DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XV28S
PAL
INSTRUCTIONS
EN
LPT1056-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from External Components. . . . . . . . . .27
Playback Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .28
• Moving to another CHAPTER / TRACK . . . . .28
• Still Picture and Frame-by-Frame Playback . .29
• Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
• Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .29
• Marker Search . . . . . . . . . . . . . . . . . . . . . . . .29
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . .29
• Changing the Audio Channel . . . . . . . . . . . . .30
• Last Scene Memory . . . . . . . . . . . . . . . . . . . .30
• Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Operation with Audio CD and MP3 Disc . . . . . . . . .31
On-Screen Display - DVD . . . . . . . . . . . . . . . . . . .31
Playing an Audio CD or MP3 Disc . . . . . . . . . . . 32-34
Audio CD and MP3 Disc Features . . . . . . . . . . . .33
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
• Repeat Track / All / Off . . . . . . . . . . . . . . . . . .33
• Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
• Random . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Programmed Playback . . . . . . . . . . . . . . . . . . . . .34
• Erasing a Track from “Program” List . . . . . . . .34
• Erasing the Complete Program List . . . . . . . .34
Viewing a JPEG Disc. . . . . . . . . . . . . . . . . . . . . . . . .35
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Moving to another File . . . . . . . . . . . . . . . . . . . . . .35
Introduction
Selecting the Viewing Source . . . . . . . . . . . . . . . . 5
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
To set the colour system . . . . . . . . . . . . . . . . . . . 13
Tuning in TV Stations Manually . . . . . . . . . . . . . . 15
Changing the order of TV Stations . . . . . . . . . . . . . . 16
Before Operation-DVD part . . . . . . . . . . . . . . . . .17-19
General Operation . . . . . . . . . . . . . . . . . . . . . . . . 17
• Menu Language. . . . . . . . . . . . . . . . . . . . . . . 17
• Disc Audio / Subtitle / Menu. . . . . . . . . . . . . . 17
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . 17
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
• Dolby Digital / DTS / MPEG. . . . . . . . . . . . . . 18
• DRC (Dynamic Range Control) . . . . . . . . . . . 18
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . 19
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Language and Area Code List . . . . . . . . . . . . . . . . .36
Language Code List. . . . . . . . . . . . . . . . . . . . . . . .36
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 37-38
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Timer recording using On Screen Display . . . .23-24
Additional Operation - VCR part. . . . . . . . . . . . .25-27
Hi-Fi Stereo Sound System (NIC) . . . . . . . . . . . . 25
On Screen Display (F.OSD) . . . . . . . . . . . . . . . . 25
Tape Counter Memory Stop . . . . . . . . . . . . . . . . 25
Video Doctor (Self-Diagnosis) . . . . . . . . . . . . . . . 26
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Note: Indicates special operating features of this unit.
Tip: Indicates tips and hints for making the task easier.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Track (Video CD and audio CD only)
Playable Discs
Sections of a picture or a musical piece on a video CD or
an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
DVD
(8 cm / 12 cm disc)
Scene
Video CD (VCD)
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into
sections called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play SVCD, DVD R/RW and
CD-R/RW that contains audio titles, MP3 or JPEG files.
A scene is composed of one or several tracks.
Notes:
Types of video CDs
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs cannot
be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in the
disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs may
be intentionally programmed by software manufacturers.
This unit plays DVDs and Video CDs according to disc
content designed by the software manufacturer,
therefore some playback features may not be available or
other functions may be added.
Remote Control Operation Range
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured for
playback of region “2” encoded DVD software.
The region code on the labels of some DVD
discs indicates which type of player can play
Point the remote control at the remote sensor and press
the buttons.
• Distance: About 23 ft (7 m) from the front of the
remote sensor
• Angle: About 30° in each direction of the front of the
remote sensor
2
those discs. This unit can play only DVD discs
labeled “2” or “ALL”. If you try to play any
other discs, the message “Check Regional Code” will
appear on the TV screen. Some DVD discs may not have
a region code label even though their playback is
prohibited by area limits.
Remote control battery installation
Detach the battery cover on the rear of the
remote control, and insert two (R03/AAA)
size batteries with + and - aligned
correctly.
Disc-related terms
Caution
Title (DVD only)
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
The main film content or accompanying feature content
or additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters.
Each chapter is assigned a chapter number, enable you
to locate the chapter you want. Depending on the disc,
chapters may not be recorded.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Precautions
Cleaning discs
Fingerprints and dust on the disc can cause poor picture
quality and sound distortion. Before playing, clean the
disc with a clean cloth. Wipe the disc from the center out.
Handling the unit
When shipping the unit
The original shipping carton and packing materials come
in handy. For maximum protection, re-pack the unit as it
was originally packed at the factory.
When setting the unit
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio, or turn off the unit after
removing the disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
About Symbols
About the
symbol display
Cleaning the unit
“
” may appear on the TV screen during operation.
To clean the cabinet
This icon means the function explained in this owner’s
manual is not permitted by the DVD+VCR or is not
available on that specific DVD video disc.
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About the disc symbols for instructions
To obtain a clear picture
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
DVD
VCD
CD
DVD
Video CDs.
Audio CDs.
MP3 disc.
JPEG disc.
MP3
JPEG
For details, please contact your nearest dealer.
Notes on Discs
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get
on the surface.
• If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window lights
and output source of DVD deck is viewed on the TV screen.
• If you want to view VCR deck output source:
Do not stick paper or tape on the disc.
Press VCR until VCR indicator in the display window lights
and output source of VCR deck is viewed on the TV screen.
Notes:
• If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode
automatically.
• If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable temperature
increase inside the car.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Disc Tray (DVD deck)
Insert a disc here.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Remote Sensor
Point the DVD+VCR remote control here.
Display Windows
< OPEN/CLOSE
Opens or closes the disc tray.
;
Pause playback or recording. Press
repeatedly for frame-by-frame playback.
∫
Stops playback of the disc or tape.
< EJECT
Ejects the tape in the VCR deck.
PROG. (-/+)
To scan up or down through memorized channels.
5
- DVD: Skip to next chapter or track. Press and hold for two
seconds for a fast forward search.
- VCR: Advances the tape during the STOP mode or for fast
forward picture search.
¥
To record normally or to activate
One-touch Timer Recording by
repeated presses.
1
Starts playback of a disc or tape.
6
- DVD: Skip to beginning of current chapter or track, press twice in quick
successions to go to previous chapter or track. Press and hold button for
about two seconds to search backward.
- VCR: Rewinds the tape during the stop mode or for fast reverse picture
search.
VCR/DVD
Select one of your output sources to view on the TV
screen between DVD and VCR.
Video IN Jack
Audio IN (L/R) Jacks
Í/I
Switches the DVD+VCR ON and STANDBY.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
The DVD deck is selected.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
Indicates repeat mode.
DVD+VCR is in timer recording or a timer
recording is programmed. (VCR part only)
A cassette is in the VCR deck.
The VCR deck is selected.
Lights when TV mode is active.
DVD+VCR is Recording.
(VCR part only)
Indicates total playing time, elapsed time, remaining time or
current deck status (Playback, Pause, etc).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
OPEN/CLOSE, EJECT (<)
- Ejects the tape in the VCR deck.
- Opens and closes the disc tray.
Í/I
Switches DVD+VCR ON and STANDBY
.
TV/VCR •
To view channels selected by the VCR
tuner or by the TV tuner.
AUX
Select input source for recording into
tape.
DVD •
Select the DVD+VCR function mode to
DVD.
DISC MENU
Accesses menu on a DVD disc.
SKIP (:/9)
VCR •
Select the DVD+VCR function mode to
VCR.
Skip to beginning of current chapter or
track, press twice in quick successions
to go to previous chapter or track.
Skip to next chapter or track.
DISPLAY
- - : - -
- Accesses On-Screen Display (DVD).
- Shows you the current time or counter
(VCR).
RETURN
- Removes the setup menu.
- Displays the menu of a video CD with
PBC.
2/1/3/4
- Selects menu options.
- PR/TRK (+/-): Selects VCR channels.
Adjusts manually the tape’s picture on
the screen.
∫
Stops playback or recording.
MNL. PROG.
Places a track on the program list.
SETUP/MENU (i)
Accesses or removes DVD Setup
menu and VCR menu.
CLEAR (
)
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
ENTER/OK
Confirms menu selections. Displays
functions on the TV screen.
• A.MONITOR
Selects an audio language (DVD) or an
audio channel (VCD).
;
- Pause playback or recording.
- Press repeatedly for frame-by-frame
playback.
• SUBTITLE
Selects a subtitle language.
• ANGLE
(6) •
- For fast reverse picture search.
- Rewinds the tape during the STOP
mode.
Selects a DVD camera angle, if
available.
• ZOOM
Enlarges DVD video image.
1
•
Starts playback.
• MARKER
Marks any point during playback.
(5) •
- For fast forward picture search.
- Advances the tape during the STOP
mode.
• SEARCH
Displays Marker Search menu.
• TITLE
Displays the disc’s Title menu, if
available.
0-9 numerical buttons
Selects numbered options in a menu.
REPEAT •
• REC (¥)
Records normally or activates One
touch Timer Recording with repeated
presses.
Repeat chapter, track, title or all.
RANDOM (
) •
- Plays tracks in random order.
- CM SKIP
REPEAT A-B •
Repeats sequence between two points
(A and B)
•
Selects recording speed.
SHOWVIEW •
To display the programme menu for
ShowView programming.
Note:
This remote control uses the same buttons for VCR and
DVD functions (ex. PLAY).
When using a VCR, first press the VCR button.
When using a DVD, first press the DVD button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
AERIAL
Connect the aerial using this jack.
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)
Connect to an amplifier, receiver or stereo system.
EURO AV2 DECODER (VCR IN+OUT/DVD OUT)
Connect to pay-TV decoder, Set Top Box or another
video recorder.
AC Power Cord
Connect to a power source.
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
COAXIAL (DVD EXCLUSIVE OUT)
(Digital audio out jack)
Connect to digital (coaxial) audio equipment.
RF.OUT
Connect to your TV using this jack.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Connections
When the equipment is installed in a cabinet or a shelf, make
sure that it has sufficient space on all sides to allow for
ventilation (10 cm or more on both sides, on top and at the rear).
Tips:
• Depending on your TV and other equipment there are
various ways you can connect the player.
• Please refer to the manuals of your TV, VCR, stereo
system or other devices as necessary for additional
connection information.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc.
1. DO NOT place the unit —
Notes:
• The picture and sound of a nearby TV, VCR, or radio may be
distorted during playback. Position the units away from each
other or turn off the unit after removing the disc.
• Make sure the DVD+VCR is connected directly to the TV and
tune the TV to the correct video input channel.
• Do not connect the DVD+VCR’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system. Do not
connect the DVD+VCR via another VCR. The DVD image
could be distorted by the copy protection system.
— in an environment prone to extreme temperatures or
humidity.
— in direct sunlight.
— in a dusty environment.
— in an environment where strong magnetic fields are
generated.
— on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get
out.)
3. DO NOT place heavy objects on the unit or remote
Connecting to a TV
control.
4. DO NOT place anything which might spill on top of the
unit or remote control.
Make one of the following connections, depending on the
capabilities of your existing equipment.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places
with water. Also DO NOT place any containers filled with
water or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
Basic connection (AV)
1. Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead (not supplied).
For TV without SCART, connect the yellow VIDEO
OUT jack and DVD/VCR AUDIO OUT jacks of this
unit to the TV.
8. AVOID violent shocks to the unit during transport.
2. Some TV broadcasters transmit encoded television
signals which you can only see with a purchased or
rented decoder. You can connect such a decoder
(descrambler) to this unit.
Basic connection (RF)
1. Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
this unit.
2. Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television’s Antenna Input.
Rear of TV
AERIAL
VIDEO IN
AUDIO INPUT
SCART INPUT
L
R
Satellite or Set Top Box
Rear of this unit (Basic connection)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Notes:
Connecting to Optional
Equipment
• If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
• Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
• To see the audio format of the current DVD in the On-
Screen Display, press A.MONITOR.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and Right DVD/VCR AUDIO OUT or
AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional digital (coaxial) audio
cable.
2. You will need to activate this unit’s digital output.
(See “AUDIO” on page 18).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel Audio/
Video receiver that supports one or more of the audio
formats supported by your unit (MPEG 2, Dolby Digital
and DTS). Check the receiver manual and the logos on
the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of this unit
2 channel analog stereo or Dolby Surround connection.
Digital multi-channel
DVD exclusive out
connection
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
7. Use PROG. (+/-) to select another video channel.
You may select any channel number between 22 and
68.
Tuning in a video channel on your TV
Notes:
• The output frequency of this DVD+VCR is set at UHF
channel 36. If channel 36 is already used by another
TV station, or if the picture is distorted, you can
change the transmitter channel of your DVD+VCR.
Stages 5 ~ 8 will show you how to change the output
frequency of your DVD+VCR.
• Your TV receives signals from the DVD+VCR like
another TV station. You have to select a channel
number on your TV and tune it in so that you may
watch video tapes. If you have used a SCART then
your TV should already have a dedicated video
channel built into it, usually called AV.
8. Select a TV channel which you wish to watch video.
Press Í/I on the front of your DVD+VCR when you
have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel on your TV.
Notes:
Make sure that you have correctly installed your DVD+VCR and
successfully tuned in a dedicated video channel on your TV. If
you do not tune in a dedicated video channel on your TV you will
be unable to view and record video tapes!
1. Make sure that you have correctly installed your
DVD+VCR as described earlier in this book.
Press Í/I to turn on your DVD+VCR.
Turn on your TV.
Initial preset
For the following steps we do assume that you have just
connected your video recorder for the very first time. In
this case the video recorder is on after mains connection.
You should not touch any buttons yet. On the connected
TV you will now see.
2. Insert a pre-recorded video tape into your DVD+VCR
and press
1
on the remote control.
Select a TV channel which you wish to watch video.
Don’t worry if you don’t have a video-tape to play at
this stage! If you switch your DVD+VCR on and
continue stages 3 ~ 4, instead of seeing video
playback tune your TV until you see a bright blue
screen.
Note:
If this menu does not appear, your video recorder was
programmed already.
1. Select the country according to your area with 2
and 1.
3. Tune this channel until the video picture is sharp and
the sound is clear.
“A”: Austria, “B”: Belgium, “CH”: Switzerland, “D”:
Germany, “DK”: Denmark, “E”: Spain, “F”: France,
“I”: Italy, “N”: Norway, “NL”: Netherlands, “P”:
Portugal, “S”: Sweden, “SF”: Finland, “OTHERS”
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned for optimum video playback on your TV.
4. Store this channel on your TV.
You will need to look at the TV instruction book if you
do not know how to do this.
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
Pr-12
OK
i
5. Only carry out stages 5 ~ 8 if you cannot obtain
clear video playback as described in stages 1 ~
4.
ACMS
2. Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
Select a TV channel which you wish to watch video.
Make sure that your DVD+VCR is in standby
pressing Í/I on the remote control (only the clock
will be displayed).
6. Press PROG. (+/-) on the front of your DVD+VCR for
more than 4 seconds.
S
E
Pr-12
i
ACMS
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
3. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
RF CHANNEL 36
P
SET
i
R
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
Setting the clock Manually
To set the colour system
1. Press i.
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
2. The main menu will appear on the TV screen.
1. Press i.
3. Press 2 or 1 to select the SYS and press ENTER/
OK.
Press 2 or 1 to select SET.
Press ENTER/OK.
The auto adjust mode can be set to “OFF” by
pressing ENTER/OK if you want to set the time
manually.
4. Press 3 or 4 to select according to the COLOUR
system used.
AUTO
PAL
HH MN DD MM YY
SYS
MESECAM
SYS
:
-
-
.
.
- - - - -
- -
- -
- -
f
OSD
ON
OFF
i
1
2
i
SET
5. Press 2 or 1 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
2. Use the 3 or 4 on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
RF I/I
RF B/G
SYS
RF D/K
SYS
3. If you make a mistake press 2 or 1 and enter the
f
OSD
ON
OFF
i
correct details.
6. Press i to remove the menus from the TV screen.
HH MN DD MM YY
8
:
00
1
.
01
.
05 SAT
1
2
i
SET
4. Press i to return to a TV picture.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
How to use the main menu
Tuning in TV Stations
Automatically
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome
this problem please turn to the MANUAL TUNING
section on page 15.
1. Switch on your TV set and DVD+VCR by pressing
the Í/I button.
2. Press i button.
1. Press Í/I to turn on your DVD+VCR.
The main menu will appear on the TV screen.
2. Press i button.
The main menu will appear on the TV screen.
Press 2 or 1 to select the ACMS.
Press ENTER/OK.
1
2
SET SYS
f
OSD
ON
OFF
• REC - Timer recording setting (see p. 23).
• PR SET - Manual tuning setting (see p. 15).
System) (see p. 14).
1
2
Pr-12
ACMS SET SYS
Pr-12
ACMS
f
OSD
ON
OFF
OK
i
• SYS - To set the Colour TV System (see p. 13).
•
p. 26).
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
of your VCR (see p. 25).
Pr-12
ACMS
OK
i
•
TV (see p. 26).
3. Select the country according to your area with 2 or
1.
• DECODER - To use a pay-TV decoder (or
A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Netherlands, P:Portugal, S:Sweden,
SF:Finland, “OTHERS”
•
(OPR) - To improve the playback picture (see p.
20).
Appear when playback only.
• NIC - To activate or deactivate the NICAM digital
sound (see p. 25).
4. Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
Tip:
5. The TV STATION TABLE will appear when tuning is
completed.
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 17.)
Press i to save your settings.
3. Press 2 and 1 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
01
02
03
04
05
06
07
08
C01
C02
C03
- -
- -
- -
00
00
00
- -
- -
- -
- -
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
4. Press i to return to a TV picture.
- -
- -
DELETE :
P
SET
,
OK
i
R
Notes:
The DVD+VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock Manually” on page 13.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your DVD+VCR’s automatic
tuning process to find or assign TV stations
correctly.
PR
04
CH
C04
MFT
00
STATION
CHANNEL/CABLE : AV
P
i
SET
R
You must tune in these weaker broadcast stations
manually in order for your DVD+VCR to store them.
6. Press 1 to select STATION so that you may name
your TV station.
Press OK.
1. Press i.
7. Use 3 or 4 to select letters and numbers for the
The main menu will appear on the TV screen.
Press 2 or 1 to select the PR SET.
Press OK.
station name.
Use 2 or 1 to move back and forth between
characters.
Press OK.
1
2
Pr-12
P
ACMS
SET
SET SYS
R
P
SET
R
PR
04
CH
C04
MFT
00
f
STATION
-
OSD
ON
OFF
P
SET
OK
i
R
8. Press i, confirm the station placement.
PR
01
CH
C03
MFT
00
STATION
PR-03
CHANNEL/CABLE : AV
P
SET
i
R
PR
04 C04
CH
MFT
00
STATION
PR-04
2. Press i.
The station table will appear.
P
SET
OK
i
R
3. Press 3 or 4 to select the programme number that
If you wish to manually tune other stations repeat
stages 3 - 8.
you want to tune (for example, PR 04).
01
02
03
04
05
06
07
08
C01
C02
C03
- -
- -
- -
00
00
00
- -
- -
- -
- -
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
01
02
03
04
05
06
07
08
C01
C02
C03
C04
- -
- -
- -
- -
00
00
00
00
- -
- -
- -
- -
PR-00
PR-02
PR-03
PR-04
- - - - -
- - - - -
- - - - -
- - - - -
- -
- -
MOVE :
DELETE :
P
SET
,
OK
i
R
MOVE :
DELETE :
P
SET
,
OK
i
R
4. Press OK.
9. Press i again.
Press AUX to select C (Standard stations) or S
(Cable stations):
C02 - C69, S01 - S41.
Your new TV station has now been tuned into your
DVD+VCR.
Enter the channel number of station that you want to
tune, use 3 or 4 to find the required station.
PR
04
CH
C - -
MFT
- -
STATION
- - - -
CHANNEL/CABLE : AV
P
SET
i
R
5. Searching will stop when it locates a stations.
Press 1 to select MFT.
Control the fine tuning of the station by using 3 or
4.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
Changing the order of TV Stations
Deleting TV Stations
After tuning TV stations into your DVD+VCR you
may wish to change the order in which they are
stored without having to retune them again. The
instructions given on this page will show you how
you can simply move them into your desired order.
After tuning TV stations into your DVD+VCR you
may wish to delete a station.
The instructions given on this page will show you
how you can easily delete any unwanted TV
stations.
1. Press i.
1. Press i.
The main menu will appear on the TV screen.
Press 2 or 1 to select the PR SET.
Press ENTER/OK.
The main menu will appear on the TV screen.
Use 2 or 1 to select the PR SET.
Press ENTER/OK.
PR
01
CH
C03
MFT
00
STATION
PR-03
PR
01
CH
C03
MFT
00
STATION
PR-03
1
2
1
2
Pr-12
Pr-12
P
P
SET
R
ACMS
ACMS
SET
SET SYS
SET SYS
R
P
P
SET
R
SET
R
f
f
OSD
ON
OFF
OSD
ON
OFF
CHANNEL/CABLE : AV
CHANNEL/CABLE : AV
P
P
SET
R
SET
i
i
R
2. Press i.
2. Press i.
Press 3 or 4 to select the programme number
you want to move (for example, PR-03).
Press 1.
3. Press 3 or 4 to select the programme number
you want to delete. (for example, PR-00)
01
02
03
04
05
06
07
08
C01
C02
C04
- -
C03
- -
00
00
00
- -
00
- -
- -
- -
PR-00
PR-02
PR-04
- - - - -
PR-03
- - - - -
- - - - -
- - - - -
01
02
03
04
05
06
07
08
C01
C02
C03
C04
- -
- -
- -
- -
00
00
00
00
- -
- -
- -
- -
PR-00
PR-02
PR-03
PR-04
- - - - -
- - - - -
- - - - -
- - - - -
01
02
03
04
05
06
07
08
C01
C02
C03
C04
- -
- -
- -
- -
00
00
00
00
- -
- -
- -
- -
PR-00
PR-02
PR-03
PR-04
- - - - -
- - - - -
- - - - -
- - - - -
- -
- -
MOVE :
DELETE :
P
MOVE :
DELETE :
,
OK
i
SET
R
P
OK
i
P
SET
,
OK
i
SET
R
R
4. Press 2.
3. Press 3 or 4 to select the programme number
After a short while, the selected station will be
deleted.
you want to move to (for example, PR-05).
If you wish to delete other TV stations repeat stages
3 - 4.
01
02
03
04
05
06
07
08
C01
C02
C04
- -
C03
- -
00
00
00
- -
00
- -
- -
- -
PR-00
PR-02
PR-04
- - - - -
PR-03
- - - - -
- - - - -
- - - - -
01
02
03
04
05
06
07
08
C01
C02
- -
C03
- -
- -
- -
- -
00
00
- -
00
- -
- -
- -
- -
PR-02
PR-04
- - - - -
PR-03
- - - - -
- - - - -
- - - - -
- - - - -
- -
- -
OK
i
P
SET
R
4. Press ENTER/OK.
MOVE :
DELETE :
P
,
OK
i
SET
R
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages
5. Press i to remove the menus from the TV screen.
1 - 4.
01
02
03
04
05
06
07
08
C01
C02
C04
- -
C03
- -
00
00
00
- -
00
- -
- -
- -
PR-00
PR-02
PR-04
- - - - -
PR-03
- - - - -
- - - - -
- - - - -
- -
- -
MOVE :
DELETE :
P
,
OK
i
SET
R
5. Press i to remove the menus from the TV screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-DVD part
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see pages 17 to 19.
LANGUAGE
LANGUAGE
English
Original
Off
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
To display and exit the Menu:
Original
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press 1 on the remote control.
Move
Select
To go back to the previous level:
Press 2 on the remote control.
Menu Language
Select a language for the VCR and DVD’s setup menu
and information display.
General Operation
DVD
Disc Audio / Subtitle / Menu
1. Press DVD on the remote control.
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
2. Press SETUP.
The Setup menu appears.
3. Use 3/4 to select the desired option then press 1
to move to the second level. The screen shows the
current setting for the selected item, as well as
alternate setting(s).
disc was recorded.
Other: To select another language, press number
buttons then ENTER/OK to enter the corresponding 4-
digit number according to the language code list in the
reference chapter (see page 36). If you enter the wrong
4. Use 3/4 to select the second desired option then
press 1 to move to the third level.
language code, press CLEAR (
).
5. Use 3/4 to select the desired setting then press
ENTER/OK to confirm your selection. Some items
require additional steps.
Off (for Disc Subtitle): Turn off Subtitle.
DISPLAY
6. Press SETUP or
1
exit the Setup menu.
DISPLAY
TV Aspect
16
:
9 Wide
Display Mode
Widescreen
Move
Select
DVD
TV Aspect
4:3 :
Select when a standard 4:3 TV is connected.
Select when a 16:9 wide TV is connected.
16:9 :
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-DVD part
AUDIO
OTHERS
Each DVD disc has a variety of audio output options.
Set this unit’s AUDIO options according to the type of
audio system you use.
The PBC and Auto Play settings can be changed.
OTHERS
PBC
On
Off
AUDIO
Auto Play
Dolby Digital
DTS
Bitstream
Bitstream
PCM
MPEG
Sample Freq.
DRC
48KHz
On
Select
Move
Move
Select
VCD
PBC
Set Playback Control (PBC) to On or Off.
DVD
Dolby Digital / DTS / MPEG
On: Video CDs with PBC are played according to the
PBC.
Bitstream: Select “Bitstream” if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
Off: Video CDs with PBC are played the same way as
Audio CDs.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
DVD
Auto Play
You can set up the DVD+VCR so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will search
for title that has the longest playback time and then play
back the title automatically.
Off (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL AUDIO OUT jack.
DVD
Sample Freq. (Frequency)
On: Auto Play function is active.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is made,
this unit automatically converts any 96 kHz signals to 48
kHz so your system can decode them.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
If your receiver or amplifier is capable of handling 96 kHz
signals, select 96 kHz. When this choice is made, this
unit passes each type of signal through without any
further processing.
Check the documentation for your amplifier to verify its
capabilities.
DVD
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic range
of the audio output (the difference between the loudest
sounds and the quietest ones). This allows you to listen
to a movie at a lower volume without losing clarity of
sound. Set DRC to On for this effect.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-DVD part
LOCK (Parental Control)
LOCK
Password (Security Code)
You can enter or change password.
1. Select “Password” on the LOCK menu then press 1.
Rating
Unlock
New
2. Follow step 2 as shown left column (Rating).
To change the password, select the “Change”, press
ENTER/OK and input the new 4-digit code then
press ENTER/OK. Input it again to verify.
Password
Area Code
DG
3. Press SETUP to exit the menu.
Move
Select
If you forget your Security Code
DVD
Rating
If you forget your security code you can clear it using
the following steps:
Some movies contain scenes that may not be suitable for
children to view. Many of these discs contain parental
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the area.
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the
security code is cleared.
DVD video discs may or may not respond to the parental
control setting if the Area code of the disc is set wrongly.
Some discs offer more suitable scenes as an alternative.
Ratings are area dependent.
3. Enter a new code as described above.
DVD
Area Code
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you believe
is unsuitable.
Enter the Area Code whose standards were used to rate
the DVD video disc, based on the list in the reference
chapter (see page 36).
1. Select “Area Code” on the LOCK menu then press
1. Select “Rating” on the LOCK menu then press 1.
1.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code you
created.
2. Follow step 2 as shown left (Rating).
3. Select the first character using 3/4 buttons.
4. Press 1 and select the second character using 3/
4 buttons.
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code and press
ENTER/OK. Enter it again and press ENTER/OK to
verify. If you make a mistake before pressing
5. Press ENTER/OK to confirm your area code
selection.
ENTER/OK, press CLEAR (
).
3. Select a rating from 1 to 8 using the 3/4 buttons.
1-8: Rating one (1) has the most restrictions and
rating eight (8) has the least restrictive.
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
4. Press ENTER/OK to confirm your rating selection,
then press SETUP to exit the menu.
5. Press OPEN/CLOSE (<) to activate parental
control.
Note:
If you set a rating for the player, all disc scenes with the same
rating or lower are played. Higher rated scenes are not played
unless an alternate scene is available on the disc. The
alternative must have the same rating or a lower one. If no
suitable alternative is found, playback stops. You must enter the
4-digit password or change the rating level in order to play the
disc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
Playing a tape
Logic search:
During fast forwarding or rewinding press and hold
6 or 5 the picture will be played back at 7 times
normal playback speed.
You will only be able to load and eject video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC tapes (on PAL TV).
5. Slow motion playback, Shuttle:
During playing back or still picture press 2 or 1.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Getting a better picture
When a cassette is inserted and playback started,
the automatic tracking function works to get the
best possible picture automatically. If the quality of
the recording is poor, repeatedly press 3 or 4 on
the remote control to manually adjust the tracking
until any distortions have been removed.
To switch off the slow motion and shuttle, press the
desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of tape.
If distortions can be seen in the picture, reduce them
with 3 or 4.
1. Make sure that you have correctly connected your
DVD+VCR as described earlier in this book.
Turn on your TV.
6. Press ∫ to end playback.
Press EJECT (<).
Press Í/I to turn on your DVD+VCR.
If the end of the tape is reached, your DVD+VCR will
stop playback automatically, rewind, stop, eject the
tape.
Insert the video cassette into your DVD+VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2. Press
1
to start playing your tape.
CM (Commercial Message) Skip:
If you load a video cassette which has had its record
protection tab removed, playback of the cassette will
start automatically.
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal playback.
While tape is playing press
skip commercial (or another programme material).
on the remote control to
AUTO TRACKING
Your DVD+VCR will automatically adjust the tracking
to give the best picture quality.
Repeatedly press
to skip:
1 Press 30 seconds
2 Press 60 seconds
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
If noise bars appear during playback, adjust the
tracking manually by pressing PR/TRK (+/-).
3. Press ; to still a picture.
Press
;
repeatedly to advance the tape frame by frame.
If you press 5, the picture will be slowed down at
about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to prevent
damaging the tape or your DVD+VCR.
Still picture quality can be improved slightly by using
3 or 4.
OPR (Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD+VCR to the condition of
the tape. Please note that the OPR icon ( ) will only
appear in play that mode when playing a tape.
4. Press
Double speed playback (SP mode only)
Press the “ (X2)” button during normal playback. The
tape will play back at double speed and without sound.
Press the “ (X2)” button to return to playback at
normal speed
1
to continue playing your tape.
1. Press i.
2. Press 2 or 1 to select
3. Press ENTER/OK.
(OPR).
1
1
4. Press 3 or 4 repeatedly to select: OFF, SOFT or
SHARP.
Picture search:
5. Press i return to screen.
During playing back press either 6 or 5 to this
will enable you to rapidly wind the tape (7 times
normal playback) see where you are on the tape.
Notes:
OFF
• When playing back tapes that have been over-
recorded with new content, the original audio may be
audible during auto tracking.
SOFT
Pr-12
P
ACMS
SET
S
SHARP
R
f
OSD
ON
OFF
• The image may be distorted during special playback
in LP mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
7. Press ; to avoid recording unwanted scenes.
Press ; to continue recording.
Instant Timer Recording
Your DVD+VCR allows you to make recordings
using a variety of simple methods:
Tapes can be paused for up to 5 minutes; RECP will
be displayed when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
Instant Timer Recording start recording
immediately for a set period of time or until the
video cassette runs out.
8. Press ∫ to end recording.
Press EJECT (<).
Your DVD+VCR incorporates Long Play (LP) which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360
minutes. Please note there will be a slight loss in
picture and sound quality when using LP.
Notes:
• If you do not wish to record on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
• It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
• Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to select TV mode and then selecting a
different channel on your TV.
1. Make sure that you have correctly connected your
DVD+VCR as described earlier in this book.
Press Í/I to turn on your DVD+VCR.
2. Insert a video cassette with protection tab into your
DVD+VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
3. Press 3 or 4 to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4. If you wish to record directly from the SCART or
RCA jacks, repeatedly press AUX until the socket
you wish to record from is displayed.
AV 1 for recording from EURO AV1 SCART jacks on
the rear of your unit.
AV 2 for recording from EURO AV2 SCART jacks on
the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) jacks on the front of your unit.
5. Press
if you wish to record in Long Play or
Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
time as SP.
6. Press REC (¥) on the remote to start recording.
Press ¥ on your unit or press REC (¥) on the
remote several times. Each successive press will
increase the record time by 30 minutes until you
reach a maximum of 9 hours.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
5. Press 2 or 1 to select the settings that you wish to
revise. (PR, DATE, TIME and SP).
ShowView Programming
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer Recording
by simply entering a ShowView Code. ShowView
Codes are published in most TV guide magazines;
they can vary one to nine numbers in length.
Press 3 or 4 to enter the correct information.
PR
DATE
TIME
PR-01 12
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
SHOWVIEW is a registered trademark of Gemstar
Development Corporation.
i
The SHOWVIEW system is manufactured under
license from Gemstar Development Corporation.
6. Press 1 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP,
IP, or LP).
1. Make sure that TV channels have been tuned and
stored in correct SHOWVIEW order.
Insert a video cassette with protection tab into your
DVD+VCR.
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN
on the front or from either of the EURO SCART
sockets on the back of VCR, press AUX to select for
correct display (AV1, AV2 or AV3).
SHOWVIEW NO.
- - - - - - - - -
0~9, OK
i
REC
PR
DATE
TIME
PR-01 12
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
2. Press SHOWVIEW.
3. Press the numbered buttons to enter the
ShowView Code of the TV programme that you
wish to record.
i
If you make a mistake press 2 then enter the
revised number.
7. If you want to make another ShowView recording
repeat stages 2 - 7.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
SHOWVIEW NO.
246876543
Press Í/I to switch your DVD+VCR power off mode.
will appear in the video recorder’s display while
your VCR waits to make the recording.
To watch a DVD during timer recording standby
mode, press Í/I and DVD to switch to DVD mode.
DELETE :
0~9,
OK
i
REC
4. Press ENTER/OK.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number, entered
the ShowView number incorrectly.
8. Press Í/I to end recording.
If “- -” is displayed, you have to enter the programme
number of the station, you want to record from.
PR
DATE
TIME
PR-01 12
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
i
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
5. Use the 3 or 4 to enter the date of the programme.
Timer recording using On Screen
Display
If you press ENTER/OK before entering the date you
may select one of the following automated recording
features. Press 2 or 1 to select, then press
ENTER/OK to confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
You may set up to seven timer record events within
one month of the current date.
Note:
SU~SA To record at the same time every week.
Before setting the timer make sure that you have
set the DVD+VCR clock correctly and you know
which stations you have tuned TV stations on your
DVD+VCR.
PR
DATE
T
I
M
E
- -: - -~ - -: - -
PR-03
- -
- -
- -
- -
3
- -
- -
- -
- -
- -
- -
SP
- -: - -~ - -: - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -
- -
DLY SU MO TU WE TH FR SA
1. Insert a video cassette with protection tab into your
DVD+VCR.
i
OK
The video cassette should have the window side
facing up and the arrow facing away from you.
6. Use 3/4/2/1buttons to enter the recording start
and end times of the programme that you wish to
record.
2. Press i.
Press 2 or 1 to select REC.
Press ENTER/OK.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
PR
DATE
- -
- -
- -
- -
- -
- -
- -
T
I
M
E
PR
PR-03
- -
- -
- -
- -
- -
- -
DATE
4
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
14:00~ 15:30
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
OK
i
,
DELETE:
i
3. Press ENTER/OK to start setting the timer record
7. Press 1 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP,
IP, or LP).
event.
4. Use the 3 or 4 to enter the station that you wish to
record then press 1.
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
PR
PR-03
- -
- -
- -
- -
- -
- -
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
PR
PR-03
- -
- -
- -
- -
- -
- -
DATE
4
- -
- -
- -
- -
- -
- -
T I M E
14:00~ 15:30
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
i
i
Note:
If all timer record events are full press 3 or 4 to select
the event that you wish to remove and replace.
Press 2 to delete the event.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
Timer recording using On Screen
Display (Continued)
8. Press i to set another timer record event and follow
steps 3 to 8.
Check that the timer event details are correct.
Press i return to screen.
If PLEASE CHECK is displayed, you have entered
incorrectly and will need to re-enter the data.
9. Press Í/I to switch your DVD+VCR to Timer
Standby mode.
The timer symbol ( ) will appear in the display
window while your DVD+VCR waits to make the
recording.
10. Press Í/I to end timer recording.
Notes:
• The DVD+VCR will automatically power off when
Timer Recording ends.
• During timer recording standby mode, the DVD and
VCR mode cannot be operated. To use the
DVD+VCR, press Í/I. After you use the DVD or VCR,
press Í/I again to put the VCR into timer recording
standby mode.
• If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use 3
or 4 to select the event that you wish to delete or
change.
Press 2 to delete the event...or
Press ENTER/OK to change; then press 2 or 1 to
select; Station, Date, Start and End times and
recording speed. Press 3 or 4 to enter the correct
information.
• If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier
programme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme 2
will be recorded.)
• To watch a DVD while performing a timer recording,
press TV/VCR to select VCR mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation - VCR part
Hi-Fi Stereo Sound System (NIC) On Screen Display (F.OSD)
Your DVD+VCR will record and playback Hi-Fi stereo
sound. In addition it has a stereo NICAM digital stereo
sound decoder. This allows you to record and playback
the sound in several different ways. Video cassettes
recorded on your DVD+VCR will have a normal mono
audio track and two VHS Hi-Fi stereo audio tracks.
These stereo tracks allow you to make audio recordings
in Hi-Fi stereo or bilingual mode from a TV broadcast,
stereo audio system, video disc or another Hi-Fi VCR.
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the tape.
1. Press DISPLAY to display.
Press DISPLAY repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
1. Your DVD+VCR’s NICAM digital sound decoder
allows you to enjoy broadcasts with NICAM sound,
as well as standard stereo, bilingual and mono
sound. The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
2. After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press DISPLAY again to remove all displays from
the TV screen.
STEREO NICAM
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
Note:
It cannot display when f.OSD is OFF.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video tape.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the
display window instead of the time by pressing
DISPLAY on the remote control. The Digital Tape
Counter indicates the relative positions of recordings on
the tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
2. Press AUDIO repeatedly until the desired audio
1. Press DISPLAY.
mode appears.
Press CLEAR (
) to set the counter to 0:00:00.
3. The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is
output on the left channel and the secondary
channel is output simultaneously from the right
channel when audio output is set to STEREO. The
primary language will be output from both channels
when the audio setting is MONO.
Press 1 or start playback or recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
2. Press ∫ when playback or recording is complete.
Press 6.
The tape will rewind and automatically stop when the
counter returns to 0:00:00.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
Note:
Note:
To rewind to the beginning of the tape, press 6 again.
When OFF is selected in NIC, only mono sound will be
output.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation - VCR part
Video Doctor (Self-Diagnosis)
2. Press 3/4 repeatedly to select: AUTO, 4:3 or 16:9.
AUTO:
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
Automatically plays back Wide-Screen programmes
as Wide-Screen and Normal programmes as
normal.
4:3:
1. Press i.
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Press 2 or 1 to select
Press ENTER/OK.
.
Only for playing back and recording Wide-Screen
format recordings (16:9).
ANTENNA CONNECT
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
1
2
Pr-12
P
ACMS
SET
SET SYS
R
f
PLEASE CHECK
OSD
ON
OFF
i
1
2
Pr-12
P
A
SET
S
4:3
16:9
AUTO
R
f
2. Press 3 or 4 to check a problem.
OSD
ON
OFF
i
ANTENNA CONNECT
• PLEASE CHECK:
Connect the aerial into the jack securely.
3. Press i to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must connect
your VCR to the TV using a SCART cable.
HEAD STATUS
• PLEASE CLEAN:
Clean your video heads.
To set the decoder
TAPE STATUS
• NOT RECORDABLE:
Insert a tape with its protection tab in place
We have already described, how to connect a decoder
for pay-TV station as DECODER or PREMIERE on page
10. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
NO. OF TIMER PROGRAMME
• 2
Shows the number of timer recording.
1. Press i.
NEXT TIMER PROGRAMME
The main menu will appear on the TV screen.
Press 2 or 1 to select the DECODER.
Press ENTER/OK.
• PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3. Press i to remove the menus from the TV screen.
2. Press 3 or 4 to select.
ON: When the decoder is connected to the AV2
socket.
Wide Screen Compatibility 16:9
OFF: When another VCR is connected to the AV2
socket.
Your DVD+VCR can record and play back wide screen
aspect ratio programmes (16:9). To record a wide screen
format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
1. Switch on your DVD+VCR.
Press i.
Press 2 or 1 to select
Press ENTER/OK.
.
1
2
1
2
Pr-12
Pr-12
P
P
A
ACMS
SET
S
SET
SET SYS
AUTO
R
R
f
4:3
f
OSD
ON
OFF
OSD
ON
16:9
i
OFF
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation - VCR part
Recording from External Components
Copying from DVD to VCR
You can record from an external component, such as a
camcorder or VCR, connected to any of the DVD+VCR’s
external inputs.
You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD deck
and close the disc tray.
1. Make sure that the component you want to record
from is connected properly to the DVD+VCR.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want to
2. Press AUX repeatedly to select the external input to
record from.
start dubbing using the
functions.
1, 6, 5 and ;
AV 1 for recording from EURO AV1 SCART jacks on
the rear of your unit.
For best results, pause playback at the point from
which you want to record.
AV 2 for recording from EURO AV2 SCART jacks on
the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) jacks on the front of your unit.
4. Press ¥ on the Remote Control. The DVD goes into
PLAY mode and the VCR goes into RECORD mode.
If the DVD disc menu appears, you may need to
press
1
manually to begin copying.
3. Load a recordable tape.
5. When the DVD is finished playing, press ∫ to end
4. Set a recording mode (SP or LP) as necessary by
copying.
pressing
repeatedly.
Notes:
5. Play the tape or disc in the external component. If
you have a TV attached to your DVD+VCR, you can
see the video playing.
• If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs (or Discs). “LOCK” is displayed
in the display window.
• You must stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and over
again.
6. Press ¥ once to start recording.
The REC indicator lights in the display window.
7. Press ∫ to stop recording.
• When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
Notes:
• Before recording, confirm the recording start position.
• If your source is copy-protected using CopyGuard, you will
not be able to record it using this unit. See Copyright on page
2 for more details.
• To record for a fixed length of time, see One-touch Timer
Recording.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
Playback Setup
General Features
1. Turn on the TV and select the video input source
connected to the DVD+VCR.
Notes:
Unless stated otherwise, all operations described use
the remote control. Some features may also be available
on the Setup menu.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD+VCR.
3. Press OPEN/CLOSE (<) to open the disc tray and
load your chosen disc in the tray, with the playback
side down.
DVD
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY and select desired title by
using number (0-9) or 2 / 1 then press ENTER/OK to
move to another title.
4. Press OPEN/CLOSE (<) to close the tray.
Playback starts automatically. If playback does not
start, press
1.
Moving to another CHAPTER / TRACK
In some cases, the disc menu might appear instead.
DVD
VCD
5. To stop the playback, press ∫.
The unit records the stopped point, depending on
the disc. “;∫” appears on the screen briefly. Press
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
1
to resume playback (from the scene point). If
you press ∫ again or unload the disc (“∫” appears
on the screen.), the unit will clear the stopped point.
Press OPEN/CLOSE (<) to remove the disc.
Press OPEN/CLOSE (<) to close disc tray or press
Í/I, the disc tray closes automatically and unit turns
off.
• Press 9 or : briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
• Press : twice in quick successions to step back to
the previous chapter/track.
• To go directly to any chapter during DVD playback,
chapter/track icon. Input the chapter/track number (0-
9) or use 2 / 1.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
Note:
DVD
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 18).
Use the 2 1 3 4 buttons to select the title/chapter
you want to view, then press ENTER/OK to start.
Press TITLE or DISC MENU to return to the menu
screen.
DVD
VCD
Slow Motion
VCD
The DVD+VCR will now go into SLOW mode.
to view and press RETURN to return to the menu
screen. Menu settings and operating procedures
may differ. Follow the instructions on each menu
page 18).
2. Use 5 to select the required speed:
F 1/7, F 1/6, F 1/4, or F 1/2 (forward).
3. To exit Slow Motion mode, press
1.
Note:
Slow motion playback in reverse is not possible.
Notes:
• If parental control is set and the disc is not within the rating
settings you must input the password.
(See “LOCK” on page 19).
• DVDs may have a region code. Your player will not play discs
that have a region code different from your player. The region
code for this player is 2 (two).
• In some cases, playback of discs recorded in the NTSC
system may be jerky.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
DVD
VCD
Still Picture and Frame-by-Frame Playback
Repeat
DVD
VCD
You can repeat a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
1. Press ; during playback. Advance the picture
frame-by-frame by pressing ; repeatedly.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. To exit still motion mode, press
1.
DVD
VCD
Search
1. Press 6 or 5 during playback.
• Off: does not play repeatedly.
Video CDs - Repeat Track/All/Off
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off: does not play repeatedly.
2. Press 6 or 5 repeatedly to select the required
speed:
DVD disc; X2, X4, X16 or X100
Video CD; X2, X4, X8
Note:
3. To exit SEARCH mode, press
1.
• On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 18).
• If you press 9 once during Repeat Chapter (Track)
playback, the repeat playback cancels.
DVD
VCD
Time Search
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
DVD
VCD
Repeat A-B
To repeat a sequence.
2. Press 3/4 to select the time clock icon and
1. Press REPEAT A-B at your chosen starting point.
“A- ” appears briefly on the TV screen.
“ -:--:-- ” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
2. Press REPEAT A-B again at your chosen end point.
“A- B” appears briefly on the TV screen and the
repeat sequence begins.
numbers, press CLEAR (
) to remove the
numbers you entered. Then input the correct
numbers.
3. Press REPEAT A-B again to cancel.
4. Press ENTER/OK to confirm. Playback starts from
the selected time.
DVD
VCD
Zoom
Use zoom to enlarge the video image.
Note:
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
On a Video CD with PBC, you must set PBC to Off on the setup
menu to use this function (See “PBC” on page 18).
DVD
VCD
Marker Search
To enter a Marker
2. Each press of the ZOOM button changes the TV
screen in the sequence:
#5 1/9
You can start playback from up to nine memorized points.
To enter a marker, press MARKER at the desired point
on the disc. The Marker icon appears on the TV screen
briefly. Repeat to enter up to nine markers.
100% size → 150% size → 200% size → 300% size
→ 400% size → 100% size.
3. Use the 2 134 buttons to move through the
zoomed picture.
1
2
3
-
-
-
-
-
-
To Recall or Clear a Marked Scene
4. To resume normal playback, press ZOOM
repeatedly or CLEAR (
) button.
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
Note:
Zoom may not work on some DVDs.
2. Within 10 seconds, press 2/1 to select a marker
number that you want to recall or clear.
3. Press ENTER/OK and playback starts from the
marked scene. Or, Press CLEAR (
) and the
marker number is erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
VCD
Changing the Audio Channel
Special DVD Features
Press AUDIO repeatedly during playback to hear a
different audio channel (Stereo, Left, Right).
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press DISC MENU.
Input the corresponding number or use the 2 134
buttons to highlight your selection.
DVD
CD
VCD
Last Scene Memory
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if you
remove the disc from the player or switch off the player.
If you load a disc that has the scene memorized, the
scene is automatically recalled.
Then press ENTER/OK.
DVD
Title Menu
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
Note:
This player does not memorize the scene of a disc if you switch
off the player before commencing to play the disc.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and chapters
for the title.
DVD
Instant Replay
Press AUX during playback and the disc will reverse
picture search through 10 seconds of playback. And then
the playback will start from the point again.
3. Press TITLE to exit.
DVD
Disc Menu
Screen Saver
The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
Press DISC MENU and the disc menu is displayed.
Press DISC MENU again to exit.
DVD
Camera Angle
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback. Press ANGLE repeatedly during
playback to select a desired angle. Note that the number
of the current angle appears on the display.
Tip:
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
DVD
Changing the Audio Language
Press A.MONITOR repeatedly during playback to hear a
different audio language or audio track.
DVD
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note:
If there is no information,
is displayed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio CD and MP3 Disc
On-Screen Display - DVD
Maintenance and Service
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Refer to the information in this chapter before contacting
a service technician.
Handling the Unit
1. Press DISPLAY during playback.
2. Press 3 / 4 to select an item.
When shipping the unit
The selected item is highlighted.
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed at
the factory.
3. Press 2 / 1 to change the setting. You can also use
the number buttons if appropriate (e.g. inputting the
title number). For some functions, press ENTER/OK
to execute the setting.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray
near the unit.
• Do not leave rubber or plastic products in contact with
the unit for a long period of time. since they leave
marks on the surface.
Notes:
• Some discs may not provide all of the features shown below.
• If no button is pressed for 10 seconds, the on-screen display
disappears.
• If
is displayed, action prohibited or not available.
Example: On-Screen Display during playing
DVD Video
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened with
a mild detergent solution.
Items
Selection Method
2 / 1, Numbers
ENTER/OK
1 / 1
1 / 18
-:--:--
Title Number
Do not use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the unit.
2 / 1, Numbers
ENTER/OK
Chapter Number
Time search
Maintaining the Unit
Numbers
ENTER/OK
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished.
Example: On-Screen Display during playing
VCD
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
Items
Selection Method
For details, please contact your nearest authorized
service center.
Track Number
(or PBC mode)
2 / 1, Numbers
ENTER/OK
1 / 1
Numbers
ENTER/OK
Time search
-:--:--
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3 Disc
The DVD+VCR can play MP3 formatted recordings on
CD-ROM, CD-R, or CD-RW discs.
MP3 disc compatibility with this player is limited
as follows:
• Sampling frequency: within 8 - 48 kHz
• Bit rate: within 32 - 320kbps
• The player cannot read an MP3 file that has a file
extension other than “.mp3”.
• CD-R physical format should be ISO 9660
• If you record MP3 files using software that cannot
create a file system (eg. Direct-CD) it is impossible
to playback MP3 files. We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.
Audio CD
Once you insert an audio CD a menu appears on the TV
screen. Press 3 / 4 to select a track then press
ENTER/OK and playback starts.
1
or
AUDIO CD
0:52:07
1 / 12
List
Program
Track1
Track2
Track3
Track4
Track5
• File names should have a maximum of 8 letters
and must incorporate an .mp3 extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
Track6
Track7
Track8
Clear All
PROGRAM Edit
• The total number of contens on the disc should be
less than 1500 files and 300 folders.
MP3
1. Press 3 / 4 to select a folder, and press ENTER/
This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions (see above) to
ensure compatible playback.
OK to see the folder contents.
2. Press 3 / 4 to select a track then press
1
or
ENTER/OK. Playback starts.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission
should always be sought from the copyright
owner.
Clear All
DISPLAY Info
PROGRAM Edit
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
• If there is no information, “No ID3 TAG” appear on the
menu screen.
Tips:
• If you are in a file list on the “MUSIC” menu and want to
return to the Folder list, use the 3 / 4 to highlight
and
press ENTER/OK.
• To go directly to any track, input the track number (0-9).
• On a CD with MP3 and JPEG you can switch MP3 and
JPEG. Press TITLE and “MUSIC” or “PHOTO” word on top of
the menu is highlighted.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3 Disc
Audio CD and MP3 Disc Features
CD
MP3
Random
1. Press RANDOM during playback. Random Playback
begins immediately and “Random” appears on the
menu screen.
CD
MP3
Pause
1. Press ; during playback.
2. To return to normal playback, press RANDOM
repeatedly until “Random” disappears from the
menu screen.
2. To return to playback, press
1
or press ; again.
CD
MP3
Moving to another Track
1. Press 9 or : briefly during playback to go to
the next track or to return to the beginning of the
current track.
Tip:
By pressing 9 or : during random playback, the unit
selects another track and resumes random playback.
2. Press : twice in quick successions to go back to
CD
the previous track.
Repeat A-B
1. To repeat a sequence during disc playback press
REPEAT A-B at your chosen starting point. The
Repeat icon and “A -” appear on the menu screen.
3. You can play any track by inputting its number.
CD
MP3
Repeat Track / All / Off
You can play a track/all on a disc.
2. Press REPEAT A-B again at your chosen end point.
The Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play repeatedly.
1. Press REPEAT when playing a disc. The repeat icon
appears.
3. To exit the sequence and return to normal play,
press REPEAT A-B again. The Repeat icon
disappears from the menu screen.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track.
• All: repeats all the tracks on a disc.
• Off (No display): does not play repeatedly.
Note:
If you press 9 once during Repeat Track playback, the repeat
playback will be cancelled.
CD
MP3
Search
1. Press 6 or 5 during playback.
2. Press 6 or 5 repeatedly to select the required
speed:
X2, X4 and X8 backward or forward.
3. To exit SEARCH mode, press
1.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3 Disc
Programmed Playback
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat icon
appears.
The program function enables you to store your favourite
tracks from any disc in the player memory.
A program can contain 30 tracks.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
1. Insert a disc.
AUDIO CD or MUSIC menu appears.
2. Press MNL.PROG.
Note:
The E mark will appear to the right of the word
“Program” on the right side of the menu screen.
If you press 9 once during Repeat Track playback, the repeat
playback will be cancelled.
AUDIO CD
0:52:07
6 / 16
Erasing a Track from “Program” List
List
E
Program
01-TRACK01
02-TRACK02
1. During STOP mode, press MNL.PROG. and E mark
will appear.
01-TRACK01
02-TRACK02
03-TRACK03
04-TRACK04
05-TRACK05
06-TRACK06
07-TRACK07
08-TRACK08
03-TRACK04
04-TRACK06
2. Use 1 / 3 / 4 to select the track that you wish to
erase from the Program list.
Clear All
3. Press CLEAR (
).
PROGRAM Edit
Repeat to erase additional tracks on the list.
Audio CD Program Menu
Erasing the Complete Program List
1. During STOP mode, press MNL.PROG. and E mark
will appear.
MUSIC
0:00:00
4 / 4
List
Program
03 File 03
E
03 File 03
04 File 04
05 File 05
06 File 06
07 File 07
08 File 08
09 File 09
10 File 10
06 File 06
08 File 08
10 File 10
2. Use 1 / 3 / 4 to select “Clear All” in the “Program”
list, then press ENTER/OK.
Note:
Clear All
The programs are also cleared when the disc is removed.
MP3
PROGRAM Edit
DISPLAY Info
MP3 Program Menu
Note:
Press MNL.PROG. again, the E mark will disappear to exit
the Program Edit mode.
3. Select a track on the “List”, then press ENTER/OK to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press 1.
Select the track you want to start playing in the
“Program” list.
5. Press
1
or ENTER/OK to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC) list
and then press
1
or ENTER/OK.
Note:
When you play the programmed track, the E mark will disappear
then the program edit mode will disable.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a JPEG Disc
JPEG
Using this DVD+VCR you can view discs with JPEG files.
Slide Show
Use 342 1 to highlight the
press ENTER/OK.
(Slide Show) then
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
PHOTO
JPEG
Still Picture
List
Preview
1. Press ; during slide show.
Folder 00
Folder 01
Folder 02
Folder 03
Folder 04
The player will now go into PAUSE mode.
>>>
2. To return to the slide show, press
again.
1
or press ;
01 FILE 01
02 FILE 02
03 FILE 03
JPEG
Moving to another File
/FILE 01
Press 9 or : or cursor (2 or 1) once while
viewing a picture to advance to the next or previous file.
2. Press 3 / 4 to select a folder, and press ENTER/
OK. A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder list,
use the 3 / 4 buttons on the remote to highlight
and press ENTER/OK.
JPEG
Zoom
Use zoom to enlarge the photo image. (see page 29)
JPEG
3. If you want to view a particular file, press 3 / 4 to
To rotate picture
highlight a file and press ENTER/OK or
1.
Press 3 / 4 during showing a picture to rotate the
picture clockwise or counter clockwise.
The selected file will appear for viewing.
The on-screen messages displayed with the file can
be turned off by pressing the RETURN (Hide) button
on the remote control.
While viewing a file, you can press ∫ to move to the
previous menu (PHOTO menu).
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD+VCR to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 5760 (Horizontal) x
4608 (Vertical) pixels and burn another disc.
• The total number of contens on the disc should be
less than 1500 files and 300 folders.
• Some discs may be incompatible due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
Tips:
• Information and user guidance regarding the current image
is displayed in the lower part of the screen. You can toggle
this bar on and off using RETURN.
• There are three Slide Speed options
:
>>> (Fast), >> (Normal) and > (Slow)
Use 342 1 to highlight the Speed. Then, use 2 / 1 to
select the option you want to use then press ENTER/OK.
• On a disc with MP3 and JPEG you can switch MP3 and
JPEG. Press TITLE and MUSIC or PHOTO word on top of
the menu is highlighted.
• File names without “.jpg” extension will not be able
to be read by this DVD+VCR. Even though the files
are shown as JPEG image files in Windows
Explorer.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Language and Area Code List
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Serbo-Croatian
Shona
Sindhi
Latvian, Lettish
Area Code List
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
Monaco
BE
BT
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
PA
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
PY
PH
PL
PT
RO
RU
KE
KW
LY
Kuwait
Libya
Luxembourg
El Salvador
LU
Zimbabwe
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
Cause
Correction
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
The power is on, but the • DVD or VCR button is not switched
• Refer to page 5.
DVD+VCR does not
properly.
work.
• No disc is inserted.
• No tape is inserted.
• Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No picture.
• The TV is not set to receive DVD+VCR
signal output.
• Select the appropriate video input
mode on the TV so the picture from the
DVD+VCR player appears on the TV
screen.
• The video cable is not connected securely. • Connect the video cable into the jacks
securely.
• Mismatch setting between TV and this
• Select the correct Video Output in
unit.
SETUP menu.
• Wrong connection.
• Check the connection.
No sound.
• The equipment connected with the audio
cable is not set to receive DVD+VCR
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
• The audio cables are not connected
• Connect the audio cable into the jacks
securely.
securely.
• The power of the equipment connected
• Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
• The AUDIO options are set to the wrong
• Set the AUDIO options to the correct
position.
position.
The playback picture is
poor.
• The disc is dirty.
• Clean the disc.
• The TV channels are not tuned in
• Check tuning, carry out tuning again.
properly.
• Tape heads are dirty.
• Clean video heads.
• Tape is a rental or was recorded on
another VCR.
• Use PR/TRK (3/4) for manual
tracking adjustment while tape is
playing.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Symptom
Cause
Correction
The DVD+VCR does not • An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
start playback.
type and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
Video tape cannot be
inserted.
• Is the cassette compartment empty?
• Audio mode is not set properly.
• NICAM mode is not set properly.
• Eject the tape in.
No Hi-Fi sound
• Select STEREO by repeatedly pressing
AUDIO on the remote control.
No NICAM sound
recording
• Make sure NICAM in the menu is set to
AUTO for the station to be recorded.
The remote control does • There is an obstacle in the path of the
• Remove the obstacle.
not work properly.
remote control and this unit.
• The batteries in the remote control are
• Replace the batteries with new ones.
exhausted.
• The remote control is not pointed at the
• Point the remote control at the remote
remote sensor of the DVD+VCR.
sensor of the DVD+VCR.
• The remote control is too far from the
• Operate the remote control within 23ft
DVD+VCR.
(7 m).
• This remote control use the same buttons • When using a VCR, first press the VCR
for VCR and DVD functions (ex.PLAY).
button. When using a DVD, first press
the DVD button.
Timer recording is not
possible.
• Clock in DVD+VCR is not set to correct
time.
• Set clock to correct time.
• Reprogram Timer.
• Timer has been programmed incorrectly.
•
indicator light does not appear after
programming timer.
• Reprogram Timer and turn DVD+VCR
off to enable timer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 200-240 V, 50 Hz
17 W
430 X 78.5 X 265 mm (w/h/d)
4.2 kg
Operating temperature
Operating humidity
Timer
5°C to 35°C (41°F to 95°F)
5 % to 90 %
24 hours display type
UHF 22-68 (Adjustable)
RF Modulator
System
Laser
Semiconductor laser, wavelength 650 nm
Double azimuth 6 heads, helical scanning.
PAL
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Video Head system
Signal system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Inputs (VCR)
Audio
-6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
Video
1.0 V (p-p), 75 ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1 Vp-p 75 ohms, sync negative
Audio output (digital audio)
Audio output (analog audio)
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 kHz, 0 dB), 600 ohms, RCA jack (L, R) x 1/SCART (TO TV)
Outputs (VCR/DVD)
Audio
Video
-6.0 dBm, less than 1 kohms (SCART)
1.0 V (p-p), 75 ohms, unbalanced (SCART)
• Designs and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in Indonesia
0305MNH-AL-OT
EZ
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|