Dear Customer,
Thank you for purchasing this digital
video camera. Before use, please
read the safety information and
precautions contained in the pages
3 – 4 and 10 to ensure safe use of
this product.
ENGLISH
DIGITAL VIDEO CAMERA
6
GETTING STARTED
GR-D280
VIDEO RECORDING &
PLAYBACK
18
DIGITAL STILL CAMERA
(D.S.C.) RECORDING &
Please visit our Homepage on the World Wide Web for
Digital Video Camera:
PLAYBACK
25
31
47
For Accessories:
ADVANCED FEATURES
REFERENCES
TERMS
Back cover
To deactivate the demonstration,
set “DEMO MODE” to “OFF”.
(੬ pg. 31, 33)
INSTRUCTIONS
EN
LYT1447-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
SAFETY PRECAUTIONS
CAUTIONS:
● This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible
anywhere.
● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC
BN-VF707U/VF714U/VF733U battery packs
and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided
multi-voltage AC Adapter. (An appropriate
conversion adapter may be necessary to
accommodate different designs of AC outlets in
different countries.)
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTIONS:
● To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.
● When you are not using the AC Adapter for a
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
CAUTION:
To avoid electric
shock or damage to
the unit, first firmly
insert the small end
of the power cord into
the AC Adapter until it
is no longer wobbly,
and then plug the
larger end of the
power cord into an
AC outlet.
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
● Dispose of used battery promptly.
● Keep away from children.
● Do not disassemble and do not dispose of in
fire.
NOTES:
● The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
● The rating information and safety caution of the
AC Adapter are on its upper and lower sides.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm or more on
both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
When carrying, be sure to always securely attach
and use the provided strap. Carrying or holding
the camcorder by the viewfinder and/or the LCD
monitor can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the
cassette holder cover. Do not let children operate
the camcorder, as they are particularly
susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to
the camcorder and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Provided Accessories ..................................... 11
Power.............................................................. 13
Date/Time Settings ......................................... 15
Tripod Mounting.............................................. 16
Loading/Unloading A Cassette ....................... 16
Loading/Unloading A Memory Card................ 17
Spot Exposure Control.................................... 40
Audio Dubbing ................................................ 46
VIDEO RECORDING & PLAYBACK
VIDEO RECORDING ........................................... 18
Basic Recording.............................................. 18
Tape Remaining Time ................................ 18
LCD Monitor And Viewfinder ...................... 18
Zooming...................................................... 19
Journalistic Shooting .................................. 19
Quick Review.............................................. 20
Recording From The Middle Of A Tape...... 20
VIDEO PLAYBACK ............................................. 20
Normal Playback............................................. 20
Still Playback .............................................. 20
Blank Search .............................................. 21
Playback Using The Remote Control.............. 23
REFERENCES
47
CAUTIONS ........................................................ 52
25
SPECIFICATIONS................................................ 55
DIGITAL STILL CAMERA (D.S.C.) RECORDING
& PLAYBACK
D.S.C. RECORDING............................................ 25
Basic Shooting (D.S.C. Snapshot).................. 25
Interval Shooting......................................... 25
TERMS
Back cover
D.S.C. PLAYBACK.............................................. 26
Normal Playback Of Images........................... 26
Auto Playback Of Images ............................... 27
Index Playback Of Files.................................. 27
Removing On-Screen Display ........................ 27
ADDITIONAL FEATURES FOR D.S.C. .................... 28
Dubbing Still Images Recorded On A Tape To A
Memory Card.............................................. 28
Resetting The File Name................................ 28
Protecting Files............................................... 28
Deleting Files.................................................. 29
Setting Print Information (DPOF Setting)........ 29
Initialising A Memory Card.............................. 30
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
7
Controls
A Stop Button [8] (੬ pg. 20)
X Viewfinder (੬ pg. 16)
Index Button [INDEX] (੬ pg. 27)
Backlight Compensation Button [BACK
LIGHT] (੬ pg. 40)
Y Card Cover [MEMORY CARD] (੬ pg. 17)
Z Battery Pack Mount (੬ pg. 13)
a Shoulder Strap Eyelet (੬ pg. 11)
B Play/Pause Button [4/9] (੬ pg. 20)
C Rewind Button [3] (੬ pg. 20)
Menu select Button [–] (੬ pg. 15)
Quick Review Button [ ] (੬ pg. 20)
D Fast-Forward Button [5] (੬ pg. 20)
Night Button [NIGHT] (੬ pg. 38)
E Menu Button [MENU] (੬ pg. 31)
Data Battery Button [DATA] (੬ pg. 14)
F VIDEO/MEMORY Switch (੬ pg. 14)
H Dioptre Adjustment Control (੬ pg. 16)
I Snapshot Button [SNAPSHOT]
(੬ pg. 25, 38)
e LED Light (੬ pg. 37)
(When using an optional conversion lens, it
may cover this area and block the light.)
f Remote Sensor (੬ pg. 23)
g Camera Sensor
(Be careful not to cover this area, a sensor
necessary for shooting is built-in here.)
h Stereo Microphone (੬ pg. 46)
k Cassette Holder Cover (੬ pg. 16)
Live Slow Button [SLOW] (੬ pg. 31, 37)
Speaker Volume Control [VOL. +, –]
(੬ pg. 20)
K Battery Release Button [PUSH BATT.]
(੬ pg. 13)
L Recording Start/Stop Button (੬ pg. 18)
M Power Switch [A, M, PLAY, OFF] (੬ pg. 14)
N Lock Button (੬ pg. 14)
O Cassette Open/Eject Switch [OPEN/EJECT]
(੬ pg. 16)
Connectors
The connectors are located beneath the covers.
P USB (Universal Serial Bus) Connector
(੬ pg. 45)
Q S-Video/Audio/Video Output Connector [S/
AV] (੬ pg. 22, 43)
R DC Input Connector [DC] (੬ pg. 13)
S Digital Video Connector [DV OUT] (i.Link*)
(੬ pg. 44, 45)
T Microphone connector [MIC] (੬ pg. 34, 46)
(An optional microphone can be used during
video recording and audio dubbing. To
stabilise the microphone, use of an optional
shoe adapter is recommended.)
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.
Indicators
U POWER/CHARGE Lamp (੬ pg. 13, 18)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
8
EN
34
5
6
During Video Recording Only
234 5
1
6
15
1h40m
7
REC
7
8
a Image Size: 1024 (1024 x 768) or 640
B Interval Shooting Icon (੬ pg. 25)
C Shooting Icon (੬ pg. 25)
(Appears and blinks during shooting.)
D Card Icon (੬ pg. 25)
e
w
SOUND 12BIT
15:55
: Appears during shooting.
: Blinks in white when a memory card is
reading the data in the memory card.
q
a Selected Wipe/Fader Effect Indicator
(੬ pg. 41)
(Rotates while tape is running.)
C Selected Wide Mode Indicator (੬ pg. 33)
E Picture Quality:
(FINE) and
(STANDARD) (in order of quality) (੬ pg. 34)
F Remaining Number Of Shots (੬ pg. 25)
(Displays the approximate remaining number
of shots that can be stored during D.S.C.
D
: Live Slow Indicator (੬ pg. 37)
: Snapshot Indicator (੬ pg. 38)
E Recording Speed Mode (SP/LP) (੬ pg. 32)
F Tape Remaining Time (੬ pg. 18)
G REC: (Appears during recording.) (੬ pg. 18)
PAUSE: (Appears during Record-Standby
mode.) (੬ pg. 18)
H Insert Editing/Insert Editing Pause Mode
(੬ pg. 46)
I 5S/Anim.: Displays the 5-Second Recording
mode or Animation recording mode.
(੬ pg. 33)
J Wind Cut Indicator (੬ pg. 33)
K Time Code (੬ pg. 34, 36)
G Clock Icon (੬ pg. 25)
During Both Video And D.S.C. Recording
8
9
1
2
25
x
W
T
O
0
3
4
5
6
q
w
L Digital Image Stabiliser (“DIS”) (੬ pg. 32)
M SOUND 12BIT/16BIT: Sound Mode Indicator
(੬ pg. 32) (Appears for approx. 5 seconds
after turning on the camcorder.)
50m
7
BRIGHT
10
.
11. 05
10: 00
: Auxiliary Microphone Level
Indicator
(Appears when an optional microphone is
L
r
a Operation Mode (੬ pg. 14)
e
R
B
: Night-Scope Indicator (੬ pg. 38)
: Gain Up Mode (੬ pg. 32)
connected. ੬ pg. 34, “AUX MIC” )
C LED Light Indicator (੬ pg. 37)
D White Balance Indicator (੬ pg. 41)
E
: Spot Exposure Control Indicator
(੬ pg. 40)
: Backlight Compensation Indicator
(੬ pg. 40)
: Exposure Adjustment Indicator (੬ pg. 39)
F Selected Program AE With Special Effects
Indicator (੬ pg. 42)
G Iris Lock Indicator (੬ pg. 39)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
9
H Approximate Zoom Ratio (੬ pg. 19)
I Zoom Indicator (੬ pg. 19)
J O: (Appears when taking Snapshot.)
(੬ pg. 25, 38)
SLOW: (Appears when using Live Slow.)
(੬ pg. 37)
I VOLUME: Volume Level Indicator (੬ pg. 20)
BRIGHT: Brightness Control Indicator (LCD
monitor/Viewfinder) (੬ pg. 16)
J Time Code (੬ pg. 34, 36)
K
: Auxiliary Microphone Level
Indicator
L
R
K Brightness Control Indicator (LCD monitor/
Viewfinder) (੬ pg. 16)
(Appears when an optional microphone is
connected during Audio Dubbing. ੬ pg. 46)
L Battery Remaining Power Indicator
(੬ pg. 49)
M Date/Time (੬ pg. 15)
During D.S.C. Playback
1
2
N Manual Focus Adjustment Indicator
(੬ pg. 38)
100-0013
50m
During Video Playback
1
BR I GHT
2
3 4 5
6
12B I T / M I X
L
4
3
a Operation Mode Indicator (੬ pg. 27)
B Folder/File Number (੬ pg. 27)
C Battery Remaining Power Indicator
(੬ pg. 49)
D Brightness Control Indicator (LCD monitor/
Viewfinder) (੬ pg. 16)
MIC
BLANK SEARCH
PUSH "STOP" BUTTON
TO CANCEL
50m
L
VOLUME
7
q
R
1 0
.
11. 05
10: 0 0
20 : 21 : 25
0
9
a Sound Mode Indicator (੬ pg. 35)
B Blank Search Indicator (੬ pg. 21)
C
: Live Slow Indicator (੬ pg. 37)
: Snapshot Indicator (੬ pg. 35, 38)
D Tape Speed (੬ pg. 32)
E 4: Playback
5: Fast-Forward/Shuttle Search
3: Rewind/Shuttle Search
9: Pause
9 U: Forward Frame-By-Frame Playback/
Slow-Motion
Y 9: Reverse Frame-By-Frame Playback/
Slow-Motion
D: Audio Dubbing
9D: Audio Dubbing Pause
(Appear while a tape is running.)
F Sound Input For Audio Dubbing (੬ pg. 46)
G Battery Remaining Power Indicator
(੬ pg. 49)
H Date/Time (੬ pg. 34, 36)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
10
®
®
Before Using This Camcorder
● Microsoft and Windows are either registered
trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
Make sure you only use cassettes with the Mini
DV mark
Make sure you only use memory cards with the
mark or
.
● Macintosh is a registered trademark of Apple
Computer, Inc.
● QuickTime is a registered trademark of Apple
Computer, Inc.
.
This camcorder is designed exclusively for the
digital video cassette, SD Memory Card and
MultiMediaCard. Only cassettes marked “
” and
memory cards marked “
” or
“
” can be used with this unit.
Remember that this camcorder is not
compatible with other digital video formats.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is
prohibited. (Even if you record an event such as a
show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Before recording important video, be sure to
make a trial recording.
Play back your trial recording to make sure the
video and audio have been recorded properly.
We recommend cleaning your video heads
before use.
If you haven’t used your camcorder for a while, the
heads may be dirty. We recommend periodically
cleaning the video heads with a cleaning cassette
(optional).
Be sure to store your cassette tapes and
camcorder in the proper environment.
Video heads can become dirty more easily if your
cassette tapes and camcorder are stored in a dusty
area. Cassette tapes should be removed from the
camcorder and stored in cassette cases. Store the
camcorder in a bag or other container.
Use SP (Standard) mode for important video
recordings.
LP (Long Play) mode lets you record 50% more
video than SP (Standard) mode, but you may
experience mosaic-like noise during playback
depending on the tape characteristics and the
usage environment.
So, for important recordings, we recommend using
SP mode.
It is recommended that you use JVC brand
cassette tapes.
Your camcorder is compatible with all brands of
commercially available cassette tapes complying
with the MiniDV standard, but JVC brand cassette
tapes are designed and optimized to maximize the
performance of your camcorder.
Also read “CAUTIONS” on pages 52 – 54.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
11
NOTES:
Provided Accessories
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
● Make sure to use the provided cables for
connections. Do not use any other cables.
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
a AC Adapter AP-V17E
b Battery Pack BN-VF707U
c S/AV Cable
d USB Cable
e Core Filter (for USB cable, ੬ pg. 12 for
attachment)
f CD-ROM
g Cable Adapter
Place here during
shooting.
h Remote Control Unit RM-V720U
i Lithium Battery CR2025* (for remote control
unit)
How To Attach The Shoulder Strap
j Shoulder Strap (see the right column for
attachment)
k Lens Cap (see the right column for
attachment)
* A lithium battery is pre-installed in the Remote
Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.
Follow the illustration.
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap
guide and the buckle.
● To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Buckle
Strap guide
2
3
1
Eyelet
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
12
How To Attach The Core Filter
Attach the core filters to the cables. The core
filter reduces interference.
1 Release the stoppers on both ends of the
core filter.
Stopper
2 Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.
Core filter
3 cm
Wind once.
3 Close the core filter until it clicks shut.
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the
core filter to the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
13
To detach the battery pack
Power
Slide the battery pack upward while pressing
PUSH BATT. to detach it.
This camcorder’s 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.
Battery pack
BN-VF707U*
Charging time
Approx. 1 hr. 30 min.
Approx. 2 hr. 40 min.
Approx. 5 hr. 40 min.
BN-VF714U
BN-VF733U
* Provided
Charging The Battery Pack
Power switch
M
A
OFF PLAY
POWER/CHARGE lamp
NOTES:
POWER/
CHARGE
● It is recommended that only genuine JVC
Battery pack mount
PUSH BATT.
batteries are used in this camcorder. Using
generic non-JVC batteries can cause damage to
the internal charging circuitry.
● If the protective cap is attached to the battery
pack, remove it first.
● During charging, the camcorder cannot be
operated.
Battery pack
● Charging is not possible if the wrong type of
battery is used.
Arrow
mark
● When charging the battery pack for the first time
or after a long storage period, the POWER/
CHARGE lamp may not light. In this case, remove
charging again.
To DC connector
Open the cover.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
To AC outlet
● Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
AC Adapter
● Using the optional AA-VF7 Battery Charger, you
can charge the BN-VF707U/VF714U/VF733U
battery pack without the camcorder.
● After 5 minutes has elapsed in Record-Standby
mode with the cassette inserted, the camcorder
will automatically turn off its power supplied from
the AC adapter. In this case, the battery charge
starts if the battery is attached to the camcorder.
1 Set the Power Switch to “OFF”.
2 With the arrow on the battery pack pointing
downward, push the battery pack slightly against
the battery pack mount a.
3 Slide down the battery pack until it locks in
place b.
4 Connect the AC Adapter to the camcorder.
Using The Battery Pack
Perform steps 2 – 3 in “Charging The Battery
Pack”.
5 Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder
blinks to indicate charging has started.
Maximum continuous recording time
6 When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.
LCD monitor
Battery pack
Viewfinder on
on
BN-VF707U*
BN-VF714U
BN-VF733U
* Provided
1 hr. 5 min.
2 hr. 20 min.
5 hr. 25 min.
1 hr. 25 min.
3 hr.
7 hr. 5 min.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
14
To resume the original function of the
accurate battery power indication
NOTES:
● Recording time is reduced significantly under the
following conditions:
If the battery power indication differs from the
actual operating time, fully charge the battery, and
then run it down. However this function may not
turn back if the battery was used for a long period
of time under extremely high/low temperature
condition or charged too many times.
• Zoom or Record-Standby mode is engaged
repeatedly.
• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.
• The LED Light is used.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
Operation Mode
To turn on the camcorder, set the Power Switch
to any operation mode except “OFF” while
pressing down the Lock Button located on the
switch.
ATTENTION:
Before detaching the power source, make sure that
the camcorder’s power is turned off. Failure to do so
can result in a camcorder malfunction.
Power Switch
MENU/DATA
Data Battery System
You can check the remaining battery power and
the recordable time.
Lock Button
1) Make sure the battery is attached and the
M
A
Power Switch is set to “OFF”.
POWER/
CHARGE
2) Open the LCD monitor fully.
3) Press DATA, and the battery status screen
POWER/
CHARGE lamp
appears.
● It can be displayed on the viewfinder when the
LCD monitor is closed.
VIDEO/MEMORY
● It is displayed for 3 seconds if the button is
pressed and released quickly, and for 15
seconds if the button is pressed and hold for
several seconds.
Choose the appropriate operation mode
according to your preference using the Power
Switch and VIDEO/MEMORY Switch.
● If “COMMUNICATION ERROR” appears
instead of the battery status even though you
tried to press DATA several times, there may
be a problem on the battery. In such a case,
consult your nearest JVC dealer.
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects
or manual adjustments. Suitable for standard
recording.
The “A” indicator appears on the display.
Using AC Power
Perform step 4 in “Charging The Battery Pack”.
M (Manual Recording):
Allows you to set various recording functions
using the Menus. (੬ pg. 31)
If you want more creative capabilities than Full
Auto Recording, try this mode.
NOTE:
The provided AC Adapter features automatic
voltage selection in the AC range from 110 V to
240 V.
OFF:
About Batteries
Allows you to switch off the camcorder.
DANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive
heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its
terminals to come in contact with metals, as this
can result in a short circuit and possibly start a
fire.
PLAY:
● Allows you to play back a recording on the
tape.
● Allows you to display a still image stored in
the memory card or to transfer a still image
stored in the memory card to a PC.
● Allows you to set various playback functions
using the Menus. (੬ pg. 31)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
15
VIDEO/MEMORY Switch Position
VIDEO:
Allows you to record on a tape or play back a
tape. If “REC SELECT” is set to “
Date/Time Settings
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (੬ pg. 31, 36)
/
”
(੬ pg. 35), still images are recorded both on
the tape and the memory card.
1 Perform steps 1 – 4 in “Language Settings”
on the left column.
MEMORY:
● Allows you to record in a memory card or
access data stored in a memory card.
2 Press + or – to select “CLOCK ADJ.”, and
press MENU. The parameter for “Day” is
highlighted.
the currently selected image size appears.
CAMERA DISPLAY
3 Press + or – to input
the day, and press MENU.
Repeat to input the month,
year, hour and minute.
Power-Linked Operation
When the Power Switch is set to “A” or “M”, you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
CLOCK
ADJ .
20. 1 2. 0 5
3 0
1
7
:
4 Press + or – to select
“BRETURN”, and press
MENU twice. The Menu
Screen closes.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
Grip Adjustment
1 Adjust the velcro strip.
2 Pass your right hand
through the loop and grasp
the grip.
Language Settings
3 Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
The language on the display can be changed.
(੬ pg. 31, 34, 36)
1 Set the Power Switch to “M” while pressing
down the Lock Button located on the switch.
2 Open the LCD monitor fully. (੬ pg. 18)
3 Press MENU. The Menu Screen appears.
sure to fasten the velcro strip to your preference.
CAMERA DISPLAY
4 Press + or – to select
BRIGHT
“n”, and press MENU.
ON SCREEN
DATE / T I ME
T I ME CODE
LANGUAGE
AUX M I C
CLOCK
–
–
–
–
–
LCD / TV
AUTO
The CAMERA DISPLAY
Menu appears.
OFF
ENGLISH
ON
20. 1 2. 0 5
1
ADJ .
7
:
3 0
5 Press + or – to select
“LANGUAGE”, and press
MENU.
RETURN
CAMERA DISPLAY
6 Press + or – to select
the desired language, and
press MENU.
ENGLISH
FRANÇAIS
– DEUTSCH
ESPAÑOL
ITALIANO
LANGUAGE
7 Press + or – to select
“BRETURN”, and press
MENU twice. The Menu
Screen closes.
NEDERLANDS
PORTUGUÊS
РУССКИЙ
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
16
7 Press MENU to clear the brightness control
Viewfinder Adjustment
indicator from the display.
1 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
Tripod Mounting
To attach the camcorder
2 Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
● Some tripods are not
equipped with studs.
3 Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
Loading/Unloading A Cassette
The camcorder needs to be powered up to load
or eject a cassette.
Cassette holder
Cassette holder
PAUSE
cover
PUSH HERE
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Brightness Adjustment Of The
Display
Erase
protection tab
OPEN/EJECT
1 Set the Power Switch
Make sure the window side
is facing out.
+
to “M” or “PLAY” while
–
pressing down the Lock
1 Slide and hold OPEN/EJECT in the direction
of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.
Button located on the
switch.
2 Open the LCD monitor
fully. (੬ pg. 18)
MENU
● Do not touch internal components.
● To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
2 Insert or remove a tape and press “PUSH
HERE” to close the cassette holder.
● Be sure to press only the section labelled “PUSH
HERE” to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.
“PRIORITY” to “FINDER”
(੬ pg. 31, 34).
BRIGHT
3 Press MENU. The
Menu Screen appears.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4 Press + or – to select “n”, and press MENU.
The CAMERA DISPLAY Menu appears.
5 Press + or – to select “BRIGHT”, and press
MENU. The Menu Screen closes and the
brightness control indicator appears.
6 Press + or – until the appropriate brightness
is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
17
● When the battery pack’s charge is low, you may
not be able to close the cassette holder cover. Do
not apply force. Replace the battery pack with a
fully charged one or use AC power before
continuing.
Loading/Unloading A Memory
Card
Card Cover (MEMORY CARD)
Label
3 Close the cassette holder cover firmly until it
locks into place.
To protect valuable recordings
Slide the erase protection tab on the back of the
tape in the direction of “SAVE”. This prevents the
tape from being recorded over. To record on this
tape, slide the tab back to “REC” before loading
it.
Memory card
(optional)
Write/erase protection tab
Clipped edge
NOTES:
● If you wait a few seconds and the cassette holder
does not open, close the cassette holder cover
and try again. If the cassette holder still does not
open, turn the camcorder off then on again.
● If the tape does not load properly, open the
cassette holder cover fully and remove the
cassette. A few minutes later, insert it again.
● When the camcorder is suddenly moved from a
cold place to a warm environment, wait a short
time before opening the cassette holder cover.
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD).
3 To load a memory card, firmly insert it with
its clipped edge first.
To unload a memory card, push it once. After
the memory card comes out of the camcorder,
pull it out.
● Do not touch the terminal on the reverse side of
the label.
4 Close the card cover.
To protect valuable files (available only for
SD Memory Card)
Slide the write/erase protection tab on the side
of the memory card in the direction of “LOCK”.
This prevents the memory card from being
recorded over. To record on this memory card,
slide the tab back to the position opposite to
“LOCK” before loading it.
NOTES:
● Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card, consult its manufacturer or dealer.
● Before using a new memory card, it is necessary
to format the card. (੬ pg. 30)
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognise whether
or not the card is installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO RECORDING
EN
18
Basic Recording
● When a blank portion is left between recorded
scenes on the tape, the time code is interrupted
and errors may occur when editing the tape. To
avoid this, refer to “Recording From The Middle Of
NOTE:
Before continuing, perform the procedures listed
below:
● To turn the beep sounds off, ੬ pg. 31, 33.
● Power (੬ pg. 13)
● Loading A Cassette (੬ pg. 16)
Tape Remaining Time
Approximate tape remaining
time appears on the display.
“– h – – m” means the
VIDEO/MEMORY
camcorder is calculating the
remaining time. When the
remaining time reaches 2 minutes, the indication
starts blinking.
● The time required to calculate and display the
remaining tape length, and the accuracy of the
calculation, may vary according to the type of tape
used.
Power Zoom Lever
Power Switch
Lock Button
POWER/CHARGE Lamp
LCD Monitor And Viewfinder
While using the LCD monitor:
Recording Start/Stop Button
Make sure the viewfinder is pushed back in. Pull
1 Remove the lens cap. (੬ pg. 11)
2 Open the LCD monitor fully.
on the end
of the LCD monitor and open the
LCD monitor fully. It can rotate 270° (90°
downward, 180° upward).
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
While using the viewfinder:
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
● The POWER/CHARGE lamp lights and the
camcorder enters the Record-Standby mode.
“PAUSE” is displayed.
180˚
● To record in LP (Long Play) mode, ੬ pg. 32.
5 To start recording, press the Recording Start/
Stop Button. “T REC” appears on the display
while recording is in progress.
90˚
6 To stop recording, press the Recording Start/
Stop Button again. The camcorder re-enters the
Record-Standby mode.
NOTES:
● The image will not appear simultaneously on the
LCD monitor and the viewfinder. When the
viewfinder is pulled out while the LCD monitor is
opened, you can select which one to use. Set
“PRIORITY” to the desired mode in SYSTEM
Menu. (੬ pg. 31, 34)
● Coloured bright spots may appear all over the
LCD monitor or the viewfinder. However, this is not
a malfunction. (੬ pg. 48)
Approximate recording time
Recording mode
Tape
SP
LP
45 min.
30 min.
60 min.
80 min.
30 min.
60 min.
80 min.
90 min.
120 min.
NOTES:
● If the Record-Standby mode continues for
5 minutes, the camcorder’s power shuts off
automatically. To turn the camcorder on again,
push back and pull out the viewfinder again or
close and re-open the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO RECORDING
EN
19
Zooming
Journalistic Shooting
Produces the zoom in/out effect, or an
instantaneous change in image magnification.
In some situations,
different shooting
angles may provide
more dramatic results.
Hold the camcorder in
the desired position
and tilt the LCD
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
monitor in the most
convenient direction. It
can rotate 270° (90°
downward, 180°
The further you slide the Power Zoom Lever, the
quicker the zoom action.
Zoom in (T: Telephoto)
upward).
1
x
W
T
10
x
W
T
20
xW
T
40
xW
T
During recording, a time code is recorded on the
tape. This code is to confirm the location of the
recorded scene on the tape during playback.
Display
Zoom out (W: Wide angle)
10
x
W
T
Minutes
Digital zoom zone
Seconds
25X (optical) zoom zone
Frames*
(25 frames = 1 second)
12 : 34 : 24
Approximate zoom ratio
NOTES:
* Frames are not displayed during recording.
● Focusing may become unstable during Zooming.
In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus
(੬ pg. 38), then zoom in or out in Record mode.
● Zooming is possible to a maximum of 800X, or it
can be switched to 25X magnification using the
optical zoom. (੬ pg. 32)
● Zoom magnification of over 25X is done through
Digital image processing, and is therefore called
Digital Zoom.
● During Digital zoom, the quality of image may
suffer.
● Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to “MEMORY”.
If recording starts from a blank portion, the time
code begins counting from “00:00:00”
the end of a previously recorded scene, the time
code continues from the last time code number.
If during recording a blank portion is left partway
through the tape, the time code is interrupted.
When recording is resumed, the time code starts
counting up again from “00:00:00”. This means
the camcorder may record the same time codes
as those existing in a previously recorded scene.
To prevent this, perform Recording From The
Middle Of A Tape (੬ pg. 20) in the following
cases;
● When shooting again after playing back a
recorded tape.
● When power shuts off during shooting.
● When a tape is removed and re-inserted during
shooting.
● When shooting using a partially recorded tape.
● When shooting on a blank portion located partway
through the tape.
●
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. Also see “TELE MACRO” in
MANUAL Menu on page 33.
● When shooting a subject close to the lens, zoom
out first. If zoomed-in in the auto focus mode, the
camcorder may automatically zoom out
depending on the distance between the
camcorder and the subject. This will not occur
when “TELE MACRO” is set to “ON”. (੬ pg. 33)
● When shooting again after shooting a scene then
opening/closing the cassette holder cover.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
20
EN
NOTES:
Normal Playback
5
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when “TIME
CODE” is set to “ON”. (੬ pg. 34)
VOL. +/–
Lock Button
3
4/9
8
Speaker
M
A
Quick Review
Enables to check the end of the last recording.
Power
Switch
1) Press
during the Recording-Standby
mode.
2) Tape is rewound for about several seconds
and played back automatically, then pauses in
the Recording-Standby mode for the next shot.
● Distortion may occur at start of playback. This is
normal.
MENU
VIDEO/MEMORY
1 Load a cassette. (੬ pg. 16)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
(੬ pg. 21) to find the spot at which you want to
start recording, then engage the Still Playback
mode. (See the right column.)
2) Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch, then start recording.
4 To start playback, press 4/9.
5 To stop playback, press 8.
● During Stop mode, press 3 to rewind, or 5
to fast-forward the tape.
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards
“+” to turn up the volume, or towards “–” to turn
down the volume.
NOTES:
● The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(੬ pg. 22)
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
● When a cable is connected to the S/AV connector,
the sound is not heard from the speaker.
Still Playback
Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9
again.
● If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
21
Shuttle Search
Allows high-speed search in either direction
during video playback.
1) During playback, press 5 for forward
search, or 3 for reverse search.
2) To resume normal playback, press 4/9.
● During playback, press and hold 5 or 3. The
search continues as long as you hold the button.
Once you release the button, normal playback
resumes.
NOTES:
● Before starting Blank Search, if the current
position is at a blank portion, the camcorder
searches in the reverse direction. If the current
position is at a recorded portion, the camcorder
searches in the forward direction.
during Blank Search, the camcorder stops
● A blank portion which is shorter than 5 seconds of
tape may not be detected.
● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
● A slight mosaic effect appears on the display
during Shuttle Search. This is not a malfunction.
ATTENTION:
During Shuttle Search, parts
of the picture may not be
clearly visible, particularly on
the left side of the screen.
Blank Search
Helps you find where you should start recording
in the middle of a tape to avoid time code
interruption. (੬ pg. 19)
1 Load a cassette. (੬ pg. 16)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
4 Press MENU. The Menu Screen appears.
5 Press MENU to select “t”. The VIDEO
Menu appears.
6 Press + or – to select “BLANK SRCH”, and
press MENU. The Sub Menu appears.
7 Press + or – to select “EXECUTE”, and press
MENU.
● The “BLANK SEARCH” indication appears and
the camcorder automatically starts reverse or
forward search, then stops at the spot which is
about 3 seconds of tape before the beginning of
the detected blank portion.
● To cancel Blank Search midway, press 8.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
22
1 Make sure all units are turned off.
Connections To A TV Or VCR
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
To AV
referring to your VCR’s instruction manual.
connector
4 Turn on the camcorder, the VCR and the TV.
Open the cover.
S/AV cable
(provided)
5 Set the VCR to its AUX input mode, and set
mark
the TV to its VIDEO mode.
6 Start playback on the camcorder. (੬ pg. 20)
To choose whether or not the following
displays appear on the connected TV
● Date/Time
1
2
3
4
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(੬ pg. 31, 36)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
● Time Code
Set “TIME CODE” to “ON” or “OFF”.
(੬ pg. 31, 36)
● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(੬ pg. 31, 36)
“Y/C”/“CVBS”
Video Out Select
Switch
Cable
Adapter*
To TV or VCR
TV
VCR
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 14)
A Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
B Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
C Red to AUDIO R IN**
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
D White to AUDIO L IN**
*
If your VCR has a SCART connector, use the
provided cable adapter.
** Not required for watching still images only.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
23
The following buttons are available only when
Playback Using The Remote
Control
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(੬ pg. 24)
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
● Pauses the tape (੬ pg. 24)
Up Button (੬ pg. 24)
C SLOW Rewind Button (੬ pg. 24)
D REW Button
● Rewind/Reverse Shuttle Search on a tape
(੬ pg. 21)
● Displays previous file in a memory card
(੬ pg. 26)
Left Button (੬ pg. 24)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
E INSERT Button (੬ pg. 46)
F SHIFT Button (੬ pg. 24)
G DISPLAY Button (੬ pg. 22, 43)
H SLOW Forward Button (੬ pg. 24)
I PLAY Button
● Starts Playback of a tape (੬ pg. 20)
● Starts Auto Playback of images in a memory
card (੬ pg. 27)
2
1
1 Pull out the battery
3
holder by pushing the lock
tab.
1
Lock tab
2 Insert the battery in the
J FF Button
● Forward/Forward Shuttle Search on a tape
(੬ pg. 21)
holder, and be sure to
have the “+” mark visible.
● Displays next file in a memory card (੬ pg. 26)
Right Button (੬ pg. 24)
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
K A. DUB Button (੬ pg. 46)
L STOP Button
● Stops the tape (੬ pg. 20)
● Stops Auto Playback (੬ pg. 27)
Down Button (੬ pg. 24)
M EFFECT Button (੬ pg. 24)
N EFFECT ON/OFF Button (੬ pg. 24)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
The following buttons are available when the
camcorder’s Power Switch is set to “A” or “M”.
o Zoom (T/W) Buttons
Zoom in/out (੬ pg. 19, 24)
(Also available with the Power Switch set to
“PLAY”)
5 m.
Remote sensor
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
p START/STOP Button
Buttons And Functions
Functions the same as the Recording Start/
Stop Button on the camcorder.
q S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
A Infrared beam transmitting window
● Transmits the beam signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
24
.
2) At the point you want to zoom
in, press the Zoom Button (T).
● To zoom out, press the Zoom
Button (W).
PAUSE or
(Up)
Zoom (T/W)
SLOW (YI)
SLOW (IU)
3) You can move the image on
the screen around to find a
particular portion of the picture.
While holding down SHIFT,
PLAY
(Right)
STOP or
(Down)
(Left)
press
(Left), (Right),
(Down).
SHIFT
(Up) and
● To end zoom, press and hold W until magnification
returns to normal. Or, press STOP (8) and then
press PLAY (U) during video playback.
Slow-Motion Playback
During normal video playback, press SLOW (YI
or IU) more than approx. 2 seconds.
● After approx. 10 minutes, normal playback
resumes.
● To pause Slow-Motion playback, press PAUSE
(9).
NOTES:
● Zoom can also be used during slow-motion and still
playback.
● Due to digital image processing, the quality of the
image may suffer.
● To stop Slow-Motion playback, press PLAY (U).
Playback Special Effects
Allows you to add creative effects to the video
playback image.
NOTES:
● You can also engage Slow-Motion Playback from
Still Playback by pressing SLOW (YI or IU) more
than approx. 2 seconds.
CLASSIC FILM: Gives recorded scenes a
strobe effect.
● During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic
effect.
● After SLOW (YI or IU) is pressed and held, the
still image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This
is not a malfunction.
● During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is
not a malfunction.
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
SEPIA: Recorded scenes have a brownish
tint like old photos. Combine this with the
Cinema mode for a classic look.
STROBE: Your recording looks like a
series of consecutive snapshots.
1) To start
Frame-By-Frame Playback
EFFECT ON/OFF
playback,
press PLAY
EFFECT
During normal or still playback, press SLOW
(IU) repeatedly for forward or SLOW (YI)
repeatedly for reverse. Each time SLOW (YI or
IU) is pressed, the frame is played back.
(U).
2) Press
EFFECT. The
PLAYBACK EFFECT Select Menu appears.
3) Press EFFECT repeatedly to move the
highlight bar to the desired effect.
● The selected function is activated and after
2 seconds the menu disappears.
● To deactivate the selected effect, press EFFECT
ON/OFF. To reactivate the selected effect press
EFFECT ON/OFF again.
Playback Zoom
Magnifies the recorded image up to 32X at any
time during video playback and D.S.C. playback.
1) Press PLAY (U) to start video
playback. Or perform normal
playback of images.
● To change the selected effect, repeat from step 2
above.
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. RECORDING
EN
25
Approximate Number of Storable Images
● The number increases or decreases depending
Basic Shooting (D.S.C. Snapshot)
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
SD Memory Card
Image Size/Picture
Quality
8 MB 16 MB 32 MB 64 MB
640 x 480/FINE
47
160 295 625 1285
21 47 95 200
95 205 425
NOTE:
Before continuing, perform the procedures listed
below:
640 x 480/STANDARD
1024 x 768/FINE
● Power (੬ pg. 13)
● Loading a Memory Card (੬ pg. 17)
1024 x 768/STANDARD
65 145 310 640
SNAPSHOT
MultiMediaCard
Image Size/Picture
Quality
Power Switch
8 MB 16 MB 32 MB
640 x 480/FINE
190
25
105
320
50
215
645
100
320
1024 x 768/FINE
VIDEO/
MEMORY
1024 x 768/STANDARD
75
160
1 Remove the lens cap.
2 Open the LCD monitor fully. (੬ pg. 18)
Interval Shooting
During Interval Shooting mode, the camcorder
continues to take snapshots automatically with
an interval of your desired setting.
3 Set the VIDEO/MEMORY Switch to
“MEMORY”.
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
1 Set “INT.SHOT” to “ON”. (੬ pg. 31, 35)
● “INTERVAL” and “ ” appear.
● To change the Image Size and/or Picture Quality,
5੬Ppregs.s31S,N3A4.PSHOT. The “O” indication
appears while the snapshot is being taken.
● Still images are recorded in the snapshot mode
with no frame.
● To delete unwanted still images, refer to “Deleting
Files” (੬ pg. 29).
● When you do not want to hear the shutter sound,
set “BEEP” to “OFF”. (੬ pg. 31, 33)
2 Set “INT.TIME” to the desired shooting
interval. (੬ pg. 31, 35)
3 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
4 Press SNAPSHOT.
● First shot is taken after 2 seconds.
● The “O” indicator appears while the snapshot
is being taken.
NOTE:
● The clock icon “ ” turns while waiting for the next
shot is being taken.
● The next shot is being taken automatically when
the shooting interval set in step 2 has passed.
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power. To
perform shooting again, push back and pull out the
viewfinder again or close and re-open the LCD
monitor.
5 Press SNAPSHOT to stop Interval Shooting.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. PLAYBACK
26
EN
To cancel Interval Shooting mode
Normal Playback Of Images
Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
Set “INT.SHOT” to “OFF” in step 1.
NOTES:
● To distinguish between still images taken in
Interval Shooting mode and other still images, it is
recommended that you reset the file names before
shooting. (੬ pg. 28)
● Interval Shooting will stop if the battery runs out of
power or the Memory Card becomes full.
● The function “Animation” in the provided software
“Digital Photo Navigator” can be used to create
movie files from the captured still images
Lock Button
–
+
4/9
M
A
8
®
(Windows only). To create movie files with the
Power Switch
Macintosh, it is recommended that you use the
function “Creating a Slideshow From Still Images”
in the commercial software “QuickTime Pro”.
VIDEO/MEMORY
MENU
1 Load a memory card. (੬ pg. 17)
2 Set the VIDEO/MEMORY Switch to
“MEMORY”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
● A stored image is displayed.
4 Press – to display the previous file. Press + to
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than “640 x 480” and
“1024 x 768” will be displayed as thumbnails only.
These thumbnail images cannot be transferred to a
PC.
Playback Zoom
Available only with the remote control.
(੬ pg. 24)
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. PLAYBACK
EN
27
Auto Playback Of Images
memory card automatically.
Images” (੬ pg. 26).
2 Press MENU. The Menu Screen appears.
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
3 Press + or – to select “DISPLAY”, and press
MENU. The Sub Menu appears.
2 Press 4/9 to start Auto Playback.
● If you press – during Auto Playback, files are
displayed in descending order.
● If you press + during Auto Playback, files are
displayed in ascending order.
4 Press + or – to select “OFF”, and press
MENU. The operation mode indicator, folder/file
number and battery remaining power indicator
disappear.
● To display the indicators again, select “ON”.
Operation mode indicator
3 To end Auto Playback, press 8.
Folder/file number
Index Playback Of Files
You can view several different files stored in the
memory card at a time. This browsing capability
makes it easy to locate a particular file you want.
100-0013
MENU
50m
D I SPLAY OFF
ON
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
Battery remaining power indicator
2 Press INDEX. The
Selected file
Index Screen appears.
1
4
7
2
5
8
3
3 Press + or – to move
the frame to the desired
file.
● Press – to display the
previous page. Press +
to display the next page.
6
9
Index number
4 Press MENU. The
selected file is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
28
Dubbing Still Images Recorded On
A Tape To A Memory Card
Protecting Files
The Protect mode helps prevent the accidental
erasure of files.
Still images can be dubbed from a tape to a
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
memory card.
1 Load a cassette. (੬ pg. 16)
2 Press MENU. The Menu Screen appears.
2 Load a memory card. (੬ pg. 17)
3 Set “SNAP/SLOW” to the desired mode.
MENU. The Sub Menu appears.
(except “SLOW”, ੬ pg. 31, 32)
To protect the currently displayed file
4 Set the VIDEO/MEMORY Switch to “VIDEO”.
4 Press + or – to select
5 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
“CURRENT”, and press
MENU
PROTECT
CURRENT
PROT . ALL
CANC . ALL
MENU. The PROTECT
screen appears.
RETURN
6 Set “
COPY” to “ON”.
5 Slide the Power Zoom
Lever towards “T” or “W”
to select the desired file.
(੬ pg. 31, 35)
7 Press 4/9 to start playback.
8 At the point you want to dub, press 4/9
“EXECUTE”, and press
MENU.
PROTECT
again to engage Still Playback.
9 To dub the image, press SNAPSHOT.
● To cancel protection,
select “RETURN”.
● Repeat steps 5 and 6 for
all files you want to
protect.
PROTECTED
RETURN
● The “
” indication appears during dubbing.
W
T
NOTES:
● To use Playback Special effects with a video
image you wish to dub, perform up to step 9 using
the remote control. (੬ pg. 24)
To protect all files stored in the memory card
● Images are dubbed in 640 x 480 pixels.
4 Press + or – to select “PROT.ALL”, and press
MENU. The PROTECT screen appears.
Resetting The File Name
5 Press + or – to select “EXECUTE”, and press
MENU.
● To cancel protection, select “RETURN”.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
NOTES:
● If the “
” mark appears, the currently displayed
file is protected.
● When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
2 Press MENU. The Menu Screen appears.
3 Press + or – to select “NO. RESET”, and
press MENU. The NO. RESET screen appears.
4 Press + or – to select “EXECUTE”, and press
MENU. The new folder (such as “101JVCGR”)
will be made and the file name of the next shot
starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
29
To Remove Protection
Before doing the following, perform steps 1 – 3
in “Protecting Files”.
4 Press + or – to select “ALL”, and press
MENU. The DELETE screen appears.
5 Press + or – to select “EXECUTE”, and press
MENU.
● To cancel deletion, select “RETURN”.
To remove protection from the currently
displayed file
4 Press + or – to select “CURRENT”, and press
NOTES:
MENU. The PROTECT screen appears.
● Protected files (੬ pg. 28) cannot be deleted. To
delete them, remove protection first.
● Once files are deleted, they cannot be restored.
5 Slide the Power Zoom Lever towards “T” or
“W” to select the desired file.
6 Press + or – to select “EXECUTE”, and press
MENU.
CAUTION:
● To cancel selection, select “RETURN”.
● Repeat steps 5 and 6 for all files you want to
remove protection.
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Adapter, as the memory card may be corrupted
if the battery becomes exhausted during deletion. If
the memory card becomes corrupted, initialise it.
(੬ pg. 30)
To remove protection from all files stored in
the memory card
4 Press + or – to select “CANC.ALL”, and press
MENU. The PROTECT screen appears.
5 Press + or – to select “EXECUTE”, and press
MENU.
● To cancel selection, select “RETURN”.
Setting Print Information (DPOF
Setting)
This camcorder is compatible with the DPOF
(Digital Print Order Format) standard in order to
support future systems such as automatic
printing. You can select one of the 2 print
information settings for images stored in the
memory card: “To Print All Still Images (One
Images And Number Of Prints”.
Deleting Files
Previously stored files can be deleted either one
at a time or all at once.
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
2 Press MENU. The Menu Screen appears.
NOTES:
3 Press + or – to select “DELETE”, and press
● If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
MENU. The Sub Menu appears.
To delete the currently displayed file
4 Press + or – to select
● To print images recorded on a tape, first dub them
to a memory card. (੬ pg. 28)
“CURRENT”, and press
MENU
MENU. The DELETE
screen appears.
DELETE
CURRENT
ALL
To Print All Still Images (One Print For Each)
RETURN
5 Slide the Power Zoom
Lever towards “T” or “W” to
select the desired file.
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 26).
6 Press + or – to select
“EXECUTE”, and press
MENU.
● To cancel deletion, select
“RETURN”.
2 Press MENU. The Menu Screen appears.
3 Press + or – to select
DELETE
“DPOF”, and press MENU.
MENU
DELETE?
The Sub Menu appears.
DPOF
CURRENT
ALL
RESET
EXECUTE
RETURN
1
● Repeat steps 5 and 6 for
all files you want to delete.
4 Press + or – to select
“ALL 1”, and press MENU.
The DPOF screen
appears.
RETURN
NOTE:
If the “
” mark appears, the selected file is
protected and cannot be deleted.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
30
5 Press + or – to select
“EXECUTE”, and press
MENU. The normal
To Reset The Number Of Prints
DPOF
1 Perform steps 1 – 3 in “To Print All Still
playback screen appears.
● To cancel selection, select
“RETURN”.
ALL1?
Images (One Print For Each)”.
EXECUTE
RETURN
2 Press + or – to select “RESET”, and press
MENU. The DPOF screen appears.
3 Press + or – to select “EXECUTE”, and press
MENU. The normal playback screen appears.
● The number of prints is reset to 0 for all still
images.
To Print By Selecting Still Images And
Number Of Prints
1 Perform steps 1 – 3 in “To Print All Still
Images (One Print For Each)”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
2 Press + or – to select
DPOF
“CURRENT”, and press
MENU. The DPOF screen
appears.
SHEETS
0 0
Initialising A Memory Card
You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
3 Slide the Power Zoom
RETURN
Lever towards “T” or “W” to
select the desired file.
(00), and press MENU.
5 Select the number of
DPOF
1 Set the VIDEO/MEMORY Switch to
prints by pressing + to
“MEMORY”.
increase the number, or –
to decrease the number,
2 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
SHEETS
and press MENU.
0 5
● Repeat steps 3 through 5
for the desired number of
3 Press MENU. The Menu Screen appears.
prints.
FORMAT
4 Press + or – to select
● The number of prints can be set up to 15.
● To correct the number of prints, select the image
again and change the number.
“FORMAT”, and press
ERASE ALL
EX I ST I NG DATA?
MENU. The FORMAT
screen appears.
6 Press + or – to select
DPOF
EXECUTE
RETURN
“RETURN”, and press
5 Press + or – to select
MENU. The “SAVE?”
“EXECUTE”, and press
appears.
MENU. The memory card
is initialised.
● When initialisation is finished, “NO IMAGES
STORED” appears.
SAVE?
● If you did not change any
EXECUTE
CANCEL
settings in step 3 through
5, the Menu Screen
reappears.
● To cancel initialisation, select “RETURN”.
7 Press + or – to select “EXECUTE” to save the
setting you have just made, and press MENU.
● To cancel selection, select “CANCEL”.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted, initialise it.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
31
Menus without Sub Menus
Changing The Menu Settings
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of
the more detailed camcorder settings.
(੬ pg. 32 – 36)
v WIPE/FADER
(੬ pg. 41)
Selected menu icon
blinks.
r PROGRAM AE
(੬ pg. 42)
p EXPOSURE
(੬ pg. 39)
u W. BALANCE
(੬ pg. 40)
Selected
PROGRAM AE
–
Lock Button
SPORTS
+
SPOTLIGHT
TWILIGHT
SEPIA
MONOTONE
CLASSIC FILM
the desired parameter.
● Example: r PROGRAM
AE Menu
STROBE
Power Switch
VIDEO/MEMORY
2) Press MENU. Selection is complete. The
Menu Screen returns.
● Repeat the procedure if you wish to set other
function menus.
MENU
3) Press MENU. The Menu Screen closes.
1 For Video and D.S.C. Recording Menus:
● Set the VIDEO/MEMORY Switch to “VIDEO” or
“MEMORY”.
● Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
Menus with Sub Menus
m CAMERA (੬ pg. 32)
q MANUAL
Selected menu icon
blinks.
(੬ pg. 32)
s SYSTEM (੬ pg. 33)
For Video Playback Menus:
Selected function
● Set the VIDEO/MEMORY Switch to “VIDEO”.
● Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
● For D.S.C. Playback Menus, refer to “D.S.C.
PLAYBACK” (੬ pg. 26).
n
੬
CAMERA DISPLAY
pg. 34)
CAMERA
REC MODE
–
(
SOUND MODE– 1 2B I T
ZOOM
–
–
–
2 5 x
o DSC (੬ pg. 34)
t VIDEO (੬ pg. 35)
n VIDEO DISPLAY
(੬ pg. 36)
SNAP/SLOW
GA I N UP
FULL
AGC
2 Open the LCD monitor fully. (੬ pg. 18)
3 Press MENU. The Menu Screen appears.
RETURN
1) Press + or – to select
the desired function,
and press MENU. The
Sub Menu appears.
● Example: m CAMERA
Menu
Sub Menu
4 Press + or – to select the desired function,
and press MENU. The selected function menu
appears.
CAMERA
REC MODE
–
Screen for Video and Screen for Video
D.S.C. Recording Menu Playback Menu
2) Press + or – to select
the desired parameter.
3) Press MENU.
WI PE / FADER
OFF
V I DEO
SOUND MODE– STEREO
FADER–WH I TE
FADER–BLACK
FADER–B .W
WI PE–CORNER
WI PE–WI NDOW
WI PE–SL I DE
WI PE–DOOR
WI PE–SCROLL
WI PE–SHUTTER
NARRAT I ON
REC MODE
–
–
OFF
COPY– OFF
BLANK SRCH
Selection is complete.
● Repeat the procedure if
you wish to set other
function menus.
CAMERA
S / AV I NPUT
–
OFF
REC MODE
–
SOUND MODE– 1 2B I T
ZOOM
–
–
–
2 5 x
SNAP/SLOW
GA I N UP
FULL
AGC
RETURN
4) Press MENU. The
Menu Screen returns.
● Repeat the procedure if
5 Setting procedure hereafter depends on the
selected function.
RETURN
you wish to set other function menus.
5) Press MENU. The Menu Screen closes.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
32
Recording Menus
SNAP/SLOW
[FULL]: Snapshot mode with no frame
NEGA: Nega mode
PIN-UP: Pin-Up mode
CAMERA
The “m CAMERA” settings are effective when
the Power Switch is set to both “A” and “M”.
However, the menu settings can be changed
only when the Power Switch is set to “M”.
[ ] = Factory-preset
FRAME: Snapshot mode with frame
SLOW: Live Slow mode
REC MODE
[FULL]
NEGA
PIN-UP
FRAME
For details on the procedure, refer to “Live Slow”
(੬ pg. 37) and “Snapshot (For Video
Recording)” (੬ pg. 38).
[SP]: To record in the SP (Standard Play) mode
LP: Long Play—more economical, providing 1.5
times the recording time.
NOTES:
GAIN UP
● Audio Dubbing (੬ pg. 46) and Insert Editing
(੬ pg. 46) are possible on tapes recorded in the
SP mode.
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC]: The overall appearance may be grainy,
but the image is bright.
AUTO
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
● If the recording mode is switched, the playback
picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
: The shutter speed is automatically
SOUND MODE
“
” is displayed.
[12BIT]: Enables video recording of stereo
sound on four separate channels, and is
recommended for use when performing Audio
Dubbing. (Equivalent to the 32 kHz mode of
previous models)
16BIT: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
MANUAL
The “q MANUAL” settings are effective only
when the Power Switch is set to “M”.
[ ] = Factory-preset
DIS
OFF: Disables the function.
[ON
]: To compensate for unstable images
ZOOM
caused by camera-shake, particularly at high
magnification.
25X: When set to “25X” while using digital zoom,
the zoom magnification will reset to 25X since
digital zoom will be disengaged.
[100X]*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 25X (the optical zoom
limit), to a maximum of 100X digital
magnification.
800X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 25X (the optical zoom
limit), to a maximum of 800X digital
magnification.
NOTES:
● Accurate stabilisation may not be possible if hand
shake is excessive, or depending on the shooting
condition.
” indicator blinks or goes out if the
Stabiliser cannot be used.
● Switch off this mode when recording with the
camcorder on a tripod.
● The “
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
SYSTEM
5S
[OFF]: Disables 5-Second Recording.
5S: Enables 5-Second Recording. (੬ pg. 37)
Anim.: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
The “s SYSTEM” functions which are set when
the Power Switch is set to “M” are also applied
when the Power Switch is set to “PLAY”.
[ ] = Factory-preset
BEEP
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (੬ pg. 25, 38)
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
TELE MACRO
[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 40 cm.
NOTE:
Depending on the zoom position, the lens may go out
of focus.
(੬ pg. 25, 38)
REMOTE
WIDE MODE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
[OFF]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
DEMO MODE
CINEMA* : Inserts black bands at the top and
OFF: Automatic demonstration will not take
place.
bottom of the screen. The
indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording
on 4:3 TVs/LCD monitor/viewfinder, black bands
are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9
movie.
SQUEEZE* : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
indicator appears. When using this mode,
refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, the image is elongated
vertically.
[ON]: Demonstrates certain functions such as
Program AE with special effects, etc., and can
be used to confirm how these functions operate.
Demonstration starts in the following cases:
● When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
● With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M”.
● Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
● If a cassette is in the camcorder, the
demonstration cannot be turned on.
● “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
WIND CUT
[OFF]: Disengages the function.
ON
wind. The “
the sound will change. This is normal.
: Helps cut down on noise created by
” indicator appears. The quality of
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
34
PRIORITY
LANGUAGE
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS / РУССКИЙ
The language setting can be changed.
(੬ pg. 15)
AUX MIC
CAM RESET
OFF: Auxiliary microphone level indicator does
not appear.
[ON]: Displays auxiliary microphone level
indicator when optional microphone is
connected. (੬ pg. 8)
EXECUTE: Resets all settings to the factory-
preset.
[RETURN]: Does not reset all settings to the
factory-preset.
CLOCK ADJ.
CAMERA DISPLAY
੬ pg. 15, “Date/Time Settings”
● The “n” (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
“A”. However, the menu settings can be changed
only when the Power Switch is set to “M”.
● The “n” (CAMERA DISPLAY) settings except
“BRIGHT” and “AUX MIC” are effective only for
shooting.
DSC
[ ] = Factory-preset
QUALITY
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
[ ] = Factory-preset
BRIGHT
modes are available: FINE (
) and
੬ pg. 16, “Brightness Adjustment Of The
Display”
) (in order of quality).
NOTE:
ON SCREEN
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
IMAGE SIZE
640 x 480 / [1024 x 768]
The Image Size mode can be selected to best
match your needs. (੬ pg. 25)
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5
seconds when the Power Switch is set from
“OFF” to “A” or “M”.
NOTE:
The setting can be changed only when the VIDEO/
MEMORY Switch is set to “MEMORY”.
ON: The date/time is always displayed.
● The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. (੬ pg. 22, 43)
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (੬ pg. 19)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
35
REC SELECT
(TAPE)]: When Snapshot recording is
Playback Menus
[
performed with the VIDEO/MEMORY Switch set
to “VIDEO”, still images are recorded only onto
the tape.
VIDEO
[ ] = Factory-preset
/
(TAPE/CARD): When Snapshot
SOUND MODE and NARRATION
recording is performed with the VIDEO/
MEMORY Switch set to “VIDEO”, still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels). In this
mode, the “SNAP/SLOW” selection in CAMERA
Menu is also applicable to memory card
recording.
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 31, select “SOUND MODE” or
“NARRATION” from the Menu Screen and set it
to the desired parameter.
INT.SHOT
[OFF]: Disables the function.
ON: Enables interval shooting. (੬ pg. 25)
SOUND MODE
[STEREO
]: Sound is output on both “L” and
“R” channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
INT.TIME
15SEC
30MIN
/
/
30SEC
60MIN
/
[1MIN]
/
2MIN
/
5MIN
/
10MIN
/
Allows you to select the shooting interval for
interval shooting. (੬ pg. 25)
NARRATION
[OFF]: Original sound is output on both “L” and
“R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R”
channels in stereo. (੬ pg. 46)
MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
REC MODE
[SP] / LP
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (੬ pg. 43, 44)
COPY
[OFF]: When the SNAPSHOT button is pressed
during tape playback, the playback image
pauses and normal playback will resume after
approximately 6 seconds. (The still image is not
recorded.)
ON: Enables dubbing of images recorded on a
tape to a memory card. (੬ pg. 28)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
36
VIDEO DISPLAY
BLANK SRCH
੬ pg. 21, “Blank Search”
The “n” (VIDEO DISPLAY) settings are
effective only for video playback except
“BRIGHT” and “AUX MIC”.
SYSTEM
● The parameters (except “OFF” in ON SCREEN
settings) are the same as in the description
(CAMERA DISPLAY) on page 34.
Each setting is linked with “s SYSTEM”, which
appears when the Power Switch is set to “M”.
(੬ pg. 31)
● The parameters are the same as in the
description on page 33.
[ ] = Factory-preset
BRIGHT
੬ pg. 16, “Brightness Adjustment Of The
Display”
ON SCREEN
OFF / [LCD] / LCD/TV
When set to “OFF”, the camcorder’s display
disappears.
DATE/TIME
When set to “AUTO”, the date/time are displayed
in the following cases:
● When playback starts. The camcorder displays
the date/time when scenes are recorded.
● When the date is changed during playback.
TIME CODE
[OFF] / ON
੬ pg. 19, “Time Code”
LANGUAGE
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS / РУССКИЙ
The language setting can be changed.
(੬ pg. 15)
AUX MIC
OFF / [ON]
੬ pg. 34, “AUX MIC”
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
37
LED Light
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
5-Second Recording
Record a vacation or an important event in 5-
second clips to keep the action moving. This
function is available only for video recording.
1 Set “5S” to “5S”. (੬ pg. 33)
● The “5S” indicator appears.
1 Press LIGHT repeatedly to
change the setting.
LED Light
appears.)
2 Press the Recording Start/Stop Button to
start recording, and after 5 seconds the
camcorder enters Record-Standby mode
automatically.
● Even if you press the Recording Start/Stop Button
again within 5 seconds after recording starts,
Record-Standby mode is not engaged.
OFF: Turns off the light.
ON: The light is on always. (
AUTO: The light turns on automatically when
dark. ( appears.)
2 Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
3 To exit the 5S mode, select “OFF” in step 1.
To take a snapshot in the 5-second recording
mode
Instead of pressing the Recording Start/Stop
Button in step 2, select the desired Snapshot
mode in CAMERA Menu (੬ pg. 32), then press
SNAPSHOT. The camcorder records a 5-
second still. When “5S” is set to “Anim.”, this
function is not available.
NOTES:
● Be careful not to point the LED Light directly to
eyes.
● If the light does not reach the subject, the Night-
Scope function will be activated, and makes it
possible to shoot the subject brighter.
● There is a difference in the brightness of the
images shot between the centre area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
● Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
NOTE:
When “5S” is set to “Anim.”, the 5-Second
Recording mode is not available. Animation
recording of a few frames only is taken instead.
Live Slow
This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set “SNAP/SLOW” to “SLOW”.
(੬ pg. 31, 32) The Live Slow indicator “
”
appears.
3 Press SLOW during recording or playback.
● The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
38
Motor Drive Mode
Keeping SNAPSHOT pressed in step 4 provides
an effect similar to serial photography. (Interval
between still images: approx. 1 second)
SELECT” is set to “
Night-Scope
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
Although the recorded image is not grainy, it may
look as if it is strobing due to the slow shutter
speed.
/
”. (੬ pg. 35)
1 Set the Power Switch to “M”.
2 Press NIGHT so that the Night-Scope
The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as
close as approx. 5 cm to the subject) to infinity.
However, correct focus may not be obtained
depending on the shooting condition. In this
case, use the manual focus mode.
indicator “
” appears.
● The shutter speed is automatically adjusted to
provide up to 25 times sensitivity.
● “ ” appears beside “
” while the shutter speed
is being automatically adjusted.
To deactivate Night-Scope
Press NIGHT again so that the Night-Scope
indicator disappears.
1 Set the Power Switch to
“M”.
2 Press FOCUS. The
manual focus indicator
appears.
NOTES:
settings cannot be activated and its indicator
blinks or goes out:
3 Press + or – to focus on
• Some modes of “Program AE With Special
Effects” (੬ pg. 42).
• “GAIN UP” in CAMERA Menu (੬ pg. 32).
• “DIS” in MANUAL Menu (੬ pg. 32).
● During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
a subject.
Manual focus
indicator
● When the focus level
cannot be adjusted any
further or closer, “ ” or “ ” will blink.
4 Press MENU. Focus adjustment is complete.
To reset to Auto Focus
Press FOCUS twice or set the Power Switch to
“A”.
Snapshot (For Video Recording)
This feature lets you record still images that look
like photographs onto a tape.
Manual focus is recommended in situations
listed below.
● When two subjects overlap in the same scene.
● When illumination is low.*
● When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
colour wall, or a clear, blue sky.*
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set the Power Switch to “M”.
3 Set “SNAP/SLOW” to the desired mode.
● When a dark object is barely visible in the LCD
monitor or the viewfinder.*
(੬ pg. 31, 32) The Snapshot indicator “
”
appears.
● When the scene contains minute patterns or
identical patterns that are regularly repeated.
● When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
● When shooting a scene with a high-contrast
background.
4 Press SNAPSHOT.
● There is the sound effect of a shutter closing.
● The “O” indication appears and a still image
will be recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
● You can perform Snapshot also during recording.
A still image will be recorded for approx.
* The following low-contrast warnings appear
blinking:
,
,
and
.
6 seconds, then the normal recording resumes.
● Regardless of the Power Switch position (“A” or
“M”), Snapshot recording takes place using the
selected Snapshot mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
39
Exposure Control
Manual exposure control is recommended in the Like the pupil of the human eye, the iris
following situations:
● When shooting using reverse lighting or when the
background is too bright.
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When the background is overly dark or the subject
is bright.
Use this function in the following situations:
● When shooting a moving subject.
● When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When shooting objects under a spotlight.
● When zooming.
1 Set the Power Switch to “M”.
2 Set “p” to “MANUAL”. (੬ pg. 31)
● The exposure control indicator appears.
image, press –. (maximum 6)
● +3 exposure has the same effect as the backlight
compensation. (੬ pg. 40)
● –3 exposure has the same effect as when “r” is
set to “SPOTLIGHT”. (੬ pg. 42)
1 Set the Power Switch to “M”.
2 Set “p” to “MANUAL”. (੬ pg. 31)
● The exposure control indicator appears.
3 Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
MENU for over 2 seconds. The exposure control
indicator and the “ ” indication appear.
4 Press MENU. Exposure adjustment is
complete.
To return to automatic exposure control
Select “AUTO” in step 2. Or, set the Power
Switch to “A”.
4 Press MENU. The “ ” indication changes to
“
” and the iris is locked.
NOTES:
To return to automatic iris control
Select “AUTO” in step 2. Or, set the Power
Switch to “A”.
● You cannot use the manual exposure control at
the same time when “r” is set to “SPOTLIGHT”
or “SNOW” (੬ pg. 42), or with the backlight
compensation.
● The exposure control indicator and “
”
disappear.
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(੬ pg. 31, 32)
To lock the exposure control and the iris
After step 2, adjust the exposure by pressing +
or –. Then lock the iris in steps 3 and 4. For
automatic locking, select “AUTO” in step 2. The
exposure control and the iris become automatic.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
40
NOTES:
Backlight Compensation
Backlight compensation brightens the subject
● You cannot use the Spot Exposure Control at the
same time with following functions.
• “SQUEEZE” in “WIDE MODE” (੬ pg. 33)
• “STROBE” in “PROGRAM AE” (੬ pg. 42)
• Digital Zoom (੬ pg. 19)
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
• Manual Exposure Control
● Depending on the shooting location and condition,
optimum result may not be attained.
1 Set the Power Switch to “M”.
2 Press BACK LIGHT so that the Backlight
White Balance Adjustment
The white balance refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
Compensation indicator “ ” appears.
To cancel Backlight Compensation
Press BACK LIGHT twice so that the “
indicator disappears.
”
NOTE:
Using Backlight Compensation may cause the light
around the subject to become too bright and the
subject to become white.
Spot Exposure Control
To change the setting
Set “u” to the desired mode. (੬ pg. 31)
● The selected mode indicator except “AUTO”
appears.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.
[AUTO]: White balance is adjusted
automatically.
1 Set the Power Switch to “M”.
MWB: Adjust the white balance manually
when shooting under various types of lighting.
(੬ “Manual White Balance Adjustment”)
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of
lighting is used.
[ ] = Factory-preset
2 Press BACK LIGHT twice so that the Spot
Exposure Control indicator “ ” appears.
● A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
3 Press + or – to select the desired spot
metering area frame.
4 Press MENU.
● Spot Exposure Control is engaged.
● Exposure is adjusted to make the brightness of
the selected area most appropriate.
To return to automatic white balance
Set “u” to “AUTO”. (੬ pg. 31)
Or, set the Power Switch to “A”.
To lock the iris
After step 3, press and hold MENU over 2
seconds. The “ ” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the “
”
indicator disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
41
To deactivate the selected effect
Manual White Balance Adjustment
Adjust the white balance
manually when shooting
under various types of
lighting.
Select “OFF” in step 3. The effect indicator
disappears.
NOTES:
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
1 Set the Power Switch
● Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(੬ pg. 42) In this case, the selected indicator
blinks or goes out.
to “M”.
2 Select “MWB” in
“u W.BALANCE” menu. (੬ pg. 31)
● The
indication blinks slowly.
WIPE/FADER
3 Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
OFF: Disables the function. (Factory-preset)
FADER–WHITE: Fade in or out with a white
screen.
4 Press and hold MENU until
begins
blinking rapidly.
FADER–BLACK: Fade in or out with a black
screen.
● When the setting is completed,
normal blinking.
resumes
FADER–B.W: Fade in to a colour screen
from a black and white screen, or fade out from
colour to black and white.
5 Press MENU twice. The Menu Screen closes
and the Manual White Balance indicator
displayed.
is
WIPE–CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
NOTES:
● In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
(੬ pg. 38)
WIPE–WINDOW: The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.
● A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
WIPE–SLIDE: Wipe in from right to left, or
wipe out from left to right.
WIPE–DOOR: Wipe in as the two halves of
a black screen open to the left and right,
revealing the scene, or wipe out and the black
screen reappears from left and right to cover the
scene.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
Wipe Or Fader Effects
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
WIPE–SCROLL: The scene wipes in from
the bottom to the top of a black screen, or wipes
out from top to bottom, leaving a black screen.
WIPE–SHUTTER: Wipe in from the centre
of a black screen toward the top and bottom, or
wipe out from the top and bottom toward the
centre leaving a black screen.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set the Power Switch to “M”.
3 Set “v” to the desired mode. (੬ pg. 31)
● The WIPE/FADER menu disappears and the
effect is reserved.
● The selected effect indicator appears.
4 Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
42
SPORTS
Program AE With Special Effects
(Variable Shutter Speed: 1/250 – 1/4000):
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable
slow-motion playback. The faster the shutter
speed, the darker the picture becomes. Use the
shutter function under good lighting conditions.
1 Set the Power Switch to “M”.
● The PROGRAM AE menu disappears and the
selected effect is activated.
● The selected effect indicator appears.
SNOW: Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the
snow.
To deactivate the selected effect
Select “OFF” in step 2. The effect indicator
disappears.
SPOTLIGHT: Compensates for subjects
that may otherwise appear too bright when
shooting under extremely strong direct lighting
such as spotlights.
NOTES:
● Program AE with special effects cannot be
changed during recording.
● Some modes of Program AE with special effects
cannot be used during Night-Scope.
TWILIGHT: Makes evening scenes look
● When a subject is too bright or reflective, a vertical more natural. White Balance (੬ pg. 40) is
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when “SPORTS” or
any mode of “SHUTTER 1/250 – 1/4000” is
selected.
● Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(੬ pg. 41) In this case, the selected indicator
blinks or goes out.
automatically set to “ ”, but can be changed to
your desired setting. When Twilight is chosen,
the camcorder automatically adjusts the focus
from approx. 10 m to infinity. From less than 10
m, adjust the focus manually.
SEPIA: Recorded scenes have a brownish
tint like old photos. Combine this with the
Cinema mode for a classic look.
PROGRAM AE
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
CLASSIC FILM*: Gives recorded scenes a
strobe effect.
STROBE*: Your recording looks like a
series of consecutive snapshots.
MIRROR*: Creates a mirror image on the
right half of the screen, juxtaposed to the normal
image on the other half.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
OFF: Disables the function. (Factory-preset)
SHUTTER 1/50: The shutter speed is fixed
at 1/50th of a second. Black bands that usually
appear when shooting a TV screen become
narrower.
SHUTTER 1/120: The shutter speed is
fixed at 1/120th of a second. The flickering that
occurs when shooting under a fluorescent light
or mercury-vapour lamp is reduced.
SHUTTER 1/250/ SHUTTER 1/500/
SHUTTER 1/1000*/ SHUTTER 1/2000*/
SHUTTER 1/4000*: These settings allow fast-
moving images to be captured one frame at a
time, for vivid, stable slow-motion playback by
fixing shutter speed variables. Use these
settings when an automatic adjustment does not
work well, using SPORTS mode. The faster the
shutter speed, the darker the picture becomes.
Use the shutter function under good lighting
conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
43
NOTES:
Dubbing To A VCR
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 14)
● To choose whether or not the following displays
appear on the connected TV
To S/AV connector
• Date/time
Open the cover.
mark
S/AV cable
(provided)
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(੬ pg. 31, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(੬ pg. 31, 36)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (੬ pg. 31, 36)
1
2
3
4
Cable
Adapter*
“Y/C”/“CVBS”
Video Out Select
Switch
TV
To VCR
VCR
A To S-VIDEO IN**
B Yellow to VIDEO IN
C Red to AUDIO R IN
D White to AUDIO L IN
*
If your VCR has a SCART connector, use the
provided cable adapter.
** Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
1 Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. (੬ pg. 20)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
44
NOTES:
Dubbing To A Video Unit Equipped
With A DV Connector (Digital
Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little if any image or sound
deterioration.
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 14)
● If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4. If
this occurs, turn off the power and make
connections again.
● If “Playback Zoom” (੬ pg. 24) or “Playback
Special Effects” (੬ pg. 24) is attempted or
SNAPSHOT is pressed during playback, only the
original playback image recorded on the tape is
output from the DV OUT connector.
● When using a DV cable, be sure to use the
optional JVC VC-VDV204U DV cable.
To DV OUT
DV cable (optional)
Core filter
To DV IN
Video unit equipped with DV connector
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit
equipped with a DV input connector using a DV
cable as shown in the illustration.
3 Start playback on the camcorder. (੬ pg. 20)
4 At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unit’s instruction manual.)
5 To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
45
[A] Using USB cable
It is possible to do the following things:
● Transfer still images stored on a memory card
to a PC.
● Transfer still/moving images recorded on a
tape to a PC.
Connection To A Personal Computer
[A] Using USB cable [B] Using DV cable
OR
[B] Using DV cable
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
provided software, software equipped with the
PC or commercially available software.
®
If you are using a Windows XP, you can use
®
Windows Messenger to conduct video
conferences over the Internet, using a
To USB
To DV OUT
Core filter
camcorder. For details, refer to the help for the
®
Windows Messenger.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND PC
CONNECTION GUIDE” for the bundled software
and drivers.
USB cable
(provided)
DV cable
(optional)
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 14)
Core filter
● Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
To USB
To DV connector
connector
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
PC with DV connector
PC
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
● Connect the DV cable first to the PC, and then
to the camcorder.
● Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
“USB” and/or “
” appears on the
LCD monitor while the PC is accessing data in
the camcorder or the camcorder is
transferring a file to the PC.
NEVER disconnect the USB cable while
“
” is displayed on the LCD
monitor since this can result in product
damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
46
built-in microphone is disabled.
Audio Dubbing
The audio track can be customised only when
recorded in the 12-BIT and SP modes.
(੬ pg. 32)
Insert Editing
You can record a new scene into a previously
recorded tape, replacing a section of the original
recording with minimal picture distortion at the in
and outpoints. The original audio remains
unchanged.
● Use the provided remote control.
Microphone
Connector
Speaker
● Use the provided remote control.
NOTES:
● Before performing the following steps, make sure
that “TIME CODE” is set to “ON”. (੬ pg. 31, 36)
● Insert Editing is not possible on a tape recorded in
the LP mode or on a blank portion of a tape.
START/
STOP
PAUSE
PLAY
STOP
Stereo Microphone
REW
INSERT
A.DUB
1 Play back the tape, locate the Edit-Out point
and press PAUSE (9). Confirm the time code at
this point. (੬ pg. 19)
1 Play back the tape to locate the point where
editing will start, then press PAUSE (9).
2 Press REW (3) until the Edit-In point is
2 While holding A. DUB (D) on the remote
control, press PAUSE (9). The “9D” and “MIC”
indicators appear.
located, then press PAUSE (9).
3 Press and hold INSERT (I) on the remote
control, then press PAUSE (9). The “9I”
indicator and the Time Code (min.:sec.) appear
and the camcorder enters Insert-Pause mode.
3 Press PLAY (U), then begin “narrating”.
Speak into the microphone.
● To pause dubbing, press PAUSE (9).
4 Press START/STOP to begin editing.
● Confirm the insert at the time code you checked in
step 1.
4 To end Audio Dubbing, press PAUSE (9),
then STOP (8).
● To pause editing, press START/STOP. Press it
again to resume editing.
To hear the dubbed sound during playback
Set “NARRATION” to “ON” or “MIX”.
(੬ pg. 31, 35)
5 To end Insert Editing, press START/STOP,
then STOP (8).
NOTES:
● Sound is not heard from the speaker during Audio
Dubbing.
NOTES:
● Program AE with special effects (੬ pg. 42) can
be used to spice up the scenes being edited
during Insert Editing.
● When editing onto a tape that was recorded at
12-BIT, the old and new soundtracks are recorded
separately.
● If you dub onto a blank space on the tape, the
sound may be disrupted. Make sure you only edit
recorded areas.
● If feedback or howling occurs during TV playback,
move the camcorder’s microphone away from the
TV, or turn down the TV’s volume.
● If you change from 12-BIT to 16-BIT in mid-
recording and then use the tape for Audio
Dubbing, it is not effective from the point where
16-BIT recording began.
● During Insert Editing, the date and time
information changes.
● If you perform Insert Editing onto a blank space on
the tape, the audio and video may be disrupted.
Make sure you only edit recorded areas.
● During Insert Editing, when the tape moves to
scenes recorded in the LP mode or a blank
portion, Insert Editing stops. (੬ pg. 50)
● During Audio Dubbing, when the tape moves to
scenes recorded in the LP mode, scenes
recorded in 16-BIT audio or a blank portion, Audio
Dubbing stops.
● Audio dubbing is also possible using an optional
microphone connected to the MIC connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
47
If, after following the steps in the chart below, the
problem still exists, please consult your nearest
JVC dealer.
The LCD monitor or viewfinder indications
● Certain Wipe/Fader effects, certain modes of
Program AE with special effects, “DIS” and other
functions that cannot be used together are
selected at the same time.
HRe-read the sections covering Wipe/Fader
effects, Program AE with special effects and
“DIS”. (੬ pg. 31, 32, 41, 42)
The camcorder is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack,
AC Adapter, etc.) and wait a few minutes; and
then re-connect it and proceed as usual from
the beginning.
Digital Zoom does not work.
● 25X optical zoom is selected.
HSet “ZOOM” to “100X” or “800X”. (੬ pg. 32)
“MEMORY”.
Power
No power is supplied.
HSet the VIDEO/MEMORY Switch to “VIDEO”.
● The power is not connected properly.
HConnect the AC Adapter securely. (੬ pg. 14)
● The battery pack is not attached firmly.
HDetach the battery pack once again and re-attach
it firmly. (੬ pg. 13)
● The battery is dead.
HReplace the dead battery with a fully charged
Video and D.S.C. Playback
The tape is moving, but there is no picture.
● Your TV has AV input terminals, but is not set to
its VIDEO mode.
HSet the TV to the mode or channel appropriate for
one. (੬ pg. 13)
video playback. (੬ pg. 22)
● The cassette holder cover is open.
HClose the cassette holder cover. (੬ pg. 16)
Video and D.S.C. Recording
Recording cannot be performed.
Blocks of noise appear during playback, or
there is no playback picture and the screen
becomes blue.
● The tape’s erase protection tab is set to “SAVE”.
HSet the tape’s erase protection tab to “REC”.
(੬ pg. 16)
HClean the video heads with an optional cleaning
cassette. (੬ pg. 53)
● “TAPE END” appears.
HReplace with new cassette. (੬ pg. 16)
● The cassette holder cover is open.
HClose the cassette holder cover.
Advanced features
The focus does not adjust automatically.
When shooting a subject illuminated by
bright light, vertical lines appear.
● Focus is set to the Manual mode.
HSet Focus to the Auto mode. (੬ pg. 38)
● The lens is dirty or covered with condensation.
HClean the lens and check the focus again.
(੬ pg. 51)
● This is not a malfunction.
When the screen is under direct sunlight
during shooting, the screen becomes red or
black for an instant.
In the 5-Second mode, recording ends
before 5 seconds have elapsed.
● This is not a malfunction.
● The 5-Second mode is set to “Anim.” in MANUAL
Menu.
HSet “5S” to “5S” in MANUAL Menu.
(੬ pg. 31, 37)
During recording, the date/ time does not
appear.
● “DATE/TIME” is set to “OFF”.
HSet “DATE/TIME” to “ON”. (੬ pg. 31, 34)
Snapshot mode cannot be used.
● The Squeeze mode (SQUEEZE) is selected.
HDisengage the Squeeze (SQUEEZE) mode.
(੬ pg. 31, 33)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
48
The colour of Snapshot looks strange.
“SET DATE/TIME!” appears.
● The light source or the subject does not include
white. Or there are various different light sources
behind the subject.
HFind a white subject and compose your shot so
that it also appears in the frame. (੬ pg. 25, 38)
● The date/time is not set.
HSet the date/time. (੬ pg. 15)
previously set date/time has been erased.
HConsult your nearest JVC dealer for replacement.
The image taken using Snapshot is too
dark.
Files stored in the memory card cannot be
deleted.
HPress BACK LIGHT. (੬ pg. 40)
HRemove protection from the files stored in the
memory card and delete them. (੬ pg. 28)
The image taken using Snapshot is too
bright.
When the image is printed from the printer,
a black bar appears at the bottom of the
screen.
● The subject is too bright.
HSet “r” to “SPOTLIGHT”. (੬ pg. 42)
● This is not a malfunction.
White Balance cannot be activated.
this can be avoided.
● The Sepia (SEPIA) or Monotone (MONOTONE)
mode is activated.
HDisengage the Sepia (SEPIA) or Monotone
(MONOTONE) mode before setting White
Balance. (੬ pg. 42)
When the camcorder is connected via the
DV connector, the camcorder does not
operate.
● The DV cable was plugged/unplugged with power
turned on.
The Black & White Fader does not work.
HTurn the camcorder’s power off and on again,
then operate it.
● The Sepia (SEPIA) or Monotone (MONOTONE)
mode is activated.
(MONOTONE). (੬ pg. 42)
Images on the LCD monitor appear dark or
whitish.
The image looks like the shutter speed is
too slow.
become dark due to the characteristics of the
LCD monitor. This is not a malfunction.
HAdjust the brightness and angle of the LCD
monitor. (੬ pg. 16, 18)
● When shooting in the dark, the unit becomes
highly sensitive to light when “GAIN UP” is set to
“AUTO”.
● When the LCD monitor’s fluorescent light reaches
the end of its service life, images on the LCD
monitor become dark.
HIf you want the lighting to look more natural, set
“GAIN UP” to “AGC” or “OFF”. (੬ pg. 31, 32)
Other problems
HConsult your nearest JVC dealer.
Coloured bright spots appear all over the
LCD monitor or the viewfinder.
The POWER/CHARGE lamp on the
camcorder does not light during charging.
● The LCD monitor and the viewfinder are made
with high-precision technology. However, black
spots or bright spots of light (red, green or blue)
may appear constantly on the LCD monitor or the
viewfinder. These spots are not recorded on the
tape. This is not due to any defect of the unit.
(Effective dots: more than 99.99 %)
● Charging is difficult in places subject to extremely
high/low temperatures.
HTo protect the battery, it is recommended to
charge it in places with a temperature of 10°C to
35°C. (੬ pg. 52)
● The battery pack is not attached firmly.
HDetach the battery pack once again and re-attach
it firmly. (੬ pg. 13)
The cassette will not load properly.
● The battery’s charge is low.
HInstall a fully charged battery. (੬ pg. 13)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
49
Warning Indications
The memory card cannot be removed from
the camcorder.
(੬ pg. 17)
Displays the battery remaining power.
Remaining power level
Picture does not appear on the LCD
monitor.
High
● The viewfinder is pulled out and “PRIORITY” is
set to “FINDER”.
HPush the viewfinder back in or set “PRIORITY” to
As the battery power comes close to nil, the
When the battery power is exhausted, power
“LCD”. (੬ pg. 18, 31, 34)
● The LCD monitor’s brightness setting is too dark.
HAdjust the brightness of the LCD monitor.
(੬ pg. 16)
HIf the monitor is tilted upward 180 degrees, open
the monitor fully. (੬ pg. 18)
Appears when no tape is loaded. (੬ pg. 16)
CHECK TAPE’S ERASE PROTECTION TAB
An error indication (01 – 04 or 06) appears.
Appears when the erase protection tab is set to
“SAVE” while the Power Switch is set to “A” or
“M” and the VIDEO/MEMORY Switch is set to
“VIDEO”. (੬ pg. 14)
● A malfunction of some kind has occurred. In this
case the camcorder’s functions become
unusable.
H੬ pg. 51.
USE CLEANING CASSETTE
The remote control does not work.
Appears if dirt is detected on the heads during
recording. Use an optional cleaning cassette.
(੬ pg. 53)
● “REMOTE” is set to “OFF”.
HSet “REMOTE” to “ON”. (੬ pg. 31, 33)
● The remote control does not point at the remote
sensor.
HPoint at the remote sensor. (੬ pg. 23)
● The remote control batteries are exhausted.
HReplace the batteries with fresh ones. (੬ pg. 23)
CONDENSATION, OPERATION
PAUSED PLEASE WAIT
Appears if condensation occurs. When this
indication is displayed, wait more than 1 hour
until condensation disappears.
TAPE!
Appears if a tape is not loaded when the
Recording Start/Stop Button or SNAPSHOT
Button is pressed while the Power Switch is set
to “A” or “M” and the VIDEO/MEMORY Switch
is set to “VIDEO”.
TAPE END
Appears when the tape ends during recording or
playback.
SET DATE/TIME!
● Appears when the date/time is not set.
(੬ pg. 15)
● The built-in clock battery has run out and the
previously set date/time has been erased.
Consult your nearest JVC dealer for
replacement.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
50
LENS CAP
?
the lens cap is attached or when it is dark.
compatible with DCF or a file with a size that is
not compatible with this camcorder.
A. DUB ERROR!
COPYING FAILED
Appears if Audio Dubbing is attempted on a
blank portion of a tape. (੬ pg. 46)
● Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used
as a recorder.
● Appears in the following cases when dubbing
from a tape to a memory card:
• when no memory card is loaded.
• when the memory card’s memory is full.
• when the memory card is not formatted.
• when a write-protected SD Memory Card is
loaded. (੬ pg. 28)
A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED
TAPE>
<CANNOT DUB ON A 16BIT RECORDING>
<CHECK TAPE’S ERASE PROTECTION
TAB>
● Appears if Audio Dubbing is attempted on a
tape recorded in the LP mode. (੬ pg. 46)
● Appears if Audio Dubbing is attempted on a
tape recorded in 16-BIT audio. (੬ pg. 46)
● Appears if A. DUB (D) on the remote control is
pressed when the erase protection tab is set to
“SAVE”. (੬ pg. 46)
MEMORY CARD!
Appears if there is no memory card loaded when
you attempt to record on a memory card or
access data on a memory card.
PLEASE FORMAT
INSERT ERROR!
Appears when there is a problem with a memory
card and its memory is corrupt, or it has not
been initialised. Initialise the memory card.
(੬ pg. 30)
Appears if Insert Editing is attempted on a blank
portion of a tape. (੬ pg. 46)
INSERT ERROR!
<CANNOT EDIT ON A LP RECORDED
TAPE>
NO IMAGES STORED
<CHECK TAPE’S ERASE PROTECTION
TAB>
Appears if there are no image files stored in the
memory card when you attempt memory card
playback.
● Appears if Insert Editing is attempted on a
blank portion of a tape.
● Appears if Insert Editing is attempted on a tape
recorded in the LP mode. (੬ pg. 46)
● Appears if INSERT (I) on the remote control
is pressed when the erase protection tab is set
to “SAVE”. (੬ pg. 46)
CARD ERROR!
Appears when the camcorder does not
recognise the loaded memory card. Remove the
memory card once and insert it again. Repeat
these procedures until no indication appears. If
the indication still appears, the memory card is
corrupted.
MEMORY IS FULL
Appears when the memory card’s memory is full
and shooting is not possible.
CHECK CARD’S WRITE PROTECTION
SWITCH
HDV
Appears when you attempt to shoot digital still
images when the write protection tab on the SD
Memory Card is set to the “LOCK” position.
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
EN
51
UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY
Cleaning The Camcorder
The error indications (01, 02 or 06) show what
type of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Remove the power supply
(battery, etc.) and wait a few minutes for the
indication to clear. When it does, you can
resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.
Before cleaning, turn off the camcorder and
remove the battery pack and AC Adapter.
To clean the exterior
Wipe gently with a soft cloth. Put the cloth in
diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE
To clean the lens
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
The error indications (03 or 04) show what type
of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Eject the cassette once and re-
insert it, then check if the indication clears.
When it does, you can resume using the
camcorder. If the indication remains, consult
your nearest JVC dealer.
NOTES:
● Avoid using strong cleaning agents such as
benzine or alcohol.
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth
refer to the cautions of each product.
● To clean the viewfinder, please consult your
nearest JVC dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
52
● Charging times are for a fully discharged battery
pack.
Battery Packs
The supplied battery
pack is a lithium-ion
battery. Before using the
supplied battery pack or
an optional battery pack,
be sure to read the
following cautions:
Terminals
Cassettes
To properly use and store your cassettes, be
sure to read the following cautions:
● During use
...make sure the cassette bears the Mini DV mark.
...be aware that recording onto prerecorded tapes
automatically erases the previously recorded
video and audio signals.
...make sure the cassette is positioned properly
when inserting.
...do not load and unload the cassette repeatedly
without allowing the tape to run at all. This
slackens the tape and can result in damage.
...do not open the front tape cover. This exposes
the tape to fingerprints and dust.
● Store cassettes
...away from heaters or other heat sources.
...out of direct sunlight.
...where they won’t be subject to unnecessary
shock or vibration.
...where they won’t be exposed to strong magnetic
fields (such as those generated by motors,
transformers or magnets).
● To avoid hazards
...do not burn.
...do not short-circuit the terminals. When
transporting, make sure the provided battery cap
is attached to the battery. If the battery cap is
misplaced, carry the battery in a plastic bag.
...do not modify or disassemble.
...do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery to
overheat, explode or catch fire.
...use only specified chargers.
● To prevent damage and prolong service
life
...do not subject to unnecessary shock.
...charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type battery —
cooler temperatures impede chemical reaction,
while warmer temperatures can prevent
complete charging.
...vertically, in their original cases.
Memory Cards
...store in a cool, dry place. Extended exposure to
high temperatures will increase natural discharge To properly use and store your memory cards,
and shorten service life.
be sure to read the following cautions:
● During use
...make sure the memory card bears the SD or
MultiMediaCard mark.
...make sure the memory card is positioned
properly when inserting.
● While the memory card is being accessed
(during recording, playback, deletion,
initialisation, etc.)
...never unload the memory card and never turn off
the camcorder.
● Store memory cards
...away from heaters or other heat sources.
...out of direct sunlight.
...fully charge and then fully discharge the battery
every 6 months when storing the battery pack
over a long period time.
...remove from charger or powered unit when not in
use, as some machines use current even when
switched off.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a
large power capacity. However, when one is
exposed to cold temperatures (below 10°C),
its usage time becomes shorter and it may
cease to function. If this happens, place the
battery pack in your pocket or other warm,
protected place for a short time, then re-
attach it to the camcorder.
...where they won’t be subject to unnecessary
shock or vibration.
...where they won’t be exposed to strong magnetic
fields (such as those generated by motors,
transformers or magnets).
NOTES:
● It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging: 10°C to 35°C
Operation: 0°C to 40°C
Storage: –20°C to 50°C
● The lower the temperature, the longer recharging
takes.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
53
● To protect the unit, DO NOT
...allow it to become wet.
...drop the unit or strike it against hard objects.
LCD Monitor
● To prevent damage to the LCD monitor, DO
NOT
...subject it to shock or excessive vibration during
...push it strongly or apply any shocks.
...place the camcorder with the LCD monitor on the
bottom.
transportation.
...keep the lens directed at extremely bright objects
for long periods.
● To prolong service life
...expose the lens and viewfinder’s lens to direct
sunlight.
...carry it by holding the LCD monitor or the
viewfinder.
...swing it excessively when using the hand strap or
the grip.
...swing the soft camera case excessively when the
camcorder is inside it.
● Dirty heads can cause the following
problems:
...avoid rubbing it with coarse cloth.
● Be aware of the following phenomena for
LCD monitor use. These are not
malfunctions
...While using the camcorder, the surface around
the LCD monitor and/or the back of the LCD
monitor may heat up.
...If you leave power on for a long time, the surface
around the LCD monitor becomes hot.
Main Unit
● For safety, DO NOT
...open the camcorder’s chassis.
...disassemble or modify the unit.
...short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
...allow inflammables, water or metallic objects to
enter the unit.
...remove the battery pack or disconnect the power
supply while the power is on.
...leave the battery pack attached when the
camcorder is not in use.
...No picture during playback.
...Blocks of noise appear during playback.
...During recording or playback, the Head Clog
Warning indicator “ ” appears.
...Recording cannot be performed properly.
In such cases, use an optional cleaning
cassette. Insert it and play back. If the cassette
is used more than once consecutively, damage
to the video heads may result. After the
camcorder plays back for about 20 seconds, it
stops automatically. Also refer to the cleaning
cassette’s instructions.
● Avoid using the unit
...in places subject to excessive humidity or dust.
...in places subject to soot or steam such as near a
cooking stove.
If, after using the cleaning cassette, the
problems still exist, consult your nearest JVC
dealer.
...in places subject to excessive shock or vibration.
...near a television set.
Mechanical moving parts used to move the
video heads and video tape tend to become
dirty and worn out over time. In order to maintain
a clear picture at all times, periodic check-ups
are recommended after using the unit for about
1,000 hours. For periodic check-ups please
consult your nearest JVC dealer.
...near appliances generating strong magnetic or
electric fields (speakers, broadcasting antennas,
etc.).
...in places subject to extremely high (over 40°C) or
extremely low (under 0°C) temperatures.
● DO NOT leave the unit
...in places of over 50°C.
...in places where humidity is extremely low (below
35%) or extremely high (above 80%).
...in direct sunlight.
...in a closed car in summer.
...near a heater.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
54
How To Handle A CD-ROM
About moisture condensation
● You have observed that pouring a cold liquid
into a glass will cause drops of water to form on
the glass’ outer surface. This same
● Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or back
surface. If the CD-ROM gets dirty, gently wipe it
with a soft cloth outward from the centre hole.
● Do not use conventional disc cleaners or cleaning
spray.
● Do not bend the CD-ROM or touch its mirror
surface.
● Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool place
to a warm place, after heating a cold room,
under extremely humid conditions or in a place
directly subjected to the cool air from an air
conditioner.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC
dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack,
AC Adapter, etc.) and wait a few minutes and
then re-connect it and proceed as usual from
the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
55
Maximum recording time (using 80 min.
cassette)
Camcorder
SP: 80 min., LP: 120 min.
For General
Power supply
For Digital Still Camera
DC 11 V (Using AC Adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 3.2 W (3.5 W*) (LCD monitor off, viewfinder
Storage media
SD Memory Card/MultiMediaCard
Compression system
JPEG (compatible)
File size
on)
Approx. 4.2 W (4.5 W*) (LCD monitor on, viewfinder
off)
Still image:
2 modes (1024 x 768 pixels/640 x 480 pixels)
Picture quality
2 modes (FINE/STANDARD)
Approximate number of storable images
੬ pg. 25
*
Using LED Light
Dimensions (W x H x D)
56 mm x 94 mm x 112 mm (with the LCD monitor
closed and the viewfinder pushed back in)
Weight
For Connectors
Approx. 430 g (without battery, cassette, memory
card and lens cap)
Approx. 510 g (incl. battery, cassette, memory card
and lens cap)
Operating temperature
0°C to 40°C
Operating humidity
35% to 80%
Storage temperature
–20°C to 50°C
Pickup
1/6" CCD
Lens
S/AV
S-Video output:
Y: 1.0 V (p-p), 75 Ω, analogue
C: 0.29 V (p-p), 75 Ω, analogue
Video output: 1.0 V (p-p), 75 Ω, analogue
Audio output: 300 mV (rms), 1 kΩ, analogue, stereo
Microphone input
ø3.5 mm, stereo
DV
Output: 4-pin, IEEE1394 compliant
USB
Mini USB-B type, USB 1.1/2.0 compliant
F 1.8, f = 2.2 mm to 55 mm, 25:1 power zoom lens
Filter diameter
ø27 mm
LCD monitor
2.5" diagonally measured, LCD panel/TFT active
matrix system
Viewfinder
Electronic viewfinder with 0.16" colour LCD
Speaker
AC Adapter
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
DC 11 V G, 1 A
Monaural
LED Light
Effective distance: 1.5 m
Specifications shown are for SP mode unless
otherwise indicated. E & O.E. Design and
specifications subject to change without notice.
For Digital Video Camera
Format
DV format (SD mode)
Signal format
PAL standard
Recording/Playback format
Video: Digital component recording
Audio: PCM digital recording, 32 kHz 4-channel
(12-BIT), 48 kHz 2-channel (16-BIT)
Cassette
Mini DV cassette
Tape speed
SP: 18.8 mm/s, LP: 12.5 mm/s
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS
A
AC Adapter ....................................................14 Night-Scope ...................................................38
Backlight Compensation ................................40 Playback Special Effects ................................24
Battery Pack .......................................13, 14, 52 Power-Linked Operation ................................15
Beep ...............................................................33 Program AE With Special Effects ..................42
B
Blank Search ..................................................21
Q
C
Connections To A TV Or VCR .......................22
Tape ........................................................18
D
Data Battery ...................................................14 Remote Control ..............................................23
Date/Time Settings ........................................15 Resetting The File Name ...............................28
Spot Exposure Control ...................................40
Digital Image Stabilisation (DIS) ....................32
DPOF Setting (Digital Print Order Format)
E
Exposure Control ...........................................39
T
I
Tape Speed (REC MODE) .......................32, 35
Image Size .....................................................34 Telephoto Setting ...........................................33
Initialising A Memory Card .............................30 Time Code ...............................................19, 34
Insert Editing ..................................................46 Tripod Mounting .............................................16
Iris Lock ..........................................................39 Troubleshooting .............................................47
L
W
LCD Monitor and Viewfinder ....................16, 18 Warning Indications .......................................49
LED Light .......................................................37 White Balance ................................................40
Live Slow ........................................................37 Wide Mode .....................................................33
Loading A Cassette ........................................16 Wipe Or Fader Effects ...................................41
Loading A Memory Card ................................17
Z
M
Zooming .............................................19, 24, 32
Manual Focus ................................................38
Memory Card ...........................................17, 52
5-Second Recording ......................................37
Motor Drive Mode ..........................................38
Printed in Malalysia
EX
0105MKH-ID-VM
© 2005 VictoDroCwonmlopaadnyfroofmJaWpawnw, L.Simoimtedanuals.com. All Manuals Search And Download.
|