MICRO COMPONENT SYSTEM
UX-P7R
— Consists of CA-UXP7R and SP-UXP7.
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A
Y
B
A
C
K
STANDBY
/
ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
·
P
7
R
CLOCK
STANDBY
/
ON
CD
/
TAPE
FM/AM
MD/AUX
STANDBY/ON
AHB PRO
VOLUME
SOUND
TIMER
DIMMER DISPLAY
SLEEP
MD/AUX
FM/AM
TAPE
PROG RANDOM REPEAT
SOUND
MODE
AUTO
PRESET FM MODE
CD
CD
REV.MODE
REC
CANCEL
MULTI KEY
SET
DISPLAY
MODE
PTY
/EON
REC
A
U
T
O
R
E
V
E
R
S
E
AHB PRO
LEVEL
PHONES
VOLUME
RM-SUXP7R REMOTE CONTROL
SP-UXP7
CA-UXP7R
SP-UXP7
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GVT0055-008A
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and safety is to be assured.
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equip-
ment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when
making or changing connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
Do be careful with glass panels or doors on equipment.
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way – switch
off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended opera-
tion or has a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is
illegal to watch television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s
approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could
result in a fatal electrical shock.
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
– G-2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
Power sources
• When unplugging from the wall outlet, always pull the
plug, not the AC power cord.
About This Manual
This manual is organized as follows:
• The manual mainly explains operations using the
buttons on the remote control.
DO NOT handle the AC power cord with wet
hands.
You can use the buttons both on the remote control and
on the unit for the same operations if they have the
same or similar names (or marks), unless mentioned
otherwise.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in
each procedure. For instance, we do not repeat the
information about turning on/off the unit, setting the
volume, changing the sound effects, and others, which are
explained in the section “Common Operations” on pages 9
and 10.
Moisture condensation
Moisture may condense on the lens inside the unit in the
following cases:
• After starting heating in the room
• In a damp room
• If the unit is brought directly from a cold to a warm place
Should this occur, the unit may malfunction. In this case,
leave the unit turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
• The following marks are used in this manual:
Gives you warnings and cautions to prevent
from damage or risk of fire/electric shock.
Also gives you information which is not good
for obtaining the best possible performance
from the unit.
Others
• Should any metallic object or liquid fall into the unit,
unplug the unit and consult your dealer before operating
any further.
• If you are not going to operate the unit for an extended
period of time, unplug the AC power cord from the wall
outlet.
Gives you information and hints you had better
know.
DO NOT disassemble the unit since there are no
user serviceable parts inside.
Precautions
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Installation
• Install in a place which is level, dry and neither too hot nor
too cold — between 5˚C (41˚F) and 35˚C (95˚F).
• Install the unit in a location with adequate ventilation to
prevent internal heat built-up in the unit.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Location of the Buttons and Controls ....................... 3 Playing Back CDs (CD/CD-R/CD-RW).................. 14
Front Panel ................................................................. 3
Remote Control .......................................................... 5
Playing Back the Entire CD — Normal Play ........... 14
Basic CD Operations ................................................ 14
Programming the Playing Order of the Tracks
— Program Play ................................................. 15
Playing at Random — Random Play ....................... 16
Repeating Tracks — Repeat Play............................. 16
Prohibiting Disc Ejection — Tray Lock................... 16
Getting Started............................................................ 6
Supplied Accessories.................................................. 6
Putting the Batteries into the Remote Control ........... 6
Connecting Antennas ................................................. 6
Connecting Speakers .................................................. 7
Connecting Other Equipment..................................... 8
Playing Back Tapes ................................................... 17
Playing Back a Tape ................................................. 17
Common Operations .................................................. 9
Recording .................................................................. 18
Turning On the Power ................................................. 9
Setting the Clock ........................................................ 9
Selecting the Sources and Starting Play ....................... 9
Adjusting the Volume ............................................... 10
Selecting the Display Brightness ............................. 10
Reinforcing the Bass Sound ..................................... 10
Selecting the Sound Modes ...................................... 10
Recording on a Tape ................................................. 18
CD Direct Recording ................................................. 19
One Track Recording ................................................ 19
Using the Timers ....................................................... 20
Using Daily Timer and Recording Timer ................. 20
Using Sleep Timer .................................................... 21
Listening to FM and AM (MW/LW) Broadcasts ... 11
Additional Information ............................................ 22
Troubleshooting ........................................................ 22
Maintenance .............................................................. 23
Specifications............................................................. 24
Tuning in a Station ................................................... 11
Presetting Stations .................................................... 11
Tuning in a Preset Station ........................................ 11
Receiving FM Stations with RDS ............................ 12
Changing the RDS Information ............................... 12
Searching for Programs by PTY Codes
(PTY Search) ...................................................... 12
Switching to a Program Type of Your
Choice Temporarily ............................................ 13
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls
Become familiar with the buttons and controls on your unit.
Front Panel
Front Panel
q
w
e
r
1
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A Y
B
A
C
K
t
y
STANDBY / ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
·
P
7 R
2
3
CLOCK
STANDBY ON
/
CD
/
TAPE
FM/AM
MD/AUX
u
AHB PRO
VOLUME
TIMER
SOUND
4
5
6
i
o
7
8
REV.MODE
REC
;
a
s
REC
A U T O R E V E R S E
PHONES
9
p
d
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Display Window
2
1
3
4
[
]
DAILY REC SLEEP REC RDSEON TA NEWS INFO
CLOCK
ALL
BASS SOUND MONOST
PRGM RANDOM
5
6
7
8
9
p
See pages in the parentheses for details.
Front Panel
Display Window
1 Remote sensor
1 Tape operation indicators
• 2 3 (tape direction) and
indicators
2
(STANDBY/ON) button and STANDBY/ON lamp
(9, 16, 21)
(reverse mode)
3 AHB (Active Hyper Bass) PRO + / – control (10)
4 SOUND button (10)
2 Timer indicators
•
(timer), DAILY, REC and SLEEP indicators
5 CD 3/8 (play/pause) button (9, 14, 19)
Pressing this button also turns on the unit.
6 4 (reverse search) button (9, 11, 14, 17, 20)
7 7 (stop) button (14 – 19)
3 REC indicator
4 RDS operation indicators
• RDS, EON, and TA/NEWS/INFO indicators
5 CLOCK indicator
6 CD play mode indicators
• PRGM (program), RANDOM, and repeat (
indicators
7 BASS (Active Hyper Bass) indicator
8 SOUND (sound mode) indicator
9 Tuner operation indicators
• MONO and ST (stereo) indicators
p Main display
8 ¢ (forward search) button (9, 11, 14, 16, 17, 20)
9 PHONES jack (10)
/
ALL)
p Tape operation lamps (17, 18)
• 2 3 (tape direction) and REC lamps
q 0 (disc tray open/close) button (14)
Pressing this button also turns on the unit.
w Disc tray
e TAPE 2 3 button (9, 17, 18)
Pressing this button also turns on the unit.
r FM/AM button (9, 11)
• Shows the source name, frequency, etc.
Pressing this button also turns on the unit.
t Display window
y CLOCK button (9)
u VOLUME + / – control (10)
i TIMER button (20, 21)
o MD/AUX button (9)
Pressing this button also turns on the unit.
; REV.MODE (reverse mode) button (17 – 19)
a Cassette holder
s REC button (18, 19)
d 0 (eject) button for cassette deck (17 – 19)
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control
1 REPEAT button (16)
2 DIMMER button (10)
3 DISPLAY button (9)
4 PROG (program) button (15)
5 RANDOM button (16)
1
2
STANDBY/ON
6 SOUND MODE button (10)
7 AUTO PRESET button (11)
t
y
8 CD 0 (disc tray open/close) button (14)
Pressing this button also turns on the unit.
9 CD 3/8 button (9, 14, 15)
DIMMER DISPLAY
SLEEP
3
4
5
MD/AUX
FM/AM
PROG RANDOM REPEAT
u
i
Pressing this button also turns on the unit.
p 4 (reverse search) button (11 – 14, 17)
q 7 (stop) button (14 – 19)
AUTO
SOUND
MODE
FM MODE
PRESET
6
7
8
9
TAPE
CD
w CANCEL button (15)
o
;
a
e RDS operation buttons (12, 13)
• DISPLAY MODE and PTY/EON buttons
r AHB (Active Hyper Bass) PRO LEVEL + / – buttons (10)
CD
p
q
t
(STANDBY/ON) button (9)
y SLEEP button (21)
CANCEL
MULTI KEY
SET
u MD/AUX button (9)
Pressing this button also turns on the unit.
i FM/AM button (9, 11)
w
e
s
d
DISPLAY
MODE
PTY
/EON
Pressing this button also turns on the unit.
o TAPE 2 3 button (9, 17)
Pressing this button also turns on the unit.
; FM MODE button (11)
AHB PRO
LEVEL
r
a ¢ (forward search) button (11 – 14, 16, 17)
s SET button (11, 15)
f
VOLUME
d MULTI KEY > / < buttons (11, 14 – 16)
f VOLUME + / – buttons (10)
RM-SUXP7R REMOTE CONTROL
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A
Y
B
A
C
K
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
·
P
7
R
CLOCK
CD
TAPE
FM/AM
MD/AUX
AHB PRO
VOLUME
TIMER
REV.MODE
REC
REC
A
U
T
O
R
E
V
E
R
S
E
When using the remote control, point it at
the remote sensor on the front panel.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Getting Started
Supplied Accessories
Connecting Antennas
Make sure that you have all the following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
FM antenna
ANTENNA
• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
FM antenna (supplied)
EXT
AM LOOP
FM 75
OAXIAL
• Speaker cords (2 sets)
If anything is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
1 Attach the FM antenna to the FM 75 Ω
Insert the batteries — R6(SUM-3)/AA(15F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
COAXIAL terminal.
2 Extend the FM antenna.
3 Fasten it up in the position which gives you
the best reception, then fix it on the wall, etc.
1
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
R6(SUM-3)/AA(15F)
2
Outdoor FM antenna
(not supplied)
3
Coaxial cable (not supplied)
ANTENNA
EXT
AM LOOP
FM 75
OAXIAL
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, it will be damaged from
battery leakage.
A 75 Ω antenna with coaxial type connector (DIN 45325)
should be used.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
AM (MW/LW) antenna
Connecting Speakers
2
]
]
1
3
ANTENNA
Vinyl-covered wire
(not supplied)
Gray
Red
1
AM EXT
AM LOOP
RIGHT
RIGHT
LEFT
LEFT
MAIN
SPEAKERS
SUBWOOFERS
SPEAKER
IMPEDANCE
MIN
FM75
SPEAKER
IMPEDANCE
MIN
COAXIAL
6
6
Blue
Black
Speaker cords
Speaker cords
2
AM loop antenna
(supplied)
1 Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
• If the AM loop antenna wire is covered with
vinyl, remove the vinyl by twisting it as
shown in the diagram.
Black
Blue
Black
Blue
Red
Gray
Red
Gray
Right Speaker
Left Speaker
1 Press and hold the clamp of the speaker
2 Turn the AM loop antenna until you have the
terminal on the rear of the unit.
best reception.
2 Insert the end of the speaker cord into the
terminal.
To connect an outdoor AM (MW/LW) antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
Match the polarity of the speaker terminals: Red (+) to
red (+), black (–) to black (–); Gray (+) to gray (+) and
blue (–) to blue (–).
• Remove the vinyl covering the wire by
twisting it as shown in the diagram.
For better reception of both FM and AM (MW/LW)
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
3 Release the finger from the clamp.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the speaker grilles
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
equipment.
The speaker grilles are removed as the illustrations below.
Holes
Projections
Protective plug
OPTICAL
DIGITAL
OUT
Speaker grille
Before connecting the other equipment,
remove the protective plug from the
terminal.
Audio equipment
with an optical digital
input
To optical digital input
To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull towards you. Then pull the
bottom towards you.
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
OPTICAL DIGITAL OUT terminal.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.
Now, you can plug the AC power cord.
Connecting Other Equipment
IMPORTANT: Be sure to check all connections to be done
before plugging the AC power cord into a wall outlet.
You can connect both of the analog and digital equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
OUT
AUX
R
L
IN
To audio output
To audio input
Audio equipment
By using audio cords (not supplied), connect:
• Between the audio input jacks on the other equipment
and AUX OUT jacks: For recording on the other
equipment.
• Between the audio output jacks on the other equipment
and AUX IN jacks: For playing the other equipment.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
Turning On the Power
2 Press ¢ or 4 to adjust
the hour, then press CLOCK.
The minute digits start flashing on the
display.
When you press the play button — CD 3/8, TAPE 2 3, or
the source selecting button — FM/AM, and MD/AUX, the
unit automatically turns on and starts playback if the source is
ready.
CLOCK
CLOCK
To turn on the unit, press
(STANDBY/ON).
The STANDBY/ON lamp lights green.
STANDBY/ON
STANDBY/ON
3 Press ¢ or 4 to adjust
the minute, then press
CLOCK.
STANDBY ON
/
The CLOCK indicator remains lit on the
display.
To turn off the unit (on standby), press
(STANDBY/ON) again.
CLOCK
The STANDBY/ON lamp lights red.
• The CLOCK indicator flashes on the display until you set
the built-in clock. After setting the clock, the clock time
will appear on the display while the power is off.
• A little power is always consumed even while the unit is on
standby.
CLOCK
To check the clock time
DISPLAY
CLOCK
Press DISPLAY on the remote control (or CLOCK
on the unit) while playing any source.
• Each time you press the button, the source
indication and the clock time alternate on the
display.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “0:00” right away, while the tuner preset
stations (see page 11) will be erased in a few days.
• When you unplug the AC power cord or if a power failure occurs,
the clock loses the setting and is reset to “0:00.” You need to set
the clock again.
Setting the Clock
• The clock may gain or lose 1 to 2 minutes per month.
Before operating the unit any further, first set the clock built
in this unit. When you plug the AC power cord into the wall
outlet, the CLOCK indicator starts flashing on the display.
You can set the clock whether the unit is on or off.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
Selecting the Sources and Starting Play
To play back CDs, press CD 3/8. (See pages 14 – 16.)
To play back tapes, press TAPE 2 3. (See page 17.)
To listen to the FM/AM (MW/LW) broadcasts, press FM/
AM. (See pages 11 – 13.)
To select the external equipment as the source, press
MD/AUX.
On the unit ONLY:
CLOCK
1 Press CLOCK for more than 2
seconds.
MD/AUX
FM/AM
TAPE
CD
The hour digits start flashing on the display.
CLOCK
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Volume
Reinforcing the Bass Sound
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOLUME 0”
and “VOLUME40.”
You can reinforce the bass sound to maintain rich, full bass at
low volume. This function only affects the playback sound,
but does not affect your recording.
When using the remote control,
press VOLUME + to increase the
volume or press VOLUME – to
decrease it.
When using the remote control, press
AHB PRO LEVEL + to increase the bass
sound or press AHB PRO LEVEL – to
decrease it.
AHB PRO
LEVEL
VOLUME
When using the unit, turn VOLUME + / –
clockwise (+) to increase the volume or
counterclockwise (–) to decrease it.
When using the unit, turn AHB PRO + / –
clockwise (+) to increase the bass sound or
counterclockwise (–) to decrease it.
VOLUME
AHB PRO
BASS
For private listening
• The bass sound level can be adjusted in 5 steps (“BASS 1”
to “BASS 5”). The BASS indicator also lights up on the
display.
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
To cancel the effect, press AHB PRO LEVEL – on the
remote control (or turn AHB PRO + / – counterclockwise on
the unit) until “BASS 0” appears on the display. The BASS
indicator goes off.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
Selecting the Sound Modes
You can select one of the 4 preset sound modes. This function
only affects the playback sound, but does not affect your
recording.
Selecting the Display Brightness
To select the sound modes, press
SOUND MODE on the remote control (or
SOUND on the unit) until the sound mode you
want appears on the display. The SOUND
indicator also lights up on the display.
SOUND
MODE
You can change the display brightness only while the unit is
turned on.
SOUND
To change the display brightness, press
DIMMER
DIMMER on the remote control.
• Each time you press the button, the display
dims and brightens alternately.
SOUND
• Each time you press the button, the sound modes change as
follows:
ROCK
POP
FLAT
(Canceled)
JAZZ
CLASSIC
ROCK:
POP:
Gives a heavy sound. Boosts low and high
frequency.
Good for vocal music.
CLASSIC: Good for classical music.
JAZZ:
Gives a feeling of live atmosphere. Good for
acoustic music.
FLAT:
The sound mode is canceled. The SOUND
indicator goes off.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM (MW/LW) Broadcasts
Tuning in a Station
3 Repeat steps 1 and 2 to store stations for the
other band.
1 Press FM/AM.
FM/AM
The unit automatically turns on and tunes in
the previously tuned station (either FM or AM
— MW/LW).
When you cannot automatically store stations you want
Stations with weak signals cannot be detected with this automatic
presetting. To store such a station, use the manual presetting.
• Each time you press the button, the band
alternates between FM and AM (MW/LW).
To preset stations manually — Manual Presetting
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
2 Press and hold ¢ or 4
for more than 1 second.
The unit starts searching for stations
and stops when a station of sufficient
signal strength is tuned in.
On the remote control ONLY:
If a program is broadcast in stereo, the ST (stereo)
indicator lights up.
1 Tune in the station you want to preset.
• See “Tuning in a Station.”
To stop searching, press ¢ or 4.
SET
2 Press SET.
When you press ¢ or 4 briefly and repeatedly
The frequency changes step by step.
To change the FM reception mode
MULTI KEY
3 Press MULTI KEY > or
When an FM stereo broadcast is hard to receive
FM MODE
MULTI KEY < to select a preset
number.
or noisy, press FM MODE on the remote control
so that the MONO indicator lights up on the
display. Reception improves.
To restore the stereo effect, press FM MODE again so that
the MONO indicator goes off. In this stereo mode, you can
hear stereo sounds when a program is broadcasted.
SET
4 Press SET again.
Presetting Stations
The tuned station in step 1 is stored in the preset number
selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
You can preset 30 FM and 15 AM (MW/LW) stations —
using either automatic presetting or manual presetting.
In some cases, test frequencies have been already memorized
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
To preset stations automatically
— Automatic Presetting
You need to preset stations separately for the FM and AM
(MW/LW) bands.
Tuning in a Preset Station
On the remote control ONLY:
On the remote control ONLY:
1 Press FM/AM to select the band.
FM/AM
1 Press FM/AM.
FM/AM
• Each time you press the button, the band
alternates between FM and AM (MW/LW).
The unit automatically turns on and tunes in
the previously tuned station (either FM or AM
— MW/LW).
2 Press and hold AUTO PRESET for
AUTO
• Each time you press the button, the band
alternates between FM and AM (MW/LW).
PRESET
more than 2 seconds.
Local stations with strong signals are searched
and stored in memory automatically.
MULTI KEY
2 Press MULTI KEY > or
When automatic presetting is over, the station
stored in preset number 1 is received.
MULTI KEY < to select a preset
number.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Receiving FM Stations with RDS
RDS (Radio Data System) allows FM stations to send an
Searching for Programs by PTY Codes
(PTY Search)
additional signal along with their regular program signals.
For example, the stations send their station names, as well as
information about what type of program they broadcast, such
as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
With the unit, you can receive the following types of RDS
signals.
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
• For details on the PTY codes, see “Additional Information”
on page 22.
To search for a program using the PTY codes
REMEMBER you must preset FM RDS stations to use the
PTY codes. If not yet done, see page 11.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
On the remote control ONLY:
Shows text messages the station sends.
PTY
1 Press PTY/EON until “PTY” and
/EON
EON (Enhanced Other Networks):
Provides the information about the types of the
programs sent by other RDS stations.
“SELECT” alternately appear on
the display.
• Each time you press the button, RDS
operation mode changes as follows:
More about RDS
PTY SELECT
EON SELECT
(See page 13.)
• Some FM stations do not provide RDS signals.
• RDS services vary among FM RDS stations. For details on RDS
services in your area, check with local radio stations.
• RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is weak.
Canceled
2 Press ¢ or 4 until the
PTY code you want appears on
the display.
• Each time you press the button, the
PTY codes change as follows:
Changing the RDS Information
NEWS “ AFFAIRS “ INFO “ SPORT “
EDUCATE “ DRAMA “ CULTURE “
SCIENCE “ VARIED “ POP M “ ROCK M “
EASY M “ LIGHT M “ CLASSICS “
OTHER M “ WEATHER “ FINANCE “
CHILDREN “ SOCIAL “ RELIGION “
PHONE IN “ TRAVEL “ LEISURE “ JAZZ “
COUNTRY “ NATION M “ OLDIES “
FOLK M “ DOCUMENT “ TRAFFIC “
(back to the beginning)
You can see RDS information on the display while listening
to an FM station.
On the remote control ONLY:
Press DISPLAY MODE.
DISPLAY
MODE
• Each time you press the button, the display
changes to show the following information:
PS
PTY
RT
(Radio Text)
(Program Service) (Program Type)
Station frequency
(or preset channel no.)
PTY
3 Press PTY/EON once again.
/EON
While searching, “SEARCH” and the selected
PTY code alternately appear on the display.
The unit searches 30 preset FM stations, stops
when it finds the one you have selected (“FOUND”
appears), and tunes in that station.
• If no program is found, “NOTFOUND” appears on the
display and the unit returns to the last received station.
• If no PS, PTY, or RT signals are sent by a station
“NO PS,” “NO PTY,” or “NO RT” appears on the display.
• On the characters displayed
When the display shows PS, PTY or RT signals:
– The display shows upper case letters only.
– The display cannot show accented letters; For example, “A”
may represent accented “A’s” like “Á, Â, Ã, À, Ä and Å.”
To stop searching any time during the process
Press PTY/EON while searching.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching to a Program Type of Your Choice
Temporarily
How the EON function actually works:
CASE 1
By receiving EON (Enhanced Other Networks) data sent by
FM RDS stations, the EON function allows the unit to switch
temporarily to a broadcast program of your choice (TA,
NEWS, and INFO) from a different station.
• The EON function only works when you are listening to a
preset FM RDS stations providing EON data.
• The EON indicator lights while receiving a station with the
EON data.
If there is no station broadcasting the program you
have selected
The unit continues tuning in the current station.
«
When a station starts broadcasting the program you have
selected, the unit automatically switches to the station. The
indicator of received PTY code starts flashing.
«
When the program is over, “EON END” appears on the
display, and the unit goes back to the previously tuned
station, but the EON function still remains activated.
To activate the EON function
REMEMBER you must preset FM RDS stations to use the
EON function. If not yet done, see page 11.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
CASE 2
If there is a station broadcasting the program you have
selected
The unit tunes in the program. The indicator of received
PTY code starts flashing.
On the remote control ONLY:
PTY
/EON
1 Press PTY/EON until “EON” and
«
“SELECT” alternately appear on
the display.
When the program is over, “EON END” appears on the
display, and the unit goes back to the previously tuned
station, but the EON function still remains activated.
• Each time you press the button, RDS operation mode
changes as follows:
CASE 3
PTY SELECT
(See page 12.)
EON SELECT
If the FM station you are listening to is broadcasting
the program you have selected
Canceled
The unit continues to receive the station but the indicator
of received PTY code starts flashing.
«
When the program is over, “EON END” appears on the
display, and the indicator of received PTY code stops
flashing and remains lit, but the EON function still
remains activated.
2 Press ¢ or 4 until the
EON data type you want
appears on the display.
The selected EON data type indicator
also flashes.
RDSEON TA
More about the EON function
• Each time you press the button, the EON data types
change as follows:
• The EON data sent from some stations may not be compatible
with this unit. In this case, the EON function may not work
correctly.
TA
NEWS
INFO
• While listening to a program tuned in by the EON function, the
station does not change even if another network station starts
broadcasting a program of the same EON data.
• The EON function is canceled when you change the source to CD,
TAPE, or MD/AUX, while it is temporarily canceled when you
change the source to AM (MW/LW).
OFF
(Canceled)
TA:
NEWS: News
Traffic announcement
INFO: Program the purpose of which is to impart advice
in the widest sense.
OFF: The EON function is canceled. The EON data
type indicator (TA, NEWS, INFO) goes off.
PTY
3 Press PTY/EON once again.
/EON
The EON data type indicator stops flashing
and remains lit.
Now, the EON function is activated. See
“How the EON function actually works.”
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Playing Back CDs (CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
• CD
• CD-R
• CD-RW
3 Press CD 3/8.
CD
The disc tray automatically closes and the first
track of the CD starts playing.
Continued use of irregular shape CDs
(heart-shape, octagonal, etc.) can damage the
unit.
Track number
Elapsed playing time
• The CD automatically stops when the last track of the
CD has finished playing.
General Notes
To stop playing, press 7.
In general, you will have the best performance by keeping
your CDs and the mechanism clean.
• Store CDs in their cases, and keep them in cabinets or on
shelves.
Total track number
Total playing time
• Keep the unit’s disc tray closed when not in use.
To remove the disc, press CD 0 on the remote control (or 0
on the CD player section).
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized.”
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not be
played back depending on their characteristics or recording
conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is
caused by the fact that the reflectance of CD-RWs is lower
than for regular CDs.)
• If the CD cannot be read correctly (because it is scratched, for
example)
“00 0000” appears on the display.
• If no CD is inserted
“NO DISC” appears on the display.
• If an unreadable CD-R or CD-RW is inserted
“BLANK CD” appears on the display.
DO NOT try to open or close the CD tray by hand
as it will be damaged.
Basic CD Operations
Playing Back the Entire CD — Normal Play
While playing a CD, you can do the following operations.
CD
To stop playing for a moment
1 Press CD 0 on the remote control
Press CD 3/8.
(or 0 on the CD player section).
The unit automatically turns on and the disc
tray comes out.
CD
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3/8 again.
To go to another track
2 Place a disc correctly on the circle of the disc
MULTI KEY
Press MULTI KEY > / MULTI KEY < or
tray, with its label side up.
¢ / 4 repeatedly before or during
playback.
• MULTI KEY > or ¢ :
Skips to the beginning of the
next or succeeding tracks.
• MULTI KEY < or 4 :
Goes back to the beginning of
the current or previous tracks.
INCORRECT
CORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
To locate a particular point in a track
During play, press and hold ¢ or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the program contents
You can check the program contents by
pressing PROG on the remote control.
The programed tracks are shown in the
programed order.
Programming the Playing Order of the Tracks
— Program Play
PROG
You can arrange the order in which tracks play before you
start playing. You can program up to 20 tracks.
To modify the program
1 Load a CD.
CANCEL
Before or after playing, you can erase the last
programed track by pressing CANCEL on the
remote control.
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
• Each time you press the button, the last programed track is
erased from the program.
2 Press PROG (program).
PROG
The PRGM (program) indicator lights up
on the display.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
PRGM
• If a program has been stored in memory, the program is
called up.
• If you try to program the 21st track
“FULL” will appear on the display.
• If the total playing time is 100 minutes or more
The total playing time will not be shown. “– –:– –” will appear.
3 Press MULTI KEY > or MULTI KEY < to
select the track number, then press SET.
MULTI KEY
SET
PRGM
Track number
Program step number
4 Repeat step 3 to program other tracks you
want.
5 Press CD 3/8.
CD
The tracks are played in the order you have
programed.
To stop playing, press 7.
To exit from Program play mode, press 7 before or after
playing. The PRGM (program) indicator goes off. All the
programed tracks will be cleared.
• Disc ejection also erases the program.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing at Random — Random Play
Prohibiting Disc Ejection — Tray Lock
The tracks will play in no particular order when you use this
mode.
You can lock the disc tray and prohibit to eject the CD.
• This is possible only while the unit is turned on.
On the remote control ONLY:
To use Random play mode, press RANDOM
On the unit ONLY:
To prohibit disc ejection, press
RANDOM
before or during playing.
The RANDOM indicator lights up on the display.
(STANDBY/ON) while holding 7. (If the
disc tray is opened, close it first.)
“LOCKED” appears for a while, and the
disc tray is locked.
STANDBY ON
/
RANDOM
The tracks are played at random.
Random play ends when all the tracks are played once.
To cancel the prohibition and unlock the
CD, press
holding 7.
(STANDBY/ON) while
To skip the current track, press ¢ or MULTI KEY >.
• You cannot go back to the previous track by pressing 4
or MULTI KEY <.
“UNLOCKED” appears for a while, and the
disc tray is unlocked.
STANDBY ON
/
To stop playing, press 7.
• Random play mode is also canceled.
To exit from Random play mode, press RANDOM again
before or during playing. Random play mode is canceled and
Normal play resumes.
If you try to eject the CD,
“LOCKED” appears to inform you that the disc tray is locked.
Repeating Tracks — Repeat Play
You can have all the tracks, the program or individual track
currently playing to repeat as many times as you like.
On the remote control ONLY:
To repeat playing, press REPEAT before or
REPEAT
during playing.
• Each time you press the button, Repeat play
mode changes as follows, and the following indicator lights
up on the display:
ALL
Canceled
: Repeats one track.
: In Normal play mode, repeat all the tracks.
In Program play mode, repeat all the tracks in the
program.
ALL
In Random play mode, repeats all the tracks in
random order.
To stop playing, press 7.
To cancel Repeat play, press REPEAT repeatedly until the
repeat indicator goes off from the display.
• In Random play
cannot be selected. If
is selected
when you press RANDOM, it is canceled (goes off).
• Repeat mode remains in effect even when you change the
play mode.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Tapes
You can play back type I, type II, and type IV tapes without
changing any settings.
To stop playing, press 7.
To fast-wind to the left or to the right, press ¢ or 4
while the tape is not running.
The tape direction indicator (3 or 2) starts flashing quickly
on the display.
Playing Back a Tape
To remove the cassette, press 0 for cassette deck.
1 Press 0 for cassette deck.
To play both sides — Reverse Mode
You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.
Press REV.MODE on the unit.
REV.MODE
• Each time you press the button, reverse mode
changes as follows:
2 Put a cassette in with the exposed part of the
tape down.
:
The deck automatically stops after playing both
sides of the tape. (Stops when playback in the
2 direction is finished.)
:
:
The deck continues to play both sides of the
tape until 7 is pressed.
The deck automatically stops after playing one
side of the tape.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
3 Close the cassette holder gently.
4 Press TAPE 2 3.
TAPE
The unit automatically turns on and the tape
play starts. The tape direction indicator
(3 or 2) flashes slowly on the display.
• Each time you press the button, the tape direction
changes.
3 : plays the front side.
2 : plays the reverse side.
The tape direction lamp on the unit starts flashing to
indicate the tape running direction.
REC
When the tape plays to the end, the deck automatically
stops if the reverse mode is set to
play both sides — Reverse Mode.”)
or
. (See “To
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Recording
IMPORTANT:
Recording on a Tape
• It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable programme and in any
literary, dramatic, musical, or artistic embodied
therein.
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
• The recording level is automatically set correctly, so it is
not affected by the VOLUME, AHB (Active Hyper Bass)
PRO, and SOUND MODE settings. Thus, during recording
you can adjust the sound you are actually listening to
without affecting the recording level.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• You can use type I tape for recording.
2 Close the cassette holder gently.
• If you want to record on both sides of a tape, see “To
record on both sides — Reverse Mode.”
To protect your recording
Cassettes have two small
tabs on the back to protect
from unexpected erasure or
re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
3 Check the recording direction for the tape.
• If the tape direction is not correct, press TAPE 2 3
twice then 7 to change the tape direction.
4 Start playing the source — FM, AM or
auxiliary equipment connected to AUX jacks.
• When the source is CD, see “CD Direct Recording” on
page 19.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
REC
5 Press REC.
The REC indicator lights up on the display and
recording starts.
• Incomplete erasure
• Difficulty in recording
The REC lamp on the unit also lights red.
REC
To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.
To stop recording, press 7.
Capstans
To remove the cassette, press 0 for cassette deck.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until the
REV.MODE
indicator is lit.
Heads
• When using the reverse mode for recording,
start recording in the forward (3) direction first.
Otherwise, recording will stop when recording is done only
on one side (reverse) of the tape.
Pinch rollers
To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when
recording CDs or radio broadcasts, wind the leader tape first to
ensure that the recording will be made without any music part lost.
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Direct Recording
One Track Recording
Everything on the CD goes onto the tape in the order it is on
the CD, or according to the order you have made for Program
play.
This recording method is convenient when you record tracks
while playing a CD. You can only record your favorite songs
on the tape.
On the unit ONLY:
On the unit ONLY:
1 Put a recordable cassette in with the exposed 1 Put a recordable cassette in with the exposed
part of the tape down. part of the tape down.
2 Place a disc correctly on the circle of the disc 2 Play the track on the CD you wish to record.
tray, with its label side up.
REC
3 Press REC.
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
• If you want to record on both sides of a tape, see “To
record on both sides — Reverse Mode.”
• If you do not want pauses of about 4 seconds recorded
between selections, press CD 3/8 twice. If nothing is
done, non-recorded pause will be automatically
recorded between selections.
The CD player returns to the beginning of that
track and the track is recorded on the tape.
After recording, the CD player and cassette deck
automatically stop.
4 Repeat steps 2 and 3 to record other tracks
you want.
REC
3 Press REC.
The REC indicator lights up on the display and
recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop CD Direct Recording, press 7. The tape stops after
4 seconds.
To remove the cassette, press 0 for the cassette deck.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until
REV.MODE
the
indicator is lit.
• When using the reverse mode for CD Direct
Recording, start recording in the forward (3) direction
first. When the tape reaches its end while recording a song
in the forward direction (3), the last song will be re-
recorded at the beginning of the reverse side (2).
If you start recording on the reverse side (2), recording
will stop when recording is done only on one side (reverse)
of the tape.
When making SLEEP timer settings while doing CD
Direct recording
Set enough time to allow for the CD to finish playing; otherwise the
power will go off before recording is completed.
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Using the Timers
There are three timers available — Daily Timer, Recording
Timer and Sleep Timer.
2 Set the on-time you want the
unit to turn on at.
Before using the timers, you need to set the clock built in the
unit (see page 9). When you press TIMER on the unit for
more than 3 seconds, the display alternates between
“ADJUST” and “CLOCK” for about 5 seconds.
1) Press ¢ or 4 to set the hour,
then press TIMER.
2) Press ¢ or 4 to set the minute, then
press TIMER.
TIMER
The unit enters off-time setting mode.
[
]
DAILY
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
When the on-time comes, the unit automatically turns on
(the indicator flashes just before the on-time, and continues
flashing while the timer is operating). Then, when the off-
time comes, the unit automatically turns off (on standby).
The timer setting remains in memory until you change it.
3 Set the off-time you want the
unit to turn off (on standby)
at.
1) Press ¢ or 4 to set the hour, then press
TIMER
TIMER.
2) Press ¢ or 4 to set the minute, then
press TIMER.
• When the DAILY indicator is lit on the display, the timer
acts as the Daily Timer. Once the Daily Timer has been set,
it will be activated at the same time everyday until the timer
is turned off.
• When the REC indicator is lit on the display, the timer acts
as the Recording Timer. After the Recording Timer has
been performed, the details of the setting remain stored but
the timer is turned off.
The unit enters source selecting mode.
4 Press ¢ or 4 to select
the timer mode (Daily Timer
or Recording Timer) and the
source to play, then press TIMER.
• Each time you press ¢ or 4, the timer
mode and the source change as follows:
TIMER
Before you start...
When using TUNER” as the source to play, make sure to
“
select the desired station before turning off the power.
DAILY
REC
TUNER
DAILY TAPE
TUNER
DAILY
CD
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
DAILY TUNER: tunes into the last station you were
listening to. (Daily Timer)
REC TUNER: records the last station you were listening
to. (Recording Timer)
On the unit ONLY:
1 Press and hold TIMER for more
TIMER
• Put a recordable cassette into the deck.
DAILY CD:
plays a CD. (Daily Timer)
DAILY TAPE: plays a tape. (Daily Timer)
• Make sure that the tape direction is
than 3 seconds.
The timer ( ) indicator lights up, and the
timer mode indicator (DAILY or REC) and
the current on-time flash on the display.
The unit enters on-time setting mode.
correct.
5 Press ¢ or 4 to set the
volume level.
[
]
DAILY
• You can select the volume level
(“VOLUME 0” to “VOLUME40” and “VOLUME –”).
If you select “VOLUME –,” the volume is set to the last
level when the unit has been turned off.
To turn off the volume while the Recording Timer
(
REC TUNER) is working, set the volume level
“VOLUME 0.”
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER
Using Sleep Timer
6 Press TIMER to complete the timer
setting.
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
7 Press
(STANDBY/ON) to turn
off the unit (on standby) if you have
set the timer with the unit turned
on.
STANDBY ON
/
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
• When the timer turns on the unit, the timer (
)
indicator and the selected timer mode indicator (DAILY
or REC) start flashing.
On the remote control ONLY:
SLEEP
1 Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator lights up on the display.
• Each time you press the button, the time length changes
as follows:
To cancel the setting, press and hold TIMER until the timer
(
) indicator goes off from the display.
10
20
30
60
90
120
Canceled
• If the unit is turned on when the timer-on time comes
Timer does not work.
• When you unplug the AC power cord or if a power failure
occurs
The timer will be canceled. You need to set the clock first, then
the timer again.
2 Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source
Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Description of the PTY codes:
CHILDREN: Programs targeted at a young audience.
SOCIAL:
Programs about sociology, history, geography,
psychology and society.
NEWS:
News.
AFFAIRS:
Topical program expanding or enlarging upon the
news — debate, or analysis.
RELIGION: Religious programs.
PHONE IN: Involving members of the public expressing their
INFO:
Program the purpose of which is to impart advice in
the widest sense.
views either by phone or at a public forum.
TRAVEL:
LEISURE:
JAZZ:
Travel information.
SPORT:
Program concerned with any aspect of sports.
Programs about recreational activities.
Jazz music.
EDUCATE: Educational programs.
DRAMA: All radio plays and serials.
COUNTRY: Songs which originate from, or continue the musical
CULTURE: Programs concerning any aspect of national or
tradition of the American Southern States.
regional culture, including language, theater, etc.
NATION M: Current popular music of the nation or region in that
SCIENCE:
VARIED:
Programs about natural sciences and technology.
country’s language.
Used for mainly speech-based programs such as
quizzes, panel games and personality interviews.
OLDIES:
FOLK M:
Music from the so-called “golden age” of popular
music.
POP M:
Commercial music of current popular appeal.
Rock music.
Music which has its roots in the musical culture of a
particular nation.
ROCK M:
EASY M:
Current contemporary music considered to be “easy-
listening.”
DOCUMENT:Program concerning factual matters, presented in an
investigative style.
LIGHT M:
Instrumental music, and vocal or choral works.
TRAFFIC:
Traffic announcement.
CLASSICS: Performances of major orchestral works,
symphonies, chamber music, etc.
OTHER M: Music not fitting into any of the other categories.
WEATHER: Weather reports and forecasts.
Classification of the PTY codes for some FM stations
may be different from the above list.
FINANCE: Stock Market reports, commerce, trading etc.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.
Symptom
No sound is heard.
Cause
Action
• Connections are incorrect or loose.
• Check all connections and make
corrections. (See pages 6 to 8.)
• Disconnect the headphones.
• Headphones are connected.
• Antennas are disconnected.
Hard to listen to broadcasts because of
noise.
• Reconnect the antennas correctly and
securely.
• The AM loop antenna is too close to the
unit.
• Change the position and direction of the
AM loop antenna.
• The FM antenna is not properly extended
and positioned.
• Extend the FM antenna at the best
position.
The disc tray does not open or close.
The disc does not play.
The AC power cord is not plugged in.
The disc is placed upside down.
The disc is scratched or dirty.
Plug the AC power cord.
Place the disc with the label side up.
Clean or replace the disc. (See page 23.)
Turn on the unit.
The disc sound is discontinuous.
The cassette holder cannot be opened.
Power supply from the AC power cord has
been cut off while the tape was running.
Impossible to record.
Small tabs on the back of the cassette are
removed.
Cover the holes with adhesive tape.
Operations are disabled.
The built-in microprocessor may
malfunction due to external electrical
interference.
Unplug the AC power cord and then plug it
back in.
Unable to operate the unit from the remote
control.
• The path between the remote control and
the remote sensor on the unit is blocked.
• The batteries are exhausted.
• Remove the obstruction.
• Replace the batteries.
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Handling discs
Cleaning the unit
• Remove the disc from its case by
holding it at the edge while pressing the
center hole lightly.
• Do not touch the shiny surface of the
disc, or bend the disc.
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily
stained, wipe it with a cloth soaked in water-diluted neutral
detergent and wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
followings.
• Put the disc back in its case after use to
prevent warping.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substance such as
insecticides to it.
• Be careful not to scratch the surface of
the disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
— DO NOT allow any rubber or plastic to remain in
contact with it for a long time.
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the disc.
Handling cassette tapes
• If the tape is loose in its cassette, take
up the slack by inserting a pencil in one
of the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the
tape:
— In dusty places
— In direct sunlight or heat
— In moist areas
— On a TV or speaker
— Near a magnet
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Design and specifications are
subject to change without notice.
Specifications
UX-P7R (CA-UXP7R and SP-UXP7)
Amplifier
Cassette deck
Output Power
Frequency response
Normal (type I):
Wow and flutter
SUBWOOFERS:
50 Hz – 14 000 Hz
0.15 % (WRMS)
110 W (55 W + 55 W) at 6 Ω (MAX.)
70 W (35 W + 35 W) at 6 Ω (10 % THD)
MAIN SPEAKERS:
General
Power requirement
Power consumption
36 W (18 W + 18 W) at 6 Ω (MAX.)
30 W (15 W + 15 W) at 6 Ω (10 % THD)
Audio input sensitivity/Impedance (at 1 kHz)
AC 230 V
, 50 Hz
90 W (at operation)
1.2 W (on standby)
AUX:
Audio output level
AUX:
Digital output — OPTICAL DIGITAL OUT
Signal wave length: 660 nm
400 mV/48 kΩ
Dimensions (approx.)
Mass (approx.)
525 mm x 305 mm x 249 mm (W/H/D)
(20 7/8 in. x 12 1/16 in. x 9 7/16 in.)
12.7 kg (28.1 lbs)
260 mV/5.8 kΩ
Supplied Accessories
Output level:
Speakers/Impedance
–21 dBm to –15 dBm
6 Ω – 16 Ω
See page 6.
Speaker
Tuner
Speaker units
Subwoofer 13.5 cm (5 3/8 in.) cone x 1
Woofer 8.0 cm (3 3/16 in.) cone x 1
Tweeter 2.0 cm (13/16 in.) cone x 1
FM tuning range
AM tuning range
MW:
87.50 MHz – 108.00 MHz
522 kHz – 1 629 kHz
144 kHz – 288 kHz
Impedance
LW:
Subwoofer:
Main speaker:
Dimensions (approx.)
6 Ω
6 Ω
CD player
Dynamic range
Signal-to-noise ratio
Wow and flutter
170 mm x 305 mm x 253 mm (W/H/D)
(6 3/4 in. x 12 1/16 in. x 10 in.)
3.5 kg (7.8 lbs)
85 dB
90 dB
Immeasurable
Mass (approx.)
– 24 –
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
0301MWMMDWJEM
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|