DVD PLAYER
Introduction
2
XV-S500BK/XV-S502SL
Getting started
6
Basic operations
Advanced operations
MP3 disc playback
JPEG disc playback
12
22
39
42
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
DVD/SUPER VCD/VCD/CD PLAYER
7
STOP
3
PLAY
8
PAUSE
4
SKIP ¢
0OPEN/CLOSE
REPEA
T
SUBTITLE AUDIO
VFP
STANDBY
PROGRESSSIVE
SCAN
ZOOM
STANDBY/ON
DIGEST ANGLE
3D
PHONIC
AMP VOL
PROGRESSIVE
RM-SXV008J
REMOTE CONTROL
Changing the initial settings 47
V I D E O
Additional information
56
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this information
for future reference.
Model No.
Serial No
LET0200-002B
[J/UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Table of Contents
To repeat the current selection or all tracks
[Repeat playback] ...............................................................27
To repeat a desired part [A-B repeat playback]...................28
Changing the language, sound and scene angle.......... 29
To select the subtitle language [SUBTITLE] ........................29
To change the audio language or sound [AUDIO]..............30
To select a scene angle of DVD VIDEO [ANGLE].................31
Special picture playback and picture/sound effect...... 32
To display continuous still pictures [STROBE]....................32
To zoom in/out pictures [ZOOM]..........................................32
To adjust the picture character [VFP]...................................33
To simulate surround sound [3D PHONIC]..........................34
Menu bar functions ......................................................... 35
To bring up the menu bar .....................................................35
Basic operation procedure....................................................35
Menu bar functions for DVD VIDEO .....................................36
Menu bar functions for Audio CD/Video CD/SVCD .............37
Introduction
Page 2
Supplied accessories..........................................................2
Notes on handling..............................................................3
Important cautions...................................................................3
Safety precautions ...................................................................3
About discs .........................................................................4
Playable disc types...................................................................4
Non-playable discs...................................................................4
Audio formats...........................................................................4
Disc structure............................................................................5
Video CDs and SVCDs with Playback Control function ........5
Care and handling of discs......................................................5
Getting started
Page 6
Connections........................................................................6
Before making any connections .............................................6
To connect to a TV ...................................................................6
To connect to a stereo audio amplifier/receiver....................8
To connect to digital audio device..........................................9
To connect the power cord .....................................................9
Using the remote control unit.........................................10
To install batteries in the remote control unit .....................10
Remote sensor .......................................................................10
To use the remote control unit for TV operation.................11
To control the volume of a JVC's amplifier or receiver......11
MP3 disc playback
Page 39
About MP3 disc................................................................ 39
Operations........................................................................ 39
Basic operations.....................................................................39
Selecting the desired Group and Track................................40
Direct selection.......................................................................41
Repeat playback.....................................................................41
JPEG disc playback
Page 42
Basic operations
Page 12
About JPEG disc.............................................................. 42
Basic operations .............................................................. 43
To see a desired picture ........................................................43
To zoom in/out the picture [ZOOM] .....................................44
To see pictures continuously [slide-show mode]......... 44
Playback pictures from the beginning of the disc...............44
Selecting the start point of the slide show ..........................45
Repeat function......................................................................46
Before operation...............................................................12
Turning on/off the unit...........................................................12
The initial setup before using the unit .................................13
Basic playback ..................................................................14
Inserting and removing discs................................................14
To start playback....................................................................15
To stop playback completely ................................................15
To stop playback temporarily ...............................................15
Resuming playback..........................................................16
To memorize the interrupted position .................................16
To resume playback...............................................................17
Variable speed playback..................................................18
To advance or reverse playback rapidly
Changing the initial settings
Page 47
Selecting preferences...................................................... 47
About the Preference display................................................47
How to set preferences..........................................................47
LANGUAGE page...................................................................48
PICTURE page ........................................................................49
AUDIO page............................................................................50
OTHERS page.........................................................................52
Limiting playback by children ........................................ 53
To set Parental Lock for the first time
while monitoring................................................................18
To advance a still picture frame-by-frame...........................18
To playback in slow-motion..................................................18
To locate the beginning of the scene or song ...............19
To locate a desired selection using 4or ¢...................19
To locate a desired selection using the numeric buttons.... 19
Other convenient functions.............................................20
To check the playback status ................................................20
To move back the playback position while DVD VIDEO
[PARENTAL LOCK]..............................................................53
To change the settings [PARENTAL LOCK] .........................54
To temporarily release the Parental Lock
[PARENTAL LOCK]..............................................................55
playback [One touch replay function] ...............................21
To change the brightness of the display window ...............21
Additional information
Page 56
Names of parts and controls.......................................... 56
Front panel .............................................................................56
Display window......................................................................56
Rear panel...............................................................................56
Remote control unit...............................................................57
AV COMPU LINK remote control system...................... 58
Connection and setup............................................................58
Operation................................................................................58
Troubleshooting .............................................................. 59
Frequently Asked Questions .......................................... 61
Specifications................................................................... 62
Appendix A: Country code list for Parental Lock.......... 63
Appendix B: Glossary...................................................... 64
Appendix C: Index............................................................ 66
Advanced operations
Page 22
Playing from a specific position on a disc......................22
To locate a desired scene from the DVD menu...................22
To locate a desired scene from the menu of the
Video CD/SVCD with PBC...................................................22
To specify a desired title........................................................23
To locate a desired position in the current title or track
[Time search].......................................................................23
To locate a desired scene from the display [DIGEST].........24
Changing the playback order ..........................................25
To playback in the desired order [Program playback]........25
To playback in random order [Random playback]..............26
Repeat playback ...............................................................27
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Supplied accessories
• Audio/video cable (Yellow/White/Red) (x 1)
• R6P(SUM-3)/AA(15F) battery (x 2)
• Instruction manual (x 1)
• Component video cable (Red/Green/Blue) (x 1)
• Remote Control Unit (x 1)
OPEM/
CLOSE
TV
1
TV
4 T
ST
TV ANDBY/ON
TV
TV2
DV
7
2
D
10TV-/-
T
D
V
D
5
-
ANGLE
TV
TV3
8
3
TV
SUBTITLE
T P
O
VO
0
M
E
N
U
6
T
L
CH
+
9
+1M0U
TIT
GR
OUP
C
H
TV
CANC
O
ENTER
I
PREVCIOUS
E
CH
M
E
CLE
N
U
V
OL+
SLO
SELECT
W
REPEA
O
N
NEXT S
C
R
E
E
N
T
DIGEST
SUBTIE
ST
• AC power cord (x 1)
OB
PHON3IDC
ANGLE
SLO
A
UDIO
W+
VFP
PR
ZOOM
OGREE
SCAN
AMP V
RM-SXV008J
REMO
TE CONTR
OL
• AC power plug adaptor (x 1)
(for PX model only)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
English
Notes on handling
Safety precautions
Important cautions
Avoid moisture, water and dust
Do not place the unit in moist or dusty places.
Installation of the unit
• Select a place which is level, dry and neither too hot
nor too cold (between 5oC and 35oC, 41oF and 95oF).
• Leave sufficient distance between the unit and the TV.
• Do not use the unit in a place subject to vibrations.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it near
a heating device.
Power cord
When you are away
• Do not handle the power cord with wet hands!
• A small amount of power (1.3 W, for PX model:2.5W) is
always consumed while the power cord is connected
to the wall outlet.
• When unplugging the unit from the wall outlet, always
pull the plug, not the power cord.
When away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet.
Do not insert foreign objects into the unit
Do not insert wires, hairpins, coins, etc. into the unit.
Do not block the vents
Blocking the vents may damage the unit.
To prevent malfunction of the unit
• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
• Do not insert any metallic object into the unit.
• Do not use any non-standard shape disc available on
the market, because it may damage the unit.
• Do not use a disc with tape, seals, or paste on it,
because damage to the unit may result.
Care of the cabinet
When cleaning the unit, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents and disinfectants. These may cause
deformation or discoloring.
If water gets inside the unit
Turn off the power switch and remove the plug from the
wall outlet, then call the store where you made your
purchase. Using the unit in this state may cause a fire or
electrical shock.
Note about copyright laws
• Please check the copyright laws in your country before
recording from DVD VIDEO, Audio CD, Video CD,
SVCD, MP3 and JPEG discs. Recording of copyrighted
material may infringe copyright laws.
Note about the copyguard system
• The DVD VIDEO disc is protected by the copyguard
system. When you connect the unit to your VCR (or
integrated TV/Video system), the copyguard system
activates and the picture may not be played back
correctly.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. "DTS", "DTS Digital Surround", are trademarks of Digital Theater Systems, Inc.
Copyright 1996 Digital Theater Systems, Inc. All Rights Reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About discs
Playable disc types
Audio formats
There are some audio formats recorded on discs as
shown below.
Playable and non-playable disc types are as follows:
DVD VIDEO
SVCD
Video CD
Audio CD
•
Linear PCM
V I D E O
Uncompressed digital audio, the same format used on
CDs and most studio masters.
The DVD Logo is a trademark.
DVD VIDEO supports 2 channels at sampling rates of
48/96 kHz and quantization of 16/20/24 bits.
Audio CD/Video CD is limited to 2 channels, 44.1 kHz
at 16 bits.
• CD-R and CD-RW discs recorded with the Audio CD,
Video CD, SVCD, MP3 or JPEG format can be played
back, though some may not be played back because of
the disc characteristics or recording condition.
Note that unfinalized discs cannot be played back.
• DVD-R discs recorded with the DVD VIDEO format can
be played back, though some may not be played back
because of the disc characteristics or recording
condition.
Note that unfinalized disc cannot be played back.
• DVD VIDEO players and DVD VIDEO discs have their
own Region Code numbers. This unit can play back
only DVD VIDEO discs whose Region Code numbers
include "1".
•
Dolby Digital
A surround audio format configured with six
channels. Because the "LFE (Low-Frequency Effect for
sub-woofer, etc.)" channel, one of the six channels, is
an auxiliary channel, this format is called "5.1-channel
system".
Not all Dolby Digital discs contain six (5.1) channel
information.
•
DTS (Digital Theater Systems)
Examples of playable DVD VIDEO discs:
A surround audio format configured with six (5.1)
channels which is same as Dolby Digital. Because the
compression ratio is lower than Dolby Digital, it
provides wider dynamic range and better separation.
Not all DTS discs contain six (5.1) channel
information.
1 2
3 4
1 2 3
4 5 6
ALL
1 5
1
This unit accommodates the NTSC system, also can play
back discs recorded with PAL system whose Region
Code numbers include "1".
The associated indicator lights up in the display window
when playing back a disc.
Note that the PAL video signal on disc is converted to an
NTSC signal and output.
Indicator
LPCM
Audio format
Non-playable discs
Linear PCM
DVD-ROM, DVD-RAM, DVD-RW, DVD+RW, DVD-AUDIO,
CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT, SACD,
MIX-MODE CD
DOLBY DIGITAL
DTS
Dolby Digital
DTS (Digital Theater Systems)
• Playing back discs listed as "Non-playable discs" above
may generate noise and damage speakers.
• This unit can play back audio signals recorded in CD-G,
CD-EXTRA, CD-TEXT and MIX-MODE CD discs.
Note that, with some formats and/or depending on the
unit's "DIGITAL AUDIO OUTPUT" setting, digital audio
signals are not always output from the unit's DIGITAL
OUT jacks as are recorded on the disc.
See "DIGITAL AUDIO OUTPUT" on page 50 for details.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
English
Disc structure
Care and handling of discs
(For DVD VIDEO)
How to handle discs
A DVD VIDEO disc is comprised of "titles" and each title
may be divided into some "chapters". For example, if a
DVD VIDEO disc contains some movies, each movie may
have its own title number, and each movie may be
divided into some chapters. In a DVD VIDEO KARAOKE
disc, each song usually has its own title number and
does not have chapters.
When handling a disc, do not touch the surface of the
disc. Since discs are made of plastic, they are easily
damaged. If a disc gets dirty, dusty, scratched or warped,
the images and sound will not be picked up correctly,
and such a disc may cause the player to malfunction.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
(For Audio CD/Video CD/SVCD)
An Audio CD, Video CD or SVCD is simply comprised of
"tracks."
Label side
Do not damage the label side, stick paper to or use any
adhesive on its surface.
Track 1
Track 2
Track 3
Track 4
Storage
Make sure that discs are kept in their cases. If discs are
piled on top of one another without their protective
cases, they can be damaged. Do not put discs in a
location where they may be exposed to direct sunlight,
or in a place where the humidity or temperature is high.
Avoid leaving discs in your car!
Video CDs and SVCDs with Playback
Control function
What is Playback Control function?
The Playback Control function, allows you to enjoy
menu-driven operation and high-resolution still images
which have a resolution four times greater than moving
pictures.
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc,
wipe with a soft dry cloth, moving from the center
outwards.
If a disc is difficult to clean, wipe with a cloth moistened
with water. Never use record cleaners, petrol, alcohol or
any anti-static agents.
•
High-resolution still image display
You can display high-quality images four times
clearer than moving pictures.
•
Menu-driven playback
A selection menu is displayed when you start
playing a Video CD and SVCD disc with the
Playback Control feature. The selection menu
shows a list of numbers for selection. Some discs
may show moving pictures or a divided screen.
You can interact with the screen using a menu
display to select and play an entry.
See example illustration below about basic feature
of menu-driven playback (for details about PBC, see
also page 22).
CAUTION
Sometimes during play images may be garbled or
noisy. This is sometimes due to the disc.
Press
RETURN.
Press
RETURN.
Press
RETURN.
Moving
picture
1
Moving
picture
Moving
picture
4
Menu
screen
4
2
1 2
Still
picture
1 2 3
Still
picture
4
4
Still
picture
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connections
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a
VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem
when connecting the unit to an integrated TV/Video system.
TV
VCR
The unit
Connect directly
NOTES
• In the following description, "TV" may be substituted with "monitor" or "projector."
• Terminal names used for other components may be different from those used in the following description.
To connect to a TV
Connection to a conventional TV
You can enjoy playback by simply connecting the unit to a TV.
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
The unit
In this connection, set the
scan mode selector to "480i".
AV COMPU LI
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
480i
Y
PB
PR
REMOTE
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
AUDIO OUT
VIDEO OUT
TV
Red
White
Yellow
Scan mode selector
IN
Yellow
VIDEO
Audio/Video cable (supplied)
LEFT
AUDIO
RIGHT
White
Red
Connection to a TV equipped with an S-video jack
If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.
The unit
In this connection, set the
scan mode selector to "480i".
AV COMPU LI
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
Y
P
B
PR
REMOTE
480i
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
AUDIO OUT
VIDEO OUT
Scan mode selector
TV
IN
S-VIDEO
Red White
VIDEO
LEFT
AUDIO
S-video cable (not supplied)
Audio cable (not supplied)
White
Red
RIGHT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connection to a TV equipped with component jacks
English
You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO
IN jacks of your TV with the video cables.
Blue
Component video cable (supplied)
Green
Red
The unit
AV COMPU LINK
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
Blue
Red
Y
P
B
PR
REMOTE
480i
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
Green
AUDIO OUT
VIDEO OUT
TV
IN
Red
White
Audio cable (not supplied)
Scan mode selector
Y
P
B
PR
S-VIDEO
VIDEO
COMPONENT IN
White
Red
LEFT
AUDIO
RIGHT
• Connect "Y" to "Y", "PB" to "PB"(CB), "PR" to "PR"(CR) correctly.
The unit supports the Progressive scan system(480p) as well as the conventional Interlace scan system(480i).
If your television or monitor equipped with component jacks supports the progressive video input, you can enjoy a high
quality picture by making the Progressive scan mode active.
•
•
•
If your television equipped with component jacks does not support the progressive scan mode
Set the Scan mode selector to "480i".
If your television equipped with component jacks supports the progressive scan mode
Set the Scan mode selector to "480p".
If you want to select the scan mode between the interlace and progressive modes
(depending on the source condition, or when connecting more than one television etc.)
You can select the mode from the remote control unit. To do this, set the scan mode selector to "REMOTE".
(See "To make the Progressive scan mode selection active from the remote control unit" on page 8 for details about
how to select the scan mode from the remote control unit when the scan mode selector is set to "REMOTE".)
NOTES
• When the scan mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit. The color of the
indicator differs depending on the "PROGRESSIVE MODE" setting on the "PICTURE" preference display and the status of the unit
(see pages 8 and 49.)
• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the front panel is not
lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, set the scan
mode selector on the rear panel to "480i". Or, while setting the scan mode selector to "REMOTE", make the Progressive scan
mode inactive by following the procedure described on page 8.
• When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack (optional).
• Make "ANALOG DOWN MIX" in the "AUDIO" preferences to "STEREO" (see page 51).
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio
output to monaural.
• To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment. (See the following pages.)
• If your TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK remote control
system" on page 58 for details.
About SCAN MODE
To display video on the television (monitor) screen, the conventional scanning method is called "Interlaced scan".
With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture
(frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing
all the even-numbered lines.
On the other hand, the Progressive scan system scans all horizontal lines at a time, so you can double the number of
pictures compared with the interlaced scan, resulting flicker-free, high-density picture.
Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video
source (note that some DVD VIDEO discs contain both film source and video source). Film sources are recorded as 24-
frame-per-second information, while (NTSC) video sources are recorded as 30-frame-per-second (60-field-per-second
interlaced) information.
When the unit plays back a film source material, uninterlaced progressive output signals are created using the original
information. When a video source material is played back, the unit interleaves lines between the interlaced lines on
each to create the interpolated picture and outputs as the progressive signal.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To make the Progressive scan mode selection active from the remote control unit
The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or monitor
supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode active.
If you want to select the scan mode between the interlace and progressive modes depending on the
source condition or when connecting more than one television, you can select the mode from the remote
control unit. To do this, set the scan mode selector on the rear panel to "REMOTE" (See page 7).
480p
REMOTE
480i
¶When the unit is turned on, and the scan mode selector on the rear panel is set to "REMOTE"
Press and hold down the VFP - PROGRESSIVE SCAN button for a few seconds.
The scan mode switches between the Progressive scan and Interlace scan modes.
• When the scan mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit.
Depending on the "PROGRESSIVE MODE" setting on the "PICTURE" preference display and whether the current
DVD VIDEO disc is film-source or video-source, the color of the indicator differs, as shown in the table below.
(See also pages 7 and 49.)
Source type of DVD VIDEO
Setting of
Note
PROGRESSIVE MODE
Film Source
Video Source
VIDEO
FILM
Red
Red
While stopped in the Progressive scan mode,
the PROGRESSIVE indicator is lit in red
regardless of the "PROGRESSIVE MODE"
selection.
Green
Green
Green
Red
AUTO
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
DVD/SUPER VCD/VCD/CD PLAYER
7
STOP
3
PLAY
8
PAUSE
4
SKIP
¢
0OPEN/CLOSE
STANDBY
SLOW-
STANDBY/ON
PROGRESSIVE
REPEAT SUBTITLE AUDIO
VFP
VFP -
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
PROGRESSIVE
SCAN
3D
PHONIC
AMP VOL
PROGRESSIVE indicator
RM-SXV008J
REMOTE CONTROL
NOTES
• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, use the interlace scan
mode. To check the compatibility of your TV set, contact your local JVC customer service center.
• All JVC progressive TV and High-Definition TV sets are fully compatible with the unit (Example : AV-61S902).
To connect to a stereo audio amplifier/receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
Connect the unit's AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
The unit
AV COMPU LINK
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
Y
PB
PR
REMOTE
480i
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
AUDIO OUT
VIDEO OUT
Amplifier or receiver
Red
White
IN
Audio cable (not supplied)
White
Red
LEFT
AUDIO
RIGHT
NOTES
• When using the unit with a stereo amplifier or receiver, set "ANALOG DOWN MIX" in the "AUDIO" preferences to "STEREO"
(see page 51).
• If your stereo amplifier or receiver has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV
COMPU LINK remote control system" on page 58 for details
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To connect to digital audio device
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using an optical or a coaxal digital cable (optional). The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
When you make digital connection, we recommend also to make the analog connection, because, depending on discs,
no signal may be output from the DIGITAL OUT.
When using the DIGITAL OUT (OPTICAL) jack, remove the protection
cap. Do not lose the removed cap.
When the DIGITAL OUT (OPTICAL) jack is not used, fix the protection
cap into the jack.
The unit
AV COMPU LINK
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
Y
PB
PR
REMOTE
480i
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
AUDIO OUT
VIDEO OUT
Red
White
Coaxial digital cable (not supplied)
Optical digital cable (not supplied)
Audio cable (not supplied)
Digital equipment
IN
IN
White
LEFT
AUDIO
RIGHT
OPTICAL
DIGITAL
COAXIAL
Red
• For digital connection, connect the unit's DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of digital audio
device using an optical or a coaxal digital cable.
NOTES
• When you connect the unit's DIGITAL OUT to a digital audio device, before using, set "DIGITAL AUDIO OUTPUT" in the
"AUDIO" preferences correctly according to the connected audio device. If "DIGITAL AUDIO OUTPUT" is not set correctly, loud
noise may be generated from speakers, causing damage to them. See "DIGITAL AUDIO OUTPUT" on page 50.
• When you connect the unit's DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy
surround sound, the unit's "D. RANGE COMPRESSION" setting in the "AUDIO" preferences is invalid. Make appropriate
surround audio settings on the decoder.
• If your digital audio device has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK
remote control system" on page 58 for details
To connect the power cord
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit's
AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY indicator lights in red.
NOTE (only for PX model)
• Use the supplied AC power plug adaptor when inserting the larger plug to the wall outlet.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other
accidents.
Caution
• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other
accidents.
• To prevent any accidents or damage caused by an unsuitable AC power cord, only use the supplied power cord. If the
cord is damaged, contact a dealer and get another power cord.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Using the remote control unit
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV and
amplifier/receiver.
Remote sensor
To install batteries in the remote
control unit
• Operate the remote control unit while pointing it
toward the remote sensor on the unit.
The battery compartment is located on the back of the
remote control unit.
• The remote control unit can be used within a range of
about 5 meters from the remote sensor. If you operate
the remote control unit from a diagonal position,
controllable distance may be shorter.
1 Press down on the point shown by
the arrow at the top of the
compartment cover, and pull up
the cover to open the
Remote sensor
compartment.
DVD/SUPER VCD/VCD/CD PLAYER
0OPEN/CLOSE
7
STOP
3
PLAY
8
PAUSE
4
SKIP
¢
STANDBY
STANDBY/ON
2 Place the two supplied R6P (SUM-
3)/AA(15F) batteries in the remote
control unit according to the
polarity markings ("+" and "–")
inside the compartment and on the
batteries.
PROGRESSIVE
3 Place the cover over the
compartment, and press down
lightly.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
The batteries will last about six months with normal use.
If the functions of the remote control become erratic,
replace the batteries. See below for more information.
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
Precautions for the safe use of batteries
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
Observe the following precautions for the safe use of
batteries. If they are used improperly their life will be
shortened, they may burst or their contents may leak.
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
Precaution
NOTE
• Remove the batteries from the remote control if it is
not going to be used for a long period of time.
• If the remote sensor on the unit is exposed to the
sunshine or strong light, you may not be able to control
the unit from the remote control unit.
• Remove dead batteries and dispose of them
properly.
• Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them
into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of
different types, when replacing them.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
5 Release TV/VIDEO - CANCEL.
English
To use the remote control unit for TV
operation
6 Try to operate the TV by pressing TV STANDBY/ON
.
If your TV turns on or off, you have successfully set
the control signal.
You can operate your TV from the remote control unit.
Setting the remote control signal for
operating your TV
The following buttons can be used for operating the
TV.
To use 5/∞(CH–, CH+), 2/3(VOL–, VOL+), TV/VIDEO -
CANCEL and numeric buttons for TV control, set the
TV - DVD switch to "TV".
TV
DVD
TV - DVD switch
Numeric buttons
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV STANDBY/ON
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV
DVD
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
TV/VIDEO -
CANCEL
CH
+
VOL-
VOL+
Turns the TV on or off.
ENTER
TV
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
Switches the TV input mode between TV
and VIDEO.
REPEAT SUBTITLE AUDIO
VFP
TV/VIDEO
CANCEL
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
1 Set the TV - DVD switch to "TV".
Selects the TV channels directly.
*For some TVs, pressing "+10" functions
as the "100+," while "10" functions as the
ENTER button if your TV requires
pressing the ENTER button after
selecting a channel number.
TV1
TV-/--
10
2 Hold down TV/VIDEO - CANCEL until step 4 is
1
~
finished.
TV0
0
3 Enter the manufacturer code of your TV listed below
by using the numeric buttons (0 through 9).
MUTING
+10
Mutes the TV sound.
Example:
To enter the manufacturer code "01": Press "0" then
"1".
Changes the TV channels.
CH
+
CH
-
• When the unit is shipped, the manufacturer code is set to
"JVC" (01).
VOL-
VOL+
Adjusts the TV volume.
4 Press ENTER.
Manufacturer code list
NOTE
Manufacturer No.
Manufacturer No.
• If there is more than one code listed for the
manufacturer of your TV, try them one by one until you
succeed.
AIWA
36
MIVAR
29
BEIJING
CCE
22
NEC
20
02
NOBLEX
NOKIA
22
CHANGHONG
DAEWOO
FERGUSON
FINLUX
FUNAI
34
31
17, 37
27
PANASONIC
PEONY
PHILCO
PHILIPS
RCA
04, 11
34, 38, 39
10, 17, 21
02
To control the volume of a JVC's
amplifier or receiver
You can control the volume of a JVC's amplifier or
receiver by using the AMP VOL +/– buttons on the
remote control unit.
30
32
GRADIENTE
GRUNDIG
HITACHI
ITT
15, 20
19
05
SAMSUNG
12, 33, 34,
35
10
AMP VOL
28
SANYO
SEARS
SHARP
SONY
13, 16
13
JINXING
JVC
38
Pressing the + button raises the audio volume of the
amplifier or receiver, while pressing the – button lowers
the volume.
01, 23,
24, 25
06
07
KONKA
40
TCL
41
LG (GOLDSTAR) 18
THOMSON
TOSHIBA
ZENITH
26
MAGNAVOX
MITSUBISHI
02
03
08,14
09
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may
use the corresponding buttons on the front panel if available.
NOTE
Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the 5/∞/2/3and
numeric buttons for controlling the unit.
TV
DVD
Before operation
Turning on/off the unit
Press DVD STANDBY/ON
on the remote control unit or press STANDBY/ON
on the front panel.
The STANDBY indicator on the front panel, which illuminates in red during standby, goes off.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
DVD
STANDBY/ON
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
DVD/SUPER VCD/VCD/CD PLAYER
0OPEN
STANDBY/ON
CH
+
STANDBY
STANDBY/ON
VOL-
VOL+
PROGR
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
STANDBY indicator
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
• You can turn on the unit by pressing the 3button. In this case, the unit starts playback if the disc is set in the disc tray.
If no disc is set, "NO DISC" appears on the display window.
• You can turn on the unit by pressing the 0OPEN/CLOSE button on the front panel. In this case, the disc tray opens.
The opening display shown right appears on the TV screen.
The following message may appear at the bottom of the opening display
depending on the condition.
• NOW READING:The unit is reading the disc information.
• REGION CODE ERROR!:
The region code of the DVD VIDEO disc does not
match the unit. The disc cannot be played back.
The disc tray is opening.
NOW READING
• OPEN:
• CLOSE:
• NO DISC:
The disc tray is closing.
No disc is loaded.
Message area
NOTE
• Even if you press the DVD STANDBY/ON
on the remote control unit or STANDBY/ON
on the front panel to turn off the
unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the
standby mode. In this state, the unit consumes a very small amount of power.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
The initial setup before using the unit
We recommend you to set the display language, TV monitor type and digital output before using the unit, depending on
circumstances, by following the procedure below.
See "Changing the initial settings" on and after page 47 for details about each setting item.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
ENTER
CH
+
VOL-
VOL+
ENTER
5/∞
CH
CHOICE
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
1 Press CHOICE for a few seconds to bring up
the first page of the DVD PLAYER SET UP
display.
5 Press ENTER.
The third (final) page is shown, in which the pull-
down menu of the "DIGITAL AUDIO OUTPUT" is
already open.
The pull-down menu of the "ON SCREEN
LANGUAGE" is already open.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY DIGITAL/PCM
DVD PLAYER SET UP
D RANGE COMPRESSION
STREAM/PCM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
DIGITAL AUDIO OUTPUT selection
ON SCREEN LANGUAGE selection
6 Use 5/∞to select a desired digital output
signal type.
2 Use 5/∞to select a desired language.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device, you
do not have to set this item.)
You can select the on-screen language for the
preference displays, etc. from among English,
Spanish and French.
3 Press ENTER.
The second page is shown, in which the pull-down
menu of the "MONITOR TYPE" is already open.
• When connecting with a Dolby Digital decoder,
select "DOLBY DIGITAL/PCM".
• When connecting with a DTS or MPEG
Multichannel decoder, select "STREAM/PCM".
• When connecting with other digital device, select
"PCM ONLY".
DVD PLAYER SET UP
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
4:3 L.B.
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
See page 50 for details.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
7 Press ENTER.
The TV screen returns to show the opening display.
MONITOR TYPE selection
NOTES
4 Use 5/∞to select a desired monitor type.
• This setting may not be necessary except when turning
on the power after purchasing the unit.
You can select the monitor type according to your TV.
• For the normal (conventional) TV, select "4:3 LB"
or "4:3 PS".
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See "Changing the initial settings"
on and after page 47 for details.
• For the wide-screen TV, select "16:9 AUTO" or
"16:9 NORMAL".
See page 49 for details about each mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Basic playback
This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and
JPEG disc playback, see the separate chapter on and after pages 39 and 42.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
OPEN/CLOSE
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
7 3 8
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
DVD/SUPER VCD/VCD/CD PLAYER
7
STOP
3
PLAY
8
PAUSE
4
SKIP ¢
0OPEN/CLOSE
VOL-
VOL+
STANDBY
ENTER
STANDBY/ON
PROGRESSIVE
CH
-
PREVIOUS
CLEAR
NEXT
3
8
SELECT
STROBE
7
SLOW-
SLOW+
DIsc tray
0OPEN/CLOSE
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
Inserting and removing discs
1 Press 0OPEN/CLOSE to open the disc tray.
2 Place a disc in the tray.
With the label side up
3 Press 0OPEN/CLOSE to close the disc tray.
¢
SKIP
4
E
The unit reads the disc information and the
opening display appears on the TV screen.
L
OPE/
0
DVD/SUPER V
STANDBY
STANDBY/ON
If a menu is shown on the TV screen
• To insert an 8-cm disc,
place it in the inner
recess.
When inserting a DVD VIDEO, Video CD or SVCD disc,
a menu display may be automatically shown on the
TV screen. From a menu, you can select a desired item
to be played back by following the procedure below.
(for DVD VIDEO)
1 Use 5/∞/2/3to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
(for Video CD/SVCD)
1 Use the numeric buttons to select a desired item.
The unit starts playback of the selected item.
NOTES
• Do not load a non-playable disc. For details about playable and non-playable disc types, see page 4.
• When loading a disc on the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.
• Do not use any stabilizer when playing back a disc.
• With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.
• If you insert a DVD VIDEO disc whose region code does not match the unit, "REGION CODE ERROR!" is shown in the opening
display. For detail about the region code, see page 4.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To start playback
Available :
Press 3.
The unit starts playback from the beginning.
About screen saver function
• A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed
for over 5 minutes.
While the screen saver
function is not activated
While the screen saver
function is activated
• Pressing any buttons on the unit or the remote control unit
will release the screen saver function and return to the
previous display.
• You can also turn off the screen saver function (see page 50).
About On-screen guide icons
• When you make an operation, you may see the following icons displayed over the picture for about 3 seconds. These have the
following meanings.
You can set the unit not to display these icons above via the preference settings described on page 52.
Icon
Status
Appears at the beginning of playback mode.
Appears at the beginning of stop mode.
Appears at the beginning of pause mode.
Appears at the beginning of fast forward/backward playback with the current speed. (See page 18.)
Appears at the beginning of slow-motion playback with the current speed. (See page 18.)
Appears at the beginning of Repeat playback mode. (See page 27.)
Appears at the beginning of a scene recorded from multiple angles. (See page 31.)
Appears at the beginning of a scene recorded with multiple audio languages. (See page 30.)
Appears at the beginning of a scene recorded with multiple subtitle languages. (See page 29.)
Appears when the unit does not accept your operation because of disc contents, structure, playback status etc.
Note that some operation are occasionally unacceptable even if
is not displayed.
NOTES
• When the RESUME function is "ON" or "DISC RESUME" and the resume point is memorized, pressing 3starts playback from
that point instead of the beginning. See page 17.
• During playback, the display window shows the title/chapter or track number being played.
• During DVD VIDEO playback, pressing 3moves back the playback position 10 seconds before the current position. See page 21
for details.
To stop playback completely
Available :
Press
7
.
The unit stops playback.
• If you press 0OPEN/CLOSE during playback, the unit stops playback and opens the disc tray.
To stop playback temporarily
Available :
Press 8.
The unit pauses playback. To resume playback, press 3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Resuming playback
The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.
There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 52 for details
about how to set the resume mode.
• When purchasing the unit, the resume mode is initially set to "ON".
• You can deactivate the resume mode by setting "RESUME" on the "OTHERS" preference display to "OFF".
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
OPEN/CLOSE
7 3
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
DVD/SUPER VCD/VCD/CD PLAYER
7
STOP
3
PLAY
8
PAUSE
4
SKIP ¢
0OPEN/CLOSE
TV-/--
TV0
MUTING
STANDBY
STANDBY/ON
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
PROGRESSIVE
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
Disc tray
0OPEN/CLOSE
3
SELECT
STROBE
7
SLOW-
SLOW+
.
To memorize the interrupted position
Available :
¶During playback
When the resume mode is set to "DISC RESUME"
Press 7.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows "----RESUME."
In this condition, a memory of the interrupted position is not cleared if you press 0OPEN/CLOSE to open the disc
tray, or press STANDBY/ON
the unit,
(on the front panel) or DVD STANDBY/ON
(on the remote control unit) to turn off
• The position interrupted is also memorized by pressing 0OPEN/CLOSE, STANDBY/ON
ON
(on the front panel) or DVD STANDBY/
(on the remote control unit). In this case, "----RESUME" is not shown on the display window.
• If you do not want the disc played to resume playback, press 7while stopped.
• It memorizes positions for the last 30 discs.
• If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position.
• When the unit has already memorized positions for 30 discs, memorizing one more position for a disc automatically erases the
oldest memory. On the other hand, if you interrupt playback of a disc which an interrupted position is already memorized, the order
of memorized discs may change. In result, when memorizing a new data, the order of memorized discs to be erased also may
change.
When the resume mode is set to "ON"
Press 7.
The unit stops playback and memorizes the interrupted position.
In this condition, a memory of the interrupted position is not cleared if you press STANBY/ON
panel) or DVD STANDBY/ON (on the remote control unit) to turn off the unit,
Note that, if you press 0OPEN/CLOSE to open the disc tray, the memory of the interrupted position is cleared,
(on the front
• The position interrupted is also memorized by pressing STANBY/ON
remote control unit).
(on the front panel) or DVD STANDBY/ON
(on the
• If you do not want the disc played to resume playback, press 7while stopped.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To resume playback
Available :
When the resume mode is set to "DISC RESUME"
¶While stopped, or no disc is inserted
1 Press 0OPEN/CLOSE to insert a disc whose interrupted position is memorized.
After loading the disc, the display window on the front panel shows "----RESUME."
If a disc for which you want to resume playback is already set in the disc tray, you need not to follow the step 1.
2 Press 3.
The display window shows "RESUME PLAY" and the unit resumes playback from the position you interrupted
playback.
The unit keeps the memory for the position on a disc where you interrupted playback, even though you remove the
disc from the disc tray and set it back again.
Of course, the unit keeps the memory when the disc remains in the disc tray since the last playback.
•
To play back a disc from the beginning (instead of the interrupted position)
After loading the disc, press 7before pressing 3to start playback.
Pressing 7while the disc is stopped clears the memory for the interrupted position.
Every time you interrupt playback, the position is memorized as the "resuming" point.
When the resume mode is set to "ON"
¶While the disc you interrupted playback last time* is still on the disc tray (*By pressing 7or by turning off the power.)
Press 3.
The unit resumes playback from the position you interrupted playback.
If you press 3then 7, the unit starts playback after the display window shows "RESUME PLAY".
Note that you cannot resume playback if you interrupted playback last time by opening the tray.
•
To play back a disc from the beginning (instead of the interrupted position)
Carry out any of the followings:
* Press 7while stopped, then press 3.
* Turn on the unit by pressing DVD STANDBY/ON
on the remote control unit or STANDBY/ON
on the front
panel then press 3.
NOTES
• If you change the "RESUME" setting on the "OTHERS" preference display to "OFF" or "ON" from "DISC RESUME", you cannot
resume playback of a disc whose "resuming" position is memorized. However, if you again set "RESUME" to "DISC RESUME",
you can resume playback of the disc.
• If you open the tray during RESUME mode is set to ON, the "resuming" point clears.
• The resume function cannot be performed with Audio CD, MP3 and JPEG discs.
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier or later than
the point you interrupt playback last time.
• The unit may not resume playback exactly from the interrupted point, depending on the point.
• For a double-sided DVD VIDEO disc, the unit regards each side as a different disc. Therefore, when resuming playback of such a
disc, make sure to set the disc with the resumed side down.
• When the unit memorizes the interrupted point of a disc, it also memorizes Audio, Subtitle and Angle settings (regardless of
whether "RESUME" is set to "DISC RESUME" or "ON").
• If you interrupt playback while the menu for a DVD VIDEO, SVCD or Video CD is shown on the TV screen, the unit may not
memorize the interrupted position correctly, regardless of whether the "RESUME" mode is set to "ON" or "DISC RESUME".
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Variable speed playback
You can play back slowly or fast, or advance a picture frame by frame.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
8
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
DVD/SUPER VCD/VCD/CD PLAYER
7
STOP
3
PLAY
8
PAUSE
4
SKIP ¢
0OPEN/CLOSE
VOL-
VOL+
STANDBY
ENTER
STANDBY/ON
PROGRESSIVE
CH
-
4/¢
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
8
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
4/¢
1/¡
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
To advance or reverse playback rapidly while monitoring
Available :
¶During playback
Method 1 (from the remote control unit only)
Press 1or ¡.
Each press of 1or ¡increases the playback speed. You can select the speed among 2 x, 5 x, 10 x, 20 x and 60 x
the normal speed.
Pressing 3returns the unit to normal playback.
Method 2
Hold down 4or ¢.
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly at 5 times the
normal speed. Releasing the button returns the unit to normal playback.
To advance a still picture frame-by-frame
Available :
¶ While paused (still)
Press 8.
Each time you press 8, the still picture advances to the next frame.
Pressing 3returns to normal playback.
To playback in slow-motion
Available :
You can playback the picture in slow-motion. The speed can be selected among 1/32 x, 1/16 x, 1/8 x, 1/4 x and 1/2 x the
normal speed.
¶During playback
Press 8, then use 1/¡.
To play forward slow-motion, press ¡, and to play reverse slow-motion (for DVD VIDEO discs only), press 1.
First, the unit plays the slowest speed, and each time you press the button, the playback speed increases.
Pressing 3returns to normal playback. Pressing 8pauses slow-motion playback.
NOTES
• The sound is muted during slow-motion playback.
• Reverse slow-motion playback is not possible for a Video CD and SVCD.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To locate the beginning of the scene or song
You can locate the desired title or chapter (for DVD VIDEO), or track (for Audio CD/Video CD/SVCD) from which the unit
starts playback.
TV
DVD
CLOSE
TV1
TV2
TV3
1
2
3
TV4
4
TV5
5
TV6
6
Numeric
buttons
TV7
TV8
TV9
4/¢
7
TV-/--
10
8
TV0
0
9
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
DVD/SUPER VCD/VCD/CD PLAYER
CH
+
7
STOP
3
PLAY
8
PAUSE
4
SKIP ¢
0OPEN/CLOSE
STANDBY
VOL-
VOL+
STANDBY/ON
ENTER
PROGRESSIVE
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
4/¢
SLOW-
SLOW+
To locate a desired selection using 4or ¢
Available :
¶For DVD VIDEO:
For Audio CD:
For Video CD/SVCD:
During playback
During playback or while stopped
During playback without PBC function
Press 4or ¢.
With an Audio CD, Video CD or SVCD, pressing the button skips a track. With a DVD VIDEO disc, pressing the button
skips a chapter or title depending on the disc configuration.
The selection number appears in the display window on the front panel.
• To skip forward titles/chapters/tracks, press ¢as many times as required.
• To skip to the beginning of the current track/title/chapter, press 4once.
• To skip back titles/chapters/tracks, press 4as many times as required.
NOTES
• This function may not work with some DVD VIDEO discs.
• This function does not work during Video CD/SVCD playback with PBC function (See pages 5 and 22.)
To locate a desired selection using the numeric buttons
Available :
.
¶For DVD VIDEO/Audio CD: During playback or while stopped
For Video CD/SVCD:
During playback without PBC function or while stopped
Use the numeric buttons to specify the number.
Depending on the disc type and the unit status, what is specified differs.
Unit status
Disc type
What is specified
DVD VIDEO
title or chapter*
track
While stopped
Audio CD/ Video CD/SVCD
DVD VIDEO
chapter
track
During playback
Audio CD/ Video CD/SVCD
* If a disc contains more than one title, a title is specified. If a disc contains only one title, a chapter is specified.
• To select a number between 1 and 10: Press the corresponding button for the number.
• To select a number higher than 10:
Examples:
Use the +10 button.
To select 13:
To select 34:
To select 40:
+10 → 3
+10 → +10 → +10 → 4
+10 → +10 → +10 → 10
The unit starts playback from the beginning of the selection. The selected title, chapter or track number appears in
the display window on the front panel.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
NOTES
• You can also specify the desired title during DVD VIDEO playback. See page 23 for details.
• During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the
menu.
• When
appears on the TV screen:
The title, chapter or track you have selected is not contained in the disc.
• This function does not work during Video CD/SVCD playback with PBC function (See pages 5 and 22.)
Other convenient functions
You can check the playback status, as well as change the brightness of the display window.
Also, you can move back the playback position 10 seconds from the current position.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
5/∞
VOL-
VOL+
ENTER
CH
ON SCREEN
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
3
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
ANGLE
AMP VOL
RM-SXV008J
REMOTE CONTROL
To check the playback status
Available :
You can see the current selection number (the title/chapter number for DVD VIDEO or track number for Audio CD/Video
CD/SVCD), time information (the track or chapter time while stopped, or the elapsed track or chapter time during
playback) and the transport status (stop, playback, pause etc.) on the TV screen.
¶During playback or while stopped
Press ON SCREEN.
The playback status bar appears on the TV screen.
(for DVD VIDEO)
(for Video CD)
Current transport
status
Current chapter Current transport
Transfer rate
number
status
TRACK 33 TIME
25:58
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
Current title number Currentchapter
time
Current track number Disc elapsed
time
(for Audio CD)
(for SVCD)
Current transport
status
Current transport status
TRACK 33 TIME 25:58
TRACK 33 TIME
25:58
Current track number Disc elapsed
time
Current track number Disc elapsed
time
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The indication on the rightmost of the status bar shows the unit's transport status as follows:
English
Icon
Status
Appears in the playback mode.
Appears in the stop mode.
Appears in the pause mode.
Appears in the fast forward/backward playback mode.
Appears in the slow-motion playback mode.
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access
various functions.
(Example of the menu bar for DVD VIDEO)
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
OFF
CHAP.
See page 35 for details about the menu bar.
NOTE
• To dismiss the status bar:
Press ON SCREEN until the status bar is dismissed.
To move back the playback position while DVD VIDEO playback
[One touch replay function]
Available :
During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position.
¶During DVD VIDEO playback
Press 3.
The playback position moves back 10 seconds before the current position.
Note that this function works only in the same title, though it works between chapters.
If you press 3within 10 seconds from the beginning of a title, playback starts from the beginning of the title.
NOTES
• This function works only with DVD VIDEO discs.
• When appears on the TV screen:
Some DVD VIDEO disc may not accept this function because of disc contents.
To change the brightness of the display window
You can dim the brightness of the display window.
¶When no disc is inserted or while stopped
Press 5or ∞while holding down ANGLE.
You can select the brightness of the display window from among three levels.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
This chapter describes operations for various advanced
functions of DVD VIDEO, Audio CD, Video CD and SVCD
discs. For MP3 and JPEG disc playback, see the separate
chapter on and after pages 39 and 42.
2 Use 5/∞/2/3to select a desired item, then
press ENTER.
The unit starts playback of the selected item.
NOTE
Make sure that the TV - DVD switch on
• With some discs, you can also select items by entering the
corresponding number using the numeric buttons, which
may cause the unit to automatically start playback.
the remote control unit is set to "DVD"
when using the 5/∞/2/3, numeric and
TV/VIDEO - CANCEL buttons for
controlling the unit.
TV
DVD
NOTES
• When
appears on the TV screen by pressing TOP
MENU or MENU in step 1:
The disc does not have an appropriate menu. listing the
titles.
Playing from a specific
position on a disc
• The MENU button does not work while stopped.
You can play a disc from the selected track, title or
chapter, or from the specified time.
To locate a desired scene from the menu
of the Video CD/SVCD with PBC
To locate a desired scene from the DVD
menu
Available :
Some Video CD/SVCD discs support the PBC function.
PBC is an abbreviation of "PlayBack Control". A Video
CD/SVCD disc recorded with PBC has its own menus,
such as a list of the songs of the disc. You can locate a
specific scene by using the PBC menu.
Available :
DVD VIDEO discs generally have their own menus which
show the disc contents. These menus contain various
items such as titles of movies, names of songs, or artist
information, and display them on the TV screen. You can
locate a desired scene by using the DVD menu.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
TV
DVD
Numeric
buttons
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
STANDBY/ON
OPEN/
CLOSE
TV
DVD
MUTING
TV1
1
TV2
2
TV3
3
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
TV4
TV5
TV6
TOP
MENU
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
CH
+
VOL-
VOL+
MUTING
ENTER
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
TOP
MENU
-
CH
+
PREVIOUS
CLEAR
NEXT
MENU
VOL-
VOL+
SELECT
STROBE
ENTER
3
5/∞/2/3
SLOW
-
SLOW+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
REPEAT SUBTITLE AUDIO
VFP
SELECT
STROBE
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
SLOW-
SLOW+
3D
PHONIC
AMP VOL
¶Whenever a DVD VIDEO disc is loaded
RM-SXV008J
REMOTE CONTROL
1 Press TOP MENU or MENU.
The menu appears on the TV screen.
¶When a Video CD/SVCD disc with PBC is stopped
1 Press 3or TOP MENU.
Example:
A disc menu appears on the TV screen (The PBC
function is activated).
Example:
About DVD menu
Normally, a DVD VIDEO disc which contains more than one title
may have a "title" menu which lists the titles. In such a case, the
menu appears on the TV screen by pressing the TOP MENU
button. Some DVD VIDEO discs may also have a different menu
which appears by pressing the MENU button.
"PBC" is indicated in the display window on the
front panel.
See the instructions of each DVD VIDEO disc for its particular
menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use the numeric buttons to select the desired
2 Use the numeric buttons to specify a title to be
English
item.
played.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
Examples:
To select 13: +10 → 3
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
The unit starts playback from the specified title.
The unit starts playback of the selected item.
You can return to the menu by pressing the
RETURN button.
When something like "NEXT" or "PREVIOUS"
appears on the TV screen, the unit generally works
as follows:
• Pressing ¢advances to the next page.
• Pressing 4returns to the previous page.
* The method of the operation is different
depending on the disc.
NOTE
• Some DVD VIDEO discs may not accept this function
because of disc contents.
To locate a desired position in the
current title or track [Time search]
Available :
You can play a disc from the desired position by
specifying the elapsed time from the beginning of the
current title (for DVD VIDEO), or the disc (for Audio CD/
Video CD/SVCD) using the time search function.
• If you want to playback a PBC-compatible Video CD/SVCD
disc without activating the PBC function, start playback by
using the numeric buttons instead of 3. (See page 19.)
• To activate the PBC function when a PBC-compatible Video
CD/SVCD disc is being played back without the PBC
function, carry out any of the followings:
* Press TOP MENU or MENU.
* Press 7to stop playback, then Press 3.
Note that some DVD VIDEO discs do not contain time
information, and the time search function cannot be
used.
TV1
TV2
TV3
1
2
3
TV4
4
TV5
5
TV6
6
Numeric
buttons
TV7
TV8
TV9
7
TV-/--
10
8
TV0
0
9
MUTING
+10
To specify a desired title
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
2/3
CH
+
VOL-
VOL+
ENTER
Available :
CH
ON SCREEN
-
PREVIOUS
NEXT
ENTER
While playing back a DVD VIDEO disc with more than
one title, you can specify a desired title to be played
using the numeric buttons.
¶For DVD VIDEO/AUDIO CD:
During playback or while stopped
¶For Video CD/SVCD:
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
In any condition except Video CD/SVCD
playback with PBC
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
Numeric
buttons
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
1 Press ON SCREEN twice.
RETURN SUBTITLE
GROUP
TITLE/
GROUP
CH
+
The menu bar appears on the TV screen.
(See page 35 for details about menu bar.)
VOL
-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
2 Use 2/3to move
to
, then press
SLOW-
SLOW+
ENTER.
¶During playback
The pull-down menu for entering time appears
under the
.
1 Press TITLE/GROUP.
"--" is shown in the title display area of the display
window.
(Screen example for DVD VIDEO)
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
(Example for the indication of display window)
OFF
CHAP.
TIME _:__:__
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
(Screen example for Audio CD)
Title display area Current chapter number
TRACK 33 TIME 25:58
OFF
PROG. RND.
TIME __:__
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
When you correct a mistake
3 Use the numeric buttons (0 to 10) to enter the
Use 2repeatedly to move back to the digit where you
entered a undesired numeral (the leftmost "-" digit),
and reenter the correct time.
desired time.
The specified time is displayed in the pull-down
menu.
(Example for changing "2:35:__" to "2:34:__".)
• "10" button works as "0" and "+10" button is not used with
this function.
TIME 2 : 3 5 : _ _
Press 2.
• You can specify the time in hour/minute/second format for
DVD VIDEO discs, and in minute/second format for Audio
and Video CD/SVCD discs.
TIME 2 : 3 _ : _ _
Press "4".
4 Press ENTER.
TIME 2 : 3 4 : _ _
The unit starts playback from the specified time.
NOTES
•
Example (for DVD VIDEO)
• When
appears on the TV screen:
To playback from 2(H):34(M):00(S)
The time you have selected is not contained on the disc,
or the time search function does not work on the disc.
TIME _ : _ _ : _ _
Also note that the time search function does not work
during Video CD/SVCD playback with the PBC function.
Press "2".
TIME 2 : _ _ : _ _
• To dismiss off the menu bar:
Press ON SCREEN.
Press "3".
• The time search function cannot be used during
program playback.
TIME 2 : 3 _ : _ _
Press "4".
TIME 2 : 3 4 : _ _
To locate a desired scene from the
display [DIGEST]
Press ENTER.
Available :
•
Example (for Audio CD/Video CD/SVCD)
To playback from 23(M):40(S)
The unit can display the opening scene of each title or
chapter on a DVD VIDEO or each track of a Video CD/
SVCD. You can select a desired scene from those
displayed on the TV screen.
TIME
TIME
TIME
_ _ : _ _
Press "2".
TITLE/
TV/VIDEO
RETURN SUBTITLE
GROUP
CANCEL
2 _ : _ _
CH
+
VOL-
VOL+
ENTER
5/∞/2/3
ENTER
Press "3".
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
2 3 : _ _
SLOW-
Press "4".
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
DIGEST
TIME 2 3 : 4 _
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
Press ENTER.
You do not have to press "0" to enter the trailing zeros
(for the last two digits in the example above).
¶For DVD VIDEO:
During playback or while stopped
For Video CD/SVCD: In any condition except
Video CD/SVCD playback
with PBC
1 Press DIGEST.
Up to nine opening scenes are displayed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Depending on the disc type and whether the disc is
being played back or not, the contents shown on
the TV screen differ.
English
Changing the playback
order
Disc type Unit status
While stopped
DVD
What is displayed
You can play tracks on an Audio CD, Video CD or SVCD in
the desired order or in random order.
The opening scene of
each title
During playback The opening scene of
each chapter in the
VIDEO
To playback in the desired order
[Program playback]
current title
Video CD/ While stopped or The opening scene of
SVCD during playback each track
Available :
By programming tracks, you can play up to 99 tracks in
any order. You may program the same track more than
once.
2 Use 5/∞/2/3to move
to select the
desired scene.
If there are more than 9 scenes, the digest screen
will have more than one page. In this case, pressing
¢advances to the next page, while pressing
4returns to the previous page.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
Numeric
buttons
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
2/3
CH
+
VOL-
VOL+
ENTER
CH
ON SCREEN
-
PREVIOUS
CLEAR
NEXT
ENTER
SELECT
STROBE
7
3
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
Selected scene
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
• When the lower right scene is selected, pressing 3
advances to the next page if available. Similarly, when the
upper left scene is selected, pressing 2returns to the
previous page (if available).
¶While stopped
1 Press ON SCREEN twice.
• Depending on discs, it may take some time until all scenes
of the current page appear on the TV screen. If you want to
turn the page, you do not have to wait to press 4or ¢
until all scenes appear.
The menu bar appears on the TV screen.
(See page 35 for details about menu bar.)
PROG.
2 Use 2/3to move
to
.
3 Press ENTER.
(Screen example for Audio CD)
The unit starts playback from the selected scene.
TRACK 33 TIME 25:58
NOTE
OFF
PROG. RND.
• With some discs, depending on the contents, it may
take some time until all the scenes appear on the
screen.
3 Press ENTER.
The program table appears instead of the menu bar.
The PROGRAM indicator lights in the display
window on the front panel.
Total Program Time
00:00:00
PROGRAM
No.
TrackDisc
1
2
3
4
5
2
3
7
4
3
5
6
6
7
8
9
10
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP. 7DELETES ALL.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
•
To clear the program
4 Specify tracks in the desired order using the
While stopped and the program table is shown on the
TV screen, press 7.
All the programmed tracks are erased.
numeric buttons.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10 → 3
To exit the program mode
After clearing all programmed tracks, press ON
SCREEN.
The program table is dismissed and the status bar
appears on the TV screen.
The PROGRAM indicator in the display window
disappears and the unit quits program playback
mode.
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
Up to 99 tracks can be programmed. You may
select the same track more than once.
The total program time is shown at the right top of
the program table.
NOTES
• During program playback, you cannot edit the program
contents.
The total program time
• During program playback, pressing ¢skip to the next
selection of the program. Pressing 4returns to the
beginning of the current selection.
Total Program Time
00:25:12
PROGRAM
• To dismiss the program table:
No.
TrackDisc
1
2
3
4
5
2
3
7
4
3
5
6
1
5
4
2
3
4
6
Press ON SCREEN. The program table is dismissed and
the status bar is shown.
• To dismiss the menu bar (and the status bar):
6
7
Press ON SCREEN.
8
9
10
To playback in random order
[Random playback]
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP. 7DELETES ALL.
Selected track number
If you specify a wrong track
Use 5/∞to move to the wrong track, then
press TV/VIDEO - CANCEL. The track is erased
and the subsequent programmed tracks move up.
Available :
•
•
You can play tracks on a disc in random order by using
the random function.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
To clear the program while programming
TV7
7
TV8
8
TV0
0
TV9
9
Press 7.
TV-/--
10
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
2/3
CH
+
5 Press 3to start program playback.
VOL
-
VOL+
ENTER
With a Video CD/SVCD disc, the program table is
automatically dismissed when the program
playback starts.
CH
ON SCREEN
-
PREVIOUS
CLEAR
NEXT
ENTER
SELECT
STROBE
SLOW
-
SLOW+
With an Audio CD disc, the program table remains
on the TV screen during program playback.
However, pressing the ON SCREEN button brings
up the status bar.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
When all of the programmed tracks have finished
playback, the unit stops and the program table
appears again.
¶While stopped
Note that the program remains.
1 Press ON SCREEN twice.
•
To check the program contents
The menu bar appears on the TV screen.
(See page 35 for details about menu bar)
During playback, press 7. Playback stops and the
program table is shown.
RND.
When the unit is playing back an Audio CD and the
program table is not shown, you can bring up the
table by carrying out steps 1 through 3.
During Video CD/SVCD playback, you cannot see the
program table during playback.
2 Use 2/3to move
to
.
(Screen example for Audio CD)
TRACK 33 TIME 25:58
OFF
PROG. RND.
•
To quit program playback
Press 7. Note that the program remains.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press ENTER.
English
The unit starts random playback.
Repeat playback
With a Video CD/SVCD disc, the menu bar is
automatically dismissed.
While random playback, the RANDOM indicator
lights in the display window on the front panel.
After playing all tracks of the disc, the unit stops the
disc and quits the random mode.
You can repeat playback of the current title or chapter
(for DVD VIDEO), or current or all tracks (for Audio CD/
Video CD/SVCD).
You can also repeat playback of a desired part.
To repeat the current selection or all
tracks [Repeat playback]
• The same track will not be played back more than once
during random play.
Available :
• During random playback, if you bring up the menu bar and
carry out steps 1 through 3 above, the unit cancels the
random playback mode and continues playback from the
current selection in the recorded order.
SLOW
-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
REPEAT
DIGEST ANGLE
3D
PHONIC
AMP VOL
•
To stop and quit random playback
RM-SXV008J
REMOTE CONTROL
Press 7. The unit stops playback and quits the
random playback mode.
¶For DVD VIDEO:
During playback or while stopped
For Audio CD/Video CD/SVCD:
In any condition except Video CD/
SVCD playback with PBC
NOTE
• To dismiss the menu bar:
Press ON SCREEN.
1 Press REPEAT.
Each time you press REPEAT, the repeat mode
switches among All repeat, Repeat 1 and off.
You can see the selected mode by icons in the
display window on the front panel as below.
If you press REPEAT while stopped, you need to
press 3to start repeat playback.
:
Repeats the current title for DVD VIDEO or
all tracks for Audio CD/Video CD/SVCD.
Repeats the current chapter for DVD
VIDEO or the current track for Audio CD/
Video CD/SVCD.
:
No indication:
The repeat mode is off.
(Display window)
LPCM
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
MPEG
DOLBY
DIGITAL
DTS
PROGRAM
RANDOM
Repeat mode indicators
On the TV screen, a window for repeat mode
indication appears. You can check the current
repeat mode from the window.
The mode indication on the window is same as the
one on the menu bar. (See pages 36 and 37.)
(Screen example for repeat mode Indication window)
CHAP.
•
To stop repeat playback
Press 7.
When a DVD VIDEO disc is set, the unit stops playback
and quits the repeat mode.
When an Audio CD, Video CD or SVCD disc is set, the
unit stops playback but does not quit the repeat mode.
•
To quit repeat playback
Press REPEAT until the repeat mode indicator goes off
in the display window.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
Audio CD/Video CD/SVCD
NOTES
(Screen example for Audio CD)
• You can also select the repeat mode via the menu bar.
See pages 36 and 37.
TRACK 33 TIME 25:58
• When the program playback mode is active with an
Audio CD, Video CD or SVCD, the repeat mode changes in
the same manner.
PROG. RND.
A-B
Note that, however, in the "
" mode the unit repeats all
the programmed tracks, instead of all tracks on the disc.
Selected repeat mode
• During playback in the title/chapter/track repeat mode, if
you skip the title/chapter/track using 4/¢, etc., the
destination title/chapter/track is repeated.
TRACK
:
all track repeat
• If
appears when pressing REPEAT during DVD VIDEO
playback
ALL
A-B
OFF
:
current track repeat
You cannot repeat the title or chapter because of the disc
contents.
:
repeats a desired part
(during playback only)
• Repeat playback function cannot be used during Video
CD/SVCD playback with PBC function.
To repeat a desired part
[A-B repeat playback]
4 Press ENTER at the beginning of the part you
want to repeat (point A).
The pull-down menu turns off.
Available :
A-
TV7
7
TV8
8
TV9
9
The repeat icon shows
.
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
(Screen example for DVD VIDEO)
CH
+
VOL-
VOL+
5/∞/2/3
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
ENTER
8.5Mbps
ENTER
CH
ON SCREEN
-
A-
CHAP.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
Repeat icon
SLOW-
SLOW+
¶During playback except Video CD/SVCD playback
with PBC
5 Press ENTER at the end of the part you want
to repeat (point B).
A-B
The repeat icon show
.
1 Press ON SCREEN twice.
The unit locates "A" and starts repeat playback
between "A" and "B".
The menu bar appears on the TV screen.
(See page 35 for details about menu bar.)
•
To quit A-B repeat playback
2 Use 2/3to move
to
, then press
Press ENTER. The A-B repeat mode turns off, while the
playback continues.
ENTER.
The pull-down menu for repeat mode selection
appears under the
.
• Selecting "OFF" from the pull-down menu for repeat mode
selection, or pressing 4/¢quits the A-B repeat mode
and continues playback.
3 Use 5/∞ to select "A-B".
Depending on the disc type and unit's status the
repeat mode changes as follows:
• You can also stop and quit A-B repeat mode by pressing 7.
•
During DVD VIDEO playback
NOTES
• The A and B points must be set in the same title/
chapter/track.
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
CHAP.
• To dismiss the menu bar:
A-B
Press ON SCREEN.
• If
appears when pressing ENTER during DVD VIDEO
playback
Selected repeat mode
You cannot repeat the selected portion because of the
disc contents.
CHAPTER
TITLE
:
current chapter repeat
current title repeat
:
A-B
:
repeats a desired part
(during playback only)
OFF
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use 5/∞or SUBTITLE to select the subtitle.
English
Each time you press 5/∞or SUBTITLE, the subtitle
language changes.
Changing the language,
sound and scene angle
See the following examples for subtitle selection.
•
For DVD VIDEO
With some DVD VIDEO discs, you can choose a desired
subtitle language and/or audio language/sound, as well
as a desired camera angle.
Similarly, you can choose a desired audio channel (or
channel combination) of a Video CD/SVCD disc, as well
as a subtitle channel of an SVCD disc.
Pressing 5/∞or SUBTITLE cycles among the
subtitles recorded on the disc.
Example:
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
To select the subtitle language
[SUBTITLE]
Available :
-/3 OFF
Some DVD VIDEO and SVCD discs for movies, guides,
etc. contain more than one subtitle language. You can
choose a desired one from them.
•
For SVCD
An SVCD disc can have up to four subtitles.
Pressing 5/∞cycles among those channels as
follows regardless of whether the subtitles are
recorded or not.
• At the beginning of the part where the subtitle(s) is(are)
recorded,
appears on the TV screen (except when the
-/4 OFF
1/4
"ON SCREEN GUIDE" preference is set to "OFF"). See page
52 for details about "ON SCREEN GUIDE" preference.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
2/4
TV4
4
TV5
5
TV6
6
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
3/4
CH
+
5/∞
VOL
-
VOL+
ENTER
ENTER
CH
-
4/4
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
3 Press ENTER.
REPEAT SUBTITLE AUDIO
VFP
The subtitle in the selected language is shown.
The subtitle selection window is dismissed.
PROGRESSSIVE
SCAN
ZOOM
SUBTITLE
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
NOTES
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See "Table of languages and their
abbreviations" on page 48.
¶During DVD VIDEO/SVCD playback
(except when the status bar is shown)
• The Subtitle selection window will automatically
disappear if you do not change the subtitle for several
seconds.
1 Press SUBTITLE.
The Subtitle selection window appears on the TV
screen.
• When
disc):
appears on the TV screen (for DVD VIDEO
You cannot select the subtitle or no subtitle is recorded.
• You can also select the subtitle via the menu bar. See
pages 36 and 38.
1/3
ENGLISH
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
For Video CD/SVCD
To change the audio language or sound
[AUDIO]
Each time you press 5/∞or AUDIO, the playback audio
changes as follows.
(for Video CD)
(for SVCD)
ST (stereo)
ST1
Available :
By audio selection, you can choose the audio language of
movies or enjoy KARAOKE with or without the vocal.
L
ST2
L-1
R-1
L-2
R-2
R
• At the beginning of the part where multiple audio sounds
are recorded,
appears on the TV screen (except when
the "ON SCREEN GUIDE" preference is set to "OFF"). See
page 52 for details about "ON SCREEN GUIDE" preference.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
MUTING
+10
3 Press ENTER.
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
You can hear the selected audio.
5/∞
VOL
-
VOL+
ENTER
The audio selection window is dismissed.
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
NOTES
SLOW-
SLOW+
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See "Table of languages and their
abbreviations" on page 48.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
AUDIO
3D
PHONIC
AMP VOL
• The Audio selection window will automatically
disappear if you do not change the audio for several
seconds.
RM-SXV008J
REMOTE CONTROL
• When
disc):
appears on the TV screen (for a DVD VIDEO
¶During playback
You cannot select the audio.
(except when the status bar is shown)
• If only one audio sound is recorded, you cannot select
the audio.
1 Press AUDIO.
The audio selection window appears on the TV
screen.
• You can also select the audio via the menu bar. See
pages 36 and 38.
1/3
ENGLISH
2 Use AUDIO or 5/∞to select the desired
audio.
Each time you press 5/∞or AUDIO, the audio
changes.
See the following examples for audio selection.
•
For DVD VIDEO
Each time you press 5/∞or AUDIO, the audio
language or sound changes.
Example:
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press ENTER.
English
To select a scene angle of DVD VIDEO
[ANGLE]
You can see the picture from the selected angle.
The angle selection window is dismissed.
From the angle list
Available :
¶During DVD VIDEO playback
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains "multi-angle" parts, where multiple
cameras were used to shoot the same scene from
different angles.
1 Press and hold ANGLE for more than 1
second.
Up to nine camera angles recorded on a disc
appear on the TV screen.
• At the beginning of a "multi-angle" part,
appears on the
TV screen (except when the "ON SCREEN GUIDE"
preference is set to "OFF"). See page 52 for details about
"ON SCREEN GUIDE" preference.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
The selected camera angle
2 Use 5/∞/2/3to select the desired angle.
3 Press ENTER or 3SELECT.
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
VOL
-
VOL+
ENTER
5/∞/2/3
ENTER
ANGLE
CH
-
PREVIOUS
CLEAR
NEXT
The unit starts playback by the selected angle on
the full-sized screen.
SELECT
STROBE
SELECT
3
SLOW
-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
NOTES
3D
PHONIC
AMP VOL
• The Angle selection window will automatically
disappear if you do not change the angle for several
seconds.
RM-SXV008J
REMOTE CONTROL
• When
appears on the TV screen in step 1:
The current scene is not recorded from multiple angles.
From Angle selection window
• During the operation from the angle list display, audio is
muted.
¶During DVD VIDEO playback
(except when the status bar is shown)
• You can also select the angle via the menu bar. See
page 37.
1 Press ANGLE.
The Angle selection window appears on the TV
screen.
1/3
1
2 Use ANGLE or 5/∞to select the desired
angle.
Each time you press ANGLE or 5/∞, the angle
changes.
Example:
1/3
2/3
3/3
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To zoom in/out pictures [ZOOM]
Special picture playback
and picture/sound effect
Available :
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
5
6
You can see continuous still pictures or zoom in (or out) the
picture. You can also adjust the picture character, as well as
simulate surround sound using a stereo system.
TV7
7
TV8
8
TV9
9
TV-/--
TV0
MUTING
10
0
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
VOL-
VOL+
ENTER
5/∞/2/3
CH
-
PREVIOUS
CLEAR
NEXT
To display continuous still pictures
[STROBE]
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
ZOOM +/–
3D
PHONIC
AMP VOL
Available :
RM-SXV008J
REMOTE CONTROL
CH
+
VOL-
VOL+
ENTER
CH
-
¶During playback or while paused
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
8
SLOW-
1 Press ZOOM + or –.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM –.
DIGEST ANGLE
3D
PHONIC
AMP VOL
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
RM-SXV008J
REMOTE CONTROL
Each time you press ZOOM –, the magnification is
halved (down to x 1/8).
¶ During playback
1 At the point you want to view as continuous
photographs, press 8.
The unit pauses playback.
2 Press and hold 8for more than 1 second.
Nine same frames (still picture) appear on the TV
screen.
You can advance frames one by one by the
following step.
ZOOM x 4
3 Press 8once.
The picture in the middle on the top row shows an
advanced frame from one in the left.
At the top-left of the screen, the information for the
current magnification appears. While zoomed in,
the indication for the zoomed-in position, which
can be moved by operating the next step, appears
together.
Advanced frame
2 Use 5/∞/2/3to move the zoomed position.
Each press of 8advances the frame one by one.
Pressing 3instead of 8advances each frame in
normal playback speed with a time delay over the
whole nine pictures (while the sound is muted).
ZOOM x 4
•
To return to the normal screen
Press and hold 8for more than 1 second.
NOTE
NOTES
• If you press and hold 8for more than 1 second during
playback, nine still pictures also appear but they
advance in normal playback speed (while the sound is
muted).
• To return to normal playback
Press ENTER.
• While zoomed, the picture may look coarse.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 To define a user setting, select a parameter to
be edited using 5/∞from the followings.
English
To adjust the picture character [VFP]
•
GAMMA
Available :
Controls the brightness of a shaded portion
without changing the brightness of the entire
picture.
This control is optimum when you adjust the
pictures of software which generates subdued
black in a bright room.
The VFP (Video Fine Processor) function allows you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
TV
DVD
The setting range is +4 to -4.
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
•
•
•
•
BRIGHTNESS
TV4
TV5
TV6
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
Controls the brightness of the screen.
The setting range is +16 to -16.
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
VOL-
VOL+
CONTRAST
ENTER
5/∞/2/3
ENTER
CH
-
Controls the contrast of the screen.
The setting range is +16 to -16.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
SATURATION
REPEAT SUBTITLE AUDIO
VFP
VFP -
PROGRESSIVE
SCAN
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
Controls the color depth of the screen.
The setting range is +16 to -16.
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
TINT
Controls the tint of the screen.
Use the appearance of a natural complexion as
the guideline.
¶During playback
The setting range is +16 to -16.
1 Press VFP - PROGRESSIVE SCAN.
•
•
SHARPNESS
Controls the sharpness of the screen.
The setting range is +3 to 0.
The VFP mode selection window appears on the TV
screen.
2 Use 2/3to select the desired preset.
Y DELAY
Each time you press the button, the VFP mode
changes as follows.
Controls the color gap of the screen.
The setting range is +2 to -2.
Set the video type most suitable to the current
program or the room conditions.
4 Press ENTER.
A window for setting parameters appears instead
of the VFP mode selection window.
Selected preset
NORMAL
NORMAL
GAMMA
+
4
+
5
BRIGHTNESS
CONTRAST
CINEMA
USER 1
USER 2
+13
SATURATION +13
TINT
+13
SHARPNESS
+
+
4
2
Y
DELAY
SATURATION
4
Parameter
Selected parameter
5 Adjust the level of the parameter using 5/∞.
"NORMAL" is suitable for watching TV in a general
room. "CINEMA" is suitable for watching a movie
software in a room with suppressed light.
They are factory presets and you cannot change
parameters for them.
While selecting "USER 1" or "USER 2", you can
adjust parameters that affect the picture character
and store the settings as the user preset. See the
next step.
The higher value enhances the effect.
6 Press ENTER.
The parameter is set and the VFP mode selection
window appears again.
Repeat steps 3 through 6 if you want to set other
parameters.
NOTES
• The number of setting steps depends on parameters.
• To dismiss the VFP mode selection window:
Press VFP - PROGRESSIVE SCAN.
• The window for VFP mode selection and parameter
setting disappears if no operation is made for about 10
seconds.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press 5/∞to adjust the effect level.
To simulate surround sound
[3D PHONIC]
You can select the effect level among "1" through
"5".
The higher value enhances the effect.
Available :
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
ACTION
4
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
Effect level
.
TV4
TV5
TV6
4
5
6
TV7
7
TV8
8
TV9
9
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
NOTES
• To dismiss the 3D PHONIC window:
RETURN SUBTITLE
CH
+
VOL-
VOL+
ENTER
5/∞/2/3
Press 3D PHONIC.
CH
-
PREVIOUS
CLEAR
NEXT
• The 3D PHONIC window disappears if no operation is
made for about 10 seconds.
SELECT
STROBE
SLOW-
SLOW+
• The 3D PHONIC function works correctly only when
playing back a DVD VIDEO disc recorded with the Dolby
Digital. With other sources, you cannot get any effect if
you press the 3D PHONIC button.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
3D PHONIC
• When playing back a DVD VIDEO disc recorded with the
Dolby Digital that does not contain the rear signal, you
cannot get a correct 3D PHONIC sound though you can
change the 3D PHONIC setting.
RM-SXV008J
REMOTE CONTROL
¶During playback
• The 3D PHONIC function does not affect the Dolby
Digital bitstream signal from the DIGITAL OUT jack.
1 Press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
• When you set the 3D PHONIC function is active, the
"ANALOG DOWN MIX" and "D. RANGE
COMPRESSION" setting in the "AUDIO" setting display
are disabled.
2 Select the desired mode by using 2/3.
Each time you press the button, the 3D PHONIC
mode changes as follows:
ACTION
DRAMA
ACTION
4
THEATER
NONE
Selected effect mode
•
•
•
ACTION
Suitable for action movies and sports programs
in which sounds dynamically move.
DRAMA
Natural and warm sound. You can enjoy movies
in a relaxed mood.
THEATER
You can enjoy sound effects like in a major
theater in Hollywood.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Basic operation procedure
Menu bar functions
TV
DVD
This section describes the functions you can perform via
the menu bar.
The available menu bar functions differ depending on
the disc type.
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
To bring up the menu bar
2/3
VOL-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
SLOW-
SLOW+
TV1
1
TV2
2
TV3
3
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
TV4
4
TV5
5
TV6
6
DIGEST ANGLE
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
3D
PHONIC
AMP VOL
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
RM-SXV008J
REMOTE CONTROL
VOL-
VOL+
ENTER
CH
ON SCREEN
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
1 Use 2/3to select icon you want to work with.
SLOW
-
SLOW+
The selected icon is pointed by
.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
2 Press ENTER.
With many icons, an appropriate pull-down
window appears, however, there are some
exceptions.
¶When a disc is inserted
1 Press ON SCREEN.
• See the following pages for details about each
function.
• Note that some functions are not available during
The status bar, according to the disc type, appears
on the TV screen.
See page 20 about the status bar.
playback. (You cannot move
icon when it is not available.)
to the associated
(Example of the status bar for DVD VIDEO)
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
NOTES
• When
appears on the TV screen:
2 Press ON SCREEN again.
You cannot use the selected function because of disc
contents.
The appropriate menu bar, according to the disc
type, appears together with the status bar. The
menu bar includes some icons which indicate the
associated functions.
• A mark or text on the menu icon for the function or
mode currently selected is shown in blue.
(for DVD VIDEO)
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
OFF
CHAP.
(for Audio CD)
TRACK 33 TIME 25:58
OFF
PROG. RND.
(for Video CD)
TRACK 33 TIME
25:58
25:58
OFF
(for SVCD)
OFF
PROG. RND.
ST
TRACK 33 TIME
PROG. RND.
ST1
-/4
NOTE
• To dismiss the menu bar (and status bar):
Press ON SCREEN.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Menu bar functions for DVD VIDEO
The following table shows the menu bar
functions available for DVD VIDEO.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
OFF
CHAP.
Menu icons
2
3
4
6
7
1
5
Selected Icon
Operation
Note
• If the disc has only one title and one
chapter, "TOTAL" and "TIME" shows
the same value.
Press ENTER to select the time mode among the
followings.
1
Time mode selection
(During playback only)
TOTAL
T.REM
TIME
REM
Return to initial
• TOTAL:
Current title elapsed time
Selects the time mode shown in
the display window on the front
panel and in the status bar.
• T.REM:
• TIME:
• REM:
Current title remaining time
Current chapter elapsed time
Current chapter remaining time
• If you select "OFF" during repeat
playback, the unit continues playback
without repeating.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select the repeat mode among the
followings.
2
Repeat mode
(During playback only)
CHAPTER jTITLE jA-B jOFF
• CHAPTER:Current chapter repeat
• For the subsequent operations for the
A-B repeat, see page 28.
Select the repeat mode.
• TITLE:
• A-B:
Current title repeat
Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 27 to 29 for details about the Repeat
function.)
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to playback from the specified
time.
3
Time search
Specifies the elapsed time from the
beginning of the current title, from
which the unit starts playback.
(See page 23 for details.)
• The "10" and "+10" buttons are not
used in this function.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired chapter
number.
CHAP.
4
Chapter search
• You can also locate a desired chapter
directly by specifying the chapter
number using the numeric buttons
during playback. See page 19.
(During playback only)
• For example of entering "12", press "1" then "2".
Specifies a desired chapter to be
played back from.
3 Press ENTER to playback from the specified
chapter.
• When the chapter number is incorrect:
Overwrite the incorrect number with the correct
number.
• For DVD VIDEO, the selected
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired audio language or
sound.
5
Audio selection
(During playback only)
language may be abbreviated on the
TV screen. See "Table of languages
and their abbreviations" on page 48.
Example:
Selects the audio language or
sound.
1/3 ENGLISH j2/3 FRENCH j3/3 SPANISH
3 Press ENTER to playback with the selected
audio.
(See page 30 for details about audio selection.)
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired subtitle language.
Example:
6
Subtitle selection
(During playback only)
1/3 ENGLISH j2/3 FRENCH j3/3 SPANISH j-/3
OFF
Selects the subtitle language.
3 Press ENTER to playback with the selected
subtitle.
(See page 29 for details about subtitle selection.)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Selected Icon
Operation
Note
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a scene angle.
Example:
1/3 j2/3 j3/3
3 Press ENTER to playback with the selected
scene angle.
7
Angle selection
(during playback only)
Selects a desired scene angle in
the multi-angle part.
(See page 31 for details about angle selection.)
Menu bar functions for Audio CD/Video CD/SVCD
TRACK 33 TIME 25:58
OFF
2
OFF
2
OFF
2
PROG. RND.
Menu icons
The following table shows the menu bar
functions available for Audio CD/Video CD/
SVCD.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
3
3
3
4
1
1
1
5
TRACK 33 TIME
25:58
25:58
PROG. RND.
ST
Menu icons
4
5
6
TRACK 33 TIME
PROG. RND.
ST1
-/4
Menu icons
4
5
6
7
Selected Icon
Operation
Note
Press ENTER to select the time mode among the
followings.
• When you select "REM" while
stopped, you can change the track
by pressing 4or ¢.
Return to initial
1
Time mode selection
TIME
REM
TOTAL
T.REM
Selects the time mode shown in
the display window on the front
panel and in the status bar.
• TIME:
Current track elapsed time
• During stopped, "REM show the
recording time of the current track,
while "T.REM" show the total time of
the disc.
• REM:
Current track remaining time
Disc elapsed time
• TOTAL:
• T.REM:
Disc remaining time
• If you select "OFF" during repeat
playback, the unit continues
playback without repeating.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select the repeat mode among the
followings.
2
Repeat mode
Select the repeat mode.
• For the subsequent operations for
the A-B repeat, see page 28.
OFF jTRACK jALL jA-B jOFF
• TRACK: Current track repeat
• ALL:
• A-B:
All track repeat
Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 27 to 29 for details about the Repeat
function.)
• This function cannot be used during
program playback.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to playback from the specified
time.
3
Time search
(Except during Video CD/SVCD
playback with PBC)
(See page 23 for details.)
Specifies the elapsed time from
the beginning of the disc, from
which the unit starts playback.
1 Press ENTER to bring up the program table.
2 Specify tracks in the desired order using the
numeric buttons.
PROG.
4
Program
(While stopped only)
3 Press 3to start program playback.
Specifies the playback order of
tracks.
(See page 25 for details.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Selected Icon
Operation
Note
1 Press ENTER to activate random playback.
(See page 26 for details.)
5
RND.
Random
(While stopped only)
Activates random playback.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired audio channel(s).
3 Press ENTER to playback with the selected
audio channel(s).
6
Audio selection
(During Video CD/SVCD playback
only)
(See page 30 for details about audio selection.)
Selects the audio channel(s).
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired subtitle.
3 Press ENTER to playback with the selected
subtitle.
7
Subtitle selection
(During SVCD playback only)
Selects the subtitle.
(See page 29 for details about subtitle selection.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
The unit can play back MP3 files on a private CD-R/RW
disc or commercial CD. We refer to a disc that contains
MP3 file as an "MP3 disc" in this manual.
Though available functions with MP3 discs are limited,
operations for the available functions are similar to those
with Audio CD discs.
Note that, if a disc contains both of MP3 and JPEG files,
you can only play back files of either type selected by the
MP3/JPEG setting in the PICTURE preference
display.(See page 50.)
English
English
English
NOTES for making a private MP3 disc
using a CD-R/CD-RW disc:
• Select "ISO 9660" as the disc format.
• Finalize the disc after completing recording.
• We recommend to record a material at 44.1-kHz Fs and
at the 128-kbps data transfer rate.
NOTES
• The unit does not support "packet write" discs.
What is MP3?
• The unit does not support the ID3 tag.
• If the disc is recorded with multiple sessions, the unit
supports up to five sessions.
"MP3" stands for "MPEG Audio Layer-3", and is the
part of the MPEG standard. It can store high quality
stereo audio using very little space by only saving the
audible sounds and discarding the sounds your ears
won't pick up. A CD can store up to around 10 hours of
MP3 audio, which is 10 times as much as Audio CD.
• Some discs may not be played back because of the disc
characteristics or recording condition.
• The unit does not output a digital audio signal from
DIGITAL OUT when playing back a MP3 disc.
• You cannot playback Tracks in the desired (programmed)
or random order.
NOTE
• The unit only can play back Tracks with any of the
following file extensions; ".MP3", ".Mp3", ".mp3" and
".mP3".
Make sure that the TV - DVD switch on
the remote control unit is set to "DVD"
when using the 5/∞/2/3and numeric
buttons for controlling the unit.
TV
DVD
• Time required for reading the disc contents differs with
discs, depending on the numbers of Groups (folders) and
Tracks (files) recorded, etc.
About MP3 disc
• While an MP3 disc is loaded, you cannot bring up any
preference display. (See page 47.)
On an MP3 disc, each material (song) is recorded on a
file. Files are sometimes grouped into a folder by artist,
album, category, etc. In addition, a folder can be a
member of another folder, creating hierarchical folder
layers. If you are familiar with a personal computer, you
may easily understand the hierarchical file/folder
construction of MP3 discs.
Operations
Basic operations
Available :
This unit simplifies the hierarchical construction of a disc
and manages files and folders by "Tracks" and "Groups"
in the following manners.
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
VOL-
VOL+
Basic control
buttons
ENTER
• Each file is regarded as a Track.
• A folder which has one or more files (Tracks) is
regarded as a Group.
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
SLOW-
• A folders' folder which does not manage any file
directly is ignored.
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
• Files which do not belong to any folder are grouped
into "Group 1".
3D
PHONIC
AMP VOL
• The unit recognizes up to 150 Tracks per Group, and up
to 99 Groups per disc. It ignores those exceeding the
maximum numbers and cannot play back them. If
there is any type of files other than MP3 files in a
folder. those files are also counted down from the total
number of 150.
The following table shows basic functions of basic
control buttons.
Buttons
Functions
Starts playback while stopped.
ENTER
Starts playback while stopped or
paused.
3
7
8
Group 1
Group 2
Stops playback.
Pauses playback.
up to 99 Groups
per disc
Group 1'
Track 1
Skips back or forward a Track in the
Group* during playback.
Selects the previous or next Track in the
Group* while stopped.
up to 150 Tracks per Group
4/¢
*You can skip a Track across a Group.
• If you press 3during playback, or press 7to stop
playback followed by 3, the unit starts playback from
the beginning of the current track.
• The 2/3buttons work the same as the 4/¢button.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
2 Move the bar to a desired Group using 5/∞.
NOTES
On the right column, Tracks in the selected Group
are shown.
• The current Group and Track number are shown on the
display window in the following manner.
When selecting a Group, Track 1 is initially selected
(highlighted).
LPCM
-
VCDVD
GROUP TITLE TRACK CHAP
1
A B
MDOPELBGY 38
PROGRAM
DIGITAL
DTS
RANDOM
3 Select a desired Track using 4/¢, then
press ENTER or 3.
Current Group CurrentTrack
number number
Current track
elapsed time
or
Use the numeric buttons to directly specify a
desired Track number.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
• You cannot advance or reverse playback of an MP3 disc
rapidly.
• You cannot see any other time information but the
current track elapsed time.
Selecting the desired Group
and Track
Available :
When loading an MP3 disc, after the disc contents are
read, the MP3 CONTROL display automatically appears
on the TV screen.
The unit starts playback from the selected Track.
In the MP3 CONTROL display and the display window
on the front panel, you can see the current Group and
Track numbers, as well as Track elapsed time.
MP3 CONTROL
Group : 01 / 10
Track : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
Current Track elapsed time
MP3 CONTROL
Group : 01 / 10
Time : 00:03:08
Track : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
You can specify the desired Group/Track from the display
by the following procedure.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
Group
column
Track column of the
current Group
Selected
Track
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
• You can also select a desired Track by pressing 3to move
the black bar to the right (Track) column then using 5/∞.
5/∞
VOL-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
NOTES
4/¢
SLOW-
SLOW+
• If a MP3 file name includes any 2-byte character, the unit
may not show the file name correctly.
3
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
• Only MP3 files are shown on the MP3 CONTROL display.
3D
PHONIC
AMP VOL
• The order of Groups/Tracks shown in the MP3
CONTROL display may differ from the order shown on
your personal computer when you set the disc on your
computer.
RM-SXV008J
REMOTE CONTROL
¶When the MP3 CONTROL display is shown.
1 Make sure that the black (cursor) bar is in the
left (Group) column.
If it is in the right column, press 2to move it to the
left column.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
Available :
English
English
English
Direct selection
Repeat playback
Available :
You can repeat playback of the current Track, current
You can select a desired Group directly by specifying the
Group number.
Group or all MP3 files on the disc.
ENTER
CH
-
TV
DVD
STANDBY/ON
PREVIOUS
CLEAR
NEXT
OPEN/
CLOSE
TV
DVD
SELECT
STROBE
TV1
1
TV2
2
TV3
3
SLOW-
SLOW+
TV4
TV5
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
REPEAT SUBTITLE AUDIO
VFP
MUTING
REPEAT
PROGRESSSIVE
SCAN
ZOOM
+10
DIGEST ANGLE
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
3D
PHONIC
AMP VOL
CH
+
TITLE/GROUP
VOL-
VOL+
ENTER
RM-SXV008J
REMOTE CONTROL
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
¶During playback or while stopped
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
1 Press REPEAT.
3D
PHONIC
AMP VOL
Each time you press REPEAT, the repeat mode
changes as follows. You can see the current mode
via the display window as well as the MP3
CONTROL display.
If you press REPEAT while stopped, you need to
press ENTER or 3to start repeat playback.
RM-SXV008J
REMOTE CONTROL
¶During playback or while stopped
1 Press TITLE/GROUP.
MP3 CONTROL Display
Function
"--" is shown in the Group display area of the
display window.
display
Window
REPEAT TRACK
Repeats the current
Track.
(Example for the indication of window)
REPEAT GROUP
REPEAT ALL
Repeats all Tracks in
the current Group.
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
Repeats all Tracks on
the disc.
Group
Current track
No indication
(TV screen)
The repeat mode is off.
display area number
Selected repeat mode
2 Use the numeric buttons to specify a desired
Group number.
MP3 CONTROL
Group : 01 / 10
REPEAT TRACK
Track : 01 / 06 (Total 28)
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
Examples:
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
(Display window)
LPCM
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows "--" for the Group number, instead
of the current Group number).
MPEG
DOLBY
DIGITAL
DTS
PROGRAM
RANDOM
Repeat mode indicator
The unit starts playback from Track 1 of the selected
Group.
•
•
To stop repeat playback
Press 7. Note that the repeat mode remains.
3 Use the numeric buttons to specify a desired
To quit repeat playback
Track number.
During playback, press REPEAT as many times until
no repeat icon is shown on the display window.
While stopped, press REPEAT as many times until
repeat mode indication on the MP3 CONTROL display
goes off.
The unit starts playback from the specified Track.
You can also use 4/¢or 5/∞for specifying a
track, instead of the numeric buttons.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
The unit can play back JPEG files on a private CD-R/RW
disc. We refer to a disc that contains JPEG files as a
"JPEG disc" in this manual.
Note that, if a disc contains both of MP3 and JPEG files,
you can only play back files of either type selected by the
MP3/JPEG setting in the PICTURE preference display
(See page 50).
NOTES for making a private JPEG disc
using a CD-R/CD-RW disc:
• Select "ISO 9660" as the disc format.
• Finalize the disc after completing recording.
• We recommend to record a material at "640 x 480"
resolution.
• The unit supports only the baseline JPEG type,
therefore, it cannot display pictures of the other types
(progressive and lossless). If a JPEG disc contains JPEG
files of non-baseline type, the unit recognizes those
files as JPEG files. the JPEG CONTROL display and the
display window shows the information of the contents
(filename, file number, etc.), but you cannot show the
still pictures of those files (the TV screen appears only
in black.)
What is JPEG?
"JPEG" is an abbreviation for the Joint Photographic
Experts Group and is an image format that utilizes a
compression technique.
There are three sub-types of the JPEG format as
follows.
• baseline JPEG: used for digital cameras, web, etc.
• progressive JPEG: used for web
• lossless JPEG: an old type and rarely used now
The unit supports only the baseline JPEG type,
therefore, it cannot display pictures of the other types
(progressive and lossless). If a JPEG disc contains
JPEG files of non-baseline type, the unit recognizes
those files as JPEG files, the JPEG CONTROL display
and the display window shows the information of the
contents (filename, file number, etc.), but you cannot
show the still pictures of those files (the TV screen
appears only in black.)
NOTES
• The unit does not support "packet write" discs.
• If the disc is recorded with multiple sessions, the unit
supports up to five sessions.
• Some disc may not be played back, or take some time to
open the whole picture because of the disc characteristics
or recording condition.
• You cannot playback files in the desired (programmed)
or random order.
• The screen saver function is activated while same
picture is displayed for more than 5 minutes except
during slide show playback (See page 44.)
NOTE
Make sure that the TV - DVD switch on
• The unit only can play back files with any of the
following file extensions; ".jpg", ".jpeg", ".JPG",
".JPEG" and any uppercase and lowercase combination
(such as ".Jpg").
the remote control unit is set to "DVD"
when using the 5/∞/2/3, numeric
buttons for controlling the unit.
TV
DVD
• If a JPEG file name includes any 2-byte character, the
unit may not show the file name correctly.
About JPEG disc
• When a picture resolution is more than "640 x 480", it
takes some time to open the whole picture.
On an JPEG disc, each material (still picture) is recorded on
a file. Files may be grouped into a folder by category, etc. In
addition, a folder can be a member of another folder,
creating hierarchical folder layers. If you are familiar with a
personal computer, you may easily understand the
hierarchical file/folder construction of JPEG discs.
This unit simplifies the hierarchical construction of a disc
and manages folders by "Groups" in the following
manners.
• Carry out an operation after opening the whole
picture.The unit does not accept any operation
(Stopping the unit, zooming in/out a picture etc.) while
opening the picture.
• Time required for reading the disc contents differs with
discs, depending on the numbers of Groups (folders)
and files recorded, etc.
•
If you play back a non-baseline JPEG file:
The unit cannot display the still picture of the file. (the
TV screen appears only in black.) In this case, other
operations (such as stopping playback, selecting a
file,etc.) are possible but may take a long time.
• A folder which has one or more files is regarded as a
Group.
• A folders' folder which does not manage any file
directly is ignored.
• Files which do not belong to any folder are grouped
into "Group 1".
• While a JPEG disc is loaded, you cannot bring up any
preference display (See page 47.)
• The unit recognizes up to 150 files per Group, and up
to 99 Groups per disc. It ignores those exceeding the
maximum numbers and cannot play back them. If
there is any type of files other than JPEG files in a
folder. those files are also counted down from the total
number of 150.
Group 1
Group 2
up to 99 Groups
per disc
Group 1'
file 1
up to 150 files per directory
42
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
3 Select a desired file using 4/¢.
English
English
English
Basic operations
4 Press ENTER.
The selected file (still picture) is shown on the TV.
In the display window, you can see the current
Group and file numbers.
To see a desired picture
JPEG
Available :
JPEG CONTROL
When loading a JPEG disc, after the disc contents are
read, the JPEG CONTROL display automatically appears
on the TV screen.
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
sumer
fall
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
winter
sea
mountain
camp
picnic
skiing
flower
orchard grass.jpg
petunia.jpg
north pole.jpg
JPEG CONTROL
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
sumer
fall
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
winter
sea
mountain
camp
picnic
skiing
flower
orchard grass.jpg
petunia.jpg
north pole.jpg
Group
column
File column of the
current Group
Selected
file
• You can also select a desired file by pressing 3to move the
black bar to the right (file) column then using 5/∞.
You can select a desired file for playback via this display.
• To return the black bar to the Group column, press 2.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
•
•
To playback another picture:
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
Use 4/¢or 5/∞to select the desired picture.
You can select a picture in another Group.
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
To dismiss the picture:
Press 7or MENU.
5/∞
VOL-
VOL+
ENTER
ENTER
CH
-
The TV screen returns to show the JPEG CONTROL
display.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
4/¢
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
NOTES
3D
PHONIC
AMP VOL
• The current Group and file number are also shown on
the display window in the following manner.
RM-SXV008J
REMOTE CONTROL
LPCM
-
VCDVD
GROUP TITLE TRACK CHAP
1
A B
MDOPELBGY 38
PROGRAM
DIGITAL
DTS
RANDOM
¶When the JPEG CONTROL display is shown
Current Group
number
Current file
number
1 Make sure that the black (cursor) bar is in the
left (Group) column.
• Only JPEG files are shown on the display window.
If it is in the right column, press 2to move it to the
left column.
2 Move the bar to a desired Group using 5/∞.
On the right column, files in the selected Group are
shown.
When selecting a Group, file 1 is initially selected
(highlighted).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
To zoom in/out the picture [ZOOM]
To see pictures continuously
[slide-show mode]
You can see files (still pictures) one after another
automatically in the slide show mode.
JPEG
Available :
4
TV7
7
5
TV8
8
6
TV9
9
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
VOL-
VOL+
In this mode, each file (still picture) is shown on the TV
for approximately 3 seconds and then automatically
changed to the next file one after another.
ENTER
5/∞/2/3
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
Playback pictures from the beginning
of the disc
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
ZOOM +/–
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
JPEG
Available :
¶During JPEG picture is shown on the TV screen
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
1 Press ZOOM + or –.
TV4
TV5
TV6
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM –.
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
CH
+
VOL-
VOL+
ENTER
CH
-
Each time you press ZOOM –, the magnification is
halved (down to x 1/8).
PREVIOUS
CLEAR
NEXT
3
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
¶After inserting a JPEG disc
1 Press 3.
ZOOM x 4
The slide show starts from the beginning of the
disc.
NOTES
• To stop slide-show playback (to dismiss the picture) in
the middle of the slide-show playback:
Press 7 or MENU.
The TV screen returns to show the JPEG CONTROL
display.
At the top-left of the screen, the information for the
current magnification appears. While zoomed in,
the indication for the zoomed-in position, which
can be moved by operating the next step, appears
together.
Pressing 3resumes slide show playback from the last
picture you opened.
• To keep showing a current picture during the slide show
Press 8or ENTER.
2 Use 5/∞/2/3to move the zoomed position.
The picture does not change to the next picture.
Pressing 3resumes the slide show playback from the
next picture.
ZOOM x 4
• If a black screen appears continuously in the slide-show
playback:
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again (e.g., pressing 7or MENU to open the JPEG
CONTROL display, etc.)
Note that it may take a long time to select another file.
NOTES
• Even in the slide-show mode, you can zoom in or out a
picture while paused (see the next column).
• To return to normal screen:
Press ENTER.
• While zoomed, the picture may look coarse.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
Direct selection
¶During playback or while stopped
English
English
English
Selecting the start point of the slide
show
1 Press TITLE/GROUP.
"--" is shown in the Group display area of the
display window.
JPEG
Available :
(Example for the indication of display window)
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
PROGRAM
Numeric
buttons
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
RANDOM
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
Group
display area
Current track
number
CH
+
TITLE/GROUP
5/∞
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
4/¢
2 Use the numeric buttons to specify a desired
SELECT
STROBE
SLOW-
SLOW+
Group number.
REPEAT SUBTITLE AUDIO
VFP
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
Examples:
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
From the JPEG CONTROL display
¶During JPEG CONTROL display is shown
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows "--" for the Group number, instead
of the current Group number).
1 Make sure that the black (cursor) bar is in the
left (Group) column.
If it is in the right column, press 2to move it to the
left column.
3 Use the numeric buttons to specify a desired
Track number.
JPEG CONTROL
Group : 01 / 10
File : 01 / 06 (Total 28)
You can specify the Track number according to the
order in the JPEG CONTROL display. You must
specify a Track number within 5 seconds after
carrying out step 2.
The unit starts slide show playback from the
specified Track. If you do not specify a Track
number, the unit starts slide show playback from
the first Track in the Group.
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
• You can skip a file in the slide show by using 4/¢or
5/∞.
• You can select a file in the current group by using the
numeric buttons.
2 Move the bar to a desired Group using 5/∞.
On the right column, files in the selected Group are
NOTES
shown.
• To stop slide-show playback (to dismiss the picture) in
the middle of the slide-show playback:
When selecting a Group, file 1 is initially selected
(highlighted).
Press 7 or MENU.
The TV screen returns to show the JPEG CONTROL
display.
3 Select a desired file using 4/¢.
Pressing 3resumes slide show playback from the last
picture you opened.
4 Press 3.
The slide show starts from the specified file.
• To keep showing a current picture during the slide show
Press 8or ENTER.
The picture does not change to the next picture.
Pressing 3resumes the slide show playback from the
next picture.
• If a black screen appears continuously in the slide-show
playback:
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again (e.g., pressing 7or MENU to open the JPEG
CONTROL display, etc.)
Note that it may take a long time to select another file.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
•
•
To stop repeat playback
Repeat function
Press 7. Note that the repeat mode remains.
To quit repeat playback
JPEG
Available :
During playback, press REPEAT as many times until
no repeat icon is shown on the display window.
While stopped, press REPEAT as many times until
repeat mode indication on the JPEG CONTROL
display goes off.
In the slide-show mode, you can repeat playback of JPEG
files in a Group or on the disc.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
REPEAT
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
¶During playback or while stopped
1 Press REPEAT.
Pressing REPEAT switches the repeat mode.
If you press REPEAT while stopped, you need to
press 3to start repeat playback.
The mode is shown in the display window by icons,
while on the JPEG CONTROL display by mode
names, as follows.
JPEG
CONTROL
display
Display
Window
Function
REPEAT ALL
All tracks on the disc are
repeated.
REPEAT GROUP
No indication
All Tracks in the current
Group are repeated.
The repeat mode is off.
(TV Screen)
Selected repeat mode
JPEG CONTROL
Group : 01 / 10
REPEAT GROUP
File : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
(Display window)
LPCM
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
MPEG
DOLBY
DIGITAL
DTS
PROGRAM
RANDOM
Repeat mode indicator
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
NOTE
How to set preferences
Make sure that the TV - DVD switch on
the remote control unit is set to "DVD"
when using the 5/∞/2/3and numeric
buttons for controlling the unit.
TV
DVD
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
7
TV-/--
10
TV8
8
TV0
0
TV9
9
MUTING
+10
Selecting preferences
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
ENTER
CH
+
This chapter refers to the settings which are already
made when you purchase the unit (when the machine is
shipped from the factory). Read this section when you
want to connect this machine to a wide-vision TV set or
change the settings according to the environment you
use this machine.
VOL
-
VOL+
ENTER
5/∞/2/3
CH
CHOICE
¶While stopped
1 Press CHOICE.
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
One of the Preference on-screen displays appears
on the TV screen.
About the Preference display
The preference display consists of the LANGUAGE,
PICTURE, AUDIO, and OTHERS setting displays, each
having setting items.
You can see four icons at the top right of the on-
screen display for the settings.
: Setting menu for language
: Setting menu for pictures
: Setting menu for sound
•
LANGUAGE
LANGUAGE
: Setting menu for the systems, etc.
MENU LANGUAGE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE
2 Select the appropriate icon using 2/3.
ON SCREEN LANGUAGE
The appropriate display appears on the TV screen.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
3 Move
to select the item you want to edit by
using 5/∞.
The color of the selected item changes.
•
•
•
PICTURE
4 Press ENTER.
PICTURE
MONITOR TYPE
The pull-down menu appears over the selected
item.
4:3 L.B.
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
AUTO
ON
MP3
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
AUDIO
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
AUDIO
Selected item
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D RANGE COMPRESSION
STREAM/PCM
STEREO
ON
5 Press 5/∞to select from options and press
ENTER.
The selected option is set.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
• For details about each setting, see the following.
NOTES
OTHERS
• To dismiss a preference display:
Press CHOICE.
OTHERS
RESUME
ON
• While an MP3 or JPEG disc is loaded, you cannot bring
up any preference display.
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
DVD1
AV COMPULINK MODE
PARENTAL LOCK
• When a preference display is shown on a wide TV
screen, the upper and lower parts of the TV picture
sometimes may be cut off. In such a case, adjust the
picture size control of the TV.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
LANGUAGE page
This page allows you to select languages concerning with DVD VIDEO disc
playback, as well as the on-screen display language of the unit.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
NOTES
ON SCREEN LANGUAGE
• During playback, you can bring up any page of the preference displays, however,
only "ON SCREEN LANGUAGE" can be set on the "LANGUAGE" page.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu item
Setting options
Notes/examples
• If the selected language is not
recorded, the disc's default
language is selected.
• For details about language code, see
"Table of languages and their
abbreviations" at the bottom of this
page.
MENU LANGUAGE
ENGLISH jSPANISH jFRENCH
jCHINESE jGERMAN j
ITALIAN jJAPANESE jlanguage
code from AA to ZU
You can select the default menu
language to be displayed if it is
contained on a DVD VIDEO disc.
AUDIO LANGUAGE
You can select the default audio
language to be played if it is
contained on a DVD VIDEO disc.
SUBTITLE
OFF jENGLISH jSPANISH j
FRENCH jCHINESE jGERMAN
jITALIAN jJAPANESE j
language code from AA to ZU
You can select the default subtitle
language to be displayed if it is
contained on a DVD VIDEO disc.
ON SCREEN LANGUAGE
IDIOMA EN PANTALLA
LANGUE D' ECRAN
ENGLISH
ESPAÑOL
FRANCAIS
ON SCREEN LANGUAGE
You can select the on-screen
display language of the unit.
ENGLISH jSPANISH jFRENCH
English
Spanish
French
• Some on-screen messages are
shown in English regardless of the
setting.
• You cannot change the on-screen
language shown on the MP3 and
JPEG CONTROL displays.
Table of languages and their abbreviations
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Afar
FA
FI
FJ
Persian
Finnish
Fiji
Faroese
Frisian
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
(Afan) Oromo
Oriya
Panjabi
SU
SV
SW
TA
TE
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
FO
FY
GA
GD
GL
GN
GU
HA
HI
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance TI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Irish
TG
TH
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
TK
TL
LV
MG
MI
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Hindi
Bislama
Bengali, Bangla HU
HR
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
Tibetan
Breton
Catalan
Corsican
Czech
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Twi
Ukrainian
Urdu
SK
SL
Uzbek
Welsh
SM
SN
SO
SQ
SR
SS
ST
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Javanese
Georgian
Kazakh
EO
ET
EU
Norwegian
Occitan
Siswati
Sesotho
Greenlandic
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
PICTURE page
This page allows you to select desired options concerning with a picture or
monitor screen.
PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
4:3 L.B.
AUTO
ON
MP3
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu item
Setting options
Notes/examples
MONITOR TYPE
•
16:9 NORMAL (Wide Television
screen)
You can select the monitor type to
match your TV when you playback
DVD VIDEO discs recorded for wide
screen televisions.
Should be selected when you
connect the unit to a wide-screen
(16:9) TV whose aspect ratio is fixed
to 16:9 (the unit automatically
adjusts the screen width of the
output signal correctly when
playing back a "4:3" source).
• If you playback a "4:3" DVD VIDEO
source with the "16:9 NORMAL"
mode, the picture character slightly
changes due to the process for
converting the picture width.
•
•
16:9 AUTO (Wide Television screen)
Should be selected when you
connect a wide-screen (16:9) TV to
the unit.
4:3 LB. (Letter Box Conversion)
Should be selected when you
connect a normal (4:3) TV to the
unit.
When playing back a DVD VIDEO
disc recorded by the wide picture
format, the picture is shown with
black bars at the top and bottom.
•
4:3 PS. (Pan Scan Conversion)
Should be selected when you
connect a normal(4:3) TV to the
unit.
When playing back a DVD VIDEO
disc recorded by the wide picture
format, the picture is automatically
zoomed and the left and right sides
are chopped off.
• With some discs recorded by the
wide picture format, the picture is
shown in the 4:3 LB mode even if
you select the 4:3 PS mode.
PROGRESSIVE MODE
•
•
•
VIDEO
• When progressive scan mode is
active, the PROGRESSIVE indicator
is lit. Note that the color of indication
changes depending on this setting,
source type and the unit’s status.
(See pages 7 and 8.)
• Some DVD VIDEO discs may not be
played back correctly with the
"AUTO" mode. If the playback
picture is unclear or noisy with a
particular DVD VIDEO disc, try to
change the mode
When the unit is in the progressive
scan mode, you can select a desired
mode from three options.
Suitable for playing back a video
source disc.
FILM
Normally, set to "AUTO".
Suitable for playing back a film or
progressive source disc.
AUTO
Used to playback a disc containing
both video and film source
materials.
The unit recognizes the picture type
(film or video source) of the current
disc according to the disc
information.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
Menu item
Setting options
Notes/examples
SCREEN SAVER
•
•
•
ON
You can select the screen saver
function ON or OFF.
See page 15 for details about screen
saver function.
The current picture gets dark.
OFF
The screen saver function is off.
• When a disc contains either MP3 or
JPEG files, the unit can play back the
files regardless of the setting.
MP3/JPEG
MP3
The unit can playback MP3 and
JPEG files recorded on a CD-R/CD-
RW disc, however, if a disc contains
both of MP3 and JPEG files, you can
only playback files of either type
selected by this menu item.
MP3 files can be played back if a disc
contains both of MP3 and JPEG files.
•
JPEG
JPEG files can be played back if a disc
contains both of MP3 and JPEG files.
AUDIO page
This page allows you to select desired options concerning with audio sound.
AUDIO
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
STREAM/PCM
STEREO
ON
D RANGE COMPRESSION
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu item
Setting options
Notes/examples
DIGITAL AUDIO OUTPUT
•
•
PCM ONLY
• When playing a DVD VIDEO or
Audio CD disc with DTS, use a DTS
decoder to get correct signals from
your speakers.
• With some DVD VIDEO discs that are
not fully copy-protected, a 20 or 24
bit digital signal may be output.
• A signal with the 88.2 kHz or more
sampling frequency cannot be
output from the DIGITAL OUT jack,
regardless of the setting (due to the
copy protection issue).
To connect the unit's digital output to
an external device equipped with a
digital input, this item must be set
correctly.
See the table below for details
about the relation between the
setting and output signals.
Should be selected when you
connect the DIGITAL OUT jack of the
unit to the linear PCM digital input
of other audio equipment.
DOLBY DIGITAL/PCM
Should be selected when you
connect the digital input of a Dolby
Digital decoder or an amplifier with
a built-in Dolby Digital decoder.
When this option is selected,
playing back a disc recorded by the
DTS or MPEG Multichannel format
outputs a linear PCM digital signal.
• MP3 digital audio data cannot be
output.
•
STREAM/PCM
Should be selected when you
connect the digital input of an
amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital
decoder, or the stand-alone unit of
such a decoder.
Digital output signal chart
Output
Playback discs
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
48/44.1 kHz,16 bit, stereo linear PCM
No output
DVD with 96/88.2 kHz, 16/22/24
bit linear PCM
DVD with DTS
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
44.1 kHz,16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
No output
DTS bitstream
DVD with Dolby Digital
DVD with MPEG Multichannel
Audio CD/Video CD/SVCD
Audio CD with DTS
Dolby Digital bitstream
MPEG bitstream
DTS bitstream
CD-R/RW with MP3
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
Menu item
Setting options
Notes/examples
ANALOG DOWN MIX
•
•
DOLBY SURROUND
• This function does not work when
the 3D PHONIC function is activated.
(See page 34.)
• This setting affects only the output
signal from the analog AUDIO OUT
jacks when playing back a DVD
VIDEO disc recorded with surround
multichannel audio.
To playback a DVD VIDEO disc
recorded with surround
multichannel audio correctly, this
setting must be properly made
according to your audio system.
Should be selected when you enjoy
multichannel surround audio by
connecting the unit's analog AUDIO
OUT to a surround decoder.
STEREO
Should be selected when you enjoy
conventional 2-channel stereo
audio by connecting the unit's
analog AUDIO OUT to a stereo
amplifier/receiver or television set,
or when you duplicate audio of a
DVD VIDEO disc recorded with
surround audio to your MD,
cassette, etc.
D. RANGE COMPRESSION
When enjoying a DVD VIDEO disc
recorded with the Dolby Digital
format at low or middle volume,
this setting makes you hear sound
comfortably
•
•
AUTO
• This function works only when
playing back a disc recorded with
Dolby Digital. The setting is not
effective for other discs.
• This function does not work when
the 3D PHONIC function is
Audio is played back with the
dynamic range compressed
except when playing a disc
recorded with Dolby Digital 1- or 2-
channel format.
activated.(See page 34.)
ON
Audio is always played back with
the dynamic range compressed.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
OTHERS page
This page allows you to select desired options concerning with the system.
OTHERS
RESUME
ON
ON SCREEN GUIDE
AUTO STANDBY
AV COMPULINK MODE
PARENTAL LOCK
ON
OFF
DVD1
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu item
Setting options
Notes/examples
RESUME
•
ON
• See page 17 for details about
resume playback function.
You can select the resume playback
mode.
The unit can resume playback of the
disc from the position you
interrupted playback last time if it is
still on the tray.
•
•
OFF
The resume function is not active.
DISC RESUME
The unit can resume playback of
last 30 discs (the unit keeps
memory positions even if a disc is
removed from the tray).
ON SCREEN GUIDE
•
•
ON
• See page 15 about on-screen guide
icons.
• Examples of "on-screen guide" icons
The unit can display "on-screen
guide" icons or characters on the
picture, which show what is
happening to the disc or the unit.
The on-screen guide will be displayed.
OFF
or characters:
,
,
The on-screen guide will not be
displayed.
AUTO STANDBY
OFF j60 j30
When the unit is stopped for more
than 30 minutes or 60 minutes, the
unit enters standby mode
automatically.
AV COMPULINK MODE
If you use the AV COMPU LINK
system, you must set this item
correctly.
DVD 1jDVD 2 jDVD 3
• See page 58 for details about AV
COMPU LINK function.
PARENTAL LOCK
(PARENTAL LOCK display)
See page 53 for details about the
Parental Lock setting.
When selecting this option,
pressing ENTER on the remote
control unit brings up the
"PARENTAL LOCK" display shown
below, in which you can restrict
playback of DVD VIDEO discs for
children.
PARENTAL LOCK
COUNTRY CODE
LEVEL
US
NONE
_ _ _ _
PASSWORD
EXIT
...
SELECT
ENTER
NEW PASSWORD? PRESS 0 ~ 9 KEY
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
To set Parental Lock for the first time
[PARENTAL LOCK]
Limiting playback by
children
Available :
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according to the
level set by the user. For example, if a movie which
includes violent scenes supports the parental lock
feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
When selecting "PARENTAL LOCK" in the "OTHERS" page
of the preference display (see page 52), pressing ENTER
on the remote control unit brings up the PARENTAL
LOCK sub-page shown below, in which you can make
setting for limiting playback.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
Numeric
buttons
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
CH
+
VOL-
VOL+
ENTER
5/∞
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
(OTHERS display)
DIGEST ANGLE
3D
PHONIC
AMP VOL
OTHERS
RESUME
ON
RM-SXV008J
REMOTE CONTROL
ON SCREEN GUIDE
AUTO STANDBY
AV COMPULINK MODE
PARENTAL LOCK
ON
60
DVD1
¶While the "OTHERS" page of the preference display is
shown
1 Use 5/∞to move
to select "PARENTAL
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
LOCK" and press ENTER.
See page 52 for details about how to bring up the
"OTHERS" page.
The Parental Lock on-screen display appears on the
TV screen.
Press ENTER.
(PARENTAL LOCK display)
PARENTAL LOCK
points [COUNTRY CODE].
COUNTRY CODE
LEVEL
US
NONE
_ _ _ _
PASSWORD
EXIT
2 While
points [COUNTRY CODE], press
ENTER to bring up the pull-down menu.
3 Use 5/∞to select the country code.
...
SELECT
ENTER
NEW PASSWORD? PRESS 0 ~ 9 KEY
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See "Appendix A: Country code list for Parental
Lock" on page 63.
PARENTAL LOCK
COUNTRY CODE
LEVEL
US
UG
UM
US
UY
UZ
VA
VC
NONE
_ _ _ _
PASSWORD
EXIT
SELECT
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER
4 Press ENTER.
moves to [SET LEVEL].
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
5 While
points [LEVEL], press ENTER to
To change the settings
[PARENTAL LOCK]
bring up the pull-down menu.
In the pull-down menu, “NONE” and level "1"
through "8" are available.
"NONE" does not restrict playback. Level "1" is the
strictest level. Discs rated higher than the selected
level are restricted.
Available :
You can change the Parental Lock settings later.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
PARENTAL LOCK
COUNTRY CODE
LEVEL
US
TV1
1
TV2
2
TV3
3
NONE
1
2
3
4
5
6
NONE
_ _ _ _
TV4
TV5
TV6
4
TV7
7
TV-/--
10
5
TV8
8
TV0
0
6
TV9
9
PASSWORD
EXIT
Numeric
buttons
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
CH
+
SELECT
ENTER
VOL-
VOL+
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER
5/∞
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
6 Use 5/∞to select a desired parental lock
level, then press ENTER.
SLOW
-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
moves to [PASSWORD].
3D
PHONIC
AMP VOL
RM-SXV008J
REMOTE CONTROL
7 Enter your 4-digit password using the numeric
buttons (0 to 9).
¶While the "OTHERS" page of the preference display is
shown
PARENTAL LOCK
COUNTRY CODE
LEVEL
US
NONE
1234
PASSWORD
EXIT
1 Use 5/∞to move
to select "PARENTAL
LOCK" and press ENTER.
The Parental Lock on-screen display appears on the
TV screen.
...
SELECT
NEW PASSWORD? PRESS 0 ~ 9 KEY
ENTER
points [PASSWORD].
See page 52 for details about how to bring up the
"OTHERS" page.
8 Press ENTER.
The setting is set.
moves to [EXIT].
PARENTAL LOCK
Pressing ENTER again returns to the "OTHERS"
page of the preference display.
COUNTRY CODE
LEVEL
US
NONE
_ _ _ _
PASSWORD
EXIT
• If you enter an undesired password in step 7, reenter the
password before pressing ENTER.
...
SELECT
ENTER
NEW PASSWORD? PRESS 0 ~ 9 KEY
2 Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [COUNTORY CODE] if you enter the
correct password.
If you enter the wrong password, "WRONG!
RETRY..." appears on the TV screen, and you cannot
go to the next step.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
3 To change the "COUNTORY CODE" or
"LEVEL", press ENTER to bring up the
associated pull-down menu while
the appropriate item.
English
To temporarily release the Parental
Lock [PARENTAL LOCK]
points
Available :
To select the item to be set, use 5/∞when no pull-
When you set the parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the Parental Lock to be temporarily released or
not.
down menu is shown.
4 Use 5/∞to select a desired option and press
ENTER.
Note that if you change the country code, you must
reselect the Parental Lock level.
TV
DVD
5 While
points [PASSWORD], enter a 4-digit
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
password using the numeric buttons (0 to 9).
TV4
4
TV5
5
TV6
6
Numeric
buttons
The password entered in the above step becomes
the new password. If you do not change the
TV7
7
TV8
8
TV0
0
TV9
9
TV-/--
10
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
RETURN SUBTITLE
GROUP
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
CH
+
5/∞
VOL
-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
REPEAT SUBTITLE AUDIO
VFP
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
6 Press ENTER.
RM-SXV008J
REMOTE CONTROL
moves to [EXIT].
Pressing ENTER again returns to the "OTHERS"
page of the preference display.
1 Use the 5/∞to move
to [TEMPORARY
NOTES
RELEASE], then press ENTER.
• If you enter the wrong password more than 3 times in
step 2 above,
moves to the [PASSWORD].
moves to [EXIT] automatically and
5/∞does not work.
When selecting [NOT RELEASE], press 0(OPEN/
CLOSE) to remove the disc.
• If you forget your password in step 2
Enter "8888." The current password is deleted and you
can set a new password.
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
_ _ _ _
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE
2 Enter your 4-digit password using the numeric
buttons (0 to 9).
The Parental Lock is released, and the unit starts
playback.
If you enter the wrong password, "WRONG!
RETRY..." appears on the TV screen.
Enter the correct password.
NOTE
• When you enter the wrong password more than 3 times
in step 2 above,
moves to [NOT RELEASE]
automatically and 5/∞do not work.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1 2
3
4
5
6
7
8
DVD/SUPER VCD/VCD/CD PLAYER
7STOP
3PLAY
8PAUSE
SKIP
4
¢
0OPEN/CLOSE
STANDBY
STANDBY/ON
PROGRESSIVE
9
0
-
7 8PAUSE button (15, 18)
8 4/¢SKIP buttons (18, 19)
1 STANDBY/ON
button (12)
2 STANDBY indicator (9, 12)
3 Disc tray (14, 16, 17)
9 Display windows (see the illustration below)
0 Remote sensor (10)
4 0OPEN/CLOSE button (14, 16, 17)
5 7STOP button (15, 16, 39)
6 3PLAY button (15, 17)
- PROGRESSIVE indicator (12, 49)
Display window
1
2
3
4
5
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
GROUP TITLE TRACK CHAP
1
A B
VCDVD
38
PROGRAM
RANDOM
6
7
1 Audio format indicators
2 Disc indicator
5 Repeat mode indicators (27, 41, 46)
6 PROGRAM/RANDOM indicators (25, 26)
7 Multi-information window
3 3(play)/8(pause) indicators
4 Group/title/track/chapter indicators
Rear panel
1
2
3
4
5
6
7
8
9
1
AV COMPU LINK
AC IN
PCM / STREAM
RIGHT
LEFT
VIDEO
COMPONENT
480p
Y
P
B
P
R
REMOTE
480i
S-VIDEO
OPTICAL COAXIAL
DIGITAL OUT
AUDIO OUT
VIDEO OUT
1 DIGITAL OUT jacks (OPTICAL/COAXIAL) (9)
2 AUDIO OUT jacks (6, 7, 8, 9)
6 Scan mode selector (480i/480p/REMOTE) (6, 7, 8)
7 AV COMPU LINK jacks (58)
3 VIDEO OUT - VIDEO jack (6)
8
AC IN connector (9)
4 VIDEO OUT - S-VIDEO jack (6)
9 Region code label (4)
5 VIDEO OUT - COMPONENT jacks (Y/PB/PR) (7)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Remote control unit
$
%
TV
DVD
STANDBY/ON
OPEN/
CLOSE
^
&
TV
DVD
1
2
TV1
1
TV2
2
TV3
3
TV4
TV5
TV6
4
TV7
7
5
6
TV9
9
TV8
8
TV-/--
TV0
MUTING
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN SUBTITLE
*
(
3
4
CH
+
)
_
VOL-
VOL+
5
6
ENTER
+
¡
CH
-
7
8
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
9
0
-
SLOW
-
SLOW+
VFP
£
¢
REPEAT SUBTITLE AUDIO
=
~
!
PROGRESSSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
@
#
RM-SXV008J
REMOTE CONTROL
1 OPEN/CLOSE button (14, 16, 17)
2 Numeric buttons
# ANGLE button (21, 31)
$ Infrared signal-emitting window (10)
3 RETURN button (23)
% TV - DVD switch (11, 12, 22, 39, 42, 47)
4 TOP MENU button (22)
^ TV STANDBY/ON
& DVD STANDBY/ON
button (11)
button (12)
5 Cursor selection (5Up, ∞Down) -
CH (+/–) buttons (11)
* TV/VIDEO - CANCEL button (11, 22, 26)
( TITLE/GROUP button (23, 41, 45)
) MENU button (22)
6 Cursor selection (2Left, 3Right) -
VOL (+/–) buttons (11)
7 CHOICE button (13, 47)
_ ENTER button
8 4/PREVIOUS button (18, 19, 39, 43)
9 7/CLEAR button (15, 16, 26, 39, 46)
0 3/SELECT button (15, 22, 39, 44)
- 1/SLOW– button (18)
+ ON SCREEN button (20, 35)
¡ ¢/NEXT button (18, 19, 39, 43)
8/STROBE button (15, 18, 18, 32, 39)
£ ¡/SLOW+ button (18)
= REPEAT button (27, 41, 46)
~ SUBTITLE button (29)
¢ AUDIO button (30)
VFP - PROGRESSIVE SCAN button (8, 33)
ZOOM +/– buttons (32, 44)
! DIGEST button (24)
@ 3D PHONIC button (34)
AMP VOL +/– buttons (11)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest
operation.If your video/audio player (such as a DVD player, CD player and VCR) and
television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied
with the JVC AV COMPU LINK cable(s), when you simply starting the player, all the
necessary settings of the television and/or amplifier/receiver for enjoying playback are
automatically performed.
To AV COMPU LINK
(II, EX or III)
Connection and setup
Using the AV COMPU LINK cable, connect the AV
COMPU LINK terminals of each component to one
another.
TV
Receiver
To AV COMPU LINK
The unit
• The unit's AV COMPU LINK setting is operated in the
OTHERS page in the preference display. See page 52
for operation.
• For information on the connection between the TV and
the receiver, refer to the receiver's Instructions.
• If you connect the unit to a television and receiver via
AV COMPU LINK, set the unit's AV COMPU LINK
setting to DVD1.
IMPORTANT!
To AV COMPU LINK (II, EX or III)
• When you make video connection between the unit and
another device (such as a receiver and TV) via the
composite, S-video or component jacks, as well as AV
COMPU LINK connection, see also the instruction
manual of the other device.
TV
The unit
Notes for connection
• If you connect the unit to a receiver via AV COMPU LINK
in a system including a Dolby Digital decoder, some
functions may not be performed automatically.
• If you connect the unit to a television via AV COMPU
LINK, set the unit's AV COMPU LINK setting as follows.
• When connecting to VIDEO-1 input terminal of
the television: DVD2
• When connecting to VIDEO-2 input terminal of
the television: DVD3
• Connect the AUDIO OUT jacks of the unit to the audio
input jacks of a receiver that indicating "DVD".
Otherwise, the system will not work correctly.
• There may be no description about connections to the
unit in the instruction manual of a television or VCR.
However a television or VCR with AV COMPU LINK
terminals indicating "II", "EX" or "III" can be connected
to the unit.
To AV COMPU LINK
(II, EX or III)
TV
The unit
To AV COMPU LINK
VCR
Operation
You can enjoy pictures and/or sound by just putting a
source component (which plays back the pictures and/or
sound such as a DVD player or VCR) into play mode. You
do not have to operate the TV and receiver including not
having to perform power switching.
• If you connect the unit to a television and VCR via AV
COMPU LINK, set the VCR's Remote Control Code and
the unit's AV COMPU LINK setting as follows.
1 Turn on the main power of the television.
• When connecting to VIDEO-1 input terminal of
the television:
The unit's AV COMPU LINK setting: DVD2
VCR's Remote Control Code: B
• When connecting to VIDEO-2 input terminal of
the television:
The unit's AV COMPU LINK setting: DVD3
VCR's Remote Control Code: A
2 Insert a disc (or tape) into the source
component.
3 Press 3 of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external
input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component
which has started playback.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
POWER
Symptom
Possible cause
Remedy
Power does not come on.
Power plug is not inserted securely.
Plug in securely.
OPERATION
Symptom
Possible cause
Remedy
The remote control unit does not work.
Too far from the unit.
More closer to the unit.
The tip of the remote control unit is not
pointed in the right direction.
Point the infrared light- emitting window
toward the remote sensor on the front
panel. (See page 10.)
Batteries are exhausted.
Replace the batteries with new ones.
Battery polarity is incorrect.
Take out the batteries and insert them again
in the correct direction.
The remote control unit is not set for
operating your TV.
Set the remote control unit for operating
your TV. (See page 12.)
The TV/VIDEO - CANCEL, 5/∞/2/3or
numeric buttons do not work.
The TV - DVD switch is not correctly set.
To control the unit, set the TV - DVD switch
to "DVD". To control your TV, set the TV -
DVD switch to "TV". (See page 11.)
Operation is not possible.
Microcomputer malfunction due to
lightning or static electricity.
Turn off the power and unplug the power
cord, then connect the power cord again.
Moisture condensation caused by a sudden Turn off the power, then turn it on a few
change of temperature or humidity.
hours later.
The disc does not allow the operation.
Or a non-playable disc is loaded.
Check and replace the disc. (See page 4.)
When using the TITLE/GROUP button to
select a title during DVD VIDEO playback,
appears on the TV screen and the title
cannot be selected.
The disc does not allow the operation
because of disc contents.
Try to press 7and select a title using the
numeric buttons on the remote control
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
PICTURE
Symptom
Possible cause
Remedy
No picture is displayed on the monitor.
Connection of video cable is incorrect.
Connect the cable correctly.
Input selection of TV is incorrect.
Disc is not playable.
Select correctly.
Use a playable disc. (See page 4.)
No picture is displayed on the monitor or
the screen is blurred or divided into two
parts.
The unit is in the progressive scan mode
(i.e. the PROGRESSIVE indicator is lit)
though it is connected to a TV via the
VIDEO or S-VIDEO jack.
Set the Scan mode selector on the rear
panel to "480i", or set it to "REMOTE" and
make the Progressive scan mode inactive
by using the VFP-PROGRESSIVE SCAN
button (see pages 7 and 8).
A picture is noisy or blurred.
The unit is connected to a VCR directly and Connect the unit so that the picture signal
the copyguard function is activated.
flows directly to the TV.
With some discs, a picture may be blurred
when setting "PROGRESSIVE MODE" to
"FILM" or "AUTO".
Set "PROGRESSIVE MODE" to "VIDEO".
(See page 49.)
A picture does not fit the television screen.
MONITOR TYPE is not correctly set.
Television is not correctly set.
Select monitor type correctly. (See page 49.)
Set the television correctly.
The upper and lower parts of the
preference display are cut off when using
wide-aspect TV.
It depends on the setting on the TV.
Adjust the TV screen using the control on
the TV.
AUDIO
Symptom
Possible cause
Connection is incorrect.
Remedy
Check the connection.
Select correctly.
No audio is reproduced.
Input selection of amplifier is incorrect.
No audio is reproduced when playing back The audio signal is not derived from the
Use AUDIO OUT when playing back such
discs.
a DVD disc recorded with High-sampling
(88.2 kHz or more) linear PCM audio using
the DIGITAL OUT jack.
unit's DIGITAL OUT. (See page 50.)
Audio volume is low when playing back the The audio level recorded on a DVD VIDEO Turn up the volume of the TV or amplifier/
unit, compared with the TV or VCR.
is lower, compared with TV broadcasting.
receiver.
Note that you should turn down the volume
before switching back to TV broadcasting,
to prevent outputting the sudden big
sound.
Sound is distorted or noise is generated.
Disc is dirty.
Wipe the disc surface. (See page 5.)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Frequently Asked Questions
Question
Answer
Ref. page
Can I play back DVD VIDEO and Video CD purchased
abroad?
You can play back the DVD VIDEO discs with the Region
Code (local code) containing 'ALL' or '1' recorded in the
NTSC or PAL system (PAL disc signals are reproduced by
converting to the NTSC system). You can also play back
the Video CD discs recorded in the NTSC system. Please
check the information on each disc jacket.
4
Can I play back a DVD VIDEO disc without any Region
Code number?
The Region code indicates the conformity of the disc to
the standards.
Any DVD VIDEO not conforming to the standards cannot
be played back.
4
4
Can I play back a CD-R/RW disc with still pictures in other
than the JPEG format?
No, you cannot play back that disc.
Can I play back audio on a disc labeled "Dolby Digital
EX"?
Yes, you can play back the disc because Dolby Digital EX
is compatible with Dolby Digital. However, to get the
maximum performance of Dolby Digital EX, we
recommend to connect the DIGITAL OUT jack to a
decoder or amplifier/receiver with built-in decoder that
supports Dolby Digital EX. In this case, set "DIGITAL
AUDIO OUTPUT" on the "AUDIO" preference display to
"STREAM/PCM".
50
50
Can I play back audio on a disc labeled "DTS ES"?
Is there any difference in the playback settings between
Discrete and Matrix recording systems for DTS ES?
Though you cannot enjoy audio using the analog audio
outputs (AUDIO OUT), you can enjoy DTS ES audio by
connecting the DIGITAL OUT jack to a decoder or
amplifier/receiver with built-in decoder that supports
DTS ES. In this case, set "DIGITAL AUDIO OUTPUT" on
the "AUDIO" preference display to "STREAM/PCM".
Can this unit play back a disc labeled "THX"?
What does "THX" mean?
Yes you can. "THX" is a name of the original standard for
high quality picture/audio recording and playback
established by Lucasfilm Ltd. A disc labeled "THX" is
certified that it passed this standard.
When files of the MP3 and Audio CD formats are
recorded on a same disc, can the unit play back files of
both formats?
The disc is of the data CD format, therefore, the unit can
play back only files of the MP3 format.
4, 39
Some Dolby Digital discs contain 5.1-ch Surround or
Dolby Surround audio data. What is the difference
between these two types?
Both are surround sound standards developed by Dolby
Laboratories Inc. in the U.S.A.
Dolby Surround records 2-channel surround audio
information are recorded onto the analog stereo (left and
right) channels together with front stereo audio
information. When played back, the surround signals are
separated by a Dolby Surround or Dolby Pro Logic
decoder.
4
Dolby Digital digitally encodes and records up to six
channel information for left, right, center, rear left, rear
right and LFE (Low-Frequency Effect for Sub-woofer etc.).
When played back, a Dolby Digital decoder decodes data
and outputs signals separately.
Generally, Dolby Digital sounds better.
When playing back a DVD VIDEO or Video CD disc,
something like mosaic appears on the TV screen. Is this
because of a malfunction of the unit?
It is a block noise specific to a motion picture recorded in
digital, and is not a malfunction of the unit.
The unit does not function as described in this
Instruction Manual.
The operation of this unit may occasionally be
unacceptable due to the intention of the disc contents
creator and/or structural restrictions.
Can I record DVD VIDEO data on a video tape?
Can this unit record data?
Most of all DVD VIDEO discs are copy-protected so that
you cannot record DVD VIDEO data onto any video tape.
3
No, you cannot.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Specifications
*Specifications and appearance subject to change without prior notice.
General
Readable discs:
Video format:
DVD VIDEO, Audio CD, Video CD, SVCD
NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable
Other
Power requirements:
Power consumption:
Mass:
AC 120 V
, 60 Hz*
14 W (POWER ON), 1.3 W (STANDBY mode)
2.6 kg (5.8 lbs)
Dimensions (W x H x D):
435 mm x 68 mm x 267.5 mm
(17-3/16 inch x 2-7/8 inch x 10-9/16 inch)
Video outputs
COMPONENT (pin jacks):
Y Output:
1.0 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
PB/PR Output:
1.0 Vp-p (75 Ω)
Y Output:
C Output:
500 Lines or more
VIDEO OUT (pin jack):
S-VIDEO OUT (S jack):
1.0 Vp-p (75 Ω)
286 mVp-p (75 Ω)
Horizontal resolution:
Audio outputs
ANALOG OUT (pin jack):
DIGITAL OUT: (COAXIAL):
(OPTICAL):
2.0 Vrms (10 kΩ)
0.5 Vp-p (75 Ω termination)
–21 dBm to –15 dBm (Peak)
Audio characteristics
Frequency response:
CD
(sampling frequency 44.1 kHz):
2 Hz to 20 kHz
2 Hz to 22 kHz
DVD (sampling frequency 48 kHz):
(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)
DVD (sampling frequency 96kHz/88.2 kHz):2 Hz to 44 kHz
16 bit: More than 98 dB
Dynamic range:
20 bit: More than 106 dB
24 bit: More than 106 dB
Wow and flutter:
Total harmonic distortion:
Unmeasurable (less than 0.002%)
less than 0.002%
*Notes for PX model (Check the specification indication on the rear panel.):
Power requirements :AC 110V - 240V
, 50Hz/60Hz
Power consumption :15W (POWER ON), 2.5W (STANDBY mode)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Appendix A: Country code list for Parental Lock
This list is used for the Parental Lock operation. For details, see page 53.
ES Spain
ET Ethiopia
LB Lebanon
LC Saint Lucia
SA Saudi Arabia
AD Andorra
AE United Arab Emirates
AF Afghanistan
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
FI
FJ
Finland
Fiji
LI
Liechtenstein
AG Antigua and Barbuda
LK Sri Lanka
LR Liberia
LS Lesotho
FK Falkland Islands
FM Micronesia
(Federated States of)
FO Faroe Islands
FR France
FX France, Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
AI
Anguilla
AL Albania
AM Armenia
LT
Lithuania
SI
Slovenia
AN Netherlands Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
LU Luxembourg
LV Latvia
LY Libyan Arab
MA Morocco
MC Monaco
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
MP Northern Mariana
Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
SJ Svalbard and Jan
Mayen
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
GE Georgia
GF French Guiana
GH Ghana
AU Australia
AW Aruba
SO Somalia
SR Suriname
ST Sao Tome and Principe
SV El Salvador
SY Syrian Arab Republic
SZ Swaziland
TC Turks and Caicos
Islands
TD Chad
TF French Southern
Territories
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
GI
Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
GS South Georgia and the
South Sandwich
GT Guatemala
GU Guam
BI
Burundi
BJ Benin
TG Togo
TH Thailand
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling) Islands
CF Central African
Republic
CG Congo
CH Switzerland
TJ
Tajikistan
GW Guinea-Bissau
GY Guyana
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
TT Trinidad and Tobago
TV Tuvalu
TW Taiwan
HK Hong Kong
HM Heard Island and
McDonald Islands
HN Honduras
HR Croatia
MX Mexico
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
HT Haiti
HU Hungary
NF Norfolk Island
NG Nigeria
ID
IE
IL
Indonesia
Ireland
Israel
TZ Tanzania, United
Republic of
UA Ukraine
NI
Nicaragua
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
PL Poland
PM Saint Pierre and
Miquelon
PN Pitcairn
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
IN
IO
India
UG Uganda
British Indian Ocean
Territory
UM United States Minor
Outlying Islands
US United States
UY Uruguay
UZ Uzbekistan
VA Vatican City State
(Holy See)
VC Saint Vincent and the
Grenadines
VE Venezuela
CI
Cô te d'Ivoire
IQ
IR
Iraq
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
Iran (Islamic Republic
of)
Iceland
Italy
IS
IT
JM Jamaica
JO Jordan
JP Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
VN Vietnam
VU Vanuatu
WF Wallis and Futuna
Islands
WS Samoa
YE Yemen
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
KI
Kiribati
KM Comoros
KN Saint Kitts and Nevis
KP Korea, Democratic
People's Republic of
KR Korea, Republic of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
LA Lao People's
Democratic Republic
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
ZW Zimbabwe
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix B: Glossary
480i/480p
DTS
A Digital Surround audio encoding format configured
Indicates the number of scan lines and scanning
format of an image signal. 480i indicates 480 scanning
lines with interlace format, and 480p indicates 480
scanning lines with progressive format.
with six (5.1) channels, similar to Dolby Digital. It
requires a decoder, either in the player or in an
external receiver. DTS stands for Digital Theater
Systems.
Aspect ratio
Not all DTS discs contain six (5.1) channel
information.
A ratio which defines the shape of the rectangular
picture in a TV. It is the width of the picture relative to
the height. The conventional TV picture is 4:3 in
aspect ratio.
Dynamic range
The difference between the loudest and softest
sounds.
Bitstream
The digital form of multichannel audio data (e.g., 5.1-
channel) before it is decoded into its various channels.
Dynamic range compression
The dynamic range compression (DRC) reduces the
dynamic range so that you can turn down the volume
to avoid disturbing others yet still hear the detail of
quiet passages.
Channel, CH
Stereo or multichannel audio consists of "channel"
signals. "Stereo" audio consists of left and right
channels, while 5.1-channel Dolby Digital consists of
six channels (front left, front right, rear left, rear right,
center and LFE (Low-Frequency Effect channel for sub-
woofer, etc.).
Extension
Several letters at the end of a filename. Filename
extensions usually follow a period and indicate the
type of information stored in the file.
Chapter
Finalize
The smallest division on DVD VIDEO. It is a division of
a title and similar to a track for Audio CD or Video CD.
When conducting multisession recording, this means
the closing of a session (fixing) by indicating the
halting of writing so as to prevent the addition of any
more sessions.
Component video
Video signals with three channels of separate
information that makes up the picture. There are
some types of component video, such as R/G/B and Y/
CB(PB)/CR(PR).
Fs
See "Sampling frequency".
ID3 tag
Composite video
The tag embedded in an MP3 file indicating what
song, artists, and album it comes from. You can edit
these tags.
A single video signal commonly used in most
consumer video products that contains all luminance,
color, and synchronization information.
Interlace scan
Dolby Digital (AC3)
In the conventional video system, a picture is shown
on the display monitor in two halves. The Interlace
scan system places lines of the second half of the
picture in-between lines of the first half of the picture.
A six-channel system consisting of left, center, right,
left rear, right rear and LFE (Low-Frequency Effect
channel for sub-woofer, etc.) channels. All processing
is done in the digital domain.
Not all Dolby Digital discs contain six (5.1) channel
information.
ISO 9660 Format
The most common international standard for the
logical format for files and directories on a CD-ROM.
Dolby Surround/Dolby Prologic
Dolby Surround is a five-channel system consisting of
left, center, right and left rear, right rear channels. All
processing is done in the digital domain.
Dolby Prologic is a four-channel system consisting of
left, center, right and rear channel (the single rear
channel is usually played through two speakers).
JPEG
A popular file format for still image compression.
JPEG stands for Joint Photographic Experts Group.
There are three sub-types of the JPEG format as
follows.
• baseline JPEG:
used for digital cameras, web,
etc.
Downmix
• progressive JPEG: used for web
• lossless JPEG: an old type and rarely used
now
Internal stereo mix of multichannel surround audio by
a DVD player. The downmix signals are output from
stereo output connectors.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Letter box
A type of picture playback with the normal (4:3) TV
Progressive scan
English
Progressive scan displays all the horizontal lines of a
picture at one time, as a single frame. A progressive-
scan DVD player converts the interlaced (480i) video
from DVD into progressive (480p) format for
connection to a progressive display. It dramatically
increases the vertical resolution.
screen. Black bars are shown at the top and bottom of
the image to allow playing of wide-screen (16:9) DVD
movie without cutting off any sides of the image on a
4:3 TV.
Linear PCM audio
Stands for "pulse code modulation". Linear PCM is the
usual digital method without compression, used for
audio playback of DVD Video discs, Audio CD discs,
etc.
Region code
Code identifying a geographic region of compatibility
for a DVD.
Sampling frequency
Menu
The rate at which measurements of an audio signal
are taken during A/D and D/A conversion. The
measure is samples per second.
Most DVD VIDEO or Video CD/SVCD discs provide a
menu, through which users can select a desired
playback material, condition, etc.
Surround
MP3
An audio system with more than two (left and right)
channels, usually including rear channels, etc.
MP3 is an audio data reduction format, which stands
for MPEG-1 Audio Layer 3. Using MP3, you can
achieve a data reduction of about 1:10.
S-video
A video signal which improves picture quality over
standard composite connections. Used on Super VHS,
DVD, high end TV monitors, etc.
MPEG
A family of Standards for compressing audio-visual
information. "MPEG" standards include MPEG-1,
MPEG-2 and MPEG-4. Video CD and MP3 are based on
MPEG-1, while DVD is based on MPEG-2. MPEG
stands for Moving Picture coding Experts Group.
Title
The largest division on DVD VIDEO.
Track
Multisession
The smallest division on Audio CD, Video CD and
SVCD discs.
A method of adding data to a CD-R/CD-RW in more
than one recording session using the Track-At-Once
method.
Transfer rate
The rate of transferring digital data. Usually the
measure is in baud per second. The DVD system
applies variable transfer rate system for high
efficiency.
NTSC (National television system committee)
A black & white and color television system format
used in U.S.A., Canada, Mexico and Japan.
Packet Writing
A method of writing data on a CD-R/CD-RW in small
increments. Packets can be of fixed or variable length.
PAL (Phase Alternation by Line)
A color television system format used extensively in
Western Europe.
Pan scan
A type of picture playback with the normal (4:3) TV
screen, which is panned and zoomed across the wider
movie picture, chopping off the left and right sides.
Parental lock
A DVD function that prevents undesired viewing by
children depending on disc contents. You need a
password to play back a locked disc in the normal
condition. Otherwise, undesirable scenes are
automatically skipped or replaced with other pictures.
PBC
PBC stands for "Playback control" and is a method of
controlling disc play for Video CDs (VCD). You are able
to interact with the disc through menus.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix C: Index
Numerics
3D PHONIC ...................................................................... 34, 51
480i ............................................................................ 6, 7, 60, 62
480p .................................................................................... 7, 62
Menu bar ........ 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 35, 36, 37
Menu language ..................................................................... 48
Monitor type .............................................................. 13, 49, 60
MP3 ............................................................ 4, 39, 40, 41, 42, 50
MP3 CONTROL .......................................................... 40, 41, 48
MP3 disc ................................................................. 3, 17, 39, 47
MPEG ......................................................................... 13, 39, 50
Multi-angle part .............................................................. 31, 37
Multiple session .............................................................. 39, 42
A
A-B repeat .................................................................. 28, 36, 37
Angle ............................................................... 15, 17, 29, 31, 37
Audio language ..............................................15, 29, 30, 36, 48
Auto standby ......................................................................... 52
AV COMPU LINK .................................................. 7, 8, 9, 52, 58
AV COMPULINK mode ......................................................... 52
N
NTSC ............................................................................... 4, 7, 62
O
C
One touch replay function .................................................... 21
On-screen guide .............................................................. 15, 52
On-screen language ....................................................... 13, 48
Opening display .........................................................12, 13, 14
Chapter ..................................... 5, 19, 20, 21, 24, 25, 27, 28, 36
Chapter search ...................................................................... 36
Component video .................................................... 2, 7, 58, 62
Copyguard system .................................................................. 3
Copy-protected disc................................................................ 6
Country code ............................................................. 53, 55, 63
P
Packet write ..................................................................... 39, 42
PAL ........................................................................................... 4
Pan scan ................................................................................ 49
Parental lock .................................................. 52, 53, 54, 55, 63
Playback control (PBC) .............5, 17, 19, 20, 22, 23, 24, 27, 28
Preference ........................7, 8, 9, 13, 15, 16, 17, 29, 30, 31, 33,
39, 42, 47, 48, 53, 54, 55, 58, 60
D
D. range compression ...................................................... 9, 51
Digest ............................................................................... 24, 25
Digital audio output .................................................4, 9, 13, 50
Direct selection ..................................................................... 41
Disc resume .......................................................... 15, 16, 17, 52
Dolby .................................................................................. 3, 58
Dolby Digital .....................................4, 9, 13, 34, 50, 51, 58, 62
Down mix ....................................................................... 7, 8, 51
DTS .................................................................3, 4, 9, 13, 50, 62
DVD menu ............................................................................. 22
DVD PLAYER SET UP .............................................................13
Program (playback) ....................................... 24, 25, 26, 28, 37
Progressive mode .................................................... 7, 8, 49, 60
Progressive scan .......................................... 7, 8, 33, 49, 60, 62
R
Random (playback) ....................................................26, 27, 38
Region code .................................................................4, 12, 14
Repeat (playback) ......................................27, 28, 36, 37, 41, 46
Resume (playback) ............................................... 15, 16, 17, 52
E
Extension ......................................................................... 39, 42
S
F
Sampling rate .......................................................................... 4
Scan mode ........................................................... 6, 7, 8, 49, 60
Screen saver .............................................................. 15, 42, 50
Slide show ....................................................................... 44, 45
Slide show mode ............................................................ 44, 46
Slide show playback ....................................................... 44, 45
Slow-motion ...............................................................15, 18, 21
Status bar .............................. 20, 21, 26, 29, 30, 31, 35, 36, 37
Strobe (playback) .................................................................. 32
Subtitle language ...................................................... 15, 29, 36
S-video ................................................................ 6, 7, 58, 60, 62
Finalize ......................................................................... 4, 39, 42
G
Group ................................................ 39, 40, 41, 42, 43, 45, 46
I
ID3 tag .................................................................................... 39
Initial setting .....................................................................13, 47
Initial setup .............................................................................13
Interlace scan ....................................................................... 7, 8
ISO 9660 .......................................................................... 39, 42
J
T
JPEG .................................................... 4, 39, 42, 43, 46, 48, 50
JPEG CONTROL .................................................. 43, 44, 45, 46
JPEG disc .................................................... 3, 17, 42, 43, 44, 47
Time search ......................................................... 23, 24, 36, 37
Transfer rate .................................................................... 20, 39
Transport status .............................................................. 20, 21
L
V
Language code ...................................................................... 48
Linear PCM .................................................................. 4, 50, 60
VFP (Video fine prosessor) ......................................... 8, 33, 60
Z
M
Zoom (playback) ....................................................... 32, 44, 49
Macrovision ............................................................................. 3
Manufacturer code ................................................................11
Menu ........................................ 5, 13, 14, 15, 20, 22, 23, 36, 37,
47, 48, 49, 50, 51, 52, 53, 54, 55
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR J VC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
1 YR
90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0102KTYDTEJSC
EN.
Download from Www.Somanuals.com. All Manuals Search And Download.
|