JVC Headphones SU DH1 E User Manual

English  
SOME DOS AND DONTS ON THE SAFE USE OF  
EQUIPMENT”  
This equipment has been designed and manufactured to  
meet international safety standards but, like any electrical  
equiprnent, care must be taken if you are to obtain the best  
results and safety is to be assured.  
For your safety…  
CONNECTION  
Never use this unit when driving a car, motor  
cycle, or bicycle. This could result in an accident.  
Be careful not to turn the sound volume up  
too high when using the headphones. Your hearing can  
be damaged by listening to sounds at excessive volume  
for long periods.  
To digital audio output  
EX.:  
To Headphone  
SURROUND SOUND HEADPHONE ADAPTOR  
SURROUNDKLANG-KOPFHÖRERADAPTER  
ADAPTATEUR DE SON SURROUND POUR  
CASQUE D’ÉCOUTE  
The right side  
*3 LINE IN ATT switch  
S
NE  
PHO  
L
IT  
A
IN  
DIG  
B
-8d  
E
IN  
LIN  
TT  
0dB  
A
Adjusts the volume level of the component connected by LINE IN cord. Set the switch to -8dBin standard use.  
When the volume level of the component connected by LINE IN cord is low, set the switch to 0dB.”  
Do  
read the operating instructions before you  
attempt to use the equipment.  
Do not disassemble or modify this unit.  
Do not allow inflammables, water or metallic objects to  
enter this unit.  
DVD recorder/player  
Do  
ensure that all electrical connections (including the  
mains plug, extension leads and inter-connections  
between pieces of equipment) are properly made  
and in accordance with the manufactuer’s  
instructions. Switch off and withdraw the mains plug  
when making or changing connections.  
consuit your dealer if you are ever in doubt about  
the installation or operatation or safety of your  
equipment.  
Be sure to turn off the power of the unit and component when you connect the component.  
While connecting the cord to the DIGITAL IN jack, the digital input is given priority. To reproduce the sound  
from the component connected by LINE IN cord, disconnect the cord from the DIGITAL IN jack.  
While connecting the stereo headphone jack of a portable component by LINE IN cord, noise may be heard if  
the volume level of the component is set too low. In this case, increase the volume.  
When you connect the component having the digital optical jack for digital audio output, please use a digital  
optical plug/digital mini plug cord such as XN-210SA, XN-220SA and XN-230SA. (Not supplied)  
When you connect the LINE IN cord to a component having the jack size of ø6.3mm, please use the plug  
adapter AP-113. (Not supplied)  
PHONES  
AL IN  
DIGIT  
-8dB  
LINE IN  
0dB  
T
Mini plug cord of  
headphone  
AT  
SU-DH1-E  
Digital broadcast tuner  
About batteries…  
Misuse of battery could result in leakage. This  
could cause a fire or explosion. To prevent this,  
pay special attention to the following points:  
Be sure to insert the battery with correct positive and  
negative polarities.  
Digital mini plug cord (Not supplied)  
Do  
Do  
SURROUND SOUND HEADPHONE ADAPTOR  
The bottom side  
To headphone output  
EX.:  
be careful with glass panels or doors on equipment.  
This unit only supports the sampling rate 44.1kHz and 48kHz for input signal. When you use a DVD player for  
the source component, please set the output settings of the DVD player to 48kHz. When you play a sound  
with the sampling rate 32kHz, please input using LINE IN cord.  
Do not heat, disassemble or short-circuit battery and never  
dispose of battery by throwing them in a fire.  
LINE IN cord  
DONT continue to operate the equipment if you are in  
any doubt about it working normally, or if it is  
damaged in any way—switch off—withdraw  
the mains plug and consult your dealer.  
(Use this cord for  
analog connection.  
Located at the  
Read the caution displayed on the battery when in use.  
While inputting with digital optical signal, the beginning sound of the track may not come out. This is not a  
malfunction.  
bottom of the unit.)  
Digital input from a PC may not be performed accurately due to the connected component. In this case, use  
LINE IN cord for input.  
Noise may be heard while fast-forwarding or fast-reversing a music source encoded with DTS. This is not a  
malfunction.  
DONT remove any fixed cover as this may expose  
dangerous volltages.  
Game  
Digital audio player Portable DVD player  
DONT leave equipment switched on when it is  
unattended unless it is specifically stanted that it is  
designed for unattended operation or has a standby  
mode. Switch off using the switch on the equipment  
and make sure that your family know how to do  
this. Special arrangements may need to be made  
for infirm or handicapped people.  
DONT use equipment such as personal stereos or radios  
so that you are distracted from the requirements of  
road safety. It is illegal to watch television when  
driving.  
DONT listen to headphones at high volume as such use  
can permanently damage your hearing.  
DONT obstruct the ventilation of the equipment, for  
example with curtains or on soft furnishings.  
Overheating will cause damage and shorten the life  
of the equipment.  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL DINSTRUCTIONS  
About Digital Surround  
PARTS NAME  
BATTERY INSERTION  
Dolby Headphone  
Dolby Headphone is a virtual headphone technology developed by Dolby  
Laboratories.  
3.Close the battery cover  
1. Open the battery cover  
2. Insert the batteries  
1 POWER indicator  
Insert the tab of the battery cover to the  
stopper so that the cover is fixed.  
Slide the cover according  
Be sure to insert the batteries  
with correct positive and  
negative polarities.  
Reproduces the surround system of the Dolby Digital, DTS, MPEG-2 AAC  
and the sound decoded by Dolby Pro Logic II into the 2 channel of the  
stereo headphones.  
Lights up when the power is on.  
2 Decode mode*4 indicator  
Lights up to indicate the input signal.  
to the arrows direction.  
SURROUND SOUND HEADPHONE ADAPTOR  
SU-DH1  
(
D,  
PLII, DTS, MPEG-2 AAC)  
Dolby Digital*1  
3 POWER switch  
Used to reproduce multichannel soundtracks of the software encoded  
with Dolby Digital.  
Turns the power on or off.  
4
5
1
2
4 Dolby Pro Logic II mode indicator  
Indicates the selected mode of  
Dolby Pro Logic II.  
MUSIC  
MOVIE  
AUTO  
Dolby Pro Logic II*1  
Dolby Pro Logic II has a newly developed multichannel playback format to  
decode all 2 channel sources stereo source and Dolby Surround  
encoded source into a 5.1 channel.  
Dolby Pro Logic II has two modes Movie mode and Music mode:  
Pro Logic II Movie (MOVIE)  
Suitable for reproduction of the software encoded with Dolby Surround.  
Pro Logic II Music (MUSIC)  
Suitable for reproduction of any 2 channel stereo music sources.  
DH3  
DH2  
MPEG-2  
AAC  
DH1  
(AUTO/MOVIE/MUSIC)  
DONT use makeshift stands and NEVER fix legs with  
wood screws. To ensure complete safety always fit  
the manufacturer’s approved stand or legs with the  
fixing screws supplied according to the instructions.  
DONT allow electrical equipment to be exposed to rain or  
moisture.  
DTS  
5 Dolby Headphone mode indicator  
Indicates the selected mode of  
Dolby Headphone. (DH1/DH2/DH3)  
6 DOLBY HEADPHONE button  
Selects the mode of Dolby Headphone.  
7 DOLBY PRO LOGIC II button  
Selects the mode of Dolby Pro Logic II.  
8 VOL (volume) controller  
Adjusts the volume level.  
6
3
Stopper  
Tab  
DTS Digital Surround*2  
Used to reproduce multichannel soundtracks of the software encoded  
with DTS Digital Surround.  
DTS Digital Surround (DTS) is another discrete multichannel digital audio  
format available on CD and DVD software.  
7
8
ABOVE ALL  
NEVER let anyone especially children push  
anything into holes, slots or any other opening in the  
case. This could result in a fatal electrical shock.  
NEVER guess or make changes with electrical  
equipment of any kind, it is better to be safe than  
sorry!  
*4 Decode mode  
Supplied batteries are for your initial use.  
The mode of reproduction subject to the digital surround format of each music source.  
The use of manganese batteries causes the battery life to end faster.  
When you use this unit for a long time, please use alkaline batteries.  
MPEG-2 AAC  
MPEG-2 AAC is a surround format developed by MPEG (Moving Picture  
Experts Group). MPEG-2 AAC can reproduce the sound in 5.1 channel at  
the maximum.  
The POWER indicator flashes when the battery life comes to its end. In this case, replace the batteries.  
*1 Manufactured under license from Dolby Laboratories. Dolby, Pro  
Logic, AAC logo , and the double-D symbol are trademarks of Dolby  
Laboratories.  
*2 DTSand DTS VIRTUALare registered trademarks of Digital  
Theater Systems, Inc.  
Informações para os Utilizadores sobre  
a Eliminação de Equipamento Antigo  
Português  
TROUBLESHOOTING  
OPERATIONS  
AAC Patent marking/AAC Patentkennzeichnung/Marque de licence AAC  
Pat. 5,848,391; 5,291,557; 5,451,954; 5 400 433; 5,222,189; 5,357,594; 5  
752 225; 5,394,473; 5,583,962; 5,274,740; 5,633,981; 5 297 236;  
4,914,701; 5,235,671; 07/ 640,550; 5,579,430; 08/678,666; 98/03037;  
97/02875; 97/02874; 98/03036; 5,227,788; 5,285,498; 5,481,614;  
5,592,584; 5,781,888; 08/039,478; 08/211,547; 5,703,999; 08/ 577,046;  
08/894,844; 5,299,238; 5,299,239; 5,299,240; 5,197,087; 5,490,170;  
5,264,846; 5,268,685; 5,375,189; 5,581,654; 5,548,574; 5,717,821  
[Apenas para a União Europeia]  
PROBLEM  
POSSIBLE CAUSE  
The batteries are exhausted.  
The batteries are exhausted.  
SOLUTION  
Power does not come on.  
No sound.  
Replace the batteries.  
Replace the batteries.  
Adjust the sound level.  
Turn on the power.  
Este símbolo indica que o produto com  
este símbolo não deve ser eliminado como  
um resíduo doméstico geral. Se pretender  
eliminar este equipamento, não utilize o  
caixote do lixo normal! Existe um sistema  
de recolha separado para estes produtos.  
Start playing the connected component.  
3
1
2
The connected component is not being played back.  
Headphones volume level is set to low.  
The volume level of the connected component is set to  
low.  
An audio format which cannot be played back through this Check the audio format.  
unit is being input.  
Start playing the connected component.  
Increase the headphones volume.  
Increase the volume level of the connected component.  
Turn the volume controller to  
left or right.  
The appropriate surround mode is  
automatically selected and corresponding  
decode mode*4 indicator lights up.  
Set the POWER switch to ON.  
The POWER indicator lights up.  
Printed in China  
: Decrease  
+ : Increase  
© 2006 Victor Company of Japan, Limited  
LNT0056-001A  
Información para los usuarios sobre  
Español  
Information for Users on Disposal  
of Old Equipment  
The playing component is not outputting the surround  
signal.  
Check the digital audio output settings of the playing  
component and set up so that the playing component can  
output the surround signal.  
Set the LINE IN ATT switch to -8dB.”  
Decrease the volume level of the connected component.  
English  
la eliminación de equipos usados  
Select the mode of Dolby Headphone and Dolby Pro Logic II.  
4
[Sólo Unión Europea]  
[European Union only]  
Noise is heard from the  
The LINE IN ATT switch is set to 0dB.”  
analog connected component. The volume level of the connected component is set to  
high.  
Este símbolo indica que el producto que lo  
lleva no debe desecharse con la basura  
doméstica general. Si desea desechar este  
equipo, ¡no utilice el cubo de basura  
ordinario! Existe un sistema de recogida  
especial para estos productos.  
This symbol indicates that the product with  
this symbol should not be disposed as  
general household waste. If you want to  
dispose of this equipment, please do not  
use the ordinary dust bin! There is a  
separate collection system for these  
products.  
Press the DOLBY HEADPHONE button and the DOLBY PRO LOGIC II button repeatedly to select the surround mode of each function.  
The sound from analog  
connected component is quiet.  
The LINE IN ATT switch is set to -8dB.”  
Set the LINE IN ATT switch to 0dB.”  
Dolby Headphone mode  
Cannot get the surround effect. The Dolby Headphone mode is set to OFF.  
Cannot activate the Dolby Pro The Dolby Headphone mode is set to OFF.  
The music source encoded DTS or multichannel music  
source is being played back.  
The POWER indicator is flashing. The batteries are exhausted.  
Set the Dolby Headphone mode to DH1, DH2 or DH3.  
Set the Dolby Headphone mode to DH1, DH2 or DH3.  
Dolby Pro Logic II mode cannot be used for music source  
encoded DTS and multichannel music source.  
Replace the batteries.  
DOLBY  
HEADPHONE  
Logic II mode.  
DH1  
OFF  
DH2  
DH3  
Informatie voor gebruikers over  
het weggooien van oude apparatuur  
Benutzerinformationen zur  
Entsorgung alter Geräte  
Deutsch  
Nederlands  
DH1:  
DH2:  
DH3:  
OFF:  
Reproduces the sound with less reverberation like a mixing studio.  
Reproduces the sound with suitable reverberation like a usual listening room.  
Reproduces the sound having atmosphere like a mini theatre or concert hall and so on.  
All the indicators including the Dolby Pro Logic II mode indicator go off and the unit reproduces the sound in stereo.  
[Alleen Europese Unie]  
[Nur Europäische Union]  
SPECIFICATIONS  
Dit symbool geeft aan dat het product met  
dit symbool niet bij het huishoudelijk afval  
mag worden gegooid. Gooi dit apparaat  
niet in de normale vuilnisbak! Er is een  
specifiek inzamelingssysteem voor deze  
producten.  
Dieses Symbol zeigt an, dass das damit  
gekennzeichnete Produkt nicht als  
normaler Haushaltsabfall entsorgt werden  
soll. Wenn Sie dieses Gerät entsorgen  
möchten, werfen Sie es nicht in die  
Surround sound headphone adaptor  
Playable format:  
Dolby Digital (Dolby Surround EX), Dolby Pro Logic II, DTS (DTS-ES 6.1ch),  
MPEG-2 AAC, PCM (Fs=44.1kHz, 48kHz)  
Dolby Pro Logic II mode  
Surround function:  
Input terminals:  
Headphone output:  
Power requirements:  
Battery life:  
Dolby Headphone (DH1/DH2/DH3), Dolby Pro Logic II (AUTO/MOVIE/MUSIC)  
Optical digital signal mini jack x 1, LINE IN signal cord with Gold plated stereo mini plug (ø 3.5mm) x 1  
Stereo mini jack x 1  
DOLBY  
PRO LOGIC  
normale Mülltonne! Für Produkte dieser Art  
gibt es ein getrenntes Sammelsystem.  
II  
AUTO  
OFF  
MOVIE  
MUSIC  
Informazioni per gli utenti sullo  
Italiano  
Informations relatives à l’élimination  
des appareils usagés, à lintention des  
utilisateurs  
Français  
smaltimento delle apparecchiature  
AUTO:  
The unit automatically selects MOVIE or MUSIC in compliance with the input signal.  
MOVIE is selected when the playing source is digital input 2 channel DVD or analog input.  
MUSIC is selected when the playing source is digital input CD or MD.  
Suitable for reproduction of the software encoded with Dolby Surround.  
Suitable for reproduction of any 2 channel stereo music source.  
No indicator lights up.  
obsolete  
Alkaline AA battery (DC 1.5V) x 2  
approx. 10hours (using Alkaline AA battery), approx. 2.5hours (using Manganese AA battery)  
82mm x 20mm x 86mm (W/H/D)  
[Solo per lUnione Europea]  
[Union européenne uniquement]  
MOVIE:  
MUSIC:  
OFF:  
Dimensions:  
Questo simbolo indica che il prodotto a cui è relativo  
non deve essere smaltito tra i rifiuti domestici generici.  
Qualora si desideri smaltire questo apparecchio, non  
utilizzare una normale pattumiera! Esiste un sistema  
di raccolta separato per questi prodotti.  
Lorsque ce symbole figure sur un produit,  
cela signifie qu’il ne doit pas être éliminé  
en tant que déchet ménager. Si vous  
souhaitez éliminer cet appareil, ne le jetez  
pas dans votre poubelle ! Il existe un  
système de récupération spécifique pour  
ces produits.  
Mass:  
approx. 99g (include Manganese AA battery)  
When AUTO is selected, the AUTO indicator and the MOVIE or the MUSIC indicator light up.  
You cannot use Dolby Pro Logic II mode when the Dolby Headphone is not activated.  
Dolby Pro Logic II mode cannot be used for music source encoded DTS, and multichannel music source.  
Accessories:  
Manganese AA battery (R6P) x 2 (for initial use), Carrying pouch x 1, Dual plug adaptor x 1  
Design and specifications subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Power Screwdriver 7R User Manual
Insignia DVD Player NS 1DVDR User Manual
Intel Switch 130T User Manual
Intel Switch Express Hub User Manual
John Deere Compact Loader 410B User Manual
Kenmore Water System 625347001 User Manual
Kenwood Stereo System HM 535 User Manual
King Canada Grinder KC 10SG User Manual
King Canada Saw KC 2102C User Manual
Kodak Battery Charger K3ARDC User Manual