS5
3 cm
10 cm
No
obstructions
15 cm
Wall or obstructions
Wall or
obstructions
20 cm
SP-PWS8/
SP-PWS5
Front
SP-PWS8/SP-PWS5
No
15 cm
15 cm
15 cm
obstructions
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Playback ...............................................................33
Speaker layout ....................................................................12
Hong Kong and Australia) ...................................................13
Menu description ................................................................36
Turning off the sound temporarily [MUTING] .....................17
Adjusting the brightness of the indications [DIMMER] .......17
Sleep Timer [SLEEP] ...........................................................18
Adjusting the output level of the subwoofer and center/
surround speakers [SUBWFR, CENTER, SURR L/R] ...........18
Adjusting the treble sound [TREBLE] ..................................18
Changing the scan mode ....................................................18
Optimizing the speaker settings [Smart Surround Setup] ...19
Setting the AM tuner interval spacing .................................39
AV COMPU LINK remote control
system ...........................................41
References ....................................42
Maintenance .......................................................................42
Troubleshooting ..................................................................42
Specifications .....................................................................43
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
7 Safety precautions
Notes on handling
7 Important cautions
Avoid moisture, water and dust
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not place it near
a heating device.
Installation of the system
• Select a place which is level, dry and neither too hot nor too cold;
between 5°C and 35°C.
When you are away
When away on travel or for other reasons for an extended period of
time, disconnect the power cord plug from the wall outlet.
• Leave sufficient distance between the system and the TV.
• Do not use the system in a place subject to vibration.
Power cord
Do not block the vents
Blocking the vents may damage the system.
• Do not handle the power cord with wet hands!
• A small amount of power is always consumed while the power
cord is connected to the wall outlet (center unit only).
• When unplugging the power cord from the wall outlet, always
pull on the plug, not the power cord.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents including disinfectants.
These may cause deformation or discoloring.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart, flower or
credit card, etc.) available on the market, because it may damage
the system.
If water gets inside the system
Turn the system off and disconnect the power cord plug from the
wall outlet, then call the store where you made your purchase.
Using the system in this condition may cause fire or electrical
shock.
• Do not use a disc with tape, stickers, or paste on it, because it
may damage the system.
Label sticker
Supplied accessories
Check to be sure you have all of the supplied accessories.
The number in parentheses is the quantity of the pieces supplied.
If anything is missing, contact your dealer immediately.
Sticker
Paste
• Remote control (1)
• Batteries (2)
• FM antenna (1)
Note about copyright laws
• AM loop antenna (1)
• Power cord (1)
Check the copyright laws in your country before recording from the
discs. Recording of copyrighted material may infringe copyright
laws.
• System cord (1)
• Composite video cord (1)
Note about copyguard system
• Speaker cords
For satellite (front left/right) and center speakers (3)
For satellite speakers (surround left/right) (2)
The discs are protected by copyguard system. When you connect
the system to your VCR directly, the copyguard system activates
and the picture may not be played back correctly.
• Screws (TH-S8 only)
M5 x 25 mm:
For satellite speakers (8)
• AC plug adaptor (2) (except for Hong Kong and Australia)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
• The following discs cannot be played back:
DVD-ROM, DVD-RAM, SACD, CD-ROM, CD-I (CD-I Ready),
Photo CD, etc.
Playable disc types
Playing back these discs will generate noise and damage the
speakers.
• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs,
their actual operation may be different from what is
explained in this manual. This is due to the disc
programming and disc structure, not a malfunction of this
system.
This system has been designed to play back the following discs:
DVD VIDEO, DVD AUDIO, Video CD (VCD), Super Video CD
(SVCD), Audio CD (CD), CD-R and CD-RW.
• This system accommodates the NTSC and PAL system. When
you play an NTSC disc with the scan mode set to “PAL”
(A pg. 18), the NTSC video signal is converted to the PAL60
signal and output.
• This system can also play MP3, WMA, JPEG and MPEG4 files
recorded on CD-Rs and CD-RWs. (A pg. 20)
• This system can also play finalized DVD-R/-RWs recorded in
DVD VIDEO format. However, some discs may not be played
because of their disc characteristics or recording conditions.
Notes on CD-R and CD-RW
• User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can
be played back only if they are already “finalized”.
• This system can play CD-Rs or CD-RWs recorded on a personal
computer if they have been recorded in the audio CD format.
This system can also play CD-Rs or CD-RWs if MP3, WMA,
JPEG or MPEG4 files are recorded on them.
However, some discs may not be played back because of their
disc characteristics, recording conditions, or damage or stain on
them.
Discs you can play:
DVD VIDEO
CD
Especially, the configuration and characteristics of an MP3,
WMA, JPEG or MPEG4 disc are determined by the writing
(encoding) software and hardware used for recording. Therefore,
due to the software and hardware used, the following symptoms
may occur:
DVD AUDIO
CD-R
•
Some discs may not be played back.
Some tracks on an MP3 or WMA disc may be skipped or may
not be played back normally.
•
VCD
CD-RW
•
Some files on a JPEG or MPEG4 disc may be played back
distortedly.
• Before playing back CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• CD-RWs may require a longer readout time. This is caused by
the fact that the reflectance of CD-RWs is lower than that of
regular CDs.
SVCD
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
Region code of DVD VIDEO
DVD VIDEO players and DVD VIDEO discs have their own
Region Code numbers. This system can play back DVD VIDEO
discs whose Region Code numbers include the system’s Region
Code, which is indicated on the rear panel.
Example of playable DVD:
For Australia
For Middle East
Except for Australia and Middle East
If a DVD with an improper Region Code number is loaded,
“REGION CODE ERROR!” appears on the TV screen and
playback cannot start.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Notes on MP3/WMA/JPEG/MPEG4 discs
• MP3/WMA/JPEG/MPEG4 discs (either CD-R or CD-RW)
require a longer readout time. (It differs due to the complexity of
the directory/file configuration.)
Notes on JPEG discs only
• We recommend to record a file at 640 x 480 resolution. (If a file
has been recorded at a resolution of more than 640 x 480, it will
take a longer time to be displayed.)
• When making an MP3/WMA/JPEG/MPEG4 disc, select ISO
9660 Level 1 or Level 2 for the disc format.
• This system can only play baseline JPEG files.
• Some files on a JPEG disc may be played back distortedly.
• This system supports “multi-session” discs (up to 20 sessions).
• This system cannot play “packet write” discs.
• The system can only play MP3/WMA/JPEG/MPEG4 files with
the following file extensions;
Notes on MPEG4 disc only
• The system supports the types of simple profile as MPEG4 files
(MPEG4 SP).
• The system supports MPEG4 files recorded with the maximum
bit rate of 384 kbps and an audio codec of G.726. (To play the
MPEG4 file, it is required that G.726 formatted audio data is
contained in that file.)
• The maximum size of the played picture is at a 352 x 288 pixel
resolution (CIF).
MP3:
“.MP3”, “.Mp3”, “.mP3” and “.mp3”
combination (such as “.Wma”)
JPEG: “.jpg”, “.jpeg”, “.JPG”, “.JPEG” and any uppercase and
lowercase combination (such as “.Jpg”)
combination (such as “.Asf”)
• Some files may be skipped or may not be played normally.
• If different type of files (audio (MP3/WMA), still picture
(JPEG), and video (MPEG4) files) are recorded on a disc, set the
FILE TYPE setting in the PICTURE menu to the appropriate
setting for the data to be read. (A pg. 37)
• The system recognizes up to 150 tracks (files) per group, 99
groups per disc, and the total number of the tracks (files) that the
system can play is 1000. For example, if you set FILE TYPE to
AUDIO (A pg. 37) and play a disc that contains 500 MP3 tracks,
200 JPEG files, and 600 WMA tracks, the system can play 500
MP3 tracks and the first 500 of 600 WMA tracks.
normally because of their disc characteristics or recording
conditions.
Notes on MP3/WMA discs only
• The system supports MP3 files recorded with a bit rate of 32 –
320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,
24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.
• If the tag information (album name, artist, and track title, etc.) is
recorded on a disc, it appears in the file control display on the TV
screen. (A pg. 28)
• We recommend to record each piece of material (song) at a
sample rate of 44.1 kHz and at a data transfer rate of
128 (96*) kbps.
• Some tracks may be skipped or may not be played back
normally.
* For WMA only
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES
WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE BY A CONSUMER ENGAGING IN
PERSONAL AND NON-COMMERCIAL ACTIVITIES.
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.”
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The illustrations of the center unit and the subwoofer used in this manual are of TH-S8 unless otherwise noted.
Front panel (center unit)
Display window
pg. 25
pg. 31
pg. 21
pg. 21
pg. 21
pg. 21
pg. 21
pg. 39
pg. 40
pg. 33
pg. 18
pg. 23 pg. 39
pg. 16
pg. 20
pg. 20
pg. 20
Disc tray (inside): pg. 20
pg. 17
STANDBY
VOLUME
PHONES
Remote sensor: pg. 7 pg. 16
pg. 17
pg. 17
Rear panel (center unit)
pg. 41
pg. 12
pg. 13
pg. 13
OPTICAL
VIDEO
OUT
VCR IN
ANTENNA
AM LOOP
LEFT
COMPONENT VIDEO OUT
Y
PB
PR
RIGHT
DIGITAL
IN
(DBS)
FM 75
AM EXT
AC IN
COAXIAL
AUDIO IN
(VCR)
AV COMPU
LINK-
S-VIDEO
pg. 12
pg. 13 pg. 12
pg. 8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of parts and controls
Powered subwoofer
SP-PWS8/SP-PWS5
Do not block the
ventilation openings.
pg. 12
pg. 10
pg. 13
(except for Hong Kong
and Australia)
POWER ON lamp:
pg. 16
Power cord:
pg. 13
Rear
Front
NOTE
• For safety reasons, always ensure that there is sufficient space behind
the powered subwoofer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
OPEN/CLOSE
F AUDIO
VCR/DBS
DBS
pg. 16
pg. 14
pg. 15
pg. 20
pg. 14
TV/VIDEO MUTING
TV
pg. 17
DVD
FM/AM
VCR
pg. 17
R6P (SUM-3)/AA (15F)
type dry-cell batteries
(supplied)
AUDIO SUBTITLE SURR. FL DISP.
pg. 21
pg. 25
pg. 17
pg. 30
pg. 29
CHANNEL AUDIO VOL
AUDIO
TV
pg. 14
pg. 14
pg. 14 – 39
pg. 20
VCR/DBS
TUNING
TUNING
pg. 22, 39
MEMORY
FM MODE
pg. 22
pg. 27
MENU
pg. 27
pg. 20,
40
pg. 20, 40
If the range or effectiveness of the remote control decreases,
replace both batteries.
ENTER
pg. 18, 36
ON
SCREEN
REC
pg. 25
pg. 15,
22
ANGLE
ZOOM
pg. 23
pg. 29
control
Number
buttons:
pg. 22
Aim the remote control directly to the front panel of the center unit.
pg. 31
pg. 31
pg. 33
pg. 34
pg. 36
pg. 35
100+
• Do not hide the remote sensor.
REPEAT A-B RPT PLAY MODE CANCEL
pg. 32
pg. 32, 33
SETUP SETTING SCAN MODE RETURN
VFP
pg. 27
pg. 18, 31
TREBLE
pg. 17
pg. 18
SMART
SLEEP DIMMER S.SETUP
pg. 18
pg. 19
pg. 18
S.WFR CENTER
L-SURR.-R
pg. 18
pg. 18
NOTE
• To use the buttons
under the cover, slide
down the cover.
TITLE/GROUP
ANGLE
ZOOM
PAGE
TV RETU
100+
REPEAT -
SLETUP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
If reception is poor
Connecting the FM and
AM antennas
Center unit
AM loop antenna
7 AM loop antenna
Setting up supplied AM loop antenna
Outdoor single vinyl-covered wire antenna
(not supplied)
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
7 FM antenna
FM antenna (supplied)
Center unit
Extend the supplied FM antenna
horizontally.
Connecting AM loop antenna
1
Center unit
If reception is poor
Center unit
Outdoor FM antenna
(not supplied)
2
Standard type (75 C
Outdoor FM antenna cord
coaxial) connector
(not supplied)
Antenna cord
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
3
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords and power cords. This could cause poor reception.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This page is for
2
Assembling the front and
surround speakers
The following procedure explains the front speaker assembly. The
assembly of both the front and surround speakers are done in the
same manner.
Black
Red
Copper
Silver
Front speaker
Surround speaker
Stand (×4)
(×2)
(×2)
Screw M5 x 25 mm (supplied)
3
Base plate (×4)
Speaker
Black
White
NOTE
• The stands and the base plates are commonly used for both front and
surround speakers assembly.
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop the base plate while assembling; otherwise,
it may cause damage to the floor or injury.
Stand
Screw M5 x 25 mm
(supplied)
1
Completion
Stand
Speaker cord
Base plate
(supplied)
Bottom
with stand
without stand
• You can route the speaker cords through one on the three
grooves on the base plate depending on the speaker layout.
• Depending on the installing condition, you can assemble the
front and surround speakers without the stands. In such a
case, attach the speaker directly to the base plate instead of
the stand.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This page is for
Connecting the satellite (front, center, surround)
speakers
Before connecting the
speaker cords;
Twist and pull the insulation coat
off and remove.
Speaker cord (supplied)
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals referring to the table below:
Powered subwoofer
SP-PWS8
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
White
Red
Green
Blue
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
Gray
Center speaker
SP-THS9C
Red
Black
Silver
4 m
Copper
Front speakers
SP-THS9F
Surround speakers
SP-THS9S
4 m
10 m
CAUTION
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
Continued on next page
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This page is for
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Speaker cord (supplied)
4 m
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals
referring to the table below:
Front speakers
SP-THS5F
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
White
Red
Green
Blue
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT) Gray
Powered subwoofer
SP-PWS5
4 m
10 m
Center speaker
SP-THS5C
Surround speakers
SP-THS7S
(Bottom)
Silver
Black
Copper
Red
Route the speaker cord
through the hole on the
bracket.
• When installing the satellite speakers on the wall;
CAUTION
•
Be sure to have them installed on the wall by a qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
•
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
• DO NOT connect more than one speaker to one speaker terminal.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
7 To connect a TV equipped with the component video
Speaker layout
input jacks
Center unit
COMPONENT VIDEO OUT
Center speaker
TV
Y
P
B
PR
Front left
speaker
Front right
speaker
To component
video input
Powered
subwoofer
Component video cord (not supplied)
NOTE
• If your TV supports progressive video input, you can enjoy a high
quality picture by setting the progressive scan mode to active.
(A pg. 18)
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.
Surround left
speaker
Surround right
speaker
• The component video signals can be output only when you select
“DVD” as the source to play. (A pg. 17)
NOTE
• Although the satellite speakers and the powered subwoofer are
magnetically shielded, the TV screen may appear mottled. In this
case, keep enough distance between the speakers and the TV.
• The speakers are magnetically shielded to avoid color distortions on
TVs. However, if not installed properly, they may cause color
distortions. So, pay attention to the following when installing the
speakers.
7 To connect a TV equipped with the composite video
or S-video jack
Center unit
Composite video cord
(supplied)
or
– When placing the speakers near a TV set, turn off the TV’s main
power switch or unplug it before installing the speakers. Then wait
at least 30 minutes before turning on the TV’s main power switch
again.
Some TVs may still be affected even though you have followed the
above. If this happens, move the speakers away from the TV.
• Place the satellite speakers on a flat and level surface.
• Be sure to place the powered subwoofer to the TV’s right. If you place
the powered subwoofer to the TV’s left, keep sufficient distance
between them to prevent the TV screen from appearing mottled.
S-video cord
(not supplied)
Align the 5 marks.
To composite
video input
TV
NOTE
• Select the appropriate scan mode according to your TV. See
“Changing the scan mode” (A pg. 18).
Connecting a TV
• You can get better picture quality in the order — Component
video > S-video > Composite video.
• Distortion of picture may occur when connecting to the TV via a
VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu
correctly according to the aspect ratio of your TV. (A pg. 37)
Connecting the powered
subwoofer
Powered
subwoofer
Center unit
System cord
(supplied)
Align the 5 marks.
Align the 5 marks.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an analog
component
Setting the VOLTAGE
SELECTOR switch
(except for Hong Kong
and Australia)
You can enjoy the sound of an analog component.
Center unit
LEFT
To avoid damaging the powered subwoofer, set the VOLTAGE
SELECTOR switch to the voltage of your area.
RIGHT
When you change the position of the VOLTAGE SELECTOR
switch, use a tool such as a slotted screwdriver, etc.
AUDIO IN
(VCR)
CAUTION
DO NOT plug the power cord of the powered subwoofer
before setting the VOLTAGE SELECTOR switch to the
correct voltage.
S-video cord
(not supplied)
RCA pin plug cord
(not supplied)
or
Composite video
cord
(not supplied)
A
B
C
VCR (A C or B C)
TV (C)
Cassette recorder (C)
Powered subwoofer
A To composite video output
B To S-video output
C To audio output
Connecting the power
cord
NOTE
• The signals input to the VIDEO VCR IN jack will be output only from
Make sure that all other connections have been completed.
the VIDEO OUT jack, not from the S-VIDEO OUT jack.
Center unit
Powered
subwoofer
Connecting to a digital
component
AC IN
You can enjoy the sound of a digital component.
Center unit
DBS* tuner
MD recorder
Power cord
(supplied)
Power cord
OPTICAL
Plug into AC outlets.
To digital optical
output
Digital optical cord
(not supplied)
DIGITAL
IN
(DBS)
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
• If the AC outlets do not match the AC plugs, use the supplied AC plug
adaptors. (except for Hong Kong and Australia)
* DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting “DBS” as the
source to play. (A pg. 17) When connecting a video component such
as a DBS tuner, operate this system to listen to the sound.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating external components with the remote control
4 Press number buttons (1-9, 0) to enter
The buttons described below are used on pages 14 and
15.
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV:
Press 1, then 0.
For a Toshiba TV:
Press 0, then 8.
Manufacturer
JVC
Code Manufacturer
Code
12
01
10
02
03
Samsung
Sharp
Hitachi
06
Magnavox
Mitsubishi
Panasonic
RCA
Sony
07
Remote control
mode selector
Toshiba
08
04, 11 Zenith
05
09
(play button)
5 Release F TV.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
7 Operation
Aim the remote control at the TV.
IMPORTANT
Number
buttons
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
The following buttons are available:
F TV:
TV VOL +/–:
TV/VIDEO:
Turns TV on and off.
Adjusts the volume.
Selects the input mode (either TV or
VIDEO).
CHANNEL +/–:
Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN: Alternates between the previously selected
channel and the current channel.
NOTE
• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.
Operating the DBS tuner
or CATV converter
Operating the TV
7 To set the manufacturer’s code
You can operate a JVC TV without setting the manufacturer’s code.
7 To set the manufacturer’s code
1 Slide the remote control mode selector
1 Slide the remote control mode selector
to TV.
to VCR/DBS.
2 Press and hold F TV.
2 Press DBS.
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.
3 Press and hold F VCR/DBS.
4 PKereepsthse bEutNtonTpEreRss.ed until step 5 is finished.
Continued on next page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 14 for button locations.
Operating external components with the remote control
5 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
5 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a GI Jerrold product:
Examples:
For a Philips VCR:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
Press 0, then 9.
For an NEC VCR:
Press 2, then 5.
Manufacturer
Echostar
GI Jerrold
Hamlin
Code
Manufacturer Code
Manufacturer Code
21
JVC
01, 02, 03
Philips
RCA
09
01, 02, 03, 04, 05, 06, 07, 08
Emerson
Fisher
11, 26
29
05, 06
24
15, 16, 17, 18
13, 14
19
Samsung
Pioneer
Funai
10, 14, 15, 16 Sanyo
21, 22, 23
27, 28
30
RCA
Gold Star
Hitachi
Mitsubishi
NEC
12
Sharp
Scientific Atlanta
Sony
09, 10
20
04
Shintom
Sony
13
18, 19, 20
08
Zenith
11, 12
25
Zenith
Panasonic
07, 17
6 Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
6 Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the DBS tuner or CATV converter.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector to
VCR/DBS.
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector to
2 Press DBS.
VCR/DBS.
2 Press VCR.
The following buttons are available:
F VCR/DBS:
Turns DBS tuner or CATV converter on and
off.
Changes the channels.
The following buttons are available:
F VCR/DBS: Turns VCR on and off.
3 (play button): Starts playback.
CHANNEL +/–:
1-10, 0, +10 (100+): Selects the channel.
7 :
8 :
y
Stops operation.
Pauses playback.
Fast forwards video tape.
Rewinds video tape.
:
1:
Operating the VCR
REC:
Press this button together with 3 (play button) to
start recording or together with 8 to pause
recording.
7 To set the manufacturer’s code
CHANNEL +/–: Changes the TV channels on the VCR.
1 Slide the remote control mode selector
to VCR/DBS.
NOTE
When operating a VCR or DBS tuner/CATV converter;
2 Press VCR.
• The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR or DBS after setting the remote control mode selector.
3 Press and hold F VCR/DBS.
4 PKereepsthse bEutNtonTpEreRss.ed until step 5 is finished.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
otherwise noted.
On the remote control:
Press F AUDIO.
IMPORTANT
Before using the remote control for the following
operation;
On the center unit:
Press F.
• Set the remote control mode selector to AUDIO.
When DVD is selected as the source (A pg. 17), the following
messages will appear on the TV screen.
The buttons described below are used on
pages 16 to 19.
F AUDIO
MUTING
DVD
FM/AM
VCR
DBS
Source
selecting
buttons
• “OPEN”/“CLOSE”:
Appears when opening or closing the disc tray.
• “NOW READING”:
AUDIO VOL
Appears when the system is reading the disc information.
• “REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
AUDIO
Remote control
mode selector
• “NO DISC”:
Appears when no disc is loaded.
• “CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
Cursor
(3/2/Y/5)/
ENTER
ENTER
NOTE
• The STANDBY lamp turns on when the power is turned off and turns
off when the power is turned on.
• The power supply to the subwoofer is linked to the center unit. The
POWER ON lamp on the subwoofer lights green when the power is
turned on.
SCAN MODE
• A small amount of the power is consumed even when the power is
turned off (center unit only). This is called standby mode and the
STANDBY lamp lights in this mode. Unplug the power cord from the
AC outlet to turn the power off completely.
TREBLE
SMART
SLEEP DIMMER S.SETUP
S.WFR CENTER
L-SURR.-R
• You can also turn on the system by pressing the following buttons;
•
•
•
OPEN/CLOSE on the remote control or 0 on the center unit
One of the source selecting buttons on the remote control
3 on the center unit. You can use the same buttons on the remote
control except after pressing FM/AM.
STANDBY
VOLUME
PHONES
16
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Basic operations
Selecting the source to
play
Listening with headphones
(not supplied)
On the remote control:
Be sure to turn down the volume;
(DVD, FM/AM, VCR or DBS).
• Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
• Before disconnecting headphones as high volume may be suddenly
output from the speakers.
DVD: To play back a disc (DVD VIDEO, VCD etc.). (A pg. 20)
FM/AM: To tune in an FM or AM station. (A pg. 39)
Each time you press the button, the band alternates
between FM and AM.
While connecting a pair of headphones to the PHONES jack on the
center unit, the system automatically cancels the surround mode
(A pg. 24) currently selected, deactivates the speakers, turn the
subwoofer’s power off, and activates the headphone mode.
“HEADPHONE” appears on the display window.
VCR: To select the source from a component connected to the
VCR IN jacks and AUDIO IN (VCR) jacks. (A pg. 13)
DBS: To select the source from a component connected to the
DIGITAL IN (DBS) jack. (A pg. 13)
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are
output from the headphones.
• Multi-channel signals are down-mixed and output from the
headphones.
• (DVD AUDIO) When the disc prohibits down-mixing, only the
front left and right channels are output from the headphones. In
this case, “L/R ONLY” appears on the display window for a few
seconds.
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
NOTE
• When AM, FM or DBS is selected as the source, the system does not
output video signals.
• It may take time to change the source.
Adjusting the volume
[VOLUME]
Turning off the sound
temporarily [MUTING]
CAUTION
Press MUTING.
• Always set the volume to minimum level before starting any source.
If the volume is set at its high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
To restore the sound
Perform one on the following:
• Press MUTING again.
• Press AUDIO VOL +/– (or turn VOLUME on the center unit).
On the remote control:
Press AUDIO VOL + or –.
On the center unit:
Adjusting the brightness
of the indications
[DIMMER]
Turn VOLUME.
Press DIMMER.
Each time you press the button, the brightness level changes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Basic operations
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Changing the scan mode
The system can be accommodated to your TV’s scan mode.
NOTE
Press SLEEP.
Each time you press the button, the shut-off time changes.
• To use the system in PROGRESSIVE mode, it is required that the
center unit is connected to the TV by using a component video cord
(not supplied). (A pg. 12)
Example:
minutes
7 While DVD is selected as the source and stopped
1 Press and hold SCAN MODE for
S L E E P 6 0m i n
2 seconds.
2 PCurreresntslyCseulecrtsedomro3de a/2ppeatros osnethleedcistpltahyewidndeosw.ired
To check the remaining time
Press SLEEP once.
mode.
• PAL:
Select this when your TV supports the
PAL interlaced video input only.
Select this when your TV equipped with
component jacks supports the PAL
progressive video input.
To change the remaining time
Press SLEEP repeatedly.
• PAL PROG.:
To cancel
Press SLEEP repeatedly until “SLEEP OFF” appears.
• Turning off the power also cancels the Sleep Timer.
• NTSC:
Select this when your TV supports the
NTSC interlaced video input only.
• NTSC PROG.: Select this when your TV equipped with
component jacks supports the NTSC
progressive video input.
You can get better picture quality in “PAL PROG.” or “NTSC
PROG.” mode than in PAL or NTSC mode.
Adjusting the output level
of the subwoofer and
center/surround speakers
[SUBWFR, CENTER,
SURR L/R]
Press S.WFR +/– to adjust the subwoofer.
Press CENTER +/– to adjust the center
speaker.
3 Press ENTER while the selected mode
is displayed.
When “PAL PROG.” or “NTSC PROG.” is selected, the
PROGRESSIVE indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
Press SURR.-L +/– to adjust the surround
left speaker.
Press SURR.-R +/– to adjust the surround
right speaker.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to “PAL” or “NTSC ”.
To check the compatibility of your TV, contact your local JVC
customer service center.
NOTE
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
• You can also make adjustments by using the setup menu shown on the
TV screen. (A pg. 37)
• The adjustments take effect for all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
Adjusting the treble
sound [TREBLE]
Press TREBLE +/–.
NOTE
• The adjustments take effect for all sources.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Basic operations
When “FAILED !” appears on the TV screen
The system could not detect the clapping sound correctly. In such a
• When the system detects the clapping sound as “FAILED !” three
times, set the distance (DISTANCE) and the output level
(LEVEL) manually (A pg. 37).
Optimizing the speaker
settings [Smart Surround
Setup]
NOTE
To cancel
• When you change the positioning of the speakers or listener, or
replace the supplied speakers with other ones, perform Smart
Surround Setup again.
Press SMART S.SETUP.
NOTE
• You need to set the subwoofer’s output level (LEVEL) manually.
(A pg. 18 and 37)
7 While DVD is selected as the source and stopped
• In step 2, “SW ERROR” appears on the display window if the center
unit and the powered subwoofer are not connected correctly by using
the supplied system cord.
1 Take your position where you listen to
the sound.
2 Press and hold SMART S.SETUP.
3 “PSrEeTsTIsNGEUNPT”EflaRsh,espornetshesdiCspulayrswoinrdoYw. /5 to
select the distance between the front
speakers and the listening position,
then press ENTER.
4 Press Cursor Y/5 to select START,
then press ENTER.
5 Clap your hands over your head once.
6 Make sure that “COMPLETED !”
appears on the TV screen, then press
SMART S.SETUP.
The system detects your clapping sound through the satellite
speakers, then automatically makes the best settings for each
speaker. “COMPLETED !” appears on the TV screen when
Smart Surround Setup completes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
• The icon such as
available for.
shows the types of discs the operation is
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
1 Press OPEN/
CLOSE.
• The system turns on and the
disc tray comes out.
2 P• l0acoen thae dceinstecr .unit can also be used.
The buttons described below are used on pages 20 to 23.
When placing an 8 cm
disc
Label side up
OPEN/CLOSE
DVD
FL DISP.
3 Press 3 (play button).
AUDIO
(play button)
Remote control
mode selector
For MP3/WMA disc
The file control display (A pg. 28) appears on the TV screen.
For JPEG disc
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (A pg. 28) appears on the TV screen.
ENTER
For MPEG4 disc
Pressing TOP MENU or MENU shows the file control display
(A pg. 28) on the TV screen during playback.
TITLE/GROUP
7 To pause playback
Press 8.
To return to playback, press 3 (play button).
Number buttons
100+
7 To stop
Press 7.
7 On-screen guide icons
During DVD VIDEO playback, the following guide icons may
appear for a while on the TV screen;
•
•
•
•
: appears at the beginning of a scene containing multi-
subtitle languages.
: appears at the beginning of a scene containing multi-audio
languages.
: appears at the beginning of a scene containing multi-angle
views.
(Play),
(Pause),
/
(Fast forward/
fast-reverse),
/
(Slow-motion forward/
reverse): appears when you perform each operation.
•
: the disc cannot accept an operation you have tried to do.
Continued on next page
20
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Playback
MP3/WMA disc
Example:
When an MP3 disc is played back
NOTE
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
• If you do not want the on-screen guide icons to appear, see page 38.
Signal and speaker
indicators
Track number
7 Playback information on the display window
DVD VIDEO
Example:
T R 1 2 3 1 2 : 3 4
When a DVD VIDEO encoded with Dolby Digital 5.1ch is played
MP3 indicator*2
Elapsed playing time (minute:second)
(during playback only)
Elapsed playing time
(hour:minute:second)
Chapter number
Pressing FL DISP.
C 1 0 : 0 2 : 3 1
2
Group number
*
Signal and speaker indicators (A pg. 25)
Surround mode and digital signal format (A pg. 24)
MP 3 G 1 2 T 1 2 3
Track number
Pressing FL DISP.
*2 WMA indicator lights for WMA disc.
Title number
Chapter number
JPEG disc
Group number
File number
D V D T 1 C 1
J P G G 1 2 F 1 2 3
DVD AUDIO
Signal and speaker indicators
MPEG4 disc
Track number
T 1 1 : 2 3 : 4 5
T R 1 2 3 1 0 : 3 1
Track number
Elapsed playing time
(hour:minute:second)
Elapsed playing time (minute:second)
(during playback only)
Pressing FL DISP.
Group number
Pressing FL DISP.
Group number
Track number
Track number
D V D A G 1 T 1
VCD/SVCD/CD
Signal and speaker indicators
Example:
When a CD is played back
Track number
Signal and speaker
indicators
NOTE
• You can change the time information mode (except for MP3/WMA/
JPEG/MPEG4). (A pg. 26)
• You can also check the playback information on the TV screen.
(A pg. 25)
C D 1 1 0 : 3 1
1
Elapsed playing time (minute:second)
*
*1 VCD indication appears for VCD/SVCD.
NOTE
• When a VCD or SVCD with PBC function is played, the elapsed
playing time does not appear, but “PBC” appears.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Playback
7 Screen saver
Skip to the beginning of a
desired selection
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 37.
7 Using x/4 buttons
7 For DVD VIDEO (chapter):
During playback
For VCD/SVCD (track):
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
During playback without PBC function
For DVD AUDIO/CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Press x or 4 repeatedly.
7 During playback
NOTE
On the remote control:
• When playing back an MP3/WMA disc, you can make operations
using the file control display. (A pg. 28)
• This feature may not work for some discs.
Press
.
NOTE
7 Using number buttons on the remote control
• This function works in the same title.
• This feature may not work for some discs.
7 For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For DVD AUDIO (track):
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Fast-forward/fast-reverse
search
7 During playback
On the remote
control:
Press number buttons (0-10, +10) to select
the desired number.
• For details on using the number buttons, see “How to use the
number buttons” below.
Press y or 1.
Each time you press the button, the search speed changes (M2,
M5, M10, M20, M60).
How to use the number buttons
To return to normal speed playback
Press 3 (play button).
To select 3:
To select 14:
To select 24:
To select 40:
Press 3.
Press +10, then 4.
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (M5 → M20).
Press +10 twice, then 4.
Press +10 three times, then 10.
Or press +10 four times, then 0.
NOTE
• The operation with x or 4 above is available for a disc other
than MPEG4 disc.
• When a DVD VIDEO, VCD, SVCD, or MPEG4 disc is played back,
no sound comes out during fast-forward/reverse search.
• When a DVD AUDIO or CD is played back, sound is intermittent and
low during fast-forward/reverse search.
• This feature may not work for some discs.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 20 for button locations.
Playback
Locating a desired title/
group using number
buttons
Playing back a bonus
group
Some DVD AUDIOs have a special group called “bonus
To play back a bonus group, you have to enter the specific “key
number” (a password). The way of getting the key number depends
on the disc. After getting the key number, you can play back the
bonus group by following the procedure below.
7 During playback or while
1stPoprpeedss TITLE/
GROUP.
“_ _” or “_” is shown in the title/group display area in the
display window.
7 While the BONUS indicator lights up on the display window
Example:
During DVD VIDEO playback
1 Select the bonus group.
For selecting the group, see “Locating a desired title/group
using number buttons” described above.
_ _
T
1 : 2 3 : 4 5
The key number entry indication appears.
On the TV
2 While the display window shows “_ _”
or “_”, use number buttons (0-10, +10)
to enter the desired title or group
number.
On the display window
_ _ _ _
K E Y
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see “How to use the
number buttons” (A pg. 22).
2 Press number buttons (0-9) to enter the
key number, then press ENTER.
NOTE
When you enter the correct key number, playback starts and
the BONUS indicator goes off.
• This feature may not work for some discs.
• If you enter the wrong number, reenter the correct number.
To clear the key number entry
Perform whichever one of the following:
• Press 7.
• Open the disc tray.
• Turn off the system.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• The icon such as
shows the types of discs the operation is
Using the surround mode
7 Auto Surround (AUTO SURR)
Used to reproduce the sound as it is recorded without any
conversion (downmixing or simulation, etc.). For example, a
multichannel source is automatically reproduced in multichannel
audio.
available for.
IMPORTANT
Before using the remote control for the following
operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
• There are exceptions in the operation mentioned above. In such a
case, follow each instruction.
7 Dolby Surround
Dolby Pro Logic II*1
The buttons described below are used on pages 24 to 35.
Dolby Pro Logic II has a newly developed multichannel playback
format to decode all 2 channel sources — stereo source and Dolby
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music
mode:
AUDIO SUBTITLE SURR.
AUDIO
(play button)
Remote control
mode selector
• Pro Logic II Movie (PL II MOVIE)
Suitable for reproduction of Dolby Surround encoded sources
bearing the mark
.
• Pro Logic II Music (PL II MUSIC)
Suitable for reproduction of any 2 channel stereo music sources.
TOP MENU
MENU
Dolby Digital*1
Used to reproduce multichannel soundtracks of the software
encoded with Dolby Digital (
).
ENTER
Cursor
(3/2/Y/5)/
ENTER
ON
2
SCREEN
7 DTS Digital Surround*
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel
digital audio format available on CD and DVD software.
ANGLE
ZOOM
PAGE
Number buttons
100+
REPEAT A-B RPT PLAY MODE CANCEL
SETTING
RETURN
VFP
Available Surround modes for each input signal
The B marks show available surround modes.
*1
Surround
off
Auto
DTSDigital Linear Packed
Manufactured under
license from Dolby
Laboratories. “Dolby”,
“Pro Logic”, “MLP
Lossless”, and the
double-D symbol are
trademarks of Dolby
Laboratories.
“DTS” and “DTS
Digital Surround” are
registered trademarks
of Digital Theater
Systems, Inc.
Mode
Dolby Surround
DSP
Surround
Surround
PCM
PCM
ALL
CH
AUTO
SURR
PL II
PL II
Dolby
Signal
SURR OFF
DTS
LPCM
PPCM
MOVIE*3 MUSIC*3 Digital
ST.*3
Dolby Digital
(Multichannel)
B
B
B
B
—
—
B
—
—
—
—
—
—
—
Dolby Digital
(2 channel)
B
B
—
B
*2
*3
DTS Digital
Surround
(Multichannel)
B
B
B
B
—
—
—
—
B
—
—
—
—
—
DTS Digital
Surround
(2 channel)
B
B
—
B
You can select these
modes by pressing
SURR.. (A pg. 25)
Analog (VCR) or
Linear/Packed
PCM
B
B
B
B
B
B
—
—
—
—
—
—
B
(2 channel)
Linear/Packed
PCM
(Multichannel)
—
—
B
B
—
Continued on next page
24
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
7 All Channel Stereo (DSP)
7 When playing back digital multichannel software
(except during SURR OFF mode)
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear/Packed PCM) is automatically selected.
All Channel Stereo (ALL CH ST.) mode can reproduce a larger
stereo sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo
source.
Normal stereo sound
All Channel Stereo
7 When playing back 2 channel source
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or the DSP (ALL CH ST.) mode.
Press SURR. repeatedly to select the
desired mode.
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes.
7 Indicators on the display window
Digital signal format indicators
For details on each mode, see page 24.
PPCM:
Lights when DVD AUDIO packed PCM signals
comes in.
To turn off the surround mode
Press SURR. repeatedly until SURR OFF
appears on the display window.
LPCM:
GD:
C:
Lights when Linear PCM signal comes in.
Lights when Dolby Digital signals come in.
Lights when DTS Digital (Surround) signals
come in.
No digital signal indicator lights when analog
signals come in.
Storing adjustments — auto memory
No indication:
When you turn the power off, the system memorizes the current
surround mode. The memorized mode is automatically recalled
when you turn the power on.
Dolby Surround/DSP mode indicators
GPLII: Lights when Dolby Pro Logic II mode is activated.
NOTE
DSP:
Lights when All Channel Stereo mode is activated.
• When FM or AM is selected as the source, you cannot select any
surround mode.
Source signal indicators, etc.
• Note that the surround mode takes no effect on MPEG4 playback.
• For a down-mixing prohibited DVD AUDIO disc, the system
continues to output multi-channel signals with “MULTI CH” shown
on the display window even if the surround mode is turned off during
playback. On the other hand, the system outputs only the front left and
front right channel signals with “LR ONLY” shown on the display
window when you start playback with the surround mode having been
set to “SURR OFF”.
Light to indicate the incoming signals.
a: Lights when the left channel signal comes
in.
b: Lights when the center channel signal comes in.
c: Lights when the right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes in.
h: Lights when the monaural surround channel signal or 2
channel Dolby Surround signal comes in.
SW : Always lights.
Using the on-screen bar
You can check disc information and you can use some functions
using the on-screen bar.
The channel with “ ” shows that the corresponding speakers are
reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is reproduced, only
“
” lights.
Showing the on-screen bar
7 Whenever a disc is
Selecting the surround mode
loaded
The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
Press ON SCREEN.
Each time you press the button, the on-screen bar changes as
follows on the TV screen.
IMPORTANT
Before using the remote control for the following
operation;
Example:
During DVD VIDEO playback
• Set the remote control mode selector to AUDIO.
OFF
(The on-screen bar disappears)
(back to the beginning)
• The currently selected item shows green.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
F Shows playback status.
appears during playback.
: appears during fast forward/reverse.
7 Contents of the on-screen bar during playback
DVD VIDEO
:
/
/
: appears during playback in forward slow-motion/
reverse slow-motion.
:
:
appears when stopped.
time information” below.
DVD AUDIO
H Select this for Repeat Playback. (A pg. 33)
I Select this for time search function. (A pg. 28)
J Select this for chapter (for DVD VIDEO) or track (for DVD
AUDIO) search function. (A pg. 27)
K Select this to change audio language, channel, or stream.
(A pg. 30)
L Select this to change subtitle language. (A pg. 29)
M Select this to change view angle. (A pg. 29)
N Select this to change the page. (A pg. 31)
O Shows Playback Mode status.
PROGRAM: appears during Program Playback. (A pg. 32)
RANDOM: appears during Random Playback. (A pg. 33)
P Shows Repeat Mode status. (A pg. 33)
VCD
SVCD
CD
Changing the time information
You can change the time
information in the on-screen
bar on the TV screen and the
display window of the center unit.
7 During playback
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
.
MPEG4*
3 Press ENTER repeatedly to select the
desired information.
* 7 – N are not available.
Example:
When elapsed playing time of disc is selected.
A Shows disc type.
B Shows current transfer rate (Megabits per second).
C Shows current title (for DVD VIDEO) or group (for DVD
AUDIO) number.
D Shows current chapter number (for DVD VIDEO) or track
number (for other type of discs).
• TIME: Elapsed playing time of current chapter/track
• REM:
Remaining time of current chapter/track
• TOTAL: Elapsed time of disc
• T. REM: Remaining time of disc
E Shows time information. See “Changing the time information”
below.
4 Press ON SCREEN.
The on-screen bar disappears.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
2 Press number buttons (1-10, +10) to
• For details on using the number buttons, see “How to use the
number buttons” (A pg. 22).
Playing from a specified
position on a disc
select the number of the desired item.
You can start playing a title, chapter or track you specify. You can
also play a disc from specified time.
To return to the menu
Press RETURN.
When “NEXT” or “PREVIOUS” is shown on the TV
Locating a desired scene from the DVD
menu
DVD VIDEOs generally have their own menus which show
disc contents and you can display them on the TV screen.
You can locate a desired scene by using these menus.
screen:
• To go to the next page, press x.
• To return to the previous page, press 4.
NOTE
• If you want to play a PBC-compatible VCD/SVCD without using the
PBC function, perform any of the following:
7 Whenever a DVD VIDEO is loaded
•
Start playback by pressing number buttons while stopped.
Press x repeatedly until the desired track number is displayed,
then start playback by pressing 3 (play button).
The track number appears on the display window instead of
“PBC”.
1 Press TOP MENU or MENU.
•
The menu appears on the TV screen.
Example:
• To activate the PBC function when playing a PBC-compatible VCD/
SVCD without using the PBC function, perform any of the following:
•
Press TOP MENU or MENU.
•
Press 7 twice to stop playback, then press 3 (play button).
Locating a desired chapter/track using the
on-screen bar
Normally, a DVD VIDEO which contains more than one title
will have a “top” menu which lists the titles. Press
TOP MENU to show the title menu.
Some DVD VIDEO may also have a different menu which is
shown by pressing MENU.
7 During playback
See the instructions for each DVD VIDEO regarding its
1 Press ON SCREEN twice.
2 pUarstieculCarumresnuo.r 3/2/Y/5 to select a
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
/
desired item.
.
3 Press ENTER.
3 Press ENTER.
• With some discs, you can also select items by entering the
corresponding number using number buttons.
Example:
During DVD VIDEO playback
Locating a desired scene using a VCD/
SVCD menu with PBC
A VCD or SVCD recorded with PBC has its own
menus such as a list of contained songs. You can
locate a specific scene by using these menus.
4 Press number buttons (0-9) to enter the
desired chapter number.
Example:
7 During playback with PBC function
To select 8:
To select 10:
To select 20:
To select 37:
Press 8.
1 Press RETURN repeatedly until the
Press 1, then 0.
Press 2, then 0.
Press 3, then 7.
menu appears on the TV screen.
Example:
To correct a misentry
5 RPerpeeastssteEp 4N. TER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• You can select up to the 99th chapter/track.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
Locating a desired position by specifying
the time
Using the file control
display
7 For DVD VIDEO/DVD
AUDIO:
You can search and play desired groups and
tracks/files using the file control display on
the TV screen.
During playback
For VCD/SVCD:
While stopped or during playback without PBC function
Current group/total group Playback mode (PROGRAM,
For CD:
number
RANDOM, REPEAT)
During playback or while stopped
Elapsed playing time of current
track (for MP3/WMA/MPEG4
only)
Tag information (for MP3/
WMA only)
7 When specifying the elapsed playing time from the
beginning of the disc
Perform the following procedure while stopped.
7 When specifying the elapsed playing time from the
beginning of the current title/track
Perform the following procedure during playback.
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
Current group
Current track (file)
4 Use number buttons (0-9) to enter the
Current track (file) / total track
(file) number on current group
Total track (file)
number on disc
time.
Example:
Playback status
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)
elapsed
The file control display appears automatically during playback
(MP3/WMA) or while stopped.
Press 2
Press 4
Press 3
Press 0
Press 8
To cancel a misentry
5 PPrersessCsursEorN2TrEepRea.tedly.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• You can specify time in hours/minutes/seconds for DVD VIDEO/
DVD AUDIO and in minutes/seconds for VCD/SVCD/CD.
Continued on next page
28
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
7 For MP3/WMA:
2 Press ANGLE repeatedly or press
Cursor Y/5 to select the desired view
angle.
During playback or while stopped
For JPEG/MPEG4:
1WPhirleesstosppCedursor 3/2/Y/5 to select the
When using the on-screen bar:
desired group/track/file.
1 Press ON SCREEN twice.
2 •PrFeorsMsP33/WM(pAl,apylaybbauctktsotanrts)forormEthNe sTelEecRted. track.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
file.
• When you press ENTER for JPEG, only the selected file is
played back.
NOTE
• During playback, you can locate the desired track/file by pressing
x/4 or Cursor 5/Y.
• You can also check playback information on the display window.
(A pg. 21)
depending on recording conditions.
• The order of groups, tracks and files may be displayed differently
from the order displayed on your personal computer.
4 Press Cursor Y/5 to select the desired
view angle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
When Resume Playback is set to
• During DVD AUDIO playback, this feature is available only for the
video part.
“ON” (A pg. 38) and you stop
playback by the following
operations, the position where playback has been stopped is stored.
(“RESUME” appears on the display window.)
• Turning off the power (A pg. 16)
• Pressing 7 once
Selecting the subtitle
7 During playback of a disc containing
subtitles in several languages
• Changing the source (A pg. 17)
When using the SUBTITLE button:
To start playback from the stored position
Press 3 (play button) or DVD.
• There may be a case where 3 (play button) does not work after
1 Press SUBTITLE.
Example (DVD VIDEO):
changing the source.
“ENGLISH” is selected out of 3 subtitle languages recorded.
To clear the stored position
Press 7 again or open the disc tray.
Selecting a view angle
2 Press Cursor Y/5 to select the desired
subtitle.
7 During playback of a disc containing multi-view
angles
For SVCD
When using the ANGLE button:
• An SVCD can contain up to four subtitles. Pressing
SUBTITLE changes the subtitles regardless of whether the
subtitles are recorded or not. (Subtitles will not change if no
subtitle is recorded.)
1 Press ANGLE.
Example:
The first view angle is selected out of 3 view angles recorded.
NOTE
• To clear the subtitle, press SUBTITLE. Each time you press
SUBTITLE, subtitle appears and disappears alternately.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
When using the on-screen bar:
4 Press Cursor Y/5 to select the desired
audio.
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list” (A pg. 36).
• “ST”, “L” or “R” is displayed when playing a VCD or SVCD
respectively representing “stereo”, “left sound” and “right sound”.
4 Press Cursor Y/5 repeatedly to select
the desired subtitle.
Special picture playback
5 Press ENTER.
6 Press ON SCREEN.
Frame-by-frame playback
7 During playback
The on-screen bar disappears.
NOTE
Press 8 repeatedly.
Each time you press the button, the
still picture advances by one frame.
• To clear the subtitle, press SUBTITLE. Each time you press
SUBTITLE, subtitle appears and disappears alternately.
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list” (A pg. 36).
• During DVD AUDIO playback, this feature is available only for the
video part.
To return to normal playback
Press 3 (play button).
NOTE
• During DVD AUDIO playback, this feature is available only for the
video part.
Selecting the audio
7 During playback of a disc
containing audio in several
languages
Playing back in slow-motion
7 During playback
When using the AUDIO button:
1 Press 8 at the point
where you want to start playback in
slow-motion from.
1 Press AUDIO.
Example (DVD VIDEO):
2 PThreessysstemypaus.es playback.
“ENGLISH” is selected out of 3 audio languages recorded.
• Playback in forward slow-motion starts.
For DVD VIDEO/DVD AUDIO only:
• To play back in reverse slow-motion, press 1.
2 Press AUDIO repeatedly or press
Cursor Y/5 to select the desired audio.
Each time you press the button, the playback speed become
faster.
Example: On the TV
When using the on-screen bar:
1 Press ON SCREEN twice.
To return to normal playback
Press 3 (play button).
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
NOTE
• Sound cannot be heard during slow-motion playback.
• During DVD AUDIO playback, this feature is available only for the
video part.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
Selecting browsable still picture recorded
on DVD AUDIO
NOTE
• The number of the magnification steps varies depending on the disc
type.
Most DVD AUDIOs include browsable still pictures
(B.S.P.), which usually appear by turns automatically
during playback according to the playback sequence. You
can change the picture (turn the page) manually when the current
group/track has selectable pictures (pages).
• During slide-show playback of a JPEG disc, zooming in is not
available. In such a case, press 8 to pause slide-show playback, then
zoom in.
• During DVD AUDIO playback, this feature is available only for the
video part.
• During MPEG4 playback, there may be a case where Cursor (3/2/
Y/5) does not work in step 2 above.
7 During playback and while the B.S.P. indicator lights up on the
display window
When using the PAGE button:
Changing the VFP setting
Press PAGE repeatedly to select a desired
still picture.
The VFP (Video Fine
Processor) function
enables you to adjust
the picture character according to the type of programming, picture
tone or personal preference.
When using the on-screen bar:
1 Press ON SCREEN twice.
7 During playback
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
1 Press VFP.
The current VFP settings appear on the TV screen.
Example:
4 Press Cursor 5/Y to select the desired
still picture.
5 Press ENTER.
2 Press Cursor 3/2 repeatedly to select
the VFP mode.
6 Press ON SCREEN.
• CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP to
complete the setting.
The on-screen bar disappears.
Zooming in
• USER 1 and USER 2:
7 Duringplaybackor
You can adjust parameters that affect picture
appearance.
while paused
Only when selecting “USER 1” or “USER 2” in step
1 Press ZOOM.
2, proceed to perform the following operation;
2 WEachhitlimeezyoouopmresesdZOinO,Mp, srceensesmCagunirfiscaotiorn3cha/n2ges/Y. /
5 to move zoom-in area.
3 Press Cursor Y/5 repeatedly to select
a parameter you want to adjust.
Adjust gradually and confirm picture appearance results are as
preferred.
To return to normal playback
Press ZOOM repeatedly to select ZOOM OFF.
• GAMMA:
Controls brightness of neutral tints while maintaining
brightness of dark and bright portions.
• BRIGHTNESS:
Controls screen brightness.
• CONTRAST:
Controls screen contrast.
• SATURATION:
Controls screen color depth.
• TINT:
Controls screen tint.
• SHARPNESS:
Controls screen sharpness.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
4 Press ENTER.
2 Follow the instructions that appears on
the TV screen to program the desired
chapters/tracks.
Example:
• The content’s numbers that you have to specify for
programming varies depending on the disc type:
5 Press Cursor Y/5 to change the
setting.
•
•
•
DVD VIDEO:
VCD, SVCD, CD:
DVD AUDIO, MP3, WMA:
Groups and tracks
Titles and chapters
Tracks
6 Press ENTER.
7 TRhee pcuerraentt sVtFePpsesttin3gstoapp6eatroagaaind.just other
• Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of “Playing back a bonus
group” (A pg. 23) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is up to
99.
• (For CD, SVCD or VCD) When the total playback time
exceeds 99 minutes 59 seconds, “–:–” will appear on the
display window. But, it is possible to continue
programming.
parameters.
8 Press VFP.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
• (For DVD VIDEO, DVD AUDIO, MP3 or WMA) When
you press ENTER instead of the number buttons in the
Track/Chaper column, “ALL” appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
Program Playback
7 While stopped
To clear the programs one by one from the last
entered number
Press CANCEL repeatedly.
To clear all programs
Press 7.
1 Press PLAY MODE repeatedly until
program window appears on the TV
screen.
You can also clear the program by turning off the system.
3 Press 3 (play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press 7. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and
disappear from the TV screen.
NOTE
• The Resume function cannot be used with Program Playback.
• Program Playback may not work for some discs.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
Display
window
TV screen
Meanings
Random Playback
You can play titles or
tracks on a disc in
random order.
Repeats the current group for
DVD AUDIO/MP3/WMA/
JPEG/MPEG4 disc.
REPEAT GROUP
Repeats the current title for
DVD VIDEO.
7 While stopped
1 Press PLAY MODE repeatedly until
Repeats all tracks/files for VCD/
SVCD/CD/MP3/WMA/JPEG/
MEPG4 disc.
ALL
1
appears on the TV screen.
REPEAT ALL
,
2 Press 3 (play button).
Repeats the current track for
DVD AUDIO/VCD/SVCD/CD/
MP3/WMA/MPEG4 disc.
To quit Random mode
REPEAT TRACK,
REPEAT STEP
While stopped, press PLAY MODE repeatedly until both program
window and
disappear from the TV screen.
,
Repeats the current chapter for
DVD VIDEO.
You can also clear the Random mode by turning off the system.
REPEAT STEP
NOTE
Repeat mode is off.
The system plays back the disc
normally.
No
indication
• The same title/track will not be played back more than once during
Random Playback.
NOTE
• For DVD VIDEO and DVD AUDIO, REPEAT ALL may not be
available depending on the disc.
Repeat Playback
When using the on-screen bar (except for MP3/
WMA/JPEG/MPEG4 disc):
Repeating the current selection
7 For DVD VIDEO:
During playback
For VCD/SVCD:
During playback without PBC
function or stopped
For DVD AUDIO/CD/MP3/
JPEG/MPEG4:
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
During playback or stopped
When using the REPEAT button:
Press REPEAT.
4 Press Cursor Y/5 repeatedly to select
C 1 1 : 3 1 : 0 1
the Repeat mode.
5 Press ENTER.
Repeat mode indicator
Each time you press REPEAT, the Repeat mode changes.
6 Press ON SCREEN.
The on-screen bar disappears.
To cancel Repeat Playback
Select “OFF” in step 4.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
To cancel
Select “OFF” in step 4, then press ENTER.
Repeating a desired part [A-B Repeat]
You can repeat playback of a
desired part by specifying the
beginning (point A) and
ending (point B).
NOTE
• When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
7 During playback
When using the A-B RPT button:
Tray lock
You can lock the tray and prohibit the unwanted disc ejection.
1 Press A-B RPT at the beginning of the
part you want to repeat (point A).
The repeat mode indicator “
” appears on the display
On the center unit ONLY:
While the system is turned off
window.
2 Press A-B RPT again at the end of the
part you want to repeat (point B).
The repeat mode indicator on the display window changes to
“
” and A-B Repeat Playback starts. The selected part
Press and hold
of the disc (between point A and B) is played repeatedly.
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
To cancel
Press A-B RPT during A-B Repeat Playback.
To cancel
Carry out the same operation again.
• The system turns on and “UNLOCKED” appears on the display
window.
When using the on-screen bar:
1 Press ON SCREEN twice.
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht
3 Press ENTER.
.
4 Press Cursor Y/5 repeatedly to select
“A-B”.
5 Press ENTER at the beginning of the
part you want to repeat (point A).
6 Press ENTER at the end of the part you
want to repeat (point B).
7 AP-rBeRsespeOat PNlaySbCackRsEtarEtsN. .
The on-screen bar disappears.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 24 for button locations.
Advanced operations
• M. OUT (Monitor Out):
Select the video output jack type by which you watch DVD
playback after connecting your TV. (A pg. 12)
Set the video output to use AV COMPU LINK remote
control system. (A pg. 41)
Sound and other settings
IMPORTANT
Before using the remote control for the following
VIDEO:
S:
To watch DVD playback via the VIDEO jack.
To watch DVD playback via the S-VIDEO jack.
operation;
• Set the remote control mode selector to
COMPNT (component):
To watch DVD playback via the
AUDIO.
NOTE
Before you start operation;
COMPONENT VIDEO OUT jacks.
3 Press Cursor 3/2 to make an
adjustment or selection.
Example:
• There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1 Press SETTING.
Example:
--
B A L : R
5
B A L : C E N T E R
The adjustment is set and the display automatically disappears
a few seconds later.
2 Press Cursor Y/5 to select the item
NOTE
you want to set.
• When “DOLBY D” or “DTS” is selected, if a signal encoded with
another digital format comes in, you cannot listen to the sound. (The
GD or C indicator flashes.)
• BAL (Balance):
You can adjust the balance between the front left and front
right speakers.
• DEC (Decode):
When you play an external source (DBS is selected as a
source) that was encoded with Dolby Digital or DTS Digital
Surround, the following symptoms may occur;
• No sound comes out at the beginning of playback.
• Noise comes out while searching for or skipping chapters
or tracks.
AUT/PCM (Auto/PCM):
Normally select this. The system automatically
detects the incoming signals.
DOLBY D: Select this if the symptoms above occur when
playing a disc (or software) encoded with
Dolby Digital.
DTS:
Select this if the symptoms above occur when
playing a disc (or software) encoded with DTS
Digital Surround.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
NOTE
Using the setup menus
• See the following “The language codes list” for the code of each
language, such as “AA”, etc.
• You can change the language used in the setup menus. See
“Menu description” below.
The language codes list
Basic operation on the setup menus
AA Afar
IK Inupiak
IN Indonesian
IS Icelandic
IW Hebrew
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
IMPORTANT
Before using the remote control for the
following operation;
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
1 Set the remote control mode selector to
JI
Yiddish
AUDIO.
2 Press DVD.
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
JW Javanese
TOP MENU
PTYMENU
KA Georgian
KK Kazakh
SG Sangho
SEARCH
SH Serbo-Croatian
SI Singhalese
SK Slovak
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
ENTER
Cursor
(3/2/Y/5)/
ENTER
ON
SCREEN
REC
SL Slovenian
SM Samoan
SN Shona
RDS
DISPLAY
BI Bislama
BN Bengali, Bangla KU Kurdish
SO Somali
SETUP
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
KY Kirghiz
LA Latin
SQ Albanian
SR Serbian
SS Siswati
7 While stopped
LN Lingala
LO Laothian
LT Lithuanian
ST Sesotho
SU Sundanese
1 Press SET UP.
CY Welsh
LV Latvian, Lettish SV Swedish
DA Danish
DZ Bhutani
EL Greek
MG Malagasy
MI Maori
SW Swahili
TA Tamil
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
TE Telugu
TG Tajik
EO Esperanto
ET Estonian
EU Basque
FA Persian
FI Finnish
FJ Fiji
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
MS Malay (MAY)
MT Maltese
2 Follow the instructions that appears on
the TV screen.
FO Faroese
FY Frisian
GA Irish
MY Burmese
NA Nauru
NE Nepali
Menu description
GD Scots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
NL Dutch
NO Norwegian
OC Occitan
TW Twi
UK Ukrainian
UR Urdu
:Language menu (LANGUAGE)
OM (Afan) Oromo
OR Oriya
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
• Select the initial language*.
HI Hindi
PA Panjabi
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
PL Polish
PS Pashto, Pushto
PT Portuguese
QU Quechua
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
• Select the initial audio language*.
RM Rhaeto-Romance ZU Zulu
7 SUBTITLE
Some DVDs have multiple subtitle languages.
• Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
• Select the language shown on the TV screen when operating this
system.
* When the language you have selected is not recorded to a disc,
the original language is automatically used as the initial
language.
Continued on next page
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
• AUTO
:Picture menu (PICTURE)
7 MONITOR TYPE
Select this when you want to enjoy surround sound with its
full dynamic range (no effect applied).
• ON
You can select the monitor type to match your TV when you play
DVDs recorded in the picture’s height/width ratio of 16:9.
• 16:9/16:9 MULTI (Wide television conversion)
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
Select this when you want to fully apply the compression
effect (useful at midnight).
NOTE
• When you play a multichannel Dolby Digital source with the
surround mode is off, the setting of D. RANGE COMPRESSION is
set to ON automatically.
• 4:3 LB/4:3 MULTI LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars appear on the top and the bottom of the screen.
• 4:3 PS/4:3 MULTI PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars do not appear, however, the left and right edges of
the pictures will not be shown on the screen.
:Speaker setting menu
(SPK. SETTING)
7 Level menu (LEVEL)
CENTER SPEAKER/SURROUND RIGHT SPEAKER/
SURROUND LEFT SPEAKER/SUBWOOFER
While monitoring the test tone, adjust the center and surround
speakers volume as much as that of the front speakers.
Ex.: 16:9
Ex.: 4:3 LB
Ex.: 4:3 PS
TEST TONE*
Outputs the test tone.
RETURN
NOTE
• Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size may
become “4:3 LB” or “4:3 MULTI LB” with some DVDs. This
depends on how DVDs are recorded.
• When selecting “MULTI” options as the monitor type for the multi-
color system TV, this system outputs PAL or NTSC video signal
according to the disc, regardless of the scan mode setting. (A pg. 18)
Returns to the SPK. SETTING menu.
* The test tone comes out of all of the activated speakers in the
following sequence:
s Front left speaker s Center speaker s Front right
speaker s Surround right speaker s Surround left
speaker s (back to the beginning)
7 PICTURE SOURCE
When you set the scan mode to PROGRESSIVE (A pg. 18), you
can obtain optimal picture quality by selecting whether the content
on the disc is processed by field (video source) or by frame (film
source).
NOTE
• Before you turn on the test tone, be sure to select AUTO SURR as the
surround mode. (A pg. 24)
Normally set to “AUTO”.
• AUTO
7 Distance menu (DISTANCE)
Used to play a disc containing both video and film source
materials.
This system recognizes the source type (video or film) of the
current disc according to the disc information.
• If the playback picture is unclear or noisy, or the oblique
lines of the picture are rough, try to change to other modes.
• FILM
Example:
Center
speaker
Subwoofer
Front right
Suitable for playing back a film source disc.
• VIDEO
Suitable for playing back a video source disc.
Front left
3.0 m
2.7 m
2.4 m
7 SCREEN SAVER (A pg. 22)
You can activate or deactivate Screen Saver function.
2.1 m
7 FILE TYPE
When several types of files are recorded on a disc, you can select
which files to play. If you have changed FILE TYPE setting, be
Surround left
Surround right
sure to turn the power off, then turn the power on to enable the new
setting.
In this case, set the distance of each speaker as follows;
• AUDIO
• Distance of front speakers:
• Distance of center speaker:
3.0 m
2.7 m
Select this to play MP3/WMA files.
• STILL PICTURE
Select this to play JPEG files.
• VIDEO
• Distance of surround speakers: 2.4 m
FRONT SPEAKER/CENTER SPEAKER/SURROUND
SPEAKER
Select this to play MPEG4 files.
Adjust the distance from the listening position to the speakers.
Within the range from 0.3 m to 9.0 m. (by 0.3 m)
:Audio menu (AUDIO)
7 D. RANGE COMPRESSION
RETURN
Returns to the SPK. SETTING menu.
(Dynamic range compression)
You can enjoy low level recorded sound clearly at night even at a
low volume when listening to the sound with Dolby Digital.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
SET LEVEL
Select this when you set the level of restriction.
PASSWORD
7 RESUME
You can activate or deactivate Resume Playback function.
(A pg. 29)
This item is selected automatically when some changes
are made on Parental Lock setting. Enter a four-digit
number as your password with number buttons 0-9, then
press ENTER.
7 ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons.
(A pg. 20)
• If you have failed to enter your correct password three
times, you cannot select an item other than EXIT. In such a
case, press ENTER to exit the mode, then try the setting
again.
7 Parental lock menu (PARENTAL LOCK)
EXIT
Returns to OTHERS menu.
You can restrict playback of a DVD VIDEO containing violent
scenes that is not suitable for your other family members.
• This setting takes effect only for DVDs containing the Parental
Lock level information — Level 1 (most restrictive) to Level 8
(least restrictive).
• Be sure to exit the Parental Lock setting mode after
entering your password. Otherwise, the changes you made
won’t be stored.
• If you forget your password, enter “8888” instead of your
password.
COUNTRY CODE
Select this when you set the code for your resident.
(A pg. 38)
NOTE
• When you enter wrong passwords three times, you can only select
EXIT.
Country/Area codes list for Parental Lock
A: AD (Andorra), AE (United Arab Emirates), AF (Afghanistan), AG
(Antigua and Barbuda), AI (Anguilla), AL (Albania), AM (Armenia),
AN (Netherlands Antilles), AO (Angola), AQ (Antarctica), AR
(Argentina), AS (American Samoa), AT (Austria), AU (Australia), AW
(Aruba), AZ (Azerbaijan)
M: MA (Morocco), MC (Monaco), MD (Moldova, Republic of), MG
(Madagascar), MH (Marshall Islands), ML (Mali), MM (Myanmar),
MN (Mongolia), MO (Macau), MP (Northern Mariana Islands), MQ
(Martinique), MR (Mauritania), MS (Montserrat), MT (Malta), MU
(Mauritius), MV (Maldives), MW (Malawi), MX (Mexico), MY
(Malaysia), MZ (Mozambique)
N: NA (Namibia), NC (New Caledonia), NE (Niger), NF (Norfolk
Island), NG (Nigeria), NI (Nicaragua), NL (Netherlands), NO
(Norway), NP (Nepal), NR (Nauru), NU (Niue), NZ (New Zealand)
O: OM (Oman)
B: BA (Bosnia and Herzegovina), BB (Barbados), BD (Bangladesh),
BE (Belgium), BF (Burkina Faso), BG (Bulgaria), BH (Bahrain), BI
(Burundi), BJ (Benin), BM (Bermuda), BN (Brunei Darussalam), BO
(Bolivia), BR (Brazil), BS (Bahamas), BT (Bhutan), BV (Bouvet
Island), BW (Botswana), BY (Belarus), BZ (Belize)
C: CA (Canada), CC (Cocos (Keeling) Islands), CF (Central African
Republic), CG (Congo), CH (Switzerland), CI (Côte d’Ivoire), CK
(Cook Islands), CL (Chile), CM (Cameroon), CN (China), CO
(Colombia), CR (Costa Rica), CU (Cuba), CV (Cape Verde), CX
(Christmas Island), CY (Cyprus), CZ (Czech Republic)
D: DE (Germany), DJ (Djibouti), DK (Denmark), DM (Dominica), DO
(Dominican Republic), DZ (Algeria)
P: PA (Panama), PE (Peru), PF (French Polynesia), PG (Papua New
Guinea), PH (Philippines), PK (Pakistan), PL (Poland), PM (Saint
Pierre and Miquelon), PN (Pitcairn), PR (Puerto Rico), PT (Portugal),
PW (Palau), PY (Paraguay)
Q: QA (Qatar)
R: RE (Réunion), RO (Romania), RU (Russian Federation), RW
(Rwanda)
E: EC (Ecuador), EE (Estonia), EG (Egypt), EH (Western Sahara), ER
S: SA (Saudi Arabia), SB (Solomon Islands), SC (Seychelles), SD
(Sudan), SE (Sweden), SG (Singapore), SH (Saint Helena), SI
(Slovenia), SJ (Svalbard and Jan Mayen), SK (Slovakia), SL (Sierra
Leone), SM (San Marino), SN (Senegal), SO (Somalia), SR
(Suriname), ST (Sao Tome and Principe), SV (El Salvador), SY (Syrian
Arab Republic), SZ (Swaziland)
T: TC (Turks and Caicos Islands), TD (Chad), TF (French Southern
Territories), TG (Togo), TH (Thailand), TJ (Tajikistan), TK (Tokelau),
TM (Turkmenistan), TN (Tunisia), TO (Tonga), TP (East Timor), TR
(Turkey), TT (Trinidad and Tobago), TV (Tuvalu), TW (Taiwan), TZ
(Tanzania, United Republic of)
U: UA (Ukraine), UG (Uganda), UM (United States Minor Outlying
Islands), US (United States), UY (Uruguay), UZ (Uzbekistan)
V: VA (Vatican City State (Holy See)), VC (Saint Vincent and the
Grenadines), VE (Venezuela), VG (Virgin Islands (British)), VI (Virgin
Islands (U.S.)), VN (Vietnam), VU (Vanuatu)
(Eritrea), ES (Spain), ET (Ethiopia)
F: FI (Finland), FJ (Fiji), FK (Falkland Islands (Malvinas)), FM
(Micronesia (Fedelated States of)), FO (Faroe Islands), FR (France),
FX (France, Metropolitan)
G: GA (Gabon), GB (United Kingdom), GD (Grenada), GE (Georgia),
GF (French Guiana), GH (Ghana), GI (Gibraltar), GL (Greenland), GM
(Gambia), GN (Guinea), GP (Guadeloupe), GQ (Equatorial Guinea),
GR (Greece), GS (South Georgia and the South Sandwich Islands), GT
(Guatemala), GU (Guam), GW (Guinea-Bissau), GY (Guyana)
H: HK (Hong Kong), HM (Heard Island and McDonald Islands), HN
(Honduras), HR (Croatia), HT (Haiti), HU (Hungary)
I: ID (Indonesia), IE (Ireland), IL (Israel), IN (India), IO (British Indian
Ocean Territory), IQ (Iraq), IR (Iran (Islamic Republic of)), IS
(Iceland), IT (Italy)
J: JM (Jamaica), JO (Jordan), JP (Japan)
K: KE (Kenya), KG (Kyrgyzstan), KH (Cambodia), KI (Kiribati), KM
(Comoros), KN (Saint Kitts and Nevis), KP (Korea, Democratic
People’s Republic of), KR (Korea, Republic of), KW (Kuwait), KY
(Cayman Islands), KZ (Kazakhstan)
W: WF (Wallis and Futuna Islands), WS (Samoa)
Y: YE (Yemen), YT (Mayotte), YU (Yugoslavia)
Z: ZA (South Africa), ZM (Zambia), ZR (Zaire), ZW (Zimbabwe)
L: LA (Lao People’s Democratic Republic), LB (Lebanon), LC (Saint
Lucia), LI (Liechtenstein), LK (Sri Lanka), LR (Liberia), LS (Lesotho),
LT (Lithuania), LU (Luxembourg), LV (Latvia), LY (Libyan Arab
Jamahiriya)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
Setting the AM tuner
interval spacing
Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing.
• 9 kHz interval spacing is the initial setting.
The buttons described below are used on pages 39 to 40.
On the center unit ONLY:
STANDBY
VOLUME
PHONES
7 When AM is selected as the source
To select the 10 kHz interval
Press and hold 7, then press 8. “10k STEP” appears on the display
window.
Remote control
mode selector
To select the 9 kHz interval
Press and hold 7, then press 3. “9k STEP” appears on the display
window.
Manual tuning
1 Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
Number buttons
8 1 0 k
2 Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 39 for button locations.
Tuner operations
Preset tuning
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
reception mode
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
7 To preset the stations
7 While listening to an FM station
1 Tune in the station you want to preset.
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
• AUTO MUTING:
When a program is broadcast in stereo, you will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations. The AUTO
MUTING indicator lights on the display window.
• MONO:
• If you want to store the FM reception mode for an FM
station, select the reception mode you want. See “Selecting
the FM reception mode” below.
Example:
When the system is tuned in to 103.50 MHz.
1 0 3 . 5 0 M
2 Press MEMORY.
Reception will be improved although you will lose the stereo
effect. (The ST indicator goes off.) In this mode, you will hear
noise until you are tuned in to a station. (The AUTO MUTING
indicator also goes off.)
While “CH” and “– –” are flashing:
Reducing the noise of AM
broadcast
When listening to an AM broadcast with a lot of noise interference,
you can change the Beat Cut mode to reduce the noise.
3 Press number button(s) (1-10, +10) to
select a preset number you want.
• For details on using the number buttons, see “How to use the
number buttons” (A pg. 22).
Example:
When the preset channel 1 is selected.
7 While listening to an AM station
Press FM MODE.
The current Beat Cut mode appears on the display window.
Each time you press the button, the Beat Cut mode changes.
• Choose “BEAT CUT 1” or “BEAT CUT 2” according to which
gives clearer sound.
1 1 0 3 . 5 0 M
If the setting is cancelled before you finish, start from step 2
again.
While the selected number is flashing:
4 Press MEMORY.
The selected number stops flashing.
The station is assigned to the selected preset number.
If the setting is cancelled before you finish, start from step 2
5 aRgaeinp.eat steps 1 to 4.
• Storing a new station to a used number erases the previously
stored one.
1 Press FM/AM repeatedly to select FM or
AM.
2 Press number button(s) (1-10, +10) to
select a preset number.
• For details on using the number buttons, see “How to use the
number buttons” (A pg. 22).
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AV COMPU LINK remote control system
The AV COMPU LINK remote
control system allows you to operate
Available functions
The AV COMPU LINK remote control system allows you to use
the functions listed following.
JVC TVs and VCRs through the center unit. This system is
equipped with the AV COMPU LINK-III, which adds a function to
operate JVC’s video components via the video components
terminals. To use this remote control system, you need to connect
the video components you want to operate as follows.
• Refer also to the manuals supplied with your TV and video
components.
One-touch video play
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy video playback without manually setting other
switches. This system automatically turns on and changes the
source to VCR.
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
When you insert a video cassette with its safety tab in place, press
the play (3) button on the VCR or on the remote control to get the
same result.
Connecting a TV and VCR
CAUTION
Before connecting;
• If you have already plugged your VCR, TV and the center unit into
the AC outlets, unplug their AC power cords first.
One-touch DVD play
Simply by starting playback on the built-in DVD player, you can
enjoy playback without manually setting other switches. The TV
automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
1 Connect the center unit to a TV and
VCR.
2 •CFoonr dneetacilst, tsheeepacgee n12taenrdu13n. it to a TV and VCR
using the optional AV COMPU LINK
cords.
Automatic selection of TV input mode
When you select DVD or VCR as the source to play on the system,
the TV automatically changes the input mode to the appropriate
position so that you can view the playback picture.
Automatic Power On/Off
The TV and VCR turn on and off along with the system.
When you turn on the system;
Center unit
• If the previously selected source is “DVD”, only the TV will turn
on automatically.
• If the previously selected source is “VCR”, the TV and VCR will
turn on automatically.
When you turn off the system, the TV and VCR will turn off.
NOTE
• If you turn off the system while recording on the VCR, the VCR will
not turn off and will continue recording.
AV COMPU LINK cord
(not supplied)
VCR
TV
3 Plug the AC power cords of the VCR, TV
and the center unit into the AC outlets.
4 Turn on the connected components
• When turning on the TV for the first time after the AV
COMPU LINK connection, turn the TV volume to
minimum using the TV volume control on the TV.
• When turning on the VCR, use the remote control supplied
with this system. (Press F VCR/DBS.)
NOTE
• To correctly use the automatic selection of TV input mode, select the
correct “M. OUT” setting. (A pg. 35)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
References
To clean the disc
Wipe the disc with a soft cloth in a straight line
from center to edge.
• DO NOT use any solvent — such as
conventional record cleaner, spray,
thinner or benzine — to clean the disc.
Maintenance
7 Handling Discs
• Remove the disc from its case by holding it at
the edge while pressing the center hole lightly.
• Do not touch the shiny surface of the disc or
bend the disc.
7 Cleaning the system
• Stains on the system should be wiped off with a soft cloth. If the
system is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean with a
dry cloth.
• Put the disc back in its case after use to
prevent warping.
• Be careful not to scratch the surface of the
disc when placing it back in its case.
• Avoid exposure to direct sunlight, temperature
extremes and moisture.
• Since the system may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
•
•
•
•
•
DO NOT wipe it with a hard cloth.
DO NOT wipe it strong.
DO NOT wipe it with thinner or benzine.
DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
Power does not come
on.
The power cord and/or system cord is not connected.
Connect the power cord and system cord correctly.
(A pg. 13)
The remote control does The batteries are exhausted.
not work.
Replace the batteries. (A pg. 7)
Sunlight is falling directly on the remote sensor.
Hide the remote sensor from direct sunlight.
No sound.
The system cord and/or speaker cord is not connected. Check the connection. (A pg. 12)
and/or DIGITAL IN (DBS) correctly.
An incorrect source has been selected.
The decode mode is not set correctly.
Select the correct source. (A pg. 17)
Select the proper decode mode. (A pg. 35)
Connect the cord correctly. (A pg. 12)
Use a playable disc. (A pg. 3)
No picture is displayed The video cord is not connected correctly.
on the TV screen.
The disc is not playable.
No picture is displayed The scan mode is set to “PAL PROG.” or “NTSC
Change the scan mode to “PAL” or “NTSC”.
on the TV screen, the
PROG.” though the center unit is connected to the TV (A pg. 18)
picture is blurred, or the which does not support the progressive video input
picture is divided into
two parts.
such as a conventional TV.
Video and audio are
distorted.
The disc is scratched or dirty.
Replace or clean the disc.
A VCR is connected between the center unit and the
TV.
Connect the center unit and TV directly. (A pg. 12)
The picture does not fit The monitor type is not set correctly.
the TV screen.
Set “MONITOR TYPE” properly. (A pg. 37)
Hard to listen to
broadcast because of
noise.
Antennas are disconnected.
Reconnect the antennas correctly and securely.
(A pg. 8)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
References
7 Subwoofer (SP-PWS8/SP-PWS5)
Amplifier section
Specifications
Front/Center/Surround:
80 W per channel, RMS at 6 C
(Center/Surround)/120 W per channel,
RMS at 4 C (Front)
at 1 kHz, with 10 % total harmonic
distortion.
120 W, RMS at 4 C at 100 Hz, with
10 % total harmonic distortion.
7
Center unit (XV-THS8/XV-THS5)
Audio section
Total Harmonic Distortion 0.02 %
NOTE: This value is measured at System cord CONNECTOR for
Subwoofer:
reference.
Digital input*1:
DIGITAL IN (DBS): –21 dBm to –15 dBm
Speaker section
Speaker unit:
(OPTICAL)
(660 nm E30 nm)
16 cm Bass-reflex, Magnetically
Shielded
30 Hz to 200 Hz
1
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
Frequency Range:
Video section
General
Power Requirements:
Video System:
NTSC/PAL selectable
500 lines
64 dB
AC 110 V/127 V/220 – 240 V
selectable with the voltage selector,
50 Hz/60 Hz
Horizontal Resolution:
Signal-to-Noise Ratio:
Video output level
Composite:
(except for Hong Kong and Australia)
1.0 V(p-p)/75 C
AC 220 V
(for Hong Kong only)
AC 240 V , 50 Hz
, 50 Hz
S-video-Y:
S-video-C:
Component-Y:
Component-PB/PR:
1.0 V(p-p)/75 C
0.286 V (0.3 V*2) (p-p)/75 C
1.0 V(p-p)/75 C
(for Australia only)
110 W (at operation)
0 W (in standby mode)
0.7 V(p-p)/75 C
Power Consumption:
Dimensions (W M H M D):
Mass:
Video input sensitivity/Impedance (VCR IN)
Composite:
S-video-Y:
S-video-C:
1.0 V(p-p)/75 C
1.0 V(p-p)/75 C
0.286 V (0.3 V*2) (p-p)/75 C
170 mm M 412 mm M 444 mm
12.0 kg
2
* For PAL system
Tuner section
Tuning Range
FM:
7 Satellite Speakers
Front speakers (SP-THS9F)
Speakers: 5.5 cm M 2,
87.50 MHz to 108.00 MHz
531 kHz to 1 602 kHz
(at 9 kHz intervals)
AM:
3.0 cm
Bass-reflex, Magnetically Shielded
Power Handling Capacity: 120 W
530 kHz to 1 600 kHz
(at 10 kHz intervals)
Impedance:
Frequency Range:
Dimensions (W M H M D):
4 C
General
Power Requirements:
95 Hz to 40 kHz
AC 110 – 240 V
(except for Hong Kong and Australia)
AC 220 V , 50 Hz
(for Hong Kong only)
AC 240 V , 50 Hz
(for Australia only)
18 W (at operation)
2.0 W (in standby mode)
, 50/60 Hz
250 mm M 1 103 mm M 250 mm
3.67 kg
Mass:
Surround speakers (SP-THS9S)
Speakers:
5.5 cm M 2
Bass-reflex, Magnetically Shielded
Power Consumption:
Dimensions (W M H M D):
Mass:
Power Handling Capacity: 80 W
Impedance:
Frequency Range:
Dimensions (W M H M D):
6 C
435 mm M 57 mm M 319 mm
3.0 kg
90 Hz to 30 kHz
250 mm M 1 103 mm M 250 mm
Mass:
3.77 kg
Center speaker (SP-THS9C)
Speakers: 5.5 cm M 2,
3.0 cm
Bass-reflex, Magnetically Shielded
Power Handling Capacity: 80 W
Impedance:
6 C
Frequency Range:
90 Hz to 40 kHz
Dimensions (W M H M D):
209 mm M 85 mm M 92 mm
Mass:
0.87 kg
43
Download from Www.Somanuals.com. All Manuals Search And Download.
References
7 Satellite Speakers
Front speakers (SP-THS5F)
Speakers:
Woofer:
Tweeter:
8.0 cm
1.5 cm
Bass-reflex, Magnetically Shielded
Power Handling Capacity: 120 W
Impedance:
4 C
Frequency Range:
90 Hz to 20 kHz
Dimensions (W M H M D):
106 mm M 139.5 mm M 102 mm
Mass:
0.67 kg
Surround speakers (SP-THS7S)
Speakers:
8.0 cm
Bass-reflex, Magnetically Shielded
Power Handling Capacity: 80 W
Impedance:
6 C
Frequency Range:
80 Hz to 20 kHz
Dimensions (W M H M D):
111.5 mm M 139 mm M 106.5 mm
Mass:
0.52 kg
Center speaker (SP-THS5C)
Speakers:
Woofer:
Tweeter:
8.0 cm
1.5 cm
Bass-reflex, Magnetically Shielded
Power Handling Capacity: 80 W
Impedance:
6 C
Frequency Range:
90 Hz to 20 kHz
Dimensions (W M H M D):
137.5 mm M 105 mm M 108 mm
Mass:
0.67 kg
Designs & specifications are subject to change without notice.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Hong Kong
and Australia)
SP-PWS8
SP-PWS5
CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) line voltage
corresponds with the position of the voltage selector switch provided on the
outside of this equipment and, if different, reset the voltage selector switch,
to prevent from a damage or risk of fire/electric shock.
EN
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
0404SKMIDEJEM
|