ENGLISH
Remote control buttons and functions
Initial Settings (continued)
Adjust Volume
If you select Country Area to “Area-1”
Select the teletext language group.
If you select Country Area to “Area-2”
Select Air or Cable.
1. Select
20
19
Power On / Off
Colour buttons
Turn on “Clear SD”
Turn on “Zoom”
Turn on “Eco Mode”
Turn on “Karaoke”
Favourite channel setting
Display on-screen menu
Operate the menu
To previous screen
Turn on “Sound Meister”
Volume control / Turn off muting
#
1
2
3
4
5
6
7
8
9
!
"
4
4
VOLUME
VOLUME
[
For button side front will be displayed on-screen menu
WIDE LCD PANEL TV INSTRUCTIONS
LT-32A1
12
15
• When press and hold the button for 3 seconds,
on-screen menu will be displayed.
• To exit, press and hold the button again for
3 seconds. ]
Set Up
Set Up
1. Select
OK
Clear SD
ZOOM
> Teletext Language
> Auto Program
OK
Group-1
Group-2
Group-3
Group-4
Group-5
Air
Cable
2
5
8
0
3
6
9
2. Set
1
4
CHANNEL
CHANNEL
Function for viewing Teletext
To Teletext
$
%
&
(
)
~
+
,
ECO
5
6
7
Automatically register channels (Auto Program).
Searching for the channels (Auto Program)
5
6
5
6
RETURN
+
KARAOKE
Change channel / Page / Hyper Scan
Channel information
Switch between TV / Video input
Return Plus / Return function
Change channel / page
18
17
7
8
1
TV/VIDEO
MENU
Set Up
Set Up
OK
> Auto Program
>> Auto Program
CH 40
CH 40
5%
5%
OK
9
Microphone
GGT0353-001A-H
0610GLT-NF-MT
© 2010 Victor Company of Japan, Limited
Turn the volume off / on
DISPLAY
CH
BACK
VOL
10
11
Check what was registered.
Check what was registered.
16
15
Zoom : Change the aspect ratio
V-Scroll
Safety Precautions
• When 720p or 1080i or 1080p signal
is received, “Full” and “Slim” can be
OK
Set Up
OK
Set Up
1. Select
2. Set
12
13
> Edit
> Channel Summary
Picture
PR
ID
CH / CC
CH 02
CH 03
CH 47
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
CH / CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
16:9 Zoom
selected.
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
Zoom
Auto
Regular
OK
01
02
03
04
05
06
07
08
09
10
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
MODE
Panoramic
• In PC mode, “Regular” and “Full” can
be selected.
• If you want to set undesired channels
to be skipped, follow Channel Summary
function in Set Up menu.
• If you want to edit channel, follow Edit
function in Set Up menu.
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Yes
Yes
• Follow this manual regarding setup!
• Never insert the power cord by wet hand!
- It may cause a fatal electric shock.
• Keep the TV set away from direct sunlight!
- TV set can be damaged.
Move the picture with 3 or 4
while this bar is displayed.
14
- Connect only to a 110-240 V, 50/60Hz AC outlet.
• Make enough room for inserting and removing the power
plug!
RM-C2022
LCD
Hyper Scan :
CH
Using the TV’s Menu ---> Area - 1
• Place the TV set in a neat and dry place. Do not place the
product close to source of steam, heat, moisture or oil.
Because it may cause a fire hazard or electric shock hazard!
• Don’t touch an external metal part of the TV set!
- It may cause an electrocuted.
• Place the TV as close to the outlet as possible!
- The main power supply for this TV is controlled by inserting or removing
the power plug.
• Never cut or damage the power cord!
- If the AC plug is not the right shape, or the power cord is not long
enough, use an appropriate plug adapter or extension cable. (Consult
your retailer)
• Unplug the power cord when going out!
- The power buttons on the remote control and the TV unit cannot
completely turn off the TV. (Make appropriate arrangements for
bedridden people.)
-%.5
2 / 3 Select Main menu.
(Picture / Sound / Features / Set Up)
Press and hold
. PR changes without changing the picture screen.
Display MENU.
Once you release the button, the picture of the selected PR will appear.
Picture
5 / ∞ Select sub menu.
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Soft
2 / 3 Change setting.
When 3 is shown.
Return Plus : Return to the frequently viewed channel.
10
10
• For keep a distance from potential ignition
sources to the components or part in side TV
set, customer should install TV set with a stand
within ± 10 perpendicularly degree.
• Never dismantle the rear panel!
- It may cause an electric shock.
RETURN+
Return Plus Programmed by select the frequently viewed channel then press and hold
.
3 Display function setting.
RETURN+
Tint
Return Plus Canceled by press and hold
.
5 / ∞ Select function.
2 / 3 Change setting.
White Balance
Features
Warm
46ꢀ6)$%/
-%.5
Return : Return to the previously viewed channel.
OK
or
Exit from Menu.
Confirm after setting.
• Do not allow the TV to fall!
• Never obstruct the ventilation holes!
- Do not rest your elbows on, or allow children to hang from the TV.
- There is a risk that the TV will fall and cause injuries.
- Make use of the hole on the back of the stand to prevent
the TV from falling easily.
• Please see “Menu operation guide” at the bottom of menu on-screen.
- It may cause overheating or a fire.
• Handle LCD panel with care!
- Use a soft, dry cloth when cleaning.
Favourite channel setting.
1. Register the favourite channel
Plane
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Select the picture as you like. (Standard / Soft / Bright)
Darker <--> Brighter
Lower <--> Higher
Darker <--> Brighter
Softer <--> Sharper
On Timer
Turns on the TV from standby mode.
PR Select a channel. (01 - 99)
2. Recall the favourite channel
Favourite 1-4 ?
• Never try repair the TV yourself!
- If the problem cannot be solved in “Troubleshooting” unplug the power
cord and contact your retailer.
• If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by taking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the
television.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting
furniture.
- Not placing the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a
suitable support.
- Not standing the television on cloth or other materials placed between
the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach
the television or its controls.
On Timer Set a time. (00:00 - 12:00)
• If the TV is damaged or behaving strangely, stop
using it at once!
- Unplug the power cord and contact your retailer.
• Never place anything on the TV!
- Placing liquid, naked flames, cloths, paper, etc. on the TV may cause a
fire.
• Never expose to rain or moisture!
- To prevent fire or electric shock, never allow
liquids to enter the unit.
• Never insert objects into the cabinet
openings!
- It may cause a fatal electric shock.
- Take care when children are near.
• Hold the TV so as not to scratch the
screen!
Press number
button (1-4 only)
Press number
button (1-4 only)
Set 1-4 ?
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Channel Guard Stop children from watching specific channels.
Press and hold
Press
Lighter <--> Deeper
Reddish <--> Greenish *Only NTSC
Blue Back
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
• If the favourite channel has not been registed then “ No memory “ will
be displayed.
Tint
Programmed! will be displayed.
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR
Child Lock
Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
minutes. (Off / On)
“AAA/R03”
Batteries
• Insert the batteries
Reduces the amount of noise in original
picture. (Off / On)
WARNING:
Use two “AAA/R03” dry cell batteries.
Insert the batteries from the · end,
making sure the · and ª polarities
are correct.
If this symbol is shown,
Batteries shall not be exposed
it is only valid in the
(Blue)
Favourite Setting
Delete the favourite channel that you registered by
.
Colour Management For natural - looking pictures. (Off / On)
Picture Management Fix bright / dark pictures. (Off / On)
Dynamic Backlight
to excessive heat such as direct
European Union.
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Select an appropriate colour system.
(Auto / PAL / SECAM / NTSC 3.58 / NTSC
4.43 / PAL-M / PAL-N)
Change the aspect ratio.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
sunshine, fire or the like.
Eco Mode
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
Colour System
Auto Program Automatically registers channels.
- Do not touch the screen when carrying the TV.
• Do not carry the TV on your own!
- In order to prevent accidents, ensure that the TV
is carried by two or more people.
WARNING:
Edit / Manual Move
Move a channel position by 2 and Adjust
Zoom
by 3 / 4.
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
(Red)
ID
Edit a channel name by
Insert a channel by (Green)
.
• To prevent accidents, firmly attach the TV stands to the TV
shelf before using microphone.
• Make sure that the subwoofer is in good condition before
installing it on the TV.
- If the subwoofer has leakage current, it may damage the TV or cause
electric shock.
Insert
Stereo / I■II
Select the stereo, mono or bilingual language.
(I / II / O / m / Mono)
.
• For more details on installation, usage and safety ➔ Consult
your retailer.
Select a CH/CC by 3 / 4.
Sound Meister Set sound theme to match your listening source.
Enter number by 0-9 buttons.
(Off / Dynamic / Pure / Living)
Delete a channel by (Yellow)
.
Delete
Initial Settings
Bass
Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Expands the stereo sound naturally.
(Narrower <--> Wider)
(Blue)
(Red)
Manual
Register a new channel by
Beginning channel search by
.
and (Green)
.
Treble
Turn on the TV.
Select a language.
Select Country Area.
1
2
3
Channel fine tunning by (Yellow) and
.
(Blue)
Surround
MENU
Care when setting
Set Up
Set Up
If the picture or sound is unnatural by
for select a system.
1. Select
2. Set
1. Select
2. Set
Balance
Voice Enhancer Uses sound enhancement technology. (Off / On)
Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out Chooses to connect subwoofer. (Off / On)
Subwoofer Level Adjusts sound level of your subwoofer.
(Lower <--> Louder)
Left Stronger <--> Right Stronger
> Language
English
> Country Area
■ Power requirements
• Connect the power cord
• If the microphone is installed,
should be lock it’s cable follow
picture.
• To prevent the TV from falling thread the
belt through the hole on the back of the
stand and secure it to the TV rack.
ไทย
Area - 1
Area - 2
200 mm
Tiếng Việt
Português
Melayu
OK
OK
Language
Select your desired on screen display language.
JVC logo appears
Français
Українська
Video-2 Setting Switch between video and component signal.
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
only to a 110-240V, 50/60Hz
AC outlet.
Pусский
Castellano
• Show only when powering on for the first time.
• The power on the unit can also be used.
Hole for belt
■ Installation requirements
• To avoid overheating,
ensure the unit has ample
•
When Subwoofer Out set to On, you can adjust
Subwoofer Level.
standby mode will more than normal standby mode.
Karaoke
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Chooses to reduce the vocals.
• The select the new Country Area after Initial Setting has completed.
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
150 mm 50 mm
150 mm 50 mm
Teletext
Language
Select Teletext language group.
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
Belt
(not provided)
room.
-%.5
(Off / Mode-1 / Mode-2)
(While the cursor is pointing to Picture menu
and hold for 3 seconds.)
1
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input. (Auto / PC Position / Phase / Pixel)
(continued)
Main Volume
Microphone Volume
Adjusts volume level. (Lower <--> Louder)
Adjusts volume level of microphone.
(Lower <--> Louder)
Screw (not provided)
* Please see how to set up the TV and connection in GGT0356-001A-H.
1
2
3
Using the TV’s Menu ---> Area - 2
Useful functions (continued)
Technical information
Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Sound and Colour system in your country or region
What is “Clear SD”
Picture Mode
Backlight
Picture
Brightness
Detail
Select the picture as you like. (Standard / Soft / Bright)
Darker <--> Brighter
Lower <--> Higher
Darker <--> Brighter
Softer <--> Sharper
On Timer
Turns on the TV from standby mode.
Off
: Deactivates the function
CH
Select a channel. (Air : CH02 - CH69 ,
Cable : CC01 - CC125)
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
Eco-1
Eco-2
: Picture is darkened for the 1st level.
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
India, etc.
China, Vietnam, etc.
Hong Kong, etc.
System System
On Timer Set a time. (00:00 - 12:00)
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
: Picture is darkened for the 2nd level (more than the 1st level).
Sleep Timer
B/G
PAL
D/K
I
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
Channel Guard Stop children from watching specific channels.
Blue Back
Color
Tint
Lighter <--> Deeper
Reddish <--> Greenish *Only NTSC
Asia,
Middle
East
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Disables the side control buttons of the TV. (Off / On)
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.
- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR
Child Lock
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
B/G
M
SECAM
NTSC
SECAM
Auto Shutoff Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
minutes. (Off / On)
Reduces the amount of noise in original
picture. (Off / On)
Viewing Teletext
Watching Video or DVDs
D/K
(Blue)
No use “Clear SD”
Use “Clear SD”
Favorite Setting
Delete the favorite channel that you registered by
.
Europe
Color Management For natural - looking pictures. (Off / On)
Picture Management Fix bright / dark pictures. (Off / On)
Dynamic Backlight
Color System
Zoom
You can watch the Teletext broadcast channel with Text Functions.
B/G
I
PAL
1 Select the input source.
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode
Connect “DVI” devices
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Select an appropriate color system.
(Auto / NTSC 3.58 / PAL-M / PAL-N)
Change the aspect ratio.
AV Select
1. Select
2. Set
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
I
PAL
0
1
2
3
4
01
1
TV mode <--> TEXT mode
46ꢀ6)$%/
Video-1
Video-2
HDMI
PC
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.
OK
PAL
Auto Program Automatically registers channels.
Channel
Summary
Africa
Nigeria, etc.
(Red)
2 Select a Teletext page by press number button (0-9).
• Move up or down a page by CHANNEL +/-.
B/G
Skip
Cancel
ID
Skip the channel by
.
Egypt, Morocco, etc.
Agentina, Paraguay, Uruguay
Brazil
SECAM
PAL
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
Cancel the skip channel by (Green)
.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
N
M
• Operate the connected device and play video.
2 Select “Set Up” Menu.
(Yellow)
List Mode
: Book mark your favourite page.
South
Edit a channel name by
.
MODE
(Red) (Green) (Yellow) (Blue)
MTS
Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
America
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
Language group for Teletext
• Channels are to be skipped cannot be selected by
the CHANNEL - / + button.
• The skip can be set to all channels of Air (CH02 -
CH69) and Cable (CC01 - CC125).
Select your desired on screen display language.
for select to save
save
M
NTSC
Press number button
for enter the number
of page.
HDMI setting
: Setting for HDMI input.
Sound Meister Set sound theme to match your listening source.
Group
Languages
(Off / Dynamic / Pure / Living)
Size
: Auto / 1 / 2
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Greek, Swedish, Finnish
Bass
Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Expands the stereo sound naturally.
(Narrower <--> Wider)
If wrong screen size appears in 480p (525p),
change to “1” or “2”.
Language
• Recall your favourite page by press the colour button.
PC Signals that can be displayed
Video-2 Setting Switch between video and component signal.
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
German, French
Treble
Hold
: Hold the current page.
• Cancel by press this button again.
(Video / Component)
• If the signal doesn’t appear, check that the vertical frequency on the PC is
set to “60Hz”.
Audio
: Auto / Digital / Analogue
Rocket Start TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
standby mode will more than normal standby mode.
Closed Caption Select the desired caption or text channel.
If no sound, change to “ Analogue “ or “ Digital”.
Surround
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Reveal
: Display hidden information.
• example : answer to a quiz, etc
PC Setting
Auto
: Setting for PC input.
Resolution
640 x 480 (VGA) / 1024 x 768 (XGA)
60.0
Balance
Voice Enhancer Uses sound enhancement technology. (Off / On)
Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out Chooses to connect subwoofer. (Off / On)
Subwoofer Level Adjusts sound level of your subwoofer.
Left Stronger <--> Right Stronger
: Automatic adjust by 2.
Vertical frequency
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Size
: Double the size of the displayed text.
Closed
Caption
Caption
Select to view close caption or text
information. (Off / CC / Text)
Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Select the desired text channel.
(T1 / T2 / T3 / T4)
PC Position
: Adjust screen position by 3 / 4.
* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)
Index
Cancel
: Returns to page “100” or a previously designated page.
OK
And set by
.
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,
Finnish
:
Leave the current page open, while you switch to watch TV.
Phase
Pixel
: Sets the focus of screen.
• Useful when running a page search.
(Lower <--> Louder)
Text
: Adjusts the horizontal feature of screen.
• If the characters are unreadable. ➡ Select different Teletext language
•
When Subwoofer Out set to On, you can adjust
Subwoofer Level.
Sub-page
: Display the number of Sub-page.
group.
• Closed Caption is not available for component
signal.
• Cancel by press this button again.
Karaoke
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Chooses to reduce the vocals.
(Off / Mode-1 / Mode-2)
Adjusts volume level. (Lower <--> Louder)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
Specification
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Main Volume
Microphone Volume Adjusts volume level of microphone.
* Please see CH/CC List in GGT0356-001A-H.
Main unit
Terminals / Connectors
(Lower <--> Louder)
Poor picture quality
Unnatural colour >>
Severe noise or snow
Area-1 B / G / I / D / K / M / N
Broadcasting systems
Terminal name
Terminal type
Signal type (IN)
Adjust “Colour” and “Backlight”.
Check “Colour System”. If “Auto” is selected.
Select the specific colour system manually.
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Useful functions
Area-2 M / N
VIDEO-1
RCA connectors x 3 Composite video, Audio L/R
RCA connectors x 5 Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
PAL-M / PAL-N
Colour systems
Channel Guard : Stop children from watching specific channels. Karaoke : You can enjoy to reduce the vocals for your own karaoke.
Poor sound
Adjust the “Bass” and “Treble”.
Patterns, stripes or noise
Area-2 NTSC 3.58 / PAL-M / PAL-N
1 Select “Channel Guard”
1 Select “Karaoke”
VHF low channel (VL) = 46.25 to 140.25 MHz
Area-1 VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Interference caused by devices such as an amplifier, personal computer,
or a hair drier, Move it away from TV.
VIDEO-2
■
If receiving a poor signal in “Stereo/I II” switch to “Mono”.
Adjust the channel reception using “Manual”.
For HDMI signal, wrong screen size.
Switch “Size” in “HDMI Setting” to “1” or “2”.
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an “HDMI” device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUTPUT terminal.
Subwoofer, No sound
May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.
Feedback sound symptoms
1. Select a number
1. Select
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
Features
Sound
0
Ghosting (Doubling of images)
> Set ID No.
Karaoke
OK
OK
2. To the next column
3. Set
2. Adjust
3. Finish
Channels and
frequencies
VHF low channel (VL) = 55.25 to 127.25 MHz
Area-2 VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Karaoke
Main Volume
Microphone Volume
Off
0
0
0
0
Interference occurs caused by signal reflection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
Input
Cannot turn it on
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
NICAM (I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
HDMI
terminals
Chooses to reduce the vocals.
Off : Normal sound of song
Mode-1 : Only sound of music
Mode-2 : To sing, accompanying with sound of song
• Karaoke function works only for stereo sound system.
• If using Karaoke disc, users must choose to remove the
vocals from the player.
Karaoke
2 Select a channel and lock it ( : locked)
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
Sound-multiplex
systems
Lock / Release
PC INPUT
HDMI Analog /
DVI Analog / PC RCA connectors x 2 Audio L / R
Audio
D-SUB (15 pins) x 1 Analogue PC signal
1. Select a
channel
Features
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
(Blue)
>> Channel Guard
Teletext systems
Power requirements
Audio output
FLOF (Fastext), WST (World System Teletext)
AC 110 V - 240 V, 50/60Hz
PR
01
02
03
04
05
06
07
08
09
10
ID
CH / CC
CH 02
CH 05
CH 47
CH 09
CH 11
CH 07
OK
SAT
– – – – – –
BBC
IEEE
APL
Remote control stops working
6 W + 6 W
DANY
(Rated power output)
mini-jack x 1
(3.5 mm in
diameter)
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch “Child Lock” to “Off”.
Main Volume
Adjusts volume level. (Lower <---> Louder)
Speakers
(4 cm x 16 cm) x 2
Microphone
Microphone input
Microphone Volume Adjusts volume level of microphone.
(Lower <---> Louder)
• Microphone Volume is available when plug in microphone.
• Microphone to be used with the “Karaoke” function of JVC must
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;
otherwise, noise will result.
Power consumption
[standby]
[“Rocket Start” mode
standby]
• View a locked channel by use the numerical buttons to enter the channel
number. When appeare, press “Display” button and enter your “ID No.”
105 W
[0.7 W]
[16 W]
• HDMI Analog / DVI Analog / PC Audio use terminal common with
VIDEO-2.
• We may change the design and specifications without notice.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Aspect ratio changed unintentionally
ZOOM
Subwoofer out : You can enjoy subwoofer sound from Subwoofer out.
1 Select “Subwoofer Out”
Press “ ” button to return to your settings.
Screen size
PC screen alignment is off
(visible area size
measured diagonally)
Dimensions
(W x H x D: mm)
[without stand]
Weights
80 cm
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
Freeze : Take snapshots of the screen.
Sound
1. Select
791.8 x 571.7 x 203.5
[791.8 x 520.5 x 103.9]
Stereo / I II
Sound Meister
Balance
Voice Enhancer
AI Volume
I II
Mono
Cancel
OK
OK
2. Adjust
3. Finish
1
Strange picture when using an external device
Off
Off
On
15 kg
[12 kg]
OK
Press “
” again,
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
Subwoofer Out
Subwoofer Level
Karaoke
[without stand]
or change the
channel.
Freeze
Power cord x 1
Keep the microphone away from the TV’s speakers.
Echo
Lower the sound level in “Microphone Volume” in order to prevent the echo.
still picture
You cannot save or export the snapshot.
Freeze function is not available for HDMI, PC and Component signal.
Remote control unit : RM-C2022 x 1
AAA/R03 dry cell battery x 2
Screw x 8
Chooses to connect subwoofer. (Off / On)
• When Subwoofer Out set to On, you can adjust Subwoofer Level.
• Subwoofer to be used must have a built-in amplifier.
Accessories
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
|