JVC Flat Panel Television 0610GLT NF MT User Manual

ENGLISH  
WIDE LCD PANEL TV INSTRUCTIONS  
LT-32A1  
GGT0353-001A-H  
0610GLT-NF-MT  
© 2010 Victor Company of Japan, Limited  
Safety Precautions  
Thank you for buying this JVC LCD panel television.  
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.  
• Follow this manual regarding setup!  
• Never insert the power cord by wet hand!  
- It may cause a fatal electric shock.  
• Keep the TV set away from direct sunlight!  
- TV set can be damaged.  
- Connect only to a 110-240 V, 50/60Hz AC outlet.  
• Make enough room for inserting and removing the power  
plug!  
• Place the TV set in a neat and dry place. Do not place the  
product close to source of steam, heat, moisture or oil.  
Because it may cause a re hazard or electric shock hazard!  
• Don’t touch an external metal part of the TV set!  
- It may cause an electrocuted.  
• Place the TV as close to the outlet as possible!  
- The main power supply for this TV is controlled by inserting or removing  
the power plug.  
• Never cut or damage the power cord!  
- If the AC plug is not the right shape, or the power cord is not long  
enough, use an appropriate plug adapter or extension cable. (Consult  
your retailer)  
• Unplug the power cord when going out!  
- The power buttons on the remote control and the TV unit cannot  
completely turn off the TV. (Make appropriate arrangements for  
bedridden people.)  
10  
10  
• For keep a distance from potential ignition  
sources to the components or part in side TV  
set, customer should install TV set with a stand  
within ± 10 perpendicularly degree.  
• Never dismantle the rear panel!  
- It may cause an electric shock.  
• Do not allow the TV to fall!  
• Never obstruct the ventilation holes!  
- Do not rest your elbows on, or allow children to hang from the TV.  
- There is a risk that the TV will fall and cause injuries.  
- Make use of the hole on the back of the stand to prevent  
the TV from falling easily.  
- It may cause overheating or a re.  
• Handle LCD panel with care!  
- Use a soft, dry cloth when cleaning.  
Plane  
• Never try repair the TV yourself!  
- If the problem cannot be solved in “Troubleshooting” unplug the power  
cord and contact your retailer.  
• If a television is not positioned in a sufciently stable  
location, it can be potentially hazardous due to falling. Many  
injuries, particularly to children, can be avoided by taking  
simple precautions such as:  
- Using cabinets or stands recommended by the manufacturer of the  
television.  
• If the TV is damaged or behaving strangely, stop  
using it at once!  
- Unplug the power cord and contact your retailer.  
• Never place anything on the TV!  
- Placing liquid, naked ames, cloths, paper, etc. on the TV may cause a  
re.  
• Never expose to rain or moisture!  
- To prevent re or electric shock, never allow  
liquids to enter the unit.  
- Only using furniture that can safely support the television.  
- Ensuring the television is not overhanging the edge of the supporting  
furniture.  
- Not placing the television on tall furniture (for example, cupboards or  
bookcases) without anchoring both the furniture and the television to a  
suitable support.  
- Not standing the television on cloth or other materials placed between  
the television and supporting furniture.  
- Educating children about the dangers of climbing on furniture to reach  
the television or its controls.  
• To prevent accidents, rmly attach the TV stands to the TV  
shelf before using microphone.  
• Make sure that the subwoofer is in good condition before  
installing it on the TV.  
- If the subwoofer has leakage current, it may damage the TV or cause  
electric shock.  
• Never insert objects into the cabinet  
openings!  
- It may cause a fatal electric shock.  
- Take care when children are near.  
• Hold the TV so as not to scratch the  
screen!  
- Do not touch the screen when carrying the TV.  
• Do not carry the TV on your own!  
- In order to prevent accidents, ensure that the TV  
is carried by two or more people.  
• For more details on installation, usage and safety Consult  
your retailer.  
Care when setting  
Power requirements  
• Connect the power cord  
• If the microphone is installed,  
should be lock it’s cable follow  
picture.  
To prevent the TV from falling thread the  
belt through the hole on the back of the  
stand and secure it to the TV rack.  
200 mm  
only to a 110-240V, 50/60Hz  
AC outlet.  
Installation requirements  
To avoid overheating,  
ensure the unit has ample  
Hole for belt  
150 mm 50 mm  
150 mm 50 mm  
Belt  
(not provided)  
room.  
Screw (not provided)  
* Please see how to set up the TV and connection in GGT0356-001A-H.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Initial Settings (continued)  
If you select Country Area to “Area-1”  
If you select Country Area to “Area-2”  
Select the teletext language group.  
Select Air or Cable.  
1. Select  
4
4
Set Up  
Set Up  
1. Select  
OK  
> Teletext Language  
> Auto Program  
OK  
Group-1  
Group-2  
Group-3  
Group-4  
Group-5  
Air  
Cable  
2. Set  
Automatically register channels (Auto Program).  
Searching for the channels (Auto Program)  
5
6
5
6
Set Up  
Set Up  
OK  
> Auto Program  
>> Auto Program  
CH 40  
CH 40  
5%  
5%  
Check what was registered.  
Check what was registered.  
OK  
Set Up  
OK  
Set Up  
> Edit  
> Channel Summary  
PR  
ID  
CH / CC  
CH 02  
CH 03  
CH 47  
CH 76  
CH 12  
CH 09  
CH 05  
CH 02  
CH 15  
CH 28  
CH / CC  
CH 02  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
ID  
Skip  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
– – – – – –  
– – – – – –  
B B C A B C  
A B C D E F  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
B B C A B C  
A B C D E F  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
– – – – – –  
• If you want to set undesired channels  
to be skiped, follow Channel Summary  
function in Set Up menu.  
• If you want to edit channel, follow Edit  
function in Set Up menu.  
Yes  
Yes  
Using the TV’s Menu ---> Area - 1  
-%.5  
2 / 3 Select Main menu.  
(Picture / Sound / Features / Set Up)  
Display MENU.  
Picture  
5 / Select sub menu.  
Picture Mode  
Backlight  
Contrast  
Brightness  
Sharpness  
Colour  
Tint  
White Balance  
Features  
Soft  
2 / 3 Change setting.  
When 3 is shown.  
3 Display function setting.  
5 / Select function.  
2 / 3 Change setting.  
Warm  
46ꢀ6)$%/  
-%.5  
OK  
or  
Exit from Menu.  
Conrm after setting.  
• Please see “Menu operation guide” at the bottom of menu on-screen.  
Picture Mode  
Backlight  
Contrast  
Brightness  
Sharpness  
Colour  
Select the picture as you like. (Standard / Soft / Bright)  
Darker <--> Brighter  
Lower <--> Higher  
Darker <--> Brighter  
Softer <--> Sharper  
On Timer  
Turns on the TV from standby mode.  
PR Select a channel. (01 - 99)  
On Timer Set a time. (00:00 - 12:00)  
Sleep Timer  
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)  
Channel Guard Stop children from watching specic channels.  
Blue Back  
Lighter <--> Deeper  
Reddish <--> Greenish *Only NTSC  
Display a blue screen and mute the sound when the  
signal is weak or absent. (Off / On)  
Tint  
White Balance Select the white balance of the picture. (Cool / Mid / Warm)  
Features Finer picture adjustment  
Clear SD For clearly picture (Off / Mode-1 / Mode-2)  
Digital VNR  
Child Lock  
Disables the side control buttons of the TV. (Off / On)  
Auto Shutoff Set the power to turn off if no TV singnal (RF) is  
received and no operation is performed for about 15  
Reduces the amout of noise in original  
picture. (Off / On)  
minutes. (Off / On)  
(Blue)  
Favourite Setting  
Delete the favourite channel that you registered by  
.
Colour Management For natural - looking pictures. (Off / On)  
Picture Management Fix bright / dark pictures. (Off / On)  
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)  
Eco Mode  
Dynamic Backlight  
Reduces the brightness of the backlight  
when the screen is dark. (Off / On)  
Select an appropriate colour system.  
(Auto / PAL / SECAM / NTSC 3.58 / NTSC  
4.43 / PAL-M / PAL-N)  
Adjust picture contrast to match your room brightness.  
(Off / Eco-1 / Eco-2 / Max-Eco)  
Colour System  
Auto Program Automatically registers channels.  
Edit / Manual Move  
Move a channel position by 2 and Adjust  
Zoom  
Change the aspect ratio.  
(Auto / Regular / Panoramic /14:9 Zoom /  
16:9 Zoom / 16:9 Zoom Subtitle / Full)  
by 3 / 4.  
(Red)  
ID  
Edit a channel name by  
.
Insert a channel by (Green)  
.
Insert  
Stereo / III  
Select the stereo, mono or bilingual language.  
(I / II / O / m / Mono)  
Select a CH/CC by 3 / 4.  
Sound Meister Set sound theme to match your listening source.  
Enter number by 0-9 buttons.  
(Off / Dynamic / Pure / Living)  
Delete a channel by (Yellow)  
.
Delete  
Bass  
Compensates low frequencies to widen the  
frequency band. (Weaker <--> Stronger)  
Compensates high frequencies to widen the  
frequency band. (Weaker <--> Stronger)  
Expands the stereo sound naturally.  
(Narrower <--> Wider)  
(Blue)  
(Red)  
Manual  
Register a new channel by  
Beginning channel search by  
.
and (Green)  
.
Treble  
Channel ne tunning by (Yellow) and  
.
(Blue)  
Surround  
If the picture or sound is unnatural by  
for select a system.  
Select your desired on screen display language.  
Balance  
Voice Enhancer Uses sound enhancement technology. (Off / On)  
Al Volume Prevent sudden increase or decrease of sound. (Off / On)  
Left Stronger <--> Right Stronger  
Language  
Subwoofer Out Chooses to connect subwoofer. (Off / On)  
Subwoofer Level Adjusts sound level of your subwoofer.  
(Lower <--> Louder)  
Video-2 Setting Switch between video and component signal.  
(Video / Component)  
Rocket Start TV can turn on quickly. (Off / On)  
• When Rocket Start is On, power consumption at  
When Subwoofer Out set to On, you can adjust  
Subwoofer Level.  
standby mode will more than normal standby mode.  
Select Teletext language group.  
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)  
Karaoke  
Karaoke  
You can enjoy to reduce the vocals for your own karaoke.  
Chooses to reduce the vocals.  
Teletext  
Language  
(Off / Mode-1 / Mode-2)  
HDMI Setting Setting for HDMI input. (Size / Audio)  
PC Setting Setting for PC input. (Auto / PC Position / Phase / Pixel)  
(continued)  
Main Volume  
Microphone Volume  
Adjusts volume level. (Lower <--> Louder)  
Adjusts volume level of microphone.  
(Lower <--> Louder)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Using the TV’s Menu ---> Area - 2  
Picture Mode  
Backlight  
Picture  
Brightness  
Detail  
Select the picture as you like. (Standard / Soft / Bright)  
Darker <--> Brighter  
Lower <--> Higher  
Darker <--> Brighter  
Softer <--> Sharper  
On Timer  
Turns on the TV from standby mode.  
CH Select a channel. (Air : CH02 - CH69 ,  
Cable : CC01 - CC125)  
On Timer Set a time. (00:00 - 12:00)  
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)  
Sleep Timer  
Channel Guard Stop children from watching specic channels.  
Blue Back  
Color  
Tint  
Lighter <--> Deeper  
Reddish <--> Greenish *Only NTSC  
Display a blue screen and mute the sound when the  
signal is weak or absent. (Off / On)  
Disables the side control buttons of the TV. (Off / On)  
White Balance Select the white balance of the picture. (Cool / Mid / Warm)  
Features Finer picture adjustment  
Clear SD For clearly picture (Off / Mode-1 / Mode-2)  
Digital VNR  
Child Lock  
Auto Shutoff Set the power to turn off if no TV singnal (RF) is  
received and no operation is performed for about 15  
Reduces the amout of noise in original  
picture. (Off / On)  
minutes. (Off / On)  
(Blue)  
Favorite Setting  
Delete the favorite channel that you registered by  
.
Color Management For natural - looking pictures. (Off / On)  
Picture Management Fix bright / dark pictures. (Off / On)  
Dynamic Backlight  
Color System  
Zoom  
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)  
Eco Mode  
Adjust picture contrast to match your room brightness.  
(Off / Eco-1 / Eco-2 / Max-Eco)  
Reduces the brightness of the backlight  
when the screen is dark. (Off / On)  
Select an appropriate color system.  
(Auto / NTSC 3.58 / PAL-M / PAL-N)  
Change the aspect ratio.  
Auto Program Automatically registers channels.  
Channel  
Summary  
(Red)  
Skip  
Cancel  
ID  
Skip the channel by  
.
Cancel the skip channel by (Green)  
.
(Auto / Regular / Panoramic /14:9 Zoom /  
16:9 Zoom / 16:9 Zoom Subtitle / Full)  
(Yellow)  
Edit a channel name by  
.
MTS  
Select the stereo and SAP broadcasted programs.  
(Stereo / SAP / Mono)  
• Channels are to be skipped cannot be selected by  
the CHANNEL - / + button.  
• The skip can be set to all channels of Air (CH02 -  
CH69) and Cable (CC01 - CC125).  
Select your desired on screen display language.  
Sound Meister Set sound theme to match your listening source.  
(Off / Dynamic / Pure / Living)  
Bass  
Compensates low frequencies to widen the  
frequency band. (Weaker <--> Stronger)  
Compensates high frequencies to widen the  
frequency band. (Weaker <--> Stronger)  
Expands the stereo sound naturally.  
(Narrower <--> Wider)  
Language  
Video-2 Setting Switch between video and component signal.  
Treble  
(Video / Component)  
Rocket Start TV can turn on quickly. (Off / On)  
• When Rocket Start is On, power consumption at  
standby mode will more than normal standby mode.  
Closed Caption Select the desired caption or text channel.  
Surround  
Balance  
Voice Enhancer Uses sound enhancement technology. (Off / On)  
Al Volume Prevent sudden increase or decrease of sound. (Off / On)  
Subwoofer Out Chooses to connect subwoofer. (Off / On)  
Subwoofer Level Adjusts sound level of your subwoofer.  
Left Stronger <--> Right Stronger  
Closed  
Caption  
Caption  
Select to view close caption or text  
information. (Off / CC / Text)  
Select the desired caption.  
(CC1 / CC2 / CC3 / CC4)  
Select the desired text channel.  
(T1 / T2 / T3 / T4)  
(Lower <--> Louder)  
Text  
When Subwoofer Out set to On, you can adjust  
Subwoofer Level.  
• Closed Caption is not available for component  
signal.  
Karaoke  
Karaoke  
You can enjoy to reduce the vocals for your own karaoke.  
Chooses to reduce the vocals.  
(Off / Mode-1 / Mode-2)  
Adjusts volume level. (Lower <--> Louder)  
HDMI Setting Setting for HDMI input. (Size / Audio)  
PC Setting  
Setting for PC input.  
(Auto / PC Position / Phase / Pixel)  
Main Volume  
Microphone Volume Adjusts volume level of microphone.  
* Please see CH/CC List in GGT0356-001A-H.  
(Lower <--> Louder)  
Useful functions  
Channel Guard : Stop children from watching specic channels. Karaoke : You can enjoy to reduce the vocals for your own karaoke.  
1 Select “Channel Guard”  
1 Select “Karaoke”  
1. Select a number  
1. Select  
Features  
Sound  
0
> Set ID No.  
Karaoke  
OK  
OK  
2. To the next column  
3. Set  
2. Adjust  
3. Finish  
Karaoke  
Main Volume  
Microphone Volume  
Off  
0
0
0
0
Chooses to reduce the vocals.  
Off : Normal sound of song  
Mode-1 : Only sound of music  
Mode-2 : To sing, accompanying with sound of song  
• Karaoke function works only for stereo sound system.  
• If using Karaoke disc, users must choose to remove the  
vocals from the player.  
Karaoke  
2 Select a channel and lock it ( : locked)  
Lock / Release  
1. Select a  
channel  
Features  
(Blue)  
>> Channel Guard  
PR  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
ID  
CH / CC  
CH 02  
CH 05  
CH 47  
CH 09  
CH 11  
CH 07  
OK  
SAT  
– – – – – –  
BBC  
IEEE  
APL  
DANY  
Main Volume  
Adjusts volume level. (Lower <---> Louder)  
Microphone Volume Adjusts volume level of microphone.  
(Lower <---> Louder)  
• Micophone Volume is available when plug in microphone.  
• Microphone to be used with the “Karaoke” function of JVC must  
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;  
otherwise, noise will result.  
• View a locked channel by use the numerical buttons to enter the channel  
number. When appeare, press “Display” button and enter your “ID No.”  
Subwoofer out : You can enjoy subwoofer sound from Subwoofer out.  
1 Select “Subwoofer Out”  
Freeze : Take snapshots of the screen.  
Sound  
1. Select  
Stereo / I II  
Sound Meister  
Balance  
Voice Enhancer  
AI Volume  
I II  
Mono  
Cancel  
OK  
OK  
2. Adjust  
3. Finish  
1
Off  
Off  
On  
OK  
Press “  
” again,  
Subwoofer Out  
Subwoofer Level  
Karaoke  
or change the  
channel.  
Freeze  
still picture  
You cannot save or export the snapshot.  
Freeze function is not available for HDMI, PC and Component signal.  
Chooses to connect subwoofer. (Off / On)  
• When Subwoofer Out set to On, you can adjust Subwoofer Level.  
• Subwoofer to be used must have a built-in amplier.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Useful functions (continued)  
Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.  
Off  
: Deactivates the function  
Eco-1  
Eco-2  
: Picture is darkened for the 1st level.  
: Picture is darkened for the 2nd level (more than the 1st level).  
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house  
works at the same time).  
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.  
- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.  
- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”  
Viewing Teletext  
Watching Video or DVDs  
You can watch the Teletext broadcast channel with Text Functions.  
1 Select the input source.  
AV Select  
1. Select  
2. Set  
0
1
2
3
4
01  
1
TV mode <--> TEXT mode  
46ꢀ6)$%/  
Video-1  
Video-2  
HDMI  
PC  
OK  
2 Select a Teletext page by press number button (0-9).  
• Move up or down a page by CHANNEL +/-.  
• Operate the connected device and play video.  
List Mode  
: Book mark your favourite page.  
MODE  
(Red) (Green) (Yellow) (Blue)  
2 Select “Set Up” Menu.  
for select to save  
save  
Press number button  
for enter the number  
of page.  
HDMI setting  
Size  
: Setting for HDMI input.  
: Auto / 1 / 2  
If wrong screen size appears in 480p (525p),  
change to “1” or “2”.  
• Recall your favourite page by press the colour button.  
Hold  
: Hold the current page.  
• Cancel by press this button again.  
Audio  
: Auto / Digital / Analogue  
If no sound, change to “ Analogue “ or “ Digital”.  
Reveal  
: Display hidden information.  
• example : answer to a quiz, etc  
PC Setting  
Auto  
: Setting for PC input.  
: Automatic adjust by 2.  
Size  
: Double the size of the displayed text.  
PC Position  
: Adjust screen position by 3 / 4.  
Index  
Cancel  
: Returns to page “100” or a previously designated page.  
OK  
And set by  
.
:
Leave the current page open, while you switch to watch TV.  
• Useful when running a page search.  
Phase  
Pixel  
: Sets the focus of screen.  
: Adjusts the horizontal feature of screen.  
Sub-page  
: Display the number of Sub-page.  
• Cancel by press this button again.  
Troubleshooting  
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.  
Poor picture quality  
Severe noise or snow  
Unnatural colour >>  
Adjust “Colour” and “Backlight”.  
Check “Colour System”. If “Auto” is selected.  
Select the specic colour system manually.  
Check the aerial cable and TV connections .  
Check the direction of the aerial.  
Check the aerial or its cable damaged or not.  
Poor sound  
Patterns, stripes or noise  
Adjust the “Bass” and “Treble”.  
Interference caused by devices such as an amplier, personal computer,  
or a hair drier, Move it away from TV.  
If receiving a poor signal in “Stereo/I II” switch to “Mono”.  
Adjust the channel reception using “Manual”.  
For HDMI signal, wrong screen size.  
Switch “Size” in “HDMI Setting” to “1” or “2”.  
For HDMI signal, green and distorted screen  
Wait a little for the signal to stabilize when switching the signal format for  
an “HDMI” device.  
For HDMI signal, No picture / No sound  
Use the cable marked with HDMI logo.  
Check if the device is compliant with HDMI.  
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or  
“Analogue” or “Auto” for DVI devices.  
Ghosting (Doubling of images)  
Interference occurs caused by signal reection from mountains or building.  
Try to adjust the aerial’s direction or use another antenna.  
Cannot turn it on  
Ensure the power cord is connected to the AC outlet correctly.  
Cannot operate the remote control.  
The batteries may be exhausted. Replace with new batteries.  
Ensure that you are operation the remote control at less than 7 meters  
from the front of your TV.  
Remote control stops working  
Unplug TV, several minutes later plug it in again.  
Side control buttons do not work  
Switch “Child Lock” to “Off”.  
Some functions do not work.  
It is not a malfunction. Some functions (dark background) in the menu do  
not work depending on the situation.  
Black or white dots appear on the screen.  
LCD panels use ne dots (“pixels”) to display images. While more than  
99.99% of these pixels function properly, a very small number of pixels  
may not light, or may light all the time. It is not a malfunction.  
No picture, No sound  
Aspect ratio changed unintentionally  
ZOOM  
Press “ ” button to return to your settings.  
PC screen alignment is off  
Adjust the “PC Position” in “PC Setting” of Set Up menu.  
Blue screen appears on the screen  
Switch “Blue Back” to “Off”.  
Some input do not output from OUTPUT terminal.  
Subwoofer, No sound  
Strange picture when using an external device  
May be signal source is not low frequency bass signal.  
Check subwoofer cable connected correctly.  
Feedback sound symptoms  
Keep the microphone away from the TV’s speakers.  
Echo  
If the top of the image is distorted, check the video signal quality itself.  
If movement appears unnatural when receiving a signal from a DVD  
player, etc. with 625p (progressive-scanning), change the output setting of  
the external device to 625i (interlace-scanning).  
Lower the sound level in “Microphone Volume” in order to prevent the echo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Technical information  
Sound and Colour system in your country or region  
What is “Clear SD”  
LCD picture is unstable due to a large number of signal noise. Such noise  
appears extensively especially when an LCD displays SD signals. Clear SD  
mode resolves disadvantage for better picture quality.  
Area  
Country or Region  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
Yemen, Indonesia, Malaysia, Singapore, Thailand,  
India, etc.  
China, Vietnam, etc.  
Hong Kong, etc.  
System System  
B/G  
PAL  
D/K  
I
Asia,  
Middle  
East  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
B/G  
M
SECAM  
NTSC  
SECAM  
D/K  
No use “Clear SD”  
Use “Clear SD”  
Europe  
B/G  
I
PAL  
Connect “DVI” devices  
Oceania Australia, New Zealand, etc.  
Republic of South Africa, etc.  
B/G  
I
PAL  
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.  
Connect analogue sound output of the DVI device to L and R terminals in  
INPUT VIDEO-2.  
PAL  
Africa  
Nigeria, etc.  
B/G  
Egypt, Morocco, etc.  
Agentina, Paraguay, Uruguay  
Brazil  
SECAM  
PAL  
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.  
N
M
South  
America  
Chile, Peru, Bolivia, Colombia, Venezuela,  
Ecuador, etc.  
Language group for Teletext  
M
NTSC  
Group  
Languages  
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,  
Portuguese, Greek, Swedish, Finnish  
PC Signals that can be displayed  
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,  
German, French  
• If the signal doesn’t appear, check that the vertical frequency on the PC is  
set to “60Hz”.  
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,  
Serbian, Croatian, Slovenian, Czech, Slovak, English, German  
Resolution  
640 x 480 (VGA) / 1024 x 768 (XGA)  
60.0  
Vertical frequency  
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,  
Portuguese, Swedish, Finnish  
* Machintosh* computers are not supported.  
(Machintosh is a registered trademark of Apple Computer, Inc.)  
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,  
Finnish  
• If the characters are unreadable. Select different Teletext language  
group.  
Specication  
Main unit  
Terminals / Connectors  
Area-1 B / G / I / D / K / M / N  
Broadcasting systems  
Terminal name  
Terminal type  
Signal type (IN)  
Area-2 M / N  
VIDEO-1  
RCA connectors x 3 Composite video, Audio L/R  
RCA connectors x 5 Composite video, Analogue  
component 480i (525i) / 576i (625i),  
Progressive : 480p (525p) / 576p  
(625p),  
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /  
PAL-M / PAL-N  
Colour systems  
Area-2 NTSC 3.58 / PAL-M / PAL-N  
VHF low channel (VL) = 46.25 to 140.25 MHz  
Area-1 VHF high channel (VH) = 147.25 to 423.25 MHz  
UHF channel (U) = 431.25 to 863.25 MHz  
VHF low channel (VL) = 55.25 to 127.25 MHz  
Area-2 VHF high channel (VH) = 133.25 to 361.25 MHz  
UHF channel (U) = 367.25 to 801.25 MHz  
Receives cable channels in mid band (X to Z+2, S1 to S10),  
super band (S11 to S20) and hyper band (S21 to S41)  
NICAM (I / B / G / D / K ), A2 (B / G / D / K)  
MTS (Multi-channel Television Sound)  
FLOF (Fastext), WST (World System Teletext)  
AC 110 V - 240 V, 50/60Hz  
VIDEO-2  
HD : 720p (750p) / 1080i (1125i) /  
1080p (1125p)  
Audio L/R  
Channels and  
frequencies  
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /  
576i (625i) / 576p (625p) / 720p  
(750p) / 1080i (1125i) / 1080p  
(1125p)  
Input  
HDMI  
terminals  
Sound-multiplex  
systems  
Teletext systems  
Power requirements  
Audio output  
PC INPUT  
HDMI Analog /  
DVI Analog / PC RCA connectors x 2 Audio L / R  
Audio  
D-SUB (15 pins) x 1 Analogue PC signal  
6 W + 6 W  
(Rated power output)  
mini-jack x 1  
Speakers  
Power consumption  
[standby]  
[“Rocket Start” mode  
standby]  
Screen size  
(visible area size  
measured diagonally)  
Dimensions  
(W x H x D: mm)  
[without stand]  
Weights  
(4 cm x 16 cm) x 2  
Microphone  
(3.5 mm in  
diameter)  
Microphone input  
105 W  
[0.7 W]  
[16 W]  
• HDMI Analog / DVI Analog / PC Audio use terminal common with  
VIDEO-2.  
• We may change the design and specications without notice.  
• HDMI, the HDMI Logo, and High-Denition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC in the United  
States and other countries.  
80 cm  
791.8 x 571.7 x 203.5  
[791.8 x 520.5 x 103.9]  
15 kg  
[12 kg]  
[without stand]  
Power cord x 1  
Remote control unit : RM-C2022 x 1  
AAA/R03 dry cell battery x 2  
Screw x 8  
Accessories  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6

JVC Car Speaker CS ARS500 User Manual
JVC DVD Player XV N320B User Manual
JVC Home Theater System LVT0858 001A User Manual
Kenwood Marine Radio TKR 740 User Manual
Kicker Stereo Amplifier KX2004 User Manual
Kidde Smoke Alarm 0976 User Manual
KitchenAid Blender 5 SPEED ULTRA POWER BLENDER User Manual
KitchenAid Frozen Dessert Maker 165 User Manual
KitchenAid Ice Maker KUIC15PRTS1 User Manual
Kompernass Hair Clippers KH 654 User Manual