JVC DVD Player XV 523GD User Manual

XV-521BK [J] EN  
LVT0435-001B  
DVD VIDEO PLAYER  
Introduction  
1
4
XV-521BK/XV-523GD/XV-525BK  
XV-421BK  
Preliminary knowledge  
Getting started  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
12  
17  
20  
35  
41  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
XV-521BK/XV-523GD/XV-525BK models  
SHIFT  
PLAY  
SHUTTLE  
OPEN/CLOSE  
DVD PLAYER  
1
¡
PLAY  
STOP  
#
POWER  
STANDBY  
0
STOP  
7
PA8USE  
UP  
LEFT CURSOR RIGHT  
DOWN  
Basic operations  
Advanced operations  
Initial settings  
TITLE CHAP.  
RESUME THEATER  
3D PHONIC  
SKIP  
DOLBY  
EACH  
4
¢
D
I
G
I
T
A
L
REMOTE CONTROL  
DVD/VDEO CD/CD  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
XV-421BK model  
SHIFT  
PLAY  
OPEN/CLOSE  
XV-421 DVD PLAYER  
PLAY  
STOP  
#
SEARCH  
POWER  
STANDBY  
0
STOP  
7
PA8USE  
1
¡
UP  
LEFT CURSOR RIGHT  
DOWN  
TITLE CHAP.  
RESUME THEATER  
3D PHONIC  
SKIP  
EACH  
DOLBY  
4
¢
D
I
G
I
T
A
L
RM-SXV521J REMOTE CONTROL  
DVD/VDEO CD/CD  
Additional information  
'
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located on the rear, bottom or  
side of the cabinet. Retain this informa-  
tion for future reference.  
Model No.  
Serial No.  
LVT0435-001B  
[J]  
EN XV-521BK[J]COVER-B  
1
00.4.19, 11:50 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Introduction  
Table of contents  
To locate a desired selection using 4 or ¢ ...... 21  
To locate a desired scene by specifying the chapter  
number [CHAP. SEARCH] ....................................... 22  
To locate a desired position in the current title or  
track [TIME SEARCH].............................................. 22  
To locate a desired scene from the digest display  
[DIGEST] .................................................................. 23  
Special picture playback  
To advance a still picture frame-by-frame.............. 24  
To display still pictures [STROBE] ........................... 24  
To playback in slow-motion [SLOW]....................... 25  
To zoom a scene [ZOOM] ......................................... 26  
Changing the playback order  
Page 1  
Introduction  
Features ....................................................................1  
Supplied accessories ............................................... 1  
About this instruction manual ............................... 2  
Notes on handling ................................................... 3  
Page 4  
Preliminary knowledge  
Names of parts and controls  
Front panel ................................................................... 4  
Remote control unit .................................................... 5  
Display window ........................................................... 7  
Rear panel .................................................................... 7  
Operational Principles  
To playback in the desired order [PROGRAM] ....... 26  
To playback in random order [RANDOM]............... 27  
Repeat playback  
On-screen displays...................................................... 8  
To prevent the monitor from burning out  
To repeat the current selection  
[SCREEN SAVER] ...................................................... 9  
On-screen guide icons .............................................. 10  
How to use numeric buttons.................................... 10  
About discs  
or all disc contents [REPEAT] ................................ 28  
To repeat a desired part [A-B REPEAT] ................... 29  
Selecting a scene angle of DVD VIDEO  
To select a scene angle from the normal screen  
[ANGLE] ................................................................... 30  
To select a scene angle from the angle list display  
[ANGLE] ................................................................... 30  
Changing the language and sound  
To select the subtitle language [SUBTITLE] ........... 31  
To change the audio language or sound [AUDIO]. 31  
Selecting the picture character  
To select the picture character  
[THEATER POSITION] ............................................. 32  
Enjoying virtual surround sound  
To simulate surround sound [3D PHONIC] ............. 32  
Checking the status  
Playable disc types.................................................... 11  
Disc structure............................................................. 11  
Page 12  
Getting started  
Connections  
Before making any connections .............................. 12  
To connect to a TV..................................................... 12  
To connect to a TV with the component video  
input jacks................................................................ 13  
To connect to an audio amplifier or receiver ......... 13  
To connect to audio equipment with a digital  
input ......................................................................... 14  
To connect the power cord....................................... 14  
Using the remote control unit  
To check the disc/time information ......................... 33  
To check the DVD function status ............................ 34  
To install batteries in the remote control unit........ 15  
To use the remote control unit for TV operation ... 16  
To control the volume of a JVC’s amplifier or  
receiver .................................................................... 16  
Page 35  
Initial settings  
Selecting preferences  
How to set preferences............................................. 35  
LANGUAGE page ...................................................... 35  
AUDIO page ............................................................... 36  
DISPLAY page............................................................ 37  
SYSTEM page ............................................................ 38  
Limiting playback by children  
Page 17  
Basic operations  
Turning on/off the unit.......................................... 17  
Inserting and removing discs ............................... 17  
Basic playback  
To set Parental Lock for the first time  
To start playback ....................................................... 18  
To stop playback completely ................................... 18  
To stop playback temporarily .................................. 18  
To advance or reverse playback rapidly while  
monitoring ............................................................... 18  
To locate the beginning of the scene or song ........ 19  
To resume playback  
[PARENTAL LOCK] .................................................. 39  
To change the settings [PARENTAL LOCK]............. 40  
To temporarily release the Parental lock  
[PARENTAL LOCK] .................................................. 40  
Page 41  
Additional information  
AV COMPU LINK remote control system  
(not available with XV-421BK)  
To memorize the interrupted position .................... 19  
To resume playback .................................................. 19  
Connection and setup............................................... 41  
Operation ................................................................... 42  
Care and handling of discs.................................... 42  
Troubleshooting ..................................................... 43  
Specifications ......................................................... 44  
Page 20  
Advanced operations  
Playing from a specific position on a disc  
To locate a desired scene from the DVD menu...... 20  
To locate a desired scene from the menu of the  
Video CD with PBC.................................................. 20  
To locate a desired selection using the numeric  
buttons ..................................................................... 21  
Table of languages and their  
abbreviations ....................................... Appendix A  
Country code list for parental lock ...... Appendix B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Introduction  
I
Features  
Supplied accessories  
Picture functions  
• Audio/video cable (x 1)  
7 Strobe function  
The unit can display nine continuous still pictures on  
the TV screen.  
7 Digest function  
You can select the desired title from the opening  
scenes displayed on the TV screen.  
• S-video cable (x 1)  
7 Angle function*  
You can select a desired angle from multiple camera  
angles recorded on the DVD VIDEO disc.  
7 Zoom function  
• AV compulink cord (x 1)  
(except XV-421BK)  
You can view scenes close-up.  
7 Parental lock*  
You can restrict the playback of DVD VIDEO discs with  
scenes which you do not want children to see, such  
as adult or violent films.  
7 Theater position  
You can select the picture character according to the  
lighting of your room.  
• Remote Control Unit (x 1)  
OPEN  
/CLOSE  
SUBTITLE  
3D-PHONIC  
DIGEST  
THEATER  
POSITION  
AUDIO  
1
2
STROBE  
3
TV  
1
TV POWER  
DVD POWER  
ANGLE  
4
5
TV  
4
ZOOM  
TV/VIDEO  
7
8
T
V
2
7
10 TV  
TV RETURN  
T
V
5
T
V
3
SLOW  
T
6
V
8
0
TV  
6
TV  
0
9
AMP  
VOL  
Audio functions  
T
+10  
V
9
SHIFT  
PLAY MODE  
T
TV  
VOL  
V
100+  
B.SEARCH  
CANCEL  
B.SKIP  
DISPLAY  
4
TV  
ch  
PAUSE  
PLAY  
TIME  
RETURN  
8
3
F.SEARCH CHOICE  
F.SKIP  
STOP  
TITLE  
7
¢
LEFT  
ENTER  
MENU  
UP  
CURSOR  
DOWN  
RM-SXV521J REMOTE CONTROL  
RIGHT  
7 High quality digital sound  
You can enjoy high quality sound with Dolby Digital  
or Linear-PCM.  
7 Surround function*  
The unit is compatible with Dolby Digital surround and  
DTS surround.  
• R6P(SUM-3)/AA(15F) batteries (x 2)  
• Instruction manual (x 1)  
(DTS surround is available for digital output only.)  
7 3D Phonic function  
You can enjoy surround sound with your 2-channel  
system.  
Other functions  
7 Multi-language subtitles and sound*  
You can select a subtitle or sound language from those  
recorded on the DVD VIDEO disc.  
7 Multi-disc playback  
You can enjoy Audio CD discs and Video CD discs, as  
well as DVD VIDEO discs.  
• AC power cord (x 1)  
7 Operation from the on-screen display  
User-friendly on-screen displays allow you to operate  
the unit easily.  
Functions with (*) mark only work on a DVD VIDEO disc  
that is compatible with each function.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Introduction  
About this instruction manual  
This instruction manual basically explains operations as follows:  
To playback in random order [RANDOM]  
These symbols  
indicate the types of  
discs which the  
operation can be  
used for.  
You can play titles or tracks in random order by using  
the Random function.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
1
P3LAY  
STOP  
7
The number  
indicates the  
following procedural  
step(s) in which the  
button(s) is(are)  
used.  
3
2
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
7
While stopped  
You may also use the  
corresponding  
buttons on the front  
panel of the unit if  
available.  
The number  
indicates the  
procedural step.  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
Use CURSOR 2/3 to move  
to  
2
[RANDOM].  
REPEAT  
PROGRAM  
RANDOM  
The “RANDOM” indicator appears in the display  
window on the front panel.  
The names of  
buttons on the  
Press ENTER.  
The unit starts random playback.  
3
remote control unit  
(or on the front panel  
of the unit) are all  
given in uppercase  
letters.  
After playing all titles/tracks of the disc, random  
playback ends.  
Other convenient  
procedures, etc.  
The same title or track will not be played back more than once  
during random play.  
To stop/quit random playback in the middle  
Press STOP to stop playback. The unit is still in  
random playback mode, so pressing PLAY starts  
random playback again.  
To quit random playback, press STOP again while  
stopped. The “RANDOM” indicator in the display  
window turns off.  
NOTE  
Additional  
supplemental  
remarks  
Some DVD VIDEO discs may not be played back correctly  
in random mode.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001B  
Introduction  
Notes on handling  
Important cautions  
Safety precautions  
Installation of the unit  
Avoid moisture, water and dust  
• Select a place which is level, dry and neither too hot  
nor too cold (between 5˚C and 35˚C, 41˚F and 95˚F).  
• Leave sufficient distance between the unit and the TV.  
• Do not use the player in a place subject to vibrations.  
Do not place the unit in moist or dusty places.  
Avoid high temperatures  
Do not expose the unit to direct sunlight or place it  
near a heating device.  
Power cord  
• Do not handle the power cord with wet hands!  
• A small amount of power (3.0 watts) is always  
consumed while the power cord is connected to the  
wall outlet.  
When you’re away  
When away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet.  
• When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
Do not insert foreign objects into the unit  
Do not insert wires, hairpins, coins, etc. into the unit.  
To prevent malfunction of the unit  
Do not block the vents  
• There are no user-serviceable parts inside. If  
anything goes wrong, unplug the power cord and  
consult your dealer.  
• Do not insert any metallic object into the unit.  
• Do not use any non-standard shape disc available on  
the market, because it may damage the unit.  
• Do not use a disc with tape, seals, or paste on it,  
because damage to the unit may result.  
Blocking the vents may damage the unit.  
Care of the cabinet  
When cleaning the unit, use a soft cloth and follow the  
relevant instructions on the use of chemically-coated  
cloths. Do not use benzene, thinner or other organic  
solvents and disinfectants. These may cause  
deformation or discoloring.  
Note about copyright laws  
If water gets inside the unit  
• Please check the copyright laws in your country  
before recording from DVD VIDEO, Audio CD, and  
Video CD discs. Recording of copyrighted material  
may infringe copyright laws.  
Turn off the power switch and remove the plug from  
the wall outlet, then call the store where you made  
your purchase. Using the unit in this state may cause a  
fire or electrical shock.  
Note about the copyguard system  
• The DVD VIDEO disc is protected by the copyguard  
system. When you connect the unit to your VCR  
directly, the copyguard system activates and the  
picture may not be played back correctly.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering  
or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby  
Laboratories.  
Confidential Unpublished Works.  
© 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents  
issues and pending. “DTS”and “DTS Digital Surround”, are trademarks of Digital Theater Systems, Inc.  
© 1996 Digital Theater Systems, Inc. All rights reserved.  
3
03 XV-521[J]-B  
3
00.4.19, 11:53 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Preliminary knowledge  
Names of parts and controls  
Refer to the corresponding pages indicated in () for details.  
Front panel  
(For XV-521BK/523GD/525BK)  
5 0 (OPEN/CLOSE) button  
6 7 (STOP) button  
7 # (PLAY) button  
1 POWER button  
2 STANDBY indicator  
3 Remote sensor  
4 Disc tray  
8 8 (PAUSE) button  
= SHUTTLE knob  
SHUTTLE  
OPEN/CLOSE  
DVD PLAYER  
1
¡
PLAY  
#
POWER  
STANDBY  
0
STOP  
7
PA8USE  
TITLE CHAP.  
RESUME THEATER  
3D PHONIC  
SKIP  
DOLBY  
EACH  
4
¢
D
I
G
I
T
A
L
DVD/VDEO CD/CD  
0 Display window  
- 4/¢ (SKIP) buttons  
9 3D PHONIC button  
(For XV-421BK)  
5 0 (OPEN/CLOSE) button  
6 7 (STOP) button  
1 POWER button  
2 STANDBY indicator  
3 Remote sensor  
7 # (PLAY) button  
4 Disc tray  
8 8 (PAUSE) button  
~ SEARCH buttton  
OPEN/CLOSE  
XV-421 DVD PLAYER  
PLAY  
#
SEARCH  
POWER  
STANDBY  
0
STOP  
7
PA8USE  
1
¡
TITLE CHAP.  
RESUME THEATER  
3D PHONIC  
SKIP  
EACH  
4
¢
DOLBY  
D
I
G
I
T
A
L
DVD/VDEO CD/CD  
9 3D PHONIC button 0 Display window  
- 4/¢ (SKIP) buttons  
1 POWER button (17)  
9 3D PHONIC button (32)  
Turns the unit on or off (standby).  
Produces a simulated surround effect.  
2 STANDBY indicator  
0 Display window  
Lights when the power cord is connected and the unit is  
on standby. When the unit is turned on, the STANDBY  
indicator goes off.  
Indicates the current status of the unit.  
- 4/¢ (SKIP) buttons (19, 21)  
Used to skip a chapter, title or track.  
3 Remote sensor  
Also, used for the page selection of a menu screen (for  
DVD VIDEO/Video CD).  
Receives the signal from the remote control unit.  
Holding down 4 or ¢ during playback reverses or  
4 Disc tray (17)  
advances playback rapidly.  
Used to load a disc.  
= SHUTTLE knob (19, 25) (for XV-521BK/XV-523GD/  
5 0 (OPEN/CLOSE) button (17)  
XV-525BK)  
Used to open and close the disc tray.  
Performs rapid advance/reverse playback operations.  
Also used for slow-motion playback of a picture (for DVD  
VIDEO/Video CD).  
6 7 (STOP) button (18)  
Stops playback.  
Also used to erase all programmed tracks for the program  
play.  
~ 1/¡ (SEARCH) button (19, 25) (XV-421BK only)  
Pressing 4 or ¢ during playback reverses or advances  
playback rapidly. Each press of the button during rapid  
playback increases the playback speed.  
7 # (PLAY) button (18)  
Starts playback. Also, used as a SELECT button for the PBC  
of Video CDs.  
Also used for slow-motion playback of a picture (for DVD  
VIDEO/Video CD).  
8 8 (PAUSE) button (18)  
Pauses playback.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Preliminary knowledge  
Remote control unit  
! Infrared signal-emitting window  
1 3D PHONIC button  
@ THEATER POSITION button  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
2 OPEN/CLOSE button  
# DVD POWER - TV POWER button  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
ZOOM  
3 SUBTITLE - DIGEST button  
4 AUDIO - STROBE button  
$ TV/VIDEO button  
% ANGLE - ZOOM button  
DIGEST  
STROBE  
1
2
3
TV 1  
TV 2  
TV 3  
4
5
6
TV 4  
TV 5  
TV 6  
5 Numeric buttons  
6 SLOW button  
7
8
9
TV 7  
TV 8  
TV 9  
10  
0
+10  
TV RETURN  
TV 0  
TV 100 +  
^ TV ch button  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
7 AMP VOL button  
8 SHIFT button  
& TV VOL button  
* RETURN - CHOICE button  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
9 PLAY MODE - CANCEL button  
4(B.SKIP) - B. SEARCH button  
( DISPLAY - TIME button  
P3LAY  
0
) ¢ (F.SKIP) - F. SEARCH button  
_ 3 (PLAY) button  
+ ENTER button  
¡ 7 (STOP) button  
MENU button  
STOP  
7
-
8(PAUSE) button  
= TITLE button  
UP  
LEFT CURSOR RIGHT  
DOWN  
~ CURSOR (5 UP, DOWN,  
LEFT, RIGHT) button  
2
3
REMOTE CONTROL  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Preliminary knowledge  
1 3D PHONIC button (32)  
! Infrared signal-emitting window  
Produces a simulated surround effect.  
Point this window toward the remote sensor on the front  
panel when pressing buttons.  
2 OPEN/CLOSE button (17)  
@ THEATER POSITION button (32)  
Opens and closes the disc tray.  
Selects a picture character from 4 options (for DVD VIDEO/  
Video CD).  
3 SUBTITLE - DIGEST button (23, 31)  
Used to display the subtitle selection display on the TV  
screen, as well as used to turn the subtitle on or off (for  
DVD VIDEO).  
Pressing this button while holding down the SHIFT button  
displays beginning scenes of each title, chapter or track on  
the TV screen (for DVD VIDEO/Video CD).  
# DVD POWER - TV POWER button (17)  
Turns the unit on or off (standby). Pressing this button while  
holding down the SHIFT button turns the TV on or off.  
$ TV/VIDEO button (16)  
Switches the TV input mode.  
4 AUDIO - STROBE button (24, 31)  
% ANGLE - ZOOM button (26, 30)  
Selects the audio (for DVD VIDEO/Video CD). Pressing this  
button while holding down the SHIFT button displays nine  
continuous still pictures (for DVD VIDEO/Video CD).  
Changes camera angles during playback of a DVD VIDEO  
disc containing multiple camera angles. Pressing this  
button while holding down the SHIFT button zooms in the  
picture (for DVD VIDEO/Video CD).  
5 Numeric buttons (10, 16)  
Used to select a title or track number, as well as used to  
enter a time for the Time search and a chapter number for  
the Chapter search.  
^ TV ch button (16)  
Changes the TV channels.  
Also used to select a TV channel in conjunction with the  
SHIFT button.  
& TV VOL button (16)  
Adjusts the TV volume.  
6 SLOW button (25)  
* RETURN - CHOICE button (20, 35)  
Used for slow-motion playback of a picture (for DVD VIDEO/  
Video CD).  
Returns to the previous menu (for DVD VIDEO/Video CD).  
Pressing this button while holding down the SHIFT button  
displays Preference on-screen display on the TV screen.  
7 AMP VOL button (16)  
Used to control the volume of a JVC audio amplifier/  
( DISPLAY - TIME button (33, 34)  
receiver.  
Displays the status information (only for DVD disc) or the  
time information (for any disc types). When the time  
information appears, pressing this button while holding  
the SHIFT button changes the time mode.  
8 SHIFT button  
Used together with other buttons for activating their second  
functions.  
) ¢ (F.SKIP) - F. SEARCH button (19, 21, 23)  
9 PLAY MODE - CANCEL button (27)  
Skips forward a chapter, title or track. Also used for the  
page selection of a menu screen (for DVD VIDEO/Video CD).  
Holding down this button during playback advances  
playback rapidly.  
Displays an on-screen display for controlling the advanced  
playback functions. Pressing this button while holding  
down the SHIFT button cancels the last selection of the  
program.  
Pressing the button while holding down the SHIFT button  
during playback also advances playback rapidly. If you  
press the button while holding down the SHIFT button  
during rapid advance playback, the speed increases.  
0 4 (B.SKIP) - B. SEARCH button (19, 21, 23)  
Skips back a chapter, title or track. Also used for the page  
selection of a menu screen (for DVD VIDEO/Video CD).  
Holding down this button during playback reverses  
playback rapidly.  
_ 3 (PLAY) button (18)  
Starts playback. Also used as a SELECT button for PBC of  
Video CDs.  
Pressing the button while holding down the SHIFT button  
during playback also reverses playback rapidly. If you press  
the button while holding down the SHIFT button during  
rapid reverse playback, the speed increases.  
+ ENTER button  
Executes the selected item in a menu or on-screen display.  
- 8 (PAUSE) button (18)  
¡ 7 (STOP) button (18)  
Pauses playback.  
Stops playback.  
Also used to erase all the programmed tracks for the  
program play.  
= TITLE button (20)  
Displays the title menu of a DVD VIDEO disc on the TV  
screen.  
MENU button (20)  
Displays a DVD menu on the TV screen.  
~ CURSOR (5 UP, DOWN,  
2
LEFT,  
3
RIGHT) buttons  
Used to select an item form a menu or on-screen display,  
or to change the setting of an item in the on-screen display.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Preliminary knowledge  
Display window  
3 Disc indicator  
4 Function indicator  
1 Title/chapter/track indicator  
Displays title/chapter, or track number.  
2 Time display  
3D-PHONIC  
PROGRAM RANDOM REPEAT 1A-B  
RESUME THEATER  
DVD VCD  
Shows the cumulative or remaining time of the track or  
disc, or the total disc time.  
TITLE CHAP.  
TRACK  
EACH  
REMAIN  
3 Disc indicator  
Indicates the type of the disc set in the tray. When a DVD  
VIDEO or Video CD disc is set, “DVD” or “VCD” is indicated.  
When an Audio CD is set, there is no indication.  
2 Time display  
4 Function indicator  
1 Title/chapter/track indicator  
Activated function indicators light up.  
Rear panel  
(For XV-521BK/523GD/525BK)  
6 DIGITAL OUT jacks (OPTICAL/COAXIAL)  
7 COMPONENT VIDEO OUT jacks (Y/PB/PR)  
DIGITAL OUT  
PCM/STREAM  
COAXIAL  
VIDEO OUT  
COMPONENT  
AC IN  
1
AV COMPU LINK  
Y
P
B
PR  
OPTICAL  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
3 AUDIO OUT jacks  
(LEFT/RIGHT)  
4 AV COMPU LINK jacks  
5
AC IN connector  
2 VIDEO OUT jack  
1 S-VIDEO OUT jack  
(For XV-421BK)  
6 DIGITAL OUT jack (COAXIAL)  
7 COMPONENT VIDEO OUT jacks (Y/PB/PR)  
DIGITAL OUT  
PCM/STREAM  
VIDEO OUT  
COMPONENT  
AC IN  
1
COAXIAL  
Y
PB  
PR  
VIDEO OUT  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
3 AUDIO OUT jacks (LEFT/RIGHT)  
5
AC IN connector  
2 VIDEO OUT jack  
1 S-VIDEO OUT jack  
1 S-VIDEO OUT jack (12)  
5
AC IN connector (14)  
Connects to the wall outlet using the supplied AC power  
cord.  
Outputs an S-video signal.  
2 VIDEO OUT jack (12)  
6 DIGITAL OUT jacks (14)  
Outputs a composite video signal.  
Output digital audio signals. You must select the signal type  
correctly according to the external device connected to via  
the Preference display. The XV-521BK/523GD/525BK  
provides both the OPTICAL and COAXIAL connectors, while  
XV-421BK provides only the COAXIAL connector.  
3 AUDIO OUT jacks (L/R) (12)  
Output stereo analog audio signals.  
4 AV COMPU LINK jacks (41) (except XV-421BK)  
Connect with other JVC equipment supporting the AV  
Compulink function to facilitate integrated operations.  
7 COMPONENT VIDEO OUT jacks (Y/PB/PR) (13)  
Output component video signals.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-M555BK [J] EN  
LVT0391-001A  
Preliminary knowledge  
Operational Principles  
On-screen displays  
The unit provides several on-screen displays.  
With some displays, you can set or select preferences  
or functions, while the others are display-only.  
Opening displays  
Opening display  
The Opening display appears automatically in some  
conditions.  
At the bottom, the following information are indicated  
depending on the unit’s status.  
NOW READING: The unit is now reading the disc  
information (TOC).  
REGION CODE ERROR!: The DVD VIDEO disc loaded  
cannot be played because the region code of the  
disc does not match the unit.  
NOW READING  
OPEN: The disc tray is now opening.  
CLOSE: The disc tray is now closing.  
Preference displays  
LANGUAGE  
AUDIO  
When the unit is stopped, pressing the RETURN-  
CHOICE button while holding the SHIFT button  
accesses the preference display for setting the  
preferences.  
There are four pages: LANGUAGE, AUDIO, DISPLAY  
and SYSTEM as shown in the right.  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
DOLBY  
ENGLISH  
DIGITAL /PCM  
Lo / Ro  
ON  
MENU ANGUAGE  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
ENGLISH  
ENGLISH  
ENGLISH  
AUDIO LANGUAGE  
SUBTITLE  
COMPRESSION  
ON SCREEN LANGUAGE  
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
See page 35 for detailed information.  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
4:3 LB  
OFF  
ON  
OFF  
OFF  
MONITOR TYPE  
AUTO STANDBY  
RESUME  
SCREEN SAVER  
DVD 1  
ON SCREEN GUIDE  
AV COMPULINK MODE  
*
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
* The “AV COMPULINK  
MODE” selection is not  
available with the XV-  
421BK.  
PARENTAL LOCK displays  
PARENTAL LOCK  
When no disc is inserted or a DVD VIDEO disc is  
stopped, pressing the ENTER button while holding  
down the SHIFT button accesses the PARENTAL LOCK  
display in which you can set the level for limiting  
playback.  
PARENTAL LOCK  
US  
Country Code  
Set Level  
----  
PASS WORD  
EXIT  
See page 39 for detailed information.  
PRESS  
KEY  
ENTER  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-M555BK [J] EN  
LVT0391-001A  
Preliminary knowledge  
Play mode displays  
While stopped  
During DVD VIDEO playback  
Pressing the PLAY MODE button accesses the play  
mode display in which you can control playback  
functions.  
DVD CONTROL  
REPEAT  
PROGRAM  
RANDOM  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
Different displays appear depending on the disc type  
and the unit’s status.  
During Audio CD playback  
During Video CD playback  
CD CONTROL  
VCD CONTROL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
Status displays  
DVD VIDEO function status  
Disc/time (DVD VIDEO )  
Pressing the DISPLAY-TIME button during playback  
accesses the status display.  
For a DVD VIDEO disc, pressing the DISPLAY-TIME  
button toggles between the DVD VIDEO function status  
display, and the disc/time display and off.  
1 / 2  
1 / 2  
1 / 2  
Mbps  
TITLE  
1
CHAP.  
25  
TIME  
2:25:25  
BITRATE  
3.3  
ENGLISH ENGLISH  
For a Video CD or Audio CD disc, pressing the DISPLAY-  
TIME button switches the disc/time display on and off.  
Disc/time (Audio CD/Video CD Disc/time  
without PBC)  
(Video CD with PBC)  
EACH  
REMAIN  
TRACK 1TIME 00:08  
TRACK  
1
TIME  
25:25 PBC  
To prevent the monitor from burning out [SCREEN SAVER]  
A television monitor screen may be burned out if a  
static picture is displayed for a long time. To prevent  
this, the unit automatically activates the screen saver  
function if a static picture, such as an on-screen display  
or menu, is displayed for over 5 minutes.  
DVD/Video CD/CD PLAYER  
Pressing any button on the unit or the remote  
control unit will release the screen saver function  
and return to the previous display.  
You can select one of several screen saver modes  
available (see page 37).  
The screen saver function is not activated during  
Audio CD playback or after stopping Audio CD  
playback.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-M555BK [J] EN  
LVT0391-001A  
Preliminary knowledge  
On-screen guide icons  
During DVD playback, you may see icons displayed over the picture. These  
have the following meanings.  
: Displayed at the beginning of a scene recorded from multiple angles. (See  
page 30.)  
: Displayed at the beginning of a scene recorded with multiple audio  
languages. (See page 31.)  
: Displayed at the beginning of a scene recorded with multiple subtitle  
languages. (See page 31.)  
You can set the unit not to display on-screen icons above via the preference  
settings described on page 38.  
About invalid operation icon  
When you press a button, if the unit does not accept its operation,  
appears  
on your television screen. Operations are occasionally unacceptable even if  
is not displayed.  
Note that some operations may not be accepted. For example, some discs  
may not allow rapid advance/reverse or slow-motion playback.  
How to use numeric buttons  
To select a track/title number  
To select a number between 1 and 10  
1
2
3
TV 1  
TV 2  
TV 3  
Press the corresponding button for the number.  
4
5
6
TV 4  
TV 5  
TV 6  
To select a number higher than 10  
7
8
9
Use the +10 button.  
TV 7  
TV 8  
TV 9  
10  
0
+10  
Examples:  
TV RETURN  
TV 0  
TV 100+  
To select 13  
To select 34  
To select 40  
+10 3  
+10 +10 +10 4  
+10 +10 +10 10  
To enter a time or chapter number  
The method for entering a time for Time search or chapter number for Chapter  
search is different from above. See the corresponding sections in this manual  
for the details.  
To select a TV channel.  
Press the corresponding numeric buttons (between 0 and 9) while holding  
down the SHIFT button.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-M555BK [J] EN  
LVT0391-001A  
Preliminary knowledge  
About discs  
Playable disc types  
Playable and non-playable disc types are as follows:  
Playable discs  
DVD VIDEO  
Video CD  
Audio CD  
CD-R  
CD-RW  
The DVD VIDEO Logo is a trademark.  
• CD-R and CD-RW discs recorded with the audio CD format can be played back, though some may not be played  
back because of the disc characteristics or recording condition.  
• DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This unit only can play back DVD  
VIDEO discs whose Region Code numbers include “1”.  
Examples of playable DVD VIDEO discs:  
1 2  
3 4  
ALL  
1 2  
1
This unit accommodates the NTSC television system and can playback discs recorded with the NTSC system. Note  
that the unit cannot playback discs recorded with the PAL system.  
Non-playable discs  
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT  
• Playing back discs listed as “Non-playable discs” above may generate noise and damage speakers.  
• This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.  
Disc structure  
A DVD VIDEO disc is comprised of “titles,” while an Audio CD, Video CD is comprised of “tracks.” Each title may be  
divided into some “chapters.” For example, if a DVD VIDEO disc contains some movies, each movie may have its own  
title number, and each movie may be divided into some chapters. In a DVD VIDEO karaoke disc, each song usually has  
its own title number and does not have chapters. In general, each title has independent content, while each chapter in  
the same title has continuity.  
(Example: DVD VIDEO disc)  
Title 1  
Title 2  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1  
Chapter 2  
(Example: Audio CD/Video CD)  
Track 1 Track 2  
Track 3  
Track 4  
11  
EN04-11.XV-521BK[J]  
11  
00.3.27, 10:39 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Getting started  
Connections  
*In the following description, “TV” may be substituted with “monitor” or “projector.”  
*Before using the unit, you have to connect the unit to a TV and/or amplifier.  
*In the following connection examples, the rear panel drawing of the unit is based on XV-521BK/523GD/525BK. The  
XV-421BK rear panel looks different.  
Before making any connections  
• Do not connect the AC power cord until all other connections have been made.  
• Since different components often have different terminal names, carefully read the instructions supplied with the  
component you are going to connect.  
To connect to a TV  
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio  
outputs to your separate audio equipment. (See the following pages.)  
* If the TV has an AV COMPU LINK terminal,  
you can use the AV COMPU LINK function  
(except XV-421BK).  
See “AV COMPU LINK remote control  
system” on page 41 for details.  
The unit  
DIGITAL OUT  
PCM/STREAM  
COAXIAL  
VIDEO OUT  
COMPONENT  
S-video cable  
(supplied)  
AV COMPU LINK  
Y
P
B
PR  
OPTICAL  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
TV  
IN  
Yellow  
White  
S-VIDEO  
VIDEO  
LEFT  
Yellow  
White  
Red  
AUDIO  
RIGHT  
Red  
Audio/video cable  
(supplied)  
: except XV-421BK  
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video  
cables.  
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts  
stereo audio output to monaural.  
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-  
video cable in addition to the (standard) video connection to get better picture quality.  
NOTES  
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may  
cause a monitor problem when playing back a copy-protected disc.  
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Getting started  
To connect to a TV with the component video input jacks  
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT  
VIDEO IN jacks of your TV with the video cables.  
Green  
Blue  
Component video  
cable (not supplied)  
Red  
The unit  
DIGITAL OUT  
PCM/STREAM  
COAXIAL  
VIDEO OUT  
COMPONENT  
PB  
S-video cable  
(supplied)  
Blue  
Red  
AV COMPU LINK  
Y
PR  
OPTICAL  
Green  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
TV  
IN  
Red  
White  
Y
P
B
PR  
S-VIDEO  
VIDEO  
White  
Red  
IN  
LEFT  
AUDIO  
RIGHT  
: except XV-421BK  
Audio cable  
(not supplied)  
• Connect “Y” to “Y,” “PB” to ”PB,” and “PR” to “PR” correctly.  
NOTES  
• When the component video input jacks of the TV are of the BNC type, use an adapter to convert the pin jacks to BNC jacks  
(optional).  
• If you do not connect the unit with the S-video cable, some functions of your TV may not work.  
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.  
To connect to an audio amplifier or receiver  
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.  
The unit  
: except XV-421BK  
DIGITAL OUT  
PCM/STREAM  
COAXIAL  
VIDEO OUT  
COMPONENT  
PB  
AV COMPU LINK  
Y
PR  
OPTICAL  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
Amplifier or receiver  
Red  
White  
IN  
White  
Red  
LEFT  
AUDIO  
RIGHT  
Audio cable  
(not supplied)  
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or  
receiver.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Getting started  
To connect to audio equipment with a digital input  
You can enhance the sound quality by connecting the unit’s DIGITAL OUT to the digital input of an amplifier, DAT or  
MD by using an optional digital cable (the XV-521BK/523GD/525BK provides both the optical and coaxial jacks while  
the XV-421BK only provides the coaxial jack). The digital audio signal from a disc is directly transferred. If you  
connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital  
cable, you can enjoy high-quality surround sound.  
When you make the digital connection, also make the analog connection, because, depending on the disc type, no  
audio may be reproduced from the DIGITAL OUT.  
For XV-521BK/523GD/525BK  
When using the DIGITAL OUT (OPTICAL) jack, remove  
the protection cap. Do not lose the removed cap.  
When the DIGITAL OUT (OPTICAL) jack is not used, fix  
the protection cap into the jack.  
Optical digital cable  
(not supplied)  
Coaxial digital cable  
(not supplied)  
The unit  
: except XV-421BK  
DIGITAL OUT  
PCM/STREAM  
COAXIAL  
VIDEO OUT  
COMPONENT  
PB  
AV COMPU LINK  
Y
PR  
OPTICAL  
Digital equipment  
R
L
S-VIDEO VIDEO  
AUDIO OUT  
IN  
IN  
White  
Red  
OPTICAL  
LEFT  
AUDIO  
DIGITAL  
Red  
White  
RIGHT  
COAXIAL  
Audio cable  
(not supplied)  
NOTES  
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”  
setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL  
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See  
“DIGITAL AUDIO OUTPUT” on page 36.  
• With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display  
are invalid. Settings for these items must be made from the decoder.  
To connect the power cord  
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the  
unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The  
STANDBY indicator lights and setup is completed.  
Warning  
• Disconnect the power cord if you are not going to use the unit for a long time.  
• Disconnect the power cord before cleaning the unit.  
• Disconnect the power cord before moving the unit.  
• Do not connect or disconnect the power cord with wet hands.  
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or  
other accidents.  
Caution  
• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.  
To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If  
the cord is damaged, contact a dealer and get the new power cord.  
• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Getting started  
Using the remote control unit  
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV.  
To install batteries in the remote control unit  
The battery compartment is located on the back of the remote control unit.  
1 Press down on the point shown by the arrow at the top of the compartment cover,  
and pull up the cover to open the compartment.  
2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control  
according to the polarity markings (“+” and “–”) inside the compartment and on the  
batteries.  
3 Place the cover over the compartment, and press down lightly.  
The batteries will last about six months with normal use. If the functions of the remote control become erratic,  
replace the batteries. See below for more information.  
Precautions for the safe use of batteries  
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened,  
they may burst or their contents may leak.  
Precaution  
• Remove the batteries from the remote control if it is not going to be used for a long period of time.  
• Remove dead batteries and dispose of them properly.  
• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.  
• Never touch liquid that has leaked out of a battery.  
• Do not mix new and old batteries, or batteries of different types, when replacing them.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Getting started  
To use the remote control unit for TV operation  
You can operate your TV from the remote control unit.  
Setting the remote control signal for operating your TV.  
1 Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9).  
Do not release TV/VIDEO. Keep holding it until the next step is completed.  
Manufacturer code list  
Example:  
No. Manufacturer  
No. Manufacturer  
To enter the manufacturer code “01”:  
Press “0” then “1.”  
01  
02  
03  
04  
05  
06  
07  
08  
09  
JVC  
10  
11  
12  
13  
14  
15  
HITACHI  
MAGNAVOX  
MITSUBISHI  
PANASONIC  
RCA  
PANASONIC  
SAMSUNG  
SANYO  
SANYO  
SHARP  
SAMSUNG  
SONY  
TOSHIBA  
ZENITH  
2 Press 7 (STOP) while holding down TV/VIDEO.  
The following buttons can be used for operating the TV:  
TV POWER  
DVD POWER  
Turns the TV on or off.  
SHIFT  
TV  
ch  
Changes the TV channels.  
TV  
VOL  
Adjusts the TV volume.  
Selects the TV channels.  
SHIFT  
*For some TVs, pressing “+10” while holding down SHIFT  
functions as the “100+.” “+10” functions as the ENTER button if  
your TV requires pressing the ENTER button after selecting a  
channel number.  
9
1
to  
TV 1  
TV 9  
0
+10  
TV 0  
TV 100+  
Returns to the previously selected channel (only valid for JVC  
TVs).  
10  
TV RETURN  
SHIFT  
TV/VIDEO  
Switches input mode (either TV or VIDEO).  
3 Try to operate your TV by pressing DVD POWER - TV POWER while holding SHIFT.  
If your TV turns on or off, you have successfully set the control signal.  
NOTES  
• The remote control unit is initially set for operating a JVC TV.  
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.  
To control the volume of a JVC’s amplifier or receiver  
You can control the volume of a JVC’s amplifier or receiver by using the AMP VOL button on the remote control unit.  
AMP  
VOL  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Basic operations  
In the following description, the buttons on the remote control unit are mainly used, however, you may use the  
corresponding buttons on the front panel of the unit if available.  
Turning on/off the unit  
Press POWER on the front panel or press DVD POWER - TV POWER on the remote control unit.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
DVD POWER  
TV POWER  
OPEN/CLOSE  
DVD PLAYER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
POWER  
STANDBY  
0
POWER  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
TITLE CHAP.  
RESUME THEATER  
3D PHONIC  
7
8
9
EACH  
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
STOP  
7
You can turn on the unit by pressing the PLAY button on the front  
panel or the remote control unit. In this operation, the unit starts  
playback if the disc is set in the disc tray. If no disc is set, the disc  
tray opens.  
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
You can also turn on the unit by pressing the OPEN/CLOSE button on  
the front panel or the remote control unit. In this case, the disc tray  
opens.  
REMOTE CONTROL  
NOTE  
Even if you press the POWER or DVD POWER - TV POWER button to turn off the unit, the unit is not disconnected from the AC  
power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit is designed  
to consume a very small quantity of power.  
Inserting and removing discs  
Press OPEN/CLOSE to open the disc tray.  
1
Place the disc in the tray.  
2
With the label side up  
PLAY  
#
OPEN/CLOSE  
P
0
/
CD  
/
VDEO CD  
D  
¢
To insert an 8-cm disc, place it  
in the inner recess.  
DVD PLAYER  
STANDBY  
POWER  
3D PHONIC  
Press OPEN/CLOSE to close the disc tray.  
3
NOTES  
• The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable  
disc types, see page 11.  
• When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the  
tray is closed, and the disc may not be removed from the unit.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Basic operations  
Basic playback  
Now you can play a disc. First, let’s enjoy simple playback according to following procedure.  
To start playback  
TV POWER  
THEATER  
Press PLAY.  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
The unit starts playback from the beginning.  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
NOTES  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
• During playback, the display window shows the title/chapter or track number being played.  
SHIFT  
P3LAY  
• With Video CD discs with PBC control or some DVD discs, the menu display may appear  
on the TV screen after starting playback. In such a case, select an item to be played back  
from the menu.  
¢
4
Basic  
control  
buttons  
STOP  
7
8
UP  
For operation using a menu, see page 20.  
LEFT  
CURSOR RIGHT  
DOWN  
• With some DVD discs, the unit starts playback automatically after inserting the disc.  
REMOTE CONTROL  
To stop playback completely  
Press STOP.  
The unit stops playback.  
To stop playback temporarily  
Press PAUSE.  
The unit pauses playback. To continue playback, press PLAY.  
To advance or reverse playback rapidly while monitoring  
7 During playback  
From the remote control unit  
Hold down 4 or ¢.  
Holding down ¢ advances playback rapidly, while holding down 4 reverses playback at 5 times the normal  
speed.  
Releasing the button returns the unit to normal playback.  
or  
Press 4 or ¢ while holding down the SHIFT button.  
Each press of 4 or ¢ while holding down the SHIFT button increases the playback speed from 2x to 60x the  
normal speed.  
Pressing PLAY returns the unit to normal playback.  
From the front panel  
(For XV-521BK/523GD/525BK)  
SHUTTLE knob  
SHUTTLE  
OPEN/CLOSE  
Use the SHUTTLE knob.  
1
¡
PLAY  
#
0
STOP  
7
PA8USE  
To advance playback rapidly, turn the shuttle knob to the  
right and hold, and to reverse play rapidly, turn the shuttle  
knob to the left and hold. By releasing the shuttle knob, the  
unit returns to normal playback. The playback speed  
changes according to the amount you turn the shuttle knob.  
E
CHAP.  
RESUME THEATER  
SKIP  
EACH  
4
¢
DVD/VDEO CD/CD  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Basic operations  
1/¡ (SEARCH) button  
(For XV-421BK)  
OPEN/CLOSE  
Press 1 or ¡.  
PLAY  
#
SEARCH  
0
STOP  
7
PA8USE  
1
¡
Each press of 1 or ¡ increases the playback speed  
from 2x to 60x the normal speed.  
LE CHAP.  
RESUME THEATER  
SKIP  
EACH  
4
¢
Pressing PLAY returns the unit to normal playback.  
DVD/VDEO CD/CD  
Holding down the 4 or ¢ button on the front panel  
also advances or reverses playback rapidly.  
To locate the beginning of the scene or song  
7 During playback  
Press 4 or ¢.  
Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of  
the next chapter, title, or track.  
NOTE  
When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will  
generally locate the beginning of the title or chapter or track.  
To resume playback  
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position  
next time you press PLAY.  
To memorize the interrupted position  
Set the RESUME setting on the SYSTEM page of the preference display to ON.  
(See page 38 for details about how to set.)  
1
At the position you want to interrupt playback, press STOP, or press DVD POWER - TV POWER on the  
remote control or POWER on the front panel.  
2
The unit memorizes the interrupted position, while [RESUME] lights in the display window.  
If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared.  
To resume playback  
7 While the disc you interrupt playback last time is still in the disc tray.  
Press PLAY.  
The unit starts playback from the position where you interrupted playback last time.  
To clear the resume position memory  
Operate one of the followings:  
* Take out the disc from the tray  
* Press STOP while stopped  
* Turn on the unit by pressing DVD POWER - TV POWER (on the remote control) or POWER (on the front  
panel).  
NOTES  
• Do not press POWER (on the front panel) or DVD POWER - TV POWER (on the remote control) to turn on the unit if you want  
to resume playback, which will clear the resume position memory.  
• The resume function does not work with Audio CD discs.  
• The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF.  
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume  
point you stored.  
• The resume function does not work in the program or random mode.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
NOTES  
Playing from a specific  
position on a disc  
You can play a disc from the selected track, title or  
chapter, or from the specified time.  
• When  
step 1:  
The disc does not have a menu listing the titles.  
• When appears on the TV screen by pressing MENU  
in step 1:  
appears on the TV screen by pressing TITLE in  
The disc does not have a menu  
• The menu button does not work while stopped.  
To locate a desired scene from the DVD  
menu  
To locate a desired scene from the menu  
of the Video CD with PBC  
DVD VIDEO discs generally have their own menus  
which show the disc contents. These menus contain  
various items such as titles of a movie, names of  
songs, or artist information, and display them on the  
TV screen. You can locate a desired scene by using the  
menu.  
Some Video CD discs are compatible with the PBC  
function. PBC is an abbreviation of “PlayBack Control.”  
A Video CD disc recorded with PBC has its own menus,  
such as a list of the songs of the disc and items  
recorded on the disc. You can also locate a specific  
scene by using the menu.  
TV POWER  
OPEN  
THEATER  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
TV POWER  
THEATER  
7
TV  
8
TV  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
DIGEST  
STROBE  
ZOOM  
1
2
3
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
TV  
1
TV  
2
TV  
3
6
9
SHIFT  
4
5
6
TV  
TV  
4
TV  
5
TV  
P3LAY  
7
8
9
2
1
7
TV  
8
TV  
STOP  
7
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
1
MENU  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
UP  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
LEFT  
CURSOR RIGHT  
DOWN  
SHIFT  
2
P3L
STOP  
7
REMOTE CONTROL  
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
7 Whenever a DVD VIDEO disc is loaded  
REMOTE CONTROL  
Press MENU or TITLE.  
The menu appears on the TV screen.  
1
7 When a Video CD disc with PBC is stopped  
Press PLAY.  
1
Example:  
A disc menu  
appears on the TV  
screen (The PBC  
function is  
About menu  
Example  
Normally, a DVD VIDEO disc  
which contains more than one  
title may have a “title” menu  
which lists the titles. In this  
case, the menu appears on the  
TV screen by pressing the  
TITLE button. Some DVD  
VIDEO discs may also have a  
different menu which appears  
by pressing the MENU button.  
activated).  
“Pbc” is indicated in the display window on the  
front panel.  
See the instructions of each DVD VIDEO disc for its particular  
menu.  
Use the numeric buttons to select the desired  
number of the item.  
• See page 10 for details about how to use the  
numeric buttons.  
2
Use CURSOR 2/3/5/to select a desired  
2
item, then press ENTER.  
The unit starts playback of the selected item.  
Playback starts from the selected item.  
You can return to the menu by pressing RETURN -  
CHOICE.  
With some discs, you can also select items by entering the  
corresponding number using the numeric buttons, which may  
cause the unit to automatically start playback.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
When “NEXT” or “PREVIOUS” appears on the TV  
screen, the unit generally works as follows:  
NOTES  
• When  
appears on the TV screen.  
• Pressing ¢ advances to the next page.  
• Pressing 4 returns to the previous page.  
* The method of the operation is different  
depending on the disc.  
The title or track you have specified is not contained in  
the disc.  
• This function does not work during Video CD playback  
with PBC function  
To activate the PBC function when a PBC-compatible Video  
CD disc is being played back without the PBC function,  
press STOP then press PLAY.  
You can also activate the PBC function using the play mode  
menu display as follows.  
To locate a desired selection using 4  
or ¢  
1. Press PLAY MODE - CANCEL.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
2. Use the CURSOR 2/3 to move  
to [PBC CALL], then  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
press ENTER.  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
• If you want to playback a PBC-compatible Video CD disc  
without activating the PBC function, start playback by using  
the numeric buttons instead of the PLAY button. See the  
next paragraph.  
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
1
P3LAY  
STOP  
7
To locate a desired selection using the  
numeric buttons  
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
REMOTE CONTROL  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
1
7
TV  
8
TV  
7 For DVD VIDEO: During playback  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
For Audio CD: During playback  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
For Video CD:  
During playback without PBC  
function  
SHIFT  
P3LAY  
STOP  
7
Press 4 or ¢.  
1
MENU  
UP  
With an Audio CD or Video CD, pressing the  
button skips a track. With a DVD VIDEO disc,  
pressing the button skips a chapter or title  
depending on the disc configuration.  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
The selection number appears in the display  
window on the front panel.  
You can play a desired title (DVD VIDEO) or track  
(Audio CD/Video CD) by specifying the number.  
To locate a subsequent selection, press ¢ once  
or repeatedly until the desired selection number  
appears in the display.  
To locate to beginning of the current selection,  
press 4 once.  
To locate a former selection, press 4 repeatedly  
until the desired selection number appears in the  
display.  
7 For DVD VIDEO: While stopped  
For Audio CD: Whenever an Audio CD disc is  
loaded  
For Video CD:  
During playback without PBC  
function or while stopped  
Use the numeric buttons to specify the desired  
title or track number.  
1
NOTES  
The unit starts playback from the selected title or  
track.  
• This function may not work with some DVD VIDEO discs.  
• This function does not work during Video CD playback  
with PBC function  
• See page 10 for details about how to use the  
numeric buttons.  
The selected title or track number appears in the  
display window on the front panel.  
Display window  
TITLE  
TRACK  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
NOTES  
To locate a desired scene by specifying  
the chapter number [CHAP. SEARCH]  
• When the chapter number is incorrect in step 3:  
Overwrite the incorrect number with the correct number.  
• When  
is displayed in the TV screen in step 4:  
The chapter you have selected is not contained in the  
disc, or chapter search does not work on the disc.  
If the current title of a DVD VIDEO disc being played is  
divided into chapters, you can skip to a desired chapter  
by specifying the chapter number using the on-screen  
display.  
• With some discs, the unit automatically starts searching  
for the chapter after entering the chapter number in step  
3.  
• To turn off the play mode menu:  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
Press PLAY MODE.  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
3
7
TV  
8
TV  
10  
0
+10  
To locate a desired position in the  
current title or track [TIME SEARCH]  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
1
P3LAY  
4
2
STOP  
7
MENU  
You can play a disc from the desired position by  
specifying the elapsed time from the beginning of the  
current title or track using the TIME SEARCH function.  
Note that some DVD VIDEO discs do not contain time  
information, and the TIME SEARCH function cannot be  
used.  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
7 During DVD VIDEO playback  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
Press PLAY MODE - CANCEL.  
The DVD play mode menu appears on the TV  
1
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
3
7
TV  
8
TV  
10  
0
+10  
screen.  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
Use CURSOR 2/3 to move  
to [CHAP.  
2
P3LAY  
1
SEARCH], then press ENTER.  
STOP  
7
4
2
MENU  
“GO TO CHAPTER = ”  
DVD CONTROL  
UP  
appears under the  
menu.  
LEFT  
CURSOR RIGHT  
DOWN  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
GO TO CHAPTER =  
REMOTE CONTROL  
7 For DVD VIDEO: During playback  
Use the numeric buttons (0 ~ 9) to enter the  
desired chapter number.  
Example:  
3
4
For Audio CD: During playback  
For Video CD:  
During playback without PBC  
function  
To select chapter number 8:  
Press “8” ENTER.  
To select chapter number 37:  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
2
Press “3” “7” ENTER.  
Use CURSOR 2/3 to move  
SEARCH], then press ENTER.  
“GO TO” appears under the menu.  
to [TIME  
Press ENTER.  
The unit starts playback from the selected chapter.  
Use the numeric buttons (0 ~ 9) to enter the  
time.  
3
The “10” and “+10” buttons are not used in this function.  
You can specify the elapsed time of the current  
title or track to set the location which you want to  
playback from.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
Press ENTER.  
The unit starts playback from the specified time.  
4
To locate a desired scene from the  
digest display [DIGEST]  
(for DVD VIDEO)  
(for Audio CD)  
DVD CONTROL  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
REPEAT A-B REPEAT TIME SEARCH  
The unit can display the opening scene of each title or  
chapter on a DVD VIDEO or each track of a Video CD.  
You can select a desired scene from those displayed on  
the TV screen.  
GO TO 2 : 3 4 : 0 0  
GO TO 0 2 : 3 4  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
Selected time  
Selected time  
DIGEST  
STROBE  
ZOOM  
1
2
1
2
3
TV  
1
TV  
2
TV  
3
6
9
(for Video CD)  
4
5
6
TV  
TV  
4
TV  
5
TV  
VCD CONTROL  
7
8
9
7
TV  
8
TV  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
10  
0
+10  
• “10” and “+10” buttons are  
not used in this function.  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
TV  
ch  
SLOW  
VOL  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
GO TO 0 2 : 3 4  
You can specify the time in  
hour/minute/second format  
for DVD VIDEO discs, and  
in minute/second format  
for Audio and Video CD  
discs.  
SHIFT  
P3LAY  
STOP  
7
3
MENU  
UP  
Selected time  
LEFT  
CURSOR RIGHT  
DOWN  
Example (for DVD VIDEO):  
REMOTE CONTROL  
To playback from 2(H):34(M):00(S)  
GO TO _ : _ _ : _ _  
7 For DVD VIDEO: While stopped or during playback  
Press “2”.  
For Video CD:  
While stopped or during playback  
without PBC function.  
GO TO 2 : _ _ : _ _  
Press “3”.  
Press SUBTITLE - DIGEST while holding  
down SHIFT.  
1
GO TO 2 : 3 _ : _ _  
Up to nine opening scenes are displayed.  
Press “4”.  
• While a DVD VIDEO disc is stopped:  
The opening scene of each title appears on the  
TV screen.  
• During DVD VIDEO disc playback:  
The opening scene of each chapter in the current  
title appears on the TV screen.  
• When a Video CD disc is loaded:  
The opening scene of each track appears on the  
TV screen .  
GO TO 2 : 3 4 : _ _  
Press ENTER.  
You do not have to press “0” to enter the trailing zeros  
(for the last two digits in the example above). Of  
course, it is possible to enter them.  
• When you make a mistake  
Move the cursor to the incorrect value, then press the  
correct button to re-select the value.  
GO TO 2 : 3 5 : _ _  
Press CURSOR 2.  
GO TO 2 : 3 _ : _ _  
Press “4”.  
Use CURSOR 2/3/5/to select the desired  
2
GO TO 2 : 3 4 : _ _  
scene.  
The selected scene is indicated by  
.
NOTES  
If there are more than 9 scenes, the digest screen  
will have more than one page. In this case,  
pressing ¢ advances to the next page, while  
pressing 4 returns to the previous page.  
• When  
appears on the TV screen in step 2:  
The time you have selected is not contained on the disc,  
or the time search function does not work on the disc.  
Also note that the time search function does not work  
during Video CD playback with the PBC function.  
• To turn off the play mode menu:  
Press PLAY MODE.  
• The TIME SEARCH function cannot be used during  
program playback.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
Special picture playback  
The unit provides special picture playback functions  
including Frame-by-frame, Strobe, Slow-motion and  
Zoom.  
Selected scene  
To advance a still picture frame-by-frame  
PLAY MODE DISPLAY RETURN  
CANCEL  
TIME  
CHOICE  
SHIFT  
• When the lower right scene is selected, pressing CURSOR 3  
advances to the next page if available. Similarly, when the  
upper left scene is selected, pressing CURSOR 2 returns to  
the previous page (if available).  
• When there are more than one digest page, after pressing  
SUBTITLE - DIGEST while holding down SHIFT, pressing  
¢ before all 9 scenes of the first page appear on the TV  
screen will advance to the next page. Similarly, pressing  
4 before all the scenes of the second or latter page  
appear on the TV screen will return to the previous page.  
P3LAY  
¢
4
STOP  
7
8
1
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
7 While paused (still)  
Press PAUSE.  
Each time you press PAUSE, the still picture  
advances to the next frame.  
Press ENTER.  
The unit starts playback from the selected title or  
track.  
1
3
Pressing PLAY returns to the normal playback  
mode.  
NOTE  
With some discs, depending on the contents, it may take  
some time until all the scenes appear on the screen.  
To display still pictures [STROBE]  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
2
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
STOP  
7
1
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
7 During playback  
At the point you want to view as continuous  
photographs, press PAUSE.  
1
The unit pauses playback.  
Press AUDIO - STROBE while holding down  
SHIFT.  
2
Nine continuous still  
pictures appear on  
the TV screen.  
• Pressing PAUSE when the nine still pictures appear will  
advance to the next nine still pictures.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
To cancel strobe play  
Press AUDIO - STROBE while holding down SHIFT.  
From the front panel (for XV-421BK)  
OPEN/CLOSE  
PLAY  
#
SEARCH  
0
NOTES  
STOP  
7
PA8USE  
1
¡
• Pressing and holding PAUSE for more than 1 second also  
activates the Strobe function.  
CHAP.  
RESUME THEATER  
SKIP  
EACH  
4
¢
1
DVD/VDEO CD/CD  
• If you press AUDIO - STROBE while holding down SHIFT  
during playback, nine still pictures also appear but they  
advance in realtime.  
Press PAUSE then use 1/¡.  
1
To play forward slow-motion, press ¡, and to  
play reverse slow-motion (for DVD VIDEO discs  
only), press 1. First, the unit plays the slowest  
speed, and each time you press the button, the  
playback speed increases.  
To playback in slow-motion [SLOW]  
7 During playback  
From the remote control unit  
• To return to normal playback  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
Press PLAY.  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
• To pause slow-motion playback  
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
Press PAUSE.  
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
TV  
ch  
SLW  
VOL  
1
NOTES  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
• The sound is muted during slow-motion playback.  
STOP  
7
• Reverse slow-motion playback is not possible for a Video  
CD.  
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
Press SLOW.  
1
To play forward slow-motion, press SLOW “+“,  
and to play reverse slow-motion (for DVD VIDEO  
discs only), press SLOW “–“. First, the unit plays  
the slowest speed, and each time you press the  
button, the playback speed increases.  
From the front panel (for XV-521BK/523GD/  
525BK)  
SHUTTLE  
OPEN/CLOSE  
1
¡
PLAY  
#
0
STOP  
7
PA8USE  
CHAP.  
RESUME THEATER  
SKIP  
EACH  
4
¢
1
DVD/VDEO CD/CD  
Press PAUSE, then use the SHUTTLE knob.  
1
To play forward slow-motion, turn the SHUTTLE  
knob to the right. To play reverse slow-motion (for  
DVD VIDEO discs only), turn it to the left. The  
more you turn the knob, the more the slow-  
motion speed increases.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
To zoom a scene [ZOOM]  
Changing the playback order  
You can play titles or tracks in the desired order or in  
random order.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
To playback in the desired order  
[PROGRAM]  
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
1
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
You can play titles or tracks in the desired order by  
using the Program function.  
STOP  
7
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
2
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
REMOTE CONTROL  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
3
4
7
TV  
8
TV  
7 During playback or while paused  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
Press ANGLE - ZOOM while holding down  
SHIFT.  
1
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
1
P3LAY  
STOP  
7
“ZOOM” appears on the TV screen.  
MENU  
The unit zooms in to the center part of the scene  
to produce a double-sized image.  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
2
REMOTE CONTROL  
7 While stopped  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
ZOOM  
Use CURSOR 2/3 to move  
to  
2
[PROGRAM] and press ENTER.  
REPEAT  
PROGRAM  
RANDOM  
1
7
2
8
3
9
4
5
6
10  
16  
11  
17  
12  
18  
13  
14  
15  
Use CURSOR 2/3/5/to move the  
2
zoomed-in scene.  
The program table appears under the menu bar  
(as shown above).  
ZOOM  
The “PROGRAM” indicator appears in the display  
window on the front panel.  
Select the titles or tracks in the desired order  
using the numeric buttons.  
See page 10 for details about how to use the  
numeric buttons.  
3
• To pause zoom play  
Press PAUSE.  
To resume zoom play, press PLAY.  
Up to 18 titles or tracks can be programmed. You  
may select the same title or track more than once.  
To return to normal playback  
Press ANGLE - ZOOM while holding down SHIFT.  
1
3
7
2
20  
8
3
1
9
4
5
6
15  
10  
11  
17  
12  
18  
13  
14  
15  
16  
NOTE  
During Zoom play, the picture may be garbled or noisy.  
The programmed title/track number is  
shown under each program number.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
• When you specify a wrong selection  
To playback in random order [RANDOM]  
Press PLAY MODE - CANCEL while holding down  
the SHIFT. The last selection programmed is  
erased.  
To clear the program  
Press STOP.  
You can play titles or tracks in random order by using  
the Random function.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
Press PLAY to start program play.  
When all of the programmed titles/tracks have  
finished playback, the unit stops but the program  
remains.  
4
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
TV  
ch  
SLOW  
VOL  
NOTES  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
• Some DVD VIDEO discs may not be played back correctly  
in program mode.  
1
P3LAY  
STOP  
7
• During program playback, pressing ¢ skip to the next  
selection of the program. Pressing 4 returns to the  
beginning of the current selection, however, you cannot  
skip back to the previous selection.  
3
2
MENU  
UP  
LEFT  
CURSOR RIGH
DOWN  
• By pressing PLAY MODE - CANCEL during program  
playback, the program table is displayed on the TV screen  
and the current program number is indicated in yellow.  
REMOTE CONTROL  
7 While stopped  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
• To quit program playback  
Press STOP and press STOP again.  
The “PROGRAM” indicator in the display window  
turns off and the program is cleared.  
Use CURSOR 2/3 to move  
to  
2
[RANDOM].  
REPEAT  
PROGRAM  
RANDOM  
While stopped and the play mode menu is displayed on the TV  
screen, by moving  
to [PROGRAM] and pressing ENTER, the  
program mode quits. Note that the program remains.  
The “RANDOM” indicator appears in the display  
window on the front panel.  
Press ENTER.  
The unit starts random playback.  
3
After playing all titles/tracks of the disc, random  
playback ends.  
The same title or track will not be played back more than once  
during random play.  
To stop/quit random playback in the middle  
Press STOP to stop playback. The unit is still in  
random playback mode, so pressing PLAY starts  
random playback again.  
To quit random playback, press STOP again while  
stopped. The “RANDOM” indicator in the display  
window turns off.  
NOTE  
Some DVD VIDEO discs may not be played back correctly  
in random mode.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
• For Audio/Video CD  
Repeat playback  
You can repeat playback of the current selection or all  
disc contents. You can also repeat playback of a desired  
part.  
(for Video CD)  
(for Audio CD)  
VCD CONTROL  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT ALL  
REPEAT ALL  
To repeat the current selection or all disc  
contents [REPEAT]  
Selected repeat mode  
Selected repeat mode  
REPEAT ALL (all track repeat)  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
REPEAT 1 (current track repeat)  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
No indication  
(off)  
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
To stop repeat playback  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
Press STOP.  
P3LAY  
1
STOP  
7
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
• If you press STOP in REPEAT ALL mode, the unit stops  
playback but remains in the mode.  
• If you press STOP in REPEAT1, TITLE REPEAT or CHAPTER  
REPEAT mode, the unit stops playback and quits the mode.  
2
REMOTE CONTROL  
To quit repeat playback  
7 In any condition except Video CD playback with PBC  
With  
pointed at [REPEAT], press ENTER  
repeatedly until the mode is set to off.  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
NOTES  
Use CURSOR 2/3 to move  
to [REPEAT],  
2
• Some DVD VIDEO discs do not allow the title repeat or/  
and chapter repeat.  
then press ENTER.  
• Some DVD VIDEO discs automatically stops playback in  
the middle of the disc.  
Each time you press ENTER, the repeat mode  
changes as follows:  
• Repeat playback function cannot be used during Video  
CD playback with PBC function.  
• For DVD VIDEO  
• To turn off the play mode menu display  
Press PLAY MODE - CANCEL.  
DVD CONTROL  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
REPEAT ALL  
The selected repeat mode appears  
on the TV screen.  
REPEAT ALL (all title repeat)  
* REPEAT TITLE (current title repeat)  
* REPEAT CHAPTER (current chapter repeat)  
No indication (off)  
* While stopped, you cannot select REPEAT TITLE or  
REPEAT CHAPTER.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
• To quit A-B repeat playback  
Press STOP. The unit stops playback and quits the A-  
B repeat mode.  
To repeat a desired part [A-B REPEAT]  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
• During playback, pressing ENTER when  
B REPEAT] quits the A-B repeat mode and continues  
playback.  
You can also quit the A-B repeat mode by pressing 4 or  
¢.  
is pointed at [A-  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
NOTES  
1
P3LAY  
• To turn off the play mode menu  
STOP  
7
Press PLAY MODE - CANCEL.  
MENU  
UP  
• If  
playback  
appears when pressing ENTER in step 2 during DVD  
LEFT  
CURSOR RIGHT  
DOWN  
2, 3  
You cannot repeat the selected portion because of the  
disc contents.  
REMOTE CONTROL  
• The A-B REPEAT function cannot be used during program  
playback.  
7 During playback  
Press PLAY MODE - CANCEL.  
The play mode menu appears on the TV screen.  
1
Use CURSOR 2/3 to move  
to [A-B  
2
REPEAT], then press ENTER at the beginning  
of the part you want to repeat (point A).  
Make sure that REPEAT mode is off. If any one of  
the REPEAT modes is selected, you cannot move  
to [A-B REPEAT].  
Press ENTER at the end of the part you want  
to repeat (point B).  
3
The unit locates “A” and starts repeat playback  
between “A” and “B.”  
(for DVD VIDEO)  
(for Audio CD)  
DVD CONTROL  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
REPEAT A-B REPEAT TIME SEARCH  
A 0:00:16  
B 0:01:16  
A 0:00:16  
B 0:01:31  
Point A Point B  
Point A Point B  
(for Video CD)  
VCD CONTROL  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
A 0:00:16  
B 0:01:31  
Point A Point B  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
To select a scene angle from the angle  
list display [ANGLE]  
Selecting a scene angle of  
DVD VIDEO  
You can enjoy a variety of scene angles if the DVD  
VIDEO disc contains “multi-angle” parts, where  
multiple cameras were used to shoot the same scene  
from different angles.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
1
2
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
At the beginning of “multi-angle” parts,  
screen.  
appears on the TV  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
STOP  
7
MENU  
To select a scene angle from the normal  
screen [ANGLE]  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
3
REMOTE CONTROL  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
7 During DVD VIDEO playback  
1
2
3
1
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
Press and hold ANGLE - ZOOM for more than  
1 second.  
Up to nine camera  
angles recorded on  
a disc appear on the  
TV screen.  
7
TV  
8
TV  
1
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
P3LAY  
¢
4
STOP  
7
8
UP  
LEFT  
CURSOR RIGHT  
DOWN  
2
REMOTE CONTROL  
The selected camera angle  
Use CURSOR 5//2/3 to select the desired  
2
3
7 During DVD VIDEO playback  
angle.  
Press ANGLE - ZOOM.  
1
Press ENTER.  
The Angle selectin  
display appears on  
the TV screen.  
1 / 3  
7 The selected angle appears on the TV screen.  
NOTES  
• When  
appears on the TV screen in step 1:  
The current scene is not recorded from multiple angles.  
Press ANGLE - ZOOM or CURSOR 2/3 to  
2
• During the operation above, audio is muted.  
select the desired angle.  
Each time you press  
ANGLE or CURSOR 2/3,  
the angle changes.  
Example:  
1 / 3  
2 / 3  
3 / 3  
NOTES  
• The Angle selection display will automatically disappear  
if you do not change the angle for 10 seconds.  
• To turn off the Angle selection display manually, press  
ENTER.  
• When  
appears on the TV screen  
The current scene is not recorded from multiple angles.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
To change the audio language or sound  
[AUDIO]  
Changing the language and  
sound  
For DVD VIDEO discs, you can select the subtitle  
language, as well as the audio language/sound  
included on a disc.  
By AUDIO selection, you can choose the audio  
language of movies or choose to enjoy karaoke with or  
without the vocal.  
For Video CD discs, you can select the audio channel(s).  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
To select the subtitle language [SUBTITLE]  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1, 2  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
7 During DVD VIDEO playback  
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV POWER  
THEATER  
OPEN  
TV RETURN  
TV  
0
TV 100+  
/CLOSE 3D-PHONIC POSITION DVD POWER  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1, 2  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
1
2
3
SHIFT  
TV  
1
TV  
2
TV  
3
6
9
P3LAY  
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
STOP  
7
7
TV  
8
TV  
10  
0
+10  
MENU  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
UP  
SLOW  
LEFT  
CURSOR RIGHT  
DOWN  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
2
P3LAY  
REMOTE CONTROL  
STOP  
7
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
7 During playback  
3
Press AUDIO - STROBE.  
The Audio selection display appears on the TV  
screen.  
REMOTE CONTROL  
1
Press SUBTITLE.  
The Subtitle selection  
display appears on the  
TV screen.  
1
(DVD VIDEO)  
(Video CD)  
ON  
1 / 3  
ENGLISH  
1 / 3  
ENGLISH  
STEREO  
Press AUDIO - STROBE or CURSOR 2/3 to  
2
select the desired audio.  
To turn the subtitle on and off, press  
SUBTITLE.  
2
3
• For DVD VIDEO  
Example:  
Each time you press AUDIO  
- STROBE or CURSOR 2/3,  
the audio language or  
sound changes.  
1/3 ENGLISH  
To select the desired subtitle language, press  
CURSOR 2/3.  
2/3 FRENCH  
Example:  
Each time you press  
CURSOR 2/3, the  
subtitle language  
changes.  
1/3 ENGLISH  
2/3 FRENCH  
3/3 SPANISH  
–/3 (off)  
3/3 SPANISH  
• For Video CD  
STEREO  
Each time you press AUDIO  
- STROBE or CURSOR 2/3,  
the playback audio changes  
as follows.  
L
R
NOTES  
NOTES  
• For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See “Appendix A: Table  
of languages and their abbreviations” at the end of this  
manual.  
• For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See “Appendix A: Table  
of languages and their abbreviations” at the end of this  
manual.  
• The Subtitle selection display will automatically  
disappear if you do not change the subtitle for 10  
seconds.  
• The Audio selection display will automatically disappear  
if you do not change the audio for 10 seconds.  
• To turn off the Audio selection display manually, press  
ENTER.  
• To turn off the Subtitle selection display manually, press  
ENTER.  
When  
appears on the TV screen (for a DVD VIDEO disc):  
• When  
appears on the TV screen:  
You cannot select the audio.  
You cannot select the subtitle.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
Selecting the picture  
character  
You can select the quality of the image from among  
four options (OFF, 1, 2 and 3) according to the type of  
programming, picture tone or personal preferences.  
Enjoying virtual surround  
sound  
Using the 3D Phonic function, you can get a simulated  
surround effect from your stereo system.  
To simulate surround sound [3D PHONIC]  
To select the picture character [THEATER  
POSITION]  
TV POWER  
THEATER  
OPEN  
1, 2  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV POWER  
1
OPEN  
THEATER  
TV  
1
TV  
2
TV  
3
6
9
/CLOSE 3D-PHONIC POSITION DVD POWER  
4
5
6
TV  
TV  
4
TV  
5
TV  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
7
8
9
7
TV  
8
TV  
DIGEST  
STROBE  
ZOOM  
10  
0
+10  
1
2
3
TV RETURN  
TV  
0
TV 100+  
TV  
1
TV  
2
TV  
3
6
9
4
5
6
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
TV  
TV  
4
TV  
5
TV  
7
8
9
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
7
TV  
8
TV  
SHIFT  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
P3LAY  
AMP  
VOL  
TV  
VOL  
TV  
ch  
¢
SLOW  
4
STOP  
7
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
8
SHIFT  
P3LAY  
UP  
¢
4
LEFT  
CURSOR RIGHT  
DOWN  
STOP  
7
8
UP  
REMOTE CONTROL  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
7 During playback  
Press 3D PHONIC.  
1
2
7 During playback  
Press THEATER POSITION to select the  
desired picture character.  
1
Select the desired effect mode by pressing 3D  
PHONIC.  
Each time you press 3D PHONIC, the effect mode  
changes as follows:  
Each time you press the button, the picture  
character changes as follows:  
THEATER 1  
3D PHONIC DRAMA  
Selected picture character  
Selected effect mode  
3D PHONIC ACTION*  
3D PHONIC DRAMA  
3D PHONIC THEATER  
3D PHONIC OFF  
THEATER 1  
“THEATER OFF” is  
THEATER 2  
THEATER 3  
the normal position.  
Selecting a higher  
number tones down  
the picture character.  
THEATER OFF  
• ACTION:  
Suitable for action movies and sports programs in  
which sounds dynamically move.  
• DRAMA:  
Natural and warm sound. You can enjoy movies in a  
relaxed mood.  
• THEATER:  
You can enjoy sound effects like in a major theater in  
Hollywood.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
* When you play a DVD VIDEO disc recorded in Dolby  
Digital which contains more than 2 channels, ACTION  
does not appear.  
Checking the status  
You can check the disc/time information, as well as the  
DVD functions, of the disc.  
NOTES  
• With a Video CD disc, if the AUDIO setting is set to L or  
R, you cannot activate the 3D Phonic function (i.e. the  
3D Phonic mode is fixed to OFF).  
To check the disc/time information  
Conversely, when the 3D Phonic function is active,  
changing the AUDIO setting to L or R from STEREO  
cancels the 3D Phonic function.  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
• The 3D phonic function works correctly when playing  
back discs recorded in the Dolby Surround or Dolby  
Digital 5.1-CH format.  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
It also works when playing back discs other than those  
above, but does not provide the correct effect.  
7
8
9
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
TV  
ch  
• The 3D Phonic function does not affect the DTS or Dolby  
Digital bitstream signal from the DIGITAL OUT jack.  
SLOW  
VOL  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
1
SHIFT  
• The sound effect will not be set or operate, even if 3D  
PHONIC is pressed, for the sound of DVD VIDEO discs  
recorded in Linear PCM.  
P3LAY  
2
STOP  
7
MENU  
UP  
• When you set the 3D PHONIC function to on, the DOWN  
MIX and COMPRESSION settings in the AUDIO page of  
the preference display are disabled.  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
7 During playback  
Press DISPLAY - TIME once for a Audio CD or  
Video CD disc, or twice for a DVD VIDEO disc.  
The disc/time display appears on the TV screen.  
1
During playback of a DVD VIDEO disc, pressing DISPLAY - TIME  
while holding down SHIFT directly turns on the disc/time display.  
(for DVD VIDEO)  
Mbps  
TITLE  
1
CHAP.  
25  
TIME  
2:25:25  
BITRATE  
3.3  
Transmission rate  
Time  
Current chapter number  
Current title number  
(for Audio CD or Video CD playing without PBC)  
TRACK 1  
00:08  
EACH  
TIME  
Time mode  
Time  
Current track number  
(for Video CD playing with PBC)  
1
25:25 PBC  
TRACK  
TIME  
PBC on status  
Time  
Current track number  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Advanced operations  
To change the time display mode (only for  
2
To check the DVD function status  
Audio CD or Video CD without PBC), press  
DISPLAY - TIME while holding down SHIFT.  
The time display mode cycles as below.  
7 During DVD VIDEO playback  
TV POWER  
THEATER  
(for Audio CD)  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
EACH  
(current track elapsed time)  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
EACH REMAIN  
(current track remaining time)  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
TOTAL  
(disc elapsed time)  
1
P3LAY  
STOP  
7
MENU  
TOTAL REMAIN  
(disc remaining time)  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
REMOTE CONTROL  
(for Video CD without PBC)  
EACH  
(current track elapsed time)  
Press DISPLAY – TIME.  
The DVD function status display appears on the  
TV screen.  
1
EACH REMAIN  
(current track remaining time)  
The selected time information is displayed on the  
TV screen, as well as in the front panel display  
window.  
1 / 2  
1 / 2  
1 / 2  
ENGLISH ENGLISH  
7 While stopped  
You can check the total disc time and current (selected)  
track time of an Audio CD/Video CD only from the front  
panel display window.  
The current selections of the camera angle, audio  
language and subtitle language are displayed.  
Press DISPLAY - TIME while holding down  
1
SHIFT.  
To turn off the DVD function status display  
Press DISPLAY-TIME twice.  
When EACH and REMAIN are indicated, the  
current (selected) track time appears. When only  
REMAIN is indicated, the total disc time appears.  
You can change the current (selected) track by pressing 4 or  
¢.  
To turn off the disc/time display  
Press DISPLAY-TIME.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001B  
Initial settings  
I
Press CURSOR 2/3 to select the setting you  
3
Selecting preferences  
You can set various preferences for playback via four  
dedicated displays.  
want.  
To turn off the preference display, press RETURN-CHOICE  
while holding down SHIFT, or move  
press ENTER.  
to [EXIT] and  
• For details about each setting, see the following  
paragraphs:  
How to set preferences  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
LANGUAGE page  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
MENU LANGUAGE  
TV  
TV  
4
TV  
5
TV  
7
8
9
7
TV  
8
TV  
You can select the default “display” language to be  
displayed if it is contained on the disc.  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
SHIFT  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
1
3
Each time you press  
CURSOR 3, the language  
setting changes in the  
following order:  
P3LAY  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
STOP  
7
MENU  
ON SCREEN LANGUAGE  
2
UP  
EXIT  
LEFT  
CURSOR RIGHT  
DOWN  
PRESS  
KEY  
REMOTE CONTROL  
ENGLISH = SPANISH = FRENCH = CHINESE =  
GERMAN = ITALIAN = JAPANESE = language code  
from AA to ZU  
When a DVD or Video CD disc is stopped or  
no disc is inserted, press RETURN-CHOICE  
while holding down SHIFT.  
1
(See “Table of languages and their abbreviations” at  
the end of this manual.)  
Pressing CURSOR 2 changes the language setting in  
the reverse order of the above.  
One of the preference pages appears on the TV  
screen.  
There are four preference pages: LANGUAGE,  
AUDIO, DISPLAY and SYSTEM. To turn the page,  
* If the selected language is not recorded, the disc’s  
default display language will be displayed.  
move  
to the desired tab using CURSOR 2/3.  
AUDIO LANGUAGE  
LANGUAGE  
AUDIO  
You can select the default audio language to be played  
if it is contained on the disc.  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
DOLBY  
ENGLISH  
DIGITAL /PCM  
Lo / Ro  
ON  
MENU ANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
DIGITAL AUDIO OUTUT  
DOWN MIX  
ENGLISH  
ENGLISH  
ENGLISH  
COMPRESSION  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ON SCREEN LANGUAGE  
Each time you press  
CURSOR 3, the language  
setting changes in the  
following order:  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
EXIT  
EXIT  
ENGLISH  
ENGLISH  
ENGLISH  
PRESS  
KEY  
PRESS  
KEY  
ON SCREEN LANGUAGE  
EXIT  
DISPLAY  
SYSTEM  
PRESS  
KEY  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
4LB  
OFF  
ON  
OFF  
OFF  
MONITOR TYPE  
AUTO STANDBY  
RESUME  
AV COMPULINK MODE  
SCREEN SAVER  
ENGLISH = SPANISH = FRENCH = CHINESE =  
GERMAN = ITALIAN = JAPANESE = language code  
from AA to ZU  
DVD 1  
ON SCREEN GUIDE  
*
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
(See “Table of languages and their abbreviations” at  
the end of this manual.)  
* The “AV COMPULINK  
MODE” selection is not  
available with the XV-  
421BK.  
Pressing CURSOR 2 changes the language setting in  
the reverse order of the above.  
* If the selected language is not recorded, the disc’s  
default audio language will be played.  
Move  
to select the item you want to set  
2
by using CURSOR 5/.  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ON SCREEN LANGUAGE  
EXIT  
PRESS  
KEY  
35  
EN35-40.XV-521BK[J]  
35  
00.4.19, 1:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Initial settings  
SUBTITLE  
AUDIO page  
You can select the default subtitle language to be  
displayed if it is contained on the disc.  
DIGITAL AUDIO OUTPUT  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
To connect the unit‘s  
digital output to an  
external device equipped  
with a digital input, this  
item must be set  
Each time you press  
CURSOR 3, the language  
setting changes in the  
following order:  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
DOLBY  
DIGITAL /PCM  
Lo / Ro  
ON  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
ENGLISH  
ENGLISH  
ENGLISH  
COMPRESSION  
ON SCREEN LANGUAGE  
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
correctly.  
• PCM ONLY:  
ENGLISH = SPANISH = FRENCH = CHINESE =  
GERMAN = ITALIAN = JAPANESE = language code  
from AA to ZU  
When you connect the DIGITAL OUT jack of the unit to  
the linear PCM digital input of other audio equipment.  
(See “Table of languages and their abbreviations” at  
the end of this manual.)  
• STREAM/PCM:  
When you connect to the digital input of an amplifier  
to a built-in DTS, Dolby Digital, or MPEG  
multichannel decoder.  
Pressing CURSOR 2 changes the language setting in  
the reverse order of the above.  
* If the selected language is not recorded, the disc’s  
default subtitle language will be displayed.  
• DOLBY DIGITAL/PCM:  
When you connect to the digital input of a Dolby  
Digital decoder, or an amplifier with a built-in Dolby  
Digital decoder.  
ON SCREEN LANGUAGE  
You can select the on-screen display language to be  
displayed.  
The following chart shows the relationship between  
types of playback discs and output signals.  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
Each time you press  
CURSOR 3, the language  
setting changes as  
follows:  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
Playback discs  
Output  
ON SCREEN LANGUAGE  
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY  
EXIT  
48-kHz,  
16-bit linear  
PCM  
PRESS  
KEY  
DVD with 48-kHz,  
16-bit linear PCM  
ENGLISH  
48-kHz,  
20-bit linear  
PCM  
DVD with 48-kHz,  
20/24-bit linear  
PCM  
ESPAÑOL (Spanish)  
FRANCAIS (French)  
No output  
No output  
DVD with 96-kHz,  
linear PCM  
DTS  
bitstream  
DVD with DTS  
English  
Spanish  
French  
ON SCREEN LANGUAGE  
IDIOMA EN PANTALLA  
LANGUE D’ECRAN  
ENGLISH  
48-kHz, 16-bit  
linear PCM  
Dolby Digital  
bitstream  
DVD with Dolby  
Digital  
ESPAÑOL  
FRANCAIS  
48-kHz, 16-bit  
linear PCM  
MPEG  
bitstream  
DVD with MPEG  
multichannel  
44.1-kHz,  
16-bit linear  
PCM  
Video CD  
Pressing CURSOR 2 changes the language setting in  
the reverse order of the above.  
44.1-kHz,  
16-bit linear  
PCM  
Audio CD  
DTS  
bitstream  
Audio CD with  
DTS  
NOTES  
• The unit does not provide the DTS decoding function.  
• When playing a DVD VIDEO or Audio CD disc with DTS,  
use a DTS decoder to get correct signals from your  
speakers. Never use the unit's analog output jacks, which  
output incorrect signals that may damage your speakers.  
If you connect the analog outputs and digital outputs  
simultaneously, be sure to select the source of the  
amplifier correctly, or set the level control of the amplifier  
connected to the analog outputs to minimum.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Initial settings  
DOWN MIX  
To playback a DVD VIDEO  
disc recorded with  
surround multichannel  
audio correctly, the DOWN  
MIX setting must be  
properly made according  
to your audio system.  
Note that this setting affects the output signal from the  
AUDIO (both DIGITAL and ANALOG) output jacks when  
playing back a DVD VIDEO disc recorded with surround  
multichannel audio.  
DISPLAY page  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
DOLBY  
DIGITAL /PCM  
Lo / Ro  
ON  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
MONITOR TYPE  
COMPRESSION  
You can select the monitor  
type to match your TV  
when you playback DVD  
VIDEO discs recorded for  
wide screen televisions.  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
LANGUAGE  
EXIT  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
OFF  
ON  
PRESS  
KEY  
EXIT  
PRESS  
KEY  
• 4:3 LB  
(Letter Box Conversion)  
When you connect a normal TV  
to the unit.  
• Lt/Rt  
When you play a wide picture  
recorded on a DVD VIDEO disc,  
the picture is displayed with  
bands across the upper and  
lower portions of the screen.  
When you enjoy multichannel surround audio by  
connecting the unit’s AUDIO output (normally, the  
DIGITAL output) to a surround decoder.  
• Lo/Ro  
When you enjoy conventional 2-channel stereo audio  
by connecting the unit’s AUDIO output(s) to a stereo  
amplifier/receiver or television set, or when you  
duplicate audio of a DVD VIDEO disc recorded with  
surround audio to your MD,cassette, etc.  
• 4:3 PS  
(Pan Scan Conversion)  
When you connect a normal TV to the unit.  
When you play a wide picture recorded on a DVD  
VIDEO disc, a portion of the picture is automatically  
cut off from the left and right  
sides of the image.  
Depending on the disc, it may  
NOTE  
The Down mix function does not work when the 3D PHONIC  
function is activated.  
not be possible to playback in  
this mode. In that case, the  
picture is played back as in 4:3  
LB  
mode.  
COMPRESSION  
You can compress the  
dynamic range of the  
sound if needed. Using  
this function, you can  
listen to sound at low  
volumes easily.  
• 16:9 WIDE (Wide Television screen)  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
When you connect a  
wide-screen TV to the  
unit.  
DOLBY  
DIGITAL /PCM  
Lo / Ro  
ON  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
EXIT  
PRESS  
KEY  
• ON  
SCREEN SAVER  
Audio is played back with the dynamic range  
compressed.  
A television monitor screen may be burned out if a  
static picture is displayed for a long time. To prevent  
this, the unit automatically activates the screen saver  
function if a static picture, such as an on-screen display  
or menu, is displayed for over 5 minutes.  
• OFF  
Audio is played back as it was recorded.  
NOTES  
• MODE 1  
The current picture gets  
dark.  
• The Compression function works only when playing back  
a disc recorded with DOLBY DIGITAL 1CH or 2CH. The  
setting is not effective for other discs.  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
LANGUAGE  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
OFF  
ON  
• The Compression function does not work when the 3D  
PHONIC function is activated.  
• MODE 2  
The “screen saver”  
picture appears and its  
brightness changes.  
EXIT  
PRESS  
KEY  
• OFF  
The screen saver function is off.  
NOTES  
• The monitor screen of a projector or projection TV is  
easily burned out if the screen saver mode is set to OFF  
and a static picture is displayed for a long time.  
• The screen saver function is not activated when the  
selected disc is an Audio CD.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Initial settings  
ON SCREEN GUIDE  
SYSTEM page  
The unit can display “on-  
screen guide” icons or  
characters on the picture,  
which show what is  
happening to the disc or  
the unit.  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
LANGUAGE  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
AUTO STANDBY  
OFF  
ON  
When the unit is stopped  
for more than 30 minutes  
or 60 minutes, the unit  
enters standby mode  
automatically.  
(XV-521BK/523GD/525BK)  
EXIT  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
PRESS  
KEY  
OFF  
OFF  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
• ON  
EXIT  
The on-screen guide will be displayed.  
• 60  
PRESS  
KEY  
Time is set to 60 minutes.  
• OFF  
The on-screen guide will not be displayed.  
• 30  
(XV-421BK)  
Time is set to 30 minutes.  
Examples of “on-screen guide” icons or characters:  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
OFF  
OFF  
AUTO STANDBY  
RESUME  
,
,
• OFF  
The auto standby function  
is off.  
EXIT  
PRESS  
KEY  
RESUME  
You can select the resume  
function to be on or off.  
See page 19.  
(XV-521BK/523GD/525BK)  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
OFF  
OFF  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
• ON  
Pressing PLAY while  
stopped or on standby  
starts playback from the  
resume point if it is  
memorized.  
EXIT  
PRESS  
KEY  
(XV-421BK)  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
• OFF  
OFF  
OFF  
AUTO STANDBY  
RESUME  
Pressing PLAY while  
stopped or on standby  
starts playback from the  
beginning of the disc.  
EXIT  
PRESS  
KEY  
AV COMPULINK MODE (except XV-421BK)  
If you use the AV  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
Compulink system, you  
must set this item  
correctly.  
OFF  
OFF  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
Select from the three  
options: “DVD1,” “DVD2”  
and “DVD3” according to  
the equipment to be  
connected.  
EXIT  
PRESS  
KEY  
See page 41.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Initial settings  
While  
points [Set Level], use CURSOR  
4
Limiting playback by  
children  
This function restricts playback of DVD VIDEO discs  
which contain violent (and other) scenes according to  
the level set by the user. For example, if a movie which  
includes violent scenes supports the parental lock  
feature, such scenes which you do not want to let  
children view can be cut or replaced with other scenes.  
2/3 to select the parental lock level.  
PARENTAL LOCK  
US  
1
Country Code  
Set Level  
----  
PASS WORD  
EXIT  
PRESS  
KEY  
ENTER  
Each time you press CURSOR 2/3, the parental  
level changes as follows:  
To set Parental Lock for the first time  
[PARENTAL LOCK]  
1
.
.
.
8
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
6
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
“1” is the strictest level. “–” means no restriction.  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
Discs rated higher than the selected level are restricted.  
SHIFT  
1
P3LAY  
¢
4
STOP  
7
8
Press ENTER.  
1, 3, 5, 7  
5
UP  
moves to [PASSWORD].  
LEFT  
CURSOR RIGHT  
DOWN  
2, 4  
Enter your 4-digit password using the  
numeric buttons (0 to 9).  
6
REMOTE CONTROL  
PARENTAL LOCK  
7 While a DVD VIDEO disc is stopped or no disc is  
US  
1
Country Code  
Set Level  
inserted  
----  
PASS WORD  
Press ENTER while holding down SHIFT.  
The Parental Lock on-screen display appears on  
EXIT  
NEW PASSWORD? ··· PRESS 0~9 KEY.  
1
the TV screen.  
points [Country Code].  
Press ENTER.  
The parental level and password are set.  
7
While  
points [Country Code], use  
2
3
moves to [EXIT].  
CURSOR 2/3 to select “US” for country  
Pressing ENTER again returns to the opening  
display.  
code.  
PARENTAL LOCK  
US  
Country Coce  
Set Level  
----  
PASS WORD  
If you enter an undesired password in step 6 above, reenter the  
password before pressing ENTER.  
EXIT  
PRESS  
KEY  
ENTER  
Press ENTER.  
moves to [Set Level].  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Initial settings  
Even if you want to change only the country code  
and/or parental level, do not forget to enter the  
password after changing the country code and/or  
parental level. Otherwise, the new country code  
and/or parental level will not become effective.  
To change the settings [PARENTAL LOCK]  
TV POWER  
THEATER  
OPEN  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
DIGEST  
STROBE  
ZOOM  
1
2
3
TV  
1
TV  
2
TV  
3
6
9
Pressing ENTER again returns to the opening  
display.  
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
2, 5  
7
TV  
8
TV  
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
NOTES  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
• When you enter the wrong password more than 3 times  
SHIFT  
1
in step 2 above,  
moves to [EXIT] automatically and  
P3LAY  
CURSOR 5/does not work.  
• If you forget your password in step 2  
Enter “8888.”  
STOP  
7
1, 2, 3,  
4, 5  
MENU  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
3, 4  
REMOTE CONTROL  
To temporarily release the Parental lock  
[PARENTAL LOCK]  
You can change the Parental lock settings later.  
TV POWER  
OPEN  
THEATER  
/CLOSE 3D-PHONIC POSITION DVD POWER  
SUBTITLE AUDIO  
ANGLE TV/VIDEO  
7 While a DVD VIDEO disc is stopped or no disc is  
DIGEST  
STROBE  
ZOOM  
1
2
3
inserted  
TV  
1
TV  
2
TV  
3
6
9
4
5
6
TV  
TV  
4
TV  
5
TV  
7
8
9
2
1
7
TV  
8
TV  
Press ENTER while holding down SHIFT.  
1
10  
0
+10  
TV RETURN  
TV  
0
TV 100+  
AMP  
VOL  
TV  
VOL  
TV  
ch  
SLOW  
The Parental Lock  
PARENTAL LOCK  
PLAY MODE DISPLAY RETURN  
CANCEL TIME CHOICE  
on-screen display  
appears on the TV  
screen.  
US  
1
SHIFT  
Country Code  
Set Level  
P3LAY  
----  
PASS WORD  
STOP  
7
MENU  
EXIT  
NEW PASSWORD? ··· PRESS 0~9 KEY.  
points  
UP  
LEFT  
CURSOR RIGHT  
DOWN  
[PASSWORD].  
REMOTE CONTROL  
Enter your current 4-digit password using the  
numeric buttons (0 to 9) and press ENTER.  
moves to [Country Code] if you enter the  
correct password.  
2
3
When you set the parental level strictly, some discs  
may not be played back at all. When you insert such a  
disc and try to play it, the following Parental Lock on-  
screen display appears on the TV screen, asking you  
whether you want the parental lock to be temporarily  
released or not.  
If you enter the wrong password, “WRONG!  
RETRY……” appears on the TV screen, and you  
cannot go to next step.  
Use the CURSOR 5/to move  
then press ENTER.  
to [YES],  
1
To change the country code, use CURSOR 2/  
3 to select the desired country code and  
press ENTER.  
moves to the  
PASSWORD field.  
PARENTAL LOCK  
This DISC can’t play now!  
Temporary  
Level Change ?  
moves to [Set Level].  
YES  
NO  
When selecting  
[NO], press OPEN/  
CLOSE to remove the  
disc.  
– – – –  
PASSWORD  
When you change the country code, you must  
select the parental level.  
PRESS ENTER  
EXECUTE  
To change the set level, use CURSOR 2/3 to  
4
5
select the desired level while  
Level], and then press ENTER.  
moves to [PASSWORD].  
points [Set  
Enter your 4-digit password using the  
numeric buttons (0 to 9).  
If you enter the wrong password, “WRONG!  
RETRY…” appears on the TV screen, and you  
cannot go to next step.  
2
Enter the password using the numeric  
buttons (0 to 9) and press ENTER.  
moves to [EXIT].  
The Parental lock is released, and the unit starts  
playback.  
The password entered in the above step becomes  
the new password. If you do not change the  
password, enter the same password as in the step  
2.  
NOTE  
When you enter the wrong password more than 3 times in  
step 2 above, moves to [NO] automatically and  
CURSOR 5/do not work.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
AV COMPU LINK remote control system (not available with  
XV-421BK)  
When you buy a separate TV, VCR, DVD player, receiver, or other component and  
connect them to each other, you have to operate each component individually. JVC’s  
AV COMPU LINK remote control system meets the demands of a system made up of  
single components and has the ease of operation of a single unit.  
Connection and setup  
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.  
To AV COMPU LINK (II or EX)  
TV  
DVD player  
• If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as  
follows.  
• When connecting to VIDEO-1 input terminal of the television: DVD2  
• When connecting to VIDEO-2 input terminal of the television: DVD3  
To AV COMPU LINK (II or EX)  
To AV COMPU LINK  
TV  
VCR (Video Cassette Recorder)  
DVD player  
• If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and  
DVD player’s AV COMPU LINK setting as follows.  
• When connecting to VIDEO-1 input terminal of the television:  
DVD player’s AV COMPU LINK setting: DVD2  
VCR’s Remote Control Code: B  
• When connecting to VIDEO-2 input terminal of the television:  
DVD player’s AV COMPU LINK setting: DVD3  
VCR’s Remote Control Code: A  
To AV COMPU LINK (II or EX)  
TV  
Receiver  
DVD player  
• If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK  
setting to DVD1.  
• The DVD player’s AV COMPU LINK setting is operated in the SYSTEM page of the preference display.  
See page 38 for operation.  
• For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions.  
IMPORTANT!  
If you connect the component video output to your TV:  
• set the DVD player’s AV COMPULINK setting to DVD1.  
• make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable,  
and do not make the S-VIDEO connection.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
Notes for connection  
If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some  
functions may not be performed automatically.  
The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II”  
with the AV COMPU LINK terminal on a receiver. If connected, the system will not work correctly.  
Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.”  
Otherwise, the system will not work correctly.  
There may be no description about connections to a DVD player in the instruction manual of a television or VCR.  
However a television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD  
player.  
Operation  
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound  
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to  
perform power switching.  
Turn on the main power of the television.  
1
Insert a disc into the source component.  
2
Press PLAY of the source component.  
3
The following actions are performed automatically:  
Turning on the power for the television.  
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).  
Turning on the power for the receiver.  
• Setting the source of the receiver to the component which has started playback.  
Care and handling of discs  
How to handle discs  
When handling a disc, do not touch the surface of the disc.  
Since discs are made of plastic, they are easily damaged.  
If a disc gets dirty, dusty, scratched or warped, the images  
and sound will not be picked up correctly, and such a disc  
may cause the player to malfunction.  
Label side  
Do not damage the label side, stick paper to or use any adhesive on its surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases,  
they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place  
where the humidity or temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
If there are fingerprints or other dirt adhering to a disc,  
wipe with a soft dry cloth, moving from the center outwards.  
If a disc is difficult to clean, wipe with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
CAUTION  
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to  
industry standards.)  
These symptoms are caused by the discs, not by the malfunction of the unit.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting  
service.  
Symptom  
Possible case  
Remedy  
Power does not come on.  
Remote control does not work.  
Power plug is not inserted securely.  
Too far from the unit.  
Plug in securely.  
More closer to the unit.  
The tip of the remote unit is not  
pointed in the right direction.  
Point the infrared light- emitting window  
toward the remote sensor on the front panel.  
Batteries are exhausted.  
Replace the batteries with new ones.  
Battery polarity is incorrect.  
Take out the batteries and insert them again  
in the correct direction.  
No picture is displayed on the  
monitor.  
Connection of video cable is  
incorrect.  
Connect the cable correctly.  
Input selection of TV is incorrect.  
Disc is not playable.  
Select correctly.  
Use a playable disc. (See page 11.)  
Picture is noisy.  
The unit is connected to a VCR  
directly and the copyguard function  
is activated.  
Connect the unit so that the picture signal  
flows directly to the TV.  
No audio is reproduced.  
Connection is incorrect.  
Check the connections.  
Select correctly.  
Input selection of amplifier is  
incorrect.  
No audio is reproduced when  
playing back a DVD disc recorded unit's DIGITAL OUT.  
with 96-kHz, linear PCM audio.  
The audio signal is derived from the  
Use the AUDIO OUT when playing back such  
discs.  
Sound is distorted or noise is  
generated.  
Disc is dirty.  
Wipe the disc surface.  
Picture does not fit the television MONITOR TYPE is not correctly set.  
Select monitor type correctly. (See page 37.)  
Set the television correctly.  
screen.  
Television is not correctly set.  
Operation is not possible.  
Microcomputer malfunction due to  
lightning or static electricity.  
Turn off the power and unplug the power  
cord, then connect the power cord again.  
Moisture condensation caused by a  
sudden change of temperature or  
humidity.  
Turn off the power, then turn it on a few hours  
later.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
Specifications  
General  
Readable discs:  
Video format:  
DVD VIDEO, Audio CD, Video CD  
NTSC  
Other  
Power requirements:  
Power consumption:  
Mass:  
AC 120V  
, 60Hz  
16 W (POWER ON), 3.0 W (STANDBY mode)  
3.2 kg (7.1 lbs)  
Dimensions (W x H x D):  
XV-521BK/XV-523GD/XV-525BK:  
435 x 95 x 297 mm  
(17-3/16 x 3-3/4 x 11-3/4 inch)  
XV-421BK:  
435 x 95 x 288 mm  
(17-3/16 x 3-3/4 x 11-3/8 inch)  
Video output  
COMPONENT (pin jacks):  
Y Output:  
1.0 Vp-p (75 )  
PB/PR Output: 0.7 Vp-p (75 )  
1.0 Vp-p (75 )  
VIDEO OUT (pin jack):  
S-VIDEO OUT (S jack):  
Y Output:  
C Output:  
500 Lines  
65 dB  
1.0 Vp-p (75 )  
286 mVp-p (75 )  
Horizontal resolution:  
Signal to noise ratio:  
Audio output  
ANALOG OUT (pin jack):  
2.0 Vrms (10 k)  
DIGITAL OUT:  
COAXIAL:  
OPTICAL:  
0.5 Vp-p (75 termination)  
– 21 to –15 dBm (Peak) (except XV-421BK)  
Audio characteristics  
Frequency response:  
CD  
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz  
DVD  
DVD  
(sampling frequency 48 kHz):  
(sampling frequency 96 kHz):  
2 Hz to 22 kHz  
2 Hz to 44 kHz  
Dynamic range:  
16 bit: More than 98 dB  
20 bit: More than 106 dB  
24 bit: More than 106 dB  
Unmeasurable (less than 0.002%)  
Less than 0.002%  
Wow and flutter:  
Total harmonic distortion:  
* Specifications and appearance subject to change without prior notice.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
Appendix A: Table of languages and their abbreviations  
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To  
select the desired language, select the abbreviation corresponding the language you want to.  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
Afar  
IK  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Inupiak  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
SK  
SL  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Kirghiz  
Latin  
Lingala  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay (MAY)  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
LV  
MG  
MI  
Telugu  
Tajik  
Thai  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
OM  
OR  
PA  
EO  
ET  
EU  
FA  
FI  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Zulu  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
PL  
PS  
PT  
QU  
RM  
IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
Additional information  
Appendix B: Country code list for parental lock  
This list is used for the parental Lock operation. For details, see page 39.  
ES  
ET  
FI  
Spain  
AD  
AE  
AF  
AG  
AI  
Andorra  
SA  
SB  
SC  
SD  
SE  
SG  
SH  
SI  
Saudi Arabia  
Solomon Islands  
Seychelles  
LB  
Lebanon  
Ethiopia  
Finland  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
LC  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
LI  
FJ  
FK  
Fiji  
Sudan  
LK  
Falkland Islands  
(Malvinas)  
Sweden  
LR  
AL  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
Albania  
Singapore  
LS  
Lesotho  
FM  
Micronesia  
Armenia  
Saint Helena  
Slovenia  
LT  
Lithuania  
Luxembourg  
Latvia  
(Federated States of)  
Netherlands Antilles  
Angola  
LU  
LV  
FO  
FR  
Faroe Islands  
France  
SJ  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SV  
SY  
SZ  
Svalbard and Jan Mayen  
Slovakia  
Antarctica  
Argentina  
American Samoa  
Austria  
LY  
Libyan Arab Jamahiriya  
Morocco  
FX  
France, Metropolitan  
Gabon  
Sierra Leone  
San Marino  
Senegal  
MA  
MC  
MD  
MG  
MH  
ML  
MM  
MN  
MO  
MP  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
Monaco  
United Kingdom  
Grenada  
Moldova, Republic of  
Madagascar  
Marshall Islands  
Mali  
Australia  
Somalia  
Georgia  
Aruba  
Suriname  
French Guiana  
Ghana  
Azerbaijan  
Bosnia and Herzegovina  
Barbados  
Sao Tome and Principe  
El Salvador  
Syrian Arab Republic  
Swaziland  
Myanmar  
Mongolia  
Macau  
Gibraltar  
GL  
GM  
GN  
GP  
GQ  
Greenland  
Gambia  
Bangladesh  
Belgium  
Northern Mariana  
Islands  
TC  
TD  
TF  
Turks and Caicos Islands  
Chad  
Guinea  
Burkina Faso  
Bulgaria  
Guadeloupe  
Equatorial Guinea  
French Southern  
Territories  
MQ  
MR  
MS  
MT  
MU  
MV  
MW  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
Martinique  
Mauritania  
Montserrat  
Malta  
BG  
BH  
BI  
Bahrain  
GR  
GS  
Greece  
TG  
TH  
TJ  
Togo  
Burundi  
South Georgia and the  
South Sandwich Islands  
Thailand  
Tajikistan  
Tokelau  
Turkmenistan  
Tunisia  
BJ  
Benin  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
Bermuda  
GT  
Guatemala  
Guam  
TK  
TM  
TN  
TO  
TP  
TR  
Brunei Darussalam  
Bolivia  
GU  
GW  
Malawi  
Guinea-Bissau  
Mexico  
Brazil  
GY  
HK  
HM  
Guyana  
Tonga  
Malaysia  
Bahamas  
Hong Kong  
East Timor  
Turkey  
Mozambique  
Namibia  
Bhutan  
Heard Island and  
McDonald Islands  
Bouvet Island  
Botswana  
Belarus  
TT  
Trinidad and Tobago  
Tuvalu  
New Caledonia  
Niger  
HN  
HR  
HT  
HU  
ID  
Honduras  
Croatia  
Haiti  
TV  
TW  
Taiwan, Province of  
China  
Norfolk Island  
Nigeria  
Belize  
NG  
NI  
Canada  
Hungary  
Indonesia  
Ireland  
TZ  
Tanzania, United  
Republic of  
Nicaragua  
Netherlands  
Norway  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
NL  
IE  
UA  
UG  
UM  
Ukraine  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
CG  
CH  
CI  
IL  
Israel  
Uganda  
Nepal  
Switzerland  
Côte d’Ivoire  
Cook Islands  
Chile  
IN  
IO  
India  
United States Minor  
Outlying Islands  
Nauru  
British Indian Ocean  
Territory  
Niue  
CK  
CL  
US  
United States  
Uruguay  
New Zealand  
Oman  
IQ  
Iraq  
UY  
UZ  
VA  
CM  
CN  
CO  
CR  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
DK  
DM  
DO  
DZ  
EC  
EE  
Cameroon  
China  
IR  
Iran (Islamic Republic of)  
Iceland  
Uzbekistan  
Panama  
IS  
Vatican City State  
(Holy See)  
PE  
Peru  
Colombia  
IT  
Italy  
PF  
French Polynesia  
Papua New Guinea  
Philippines  
Pakistan  
Costa Rica  
Cuba  
VC  
Saint Vincent and the  
Grenadines  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
Jamaica  
Jordan  
PG  
PH  
Cape Verde  
Christmas Island  
Cyprus  
VE  
VG  
VI  
Venezuela  
Japan  
PK  
Virgin Islands (British)  
Virgin Islands (U.S.)  
Kenya  
PL  
Poland  
Kyrgyzstan  
Cambodia  
Kiribati  
PM  
Saint Pierre and  
Miquelon  
Czech Republic  
Germany  
VN  
VU  
WF  
Vietnam  
Vanuatu  
PN  
PR  
Pitcairn  
Djibouti  
Wallis and Futuna  
Islands  
KM  
Comoros  
Puerto Rico  
Portugal  
Palau  
Denmark  
KN  
KP  
Saint Kitts and Nevis  
Korea, Democratic  
People’s Republic of  
PT  
Dominica  
WS  
YE  
Samoa  
PW  
PY  
Dominican Republic  
Algeria  
Yemen  
Paraguay  
Qatar  
YT  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
KR  
Korea, Republic of  
Kuwait  
QA  
RE  
Ecuador  
YU  
ZA  
ZM  
ZR  
KW  
Réunion  
Estonia  
KY  
KZ  
LA  
Cayman Islands  
Kazakhstan  
RO  
RU  
RW  
Romania  
Russian Federation  
Rwanda  
EG  
EH  
ER  
Egypt  
Western Sahara  
Eritrea  
Lao People’s Democratic  
Republic  
Zaire  
ZW  
Zimbabwe  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE : 1-800-537-5722  
Dear customer:  
In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event  
that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within  
the Continental United States, Call 1-800-537-5722 for your authorized servicer. Remember to retain you Bill of Sale for  
Warranty Service.  
—JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
FACTORY SERVICE CENTER LOCATIONS  
705 Enterprise Street  
Aurora, IL 60504-8149  
(630) 851-7855  
10 New Maple Avenue  
Pine Brook, NJ 07058-9641  
(973)396-1000  
1500 Lakes Parkway  
Lawrenceville, GA 30243-5857  
(770) 339-2582  
10700 Hammerly, Suite 110  
Houston, TX 77043  
(713) 935-9331  
5665 Corporate Avenue  
Cypress, CA 90630-0024  
(714) 229-8011  
2969 Mapunapuna Place  
Honolulu, HI 96819-2040  
(808) 833-5828  
890 Dubuque Avenue  
South San Francisco, CA 94080-1804  
(650) 871-2666  
13 Cummings Park  
Woburn, MA 01801  
(781)376-9100  
8192 State Road 84  
Davie, FL 33324  
(954) 472-1960  
Sophisticatedelectronicproductsmayrequireoccasionalservice.Justasqualityisakeywordintheengineeringandproduction  
of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.  
The JVC service and engineering organization stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF JVC AMRICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
If you ship the product • • •  
Don’t service it yourself.  
Pack your JVC unit in the original carton or one of  
equivalent size and strength. Enclose, with the unit, a  
letterstatingtheproblemorsymptomthatexistsandalso  
CAUTION  
a copy of the receipt or bill of sale you received when you  
purchasedyourJVCunit. Printyourhomereturnaddress  
on the outside and the inside of the carton. Send to the  
appropriate JVC Factory Service Center as listed above.  
To prevent electrical shock, do not open the cabinet. No user  
serviceable parts inside.  
Refer servicing to qualified service personnel.  
ACCESSORIES  
To purchase accessories for your JVC product, you may contact your local JVC Dealer.  
Or from the 48 Continental United States call toll free : 800-882-2345  
(1099)  
BT-51005-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001A  
LIMITED WARRANTY CONSUMER VIDEO 1-90  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL  
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail  
purchase for the period as shown below. (“The Warranty Period.”)  
PARTS  
LABOR  
1 YR  
90 DAYS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN  
COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such  
repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.  
Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be  
brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and  
above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized  
service center, please call toll free: (800)537-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of  
your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location  
of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to  
render such service, or if affixed to any attachment not provided with the products, or if the model number or serial number  
has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase;  
7. Accessories;  
8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase);  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARCHANTABILITY, IS  
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO  
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET  
FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied  
warranty last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you  
may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF  
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.:  
Serial No.:  
Purchase date:  
Name of dealer:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XV-521BK [J] EN  
LVT0435-001B  
VICTOR COMPANY OF JAPAN, LIMITED  
J
C
V
0400RIMUBNJSC  
EN.  
EN XV-521BK[J]COVER-B  
2
00.4.19, 11:50 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Refrigerator RG1140 User Manual
Init TV Video Accessories IT TVGLS101 User Manual
Insignia Automobile Parts NS MB5000 C User Manual
Insignia Fan NS FANT4 B User Manual
Insignia MP3 Docking Station NS B2113 User Manual
John Lewis Range JLBIGH601 User Manual
JVC Speaker System SP F303C User Manual
JVC Stereo System CA DXU8 User Manual
Kawasaki Motorcycle Ninja User Manual
Kodak Film Camera 160NC User Manual