Mini DV & HDD & DVD VIDEO RECORDER
SR-DVM600U
TV
DVD
STANDBY/ON
OUTPUT
TV/
TV
SELECT VIDEO
DV
HDD
DVD
TV
PR/CH
CANCEL
MEMO/MARK
INPUT SELECT
PROG
F1
F2
EDIT
TOP MENU
NAVIGATION
RETURN
ENTER
MENU
PREVIOUS
SLOW
NEXT
SLOW
PLAY
REC
STOP/CLEAR
PAUSE
DISPLAY
ON SCREEN
STANDBY/ON
DISPLAY
REC MODE/
REMAIN
ANGLE/
AUDIO
SUBTITLE
EE CHECK
EJECT
EJECT
DV/HDD/DVD
STOP
REC MODE
INSTANT REPLAY
AUDIO DUB.
REC
INSERT
DV
REC
HDD
REC
DVD
REC
PROGRESSIVE
SCAN
EE
DUBBING
SET UP
S-VIDEO
INPUT OUTPUT
SELECT SELECT
VIDEO (MONO)L
-
AUDIO
-
R
REW
PLAY
FF
PAUSE
DV IN/ OUT
IN F-1
NTSC
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear of
cabinet. Retain this information for
future reference.
Model No.
Serial No.
INSTRUCTIONS
EN
LPT1138-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY FIRST
EN
3
ANTENNA INSTALLATION INSTRUCTIONS
1. Outdoor Antenna Grounding
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding connectors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Electrical energy can perform many useful functions. But improper
use can result in potential electrical shock or fire hazards. This
product has been engineered and manufactured to assure your
personal safety. In order not to defeat the built-in safeguards,
observe the following basic rules for its installation, use and
servicing.
ATTENTION:
2. Lightning
Follow and obey all warnings and instructions marked on your
product and its operating instructions. For your safety, please read
all the safety and operating instructions before you operate this
product and keep this booklet for future reference.
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges.
INSTALLATION
1. Grounding or Polarization
3. Power Lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them
might be fatal.
(A)Your product may be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a
safety feature.
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
(B)Your product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source indicated
on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. If your product is intended to operate from battery power,
or other sources, refer to the operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered.
● Do not block the openings by placing the product on a bed, sofa,
rug or other similar surface.
● Do not place the product in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY FIRST
4
EN
USE
SERVICING
1. Servicing
1. Accessories
To avoid personal injury:
If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
● Do not place this product on an unstable cart, stand, tripod,
bracket, or table. It may fall, causing serious injury to a child or
adult, and serious damage to the product.
● Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product.
● Use a mounting accessory recommended by the manufacturer
and follow the manufacturer’s instructions for any mounting of
the product.
2. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product to its normal operation.
● Do not try to roll a cart with small casters across thresholds or
deep-pile carpets.
2. Product and Cart Combination
A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
3. Water and Moisture
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance^this indicates a need for service.
Do not use this product near water^for
example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and the like.
3. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or which have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
4. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
4. Safety Check
5. Attachments
the service technician to perform safety checks to determine
Do not use attachments not recommended by the manufacturer
of this product as they may cause hazards.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
HOW TO USE THIS INSTRUCTION MANUAL
Contents on page 6. Use this when searching for information on
a specific procedure or feature.
● The Index on pages 12 - 15 illustrates the controls and
connections on the front and rear panel, the front display panel
and the remote control.
7. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
● The list of terms on page 71 lists frequently-used terms, and the
number of the page on which they are used or explained in the
manual.
● The A mark signals a reference to another page for instructions
or related information.
of each major section.
BEFORE YOU INSTALL YOUR NEW UNIT . . .
. . . please read the sections/literature listed below.
● ACautionsB on page 2
● AIMPORTANT PRODUCT SAFETY INSTRUCTIONSB on
pages 3 - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY FIRST
EN
5
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you move it from
a cold place to a warm place, or under extremely humid
conditions^just as water droplets form on the surface of a glass
filled with cold liquid. In conditions where condensation may occur,
disconnect the unit’s power plug from the wall and keep it
disconnected for a few hours to let the moisture dry, then turn on
the unit.
NTSC
● Manufactured under license from Dolby Laboratories. ADolbyB
and the double-D symbol are trademarks of Dolby Laboratories.
● ADTSB and ADTS DIGITAL OUTB are trademarks of Digital
Theater Systems, Inc.
● This unit can play back and record only NTSC signals. PAL
signals can also be played back on the DVD deck.
DISCLAIMER OF LIABILITY
JVC shall not be liable for any loss relating to the unit’s failure to
properly record, store or playback any content (video, audio or
otherwise) for any reason whatsoever. Any applicable warranties
shall only cover replacement or repair of the effected unit, and shall
not apply to recovery or replacement of lost content.
● This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
ATTENTION:
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
8
8
8
Using a mobile phone in the vicinity of the unit may cause
picture vibration on the TV screen or change the screen to a
black back display.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Some TVs or other appliances generate strong magnetic
fields. Do not place such appliances on top of the unit as it
may cause picture disturbance.
When moving the product, press A to turn off the power,
and wait at least 30 seconds before unplugging the power
cord. Then, wait at least 2 minutes before moving the
product.
If there is a power outage when using the unit, the recorded
data may be erased.
It is recommended to back up discs which contain important
recordings periodically (every few years). As digital signals
do not deteriorate, failure to play back or record might arise
due to the effects of the disc aging through the years
depending on the storage environment.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc/cassette.
1. DO NOT place the unit ^
^ in an environment prone to extreme temperatures or
humidity.
^ in direct sunlight.
^ in a dusty environment.
^ in an environment where strong magnetic fields are
generated.
8
8
^ on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
8
Recorded programs and data cannot be restored once the
disc or tape is damaged.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
EN
SAFETY FIRST
DV Dubbing (HDD & DVD Deck Only) ........................................ 49
Insert Editing (DV Deck Only)...................................................... 55
Life Span Of Parts........................................................................11
INDEX
12
REMOTE CONTROL
56
Basic Connections .......................................................................18
INITIAL SETTINGS
19
Monitor Set...................................................................................21
BASIC OPERATIONS ON DVD DECK
22
Playback Features .......................................................................23
Finalize A Disc (DVD Deck Only) ................................................ 62
Scan Mode Set (HDD & DVD Deck Only) ................................... 65
BASIC OPERATIONS ON HDD DECK
Basic Playback.............................................................................31
BASIC OPERATIONS ON DV DECK
APPENDIX
69
70
71
SPECIFICATIONS
LIST OF TERMS
NAVIGATION ON HDD/DVD DECK
Library Database Navigation........................................................38
Edit Original Information...............................................................39
Edit Play List Information .............................................................41
Navigate Library Information........................................................43
Playback With MP3/WMA/JPEG Navigation................................44
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
7
DVD-R/RW Discs
It is only possible to use DVD-R discs which conform with DVD-R
standard Version 2.0.
About Discs
When a DVD-R/RW disc (Video mode) is finalized (A pg. 62), it
can be played back on a standard DVD player as a DVD VIDEO
disc.
When a DVD-R/RW disc (VR mode) is finalized (A pg. 62), it can
be played back on a standard DVD player compatible with the VR
mode of DVD-R/RW discs.
Recordable/Playable Discs
You can use discs with the following logos for recording and
playback.
Before finalizing ^
^ it is possible to record on unrecorded areas of the disc, edit the
disc title and program titles, and delete programs.
● It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalized.
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
DVD-RAM
DVD-RW
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Ver. 2.0/2x speed
Ver. 2.1/1x – 3x speed
12 cm: 4.7 GB/9.4 GB
Ver. 1.1/1x – 2x speed
(Video mode/VR mode)
Ver. 1.2/4x speed
After finalizing ^
(Video mode/VR mode)
After a DVD-R/RW disc (Video mode) has been finalized, it is
possible to play back the recorded programs (video and/or audio)
on a standard DVD video player as a DVD VIDEO disc.
● Edited titles are displayed as the
ADVD menuB in video mode.
● It is impossible to record, edit or
delete the data either in video
mode or in VR mode.
HOME MOVIES
DOCUMENTARIES
TRAVELLING CLIPS
DVD-R
12 cm: 4.7 GB
● Either in video mode or in VR
mode, although the disc can be
played back on DVD players from
other manufacturers, sometimes it
may not be possible to play back depending on the disc and
recording conditions.
8 cm: 1.4 GB
MTV
CARTOON
Ver. 2.0/1x – 4x/8x speed
(Video mode/VR mode)
Ver. 2.1/16x speed
(Video mode/VR mode)
● The above table is based on the information as of August 2006.
● Recording and playback may not be performed depending on the
characteristics and condition of the disc used, leading to
unsatisfactory results. Using discs manufactured by JVC is
recommended since they have been tested to be compatible with
this unit.
● It is impossible to record on CD-R/RW or DVD-R discs used for
authoring.
● It is impossible to record onto DVD-R/RW (Video mode) discs
broadcasts that allow you to copy once. The copy once programs
can only be recorded onto DVD-R/RW discs formatted in VR
mode.
NOTES:
DVD-RAM Discs
● The following may result if you play back a DVD-R disc recorded
on another unit.
● The disc does not play.
It is only possible to use discs which conform with DVD-RAM
standard Version 2.0 or 2.1.
● It is impossible to record on DVD-RAM discs which do not
conform to this standard. If you use a disc formatted under a
different standard version, format it on this unit before use.
● It may not be possible to record, play back, edit or dub a
DVD-RAM disc even if it conforms to the standard if it was
recorded or edited on the devices from other manufacturers or on
a PC, or if it has far too many titles, or if there is very little
available capacity remaining on the disc.
● A mosaic pattern (block noise) appears on the screen.
● Video or audio may be dropped out.
● The unit stops during playback.
● 6x speed DVD-RW disc cannot be used on this unit.
● DVD-RAM discs recorded on this unit cannot be played back on
an incompatible DVD player.
● It is possible to record copy-once programs of digital broadcasts
only onto 4.7/9.4 GB DVD-RAM discs (2.8 GB DVD-RAM discs
are not compatible).
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
8
EN
Discs For Playback Only
Unplayable Discs
You can use discs with the following logos for playback only.
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
DVD VIDEO
Video CD/Super Video CD
(example of region code
indications)
● CD-ROM discs (including PHOTO-CD and CD-G)
● Discs recorded in Packet Write (UDF) format
● 1.3-GB double density CDs (DDCD)
● High density CDs (HDCD)
The following discs also cannot be played back.
● Discs of a region number other than A1B
● DVD-RAM (2.6 GB/5.2 GB)
Audio CD
CD-DA files
CD-R
CD-DA/JPEG/
MP3/WMA files
● DVD-RAM (TYPE1)
Caution for DualDisc playback
The Non-DVD side of a ADualDiscB does not comply with the
ACompact Disc Digital AudioB standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may not be recommended.
CD-ROM
JPEG/MP3/
WMA files
CD-RW
CD-DA/JPEG/
MP3/WMA files
Region Number
The world is divided into 6 regions for DVD VIDEO discs.
DVD VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played back
on this unit unless the region number of the disc matches that of
the unit. The region number for this unit is A1B. Only discs whose
region number includes A1B or AALLB can be played back such as
shown below.
● Playback may not be performed depending on the characteristics
and condition of the disc used.
● DTS Audio CDs can also be played back (An optional DTS
decoder is required).
● MP3 and JPEG discs can be played back on this unit only when
they have been recorded in the ISO9660 or Joliet format and
finalized.
● JPEG files that can be played back on this unit must conform to
JFIF/Baseline process, and the maximum resolution of a JPEG
file is 2,812 pixels in width and 2,112 pixels in height.
● CD-R/RW discs recorded in music CD format need to be finalized
to play back on this unit.
Examples of DVD VIDEO labels which can be played back
using this unit.
● Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Marks of discs in this instruction manual
Before you play back a CD, check for the CD logo and read the
notes on the package to confirm that it conforms to the Compact
Disc specification.
Allows operation with a
DVD-RAM disc.
Allows operation with a
Video CD/Super Video
CD (SVCD) disc.
● Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD/SVCD discs
may be restricted. Since this unit plays back discs according to
the intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
● When switching from the first layer to the second layer of double-
layered DVD VIDEO discs, the image and sound may be
momentarily distorted. This is not a malfunction.
● DVD-AUDIO discs compatible with DVD video players can be
played.
Allows operation with a
DVD-R disc.
Allows operation with
an Audio CD disc.
Allows operation with a
DVD-RW disc.
Allows operation with a
disc including MP3
files.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
disc including JPEG
files.
● Super Audio CDs (SACD) compatible with conventional CD
players can be played.
● +R/+RW discs recorded and finalized in Video mode can be
played. ADVDB will light on the front display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
9
Audio CD/Video CD/SVCD
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video CD/
SVCD discs.
However, some discs are not divided into tracks.
Recording Medium And Format
DVD-RAM
● Recording and erasing can be performed as many times as
possible on a disc.
● Editing can be performed after recording, such as deleting
unwanted parts.
● While recording, it is possible not only to start playback of a
program currently being recorded, but also to watch another
program previously recorded.
Audio CD or Video CD/SVCD
Track 1
Track 2
Track 3
Track 4
DVD-RW (VR mode)
● Recording and erasing can be performed as many times as
possible on a disc.
● Editing can be performed after recording, such as deleting
unwanted parts.
● Recording of copy once programs are possible using a CPRM
compatible disc.
JPEG/MP3 Disc (CD-R/RW/ROM)
MP3/JPEG files put in directories nested in several levels on a disc
will be organized as if they were put in single level directories
(groups) by the MP3/JPEG Navigation of this unit. (A pg. 44)
File structure of a disc before starting the MP3/JPEG
Navigation
DVD-RW (Video mode)
● Can be played back on other DVD players.
● New recording can be performed by erasing all the data on a disc
once played back.
DVD-R (VR mode)
● Editing can be performed after recording, such as deleting
unwanted parts.
● Recording of copy once programs are possible using a CPRM
compatible disc.
Directory
MP3 file
JPEG file
DVD-R (Video mode)
● Can be played back on other DVD players.
● Suitable when keeping a recorded disc for a long time.
File structure of the disc after starting the MP3/JPEG
Navigation
Files are automatically grouped as follows and displayed on the
MP3/JPEG Navigation screen. Data is displayed in the
alphabetical order of file name. Files are grouped based on roots.
File Structure Of Discs
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
AtitlesB. Each title has a number (title number) that can be used to
select desired titles. Titles are further divided into units called
AchaptersB. Each chapter has a number (chapter number) that can
also be used to select desired chapters. Note that some discs are
not divided into titles and chapters.
When you record a program on a DVD-RAM/R/RW (VR mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes from monaural to stereo
due to commercial breaks, etc. It is also possible to insert chapter
marks at desired locations during playback. (A pg. 25)
When you record a program on a DVD-R/RW (Video mode)
disc
A single recording session results in a single title (a single
chapter). However, chapter marks are automatically inserted when
recording is paused, or audio changes due to commercial breaks,
etc. It is also possible to insert chapter marks at desired locations
during either recording or playback. Once the disc has been
finalized, these chapter marks are deleted and new chapter marks
are assigned automatically approximately every 5 minutes.
● This unit can recognize up to 9 hierarchies including directories
and files.
Also, it can recognize up to 250 files in each group, and up to 99
groups on a disc.
NOTES:
● Video CD/SVCD discs that support Playback Control (PBC)
The contents of a disc are recorded into several hierarchies, and
played back according to the instructions on the screen while
navigating through the hierarchies. It is also possible to playback
recorded tracks consecutively without activating the PBC function
even when playing a PBC-compatible disc. (A pg. 26)
● Regarding the contents recorded on discs
Some files may not be played back depending on the file types
and other factors.
DVD-RAM, DVD-RW, DVD-R or DVD VIDEO disc
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3
Chapter 1 Chapter 2 Chapter 3
● In Video mode, even before finalizing, it is impossible to perform
editing operations other than changing the disc name and/or title
names and deleting programs and/or titles.
● After finalizing, it is impossible to perform editing operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
10
DVD VIDEO Marks
Placing A Disc
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.
Opening the disc tray
Press M to open the disc tray.
Marks related to video
Number of subtitles
Number of angles
EJECT
DV/HDD/DVD
STOP
REC MODE
INSTANT REPLAY
AUDIO DUB.
REC
INSERT
DVD
REC
REW
PLAY
FF
PAUSE
DV IN/ OUT
Recorded under the
standard 4:3 aspect
ratio
Screen includes black
bands at the top and
the bottom of image
which has a standard
4:3 aspect ratio (letter
box)
● Pressing the button again closes the disc tray.
● Use the button to open and close the disc tray.
● Do not block the disc tray with your hand while it is opening or
closing as this may result in hardware failure.
● Do not place unplayable discs or any object other than a disc on
the disc tray.
Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.
● Do not press down strongly on the disc tray or place any heavy
objects on it.
Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).
Discs without cartridges
Marks related to audio
Number of audio tracks
P
OP
ST
SE
LO
N/C
PE
Dolby Digital Stereo Creator mark
Developed by Dolby Laboratories. It enables
audio recording in high-quality stereo Dolby
Digital.
Disc tray
Place the disc on the disc tray with the label side facing up. Since
disc size changes depending on the disc to be played back, be
sure to correctly align the disc with the grooves for its size. If the
disc is not in its groove, it may be scratched or otherwise damaged.
To insert an 8 cm disc, place it according to the inner groove.
DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL OUT connector of the unit.
DVD-RAM discs contained in cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with ASide AB facing down, programs are recorded on the side A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
EN
11
Care And Handling Of Discs
Life Span Of Parts
Cooling fan
Periodical inspection and maintenance are requisite to maintain
the initial performance and reliability of the product.
We recommend the exchange of the fan motor every three years.
How to handle discs
When handling a disc, do not
touch the surface of the disc.
Since discs are made of
plastic, they are easily
damaged. If a disc gets dirty,
dusty, scratched or warped, the
images and sound will not be
picked up correctly, and such a
disc may cause the unit to malfunction.
HDD
The HDD is a consumable part. Please arrange for maintenance
after an estimated usage of 10,000 hours (this estimation is based
on usage under the environment of 25f, it may differ depending
on the usage environment).
Label side
Please consult your authorized dealer or nearest JVC service
center on the maintenance and cost.
Do not damage the label side, stick paper to or use any adhesives
on its surface.
Recording side
Make sure that discs are not scratched or dirty on the recording
side before use. Scratches and dirt on the recording side of a disc
may hinder proper playback and recording. Also be careful that a
DVD-RAM disc may get scratched or dirty when removed from
cartridge then put back in after use.
Storage
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering
to a disc, wipe with a soft dry cloth, moving
from the centre outwards.
If a disc is difficult to clean, wipe with a cloth
moistened with water. Never use record
cleaners, petrol, alcohol or any anti-static
agents.
CAUTION:
Sometimes during playback, noise may appear or images may
be garbled. This is sometimes due to the disc. (It may not be up
to industry standards.)
These symptoms are caused by the discs, not by the malfunction
of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
12
Front View
J
E
C
K
A
B
D
F
G
H
I
L
M
STANDBY/ON
DISPLAY
EJECT
EJECT
DV/HDD/DVD
STOP
REC MODE
INSTANT REPLAY
AUDIO DUB.
REC
INSERT
DV
REC
HDD
REC
DVD
REC
S-VIDEO
VIDEO (MONO)L
-
AUDIO
-
R
INPUT OUTPUT
SELECT SELECT
REW
PLAY
FF
PAUSE
DV IN/ OUT
IN F-1
W
QR
T
U V
N
S
X Y Z
a
O
A STANDBY/ON Button (A)
R Output Select Button (OUTPUT SELECT)
C Mini DV Cassette Loading Slot
D DV Lamp (DV) A pg. 33
● Switches between AALLB (DV/HDD/DVD output) and ADVB (DV
output) when pressed. When AALLB is selected, DV, HDD or
DVD signals are output from the [DV/HDD/DVD OUTPUT]
connectors on the rear panel depending on the deck selected.
When ADVB is selected, DV signals are output regardless of the
deck selected.
DV Recording Lamp (REC)
E HDD Lamp (HDD) A pg. 20
HDD Recording Lamp (REC)
F DVD Lamp (DVD) A pg. 20, 22
DVD Recording Lamp (REC)
ATTENTION:
G Eject Button (M) (DVD) A pg. 10
display panel and TV screen respectively when EDIT or
Press OUTPUT SELECT to stop the blinking and return to the
mode.
I Recording Mode Button (REC MODE) A pg. 49
J Instant Replay Button (INSTANT REPLAY) A pg. 24, 32, 34
K Disc Tray
L Audio Dubbing Button (AUDIO DUB.) A pg. 54
M Insert Button (INSERT) A pg. 55
N Display Button (DISPLAY) A pg. 25
O S-video Input Connector [S-VIDEO] A pg. 51
P Video/Audio Input Connectors
[VIDEO/AUDIO ((MONO) L/R)] A pg. 51
Q Input Select Button (INPUT SELECT) A pg. 49, 51
T Infrared Beam Receiving Window
36
Rewind Button (O) (DV deck) A pg. 33, 34
W Play Button (I) A pg. 22, 31
X Forward Search Button (N) (HDD & DVD deck) A pg. 23,
36
Fast Forward Button (N) (DV deck) A pg. 33, 34
Y Pause Button (W) A pg. 22, 31
Z Record Button (R)
a DV Input/Output Connector [DV IN/OUT(A*)] A pg. 49
● This connector can also be used as a direct connection to NLE
(Non-Linear Editing) systems or to a PC for downloading,
editing and archiving.
● [DV OUT] is available for DV deck only.
* A (i.Link) refers to the IEEE1394-1995 industry specification and
extensions thereof. The A logo is used for products compliant with the
i.Link standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
13
Rear View
A
B
C
D
E
F
HDD/DVD
OUTPUT INPUT L-1
OUTPUT
DV/HDD/DVD
S-VIDEO
S-VIDEO
S-VIDEO
COMPONENT
VIDEO OUT
VIDEO
VIDEO
VIDEO
Y
PB
PR
DV/HDD/DVD
OUTPUT
HDD/DVD
DIGITAL AUDIO OUT
L
L
AUDIO
R
L
AUDIO
R
PCM/STREAM
AUDIO
VIDEO
COAXIAL OPTICAL
REMOTE IN
R
G
H
I
A AC Power Cord A pg. 18
B Cooling Fan
● This prevents the temperature from rising inside the unit.
Do not remove it.
D S-VIDEO/VIDEO/AUDIO OUTPUT Connectors (HDD & DVD
deck only)
used to connect to a second monitor.
● Install the unit so as not to block the area around the fan.
F S-VIDEO/VIDEO/AUDIO OUTPUT Connectors A pg. 18
G Digital Audio Output Connectors
[DIGITAL AUDIO OUTPUT (OPTICAL/COAXIAL)] (HDD &
DVD deck only) A pg. 53, 57
H BNC Video Output Connector [VIDEO OUTPUT] A pg. 18
I Remote Input Connector* [REMOTE IN]
* There is currently no compatible remote control unit available.
● The unit may become hot when it is turned off, as the cooling
fan on the rear of the unit is not activated. However, the cooling
fan may be activated in the standby mode when AQUICK
STARTUPB is set to AONB.
C Component Video Output Connectors [COMPONENT
VIDEO OUT (Y/PB/PR)] (HDD & DVD deck only) A pg. 18
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
14
Front Display Panel
A
B
C
D
E
F
G
H
I
J
LPCM
FR
XP SP LP EP
VR + RW VCD
RAM
-
-
L
M
N
O
P
Q
A Disc Type Indicator
I Random/Program Playback Mode Indicator (RND/PRGM)
A pg. 30
When a disc is loaded, the type of the disc is indicated.
ARNDB:
Lights when Random Playback mode is set.
When a disc is running, the disc marks rotate.
VR Mode Indicator (VR) A pg. 61
Lights when a DVD-R/RW disc is formatted in VR mode.
B Linear PCM Indicator (LPCM)
Lights when AXP MODE REC AUDIOB is set to ALINEAR PCMB
(A pg. 59) for recording with HDD, DVD-RAM, DVD-R and
DVD-RW discs, and when Linear PCM audio is played.
C Cassette Loaded Mark (u)
APRGMB: Lights when Program Playback mode is set.
J Repeat Mode Indicator (x/1/A-B) A pg. 27
AxB:
Ax1B:
Whole disc is played back repeatedly.
A single title/chapter/track is played back
repeatedly.
AxA-BB: The selected part (A-B) is played back repeatedly.
No display: Repeat Playback mode is off.
Indicates the present of a cassette in the DV deck.
Lights when a cassette is loaded into the DV deck. It will remain
lit as long as the cassette is loaded, even if the HDD or DVD
deck is being selected.
K Video Output Indicator (q) A pg. 65
No display: Indicates that interlace mode is engaged.
q:
Indicates that progressive mode is engaged.
(Example) q lights when video output mode is in progressive
mode.
D Recording Mode Indicator (XP/SP/LP/EP/FR) A pg. 50
Blinks when recording mode is being set.
L Group/Title Number Display
While AFRB is blinking, the left 3 digits of the Multi Display (L
N) indicate setting values ranging from A60B to A480B. After the
value has been set, only AFRB lights.
M Audio Dubbing/Insert Editing Indicator
AADUBB or AINSB lights up during Audio Dubbing or Insert
Editing respectively.
E Group/Title Indicator (GRP/TITLE)
N Track/Chapter Number Display
AGRPB or ATITLEB lights depending on a disc loaded while the
left 2 digits of the Multi Display (L) indicate the numbers
explained below.
AGRPB: Total number of groups or group number being played
back are displayed on the Multi Display.
ATITLEB: Total number of titles or title number being played
back are displayed on the Multi Display.
O Remaining Time/Elapsed Time Indicator A pg. 25
Lights when remaining time of HDD, DVD-RAM, DVD-R and
DVD-RW discs is displayed, and lights out when elapsed time is
displayed.
The right 6 digits of the Multi Display (P) indicate elapsed or
remaining time of each track.
No display: Indicates elapsed time of the disc.
Displayed: Indicates remaining time of the disc.
P Remaining Time/Elapsed Time Display A pg. 25
Time Code Display A pg. 34
F External Input Indicator
Indicates the external input selected.
G Track/Chapter Indicator (TRK/CHAP)
ATRKB or ACHAPB lights depending on a disc loaded while the
the numbers explained below.
Q Multi Display
Displays clock, received channel, elapsed time, and remaining
time.
ATRKB: Total number of tracks or track number being played
back are displayed on the Multi Display.
Also displays status of the unit (NO DISC/OPEN/CLOSE/
READING).
ACHAPB: Chapter number being played back are displayed on
the Multi Display.
H Simulated Surround Effect Indicator (3D) A pg. 29
Lights when a simulated surround effect is set to A3D-ONB on
the on-screen bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
J Selection Keys (FGD E) A pg. 19
K Menu Button (MENU) A pg. 23
Remote Control
L Reverse Skip Button (S) A pg. 23, 32, 36
36
N Record Button (R)
O Display Button (DISPLAY) A pg. 25, 34
Q Recording Mode Button (REC MODE) A pg. 49
U
V
TV
DVD
A
STANDBY/ON
OUTPUT
TV/
TV
SELECT VIDEO
B
C
W
X
DV
HDD
DVD
D
TV
Y
S EE Button A pg. 36
E
T Dubbing Button (DUBBING) A pg. 45
U TV/DVD switch A pg. 20, 56
PR/CH
V STANDBY/ON Button (A)
Z
CANCEL
MEMO/MARK
W TV/VIDEO Button A pg. 56
X DVD Button* A pg. 22
F
* This button will not function during navigation mode or set up mode.
Z TV Program Buttons (PR/CH +/–) A pg. 56
a Memo Button (MEMO) A pg. 39, 42
Mark Button (MARK) A pg. 25
c Edit Button (EDIT) A pg. 39
e Enter Button (ENTER) A pg. 20
f Return Button (RETURN) A pg. 26, 28
36
INPUT SELECT
PROG
a
b
c
d
G
H
EDIT
F1
F2
TOP MENU
NAVIGATION
I
J
ENTER
e
f
g
MENU
RETURN
NEXT
K
PREVIOUS
SLOW
L
M
N
PLAY
SLOW
h
i
j
k
l
REC
PAUSE
STOP/CLEAR
i Play Button (I) A pg. 22, 31
DISPLAY
ON SCREEN
O
P
Q
R
S
j Pause Button (W) A pg. 22, 31
REC MODE/
REMAIN
ANGLE/
AUDIO
SUBTITLE
EE CHECK
k Stop Button (o) A pg. 22, 31
m
n
Clear Button (CLEAR) A pg. 30
PROGRESSIVE
SCAN
EE
DUBBING
SET UP
l Skip Search Button (v) A pg. 24, 31, 34, 36
m Instant Replay Button (w) A pg. 24, 32, 34, 36, 37
n Angle Button (ANGLE) (DVD deck only) A pg. 25
EE Check Button (EE CHECK) A pg. 36
o Set Up Button (SET UP) A pg. 20, 58
p Subtitle Button (SUBTITLE) A pg. 26
q Progressive Scan Button (PROGRESSIVE SCAN) A pg. 65
o
p
q
T
How To Use
Before use, insert two AA size batteries into the remote control
with the polarity (F and G) matched correctly as indicated on
the battery compartment or on the lid.
A Output Select Button (OUTPUT SELECT)
● Switches between AALLB (DV/HDD/DVD output) and ADVB (DV
output) when pressed. When AALLB is selected, DV, HDD or
DVD signals are output from the [DV/HDD/DVD OUTPUT]
connectors on the rear panel depending on the deck selected.
When ADVB is selected, DV signals are output regardless of the
deck selected.
The remote control can operate most of your unit’s functions, as
well as basic functions of TV sets of JVC and other brands.
(A pg. 56)
● Point the remote control toward the receiving window.
● The maximum operating distance of the remote control is
about 8 m.
ATTENTION:
NOTE:
Press OUTPUT SELECT to stop the blinking and return to the
previous display.
If the remote control doesn’t work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
C DV Button* A pg. 33
* This button will not function during navigation mode or set up mode.
D HDD Button* A pg. 31
* This button will not function during navigation mode or set up mode.
E Number Keys A pg. 56
F Cancel Button (CANCEL) A pg. 30
G F1 Button A pg. 65
H F2 Button A pg. 62, 63
I Top Menu Button (TOP MENU) A pg. 23
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
16
When pressing REC MODE
On-Screen Display (HDD & DVD deck)
When ASUPERIMPOSEB is set to AONB or AAUTOB and
ON SCREEN on the remote control is pressed, various operational
indicators appear on the TV screen. To clear the operational
indicators, press ON SCREEN twice.
(Appears for eight seconds.)
7: 00
10: 00
20: 00
28: 00
36: 00
XP
SP
LP
EP
FR480
When playing back a recorded title
HDD
A Remaining disc time for each recording speed
B Recording speed
0:00
1:00
2:00 01:16:48
FR360
Digital
L – R
When using Live Memory playback
HDD
FISHING WORLD
A Title start
B Current playback point
C Title end
11:00
12:00
13:00
11:35AM
11:33AM
PR.12
FR360
D Elapsed playing time
E Play mode
F Name of title currently being played back
G Time scale (This title is an hour and a half long.)
H Audio mode
DVD
TITLE99 CHAPTER999 T. REMAIN6:59:59
11:35AM
11:33AM
RAM
PR.12
DVD
FR360
TITLE99 CHAPTER999 T. REMAIN6:59:59
Digital
L – R
XP
A Time scale for recording (HDD deck)
Bar meter for recording (DVD deck)
B Current recording point
C Recording mode
FISHING WORLD
A Playback title number
B Playback chapter number
C Disc remaining time
D Current status (playback)
E Audio mode
D Current time
E Current playback channel position number
F Time scale for Live Memory Playback (HDD deck)
Bar meter for Live Memory Playback (DVD deck)
G Current playback point
H Live Memory playback mode
I Current playback time
F Bar meter
G Name of title (or play list) currently being played back
H Current playback point
I Recorded mode*
* Depending on the recording condition, the recorded mode may not
always be displayed.
When recording
HDD
11:00
12:00
13:00
11:35AM
PR.12
FR360
LIVE
DVD
TITLE99 CHAPTER999 T. REMAIN6:59:59
11:35AM
RAM
PR.12
FR360
LIVE
A Recording point
B Current status (recording)
C Current time
D Recording channel number
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
17
On-Screen Display (DV Dubbing)
On-Screen Display (DV deck)
When capturing images from the external DV
When ASUPERIMPOSEB is set to AONB or AAUTOB and
equipment
ON SCREEN on the remote control is pressed, various operational
indicators appear on the TV screen. To clear the operational
indicators, press ON SCREEN again.
0:00
FR360 00:00:00. 00
12bit
1:00
2:00
DV
L – R
SOUND1
HDD
GR-DV3500
00:00:00. 00
H
DV
JVC
GR-DV3500
W
R
A
B
-
L
1
u
S P
G
F
A Recording speed
1 6 B
I
T
U S E C L E A N I N G C A S S E T T E
B HDD capacity graph
C HDD time counter
D Recording time scale
E HDD mode
C
F Remote control mode
G Connected DV equipment mode
W X
:
0 0
:
0 0
:
0 0
D
E
H Connected DV equipment model information
I Input channel
J Sound mode
K Sound input bit-rate*
* Indicates the sound bit-rate of the connected DV equipment
L Connected DV equipment information*
* Maker name and model name, etc. may not appear depending on the
connected equipment.
M Time counter for the connected DV equipment
N Sound monitor mode
A Operation Mode Indicators
B Tape Speed (SP/LP)
C Sound Mode Display A pg. 60
D Current Month/Day/Year/Clock Display/Time Code Display
A pg. 34
E Audio Mode Display A pg. 34
F Warning Message
G Auxiliary Input Indicator (L-1, F-1 or DV)
H ACassette LoadedB Mark
1
2
DV
DV
O Remote control switch
P Auto capture button
Q Sound monitor switch
179 :59 :59
R Elapsed recording time
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR NEW UNIT
EN
18
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
OPERATION CAN BE PERFORMED.
Basic Connections
Connecting to a TV Monitor
Another Recorder
Camcorder
Connect the unit to a TV depending on the TV and cables you use.
8 AV Connection
To connect to a TV with AV connector ^
A Connect the [AUDIO/VIDEO OUTPUT] connectors on the rear
panel of the unit and the TV’s audio/video input connectors with
the supplied Audio/Video cable.
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
To connect to a TV with BNC connector ^
A Connect an optional audio cable between the [AUDIO
OUTPUT] connectors on the rear panel of the unit and the TV’s
audio input connectors.
B Connect an optional BNC video cable between the unit’s BNC
[VIDEO OUTPUT] connector and the TV’s BNC VIDEO input
connector.
Audio/Video
cable
(not supplied)
S-video cable
(not supplied)
To [S-VIDEO
INPUT]
AC outlet
To [AUDIO/VIDEO INPUT]
8 S-Video Connection
To connect to TV’s S-VIDEO input and AUDIO input
connectors ^
To [S-VIDEO
INPUT]
AC power cord
A Connect the unit’s [S-VIDEO OUTPUT] connector to the TV’s
S-VIDEO input connector.
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AUDIO input connectors.
● If your TV is not stereo-capable, use the unit’s [AUDIO
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
Back of unit
To
To
[VIDEO
OUTPUT]
To
[AUDIO/
VIDEO
OUTPUT]
To
[COMPONENT
VIDEO OUT
(Y/PB/PR)]
[S-VIDEO
OUTPUT]
8 Component Video Connection
To connect to TV’s component video input connectors ^
A Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]
connectors to the TV’s component video input connectors.
B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AUDIO input connectors.
Component video
cable
BNC video
cable
(not supplied)
Audio/Video
cable
(supplied)
S-videocable
(not supplied)
(not supplied)
● You can obtain high-quality component video pictures.
● The [COMPONENT VIDEO OUT (Y/PB/PR)] connectors do not
output DV signals.
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
TV
● By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to AScan Mode Set (HDD & DVD Deck
Only)B (A pg. 65).
It’s essential that your unit be properly connected.
Connecting to a DV Device
A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT]
connector on the front panel to the camcorder’s s-video or video
output connector.
ATTENTION:
Connect the AC plug only after all connections to the TV has
been completed.
● Make sure the package contains all of the accessories listed in
ASPECIFICATIONSB (A pg. 86).
● Place the unit on a stable, horizontal surface.
B Connect the unit’s [AUDIO INPUT] connectors on the front
panel to the camcorder’s audio output connectors.
Connecting to Another Recorder
A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT]
connector to another recorder’s s-video or video output
connector.
B Connect the unit’s [AUDIO INPUT] connectors to another
recorder’s audio output connectors.
Plug the end of the AC power cord into an AC outlet.
● APLEASEB and AWAITB blink alternately on the front display
panel when the AC plug of the AC power cord is connected
into an AC outlet. After a short while, A32**B blinks on the
front display panel and starts to count down.
It takes approximately 50 seconds for the unit to be turned
on. This is not a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
19
1 Press SET UP to access the Main Menu screen.
Clock Set
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
ACLOCK SETB, then press G.
MENU BACKGROUND
CLOCK SET
TIME
DATE
YEAR
D.S.T.
--:--
4 Press selection keys to select
ATIMEB, then press ENTER.
Press selection keys to set
the time, then press ENTER.
● Repeat the same procedure to
set the date and year.
1/1 (SUN)
2006
ON
TV
DVD
ENTER
SELECT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
● When you set the time, press
and hold F G to change the time by 30-minute intervals.
● When you set the date, press and hold F G to change the date
by 15-day intervals.
5 Press selection keys to select AD.S.T.B, then press ENTER.
Press selection keys to select the desired setting, then press
ENTER.
ENTER
Selection Keys
ON:
FGDE
Adjustment will be made by the built-in clock itself.
OFF:
Select when Daylight Saving Time does not apply to you.
6 Press SET UP to start the clock operation.
Daylight Saving Time
SET UP
This function enables automatic adjustment of the unit’s clock at
the start and end of Daylight Saving Time.
● With D.S.T. activated, ^
^ on the second Sunday of March at 2:00 AM, the clock is
adjusted to 3:00 AM.
^ on the first Sunday of November at 2:00 AM, the clock is
adjusted to 1:00 AM.
NOTE:
For the year 2006, the Daylight Saving time will end on the last
Sunday of October at 2:00 AM.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
20
On-screen Language Set
This unit offers you the choice to view on-screen messages in 3
different languages.
Language
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press selection keys to select AFUNCTION SET UPB, then
press G.
TV
DVD
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
HDD
ADISPLAY SETB, then press
G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
DVD
AUTO
SUPERIMPOSE
BRIGHT
ON
DIMMER (DURING POWER ON)
DIMMER (DURING POWER OFF)
5 Press selection keys to select
AON SCREEN LANGUAGEB,
then press ENTER.
OFF
QUICK STARTUP
ENGLISH
ON SCREEN LANGUAGE
ENTER
SET UP
EXIT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
6 Press selection keys to select
your desired language, then
press ENTER.
SELECT
ENTER
Selection Keys
FGDE
7 Press SET UP to complete the setting.
Menu/Audio/Subtitle Language Set (DVD deck only)
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
● The procedure shows how to set AMENU LANGUAGEB as an
example.
SET UP
1 Press DVD so that the DVD lamp lights up on the unit.
2 Press SET UP to access the Main Menu screen.
3 Press selection keys to select ADVD VIDEO SET UPB, then
press G.
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
LANGUAGE SET AUDIO OUTPUT DISC PLAY SET UP
INITIAL SET UP
ALANGUAGE SETB, then
press G.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
AMENU LANGUAGEB, then
press ENTER.
ENTER
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
6 Press selection keys to select
your desired language, then
press ENTER.
SELECT
● See ALanguage Code ListB (A pg. 69).
7 Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc’s
default menu language is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
EN
21
1 Press DVD so that the DVD lamp lights up on the unit.
2 Press SET UP to access the Main Menu screen.
Monitor Set
● You cannot set the monitor type during recording or playback.
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
3 Press selection keys to select AFUNCTION SET UPB, then
press G.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
AVIDEO IN/OUTB, then press
G.
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
FRONT AUX F-1
REAR AUX L-1
4:3LB
VIDEO
VIDEO
5 Press selection keys to select
AMONITOR TYPEB, then
press ENTER.
TV
DVD
ENTER
SELECT
SET UP
EXIT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
6 Press selection keys to select
the desired option, then press
ENTER.
DVD
7 Press SET UP to complete the setting.
* The boldface settings below indicate the settings at your purchase.
8 MONITOR TYPE - 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
ENTER
4:3LB (Letter Box conversion):
Selection Keys
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
FGDE
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
SET UP
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image, APan&ScanB (PS) and
ALetter BoxB (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
● The picture will be shown in the A4:3LBB
mode depending on the disc even if the
A4:3PSB mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
22
To play back an MP3/JPEG disc, see APlayback With MP3/WMA/
JPEG NavigationB (A pg. 44).
Basic Playback
1 Load a disc.
● For details, refer to APlacing A DiscB (A pg. 10).
● Pressing I also closes the disc tray.
● Playback begins automatically if an auto-playback DVD disc is
loaded.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
2 Press DV/HDD/DVD on the unit repeatedly or DVD on the
remote control so that the DVD lamp lights up on the unit.
3 Press I to start playback.
● If you load a DVD disc whose region code does not match the
DV/HDD/DVD
discs, the menu display may appear on the TV screen after
play back from the menu. Otherwise, the playback cannot go
forward. Refer to APlayback Control (PBC) FunctionB
(A pg. 26) or ALocating A Desired Scene Using The DVD
MenuB (A pg. 23).
DVD lamp
o
I
W
M
● The Library Database Navigation also enables you to search
and select the desired titles. (A pg. 39)
TV
DVD
4 Press W to pause playback.
● To resume normal playback, press I.
DVD
5 Press o to stop playback.
● When a recordable disc is played, playback stops and AV input
(from external AV source) resumes on the TV screen.
● When a playback-only disc is played, playback stops and the
TV screen becomes all black when you press o. Pressing o
● If M is pressed during playback, playback stops, then the disc
tray opens.
ENTER
NOTES:
● When the Library Database Navigation screen appears, choose
a thumbnail image of the desired title on the TV screen, then
press ENTER. (A pg. 39)
● It is not possible to playback the DVD disc recorded in 96 kHz on
DVD during recording or Live Memory Playback on HDD.
● It is possible to play back on the DV deck and the HDD/DVD deck
simultaneously. However, either DVD or HDD can be played at
the same time.
I
o
W
ATTENTION:
● It takes approximately 30 seconds to read a disc depending on
the type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
● It may take a few seconds to start playback. This is not a
malfunction.
● Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
23
Current playback point
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
Previous
program
or
Scene 2
(Chapter 2)
or
Drama
or
Scene 3
(Chapter 3)
or
Movie
or
Scene 5
(Chapter 5)
or
Next program
or
Scene 4
(Chapter 4)
or
TV
DVD
Track 3
Track 5
Track 4
DVD
Track 2
0-9
Forward
Reverse
● : marked points if any (A pg. 25) or beginning of recording
Variable Speed Search
TOP MENU
ENTER
Selection Keys
FGDE
MENU
S
I
T
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
N/SLOW +
W
O/SLOW
-
o
● To resume normal playback, press I.
For Audio CD
You can perform 4 levels of speed search with N and O. (Audio
is active also during variable speed search.) You cannot perform
slow motion for each direction.
Reverse
O
N
Forward
Locating A Desired Scene Using The DVD Menu
Reverse Search Reverse Reverse Slow Slow Motion Normal Forward Search
4 steps
Play Motion 3 steps
3 steps
Play
4 steps
15 60
–60 –15 –5 –3
–1 –1/2 –1/4 –1/16 1/16 1/4 1/2
1
3
5
DVD VIDEO discs may have top menu and disc menu.
NOTE:
Top menu
Reverse play (–1x) is not possible with Video CD/SVCD discs.
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Still Picture/Frame-By-Frame Playback
Disc menu
Disc menus include playback data (angle menu, subtitle menu,
etc.) specific to each title.
Press MENU to access the disc menu.
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-
frame playback.
● Each press of SLOW – (O) or SLOW + (N) advances/
reverses the still picture frame by frame.
1 Press TOP MENU or MENU to
Example:
access the DVD menu.
2 Press selection keys to select
a desired title, then press
ENTER. Playback starts.
● It may be possible to select the
desired item using the number
keys depending on the menu
display.
● Frame-by-frame playback for reverse direction cannot be
performed with Video CD/SVCD discs.
● To resume normal playback, press I.
Slow Motion
NOTE:
When A7B appears on the TV screen in step 1, the disc does not
1 Press W to pause during playback.
have a top menu or disc menu.
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.
● Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
Locating The Start Point Of The Item Or Skip The Item
● Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
Press S or T during playback.
● Pressing T locates the start point or marked points of the item
or skips the item in the forward direction, then resumes playback.
● Pressing S locates the start point or marked points of the item
or skips the item in the reverse direction, then resumes playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
24
Skip Search
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
● Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
(A pg. 59)
● Resume function always works for DVD-R/DVD-RW discs that
have not been finalized and DVD-RAM regardless of the setting
of ARESUMEB.
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● Skip search cannot be performed when a VCD/SVCD disc is
being played back with the PBC function.
Instant Replay
1 Press o during playback to memorize a resume point.
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorizing.)
You can move back the playback position slightly.
Press w on the remote control or INSTANT REPLAY on the unit.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
● The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 59)
● Performing the following steps would erase the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When ARESUMEB is set to AONB:
● Instant replay cannot be performed when a VCD/SVCD disc is
being played back with the PBC function.
• Press A to turn off the unit.
• Press M to take out the disc.
• Press o in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
Jump Search
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
• Set ARESUMEB to AOFFB. (A pg. 59)
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 59)
during playback (or Live Memory Playback).
• Press o in stop mode.
Press S or T.
• Press TOP MENU to display the top menu, then start playback by
● To advance forward or back, press S or T repeatedly within 5
seconds of each press to continue jump.
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
● Depending on the time from where you want to start jump search,
the first press of S or T will not necessarily lead to a jump of
the selected time interval. The first press will lead to a jump to the
nearest quarter points of an hour (15 min/ 30 min/ 45 min/ 00
min). The subsequent jumps will then be in accordance to the
selected time interval.
● When you cannot advance any further (beginning or end of
program reached), the message AUNABLE TO GO BACK ANY
MOREB or AUNABLE TO GO FORWARD ANY MOREB appears
on the screen. In such a case, press S, O, N, T or o.
2 Press I in stop mode to resume playback. The unit starts
NOTES:
● ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD
and already finalized DVD-R/DVD-RW (video mode) discs. For
other types of discs, the function under AONB setting will be
applied even if ARESUMEB is set to ADISC RESUMEB.
(A pg. 59)
Example:
● If you stop the playback of a disc for which a resume point has
already been memorized, the memory will be updated with the
new resume point.
● After the unit has memorized the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the program. Pressing S or T will result in a
jump to the scene at the 30 minutes point or 45 minutes point
respectively as illustrated below. At the subsequent press, the
scene will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is A15
MINB.
● When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD/SVCDs.
● When ARESUMEB is changed to AONB or AOFFB (A pg. 59),
resume points of the discs memorized with ARESUMEB set to
ADISC RESUMEB will be cleared.
● Resume points are memorized for each side of a double-sided
disc.
● When you switch to HDD while playing back JPEG/MP3 files,
playback stops. The Resume Function doesn’t work when you
switch to DVD thereafter to playback the disc.
Time counter
40 min
0 min
1 h 15 min
15 min
30 min
45 min
1 h
Beginning of program
Current scene
End of program
NOTES:
● Jump search cannot be performed with finalized DVD-R/DVD-RW
(video mode) discs.
● Jump search functions only when chapters (marks) are not set.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
25
Checking The Time Information
TV
DVD
DVD
You can check time information of a disc on the front display panel
and the TV screen.
0-9
8 DVD-RAM/DVD-R/DVD-RW
Each press of DISPLAY on the remote control or the unit changes
the display as follows:
During recording
MARK
Clock time (front display panel only) N Current title elapsed time
N Disc remaining time N (back to the beginning)
ENTER
Selection Keys
FGDE
During playback
MENU
RETURN
T/NEXT
Each title elapsed time N Total remaining time N Remaining time*
N (back to the beginning)
S/PREVIOUS
* only discs before finalizing
I
o
DISPLAY
During recording/playback or in stop mode
Press REC MODE.
● The disc remaining time according to recording modes appears
on the TV screen.
ON SCREEN
REC MODE/REMAIN
AUDIO
SET UP
● It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
SUBTITLE
● In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press selection keys to select AFRB, then
press D E to select the desired recording time. (A pg. 50)
● It is not possible to switch the recording mode during playback or
while recording.
Marking Positions To Play Back Again Later
8 Video CD/SVCD/Audio CD
During playback or in stop mode
Current track elapsed time N Current track remaining time N Total
elapsed time N Total remaining time N (back to the beginning)
It is possible to mark positions (up to 999 points) where you want to
play back once again later, and start playback from a marked
position. Marking onto DVD-RAM/R/RW (VR mode only) discs
when recording is helpful to locate a start point when you play back
the discs later.
NOTES:
● When a PBC-compatible Video CD/SVCD disc is loaded,
deactivate the PBC function. (A pg. 26)
To mark positions:
● For pre-recorded DVD VIDEO, only the title, chapter and elapsed
time are displayed when ON SCREEN is pressed.
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV
screen. You can easily locate the
marked positions using S or T
when you play back the disc.
Angle Selection
To delete the marked positions:
While paused, press S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains Amulti-angleB parts, where the same scene was shot from
different angles.
If the disc contains Amulti-angleB parts, AyB appears on the TV
screen at the beginning of the Amulti-angleB part.
1 Press ANGLE during playback.
The angle selection display
NOTES:
appears on the TV screen.
When 3 scene angles are
● For DVD-R/RW (Video mode) discs, marks are assigned
automatically every 5 minutes.
contained.
2 Press ANGLE or selection
keys to select your desired
● If MARK is pressed when playing back a disc that does not allow
marks to be inserted, A7B appears on the TV screen.
angle.
● Each time you press ANGLE or the selection keys, the angle
changes.
● When A7B appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit
angle selection.
● To clear the angle selection display, press ENTER. In addition,
the angle selection display disappears automatically if no
operation is done for 10 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
26
Subtitle Selection
Audio Language/Sound Selection
Some DVD VIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
AhB appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
Some DVD VIDEO discs contain the multiple audio language or
sound. You can select the desired audio language or sound. For
some Video CD/SVCD discs, you can switch the audio channel to
choose Karaoke either with or without the vocal.
1 Press SUBTITLE during
1 Press AUDIO during playback.
For example: DVD VIDEO
ENGLISH
playback. The subtitle selection
The Audio Language/Sound
ENGLISH
display appears on the TV
screen.
● Each time you press
SUBTITLE, the subtitle display
is switched on and off.
selection display appears.
When 3 subtitle languages are
contained.
2 Press AUDIO or selection
When 3 audio languages are
contained.
keys to select your desired
audio language/sound.
● Each time you press AUDIO or the selection keys, the audio
language/sound changes.
● To clear the Audio Language/Sound selection display, press
ENTER.
2 Press selection keys to select your desired language.
● To clear the subtitle selection display, press ENTER.
NOTES:
● When A7B appears on the TV screen, no subtitle language is
NOTES:
recorded.
● When A7B appears on the TV screen, no other audio language is
recorded.
● When the subtitle language won’t be changed with the procedure
above, change the subtitle on a disc menu displayed by pressing
MENU.
● When the audio language won’t be changed with the procedure
above, change the audio on a disc menu displayed by pressing
MENU.
● Pressing AUDIO to select the audio language/sound is only
possible during playback. It is not possible to select by pressing
language/sound from the setup menu while in stop mode.
Audio Channel Selection
When watching bilingual programs or playing discs on which you
recorded bilingual or stereo programs, you can choose the desired
audio channel.
Playback Control (PBC) Function
● When ASUPERIMPOSEB is set to AONB or AAUTOB, you can
confirm on the TV screen the audio channel you have chosen.
(A pg. 59)
● Each time you press AUDIO, the audio
channel changes.
Some Video CD/SVCD discs support the PBC function. PBC is an
abbreviation of APlay Back ControlB. A Video CD/SVCD disc
recorded with PBC has its own menus, such as a list of the songs
on the disc. You can locate a specific scene by using the menu.
1 Press I in stop mode. The PBC menu appears.
TRACK
USE
2 Press the number keys to enter the number of the desired
scene, then press ENTER. The unit starts playback of the
selected item.
On-Screen Display
For stereo discs
● APBCB appears on the front display panel.
For audio of left channel
For audio of right channel
● When ANEXTB or APREVIOUSB appears on the TV screen:
Pressing NEXT (T) advances to the next page.
Pressing PREVIOUS (S) returns to the previous page.
● You can return to the menu by pressing RETURN.
● The method of the operation is different depending on the disc.
NOTE:
It is not possible for DVD-R/DVD-RW (Video mode) disc playback
to switch the audio channel.
NOTE:
If you want to playback a PBC-compatible Video CD/SVCD disc
without activating the PBC function, start playback with the PBC
function, then press o to stop playback. The TV screen becomes
all black. Then start playback in stop mode by using the number
keys to choose the track, then press ENTER.
program
When the unit is connected with a digital audio device using an
optional optical cable and ADIGITAL AUDIO OUTB is set to
ADOLBY DIGITAL/PCMB, it is not possible to switch the audio
channel of a bilingual program recorded on a DVD-RAM or DVD-R/
RW (VR mode) disc. (A pg. 57) In this case, perform the following
steps using the remote control to switch ADIGITAL AUDIO OUTB
from ADOLBY DIGITAL/PCMB to APCM ONLYB.
A Press SET UP to access the Main Menu screen.
B Press selection keys to select ADVD VIDEO SET UPB, then
press G.
C Press selection keys to select AAUDIO OUTPUTB, then press
G.
D Press selection keys to select ADIGITAL AUDIO OUTB, then
press ENTER.
E Press selection keys to select APCM ONLYB, then press
ENTER. (A pg. 58)
F Press SET UP to complete the setting.
G Press AUDIO to select the desired audio channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
27
B Select this for Repeat Playback. (See below)
C Select this for A-B Repeat Playback. (A pg. 28)
D Select this for search function. (A pg. 28)
Using The On-screen Bar
(A pg. 29)
H Select this to switch picture source type. (A pg. 30)
I Current status area for the selected item.
J Select this for Program Playback. (A pg. 30)
K Select this for Random Playback. (A pg. 30)
The on-screen bar allows you to control various playback
functions. Some of the functions operated on Navigation Menu can
be controlled on the On-screen bar.
ATTENTION:
The on-screen bar can also be used for the HDD deck.
L Select this to control the switching interval of the slide show.
(A pg. 30)
Be sure to clear Library Database Navigation screen by pressing
NAVIGATION.
NOTE:
Although examples of the on-screen bar are provided here only for
3 types of discs, the on-screen bar will be displayed for whichever
disc indicated in the left column.
TV
DVD
Basic Operation On The On-screen Bar
Example: When selecting Picture Control function of DVD
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar. The
item currently selected is highlighted and pointed by :.
NAVIGATION
TITLE 99
DVD-
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
ENTER
Selection Keys
FGDE
VIDEO
RETURN
2 Press selection keys to select A
B, then press ENTER. The
pop-up window appears under the selected item.
TITLE 99 CHAPTER 99 EACH 0:00
3D-ON CINEMA AUTO
ON SCREEN
DVD-
VIDEO
3 Press selection keys to select the desired option, then press
ENTER.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
How To Access The On-screen Bar
1 Press ON SCREEN twice whenever a disc is loaded.
DVD-
VIDEO
NORMAL
CINEMA
SHARP
SOFT
Contents of the on-screen bar during playback
DVD VIDEO
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
To clear the on-screen bar
Press ON SCREEN.
DVD-
VIDEO
NOTE:
See the corresponding pages for details on each menu item.
Repeat Playback
Video CD/SVCD
TRACK 99
EACH 0:00
CINEMA
VCD
You can repeat playback as you like according to the type of disc.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select AxB, then press ENTER. The
pop-up window appears under the selected item.
JPEG disc
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
GROUP 99 TRACK 99
DVD-
5 sec
VIDEO
JPEG
3 Press selection keys repeatedly to select the desired Repeat
mode, then press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
28
DVD-RAM/RW/R
To clear the on-screen bar
Press ON SCREEN.
OFF:
Repeat playback is not performed.
To cancel A-B Repeat Playback
Press selection keys to select AA-B xB, then press ENTER.
ALL REPEAT:
The whole disc is played back repeatedly.
NOTES:
TITLE REPEAT:
● A-B Repeat Playback may not work properly depending on the
type of disc being used.
The current title is played back repeatedly.
● The subtitles recorded around the A-B point may not appear.
● When the end of the item is reached before the end point is set,
the pop-up window disappears from the TV screen. In such a
case, repeat the procedure from step 2.
● The point B must be set at least 3 seconds after the point A.
● When playing back a DVD, A-B Repeat Playback is possible only
within the same title.
● AA-B xB cannot be selected during Program and Random
Playback.
● AA-B xB cannot be selected while stopped.
DVD VIDEO
OFF:
Repeat playback is not performed.
TITLE REPEAT:
The current title is played back repeatedly.
CHAPTER REPEAT:
The current chapter is played back repeatedly.
Audio CD/Video CD/SVCD
OFF:
Repeat playback is not performed.
Locating The Beginning Of A Desired Selection
ALL REPEAT:
The whole disc is played back repeatedly.
TRACK REPEAT:
The current track is played back repeatedly.
You can locate the beginning of a title, chapter, group or track.
During playback or while stopped
JPEG/MP3
OFF:
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select A9B, then press ENTER.
Repeat playback is not performed.
FOLDER REPEAT:
The whole folder is played back repeatedly.
3 Press selection keys to select the desired item, then press
TRACK REPEAT*:
● Skip this step for Video CD/SVCD and Audio CD.
The current track is played back repeatedly.
* ATRACK REPEATB cannot be selected for JPEG discs.
For DVD-RAM/RW/R, DVD VIDEO
ATITLE SEARCHB or ACHAPTER SEARCHB is selectable.
(However, ACHAPTER SEARCHB is not selectable while stopped.)
To clear the on-screen bar
Press ON SCREEN.
To cancel Repeat Playback
Repeat the above procedure from step 1, select AOFFB in step 3,
then press ENTER.
For Video CD/SVCD, Audio CD, JPEG, MP3
ATRACKB is selectable.
NOTE:
NOTES:
Settings that are selectable during playback and stop mode differ
depending on the type of disc and search used.
● Repeat Playback is not possible for a Video CD/SVCD with PBC
function.
GROUP 99
CHAPTER 99
EACH 179:59
● Repeat Playback may not work properly depending on the type of
the disc being used.
● It is possible to use the Mode Lock function. (A pg. 65)
5
CINEMA
DVD-
VIDEO
A-B Repeat Playback
TITLE SEARCH
CHAPTER SEARCH
4 Press the number keys to enter the desired item number, then
press ENTER.
● Playback starts from the selected section.
Examples:
You can repeat the desired part.
During playback
A To select track 5, press the number key A5B.
B To select track 15, press the number key A1B and A5B.
C To select track 25, press the number key A2B and A5B.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select AA-B xB.
3 Press ENTER at the beginning of the desired part you want to
repeat (point A). The elapsed playing time of the point A
appears.
If you have specified a wrong selection
Press RETURN on the remote control and repeat the above
procedures from step 2.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
To clear the on-screen bar
Press ON SCREEN.
DVD-
NOTES:
VIDEO
● When A7B is displayed on the TV screen in step 4, the chapter
you have selected is not contained in the disc, or chapter search
does not work on the disc.
A
1 : 25 : 58
B
:
:
● Before you press ENTER, playback may start automatically when
you enter the section’s number depending on the disc.
● This function is not possible for a Video CD/SVCD with PBC
function.
4 Press ENTER at the end of the desired part you want to repeat
(point B). The elapsed playing time of the point B appears.
● The selected part of the disc (between point A and B) is played
repeatedly.
TITLE 99
CHAPTER 99
EACH 0:00
3D-ON CINEMA AUTO
DVD-
VIDEO
A
1 : 25 : 58
B
1 : 40 : 00
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
29
Simulated Surround Effect
TV
DVD
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
0-9
1 Press ON SCREEN twice to access the on-screen bar.
CANCEL
2 Press selection keys to select A
B, then press ENTER.
3 Press selection keys to select AONB, then press ENTER.
● A3D-ONB appears above the selected item and Simulated
Surround Effect is activated.
ENTER
Selection Keys
FGDE
RETURN
T
TITLE 99
CHAPTER 99
EACH 0:00
S
CINEMA AUTO
DVD-
I
VIDEO
CLEAR
OFF
ON
ON SCREEN
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press selection keys to select AOFFB, then press ENTER to clear
A3D-ONB from the screen.
Time Search
NOTES:
back a title recorded in multichannels.
● Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUTPUT] connectors.
● When Simulated Surround Effect is activated, the settings of
AANALOG AUDIO OUTB and AD. RANGE CONTROLB are
disabled. (A pg. 58)
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/
SVCD and Audio CD).
● Simulated Surround Effect cannot be activated under the
following conditions:
● When the HDD deck is in the recording mode.
● When a disc containing both the Dolby Digital 5.1CH and 2CH
sound formats is playing back a scene that is not in the 5.1CH
sound format.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select Aj9B, then press ENTER.
The pop-up window appears under the selected item.
TITLE 99
CHAPTER 99
EACH 0:00
CINEMA AUTO
DVD-
VIDEO
Adjusting The Picture Quality
3 Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
You can obtain optimal picture quality by selecting an appropriate
picture mode.
To play back from a point 12 (minutes): 50 (seconds) elapsed.
1 Press ON SCREEN twice to access the on-screen bar.
TIME
TIME
TIME
TIME
TIME
2 Press selection keys to select A
B, then press ENTER. The
Press 1
Press 5
Press 2
Press 0
pop-up window appears under the selected item.
TITLE 99 CHAPTER 99 EACH 0:00
CINEMA AUTO
DVD-
VIDEO
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2.
3 Press selection keys to select the desired option, then press
ENTER.
To clear the on-screen bar
Press ON SCREEN.
NORMAL:
Normally select this option.
NOTES:
CINEMA:
● When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
However, for HDD; DVD-R/RW (Video mode) discs that have not
been finalized; and DVD-R/RW (VR mode) discs, A7B will not be
displayed and the last image (still) of the program appears on the
TV screen.
Suitable for a movie disc, etc.
SHARP:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-colored surfaces such as cartoons.
SOFT:
Select this option when too much noise appears.
● Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
● This function is not possible for a Video CD/SVCD with PBC
function.
To clear the on-screen bar
Press ON SCREEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DVD DECK
EN
30
4 Press I. Playback starts in the programmed order.
● When all of the programmed tracks have been played back,
Program Playback stops, but the programmed information
remains.
Setting The Progressive Mode
● To add tracks to the end of the program, perform step 3.
● During Program Playback, pressing T skips to the next
selection of the program. Pressing S returns to the beginning
of the current selection.
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1 Set the unit to the progressive scan mode. (A pg. 65)
2 Press ON SCREEN twice to access the on-screen bar.
To clear the on-screen bar and the contents of the program
Press ON SCREEN.
To cancel Program Playback
Press selection keys to select APRGMB, then press ENTER.
3 Press selection keys to select A
B, then press ENTER. The
pop-up window appears under the selected item.
TITLE 99 CHAPTER 99 EACH 0:00
3D-ON
NOTE:
Program Playback is not possible depending on the type of disc.
AUTO
CINEMA
DVD-
Random Playback
VIDEO
4 Press selection keys to select the desired option, then press
ENTER.
You can play back all the tracks on the disc in random order.
While stopped
AUTO:
This mode automatically detects film and video content for
progressive playback. When film content is found, flag detection
is used to invoke playback of film data in full screen. When
video content is found, pictures from multiple fields are used to
detect sections with movement, and then this movement
undergoes advanced image processing for output of sharp,
detailed progressive images without any reduction in image
quality where movement occurs. Normally, operation in this
mode is recommended.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select ARNDB, then press ENTER.
3 Press selection keys to select AONB, then press ENTER.
Playback starts in random order.
TRACK 99
EACH 0:00
CINEMA
VCD
FILM:
Suitable for playing back a progressive scanned film source
disc.
OFF
ON
VIDEO:
To clear the on-screen bar
Press ON SCREEN.
Suitable for playing back a video source disc. The outlines on
the played back pictures will be soft.
To cancel Random Playback
Press selection keys to select AOFFB, then press ENTER.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
NOTE:
The same track will not be played back more than once during
Random Playback.
Progressive scan is output only from [COMPONENT VIDEO OUT]
connectors.
Select The Switching Interval Of The Slide Show
Program Playback
You can control the switching interval of the slide show.
You can program up to 30 tracks (Video CD/SVCD or Audio CD) to
play back in the desired order.
1 Press ON SCREEN twice to access the on-screen bar.
While stopped
2 Press selection keys to select A
B, then press ENTER. The
pop-up window appears under the selected item.
1 Press ON SCREEN twice to access the on-screen bar.
GROUP 99 TRACK 99
2 Press selection keys to select APRGMB, then press ENTER.
The program table appears under on-screen bar.
5 sec
JPEG
TRACK 99
EACH 0:00
CINEMA
VCD
3 Press selection keys to select the desired option, then press
ENTER.
● Each time you press the selection keys, the interval changes
as follows:
5 sec Y 10 sec Y 15 sec Y 20 sec Y 25 sec Y 30 sec Y
(Back to the beginning)
3 Press the number keys to
enter the track numbers in the
desired order.
USE [0-9] KEYS TO SELECT TRACK
Examples:
A To select track 5, press the
number key A5B and ENTER.
B To select track 15, press the
number key A1B and A5B.
To clear the on-screen bar
Press ON SCREEN.
PROGRAM TOTAL TIME
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
C To select track 25, press the number key A2B and A5B.
If you have specified a wrong selection
Press CANCEL. The last selection is erased.
Or press CLEAR (o). The whole selection is erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
31
Basic Playback
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD so that the HDD lamp lights up on the unit.
DV/HDD/DVD
TV
DVD
HDD
o
I
W
MARK
TV
DVD
HDD
I
S
T
O/SLOW
-
N/SLOW +
W
o
v
w
ON SCREEN
ENTER
I
W
o
DISPLAY
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press I.
Reverse
O
N
Forward
ATTENTION:
● It may take a few seconds to start playback. This is not a
malfunction.
Reverse Search
5 steps
Reverse Reverse SlowMotion Normal
Forward Search
6 steps
Play SlowMotion
3 steps
3 steps
Play
● Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.
–360 –60 –15 –5 –3
–1
–1/2 –1/4 –1/16 1/16 1/4 1/2
1
1.5
3
5
15 60 360
1 Press DV/HDD/DVD on the unit repeatedly or HDD on the
remote so that the HDD lamp lights up on the unit.
Still Picture/Frame-By-Frame Playback
2 Press I to start playback.
● The Library Database Navigation also enables you to search
and select the desired programs. (A pg. 39)
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-
frame playback.
● To resume normal playback, press I.
● Each press of SLOW – (O) or SLOW + (N) advances/
reverses the still picture frame by frame.
● To resume normal playback, press I.
4 Press o to stop playback.
NOTES:
● When the Library Database Navigation screen appears, choose
a thumbnail image of the desired title on the TV screen, then
press ENTER. (A pg. 39)
Slow Motion
1 Press W to pause during playback.
● During HDD playback, the current title elapsed time is displayed
on the TV screen when ON SCREEN is pressed. However, each
press of DISPLAY changes the time display on the front display
panel as follows:
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.
● Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
Current title elapsed time N Disc remaining time N Current title
remaining time N (back to the beginning)
● It is possible to play back on the DV deck and the HDD/DVD deck
simultaneously. However, either DVD or HDD can be played at
the same time.
Skip Search
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON HDD DECK
EN
32
Instant Replay
You can move back the playback position slightly.
Press w on the remote control or INSTANT REPLAY on the unit.
● Each press skips back for approximately 7 seconds and resumes
playback.
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want to
play back once again later, and start playback from a marked
position. Marking onto the disc when recording is helpful to locate
a start point when you play back the disc later.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
To mark positions:
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV
screen. You can easily locate the
marked positions using S or T
when you play back the disc.
1.5x Speed Playback
You can play back a title quickly. The sound will also be played
back faster than normal speed during 1.5x speed playback.
1.5x speed playback cannot be performed during recording on
HDD or DVD.
To delete the marked positions:
While paused, press S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
1 Press O to locate the point to start 1.5x speed playback from.
2 Press I to resume playback.
3 Press N once.
● Pressing ON SCREEN displays AX1.5B on the top right corner
of the screen.
NOTES:
● When the unit is connected with a digital audio device using an
optional optical cable, set ADIGITAL AUDIO OUTB to APCM
ONLYB. (A pg. 26)
● For programs recorded in DV mode, 1.5x speed playback with
sound is not possible.
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 59)
during playback (or Live Memory Playback).
Press S or T.
● To advance forward or back, press S or T repeatedly within 5
seconds of each press to continue jump.
● Depending on the time from where you want to start jump search,
the first press of S or T will not necessarily lead to a jump of
the selected time interval. The first press will lead to a jump to the
nearest quarter points of an hour (15 min/ 30 min/ 45 min/ 00
min). The subsequent jumps will then be in accordance to the
selected time interval.
● When you cannot advance any further (beginning or end of
program reached), the message AUNABLE TO GO BACK ANY
MOREB or AUNABLE TO GO FORWARD ANY MOREB appears
on the screen. In such a case, press S, O, N, T or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the program. Pressing S or T will result in a
jump to the scene at the 30 minutes point or 45 minutes point
respectively as illustrated below. At the subsequent press, the
scene will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is A15
MINB.
Time counter
40 min
0 min
1 h 15 min
30 min
15 min
45 min
1 h
Beginning of program
Current scene
End of program
NOTE:
Jump search functions only when chapters (marks) are not set.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DV DECK
EN
33
1 Load a cassette. Make sure the window side is up, the rear
label side is facing you and the arrow on the front of the
cassette is pointed toward the unit.
Basic Playback
● Do not apply too much pressure when inserting.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● If the erase protection switch is set to ASAVEB, playback begins
automatically. It takes about 15 seconds until the playback
picture appears.
● The unit’s power comes on automatically.
2 Press DV/HDD/DVD on the unit repeatedly or DV on the remote
DV lamp
DV/HDD/DVD
I
control so that the DV lamp lights up on the unit.
3 Find the program start point. If the tape is advanced past the
start point, press O. To go forward, press N.
4 Press I to start playback.
5 Press o to stop playback.
● To eject the cassette, press M (DV). You can also eject the
cassette when the unit is turned off.
N
O
o
M
Clean the video heads using a dry cleaning cassette
- M-DV12CL - when:
● No picture during playback.
TV
DVD
● Block noise appears during playback.
● AUSE CLEANING CASSETTEB appears on the screen.
● AU01B lights on the front display panel.
DV
NOTES:
● The heads get dirty in the following cases:
● in an environment prone to extreme temperature or humidity
● in a dusty environment
● flaw, dirt or mould on video tapes
● continuous usage for a long time
● AU01B will also light on the front display panel when you
attempt to play back a tape recorded with PAL signals. This unit
cannot play back tapes recorded with PAL signals.
I
Usable cassettes
● Cassettes marked P can be used with the DV deck.
● Tapes recorded in the DVCAM format can be played.
O
o
N
NOTES:
● When you record a tape on the DV deck with the recording speed
set to ALPB, it is recommended to play back that tape back on this
DV deck. Digital video recorder from other manufacturers may not
be able to play back the tape properly.
● It is possible to play back on the DV deck and the HDD/DVD deck
simultaneously. However, either DVD or HDD can be played at
the same time.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, set its
erase protection switch to ASAVEB. To record on it later, set the
switch to ARECB.
Erase protection switch
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS ON DV DECK
EN
34
Skip Search
Playback Features
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly or DV on the
remote so that the DV lamp lights up on the unit.
Instant Replay
During playback, press
w
on the remote control or
INSTANT REPLAY on the unit. The unit rewinds the picture a little
(about 7 seconds) and resumes playback.
Next Function Memory
TV
DVD
The Next Function Memory AtellsB the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
DV
For Automatic Start Of Playback
Press O, then press I within 2 seconds.
For Automatic Cassette Ejection After Tape Rewind
Press O, then press M (DV) within 2 seconds.
Soundtrack Selection
Your unit is capable of recording two soundtracks (L and R) and will
play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
I
O
N
TRACK
W
USE
On-Screen Display
DISPLAY
AUDIO
L W X R
Both sounds on the left channel and
the right channel are mixed and played
back
L W
Sound on the left channel is played
back
X R
Sound on the right channel is played
back
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode, a slight mosaic effect appears on screen.
To select the audio mode (SOUND1/SOUND2/MIX), refer to
AAUDIO MODEB under ADV SET UPB (A pg. 60).
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press I.
Time Code
During recording, a time code is recorded on the tape. This time
code is used to confirm the position on the tape when playing back
or editing a tape.
1 Press DISPLAY on the remote control or the unit until the time
code on the tape appears on the front display panel and the TV
screen.
Reverse
O
N
Forward
● Each time you press DISPLAY, the indication changes as
follows:
Reverse Search
3 steps
Reverse Slow Motion
Normal
Play
Forward Search
3 steps
Time code N Tape remaining time N Clock time N (Back to the
beginning)
Slow Motion
1 step
1 step
–12
–4
–2
–1/5
1/5
1
2
4
12
Still Picture/Frame-By-Frame Playback
1 Press W to pause during playback.
2 Press W to activate frame-by-frame playback.
● To resume normal playback, press I.
Slow Motion
1 Press W to pause during playback.
2 Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
● Press N for forward slow motion or O for reverse slow
motion.
● To resume normal playback, press I.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
35
Recording/playback Status Display
Live Memory Playback
TV
DVD
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly to select the HDD
or DVD deck.
NAVIGATION
Press NAVIGATION to display Library Database
Navigation menu, then choose a program to play
back. (A pg. 38)
This unit records pictures onto the hard disk and DVD-RAM disc,
instead of video tapes, then plays back the pictures recorded on
the disc. This makes it possible to achieve high-speed writing and
read-out that has not been possible with conventional VCRs,
enabling recording and playback simultaneously.
R
o
ON SCREEN
High-speed spin
Live Memory Playback status can be checked by
pressing ON SCREEN to display the bar meter on
the superimpose display. The current status is
Recording
(High-speed writing)
Playback
(High-speed read-out)
superimposed on the TV screen. (A pg. 16, AWhen
using Live Memory playbackB)
EE CHECK
EE
It is called ALive Memory PlaybackB to start playback of the
program being recorded, with a time-lag between a recording point
and a playback point, as shown in the figure below.
NOTES:
● Live Memory Playback could be performed approximately 30
seconds after recording has started on the DVD-RAM disc.
However, for HDD, Live Memory Playback is possible right after
recording has started.
Current playback point
(Live Memory Playback)
● Although high-speed search up to approximately 30 seconds
before the current recording point is possible during Live Memory
Playback, once the current recording point is reached, the unit
30 seconds so that recording and playback can continue.
● Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.
● Live Memory Playback cannot be performed while recording the
source from DV input. (A pg. 49, ADV Dubbing (HDD & DVD
Deck Only)B)
● When EE CHECK is pressed to display the picture currently
being recorded, the picture size may not be correct.
● Press o or EE to stop Live Memory Playback.
● Live Memory Playback cannot be performed while the DVD deck
is recording as temporary recording on HDD stops during
recording on DVD.
Current recording position
Recording start point
(Recording point)
Recording
continues
Playback
continues
0
1 hour
30 min.
Currently elapsed recording time
Not only can this unit play back a program previously recorded
while recording another program, but the unit also allows you to
play back from the beginning of a program while continuing to
record the same program.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
36
E N
Buttons To Be Used During Live Memory Playback
● Each press of the button during playback advances the
playback speed in 5 steps in the forward direction.
Available only when paused
● Each press of the button advances the still picture frame by
frame.
● Pressing down for 2 or more seconds advances playback at
1/16 times the normal speed. Then, each press of the button
advances slow-motion at 1/16 times, 1/4 times and 1/2 times
the normal playback.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD or DVD to select the desired deck for Live Memory
Playback.
F o
TV
DVD
● Pressing once during Live Memory Playback or RetroActive
Recording returns to the external input screen.
● Pressing twice during recording stops recording and returns to
the external input screen.
HDD
DVD
G W
● Pressing once pauses playback (still picture playback).
● Pressing repeatedly advances the still picture frame by frame.
H w
It is useful when watching sports programs, etc.
● Each press skips back for approximately 7 seconds and
resumes playback.
A
● Pressing repeatedly skips back for approximately 7 seconds
continuously as many times as pressed.
I v
It is useful when skipping over unwanted sections.
● Pressing once skips forward for approximately 30 seconds and
resumes playback.
B
C
D
F
E
G
I
K
H
J
● Pressing repeatedly skips forward continuously as many times
as pressed.
J EE
Returns to on external input screen. When a confirmation
message appears by pressing this button during title editing,
etc., follow the instruction to return to the previous screen.
K EE CHECK
You can check, for example, if the program you are recording
has already finished.
● Pressing once displays the picture currently being recorded and
the one being played back simultaneously.
● Pressing successively clears the Live Check window and
displays only the picture currently being played back.
A NAVIGATION
Displays Library Database Navigation menu. You can choose a
title to play back.
B S
● Pressing once skips back to the beginning of the chapter being
played back.
● Pressing down for 2 or more seconds during playback reverses
playback at 5 times the normal speed while pressed. Releasing
the button resumes normal playback.
Available only when paused
times the normal speed. Releasing the button resumes normal
playback.
Backward Jump
● Each press of the button during Live Memory Playback jumps
back for the selected time interval and resumes playback.
(A pg. 32, AJump SearchB)
C T
● Pressing once skips forward to the beginning of the next
chapter being played back.
● Pressing down for 2 or more seconds during playback
advances playback at 5 times the normal speed while pressed.
Releasing the button resumes normal playback.
Available only when paused
16 times the normal speed. Releasing the button resumes
normal playback.
Forward Jump
● Each press of the button during Live Memory Playback jumps
forward for the selected time interval and resumes playback.
(A pg. 32, AJump SearchB)
D O
● Each press of the button during playback advances the
playback speed in 6 steps in the reverse direction.
Available only when paused
● Each press of the button reverses the still picture frame by
frame.
● Pressing down for 2 or more seconds reverses playback at 1/16
times the normal speed. Then, each press of the button
reverses slow-motion at 1/16 times, 1/4 times and 1/2 times the
normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
EN
37
Temporary recording for Live Memory (HDD deck only) Simultaneous Recording and Playback
This unit automatically records the AV input being received, within
the specified range of time, to the reserved space on the hard disk.
The time range can be set for 30 minutes, 1 hour, and 3 hours.
(A pg. 59)
You can play back the previous part of the AV input you are
recording or other programs available in the Library Database.
1 Press NAVIGATION. The Library Database Navigation screen
appears.
NOTE:
Previous temporary recordings will be overwritten since the unit is
always recording the AV input being received. Thus, it is not
possible to play back programs recorded beyond the specified
range of time since they are already overwritten. To avoid this in
order to save titles, perform normal recording or RetroActive
Recording (See below).
ENTER.
3 Press selection keys to select the desired title, then press
ENTER.
● For DVD-RAM, playback starts from the beginning of the title if
ACONTINUOUS PLAYB in ADVD SET UPB is set to AONB
(A pg. 59).
About limitation on temporary recording
The temporary recording for Live Memory is canceled in the
following cases, and will start all over again when it is to resume.
● When the power is turned off
4 Press selection keys to select the desired playback method
(ABEGINNINGB, ARESUMEB or AREPEATB), then press
● Playback of the selected title begins automatically.
occurred
5 Press o to stop playback.
● The external input screen resumes.
● When normal recording or RetroActive Recording is performed
● When the ALIVE MEMORYB setting is changed (A pg. 59)
● When dubbing is performed by pressing DUBBING (A pg. 45)
● When ADVB is selected by pressing INPUT SELECT +/–
(A pg. 49)
NOTES:
● You can use various playback features during Live Memory
Playback.
screen resumes. To stop actual recording, press o twice again.
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the AV input you
are currently watching (temporarily recorded on the background).
(See ATemporary recording for Live Memory (HDD deck only)B
above.)
Instant Replay
You can move back the playback position slightly during recording
or Live Memory Playback.
Press w on the remote control or INSTANT REPLAY on the unit.
8 DVD-RAM
1 Press S or O to locate the point to start recording from.
● Pressing once during recording skips back for approximately 30
seconds and starts Live Memory Playback. While pressing once
during Live Memory Playback skips back for approximately 7
seconds and resumes playback.
● Each press of O increases the reverse search speed.
2 Press R on the unit to start RetroActive Recording. Or while
holding R, press I on the remote control.
● Each subsequent press skips back for approximately 7 seconds
and resumes playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
3 Press o twice to stop RetroActive Recording.
● The external input screen resumes.
NOTES:
● You cannot use RetroActive Recording for inputs other than the
one you are currently watching.
8 HDD
● Pressing during recording skips back for approximately 7
seconds and starts Live Memory Playback. While pressing during
Live Memory Playback skips back for approximately 7 seconds
and resumes playback.
● Recording speed is automatically set to FR65 mode when
RetroActive Recording is started.
● Temporarily recorded data prior to the beginning of RetroActive
Recording is erased when RetroActive Recording started.
● Each press skips back for approximately 7 seconds and resumes
playback.
● Pressing while paused skips back for approximately 7 seconds
and resumes pause.
Resuming Playback (HDD deck only)
You can resume playback of an AV input you were recording or
watching from the point you have paused.
1 Press W to pause an AV input.
● Recording continues when recording.
2 Press I to start Live Memory Playback.
● Playback resumes from the paused position.
3 Press o to resume the external input screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
38
Using Library Database Navigation system, you can easily modify
registered information, edit the title or play list, as well as search for
the beginning of each title.
Library Database Navigation
About registration of information
The following information is automatically registered for each title
when ordinary recording is performed, then stored in an area
specified on the unit.
● index* (reduced pictures to show program titles)
● program title*
● category*
● date and time
● channel
● recording mode
The Library Database Navigation enables you to search and select
the desired titles recorded on the HDD deck and the DVD deck
very easily.
You can record up to 99 titles on a disc.
Each time a title is recorded, the information of the title is
registered for the Library Database Navigation automatically.
So, you can confirm the information of the titles recorded with the
Library Database Navigation screen. And, you can also select one
of the titles recorded using the Library Database Navigation.
The following screen appears as the Library Database Navigation
screen when you press NAVIGATION. You can move the arrow to
select the desired position on the screen by pressing selection
keys on the remote control.
● length of recording time
The items marked with an asterisk (*) can be easily modified and
registered again after recording by using Library Database
Navigation system.
The limitations of registration
You can register information up to 99 titles for the DVD deck and
500 titles for the HDD deck.
When the amount of information is at the limits of registration, you
cannot record new titles any more. In this case, you need to delete
old titles to register new ones. (A pg. 40)
NAVIGATION > ORIGINAL
0026 [FISH WORLD
12/25/03 THU 10:00AM - 10:15AM
FROG WORLD
]
143 MIN
L-1
EP
A
B
D
E
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
TO EXIT
NOTES:
● Once a DVD-R/RW (Video mode) disc has been finalized, the
display for original does not appear. Only display for library
appears.
ENTER
NAVIGATION
EXIT
SELECT
C
F
G
● When a copy-once title recorded on the HDD is dubbed to a DVD
disc (DVD-RAM/R/RW (VR mode)), the original data will be
moved from the HDD to the DVD disc. In additional, the title that
was moved to the DVD disc will become a copy-protected title,
A Playback screen
(Indicates currently received AV input.)
B Guidance for operations
C Scroll bar
(Appears when there are over nine registered titles (or play
lists). The scroll bar only indicates that there are more titles (or
play lists) hidden off the current screen display. To show hidden
titles (or play lists), press selection keys repeatedly.)
D Recording information for the title indicated by the arrow
E Index list
and the icon changes from
to
.
● Sound of received channel may be interrupted while the Library
Database Navigation screen is displayed.
● The order of index which are displayed by pressing DUBBING
differs from the images displayed by pressing NAVIGATION or
EDIT.
(Thumbnail still of each title)
Thumbnail still is not to be played back.
F Index
: Indicates no index is registered.
: Indicates no title is registered.
G Icons
(Indicate the record condition of each title.)
The Icons and their meanings
This title is write-protected.
This title has not been played back.
This title is copy-protected.
NEW
This title can only be recorded once (copy-once title).
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
39
Scan For Beginning Of Title
Edit Original Information
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to scan.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to modify.
TV
DVD
HDD
DVD
ATTENTION:
It is not possible to modify discs recorded on DVD units from
other manufacturers.
MEMO
EDIT
CANCEL
ENTER
Modify Index
1 Press EDIT. The Editing screen appears.
NAVIGATION
2 (DVD deck only) Press selection keys to select AMODIFYB
Selection Keys
FGDE
under AORIGINAL/PLAY LISTB, then press ENTER.
RETURN
I
N
3 Press selection keys to select AMODIFYB under AORIGINALB,
then press ENTER.
O
o
4 Press selection keys to select a title you want to modify, then
W
press ENTER.
5 Press selection keys to select AINDEXB, then press ENTER.
6 Press I to start playback. Press O or N to search for the
picture from the title, then press W.
● The pictures of the title appear
on the left window.
EDITING > MODIFY INDEX
12/25/03 THU 10:00AM - 10:15AM
FROG WORLD
L-1
SP
INDEX
7 Confirm the arrow is on
AREPLACEB, then press
ENTER to register new index.
New index appears on the
right window.
● When you press ENTER with
can return to the previous screen.
You can scan the beginning of the title easily with the Library
Database Navigation.
PROG.
1
0 : 01 : 03
SELECT IMAGE TO REPLACE WITH
ON REMOTE
RETURN
1 Press NAVIGATION. The Library Database Navigation screen
REPLACE
appears.
2 Press selection keys to select AORIGINALB, then press
ENTER.
3 Press selection keys to select
8 Press EDIT to return to the normal screen.
NAVIGATION > ORIGINAL
the index (small pictures) of
0026 [FISH WORLD
12/25/03 THU 10:00AM - 10:15AM
FROG WORLD
]
143 MIN
L-1
EP
the desired title, then press
ENTER.
● When you want the plural titles
to be played back
continuously, press MEMO
after selecting the desired title.
The numbers of the playback
order appear on the index. You can select up to 8 titles.
● When you want to correct the order, move the arrow to the
desired index and press MEMO. The number disappears and
the unit re-numbers the other programs automatically.
● When you want to cancel the order, press CANCEL.
Modify Title Name
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
TO EXIT
1 Perform steps 1 – 4 of AModify IndexB above before continuing.
2 Press selection keys to select ANAMEB, then press ENTER.
3 Press selection keys to select
NAVIGATION
EXIT
ENTER
SELECT
A
BC EDITING > MODIFY NAME
0026 [FISH WORLD
]
64 MIN
L-1
XP
the desired letter or symbol,
then press ENTER. Repeat
this process to complete the
name.
12/25/03 THU 10:00AM - 10:15AM
FROG WORLD
F ROG
W
OR L D
SELECT WITH @
THEN PRESS [ENTER]
A
G
M
S
B
H
N
T
C
I
D
J
E
K
F
L
R
X
a
g
b
h
n
t
c
i
d
j
e
k
f
l
1
2
5
8
+
/
3
4
7
0
*
6
9
-
PRESS [EDIT]
TO EXIT
O
U
P
V
Q
W
m
s
o
u
p
v
q
w
r
x
● To correct a letter, press
selection keys to select
ADELETEB, then press
ENTER.
Y
Z
y
z
=
!
'
"
#
)
$
,
%
.
&
:
;
\
<
]
>
^
?
_
@
`
[
{
|
}
~
(
ENTER
EDIT
EXIT
SAVE
DELETE
CANCEL
SELECT
4 Press selection keys to select
NAVIGATION > ORIGINAL
ABEGINNINGB, then press
12/25/03 THU
10:00AM - 10:15AM
FROG WORLD
SP
● You can enter the letters up to 64.
L-1
ENTER.
SELECT WITH @
THEN PRESS [ENTER]
4 Press selection keys to select ASAVEB, then press ENTER.
5 Press EDIT to return to the normal screen.
● To resume playback from the
point where playback was
previously stopped, press
selection keys to select
ARESUMEB, then press
ENTER.
SELECT HOW TO PLAY BACK
BEGINNING RESUME REPEAT
PRESS [NAVIGATION]
TO EXIT
NAVIGATION
ENTER
EXIT
SELECT
● To repeat playback of a selected title, press selection keys to
select AREPEATB, then press ENTER.
5 Press W to pause playback.
● To resume normal playback, press I.
6 Press o to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
40
Modify Category
Delete Unwanted Part Of The Title
(HDD, DVD-RAM & DVD-R/RW (VR mode) only)
You can delete unwanted part of the title.
1 Perform steps 1 – 4 of AModify IndexB (A pg. 39) before
continuing.
2 Press selection keys to select ACATEGORYB, then press
1 Perform steps 1 – 2 of AModify IndexB (A pg. 39) before
ENTER.
continuing.
3 Press selection keys to select
2 Press selection keys to select ADEL SCENB, then press
EDITING > MODIFY CATEGORY
0026 [FISH WORLD
]
64 MIN
L-1
XP
the desired category, then
ENTER.
12/25/03 THU 10:00AM - 10:15AM
FROG WORLD
press ENTER.
3 Press selection keys to select a title whose unwanted part you
want to delete, then press ENTER.
MOVIES
MUSIC
DRAMA
SELECT WITH @
THEN PRESS [ENTER]
4 Press EDIT to return to the
ANIMATION
NEWS
SPORTS
DOCUMENTARY
EDUCATION
PRESS [EDIT]
TO EXIT
normal screen.
WEATHER
4 Press I to start playback. Press O or N to find the point
where you want the deletion to begin, then press W.
EDIT
EXIT
ENTER
HOBBY
ENTERTAINMENT ART
SELECT
5 Confirm the arrow is on AINB,
EDITING > ORIGINAL/DEL SCENE
12/21/03 SUN 6:30PM - 8:00PM
RALLY CAR
L-1
IN
0 : 05 :15
then press ENTER.
SP
Protect Title
(DVD-RAM & DVD-R/RW (VR mode) only)
6 Press I to start playback.
Press O or N to find the
point where you want the
OUT
0 : 06 :15
PROG.
1
0 : 01 : 03
You can protect titles to prevent accidental erasure of the important
titles.
deletion to end, then press W.
SELECT SCENE TO DELETE WITH
ON REMOTE
IN OUT
PREVIEW
OK
7 Press selection keys to select
AOUTB, then press ENTER.
● Select APREVIEWB, then
1 Perform steps 1 – 2 of AModify IndexB (A pg. 39) before
continuing.
press ENTER to preview the edited title.
ENTER.
8 Press selection keys to select AOKB, then press ENTER.
● If you do not want to delete the scene, press RETURN.
3 Press selection keys to select a title you want to protect, then
press ENTER.
To modify the points
A Press RETURN.
B Repeat steps 4 – 8 as necessary.
4 Press selection keys to select APROTECTB, then press
ENTER. A
B appears.
● To cancel the protection, repeat 3 – 4 again. In step 4, select
9 Press selection keys to select ADELETEB, then press ENTER.
ACANCEL PROTECTB, then press ENTER.
The selected scene is deleted.
● To cancel the deletion, press selection keys to select
ACANCELB, then press ENTER.
5 Press EDIT to return to the normal screen.
NOTE:
10Press EDIT to return to the normal screen.
All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles.
NOTES:
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
● Available recording capacity may not match the deleted part after
deletion.
● For DVD-R discs, although it is possible to delete unwanted part
of a title, available recording capacity does not increase.
Delete Title
You cannot record any more with Library Database Navigation
once the registered titles on the disc reach 99 titles for the DVD
deck and 500 titles for the HDD deck. Deleting unnecessary titles
after dubbing or other operations can increase remaining time and
available recording capacity. (For DVD-R discs, although it is
possible to delete recorded titles, available recording capacity does
not increase.) The deleted title is never resumed. Play lists and title
information in the unit’s library are also deleted.
1 Press EDIT. The Editing screen appears.
2 (DVD deck only) Press selection keys to select AMODIFYB
under AORIGINAL/PLAY LISTB, then press ENTER.
3 Press selection keys to select ADELETEB under AORIGINALB,
then press ENTER.
4 Press selection keys to select a title you want to delete, then
press ENTER.
5 Press selection keys to select ADELETEB, then press ENTER.
● When you cancel the deletion, select ACANCELB, then press
ENTER.
6 Press EDIT to return to the normal screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
41
Divide Title (HDD deck only)
You can divide titles that are recorded continuously.
Edit Play List Information
1 Press EDIT. The Editing screen appears.
2 Press selection keys to select ADIVIDEB, then press ENTER.
3 Press selection keys to select a title to divide, then press
ENTER.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
● Load a DVD disc to modify.
4 Press I to start playback. Press O or N to locate a point to
divide, then press W.
5 Confirm the arrow is on ADIVIDEB, then press ENTER.
● The first picture (start) of the newly created title appears in the
bottom right window.
● Select APREVIEWB, then press ENTER. The first several
seconds of the newly created title is played back, then the
playback pauses at the dividing point.
ATTENTION:
It is not possible to modify discs recorded on DVD units from
other manufacturers.
● To undo the division, press selection keys to select ARETRYB,
then press ENTER. Repeat the above procedure to locate
another point to divide.
TV
DVD
6 Press selection keys to select AOKB, then press ENTER.
HDD
DVD
7 Press selection keys to select ADIVIDEB, then press ENTER.
● Select ACANCELB, then press ENTER to return to the previous
screen.
8 Press EDIT to return to the normal screen.
CANCEL
ENTER
NOTES:
MEMO
EDIT
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
NAVIGATION
Selection Keys
DFGE
Modify Chapter
(HDD, DVD-RAM & DVD-R/RW (VR mode) only)
You can create and delete chapter marks in titles.
T
I
S
O
N
W
o
1 Perform steps 1 – 4 of AModify IndexB (A pg. 39) before
continuing.
2 Press selection keys to select ACHAPTERB, then press
ENTER.
3 Press I to start playback.
EDITING > MODIFY CHAPTER
Press O or N, then press
03/10
W at the positions you want to
0 : 07 : 01
mark.
Play List
4 Press selection keys to select
It is a collection of the scenes. A play list can be freely edited and
played back without ever changing any original recording data.
Using the random access of a disc (which allows video data to be
instantly read no matter where it is on the disc), a play list includes
information such as the timer counter for the playback start point
and end point, indexes for checking the contents of recorded data,
category information, and more. Playback according to a play list
you have created allows you to enjoy various combinations of
video images from a single title.
AMARKB, then press ENTER.
01 00 : 00 : 00
02 00 : 05 : 30
03 00 : 07 : 00
04 00 : 30 : 00
● To undo the marking, press
selection keys to select
MARK
ERASE
RETRY
RETURN
ARETRYB, then press ENTER.
● Repeat the above steps 3 and 4 to locate another point to mark.
5 Press S or T to select one chapter you want to delete,
press selection keys to select AERASEB, then press ENTER.
● To undo the deletion, press selection keys to select ARETRYB,
then press ENTER.
6 Press EDIT to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
42
Create Play List
Add scenes
1 Press EDIT. The Editing screen appears.
1 Perform steps 1 – 5 of AEdit ScenesB on the left column before
continuing.
2 (DVD deck only) Press selection keys to select AMODIFYB
under AORIGINAL/PLAY LISTB, then press ENTER.
ENTER.
3 Press selection keys to select ACREATEB, then press ENTER.
3 Perform steps 4 – 11 of ACreate Play ListB on the left column.
4 Press selection keys to select a title that includes scenes to be
included in a play list, then press ENTER.
Move Scenes
5 Press I to start playback. Press O or N to find the point
where you want the created play list to begin, then press W.
1 Perform steps 1 – 5 of AEdit ScenesB on the left column before
continuing.
6 Confirm the arrow is on AIN/
00 : 00 : 00
PAGE
1 / 1
EDITING > SCENE
TOTAL TIME
OUTB, then press ENTER.
● The edit-in time is displayed on
the screen.
SCENE
PRO.
2 Press selection keys to select AMOVEB, then press ENTER.
1
2
3
4
5
6
7
8
1
ENTER.
● To undo, press selection keys
to select ARETRYB, then press
ENTER.
PRO.
1
0 : 00 :15
4 Press selection keys to select another scene to which the
scene is to be moved, then press ENTER.
then press ENTER.
IN
OUT
MODIFY
DELETE
MOVE
RETRY
PREVIEW
OK
IN/OUT
SEL. TITLE
7 Press I to start playback.
Press O or N to find the
5 Perform steps 9 – 11 of ACreate Play ListB on the left column.
point where you want the created play list to end, then press W.
8 Confirm the arrow is on AIN/OUTB, then press ENTER.
Delete Scenes
● The edit-out time is displayed on the screen.
● The edit-out point must come after the edit-in point.
● Select APREVIEWB, then press ENTER to preview the play list.
continuing.
9 Press selection keys to select AOKB, then press ENTER.
11Press EDIT to return to the normal screen.
2 Press selection keys to select ADELETEB, then press ENTER.
3 Press selection keys to select a scene to delete, then press
ENTER.
NOTES:
4 Perform steps 9 – 11 of ACreate Play ListB on the left column.
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
● The title, index and category of the play list can be modified in the
same way as AORIGINALB. (A pg. 39)
Play Back Play List
1 Press NAVIGATION. The Library Database Navigation screen
● You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest
edition, etc.
appears.
2 Press selection keys to select APLAY LISTB, then press
ENTER.
3 Press selection keys to select
Edit Scenes
NAVIGATION > PLAY LIST
the index (small pictures) of
0026 [FISH WORLD
026 CREATED 12/26/03 FRI
TEDDY BEAR 25/12
]
143 MIN
003
the desired play list, then
press ENTER.
● When you want the plural play
lists to be played back
continuously, press MEMO
after selecting the desired play
lists. The numbers of the
playback order appear on the
index. You can select up to 8
play lists.
● When you want to correct the order, move the arrow to the
desired index and press MEMO. The number disappears and
the unit re-numbers the other play lists automatically.
● When you want to cancel the order, press CANCEL.
1 Press EDIT. The Editing screen appears.
001
004
007
002
005
008
SELECT WITH @
THEN PRESS [ENTER]
2 (DVD deck only) Press selection keys to select AMODIFYB
PRESS [NAVIGATION]
TO EXIT
006
under AORIGINAL/PLAY LISTB, then press ENTER.
3 Press selection keys to select AMODIFYB under APLAY LISTB,
then press ENTER.
009
NAVIGATION
EXIT
ENTER
SELECT
4 Press selection keys to select a play list to modify, then press
ENTER.
5 Press selection keys to select ASCENEB, then press ENTER.
6 Press selection keys to select AMODIFYB, then press ENTER.
7 Press selection keys to select the start or end point of a scene
to modify, then press ENTER.
8 Perform steps 5 – 11 of ACreate Play ListB above.
4 Press selection keys to select ABEGINNINGB, then press
ENTER. The playback starts.
● Upon completing play list playback, the normal screen will
resume.
● The normal screen will also resume when o is pressed to stop
play list playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
43
Delete Play List
Navigate Library Information
1 Press EDIT. The Editing screen appears.
2 (DVD deck only) Press selection keys to select AMODIFYB
under AORIGINAL/PLAY LISTB, then press ENTER.
3 Press selection keys to select ADELETEB under APLAY LISTB,
then press ENTER.
Title information can be registered in the unit’s memory for up to
600 DVD discs, 2,000 titles. It is helpful when finding a desired title
(or play list) by sorting according to the sort options registered
during (or after) recording.
4 Press selection keys to select one play list you want to delete,
then press ENTER.
5 Press selection keys to select ADELETEB, then press ENTER.
● When you cancel the deletion, select ACANCELB, then press
ENTER.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press HDD or DVD to choose the corresponding deck.
6 Press EDIT to return to the normal screen.
NOTE:
TV
DVD
information are not affected at all.
HDD
DVD
Modify Index
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 42) before
continuing.
B Perform steps 5 – 8 of AModify IndexB (A pg. 39).
Modify Play List Name
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 42) before
continuing.
NAVIGATION
ENTER
Selection Keys
FGDE
B Perform steps 2 – 5 of AModify Title NameB (A pg. 39).
Scan For Title From Library
Modify Category
A Perform steps 1 – 4 of AEdit ScenesB (A pg. 42) before
continuing.
1 Press NAVIGATION. The Library Database Navigation screen
appears.
2 Press selection keys to select
B Perform steps 2 – 4 of AModify CategoryB (A pg. 40).
NAVIGATION
the appropriate sort button to
DVD NAVIGATION
sort the information, then
press ENTER.
ADATEB:
Sort by date
ADISC No.B:
Sort by disc number
ACATEGORYB:
Sort by category
ANAMEB:
ORIGINAL
PLAY LIST
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
TO EXIT
DVD LIBRARY
DATE
CATEGORY
DISC No.
NAME
ENTER
NAVIGATION
EXIT
A
SELECT
Sort by name
● ADATEB and ADISC No.B are available for the DVD deck only.
3 Press selection keys to select the desired title, then press
ENTER.
● For HDD deck, playback begins automatically after the selected
title is located.
● For DVD deck, the title information will be displayed after the
selected title is located. However, playback will not begin
automatically.
NOTE:
If a disc registered in the library is recorded or modified on DVD
units from other manufacturers, it may become impossible to
operate properly.
Register Disc
When a disc that is not registered in the library is loaded, a
message appears confirming if the disc should be registered. If
registering, perform the following procedure.
1 Press selection keys to select AREGISTERB, then press
ENTER to confirm the registration.
2 Press NAVIGATION to return to the normal screen.
NOTES:
● It is not possible to register discs formatted on devices other than
JVC’s DVD recorders.
● It is not possible to register discs recorded on devices other than
JVC’s DVD recorders.
● It is not possible to register discs when ASAVE AS LIBRARYB is
set to AOFFB. (A pg. 59)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATION ON HDD/DVD DECK
EN
44
Locating The Desired Folders And Tracks
Playback With MP3/WMA/JPEG
Navigation
1 Load a disc.
2 Press NAVIGATION.
3 Press selection keys to select AORIGINALB, then press
ENTER.
4 Press selection keys to select
NAVIGATION > ORIGINAL (INSERTED DISC)
This unit can play back discs that MP3/WMA sound files and JPEG
image files taken with digital still cameras or other devices are
recorded.
The MP3/WMA/JPEG Navigation enables you to search and select
the desired files recorded on CD-R/RW or CD-ROM discs very
easily.
the desired folder, then press
TRACK: ---/000
01 Whose Side Are You On
ENTER.
>
ROOT
01 Whose Side Are You On
● A list of files in the selected
SELECT WITH @
THEN PRESS [ENTER]
02 Matt Bianco
folder appears.
03 Indigo
PRESS [NAVIGATION]
TO EXIT
04 Samba In Your Casa
05 Another Time Another Place
ENTER
NAVIGATION
EXIT
+
06 Gran Via
5
07 World Go Round
SELECT
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DVD to select the DVD deck.
5 Press selection keys to select
the desired item, then press
ENTER. The unit starts
playback from the selected
item.
● The unit stops when all items
played back.
NAVIGATION > ORIGINAL (INSERTED DISC)
TRACK: 001/010
01-Whose Side Are You On_.mp3
>
---PREVIOUS FOLDER---
SELECT WITH @
THEN PRESS [ENTER]
01-Whose Side Are You On_.mp3
02-More Than
03-No No Never.mp3
04-Half Minute.mp3
05
I
Can Bear.mp3
PRESS [NAVIGATION]
TO EXIT
A
NAVIGATION > ORIGINAL (INSERTED DISC)
ENTER
NAVIGATION
EXIT
-Matts Mood.mp3
06-Get Out of Your Lazy Bed.mp3
SELECT
TRACK: 001/010
01-Whose Side Are You On_.mp3
>
01 Whose Side Are You On
NOTES:
---PREVIOUS FOLDER---
SELECT WITH @
THEN PRESS [ENTER]
● If you press I instead of ENTER in step 4, the unit starts
playback from the first file of the folder.
● JPEG files are played back as a slide show at the set intervals.
(A pg. 30)
01-Whose Side Are You On_.mp3
02-More Than
03-No No Never.mp3
04-Half Minute.mp3
05
I
Can Bear.mp3
PRESS [NAVIGATION]
TO EXIT
A
ENTER
-Matts Mood.mp3
06-Get Out of Your Lazy Bed.mp3
NAVIGATION
EXIT
SELECT
● If a file name includes any 2-byte character, the unit may not
show the file name correctly.
● The order of the folders and items shown in steps 4 and 5 may
differ from the order shown on your PC.
A Selected file number/total number of files in the group that
contains the selected file
B Name of the selected file
C Selected file
NOTES:
● If there are more than 100 files, the rest of the files are not
the TV screen.
● The on-screen bar will display AMP3/WMAB regardless of
whether MP3 or WMA files are played.
● If both MP3/WMA files and JPEG files are recorded on the same
disc, you can select to play back either of the file types using the
AMP3&WMA/JPEGB setting. (A pg. 59)
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
45
● Recording may not be performed in the highest speed depending
on the characteristics of the disc used.
Dubbing
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
1 Load a recordable disc.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select AHDDNDVDB, then press
ENTER.
4 Press selection keys to select AHIGH SPEEDB, then press
ENTER.
TV
DVD
5 Press selection keys to select indexes (small pictures) of
desired original recordings and/or play lists, then press MARK.
After selecting all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings and/or play lists.
HDD
DV
DVD
●
The recordable time of the disc is displayed on the bar meter. For
details, refer to About Disc Remaining Display pg. 48).
A
B
(A
MARK
6 Press selection keys to select AEXECUTEB or AAUTO
FINALIZEB, then press ENTER to start dubbing.
NOTES:
ENTER
Selection Keys
FGDE
● Play lists are dubbed as programs.
● In Video mode, if the selected play list includes the scenes
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
● During dubbing, it is not possible to play back on HDD or DVD.
● It is not possible to discontinue dubbing once it has been started.
I
R
o
W
Just Dubbing (From HDD To DVD)
DUBBING
By using Just Dubbing function, when dubbing all selected original
recordings and/or play lists, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the selected recordings and/or play lists to be dubbed
and the available disc space.
1 Load a recordable disc.
Auto Finalizing
When dubbing from a Mini DV or HDD to a DVD-R/RW (Video
automatically after dubbing has been completed.
3 Press selection keys to select AHDDNDVDB, then press
ENTER.
It is also possible to set the operation method of a DVD-R/RW
(Video mode) disc when finalizing the disc. Each time the
to the setting you have selected during finalization. For details,
refer to ADISC TYPEB (A pg. 62).
4 Press selection keys to select AJUSTB, then press ENTER.
5 Perform steps 5 – 6 of AHigh Speed Dubbing (From HDD To
DVD)B.
NOTES:
● Play lists are dubbed as programs.
NOTE:
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
However, the lower transfer rate cannot be dubbed in the higher
transfer rate.
You can select and set the background to be used when Auto
Finalizing a DVD-R/RW (Video mode) disc. For details, refer to
ASetting The BackgroundB (A pg. 64).
NOTES:
● It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
● The order of the index which is displayed by pressing
DUBBING differs from the images displayed by pressing
NAVIGATION or EDIT.
● The recordable time of the disc is displayed on the bar meter. For
details, refer to AAbout Disc Remaining DisplayB (A pg. 48).
● During dubbing, it is not possible to play back on HDD or DVD.
● It is not possible to discontinue dubbing once it has been started.
Manual Dubbing (From HDD To DVD)
It is possible to perform dubbing in the desired transfer rate.
High Speed Dubbing (From HDD To DVD)
It is possible to dub the original recordings and/or play lists on the
HDD deck to DVD discs. The dubbing is performed in high speed,
keeping the original transfer rate.
1 Load a recordable disc.
3 Press selection keys to select AHDDNDVDB, then press
NOTES:
ENTER.
● After accessing the Dubbing Menu screen, it is not possible to
take out a disc.
4 Press selection keys to select AMANUALB, then press
ENTER.
● It is not possible to dub copy-once titles in Video mode.
● When dubbing a copy-once title, the data will be moved from
HDD to DVD upon completing dubbing.
● When you cancel dubbing a copy-once title during dubbing, the
original recording on the HDD deck remains and the title copied
to a DVD disc is deleted.
● It is not possible to dub play lists which contain copy-once titles.
● It is not possible to dub the following programs to DVD-R/RW disc
(Video mode):
● which contains more than one audio language.
● which is on the play list.
The Manual Dubbing screen appears.
6 Press selection keys to select AREC MODEB, then press
ENTER. Press selection keys to select the desired option,
then press ENTER.
● For details on the recording mode, see ARecording ModeB
(A pg. 50)
7 Press G to select ACONFIRMB, then press ENTER.
8 Press selection keys to select AEXECUTEB or AAUTO
● which is edited (also RetroActive Recording).
● which is recorded in LP mode or FR155-FR240 mode.
FINALIZEB, then press ENTER to start dubbing.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
46
NOTES:
It is possible to perform dubbing from the DVD deck to the DV
deck.
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
However, the lower transfer rate cannot be dubbed in the higher
transfer rate.
1 Load the disc you want to dub onto the DVD deck, and a Mini
DV cassette with the erase protection switch set to ARECB to
the DV deck.
● The recordable time of the disc is displayed on the bar meter. For
details, refer to AAbout Disc Remaining DisplayB (A pg. 48).
● During dubbing, it is not possible to play back on HDD or DVD.
● It is not possible to discontinue dubbing once it has been started.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select ADVDNDVB, then press
ENTER.
Dubbing From HDD To DV
It is possible to perform dubbing from the HDD deck to the DV
deck.
4 Press selection keys to select indexes (small pictures) of
desired original recordings, then press MARK. After selecting
all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings.
1 Load a Mini DV cassette with the erase protection switch set to
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER. The confirmation screen
appears.
ARECB.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select AHDDNDVB, then press
ENTER.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
● Sound mode selection is not available when dubbing a
DVD-R/RW (Video mode) disc.
4 Press selection keys to select indexes (small pictures) of
desired original recordings and/or play lists, then press MARK.
After selecting all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings and/or play lists.
7 Press G to select ACONFIRMB, then press ENTER. The
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER.
confirmation screen appears.
8 Press I to locate the point from where you want to start
dubbing, press o or W then press R and W simultaneously so
that the DV deck enters the record pause mode.
● The dubbing screen will appear.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
7 Press G to select ACONFIRMB, then press ENTER. The
9 Press selection keys to select AEXECUTEB, then press
confirmation screen appears.
ENTER to confirm.
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
8 Press I to locate the point from where you want to start
dubbing, press o or W then press R and W simultaneously so
that the DV deck enters the record pause mode.
● The dubbing screen will appear.
10Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
9 Press selection keys to select AEXECUTEB, then press
ENTER for confirmation.
NOTES:
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
● It is not possible to dub play lists on DVD discs.
● It is not possible to dub Video CDs/SVCDs or Audio CDs.
● It is not possible to dub from +R/+RW discs.
● When dubbing is in progress, only o is functional.
10Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
Original Dubbing (From DVD To HDD)
It is possible to dub the original recordings on DVD discs to the
HDD deck.
1 Load a disc you want to dub.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select ADVDNHDDB, then press
ENTER.
4 Press selection keys to select indexes (small pictures) of
desired original recordings, then press MARK. After selecting
all indexes you want to dub, press ENTER.
● You can select up to 8 original recordings.
5 Press selection keys to select AEXECUTEB, then press
ENTER to start dubbing.
NOTES:
● It is not possible to dub play lists on DVD discs.
● It is not possible to dub pre-recorded DVD VIDEO discs.
● It is not possible to dub Video CDs/SVCDs or Audio CDs.
● It is not possible to dub from +R/+RW discs.
● It is not possible to discontinue dubbing once it has been started.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
47
● If the DV deck is in the stop mode, the unit will start dubbing
from the current tape position.
● If the DV deck is in the pause mode, the unit will start dubbing
from the point where the tape was paused after automatically
rewinding the tape for 2 seconds.
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
Dubbing From DV To HDD
(Dubbing An Entire Cassette)
It is possible to perform automatic dubbing of all the recorded
programs of a cassette from the DV deck to the HDD deck using
the AENTIREB dubbing. You cannot select the images to be
dubbed; all recorded images on the DV cassette will be dubbed.
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
1 Load the Mini DV cassette you want to dub. Make sure its erase
protection switch is set to ASAVEB.
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
● The tape will automatically be rewound.
2 Press DUBBING to access the Dubbing Menu screen.
NOTES:
3 Press selection keys to select ADVNHDDB, then press
● When there are blanks on the tape of more than 2 seconds, the
HDD deck will enter into pause mode while playback on DV deck
continues. This also applies to portions of the DV tape that are
damaged or unreadable. The last image is displayed on the TV
screen. Dubbing will resume once recorded portion is detected. If
the blank portion continues until the end of the tape, ADUBBING
COMPLETEDB appears on the TV screen when the tape end is
reached and the tape rewinds automatically.
ENTER.
4 Select AENTIREB, then press ENTER.
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
● Dubbing copyright guarded tape is not possible.
● When dubbing is in progress, o, ON SCREEN and AUDIO
buttons are functional.
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
Dubbing From DV To DVD
8 Press selection keys to select AEXECUTEB, then press
ENTER for confirmation.
(Dubbing An Entire Cassette)
● Once dubbing starts, it will continue dubbing until the end of the
tape is reached.
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
● If the tape is not rewind, the unit will start dubbing after
automatically rewinding the tape to the beginning.
It is possible to perform automatic dubbing of all the recorded
programs of a cassette from the DV deck to the DVD deck using
the AENTIREB dubbing. You cannot select the images to be
dubbed; all recorded images on the DV cassette will be dubbed.
1 Load the Mini DV cassette you want to dub. Make sure its erase
protection switch is set to ASAVEB.
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
2 Press DUBBING to access the Dubbing Menu screen.
● The tape will automatically be rewound.
3 Press selection keys to select ADVNDVDB, then press
NOTES:
ENTER.
● When there are blanks on the tape of more than 2 seconds, the
HDD deck will enter into pause mode while playback on DV deck
continues. This also applies to portions of the DV tape that are
damaged or unreadable. The last image is displayed on the TV
screen. Dubbing will resume once recorded portion is detected. If
the blank portion continues until the end of the tape, ADUBBING
COMPLETEDB appears on the TV screen when the tape end is
reached and the tape rewinds automatically.
4 Select AENTIREB, then press ENTER.
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
● Dubbing copyright guarded tape is not possible.
● When dubbing is in progress, o, ON SCREEN and AUDIO
buttons are functional.
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
8 Press selection keys to select AEXECUTEB or AAUTO
FINALIZEB, then press ENTER for confirmation.
● Once dubbing starts, it will continue dubbing until the end of the
tape is reached.
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
Dubbing From DV To HDD
(Dubbing A Part of A Cassette)
It is possible to select the images on the DV cassette to be dubbed
from the DV deck to the HDD deck using AMANUALB dubbing.
● If the tape is not rewind, the unit will start dubbing after
automatically rewinding the tape to the beginning.
1 Load the Mini DV cassette you want to dub. Make sure its erase
protection switch is set to ASAVEB.
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
2 Press DUBBING to access the Dubbing Menu screen.
● The tape will automatically be rewound.
3 Press selection keys to select ADVNHDDB, then press
ENTER.
NOTES:
● The program information at the DV deck will not be dubbed.
● When there are blanks on the tape of more than 2 seconds, the
DVD deck will enter into pause mode while playback on DV deck
continues. This also applies to portions of the DV tape that are
damaged or unreadable. The last image is displayed on the TV
screen. Dubbing will resume once recorded portion is detected. If
the blank portion continues until the end of the tape, ADUBBING
COMPLETEDB appears on the TV screen when the tape end is
reached and the tape rewinds automatically.
4 Select AMANUALB, then press ENTER.
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
7 Press G to select ACONFIRMB, then press ENTER. The
● Dubbing copyright guarded tape is not possible.
● When dubbing is in progress, o and ON SCREEN buttons are
functional.
confirmation screen appears.
8 Press selection keys to select AEXECUTEB, then press
ENTER for confirmation.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
48
About Disc Remaining Display
Dubbing From DV To DVD
When dubbing from HDD to DVD, the unit displays the time
information for dubbing by bar meter. By comparing the disc
remaining time and the necessary time for dubbing of the selected
items, it is possible to check if the dubbing can be performed
completely or not.
(Dubbing A Part Of A Cassette)
It is possible to select the images on the DV cassette to be dubbed
from the DV deck to the DVD deck using AMANUALB dubbing.
1 Load the Mini DV cassette you want to dub. Make sure its erase
When performing the High Speed Dubbing
protection switch is set to ASAVEB.
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
Capacity of a disc
Remaining capacity
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select ADVNDVDB, then press
21%
ENTER.
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
4 Select AMANUALB, then press ENTER.
5 Press selection keys to select ASELECT RECORDING
MODEB, then press ENTER. Press selection keys to select
the desired option, then press ENTER.
6 Press selection keys to select ASELECT SOUND MODEB,
then press ENTER. Press selection keys to select the desired
option, then press ENTER.
When performing the Just Dubbing
TOTAL 105MIN
7 Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The total time of a loaded disc is displayed on the right of the bar
meter.
8 Press selection keys to select AEXECUTEB or AAUTO
FINALIZEB, then press ENTER for confirmation.
● If the DV deck is in the stop mode, the unit will start dubbing
from the current tape position.
● If the DV deck is in the pause mode, the unit will start dubbing
from the point where the tape was paused after automatically
rewinding the tape for 2 seconds.
When performing the Manual Dubbing
● To cancel the dubbing, press o then selection keys to select
ACANCELB and press ENTER to confirm.
MAX FR240
9 Upon completing dubbing, the tape stops and ADUBBING
COMPLETEDB appears on the TV screen. Press ENTER to
end.
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The available highest transfer rate is displayed on the right of the
bar meter.
● The tape will automatically be rewound.
NOTES:
● The program information at the DV deck will not be dubbed.
● When there are blanks on the tape of more than 2 seconds, the
DVD deck will enter into pause mode while playback on DV deck
continues. This also applies to portions of the DV tape that are
damaged or unreadable. The last image is displayed on the TV
screen. Dubbing will resume once recorded portion is detected. If
the blank portion continues until the end of the tape, ADUBBING
COMPLETEDB appears on the TV screen when the tape end is
reached and the tape rewinds automatically.
● Dubbing copyright guarded tape is not possible.
● When dubbing is in progress, o and ON SCREEN buttons are
functional.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
49
1 Connect a camcorder or DV equipment to the [DV IN/OUT]
connector on the unit’s front panel.
DV Dubbing (HDD & DVD Deck Only)
2 Press DV/HDD/DVD on the unit repeatedly; or press HDD or
DVD on the remote control to select the recording deck.
● When dubbing to a DVD disc, load a recordable disc on this
unit.
You can dub programs from a camcorder or DV equipment
connected to the unit with a DV cable. The unit’s remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
3 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to set the channel to ADVB.
NOTE:
4 Press ON SCREEN.
When connecting the unit to a device equipped with a DV input
connector, be sure to use the optional DV cable (VC-VDV 204U).
● The on-screen display for DV dubbing appears.
5 Press selection keys to select
, then press ENTER
to display the remote icon (facing to the right) for the DV
equipment.
Your unit
6 Press REC MODE repeatedly to set the recording mode. For
DV deck, press REC MODE on the remote control to set the
recording mode.
as follows:
XP N SP N LP N EP N FR (60-360*, 420, 480) N (Back to the
beginning)
To [DV IN/OUT]
* The value is selectable from 1 to 6 hours in 5 minutes interval by
pressing D E repeatedly after selecting AFR60–FR360B. To change
the value in 30 minutes interval, press and hold D E.
● For details on the recording mode, see ARecording ModeB
(A pg. 50).
Camcorder
DV cable
7 Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control: I, N, O, o, W.
(VC-VDV 204U)
(not supplied)
● To play back in slow speed (1/10 of the normal speed), press W
to pause playback, then press O or N.
● To play back frame-by-frame, press W to pause playback, then
press W repeatedly. Each press of W advances a frame.
● To change the playback direction, press O or N.
DV connector
8 Press selection keys to select
, then press ENTER
repeatedly until the desired sound track appears on the TV
screen.
DV equipment
SOUND1:
Select this to record the original stereo sound played back on
the connected DV equipment.
SOUND2:
Select this to record the dubbed stereo sound played back on
the connected DV equipment.
The following on-screen display for DV dubbing appears when
ON SCREEN is pressed while the channel has been set to ADVB.
MIX:
0:00
FR360 00:00:00. 00
12bit
DV JVC
1:00
2:00
GR-DV3500
00:00:00. 00
DV
HDD
L
–
R
Select this to record the sound of both ASOUND1B and
ASOUND2B.
● Note that this selection is not available when the source
GR-DV3500
SOUND1
program is recorded in 16BIT (48 kHz) mode.
9 Press selection keys to select
ENTER. The dubbing starts.
, then press
1
2
DV
DV
● Playback on the external DV equipment and recording on the
unit should start simultaneously.
● To pause dubbing, press selection keys to select
then press ENTER. Both the unit and the external DV
equipment pause dubbing. Pressing W on the unit also works
the same way.
A
B
C
,
A Remote control switch
To switch between the devices operable by the remote control
unit. The unit is operable when the remote icon (
)
displayed faces to the left, while the DV device is operable when
the remote icon is facing to the right.
10Press selection keys to select
, then press
B Auto capture button
ENTER. Then press o. The DV equipment stops.
Select to start or pause the dubbing. If ENTER is pressed when
the DV device is in the pause condition, preroll editing* where it
is possible to dub with a start time that is highly accurate will be
activated. When the DV device cannot be operated from the unit
(such as in camera mode), proceed with normal recording.
11Press selection keys to select
ENTER.
, then press
12Press o twice on the remote control to stop dubbing.
● Both the unit and the external DV equipment stop dubbing.
●
Do not start dubbing at the portion with no time code (A– –:– –:– –B).
NOTES:
* Preroll editing refers to the playback after the DV tape is slightly rewind.
(For DV devices that do not support the –1x speed, the rewinding time
may be longer.)
● To create chapters (marks) automatically, set ADV AUTO
CHAPTERINGB to AONB. (A pg. 59)
● Dubbing copyright guarded programs is not possible.
C Sound monitor switch
● Original DV information such as the recording date and time are
not recorded.
For selecting the desired sound format for dubbing.
● The superimposed indication during the operation or dubbing is
not recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
50
● If the dubbing is paused while the channel is set to ADVB, you
cannot switch channels.
Free Rate Function
To record the entire program, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining
disc space or the specified recording time (from 60 minutes to 480
minutes).
When you dub from DV equipment other than a
camcorder
A Perform steps 1 – 4.
B Locate the point from where you want to start dubbing,
then stop on the DV equipment.
● If you pause the DV equipment in this step, a few
the recorded program.
8 To record the entire program within the actual remaining
disc space (DVD deck only)
Select AFR (JUST)B in a recording mode selection procedure.
● Note that this function is available only when dubbing from HDD
to DVD (A pg. 45).
C
Set the input mode to ADV INPUTB on the DV equipment.
● If you select an input mode other than ADV INPUTB,
unwanted pictures may be recorded at the beginning of
the recorded program.
8 To record the entire program by specifying the desired
recording time
Select AFR60–FR360B, AFR420B or AFR480B in a recording mode
selection procedure.
D Perform steps 9 – 12.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press selection keys
8 To record a 25-min. long program five times on the same
DVD disc for example
Be sure to set the recording mode to AFR125B to fit the total
recording time to the whole disc space.
to select
.
Locate the point where you want to restart dubbing by pressing I,
N, or O, then press o.
Press selection keys to select
restart dubbing.
, then press ENTER to
A: 1st
B: 2nd
Blank
C: 3rd
D: 4th
E: 5th
Recording Mode
MPEG2 format is used as recording format. As a guide for picture
quality, the AbpsB unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programs where quick movement occurs, such
as sports programs, and LP or EP for talk shows, etc. with
relatively less movement.
When the same program is recorded in SP mode instead of in
AFR125B, the 5th program cannot be recorded.
A: 1st
B: 2nd
C: 3rd
The recording modes for a 4.7 GB disc are set as follows:
Blank
D: 4th
E: Blank (20 min.)
Recording mode
Recording amount
(approx.)
Maximumrecording
time (approx.)
XP
10 Mbps
5 Mbps
1 hour
2 hours
4 hours
1 – 6 hours
7 hours
8 hours
SP
NOTES:
LP
2.5 Mbps
1.6 Mbps
● The maximum recording time of FR (JUST) mode is the same as
the recording time of FR480 mode. When dubbing a long
program in FR (JUST) mode on a disc whose remaining time is
short, it is recommended to check the disc remaining time in
FR480 mode to see if the remaining time is enough for the
program.
EP
60-360
The amount varies
depending on the
selected time.
FR
420
480
● In order to ensure that the recording fits on the disc, this feature
may leave a slight non-recorded section at the end of the disc.
● There may be some noise and sound disturbance at the point on
the disc where the unit switches the mode.
● For details on FR mode, refer to AFree Rate FunctionB on the
right column.
The recording modes for the HDD are set as follows:
Recording mode
Maximum recording time (approx.)
XP
SP
8 hours
16 hours
33 hours
49 hours
71 hours
LP
EP
FR480
● For details on FR mode, refer to AFree Rate FunctionB.
NOTE:
The maximum recording time stated in the above table are the
approximate time under unused condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
51
● Slide the TV/DVD switch to DVD.
1 Make connections.
Edit From A Camcorder
You can use a camcorder as the source player and your unit as the
recording deck. If your camcorder has a DV IN/OUT connector, you
can use the camcorder as the recording deck and your unit (DV
deck only) as the source player.
A If the camcorder has no S-VIDEO output connector:
^ connect the camcorder’s AUDIO/VIDEO OUTPUT
connectors to the unit’s [VIDEO/AUDIO ((MONO) L/R)] input
connectors on the front panel.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO-L] input connector on your unit.
B If the camcorder has an S-VIDEO output connector:
^ connect the camcorder’s AUDIO OUT and S-VIDEO OUT
connectors to the unit’s [AUDIO] and [S-VIDEO] input
connectors on the front panel.
A If the camcorder has no S-VIDEO output connector:
C If the camcorder has a DV IN/OUT connector:
^ connect the camcorder’s DV IN/OUT connector to the unit’s
[DV IN/OUT] connector.
Recorder
To [VIDEO/AUDIO
((MONO) L/R)] input
● When using your unit as the source player, refer to the
camcorder’s instruction manual for the recording procedure.
Audio/video cable
(not supplied)
recording deck.
3 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select AF-1B or ADVB.
● Set AFRONT AUX F-1B to AVIDEOB for the [VIDEO] input
connector, or AS-VIDEOB for the [S-VIDEO] input connector,
depending on the connector being used. (A pg. 60)
AUDIO/VIDEO OUTPUT
4 Press REC MODE repeatedly to set the recording mode. For
DV deck, press REC MODE on the remote control to set the
recording mode.
Player
B If the camcorder has an S-VIDEO output connector:
5 Start playback on the camcorder slightly before the actual point
from where you wish to start dubbing.
6 Press R on the unit to start recording. Or while holding R, press
I on the remote control. The dubbing starts.
7 Press o on the unit, then stop playback on the camcorder.
NOTES:
To
[S-VIDEO]
input
Recorder
To [AUDIO] input
● All necessary cables can be obtained from your dealer.
● Refer to the camcorder’s instruction manual for operating
procedure.
● The quality of dubbed picture becomes poorer than that of the
original.
the signal is interrupted.
● When connecting the unit to a device equipped with a DV input
● To edit through the [DV IN/OUT] connector using the HDD or
DVD deck, refer to ADV Dubbing (HDD & DVD Deck Only)B
(A pg. 49).
S-video cable
(not supplied)
Audio cable
(not
supplied)
S-VIDEO
OUTPUT
● When using your unit as the recording deck, chapters (marks)
can be automatically created. Set ADV AUTO CHAPTERINGB to
AONB. (A pg. 59)
AUDIO OUTPUT
Player
C If the camcorder has a DV IN/OUT connector:
Recorder/Player
To [DV IN]
DV cable
(VC-VDV 204U)
(not supplied)
DV connector
Player/Recorder
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
52
● Slide the TV/DVD switch to DVD.
Edit To Or From Another Recorder
1 Make connections.
You can use your unit as the source player or as the recording
deck.
A When using your unit as the source player:
^ connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
to the input connectors on another recorder.
B When using your unit as the recording deck:
^ connect its [S-VIDEO/VIDEO/AUDIO INPUT] connectors on
the front or rear panel to the output connectors on another
recorder.
NOTES:
● When using another recorder as the recording deck, refer to its
instruction manual.
● It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
● When connecting to another recorder with S-video connector,
set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
A When using your unit as the source player
2 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select the external input.
● Select AF-1B when the source player is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select AL-1B when it is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
TV
Player
Your unit
3 Press REC MODE repeatedly to set the recording mode.
4 Engage the Play mode on the source player.
5 Engage the Record mode on the recording deck.
6 Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 59)
Another recorder
Recorder
B When using your unit as the recording deck
TV
Recorder
Your unit
Another recorder
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
53
1 Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
Digital Audio Dubbing
2 Place a disc on the unit and load an MD on the connected
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
digital audio device.
3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
4 Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
wish to start dubbing.
5 Press W to pause playback.
Example: Dubbing to an MD
Recorder
6 Select the input mode on the connected digital audio device.
7 Press I to start playback on the unit.
8 Start recording on the digital audio device.
9 Stop recording on the digital audio device. Then press o to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
Optical cable
(not supplied)
To [DIGITAL AUDIO
OUTPUT (COAXIAL)]
To [DIGITAL AUDIO
OUTPUT (OPTICAL)]
Player
Rear of unit
Note for connection:
Remove the protection cap from the optical cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
54
● Slide the TV/DVD switch to DVD.
Audio Dubbing (DV Deck Only)
1 Connect an audio device to the unit’s [AUDIO] input connectors
on the front panel.
● When using a monaural audio device, connect its AUDIO OUT
connector to the [AUDIO-L] input connector on your unit.
This function allows you to record new audio, without erasing the
original audio, on a DV tape that was recorded with ADV AUDIO
RECB set to A12BITB (A pg. 60).
2 Load a Mini DV cassette with the erase protection switch set to
ATTENTION:
ARECB.
You cannot perform Audio Dubbing on a tape that was recorded
with ADV AUDIO RECB set to A16BITB (A pg. 60), on a tape that
was recorded at the ALPB speed, or on a blank tape.
3 Press DV/HDD/DVD on the unit repeatedly or DV on the remote
so that the DV lamp lights up on the unit.
4 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select AF-1B.
Your unit
Recorder
5 Start playback slightly before the actual point from where you
wish to start dubbing.
7 Press AUDIO DUB. to engage the audio dubbing mode.
● Your unit enters the Audio Dubbing Pause mode.
● To perform Audio Dubbing with audio mixing, press AUDIO to
select AL W X RB at this point. When using the DV deck as the
recording deck, also make sure that AAUDIO MODEB is set to
ASOUND1B (A pg. 60).
INPUT SELECT
AUDIO DUB.
To [AUDIO]
input
Audio cable
(not supplied)
* Audio Dubbing with audio mixing is not possible if you are using a
monaural audio component, or if you don’t have an audio mixer.
8 Engage the audio device’s playback, then press I to start the
tape in the unit. Audio dubbing starts at this point.
dubbing.
AUDIO OUT
CD player, etc.
end the audio dubbing.
NOTES:
● When monitoring the audio dubbed sound on the DV deck, set
AAUDIO MODEB to ASOUND2B (A pg. 60).
● When playing back an audio dubbed Mini DV tape on the DV
deck, set AAUDIO MODEB to ASOUND2B (A pg. 60).
● Audio dubbing is not possible using the [DV IN/OUT] connector.
● Audio dubbing is not possible on a blank portion of the tape.
CD player, etc.
Mixer output
Audio mixer
Recorder
Original sound
[AUDIO OUTPUT]
Your unit
INPUT SELECT
AUDIO DUB.
To
[AUDIO]
input
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
55
● Slide the TV/DVD switch to DVD.
1 Make connections.
Insert Editing (DV Deck Only)
Insert Editing replaces the pictures with new ones, while the audio
soundtrack remains unchanged. For Insert Editing, use your unit
as the recording deck.
A If the player has no S-VIDEO output connector:
^ connect the player’s VIDEO OUT connector to your unit’s
[VIDEO] input connector on the front panel.
B If the player has an S-VIDEO output connector:
^ connect the player’s S-VIDEO OUT connector to your unit’s
[S-VIDEO] input connector on the front panel.
ATTENTION:
Insert Editing is not possible with a Mini DV cassette recorded in
LP mode.
2 Load a Mini DV cassette with the erase protection switch set to
ARECB.
A If the player has no S-VIDEO output connector:
3 Press DV/HDD/DVD on the unit repeatedly or DV on the remote
INPUT SELECT
so that the DV lamp lights up on the unit.
Your unit
Recorder
4 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select AF-1B.
5 Press S, T and W to determine the edit-in point (the
beginning of the segment to be replaced).
● Be sure to engage the Still mode at the edit-in point.
To [VIDEO] input
6 Press INSERT to engage the insert editing mode.
INSERT
● Your unit enters the Insert Pause mode.
● The TV screen changes from the still picture to the input source
you are going to record.
Audio/video
cable
(not supplied)
7 Load the source cassette and play back the segment that is to
be inserted. When you reach the start of the section of the
source tape that you wish to insert, press I to start the tape in
your unit. Insert editing begins at this point.
8 Press o to stop recording on the DV deck to end insert editing.
VIDEO OUT
NOTES:
● All necessary cables can be obtained from your dealer.
● Insert Editing cannot be performed on a Mini DV cassette that
has had its erase protection switch set to ASAVEB.
● When Insert Editing is performed on a tape that has been
recorded on another video recorder, the inserted portion may
appear distorted.
Another recorder
Player
● A small portion of the recording which precedes an insert edit
may become erased.
● Insert Editing is not possible using the [DV IN/OUT] connector.
● Insert Editing is not possible on a blank portion of the tape.
B If the player has an S-VIDEO output connector:
INPUT SELECT
Your unit
Recorder
To [S-VIDEO]
input
INSERT
S-video cable
(not supplied)
S-VIDEO OUT
Another recorder
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
EN
56
Remote Control Functions
Remote Control 1/2/3/4 Code Switching
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of the four
codes (1, 2, 3 or 4). The remote control is preset to send code 3
signals because your unit is initially set to respond to code 3
signals. You can easily modify your unit to respond to code 1, 2 or
4 signals.
TV
DVD
TV/VIDEO
TV d
A
TV 8 +/–
0 – 9
PR/CH +/–
● Slide the TV/DVD switch to DVD.
ENTER
A
I
SET UP
TV
DVD
● Keep pressing SET UP down during step 1.
1 – 4
1 Enter your TV’s brand code using the number keys, then press
ENTER.
2 Press A on the unit’s remote control to turn on the TV and try
operations (A step 3).
● Once you have set the remote control to operate the TV, you do
not have to repeat this step until you replace your remote
control’s batteries.
ENTER
● Some brands of TVs have more than one code. If the TV does
not function with one code, try entering another.
3 Press the corresponding buttons to operate the TV: A, TV/
VIDEO, PR/CH +/–, TV8 +/–, TV d, number keys.
● For some brands of TVs, you must press ENTER after having
pressed the number keys.
o
SET UP
BRAND NAME
CODE
JVC
01, 23, 24, 25
FERGUSON
FINLUX
FUNAI
LG/GOLDSTAR
GRUNDIG
HITACHI
ITT
27
30
32
18
19
10
28
03
● Keep pressing SET UP down during step 1.
1 Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4
to change the remote control code, then press ENTER.
2 Press A on the unit to turn off the unit.
3 Press I on the unit for over 5 seconds while the unit is turned
MITSUBISHI
MIVAR
off. The current code appears on the front display panel.
29
NEC
NOKIA
4 Press o on the remote control to change the unit’s code. The
new code blinks on the front display panel for approximately 5
seconds, and is applied to the unit.
20
31
04, 11
02
PANASONIC
PHILIPS
RCA
SAMSUNG
SANYO
TV Multi-Brand Remote Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
05
12, 33, 34, 35
13, 16
06
SHARP
SONY
THOMSON
TOSHIBA
07
26
08, 14
● Turn off the TV using its remote control.
● Slide the TV/DVD switch to TV.
IMPORTANT:
Although the provided remote control unit is compatible with JVC
televisions, as well as many other models, it may not work with
your TV, or in some instances, may have limited function capability.
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTIONS
EN
57
1 Connect the unit and a Dolby Digital Decoder or an amplifier
optional coaxial cable.
Connecting To A Dolby Digital Decoder
Or An Amplifier With Built-in DTS
NOTES:
● For Dolby Digital sound, set ADIGITAL AUDIO OUTB to ADOLBY
DIGITAL/PCMB. (A pg. 58)
These instructions enable you to connect your unit to a Dolby
Digital Decoder or an amplifier with built-in DTS.
● For DTS sound, set ADIGITAL AUDIO OUTB to ASTREAM/PCMB.
(A pg. 58)
CAUTIONS:
● This unit has a dynamic range of more than 110 dB with regards
to its Hi-Fi audio capability. It is recommended that you check the
maximum level if you are going to listen to the Hi-Fi audio signals
through a stereo amplifier. A sudden surge in the input level to
the speakers may damage them.
● Some speakers and televisions are specially shielded to prevent
television interference. If both are of the non-shielded type, do not
place the speakers adjacent to the TV set as this can adversely
affect the playback picture.
Dolby Digital Decoder or
amplifier with built-in DTS
When you can’t switch the audio channel of a bilingual
program
To DIGITAL AUDIO input
When the unit is connected with a digital audio device using an
optional optical cable and ADIGITAL AUDIO OUTB is set to
ADOLBY DIGITAL/PCMB, it is not possible to switch the audio
channel of a bilingual program recorded on a DVD-RAM or DVD-R/
RW (VR mode) disc. In this case, perform the following steps using
the remote control to switch ADIGITAL AUDIO OUTB from ADOLBY
DIGITAL/PCMB to APCM ONLYB.
Coaxial cable
(not supplied)
Optical cable
(not supplied)
To [DIGITAL AUDIO
OUTPUT
To [DIGITAL AUDIO
OUTPUT (OPTICAL)]
(COAXIAL)]
A Press SET UP to access the Main Menu screen.
B Press selection keys to select ADVD VIDEO SET UPB, then
press G.
C Press selection keys to select AAUDIO OUTPUTB, then press
G.
D Press selection keys to select ADIGITAL AUDIO OUTB, then
press ENTER.
Rear of unit
E Press selection keys to select APCM ONLYB, then press
ENTER. (A pg. 58)
F Press SET UP to complete the setting.
G Press AUDIO to select the desired audio channel.
Note for connection:
Remove the protection cap from the optical cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
58
* The boldface settings below indicate the settings at your purchase.
Mode Set
AUDIO OUTPUT
8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUTPUT] connector.
DOLBY DIGITAL/PCM:
TV
DVD
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
HDD
DVD
STREAM/PCM:
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
PCM ONLY:
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
ENTER
Selection Keys
FGDE
NOTES:
● This setting also functions when HDD is active.
● If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
AUDIO
SET UP
STEREO:
Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUTPUT] connectors connected
to a stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
Various modes of this unit are categorized into menus nested in 2
modes, find the desired mode in the menu (for details on each
DOLBY SURROUND:
Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUTPUT] connectors connected to an
amplifier/receiver with a built-in surround decoder or a surround
decoder.
DVD VIDEO SET UP
AUDIO OUTPUT (See right column)
DISC PLAY SET UP (A pg. 59)
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
HDD/DVD SET UP
HDD SET UP (A pg. 59)
DISC SET UP (A pg. 61, 62)
COMMON SET UP (A pg. 59)
FUNCTION SET UP
REC/PLAY SET UP (A pg. 59)
VIDEO IN/OUT (A pg. 21)
NORMAL:
Normally select this setting to activate this function.
WIDE RANGE:
INITIAL SET UP
DV SET UP
MENU BACKGROUND (A pg. 64)
CLOCK SET (A pg. 19)
Select this to deactivate this function when you enjoy wide
dynamic range program.
TV MODE:
(A pg. 60)
speaker(s).
● The procedure below shows how to set the desired option of the
AJUMP TIMEB mode as an example.
NOTES:
● This function has no effect on programs other than those
recorded in Dolby Digital format.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
● This function does not work when Simulated Surround Effect is
activated. (A pg. 29)
● The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
2 Press SET UP to access the Main Menu screen.
3 Press selection keys to select AFUNCTION SET UPB, then
press G.
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
DISPLAY SET
REC/PLAY SET UP VIDEO IN/OUT
INITIAL SET UP
8 OUTPUT LEVEL ^ STANDARD / LOW
AREC/PLAY SET UPB, then
press G.
You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.
XP MODE REC AUDIO
JUMP TIME
DOLBY DIGITAL
15 MIN
5 Press selection keys to select
AJUMP TIMEB, then press
ENTER.
STANDARD:
Normally select this setting.
LOW:
ENTER
SELECT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SET UP
EXIT
6 Press selection keys to select
the desired option, then press
ENTER.
The output level of analog audio is lowered.
7 Press SET UP to complete the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
59
DISC PLAY SET UP
8 MOTION INDEX ^ OFF / ON
When this function is set to AONB, you can set the picture on the
top left corner of the Library Database Navigation screen or the
Editing screen to that of the selected title.
8 RESUME ^ OFF / ON / DISC RESUME
When this function is set to AONB or ADISC RESUMEB, you can
use the resume function. (A pg. 24)
OFF:
REC/PLAY SET UP
8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to ALINEAR PCMB, you can obtain
a high-quality audio sound.
You cannot use the resume function.
ON:
You can start playback from the resume point of the placed disc.
DISC RESUME:
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
DOLBY DIGITAL:
To record in Dolby Digital format.
NOTE:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalized DVD-R/DVD-RW (video mode) discs. For other
LINEAR PCM:
You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to AJump SearchB (A pg. 24,
32).
HDD SET UP
8 LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can
apply the selected time length to ATemporary recording for Live
8 SUPERIMPOSE ^ OFF / ON / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
DVD SET UP
8 SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to ANavigate
Library InformationB (A pg. 43).
OFF:
To turn off superimposed indications.
ON:
To turn on superimposed indications.
8 CONTINUOUS PLAY ^ OFF / ON
When this function is set to AONB, multiple titles on a disc are
played back continuously one after another.
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
8 VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /
PRIORITIZE 16:9
NOTES:
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 52)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
This is the setting for the aspect ratio used when you dub titles to
DVD discs in video mode. If the titles you want to dub are recorded
in both 16:9 and 4:3, you must select one aspect ratio.
PRIORITIZE 4:3:
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is
dubbed in 4:3.
8 DIMMER (DURING POWER ON) ^ BRIGHT / DIMMED
PRIORITIZE 16:9:
You can change the brightness of the front display panel.
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is
BRIGHT:
dubbed in 16:9.
Normally select this.
DIMMED:
8 MP3&WMA / JPEG ^ MP3&WMA / JPEG
You can select files to play back, when both MP3&WMA files and
JPEG files are recorded on a disc.
To dim the front display panel.
8 DIMMER (DURING POWER OFF) ^ OFF / ON
You can select to light up or turn off the light of the front display
panel when the unit is off.
MP3&WMA:
Select this to play back MP3/WMA files.
JPEG:
OFF:
Select this to play back JPEG files.
To turn off the light of the front display panel when the unit is off.
ON:
COMMON SET UP
To light up the front display panel when the unit is off.
8 DV AUTO CHAPTERING ^ OFF / ON
8 QUICK STARTUP ^ OFF / ON
When this function is set to AONB, you can create chapters (marks)
when dubbing from the DV deck or via the DV input terminal
connecting the external DV camcorder.
When this function is set to AONB, operations such as playback can
be performed more quickly upon turning on the unit than when set
to AOFFB. However, the power consumption during standby
increases.
OFF:
Do not create chapters (marks).
OFF:
ON:
To disable the quick startup function.
Create chapters (marks).
ON:
NOTE:
Operations can be performed quickly after turning on the unit.
Marks cannot be created for direct recording to the DVD in Video
mode. Record to the HDD, then dub to the DVD.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to AOn-screen Language SetB (A pg. 20).
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
60
VIDEO IN/OUT
8 MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to AMonitor SetB (A pg. 21).
NOTE:
To display the ADV SET UPB menu, press SET UP while in the
DV deck mode.
DV SET UP
8 DV AUDIO REC ^12BIT / 16BIT
8 FRONT AUX F-1 ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
This is the setting for sound mode before recording on a Mini DV
tape.
12BIT:
VIDEO:
Enables Audio Dubbing later.
To use the [VIDEO] input connector on the front panel.
16BIT:
S-VIDEO:
Audio Dubbing is not possible but the recorded sound quality is
To use the [S-VIDEO] input connector on the front panel.
higher than A12BITB.
8 REAR AUX L-1 ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
8 AUDIO MODE ^ SOUND1 / SOUND2 / MIX
You can select the desired sound mode when playing back an
audio dubbed Mini DV tape.
VIDEO:
SOUND1:
To use the [VIDEO INPUT] connector on the rear panel.
Original recorded sound.
S-VIDEO:
SOUND2:
To use the [S-VIDEO INPUT] connector on the rear panel.
Audio dubbed sound.
MIX:
Original recorded sound and audio-dubbed sound.
NOTES:
● When AAUDIO MODEB is set to AMIXB, both the main and sub
audio will be audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual
tapes, set AAUDIO MODEB to ASOUND1B.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
61
Format A DVD-RAM Disc
Format A Disc (DVD Deck Only)
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
To use a DVD-R disc in VR mode, format the new disc in VR mode.
(It will be in Video mode when not formatted.)
3 Press selection keys to select AHDD/DVD SET UPB, then
press G.
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
DV SET UP
ADISC SET UPB, then press
G.
HDD SET UP
DVD SET UP
DISC SET UP
FINALIZE
Video
CANC. FINALIZ.
5 Press selection keys to select
ATTENTION:
FORMAT
AFORMATB, then press
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
ENTER. Press selection keys
to select AEXECUTEB, then
press ENTER.
ENTER
SET UP
EXIT
SELECT WITH @
PRESS [SET UP] TO EXIT
● Never turn off the unit or disconnect the AC power cord while
ANOW FORMATTING...B is displayed on the TV screen.
● DVD-R discs can only be formatted once.
SELECT
6 Press selection keys to select
AEXECUTEB, then press ENTER.
● Turn on the unit.
Format A DVD-RW Disc
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Load a DVD-RAM/R/RW disc to format.
1 Perform steps 1 – 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODEB, then press ENTER.
TV
DVD
AVR MODEB:
HDD
DVD
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
ENTER
ENTER.
Selection Keys
FGDE
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 40)
Format A DVD-R Disc
SET UP
1 Perform steps 1 – 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to select AEXECUTEB, then press
ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
62
Finalize A DVD-R/RW Disc
Finalize A Disc (DVD Deck Only)
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
screen directly. For details, refer to ADirect Access To ADISC
SET UPB ScreenB (A pg. 63).
Finalizing DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalized in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Title names input in the Library Database Navigation are
registered as title names in the DVD menu. (A pg. 39)
3 Press selection keys to select AHDD/DVD SET UPB, then
press G.
● If you want to change the ADISC TYPEB setting, proceed to
step 4. Otherwise, proceed to step 7 for disc finalization.
4 Press selection keys to select ADVD SET UPB, then press G.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Load a DVD-R/RW disc to finalize.
5 Press selection keys to select ADISC TYPEB, then press
ENTER.
6 Press selection keys to select the desired option, then press
ENTER.
7 Press selection keys to select ADISC SET UPB, then press G.
8 Press selection keys to select
TV
DVD
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
DV SET UP
HDD
AFINALIZEB, then press
ENTER.
HDD SET UP
DVD SET UP
DISC SET UP
DVD
FINALIZE
CANC. FINALIZ.
Video
● For DVD-R/RW (Video mode)
discs, the background
FORMAT
selection screen will appear.
To finalize using the current
background (with a check
ENTER
SET UP
EXIT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
F2
SELECT
it), press ENTER. To choose a new background, press
selection keys to select the desired background from a
selection of 18 backgrounds, then press ENTER.
ENTER
Selection Keys
FGDE
After selecting a background, you can preview the final result
before finalizing the disc. Refer to APreviewing the background
effectB (A pg. 64).
9 Press selection keys to select AOKB, then press ENTER.
10Upon completing finalization, ACOMPLETEDB appears on the
TV screen. Press ENTER to end.
SET UP
11Press SET UP to return to the normal screen.
● Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. Only display
for library appears.
● Once a DVD-RW (VR mode) disc has been finalized, it can be
played on DVD players compatible with VR mode.
● Once a DVD-R (VR mode) disc has been finalized, it can be
played on DVD players compatible with DVD-R (VR mode).
Before finalizing
● It is possible to record on a blank space.
● It is possible to enter title names. (A pg. 39)
● It is possible to delete titles. (A pg. 40)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
title is deleted from a DVD-R disc.
* The boldface settings below indicate the settings at your purchase.
● It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalized.
8 DISC TYPE ^ MANUAL START / MENU STOP / AUTO
REPEAT
After finalizing (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back
the discs as DVD VIDEO discs.
● Although DVD-R/RW discs finalized on this unit become playable
on DVD players compatible with DVD-R/RW discs, some discs
still may not play, for which JVC cannot take responsibility.
● Marked points marked before finalizing will be deleted, and titles
will be divided automatically into AchaptersB approximately every
5 minutes. (A pg. 25)
You can set the operation method of a DVD-R/RW (Video mode)
disc when finalizing the disc on this unit.
MANUAL START:
When the DVD disc is loaded, the disc will stop after it has been
read. To play back the disc, press I.
MENU STOP:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. Playback will stop when
the disc menu is displayed.
● Depending on the DVD players and DVD-R/RW discs used, and
on the conditions of recording, it may not be possible to play back
the discs. In this case, play back the discs on this unit.
● Additional recordings become impossible.
AUTO REPEAT:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. The disc will be played
repeatedly.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
63
Cancel The Finalization Of A DVD-RW Disc
1 Load a DVD-RW disc to cancel the disc finalization, and
perform steps 1 – 2 of AFinalize A DVD-R/RW DiscB (A pg. 62)
before continuing.
Direct Access To ADISC SET UPB Screen
When you wish to finalize or cancel the finalization of a disc,
besides accessing the ADISC SET UPB screen through the
SET UP button, you can also use the F2 button on the remote
control. This F2 button enables you to access the ADISC SET UPB
screen directly after loading the disc.
2 Press selection keys to select AHDD/DVD SET UPB, then
press G.
To finalize a disc
A Load the disc.
3 Press selection keys to select ADISC SET UPB, then press G.
4 Press selection keys to select
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
INITIAL SET UP
DV SET UP
ACANC. FINALIZ.B, then press
ENTER.
the unit.
HDD SET UP
DVD SET UP
DISC SET UP
FINALIZE
Video
CANC. FINALIZ.
5 Press selection keys to select
FORMAT
AOKB, then press ENTER.
6 Upon completing cancellation
of finalization,
ENTER
SET UP
EXIT
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT
To cancel finalization
COMPLETEDB appears on the
TV screen. Press ENTER to end.
A Perform steps A – C of ATo finalize a discB above.
● The screen in step 4 of ACancel The Finalization Of A DVD-RW
DiscB on the left column appears.
7 Press SET UP to return to the normal screen.
B Perform steps 4 – 7 of ACancel The Finalization Of A DVD-RW
● When the disc finalization is canceled, the mode in which the
disc was formatted is restored, making the disc recordable.
(A pg. 9, 61)
DiscB on the left column to cancel finalization of the disc.
NOTES:
● The direct access (F2) function works only when in the HDD or
DVD deck mode, on the condition that the Main Menu, Editing,
Library Database Navigation or Dubbing screen is not displayed.
● The direct access (F2) function will not work in the following
cases, and an operation prohibition mark A B appears on the
TV screen.
NOTE:
It is not possible to cancel the finalization of a DVD-R disc.
● During DVD recording or playback.
● Disc is not loaded.
● A playback-only disc is loaded.
● Disc reading in progress.
● Disc information acquisition failure when DVD-RAM is loaded.
● When this unit is in the DV deck mode or when dubbing is in
progress, the direct access (F2) function will also not work.
However, A B will not be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
64
Registering Default Background
Setting The Background
1 Press SET UP to access the Main Menu screen.
You can select a desired background from the 18 backgrounds
available on this unit, and set it as the default background to be
used during finalization (A pg. 45, 62).
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select AMENU BACKGROUNDB, then
press G.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
4 Press ENTER.
● The background selection screen appears. The current
background selected is indicated by a check mark A
superimposed on it.
● To return to the previous screen, press RETURN.
B
TV
DVD
5 Press selection keys to select the desired background, then
press ENTER.
● The A B mark is superimposed on the newly selected
background.
● A preview screen of the selected background will be displayed
for approximately 2 seconds.
● The selected background will be used as the default
background for finalization.
6 Press SET UP to return to the normal screen.
ENTER
Selection Keys
FGDE
RETURN
This unit allows you to preview the effect of the background you
have selected before proceeding with finalization. This preview
function is only possible when finalizing a DVD-R/RW (Video
mode) disc.
SET UP
After selecting a background in step 8 of AFinalize A DVD-R/RW
DiscB (A pg. 62):
A Press selection keys to select APREVIEWB, then press
ENTER.
● A preview screen of the final result of your selected background
will appear.
● To preview again, press selection keys to select
ARECONFIRMB, then press ENTER.
B Press selection keys to select AOKB, then press ENTER to
continue with finalization.
C Proceed to perform steps 9 – 11 of AFinalize A DVD-R/RW
DiscB (A pg. 62) to complete finalization.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
EN
65
Scan Mode Set (HDD & DVD Deck Only)
Tray Lock (DVD Deck Only)
If you connect the unit and TV with Component Video Connection
(A pg. 18), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction of
higher-quality images.
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
● Turn off the unit.
8 Interlaced scan
M
o
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8 Progressive scan
Progressive scan displays all the horizontal lines of a picture at one
time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
To lock tray
While the unit is turned off, press and hold o, then press M on the
unit. ALOCKB appears on the front display panel and the disc tray
is locked.
To unlock tray
ATTENTION:
While the unit is turned off, press and hold o, then press M on the
unit. AUNLOCKB appears on the front display panel.
Your TV needs to be compatible with NTSC Progressive.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
Mode Lock
TV
DVD
During playback or recording, press and hold F1 for more than 5
seconds. ALOCKB appears on the front display panel.
● No buttons will function and playback and recording will not be
interrupted.
HDD
DVD
except R and I.
To cancel Mode Lock, press and hold F1 again for more than 5
seconds.
NOTE:
It is also possible to use Mode Lock during Repeat Playback
(A pg. 27).
Last Function Memory
the memory. These settings will resume when the unit is turned on
PROGRESSIVE SCAN
● Input selection (channel or auxiliary input; L-1, F-1 or DV)
● Recorder selection (The last selected deck is memorized.)
● Recording mode (A pg. 49)
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
● Mode settings (A pg. 58 – 60)
2 Press PROGRESSIVE SCAN for 3 or more seconds.
● Video output indicator (q) lights on the front display panel if
Progressive scan mode has been established. (A pg. 14)
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video
material.
● Scan mode cannot be set while menu screen is displayed.
● When the Progressive scan mode is engaged, no video signal is
output from [S-VIDEO OUTPUT] connector and [VIDEO/AUDIO
OUTPUT] connectors.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
66
Before requesting service for a problem, use this chart and see if
you can solve the trouble yourself. Small problems are often easily
solved, and this can save you the trouble of sending your unit off
for repair.
●
When interlace scanned program is played back, progressive
scan mode is selected.
] Press and hold PROGRESSIVE SCAN until q disappears
from the front display panel. (A pg. 65)
Initializing (DVD Deck Only)
Malfunction occurs on the unit.
Playback does not start or stop immediately after playback is
started by pressing I.
On the front display panel, ANO DISCB appears.
] Press A to turn off the unit, press and hold A, then press o
●
The disc is loaded upside down.
for two seconds or more.
down. (A pg. 10)
General
No power is supplied to the unit.
●
A disc not being compatible with the unit is loaded.
] Load a playable disc on the unit. (A pg. 7)
A dirty disc is loaded.
] Clean the disc. (A pg. 11)
Defective disc is loaded.
●
●
The AC power plug is disconnected from the AC outlet.
] Connect the AC power plug to the AC outlet securely.
●
(A pg. 18)
] Replace the warped or scratched disc with a normal one.
The remote control does not work properly.
Images are blurred or distorted when you start High-Speed
Search.
] Remove the batteries, wait for 5 minutes or more, then load the
batteries again.
] Images are blurred or distorted at the point where the playback
●
The setting of the remote control code is inappropriate.
speed changes and this is not a malfunction of the unit.
Playback does not start.
and the remote control. (A pg. 56)
●
The batteries are discharged.
] Playback does not start for approximately 30 seconds after
] Replace the dead batteries with new ones. The remote control
code will revert back to its default setting A3B. If you had change
the remote control code prior to replacing the batteries, you
need to set the code again. (A pg. 56)
recording is stopped and this is not a malfunction of the unit.
Playback (HDD Deck)
The HDD deck cannot be operated.
Dubbing from the external equipment is not possible.
●
The HDD deck is not selected.
●
The source (another video recorder, camcorder) has not been
properly connected.
] Press DV/HDD/DVD on the unit repeatedly or HDD on the
remote so that the HDD lamp lights up on the unit.
All necessary power switches have not been turned on.
] Confirm that all units’ power switches are turned on.
The setting of the input channel position is inappropriate.
●
Playback (DV Deck)
The DV deck cannot be operated.
●
] Select the input channel position (AF-1B or AL-1B) that
equipment. (A pg. 52)
●
The DV deck is not selected.
] Press DV/HDD/DVD on the unit repeatedly or DV on the remote
control so that the DV lamp lights up on the unit.
The on-screen display superimposed on the program played
back/received on this unit is recorded when you dub the
program to an external recording equipment.
The tape will not rewind or fast-forward.
●
The tape is already fully rewound or fast-forwarded.
] Check the cassette.
] Set ASUPERIMPOSEB to AOFFB. (A pg. 59)
The playback picture does not appear while the tape is
running.
The unit does not operate.
●
●
There are cases when the operation is prohibited on the disc.
Lightning or static electricity may cause malfunction of the unit.
●
The TV is not set to the AV mode.
] Set the TV to the AV mode.
] Press A to turn the power off, then press the button again to
turn the power on.
Noise appears during visual search.
The remote control of a JVC TV will not operate the unit.
●
This is normal.
●
The setting of the remote control code is inappropriate.
The playback picture is blurred or interrupted while TV
broadcasts are clear or AUSE CLEANING CASSETTEB
message appears on the screen.
] To operate the unit using a JVC TV remote control, set the
remote control code of the unit to A1B (Default: A3B). (A pg. 56)
●
The video heads may be dirty.
Playback (DVD Deck)
The DVD deck cannot be operated.
] Use a dry cleaning cassette M-DV12CL, or consult your JVC
dealer.
●
The DVD deck is not selected.
Recording (DVD Deck)
Recording cannot be made.
] Press DV/HDD/DVD on the unit repeatedly or DVD on the
remote control so that the DVD lamp lights up on the unit.
Images do not appear on the TV screen.
●
No disc or a disc not being compatible with the unit is loaded.
] Load a recordable disc on the unit. (A pg. 7)
The disc loaded is not formatted.
●
The TV receiver’s channel selector is not set to the AV mode.
●
] Set the TV to its AV mode.
] Format the disc. (A pg. 61)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
67
●
Other Problems
] Recording cannot be made on finalized discs. Load a
recordable disc on the unit.
recorded.
The image of the program appears distorted on the TV
screen.
●
For basic connection
] Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights off on the front display panel.
] Clear unnecessary titles on the disc or load a blank disc.
(A pg. 40)
●
The DVD-RAM disc loaded has had its protect tab slid to the
protect position.
For component video connection
] Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights up on the front display panel.
] Release the protect tab. (A pg. 10)
Recording (HDD Deck)
Camcorder recording is not possible.
Whistling or howling is heard from the TV during camcorder
recording.
●
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
The input mode is not correct.
●
The camcorder’s microphone is too close to the TV.
] Position the camcorder so its microphone is away from the TV.
The TV’s volume is too high.
●
●
] Set the input mode to AF-1B. (A pg. 51)
] Turn the TV’s volume down.
Recording (DV Deck)
The AV input cannot be changed.
●
Recording or RetroActive Recording* is in progress.
During recording, the tape does not run. The DV recording
lamp lights up on the unit.
] Press W to pause recording, change the AV input, then press I
to resume recording.
* HDD deck only .
●
The unit is in the Record Pause mode.
] Press I to resume recording.
Malfunction occurs and the unit cannot be power off.
Recording cannot be done.
] Reset the unit by disconnecting the AC power plug from the AC
●
There is no cassette loaded, or the cassette loaded has had its
erase protection switch set to ASAVEB.
outlet and connect again.
] Insert a Mini DV cassette, or set the erase protection switch set
Buttons and controls do not function at all.
to ARECB.
●
Mode Lock is activated.
Camcorder recording is not possible.
] Press and hold F1 for more than 5 seconds to cancel Mode
●
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
The input mode is not correct.
Lock. Or disconnect the power cord and connect again.
●
] Set the input mode to AF-1B or ADVB.
The tape is automatically rewound, then the unit is shut off.
●
The end of the tape was reached during recording.
] The program may not have been recorded in its entirety. Next
time make sure you have enough time on the tape to record the
entire program.
Audio dubbing is not possible.
●
ADV AUDIO RECB had been set to A16BITB at the original
recording.
] Set ADV AUDIO RECB to A12BITB at the original recording.
●
The tape speed had been set to LP at the original recording.
] Set the tape speed to SP at the original recording.
Monitoring the audio dubbed sound is not possible during
audio dubbing.
] This is normal. Monitor the sound using the connected devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
68
COULD NOT FORMAT THE DISC
CHECK THE DISC
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 11, 61)
● A disc that is not registered in the library has been inserted.
Register the disc as necessary. (A pg. 43)
CAN NOT FINALIZE THIS DISC
damaged. Take out the disc, clean it and retry. (A pg. 11, 62)
TITLE MEMORY IS FULL, UNABLE TO RECORD
DELETE UNWANTED TITLE
CAN NOT CANCEL FINALIZATION OF THIS DISC
● The number of titles exceeds 99.
● The number of play lists exceeds 99.
● Canceling disc finalization is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (A pg. 11,
63)
DISC NOT LOADED
PRESS [o] AGAIN TO STOP RECORDING
loaded upside down. (A pg. 10)
● During Live Memory playback, o has been pressed. (A pg. 36).
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
COPY PROHIBITED
CAN NOT RECORD
been pressed. (A pg. 7)
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible.
REGION CODE ERROR
CHECK DISC
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY
AND POWERED ON
number of the disc does not match that of the unit. (A pg. 8)
UNREADABLE DISC
CHECK THE DISC
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (A pg. 49)
● When an incompatible disc is loaded, I has been pressed.
(A pg. 8)
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
EN
69
Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
Afar
IN
Indonesian
Icelandic
Hebrew
RU
RW
SA
SD
SG
SH
SI
Russian
Kinyarwanda
Sanskrit
Sindhi
Abkhazian
Afrikaans
Ameharic
Arabic
IS
IW
JI
Yiddish
JW
KA
KK
KL
Javanese
Georgian
Kazakh
Sangho
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Serbo-Croatian
Singhalese
Slovak
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
KM
KN
KO
KS
KU
KY
LA
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Bislama
Bengali, Bangla
Tibetan
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
Kirghiz
Latin
Breton
LN
LO
LT
Lingala
Catalan
Corsican
Czech
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
LV
Welsh
MG
MI
TE
TG
TH
TI
Telugu
Bhutani
Greek
Tajik
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
OC
OM
OR
PA
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Thai
Esperanto
Estonian
Basque
Persian
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
TK
TL
TN
TO
TR
TS
TT
FJ
Fiji
Malay (MAY)
Maltese
FO
FY
GA
GD
GL
GN
GU
HA
HI
Faroese
Frisian
Turkish
Tsonga
Tatar
Burmese
Nauru
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Nepali
TW
UK
UR
UZ
VI
Twi
Occitan
Ukrainian
Urdu
(Afan) Oromo
Oriya
Uzbek
Panjabi
Vietnamese
Volapuk
Wolof
Hindi
PL
Polish
VO
WO
XH
YO
ZH
ZU
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
PS
PT
QU
RM
RN
RO
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Xhosa
Yoruba
Chinese
Zulu
IE
IK
Rumanian
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
70
GENERAL
VIDEO/AUDIO (HDD Deck)
Power requirement
AC 120 VH, 60 Hz
Video recording compression system
MPEG2 (VBR)
Power consumption
Power on: 45 W
Power off: 2.5 W
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Laser specification
For CD
Wavelength: 770 to 810 nm
Output: 0.4 mW
For DVD
Recording time
Maximum 71 hours (with 40 GB HDD)
(XP): Approx. 8 hours
(SP): Approx. 16 hours
(LP): Approx. 33 hours
(EP): Approx. 49 hours
(FR): Approx. 71 hours
Wavelength: 653 to 663 nm
Output: 1.0 mW
Temperature
Operating: 5f to 35f (41°F to 95°F)
Storage: –20f to 60f (–4°F to 140°F)
VIDEO/AUDIO (DV Deck)
Signal system
Operating position
Horizontal only
NTSC color signal and EIA monochrome signal, 525 lines/60 fields
Recording system
Digital Component Recording
Dimensions (WxHxD)
435 mm x 96 mm x 372 mm (17-1/10" x 3-4/5" x 14-3/5")
Format
DV format (SD mode)
Weight
5.8 kg (12.9 lbs)
Cassette
Mini DV Cassette
Input/Output
Video input: 0.5 - 2.0 Vp-p, 75 K (pin jack)
Video output: 1 Vp-p, 75 K (BNC)
Audio input:
Maximum recording time
(SP): 80 min. with M-DV80ME cassette
(LP): 120 min. with M-DV80ME cassette
–8 dB, 50 kK (pin jack)
Corresponding to mono (left)
Audio output: –8 dB, 1 kK (pin jack)
S-video input:
Audio recording system
PCM 48 kHz, 16 bit (2 ch)/
32 kHz, 12 bit (4 ch)
Y: 0.8 - 1.2 Vp-p, 75 K
C: 0.2 - 0.4 Vp-p, 75 K
S-video output:
Specifications shown are for SP mode unless otherwise specified.
Y: 1.0 Vp-p, 75 K
C: 0.3 Vp-p, 75 K
ACCESSORIES
Provided accessories
Audio/Video cable,
Infrared remote control unit,
AAAB battery x 2
DV: 4-pin for DV IN/OUT
Remote Input: R3.5 mm Jack
Component video output:
Y: 1.0 Vp-p, 75 K
CB/CR, PB/PR: 0.7 Vp-p, 75 K
Corresponding to copy protection
Digital audio output:
E.& O.E. Design and specifications subject to change without
notice.
Optical, Coaxial
Corresponding to Dolby Digital and DTS Digital Surround
Bit stream
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch
the unit off and unplug the AC power cord. Then plug it in again
and turn the unit on. Take out the disc. After checking the disc,
operate the unit as usual.
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording time
Maximum 8 hours (with 4.7 GB disc)
(XP): Approx. 1 hour
(SP): Approx. 2 hours
(LP): Approx. 4 hours
(EP): Approx. 6 hours
(FR): Approx. 1 hour - 8 hours
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system
MPEG2 (CBR/VBR)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF TERMS
EN
71
A
P
A-B Repeat Playback ................................................ 28
Accidental erasure prevention .................................... 33
Adjusting The Picture Quality ..................................... 29
Audio Language/Sound Selection ............................... 26
Auto Full Repeat Playback ........................................ 62
Pan&Scan ................................................................ 21
Play List Editing ........................................................ 41
Playback Control (PBC) ............................................. 26
Program Playback .................................................... 30
Progressive scan ...................................................... 65
R
Recordable/Playable Discs .......................................... 7
Region Number .......................................................... 8
Register Disc ............................................................ 43
Resuming Playback .................................................. 37
RetroActive Recording .............................................. 37
B
Basic Playback .............................................. 22, 31, 33
D
Disc menu ............................................................... 23
Disc Resume ........................................................... 59
Discs For Playback Only ............................................. 8
DVCAM ................................................................... 33
DVD menu ............................................................... 23
F
S
File Structure Of Discs ................................................ 9
Free Rate Function ................................................... 50
Setting The Progressive Mode ................................... 30
Simultaneous Recording and Playback ....................... 37
Subtitle Selection ...................................................... 26
I
Instant Replay ......................................... 24, 32, 34, 37
Interlaced scan ......................................................... 65
J
Jump Search .......................................................24, 32
L
Language Code List .................................................. 69
Last Function Memory ............................................... 65
Letter Box ................................................................ 21
Live Memory Playback .............................................. 35
Time Search ............................................................ 29
Top menu ................................................................ 23
M
Marking Positions To Play Back Again Later ...........25, 32
Menu/Audio/Subtitle Language Set ............................. 20
Mode Lock ............................................................... 65
U
N
Next Function Memory .............................................. 34
V
Variable Speed Search ...................................23, 31, 34
O
On-screen Bar .......................................................... 27
On-screen Language Set .......................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in China
0906MNH-SW-BJ
US
© 2006 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|