DVD PLAYER
Before operation
15
2
XV-N410B/XV-N412S
Preparations
4
Basic playback
8
Various kinds of playback
MP3/WMA disc playback
JPEG disc playback
11
20
22
V I D E O
Region code of DVD VIDEO
This player can play back DVD VIDEO discs whose region code
numbers include “1.”
Changing the initial settings 24
Examples of playable DVD VIDEO discs:
1 2
3 4
1 2 3
4 5 6
ALL
1 5
1
Additional information
29
The player’s region code is printed on the rear of the player.
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this information
for future reference.
Model No.
Serial No
GNT0044-001A
[J/UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Table of contents
Check that you have all the following accessories supplied to you.
If anything is missing, consult your dealer immediately.
Supplied accessories................................................................1
About this manual .....................................................................1
Precautions................................................................................1
• Audio/video cable (Yellow/White/Red) (× 1)
• Remote control unit (× 1)
• R6P(SUM-3)/AA(15F) battery (× 2)
• AC power plug adaptor (× 1) (for PX model ONLY)
Before operation................................................... 2
About discs..............................................................................2
Names of parts and controls....................................................3
About this manual
Preparations ......................................................... 4
• The display window information and OSD (On Screen Display)
menu items are put in brackets [ ] in the operation procedures.
• Usable disc(s) for each operation/function is (are) referred to by
the icons;
Connections.............................................................................4
Using the remote control unit...................................................7
Basic playback ..................................................... 8
Turning the player on and off...................................................8
Initial setup ..............................................................................8
Starting playback.....................................................................9
Restarting playback after stopping (resuming playback).......10
Precautions
Notes on the power cord
• When you are away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet. A small
amount of power (2.0 W) is always consumed while the power
cord is connected to the wall outlet.
• When unplugging the unit from the wall outlet, always pull the
plug, not the power cord.
Various kinds of playback................................. 11
Playback at various speeds...................................................11
Locating the beginning of a scene or song............................12
Playing from a specific position .............................................12
Changing the playback order.................................................13
Repeat playback....................................................................15
Changing the language, sound and scene angle ..................15
Special picture and sound effects..........................................16
Menu bar functions................................................................18
• Do not handle the power cord with wet hands!
Avoid moisture, water and dust
• Do not place the unit in moist or dusty places.
• If water gets inside the unit, turn off the power and remove the
plug from the wall outlet, then consult your dealer. Using the
unit in this state may cause a fire or electrical shock.
MP3/WMA disc playback ................................... 20
Avoid high temperatures
• Do not expose the unit to direct sunlight or place it near a
Operations.............................................................................20
heating device.
Notes on installation
JPEG disc playback ........................................... 22
• Select a place which is level, dry and neither too hot nor too
cold between 5°C and 35°C (41°F and 95°F).
• Leave sufficient distance between the player and the TV.
• Do not install the player in a place subject to vibrations.
• Do not put heavy objects on the player.
About JPEG discs..................................................................22
Basic operations....................................................................22
Viewing pictures continuously (slide show mode) .................23
To prevent malfunction of the unit
Changing the initial settings ............................. 24
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects, such as wires, hairpins,
coins, etc. into the player.
Selecting preferences............................................................24
Limiting playback by children.................................................27
• Do not block the vents. Blocking the vents may damage the
player.
Additional information....................................... 29
AV COMPU LINK remote control system ..............................29
Troubleshooting.....................................................................30
Specifications ........................................................................31
Appendix A: Country/Area code list for Parental Lock...........32
Appendix B: Table of languages and their abbreviations ......32
Appendix C: Digital output signal chart..................................33
Appendix D: Glossary............................................................34
To clean the cabinet
• Use a soft cloth. Follow the relevant instructions on the use of
chemically-coated cloths.
• Do not use benzene, thinner or other organic solvents and
disinfectants. These may cause deformation or discoloring.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital audio formats
The player supports the following digital audio formats (see page
34 “Glossary” for descriptions of each audio format):
Before operation
Linear PCM, Dolby Digital, DTS (Digital Theater Systems)
NOTE
Depending on the player’s [DIGITAL AUDIO OUTPUT] setting,
digital audio signals may not be output as they are recorded on
the disc. See “DIGITAL AUDIO OUTPUT” on page 26 for details.
Notes on discs
• With some DVD VIDEO discs, the player starts playback
automatically after inserting the disc.
• The image may be sometimes poor or noisy due to defects in
the disc itself.
• With some discs, operations described in this manual may not
be possible.
About discs
Playable disc types
Discs with the following marks can be played back on the player.
DVD VIDEO
SVCD
Video CD
Audio CD
Care and handling of discs
V I D E O
If a disc gets dirty, dusty, scratched or warped, playback sound
and picture may be deteriorated. Take proper precautions when
handling discs.
The DVD Logo is a trademark.
The player can also play back the following discs:
• DVD-R and DVD-RW discs written in the DVD VIDEO format
and finalized
• CD-R and CD-RW discs written in the SVCD, Video CD or
Audio CD format and finalized
Handling
• Do not touch the surface of the disc.
• Do not damage, stick paper to, or use any adhesive on either
the label side or playback side.
• CD-R and CD-RW discs written in MP3 or WMA in accordance
with the “ISO 9660” format (See page 20 for details.)
• CD-R and CD-RW discs written in JPEG in accordance with the
“ISO 9660” format (See page 22 for details.)
Storing discs
• Keep discs in their cases. If discs are piled on top of one
another without their protective cases, they can be damaged.
• Do not put discs in a location where they may be exposed to
direct sunlight, or where the humidity or temperature is high.
Avoid leaving discs in a car!
NOTE
If a disc gets dirty, scratched or warped, or due to the disc
characteristics or recording conditions, it may take considerable
time for the unit to read the content, or the unit may not be able to
play back such discs.
Cleaning discs
• Wipe with a soft dry cloth, moving from the center outwards. If a
disc is difficult to clean, wipe with a cloth moistened with water.
The player can play back audio signals recorded in MIX-MODE
CD, CD-G, CD-EXTRA and CD TEXT.
Color system format
This player accommodates the NTSC system, and also can play
back discs recorded with PAL system whose Region Code
numbers include “1.”
Note that the PAL video signal on a disc is converted to an NTSC
signal and output.
• Never use record cleaners, petrol, alcohol or any anti-static
agents.
Notes on copyright
Unplayable discs
The player does not play back discs listed below. If you try to play
back these discs, noise may generate causing damage to
speakers.
Check the copyright laws in your country before recording from
DVD VIDEO, SVCD, Video CD, Audio CD, MP3, WMA and JPEG
discs.
Recording of copyrighted material may infringe copyright laws.
• DVD-RW discs written in the VR format
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM, PHOTO CD,
SACD
In addition, the player does not play:
• Unfinalized discs.
• Discs of irregular shape or discs with tape, seals or paste on
either the label side or playback side. Playing back these discs
may damage the player.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control unit
Names of parts and controls
$
%
Front panel
1
2
3
456789
1
STANDBY/ON
OPEN
/CLOSE DISPLAY
2
1
4
7
2
5
8
0
3
6
0
-
3
9
1
STANDBY/ON button (8)
2 STANDBY/ON indicator (8)
3 Disc tray (9)
10
+10
RETURN
TITLE/GROUP CANCEL
^
4
5
&
*
(
4 0button (9)
5 4button (11, 12, 22)
6 ¢button (11, 12, 22)
7 7button (9,10)
6
ENTER
7
8
9
)
8 3button (9,10,11)
9 8button (9, 11)
PREVIOUS
CLEAR
NEXT
_
+
¡
0 Display window (see the illustration below)
- Remote sensor (7)
SELECT
0
-
=
SLOW
-
SLOW+
VFP
3D PHONIC REPEAT
Display window
~
!
@
£
¢
PROGRESSIVE
SCAN
ZOOM
ANGLE SUB TITLE AUDIO
1 2
3
4
DIMMER
#
5
6
7
8
1 DISPLAY button (9)
2 OPEN/CLOSE button (9)
3 Numeric buttons
4 RETURN button (12)
5 TOP MENU button (12)
6 Cursor selection (5Up, ∞Down) buttons
7 Cursor selection (2Left, 3Right) buttons
8 SET UP button (9, 24)
9 4/PREVIOUS button (11, 12, 22, 23)
0 7/CLEAR button (9, 14, 15, 21, 22, 23)
- 3/SELECT button (9, 10, 11, 14, 21, 23)
= 1/SLOW– button (11)
1 Progressive mode indicators
[P] turns on in the progressive scanning mode.
[DDP] turns on depending on the [PICTURE SOURCE]
preference setting and the source type of the current DVD
VIDEO disc (see page 5 for details).
2 Dolby Digital/DTS indicators
[Dolby D] turns on when playing back a Dolby Digital sound
source. [DTS] turns on when playing back a DTS-encoded
digital sound source.
3 Resume indicator
Turns on when playback is interrupted with the resume
function activated.
4 Group/title/track/chapter indicators
Show what is indicated by the multi-information display during
playback.
~
button (11)
! 3D PHONIC button (17)
@ ANGLE button (16)
# SUBTITLE button (15)
$ Infrared signal window (7)
5 Repeat mode indicator
Turn on in the repeat playback mode and shows the currently
selected repeat mode.
6 Program/random indicators
Turn on in the program playback mode/random playback
mode respectively.
7 3(play)/8(pause) indicators
Turn on in the playback mode/pause mode respectively.
8 Multi-information window
% STANDBY/ON
button (8)
^ CANCEL button (14)
& TITLE/GROUP button (13, 21, 23)
* MENU button (12, 22, 23)
( ENTER button
) ON SCREEN button (9, 13, 14, 15, 18, 21, 23)
_ ¢/NEXT button (11, 12, 22, 23)
+ 8button (9, 11, 20, 23)
Indicates various kinds of information by numbers and
alphabets, such as the player’s current status (“READ,”
“OPEN,” etc.) or currently played DVD’s title and chapter
number.
¡ ¡/SLOW+ button (11)
REPEAT button (15, 21, 23)
£ VFP - PROGRESSIVE SCAN button (5, 17)
¢ AUDIO button (16)
ZOOM button (16, 23)
DIMMER button
Press to change the brightness of the display window.
You can select the display window brightness from three levels
or off. If the brightness is set to off, nothing will be shown on
the display.
By pressing this button, the brightness of the blue illumination
around the disc tray also changes.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before making connections
• Do not connect the AC power cord until all other
connections have been made.
Preparations
• Connect VIDEO OUT of the player directly to the video
input of your TV. Connecting VIDEO OUT of the player to a
TV via a VCR may cause a monitor problem when playing
back a copy-protected disc. You may also have a monitor
problem when connecting the player to an integrated TV/
Video system.
NOTE
If your TV has an AV COMPU LINK terminal, you can use the AV
COMPU LINK function. See “AV COMPU LINK remote control
system” on page 29 for details.
• In the following description, “TV” may be substituted with
“monitor” or “projector.”
• Terminal names used for other components may be different
from those used in the following description.
Connections
Before using the player, connect the player to a TV and/or
amplifier.
Connecting to a TV
The following sections A to C describe TV connections where
only a TV is connected to the player so that you will hear audio
from the TV.
NOTES
• Do not connect an S-video cable to the S-VIDEO output of the
player. If you do so, you will not be able to obtain correct signals
from the VIDEO jack of the player.
• If your TV has a monaural audio input instead of stereo, you
need to use an optional audio cable which converts stereo
audio output to monaural.
A Connecting to a conventional TV
Yellow
The player
TV
IN
White
VIDEO
Red
T
LEF
IO
D
AU
RIGHT
REMOTE
480p
480i
E
OT
M
E
Audio/video
cable (supplied)
R
0p
i
8
8
4
K
4
IN
L
NENT
0
PU
M
CO
PO
PB
M
PR
CO
V
O
A
DE
I
V
Y
T
F
E
L
L
Yellow
T
IA
AX
OU
O
O
C
DE
I
V
Set the 480i/480p/REMOTE selector to “480i.”
O
E
ID
-V
/
S
M
PC
REA
M
O
IG
R
T
S
T
U
O
O
I
L
D
AU
CA
I
L
PT
A
DIGIT
OUT
Red
White
B Connecting to a TV with an S-video jack
NOTE
If your TV has an S-VIDEO input, you can get better picture
quality by connecting it with the S-VIDEO output of the player
using an S-video cable instead of connecting the video input of
the TV to the VIDEO jack of the player.
To obtain correct signals from the S-VIDEO output, do not
connect cables to the VIDEO jack and COMPONENT VIDEO
OUT jacks of the player.
TV
IN
White
The player
VIDEO
S-
Red
VIDEO
T
LEF
IO
D
AU
RIGHT
REMOTE
480p
480i
E
T
O
M
E
R
p
i
S-video cable
(not supplied)
0
8
K
IN
4
NT
T
NE
0
8
4
PU
L
PO
PB
M
M
PR
CO
CO
V
O
A
DE
I
V
Y
T
F
E
L
IAL
AX
OU
O
O
C
DE
VI
Set the 480i/480p/REMOTE selector to “480i.”
O
E
ID
V
/
S
M
C
T
P
M
A
IG
R
T
RE
ST
U
O
O
I
L
A
D
IC
T
OP
AU
AL
IGIT
D
Audio cable
White
OUT
(not supplied)
Red
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hint
C Connecting to a TV with component jacks
Depending on the source material format, DVD VIDEO discs can
be classified into two types; film source and video source (note
that some DVD VIDEO discs contain both film source and video
source). Film sources are recorded as 24-frame-per-second
information, while (NTSC) video sources are recorded as 30-
frame-per-second (60-field-per-second interlaced) information.
When the player plays back a film source material, Progressive
(uninterlaced) signals are created using the original information.
When a video source material is played back, the unit interleaves
lines between the interlaced lines on each to create the
You can enjoy picture of high-fidelity color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the player to
your TV.
NOTES
• Connect “Y” to “Y,” “PB” to “PB” (CB), “PR” to “PR” (CR) correctly.
• When using the COMPONENT VIDEO OUT jacks, do not
connect the S-VIDEO output jack on the player.
• If your TV has component video input jacks of BNC type, use an
adapter which converts a pin jack to a BNC jack (not supplied).
interpolated picture and outputs as the progressive signal.
Progressive scan video playback available
In the Progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.
Selecting the 480i/480p/REMOTE selector position
• If your TV equipped with
REMOTE
TV
component jacks does not
support the progressive
scanning mode:
480p
480i
PR
Red
IN
PB
Y
Blue
T
IN
EN
Set the 480i/480p/REMOTE
selector to “480i.”
S-VIDEO
The player
COMPON
VIDEO
White
LEFT
• If your TV equipped with
component jacks supports
the progressive scanning
mode:
IO
D
AU
REMOTE
REMOTE
480p
480i
RIGHT
Green
Set the 480i/480p/REMOTE
selector to “480p.”
Red
Component
video cable
(not supplied)
E
T
O
M
E
R
p
i
0
8
4
Red
0
8
4
PR
COMPU LINK
COMPONENT
PB
O
AV
E
ID
V
• If you want to select the
scanning mode between the
interlace and progressive
modes (depending on the
source condition, or when
connecting more than one TV,
etc.):
Audio cable
(not supplied)
Y
Blue
T
F
E
L
L
IA
X
480p
480i
A
O
C
VIDEO OU
O
E
ID
-V
/
E
S
M
PC
S
M
O
A
IG
R
TR
L
IO OUT
D
AU
A
IC
T
L
P
A
White
DIGIT
OUT
Green
Set the 480i/480p/REMOTE
selector to “REMOTE.”
Red
Thus you can select the mode
from the remote control unit.
Activating the Progressive scanning mode using the remote
control unit
When the player is turned on and the 480i/480p/REMOTE
selector is set to “REMOTE,” press and hold down VFP -
PROGRESSIVE SCAN for a few seconds.
The scanning mode switches between the Progressive scanning
and Interlaced scanning modes.
When the scanning mode is set to the Progressive mode, the [P]
indicator lights up in the display window.
[DD] also turns on when Progressive scanned signals on a DVD
VIDEO disc are directly output as they are from the player.
Depending on the [PICTURE SOURCE] preference display and
whether the current DVD VIDEO disc is film-source or video-
source, the indicator that lights up in the display window differs,
as shown in the table below.
NOTES
• The Progressive scanning mode works only when you connect
the player’s COMPONENT VIDEO OUT jacks to your TV.
• There are some progressive TV and High-Definition TV sets
that are not fully compatible with the player, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.
• All JVC progressive TV and High-Definition TV sets are fully
compatible with the player (Example: AV-61S902).
Setting of [PICTURE
SOURCE]
Source type of DVD VIDEO
Film source
[DDP]
Video source
AUTO
FILM
[P]
[DDP]
[DDP]
[P]
VIDEO (NORMAL)/
(ACTIVE)
[P]
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to optional audio equipment
Connecting to a stereo audio amplifier/receiver
Connect the player’s AUDIO OUT (LEFT/RIGHT) jacks to any
line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
Amplifier or receiver
IN
LEFT
White
IO
D
AU
RIGHT
Red
E
T
O
M
E
R
p
0
8
4
NT
T
INK
L
i
0
8
4
PU
PONE
PB
M
M
PR
O
C
CO
V
O
A
E
D
I
The player
V
Audio cable (not supplied)
Y
T
F
E
L
L
A
I
X
A
O
O
OU
C
E
ID
V
O
E
D
I
-V
/
E
S
M
R
C
T
White
P
S
M
O
A
IG
R
T
L
IO OU
D
A
IC
T
AU
P
AL
IGIT
D
T
OU
Red
Connecting to a digital audio device
NOTES
You can enjoy sound of enhanced quality by connecting the
player’s DIGITAL OUT (either OPTICAL or COAXIAL) jack to a
digital input of an amplifier, etc., using an optical or coaxial digital
cable. The digital audio signal on a disc will be transferred directly
from the player. If the connected digital audio equipment is a
Dolby Digital or DTS decoder or an amplifier with a built-in
decoder, you can enjoy high-quality surround sound.
• Connect the player and the digital audio device by using either
an optical digital cable or a coaxial digital cable.
• It is not recommended to use the digital jacks for dubbing.
When recording the sounds (DVD VIDEO, SVCD, Video CD or
Audio CD) played back on the player, record them through the
analog jacks.
• Depending on the disc, no signal may be output from the
DIGITAL OUT. Make an analog connection in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference
display correctly according to the connected digital audio
equipment. If setting made for [DIGITAL AUDIO OUTPUT] is
incorrect, loud noise may be generated causing damage to
the speakers (see page 26).
Digital equipment
IN
OPTICAL
IN
AL
IT
DIG
IAL
AX
T
CO
LEF
D
DV
RIGHT
E
T
Coaxial digital cable (not supplied)
O
M
E
R
0p
8
4
i
LINK
PU
0
8
4
PR
COMPONENT
B
V
COM
O
A
E
D
I
The player
V
Y
T
F
E
L
L
T
A
I
X
A
O
O
OU
C
E
ID
V
Audio cable (not supplied)
O
E
D
I
-V
/
E
S
M
R
C
T
P
S
M
O
A
IG
R
T
U
O
IO
D
U
C
I
T
A
P
AL
IGIT
D
T
OU
Optical digital cable (not supplied)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the power cord
When all the audio/video connections have been made, connect
the AC power plug to the wall outlet. Make sure that the plugs are
inserted firmly.
Remote sensor
Point the top of the remote control unit toward the remote sensor
as directly as possible. If you operate it from a diagonal position,
the operating range (approx. 5 m) may be shorter.
The STANDBY/ON indicator lights in red.
Remote sensor
NOTE
(only for PX model)
Use the supplied AC power plug adaptor when inserting the
larger plug to the wall outlet.
Warning
• Disconnect the power cord:
- if you are not going to use the player for a long time.
- before cleaning the player.
- before moving the player.
• Do not:
- connect or disconnect the power cord with wet hands.
- pull the power cord when disconnecting it, as this may
damage the cord and cause fire, electric shock, or other
accidents.
Caution
• Do not alter, twist or pull the power cord, or put anything heavy
on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power
cord replaced with a new one.
Using the remote control unit
To install batteries
Open the compartment cover, and place the two supplied R6P
(SUM-3)/AA(15F) batteries in the remote control unit according to
the polarity markings (“+” and “–”) inside the compartment. Then
replace the cover.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic, replace
the batteries.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of batteries. If
they are used improperly their lives will be shortened, they may
burst or their contents may leak.
• Remove the batteries from the remote control unit if it is not
going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix
them with other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types,
when replacing them.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• REGION CODE ERROR! (The region code of the DVD VIDEO
disc does not match the player. The disc cannot be played
back.)
• OPEN (The disc tray is opening.)
• CLOSE (The disc tray is closing.)
• NO DISC (No disc is loaded.)
Basic playback
NOTE
Even if you turn off the player, the player is not disconnected from
the AC power source as long as it is connected to the wall outlet.
This state is called standby mode. In this state, the player
consumes a very small amount of power.
Initial setup
When you turn on the player for the first time after purchase, the
following message appears on the TV screen.
STANDBY/ON indicator
0
738
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - PRESS CANCEL
STANDBY/ON
DISPLAY
You can set the display language, TV monitor type and digital
output before using the player, by following the procedure below.
OPEN/CLOSE
STANDBY/ON
1 Press ENTER.
The first page of the DVD PLAYER SET UP display appears.
The pull-down menu of the [ON SCREEN LANGUAGE] is
already open.
ENTER
SET UP
7
5/∞/2/3
ON SCREEN
3(SELECT)
DVD PLAYER SET UP
8
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
ON SCREEN LANGUAGE options
About invalid operation icon
When you press a button, and if the player does not accept its
operation, appears on your TV screen. Operations are
occasionally unacceptable even if is not displayed.
Note that some operations may not be accepted. For example,
some discs may not allow rapid advance/reverse or slow-
motion playback.
2 Press 5/∞to select the desired language.
You can select the on-screen language for the preference
displays, etc. from among ENGLISH, SPANISH and
FRENCH.
3 Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
DVD PLAYER SET UP
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
MP3&WMA/JPEG
4:3 L.B.
Turning the player on and off
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
MP3&WMA
Press STANDBY/ON
on the remote control
unit or press
panel.
STANDBY/ON on the front
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
The STANDBY/ON indicator on the front panel, which lights
in red during standby, lights in green.
The blue illumination around the disc tray turns on.
MONITOR TYPE options
4 Press 5/∞to select the desired monitor type.
The opening display appears on the TV screen, and the following
messages may appear at the bottom of the opening display.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO].
(See page 25.)
NOW READING
Message area
• NOW READING (The player is reading the disc information.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press ENTER.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu
may be shown on the TV screen. From the menu, you can select
a desired item to be played back.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
DVD PLAYER SET UP
For DVD VIDEO
1 Press 5/∞/2/3to select a desired item.
2 Press ENTER.
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D RANGE CONTROL
OUTPUT LEVEL
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
STANDARD
The player starts playback of the selected item.
For SVCD/Video CD
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
DIGITAL AUDIO OUTPUT options
NOTES
6 Press 5/∞to select a desired digital output
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the player.
signal type.
Set this item correctly when you connect the player to an
external surround decoder or D/A converter. (If you do not
connect the player to such a device, you do not have to set
this item.)
• When connecting to other digital device, select [PCM
ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder or a DTS
decoder, select [STREAM/PCM].
To check the playback status
You can see the current selection number (the title/chapter
number for DVD VIDEO or track number for SVCD/Video CD/
Audio CD), time information (the track or chapter time while
stopped, or elapsed track or chapter time during playback) and
the transport status (stop, playback, pause, etc.) on the TV
screen.
7 Press ENTER.
The TV screen returns to the opening display.
Press ON SCREEN.
Example: for DVD VIDEO
To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER SET UP
display appears.
Current transport
status
Current chapter
number
Transfer rate
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
Current title number
Starting playback
Disc elapsed
time
Note that pressing ON SCREEN again brings up the menu bar
under the status bar, from which you can access various
functions. See page 18 for details about the menu bar.
1 Press 0(or OPEN/CLOSE on the remote
To turn off the status bar
Press ON SCREEN repeatedly until the status bar goes off.
control unit) to open the disc tray.
2 Place a disc in the disc tray.
To change the display window contents
With the label side up
Press DISPLAY.
Example: for DVD VIDEO
Each time you press DISPLAY, the elapsed time display and
the title/chapter number display appear alternately.
Title number
Elapsed time
Chapter number
• To insert an 8-cm disc, place it in the inner recess.
3 Press 0(or OPEN/CLOSE on the remote
To stop playback completely
control unit) to close the disc tray.
Press 7.
4 Press 3on the player or 3(SELECT) on the
remote control unit.
Hint
If you press 0during playback, the player stops playback and
opens the disc tray.
The player starts playback from the beginning.
• Depending on the disc, playback starts when you close the
disc tray.
To stop playback temporarily
Press 8.
To resume playback, press 3(SELECT).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the resume mode
The player has three resume modes; ON, OFF and DISC
RESUME.
• You can select the mode using the preference display (see
page 26).
73
When the resume mode is “OFF”
Playback always starts from the beginning.
When the resume mode is “DISC RESUME”
The player memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
The memory of the interrupted positions are not cleared even if
you open the disc tray or turn off the player.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
“resuming” position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
7
3(SELECT)
• For a double-sided DVD VIDEO disc, the player regards each
side as a different disc. Therefore, to resume playback of such a
disc, the disc must be inserted with the same side down.
• When the player memorizes an iterrupted point for a disc, it also
memorizes Audio, Subtitle and Angle settings.
• The player may not resume playback exactly from the
interrupted point. In the case of an SVCD/Video CD disc with
PBC function, the player may resume playback from a point
slightly earlier or later than the point where playback was
interrupted.
Restarting playback after stopping
(resuming playback)
About On-screen guide icons
You may see the following icons displayed over the picture.
They have the following meanings.
The player resumes playback from the position you interrupted
playback, as long as the disc you interrupted playback is still on
the disc tray.
This is because the player’s resume mode is set to ON when you
purchased the player.
: Appears at the beginning of playback mode.
: Appears at the beginning of pause mode.
When the resume mode is set to ON, the player memorizes the
position on a disc where you interrupted playback.
• When you press 7to interrupt playback, the TV screen shows
[RESUME STOP] and the [RESUME] indicator lights up in the
display window.
: Appears at the beginning of fast forward/backward
playback with the current speed (see page 11).
• When you re-start playback, the TV screen shows [RESUME
PLAY].
: Appears at the beginning of slow-motion playback
with the current speed (see page 11).
Hint
The memory of the interrupted position is not cleared even if you
turn off the player.
: Appears at the beginning of a scene recorded from
multiple angles (see page 16).
To play back from the beginning
Press 7while the disc is stopped.
The memory is cleared.
: Appears at the beginning of a scene recorded with
multiple audio languages (see page 16).
Then press 3(SELECT).
: Appears at the beginning of a scene recorded with
multiple subtitle languages (see page 15).
NOTES
• The player remembers the interrupted position even if you turn
the power off.
• The memory is cleared if you open the disc tray.
You can change the setting so that the on-screen guide icons
do not appear on the TV screen (see page 26).
About screen saver function
A television monitor may have an image burned into it if a static
image is displayed for a long time. To prevent this, the player
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed
while no button is pressed for over 5 minutes.
When the screen saver function is activated, the TV screen
gets darker.
Pressing any buttons will release the screen saver function.
You can set the screen saver function to ON or OFF (see page
25).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
x1.5 Quick Playback with sound
Various kinds of
playback
When you select 1.5 times normal speed playback, the disc is
played back with sound.
• For DVD VIDEO discs, the subtitle does not go off.
• At the x1.5 Quick Playback mode, the digital sound is output in
stereo linear PCM format.
• To switch from rapid reverse playback to x1.5 Quick Playback,
first press 3(SELECT), then press ¡once.
To advance a still picture frame by frame
38
While paused, press 8.
Each time you press 8, the still picture advances to the next
frame.
4¢
Pressing 3(SELECT) returns to normal playback.
To play back in slow motion
You can select from 1/32 times, 1/16 times, 1/4 times and 1/2
times normal speed.
¢
4
During playback, press 8, then press ¡(to
play forward slow motion), or 1(to play
reverse slow motion, for DVD VIDEO disc
only).
3(SELECT)
8
Pressing 3(SELECT) returns to normal playback.
NOTES
• During slow motion playback, the sound will be muted.
• Reverse slow motion playback is not possible for an SVCD and
Video CD.
Playback at various speeds
To replay the previous scenes
(One touch replay function)
To advance or reverse playback rapidly
while monitoring
During DVD VIDEO playback, press
The playback position moves back 10 seconds before the
current position.
.
During playback, press ¡or 1on the
remote control unit.
You can select from 1.5 times, 5 times, 20 times and 60 times
normal speed. Pressing 3(SELECT) returns the player to
normal playback.
NOTES
• This function works only within the same title, though it works
between chapters.
• This function may not work with some DVD VIDEO discs.
During playback, hold down ¢or 4.
Playback is advanced or reversed at 5 times normal speed.
NOTE
During rapid playback, the sound will be muted except when
playing an Audio CD, and when playing a DVD VIDEO or Video
CD at 1.5 times normal speed. For Audio CD discs, the sound will
be heard intermittently.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing from a specific position
Numeric buttons
Locating a desired scene from the DVD
menu
RETURN
TOP MENU
5/∞/2/3
TITLE/GROUP
MENU
ON SCREEN
¢
3(SELECT)
ENTER
4
7
DVD VIDEO discs generally have their own menus which show
the disc contents. These menus contain various items such as
titles of movies, names of songs, or artist information, and display
them on the TV screen. You can locate a desired scene using the
DVD menu.
1 While a DVD VIDEO disc is inserted, press
TOP MENU or MENU.
The menu appears on the TV screen.
2 Press 5/∞/2/3to select a desired item, then
press ENTER or 3(SELECT).
Locating the beginning of a scene or
song
The player starts playback of the selected item.
Hints
• Some DVD VIDEO discs may also have a different menu which
appears when MENU is pressed.
• See the instructions of each DVD VIDEO disc for its particular
menu.
• With some discs, you can select items by entering the
corresponding number using the numeric buttons, which may
cause the player to automatically start playback.
For DVD VIDEO: During playback, you can skip a chapter or title,
depending on the disc configuration.
For SVCD/Video CD: During playback without PBC function, you
can skip a track.
For Audio CD: During playback or while in stop mode, you can
skip a track.
NOTE
The MENU button does not work while stopped.
To skip forward, press ¢.
To skip backward, press 4twice.
Locating a desired scene from the menu of
a SVCD/Video CD with PBC
Using the numeric buttons
For DVD VIDEO/Audio CD: During playback or while in stop
mode
For SVCD/Video CD: During playback without PBC function or
while in stop mode
Some SVCD/Video CD discs support the PBC function. PBC is
an abbreviation of “Playback Control.” Some SVCD/Video CD
discs recorded with PBC have their own menus, such as a list of
the songs of the disc. You can locate a specific scene by using
the PBC menu.
Press the numeric buttons to specify the
number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
1 In stop mode, press 3(SELECT) or TOP
MENU.
A disc menu appears on the TV screen.
The player starts playback from the beginning of the
selection.
2 Press the numeric buttons to select the
desired item.
NOTES
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
• Depending on the disc type and the unit status, what is
specified differs:
Player status Disc type
What is specified
The player starts playback of the selected item.
To return to the menu, press RETURN.
While stopped
DVD VIDEO
title
Hint
If something like [NEXT] or [PREVIOUS] appears on the TV
screen, pressing ¢advances to the next page, and pressing
4returns to the previous page.
SVCD/Video CD/Audio CD
track
chapter
track
During playback DVD VIDEO
SVCD/Video CD/Audio CD
• During DVD VIDEO playback, if a menu is shown on the TV
screen, the numeric buttons may be used for selecting an item
in the menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press the numeric buttons (0 to 9) to enter
the desired time.
About PBC (Playback Control)
Some SVCD/Video CD discs support the PBC function.
The PBC function allows you to enjoy menu-driven operation
and high-resolution still images which have a resolution four
times greater than moving pictures.
• To play a PBC-compatible SVCD/Video CD disc without
activating the PBC function, press the numeric buttons
instead of 3(SELECT) to start playback.
• To activate the PBC function again,
The specified time is displayed in the pull-down menu.
Example (for DVD VIDEO)
To play back from 2(H):34(M):00(S)
Press 2, 3, then 4.
TIME 2:34:__
Example (for SVCD/Video CD/Audio CD)
To play back from 23(M):40(S)
Press 2, 3, then 4.
1) press TOP MENU or MENU,
or
2) press 7to stop playback, then press 3(SELECT) .
TIME
23:4_
You do not have to press “0” to enter the trailing zeros (for the
last two digits in the example above).
Specifying a desired title/group
To correct a mistake
Press 2repeatedly to move back to the digit where you
entered a wrong number, and reenter the correct one.
1 During playback, press TITLE/GROUP.
4 Press ENTER.
[--] is shown in the title display area of the display window.
The player starts playback from the specified time.
2 Press the numeric buttons to specify a title or
group to be played.
To dismiss the menu bar
Press ON SCREEN.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Hint
“10” and “+10” buttons are not used with this function.
The player starts playback from the specified title or group.
NOTES
NOTE
• Some DVD VIDEO discs do not contain time information, and
the time search function cannot be used.
This function may not work with some DVD VIDEO discs.
• The time search function cannot be used during program and
random playback modes.
Locating a desired position in the current
title, group or track (Time search)
Changing the playback order
You can play a disc from the desired position by specifying the
time from the beginning of the current title (for DVD VIDEO) or
the disc (for SVCD/Video CD/Audio CD).
To play back in a specific order (Program
play)
For DVD VIDEO/Audio CD: During playback or while in stop
mode
For SVCD/Video CD: In any condition except SVCD/Video CD
playback with PBC
By programming tracks, you can play up to 99 tracks in any order.
You may program the same track more than once.
1 Press ON SCREEN twice.
1 In stop mode, press ON SCREEN twice.
The menu bar appears on the TV screen.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
PROG.
2 Press 2/3to move
to
.
ENTER.
Screen example for Audio CD
The pull-down menu for entering time appears.
TRACK 33 TIME 25:58
Screen example for DVD VIDEO
OFF
PROG. RND.
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
OFF
CHAP.
3 Press ENTER.
TIME _:__:__
The program table appears.
The [PROG] indicator lights up in the display window.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the program contents
During playback, press 7. Playback stops and the program table
is shown.
Numeric buttons
When the player is playing back an Audio CD and the program
table is not shown, you can bring up the table by carrying out
steps 1 to 3.
During SVCD/Video CD playback, you can check the program
contents via the menu bar.
CANCEL
5/∞/2/3
To stop program playback
ON SCREEN
ENTER
Press 7.
7
3(SELECT)
To clear the program
REPEAT
SUBTITLE
While stopped and the program table is shown, press 7.
To exit the program mode
After clearing the program, press ON SCREEN.
NOTE
When the disc tray is opened or the player is turned off, the
program is cleared.
4 Press the numeric buttons to specify tracks
in the desired order.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
To play back in random order (Random play)
The total program time
1 In stop mode, press ON SCREEN twice.
Total Program Time
00:25:12
PROGRAM
The menu bar appears on the TV screen.
No.
TrackDisc
1
2
3
4
5
6
7
8
2
3
7
4
3
5
6
1
5
4
2
3
4
6
RND.
2 Press 2/3to move
to
.
Screen example for Audio CD
TRACK 33 TIME 25:58
OFF
PROG. RND.
9
10
3 Press ENTER.
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP. 7DELETES ALL.
The player starts random playback.
With a SVCD/Video CD disc, the menu bar is automatically
dismissed.
During random playback, the [RND] indicator lights up in the
display window.
After playing all tracks of the disc, the player stops the disc
and exits the random playback mode.
Selected track number
To correct the program
Press 5/∞to move
to the track to be corrected, then
press CANCEL. The track is erased and the subsequent
programmed tracks move up.
Pressing 7clears all the programmed tracks.
To stop and quit random playback
Press 7. The player stops playback and exits the random
playback mode.
5 Press 3(SELECT) to start program playback.
With an Audio CD disc, the program table remains on the TV
screen during program playback. (Pressing ON SCREEN
brings up the status bar.)
When all of the programmed tracks have finished playback,
the player stops and the program table appears again.
Note that the program remains.
• During program playback, you cannot edit the program
contents.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press ENTER at the beginning of the part you
want to repeat (point A).
Repeat playback
The pull down menu disappears.
A-
The repeat icon shows
.
To repeat the current selection or all tracks
5 Press ENTER at the end of the part you want
to repeat (point B).
A-B
The repeat icon shows
.
The player locates “A” and starts repeat playback between
“A” and “B.”
For DVD VIDEO: During playback
For SVCD/Video CD/Audio CD: In any condition except SVCD/
Video CD playback with PBC
The [
] indicator lights in the display window.
Press REPEAT.
If you press REPEAT in stop mode, press 3(SELECT) to
start playback.
Each time you press REPEAT, the repeat mode cycles
among All repeat, Repeat 1 and off.
The indication on the display window shows the selected
repeat mode.
To quit A-B repeat playback
A-B
Press 2/3to move
to
, and press ENTER twice.
The A-B repeat mode turns off, then normal playback continues.
NOTE
The A and B points must be set in the same title/track.
: Repeats the current title for DVD VIDEO or all tracks
for SVCD/Video CD/Audio CD.
1: Repeats the current chapter for DVD VIDEO or the
current track for SVCD/Video CD/Audio CD.
No indication: The repeat mode is off.
Changing the language, sound and
scene angle
A window which indicates the current repeat mode will be
displayed on the TV screen. The mode indication on the window
is same as the one on the menu bar.
To select the subtitle language (SUBTITLE)
(Repeat mode example on the TV screen)
CHAP
Some DVD VIDEO and SVCD discs contain more than one
subtitle language. You can choose a desired one from them.
To stop repeat playback
Press 7.
Hint
When a DVD VIDEO disc is set, the player stops playback and
quits the repeat mode.
At the beginning of a DVD VIDEO disc where subtitles are
recorded,
appears on the TV screen (except when the [ON
When an SVCD, Video CD or Audio CD disc is set, the player
stops playback but does not quit the repeat mode.
SCREEN GUIDE] preference is set to [OFF]).
1 During playback, press SUBTITLE.
To quit repeat playback
Press REPEAT until the repeat mode indicator goes off in the
display window.
The subtitle selection window appears on the TV screen.
1/3
Hint
ENGLISH
When the program playback mode is active with an SVCD, Video
CD or Audio CD, the repeat mode changes in the same manner.
Note, however, that in the “
programmed tracks instead of all tracks on the disc.
” mode the player repeats all the
2 Press 5/∞or SUBTITLE to select the subtitle.
Each time you press 5/∞or SUBTITLE, the subtitle
language changes.
NOTE
The repeat playback may not work with some discs, even if you
select one of the repeat modes.
3 Press ENTER.
Subtitles are displayed in the selected language.
The subtitle selection window is dismissed.
To repeat a desired part (A-B repeat
playback)
NOTES
• An SVCD disc can have up to four subtitles. Pressing 5/∞
cycles through those channels regardless of whether the
subtitles are recorded or not.
• The subtitle selection window will automatically disappear if you
do not change the subtitle for several seconds.
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 32.
First make sure:
• The player is in playback mode except SVCD/Video CD
playback with PBC.
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
ENTER.
The pull-down menu for repeat mode selection appears.
3 Press 5/∞to select [A-B].
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a scene angle of DVD VIDEO
(ANGLE)
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
5/∞/2/3
ENTER
Hint
At the beginning of a “multi-angle” part,
screen (except when the [ON SCREEN GUIDE] preference is set
to [OFF]).
appears on the TV
VFP -
PROGRESSIVE SCAN
3D PHONIC
ANGLE
ZOOM
AUDIO
1 During playback, press ANGLE.
The angle selection window appears on the TV screen.
1/3
1
To change the audio language or sound
(AUDIO)
2 Press 5/∞or ANGLE to select the desired
angle.
Each time you press 5/∞or ANGLE, the angle changes.
3 Press ENTER.
The audio selection setting allows you to change the audio
language of a movie, or to listen to karaoke with or without the
vocal.
You can see the picture from the selected angle.
The angle selection window is dismissed.
Hint
NOTE
At the beginning of the part where multiple audio tracks are
The angle selection window will automatically disappear if you do
not change the angle for several seconds.
recorded,
appears on the TV screen (except when the [ON
SCREEN GUIDE] preference is set to [OFF]).
1 During playback, press AUDIO.
Special picture and sound effects
The audio selection window appears on the TV screen.
1/3
To zoom in pictures
ENGLISH
2 Press 5/∞or AUDIO to select the desired
audio.
1 During playback or while paused, press
Each time you press 5/∞or AUDIO, the audio changes.
ZOOM.
Pressing ZOOM causes the player to zoom in on the image.
At the top left of the screen, the information for the current
magnification appears for about 5 seconds.
Each time you press ZOOM, the magnification is doubled
(1.8, 4, 8, 16, 32 and 64 times).
For DVD VIDEO (example)
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
L- 2 R-2
For SVCD
ZOOM x 4
ST1
ST2
L- 1
L
R-1
For Video CD
ST (Stereo)
R
When a picture of a DVD VIDEO disc is viewed on a normal
TV screen (4:3, Letter Box), black bars may appear at the top
and bottom of the screen. In this case, if you select the
“ZOOM x1.8” mode, the black bars become almost invisible.
When a 1:2.35 or 1:1.85 DVD VIDEO source is played back,
however, the black bars are visible on the screen.
3 Press ENTER.
You can hear the selected audio.
The audio selection window is dismissed.
NOTES
2 Press 5/∞/2/3to move the zoomed position.
• The audio selection window will automatically disappear if you
do not change the audio for several seconds.
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 32.
To return to the normal playback
Press ENTER.
NOTE
While zoomed, the picture may look coarse.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press ENTER.
To adjust the picture character (VFP)
A window for setting parameters appears.
SATURATION
+ 4
The VFP (Video Fine Processor) function allows you to adjust the
picture character according to the type of programming, picture
tone or personal preferences.
Selected parameter
5 Press 5/∞ to adjust the level of the
parameter.
1 During playback, press VFP - PROGRESSIVE
SCAN.
The higher value enhances the effect.
The VFP mode selection window appears on the TV screen.
6 Press ENTER.
2 Press 2/3to select the desired preset.
Repeat steps 3 to 6 if you want to set other parameters.
Each time you press the button, the VFP mode changes as
follows.
Set the video type most suitable to the current program or the
room conditions.
To dismiss the VFP mode selection window
Press VFP - PROGRESSIVE SCAN.
NORMAL
CINEMA
USER 1
USER 2
NOTE
The window for VFP mode selection and parameter setting
disappear if no operation is made for about 10 seconds.
Selected preset
USER 1
To simulate surround sound (3D PHONIC)
DNR
+
+
+
+
+
+
+
+
0
0
0
0
0
0
0
3
DIGIPURE
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
1 During playback, press 3D PHONIC.
SHARPNESS
The 3D PHONIC window appears on the TV screen.
2 Press 2/3 to select the desired mode.
Parameter
Each time you press the button, the 3D PHONIC mode
changes as follows:
[NORMAL]: for watching TV in a general room.
[CINEMA]: for watching a movie software in a room with
suppressed light.
[USER 1] [USER 2]: you can adjust parameters that affect
the picture character and store the settings as a user
preset. See the next step.
ACTION
DRAMA
THEATER
NONE
ACTION
4
3 To define a user setting, press 5/∞ to select
a parameter to be edited from the following.
Selected effect mode
• DNR (Digital Noise Reduction)
Adjust this if you notice “mosquito noise” (noise that
randomly appears along the edges of digitally compressed
pictures).
Available range: 0 to +1.
• DIGIPURE
Adjust this if you want to enhance clarity of pictures.
Available range: 0 to +3.
• GAMMA
• ACTION
Suitable for action movies and sports programs in which the
sound source moves.
• DRAMA
Natural and warm sound. You can enjoy movies in a relaxed
mood.
• THEATER
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: –4 (darkest) to +4 (brightest).
• BRIGHTNESS
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest).
• CONTRAST
You can enjoy sound effects like in a theater.
3 Press 5/∞to adjust the effect level.
You can set the effect level from [1] to [5].
The higher value enhances the effect.
To dismiss the 3D PHONIC window
Adjust this if the far and near position is unnatural.
Press 3D PHONIC.
Available range: –16 to +16.
• SATURATION
NOTES
Adjust this if the picture is whitish or blackish.
Available range: –16 (blackest) to +16 (whitest).
• TINT
Adjust this if the appearance of flesh tone is unnatural.
Available range: –16 to +16.
• SHARPNESS
Adjust this if the picture is indistinct.
Available range: 0 to +3.
• The 3D PHONIC window disappears if no operation is made for
about 10 seconds.
• The 3D PHONIC function works correctly only when playing
back a DVD VIDEO disc recorded with Dolby Digital.
• When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you can change the
3D PHONIC setting, but you will not be able to achieve a correct
3D effect.
• The 3D PHONIC function does not affect the Dolby Digital
bitstream signal from the DIGITAL OUT jack.
• When the 3D PHONIC function is active, the [ANALOG OUT]
setting in the [AUDIO] setting display is not available.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation procedure
1 Press 2/3to select the icon you want to
work with.
The selected icon is pointed by
.
Numeric buttons
2 Press ENTER.
With many icons, an appropriate pull-down window appears,
however, there are some exceptions.
5/∞/2/3
ON SCREEN
ENTER
NOTES
• A mark or text on the menu icon for the function or mode
currently selected is shown in green.
• Some functions are not available during playback. (You cannot
move
to the associated icon when it is not available.)
Menu bar functions
To bring up the menu bar
1 When a disc is inserted, press ON SCREEN.
A status bar for the type of disc inserted will appear on the TV
screen.
See page 9 for details about the status bar.
2 Press ON SCREEN again.
A menu bar for the type of disc inserted will appear under the
status bar.
(for DVD VIDEO)
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
OFF
CHAP.
1/3
1/5
1/3
(for SVCD)
TRACK 33 TIME
25:58
OFF
PROG. RND.
PROG. RND.
PROG. RND.
ST1
-/4
(for Video CD)
TRACK 33 TIME
25:58
25:58
OFF
ST
(for Audio CD)
TRACK 33 TIME
OFF
To dismiss the menu bar and status bar
Press ON SCREEN.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu bar functions for DVD VIDEO
Menu bar functions for SVCD/Video CD/
Audio CD
Time mode selection
During playback, selects the time mode shown in the display
window and in the status bar.
Time mode selection
Selects the time mode shown in the display window and in the
status bar.
Press ENTER to select the time mode from the following.
• TOTAL: Current title elapsed time
• T.REM: Current title remaining time
• TIME: Current chapter elapsed time
• REM: Current chapter remaining time
Press ENTER to select the time mode from the following.
• TIME: Current track elapsed time
• REM: Current track remaining time (while in stop mode,
current track total time)
• TOTAL: Disc elapsed time
• T.REM: Disc remaining time (while in stop mode, disc total time)
Repeat mode (See also page 15)
Selects the repeat mode during playback.
Repeat mode (See also page 15)
Selects the repeat mode.
1. Open the pull-down window.
2. Press 5/∞to select the repeat mode from the following.
• CHAPTER: Current chapter repeat
1. Open the pull-down window.
2. Press 5/∞to select the repeat mode from the following.
• TRACK: Current track repeat
• TITLE:
• A-B:
Current title repeat
A-B repeat
• OFF:
Repeat mode deactivated
• ALL:
• A-B:
• OFF:
All track repeat
A-B repeat
Repeat mode deactivated
3. Press ENTER to make the selected repeat function active.
3. Press ENTER to make the selected repeat function active.
Time search (See also page 13)
Specifies a time from the beginning of the current title as the
point from which to begin playback.
Time search (See also page 13)
Specifies a time from the beginning of the disc as the point from
which to begin playback.
CHAP.
Chapter search
During playback, specifies a desired chapter to be played back
from.
PROG.
Program playback (See also pages 13 and 14)
While stopped, specifies the playback order of tracks.
1. Open the pull-down window.
2. Press numeric buttons (0 to 9) to enter a desired chapter
number. (For example, to specify “10,” press 1, then 0.)
3. Press ENTER to begin playback from the specified chapter.
RND.
Random playback (See also page 14)
While stopped, activates random playback.
Audio selection (See also page 16)
During playback, selects the audio language or sound track.
Audio selection (See also page 16)
During SVCD/Video CD playback, selects the audio channel(s).
1. Open the pull-down window.
2. Press 5/∞to select a desired audio language or sound track.
3. Press ENTER to begin playback with the selected audio.
1. Open the pull-down window.
2. Press 5/∞to select a desired audio channel(s).
3. Press ENTER to play back with the selected audio channel(s).
Subtitle selection (See also page 15)
During playback, selects the subtitle language.
Subtitle selection (See also page 15)
During SVCD playback, selects the subtitle.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle language.
3. Press ENTER to begin playback with the selected subtitle.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle.
3. Press ENTER to begin playback with the selected subtitle.
Angle selection (See also page 16)
During playback, selects a desired scene angle in a multi-angle
part.
1. Open the pull-down window.
2. Press 5/∞to select a scene angle.
3. Press ENTER to begin playback with the selected scene angle.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes for making your own MP3/WMA disc using a
CD-R/CD-RW disc
MP3/WMA disc
playback
• Select “ISO 9660” as the disc format.
• As for MP3 files, we recommend you to record your material at
a 44.1 kHz sampling rate, using the 128 kbps data transfer rate.
• As for WMA files, make sure that the copyright feature is set to
off.
• As for WMA files, we recommend you to record your material at
a bit rate of 64 kbps or higher.
Basic operations
Use the following buttons to control MP3/WMA disc playback.
ENTER:
Starts playback while stopped.
Numeric
buttons
3(SELECT): Starts playback while stopped or paused.
7:
8:
Stops playback.
Pauses playback.
Skips back or forward a track during playback.
Selects the previous or next track while stopped.
4/¢:
TITLE/GROUP
5/∞/2/3
If you press 3(SELECT) during playback, or press 7to stop
playback followed by 3(SELECT), the player starts playback
from the beginning of the current track.
ON SCREEN
ENTER
4
7
¢
8
NOTES
REPEAT
3(SELECT)
• The player does not support “packet writing (UDF file)” discs.
• The player does not support the ID3 tag and WMA tag.
• The player supports discs recorded with multiple sessions.
• Some discs may not play due to disc characteristics or
recording conditions.
• Programmed and random playback functions do not work with
MP3/WMA discs.
• As for MP3, the player only can play back tracks with the
following file extensions; “.MP3,” “.Mp3,” “.mp3” and “.mP3.”
• As for WMA, the player only can play back tracks with the
following file extensions; “.WMA,” “.wma,” and any other
combination of upper case and lower case letters (such as
“.Wma”).
• Time required for reading the disc contents may vary for
different discs, depending on the numbers of groups (folders)
and tracks (files) recorded, etc.
Operations
The player can play back MP3 files and WMA files on a home
recorded CD-R/RW disc or commercially available CD. We refer
to a disc that contains MP3 and/or WMA files as an “MP3/WMA
disc” in this manual.
Note that if a disc contains both of MP3/WMA files and JPEG
files, you can only play back files of the type selected by the
[MP3&WMA/JPEG] setting in the [PICTURE] preference display
(see page 26).
• You cannot advance or reverse playback by pressing ¡or
1, or by holding down ¢or 4during MP3/WMA disc
playback.
About MP3/WMA discs
On an MP3/WMA disc, each song is recorded as a file (track).
Files are sometimes grouped into folders by artists, album, etc.
• Each file is regarded as a track.
• The player supports WMA files recorded with a bit rate of 48
kbps or higher. The player cannot play back WMA files recorded
with a bit rate under 48 kbps.
• A folder which has one or more files is regarded as a group.
• A folder which does not directly contain any tracks is ignored.
• Files which do not belong to any folder are grouped into “group
1.”
• The player recognizes up to 150 tracks per group, and up to 99
groups per disc. If there are files other than MP3/WMA files,
they also count in the 150-file total.
Selecting the desired group and track
When inserting an MP3/WMA disc, after the disc contents are
read, the MP3/WMA CONTROL display automatically appears on
the TV screen.
You can specify the desired group/track from the display using
the following procedure.
Max. 99 groups per disc
1 Make sure that the black (cursor) bar is in the
left (group) column.
If it is in the right column, press 2to move it to the left
Track 1.mp3
Track 2.mp3
Track 3.mp3
column.
Group 1
2 Press 5/∞to move the bar to a desired
group.
Group 2
On the right column, tracks in the selected group are shown.
Track 4.mp3
Track 5.mp3
Track 6.mp3
Group 4
Group 3
Max.150 tracks
per group
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press 4/¢to select a desired track, then
press ENTER or 3(SELECT).
Repeat playback
During playback or while stopped, press
REPEAT.
Each time you press REPEAT, the repeat mode changes as
follows.
or
Press the numeric buttons to directly specify
a desired track number.
If you press REPEAT while stopped, you need to press
ENTER or 3(SELECT) to start repeat playback.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
MP3/WMA
CONTROL
display
Display
window
Function
The player starts playback from the selected track.
Current track elapsed time
REPEAT TRACK
REPEAT GROUP
REPEAT ALL
Repeats the current
track.
1
MP3/WMA CONTROL
Group : 01 / 10
Time : 00:03:08
Track : 01 / 06 (Total 28)
spring
summer
fall
winter
sea
mountain
camp
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
Repeats all tracks in
the current group.
Repeats all tracks on
the disc.
picnic
skiing
flower
No indication
The repeat mode is off.
(CONTROL display)
Selected repeat mode
Track column of the
current group
Group column
Selected track
MP3/WMA CONTROL
Group : 01 / 10
REPEAT TRACK
Track : 01 / 06 (Total 28)
spring
summer
fall
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
Hint
You can also select a desired track by pressing 3to move the
black bar to the right (track) column then using 5/∞.
To stop repeat playback
Press 7. Note that the repeat mode remains active.
NOTES
• If an MP3/WMA file name includes any 2-byte character, the
player cannot show the file name correctly.
• Only MP3/WMA files are shown on the MP3/WMA CONTROL
display.
• The order of groups/tracks shown in the MP3/WMA CONTROL
display may differ from the order shown on your personal
computer when you set the disc on your computer.
To quit repeat playback
During playback, press REPEAT until no repeat icon is shown on
the display window.
While stopped, press REPEAT until repeat mode indication on
the MP3/WMA CONTROL display goes off.
NOTE
You can change the repeat mode using ON SCREEN on the
remote control unit.
Press ON SCREEN, and the repeat mode selection window
appears on the TV screen. Press then 5/∞to select the desired
repeat mode, and finally press ENTER to make the selected
repeat mode active.
Direct selection
You can select a desired group directly by specifying the group
number.
1 During playback or while stopped, press
TITLE/GROUP.
[--] is shown in the group display area of the display window.
2 Press the numeric buttons to specify a
desired group number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Specify the group number within several seconds after
pressing TITLE/GROUP (i.e. while the display window shows
[--]).
The player starts playback from track 1 of the selected group.
3 Press the numeric buttons to specify a
desired track number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The player starts playback from the specified track.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes for making your own JPEG disc using a CD-R/
CD-RW disc
• Select “ISO 9660” as the disc format.
• We recommend you to record your material at a 640 x 480 pixel
resolution.
JPEG disc
playback
• This player supports the baseline JPEG format.
Basic operations
To see a desired picture
When inserting a JPEG disc, after the disc contents are read, the
JPEG CONTROL display automatically appears on the TV
screen.
Numeric
buttons
JPEG CONTROL
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
summer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
TITLE/GROUP
MENU
ENTER
5/∞/2/3
ON SCREEN
4
¢
7
8
3(SELECT)
REPEAT
ZOOM
You can select a desired file for playback via this display.
1 Make sure that the black (cursor) bar is in the
left (group) column.
The player can play back JPEG files on a home recorded CD-R/
RW disc. We refer to a disc that contains JPEG files as a “JPEG
disc” in this manual.
If it is in the right column, press 2to move it to the left
column.
Note that if a disc contains both of MP3/WMA files and JPEG
files, you can only play back files of the type selected by the
[MP3&WMA/JPEG] setting in the [PICTURE] preference display
(see page 26).
2 Press 5/∞ to move the bar to a desired
group.
On the right column, files in the selected group are shown.
3 Press 4/¢ to select a desired file, then
press ENTER.
About JPEG discs
The selected file (still picture) is shown on the TV.
On a JPEG disc, each picture is recorded as a file. Files are
sometimes grouped into folders by category, etc.
• A folder which has one or more files is regarded as a group.
• A folder which does not directly contain any files is ignored.
• Files which do not belong to any folder are grouped into “group
1.”
Hint
You can also select a desired file by pressing 3to move the black
bar to the right (file) column then using 5/∞.
NOTE
• The player recognizes up to 150 files per group, and up to 99
groups per disc. If there are files other than JPEG files, they
also count against the 150-file total.
If the selected file is unplayable, a black screen appears.
To display another picture
Press 4/¢or 5/∞to select the desired picture.
Max. 99 groups per disc
To dismiss the picture
File 1.jpg
File 2.jpg
File 3.jpg
Press 7or MENU.
The TV screen returns to the JPEG CONTROL display.
Group 1
Group 2
File 4.jpg
File 5.jpg
File 6.jpg
Group 4
Group 3
Max.150 files
per group
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
To select the start point of the slide show
• The player supports the baseline JPEG format.
• The player does not support “packet writing (UDF file)” discs.
• The player supports discs recorded with multiple sessions.
• The player may not be able to read some discs, or may take a
long time to display a picture on the disc, due to disc
characteristics, recording conditions, or numbers of groups
(folders), etc.
From the JPEG CONTROL display
1 Make sure that the black (cursor) bar is in the
left (group) column.
If it is in the right column, press 2to move it to the left
column.
• Programmed and random playback functions do not work with
JPEG discs.
• The screen saver function will be activated if the same picture is
displayed for more than 5 minutes except during slide show
playback.
2 Press 5/∞ to move the bar to a desired
group.
• The player only can play back files with the following file
extensions; “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any other
combination of upper case and lower case letters (such as
“.Jpg”).
• If a JPEG file name includes any 2-byte character, the player
may not show the file name correctly.
• If a picture has been saved at greater than 640 x 480 pixel
resolution, it may take some time to display the picture.
• The player does not support pictures of more than 2400 pixels
in horizontal resolution. Make sure that the horizontal resolution
of the picture is 2400 pixels or less.
3 Press 4/¢ to select a desired file.
4 Press 3(SELECT).
The slide show starts from the specified file.
Direct selection
1 During playback or while stopped, press
TITLE/GROUP.
2 Press the numeric buttons to specify a
desired group number.
To zoom in the picture
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
1 While in pause mode, press ZOOM.
Pressing ZOOM causes the player to zoom in on the image.
Each time you press ZOOM, the manginication is doubled
(1.8, 4, 8, 16, 32 and 64 times).
3 Press the numeric buttons to specify a
desired file number.
The player starts slide show playback from the specified file.
If you do not specify a file, the player starts slide show
playback from the first file in the group.
2 Press 5/∞/2/3to move the zoomed position.
Viewing pictures continuously (slide
Repeat function
In the slide show mode, you can repeat playback of JPEG files in
a group or on the disc.
show mode)
You can see files (still pictures) one after another automatically.
1 While the JPEG CONTROL display is shown,
press REPEAT.
To start the slide show
Pressing REPEAT switches the repeat mode.
Press 3(SELECT).
The slide show starts from the beginning of the disc.
Each file (still picture) is displayed for approximately 3
seconds.
When the repeat mode is turned on, the [
in the display window.
The selected repeat mode is shown on the JPEG CONTROL
display.
] indicator lights
REPEAT ALL:
REPEAT GROUP: All files in the current group are repeated.
No indication: The repeat mode is off.
All files on the disc are repeated.
To stop slide show playback in the middle
Press 7or MENU.
The TV screen returns to the JPEG CONTROL display.
Pressing 3(SELECT) resumes slide show playback from the last
picture displayed.
2 Press 3(SELECT) to start repeat playback.
To stop repeat playback
Press 7.
The repeat mode remains active.
To keep showing the current picture
Press 8or ENTER.
Pressing 3(SELECT) resumes the slide show playback.
To quit repeat playback
Press 7or MENU while the JPEG CONTROL display is shown,
and press REPEAT until the repeat mode indication goes off.
NOTE
You can change the repeat mode using ON SCREEN on the
remote control unit.
Press ON SCREEN, and the repeat mode selection window
appears on the TV screen. Press then 5/∞to select the desired
repeat mode, and finally press ENTER to make the selected
repeat mode active.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
OTHERS
RESUME
ON
Changing the
initial settings
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
DVD1
AV COMPULINK MODE
PARENTAL LOCK
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
How to set preferences
1 Press SET UP.
One of the preference on-screen displays appears on the TV
screen.
You can see four icons at the top right of the on-screen
display for the settings.
: LANGUAGE menu
: PICTURE menu
: AUDIO menu
5/∞/2/3
ENTER
: OTHERS menu
SET UP
2 Press 2/3to select the appropriate icon.
The appropriate display appears on the TV screen.
3 Press 5/∞to move
to select the item you
want to edit.
The color of the selected item changes.
4 Press ENTER.
A pull-down menu appears over the selected item.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
Selecting preferences
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
This section refers to the settings which are already made when
you purchase the player. Read this section when you want to
connect this player to a wide-vision TV set, or when you want to
otherwise change the settings according to your preferences and
viewing environment.
SPANISH
FRENCH
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
Selected item
5 Press 5/∞to select from the options then
About the Preference display
The Preference display consists of the LANGUAGE, PICTURE,
AUDIO, and OTHERS setting displays, each having setting items.
press ENTER.
The selected option is set.
• For details about each setting, see the following.
LANGUAGE
To dismiss a preference display
Press SET UP.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
NOTES
ON SCREEN LANGUAGE
ENGLISH
• While an MP3/WMA or JPEG disc is inserted, you cannot bring
up any preference display.
• When a preference display is shown on a wide TV screen, the
upper and lower parts of the preference display sometimes may
be cut off. If this happens, adjust the picture size control of the
TV.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
PICTURE
PICTURE
MONITOR TYPE
4:3 LB
AUTO
PICTURE SOURCE
SCREEN SAVER
MP3&WMA/JPEG
ON
MP3&WMA
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
AUDIO
AUDIO
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
STREAM/PCM
STEREO
D RANGE CONTROL
OUTPUT LEVEL
NORMAL
STANDARD
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
[16:9 AUTO] (Wide television screen): select when you
connect the player to a wide-screen (16:9) TV.
LANGUAGE menu
MENU LANGUAGE
You can select the default menu language to be displayed if it is
contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
• If the disc does not have a menu in the selected language, the
disc’s default language will be used.
[4:3 LB] (Letter Box conversion): select when you connect the
player to a normal (4:3) TV.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 32.
• You cannot change the setting during playback.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is shown with black bars at the top and
bottom.
AUDIO LANGUAGE
You can select the default audio language to be played if it is
contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
• If the disc does not have the selected language, the disc’s
default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 32.
• You cannot change the setting during playback.
[4:3 PS] (Pan Scan conversion): select when you connect the
player to a normal (4:3) TV.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is zoomed to fill the screen vertically, and the
left and right sides of the image are chopped off.
Note, however, that the picture will be shown in the 4:3 LB
mode even if you select the 4:3 PS mode depending on the
disc.
SUBTITLE
You can select the default subtitle language to be displayed if it is
contained on a DVD VIDEO disc.
Setting options
OFF, ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, language code from AA to ZU
• If the disc does not have a subtitle in the selected language, the
disc’s default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 32.
• You cannot change the setting during playback.
PICTURE SOURCE
ON SCREEN LANGUAGE
You can select the on-screen display language of the player.
This mode selects whether the content on the disc is processed
by field (video source) or by frame (film source). You can obtain
optimal picture quality according to the source type to be played
back by selecting an appropriate option. This setting is available
for both the interlaced mode and progressive scanning mode.
Setting options
ENGLISH, SPANISH, FRENCH
• Some on-screen messages are shown in English regardless of
the setting.
Setting options
VIDEO(NORMAL), VIDEO(ACTIVE), FILM, AUTO
[VIDEO(NORMAL)]: select when playing back a video source
disc with relatively a few movements.
• You cannot change the on-screen language shown on the MP3/
WMA display.
[VIDEO(ACTIVE)]: select when playing back a video source disc
with relatively a lot of movements.
[FILM]: select when playing back a film source disc.
[AUTO]: select when playing back a disc containing both video
and film source materials.
The player recognizes the picture type (film or video source) of
the current disc according to the disc information. Normally,
select this option.
PICTURE menu
MONITOR TYPE
You can select the monitor type to match your TV when you play
back DVD VIDEO discs recorded for wide-screen televisions.
Setting options
SCREEN SAVER
16:9 NORMAL, 16:9 AUTO, 4:3 LB, 4:3 PS
[16:9 NORMAL] (Wide television screen): select when you
connect the player to a wide-screen (16:9) TV whose aspect
ratio is fixed to 16:9 (the player automatically adjusts the screen
width of the output signal correctly when playing back a 4:3
source).
You can set the screen saver function to ON or OFF. (See page
10.)
Setting options
ON, OFF
If you play a 4:3 DVD VIDEO source using the [16:9 NORMAL]
mode, the picture character changes slightly due to the process
for converting the picture width.
To change the setting, see “How to set preferences” on page 24.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3&WMA/JPEG
D. RANGE CONTROL
The player can play MP3/WMA and JPEG files recorded on a
CD-R/CD-RW disc. However, if a disc contains both MP3/WMA
and JPEG files, you can only play files of the type selected in this
menu item.
This setting provides optimal audio quality from the analog
AUDIO OUT terminals for listening to DVD VIDEO discs recorded
in Dolby Digital format, at low or middle volume.
Setting options
Setting options
WIDE RANGE, NORMAL, TV MODE
MP3&WMA, JPEG
[MP3&WMA]: when selected, only MP3/WMA files can be played
back.
[WIDE RANGE]: when selected, audio is played back with the
widest dynamic range so that you can enjoy powerful playback
sound.
[JPEG]: when selected, only JPEG files can be played back.
[NORMAL]: normally, select this option.
[TV MODE]: select if DVD VIDEO disc sound level is lower than
TV program sound level. Thus you can hear sound at a lower
volume clearly.
NOTE
If you have made a change to the [MP3&WMA/JPEG] setting,
open and close the disc tray, or turn off and on the player. Doing
so will make the change effective.
OUTPUT LEVEL
This setting allows you to attenuate the level of the signal output
from the player’s analog AUDIO OUT jacks.
AUDIO menu
Setting options
STANDARD, LOW
• If the sound output from the speaker is distorted, select [LOW].
DIGITAL AUDIO OUTPUT
To connect the player’s digital output to an external device
equipped with a digital input, this item must be set correctly.
See “Appendix C: Digital output signal chart” on page 33 for
details about the relation between the setting and output signals.
OTHERS menu
Setting options
RESUME
You can select the resume playback mode.
PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM
[PCM ONLY]: select when you connect the DIGITAL OUT jack of
the player to the linear PCM digital input of other audio
equipment.
[DOLBY DIGITAL/PCM]: select when you connect the digital
input of a Dolby Digital decoder or an amplifier with a built-in
Dolby Digital decoder.
When this option is selected, playing back a DTS-encoded disc
or disc recorded by the MPEG Multichannel format outputs a
linear PCM digital signal.
[STREAM/PCM]: select when you connect the digital input of an
amplifier with a built-in DTS, MPEG Multichannel or Dolby
Digital decoder, or the stand-alone unit of such a decoder.
See page 10 for details about the resume playback function.
Setting options
ON, OFF, DISC RESUME
[ON]: when selected, the player can resume playback of the disc
from the position where playback was last interrupted, if the
disc is still in the disc tray.
[OFF]: when selected, the resume function is deactivated.
[DISC RESUME]: when selected, the player can resume
playback of the last 30 discs played. The player retains a
memory of the interrupted positions of the last 30 discs played,
even though they have been removed from the disc tray.
NOTE
ON SCREEN GUIDE
The player can display “on-screen guide” icons or characters on
the picture, which show what is happening to the disc or the
player.
When [STREAM/PCM] is selected, note the following points:
- With some DVD VIDEO discs that are not fully copy-protected,
a 20 or 24 bit digital signal may be output.
- A signal recorded with the 96 kHz or higher sampling
frequency is output from the DIGITAL OUT jack with the 48
kHz sampling frequency.
Example of “on-screen guide” icons:
,
,
Setting options
- When playing a DVD VIDEO or Audio CD disc with DTS, use
a DTS decoder to get correct signals from your speakers.
ON, OFF
[ON]: when selected, the on-screen guide is activated.
ANALOG DOWN MIX
AUTO STANDBY
When the player is stopped for more than 30 minutes or 60
minutes, the player enters standby mode automatically.
To correctly play the audio on a DVD VIDEO disc recorded with
surround multichannel audio, you must set this item properly
according to your audio system configuration.
(This function does not work when 3D PHONIC function is
activated.)
Setting options
60, 30, OFF
Setting options
DOLBY SURROUND, STEREO
AV COMPULINK MODE
You must set this item correctly to use the AV COMPU LINK
system.
[DOLBY SURROUND]: select when listening to multichannel
surround audio with the player’s analog AUDIO OUT terminals
connected to a surround decoder.
[STEREO]: select when listening to conventional two-channel
stereo audio with the player’s AUDIO OUT terminals connected
to a stereo amplifier/receiver or television set, or in case you
want to record the audio from a DVD VIDEO disc to MiniDisc,
cassette, etc.
Setting options
DVD1, DVD2, DVD3
• See page 29 for details about the AV COMPU LINK function.
To change the setting, see “How to set preferences” on page 24.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press 5/∞to select the country code.
PARENTAL LOCK
Select the code of the country whose standards were used to
rate the DVD VIDEO disc content.
When this option is selected, pressing ENTER on the remote
control unit brings up the PARENTAL LOCK display shown below.
This allows you to restrict children from playing DVD VIDEO
discs.
See “Appendix A: Country/Area code list for Parental Lock”
on page 32.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
PARENTAL LOCK
NONE
_ _ _ _
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
TV
TW
TZ
UA
UG
UM
US
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
SELECT
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
ENTER
• See this page for details about the parental lock setting.
5 Press ENTER.
moves to [SET LEVEL].
6 Press ENTER to bring up the pull-down
Numeric buttons
menu.
In the pull-down menu, [NONE] and levels [8] to [1] are
available.
[NONE] does not restrict playback. Level [1] is the strictest
level. Discs rated higher than the selected level are restricted.
5/∞
ENTER
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
8
7
6
5
4
3
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
7 Press 5/∞to select a desired parental lock
level, then press ENTER.
moves to [PASSWORD].
8 Press the numeric buttons (0 to 9) to enter a
Limiting playback by children
4-digit password.
This function restricts playback of DVD VIDEO discs which
contain violent (and other) scenes according to the level set by
the user. For example, if a movie which includes violent scenes
supports the parental lock feature, such scenes which you do not
want to let children view can be cut or replaced with other
scenes.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
1234
To set Parental Lock for the first time
...
SELECT
NEW PASSWORD? PRESS 0 ~ 9 KEY
TO EXIT, PRESS SETUP.
ENTER
9 Press ENTER.
The parental lock feature is set.
1 In stop mode, bring up the OTHERS menu.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
2 Press 5/∞to move
to select [PARENTAL
LOCK] then press ENTER.
The Parental Lock on-screen display appears on the TV
screen.
Hint
If you want to change the password at step 8, do it before
pressing ENTER.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS SETUP.
3 While
is pointing to [COUNTRY CODE],
press ENTER to bring up the pull-down
menu.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
To temporarily release the Parental Lock
Numeric buttons
If the parental level is set to a strict value, some discs may not
play at all.
When you insert such a disc and try to play it, the following
parental lock on-screen display appears on the TV screen, asking
you whether you want the parental lock to be temporarily
released or not.
5/∞
ENTER
1 Press 5/∞to move
to [TEMPORARY
RELEASE], then press ENTER.
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
To change the settings
2 Press the numeric buttons (0 to 9) to enter
your 4-digit password.
The Parental Lock is released, and the player starts
playback.
If you enter a wrong password, [WRONG! RETRY...] appears
on the TV screen. Enter the correct password.
You can change the parental lock settings later.
1 In stop mode, bring up the OTHERS menu.
NOTE
2 Press 5/∞to move
to select [PARENTAL
LOCK] and press ENTER.
When you enter the wrong password 3 times at step 2 above,
moves to [NOT RELEASE] automatically and 5/∞do not work.
The parental lock on-screen display appears on the TV
screen.
3 While
is pointing to [PASSWORD], press
the numeric buttons to enter your current 4-
digit password then press ENTER.
moves to [COUNTRY CODE] if you enter the correct
password.
If you enter a wrong password, [WRONG! RETRY...] appears
on the TV screen, and you cannot go to the next step.
If you forget your password, enter “8888.” The current
password is deleted and you can set a new password.
4 To change the [COUNTRY CODE] or [SET
LEVEL], press ENTER to bring up the
associated pull-down menu when
pointing to the desired item.
is
5 Press 5/∞to select the desired option then
press ENTER.
If you change the country code, you must reselect the
parental lock level.
6 While
is pointing to [PASSWORD], press
the numeric buttons to enter a 4-digit
password.
The password entered in this step becomes the new
password. If you want to keep the same password as before,
enter the same password.
7 Press ENTER.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
NOTE
If you enter the wrong password more than 3 times in step 3
above,
moves to [EXIT] automatically and 5/∞do not work.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you connect the player to a television and VCR via AV
COMPU LINK, set the VCR’s Remote Control Code and the
player’s AV COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television:
The player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
- When connecting to the VIDEO-2 input terminal of the
television:
Additional
information
The player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
To AV COMPU LINK
(ll, EX or lll)
AV COMPU LINK remote control
system
TV
To AV COMPU
LINK
Receiver
The JVC AV COMPU LINK system allows you to enjoy video or
audio with the simplest operation. If your video/audio player (such
as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and
are tied with the JVC AV COMPU LINK cable(s), simply starting
the player will automatically make all necessary settings on the
television and/or amplifier/receiver to allow you to enjoy the
playback.
The player
• If you connect the player to a television and receiver via AV
COMPU LINK, set the player’s AV COMPU LINK setting to
DVD1.
IMPORTANT!
When you make video connection between the player and
another device (such as a receiver and TV) via the composite, S-
video or component jacks, as well as AV COMPU LINK
connection, see also the instruction manual of the other device.
Connection and setup
Using an AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
Notes for connection
• If you connect the player to a receiver via AV COMPU LINK in a
system including a Dolby Digital decoder, some functions may
not be performed automatically.
• Connect the AUDIO OUT jacks of the player to the audio input
jacks of a receiver indicating “DVD.” Otherwise, the system will
not work correctly.
• There may be no description about connections to the player in
the instruction manual of a television or VCR. However, a
television or VCR with AV COMPU LINK terminals indicating
“II,” “EX” or “III” can be connected to the player.
• The player’s AV COMPU LINK setting is controlled using the
OTHERS menu in the preference display. See page 26.
• For information on the connection between a TV and a receiver,
refer to the receiver’s instructions.
To AV COMPU LINK (ll, EX or lll)
TV
The player
Operation
The JVC COMPU LINK system allows you to enjoy video and/or
audio by simply pressing Play on the source component (the
component which plays back the video or audio, such as a DVD
player or VCR). You do not even have to switch on power on the
TV or receiver.
• If you connect the player to a television via AV COMPU LINK,
set the player’s AV COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television: DVD2
- When connecting to the VIDEO-2 input terminal of the
television: DVD3
1 Turn on the main power of the television.
2 Insert a disc (or tape) into the source
To AV COMPU LINK
(ll, EX or lll)
component.
3 Press 3of the source component.
TV
The following actions are performed automatically:
• Turning on the television power.
The player
To AV COMPU LINK
• Setting the source of the television to the external input
(VIDEO-1 or VIDEO-2).
VCR
• Turning on receiver power.
• Setting the source of the receiver to the component which has
started playback.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Troubleshooting
Picture is noisy.
\ The player is connected to a VCR directly and the copyguard
function is activated. Connect the player so that the picture
signal flows directly to the TV.
Power
\ With some discs, the picture may be blurred when [PICTURE
SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE
SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)].
Power does not come on.
\ Power plug is not inserted securely. Plug in securely.
Correct picture cannot be obtained.
Operation
\ Connect only one type of cable to the jack(s) you want to use
on this player, either the VIDEO jack, S-VIDEO jack or
COMPONENT VIDEO OUT jacks. (Note that you can connect
cables to the VIDEO jack and COMPONENT VIDEO OUT
jacks at the same time.) If an S-VIDEO cable is connected to
the S-VIDEO jack, the player is set to the S-VIDEO output
mode automatically.
“REGION CODE ERROR!” is shown on the TV screen.
\ Region code of the inserted disc does not match the player.
Check the region code of the disc printed on the disc jacket.
Operation is not possible.
\ Microcomputer malfunction due to lightning or static electricity.
Turn off the power and unplug the power cord, then connect
the power cord again.
No picture is displayed on the TV screen or the screen is
blurred or divided into two parts.
\ Moisture condensation caused by a sudden change of
temperature or humidity. Turn off the power, then turn it on a
few hours later.
\ The player is in the progressive scanning mode though it is
connected to a TV via the VIDEO or S-VIDEO jack. Set the
480i/480p/REMOTE selector on the rear panel to “480i,” or set
it to “REMOTE” and make the Progressive scanning mode
inactive by using the VFP - PROGRESSIVE SCAN button
(see page 5).
\ The disc does not allow the operation, or an unplayable disc is
inserted. Check and replace the disc (see page 2).
[LOCK] is displayed on the display window and the disc tray
does not open.
\ When you press 0while pressing down 7on the player in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press 0while pressing down 7on the player in
standby mode.
Audio
DVD VIDEO disc playback sound level is lower than TV
broadcast sound level.
\ Set the [D.RANGE CONTROL] preference to [TV MODE] (see
page 26).
Setting cannot be changed in the [LANGUAGE] preference
display.
Analog audio output is distorted.
\ Set the [OUTPUT LEVEL] preference to [LOW] (see page 26).
\ Stop playback and change the setting in the [LANGUAGE]
preference display.
The audio language and subtitle cannot be changed.
\ Only one language is recorded on the disc currently being
played back.
\ The disc being played back does not accept the AUDIO button
and SUBTITLE button operation. Change the subtitle using
[SUBTITLE] in the [LANGUAGE] preference display (see page
25).
MP3/WMA
No sound comes out.
\ MP3/WMA disc is recorded with the “packet writing (UDF file).”
It cannot be played.
Files (tracks) are not played in the recorded order.
\ This player plays the files in the alphabetic order. So, the
playback order can vary.
No subtitle is diplayed.
\ No subtitle is recorded on the disc currently being played
back.
WMA files cannot be played back.
\ [OFF] is selected in [SUBTITLE] in the [LANGUAGE]
preference display. Select the desired language in
[SUBTITLE] (see page 25).
\ The file is copy protected.
\ The file is recorded with a bit rate under 48 kbps. The player
does not support such WMA files.
\ Subtitle may not be displayed correctly during A-B repeat
playback.
JPEG
No picture is played back, or the screen turns black.
\ Format of the files is not the baseline JPEG. The player
supports only the baseline JPEG format.
The preference display cannot be turned on.
\ You cannot turn on the preference display when a JPEG disc
is inserted.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
• Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS 2.0+Digital Out” are trademarks of Digital
Theater Systems, Inc.
• This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Specifications
Specifications and appearance are subject to change without
prior notice.
General
Readable discs
Video format
DVD VIDEO, DVD-R (Video format), DVD-
RW (Video format), SVCD, Video CD, Audio
CD (CD-DA), CD-R/RW (CD-DA, SVCD,
Video CD, MP3/WMA format, JPEG)
REMOTE, 480i (Interlaced scan)/480p
(Progressive scan) selectable
Other
Power requirements
AC 120 V
, 60 Hz
Power consumption
12 W (POWER ON), 2.0 W (STANDBY
mode)
Mass
1.9 kg (4.2 lbs)
Dimensions (W × H × D)
435 mm × 44 mm × 258.6 mm
(17-3/16 inch × 1-3/4 inch × 10-3/16 inch)
Video outputs
COMPONENT (pin jacks)
Y Output: 1.0 Vp-p (75 Ω)
PB/PR Output: 0.7 Vp-p (75 Ω)
VIDEO OUT (pin jack)
1.0 Vp-p (75 Ω)
S-VIDEO OUT (S jack)
Y Output: 1.0 Vp-p (75 Ω)
C Output: 286 mVp-p (75 Ω)
Horizontal resolution
500 lines or more
Audio outputs
ANALOG OUT (pin jack)
2.0 Vrms (10 kΩ)
DIGITAL OUT (COAXIAL)
0.5 Vp-p (75 Ω termination)
DIGITAL OUT (OPTICAL)
–21 dBm to –15 dBm (peak)
Audio characteristics
Frequency response
CD (sampling frequency 44.1 kHz):
2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz):
2 Hz to 44 kHz
Dynamic range
Wow and flutter
16 bit: More than 98 dB
20 bit/24 bit: More than 100 dB
Unmeasurable (less than 0.002%)
Total harmonic distortion
16 bit: less than 0.008%
20 bit/24 bit: less than 0.008%
* Notes for PX model (Check the specification
indication on the rear panel.)
Power requirements
AC 110 V to 240 V
, 50 Hz/60
Hz
Power consumption
12 W (POWER ON), 2.0 W
(STANDBY mode)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
(for page 27)
Appendix A: Country/Area code list for Parental Lock
ER
ES
ET
FI
Eritrea
LA
Lao People’s Democratic
Republic
RW
SA
SB
SC
SD
SE
SG
SH
SI
Rwanda
Saudi Arabia
AD
AE
AF
AG
AI
Andorra
Spain
Ethiopia
Finland
Fiji
Falkland Islands
Micronesia (Federated States
of)
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guinea
Greece
South Georgia and the South
Sandwich
Guatemala
Guam
Guinea-Bissau
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
LB
LC
LI
Lebanon
Solomon Islands
Seychelles
Saint Lucia
Liechtenstein
Sri Lanka
FJ
FK
FM
Sudan
Sweden
Singapore
Saint Helena
Slovenia
LK
AL
LR
LS
LT
LU
LV
LY
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
SJ
Svalbard and Jan Mayen
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
Slovakia
Sierra Leone
San Marino
Senegal
Somalia
Suriname
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Mali
Myanmar
Mongolia
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos Islands
Chad
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
French Southern Territories
TG
TH
TJ
Togo
Thailand
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
Mauritius
Maldives
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UM
MW Malawi
Guyana
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Hong Kong
Heard Island and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
HM
Turkey
Trinidad and Tobago
Tuvalu
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
Taiwan
Tanzania, United Republic of
Ukraine
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Uganda
United States Minor Outlying
Islands
Israel
India
US
UY
UZ
VA
VC
United States
Uruguay
Uzbekistan
British Indian Ocean Territory
Iraq
Iran (Islamic Republic of)
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Vatican City State (Holy See)
Saint Vincent and the
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (U.S.)
Vietnam
VE
VG
VI
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia
Kiribati
Vanuatu
Wallis and Futuna Islands
Samoa
Comoros
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Saint Kitts and Nevis
Korea, Democratic People's
Republic of
Korea, Republic of
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
KR
KW
KY
KZ
Zaire
Zimbabwe
Cayman Islands
Kazakhstan
Réunion
Romania
Russian Federation
Western Sahara
(for pages 15, 16 and 25 )
SU Sundanese
Appendix B: Table of languages and their abbreviations
AA
AB
AF
Afar
FA
FI
Persian
Finnish
Fiji
KM Cambodian
KN Kannada
OM (Afan) Oromo
OR Oriya
Abkhazian
Afrikaans
AM Ameharic
AR Arabic
SV
Swedish
FJ
KO Korean (KOR)
PA
PL
PS
PT
Panjabi
Polish
Pashto, Pushto
Portuguese
SW Swahili
FO Faroese
FY Frisian
GA Irish
GD Scots Gaelic
KS
Kashmiri
TA
TE
Tamil
Telugu
KU Kurdish
AS
AY
AZ
BA
BE
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
KY
LA
LN
LO
LT
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
TG Tajik
QU Quechua
RM Rhaeto-Romance
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA
SD Sindhi
SG Sangho
SH Serbo-Croatian
SI
SK
SL
SM Samoan
SN Shona
SO Somali
SQ Albanian
SR Serbian
TH
TI
TK
TL
TN
Thai
GL
Galician
Tigrinya
Turkmen
Tagalog
Setswana
GN Guarani
GU Gujarati
HA Hausa
BG Bulgarian
BH Bihari
LV
HI
Hindi
MG Malagasy
MI Maori
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
NE Nepali
TO Tongan
BI
Bislama
HR Croatian
HU Hungarian
HY Armenian
IA
IE
IK
IN
IS
IW
JI
Sanskrit
TR
TS
TT
Turkish
Tsonga
Tatar
BN Bengali, Bangla
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
CY Welsh
DA Danish
Bhutani
Greek
EO Esperanto
ET Estonian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
TW Twi
UK Ukrainian
UR Urdu
Singhalese
Slovak
Slovenian
UZ
VI
Uzbek
Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
DZ
EL
Yiddish
JW Javanese
KA
KK
KL
Georgian
Kazakh
NL
Dutch
NO Norwegian
OC Occitan
SS
ST
Siswati
Sesotho
ZU
Zulu
EU Basque
Greenlandic
32
Download from Www.Somanuals.com. All Manuals Search And Download.
(for page 26)
Appendix C: Digital output signal chart
Output
Disc type
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24 bit
linear PCM
48/44.1 kHz, 16 bit, stereo linear PCM
DVD with 96 kHz, 16/22/24 bit
linear PCM
48 kHz, 16 bit, stereo linear PCM (Down sampling)
DVD with DTS
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
DTS bitstream
DTS bitstream
DVD with Dolby Digital
SVCD/Video CD/Audio CD
Audio CD with DTS
CD-R/RW with MP3/WMA
Dolby Digital bitstream
44.1 kHz, 16 bit, stereo linear PCM
44.1kHz, 16 bit, stereo linear PCM
Linear PCM
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Glossary
480i/480p
Interlaced scanning
Indicates the number of scanning lines and scanning format of an
image signal. 480i indicates 480 scanning lines with interlace
format, and 480p indicates 480 scanning lines with progressive
format.
In a conventional video system, a picture is shown on the display
monitor in between lines of two halves. The Interlaced scanning
system places lines of the second half of the picture in-between
lines of the first half of the picture.
JPEG
Aspect ratio
A popular file format for still image compression and storage.
JPEG stands for Joint Photographic Experts Group.
There are three sub-types of the JPEG format as follows.
• baseline JPEG: used for digital cameras, the web, etc.
• progressive JPEG: used for the web
A ratio which defines the shape of the rectangular picture in a TV.
It is the width of the picture relative to the height. A conventional
TV picture is 4:3 in aspect ratio.
Bitstream
• lossless JPEG: an old type, rarely used now
The digital form of multichannel audio data (e.g., 5.1-channel)
before it is decoded into its various channels.
Linear PCM audio
PCM stands for “pulse code modulation.” Linear PCM is the usual
method for digitally encoding audio without compression, and is
used for the audio tracks on DVD VIDEO discs, Audio CDs, etc.
Chapter/title
Chapter is the smallest division and title is the largest division on
DVD VIDEO. A chapter is a division of a title and similar to a track
for Video CD or Audio CD.
MP3
MP3 is an audio data compression format, which stands for
MPEG-1 Audio Layer 3. Using MP3, you can achieve a data
reduction of about 1:10.
Component video
Video signals with three channels of separate information that
makes up the picture. There are some types of component video,
such as R/G/B and Y/CB(PB)/CR(PR).
NTSC (National television system committee)
A black and white and color television system format used in the
U.S.A., Canada, Mexico and Japan.
Composite video
A single video signal commonly used in most consumer video
products that contains all luminance, color, and synchronization
information.
PAL (Phase Alternation by Line)
A color television system format used extensively in Western
Europe.
Dolby Digital (AC3)
A six-channel system consisting of left, center, right, left rear,
right rear and LFE (Low-Frequency Effect channel, for use with a
sub-woofer) channels. All processing is done in the digital
domain. Not all Dolby Digital discs contain six (5.1) channels of
information.
PBC
PBC stands for “Playback control” and is a method of controlling
disc play for Video CDs (VCD). You are able to interact with the
disc through menus.
Progressive scanning
Progressive scanning displays all the horizontal lines of a picture
at one time, as a single frame. A progressive scanning DVD
player converts the interlaced (480i) video from DVD into
progressive (480p) format for connection to a progressive display.
It dramatically increases the vertical resolution.
Dolby Surround/Dolby Pro Logic
Dolby Surround records four channels of front and rear audio in
two channels in a way that allows a decoder to recover the
original four channels for playback. Because the audio is
recorded in two channels, it can be played back naturally by a
two-channel stereo system.
Dolby Pro Logic introduces directional circuits in decoder-side
processing (increasing the level of specific channels and lowering
the level of silent channels) for greater spatial perspective, and
adds a center speaker used primarily for dialog. The result is
enhanced channel separation.
S-video
A video signal which improves picture quality over standard
composite connections. Used on Super VHS, DVD, high end TV
monitors, etc.
Track
The smallest division on SVCD, Video CD and Audio CD discs.
Down-mix
Internal stereo mix of multichannel surround audio by a DVD
player. The down-mix signals are output from stereo output
connectors.
WMA
WMA is an abbreviation of “Windows Media Audio,” and is an
audio data compression format developed by Microsoft
Corporation. Sound quality of data compressed using WMA is
the same as that of MP3, though the WMA file size is smaller
than that of MP3.
DTS
A Digital Surround audio encoding format configured with six
(5.1) channels, similar to Dolby Digital. It requires a decoder,
either in the player or in an external receiver. DTS stands for
Digital Theater Systems.
Not all DTS discs contain six (5.1) channels of information.
Dynamic range
The difference between the loudest and softest sounds.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
1 YR
90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN
0104KTYBICJSC
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|