COLOR VIDEO MONITOR
INSTRUCTIONS
BM-H1900SU
BM-H1310SU
For Customer Use:
Enter below the Model No. and
Serial No. which is located on the
rear of the cabinet. Retain this
information for future reference.
UNDER PULSE COLOR BLUE MEMORY
MENU
DEGAUSS
SCAN CROSS
OFF
CHECK MODE
VOLUME
PHASE CHROMA BRIGHT CONTRAST
POWER
VIDEO
Model No.
Serial No.
RGB/
EXT
SYNC
Y/C
A
B
COMPO(SDI)
ON
OFF
ENTER
INPUT SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing this JVC color video monitor.Before using it, read and follow all
instructions carefully to take fullest advantage of the monitor's performance.
CONTENTS
SAFETY PRECAUTIONS ----------------------------------- 2
FEATURES ------------------------------------------------------ 3
CONTROLS AND FEATURES (FRONT) --------------- 4
TERMINALS AND FEATURES (REAR) ---------------- 5
CONNECTION EXAMPLE ---------------------------------- 6
External/internal synchronization------------------------- 6
RGB/COMPO(SDI) terminal setting --------------------- 6
BASIC OPERATION ------------------------------------------ 7
To demagnetize the picture tube ------------------------- 7
PICTURE ADJUSTMENTS --------------------------------- 8
CONTRAST (picture contrast) ---------------------------- 8
BRIGHT (picture brightness) ------------------------------ 8
CHROMA (picture color density) ------------------------- 8
PHASE (picture hue) ---------------------------------------- 8
MEMORY MODE--------------------------------------------- 12
Recall/release of memory mode------------------------ 12
Setting programming of the picture being monitored ----- 12
Revision of memory mode ------------------------------- 12
SET-UP FOR MONITOR INSTALLATION------------ 14
To call up SET-UP MENU and select a function --- 14
SIZE/CENTERING (size/positioning adjustments of RGB signal pictures) -- 14
WHITE BALANCE ADJUST (white balance adjustments) -- 15
REMOTE SELECT (TALLY/REMOTE-terminal settings)---- 15
STATUS DISPLAY (setting the status display to on/off) -- 16
CONTROL LOCK (deactivation of front-control functions) -- 16
PICTURE SETTING INITIALIZATION ---------------- 17
To initialize MENU settings only ------------------------ 17
To initialize both MENU/SET-UP MENU settings-- 17
REMOTE CONTROLS ------------------------------------- 18
On-screen menu remote operation -------------------- 18
Picture adjustments ---------------------------------------- 18
Sound adjustments----------------------------------------- 18
EACH REMOTE CONTROL OF PLURAL MONITORS -- 19
To program an ID number-------------------------------- 19
To call up an ID number ---------------------------------- 19
To assign a monitor ---------------------------------------- 19
BEFORE CALLING FOR SERVICE -------------------- 20
MENU DISPLAY CHART ---------------------------------- 21
SPECIFICATIONS ------------------------------------------- 22
Relation between picture adjustments and input video signals ---
8
VIDEO SIGNAL CONTROLS------------------------------- 9
UNDER SCAN------------------------------------------------- 9
PULSE CROSS ----------------------------------------------- 9
COLOR OFF --------------------------------------------------- 9
BLUE CHECK ------------------------------------------------- 9
ON-SCREEN MENU CONTROLS ---------------------- 10
Calling up the menu display, selecting an item----- 10
ASPECT RATIO (picture aspect ratio switching) -- 10
FILTER SELECT (built-in filter selection) ------------ 10
PEAKING FREQ./PEAKING LEVEL (picture quality improvement) ------ 11
AFC (switching of time constant for the AFC) ------ 11
COLOR TEMP. (color temperature switching) ----- 11
NTSC SETUP (NTSC set-up level) -------------------- 11
COMPO. LEVEL (chrominance level setting)------- 11
FEATURES
■ For multiple applications with various video systems; equipped with external source
component terminals that can be bridge-connected.
■ Compatible with NTSC-3.58/4.43 MHz or PAL color systems.
■ The BM-H1900SU has a medium-high-definition picture tube that reproduces pictures
with a horizontal resolution of 750 TV lines or more .
The BM-H1310SU has a high-definition picture tube that reproduces pictures with a
horizontal resolution of 750 TV lines or more .
■ Auto white-balance stabilizer (I/K feedback circuit) maintains stable color reproduction
over long-term use.
■ A range of flexible functions includes picture aspect ratio switching (between 4:3 and
16:9), memory mode and control lock.
■ Optional exclusive wireless remote control unit enables individual operation and adjust-
ment of up to 99-unit monitors.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FEATURES (FRONT)
[ BM-H1900SU ]
4 5 6 7 8 9 p q w e
(Front)
u
i
1
COLOR
OFF
BLUE MEMORY
CHECK MODE
PULSE
CROSS
UNDER
SCAN
MENU
DEGAUSS
CONTRAST
BRIGHT
PHASE
CHROMA
VOLUME
POWER
VIDEO
RGB/
COMPO(SDI)
EXT
Y/C
B
SYNC
A
ON
OFF
ENTER
INPUT SELECT
3
r
t
y
o
[ BM-H1310SU ]
4 5 6 7 8 9 p q w e
2
u
i
COLOR
OFF
BLUE MEMORY
CHECK MODE
PULSE
CROSS
UNDER
SCAN
MENU
DEGAUSS
CONTRAST
BRIGHT
PHASE
CHROMA
VOLUME
POWER
VIDEO
RGB/
COMPO(SDI)
EXT
Y/C
B
SYNC
A
ON
OFF
ENTER
INPUT SELECT
3
r
t
y
o
1 Tally lamp
q COLOR OFF switch
Glows to indicate when a tally signal is input to the
TALLY/REMOTE terminal on the rear panel. (For
terminal connection, see page 15.)
Push to eliminate color signals and display a black-and-
white picture.
w BLUE CHECK switch
Push to eliminate red and green color signals and
display a monochrome blue picture.
e MEMORY MODE switch
Push to adjust the picture by recalling the adjustment
data that you stored in memory.
2 Speaker
3 Remote control sensor
Senses infrared signals emitted from the optional
wireless remote control.
4 VOLUME control
Turn to adjust speaker volume.
r INPUT SELECT switches
Push to select a rear terminal video signal input.
t EXT SYNC switch
5 PHASE control
Turn to adjust picture hue, using natural skin color as a
reference.
Push to synchronize the monitor with an external sync
signal. This function is effective regardless of signal
input.
6 CHROMA control
Turn to adjust picture color density according to your
requirements.
y MENU controls
Use to operate on-screen menu functions.
7 BRIGHT control
Turn to adjust picture brightness according to your
u DEGAUSS switch
requirements.
Push to demagnetize the picture tube.
i POWER switch
8 CONTRAST control
Turn to adjust the picture contrast according to your
requirements.
Press to turn the power on or off.
o POWER indicator
9 UNDER SCAN switch
Push to display the whole picture on screen by reducing
display area dimensions.
Glows to indicate that power is on.
p PULSE CROSS switch
Push to check the retrace period (sync signal) by
delaying input signal phase.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMINALS AND FEATURES (REAR)
(Rear)
2 3
8 9
w
AUDIO
OUT
IN
OUT
IN
IN
OUT
VIDEO
VIDEO
A
Y / C
OPEN
75 ¶
OPEN
75 ¶
B
RGB/COMPO(SDI)
G / Y
OPEN
75 ¶
4
5
OPEN
OPEN
75 ¶
e
r
SYNC
B / B-Y
R / R-Y
75 ¶
OPEN
OPEN
75 ¶
75 ¶
TALLY/
REMOTE
7
6
FOCUS
1
p
q
t
y
1 Power socket
q RGB/COMPO(SDI) termination switch
Functions as for 3.
Connect to an AC outlet (120 V AC, 50 Hz / 60 Hz) using
the provided power cord.
w AUDIO A terminals
2 VIDEO A terminals
Audio signal input terminal and bridge-connected output
terminal. Linked with the VIDEO A terminals so that
AUDIO A terminals and VIDEO A terminals are selected
simultaneously.
Composite video signal input terminal and bridge-
connected output terminal.
3 VIDEO A termination switch
Set to OPEN for bridged connection; set to 75 Ω for
input signal only.
e AUDIO B terminals
Audio signal input terminal and bridge-connected output
terminal. Linked with the VIDEO B or Y/C terminals so
that AUDIO B terminals and VIDEO B or Y/C terminals
are selected simultaneously.
4 VIDEO B terminals
Composite video signal input terminal and bridge-
connected output terminal.
r AUDIO RGB/COMPO(SDI) terminals
Audio signal input terminal and bridge-connected output
terminal. Linked with the RGB/COMPO(SDI) terminals
so that AUDIO RGB/COMPO(SDI) terminals and RGB/
COMPO(SDI) terminals are selected simultaneously.
t FOCUS control
5 VIDEO B termination switch
Functions as for 3.
6 SYNC terminals
External sync signal input terminal and bridge-connected
output terminal. Input an external composite sync signal
to these terminals when inputting a video signal without
a sync signal, or when synchronizing the monitor with an
external sync signal.
Adjustment hole exclusively for use by service
personnel. Make sure to consult qualified service
personnel for adjustment.
7 SYNC termination switch
Functions as for 3.
y TALLY/REMOTE terminal
External input terminal of a tally signal to make the tally
lamp glow, or of a remote-control signal to switch input
or picture control.
8 Y/C terminals
Input terminal of Y/C signals and bridge-connected
output terminal.
9 Y/C termination switch
Functions as for 3.
p RGB/COMPO(SDI) terminals
Input terminal of analog RGB signals or Y/B-Y/R-Y
signals and bridge-connected output terminal. For
analog RGB signals, also accepts a G signal including a
sync signal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION EXAMPLE
●Be sure to turn off each component’s power before connection.
NOTE
●The connection shown below is only an example. Terminals and their functions differ in accordance with a component to
be connected. Also read and follow the instructions for the component.
For audio signal input from the
Component that outputs a
composite video signal
Component that outputs a
composite video signal
Component that outputs Y/C signals
component connected to VIDEO A IN
2
4
8
~
!
3
1
7
For bridge-connected output of ~
AUDIO
OUT
IN
OUT
IN
IN
OUT
VIDEO
A
Y / C
For audio signal input from the
component connected to VIDEO B
IN or Y/C IN
OPEN
75 ¶
OPEN
75 ¶
@
VIDEO
OPEN
B
RGB/COMPO(SDI)
G / Y
OPEN
75 ¶
75 ¶
For bridge-connected output of @
#
%
SYNC
Component that outputs
a sync signal
5
B / B-Y
R / R-Y
OPEN
75 ¶
OPEN
OPEN
75 ¶
75 ¶
For bridge-connected output of $
TALLY/
REMOTE
FOCUS
6
For audio signal input from the
component connected to
RGB/COMPO(SDI) IN
$
9
Component that outputs
0
Component that outputs
=
Remote control
-
component
analog RGB signals
a component signal
Signal(s)
Terminal
VIDEO A IN
VIDEO A OUT
VIDEO B IN
VIDEO B OUT
SYNC IN
Function
1
2
3
4
5
6
7
8
9
0
-
=
Composite video
Composite video
Composite video
Composite video
Composite sync
Composite sync
Y/C
Input of a composite video signal
Bridge-connected output of 1
Input of a composite video signal
Bridge-connected output of 3
Input of an external sync signal
Bridge-connected output of 5
Input of Y/C signals
SYNC OUT
Y/C IN
Y/C
Y/C ONT
Bridge-connected output of 7
Input of analogue RGB signals
Input of a component signal
Analogue RGB
Component
RGB/COMPO(SDI) IN
RGB/COMPO(SDI) IN
Analogue RGB or component
Tally/remote control
RGB/COMPO(SDI) OUT Bridge-connected output of 9 or 0
TALLY/REMOTE Input of a tally signal or remote control signal
External/internal synchronization
Push the front panel EXT SYNC switch to ON, and the monitor oper-
ates to synchronize with an external sync signal input to the rear panel
SYNC IN terminal.
Push the switch again to OFF, and the monitor operates to synchro-
nize with a sync signal included in a video signal (if it includes a sync
signal) input via a video input terminal.
qMENU r
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
RGB/COMPO(SDI) terminal setting
ASPECT RAT IO
F I LTER SELECT
PEAK ING FREQ.
PEAK ING LEVEL
AFC
Set RGB or COMPO. on screen to match the type of video signal
input to the rear panel RGB/COMPO(SDI) IN terminals.
To input analog RGB signals, set to RGB.
COLOR TEMP.
To input Y, B-Y or R-Y signal, set to COMPO.
Operation:
NTSC
SETUP
:7.5
COMPO. LEVEL
:BETA75
qMEMORY MODE r
RGB /COMPO(SDI)
ENTER
:RGB
:
1. Press the front panel MENU button to call up the MENU display on screen.
2. Press the ▲ or ▼ button to select RGB/COMPO(SDI).
3. Press the or
button to set RGB or COMPO..
4. Press the MENU button to complete.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
1.To turn the power on:
VIDEO A + Input mode
NTSC + Color system
Push the POWER switch.
The POWER indicator glows green. The mode and color system of an input
signal are automatically discerned and displayed on screen for about 3
seconds. To turn off power, push the POWER switch again, and the
POWER indicator goes off.
2. To select the input:
Push an INPUT SELECT switch.
Push VIDEO A, VIDEO B, RGB/COMPO(SDI) or Y/C. The mode and color
system of a selected input signal are automatically discerned and displayed
on screen for about 3 seconds.
3. To adjust the audio level:
Turn the VOLUME control to the right to increase the level, or to the left to
decrease the level.
●Relation between input mode indication and signal input/terminal
Input mode indication
VIDEO A
Signal input/terminal
Composite video signal input to VIDEO A IN
Composite video signal input to VIDEO B IN
Y/C signal input to Y/C IN
VIDEO B
Y/C
RGB
Analogue RGB signal input to RGB/COMPO(SDI) IN
Component signal input to RGB/COMPO(SDI) IN
COMPO(SDI)
●Color system indication
Colour sub-carrier
frequency
Vertical scanning
frequency
indication Colour system
NTSC
PAL
NTSC
PAL
3.58 MHz
4.43 MHz
4.43 MHz
60 Hz
50 Hz
60 Hz
N4.43
B/W
NTSC
(Indicates when a black-and-white signal is input)
NO SYNC (Indicates when no signal is input)
NOTE
To demagnetize the picture tube
After positioning near the monitor a speaker (non-magnet-
shielded) or other equipment that generates a strong magnetic
field, or after relocating the monitor, color patches could
appear in the picture due to magnetization of the picture tube.
If this occurs, push the DEGAUSS switch to demagnetize the
picture tube.
●This function is not effective if
activated a second time after a very
short time has elapsed. When
degaussing must be repeated,
proceed after at least 10 minutes
have passed since first degaussing.
●The optional wireless remote control
features a DEGAUSS key.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE ADJUSTMENTS
Turn a separate front panel control to adjust picture contrast, picture brightness,
picture color density, and picture hue respectively:
CONTRAST (picture contrast)
CONTRAST
Softer
Clearer
BRIGHT (picture brightness)
BRIGHT
NOTE
Darker
Brighter
● To adjust the CHROMA and PHASE
controls more precisely, input the
color bar signal and operate the
BLUE CHECK function as follows:
CHROMA (picture color density)
After inputting the color bar signal,
push the front panel BLUE CHECK
switch to display a monochrome
blue picture without red/green signal
components. Turn the CHROMA
and PHASE controls so that all
(four, in the example below) blue
bars have the same density and
brightness.
CHROMA
Thinner
Denser
PHASE (picture hue)
PHASE
Purplish
Greenish
Relationbetweenpictureadjustmentsandinputvideosignals
Eachpictureadjustmentiseffectiveforthefollowingvideosignalinput:
Signal
Composite video, Y/C
COMPONENT
RGB
Control
PHASE
NTSC
Yes
PAL
No
NTSC 4.43
Yes
B/W
No
No
No
No
Yes
Yes
Yes
CHROMA
BRIGHT
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
CONTRAST
Yes
Yes
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO SIGNAL CONTROLS
Push each switch to ON or OFF for video signal control.
UNDER SCAN
Push the UNDER SCAN switch to reduce the dimensions of display
area so the whole picture is displayed on screen. Use to check the picture
frame.
PULSE CROSS
Push the PULSE CROSS switch to simultaneously display two blank
areas crossed horizontally and vertically on screen (“Pulse Cross”
display) by delaying the phase of the input signal. Use to check the
vertical retrace line period, equalizing pulse period, vertical sync period,
horizontal sync pulse, or burst signal.
NOTE
●This function is not effective for
analog RGB signal input.
COLOR OFF
NOTE
Push the COLOR OFF switch to display a black-and-white picture by
inputting a luminance signal only. Use to check the noise contained in a
luminance signal or white balance.
●This function is not effective for
analog RGB signal input.
BLUE CHECK
Push the BLUE CHECK switch to display a monochrome blue picture
by eliminating red and green signal components. Use to check or adjust
the CHROMA and/or PHASE controls.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU CONTROLS
By calling up the menu display on screen, various functions can be selected and set
as needed.
NOTE
Calling up the menu display, selecting an item
1. Press the MENU button to call up the menu display on screen (see 1
●When the menu display 1 (shown at
left below) is on screen, press the
ENTER button. The display changes
below). (Press again to make the display disappear.)
to 2 (shown below center). In this
2. Press the ▲ or ▼ button to select an item to be set. “ ” is indicated for the
state, you can also select the item or
change the setting.
selected item.
●When the display 2 is on screen,
3. Press the or button to change the setting.
each time the ▼ button is pressed
4. After selecting another item by pressing the ▲ or ▼ button, repeat step 3.
while the ENTER button pressed,
the indication moves up or down on
These settings are all kept in memory after power is turned off.
screen (the display 3). Press the
5. Press the MENU button to complete. The menu display disappears.
MENU button with display 2 or 3
on screen, and the display is
restored to 1.
●If no operation occurs for about 5
minutes after calling up the menu
display on screen, the display
disappears automatically.
qMENU r
AFC
:NORMAL
ASPECT RAT IO :4-3
F I LTER SELECT :COMB
PEAK ING FREQ. :2.6MHZ
PEAK ING LEVEL:0dB
AFC
COLOR TEMP.
:NORMAL
:6500
NTSC SETUP
COMPO. LEVEL
:7.5
:BETA75
qMEMORY MODE r
RGB /COMPO(SDI) :RGB
AFC
:NORMAL
ENTER
:
2
1
3
ASPECT RATIO (picture aspect ratio switching)
●4:3
The aspect ratio of the picture can be switched between 4:3 and 16:9.
When switching to “16-9” on screen, the height of the picture is slightly
reduced (see right).
Setting
Function
Standard picture aspect ratio (4:3)
Displays the picture in 16:9 aspect ratio
●16:9
4-3
16-9
FILTER SELECT (built-in filter selection)
NOTE
When a composite video signal of the NTSC system (excluding NTSC
4.43) is input to the monitor, either or both of two filters in the monitor can
be activated.
● The function can be operated and
the indication appears only when a
composite video signal of the NTSC
system (excluding NTSC 4.43) is
input to the monitor.
Setting
COMB (comb filter)
BOTH (both filters)
NOTCH (Trap filter)
Function
Reduces colour noise in NTSC video signals for clearer pictures.
Both comb and trap filters function at the same time.
Eliminates dot interference that would show up in the vertical
boundary between two different colours.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU CONTROLS (continued)
PEAKING FREQ./PEAKING LEVEL (picture quality improvement)
NOTE
Corrects the luminance signal to improve picture quality by changing
●When analog RGB signals are input
peak frequency and/or peak level depending on the video signal input to
to the monitor, the indications do not
the monitor. Use PEAKING FREQ. to set correction frequency. Use
appear and the functions cannot be
PEAKING LEVEL to set correction level.
operated.
Setting (ferquency)
2.6 MHz
5.0 MHz
Function
For composite video signal or Y/C signal.
For component video signal.
Setting (level)
0 dB to +9 dBs
Function
Set a higher level for correction to a higher degree.
NOTE
AFC (switching of time constant for the AFC)
Use to set the time constant for the AFC (auto fine-frequency control)
to correct skew distortion of video signals input via a videotape recorder
or other video equipment.
●By changing the default setting of
white balance adjustment under the
SET-UP MENU display (see page
15 for adjustment), the ✻ indication
is added to the right of the setting to
indicate that the factory-preset
setting was changed.
Setting
Function
NORMAL
FAST
Normal-speed correction.
Faster correction.
SLOW
Slower correction.
qMENU r
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
ASPECT RAT IO
F I LTER SELECT
PEAK ING FREQ.
PEAK ING LEVEL
AFC
COLOR TEMP. (color temperature switching)
Use to set the color temperature of white balance.
Setting
Function
COLOR TEMP.
9300
6500
To 9300K.
To 6500K.
NTSC
COMPO. LEVEL
qMEMORY MODE r
SETUP
:7.5
:BETA75
RGB /COMPO(SDI)
ENTER
:RGB
:
NTSC SETUP (NTSC set-up level)
Use to set up the luminance signal level to match the configuration
NOTE
of the video signal input to the monitor.
Setting
Function
●The item and setting are indicated
on screen and the function can be
operated only when a video signal of
the NTSC system is input to the
monitor.
0
For video signal with 0% luminance signal.
For video signal with 7.5% luminance signal.
7.5
COMPO. LEVEL (chrominance level setting)
Use to set the chrominance level of a component video signal.
NOTE
Setting
Function
●The item and setting are indicated
on screen and the function can be
operated only when a component
video signal is input to the monitor.
SMPTE
BETA00
For component video signal input via an M videotape recorder.
For component video signal input (set-up level:0%) via a
BETACAM videotape recorder.
BETA75
For component video signal input (set-up level:7.5%) via a
BETACAM videotape recorder.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY MODE
A set of picture settings can be programmed in memory
for quick recall when necessary.
Recall/release of memory mode
NOTE
Press the MEMORY MODE switch to recall a set of picture settings
● If you attempt to operate a locked
function, “MEMORY MODE ON!!”
appears on screen for approx. 2
seconds to indicate the function
cannot be operated.
programmed in memory.
Pressing the switch locks the functions of the front-panel PHASE,
CHROMA, BRIGHT, CONTRAST controls, and remote-control picture
adjustments not to be operated.
Press again to release memory mode.
Setting programming of the picture being monitored
NOTE
The settings of the picture being monitored can be programmed in
● Programmed picture settings are
kept in memory after the power is
turned off.
memory.
Settings programmable in memory mode:
● Settings of the CONTRAST, BRIGHT, CHROMA and PHASE controls on the
front panel
qMEMORY MODE r
● On-screen menu function settings (except RGB/COMPO(SDI))
● Remote-control picture adjustment settings
Are you sure ?
ENTER
gYes hthen
gNo h then or
1. Check the MEMORY MODE switch is off.
2. Press the MENU button.
3. Press the ▲ or ▼ button to select MEMORY MODE.
Then press the ENTER button.
4. ●Press the ENTER button to program.
●Press the or button to cancel.
NOTE
● No matter what video signal is input,
all items appear on screen. How-
ever, depending on the type of input
video signal, some functions might
not operate even if their settings are
made.
Revision of memory mode
Programmed picture settings can be revised if necessary.
1. Press the MEMORY MODE switch to activate memory mode.
2. Press the MENU button to call up display 1 on screen.
qMEMORY MODE REV I SE
P ICTURE ADJUSTMENT
ASPECT RAT IO
F I LTER SELECT
PEAK ING FREQ.
PEAK ING LEVEL
AFC
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
:7.5
COLOR TEMP.
NTSC
SETUP
COMPO. LEVEL
ENTER
:BETA75
:
1
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY MODE (continued)
3. Press the ▲ or ▼ button to select a function to be revised.
qMEMORY MODE REV I SE
CONTRAST
:0
:0
:0
:0
:
BR I GHT
CHROMA
PHASE
ENTER
Press the ENTER button after selecting PICTURE ADJUSTMENT to call up
display 2.
After making all settings on screen, press the MENU button to make display
1 appear.
4. Press the or button to change the set level.
2
Adjustable CONTRAST, BRIGHT, CHROMA or PHASE range depends on
each set level previously stored in memory. MAX appears to indicate maximum
level that cannot be increased. MIN appears to indicate minimum level that
cannot be decreased.
●Variable setting range
NOTE
Function
CONTRAST
Variable setting range
-20 to +20
-20 to +20
-20 to +20
-20 to +20
16:9
Default set level
0
0
PICTURE
ADJUST-
MENT
BRIGHT
CHROMA
PHASE
● If the ENTER button is pressed after
a function other than PICTURE
ADJUSTMENT is selected, the on-
screen display changes into a
single-line one. To select another
function after making a change in
function, press the MENU button to
restore display 1.
0
0
ASPECT RATIO
FILTER SELECT
PEAKING FREQ.
PEAKING LEVEL
AFC
4:3
4:3
COMB BOTH NOTCH
2.6MHz 5.0MHz
COMB
2.6MHz
0dB
0dB + 1dB · · · + 9dB
NORMAL FAST SLOW
9300 6500
NORMAL
6500
7.5
COLOR TEMP
NTSC SET UP
COMPO. LEVEL
0
7.5
SMPTE BETA00 BETA75
BETA75
5. With display 1 on screen, press the MENU button to make display 3
appear.
qMEMORY MODE REVISE
●Press the ENTER button to program.
●Press the or button to cancel.
Are you sure ?
ENTER
gYes hthen
gNo h then or
3
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UPFORMONITORINSTALLATION
When installing the monitor, make set-up adjustments required for the picture set-
tings to match conditions where the monitor is to be used.
To call up SET-UP MENU and select a function:
1. To make 1 (SET-UP MENU) appear, with the ENTER button pressed,
qSET-UP MENU r
S I ZE / CENTER I NG
WHI TE BALANCE ADJUST
REMOTE SELECT
press the MENU button.
STATUS D I SPLAY :ON
2. Press the ▲ or ▼ button to select an adjustment item.
CONTROL LOCK
ENTER
:OFF
:
(To set STATUS DISPLAY or CONTROL LOCK, steps 3 and 4 are not
necessary.)
3. Press the ENTER button to call up the adjustment menu 2 of a selected
item (e.g. WHITE BALANCE).
1
4. Press the ▲ or ▼ button to select a function to be adjusted.
qWHITE BALANCE r
RED DRIVE
:0
:0
:0
:0
:0
:0
:
5. Press the
or button to change the setting.
GREEN DRIVE
BLUE DRIVE
RED CUTOFF
GREEN CUTOFF
BLUE CUTOFF
ENTER
6. With the display 1 on screen, press the ▲ or ▼ button to select another
function and repeat step 5.
7. Press the MENU button to complete. SET-UP MENU disappears.
To make 1 (SET-UP MENU) disappear:
Press the MENU button.
To make 2 (e.g. WHITE BALANCE) disappear:
Press the MENU button twice.
2
NOTE
●EachtimetheMENUbuttonispressed,
the previous menu is restored.
SIZE/CENTERING (size/positioning adjustments of RGB signal pictures)
NOTE
For analog RGB video signal pictures, horizontal size, vertical size,
● SIZE/CENTERING appears and the
function is operable only when
monitoring the picture of analog RGB
video signals.
horizontal positioning and vertical positioning can be finely adjusted.
Adjustment
Function
+ moves the picture to right.
H.POSITION (-10,-9…0…+9, +10)
- moves the picture to left.
+ moves the picture down.
- moves the picture up.
V.POSITION (-10,-9…0…+9, +10)
H.SIZE (-10,-9…0…+9, +10)
V.SIZE (-10,-9…0…+9, +10)
+ makes the picture wider.
- makes the picture narrower.
+ makes the picture higher.
- makes the picture lower.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UP FOR MONITOR INSTALLATION (continued)
WHITE BALANCE ADJUST (white balance adjustments)
NOTE
Before making these adjustments, select the color
● By making white balance
temperature 9300K or 6500K on MENU.
adjustments on SET-UP MENU, ✻
appears to the right of the COLOR
Adjustment (level)
Function
TEMP. setting on MENU
(see page 11).
RED DRIVE (-10,-9…0…+9, +10)
GREEN DRIVE (-10,-9…0…+9, +10)
BLUE DRIVE (-10,-9…0…+9, +10)
RED CUTOFF (-10,-9…0…+9, +10)
Adjusts the drive level of a red signal component.
Adjusts the drive level of a green signal component.
Adjusts the drive level of a blue signal component.
Sets the cut-off voltage of a red signal component.
GREEN CUTOFF (-10,-9…0…+9, +10) Sets the cut-off voltage of a green signal component.
BLUE CUTOFF (-10,-9…0…+9, +10) Sets the cut-off voltage of a blue signal component.
qREMOTE SELECT r
INPUT :A B
CNTL - 1 : UNDER SCAN
CNTL - 2 :ASPECT RAT I O
ENTER
:
REMOTE SELECT (TALLY/REMOTE-terminal settings)
Via the TALLY/REMOTE terminal, the tally lamp can be
turned on/off, or a function (selected from display 3 shown
on the right) can be operated using an external control.
3
INPUT setting indications and selected inputs
❉: indicates when deactivating the remote control via the TALLY/REMOTE terminal
Setting
NOT USE AÔB AÔY/C AÔRGB AÔCOMPO BÔY/C BÔRGB BÔCOMPO Y/CÔRGB Y/CÔCOMPO RGBÔCOMPO
Indication
Short-circuit
Open-circuit
∗
∗
A
B
A
A
A
B
B
B
Y/C
Y/C
RGB
Y/C
RGB
COMPO.
Y/C
RGB
COMPO.
RGB
COMPO.
COMPO.
CNTL-1/CNTL-2 setting indications and set positions
❉: indicates when deactivating the remote control via the TALLY/REMOTE terminal
SettingIndication
Short-circuit
NOT USE UNDER SCAN PULSE CROSS COLOR OFF BLUE CHECK EXTERNAL SYNC ASPECT RATIO COLOR TEMP. AUDIO MUTE
∗
∗
ON
ON
ON
ON
External
Internal
16-9
4-3
6500
9300
ON
OFF
OFF
OFF
OFF
OFF
Open-circuit
NOTE
[TALLY/REMOTE terminal functions
●When the TALLY/REMOTE terminal
is used, the following functions
become deactivated (except when
they are set to "NOT USE"):
- Front INPUT SELECT and EXT
SYNC switches
All controls via TALLY/REMOTE terminal are made by short-circuiting or open-circuiting
any pin from Pin 1 to 4 and either Pin 7 or 8 (GND each) of this terminal.
When using this terminal, be sure to short-circuit Pin 5 and either Pin 7 or 8.
GND
- Front UNDER SCAN, PULSE
CROSS, COLOR OFF and BLUE
CHECK switches
∗1
Tally lamp
To open-circuit
6
4
To turn off
7
CNTL-1
8
TALLY
To turn on
- On-screen MENU’s ASPECT RATIO
and COLOR TEMP. functions
1
3
To
short-circuit
5
- Remote MUTE key
2
To open-circuit
CNTL-2
●If a function is applied to both CNTL-1
and CNTL-2, CNTL-1 has priority.
To short-circuit
To open-circuit
INPUT
∗1: Pin 6 is DC power output pin. It
outputs DC 5 V when the monitor’s
power is on. (Do not short-circuit pin 6
directly to ground.)
To
short-circuit
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UP FOR MONITOR INSTALLATION (continued)
STATUS DISPLAY (setting the status display to on/off)
When the power is turned on or the input mode is switched, the
status display (color system and input mode) appears on screen. The
display can be set to on or off.
Setting
Function
ON
Status display appears.
Status display does not appear.
OFF
CONTROL LOCK (deactivation of front-control functions)
NOTE
Set CONTROL LOCK to ON on screen to deactivate the front-control
functions (front VOLUME control and remote volume control are operable).
● If you attempt to operate a locked
function, “CONTROL LOCK ON!!”
appears on screen for approx. 2
seconds to indicate the function
cannot be operated.
Setting
Function
Deactivates the front controls
ON
(except front/remote volume controls).
Releases deactivated functions.
● Once CONTROL LOCK is deacti-
vated, the current settings of the
front-control knobs and buttons are
activated.
OFF
● If the power is turned off with
CONTROL LOCK activated, the
function is kept in memory.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE SETTING INITIALIZATION
The MENU and/or SET-UP MENU settings, including changes added later by the user,
can be reset (initialized) to their initial (default) settings.
To initialize MENU settings only
NOTE
MENU settings (except MEMORY MODE and RGB/COMPO(SDI)) can
●For initial (default) MENU settings,
be exclusively reset:
see page 21.
1. With the ▼ button pressed, press the MENU button to display 1 on screen.
qMENU rRESET
2. ●Press the ENTER button to reset.
Are you sure ?
●Press the or button to cancel.
ENTER
gYes hth
gNo h then or
●MENU and PICTURE ADJUST settings (except MEMORY
MODE and RGB/COMPO(SDI)) can also be simultaneously
reset via the optional wireless remote control unit:
1
1. Press the MENU key to display MENU on screen.
2. Press the RESET key to execute.
To initialize both MENU/SET-UP MENU settings
qIN I T I ALIZE MENU r
ID NUMBER SET
qSET-UP MENU rRESET
ENTER
MENU and SET-UP MENU settings other than MEMORY MODE and
RGB/COMPO(SDI) can be reset at the same time. In this case, PICTURE
ADJUST settings via remote control are also reset, and the monitor’s ID
number is also reset to 00.
1. Press the POWER switch to turn the power off.
2. With the ▼ and MENU buttons pressed, press the POWER switch to turn
2
the power on. Keep pressing the ▼ and MENU buttons until 2 appears on
screen.
qSET-UP MENU rRESET
3. Press the ▲ or ▼ button to select SET-UP MENU RESET. Then press the
ENTER button to display 3 on screen.
Are you sure ?
4. ●Press the ENTER button again to execute.
ENTER
gYes hthen
●Press the or button to cancel.
gNo h then or
3
17
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROLS
The optional wireless remote control unit (RM-C550W) operates the following:
●On-screen menu functions (MENU, SET-UP MENU, etc.)
●Picture adjustments (CONTRAST, BRIGHT, CHROMA, PHASE)
●Sound adjustments (VOLUME, MUTE)
On-screen menu remote operation
Remote keys and front controls with the same designation share the
common functions. For detailed operation, see instructions about each
menu function in this manual.
NOTE
●When monitoring the picture of analog
RGB signals, component signal or
black-and-whitesignal,CHROMAand
PHASE do not appear and cannot be
adjusted.
Picture adjustments
Each adjustable range depends on the setting of the front CONTRAST/
BRIGHT/CHROMA or PHASE control. If an adjustment is made via remote
control with the front control set approximately to the maximum or minimum,
the level may indicate a certain change on screen but may not actually
increase or decrease.
● When a video signal of the PAL sys-
tem is input to the monitor, PHASE
does not appear and cannot be ad-
justed.
1. Press the PICTURE key to display PICTURE ADJUST.
2. Press the ▲ or ▼ key to select an item.
qP I CTURE ADJUST r
CONTRAST
BR I GHT
CHROMA
PHASE
:0
:0
:0
:0
:
3. Press the or key to change the level:
: Moves the cursor to left (to decrease the level).
: Moves the cursor to right (to increase the level).
4. Press the ▲ or ▼ key to another item and repeat step 3.
5. Press the PICTURE key to complete.
ENTER
●To standardize all settings on PICTURE ADJUST:
NOTE
After step 1, press the RESET key.
●EachtimethePICTUREkeyispressed,
the previous display is restored.
VOLUME: @+01
Sound adjustments
A variable range depends on the setting of the front VOLUME control.
If audio level is remote-controlled with front VOLUME control set approxi-
mately to the maximum or minimum, the level may indicate a certain change
on screen but may not actually increase or decrease.
●Press the VOLUME – or + key to decrease or increase the level (within ±20).
●Press the MUTE key to mute the sound. MUTE appears on screen for
approx. 3 seconds. Press again to release.
NOTE
● If the power is turned off with sound-
muting activated, the function is kept
in memory.
● To release sound-muting, turn the
front VOLUME control or press the
remote VOLUME – or + key .
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EACH REMOTE CONTROL OF PLURAL MONITORS
To operate or adjust plural units of monitors, by programming and assigning an ID
number (00 to 99) for each monitor, a specified monitor can be remote-controlled.
To program an ID number (use front controls):
1. Press the POWER switch to turn the power off.
2. With the ▼ and MENU buttons pressed, press the POWER switch to turn
q IN I T IALIZE MENU r
ID NUMBER SET
qSET -UP MENU rRESET
ENTER
the power on. Keep pressing the ▼ and MENU buttons until 1 appears.
3. Press the ▲ or ▼ button to select ID NUMBER SET. Then press the
ENTER button to display 2.
4. Select an ID number.
1
Press the button to increase.
Press the button to decrease.
qID NUMBER SET r
5. Press the ENTER button to program.
00
To call up an ID number (use remote unit):
1. Press the DISPLAY key to indicate a programmed ID number at top right of the
2
NOTE
screen.
●Red-indicated ID number:
● ID number 00 is always indicated in
red.
indicates the monitor can be remote-controlled.
●Green-indicated ID number:
indicates the monitor cannot be remote-controlled.
2. Press the DISPLAY key to make the number disappear.
Programmed
ID number
15
To assign a monitor (use remote control):
1. Press the DISPLAY key to display the monitor’s programmed ID number.
2. Press the numeric keys to enter the monitor’s ID number.
The entered ID number appears and blinks on screen center.
3. Press the ID SET key to complete.
Assigned
ID number
15
The programmed ID number in the top right of the screen turns red to indicate
the monitor was assigned. Other monitors’ ID numbers are indicated in green.
4. After adjusting the monitor, repeat steps 2 to 4 to adjust each monitor if
necessary.
5. Press the DISPLAY key to clear on-screen ID numbers.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING FOR SERVICE
Before concluding a problem has occurred, check the following points. If the problem
persists after carrying out the checks, disconnect the power cord from the AC outlet and
consult the dealer from whom you purchased the monitor.
Problems
Points to be checked
Measures
Inoperable adjustment controls
or buttons.
Is MEMORY MODE switched on? Switch off.
Is CONTROL LOCK activated?
Deactivate it.
Abnormal picture adjustments
with all controls at centre.
Are PICTURE ADJUST menu
settings changed via remote
control?
Reset to standard settings.
Inoperable picture
synchronisation.
Is EXT SYNC switched on?
Switch to off.
Inoperable remote-controlled
picture adjustments.
Are the front controls set
approximately to the maximum
or minimum?
If so, the settings may not extend
any more via remote control
(although setting levels indicated
on screen may show a slight
change).
Assigned remote control ID
number operates another
monitor.
Is ID number 00 programmed for Programme an ID number other
other monitors? than 00.
Do other monitors indicate a red Assign the ID number again.
ID number?
Inoperable remote control.
Is the ID number programmed
for other monitors assigned?
Assign the monitor's
programmed ID number.
No sound via audio signal input.
No INITIALIZE MENU display.
Does the audio input terminal
match the video input terminal?
Each audio input terminal is
linked with a video input terminal.
Are you pressing the ∞ and
MENU buttons until it appears?
Keep pressing these buttons until
it appears.
Inoperable CNTL-2 external
control via TALLY/REMOTE
terminal.
Is a function applied common to
CNTL-1 and CNTL-2?
Set other functions to CNTL-2.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU DISPLAY CHART
The initial (default) adjustments/settings are shown in the menus below.
When the monitor was shipped from the factory, the NTSC SETUP had been set to 7.5
and the COMPO. LEVEL to BETA 75.
For PICTURE ADJUST MENU via remote control, see page 18.
MENU
Menu functions
Memory-Mode programming
qMEMORY MODE r
qMENU r
:4-3
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
:7.5
ASPECT RAT IO
F I LTER SELECT
PEAK ING FREQ.
PEAK ING LEVEL
AFC
Are you sure ?
ENTER
ENTER
ENTER
gYes hthen
gNo h then or
COLOR TEMP.
NTSC
SETUP
COMPO. LEVEL
:BETA75
qMEMORY MODE r
RGB /COMPO(SDI)
ENTER
:RGB
:
MENU
MEMORY MODE + MENU
Memory-Mode revision menu
Memory-Mode revision
Memory-Mode picture adjustments
qMEMORY MODE REV I SE
P ICTURE ADJUSTMENT
qMEMORY MODE REV I SE
qMEMORY MODE REVISE
CONTRAST
BR I GHT
CHROMA
PHASE
:0
:0
:0
:0
:
ASPECT RAT IO
F I LTER SELECT
PEAK ING FREQ.
PEAK ING LEVEL
AFC
:4-3
Are you sure ?
:COMB
:2.6MHZ
:0dB
:NORMAL
:6500
:7.5
ENTER
ENTER
gYes hthen
gNo h then or
COLOR TEMP.
NTSC
SETUP
COMPO. LEVEL
ENTER
:BETA75
:
RGB-signal picture
size/positioning adjustments
ENTER + MENU
qS I ZE / CENTER I NG r
Set-up for monitor installation
H. POS I T I ON
V. POS I T I ON
H. S I ZE
V. S I ZE
ENTER
:0
:0
:0
:0
:
qSET-UP MENU r
S I ZE / CENTER I NG
WHI TE BALANCE ADJUST
REMOTE SELECT
STATUS D I SPLAY :ON
CONTROL LOCK
ENTER
ENTER
ENTER
:OFF
:
White-balance adjustments
qWHITE BALANCE r
RED DRIVE
GREEN DRIVE
BLUE DRIVE
RED CUTOFF
GREEN CUTOFF
BLUE CUTOFF
ENTER
:0
:0
:0
:0
:0
:0
:
¥+ MENU
Menu-function resetting
qMENU rRESET
Remote-terminal settings
Are you sure ?
qREMOTE SELECT r
INPUT
: NOT USE
ENTER
gYes hth
ENTER
ENTER
CNTL - 1 : NOT USE
CNTL - 2 : NOT USE
gNo h then or
ENTER
:
¥+ MENU + POWER
“Initialize” menu
ID-number programming
Menu-function standardization
q
IN I T IALIZE MENU r
qID NUMBER SET r
qSET-UP MENU rRESET
ID NUMBER SET
qSET -UP MENU rRESET
ENTER
Are you sure ?
ENTER
ENTER
gYes hthen
00
gNo h then or
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Type
: Color video monitor
: Y, R-Y, B-Y component
Color systems
Picture tube
: NTSC 3.58 MHz, NTSC 4.43 MHz, PAL
: [BM-H1900SU]
RGB / COMPO (SDI)
(1 line: common with analog RGB)
Y: 1.0 V (p-p), 75 Ω, negative sync
R-Y, B-Y: 0.7 V (p-p), 75 Ω
19" (47.5 cm) diagonally measured,
90° deflection, in-line gun, medium-
high-definition cathode-ray tube, trio-
dot type (dot pitch of 0.4 mm),
SMPTE-C phosphor
External sync inputs : SYNC (1 line),
BNC x 2 (with 1 bridge-connected
output)
[BM-H1310SU]
0.2 V (p-p) – 4.0 V (p-p) composite
sync, 75 Ω, negative sync
Termination switch provided
: AUDIO A, B, RGB / COMPO (SDI)
(3 lines), RCA x 2 each
13" (33 cm) diagonally measured,
90° deflection, in-line gun,
high-definition tinted cathode ray tube,
trio-dot type (dot pitch of 0.28 mm)
Audio inputs
Screen size (W x H) : [BM-H1900SU]
15-11/16" x 11-3/4"
(with 1 bridge-connected output)
500 mV (rms), high impedance
(399 mm x 298 mm)
Tally/remote terminal : TALLY / REMOTE, DIN (8-pin) x 1
Audio power output : 1.6 W
[BM-H1310SU]
11-1/16" x 8-5/16"
Built-in speaker
: 3-9/16" x 2" (9 cm x 5 cm) oval x 1
(280 mm x 210 mm)
Operation temperature: 0 °C – 40 °C (20 % – 80 % RH)
Power requirements : 120 V AC, 50 Hz / 60 Hz
Power consumption : 0.9 A
Scanning frequency : H: 15.734 kHz
(NTSC 3.58 MHz / 4.43 MHz)
15.625 kHz (PAL)
V: 59.94 Hz
Dimensions (WxHxD) : [BM-H1900SU]
17-3/4" x 17" x 20-1/8"
(NTSC 3.58 MHz / 4.43 MHz)
50 Hz (PAL)
(449 mm x 431 mm x 511 mm)
[BM-H1310SU]
Horizontal resolution : 750 TV lines or more
13-5/8" x 13-1/8" x 16-1/4"
Color temperature
: 6500 K; x = 0.313, y = 0.329
9300 K; x = 0.283, y = 0.297
(selectable)
(346 mm x 332 mm x 410 mm)
Weight
: [BM-H1900SU] 66 lbs (30 kg)
[BM-H1310SU] 35.6 lbs (16.2 kg)
Video inputs
: Composite video
Provided accessory : Power cord x 1
INPUT A, B (2 lines), BNC x 2 each
(with 1 bridge-connected output)
Termination switches provided
1.0 V (p-p), 75 Ω, negative sync
: Y/C
Optional accessories : Wireless remote control unit
(RM-C550W)
Y/C (1 line), Mini-DIN (4-pin) x 2
(with 1 bridge-connected output)
Termination switch provided
Y: 1.0 V (p-p), 75 Ω, negative sync
C (NTSC 3.58 MHz / 4.43 MHz):
0.286 V (p-p), 75 Ω
C (PAL): 0.3 V (p-p), 75 Ω
: Analog RGB
RGB / COMPO (SDI)
(1 line: common with Y, R-Y, B-Y,
component),
BNC x 6 (with 3 bridge-connected
outputs)
Termination switches provided
R,B: 0.7 V (p-p), 75 Ω
G: 0.7 V (p-p), 75 Ω
G on sync: 1.0 V (p-p), 75 Ω, negative
sync
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
❋ The faceplate dimensions shown are larger than the visible portion of screen (Screen size).
BM-H1310SU
13-5/8" (346mm)
16-1/4" (410mm)
*
*
11-3/8"(287mm)
UNDER PULSE COLOR BLUE MEMORY
MENU
DEGAUSS
SCAN CROSS
OFF
CHECK MODE
VOLUME
PHASE CHROMA BRIGHT CONTRAST
POWER
VIDEO
RGB/
COMPO(SDI)
EXT
SYNC
Y/C
A
B
ON
OFF
ENTER
INPUT SELECT
9-3/8"(238mm)
3-3/8"
(83.5mm)
Front 13"(327.5mm)
Rear 11-1/8"(280mm)
BM-H1900SU
❋ The faceplate dimensions shown are larger than the visible portion of screen (Screen size).
20-1/8" (511mm)
17-3/4" (449mm)
*
*
15-7/8"(401mm)
UNDER PULSE COLOR BLUE MEMORY
MENU
DEGAUSS
SCAN CROSS
OFF
CHECK MODE
VOLUME
PHASE CHROMA BRIGHT CONTRAST
POWER
VIDEO
RGB/
COMPO(SDI)
EXT
SYNC
Y/C
A
B
ENTER
ON
OFF
INPUT SELECT
13-7/8"(351mm)
14-5/8"(370mm)
3-5/8"
(91.5mm)
E. & O.E. Design and specifications subject to change without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
1700 Vallery Road Wayne, NJ07470
JVC CANADA INC.
21 Finchdene Square, Scarborough Ontario M1X 1A7
Printed in Japan
LCT0696-001A
1199-Tu-V-Ni
C 1999 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|