JVC Flat Panel Television 0508TSH II IM User Manual
LCD Television Users Guide  
42" class (42" Diagonal)  
LT-42X899  
47" class (46.9" Diagonal)  
52" class (52" Diagonal)  
LT-47X899  
LT-52X899  
1080p HDTV  
POWER  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
1
4
2
5
8
0
3
6
9
7
RETURN  
+
TUNE  
TV  
–
CH  
+
–
VOL +  
MUTING  
LIGHT  
OK  
DVR  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
RM-C1430  
TV  
Important Note:  
In the spaces below, enter the model and serial number of your television (located at the  
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this  
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton  
and original packaging for future use.  
Serial Number:  
LCT2403-002A-A  
0508TSH-II-IM  
Model Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: To reduce the risk of electric shock. Do not  
remove cover (or back). No user serviceable  
parts inside. Refer servicing to qualified service  
personnel.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle is intended to alert the user to the  
presence of uninsulated “dangerous voltage” within  
the product’s enclosure that may be of sufficient  
magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS  
APPARATUS TO RAIN OR MOISTURE.  
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES  
REGARDING THE USE OF THIS UNIT.  
1. Operate only from the power source specified on the unit.  
2. Avoid damaging the AC plug and power cord.  
3. Avoid improper installation and never position the unit where good ventilation is unattainable.  
4. Do not allow objects or liquid into the cabinet openings.  
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair  
it yourself or remove the rear cover.  
Changes or modifications not approved by JVC could void the warranty.  
* When you don’t use this TV set for a long period of time, be sure to disconnect both the  
power plug from the AC outlet and antenna for your safety.  
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or  
other outlet unless the blades can be fully inserted to prevent blade exposure.  
®
• As an “ENERGY STAR ” partner,  
JVC has determined that this  
product or product model meets the  
®
“ENERGY STAR ” guidelines for energy  
efficiency.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
IMPORTANT RECYCLING INFORMATION  
This product has a fluorescent lamp that contains mercury. Disposal  
of these materials may be regulated in your community due to  
environmental considerations. For disposal or recycling information,  
please contact your local authorities or for USA, the Electronic Industries  
Alliance: http://www.eiae.org  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury  
from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
16) Place the television on a stable, flat surface. Failure to do so can result in the television  
falling, causing injury.  
17) DO NOT allow young children to play around or on the television. Do not hang from the  
TV. Failure to do so can result in the television falling, causing injury.  
18) DO NOT allow young children to play with the plastic bag that came with the television  
when you unpacked it. Failure to do so can result in suffocation, causing injury.  
19) Avoid improper installation and never position the unit where good ventilation is impossible.  
When installing this TV, distance recommendations must be maintained between the set  
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the  
minimum distance guidelines shown for safe operation.  
200 mm  
7 7/8 in  
200 mm  
7 7/8 in  
150 mm  
5 7/8 in  
150 mm  
5 7/8 in  
50 mm  
2 in  
20) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that  
sufficient space is available around the TV to allow satisfactory cooling.  
— Have two people remove the TV from the box with the screen facing away  
from you. It's possible your clothing, (such as a belt buckle or button) may  
scratch the front of the TV. Do the same when moving the TV to another  
location.  
21) When attaching to a wall, use the optional JVC wall mounting unit.  
For LT-42X899: JVC-XUF-2637 LCD FLAT WALL MOUNT  
For LT-47X899: JVCPCM-MS2 TILT/FLAT WALL MOUNT  
For LT-52X899: JVCPCM-MS2 TILT/FLAT WALL MOUNT  
Caution  
— Consult qualified installers.  
— See the included manual on mounting procedures.  
— JVC is not responsible for damages or injuries due to improper mounting.  
— Use with other wall mounting unit is capable of resulting in instability or causing possible  
injury.  
22) Make enough room for inserting and removing the power plug. Place the TV as close  
to the outlet as possible. The main power supply for this TV is controlled by inserting or  
removing the power plug.  
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED  
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
FCC Notice:  
Caution: Changes or modifications not expressly approved by party responsible for  
compliance could void the user's authority to operate the equipment.  
Note: This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
We have an important note for customers who subscribe to basic cable services (do not have  
a separate cable box) and plan to use their JVC TV remote control to select channels.  
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is  
receiving through the RF input), every channel number available from your cable company  
will appear in your television’s Channel Summary and they will all be marked as available for  
scanning. Even though every channel is detected and appears as available, you will only be  
able to view those that you specifically subscribe to from your cable company. This will likely  
mean there are blank channels between those channels you wish to scan or “surf”.  
We apologize for any inconvenience this may cause but it is important to note that this is  
not a malfunction of your television. If you want to sequentially scan those channels you  
subscribe to without blank ones in between, you can contact your cable company for their  
cable box and remote, or manually deselect them using the edit / skip feature on page 25.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Avoiding Temporary Burn-in  
Displaying fixed images for extended periods of time can leave a subtle but temporary burn-in  
image on your screen. To avoid this, mix your viewing pattern.  
Examples include, but are not limited to the following:  
For example...  
• Stock-market report bars  
• Shopping channel logos and pricing  
displays  
TV on  
TV off  
• Video game patterns or scoreboards  
• Bright station logos  
• Internet web sites or other computer-style  
images  
• DVD discs, video tapes, laser discs  
• Broadcast, cable, satellite channels or  
digital television tuners/converters  
XYZ  
XYZ  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Tidying the cables  
A cable holder which keeps your connection cables  
tidy is attached to the back of the stand.  
Install your TV  
Hole  
To prevent the TV from falling, thread the belt  
through the hole on the back of the standand  
secure it to the TV rack.  
Belt and screw (not included)  
Disconnecting the stand  
1) Place the TV face down on a soft cloth on a table.  
2) Remove the five screws from the back of the TV.  
* In the case of placing the 52” TV  
on the wall, please follow the next  
steps.  
1) Remove the TV base from the  
upper body of the stand.  
3) Pull out the stand from the TV.  
2) Attach the upper stand body to  
the TV.  
Notes:  
• To re-install the stand, reverse the procedure from 3) to 1).  
• If you find it difficult to remove the screws from inset screw wells, use a magnetized  
screwdriver.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Package Contents  
Make sure you have the following.  
AA Batteries x 2  
Remote Control x 1  
Television x 1  
POWER  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
1
2
5
8
0
3
6
9
4
7
RETURN  
+
TUNE  
TV  
–
CH  
+
–
VOL  
+
LIGHT  
MUTING  
OK  
DVR  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
RM-C1430  
TV  
Frame  
How to clean the frame and stand  
Your TV has a glossy frame and stand which  
have protection sheets attached to them. Peel  
them off before use, but only after the TV has  
been properly placed. Take care with handling  
the glossy frame and stand because these  
surfaces are delicate. If the glossy frame or  
stand becomes dirty, first dust it off, then wipe it  
softly with a cleaning cloth. If you wipe without  
dusting off, you may damage it.  
Stand  
Insert the batteries  
Use two “AA” batteries (included).  
Place the "–" end in the unit first, making sure the "+" and  
"–" markings are correct. Place the "–" end in the unit  
first.  
If this symbol is shown, it is only valid  
in the European Union  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
The following pages gives you a brief description of each button’s function. For more detailed  
information on the remote control buttons, see pages 20 - 23. This remote can also control up  
to four other devices. See page 55 - 61.  
POWER  
Turns the TV on or off.  
POWER  
Switch between “TV / STB /  
VCR / DVD / AUDIO devices.  
See page 55.  
TV  
STB VCR DVD AUDIO  
INPUT  
TV  
STB VCR DVD AUDIO  
MODE  
MODE  
V1  
V2  
V3  
V4  
V5  
INPUT  
Switch between devices  
connected to Video-1, 2, 3,  
4 and 5.  
V1  
V2  
V3  
V4  
V5  
1
2
5
8
0
3
6
9
4
1
2
5
8
0
3
6
9
7
Change channels. Input  
remote codes. See page 55.  
4
RETURN +  
TUNE  
TV  
7
RETURN +  
– CH +  
– VOL +  
LIGHT  
MUTING  
Lets you decide the input channel and select  
it. After pressing the remote 0 - 9 buttons,  
press TUNE.  
TUNE  
OK  
RETURN +  
TV  
Lets you go back to the previously selected  
channel. See page 20.  
DVR  
STATUS  
– CH +  
Move sequentially through the channels.  
Raise or lower the volume.  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
– VOL +  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
All remote control buttons are illuminated,  
LIGHT  
except for the LIGHT button.  
Turns the TV volume to 0. Press again to  
restore the volume.  
MUTING  
RM-C1430  
TV  
Used to access the TV’s onscreen menus.  
See page 24.  
Used to navigate through the TV’s  
onscreen menus.  
OK  
Go back to a previous onscreen menu or to  
correct a mistake.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Save your favorite channels. See page 20.  
Change the aspect ratio of the image on your  
TV screen. See page 20.  
POWER  
TV  
STB VCR DVD AUDIO  
INPUT  
Change the sound mode of the MaxxAudio  
function. See page 21.  
MODE  
SOUND  
VIDEO  
GUIDE  
V1  
V2  
V3  
V4  
V5  
Choose different display settings according to  
personal preferences. See page 21.  
1
2
5
8
0
3
6
9
4
Programming information. (Digital channels  
only). See page 21.  
7
RETURN +  
TUNE  
TV  
Used to select sub channels.  
(Digital channels only). See page 21.  
SUB CH  
TV/VCR  
– CH +  
– VOL +  
LIGHT  
MUTING  
Use the C.C. (Closed Caption) button to  
select the mode of closed caption. See page  
22.  
C.C.  
SUB T.  
OK  
DISPLAY  
TWIN  
View current channel information.  
Activate the split screen option.  
DVR  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
TWIN  
SLEEP  
ML/MTS  
SLEEP  
Choose how long the TV will stay on before  
turning off. See page 23.  
SWAP  
SELECT  
Listen to a program in stereo, mono or  
another language (SAP). (Depending on  
availability in the program). See page 23.  
ML/MTS  
RM-C1430  
TV  
Exchange the channel (or input) displayed in  
the split screen window for the main screen  
image.  
SWAP  
Select the picture (channel) while viewing split  
screen.  
SELECT  
* See page 56 for buttons that control your external devices.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Before you connect your television to another device, please refer to the proper diagrams for  
your specific TV and remote. These will help assist you in understanding how to connect your  
television to another device, as well as use the remote to set up your television. Some of the  
connection terminals are color coded for easy connection with the proper cables.  
Front Panel  
Illumination  
POWER LED  
Side Panel  
Input  
Change the input  
MENU  
Used to access the TV’s onscreen menus.  
+CH–  
Move sequentially through the channels.  
+VOL–  
Raises or lowers the volume.  
POWER  
Turn the TV on or off.  
Rear Panel  
• For governing the use of  
the IR IN terminal, consult  
your dealer.  
F
Antenna / Cable  
75  
Ω
IR IN  
(VHF/UHF)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Digital Camera  
Audio System  
G
J
VIDEO  
R
–
AUDIO  
–
L
Y
PR  
PR  
VIDEO  
R
–
AUDIO  
–
L
Y
PR  
PR  
S-VIDEO  
VIDEO  
R
R
–
–
AUDIO  
AUDIO  
–
–
L
L
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO  
VIEWER  
INPUT  
5
INPUT  
2
INPUT  
1
PC IN  
(D-SUB)  
R
–
AUDIO  
–
L
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO  
VIEWER  
INPUT 5  
INPUT 2  
INPUT 1  
PC IN  
(D-SUB)  
A
A
A, B  
PC  
I
DVD Player  
• For more detailed information, see  
pages 48 - 54.  
• For governing the usage of the  
RS-232C terminal, consult your  
dealer.  
STB (Digital Cable,  
satellite) Tuner Box  
VIDEO  
E
R
– AUDIO  
–
L
Y
PR  
PR  
C, E  
VIDEO  
R
– AUDIO  
–
L
Video Camera  
Y
PR  
PR  
C, D, E  
S-VIDEO  
VIDEO  
* This is used when you are using  
a DVI device.  
R
R
– AUDIO  
–
–
L
L
Game Console  
Audio System  
– AUDIO  
H
R
– AUDIO  
–
L
A, B, C, D, E, F, G, H, I, J: Types of connections.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Device Side  
With Cables  
TV Side  
A
HDMI  
HDMI Cable  
INPUT 1, 2 or 5  
B
DVI – HDMI Cable,  
Audio Cable  
INPUT 1 +  
HDMI ANALOG AUDIO  
DVI + Audio  
C
Component  
Component  
Video + Audio  
Video + Audio  
INPUT 3 or 4  
D
S-Video Cable,  
Audio Cable  
INPUT 3 +  
AUDIO Input  
S-Video + Audio  
E
Composite  
Video + Audio  
Composite  
Video + Audio  
INPUT 3, 4 or 5  
F
Antenna / Cable  
(VHF / UHF)  
75Ω  
(VHF / UHF)  
RF Cable  
G
OPTICAL AUDIO  
Cable  
DIGITAL AUDIO  
OPTICAL OUT  
OPTICAL INPUT  
H
AUDIO INPUT  
AUDIO OUT  
(L / R)  
(L / R)  
Audio Cable  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Compatible Signal  
Notes  
Input  
• HDMI (Digital)  
SD: 480i, 480p  
See page 52.  
HD: 1080/60p / 1080/30p / 1080/24p / 1080i / 720p  
Audio L/R (Digital)  
Input  
• DVI (Digital)  
SD: 480i, 480p  
HD: 1080/60p / 1080i / 720p  
• Audio L/R (Analog)  
See page 51.  
See page 49.  
Input  
• Component (Analog)  
SD: 480i, 480p  
HD: 1080i, 720p  
• Audio L/R (Analog)  
Input  
• S-Video (Analog)  
• Audio L/R (Analog)  
Input  
• Composite (Analog)  
• Audio L/R (Analog)  
See page 49.  
See page 48.  
ATSC (Digital)  
NTSC (Analog)  
Clear QAM (Digital)  
Output  
• Audio L/R (Digital)  
(PCM or Dolby Digital)  
See page 50.  
See page 50.  
Output  
• Audio L/R (Analog)  
(Fixed)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
PC  
Device Side  
With Cables  
TV Side  
PC IN  
(D-SUB)  
I
D-SUB  
+ Audio  
(3.5 mm stereo mini jack)  
PC IN (D-SUB)  
+ INPUT 5 AUDIO Input  
D-sub (15 pin) Cable  
+ Audio Cable  
USB  
Device Side  
With Cables  
TV Side  
PHOTO  
VIEWER  
J
USB  
USB Cable  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Features  
Your JVC TV is equipped with many features. Here are some key features  
highlighted in detail.  
1 Stunning picture quality via 1920x1080 Full HD panel.  
Dynamic Gamma and Color Management give further  
fine tuned picture reproduction. Smart Picture adjusts the  
best possible picture quality automatically scene by scene  
based on the incoming signal from any source!  
2 “120Hz Clear Motion Drive III technology displays  
120 frames per second (120Hz) in the same time a  
conventional LCD TV displayes 60 frames (60Hz). You  
will be able to reduce blurring or image trails when there is  
rapid or complex movement across the screen.  
On  
Off  
i-clear Motion NR – Provides 3D noise reduction for moving images by applying the  
high-precision motion prediction techniques.  
Real 12bit Driver – JVC’s new bit extention technology takes 8-bit images and turns them into  
images with 12-bit precision. It produces smooth, natural signal gradations  
without sacraficing the original HD signal.  
3 JVC exclusive twin oblique cone speakers provide excellent TV sound quality. MaxxAudio  
sound provides you with 4 different settings based on the program you are watching. The  
equalizer will fine tune your listening preferences.  
4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of  
connections are explained on pages 47 to 51.  
x 1  
x 3  
x 2  
HDMI CEC (see page 42)  
5 Aspect mode will show every pixel you are getting in High Definition. The Native mode will  
show 100% of 1080p. Full – with slight overscan. Panorama and Cinema will fill the screen  
with various aspect settings. See page 40.  
6 Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage  
Class devices. See page 45.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Interactive Plug-In Menu  
When you turn on your TV for the first time, the Interactive Plug-In Menu appears automatically.  
These menus will help you setup your TV with basic information for Language, Time and  
Tuner Setup.  
1) Turn on the TV  
POWER  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
2) Set the language  
Interactive Plug-In Menu  
1 Select a language  
1
2
5
8
0
3
6
9
>
Language/Langue/Idioma  
Language/Langue/Idioma  
English  
Set  
4
OK  
7
RETURN +  
Operate  
Exit  
MENU  
TUNE  
TV  
Select  
– CH +  
– VOL +  
2 Select “Set”  
LIGHT  
MUTING  
OK  
3 Move to next menu  
1 Change settings  
3) Set time attribute  
DVR  
STATUS  
Interactive Plug-In Menu  
SOUND  
VIDEO  
GUIDE  
>
Set Clock  
Mode  
Manual  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
Channel  
Time  
–
–
–
SUB T.  
–
–
:
–
–
–
Time Zone  
D.S.T  
Pacific  
Off  
TWIN  
SLEEP  
ML/MTS  
Start Clock  
OK  
SWAP  
SELECT  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
2 Select an item  
3 Select “Start  
RM-C1430  
Clock”  
TV  
OK  
4 Move to next menu  
Mode  
Auto (Analog), Auto (Digital), Manual  
Channel  
Time  
Only can select when Mode is in Auto (Digital)  
Only can select when Mode is in Manual  
Time Zone Choose the time zone you live in.  
D.S.T.  
Changes the clock automatically for daylight saving time. On / Off  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Interactive Plug-In Menu (Continued)  
4) Set TV attribute  
– CH +  
– VOL +  
Interactive Plug-In Menu  
1 Change settings  
>
Auto Tuner Setup  
LIGHT  
MUTING  
Tuner Mode  
Scan Mode  
Cable  
Auto  
Start  
OK  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
2 Select an item  
3 Select “Start”  
DVR  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
OK  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
4 Start scanning  
channels  
RM-C1430  
TV  
Tuner Mode  
Scan Mode  
Choose Air (antenna), Cable or Skip  
Auto, STD, HRC, IRC  
* If you use a set top box (satellite or cable box), press “Exit” to  
skip this step.  
Cable Users: After your auto tuner setup is complete, you may,  
(depending on the type of hookup), have only 1 channel, usually  
2, 3 or 4 in the auto tuner memory. This is normal.  
“Thank you! Setup is now complete”  
Note:  
• If you want to turn off the Auto Demo, press the MENU button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
RETURN +  
RETURN+ TV  
TV  
Has three functions.  
Return – Returns to the channel viewed just before the channel currently onscreen.  
Return+ – Lets you program a specific channel to return to while scanning through the  
channels using the – CH + button as you memorize the channel.  
TV – Returns to the TV mode as you are watching a video, DVD, etc.  
Note:  
• Press the RETURN+ TV and hold for three seconds. This will memorize the current channel  
to return to while you scan through the other channels. To cancel, press and hold the  
RETURN+ TV button for three seconds.  
FAVORITE  
Allows you to save channels you like so you can view them easily. First you must register the  
channels you like.  
Notes:  
• Go to the channel you want to register and press the FAVORITE button for three seconds.  
• To view your favorite channels, press FAVORITE. Move π† to select your channel and  
press OK.  
• To erase your favorite channels, press FAVORITE. Move π† to select your channel and  
press ®.  
• Both analog and digital channels can be registered.  
• The newest channel you registered will appear at the top of the list.  
ASPECT  
Allows you to adjust the way the image appears on your TV based on the format that is being  
received.  
Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim  
See page 40.  
Note:  
• You can select the aspect mode by pressing the ASPECT button.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
DVR  
STATU  
SOUND  
SOUND  
Change the sound mode of the MaxxAudio function. High / Mid / Low / Off  
Notes:  
• You can choose the different sound modes by pressing the SOUND button.  
TATUS  
VIDEO  
VIDEO  
Allows you to choose different picture settings according to personal preferences. You can  
access this feature for each input (TV, V1, V2, V3, V4, V5).  
Standard / Dynamic / Theater / Game / Memory-1 / Memory-2  
Note:  
• You can select Video Status by pressing the VIDEO button. See page 34.  
GUIDE  
GUIDE  
DISPLAY  
You can view program information for Digital Channels.  
Note:  
• When the program information is not being broadcast, the correct information will not be  
displayed.  
• The GUIDE will not show the correct time and date depending on the Time Zone and D.S.T.  
settings. See page 43.  
SUB CH  
TV/VCR  
SUB CH  
TWIN  
Digital broadcast sometimes offers sub channels. By using the SUB CH button, you can select  
a sub channel easily.  
For example, to move to sub channel 123-45:  
1) Press 1, 2 and 3 in order  
2) Press the SUB CH button  
3) Press 4 and 5 in order  
4) Press the TUNE button  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
C.C.  
C.C. (Closed Caption)  
SUB T.  
Use the C.C. (Closed Caption) button to select the mode of closed caption. At first, select TV,  
STB or VCR mode to use the closed caption function.  
Notes:  
• You can change the mode by pressing the π† buttons and press OK.  
• Smart Caption will appear when you press the MUTING button only on channels where the  
broadcast contains closed captioning.  
• When you select On, it will be the mode selected in the Closed Caption Menu.  
• See page 32 when you set the caption/text mode.  
• If you are in PC mode or use HDMI, C.C. cannot be used.  
TWIN  
TWIN  
Activate the split-screen option by pressing TWIN  
TV  
Video-1  
on the remote control. The channel (or input) you  
were watching before pressing TWIN will appear on  
the left, the new channel will appear on the right. To  
turn split-screen off and return to normal television  
viewing, press TWIN again or press the BACK  
button. At first, select TV mode to use the TWIN  
function.  
MAIN SCREEN  
PICTURE  
SPLIT SCREEN  
PICTURE  
Notes:  
• You can enter the TWIN mode when you are in a single screen.  
• Split screen functions will not work when you are receiving a 1080/30p and 1080/24p signal.  
• Split screen functions will not work with locked channels or channels blocked by V-Chip  
ratings limits. A black screen will display instead.  
• The aspect of Main Screen Picture becomes 16:9 when you input the picture of 480p, 720p,  
1080i and 1080p from the component terminal, HDMI terminal and digital channels.  
• When you are in TWIN mode, you cannot change the aspect ratio.  
• When you press the MENU button in TWIN mode, the menu screen will not appear.  
• When you are in PC mode, TWIN, SWAP and SELECT cannot be used.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
SLEEP  
SLEEP  
Allows you to choose how long the TV will stay on before turning off.  
Notes:  
• You can change the interval by pressing the π† buttons and press OK.  
• You can set the interval at 0, 15, 30, 45, 60, 90, 120 and 180 minutes.  
• 60 seconds before the TV turns off, a message will appear and it will count the remaining  
time. If you want to extend the time, press the SLEEP button and you can change the  
interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.  
ML/MTS  
ML/MTS  
Allows you to listen to a program in stereo, mono sound or another language (SAP) if available.  
First you must set the MODE to TV on your remote.  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• MTS is unavailable if your television’s Input source is (V1, V2, V3, V4, V5).  
• ML/MTS will not work when you are using HDMI or an external input.  
SWAP  
S
SWAP  
You can exchange the channel (or input) displayed in the split screen window for the main  
screen image by pressing the SWAP button. At first, select TV mode to use the SWAP  
function.  
Notes:  
• It will only work in TWIN mode.  
SELECT  
SELECT  
With SELECT, you can select the picture (channel) while viewing split screen. When you press  
SELECT button, the channel banner on the top will be highlighted. Each press of SELECT will  
shift the channel. The sound outputs from the screen you have selected.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
1) Display the menu bar  
POWER  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
1
2
5
8
0
3
6
9
2) Display the desired menu  
4
Aa  
Initial Setup  
Select  
7
Language  
English  
Tuner Setup  
RETURN +  
Set Clock  
Set Lock Code  
Interactive Plug-in Menu  
Software Version  
Auto Demo  
TUNE  
TV  
OK  
OK  
– CH +  
– VOL +  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
LIGHT  
MUTING  
Enter  
OK  
3) Change or adjust the setting  
Select  
Aa  
Initial Setup  
Language  
English  
Tuner Setup  
Set Clock  
DVR  
OK  
OK  
Set Lock Code  
Interactive Plug-in Menu  
Software Version  
Auto Demo  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
DISPLAY  
SUB T.  
Operate  
Back  
BACK  
Exit  
MENU  
Change / Adjust  
Select  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
■ Change or adjust the setting using the pop-up menu.  
Select  
Enter  
English  
English  
French  
Spanish  
OK  
OK  
RM-C1430  
TV  
(Example: Language)  
■ To enter an item’s sub menu  
Select  
■ To the previous screen  
Note:  
• Depending on the situation  
(analog channels, digital  
channels, video signal  
format, external inputs,  
etc.), some items will be  
displayed in gray and can  
not be selected.  
Enter  
>
Set Clock  
Mode  
Auto (Digital)  
Channel  
Time  
–
–
–
–
–
:
–
–
–
OK  
OK  
Time Zone  
D.S.T  
Pacific  
Off  
Start Clock  
(Example: Set Clock)  
4) Close the menu  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Initial setup  
Aa  
Initial Setup  
Language  
English  
Tuner Setup  
Set Clock  
Set Lock Code  
Interactive Plug-in Menu  
Software Version  
Auto Demo  
Operate  
Back  
Exit  
MENU  
BACK  
Select  
Language  
Allows you to change the TV’s onscreen menu languages to English, French or Spanish.  
Tuner Setup  
Auto Tuner Setup  
If you skipped this step in the initial setup or your setup has changed, you can redo your setup  
in this menu. Air / Cable  
Channel Summary  
Channel summary allows you to customize  
>> Channel Summary  
the line-up of channels received by your TV.  
Regarding analog channels, you can add or  
Ch No.  
2
Scan  
Station  
delete channels from the line-up or prevent  
any unauthorized viewers from watching  
any or all 181 channels. Regarding digital  
channels, the only channels that will appear  
are the ones that are broadcasting.  
3-1  
3-2  
3-3  
4
CH-1  
CH-2  
CH-3  
5
The Channel summary screen will now be  
displayed with the channels set to scan  
marked with an “√”. Regarding analog  
channels, you can delete channels from the  
scan by removing the “√”. If any channels  
were missed during auto tuner setup and  
you wish to add them, you may by placing an  
“√” next to the channel number.  
Operate  
Back  
Exit  
BACK  
MENU  
Select  
Note:  
• The number of a digital channel may change, depending on the time of some broadcastings.  
If this channel existed and now has disappeared, the lock channel or scanned channel mark  
by the channel summary for that channel will be cancelled.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Initial setup (Continued)  
Channel Summary (Continued)  
You can set the channel label by selecting the  
Station column.  
>> Station  
Channel  
Reset  
Set  
Operate  
Back  
Exit  
BACK  
MENU  
Select  
Notes:  
• You can use characters for: Alphabet, numbers, marks and spaces.  
You can block access to a channel by  
activating the channel lock. Select the  
column.  
4
Please enter lock code  
by 10 key pad.  
Find Channel  
Allows you to add channels by pressing the 10 key pad.  
Digital Antenna Level  
This is a bar graph displaying the state of the Digital Antenna Level.  
Tuner Diagnostic  
(Service Use Only)  
Set Clock  
The set clock function is described on page 18 as the Interactive Plug In Menu. You can choose  
to set the clock automatically or manually.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Initial setup (Continued)  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
Interactive Plug-In Menu  
If you skipped this step in the initial setup or your setup has changed, you can redo your setup  
in this menu. The Interactive Plug-in Menu is described on page 18.  
Software Version  
You can confirm the TV’s software version.  
Auto Demo  
Auto Demo explains this TV’s features to you.  
Notes:  
• Please complete the Initial Setup menu first. The Auto Demo mode will start  
automatically when the Interactive Plug-In Menu is completed.  
• If you press any button on the television or remote, with the exception of  
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds  
have passed with no operation, the Auto Demo mode will start again.  
• If you want to turn off the Auto Demo, press the MENU button.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
V-Chip  
Aa  
V-Chip  
V-CHIP  
Off  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Unrated  
View  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
Notes:  
• V-CHIP will not work with video signals from VCRs, DVD players, Blu-ray or camcorders  
connected to the TV.  
• (For Canadian viewers only): V-CHIP is designed specifically for the US and may not work  
properly in Canada.  
• “Advanced V-Chip Rating” and “Advanced Canadian Rating” menus may be displayed  
sometimes. This depends on the broadcast you are receiving.  
– When entering the password –  
When you try and access the V-Chip menu, “Please input password” will appear. Press the “0”  
button four times on your remote to access the V-Chip menu for the first time.  
Set Movie Ratings  
1
4
7
2
5
8
0
3
6
9
Please enter lock code  
S
by 10 key pad.  
S
U
– When you lock or unlock channels –  
You can lock or unlock ratings as shown below.  
1 Select  
> Set US TV RATINGS  
TV  
TV  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
MA 14  
OK  
V/FV  
S
L
2 Lock / Unlock  
D
Note:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
V-Chip (continued)  
V-Chip  
Allows you to block channels or content that you deem inappropriate for children. On / Off  
Set US TV Ratings  
This setting is based on the US ratings system.  
TV Y – Appropriate for all children.  
Intended for all children 2 - 6 years old.  
TV Y7 – Appropriate for older children.  
Intended for children 7 years or older.  
TV G – General Audience.  
Suitable for all ages.  
TV PG – Parental Guidance Suggested.  
Suitable for all ages with parental guidance.  
TV 14 – Parents Strongly Cautioned.  
Intended for viewers 14 years or older.  
TV MA – Mature Audiences Only.  
Intended for viewers 18 years or older.  
Viewing Guidelines:  
In addition to the above ratings, you can also block or allow more specific content. (Except for  
unrated programming).  
A program can contain any or all of the following:  
V/FV – VIOLENCE/FANTASY VIOLENCE  
S – SEXUAL CONTENT  
L – Strong LANGUAGE  
D – Suggestive DIALOG  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
V-Chip (continued)  
Set Movie Ratings  
This setting is based on the US Motion Picture Association of America (MPAA) ratings system.  
NR – Not Rated.  
Any type of programming that does not contain a rating.  
G – General Audience.  
Suitable for all ages.  
PG – Parental Guidance Suggested.  
Suitable for all ages with parental guidance.  
PG 13 – Parents Strongly Cautioned.  
Intended for viewers 13 years or older.  
R – Restricted.  
Not recommended for viewers 17 years without parental guidance.  
NC-17 – No One Under 17.  
Not intended for viewers 17 years or younger.  
X – No One Under 18.  
Not intended for viewers 18 years or younger.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
V-Chip (continued)  
Set Canadian Ratings English  
This setting is based on the Canada rating system.  
E – Exempt.  
Any type of programming that does not contain a rating.  
C – Intended for children.  
Suitable for all ages.  
C8+ – Intended for children over 8 years old.  
Suitable for all ages over 8 years.  
G – General Audience.  
May contain material not suited for younger viewers.  
PG – Parental Guidance.  
May contain material not suited for younger viewers. Parents may consider some content not  
appropriate for children 8 - 13 years old.  
14+ – 14 Years or Older.  
Parents strongly urged to use their discretion in allowing viewing by persons under 14.  
18+ – Adult.  
Intended for viewers 18 years or older.  
Set Canadian Ratings French  
For instructions on “Set Canadian Ratings French”, please see page 31 in the French user’s  
guide.  
Unrated  
You can block programs that are not rated.  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to Block.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Closed Caption  
Aa  
Closed Caption  
Page 1/2  
Closed Caption  
Off  
Type  
Auto  
CC1  
1
Analog Service  
Digital Service  
Appearance Mode  
Font Size  
Auto  
Auto  
Auto  
Font Style  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
Closed Caption  
Allows you to select the mode of the closed caption. First you must set the MODE to either TV,  
STB or VCR on your remote. On / Smart Caption / Off  
– Smart Caption –  
Will display closed captioning when you press the MUTING button only on channels where the  
broadcast contains closed captioning.  
Type  
Auto: Shows closed caption a priority for digital channels over analog channels. It is set  
automatically.  
Advanced: Shows only the digital closed caption.  
Basic: Shows only the analog closed caption.  
Analog Service  
Choose the feature that you like for analog Closed Captioning.  
Digital Service  
Choose the feature that you like for digital Closed Captioning.  
Appearance Mode  
Auto / Manual  
Font Size  
Choose how big the text appears in Closed Captioning.  
Font Style  
Choose the style of the font in Closed Captioning.  
Text / Edge Opacity  
Choose how translucent the text appears in Closed Captioning.  
Background Opacity  
Choose how translucent the background box color for the Closed Captioning text.  
Text Color  
Choose the color of the text in Closed Captioning.  
Edge Color  
Choose the color of the border of the background box color for the Closed Captioning text.  
Background Color  
Choose the background box color for the Closed Captioning text.  
Reset  
Resets all adjustments except for Closed Caption at once to the default settings.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
On/Off Timer  
Aa  
On/Off Timer  
Mode  
No  
00  
00  
2
On Time  
Off Time  
Channel  
On Volume  
7
:
:
AM  
AM  
10  
Current  
Set  
Operate  
Back  
Exit  
MENU  
BACK  
Select  
Notes:  
• In order for the On/Off Timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
• If your clock is not set, "PLEASE SET CLOCK FIRST !" will appear on the screen.  
Mode  
You can select timer frequency. No / Once / Everyday  
On Time  
You can set the time you want the television to turn itself on.  
Off Time  
You can set the time you want the television to turn itself off.  
Channel  
You can set the channel of when On Timer is on.  
Note:  
The On/Off Timer cannot be set to locked or guarded channels.  
On Volume  
You can set the volume level when On Timer is on.  
0 - 50: Volume level  
Current: Start with current volume level.  
Set  
Set all settings of On/Off Timer menu.  
Note:  
• If you are out from On/Off Timer menu without pressing Set, all settings go back to previous  
setting.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture Adjust  
Aa  
Picture Adjust  
Page 1/2  
Video Status  
Standard  
Auto  
Natural Cinema  
Tint  
0
0
Color  
Picture  
0
Bright  
0
Detail  
0
Energy Saver mode  
-5  
Theater Pro  
II  
Operate  
Back  
Exit  
MENU  
BACK  
Select  
Video Status  
Choose different display settings according to personal preferences. You can use this feature  
with TV, V1, V2, V3, V4 and V5.  
Standard – Resets the picture display to the factory settings.  
Dynamic – Gives a vivid picture with better contrast when viewing in a brightly lit room.  
Theater – Gives a rich, film-like look to video when viewing in a dimly lit room.  
Game – Used for when you are playing video games connected to your TV.  
Memory-1 / Memory 2 – You can memorize your favorite picture settings (Tint, Color, Picture,  
Bright, Detail, Energy Saver Mode)  
Notes:  
• Each mode is memorized for each input (TV, V1, V2, V3, V4, V5) connected to the TV.  
• Each video status setting has a separate memory for HD (1080i/1080p/720p) and SD  
(480p/480i) video signal. Each video status can be chosen along with your favorite picture  
settings (Tint, Color, Picture, Bright, Detail and Energy Saver Mode).  
– When an HD or SD signal is displayed, your HD or SD settings are recalled for the video  
status you are using.  
■ Allows you to change and adjust the way the picture appears on your television.  
Tint  
Allows you to adjust the levels of red and green on your TV.  
Color  
Allows you to make all the colors on your TV appear more vivid or subtle.  
Picture  
Allows you to adjust the level of black and white on your TV giving you a darker or brighter  
picture overall.  
Bright  
Allows you to adjust the overall brightness of the TV.  
Detail  
Allows you to adjust the level of fine detail on your TV.  
Energy Saver Mode  
Allows you to adjust the brightness of the internal lamp which effects the overall brightness of  
the TV.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture Adjust  
Natural Cinema  
Allows you to compensate for image blurring when the original video you are watching was shot  
at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion process is known as  
“TELECINE”. Auto / On / Off  
Notes:  
• When you are receiving a 480p, 720p, 1080p signal, or in PC mode, Natural Cinema cannot  
be selected.  
• Natural Cinema is only applied for SD 480i and HD 1080i signals.  
Theater Pro II  
It is possible to use Theater Pro II menu only when the Video Status mode is set to Theater,  
Memory-1 or Memory 2. It adjusts the detailed picture settings.  
Theater Pro II Menu  
DSD Detail  
H.Sharp  
V.Sharp  
DSD Noise Control  
Color Temp.  
Settings  
Shows the edge of the picture clearly  
Emphasizes the edge of the picture horizontally  
Emphasizes the edge of the picture vertically  
Reduces picture noise  
Adjusts the screen (red, blue or green) color  
(High, Low)  
Color Balance  
*Color Mngmt.  
Adjust the blue color naturally  
Select a corrected color  
(Red, Yellow, Green, Cyan) Axis  
*Color Mngmt.  
(Red, Yellow, Green, Cyan) Tint  
*Color Mngmt.  
Adjusts the tints of (red, yellow, green or cyan)  
Adjusts the color of (red, yellow, green or cyan)  
(Red, Yellow, Green, Cyan) Color  
*Color:Bright Area  
*Color:Dark Area  
Adjusts the picture color of the bright areas  
Adjusts the picture color of the dark areas  
* These Theater Pro II menus cannot be selected when Color Management is OFF. See page 36.  
– Reset  
Resets all Theater Pro II menu picture adjustments.  
x.v.Color  
This makes full use of the display’s capabilities to produce the perception of depth-of-field and  
texture. Auto / On / Off  
x.v.Color and  
are trademarks.  
Color Temp  
Allows you to adjust colors to look as accurate as possible.  
High - Creates a slightly cooler looking image  
Low - Creates a slightly warmer looking image  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture Adjust (continued)  
Color Management  
Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues.  
On / Off  
Dynamic Gamma  
Allows you see more detail in very dark or bright areas so these areas don’t appear “muddied”.  
Normally, this feature should be left On for optimum picture quality. On / Off  
Smart Picture  
Allows the TV to adjust the brightness level automatically to a level suitable for what you are  
watching. On / Off  
Digital VNR  
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).  
Auto / Max / Min / Off  
MPEG NR  
This function effects the block noise removal and mosquito NR (Noise Reduction)  
simultaneously. Max / Min / Off  
Note:  
• When you are receiving digital channels, block noise removal will have no effect.  
Smart Sensor  
This function automatically adjusts the brightness on your TV according to the amount of light  
in the room. Display / On / Off  
– Display –  
“Leaf” icon will appear on your TV screen when Smart Sensor brightness adjustment occurs.  
The leaf icon will appear a maximum of 6 leaves.  
Reset  
Resets all picture adjustments at once to the default settings, except for Video Status and  
Natural Cinema.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Sound Adjust  
Aa  
Sound Adjust  
Page 1/2  
MaxxAudio  
Low  
Off  
MaxxBass  
MaxxTreble  
MaxxStereo  
MaxxVolume  
Balance  
+1  
+3  
0
0
Operate  
Back  
Exit  
MENU  
BACK  
Select  
MaxxAudio improves sound performance with four sound features (MaxxBass, MaxxTreble,  
MaxxStereo and MaxxVolume). High / Mid / Low / Off  
■ Allows you to change and adjust the four sound features on your television.  
MaxxBass – Compensates for low frequencies and widens the frequency band.  
MaxxTreble – Compensates for high frequencies and widens the frequency band.  
MaxxStereo – Expands the stereo sound naturally.  
MaxxVolume – Maintains a uniform sound volume even if the sound becomes too loud all of  
the sudden (during commercial breaks, etc.). On / Off  
Note:  
• Adjustment made to the four sound features (MaxxBass, MaxxTreble, MaxxStereo and  
MaxxVolume) will be stored in the selected “MaxxAudio” setting.  
MaxxAudio is a registered trademark of Waves Audio Ltd. in the  
USA, Japan and other countries.  
Balance  
Adjust the level of sound between the TV’s left and right speakers with the balance setting.  
Turn On Volume  
Turn On Volume allows you to set the volume level when you turn the TV on.  
Volume Limit  
Volume Limit allows you to set the maximum volume level.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Sound Adjust (continued)  
Optical Out  
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is  
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,  
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to  
digital channels.  
Notes:  
• Optical Out can be used for both digital and analog channels.  
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t  
select PCM, it cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 50.  
Manufactured under license from Dolby Laboratories. "Dolby", and  
the double-D symbol are trademarks of Dolby Laboratories.  
Reset  
Resets all sound adjustments at once to the default settings, except for MaxxAudio.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Features  
Aa  
Features  
Page 1/2  
Video-5 Input  
Noise Muting  
Front Panel Lock  
Auto Shut Off  
Quick Start-up  
Aspect  
HDMI  
On  
Off  
Off  
On  
Full  
Position Adjustment  
Operate  
Back  
Exit  
MENU  
BACK  
Select  
Video-5 Input  
Allows you to choose the signal type you wish to receive that you have connected to Video-5  
Input. HDMI / D-sub / Composite  
Noise Muting  
This feature inserts a blank black screen over channels which are not broadcasting or are too  
weak to be received clearly. On / Off  
Front Panel Lock  
This allows you to lock the keys on the side of the TV. On / Off  
Auto Shut Off  
“Auto Shut Off” will work when there is no signal and there is no TV operation for 10 minutes.  
“Auto Shut Off” will not work while you are receiving a signal, even though there is no TV  
operation for 10 minutes. On / Off  
Note:  
• If the channel that you have on does not receive a signal for more than one minute, the  
blinking text “No Program or Weak Signal Auto shut off in 9 min.” appears on the screen,  
and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself  
off.  
Quick Start-up  
This allows you to quickly start the TV by skipping over the JVC logo on the TV screen when  
you press the Power button. On / Off  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Features (continued)  
Aspect  
Allows you to adjust the way the image appears on your TV based on the format that is being  
received.  
Panorama - When watching a 4:3 aspect picture it is stretched to fit the dimensions of the 16:9  
aspect screen.  
Cinema - This ratio “zooms in” on the center part of a 4:3 aspect picture, blowing it up  
proportionally to fill the 16:9 screen.  
Full - When watching a 4:3 aspect picture, it is stretched to fit the dimensions of the TV. When  
watching a 16:9 aspect picture, it displays 95% of the ratio.  
Panorama Zoom - When watching a High-Definition 16:9 aspect picture it is stretched to  
eliminate the black side bars.  
Cinema Zoom - This ratio “zooms in” on the center part of a High-Definition 16:9 aspect image  
to eliminate the black surrounding bars.  
Full Native - This ratio displays 100% of the ratio. Normally, all aspects except for Full Native  
display about 95%.  
Regular - When watching a 4:3 aspect picture without modifying the original picture to fit the  
dimensions of your 16:9 screen. Black bars will appear along the picture’s sides. The picture  
will be centered within the boundaries of the 16:9 screen.  
Slim - This aspect mode shrinks the screen of a 16:9 broadcast to 4:3. There are some  
programming that is already stretched by mistake at broadcasting companies, so this mode  
corrects it. Black side bars will appear.  
Notes:  
• Depending on the signal format, some aspect modes are unavailable.  
• Slim can only be displayed when the signal is ATSC (720p, 1080i) or HD (720p, 1080i,  
1080p).  
• Full Native can only be displayed when the signal is ATSC (1080i) or HD (1080i, 1080p).  
• If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
Full automatically. If the television receives a 4:3 signal from your HDMI device when you are  
in Full aspect mode, it will return to aspect mode you chose. If you change the aspect mode  
after the television changed it to Full automatically, the television will change to the aspect  
mode you choose. It also turns to Full automatically when the TV receives an HD (1080p,  
1080i or 720p) signal.  
• You can access the aspect modes using the buttons on the side of the TV, by using the  
MENU button, then – CH + button.  
• You can select Regular or Full in PC mode.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Features (continued)  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically when  
the aspect is set to panorama or cinema.  
> Position Adjustment  
Operate  
Back  
Exit  
BACK  
MENU  
Select  
Notes:  
• To reset the adjustment to the center, press the OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at its  
maximum limit.  
• If you select Regular, Slim, Full or Full Native size with aspect or Multi Screen, position  
adjustment option is not selected.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set Panorama Zoom or Cinema Zoom for 1080p, 1080i and 720p signals, or  
when PC mode is set.  
• It is also possible to use Position Adjustment when you are in PC Mode.  
Illumination  
Allows you adjust the brightness of the illumination on the front of the TV.  
High / Low / Off  
Power Indicator  
Allows you adjust the brightness of the POWER LED on the front of the TV.  
High / Low / Off  
HDMI Size  
The HDMI Size menu can only be selected when an HDMI 480p picture signal is being input  
to the HDMI terminal. This option adjusts the position when an HDMI or DVI 480p picture  
signal is being displayed on the screen. There are two types of HDMI 480p picture signals:  
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted  
by selecting Auto, Size1 or Size2.  
Note:  
• You can select Auto only when the signal is 480p for HDMI. When you select Auto, the  
television will select "Size1" or "Size2" automatically.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Features (continued)  
Control with HDMI  
If you use a HDMI CEC compatible device, set this setting to “On”.  
HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI  
CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional  
protocol used in HDMI.  
• HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.  
• The TV does not support HDMI CEC functions that are not listed below.  
• The TV does not guarantee to support use of all HDMI CEC enabled devices.  
• Devices that are not enabled to HDMI CEC cannot be controlled with this TV.  
– Control the TV using the HDMI CEC enabled device –  
• Turn the TV on and switch to the video source of the operating device.  
• Switch to the video source of the operating device.  
• Turn the TV off with the HDMI CEC enabled device you are viewing.  
• For operating instructions of the device, refer to the device’s manual.  
– Control the HDMI CEC enabled device using the TV –  
• Turn off the operating device by turning off the TV.  
• Some device may not support this function. For more details refer to the device’s manual.  
– Send status of the TV to the HDMI CEC enabled device –  
• When switching the TV’s external input or channel.  
• When switching the TV’s menu language.  
• Information regarding behavior of the device when status is received, refer to the external  
device’s manual.  
If “HDMI CEC” does not work correctly:  
• When HDMI CEC enabled device is connected to INPUT1, INPUT2 or INPUT5 with an HDMI  
cable, you may not be able to control TV’s external input. To solve the problem set “HDMI  
CEC” to “Off”.  
Video-1 Audio  
Set to “Digital” or “Auto” for HDMI devices, or “Analog” or “Auto” for DVI devices for INPUT1.  
(Not available for INPUT2 and INPUT5)  
Video Input Label  
Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4  
and 5 inputs.  
VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT / AMP / GAME / CAM / DISC  
– Reset  
Resets all Video Input Label settings.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Key Items  
Aa  
Key Items  
Favorite  
Guide  
Display  
Sleep Timer  
Multi Language/MTS  
Off  
0 min.  
Operate  
Back  
Exit  
MENU  
BACK  
Select  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See page 20.  
Guide  
You can view program information.  
Notes:  
• The GUIDE function will work when you are receiving digital program only.  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television.  
• When the program information is not being broadcasted, it will not show the correct  
information.  
Display  
Change display of channel banner, clock etc..  
Banner/Clock / Clock / Short Banner / Off  
Sleep Timer  
Allows you to choose how long the TV will stay on before turning off. First set the MODE to TV.  
0 min. / 15 min. / 30 min. / 45 min. / 60 min. / 90 min. / 120 min. / 180 min.  
Note:  
• 60 seconds before the TV turns off, a message will appear and it will count the remaining  
time. If you want to extend the time, press the SLEEP button and you can change the  
interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Key Items (continued)  
Multi Language/MTS  
Allows you to listen to a program in stereo, mono sound or another language (SAP).  
(Depending if available in the program). First you must set the MODE to TV on your remote.  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• MTS unavailable if your television’s input source is (V1, V2, V3, V4, V5).  
• ML/MTS will not work when you are using the HDMI and external input.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Photo Viewer  
Aa  
Photo Viewer  
Photo Viewer  
Operate  
Back  
BACK  
Exit  
MENU  
Select  
Connect your USB Mass Storage Class device to the Photo Viewer terminal on the TV. Photo  
Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class  
devices. You can view them on the TV in high quality.  
Notes:  
• Gently pull out your USB device from the Photo Viewer terminal after finishing the “Photo  
Viewer” menu.  
• Device can only be selected when you have two or more USB devices connected to the TV.  
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. It may take  
some time to display or it may not display correctly.  
• Please refer to the Customer Support website at www.jvc.com/support for information and  
notes regarding your devices you wish to connect.  
• Supported file formats are “.jpg” or “.JPG”.  
• All your stored data should be backed up first as a precaution before connecting to the TV.  
• Depending on your stored file size, it can take extra time to display “Photo Viewer” page.  
• Photo viewer is not compatible with all USB media devices.  
Device  
Select your devices such as USB memory or digital camera.  
Note:  
• By using the USB hub, you can connect several devices. Choices are different depending on  
your connected devices.  
Multi Screen  
Display digital pictures stored on your USB Mass Storage Class devices in thumbnail view.  
1 Select  
Photo Viewer  
>
Multi Screen  
Date:  
Dimensions:  
Page:  
1/1  
OK  
Page Jump  
Back  
BACK  
Exit  
MENU  
Operate  
.
.
.
D
ꢀ
Select  
2 Display  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Photo Viewer (continued)  
Multi Screen (continued)  
Choose thumbnail view by pressing π† or √ ® and press the OK button. It will now be  
shown on the screen. To move to the next picture, press the √ ® buttons.  
• To go to the next page, select the right end image and press the ► button. To go back to  
the previous page, select the left end image and press the ◄ button.  
• Press 1 - 9 buttons to display the page you want in Multi Screen.  
• By pressing DISPLAY button, you can display control help screen and detailed information  
of the picture when you are viewing a single image. Change the screen of control help and  
detailed information by pressing DISPLAY button several times.  
Preview Guide  
You can display control help screen when you watch the picture. On / Off  
VOL +: 90º right-handed rotation  
- VOL : 90º left-handed rotation  
123456789 : Move to display area in each direction (only  
when zoomed in)  
– Reset  
5 : Resets to default condition  
+
Prev.  
Next  
–
π: Zoom in  
†: Zoom back  
VOLUME  
ROTATE  
–
+
BACK: Back to Multi screen  
MENU: Back to TV  
DISPLAY  
Guide  
Back  
Exit  
BACK  
MENU  
Notes:  
• Rotation settings are also memorized for Slide Show. But if you disconnected the USB  
Mass Storage Class device or you turn TV off, rotation settings are reset to default settings.  
• Zoom in, Zoom back or position settings are only valid in current display.  
Slide Show  
Display your picture image one after another automatically. Display pattern depends on Slide  
Show Transition (Page 47) and interval depends on Interval Time(sec.) (Page 47).  
Notes:  
• Press the BACK button to stop the Slide Show.  
• To pause the Slide Show, press the OK button. To unpause, press the OK button again.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Photo Viewer (continued)  
Slide Show Transition  
Allows you to choose display pattern of Slide Show.  
Fade / Slide / Wipe / Zoom / Blind / Shuffle  
– Shuffle –  
Will display the pictures in 5 patterns randomly of Fade, Slide, Wipe, Zoom and Blind.  
Interval Time(sec.)  
Allows you to change Slide Show interval. 1-10 / 15 / 20 / 30 / 45 / 60 / 90 / 120 / Manual  
– Manual –  
You can slide the picture by pressing the √ ® buttons.  
Note:  
• Slide Show may take extra time more than what you set in the Interval Time. This depends  
on how large the file size is of the picture.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Notes:  
• The following connection diagrams are examples on connecting some of the most common  
devices to your TV. Please refer to your device’s instruction manual on other connection  
methods or for devices not shown here in this instruction book.  
• When you are finished connecting your devices, turn on your TV and devices.  
Connect an Antenna or Basic Cable  
Cable or Antenna  
Output  
75 Ω  
(VHF/UHF)  
IR IN  
TV Rear Panel  
Notes:  
• If you are able to receive ATSC (Digital terrestrial) signal, High Definition (HD) broadcasting  
can be watched.  
• All digital broadcasting is not necessary High Definition. Check by pressing the DISPLAY  
button.  
• Digital broadcasting is not available in all areas.  
Connect a Cable Box  
CABLE BOX  
Cable or Antenna  
Output  
IN  
OUT  
75 Ω  
(VHF/UHF)  
IR IN  
TV Rear Panel  
Note:  
• To view channels on your cable box, make sure your TV’s channel is set to 2, 3 or 4  
(depending on the area you live in).  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a DVD Player  
3
RS-2  
Green cable is for “Y”  
Blue cable is for “PB”  
Red cable is for “PR”  
5
I
TV Rear Panel  
Video Out  
PB PR  
Audio Out  
(INPUT 4)  
Y
L
R
DVD Player  
4
INPUT  
R
-
AU  
D
IO  
-
L
3
Notes:  
• Green, blue and red are the most common colors for Component Cables. Some models may  
vary in color.  
• To watch your DVD player, make sure your TV is displaying INPUT 3 or INPUT 4 by pressing  
the V3 or V4 button on your remote control.  
Connect a Camcorder  
5
TV Rear Panel  
(INPUT 4)  
Camcorder  
IPNUT  
4
IPNUT  
R
-
AU  
D
IO  
-
L
Note:  
• To watch video from your camcorder, make sure your TV is displaying INPUT 3, INPUT 4 or  
INPUT 5 by pressing the V3, V4 or V5 button on your remote control.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect an Amplifier or Home Theater System  
TV Rear Panel  
(AUDIO OUT)  
FROHDMI1  
DIOUT  
Amplifier  
or  
Home Theater System  
R
-
AU  
D
IO  
-
L
AIDOUT  
DIOUT  
Speaker  
Speaker  
Note:  
• Refer to your amplifier’s or Home Theater System’s manual for more information.  
Connect an Amplifier using the DIGITAL AUDIO OPTICAL OUT  
TV Rear Panel  
(DIGITAL AUDIO OPTICAL OUT)  
Amplifier  
DIGITAL AUDIO  
OPTICAL OUT  
(with DIGITAL AUDIO OPTICAL INPUT)  
PHOTO  
VIEWER  
INPUT 5  
INPUT 2  
INPUT 1  
PC IN  
(D-SU
Speaker  
Speaker  
Notes:  
• Refer to your amplifier’s manual for more information.  
• This terminal can only output digital audio (PCM or DOLBY DIGITAL).  
• In order to use the optical output connection, select PCM or DOLBY DIGITAL. See page 38.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a Digital Source Device  
3
TV Rear Panel  
FOR HDMI 1  
HDMI ANALOG  
AUDIO  
INPUT  
TV Rear Panel (INPUT 1)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO  
VIEWER  
FORHDMI1  
INPUT 5  
INPUT 2  
INPUT 1  
DIOUT  
PC IN  
(D-SUB)  
ADIOUT  
DIOUT  
Digital Source Device  
L
R
DIGITAL OUT  
AUDIO OUT  
After the connections have been made,  
tighten the screw to secure the cables.  
Notes:  
• To watch your digital source device, make sure your TV is displaying INPUT 1 by pressing the  
V1 button on your remote control.  
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.  
Connect a IR IN Device  
In Out  
75  
Ω
IR IN  
(VHF/UHF)  
IR Device (set career to “Off”)  
TV Rear Panel  
Note:  
• Refer to your IR Device’s manual for more information.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a Blu-ray or HDMI Device  
TV Rear Panel (INPUT 2)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO  
VIEWER  
INPUT 5  
INPUT 2  
INPUT 1  
PC IN  
(D-SUB)  
Blu-ray / HDMI Compatible Device  
Notes:  
• To watch your Blu-ray or HDMI device, make sure your TV is displaying INPUT 1, INPUT 2 or  
INPUT 5 by pressing the V1, V2 or V5 button on your remote control.  
• Some decoders may not respond depending on the equipment that is connected to the HDMI.  
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.  
• This JVC television can accept a variety of HD signals, including 1080/60p, 1080/60i,  
1080/30p, 1080/24p and 720/60p.  
• Please use a High Speed HDMI™ Cable. High Speed HDMI™ Cables are tested to carry an  
HD signal up to 1080p and higher.  
• Some HDMI Output Devices may fail to detect this TV as a 1080p device. If this occurs,  
manually select 1080p on the HDMI Output Device.  
HDMI™ (V.1.3, with Deep Color, with x.v.Color™)  
HDMI, the HDMI Logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect an AV Receiver using SMART INPUT (INPUT 3)  
TV Rear Panel  
3
IPNUT  
R
-
AU  
D
IO  
-
L
AV Receiver  
MONITOR  
OUT  
PR  
PB  
Y
FROHDMI1  
DIOUT  
MONITOR OU
AIDOUT  
DIOUT  
Your TV is equipped with a SMART INPUT (INPUT 3). This allows you to watch many different  
devices connected to your AV Receiver without having to change or use other input connections  
on your TV. This allows you to free up the other input connections so you can connect more  
devices to your TV.  
Notes:  
• Refer to your AV Receiver’s manual for more information on connecting your speakers and  
other devices.  
• Use your AV Receiver’s remote to switch to the different devices you have connected.  
• Some AV Receivers may not respond when the V3 Smart Input function is turned on.  
• Your AV Receiver’s signal priority in order is Component, S-VIDEO and Composite.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a Computer  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO  
VIEWER  
INPUT  
5
INPUT  
2
INPUT  
1
PC IN  
(D-SUB)  
Computer  
R-S32C  
5
IPNUT  
R
-
A
U
D
IO  
-
L
4
IPNUT  
TV Rear Panel  
(INPUT 5)  
R
-
AU  
D
IO  
-
L
Notes:  
• Make sure your TV is displaying INPUT 5 by pressing the V5 button on your remote control.  
• When you do the above connection, set “Video-5 Input” in the Features menu to “D-Sub”.  
See page 39.  
• Use a D-SUB cable with ferrite cores and no longer than 3 Meters to avoid electromagnetic  
disturbances.  
• Refer to your computer’s manual for more information.  
Resolution  
Vertical  
Frequency  
(Hz)  
Horizontal  
Frequency  
(kHz)  
640 x 480  
(VGA)  
60  
60  
60  
31.5  
37.9  
48.4  
800 x 600  
(SVGA)  
1024 x 768  
(XGA)  
Notes:  
• Depending on signal quality, some pictures may not be displayed correctly.  
• Computers that cannot set the refresh rate to 60 Hz, cannot be used with this TV.  
• If you are inputting a PC signal that is invalid, “Invalid Signal” will appear on the TV screen. It  
appears when the input is PC and it is a single screen.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
You can program your remote control to operate your external devices, using the instructions  
and codes on pages 55 - 61.  
How to set the codes  
1) Manually turn on the device.  
2) Change the remote control mode according to the device by pressing the MODE button.  
Refer to the following list for which mode to use.  
3) Find the remote control code for your device. See pages 57 - 61.  
4) Set the remote code.  
1
4
7
2
5
8
0
3
6
9
TUNE  
The mode indicator goes  
out for a second, then it  
lights.  
Press and hold  
Enter the four digit number  
5) Point the remote at the device and press power. If your device did not turn off or respond, try  
another code.  
Notes:  
• If your device doesn’t respond to any of the codes listed or is not listed, see page 55.  
• Some codes may have only limited functions. Try other codes that may have more functions.  
Search Code Function  
This function searches for codes one by one if none of the codes listed for your device has  
worked.  
1) Manually turn on the device.  
2) Change the remote control mode according to the device. Press MODE to select the correct  
mode.  
3) Activate the search code function. Press and hold POWER and RETURN+/TV until the mode  
indicator blinks.  
4) Point the remote at the device and press POWER. If no response, try the next code by  
pressing ® and POWER until the device turns off.  
5) Press RETURN+/TV to register and set the code. Then the MODE indicator light goes out.  
Notes:  
• If your remote still doesn’t work with the “Search Code Function”, use the remote that came  
with your device. Your TV remote can not be guaranteed to work with all devices, modes or  
operations.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
Device  
TV  
Applied for these devices  
JVC brand only  
STB  
Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box, DBS/PVR Combination  
VCR, DBS/PVR Combination, PVR, DVD/PVR Combination  
DVD Player, DVD Recorder, Home Theater in a Box, Receiver  
Amplifier, Home Theater in a Box, Receiver  
VCR  
DVD  
AUDIO  
Remote Control Functions  
POWER  
Turns the selected device off  
TV  
STB VCR DVD AUDIO  
Changes the remote control mode  
MODE  
INPUT  
V3  
Audio Input  
Selection  
V1  
V2  
V4  
V5  
Displays Subtitles  
Open / Close  
SUB T.  
Channel Up / Down  
Volume Up / Down  
– CH +  
– VOL +  
Playback / Record, etc.  
Play  
Operates menus  
Select  
Rewind  
Forward  
Pause  
SWAP  
SELECT  
Back to  
previous  
menu  
Display  
menu  
OK  
Record  
Stop  
OK  
Note:  
• If your external devices has a TV/VCR function, refer to it’s manual.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
Programming Codes  
STB mode  
Cable Set Top Box  
Satellite Set Top Box  
Satellite Set Top Box  
ABC  
0003, 0008  
0899  
0899  
1187  
0476  
0476, 0810, 0276,  
0003  
0144  
0009, 0273  
0476, 0810, 0276,  
0003  
AlphaStar  
Chaparral  
Coolsat  
Crossdigital  
DirecTV  
0772  
0216  
1806  
1109  
Samsung  
1377, 1276, 1108,  
1109, 1442, 1609  
0856  
0639, 1639, 1640  
0869  
1142, 1442  
0749, 1749, 0790,  
1285  
1392, 1640  
1806  
0724, 0722  
1535  
1535  
0869  
Americast  
Bell South  
Digeo  
Director  
General Instrument  
SKY  
Sony  
1377, 0392, 0566, Star Choice  
0639, 1639, 1142, Tivo  
0247, 0749, 1749, Toshiba  
0724, 0819, 1856,  
1076, 1108, 0099, UltimateTV  
1109, 1414, 1442, Ultrasat  
1609, 1392, 1640  
1505, 1005, 0775, US Digital  
1170, 1775 USDTV  
1505, 1005, 0775, Voom  
GoldStar  
Hamlin  
Jerrold  
Uniden  
Memorex  
Motorola  
0000  
Dish Network System  
Dishpro  
1376, 0476, 0810,  
0276, 1187  
1877, 0237, 0008  
0000, 0008, 0107  
0000  
1305, 0317, 0025  
1877, 0877, 0144, GE  
0533  
0000  
0000  
0279, 0273  
0000  
0000, 0144  
1877, 0877, 0477,  
0008  
1006  
0003  
0276  
0003  
Pace  
1775  
Zenith  
0856, 1856  
Panasonic  
Paragon  
Philips  
Echostar  
1505, 1005, 0775,  
1170, 1775  
0775, 1775  
0566  
0869  
0775, 1775  
1535  
DBS/PVR Combination  
Expressvu  
Pioneer  
DirecTV  
1377, 0392, 0639,  
1142, 1076, 0099,  
1392, 1442, 1640  
1505, 0775  
1505, 0775  
1505, 0775, 1170  
0775  
General Instrument  
GOI  
Hisense  
Hitachi  
HTS  
Pulsar  
Quasar  
Regal  
Runco  
Samsung  
Scientific Atlanta  
Dish Network System  
Dishpro  
Echostar  
0819  
0775, 1775  
Hughes Network Systems 1142, 0749, 1749, Expressvu  
1442  
1790  
1535  
0775, 1170, 1775  
1414  
0724, 0722  
0724  
0749  
0869  
0869  
0247, 0701  
1807  
0724  
1142, 0749, 1749,  
0724, 1076, 0722,  
0099, 1442  
0392, 0566  
1535  
Hughes Network Systems 1142, 1442  
JVC  
Motorola  
Philips  
Proscan  
RCA  
Samsung  
Sony  
Star Choice  
Humax  
iLo  
JVC  
1170  
0869  
1142, 0099, 1442  
0392  
1392  
1442  
0639, 1640  
0869  
Sony  
Starcom  
Supercable  
Torx  
Toshiba  
Zenith  
LG  
Magnavox  
Memorex  
Mitsubishi  
Motorola  
Next Level  
Panasonic  
Pansat  
Paysat  
Philips  
0000  
0000, 0525, 0899  
Cable/PVR Combination  
Americast  
Digeo  
General Instrument  
Jerrold  
Motorola  
Pace  
Pioneer  
Scientific Atlanta  
Sony  
Supercable  
Zenith  
0899  
1187  
0810  
0810  
1376, 0810, 1187  
1877, 0237  
1877, 0877  
1877, 0877  
1006  
Proscan  
Proton  
RadioShack  
RCA  
0869  
0566, 0855, 0143,  
1392  
0276  
0899  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
VCR mode  
VCR  
VCR  
VCR  
ABS  
1972  
0048, 0209  
0000  
Fisher  
Fuji  
Funai  
Garrard  
0047, 0104, 0046  
0035, 0033  
0000, 0593, 1593  
0000  
Marta  
Matsushita  
0037  
0035, 0162, 0227,  
1162  
1972  
0035  
Admiral  
Adventura  
Aiko  
0278  
Media Center PC  
MEI  
Aiwa  
0037, 0000, 0307, Gateway  
1972  
0479  
0041, 0061, 0106  
1972  
0278  
0035  
0240  
0037, 0278  
0240  
GE  
0060, 0035, 0240, Memorex  
0202, 0760, 0761,  
0807, 1035, 1060  
0432, 0526  
0037, 0209, 0038,  
0225, 1237  
0035, 0162, 0037,  
0048, 0039, 0047,  
0240, 0000, 0104,  
0209, 0046, 0307,  
0479, 1037, 1048,  
1162, 1237, 1262  
0240, 0043, 0061  
0240  
Akai  
Alienware  
America Action  
American High  
Asha  
Go Video  
GoldStar  
Audiovox  
Gradiente  
Harley Davidson  
Harman/Kardon  
0000  
MGA  
Beaumark  
Bell & Howell  
Broksonic  
0000  
0081, 0038  
0072  
MGN Technology  
Microsoft  
Mind  
0104  
1972  
1972  
0184, 0121, 0209, Harwood  
0002, 0479, 1479  
0037  
0035  
0020  
0081  
0072, 0278  
0037, 0278, 1278  
0072  
0037, 0047, 0240, Hughes Network Systems 0042, 0739  
0072, 0271  
Headquarter  
Hewlett Packard  
HI-Q  
0046  
1972  
0047  
0037, 0240, 0000,  
Minolta  
Mitsubishi  
0042, 0105  
Calix  
0081, 0067, 0043,  
0041, 0061, 0173,  
0807  
0035, 0048  
0240, 0000  
Canon  
Capehart  
Carver  
CCE  
Citizen  
Colt  
Hitachi  
0042, 0041, 0105, Motorola  
1037  
1972  
1972  
MTC  
Multitech  
NEC  
Howard Computers  
HP  
0000, 0072  
0035, 0037, 0048,  
0104, 0067, 0041,  
0038, 0008  
0037  
1972  
0240  
1972  
0035  
1062, 0162, 0037,  
0048, 0104, 0432,  
0593, 1048, 1162,  
1262  
0184, 0121, 0209,  
0002, 0208, 0479,  
1479  
1062, 0035, 0162,  
0225, 0227, 0616,  
1035, 1162, 1262  
0035, 0037, 0240,  
0042, 0038, 1035,  
1237  
Craig  
Humax  
0739  
1972  
1972  
0041  
Curtis Mathes  
0060, 0035, 0162, Hush  
0041, 0760, 1035  
0240  
Nikko  
Niveus Media  
Noblex  
iBUYPOWER  
Jensen  
JVC  
Cybernex  
CyberPower  
Daewoo  
1972  
0045, 0067, 0041, Northgate  
0008, 0366, 1707, Olympus  
1945, 1774, 1775, Optimus  
1776, 1777  
0037, 0278  
0067, 0041, 0038  
0045, 0104, 0278,  
0020, 0046, 0561,  
1278  
0020  
1972  
0042  
0739  
0039, 0038  
0000  
0037  
Daytron  
Dell  
Denon  
DirecTV  
Durabrand  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
KEC  
Kenwood  
KLH  
Kodak  
LG  
0072  
Orion  
0035, 0037  
0037, 0045, 0042,  
0209, 0038, 1037  
1972  
0000, 0208  
0240, 0072  
0037  
Panasonic  
Penney  
Linksys  
Lloyd's  
Logik  
0037  
0032  
Emerson  
0035, 0037, 0184, LXI  
0240, 0045, 0000, Magnasonic  
0121, 0043, 0209, Magnavox  
0002, 0278, 1593,  
1479, 1278, 0593,  
0561, 0479, 0208, Magnin  
0593, 1278  
0035, 0039, 0081, Pentax  
0000, 0149, 0563, Philco  
0593, 1593, 1781  
0240  
0042, 0105  
0035, 0000, 0038  
0061  
Marantz  
0035, 0081  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
VCR mode  
PVR  
VCR  
VCR  
Philips  
0035, 0081, 0000, Symphonic  
0563, 0593, 0618, Systemax  
0739, 1081, 1181, Tagar Systems  
0000, 0593, 1593  
1972  
1972  
Howard Computers  
HP  
Hughes Network Systems 0739  
1972  
1972  
1266  
0037  
Tatung  
0081, 0045, 0000, Humax  
0067, 0041, 0008, Hush  
0739  
1972  
Pilot  
Pioneer  
Polk Audio  
Portland  
Presidian  
Profitronic  
Proscan  
0081, 0042, 0067  
0081  
0020  
1593  
0240  
0060, 0202, 0760, Tivo  
0761, 1060  
0072  
0039  
0046  
0046  
0035, 0162, 1035,  
1162  
0000, 1037  
0037  
0037  
0366  
iBUYPOWER  
JVC  
Linksys  
Media Center PC  
Microsoft  
1972  
1945  
1972  
1972  
1972  
1972  
1972  
1972  
0616, 1777  
0618, 0739  
0880  
0614, 0616  
0739  
0614, 0616  
0636, 1972  
1972  
1972  
1972  
0618, 0636, 0739  
1008, 1972, 1996  
1972  
Teac  
0000, 0041  
0035, 0162  
0035, 0037, 0000  
0000  
0618, 0636, 0739, Mind  
1996  
Technics  
Teknika  
Thomas  
Niveus Media  
Northgate  
Protec  
Pulsar  
Quarter  
Quartz  
Quasar  
TMK  
Toshiba  
0240, 0208  
0081, 0045, 0042, Panasonic  
0067, 0043, 0041, Philips  
0008, 0057, 0366, RCA  
0845, 1008, 1145, ReplayTV  
1972, 1996  
0037, 0240  
1972  
0240  
0045  
0038  
0045, 0061  
0037  
Samsung  
Sonic Blue  
Sony  
RadioShack  
Radix  
Randex  
RCA  
Totevision  
Touch  
Unitech  
Stack 9  
0060, 0035, 0240, Vector  
Systemax  
Tagar Systems  
Tivo  
Toshiba  
Touch  
0000, 0042, 0149, Vector Research  
0105, 0106, 0202, Video Concepts  
0760, 0761, 0807, Videomagic  
0880, 1035, 1060  
Videosonic  
0240  
Realistic  
0035, 0037, 0048, Viewsonic  
0047, 0000, 0104, Villain  
1972  
0000  
Viewsonic  
Voodoo  
1972  
1972  
0046  
0614, 0616  
1972  
Voodoo  
Wards  
1972  
ZT Group  
1972  
ReplayTV  
Ricavision  
Runco  
0060, 0035, 0048,  
0047, 0081, 0240,  
0000, 0042, 0072,  
0149, 0760  
0209, 0072  
0035, 0000, 0072  
0041, 0038  
0039, 0033, 0000,  
0209, 0034, 0479,  
1139, 1479  
1972  
DVD/PVR Combination  
0000  
0039  
Samsung  
0240, 0045, 0432,  
0739, 0760, 1014  
0048, 0039  
0000, 0067, 0209, Yamaha  
0041, 0271, 0479, Zenith  
1479  
Emerson  
White Westinghouse  
XR-1000  
Sanky  
Sansui  
Sanyo  
Scott  
0047, 0240, 0104,  
0046  
ZT Group  
0184, 0045, 0121,  
0043  
DBS/PVR Combination  
1945  
Sears  
0035, 0037, 0047,  
0000, 0042, 0104, Echostar  
0046, 0057, 0105, Hughes Network Systems 0739  
1237  
JVC  
1945  
0739  
0739  
Sharp  
0048, 0209, 0807, Philips  
0848, 1048  
0104, 0072  
0240  
0045, 0072  
0614, 0616  
0035, 0032, 0033, Alienware  
0000, 0034, 0636, CyberPower  
0639, 0640, 1032, Dell  
1232, 1972  
1972  
Samsung  
Shintom  
Shogun  
Singer  
Sonic Blue  
Sony  
PVR  
ABS  
1972  
1972  
1972  
1972  
0739  
1945  
1945  
1972  
1972  
DirecTV  
Dish Network System  
Echostar  
Stack 9  
STS  
Sylvania  
0042  
0035, 0081, 0000, Gateway  
0043, 0593, 1593, Hewlett Packard  
1781  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
DVD mode  
DVD Recorder  
1416  
DVD  
DVD  
Accurian  
Advent  
Aiwa  
Akai  
Alco  
1416  
1016  
0641  
0695, 0770, 0899  
0790  
Magnavox  
0503, 0539, 0646, Accurian  
0675, 0821, 1268  
0539  
Apex Digital  
1056  
1168  
1129  
0490  
0675, 1334  
1158  
0741, 1158, 1304,  
1730  
Marantz  
Memorex  
Microsoft  
Mintek  
Aspire Digital  
CyberHome  
Denon  
Funai  
Gateway  
Go Video  
0695, 0831, 1270  
0522, 1708  
0839, 0717  
1521, 0521  
0741  
Allegro  
Apex Digital  
0869  
0672, 0717, 0755, Mitsubishi  
0830, 1056, 1061  
1023  
NAD  
NEC  
Arrgo  
0785  
Aspire Digital  
Audiovox  
Blaupunkt  
Blue Parade  
Broksonic  
Cinea  
Cine Vision  
Citizen  
Coby  
1168  
0790  
0717  
0571  
0695  
0831  
0876, 0833, 0869  
1277  
0778, 1107  
0831  
Nesa  
0717  
1402  
iLo  
JVC  
LG  
LiteOn  
Magnavox  
1348  
1164  
0741  
NexxTech  
Norcent  
Onkyo  
Oritron  
Panasonic  
1003, 1107  
0503, 0627  
0651  
0490, 0703, 1362, Panasonic  
1462, 1490, 1762 Philips  
0503, 0539, 0646, Pioneer  
0675, 0854, 1158, RCA  
1260, 1267, 1354  
0525, 0571, 0631  
1061  
0539  
0770  
0675  
1158, 1416, 1440  
0646, 0675  
0490  
0646, 1158  
0631  
0522  
0490, 1470  
1158  
Philips  
Craig  
Curtis Mathes  
CyberHome  
Samsung  
Sensory Science  
Sharp  
Sony  
Sylvania  
Zenith  
1087  
Pioneer  
0816, 0874, 1023, Polaroid  
1024, 1117, 1129 Polk Audio  
0784, 0705, 0770, Portland  
0833, 0869, 1169, Presidian  
0630, 0675  
1033, 1431  
0675  
Daewoo  
0741  
1172  
Prima  
1016  
Denon  
Disney  
Durabrand  
DVD2000  
Emerson  
0490, 0634  
0675, 1270  
1127  
0521  
0591, 0675, 0821,  
1268  
Proscan  
Pro Vision  
Qwestar  
RCA  
0522  
0778  
0651  
Home Theater in Box  
Aiwa  
0641  
0790  
1770, 1771, 1772,  
1773  
0522, 0571, 0717, Audiovox  
0790, 0822, 1022, JVC  
1132  
Enterprise  
ESA  
Fisher  
Funai  
Gateway  
GE  
Go Video  
0591  
0821, 1268  
0670  
0675, 1268, 1334  
1158  
0522, 0815, 0717  
0744, 0715, 0741, Sansui  
0783, 0833, 0869, Sanyo  
1044, 1075, 1099, Sensory Science  
Rio  
Rotel  
Sampo  
Samsung  
0869  
0623  
0752  
KLH  
Koss  
Oritron  
0790  
0651  
0651  
0539  
0790  
0869  
0869  
0790  
0490, 0573, 0744, Polk Audio  
0820, 0899, 1044, RCA  
1075, 1470  
0695  
0670, 0695, 0873  
1158  
Rio  
Sonic Blue  
Teac  
Venturer  
0790  
1158, 1304, 1730  
0741  
0717  
0582, 0702  
0573, 0664, 1247  
0672  
1500, 1588  
1348  
0717  
1268  
0627  
0702  
Sharp  
0630, 0675, 0752,  
1256  
1117  
GoldStar  
Greenhill  
Harman/Kardon  
Hitachi  
Hiteker  
Humax  
iLo  
Sharper Image  
Sherwood  
Shinsonic  
Sonic Blue  
Sony  
0770  
0533, 0839  
0869, 1099  
0533, 1533, 0864,  
1033, 1431, 1536  
0821  
0675, 0821, 1268  
0675, 0821  
0717, 0790  
0490, 0703  
0571  
Initial  
Superscan  
Sylvania  
Symphonic  
Teac  
Insignia  
Integra  
JBL  
Jensen  
JVC  
1016  
Technics  
0558, 0623, 0867, Theta Digital  
1164, 1602, 1770, Tivo  
1503  
1771, 1772, 1773  
0790  
0490, 0534  
0717, 0790, 1149  
0651  
Toshiba  
0503, 0695, 1045,  
1154, 1503, 1515,  
1588  
0503  
0839  
Kawasaki  
Kenwood  
KLH  
Urban Concepts  
US Logic  
Venturer  
Xbox  
Yamaha  
Koss  
Lasonic  
Lenoxx  
LG  
0798  
1127  
0790  
0522, 1708  
0490, 0539, 0545  
0503, 0591, 0741,  
0869  
0591, 0741, 0869  
1058, 1158, 1416, Zenith  
1440  
LiteOn  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote  
Audio mode  
Amplifier  
Receiver  
Home Theater in Box  
Amstrad  
Bose  
0078  
Koss  
1366, 1497  
1798  
Aiwa  
1388, 1641  
1563, 1615  
1563, 1615  
1609  
0674  
Lasonic  
Lenoxx  
LG  
Amphion Media Works  
AMW  
Curtis Mathes  
Durabrand  
GE  
0300  
1437  
1561  
1293, 1869  
1497  
Anam  
0078  
Liquid Video  
Magnavox  
Apex Digital  
1257, 1430  
1390  
Harman/Kardon  
JVC  
0892  
1189, 1269, 0531, Audiovox  
1514 Bose  
1189, 1269, 0891, Cambridge Soundworks  
0331  
1229, 1933  
1370  
Left Coast  
Lenoxx  
Linn  
0892  
Marantz  
1561  
1289  
Classic  
Coby  
1352  
0269, 0282, 0829  
0892, 0269  
0264  
Mitsubishi  
NexxTech  
Norcent  
Nova  
1393  
1389  
Marantz  
NEC  
1751  
Criterion  
Daewoo  
Denon  
1420  
1389, 1751  
1389  
1250  
Optimus  
Philips  
0300, 0823  
0892, 0269  
0013, 0300, 0823  
0892, 0269  
0300, 0823  
0264  
2832  
Onkyo  
0135, 0842, 1298, Durabrand  
1561  
Pioneer  
Polk Audio  
RCA  
1320, 1531  
Gateway  
Go Video  
Initial  
1517  
Optimus  
Oritron  
1023, 0531, 1074  
1366, 1497  
1532  
1426  
Shure  
Panasonic  
1308, 1518, 0367, Insignia  
1288, 1316, 1548, Integra  
1751  
Sony  
0689, 0815, 1126  
0078  
1298  
Soundesign  
Victor  
1633, 1763, 1764  
JBL  
1306  
0331  
Philips  
1189, 1269, 0891, JVC  
1266, 1289, 1673  
1374, 1495, 1676,  
1871  
Wards  
0078, 0013  
0354, 0133  
Yamaha  
Pioneer  
1023, 0014, 0150, KLH  
0531, 0630, 1123, Koss  
1390, 1412  
1366, 1497  
1798  
1384, 1823  
1508  
Lasonic  
Receiver  
Polaroid  
Lenoxx  
LG  
1561  
ADC  
Aiwa  
0531  
Polk Audio  
1289, 1414  
1254  
1293, 1869  
1497  
1405, 0121, 1243, Proscan  
Liquid Video  
1388, 1641  
1512  
RCA  
1023, 1609, 1254, Magnavox  
0531, 1074, 1123, NexxTech  
1514  
Akai  
Alco  
1751  
1390  
1390, 1511  
1437  
Norcent  
Nova  
1389, 1751  
1389  
Amphion Media Works  
AMW  
1563, 1615  
1563, 1615  
1609, 1074  
1257, 1430  
1189  
Regent  
Rio  
1869  
Onkyo  
1298, 1531  
1366, 1497  
1288, 1316, 1548,  
1633, 1763, 1764  
1266, 1673  
1384  
Anam  
Saba  
0531, 1519  
1295, 1500  
1764  
Oritron  
Panasonic  
Apex Digital  
Audiotronic  
Audiovox  
Samsung  
Sansui  
Sanyo  
1390  
1251, 1469  
0771, 1286  
1556  
Philips  
Pioneer  
Polaroid  
Polk Audio  
RCA  
Bose  
1229, 0639, 1841, Sharp  
1933  
1602  
1370  
0531  
1189  
1352  
1389  
1420  
1250  
1414  
Sharper Image  
1508  
Brix  
Sherwood  
Shinsonic  
Sirius  
1517, 1653  
1426  
1289  
Cambridge Soundworks  
Capetronic  
Carver  
1609, 1390, 1511  
1437  
1602  
Regent  
Rio  
Sonic Blue  
Sony  
1532, 1869  
1869  
Classic  
1058, 1441, 1258, Saba  
1759, 1622, 0474, Samsung  
1406, 1558, 1658, Sanyo  
1519  
Coby  
1295, 1500  
1469  
Criterion  
Daewoo  
Delphi  
1758, 1858, 1958  
1023  
Sharper Image  
1556  
Stereophonics  
Sherwood  
Shinsonic  
1517  
Denon  
1360, 0771, 1142, Sunfire  
1313  
1426  
1660, 2832  
0463  
Teac  
0463, 1074, 1390, Sonic Blue  
1532, 1869  
0689, 1622, 1558,  
1658, 1758, 1858,  
1958  
Garrard  
1528  
Sony  
Gateway  
1517  
Technics  
Thorens  
1308, 1518, 1384  
1189  
Go Video  
1532  
Harman/Kardon  
0110, 0891, 1304, Toshiba  
1788  
Teac  
1390, 1528  
1788  
1306  
Venturer  
Wards  
XM  
1390  
Toshiba  
Venturer  
Yamaha  
Initial  
Insignia  
Integra  
JBL  
1426  
0014  
1390  
1751  
1406, 1414  
1331, 1375  
1293  
0135, 1298, 1320  
0110, 1306  
Yamaha  
0176, 1176, 1276, Zenith  
1331, 1375, 1476  
0857, 1293  
JVC  
0531, 1374, 1495, Zenith  
1560, 1676, 1871,  
1894  
Kenwood  
KLH  
1313, 1570, 1569  
1390, 1412  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact the  
JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
• The antenna could be disconnected.  
• The tuner could be set improperly. See page 25.  
• The TV station may be having difficulties. Check to see if other stations are working.  
There is no picture  
or sound  
• Use the HDMI cable with HDMI logo  
. See page 52.  
• You cannot output audio using the DIGITAL AUDIO OPTICAL OUTPUT when you  
have digital sound from an HDMI device connected to the INPUT-1, INPUT-2 or  
INPUT-5 connection on the back of the TV.  
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p, 1080i  
and 1080p signals. Please check your settings.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• You may be too far from the TV. You must be within 23 feet (7 meters).  
• Make sure nothing is connected to the IR IN terminal except for an IR device.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the Off Timer is set. See page 33.  
• Check to see if the Sleep Timer was set. See page 43.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly,  
remove the electrical plug from the wall outlet and wait a while before inserting it  
into the wall outlet again and operating the television.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 34.  
• The Video Status mode may be turned to the wrong setting. See page 34.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or  
vacuum, operating nearby. Move the antenna away from the appliance or change  
to a coaxial cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
• Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu,  
page 32.  
Stereo or bilingual  
programs can't be  
heard  
• Make sure the MTS settings are correct. See page 23.  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The screen  
• This occurs when you select a digital menu when your input source is from the  
disappears except for HDMI connection. Press the menu button.  
the menu screen  
My HDMI device  
doesn’t work or  
• Please use a High Speed HDMI™ Cable. High Speed HDMI™ Cables are tested  
to carry an HD signal up to 1080p and higher.  
doesn’t work properly  
“Weak Signal”  
appears  
• This OSD appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
“No Program”  
appears  
• It appears when that channel is not receiving a signal and you have the Noise  
Muting function OFF and you have a single screen. It moves automatically every  
two seconds to prevent the screen from burn-in.  
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto  
shut off functions that you set, are still active.  
• If you are watching an analog channel, NO PROGRAM does not appear.  
The following are not malfunctions.  
• The television may make a creaking sound if the temperature of the room or the temperature  
of the inside of the television changes. If there is no problem with the screen or sound, then  
there is no need to worry.  
• The picture may be temporarily disturbed and noise may be seen on the screen if the power  
is turned on immediately after it has been turned off. This is not a malfunction.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model  
LT-42X899  
LT-47X899  
LT-52X899  
Type  
LCD Flat Television  
Reception Format  
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
Reception Range  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands  
(191 channel frequency synthesizer system) at Analog  
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers)  
is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
Power Consumption  
229W  
299W  
299W  
42 inch / 106.73 cm  
measured diagonally,  
16:9 ratio  
46.9 inch / 119.28 cm  
measured diagonally,  
16:9 ratio  
52 inch / 132.17 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
4.5 x 16cm Twin Oblique Cone x 2  
Antenna Terminal  
(VHF/UHF,  
75 ohms (VHF/UHF)(F-type connector)  
ATSC/DIGITAL  
CABLE IN)  
480i  
S (Input 4)  
Input 3, 4, 5 Terminal  
(Composite Terminal)  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
Input 3, 4 Terminal  
1080i / 720p / 480p / 480i  
(Component Terminal)  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p 75 ohms  
Video: 1080/60p / 1080/30p / 1080/24p / 1080i / 720p / 480p / 480i  
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit  
Input 1, 2, 5 Terminal  
(HDMI Input Terminal)  
Analog RGB D-SUB (15 pin) x 1  
PC Input Jacks  
Audio Output Jacks  
(FIX)  
FIX : 500mVrms (-4dBs), Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
39 3/4 x 27 7/8 x 11 3/4  
44 1/4 x 30 1/2 x 11 3/4  
(with stand)  
1121 x 773.7 x 296  
(with stand)  
48 x 32 5/8 x 13 5/8  
(with stand)  
1217.4 x 825.5 x 345.7  
(with stand)  
Dimensions (inch/mm)  
W X H X D  
(with stand)  
1007 x 707.2 x 296  
(with stand)  
39 3/4 x 26 x 5 1/8  
(without stand)  
44 1/4 x 28 5/8 x 5 1/8  
(without stand)  
48 x 30 3/4 x 5 3/8  
(without stand)  
1007 x 660 x 129.1  
(without stand)  
1121 x 726.5 x 129.8  
(without stand)  
1217.4 x 778.5 x 135  
(without stand)  
59.4 / 27 (with stand)  
44 / 25 (without stand)  
74.8 / 34 (with stand)  
66 / 30 (without stand)  
86.2 / 39.2 (with stand)  
Weight (lbs / kg)  
76.8 / 34.9 (without stand)  
Specifications subject to change without notice.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
USA ONLY  
2-2  
LIMITED WARRANTY  
ONLY FOR PRODUCT PURCHASED IN U.S.A.  
2 YRS  
2 YRS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN THE COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Please do not return your product to the retailer  
Instead, return your product to the JVC authorized service center nearest you. If shipping the product to the service  
center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of  
the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations  
can also be obtained from our website http://www.jvc.com. If your product qualifies for in-home service, the service  
representative will require clear access to the product.  
WHAT IS NOT COVERED:  
JVC AMERICAS CORP.  
For customer use:  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
TO OUR VALUED CUSTOMER  
THANK YOU FOR PURCHASING THIS JVC PRODUCT.  
WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.  
NEED HELP ON HOW TO HOOK UP?  
NEED ASSISTANCE ON HOW TO OPERATE?  
NEED TO LOCATE A JVC SERVICE CENTER?  
LIKE TO PURCHASE ACCESSORIES?  
IS HERE TO HELP!  
TOLL FREE: 1(800)252-5722  
http://www.jvc.com  
Remember to retain your Bill of Sale for Warranty Service.  
Do not attempt to service the product yourself  
Caution  
To prevent electrical shock, do not open the cabinet.  
There are no user serviceable parts inside.  
Please refer to qualified service personnel for repairs.  
BT-51029-4Q  
(
)
0807  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC Loves the Earth  
Digital Television Transition Notice:  
This device contains a digital television tuner, so it should receive digital over the air TV  
programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the  
United States on February 17, 2009.  
Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive  
over the air digital programming, but should continue to work as before for other  
purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching  
pre-recorded movies, or playing video games).  
For more information, see http://www.DTV.gov or call 1-888-CALL-FCC. For converter box  
information, see http://www.dtv2009.gov or call the NTIA at 1-888-DTV-2009.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Blender NS PB01 User Manual
Intel Stereo Amplifier ReValver MK III User Manual
Iron A Way Iron NE 242 User Manual
Jacuzzi Hot Tub S198 User Manual
John Deere Electric Heater AC 115 User Manual
JVC Computer Monitor GM P421U User Manual
JVC Projector DLA G150HTE User Manual
JVC Staple Gun HR J633U User Manual
KitchenAid Garbage Disposal KCDB250S1 User Manual
KitchenAid Ventilation Hood 9763388 User Manual