JVC Home Theater System GVT0154 001A User Manual

DVD DIGITAL CINEMA SYSTEM

TH-S77

Consists of XV-THS77, SP-PWS77,

SP-THS77F, SP-THS77C and

SP-THS77S

INSTRUCTIONS

GVT0154-001A

[US/UN/UG/UX]

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings, Cautions and Others

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are

shown below:

Wall or obstructions

XV-THS77

Wall or

obstructions

8 cm

XV-THS77

Front

3 cm

10 cm

MIC LEVEL

MIN

MAX

MIC

PHONES

obstructions

15 cm

Wall or obstructions

SP-PWS77

Wall or

obstructions

20 cm

SP-PWS77

Front

15 cm

obstructions

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

Introduction .....................................2

Notes on handling .................................................................2

Supplied accessories ............................................................2

Playback ........................................18

Basic playback ....................................................................18

One touch replay .................................................................20

Fast-forward/fast-reverse search ........................................20

Skip to the beginning of a desired selection .......................20

Locating a desired title/group using number buttons .........21

Playing back a bonus group ................................................21

Selecting the desired title/playlist from the control display .21

About discs .....................................3

Playable disc types ...............................................................3

Notes on file types ................................................................4

Description of parts and controls ...5

Advanced operations ....................22

Using the surround mode ...................................................22

Using the on-screen bar .....................................................23

Playing from a specified position on a disc .........................25

Using the file control display ..............................................26

Resume playback ................................................................27

Selecting a view angle .........................................................27

Selecting the subtitle ..........................................................27

Selecting the audio .............................................................28

Special picture playback .....................................................28

Program playback ...............................................................30

Random playback ...............................................................31

Repeat playback ..................................................................31

Tray lock .............................................................................32

Sound and other settings ....................................................33

Connections ....................................8

Connecting the FM and AM antennas ....................................8

Connecting the satellite (front, center, surround) speakers ..9

Speaker layout ....................................................................10

Connecting a TV ..................................................................10

Connecting the powered subwoofer ....................................11

Connecting to an analog component ...................................11

Connecting to a digital component .....................................11

Connecting the power cord .................................................11

Operating external components with

the remote control ........................12

Operating the TV .................................................................12

Operating the VCR ..............................................................13

Operating the DBS tuner or CATV converter .......................13

Setting DVD preferences ..............34

Using the setup menus .......................................................34

Menu description ................................................................34

Basic operations ...........................14

Turning the system on/off ...................................................14

Selecting the source to play ................................................15

Adjusting the volume [VOLUME] ........................................15

Listening with headphones (not supplied) ..........................15

Turning off the sound temporarily [MUTING] .....................15

Adjusting the brightness of the indications [DIMMER] .......15

Sleep Timer [SLEEP] ...........................................................16

Adjusting the output level of the subwoofer and speakers ..16

Adjusting the treble sound [TREBLE] ..................................16

Adjusting the bass sound [BASS] .......................................16

Changing the scan mode ....................................................16

Optimizing the speaker settings [Smart Surround Setup] ...17

Tuner operations ...........................37

Setting the AM tuner interval spacing .................................37

Manual tuning .....................................................................37

Preset tuning ......................................................................38

Selecting the FM reception mode ........................................38

Reducing the noise of AM broadcast ..................................38

KARAOKE operations ....................39

Basic KARAOKE operations ................................................39

Reserving songs .................................................................39

Selecting audio ...................................................................40

Adding an echo effect to your voice ....................................40

Shifting the pitch of the playback sound .............................40

References ....................................41

Maintenance .......................................................................41

Troubleshooting ..................................................................41

Specifications .....................................................................42

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

7 Safety precautions

Avoid moisture, water and dust

Notes on handling

7 Important cautions

Installation of the system

• Select a place which is level, dry and neither too hot nor too cold;

between 5°C and 35°C.

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near

a heating device.

When you are away

When away on travel or for other reasons for an extended period of

time, disconnect the power cord plugs from the wall outlet.

• Leave sufficient distance between the system and the TV.

• Do not use the system in a place subject to vibration.

Power cord

Do not block the vents

Blocking the vents may damage the system.

• Do not handle the power cord with wet hands!

• A small amount of power is always consumed while the power

cord is connected to the wall outlet (center unit only).

• When unplugging the power cord from the wall outlet, always

pull on the plug, not the power cord.

Care of the cabinet

When cleaning the system, use a soft cloth and follow the relevant

instructions on the use of chemically-coated cloths. Do not use

benzene, thinner or other organic solvents including disinfectants.

These may cause deformation or discoloring.

To prevent malfunctions of the system

• There are no user-serviceable parts inside. If anything goes

wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic object into the system.

• Do not use any non-standard shape disc (like a heart, flower or

credit card, etc.) available on the market, because it may damage

the system.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the

wall outlet, then call the store where you made your purchase.

Using the system in this condition may cause fire or electrical

shock.

• Do not use a disc with tape, stickers, or paste on it, because it

may damage the system.

Label sticker

Supplied accessories

Check to be sure you have all of the supplied accessories.

The number in parentheses is the quantity of the pieces supplied.

If anything is missing, contact your dealer immediately.

Sticker

Paste

• Remote control (1)

• Batteries (2)

• FM antenna (1)

Note about copyright laws

• AM loop antenna (1)

Check the copyright laws in your country before recording from the

discs. Recording of copyrighted material may infringe copyright

laws.

• Power cord (1)

• AC plug adapters (2) (Except for the countries of Middle East)

• System cord (1)

Note about copyguard system

• Composite video cord (1)

The discs are protected by copyguard system. When you connect

the system to your VCR directly, the copyguard system activates

and the picture may not be played back correctly.

• Speaker cords

For satellite (front left/right) and center speakers (3)

For satellite speakers (surround left/right) (2)

• Screws

M4 x 40 mm:

For satellite speakers (12)

• Base plates

For satellite speakers (front and surround) (4)

Download from Www.Somanuals.com. All Manuals Search And Download.

About discs

Notes on DVD-R, DVD-RW and DVD-RAM

• This system can also play finalized DVD-Rs or DVD-RWs

recorded in DVD VIDEO format and DVD-RWs or DVD-RAMs

recorded in DVD VR format.

Playable disc types

This system has been designed to play back the following discs:

• This system can also play DVD-Rs or DVD-RWs if MP3, WMA,

JPEG and MPEG-4 files are recorded on them with UDF Bridge

format.

DVD VIDEO

DVD AUDIO

This system does not support “multi-border” discs.

Notes on CD-R and CD-RW

VCD/SVCD

Audio CD

• This system can also play CD-Rs or CD-RWs if MP3, WMA,

JPEG and MPEG-4 files are recorded on them with ISO 9660

format.

• This system supports “multi-session” discs (up to 20 sessions).

• This system cannot play “packet write” discs.

Some discs may not be played back because of their disc

characteristics, recording conditions, or damage or stain on them.

• DVD Logo is a trademark of DVD Format/Logo Licensing

Corporation.

• The Non-DVD side of a “DualDisc” does not comply with the

“Compact Disc Digital Audio” standard. Therefore, the use of

Non-DVD side of a DualDisc on this product may not be

recommended.

Unplayable discs:

SACD, CD-I (CD-I Ready), Photo CD, etc.

Playing back these discs will generate noise and damage the

speakers.

•

This system accommodates the NTSC and PAL system. When

you play an NTSC disc with the scan mode set to “PAL”

(A pg. 16), the NTSC video signal is converted to the PAL60

signal and output.

• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs, their

actual operation may be different from what is explained in this

manual. This is due to the disc programming and disc structure,

not a malfunction of this system.

• Before playing back discs, read their instructions or cautions

carefully.

Region code of DVD VIDEO

This system can play back DVD VIDEO discs whose Region Code

numbers include the system’s Region Code, which is indicated on

the rear panel.

For the countries of Middle East

For the countries of Southeast Asia

If a DVD with an improper Region Code number is loaded,

“REGION CODE ERROR!” appears on the TV screen and

playback cannot start.

Download from Www.Somanuals.com. All Manuals Search And Download.

About discs

For JPEG files

• We recommend to record a file at 640 x 480 resolution.

• This system can only play baseline JPEG files.

Notes on file types

For all playable files

For MPEG-4 files

• The system supports the types of the advanced simple profile as

MPEG-4 files (MPEG-4 ASF).

• The system supports MPEG-4 files followed the condition

below:

File format:

Visual profile:

Audio CODEC:

Max. picture size: 352 x 288 (CIF)

Max. bit rate: 384 kbps

• The system can only recognize and play files with one of the

following extensions, which can be in any combination of upper

and lower case;

MP3:

“.MP3”, “.mp3”

WMA: “.WMA” , “.wma”

ASF

JPEG:

“.JPG”, “.JPEG”, “.jpg”, “.jpeg”

MPEG-4 SP (Simple Profile)

G.726

MPEG-4: “.ASF”, “.asf”

• The system recognizes up to 150 tracks (files) per group, 99

groups per disc, and the total number of the tracks (files) that the

system can play is 4000.

• Some files may not be played back normally because of their disc

characteristics or recording conditions.

For MP3/WMA files

• The system supports MP3/WMA files recorded with a bit rate of

32 – 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,

24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.

• If the tag information (album name, artist, and track title, etc.) is

recorded on a disc, it appears in the file control display on the TV

screen. (A pg. 26)

• We recommend to record each piece of material (song) at a

sample rate of 44.1 kHz and at a data transfer rate of

128 (96*) kbps.

* For WMA only

This product incorporates copyright protection technology

that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology

must be authorized by Macrovision, and is intended for

home and other limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or

disassembly is prohibited.

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES

WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,

EXCEPT FOR USE BY A CONSUMER ENGAGING IN

PERSONAL AND NON-COMMERCIAL ACTIVITIES.

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS

RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.

IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Front panel (center unit)

Display window

pg. 37

pg. 38

pg. 23

pg. 19

pg. 23

FM AM

P LPCM SURR

MHz

kHz

WMAMP3

RESUME

PROGRESSIVE B.S.P. CHAP. TRK PG PL BONUS ST MONO RDS TA NEWS INFO PRG RND

pg. 31

pg. 30

pg. 20

pg. 19

pg. 37

pg. 38

pg. 27

pg. 19

pg. 31

pg. 39

pg. 16

pg. 29

pg. 21

pg. 15

pg. 18 pg. 18

pg. 18

pg. 14

pg. 15

Disc tray (inside): pg. 18

MIC LEVEL

MIN

MAX

MIC 1

MIC 2

PHONES

pg. 14

pg. 39

Remote sensor: pg. 7

pg. 15

Rear panel (center unit)

pg. 11

pg. 10

pg. 11

pg. 10

pg. 11

pg. 8

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Powered subwoofer

pg. 11

pg. 9

Do not block the

ventilation openings.

FROM

XV-THC3

XV-THS55

XV-THS58

XV-THS66

Ω

16Ω

See below.

POWER ON lamp:

pg. 14

Power cord:

pg. 11

Rear

Front

NOTE

• For safety reasons, always ensure that there is sufficient space behind

the powered subwoofer.

Setting the VOLTAGE SELECTOR

Before plugging, set the correct voltage for your area with the voltage selector switch on the rear panel of the powered subwoofer.

Voltage selector switch

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Remote control

Putting batteries in the remote control

OPEN/CLOSE

AUDIO

VCR/DBS

DBS

pg. 14

pg. 12

pg. 13

pg. 18

pg. 12

TV/VIDEO MUTING

pg. 15

DVD

FM/AM

VCR

R6P (SUM-3)/AA (15F)

type dry-cell batteries

(supplied)

pg. 15

pg. 19

pg. 23

pg. 28

pg. 27

AUDIO SUBTITLE SURROUND FL DISP.

TV VOL

CHANNEL AUDIO VOL

pg. 15

AUDIO

pg. 12-40

pg. 12

VCR/DBS

TUNING

pg. 18

pg. 20, 37

TUNING

SLOW

MEMORY

FM MODE

SLOW

pg. 20, 28

pg. 18, 38

pg. 25

TOP MENU/PG

MENU/PL

pg. 25

pg. 18,

If the range or effectiveness of the remote control decreases,

replace both batteries.

pg. 16, 34,

ENTER

CAUTION

• Do not expose batteries to heat or flame.

SCREEN

REC

pg. 13,

pg. 23

TITLE/GROUP

ANGLE

ZOOM

Operating the system from the remote

control

Aim the remote control directly to the front panel of the center unit.

• Do not hide the remote sensor.

pg. 21

pg. 27

Number

buttons:

pg. 20

pg. 29

pg. 31

pg. 32

pg. 34

pg. 33

PAGE

100+

TV RETURN

REPEAT A-B RPT PLAY MODE CANCEL

pg. 30

pg. 30, 31

pg. 16, 29

pg. 25

SET UP SETTING RETURN SCAN MODE

VFP

MIC ON/OFF VOCAL

ECHO

RESERVE

pg. 39

DIMMER

SLEEP

KEYCON.

pg. 15

pg. 17

pg. 16

SMART

S.SETUP

BASS

TREBLE

LEVEL

pg. 16

FRONT L CENTER FRONT R

S.WFR

SURR. L

SURR. R

NOTE

• To use the buttons

under the cover, slide

down the cover.

TITLE/GROUP

ANGLE

ZOOM

PAGE

TV RETURN

100+

REPEAT A-B RPT PLAY MODE CANCEL

SETUP SETTING SCAN MODE RETURN

VFP

TREBLE

SMART

SLEEP DIMMER S.SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Do not connect the power cord until all other connections have been made.

If reception is poor

Connecting the FM and

AM antennas

Center unit

AM loop antenna

7 AM loop antenna

Setting up supplied AM loop antenna

Outdoor single vinyl-covered wire antenna

(not supplied)

If the antenna cord is covered with the insulation

coat, twist and pull the insulation coat off and

remove.

7 FM antenna

FM antenna (supplied)

Center unit

Extend the supplied FM antenna

horizontally.

Connecting AM loop antenna

Center unit

If reception is poor

Center unit

Outdoor FM antenna

(not supplied)

Standard type (75 C

Outdoor FM antenna cord

coaxial) connector

(not supplied)

Antenna cord

NOTE

• We recommend that you use coaxial cable for the FM antenna as it is

well-shielded against interference.

• Turn the loop antenna until you have the best reception during

AM broadcast program reception.

NOTE

• Make sure the antenna conductors do not touch any other terminals,

connecting cords and power cords. This could cause poor reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Connecting the satellite (front, center, surround)

speakers

Before connecting the

speaker cords;

Twist and pull the insulation coat

off and remove.

Front speakers

SP-THS77F

Powered subwoofer

SP-PWS77

Speaker cord (supplied)

• Connect the black cords to the black (r) terminals.

• Connect the white cords to the (q) terminals referring to the table

below:

FRONT SPEAKERS (LEFT)

FRONT SPEAKERS (RIGHT)

CENTER SPEAKER

White

Red

Green

Blue

SURROUND SPEAKERS (LEFT)

SURROUND SPEAKERS (RIGHT)

Gray

Center speaker

SP-THS77C

Surround speakers

SP-THS77S

Ω

16Ω

4 m

Black

White

Red

4 m

Speaker (rear side)

Black

Screw M4 x

40 mm

(supplied)

10 m

Base plate

Precautions for daily use

CAUTION

• When moving the speakers, do not pull the speaker cords;

otherwise, the speakers may fall over, causing damage or injury.

• When holding a speaker, always grasp the lower portion.

• Do not lean against the speakers, as the speakers could fall down

or break, possibly causing an injury. Especially be careful that

children do not lean against them.

• When you connect speakers other than the supplied ones, use

speakers of the same speaker impedance (SPEAKER IMPEDANCE)

indicated near the speaker terminals on the rear of the powered

subwoofer.

• DO NOT connect more than one speaker to one speaker terminal.

• Do not reproduce sounds at so high a volume that they are

distorted; otherwise, the speakers may be damaged by internal

heat buildup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Speaker layout

Connecting a TV

• You can get better picture quality in the order — Component

video > S-video > Composite video.

• Distortion of picture may occur when connecting to the TV via a

VCR, or to a TV with a built-in VCR.

Center speaker

Front left

speaker

Front right

speaker

• You need to set “MONITOR TYPE” in the PICTURE menu

correctly according to the aspect ratio of your TV. (A pg. 35)

Powered

subwoofer

7 To connect a TV equipped with the component video

input jacks

Center unit

COMPONENT VIDEO OUT

To component

video input

Surround left

speaker

Surround right

speaker

Component video cord (not supplied)

• Place the satellite speakers on a flat and level surface.

• The front and center speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, they may

cause color distortions. So, pay attention to the following when

installing the speakers.

– When placing the speakers near a TV set, turn off the TV’s main

power switch or unplug it before installing the speakers. Then wait

at least 30 minutes before turning on the TV’s main power switch

again.

NOTE

• If your TV supports progressive video input, you can enjoy a high

quality picture by setting the progressive scan mode to active.

(A pg. 16)

• If the component video input jacks of your TV are of the BNC type,

use a plug adapter (not supplied) to convert the pin plugs to BNC

plugs.

Some TVs may still be affected even though you have followed the

above. If this happens, move the speakers away from the TV.

• The surround speakers are not magnetically shielded.

If it is located nearby the TV or monitor, it will probably cause

color distortion on the screen. To avoid this, do not place the

speaker nearby the TV or monitor.

• The component video signals can be output only when you select

“DVD” as the source to play. (A pg. 15)

7 To connect a TV equipped with the composite or S-

video jacks

• Be sure to place the powered subwoofer to the TV’s right. If you place

the powered subwoofer to the TV’s left, keep sufficient distance

between them to prevent the TV screen from appearing mottled.

Center unit

Composite video cord

(supplied)

S-video cord

(not supplied)

Align the 5marks.

To S-video input

To composite

video input

NOTE

• Select the appropriate scan mode according to your TV. See

“Changing the scan mode” (A pg. 16).

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Connecting the powered

subwoofer

Connecting to a digital

component

You can enjoy the sound of a digital component.

Powered

subwoofer

Center unit

System cord

(supplied)

DBS* tuner

MD player

FROM

XV-THC3

XV-THS55

XV-THS58

XV-THS66

Align the 5marks.

To digital optical

output

Digital optical cord

(not supplied)

Connecting to an analog

component

* DBS = Direct Broadcasting Satellite

You can enjoy the sound of an analog component.

NOTE

When playing a video component such as a DBS tuner;

• To listen to the sound, select “DBS D” as the source to play.

(A pg. 15)

Center unit

• To see the picture, connect the video output jack of the component to

the video input jack of the TV directly, and select the correct input

mode on the TV.

S-video cord

(not supplied)

Connecting the power

cord

RCA pin plug

cord

(not supplied)

Composite

video cord

(not supplied)

Make sure that all other connections have been completed.

Center unit

Powered

subwoofer

AC IN

VCR (1 3 or 2 3)

TV (3)

Cassette recorder (3)

1 To composite video output

2 To S-video output

3 To audio output

Power cord

(Supplied)

Power cord

NOTE

• The signals input to the VIDEO jack of the VCR IN jacks will be

output only from the VIDEO jack of the VIDEO OUT jacks, not from

the S-VIDEO jack of the VIDEO OUT jacks.

Plug into AC outlets.

• If you connect a sound-enhancing device such as a graphic equalizer

between the source components and this system, the sound output

through this system may be distorted.

CAUTION

• Disconnect the power cord before cleaning or moving the system.

• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp and pull the plug so as not to damage the cord.

• (Except for the countries of Middle East) If the AC outlets do not match

the AC plugs, use the supplied AC plug adapters.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating external components with the remote control

4 Press number buttons (1-9, 0) to enter

The buttons described below are used on pages 12 and

13.

the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 1, then 0.

For a Toshiba TV:

Press 0, then 8.

TV/VIDEO

VCR/DBS

DBS

Manufacturer

JVC

Code

Manufacturer

Samsung

Sharp

Code

VCR/DBS

DBS

VCR

Hitachi

VCR

Magnavox

Mitsubishi

Panasonic

RCA

Sony

Toshiba

Zenith

VCR/DBS

Remote control

mode selector

04, 11

(play button)

5 Release

TV.

If there is more than one code listed for corresponding brand,

try each one until you enter the correct one.

ENTER

7 Operation

REC

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

Number

buttons

The following buttons are available:

100+

TV RETURN

TV:

TV VOL +/–:

TV/VIDEO:

Turns TV on and off.

Adjusts the volume.

Selects the input mode (either TV or

VIDEO).

CHANNEL +/–:

Changes the channels.

1-10, 0, +10 (100+): Selects the channel.

TV RETURN: Alternates between the previously selected

channel and the current channel.

NOTE

• Manufacturers’ codes are subject to change without notice.

• Set the codes again after replacing the batteries of the remote control.

Operating the TV

7 To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector

to TV.

2 Press and hold

TV.

3 P^Ker^ee^ps^ths^{e b}E^utN^tonT^pE^reR^ss.^{ed until step 4 is finished.}

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 12 for button locations.

Operating external components with the remote control

Operating the VCR

7 To set the manufacturer’s code

You can operate a JVC VCR without setting the manufacturer’s

code.

Operating the DBS tuner

or CATV converter

7 To set the manufacturer’s code

1 Slide the remote control mode selector

to VCR/DBS.

2 Press DBS.

2 Press VCR.

3 Press and hold

VCR/DBS.

3 Press and hold

VCR/DBS.

4 P^Ker^ee^ps^ths^{e b}E^utN^tonT^pE^reR^ss.^{ed until step 5 is finished.}

5 Press number buttons (1-9, 0) to enter

the manufacturer’s code (2 digits).

Examples:

For a GI Jerrold product:

Press 0, then 1.

For a Sony product:

Press 2, then 0.

Examples:

For a Panasonic VCR:

Press 0, then 7.

For a NEC VCR:

Press 2, then 5.

Manufacturer Code

Manufacturer

Echostar

GI Jerrold

Hamlin

Code

JVC

01, 02, 03

Philips

RCA

Emerson

Fisher

11, 26

05, 06

01, 02, 03, 04, 05, 06, 07, 08

Samsung

15, 16, 17, 18

13, 14

Funai

10, 14, 15, 16 Sanyo

21, 22, 23

27, 28

Pioneer

Gold Star

Hitachi

Mitsubishi

NEC

Sharp

RCA

Shintom

Sony

Scientific Atlanta

Sony

09, 10

18, 19, 20

Zenith

11, 12

Panasonic

07, 17

6 Release

VCR/DBS.

6 Release

VCR/DBS.

If there is more than one code listed for your brand, try each

one until you enter the correct one.

If there is more than one code listed for your brand, try each

one until you enter the correct one.

7 Operation

Aim the remote control at the DBS tuner or CATV converter.

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a

DBS tuner or CATV converter;

1 Set the remote control mode selector to

VCR/DBS.

Before using the remote control to operate a

VCR;

Set the remote control mode selector to

VCR/DBS.

2 Press DBS.

The following buttons are available:

VCR/DBS: Turns VCR on and off.

3 (play button): Starts playback.

The following buttons are available:

VCR/DBS:

Turns DBS tuner or CATV converter on and

off.

7 :

8 :

Stops operation.

CHANNEL +/–:

Changes the channels.

Pauses playback.

1-10, 0, +10 (100+): Selects the channel.

Fast forwards video tape.

Rewinds video tape.

Press this button together with 3 (play button) to

start recording or together with 8 to pause

recording.

NOTE

REC:

When operating a VCR or DBS tuner/CATV converter;

• The source setting of VCR or DBS D remains after you have changed

the remote control mode selector to AUDIO or TV. When operating

VCR or DBS tuner/CATV converter again, it is not necessary to press

VCR or DBS after setting the remote control mode selector.

CHANNEL +/–: Changes the TV channels on the VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

The buttons on the remote control are used to explain most of the

operations in this manual. You can use the buttons on the center

unit same as on the remote control for operations unless

otherwise noted.

Turning the system on/off

On the remote control:

Press

AUDIO.

IMPORTANT

Before using the remote control for the following

operation;

On the center unit:

Press

• Set the remote control mode selector to AUDIO.

When DVD is selected as the source (A pg. 15), the following

messages will appear on the TV screen.

The buttons described below are used on

pages 14 to 17.

AUDIO

MUTING

Source

selecting

buttons

DVD

FM/AM

VCR

DBS

• “OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

• “NOW READING”:

Appears when the system is reading the disc information.

• “REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO does not

match the code the system supports. The disc cannot be

played back.

AUDIO VOL

AUDIO

Remote control

mode selector

• “NO DISC”:

Appears when no disc is loaded.

• “CANNOT PLAY THIS DISC”:

Appears when unplayable disc is loaded.

Cursor

(3/2/Y/5)/

ENTER

NOTE

SCAN MODE

• The STANDBY lamp turns on when the power is turned off and turns

off when the power is turned on.

• The power supply to the subwoofer is linked to the center unit. The

POWER ON lamp on the subwoofer lights green when the power is

turned on.

• A small amount of the power is consumed even when the power is

turned off (center unit only). This is called standby mode and the

STANDBY lamp lights in this mode. Unplug the power cord from the

AC outlet to turn the power off completely.

SMART

S. SETUP BASS TREBLE

SLEEP

BASS/

LEVEL

FRONT L CENTER FRONT R

LEVEL

S.WFR

SURR. L

SURR. R

Speaker

buttons

• You can also turn on the system by pressing the following buttons;

•

OPEN/CLOSE on the remote control or 0on the center unit

One of the source selecting buttons on the remote control

•

• 3on the center unit. You can use the same buttons on the remote

control.

STANDBY

PHONES

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 14 for button locations.

Basic operations

Selecting the source to

play

Listening with headphones

(not supplied)

On the remote control:

CAUTION

Be sure to turn down the volume;

Press one of the source selecting buttons

(DVD, FM/AM, VCR or DBS).

• Before connecting or putting on headphones as high volume may

damage both the headphones and your hearing.

• Before disconnecting headphones as high volume may be suddenly

output from the speakers.

DVD:

To play back a disc (DVD VIDEO, VCD etc.).

(A pg. 18)

FM/AM:

To tune in an FM or AM station. (A pg. 37)

Each time you press the button, the band alternates

between FM and AM.

While connecting a pair of headphones to the PHONES jack on the

center unit, the system automatically cancels the surround mode

(A pg. 22) currently selected, deactivates the speakers, turns the

subwoofer’s power off, and activates the headphone mode. “H.

PHONE” appears on the display window.

VCR:

DBS:

To select the source from a component connected to

the VCR IN jacks and AUDIO IN (VCR) jacks.

(A pg. 11)

To select the source from a component connected to

the DIGITAL IN (DBS) jack. (A pg. 11)

Headphone mode

When using the headphones, the following signals are output

regardless of your speaker setting;

• For 2 channel sources, the front left and right channel signals are

output from the headphones.

• Multi-channel signals are down-mixed and output from the

headphones.

• (For DVD AUDIO) When the disc prohibits down-mixing, only

the front left and right channels are output from the headphones.

In this case, “LR ONLY” appears on the display window for a

few seconds.

On the center unit:

Press SOURCE repeatedly until the source

name you want appears on the display

window.

NOTE

• When AM, FM or DBS D is selected as the source, this system does

not output video signals.

• It may take time to change the source.

Turning off the sound

temporarily [MUTING]

Adjusting the volume

[VOLUME]

Press MUTING.

CAUTION

To restore the sound

Perform one on the following:

• Press MUTING again.

• Press AUDIO VOL +/– (or press VOLUME +/– on the center

unit).

• Always set the volume to minimum level before starting any source.

If the volume is set at its high level, the sudden blast of sound could

permanently damage your hearing and/or blow out the speakers.

On the remote control:

Press AUDIO VOL +/–.

Adjusting the brightness

of the indications

[DIMMER]

On the center unit:

Press VOLUME +/–.

Press DIMMER.

Each time you press the button, the brightness level changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 14 for button locations.

Basic operations

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of

time has passed.

Adjusting the bass sound

[BASS]

Press BASS and then LEVEL +/–.

Press SLEEP.

Each time you press the button, the shut-off time changes.

Example:

NOTE

• The adjustments take effect for all sources.

minutes

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

S L E E P

6 0

NOTE

To check the remaining time

• To use the system in PROGRESSIVE mode, it is required that the

center unit is connected to the TV by using a component video cord

(not supplied). (A pg. 10)

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

7While DVD is selected as the source and stopped

To cancel

1 Press and hold SCAN MODE for

Press SLEEP repeatedly until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

2 seconds.

“NTSC”, “PAL” or “NTSC PRG”, “PAL PRG” appears on the

2 ^dP^isr^pe^las^ys^wiC^ndu^owrs^.or 3/2to select the desired

Adjusting the output level

of the subwoofer and

speakers

Press each speaker button you want to

adjust the output level and then LEVEL +/–.

mode.

• NTSC:

Select when your TV supports the NTSC

interlaced video input only.

• NTSC PRG:

Select when your TV equipped with

component jacks supports the NTSC

progressive video input.

• FRONT L:

• FRONT R:

• SURR. L:

• SURR. R:

• CENTER:

• S.WFR:

Front Left speaker

Front Right speaker

Surround Left speaker

Surround Right speaker

Center speaker

• PAL:

Select when your TV supports the PAL

interlaced video input only.

• PAL PRG:

Select when your TV equipped with

component jacks supports the PAL

progressive video input.

Subwoofer

You can get better picture quality in NTSC PRG, PAL PRG

3 ^mP^or^de^es^ths^anEⁱⁿN^NT^TE^SCR^{, P}w^ALh^mil^oe^det^.he selected mode

NOTE

• You can also make adjustments by using the setup menu shown on the

TV screen. (A pg. 36)

• The adjustments take effect for all sources.

• You cannot make this adjustment when FM or AM is selected as the

source and “SURR OFF” is selected as the surround mode.

is displayed.

When “NTSC PRG” or “PAL PRG” is selected, the

PROGRESSIVE indicator lights on the display window.

NOTE

• Although the picture may be distorted when you press ENTER, this

is not a malfunction of the system.

Adjusting the treble

sound [TREBLE]

• There are some progressive TVs and High-Definition TVs that are

not fully compatible with this system, resulting in an unnatural

picture when playing back a DVD VIDEO in the progressive scan

mode. In such a case, change the scan mode to “NTSC” or “PAL”.

To check the compatibility of your TV, contact your local JVC

customer service center.

Press TREBLE and then LEVEL +/–.

NOTE

• The adjustments take effect for all sources.

• All JVC progressive TVs and High-Definition TVs are fully

compatible with this system.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 14 for button locations.

Basic operations

When “FAILED !” appears on the TV screen

The system could not detect the clapping sound correctly. In such a

case, follow the instructions that appear on the TV screen.

• When the system detects the clapping sound as “FAILED !” three

times, set the delay time (DELAY) and the output level (LEVEL)

manually. (A pg. 36)

Optimizing the speaker

settings [Smart Surround

Setup]

NOTE

To cancel

• When you change the positioning of the speakers or listener, or

replace the supplied speakers with other ones, perform Smart

Surround Setup again.

Press SMART S. SETUP.

NOTE

• You need to set the subwoofer’s output level (LEVEL) manually.

(A pg. 16)

7While DVD is selected as the source and stopped

• In step 2, “SW ERROR” appears on the display window if the center

unit and the powered subwoofer are not connected correctly by using

the supplied system cord.

1 Take your position where you listen to

the sound.

2 Press and hold SMART S. SETUP.

3 ^“C^Sl^Ea^Tp^TINy^Go^”u^ar^pph^eaa^rsn^odⁿs^theo^dv^ise^plr^ayy^woⁱⁿu^dr^owh^.ead once.

4 Make sure that “COMPLETED !”

appears on the TV screen, then press

SMART S. SETUP.

The system detects your clapping sound through the satellite

speakers, then automatically makes the best settings for each

speaker. “COMPLETED !” appears on the TV screen when

Smart Surround Setup completes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

DVD

VIDEO

• The icon such as

shows the disc formats or file types the

Basic playback

operation is available for.

IMPORTANT

DVD DVD DVD

VIDEO AUDIO VR

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press DVD.

1 Press OPEN/CLOSE.

• The system turns on and the disc tray

comes out.

2 P^•l⁰ac^oe^{n th}a^ed^ceiⁿs^tec^r.^{unit can also be used.}

The buttons described below are used on pages 18 to 21.

Label side up

When placing an 8 cm

disc

OPEN/CLOSE

DVD

FL DISP.

3 Press 3(play button).

For MP3/WMA files

AUDIO

(play button)

Remote

control mode

selector

The file control display (A pg. 26) appears on the TV screen.

For JPEG files

Each file (still pictures) is shown on the TV screen for about 3

seconds (slide-show). When stopping playback, the file control

display (A pg. 26) appears on the TV screen.

TOP MENU/PG

MENU/PL

TOP MENU/PG

For MPEG-4 files

Pressing TOP MENU/PG or MENU/PL shows the file control

display (A pg. 26) on the TV screen during playback.

ENTER

For DVD VR disc

Pressing TOP MENU/PG or MENU/PL shows the control display

on the TV screen. (A pg. 21)

TITLE/GROUP

Number

buttons

7 To pause playback

100+

Press 8.

To return to playback, press 3(play button).

7 To stop

Press 7.

7 On-screen guide icons

During DVD VIDEO playback, the following guide icons may

appear for a while on the TV screen;

•

: appears at the beginning of a scene containing multi-

subtitle languages.

: appears at the beginning of a scene containing multi-audio

languages.

: appears at the beginning of a scene containing multi-angle

views.

(Play),

(Pause),

(Fast forward/

fast-reverse),

(Slow-motion forward/

reverse): appears when you perform each operation.

•

: the disc cannot accept an operation you have tried to do.

Continued on next page

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 18 for button locations.

Playback

MP3/WMA file

Example:

When an MP3 is played back

NOTE

• (For JPEG) The system cannot accept operations even though you

press any buttons before the entire picture appears on the TV screen.

• If you do not want the on-screen guide icons to appear, see page 36.

Signal and speaker

indicators

Track number

7 Playback information on the display window

DVD VIDEO

Example:

1 2 3

1 2 3 4

MP3

When a DVD VIDEO encoded with Dolby Digital 5.1ch is played

MP3 indicator*¹

Elapsed playing time (minute:second)

(during playback only)

Elapsed playing time

(hour:minute:second)

Chapter number

Pressing FL DISP.

Group number

SURR

1: 2 3: 3 1

2 4

Signal and speaker indicators (A pg. 23)

Surround mode and digital signal format (A pg. 23)

G 1 2

T 1

MP3

Track number

WMA indicator lights for WMA disc.

Pressing FL DISP.

Title number

Chapter number

JPEG file

C 2 4

1 5

SURR

File number

1 2 3

J P E

DVD AUDIO

Signal and speaker indicators

Pressing FL DISP.

1 2 3

P LPCM SURR

File number

Group number

Track number

Elapsed playing time

(hour:minute:second)

G 1 2

F 1 2 3

Pressing FL DISP.

MPEG-4 file

Group number

Track number

P LPCM SURR

T 1

2 3

: 3

1 0

VCD/SVCD/CD

Example:

When a CD is played back

Elapsed playing time (minute:second)

(during playback only)

Signal and speaker

indicators

Pressing FL DISP.

Track number

Group number

Track number

LPCM

1 2

3: 3 1

G 1 2

Elapsed playing time (minute:second)

Signal and speaker indicators

NOTE

• When a VCD or SVCD with PBC function is played, the elapsed

playing time does not appear, but “PBC” appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 18 for button locations.

Playback

DVD VR disc

Example:

Fast-forward/fast-reverse

During playback on the Original program*

Elapsed playing time

(hour:minute:second)

Title number

DVD DVD DVD

VIDEO AUDIO VR

7During playback

On the remote control:

Press y or 1.

Each time you press the button, the search speed

changes.

PG (Original program) indicator

Pressing FL DISP.

Title number

To return to normal speed playback

Press 3(play button).

Chapter number

Press and hold xor 4.

Continuously pressing xor 4increases the fast-forward/

reverse search speed.

NOTE

Example:

During playback on the Playlist*

• When a DVD VIDEO, DVD VR, VCD, SVCD or MPEG-4 is played

back, no sound comes out during fast-forward/reverse search.

• When a DVD AUDIO or CD is played back, sound is intermittent and

low during fast-forward/reverse search.

Elapsed playing time

(hour:minute:second)

Title number

• This feature may not work for some discs.

Skip to the beginning of a

desired selection

PL (Playlist) indicator

DVD DVD DVD

VIDEO AUDIO VR

Pressing FL DISP.

7 Using x/4buttons

Playlist number

Chapter number

7For DVD VIDEO/DVD VR (chapter): During

playback

For VCD/SVCD (track):

During playback without PBC function

For DVD AUDIO/CD/MP3/WMA/JPEG/MPEG-4 (track/file):

During playback or while stopped

* Pressing TOP MENU/PG or MENU/PL, you can change the

play mode. (A pg. 21)

Press xor 4repeatedly.

NOTE

• When playing back an MP3/JPEG file, you can make operations

using the file control display. (A pg. 26)

• This feature may not work for some discs.

• You can change the time information mode (except for MP3/WMA/

JPEG/MPEG-4). (A pg. 24)

• You can also check the playback information on the TV screen.

(A pg. 23)

7 Using number buttons on the remote control

7 Screen saver

7For DVD VIDEO/DVD VR (title, chapter):

While stopped, the title number is selected.

During playback, the chapter number is selected.

A TV screen may burn out if a static picture is displayed for a long

time. To prevent this, the system automatically dims the screen if a

static picture is displayed for over 5 minutes (the screen saver

function).

For DVD AUDIO (track):

During playback or while stopped

For VCD/SVCD (track):

During playback without PBC function

For CD/MP3/WMA/JPEG/MPEG-4 (track/file):

During playback or while stopped

• Pressing any button will cancel the screen saver function.

• If you do not want to use the screen saver function, see page 35.

Press number buttons (0-10, +10) to select

the desired number.

• For details on using the number buttons, see “How to use the

number buttons” below.

One touch replay

You can move back the playback position by 10 seconds

DVD DVD

VIDEO VR

from the current position.

7During playback

How to use the number buttons

On the remote control:

To select 3:

To select 14:

To select 24:

To select 40:

Press 3.

Press +10, then 4.

Press

Press +10 twice, then 4.

Press +10 three times, then 10.

Or press +10 four times, then 0.

NOTE

• This function works in the same title.

• This function is not available during the repeat playback.

• This feature may not work for some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 18 for button locations.

Playback

Locating a desired title/

group using number

buttons

Selecting the desired

title/playlist from the

control display

7During playback or while stopped.

7During playback or while stopped

1 Press TITLE/GROUP.

1 Press TOP MENU/PG or MENU/PL.

“_ _” or “_” is shown in the title/group display

area in the display window.

The control display is shown on the TV screen, and the system

starts playback of the first title/playlist.

Example:

During DVD VIDEO playback

• The PLAY LIST is shown only when the playlist is on the

DVD VR disc.

TOP MENU/PG: shows the ORIGINAL PROGRAM.

Example:

_ _

1 2 3 4 5

2 While the display window shows “_ _”

or “_”, use number buttons (0-10, +10)

to enter the desired title or group

number.

The system starts playback from the first chapter/track/file of

the selected title/group.

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 20).

NOTE

*1: Title number

*2: Recording date

• This feature may not work for some discs.

*3: Recording source (TV station, the input terminal of the

recording equipment etc.)

*4: Start time of recording

Playing back a bonus

group

*5: Title of the original program/playlist (The title may not be

displayed depending on the recording equipment.)

*6: Current title

Some DVD AUDIOs have a special group called “bonus

group” whose contents are not open to the public. The

bonus group is always assigned to the last group of a disc.

To play back a bonus group, you have to enter the specific “key

number” (a password). The way of getting the key number depends

on the disc. After getting the key number, you can play back the

bonus group by following the procedure below.

MENU/PL: shows the PLAY LIST.

Example:

7While the BONUS indicator lights up on the display window

1 Select the bonus group.

For selecting the group, see “Locating a desired title/group

using number buttons” described above.

The key number entry indication appears.

On the TV

*7: Playlist number

*8: Creating date of playlists

*9: Number of chapters

*10:Total playing time

*11:Current playlist

On the display window

_ _

K E Y

BONUS

2 Press Cursor Y/5to select the desired

title/playlist.

2 Press number buttons (0-9) to enter the

The system starts playback of the selected title/playlist.

key number, then press ENTER.

To clear the control display

• Press ENTER.

When you enter the correct key number, playback starts and

the BONUS indicator goes off.

• If you enter the wrong number, reenter the correct number.

About the play mode on a DVD VR disc

To clear the key number entry

Perform whichever one of the following:

• Open the disc tray.

• Original program (ORIGINAL PROGRAM):

The system can play back the original picture in the recorded

order.

• Turn off the system.

• Playlist (PLAY LIST):

The system can play back the playlist edited by the recording

equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

DVD

VIDEO

• The icon such as

shows the disc formats or file types the

Using the surround mode

operation is available for.

IMPORTANT

Before using the remote control for the following

operation;

• Set the remote control mode selector to AUDIO.

• There are exceptions in the operation mentioned

above. In such a case, follow each instruction.

7 Auto Surround (AUTO SUR)

Used to reproduce the sound as it is recorded without any

conversion (downmixing or simulation, etc.). For example, a

multichannel source is automatically reproduced in multichannel

audio.

7 Dolby Surround

Dolby Pro Logic II*

The buttons described below are used on pages 22 to 33.

Dolby Pro Logic II has a newly developed multichannel playback

format to decode all 2 channel sources — stereo source and Dolby

Surround encoded source — into a 5.1 channel.

Dolby Pro Logic II has two modes — Movie mode and Music

mode:

AUDIO SUBTITLE SURROUND

AUDIO

(play button)

Remote control

mode selector

• Pro Logic II Movie (MOVIE)

Suitable for reproduction of Dolby Surround encoded sources

SLOW

bearing the mark

SLOW

• Pro Logic II Music (MUSIC)

TOP MENU/PG

MENU/PL

Suitable for reproduction of any 2 channel stereo music sources.

/PL

/PG

Dolby Digital*

Cursor

(3/2/Y/5)/

ENTER

Used to reproduce multichannel soundtracks of the software

encoded with Dolby Digital (

SCREEN

7 DTS Digital Surround*

Used to reproduce multichannel soundtracks of the software

ANGLE

ZOOM

PAGE

Number

buttons

encoded with DTS Digital Surround (

DTS Digital Surround (DTS) is another discrete multichannel

digital audio format available on CD and DVD software.

100+

REPEAT A-B RPT PLAY MODE CANCEL

SETTING RETURN

VFP

Available Surround modes for each input signal

The B marks show available surround modes.

Surround

off

Auto

DTSDigital Linear Packed

Manufactured under

license from Dolby

Laboratories. “Dolby”,

“Pro Logic”, “MLP

Lossless”, and the

double-D symbol are

trademarks of Dolby

Laboratories.

Mode

Dolby Surround

DSP

Surround

PCM

DOLBY

ALL

Signal

SURR OFF AUTO SUR MOVIE*³MUSIC*³

DTS

LPCM

PPCM

ST*³

DOLBY D

—

(Multichannel)

DOLBY D

—

(2 channel)

DTS Digital

Surround

“DTS” and “DTS

Digital Surround” are

registered trademarks

of Digital Theater

Systems, Inc.

You can select these

modes by pressing

SURROUND.

—

(Multichannel)

DTS Digital

Surround

(2 channel)

—

Analog (VCR) or

Linear/Packed

PCM

—

(2 channel)

(A pg. 23)

Linear/Packed

PCM

(Multichannel)

—

Continued on next page

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

7 All Channel Stereo (DSP)

7 When playing back digital multichannel software

All Channel Stereo (ALL ST) mode can reproduce a larger stereo

sound field using all the connected (and activated) speakers.

All Channel Stereo can be used while reproducing 2 channel stereo

source.

(except during SURR OFF mode)

The appropriate multichannel surround mode (DOLBY D, DTS

Digital Surround or Linear/Packed PCM) is automatically selected.

Normal stereo sound

All Channel Stereo

7 When playing back 2 channel source

You can select either mode of Dolby Pro Logic II (MOVIE/

MUSIC) or the DSP (ALL ST) mode.

Press SURROUND repeatedly to select the

desired mode.

The surround mode is turned on and the current surround mode

appears on the display window.

Each time you press the button, the surround mode changes.

7 Indicators on the display window

Digital signal format indicators

For details on each mode, see page 22.

PPCM, SURR:

Lights when DVD AUDIO packed PCM signals

comes in.

To turn off the surround mode

Press SURROUND repeatedly until SURR

OFF appears on the display window.

LPCM, SURR:

GD, SURR:

C, SURR:

Lights when Linear PCM signal comes in.

Lights when DOLBY D signals come in.

Lights when DTS Digital (Surround) signals

come in.

No digital signal indicator lights when analog

signals come in.

Storing adjustments — auto memory

No indication:

When you turn the power off, the system memorizes the current

surround mode. The memorized mode is automatically recalled

when you turn the power on.

Dolby Surround/DSP mode indicators

GPLII, SURR: Lights when Dolby Pro Logic II mode is

activated.

NOTE

• When FM or AM is selected as the source, you can select All Channel

Stereo (ALL ST) and SURR OFF mode.

SURR:

Lights when All Channel Stereo mode is

activated.

• Note that the surround mode takes no effect on MPEG-4 playback.

• For a down-mixing prohibited DVD AUDIO disc, the system

continues to output multi-channel signals with “MULTI CH” shown

on the display window even if the surround mode is turned off during

playback. On the other hand, the system outputs only the front left and

right channel signals with “LR ONLY” shown on the display window

when you start playback with the surround mode having been set to

“STEREO” or “H. PHONE”.

Source signal indicators, etc.

Light to indicate the incoming signals.

a: Lights when the left channel signal comes

in.

b: Lights when the center channel signal comes in.

c: Lights when the right channel signal comes in.

d: Lights when the LFE channel signal comes in.

g: Lights when the surround left channel signal comes in.

i: Lights when the surround right channel signal comes in.

h: Lights when the monaural surround channel signal or 2

channel Dolby Surround signal comes in.

SW : Always lights.

Using the on-screen bar

You can check disc information and you can use some functions

using the on-screen bar.

The channel with “ ” shows that the corresponding speakers are

reproducing the channels’ sound.

If the channels’ sound decoded into 5.1 channel is reproduced, only

Showing the on-screen bar

“

” lights.

7Whenever a disc is loaded

DVD DVD DVD

VIDEO AUDIO VR

Selecting the surround mode

The system is set up to automatically select the optimal surround

mode for input signal from digital multichannel software.

When playing back 2 channel source, you can select the desired

surround mode manually.

Press ON SCREEN.

Each time you press the button, the on-screen bar

changes as follows on the TV screen.

Example:

During DVD VIDEO playback

IMPORTANT

Before using the remote control for the following

operation;

Dolby D

2/0 . 0ch

• Set the remote control mode selector to AUDIO.

Dolby D

2/0 . 0ch

OFF

(The on-screen bar disappears)

(back to the beginning)

• The currently selected item shows green.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

F Shows playback status.

appears during playback.

: appears during fast forward/reverse.

7 Contents of the on-screen bar during playback

DVD VIDEO

: appears during playback in forward slow-motion/

reverse slow-motion.

Dolby D

2/0 . 0ch

appears when paused.

appears when stopped.

G Select this to change time information (E). See “Changing the

time information” below.

DVD AUDIO

H Select this for Repeat Playback. (A pg. 31)

I Select this for time search function. (A pg. 26)

J Select this for chapter (for DVD VIDEO and DVD VR) or track

(for DVD AUDIO) search function. (A pg. 25)

K Select this to change audio language, channel, or stream.

(A pg. 28)

L Select this to change subtitle language and subpicture.

(A pg. 27)

M Select this to change view angle. (A pg. 27)

N Select this to change the page. (A pg. 29)

O Shows Playback Mode status.

Dolby D

2/0 . 0ch

VCD

SVCD

PROGRAM: appears during Program Playback. (A pg. 30)

RANDOM: appears during Random Playback. (A pg. 31)

P Shows Repeat Mode status. (A pg. 31)

Changing the time information

You can change the time information in the on-

DVD DVD DVD

VIDEO AUDIO VR

screen bar on the TV screen and the display

window of the center unit.

7During playback

1 Press ON SCREEN twice.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

MPEG-4*

3 Press ENTER repeatedly to select the

desired information.

* 7 – N are not available.

Example:

When elapsed playing time of disc is selected.

DVD VR disc

Dolby D

2/0 . 0ch

CHAP

TOTAL 0:00:34

DVD-VR

7VCD/SVCD/CD

• TIME: Elapsed playing time of current track

• REM:

Remaining time of current track

• TOTAL: Elapsed time of disc

• T. REM: Remaining time of disc

A Shows disc type.

B Shows audio information.

C Shows current title (for DVD VIDEO), group (for DVD

AUDIO) number or play mode (for DVD VR).

D Shows current chapter number (for DVD VIDEO and DVD VR)

or track number (for other type of discs).

E Shows time information. See “Changing the time information”.

7DVD VIDEO/DVD AUDIO/DVD VR

• TIME: Elapsed playing time of current chapter/track

• REM:

Remaining time of current chapter/track

• TOTAL: Elapsed time of Title/Group/Program

• T. REM: Remaining time of Title/Group/Program

4 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• When playing back DVD VR, “TIME” and “REM” cannot be shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

2 Press number buttons (1-10, +10) to

• For details on using the number buttons, see “How to use the

Playing from a specified

position on a disc

select the number of the desired item.

number buttons” (A pg. 20).

You can start playing a title, chapter or track you specify. You can

also play a disc from specified time.

To return to the menu

Press RETURN.

When “NEXT” or “PREVIOUS” is shown on the TV

screen:

Locating a desired scene from the DVD

• To go to the next page, press x.

• To return to the previous page, press 4.

DVD VIDEOs generally have their own menus which show

DVD

disc contents and you can display them on the TV screen.

You can locate a desired scene by using these menus.

VIDEO

NOTE

• If you want to play a PBC-compatible VCD/SVCD without using the

PBC function, perform any of the following:

7Whenever a DVD VIDEO is loaded

•

Start playback by pressing number buttons while stopped.

Press xrepeatedly until the desired track number is displayed,

then start playback by pressing 3(play button).

The track number appears on the display window instead of

“PBC”.

1 Press TOP MENU/PG or MENU/PL.

•

The menu appears on the TV screen.

Example:

• To activate the PBC function when playing a PBC-compatible VCD/

SVCD without using the PBC function, perform any of the following:

•

Press TOP MENU/PG or MENU/PL.

•

Press 7twice to stop playback, then press 3(play button).

Locating a desired chapter/track using the

on-screen bar

Normally, a DVD VIDEO which contains more than one title

will have a “top” menu which lists the titles. Press

TOP MENU/PG to show the title menu.

Some DVD VIDEO may also have a different menu which is

shown by pressing MENU/PL.

7During playback

DVD DVD DVD

VIDEO AUDIO VR

See the instructions for each DVD VIDEO regarding its

1 Press ON SCREEN twice.

2 ^pU^ars^tie^culC^aru^mr^es^nuo^.r 3/2/Y/5to select a

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

desired item.

3 Press ENTER.

• With some discs, you can also select items by entering the

corresponding number using number buttons.

Example:

During DVD VIDEO playback

Dolby D

Locating a desired scene using a VCD/

SVCD menu with PBC

2/0 . 0ch

A VCD or SVCD recorded with PBC has its own menus

such as a list of contained songs. You can locate a

specific scene by using these menus.

4 Press number buttons (0-9) to enter the

desired chapter number.

Example:

7During playback with PBC function

To select 8:

To select 10:

To select 20:

To select 37:

Press 8.

1 Press RETURN repeatedly until the

Press 1, then 0.

Press 2, then 0.

Press 3, then 7.

menu appears on the TV screen.

Example:

To correct a misentry

5 ^RP^er^pe^eas^ts^steE^{p 4}N^.TER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• You can select up to the 99th chapter/track.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

Locating a desired position by specifying

the time

Using the file control

display

7For DVD VIDEO/DVD AUDIO/DVD VR:

DVD DVD DVD

VIDEO AUDIO VR

You can search and play desired groups and

tracks/files using the file control display on

the TV screen.

During playback

For VCD/SVCD:

While stopped or during playback without PBC

function

For CD:

Current group/total group Playback mode* (PROGRAM,

number

RANDOM, REPEAT)

During playback or while stopped

Elapsed playing time of current

track (for MP3/WMA/MPEG-4

only)

Tag information (for MP3/

WMA only)

7 When specifying the elapsed playing time from the

beginning of the disc

Perform the following procedure while stopped.

7 When specifying the elapsed playing time from the

beginning of the current title/track

Perform the following procedure during playback.

1 Press ON SCREEN twice.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

Dolby D

2/0 . 0ch

Current group

Current track (file)

4 Use number buttons (0-9) to enter the

Current track (file) / total track

(file) number on current group

Total track (file)

number on disc

time.

Example:

Playback status

To play back from a point 2 (hours): 34 (minutes): 08 (seconds)

elapsed

* (For MPEG 4) The Program and Random mode are not available.

Press 2

Press 4

Press 3

Press 0

The file control display appears automatically during playback

(MP3/WMA) or while stopped.

7For MP3/WMA:

During playback or while stopped

For JPEG/MPEG-4:

Press 8

To cancel a misentry

1^WP^hir^lee^ss^tos^ppC^edursor 3/2/Y/5to select the

5 ^PP^rer^se^ss^Cs^ursE^orN²T^rE^epR^ea.^tedly.

desired group/track/file.

2 ^•Pr^Fe^ors^Ms^P3^3/WM(p^Al^,a^py^layb^bau^ct^kt^so^tan^rts)^fo^ror^mE^thN^{e s}T^elE^ecR^ted. ^track.

6 Press ON SCREEN.

The on-screen bar disappears.

• Track playback/slide-show starts from the selected track/

file.

NOTE

• When you press ENTER for JPEG, only the selected file is

played back.

• You can specify time in hours/minutes/seconds for DVD VIDEO/

DVD AUDIO/DVD VR and in minutes/seconds for VCD/SVCD/CD.

NOTE

• (For MP3/WMA) During playback, you can locate the desired track/

file by pressing x/4or Cursor 5/Y.

• You can also check playback information on the display window.

(A pg. 19)

• Some group, track and file names may not be displayed correctly

depending on recording conditions.

• The order of groups, tracks and files may be displayed differently

from the order displayed on your personal computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

Resume playback

Selecting the subtitle

When Resume Playback is set to “ON” (A pg. 36)

and you stop playback by the following operations,

the position where playback has been stopped is

stored. (“RESUME” appears on the display

window.)

7During playback of a disc containing subtitles in

DVD DVD DVD

VIDEO AUDIO VR

DVD DVD DVD

VIDEO AUDIO VR

several languages

When using the SUBTITLE button:

1 Press SUBTITLE.

• Turning off the power (A pg. 14)

• Pressing 7once

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 subtitle languages recorded.

• Changing the source (A pg. 15)

To start playback from the stored position

Press 3(play button) or DVD.

• There may be a case where 3(play button) does not work after

changing the source.

2 Press Cursor Y/5to select the desired

To clear the stored position

Press 7again or open the disc tray.

subtitle.

For DVD VR

• Pressing SUBTITLE activates the subtitles (subpictures)

regardless of whether the subtitles are recorded or not.

(subpictures will not change if no subpictures is recorded.)

Selecting a view angle

7During playback of a disc containing multi-view

DVD DVD

VIDEO AUDIO

For SVCD

angles

• An SVCD can contain up to four subtitles. Pressing

SUBTITLE changes the subtitles regardless of whether the

subtitles are recorded or not. (Subtitles will not change if no

subtitle is recorded.)

When using the ANGLE button:

1 Press ANGLE.

Example:

NOTE

The first view angle is selected out of 3 view angles recorded.

• To clear the subtitle, press SUBTITLE. Each time you press

SUBTITLE, subtitle appears and disappears alternately.

When using the on-screen bar:

1 Press ON SCREEN twice.

2 Press ANGLE repeatedly or press

Cursor Y/5to select the desired view

angle.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

When using the on-screen bar:

Dolby D

2/0 . 0ch

1 Press ON SCREEN twice.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

4 Press Cursor Y/5repeatedly to select

the desired subtitle.

Dolby D

2/0 . 0ch

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

4 Press Cursor Y/5to select the desired

NOTE

• To clear the subtitle, press SUBTITLE. Each time you press

SUBTITLE, subtitle appears and disappears alternately.

• Some subtitle or audio languages are abbreviated in the pop-up

window. See “The language codes list” (A pg. 34).

• During DVD AUDIO playback, this feature is available only for the

video part.

view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• During DVD AUDIO playback, this feature is available only for the

video part.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

Selecting the audio

Special picture playback

7During playback of a disc containing audio in

DVD DVD DVD

VIDEO AUDIO VR

several languages

Frame-by-frame playback

When using the AUDIO button:

7During playback

DVD DVD DVD

VIDEO AUDIO VR

Press 8repeatedly.

1 Press AUDIO.

Each time you press the button, the still picture

advances by one frame.

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 audio languages recorded.

To return to normal playback

Press 3(play button).

Playing back in slow-motion

7During playback

DVD DVD DVD

VIDEO AUDIO VR

2 Press AUDIO repeatedly or press

Cursor Y/5to select the desired audio.

1 Press 8at the point where

you want to start playback in

slow-motion from.

When using the on-screen bar:

1 Press ON SCREEN twice.

2 ^TP^hr^ee^ss^yss^temS^pL^aO^useW^{s pl}9^ayb.^ack.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

• Playback in forward slow-motion starts.

For DVD VIDEO/DVD AUDIO only:

• To play back in reverse slow-motion, press SLOW (.

Each time you press the button, the playback speed become

faster.

Example: On the TV

4 Press Cursor Y/5to select the desired

audio.

To return to normal playback

Press 3(play button).

5 Press ENTER.

NOTE

6 Press ON SCREEN.

• Sound cannot be heard during slow-motion playback.

• During DVD AUDIO playback, this feature is available only for the

video part.

The on-screen bar disappears.

NOTE

• Some subtitle or audio languages are abbreviated in the pop-up

window. See “The language codes list” (A pg. 34).

• “ST”, “L” or “R” is displayed when playing a VCD, SVCD or DVD

VR respectively representing “stereo”, “left sound” and “right

sound”.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

Selecting browsable still picture recorded

on DVD AUDIO

NOTE

• The number of the magnification steps varies depending on the disc

type.

Most DVD AUDIOs include browsable still pictures

(B.S.P.), which usually appear by turns automatically

during playback according to the playback sequence. You

can change the picture (turn the page) manually when the current

group/track has selectable pictures (pages).

• During slide-show playback of JPEG, zooming in is not available. In

such a case, press 8to pause slide-show playback, then zoom in.

• During DVD AUDIO playback, this feature is available only for the

video part.

• During JPEG/MPEG-4 playback, there may be a case where Cursor

(3/2/Y/5) does not work in step 2 above.

7During playback and while the B.S.P. indicator lights up on the

display window

Changing the VFP setting

When using the PAGE button:

The VFP (Video Fine Processor) function enables

DVD DVD DVD

VIDEO AUDIO VR

Press PAGE repeatedly to select a desired

still picture.

you to adjust the picture character according to the

type of programming, picture tone or personal

preference.

When using the on-screen bar:

7During playback

1 Press ON SCREEN twice.

1 Press VFP.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

The current VFP settings appear on the TV screen.

Example:

Dolby D

2/0 . 0ch

4 Press Cursor 5/Yto select the desired

still picture.

2 Press Cursor 3/2repeatedly to select

the VFP mode.

5 Press ENTER.

• NORMAL:Normally select this.

• CINEMA: Suitable for movies.

When you select “NORMAL” or “CINEMA”, press VFP to

complete the setting.

6 Press ON SCREEN.

The on-screen bar disappears.

• USER 1 and USER 2:

Zooming in

You can adjust parameters that affect picture

appearance.

7During playback or while paused

DVD DVD DVD

VIDEO AUDIO VR

Only when selecting “USER 1” or “USER 2” in step

2, proceed to perform the following operation;

1 Press ZOOM.

Each time you press ZOOM, scene

3 Press Cursor Y/5repeatedly to select

2 ^mW^aghⁿiⁱl^fie^caz^tiooⁿo^cm^hane^gd^es.in, press Cursor 3/2/Y/

a parameter you want to adjust.

Adjust gradually and confirm picture appearance results are as

preferred.

5to move zoom-in area.

• GAMMA:

To return to normal playback

Press ZOOM repeatedly to select ZOOM OFF.

Controls brightness of neutral tints while maintaining

brightness of dark and bright portions.

• BRIGHTNESS:

Controls screen brightness.

• CONTRAST:

Controls screen contrast.

• SATURATION:

Controls screen color depth.

• TINT:

Controls screen tint.

• SHARPNESS:

Controls screen sharpness.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

4 Press ENTER.

2 Follow the instructions that appear on

the TV screen to program the desired

chapters/tracks.

Example:

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 20).

• The content’s numbers that you have to specify for

programming varies depending on the disc type:

5 Press Cursor Y/5to change the

setting.

•

DVD VIDEO:

VCD, SVCD, CD:

DVD AUDIO, MP3, WMA:

Groups and tracks

Titles and chapters

Tracks

6 Press ENTER.

7 ^TR^he^ep^cue^rra^ent^ts^Vt^Fe^Pp^ses^ttin3^gsto^app6^eat^ro^agaaⁱⁿd^.just other

• Before you program the tracks in bonus group on a DVD

AUDIO, perform the procedure of “Playing back a bonus

group” (A pg. 21) to turn off the BONUS indicator on the

display window.

• You can specify the chapters/tracks whose number is up to

99.

• (For CD, SVCD or VCD) When the total playback time

exceeds 99 minutes 59 seconds, “–:–” will appear on the

display window. But, it is possible to continue

programming.

parameters.

8 Press VFP.

NOTE

• Although the setting display disappears in the middle of the

procedure, the setting at that time will be stored.

• (For DVD VIDEO, DVD AUDIO, MP3 or WMA) When

you press ENTER instead of the number buttons in the

Track/Chapter column, “ALL” appears and all the tracks or

chapters on the selected group or title are programmed as a

step.

Program playback

7While stopped

DVD DVD

VIDEO AUDIO

To clear the programs one by one from the last

entered number

Press CANCEL repeatedly.

1 Press PLAY MODE

repeatedly until program

window appears on the TV screen.

To clear all programs

Press 7.

You can also clear the program by turning off the system.

3 Press 3(play button).

If all of the programmed tracks/files have been played back,

playback stops and the program window appears again. Note

that program setting remains.

To check the program contents

During playback, press 7. Playback stops and the program window

appears.

To quit the Program mode

While stopped, press PLAY MODE repeatedly until both program

window and

disappear from the TV screen.

NOTE

• The Resume function cannot be used with Program Playback.

• Program Playback may not work for some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

Display

window

TV screen

Meanings

Random playback

You can play titles or tracks on a disc in random

order.

Repeats the current group for

DVD AUDIO/MP3/WMA/

JPEG/MPEG-4.

DVD DVD

VIDEO AUDIO

REPEAT GROUP

7While stopped

Repeats the current title for

DVD VIDEO.

1 Press PLAY MODE

(For DVD VR) Repeats the

current title for Original

program.

repeatedly until

appears on the TV screen.

2 Press 3(play button).

(For DVD VR) Repeats the

current playlist for Playlist.

To quit Random mode

Repeats all title/tracks/files for

DVD VR/VCD/SVCD/CD/

MP3/WMA/JPEG/MPEG-4.

While stopped, press PLAY MODE repeatedly until both program

window and disappear from the TV screen.

You can also clear the Random mode by turning off the system.

ALL

REPEAT ALL

Repeats the current track for

DVD AUDIO/VCD/SVCD/CD/

MP3/WMA/MPEG-4.

NOTE

REPEAT TRACK,

REPEAT STEP

• The same title/track will not be played back more than once during

Random Playback.

Repeats the current chapter for

DVD VIDEO/DVD VR.

REPEAT STEP

Repeat playback

Repeat mode is off.

The system plays back the disc

normally.

indication

Repeating the current selection

NOTE

7For DVD VIDEO/DVD VR:

DVD DVD DVD

VIDEO AUDIO VR

During playback

• For DVD VIDEO and DVD AUDIO, REPEAT ALL may not be

available depending on the disc.

For VCD/SVCD:

During playback without PBC function or

stopped

For DVD AUDIO/CD/MP3/WMA/JPEG/

MPEG-4:

During playback or stopped

When using the on-screen bar (except for MP3/

WMA/JPEG/MPEG-4):

1 Press ON SCREEN twice.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

When using the REPEAT button:

Press REPEAT.

Dolby D

2/0 . 0ch

: 3

1 2_.

Repeat mode indicator

Each time you press REPEAT, the Repeat mode changes.

4 Press Cursor Y/5repeatedly to select

the Repeat mode.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

To cancel Repeat Playback

Select “OFF” in step 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

To cancel

Select “OFF” in step 4, then press ENTER.

Repeating a desired part [A-B Repeat]

You can repeat playback of a desired part by

DVD DVD DVD

VIDEO AUDIO VR

NOTE

specifying the beginning (point A) and ending

(point B).

• When playing back a DVD VIDEO, A-B Repeat Playback is possible

only within the same title.

• “A-B” cannot be selected during Program and Random Playback.

7During playback

When using the A-B RPT button:

1 Press A-B RPT at the beginning of the

Tray lock

You can lock the tray and prohibit the unwanted disc ejection.

part you want to repeat (point A).

The repeat mode indicator “

” appears on the display

2 ^wPⁱrⁿe^dos^ws^.A-B RPT again at the end of the

On the center unit ONLY:

While the system is turned off

part you want to repeat (point B).

The repeat mode indicator on the display window changes to

“

” and A-B Repeat Playback starts. The selected part

of the disc (between point A and B) is played repeatedly.

Press and hold

• The system turns on and “LOCKED” appears on the display

window.

• If you try to eject the disc, “LOCKED” appears to indicate that

the tray is locked.

To cancel

Press A-B RPT during A-B Repeat Playback.

To cancel

Carry out the same operation again.

• The system turns on and “UNLOCKED” appears on the display

window.

When using the on-screen bar:

1 Press ON SCREEN twice.

2 P^Thr^ee^os^n-s^scrC^eeuⁿr^bs^aro^ar^pp3^ears/2^{on th}t^eo^Th^Vi^sg^crh^eelⁿig^.ht

3 Press ENTER.

Dolby D

2/0 . 0ch

4 Press Cursor Y/5repeatedly to select

“A-B”.

5 Press ENTER at the beginning of the

part you want to repeat (point A).

Dolby D

2/0 . 0ch

6 Press ENTER at the end of the part you

want to repeat (point B).

7 ^AP^-r^Be^Rs^es^peO^{at P}N^layS^bC^ackR^sE^tarE^tsN^..

The on-screen bar disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 22 for button locations.

Advanced operations

3 Press Cursor 3/2to make an

Sound and other settings

adjustment or selection.

Example:

IMPORTANT

Before using the remote control for the following

operation;

D E

D D

• Set the remote control mode selector to AUDIO.

The adjustment is set and the display automatically disappears

a few seconds later.

NOTE

Before you start operation;

• There is a time limit when doing the following steps. If the setting is

cancelled before you finish, start from step 1 again.

NOTE

• When “DD” or “DTS” is selected, if a signal encoded with another

digital format comes in, you cannot listen to the sound. (The

GDIGITAL or Cindicator flashes.)

1 Press SETTING.

Example:

D E

A /

C M

2 Press Cursor Y/5to select the item

you want to set.

• DEC (Decode):

When you play an external source (DBS D is selected as a

source) that was encoded with DOLBY D or DTS Digital

Surround, the following symptoms may occur;

• No sound comes out at the beginning of playback.

• Noise comes out while searching for or skipping chapters

or tracks.

A/PCM (Auto/PCM):

Normally select this. The system

automatically detects the incoming signals.

DD:

Select this if the symptoms above occur

when playing a disc (or software) encoded

with DOLBY D.

DTS:

Select this if the symptoms above occur

when playing a disc (or software) encoded

with DTS Digital Surround.

• BAL (Balance):

You can adjust the balance between the front left and front

right speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

NOTE

Using the setup menus

• You can change the language used in the setup menus. See

• See the following “The language codes list” for the code of each

language, such as “AA”, etc.

“Menu description” below.

The language codes list

Basic operation on the setup menus

AA Afar

IK Inupiak

IN Indonesian

IS Icelandic

IW Hebrew

RN Kirundi

RO Rumanian

RU Russian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

IMPORTANT

Before using the remote control for the

following operation;

AB Abkhazian

AF Afrikaans

AM Ameharic

AR Arabic

1 Set the remote control mode selector to

Yiddish

AUDIO.

2 Press DVD.

AS Assamese

AY Aymara

AZ Azerbaijani

BA Bashkir

BE Byelorussian

BG Bulgarian

BH Bihari

JW Javanese

KA Georgian

KK Kazakh

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

KL Greenlandic

KM Cambodian

KN Kannada

KO Korean (KOR)

KS Kashmiri

Cursor

ENTER

(3/2/Y/5)/

ENTER

SL Slovenian

SM Samoan

SN Shona

BI Bislama

SET UP

BN Bengali, Bangla KU Kurdish

SO Somali

BO Tibetan

BR Breton

CA Catalan

CO Corsican

CS Czech

KY Kirghiz

LA Latin

SQ Albanian

SR Serbian

SS Siswati

7While stopped

LN Lingala

LO Laothian

LT Lithuanian

ST Sesotho

SU Sundanese

1 Press SET UP.

CY Welsh

LV Latvian, Lettish SV Swedish

DA Danish

DZ Bhutani

EL Greek

MG Malagasy

MI Maori

SW Swahili

TA Tamil

MK Macedonian

ML Malayalam

MN Mongolian

MO Moldavian

MR Marathi

TE Telugu

TG Tajik

EO Esperanto

ET Estonian

EU Basque

FA Persian

FI Finnish

FJ Fiji

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

MS Malay (MAY)

MT Maltese

2 Follow the instructions that appear on

the TV screen.

FO Faroese

FY Frisian

GA Irish

MY Burmese

NA Nauru

NE Nepali

Menu description

GD Scots Gaelic

GL Galician

GN Guarani

GU Gujarati

HA Hausa

NL Dutch

NO Norwegian

OC Occitan

TW Twi

UK Ukrainian

UR Urdu

:Language menu (LANGUAGE)

OM (Afan) Oromo

OR Oriya

UZ Uzbek

VI Vietnamese

WO Wolof

VO Volapuk

XH Xhosa

YO Yoruba

7MENU LANGUAGE

HI Hindi

PA Panjabi

Some DVDs have their own menus in multiple languages.

• Select the initial language*.

HR Croatian

HU Hungarian

HY Armenian

IA Interlingua

IE Interlingue

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

7AUDIO LANGUAGE

Some DVDs have multiple audio languages.

• Select the initial audio language*.

RM Rhaeto-Romance ZU Zulu

7SUBTITLE

Some DVDs have multiple subtitle languages.

• Select the initial subtitle language*.

7ON SCREEN LANGUAGE

• Select the language shown on the TV screen when operating this

system.

* When the language you have selected is not recorded to a disc,

the original language is automatically used as the initial

language.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

:Audio menu (AUDIO)

:Picture menu (PICTURE)

7MONITOR TYPE

You can select the monitor type to match your TV when you play

DVDs recorded in the picture’s height/width ratio of 16:9.

• 16:9/16:9 MULTI (Wide television conversion)

Select this when the aspect ratio of your TV is fixed on 16:9

(wide TV).

7D. RANGE COMPRESSION

(Dynamic range compression)

You can enjoy low level recorded sound clearly at night even at a

low volume when listening to the sound with Dolby Digital.

• AUTO

Select this when you want to enjoy surround sound with its

full dynamic range (no effect applied).

• ON

Select this when you want to fully apply the compression

effect (useful at midnight).

When you play DVDs recorded in the picture’s height/width

ratio of 4:3, the system adjust the ratio of output signal

automatically.

• 4:3 LB/4:3 MULTI LB (Letter Box conversion)

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen picture, the

black bars appear on the top and the bottom of the screen.

• 4:3 PS/4:3 MULTI PS (Pan Scan conversion)

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen picture, the

black bars do not appear, however, the left and right edges of

the pictures will not be shown on the screen.

NOTE

• When you play a multichannel Dolby Digital source with the

surround mode is off, the setting of D. RANGE COMPRESSION is

set to ON automatically.

Ex.: 16:9

Ex.: 4:3 LB

Ex.: 4:3 PS

NOTE

• Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size may

become “4:3 LB” or “4:3 MULTI LB” with some DVDs. This

depends on how DVDs are recorded.

• When selecting “MULTI” options as the monitor type for the multi-

color system TV, this system outputs PAL or NTSC video signal

according to the disc, regardless of the scan mode setting. (A pg. 16)

7PICTURE SOURCE

When you set the scan mode to the progressive (“PAL PRG” or

“NTSC PRG”) (A pg. 16), you can obtain optimal picture quality

by selecting whether the content on the disc is processed by frame

(film source) or by field (video source) .

Normally set to “AUTO”.

• AUTO

Used to play a disc containing both video and film source

materials.

This system recognizes the source type (video or film) of the

current disc according to the disc information.

• If the playback picture is unclear or noisy, or the oblique

lines of the picture are rough, try to change to other modes.

• FILM

Suitable for playing back a film source disc.

• VIDEO

Suitable for playing back a video source disc.

7SCREEN SAVER (A pg. 20)

You can activate or deactivate Screen Saver function.

7FILE TYPE

When several types of files are recorded on a disc, you can select

which files to play.

• AUDIO

Select this to play MP3/WMA files.

• STILL PICTURE

Select this to play JPEG files.

• VIDEO

Select this to play MPEG-4 files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

:Speaker setting menu

(SPK. SETTING)

:Other setting menu (OTHERS)

7RESUME

You can activate or deactivate Resume Playback function.

7Level menu (LEVEL)

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

While monitoring the test tone, adjust the center and surround

speakers volume as much as that of the front speakers.

(A pg. 27)

7ON SCREEN GUIDE

You can activate or deactivate the on-screen guide icons.

(A pg. 18)

TEST TONE*

Outputs the test tone.

* The test tone comes out of all of the activated speakers in the

following sequence:

sFront left speaker sCenter speaker sFront right

speaker sSurround right speaker sSurround left

speaker s(back to the beginning)

7Delay menu (DELAY)

Example:

Center

speaker

1 ms

Subwoofer

Front right

0 ms

Front left

0 ms

Surround left

2 ms

Surround right

2 ms

In this case, set the delay time of each speaker as follows;

• Delay time of front speakers: 0 ms

• Delay time of center speaker: 1 ms

• Delay time of surround speakers: 2 ms

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

Adjust the distance from the listening position to the speakers.

Within the range from 0 ms to 15 ms. (by 1 ms)

7Subwoofer menu (SUBWOOFER)

LEVEL

You can set the output level of the subwoofer in the -6 dB to +6 dB

range.

CROSS OVER

The signals below the preset frequency level will be sent to and be

reproduced by the subwoofer.

Select one of the cross over frequency levels according to the bass

sound quality from the front/center/surround speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner operations

IMPORTANT

Before using the remote control for the

following operation;

Manual tuning

1 Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

1 Press FM/AM repeatedly to select the

band.

Example:

NOTE

When the system is tuned in to 810 kHz.

• When FM or AM is selected as the source, you can select All Channel

Stereo (ALL ST) and SURR OFF mode.

0 _kHz

The buttons described below are used on pages 37 and

38.

2 Press TUNING 9/(repeatedly until

you find the frequency you want.

FM/AM

When you hold down the button until the system starts

searching for stations and then release it, the system stops

searching automatically when a station of sufficient signal

strength is tuned in to.

FL DISP.

Remote control

mode selector

AUDIO

NOTE

• When an FM stereo program is received, the ST indicator lights on the

display window.

TUNING

MEMORY

FM MODE

Number buttons

Setting the AM tuner

interval spacing

Some countries space AM stations 9 kHz apart, and some countries

use 10 kHz spacing.

You can only change the AM tuner interval spacing while tuning

into an AM station.

• You can operate the following procedures using the buttons on

the front panel.

On the center unit ONLY:

7To change the interval spacing into 10 kHz

Press 8while holding down 7.

7To change the interval spacing into 9 kHz

Press 3while holding down 7.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 37 for button locations.

Tuner operations

Preset tuning

Once a station is assigned to a channel number, the station can be

quickly tuned in. You can preset 30 FM and 15 AM stations.

Selecting the FM

reception mode

When the stereo FM program currently tuned in is noisy, you can

change the FM reception mode to improve the reception.

7 To preset the stations

7While listening to an FM station

Press FM MODE.

The FM reception mode appears on the display window.

Each time you press the button, the FM reception mode changes.

• AUTO:

When a program is broadcast in stereo, you will hear stereo

sound. (The ST indicator lights on the display window.) When in

monaural, you will hear monaural sound. This mode is also

useful to suppress static noise between stations.

• MONO:

1 Tune in the station you want to preset.

• If you want to store the FM reception mode for an FM

station, select the reception mode you want. See “Selecting

the FM reception mode”.

Example:

When the system is tuned in to 103.5 MHz.

MHz

1 0 3 5 0

Reception will be improved although you will lose the stereo

effect. (The MONO indicator lights on the display window.) In

this mode, you will hear noise until you are tuned in to a station.

2 Press MEMORY.

MHz

_CH_ _

5 0

1 0 3

Reducing the noise of AM

broadcast

When listening to an AM broadcast with a lot of noise interference,

you can change the Beat Cut mode to reduce the noise.

7While “CH” and “– –” are flashing

3 Press number button(s) (1-10, +10) to

select a preset number you want.

• For details on using the number buttons, see “How to use the

7While listening to an AM station

number buttons” (A pg. 20).

Press FM MODE.

Example:

When the preset channel 1 is selected.

The current Beat Cut mode appears on the display window.

Each time you press the button, the Beat Cut mode changes.

• Choose “BEATCUT1” or “BEATCUT2” according to which

gives clearer sound.

MHz

3 5 0

If the setting is cancelled before you finish, start from step 2

again.

7While the selected number is flashing

4 Press MEMORY.

The selected number stops flashing.

The station is assigned to the selected preset number.

If the setting is cancelled before you finish, start from step 2

5 ^aR^gaeⁱⁿp^.eat steps 1 to 4.

• Storing a new station to a used number erases the previously

stored one.

7 To tune in to a preset station

1 Press FM/AM repeatedly to select FM or

AM.

2 Press number button(s) (1-10, +10) to

select a preset number.

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 20).

NOTE

• You can also select a preset number by pressing y /1.

Download from Www.Somanuals.com. All Manuals Search And Download.

KARAOKE operations

DVD

VIDEO

To repeat a disc/chapter/title/track during KARAOKE

mode

Set the Repeat mode. See “Repeat playback” (A pg. 31).

• The icon such as

shows the disc formats or file types the

operation is available for.

IMPORTANT

Before using the remote control for the following

operation;

To enjoy Karaoke using a menu screen

See “Playing from a specified position on a disc” (A pg. 25).

• Set the remote control mode selector to AUDIO.

NOTE

• While playback is paused, no sound (voice) via the microphone is

heard from the speakers.

• KARAOKE function cannot be turned on in FM/AM, DBS D and

VCR mode.

• You cannot turn on KARAOKE function while playing back an

MPEG-4/DVD AUDIO/DVD VR disc.

The buttons described below are used on pages 39 and

40.

• KARAOKE function will be canceled when you change the source by

pressing a source selecting button or when pressing OPEN/CLOSE

(A pg. 18).

TOP MENU/PG

MENU/PL

• When KARAOKE function is on:

Cursor

(3/2/Y/5)

•

The surround mode (A pg. 22) is canceled.

SCREEN

Reserving songs

TITLE/GROUP

You can reserve your desired songs (groups/titles

and tracks/chapters) to play in the order of your

choice.

DVD

VIDEO

Number buttons

100+

Up to 12 songs can be reserved with this

function.

CANCEL

ECHO

VOCAL

7 While stopped with KARAOKE function turned on

MIC ON/OFF VOCAL

ECHO

RESERVE

MIC ON/OFF

1 Press RESERVE.

DIMMER

KEYCON.

i/I

2 ^TP^hr^ee^res^ss^ervn^atu^iom^{n li}b^ste^ar^ppb^eau^rst^otⁿo^tn^hes^T(^V1^s-^c1^re0^en,^.+10) to

select your desired song to reserve by

specifying the group/title, and track/

chapter numbers.

STANDBY

Example:

MIC LEVEL

MIN

MAX

MIC

To specify “track/chapter (Tr/Chap) 2” of “group/title (Gr/Tt)

1”: Press 1 s 2

MIC LEVEL MIC 1/2

To specify “track/chapter (Tr/Chap) 14” of “group/title (Gr/Tt)

2”: Press 2 s +10 s 4

To specify “track/chapter (Tr/Chap) 20” of “group/title (Gr/Tt)

1”: Press 1 s +10 s 10

Basic KARAOKE

operations

No Gr/Tt Tr/Chap

1 Connect a microphone to

MIC 1 or MIC 2 on the center

unit.

DVD

VIDEO

To erase a reserved song

Press Cursor Y/5 to select the desired song (group/title, and

2 Press the MIC ON/OFF button so that

track/chapter numbers), then press CANCEL.

lights on the display window.

To add a song to the reservation list

Press Cursor Y/5 to select the desired song (group/title, and

track/chapter numbers), then specify a new group/title, and

track/chapter numbers. The new song is inserted before the

selected song.

3 Start playback.

4 ^ST^eu^er^“Bn^asM^icI^pC^layL^baE^ckV^”E^(AL^pt^go^{. 1}a⁸⁾d^.just the

microphone’s volume.

• This control adjust the output volume of both MIC 1 and

MIC 2 together.

3 Repeat step 2 to reserve the rest of your

selection.

4 Press 3 (play button) to start playback

5 Sing along with the playback of the

of the reserved songs.

song.

To turn off KARAOKE function

Press MIC ON/OFF so that

disappears from the display

window.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 39 for button locations.

KARAOKE operations

To hide or show the reservation list

Press RESERVE. Each time you press RESERVE, the reservation

list disappears/appears from/on the TV screen. The reservation list

cannot be displayed during playback.

Adding an echo effect to

your voice

7 During playback with KARAOKE function

NOTE

DVD

VIDEO

turned on

• When “ ” appears in step 2, 12 songs have already been reserved

and you cannot make more reservations.

• While the reservation list is not displayed on the TV screen, you

cannot start playback of the reserved songs by pressing 3 (play

button). Be sure to press RESERVE to display the reservation list

before you start playback.

• You can additionally reserve a song after the current playing reserved

song. In such a case, press 7 and perform the procedure from step 2

through 4.

Press ECHO repeatedly to

select the desired effect level.

“ECHO” and its value appear on the display window.

• Each time you press ECHO, vocal option changes as

follows; OFF s 1 s 2 s 3 s (back to the beginning)

• As the number increases, the effect will be emphasized.

(Normally set the level to “2”.)

To cancel the sound effect

Select “OFF” in the procedure above.

Selecting audio

Most Karaoke discs have the capability of adding “Guide vocal” or

“Guide melody” to the Karaoke accompaniment.

Shifting the pitch of the

playback sound

Selecting audio channel(s) [AUDIO]

You can sharp/flat the pitch of a song recorded on

DVD

With most DVD Karaoke discs, you can select audio

channel(s) among some options called “with guide

DVD

VIDEO

a disc by a halftone interval to match your voice

VIDEO

range. Note that this setting is applied only to the

current title/track.

vocal”, “with guide melody”, and “accompaniment

only”, etc. to enjoy Karaoke to your preference.

7 During playback with KARAOKE function turned on

7 During playback

1 Press KEYCON. i/I.

1 Press AUDIO.

The current setting appears on the display window.

For MP3/WMA: (in the file control display)

The following indication appears on the TV screen.

Example for a video CD: (pop-up window)

KEY CONT 0

7 While the current setting is still on the display window

2 Press KEYCON. i/I repeatedly to adjust

the pitch (–6 to +6).

2 Press AUDIO repeatedly or press

Cursor Y/5 to select the desired audio

channel.

The following indication appears on the TV screen.

For DVD VIDEO/VCD/SVCD/CD: (pop-up window)

KEY CONT

Each time you press AUDIO, audio channel changes as

follows;

JAPANESE

Example for a video CD:

• Press KEYCON. i to sharp and KEYCON. I to flat the

ST s L s R s (back to the beginning)

• ST: To listen to L (left) and R (right) audio channel.

• L: To listen to L (left) audio channel.

• R: To listen to R (right) audio channel.

pitch.

To resume normal playback

Select “0” in the procedure above.

NOTE

• Depending on the type of the recorded source (such as a DTS Digital

Surround software, etc.), you may not be able to shift the pitch.

• When “ ” appears on the TV screen, the disc does not contain multi

audio channels or this operation is prohibited.

Masking the vocal recorded on a normal

disc [VOCAL MASK]

You can enjoy Karaoke with a normal disc

DVD

(containing no multiplex audio or multisound

VIDEO

Karaoke audio, etc.) by attenuating the

frequencies around a human voice with this

function.

7 During playback with KARAOKE function turned on

Press VOCAL.

Each time you press VOCAL, vocal mask function turns on

and off alternately.

NOTE

• The voice may not be masked enough with some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

References

To clean the disc

Wipe the disc with a soft cloth in a straight line

from center to edge.

• DO NOT use any solvent — such as

conventional record cleaner, spray,

thinner or benzine — to clean the disc.

Maintenance

7 Handling Discs

• Remove the disc from its case by holding it at

the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc or

bend the disc.

7 Cleaning the system

• Stains on the system should be wiped off with a soft cloth. If the

system is heavily stained, wipe it with a cloth soaked in water-

diluted neutral detergent and wrung well, then wipe clean with a

dry cloth.

• Put the disc back in its case after use to

prevent warping.

• Be careful not to scratch the surface of the

disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature

extremes and moisture.

• Since the system may deteriorate in quality, become damaged or

get its paint peeled off, be careful about the following.

•

DO NOT wipe it with a hard cloth.

DO NOT wipe it strong.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as insecticides to it.

DO NOT allow any rubber or plastic to remain in contact with

it for a long time.

Troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

Power does not come

on.

The power cord and/or system cord is not connected.

Connect the power cord and system cord correctly.

(A pg. 11)

The remote control does The batteries are exhausted.

not work.

Replace the batteries. (A pg. 7)

Sunlight is falling directly on the remote sensor.

Hide the remote sensor from direct sunlight.

No sound.

The system cord and/or speaker cord is not connected. Check the connection. “Connecting the powered

subwoofer”. (A pg. 9, 11)

The audio cord is not connected to DIGITAL IN

correctly.

Connect the cord correctly. (A pg. 11)

An incorrect source has been selected.

The decode mode is not set correctly.

Select the correct source. (A pg. 15)

Select the proper decode mode. (A pg. 33)

Connect the cord correctly. (A pg. 10)

Use a playable disc. (A pg. 3)

No picture is displayed The video cord is not connected correctly.

on the TV screen.

The disc is not playable.

No picture is displayed The scan mode is set to “PAL PRG” or “NTSC PRG”

Change the scan mode to “PAL” or “NTSC”.

on the TV screen, the

though the center unit is connected to the TV which

(A pg. 16)

picture is blurred, or the does not support the progressive video input such as a

picture is divided into

two parts.

conventional TV.

Video and audio are

distorted.

The disc is scratched or dirty.

Replace or clean the disc.

A VCR is connected between the center unit and the

TV.

Connect the center unit and TV directly. (A pg. 10)

The picture does not fit The monitor type is not set correctly.

the TV screen.

Set “MONITOR TYPE” properly. (A pg. 35)

Hard to listen to

broadcast because of

noise.

Antennas are disconnected.

Reconnect the antennas correctly and securely.

(A pg. 8)

Download from Www.Somanuals.com. All Manuals Search And Download.

References

7 Subwoofer (SP-PWS77)

Amplifier section

Specifications

Front:

140 W per channel, RMS at 4 C at

1 kHz, with 10 % total harmonic

distortion.

130 W per channel, RMS at 4 C at

1 kHz, with 10 % total harmonic

distortion.

Center unit (XV-THS77)

Audio section

Center/Surround:

Subwoofer:

Total Harmonic Distortion 0.02 %

NOTE: This value is measured at System cord CONNECTOR for

reference.

140 W, RMS at 4 C at 100 Hz, with

10 % total harmonic distortion.

Audio input level

AUDIO IN (VCR):

270 mV/47 kC

Digital input* :

Speaker section

Speaker unit:

DIGITAL IN:

–21 dBm to –15 dBm

16 cm Bass-reflex

Power Handling Capacity: 140 W

(OPTICAL)

(660 nm E30 nm)

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital

Impedance:

Frequency Range:

4 C

Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)

30 Hz to 200 Hz

Video section

Video System:

Horizontal Resolution:

Signal-to-Noise Ratio:

Video input sensitivity/Impedance (VCR IN)

General

Power Requirements:

PAL/NTSC

500 lines

64 dB

AC 110 V/AC 127 V/AC 220 - 240 V

, 50 Hz/60 Hz

Power Consumption:

Dimensions (W MH MD):

Mass:

135 W (at operation)

0 W (in standby mode)

Composite:

S-video-Y:

S-video-C:

1.0 V(p-p)/75 C

For PAL 0.3 V(p-p)/75 C

For NTSC 0.286 V(p-p)/75 C

170 mm M411 mm M451 mm

11.5 kg

Video output level

Composite:

7 Satellite Speakers

1.0 V(p-p)/75 C

S-video-Y:

S-video-C:

1.0 V(p-p)/75 C

Front speakers (SP-THS77F)

Speaker unit: 5.5 cm M2

For PAL 0.3 V(p-p)/75 C

For NTSC 0.286 V(p-p)/75 C

1.0 V(p-p)/75 C

1-way 2-speaker bass-reflex type,

Magnetically Shielded

Component-Y:

Component-P^B/PR:

0.7 V(p-p)/75 C

Power Handling Capacity: 140 W

Impedance:

Frequency Range:

Sound Pressure Level:

Dimensions (W MH MD):

4 C

Tuner section

Tuning Range

FM:

90 Hz to 20 kHz

78 dB/W·m

87.50 MHz to 108.00 MHz

AM (Except for the countries of Middle East):

531 kHz to 1 710 kHz

230 mm M1 104 mm M285 mm

Mass:

3.6 kg

(at 9 kHz intervals)

530 kHz to 1 710 kHz

(at 10 kHz intervals)

AM (For the countries of Middle East):

531 kHz to 1 602 kHz

Center speaker (SP-THS77C)

Speaker unit: 5.5 cm M2

1-way 2-speaker bass-reflex type,

Magnetically Shielded

(at 9 kHz intervals)

530 kHz to 1 600 kHz

(at 10 kHz intervals)

Power Handling Capacity: 140 W

Impedance:

4 C

Frequency Range:

Sound Pressure Level:

Dimensions (W MH MD):

90 Hz to 20 kHz

80 dB/W·m

General

Power Requirements:

AC 110 - 240 V

, 50/60 Hz

220 mm M84 mm M91 mm

Power Consumption:

Dimensions (W MH MD):

Mass:

17 W (at operation)

1.4 W (in standby mode)

Mass:

0.96 kg

Surround speakers (SP-THS77S)

Speaker unit:

5.5 cm M2

435 mm M55 mm M304 mm

1-way 2-speaker bass-reflex type

2.5 kg

Power Handling Capacity: 140 W

Impedance:

4 C

Frequency Range:

Sound Pressure Level:

Dimensions (W MH MD):

90 Hz to 20 kHz

75.5 dB/W·m

230 mm M1 104 mm M285 mm

Mass:

3.5 kg

Designs & specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Mains (AC) Line Instruction

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line voltage

corresponds with the position of the voltage selector switch provided on

the outside of this equipment and, if different, reset the voltage selector

switch, to prevent from a damage or risk of fire/electric shock.

0405TMMMDWJEM

Download from Www.Somanuals.com. All Manuals Search And Download.

Infinity Vacuum Cleaner NV30CN User Manual
Intel Computer Hardware I815E User Manual
JVC CD Player KD G115 User Manual
JVC Flat Panel Television 0807TNH II IM User Manual
JVC Stereo System CA MXDVA9R User Manual
JVC Universal Remote RM RK60P User Manual
JVC VCR BR HD50E User Manual
Karcher Pressure Washer K 3350 User Manual
KEF Audio Speaker System KIT100 User Manual
Kidde Fire Extinguisher 924825 00 User Manual